Samsung SV-2313X Instruction manual

VIDEO
CASSETTE RECORDER
SV-635X
SV-631X
SV-6315X
SV-6313X
SV-530X
SV-435X
SV-431X
SV-235X
SV-231X
SV-2315X
SV-2313X
Instruction Manual
www.samsungvcr.com
PAL
About this manual
Contents
GB
Thank you for purchasing a Samsung Video Cassette Recorder (VCR).
Your Owner’s Instructions contain much valuable information on setting up and
using your VCR. Please take the time to read them as they will help you take full
advantage of your VCR’s features.
◆ FOREWORD
■
Safety Instructions .........................................................................................
5
◆ VCR OVERVIEWS
■
The instructions in this manual are for models, SV-635X, SV-631X, SV-6315X,
SV-6313X, SV-530X, SV-435X, SV-431X, SV-235X, SV-231X, SV-2315X and SV-2313X.
Before you start reading this manual please check your model number.
It is displayed on the rear of the VCR.
■
■
■
■
■
Front View of the VCR...................................................................................
Rear View of the VCR ...................................................................................
Infrared Remote Control (SV-635X) ..............................................................
Infrared Remote Control (SV-631X/SV-6315X/SV-6313X/SV-530X/
SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X) ......................
Display Indicator ............................................................................................
Accessories ...................................................................................................
6
6
7
7
8
8
◆ CONNECTING YOUR VIDEO CASSETTE RECORDER
- ★(SV-635X): Exceptions only for a certain model, for example SV-635X.
- Gray shaded areas marked with a star indicate instructions that are
only relevant to certain models.
■
■
■
■
■
■
■
Deciding How to Connect Your VCR.............................................................
Connecting Your VCR to the TV using the Coaxial Cable.............................
Connecting Your VCR to the TV using the SCART Cable ............................
Connecting a Decoder for scrambled PAY TV broadcasts............................
Connecting Your VCR to the Satellite receiver or Other Equipment .............
Plug & Auto Set Up........................................................................................
Tuning your Television for the VCR...............................................................
9
10
10
11
12
13
14
◆ SETTING UP YOUR VIDEO CASSETTE RECORDER
Features Chart
Feature
■
■
SV-631X
SV-635X SV-6315X SV-530X SV-435X
SV-6313X
SV-231X
SV-431X SV-235X SV-2315X
SV-2313X
■
■
■
IPC (Intelligent Picture Control)
●
●
●
●
●
●
●
■
Format 16:9
●
●
●
●
●
●
●
■
Changing recording speed (SP/LP)
●
●
●
●
●
Connecting a Decoder for
scrambled PAY TV broadcasts
●
●
●
●
●
Automatic Clock setting
●
●
●
●
SHOWVIEW recording
●
●
●
●
■
■
■
●
●
■
■
●
A2/NICAM
●
Audio Dubbing
●
Dual VCR/TV remote Control
●
Child door Lock
●
Connecting an RCA Audio/Video input
●
Hi-Fi
●
●
●
■
●
■
■
●
■
■
■
2
■
●
●
●
●
●
●
●
●
●
15
15
16
16
17
17
18
19
20
21
22
22
◆ RECORDING TELEVISION BROADCASTS
■
VPS (Video Programme System) /
PDC (Programme Delivery Control)
Inserting Batteries in the Remote Control......................................................
Setting the Date and Time.............................................................................
Displaying/Hiding On-Screen Information .....................................................
Choosing Your Language..............................................................................
Setting the VCR Output Channel...................................................................
Selecting the RF OUT Sound Mode (B/G-D/K) (SV-635X/SV-631X/
SV-6315X/SV-6313X Only) ...........................................................................
Presetting the Stations Automatically ............................................................
Presetting the Stations Manually ...................................................................
Clearing a Preset Station...............................................................................
Changing the Preset Station Table................................................................
Setting the AV2 Connection ..........................................................................
Switching between the TV and VCR Modes..................................................
■
■
■
Selecting the Cassette Type..........................................................................
Selecting the Recording Speed (SV-631X/SV-6315X/SV-6313X/SV-530X/
SV-435X/SV-431X Only) ...............................................................................
NICAM (SV-635X/SV-631X/SV-6315X/SV-6313X Only)...............................
Protecting a Recorded Cassette....................................................................
Recording a Programme Immediately ...........................................................
Recording a Programme with Automatic Stop...............................................
Using the ShowView Feature (SV-635X/SV-530X/SV-435X/SV-235X Only)............
Modifying ShowView Programming (SV-635X/SV-530X/SV-435X/SV-235X Only) ...
Using the Quick Programming Feature .........................................................
Checking a Preset Recording........................................................................
Cancelling a Preset Recording ......................................................................
23
23
24
25
25
26
27
28
29
30
30
3
Contents (cont.)
Safety Instructions
GB
The following illustrations represent precautions.
◆ PLAYING BACK
Playing a Cassette.........................................................................................
Adjusting Picture Alignment Manually ...........................................................
Intelligent Picture Control ..............................................................................
Intelligent Picture Control (SV-631X/SV-6315X/SV-6313X/SV-530X/
SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X Only)..............
FORMAT 16:9 (WIDE SCREEN)...................................................................
Selecting the Colour Mode ............................................................................
Selecting the Audio Output Mode (SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X)...
Selecting the Audio Mute Mode (SV-435X/SV-431X/SV-235X/SV-231X/
SV-2315X/SV-2313X)....................................................................................
■
■
■
■
■
■
■
■
31
31
32
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE VCR. Refer to service personnel.
32
33
33
34
34
10%
75%
40°C
◆ SEARCHING FOR A SEQUENCE
H
Playing a Cassette in Slow Motion ................................................................
Playing a Sequence Frame by Frame ...........................................................
Playing a Sequence at Variable Speeds .......................................................
Searching for a Specific Sequence ...............................................................
Auto Repeat Play...........................................................................................
Interval Repeat Play ......................................................................................
Using the Tape Counter ................................................................................
■
■
■
■
■
■
■
35
35
36
36
37
37
38
◆ ADVANCED RECORDING FEATURES
Connecting an RCA Audio/Video Input Cable (SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X Only) .............................
Using the Assemble Edit Function.................................................................
Recording from Another VCR or Camcorder.................................................
Audio Dubbing a Pre-recorded Cassette (SV-635X Only).............................
■
■
■
■
39
40
40
41
H
5°C
Do NOT expose the VCR to
extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the VCR to
direct sunlight.
Do NOT expose the VCR to
any liquids.
Do NOT place any objects on
the VCR or remote control.
During a storm and/or lightning, unplug the VCR from the
mains socket and aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
◆ OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS
Using the TV Buttons on the Remote Control (SV-635X Only) .....................
Auto Power Off ..............................................................................................
Child door Lock System (SV-635X/SV-530X/SV-435X/SV-235X Only) ........
Technical Specifications ................................................................................
■
■
■
■
42
43
43
44
◆ SOLVING PROBLEMS
Problems and Solutions.................................................................................
TV Frequency Table (System-B/G) ...............................................................
■
■
45
46
Symbols
1
1
☛
➢
★
Press/push
Hold down
Important
Note
Option
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
1 = Step number
4
5
Infrared Remote Control (SV-635X)
Front View of the VCR
SV-435X/SV-235X
GB
SV-635X
STANDBY/ON
BUTTON
EJECT
BUTTON
VIDEO CASSETTE
COMPARTMENT
RECORD
BUTTON
REW
BUTTON
F.F
BUTTON
VCR STANDBY/ON
TV STANDBY/ON
VCR STANDBY/ON BUTTON
TV STANDBY/ON BUTTON
SLOW
SLOW BUTTON
TV
TV BUTTON
SHUTTLE
SHUTTLE BUTTON
VCR
VCR BUTTON
STANDBY/ON
EJECT
EJECT
STANDBY/ON
REW
VIDEO
AUDIO
VIDEO
PLAY
F.F
CLEAR AND RESET BUTTON
L AUDIO R
PROG
AUX
V-LOCK
V-LOCK BUTTON
REC
STOP
INDEX BUTTON
AUX
TUNER, AV1, AV2, AUX SELECTION BUTTON /
REPEAT SELECTION BUTTON
MENU BUTTON
DISPLAY BUTTON
CLR/RST
SV-431X/SV-231X/
SV-2315X/SV-2313X
AUX VIDEO
AUX AUDIO L, R
INPUT SOCKET INPUT SOCKETS
PROGRAMME
SELECTION BUTTONS
STOP
BUTTON
PLAY
BUTTON
AUDIO DUBBING BUTTON
RECORDING SPEED SELECTION BUTTON
SV-631X/SV-6315X/SV-6313X/SV-530X
EJECT
BUTTON
VIDEO CASSETTE
COMPARTMENT
STANDBY/ON
BUTTON
RECORD
BUTTON
FRAME ADVANCE BUTTON
F.ADV
-/-INPUT
PROG/TRK
PROGRAMME SELECTION / TRACKING
BUTTONS
VOLUME BUTTONS
MENU
AU
DI
O
C
RE
AUDIO MODE SELECTION BUTTON
TV/VCR SELECTION BUTTON
TV/VCR
DUB
D
EE
SP
SHOWVIEW BUTTON
REWIND/REVERSE PICTURE
SEARCH BUTTON
(MENU SELECTION BUTTON)
PLAY BUTTON
VOL
INDEX
REPEAT
RECORD BUTTON
AUX VIDEO/AUDIO
INPUT SOCKETS
DISP./
PLAY/PAUSE/STILL BUTTON
(MENU SELECTION UP BUTTON)
FAST-FORWARD/FORWARD
SEARCH BUTTON
(MENU SELECTION BUTTON)
OK BUTTON
OK
STOP BUTTON
(MENU SELECTION DOWN BUTTON)
STANDBY/ON
STANDBY/ON
EJECT
EJECT
REW
PROG
VIDEO
REC
PLAY
F.F
Infrared Remote Control (SV-631X/SV-6315X/SV-6313X/SV-530X/
SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X)
STOP
L AUDIO R
AUX
AUX VIDEO
AUX AUDIO L, R
INPUT SOCKET INPUT SOCKETS
PROGRAM
SELECTION BUTTONS
STOP
BUTTON
REW
BUTTON
F.F
BUTTON
STANDBY/ON
EJECT
STANDBY/ON BUTTON
EJECT BUTTON
SLOW BUTTON
Rear View of the VCR
SLOW
Q-PRO
SHUTTLE
IPC
V-LOCK
DISPLAY
QUICK PROGRAMME BUTTON
SHUTTLE BUTTON
IPC BUTTON
V-LOCK BUTTON
AV2(DECODER/EXT.) SCART
(EURO-21) SOCKET
RCA AUDIO L, R OUTPUT SOCKETS ★(SV-635X/
SV-631X/SV-6315X/SV-6313X/SV-530X ONLY)
CLEAR AND RESET BUTTON
CLR/RST
DISPLAY BUTTON
FRAME ADVANCE BUTTON
F.ADV
INDEX BUTTON
TUNER, AV1, AV2, AUX ★(SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/SV-235X ONLY) SELECTION
BUTTON /
REPEAT SELECTION BUTTON
INPUT
REPEAT
TRK
INDEX
AU
DI
O
C
RE
TV/VCR
MENU BUTTON
RECORD BUTTON
AERIAL IN
CONNECTOR
R
AV2(DECODER/EXT.)
D
EE
SP
RECORDING SPEED SELECTION BUTTON
★(SV-631X/SV-6315X/SV-6313X/SV-530X/
SV-435X/SV-431X ONLY)
OUT
AUDIO
L
TV
AV1(EURO AV)
PROG
MENU
PROGRAMME SELECTION BUTTONS
TRACKING BUTTONS
AUDIO MODE SELECTION BUTTON
(SV-631X/SV-6315X/SV-6313X/SV-530X)
AUDIO MUTE BUTTON (SV-435X/SV-431X/
SV-235X/SV-231X/SV-2315X/SV-2313X)
TV/VCR SELECTION BUTTON
SHOWVIEW
★(SV-530X/SV-435X/SV-235X ONLY)
OK
REWIND/REVERSE PICTURE SEARCH BUTTON
(MENU SELECTION BUTTON)
STOP BUTTON
(MENU SELECTION DOWN BUTTON)
PLAY/PAUSE/STILL BUTTON
(MENU SELECTION UP BUTTON)
FAST-FORWARD/FORWARD
SEARCH BUTTON
(MENU SELECTION BUTTON)
OK BUTTON
AV1(EURO AV) IN/OUT
SCART (EURO-21) SOCKET
6
OUT TO TV
CONNECTOR
7
Display Indicator
Deciding How to Connect Your VCR
GB
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
2
1
◆ Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
4
3
Your VCR is equipped with the following connectors.
IPC +
V
NICAM
7 ★(SV-635X/SV-631X/SV-6315X/
6
5
Connector
Location
Type
AV1
Rear
8 ★(SV-635X/SV-631X/SV-6315X/
SV-6313X ONLY)
Recommended Use
SCART
In/Out
◆ Television
◆ Satellite receiver
◆ Other VCR
SCART
In/Out
◆ Decoder for scrambled Pay TV
broadcasts
Example:
CANAL+.
AV1(EURO AV)
SV-6313X/SV-530X ONLY)
AV2
1
2
3
4
5
6
7
8
Direction
Cassette loaded indicator
VCR indicator
Multi-function display
IPC (Intelligent Picture Control) indicator
Timer indicator
Record indicator
NICAM indicator ★(SV-635X/SV-631X/SV-6315X/SV-6313X ONLY)
Hi-Fi indicator ★(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X ONLY)
Rear
AV2(DECODER/EXT.)
◆ Satellite receiver
◆ Other VCR
OUT TO TV
75 Ω
Rear
Out
◆ Television
TV
coaxial
IN FROM ANT. Rear
75 Ω
coaxial
In
◆ Aerial
◆ Cable television network
AUX
Audio/Video RCA
In
◆ Audio Hi-Fi system
◆ Camcorder
◆ Hi-Fi Stereo VCR
In
◆ Audio system
◆ Camcorder
◆ Other VCR
◆ Satellite receiver
Accessories
Front
VIDEO
L AUDIO R
AUX
★(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)
AUX
You have just purchased a SAMSUNG Video Cassette Recorder (VCR).
Together with your VCR, you will find the following accessories in the box.
REMOTE CONTROL
STA
NDB
Y/O
N
SLO
W
SH
UT
TLE
CLR
/RS
T
Q-P
RO
F.A
DV
INP
UT
REP
EAT
REC
EJE
CT
V-L
OC
K
IPC
DIS
PLA
Y
IND
EX
OWNER’S INSTRUCTIONS
COAXIAL CABLE
RCA AUDIO CABLE
★(SV-635X/SV-631X/
SV-6315X/SV-6313X/
SV-530X ONLY)
VIDEO
ME
NU
★(SV-435X/SV-235X only)
Audio output
Rear
Audio RCA
Out
◆ Audio Hi-Fi system
OUT
R
AUDIO
L
PRO
G
DIO
AU
R
/VC
TV
OK
Audio/Video RCA
AUDIO
AUX
TRK
SPEED
Front
★(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)
☛
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
8
9
Connecting Your VCR to the TV using the Coaxial Cable
Connecting a Decoder for scrambled PAY TV broadcasts
GB
To receive television programmes a signal must be received from
one of the following sources:
◆
◆
◆
◆
ORTIE
D
AUDIO
☛
G
TV
2
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Aerial
DECODER
TV
AV1(EURO AV)
3
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75Ω coaxial socket marked
rear of your VCR.
SCART Cable
Aerial Connector
OUT
R
TV
on the
3
Plug the coaxial cable supplied into the
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the SCART cable
(see section below) if your television is equipped with this type of
connection.
TV
AV2(DECODER/EXT.)
2
AUDIO
L
TV
AV1(EURO AV)
socket on your VCR.
SCART Cable
SORTIE
D
AUDIO
G
TV
3
4
This VCR is fully equipped to receive scrambled Pay TV broadcasts.
CANAL+ or Premiere broadcasts.
Example:
You can:
☛
◆ Record a scrambled programme while watching another channel
◆ Record another channel while watching a scrambled programme
When the DECODER is connected to the AV2 socket, AV2 SET must be set to DEC (see page 22)
Connecting Your VCR to the TV using the SCART Cable
1
Connect the VCR to the television as indicated on page 10.
2
Plug the SCART cable with the decoder into the AV2(DECODER/EXT.) socket on the rear of the VCR.
3
Plug the other end into the decoder.
Aerial
TV
OUT
R
AV2(DECODER/EXT.)
4
AUDIO
L
TV
RF coaxial cable
AV1(EURO AV)
2
3
SCART Cable
You can connect your VCR to the television using the SCART cable if the appropriate input is available on
the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your VCR
☛
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
◆ Make sure that both the television and the VCR are switched off before connecting the cables.
You can connect your VCR to a Hi-Fi system.
Example: You wish to take advantage of the quality of your Hi-Fi stereo system when watching a
programme or recording via your VCR. ★(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)
1
2
3
Connect the coaxial cable as indicated in the above section.
4
Plug the RCA Audio cable with stereo system into the Audio out socket on the rear of the VCR.
★(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X only)
Connect one end of the SCART cable to the AV1(EURO AV) socket on the rear of the VCR.
Plug the other end into the appropriate connector on the television.
10
11
Connecting Your VCR to the Satellite receiver or Other Equipment
Plug & Auto Set Up
GB
You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the
VCR.
After making this connection, select the source by pressing the INPUT button for the AV1 input sources.
Your VCR will automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in memory. The
process takes a few minutes. Your VCR will then be ready for use.
1
Connect the coaxial cable as indicated on page 10.
(Connecting Your VCR to the TV Using the Coaxial Cable)
2
Plug the VCR into the mains. It will automatically tune itself in and
store TV stations in the memory.
3
The process will finish after a few minutes. Then the VCR
automatically switches itself off.
2. By means of RF Coaxial Cable
TV
TV
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,
e.g. re-adjust to channel 33.
2
Aerial
Satellite Receiver or other Equipment
Aerial Connector
2
TV
AV1(EURO AV)
OUT
R
AUDIO
AV2(DECODER/EXT.)
L
TV
AV1(EURO AV)
1
SCART Cable
1. AV2 IN: By means of 21-pin Scart Cable
When the satellite receiver or other equipment is connected to the AV2 socket, AV2 SET must first be
set to EXT. (see page 22)
Plug the SCART Cable with satellite receiver or other equipment into the AV2(DECODER/EXT.) socket on the rear
of the VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
Aerial
Satellite Receiver or other Equipment
2
TV
AV1(EURO AV)
SCART Cable
1
OUT
R
AV2(DECODER/EXT.)
AUDIO
L
TV
AV1(EURO AV)
SCART Cable
12
13
Tuning Your Television for the VCR
★(SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
★(SV-635X)
STANDBY/ON
VCR STANDBY/ON
2
You must tune your television for the VCR only if you are not using
a Scart cable
➢
1
Switch on the television.
2
Switch on the VCR by pressing STANDBY/ON on the front of the
VCR or VCR STANDBY/ON (STANDBY/ON) on the remote
control.
3
Select a programme position on the television to be reserved for
use with your VCR.
4
Insert the video cassette in the VCR. Check that the VCR starts
reading the cassette; if not, press ❿II button.
5
Start a scan on your television or set the television to UHF
channel 36.
6
Fine tune the television until the pictures and sound are obtained
clearly.
7
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the VCR output channel (see Solving Problems section of this
manual).
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
That programme is now reserved for use with your VCR.
Result:
2 SLO
SLO
SHUT
SHUTT
4
OK
14
To view pictures from your VCR when a Scart cable is
used, the television must be set to the audio/video mode
(AV).
Inserting Batteries in the Remote Control
GB
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the video cassette recorder
1
◆ Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your VCR to record a programme automatically
You must set the date and time when:
◆ You purchase the video cassette recorder
◆ The power supply remains off for more than 1 hour
☛
◆ The date and time are set automatically from the
broadcast signal, but this function will not operate if
there is no Teletext signal.★(SV-635X/SV-530X/
SV-435X/SV-235X Only)
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
PROG
OPTIONS
INSTALL
CLOCK
CLOCK
BONUS
LANG
IMPOSTA OROLOGIO
"
❷!!➛❿!!
OK
★(SV-635X/SV-530X/SV-435X/SV-235X)
CLOCK
12:00
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding ", ❷ or ➛, ❿ buttons to select the
IMPOSTA OROLOGIO option.
3
Press the OK button to select this option.
Result:
The IMPOSTA OROLOGIO menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
5
Press the " or ❷ buttons to increase or decrease the value.
The day of the week is displayed automatically.
Result:
➢
6
You can hold the " or ❷ buttons down to scroll more
quickly through the values.
USCITA:MENU
1/GEN/2000
SAB
AGGIORNA ORA : SI
➛❿!!!!!!!!!!!"❷
USCITA:MENU
★(SV-631X/SV-6315X/SV-6313X/SV-431X/
SV-231X/SV-2315X/SV-2313X)
CLOCK
12:00
➛❿!!!!!!!!!!!"❷
1/GEN/2000
SAB
USCITA:MENU
On completion, press MENU twice to exit the menu.
15
Displaying/Hiding On-Screen Information
Setting the VCR Output Channel
GB
Your VCR displays most information both on the VCR and the
television.
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and Showview
★(SV-635X/SV-530X/SV-435X/SV-235X only) function, which
cannot be hidden).
OPTIONS
❿ MENU
DURATA NASTRO
NORMA COLORE
IPC
16:9
NICAM
❿
"
❷
:SI
:E180
:AUTO
:SI
:AUTO
:SI
1
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
2
❿
"
❷
:SI
:E180
:AUTO
:SI
:AUTO
",❷
or ➛, ❿ buttons to select the
Press the OK button to select this option.
The FUNZIONI menu is displayed.
Result:
4
Press the corresponding " or ❷ buttons, until the cursor is placed
in front of the MENU option.
OPTIONS
DURATA NASTRO
NORMA COLORE
IPC
16:9
Press the corresponding
FUNZIONI option.
3
SV-231X/SV-2315X/SV-2313X)
❿ MENU
Press MENU on the remote control.
Result:
The programming menu is displayed.
5
USCITA: MENU
6
To...
Press ➛ or ❿, until...
Display on-screen information
SI is displayed.
Hide on-screen information
NO is displayed.
On completion, press MENU twice to exit the menu.
Choosing Your Language
REPEAT
TV/VCR
D
EE
SP
2
You can change the language in which information is displayed on
the screen.
MENU
C
RE
1
AU
DI
O
2
2
OK
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding " , ❷ or ➛, ❿ buttons to select the
SELEZIONE LINGUA option.
3
Press the OK button to select this option.
Result:
The SELEZIONE LINGUA menu is displayed.
4
2
LANG
ENGLISH
DEUTSCH
FRANÇAIS
❿ ITALIANO
ESPAÑOL
"
❷!!!!!!➛❿
DUTCH
NORSK
SVENSKA
MAGYAR
POLSKI
MEMORIA: OK
USCITA: MENU
16
Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
INSTALL
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding " , ❷ or ➛, ❿ buttons to select the
INSTALLAZIONE option.
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE menu is displayed.
4
Press the " or ❷ buttons, until the cursor is placed in front of the
CANALE VCR OUT option.
5
Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
SINTONIA AUTOMATICA
SINTONIA MANUALE
STANDARD TV
:G
❿ CANALE VCR OUT
:CH36
SELEZIONE AV2
:DEC
"
❷
6
On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
❿
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
:CH36
SELEZIONE AV2
:DEC
❿ CANALE VCR OUT
"
❷
❿
USCITA: MENU
Selecting the RF OUT Sound Mode (B/G-D/K) ★(SV-635X/
SV-631X/SV-6315X/SV-6313X Only)
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding " , ❷ or ➛, ❿ buttons to select the
INSTALLAZIONE option.
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the STANDARD TV option.
Select the required language by pressing the " or ❷ buttons.
5
Press the ❿ button to select G or K.
5
Press OK to store the language selected.
6
On completion, press MENU twice to exit the menu.
6
Press MENU to exit the menu.
Result:
From now on, all the on-screen information will be
displayed in the language selected.
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
:G
CANALE VCR OUT
:CH36
SELEZIONE AV2
:DEC
❿ STANDARD TV
"
❷
❿
USCITA: MENU
17
Presetting the Stations Automatically
Presetting the Stations Manually
☛
➢
☛
PROG
OPTIONS
INSTALL
INSTALL
CLOCK
BONUS
LANG
INSTALLAZIONE
"
❷!!➛❿!!
OK
USCITA: MENU
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 19)
➢
SELEZIONE NAZIONE
BELGIQUE
ÖSTERREICH
DENMARK
DEUTSCHLAND
ESPAÑA
FINLAND
❿ ITALIA
NETHERLANDS
NORGE
SCHWEIZ
SVERIGE
ALTRI
"
❷
➛❿
Press the MENU button on the remote control.
The programming menu is displayed.
Result:
2
Press the corresponding " ,
INSTALLAZIONE option.
❷! or
➛, ❿ buttons to select the
6
Press the " or ❷ buttons to select a programme number as
required.
❿ SINTONIA MANUALE
STANDARD TV
CANALE VCR OUT
SELEZIONE AV2
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE menu is displayed.
8
4
Press the corresponding " or ❷ buttons, until the cursor is placed
in front of the SINTONIA AUTOMATICA option. And then press
the ❿ button to select this option.
★
With SV-635X, SV-530X, SV-435X and SV-235X, you can select
your country.
a. Press the " or ❷ buttons to select your country.
☛ The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
b. Press OK button.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
Press the ➛ or ❿ buttons to start scanning.
The frequency band is scanned and the first station
Result:
found is displayed.
If you know the number of the channel you want, press the
numeric buttons on the remote control for example, for channel
E21, first press “0” and then press “2”, “1” (see page 46).
ATTENDERE, PREGO...
3%
I--------------------I
USCITA:MENU
6
➢
9
Press the ❷ button to place the cursor in front of the DECODER.
10
Press the ❿ button to activate or deactivate use of the decoder for
the TV station, if necessary.
11
Press the " or ❷ buttons until the cursor is placed in front of the
NOME.
The station name is set automatically from the broadcast signal.
★ (SV-635X/SV-530X/SV-435X/SV-235X only)
12
To change the programme’s name, press the ❿!button.
Result:
The first letter of the name flashes.
13
To...
Then...
Select a character
in the name
Press the " or ❷ button until the
required character is displayed
(letters, numbers or “-” character).
Move to the next or
previous character
Press the ❿ or ➛ buttons
respectively.
14
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
If you...
Then...
Wish to store the
station displayed
◆
◆
◆
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automatically.
In this case, they should be set manually (see page 15).
★(SV-635X/SV-530X/SV-435X/SV-235X Only)
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
LANG
Press the ❿ button to select SINTONIA MANUALE option.
Result:
The INDICE PROGRAMMI menu is displayed.
Press the ❿!button to preset the station.
Result:
The SINTONIA MANUALE menu is displayed.
SINTONIA AUTOMATICA
BONUS
5
7
Press OK to start the auto scanning.
Result:
◆ The ATTENDERE, PREGO... indication flashes
on the television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The VCR then searches for the second station and so on.
◆ When the automatic scanning procedure has
finished, the VCR switches automatically to programme 1.
➢ The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
(country, reception conditions, etc.)
CLOCK
INSTALLAZIONE
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the SINTONIA MANUALE option.
Press the corresponding ", ❷!or ➛, ❿ buttons to select the
INSTALLAZIONE option.
5
INSTALL
INSTALL
4
2
TASTO OK PER CONTINUARE
TASTO MENU PER FINIRE
OPTIONS
Press the OK button to select this option.
The INSTALLAZIONE menu is displayed.
Result:
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
ATTENZIONE: TUTTI I DATI
VERRANNO CANCELLATI
PROG
3
1
CONFERMA:OK
18
To enable the VCR to decode a scrambled TV station, the
decoder must be activated after the scan (see pages 19 or 21).
To enable the VCR to decode a scrambled TV station, the
decoder must be switched on.
1
You can store up to 99 stations.
★(SV-635X/SV-530X/SV-435X/SV-235X)
GB
You do not need to preset the stations manually if you
have already set them automatically.
Do not wish to
store the station
displayed
◆
◆
◆
Press the corresponding " or ❷!buttons
to place the cursor in front of the REG.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station .
Press the corresponding " or ❷ buttons
to place the cursor in front of the CH.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 14
15
Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
16
On completion, press the MENU button three times to exit the menu.
"
❷!!➛❿!!
OK
USCITA: MENU
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
INSTALL
SINTONIA AUTOMATICA
"
❷
❿
:G
:CH36
:DEC
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
INSTALL
SINTONIA AUTOMATICA
❿ SINTONIA MANUALE
CANALE VCR OUT
SELEZIONE AV2
"
❷
❿
:CH36
:DEC
USCITA: MENU
** INDICE PROGRAMMI **
PR CH
NOME DECODER
---NO
2 --- ---NO
3 --- ---NO
4 --- ---NO
5
❿ 1 ---
CAMBIA:❿ SPOSTA:OK
CANC.:CLR/RST
MENU
"
❷
** SINTONIA MANUALE **
PR
❿!!CH
REG.
DECODER
NOME
"
❷
➛❿
:
:
:
:
:
1
--NO
AAAMEMORIA: OK
USCITA: MENU
19
Clearing a Preset Station
Changing the Preset Station Table
GB
If you have stored a TV station:
You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
◆ That you do not require
◆ At the wrong programme position
PROG
OPTIONS
CLOCK
BONUS
INSTALL
INSTALL
"
❷!!➛❿!!
OK
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the SINTONIA MANUALE option.
Press the OK button to select this option.
The INSTALLAZIONE menu is displayed.
Result:
5
Press the ❿ button to select this option.
Result:
The INDICE PROGRAMMI menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the SINTONIA MANUALE option.
6
5
Press the ❿ button to select this option.
Result:
The INDICE PROGRAMMI menu is displayed.
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the required preset TV programme.
Result:
The selected station is displayed at the same time on
the television screen.
7
6
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the required preset TV station. (PR)
7
Press the CLR/RST button.
To change the programme number assigned to a station (PR5
instead of PR1 for example):
◆
Press OK
◆
Press the " or ❷!buttons until the cursor is placed in front of
the programme to which the station is to be moved
◆
Press OK again
2
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
Press the corresponding " ,
INSTALLAZIONE option.
❷! or
➛, ❿ buttons to select the
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
3
INSTALL
"
❷
❿
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
"
❷
❿
❷! or
8
Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
8
Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
9
On completion, press the MENU button three times to exit the
menu.
9
On completion, press the MENU button three times to exit the
menu.
INSTALL
SINTONIA AUTOMATICA
❿ SINTONIA MANUALE
CANALE VCR OUT
:CH36
SELEZIONE AV2
:DEC
➛, ❿ buttons to select the
Press the corresponding " ,
INSTALLAZIONE option.
1
USCITA: MENU
SINTONIA AUTOMATICA
❿ SINTONIA MANUALE
STANDARD TV
:G
CANALE VCR OUT
:CH36
SELEZIONE AV2
:DEC
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2
LANG
INSTALLAZIONE
1
you can cancel it.
** INDICE PROGRAMMI **
PR CH
NOME DECODER
---NO
2 005 ---NO
3 009 ---NO
4 011 ---NO
5 025 ---NO
❿ 1 002
CAMBIA:❿ SPOSTA:OK
CANC.:CLR/RST
MENU
"
❷
** INDICE PROGRAMMI **
PR CH
NOME DECODER
1 002 ---NO
2 005 ---NO
3 009 ---NO
4 011 ---NO
❿ 5(025
---NO )
(SPOSTA:
5 ➛ 5)
"
❷
CONFERMA:OK
MENU
** INDICE PROGRAMMI **
PR CH
NOME DECODER
---NO )
2 005 ---NO
3 009 ---NO
4 011 ---NO
5 025 ---NO
(SPOSTA:
5 ➛ 1)
"
❷
CONFERMA:OK
MENU
❿ 1(025
USCITA: MENU
** INDICE PROGRAMMI **
PR CH
NOME DECODER
---NO
2 002 ---NO
3 005 ---NO
4 009 ---NO
5 011 ---NO
❿ 1 025
** INDICE PROGRAMMI **
PR CH
NOME DECODER
---NO
2 --- ---NO
3 --- ---NO
4 --- ---NO
5 --- ---NO
❿ 1 ---
CAMBIA:❿ SPOSTA:OK
CANC.:CLR/RST
MENU
"
❷
CAMBIA:❿ SPOSTA:OK
CANC.:CLR/RST
MENU
"
❷
20
21
Setting the AV2 Connection
Selecting the Cassette Type
GB
If you wish to use the AV2 socket for a PAY TV DECODER, you
must change AV2 to the required position.
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
STANDARD TV
:G
CANALE VCR OUT
:CH36
❿ SELEZIONE AV2
:DEC
"
❷
❿
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding " ,
INSTALLAZIONE option.
❷! or
➛, ❿ buttons to select the
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the SELEZIONE AV2 option.
5
When...
Press ➛ or ❿, until...
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
FUNZIONI option.
INSTALL
SINTONIA AUTOMATICA
SINTONIA MANUALE
CANALE VCR OUT
:CH36
❿ SELEZIONE AV2
:DEC
The decoder is connected to
the AV2(DECODER/EXT.) socket
6
"
❷
❿
➛, ❿ buttons to select the
Press the OK button to select this option.
4
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the DURATA NASTRO option.
5
Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180
E 300
EXT is displayed.
TV/VCR
D
EE
SP
:SI
NORMA COLORE
IPC
16:9
NICAM
"
❷
❿
USCITA: MENU
SV-231X/SV-2315X/SV-2313X)
Press MENU twice to exit the menu.
MENU
:SI
❿ DURATA NASTRO :E180
NORMA COLORE
IPC
16:9
:AUTO
:SI
:AUTO
On completion, press MENU twice to exit the menu.
"
❷
The TV/VCR button allows you to record one channel with the VCR
while you watch another channel on the TV.
When the VCR indicator is...
Your television...
On
The television receives the picture from
the VCR and you can select channels
with the PROG/TRK (" or ❷) / PROG
(" or ❷) buttons on the VCR or the
remote control.
OK
Off (or the VCR is turned off)
The television receives the picture from
your home aerial or cable television
system as it did before you connected
the VCR.
You can then use the programme (" or
❷) buttons on your television to select
the channels.
❿
USCITA: MENU
Selecting the Recording Speed ★(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X Only)
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SP is displayed.
LP is displayed.
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
UD
IO
C
RE
TV/VCR
D
EE
SP
OK
To switch the VCR indicator on and off, simply press the TV/VCR button.
22
:AUTO
:SI
:AUTO
:SI
★(SV-530X/SV-435X/SV-431X/SV-235X/
DEC is displayed.
AU
DI
O
C
RE
MENU
E240
E260
USCITA: MENU
MENU
OPTIONS
❿ DURATA NASTRO :E180
OPTIONS
6
Switching between the TV and VCR Modes
REPEAT
" , ❷! or
3
SV-231X/SV-2315X/SV-2313X)
Another VCR or Satellite
receiver is connected to
the AV2(DECODER/EXT.) socket
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
1
23
NICAM ★(SV-635X/SV-631X/SV-6315X/SV-613X Only)
Protecting a Recorded Cassette
GB
OPTIONS
MENU
DURATA NASTRO
NORMA COLORE
IPC
16:9
❿ NICAM
"
❷
❿
:SI
:E180
:AUTO
:SI
:AUTO
:SI
USCITA: MENU
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 34.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
Press the corresponding
FUNZIONI option.
3
Press the OK button to select this option.
Result:
The FUNZIONI menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is
placed in front of the NICAM option.
5
To...
Press ➛ or ❿, until...
Mono mode
NO is displayed.
NO: Only set at this position to record the
standard mono sound during a NICAM
broadcast if the stereo sound is
distorted due to inferior reception
conditions.
NICAM mode
6
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
SI is displayed.
SI: Normally set at this position.
Recording a Programme Immediately
Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 18 and 19.
1
★(SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
★(SV-635X)
DISP./
DISPLAY
Switch on the television.
4
2
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The VCR is switched on automatically.
VOL
On completion, press MENU twice to exit the menu.
4
Select:
◆
The station to be recorded using the PROG/TRK (" or ❷) /
PROG (" or ❷) buttons
or
◆
The AV1, AV2 or AUX ★(SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/SV-235X only) source using
the INPUT button for a satellite tuner or external video source
Result:
The station number is displayed and the programme
can be seen on the television.
★
With SV-635X/SV-631X/SV-6315X-SV-6313X/SV-530X/SV-435X/
SV-431X, you can select the recording speed (SP/LP). Press the
SPEED button.
5
Hold REC (●) down for a while to start recording.
Result:
The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 36).
6
To stop recording, press ■ once.
➢
24
1
➛, ❿ buttons to select the
2
" , ❷! or
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
U
4
PROG/TRK
TRK
PROG
U
4
AU
DI
O
AU
DI
O
MENU
AU
DI
O
C
RE
5
TV/VCR
D
EE
SP
★
OK
OK
6
◆ If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
25
4
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours of
programmes. (LP)
Your VCR stops automatically after the requested length of time.
3
DISP./
DISPLAY
4
U
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used)
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG/TRK (" or ❷) /
PROG (" or ❷) buttons
or
◆
The AV1, AV2 or AUX ★(SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/SV-235X only) source using
the INPUT button for a satellite tuner or external video source
The channel number is displayed and the programme
Result:
can be seen on the television.
★
With SV-635X/SV-631X/SV-6315X-SV-6313X/SV-530X/SV-435X/
SV-431X, you can select the recording speed (SP/LP). Press the
SPEED button.
5
Hold the REC button (●) down for a while to start recording.
The record indicator appears on the television screen
Result:
and VCR display. An index is recorded on the tape
(see page 36).
6
Press the REC button (●) several times to increase the recording
time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
The length is displayed on the television displays. The
Result:
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
7
If you wish to cancel the recording before the end, press
VCR STANDBY/ON (STANDBY/ON).
★(SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
★(SV-635X)
VOL
1
4
PROG/TRK
TRK
PROG
U
4
AU
DI
O
AU
DI
O
REPEAT
4
MENU
AU
DI
O
C
RE
5
TV/VCR
D
EE
SP
★
DURATA 0:00
IMPOSTA DURATA:
TASTO REC
☛
26
If the end of the tape is reached while recording:
◆ The recording stops
◆ The VCR automatically turns off
Using the ShowView Feature
★(SV-635X/SV-530X/SV-435X/SV-235X Only)
GB
Before presetting your VCR:
◆ Switch on both the television and your VCR
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
DI
O
RE
TV/VCR
D
EE
SP
1
Up to six programmes can be preset.
1
Press the SHOWVIEW button.
A message is displayed to allow you to enter the
Result:
ShowView code.
☛
OK
If all six programmes have been set, the message IL
SHOWVIEW
TIMER E’ COMPLETO: CANCELLARE UNA
PROGRAMMAZIONE PER INSERIRNE UNA NUOVA is
displayed. Refer to page 30 if you wish to cancel a preset
recording.
2
Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine.
➢
3
If you wish to correct the ShowView code that you are
entering:
◆ Press the ➛ button until the digit to be corrected is
cleared
◆ Enter the correct digit
Press the MENU or Showview button.
The information concerning the programme is displayed.
Result:
☛
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the # or ❷ buttons. Refer to the following page if:
◆ The programme number or times flash
◆ You wish to modify the programme
4
If the programme and times are correct, press the MENU button.
5
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
6
Refer to page 30 if you wish to:
◆ Check that your VCR has been programmed correctly
◆ Cancel a preset recording
☛
CODICE ---------
CODICE:0-9
★(SV-635X/SV-435X/SV-530X)
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
V/P
PROG
❿ 1 SA11 20:30→21:00SP ON
-----#
❷
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is
manufactured under licence from Gemstar Development Corporation.
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:----
-
➛❿
ANNULLA:CLR/RST
MENU
★(SV-235X)
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
V/P
ON
-- ---- --:--→--:--- ---- --:--→--:--- ---- --:--→--:--- ---- --:--→--:--- ---- --:--→--:--
PROG
❿ 1 SA11 20:30→21:00
#
❷
The numbers next to each TV programme listing are
ShowView code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the ShowView code for the programme
you wish to record.
CAMBIA:➛
USCITA:MENU
➛❿
ANNULLA:CLR/RST
★(SV-635X)
MENU
★(SV-530X/SV-435X/SV-235X)
STANDBY/ON
VCR STANDBY/ON
5 SLO
5 SLO
SHUT
SHUT
27
Modifying ShowView Programming
★(SV-635X/SV-530X/SV-435X/SV-235X Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
Using the Quick Programming Feature
1
If you wish to...
Select an input source other
than the tuner AV1, AV2 or AUX
◆ Press the ➛ or ❿ buttons, until the PR selection flashes.
◆ Press the INPUT button one or more times to change the
input source selection.
The programme number is replaced by:
Result:
• A1, A2 or AU for a satellite tuner or external
video input (used by another VCR for example)
Record a programme every day
(Monday to Sunday) at the same time
The input source must be selected before changing any
other value.
◆ Press the # or ❷ buttons, until the DLY (Daily) value is
◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
◆ Press the # or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time
◆ Press the ➛ or ❿ buttons, until the STOP selection flashes.
◆ Press the # or ❷ buttons to increase or decrease the stop
time.
Select PDC recording
◆ Press the ➛ or ❿ buttons, until the V/P selection flashes.
◆ Press the # or ❷ buttons until the ON or “-” indication is
displayed.
☛ Do not select PDC unless you are sure the programme
you wish to record is broadcast with PDC. If you do set
PDC ON (by selecting “ON” in the right - hand column
on the screen), then you must set up the start-time
EXACTLY according to the published TV schedule.
Otherwise the timer recording won’t take place.
Select the recording speed
★(SV-635X/SV-530X/SV-435X only)
flashes.
displayed:
• AUTO (Auto Tape Speed Select) : see page 29
• SP (Standard Play)
• LP (Long Play)
Press MENU on the remote control.
Result: The programming menu
is displayed.
Press the OK button to select this option.
Result: The PROGRAMMAZIONE
TIMER menu is displayed.
Insert the cassette and press the
Q-PRO button.
2
Press ❿ to select the input source.
3
Select the required station by pressing the # , ❷ buttons or
INPUT to select the AV1, AV2 or AUX ★(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X only) input sources.
Press ❿ to select the recording day.
4
5
6
7
8
9
10
11
★
★
◆ Press the ➛ or ❿ buttons, until the recording speed selection
◆ Press the # or ❷ buttons until the correct indication is
28
★SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/
SV-235X/SV-231X/SV-2315X/
SV-2313X
◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
displayed.
Record a programme every week
on the same day and at the same time
SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/
SV-431X/SV-235X/SV-231X/
SV-2315X/SV-2313X
Then...
➢
GB
The Quick Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
12
13
Select the required day by pressing the # or ❷ buttons.
PROG
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
PROGRAMMAZIONE TIMER
#
❷!!➛❿!!
OK
USCITA: MENU
★(SV-635X/SV-530X/SV-435X)
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
V/P
PROG
❿ 1 SA11 20:30→21:00SP ON
-----#
❷
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:----
-
➛❿
ANNULLA:CLR/RST
MENU
Press ❿ to select the recording start time.
Select the required hour value by pressing the # or ❷ buttons.
★(SV-631X/SV-6315X/SV-6313X/SV-431X)
Press ❿ to select the minutes.
Select the required minute value by pressing the # or ❷ buttons.
Press ❿ to select the recording end time.
Select the required recording end time by pressing the # or ❷!
buttons, following the same procedure as when selecting the
recording start time.
With SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X/SV-435X/
SV-431X, you can select the recording speed (AUTO/SP/ LP).
a.Press ❿ to select the recording speed.
b. Press the # or ❷ buttons to switch between the AUTO,
SP (Standard Play) or LP (Long Play) recording speeds..
With SV-635X/SV-530X/SV-435X/SV-235X, you can select the VPS
or PDC recording mode.
a. Press ❿ to select the VPS or PDC(V/P) recording mode.
b.Press the # or ❷ buttons to toggle between the VPS or PDC
mode (marked ON) and the non-VPS/PDC mode (marked -).
When you have finished, press the MENU button.
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
Before starting recording, the VCR compares the timer
Result:
duration with the remaining time on the cassette.
☛
Auto Tape Speed Select ★(SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/SV-431X Only)
The VCR’s “Auto Tape Speed Select” function compares
the duration of the timer recording to the actual recording
time remaining on the tape loaded. If there is insufficient
tape to complete a timer recording in AUTO mode, the
VCR automatically switches to LP mode to record the
whole programme.
E.g.
If there is a one hour Timer Recording in AUTO
mode to be started, and only 40 minutes tape
remaining, the VCR will record in SP for 20
minutes and switch to complete the remaining 40
minutes in LP mode.
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
PROG
❿ 1 SA11 20:30→21:00SP
-----#
❷
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:---➛❿
ANNULLA:CLR/RST
MENU
★(SV-235X)
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
V/P
ON
-- ---- --:--→--:--- ---- --:--→--:--- ---- --:--→--:--- ---- --:--→--:--- ---- --:--→--:--
PROG
❿ 1 SA11 20:30→21:00
#
❷
➛❿
ANNULLA:CLR/RST
MENU
★(SV-231X/SV-2315X/SV-2313X)
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
PROG
❿ 1 SA11 20:30→21:00
-----#
❷
---- --:--→--:----- --:--→--:----- --:--→--:----- --:--→--:----- --:--→--:-➛❿
ANNULLA:CLR/RST
29
MENU
Checking a Preset Recording
Playing a Cassette
GB
You can check your preset recordings:
This function allows you to play back any pre-recorded cassette.
SP
◆ When you have finished presetting the VCR
PROG
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
◆ If you have forgotten which programmes will be
recorded
1
Switch on both the television and your VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿II.
Otherwise, the cassette is played automatically.
PROGRAMMAZIONE TIMER
1
#
❷!!➛❿!!
OK
USCITA: MENU
SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/
SV-431X/SV-235X/SV-231X/
SV-2315X/SV-2313X
★(SV-635X/SV-530X/SV-435X)
★SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/
SV-235X/SV-231X/SV-2315X/
SV-2313X
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
V/P
PROG
❿ 1 SA11 20:30→21:00SP ON
-----#
❷
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:----
-
➛❿
ANNULLA:CLR/RST
MENU
★(SV-631X/SV-6315X/SV-6313X/SV-431X)
Press MENU on the remote control.
Result: The programming menu
is displayed.
Press the OK button to select this option.
Result: The PROGRAMMAZIONE
TIMER menu is displayed.
➢
3
Press Q-PRO on the remote control.
2
Press the # or ❷ buttons to select the required programme.
3
Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
4
On completion, press MENU twice.
OK
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
To...
Then press...
Stop the playback
■ (STOP).
Eject the cassette
➢
2
3
(EJECT).
One Touch Play.
For your convenience, you can playback tape with a
simple touch of the ❿II (PLAY) button. One Touch Play
can be used even when the power is off but a cassette is
inserted.
1/GEN SAB
12:01
PR GG. INIZIO→→ FINE
PROG
❿ 1 SA11 20:30→21:00SP
-----#
❷
---- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:------- --:--→--:----
Cancelling a Preset Recording
Adjusting Picture Alignment Manually
➛❿
ANNULLA:CLR/RST
MENU
You can cancel any programmes that are:
The Picture Alignment feature allows you to adjust the alignment
manually to obtain the best possible picture.
◆ Incorrect
★(SV-235X)
◆ No longer required
PROG
PR
❿ 1
-----#
❷
1/GEN SAB
12:01
GG. INIZIO→→ FINE
V/P
SA11 20:30→21:00
ON
---- --:--→--:----- --:--→--:----- --:--→--:----- --:--→--:----- --:--→--:--
1
➛❿
ANNULLA:CLR/RST
MENU
★SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/
SV-235X/SV-231X/SV-2315X/
SV-2313X
★(SV-231X/SV-2315X/SV-2313X)
PROG
PR
❿ 1
-----#
❷
SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/
SV-431X/SV-235X/SV-231X/
SV-2315X/SV-2313X
1/GEN SAB
12:01
GG. INIZIO→→ FINE
SA11 20:30→21:00
---- --:--→--:----- --:--→--:----- --:--→--:----- --:--→--:----- --:--→--:-➛❿
ANNULLA:CLR/RST
30
Press MENU on the remote control.
Result: The programming menu
is displayed.
Press the OK button to select this option.
Result: The PROGRAMMAZIONE
TIMER menu is displayed.
★(SV-635X)
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK (# or ❷) / TRK ( or ) buttons
until the picture is clear and stable.
Result:
◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
★(SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
DISPLA
DISP./
ADV
OL
PROG/TRK
TRK
DEX
MENU
AU
DI
AU
DI
O
Press Q-PRO on the remote control.
TV
2
Select the programme to be cancelled by pressing the
buttons.
3
Press the CLR/RST button to cancel the selected programme.
All the recording information is deleted and the broadResult:
cast will not be recorded.
4
On completion, press MENU twice.
#
or
PROG
❷
MENU
31
Intelligent Picture Control
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
OPTIONS
MENU
DURATA NASTRO
NORMA COLORE
❿ IPC
16:9
NICAM
❿
#
❷
:SI
:E180
:AUTO
:SI
:AUTO
:SI
FORMAT 16:9 (WIDE SCREEN)
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
The programming menu is displayed.
Result:
2
Press the corresponding
FUNZIONI option.
3
4
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
FUNZIONI option.
Press the OK button to select this option.
Result:
The FUNZIONI menu is displayed.
3
Press the OK button to select this option.
Result:
The FUNZIONI menu is displayed.
Press the corresponding # or
placed in front of the IPC option.
4
Press the corresponding # or ❷ buttons, until the cursor is
placed in front of the 16:9 option.
5
Press the ❿ button to select AUTO ➝ SI ➝ NO.
# , ❷! or
❷
➛, ❿ buttons to select the
buttons, until the cursor is
SV-231X/SV-2315X/SV-2313X)
5
MENU
DURATA NASTRO
NORMA COLORE
❿ IPC
16:9
❿
#
❷
:SI
:E180
:AUTO
:SI
:AUTO
USCITA: MENU
Press the ❿ button to select the IPC (intelligent picture control)
option.
➢
OPTIONS
To adjust the sharpness manually, press the ❷ button to turn the
IPC mode NO.
7
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
IPC
:
8
If you do not press a button within ten seconds, the
IMMAGINE menu disappears automatically.
On completion, press the MENU button again.
SI/NO:❷
SLOW
Q-PRO
SHUTTLE
IPC
V-LOCK
DISPLAY
1
1
During playback, press the IPC button on the remote control.
2
Press the ❷ button to turn the IPC (intelligent picture control)
option SI and NO.
➢
3
** IMMAGINE **
:
NO
SOFT
NITIDA
---------*-----➛❿
4
SI/NO:❷
When intelligent picture control mode is SI, the sharpness
of the image is adjusted automatically.
To adjust the sharpness manually, select intelligent picture control
mode NO.
◆ The horizontal picture adjusting appears.
➢
MENU
DURATA NASTRO
NORMA COLORE
IPC
❿ 16:9
NICAM
#
❷
❿
:SI
:E180
:AUTO
:SI
:AUTO
:SI
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
OPTIONS
MENU
DURATA NASTRO
NORMA COLORE
IPC
❿ 16:9
#
❷
❿
:SI
:E180
:AUTO
:SI
:AUTO
USCITA: MENU
On completion, press MENU twice to exit the menu.
If you do not press a button within ten seconds, the
IMMAGINE menu disappears automatically.
◆
◆
When playing back a cassette, the standard is
automatically selected by the VCR.
When you playback an NTSC-recorded tape on this VCR
make a setting on the colour system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding #, ❷!or ➛, ❿ buttons to select the
FUNZIONI option.
3
Press the OK button to select this option.
Result:
The FUNZIONI menu is displayed.
4
Press the corresponding # or ❷ buttons, until the cursor is
placed in front of the NORMA COLORE option.
5
Press the ❿ button to select AUTO ➝ PAL ➝ MESECAM ➝ B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the VCR.
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
5
32
OPTIONS
Selecting the Colour Mode
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically according to your own
preferences.
F.ADV
IPC
6
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
Intelligent Picture Control ★(SV-631X/SV-6315X/SV-6313X/SV-530X/
SV-435X/SV-431X/SV-235X/SV-231X/SV-2315X/SV-2313X Only)
CLR/RST
➛, ❿ buttons to select the
GB
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
NO
SOFT
NITIDA
---------*-----➛❿
# , ❷! or
AUTO Set when you use a wide TV. The VCR detects wide TV
programmes and normal TV programmes automatically
when playing back and recording.
SI
The VCR always plays back and records in the mode
compatible with 16:9 wide screen. Set if the VCR cannot
detect wide TV programmes with “AUTO” set.
NO
Set if you do not use a wide TV.
When intelligent picture control mode is SI, the sharpness
of the image is adjusted automatically.
6
➢
** IMMAGINE **
Your VCR can automatically read a 16:9 signal from the AV2 input
or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through
a 21 pin scart cable.
B/W
6
★(SV-635X/SV-631X/SV-6315X/SV-6313X)
OPTIONS
MENU
:SI
DURATA NASTRO :E180
:AUTO
IPC
:SI
16:9
:AUTO
NICAM
:SI
❿ NORMA COLORE
#
❷
❿
USCITA: MENU
★(SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/SV-2315X/SV-2313X)
OPTIONS
MENU
:SI
DURATA NASTRO :E180
:AUTO
IPC
:SI
16:9
:AUTO
❿ NORMA COLORE
#
❷
❿
USCITA: MENU
Black and White
On completion, press MENU twice to exit the menu.
On completion, press the IPC button again.
33
Selecting the Audio Output Mode ★(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X Only)
Playing a Cassette in Slow Motion
GB
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
PEAT
MENU
AU
DI
O
C
RE
TV/VCR
D
EE
SP
L
R
LR
MIX
Option
You can play a cassette in slow motion.
➢
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO
Used to listen to the sound on the normal mono channel.
LR
Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
No sound is heard when playing back a cassette in slow
motion.
SLOW
1
Press:
◆
❿II to start playing the cassette
◆
SLOW (
) as many times as required to decrease or
increase the speed respectively
To return to the normal speed, press the ❿II button twice.
◆
2
When playing back in slow motion, picture interference may occur.
Press the PROG/TRK (# or ❷) / TRK ( or
) buttons to
minimize this effect.
☛
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
MONO
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
➢
SHUTTLE
SLOW
1
V-LOCK
Vertical stability: When playing back slow motion,
interference may be seen on the screen. Press the
V-LOCK
V-LOCK (
) buttons to minimize this effect.
★(SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
★(SV-635X)
DISPLA
DISP./
When you have been using the Slow Motion function for
more than about five minutes, the VCR will automatically
play to protect the:
◆ Cassette
◆ Video heads
1
ADV
OL
PROG/TRK
AU
DI
TV
Playing a Sequence Frame by Frame
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
You can select the mode in which the sound is mute.
REPEAT
➢
MENU
AU
DI
O
C
RE
TV/VCR
D
EE
SP
To select the audio mute mode on and off, simply press the AUDIO button
on the remote control.
Press:
◆
❿II to start playing the cassette
❿II to stop the tape at a given frame
◆
F.ADV (
2
F.ADV
) to advance frame by frame
To return to normal playback, press ❿II.
☛
X
➢
34
1
OK
1
◆
OK
No sound is heard when playing back frame by frame.
PROG
MENU
AU
DI
O
Selecting the Audio Mute Mode ★(SV-435X/SV-431X/
SV-235X/SV-231X/SV-2315X/SV-2313X Only)
TRK
DEX
When you have been using the Frame-by-Frame function
for more than about five minutes, the VCR will automatically play to protect the cassette and video heads.
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
V-LOCK
V-LOCK (
) buttons to minimize this effect.
35
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
SLOW
SHUTTLE
➢
D
1
1
1
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
2
3
Press:
◆
◆
◆
/ S
No sound is heard when playing a sequence at variable
speeds.
❿II during playback
SHUTTLE (
SHUTTLE (
) to play the cassette backwards
) to play the cassette forwards
GB
You can set repeat play to repeat the tape continuously from
beginning to end.
The Shuttle function is available on the Remote control
V-LOCK
C
Auto Repeat Play
or ➛, ❿ buttons to select the
INSTALLAZIONE RAPIDA option.
",❷
Press the OK button to select this option.
Result:
The INSTALLAZIONE RAPIDA menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is placed
in front of the RIPETIZIONE PLAY option.
5
To...
PROG
OPTIONS
INSTALL
CLOCK
BONUS
BONUS
LANG
INSTALLAZIONE RAPIDA
"
❷!!➛❿!!
OK
USCITA: MENU
SHUTTLE
Each time you press a SHUTTLE (
) button, the speed is
changed as shown in the following illustration.
REVERSE REVERSE REVERSE
PLAY
PLAY
PLAY
X9
X7
X3
STILL
SLOW
MOTION
X1/10
SLOW
MOTION
X1/5
BONUS
AUTO-SPEGNIMENTO :NO
❿ RIPETIZIONE PLAY :NO
PLAY
X3
PLAY
Press ➛ or ❿, until...
PLAY
X7
PLAY
X9
6
Repeat play
SI is displayed.
Do not wish to repeat play
NO is displayed.
On completion, press MENU twice to exit the menu.
RIPETIZ.PARZIALE : 5
"
❷
❿
USCITA: MENU
Searching for a Specific Sequence
CLR/RST
INDEX
Seq. being
Prev
REPEAT
C
RE
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➞
INPUT
F.ADV
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
MEN
etc.
1
➢
played
Seq.
2
Next
1
etc.
Seq.
1
2
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Interval Repeat Play
You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
or ➛, ❿ buttons to select the
INSTALLAZIONE RAPIDA option.
PROG
OPTIONS
INSTALL
CLOCK
BONUS
BONUS
LANG
",❷
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE RAPIDA menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is placed
in front of the RIPETIZ.PARZIALE option.
5
To...
Press ❿, until...
Interval repeat play
5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
INSTALLAZIONE RAPIDA
"
❷!!➛❿!!
OK
USCITA: MENU
INDEX : -➛➛!!!!❿❿
1
To search for a specific index, press INDEX.
2
Press the ➛➛ or ❿❿ buttons depending on the direction where your
desired programme is located. Each time you press the ➛➛ or ❿❿
buttons, the number decreases or increases respectively.
Result:
The index number is displayed.
BONUS
3
INDEX : - 6
➛➛!!
36
The VCR starts to search for the point you specified with the ➛➛ or
❿❿ buttons.
Result:
When the index is found, cassette playback starts.
➢
You can set an index number up to ±20.
Cancel interval repeat play
AUTO-SPEGNIMENTO :NO
RIPETIZIONE PLAY :NO
❿ RIPETIZ.PARZIALE : 5
NO is displayed.
6
On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
“IMPOSTA INTERVALLO DA RIPETERE” is displayed.
Result:
Press the INPUT/REPEAT button one more time at the desired
end point.
The tape is automatically rewound to the start point.
Result:
“INTERVALLO DA RIPETERE” is displayed.
"
❷
❿
USCITA: MENU
37
Connecting an RCA Audio/Video Input Cable ★(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X Only)
Using the Tape Counter
GB
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the VCR
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
0:00:00
★(SV-631X/SV-6315X/SV-6313X/
SV-530X/SV-435X/SV-431X/SV-235X/
SV-231X/ SV-2315X/SV-2313X)
★(SV-635X)
VCR
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press DISP./
or DISPLAY twice to display the counter
◆ Press CLR/RST when you want to set the tape counter to
zero
3
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press ➛➛ or ❿❿.
IPC
DISP./
DISPLAY
Result:
2
VOL
2
PROG/TRK
TRK
CLR/RST
PROG
F.ADV
2
INPUT
REPEAT
38
INDEX
MEN
➢
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
Examples: ◆ You wish to copy a video cassette with the help of a
second VCR (see page 40).
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 40).
☛
Press DISP./ or DISPLAY:
◆ Once to display the current function, programme
number, recording speed ★(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-431X only),
date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
VIDEO
Connect one end of the RCA audio/video cable into the VIDEO
socket on the front of the VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable into the AUDIO sockets
on the front of the VCR.
L AUDIO R
AUX
◆ Make sure that both the television and the VCR are
switched off before connecting the cables.
1
1
VIDEO
L AUDIO R
AUX
The VCR stops automatically when the counter
reaches zero.
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
★(SV-635X/SV-631X/SV-6315X/SV-6313X/SV-530X)
➢
4
3
3
Take care to respect the colour coding of the left and right
channels.
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
★(SV-435X/SV-235X)
STANDBY/ON
EJECT
VIDEO
AUDIO
AUX
3
1
39
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
SP
2
1
Insert the cassette to be edited in your VCR.
2
Press the ❿ll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the❿ll button.
OK
4
5
6
F.ADV
Press the F.ADV (
) button again as often as necessary to
advance frame by frame, until the exact recording position is
located.
While the VCR is in still mode, hold the REC button (●) down for
a while to activate the Assemble Edit function.
Result:
Record symbol flashes in the display.
Select the source from which you wish to record by pressing:
◆ The PROG/TRK (" or ❷) / PROG (" or ❷) buttons for
television channels
◆
The INPUT button for the AV1, AV2 or AUX ★(SV-635X/
SV-631X/SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X only)
input sources
7
Press the ❿ll button to start recording.
8
When you have finished recording, press ■ .
Recording from Another VCR or Camcorder
You can copy a cassette to your VCR from another video source,
such as another VCR or a camcorder.
☛
1
AU
DI
O
C
RE
D
EE
SP
6
TV/VCR
Connect the VCR, from which the cassette is to be copied, to the
appropriate SCART audio and video input connectors on the rear
of your VCR, as indicated on page 12.
You can also use an RCA audio and video cable to connect the
AUX input on the front of your VCR. ★(SV-635X/SV-631X/
SV-6315X/SV-6313X/SV-530X/SV-435X/SV-235X only)
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT button to select the appropriate input on your
VCR:
◆ AV1 or AV2 for the SCART input
◆ AUX for the RCA input ★(SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X/SV-435X/SV-235X only)
OK
7
5
Start playing back the cassette to be copied.
6
Hold REC (●) down for a while to start recording on your VCR.
7
When you have finished recording, press ■ on both VCRs.
➢
40
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
If you wish to view the cassette being copied:
◆ Your VCR must be connected as usual to the
television (see page 10 for further details)
Audio Dubbing a Pre-recorded Cassette ★(SV-635X Only)
GB
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
4
◆ A CD player
5
VIDEO EDIT
◆ A microphone connected to a sound system
◆ A cassette player
6
10
Restriction:
A.DUB
A.DUB
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (CD/cassette player for example).
2
STANDBY/ON
EJECT
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the front of your VCR.
VIDEO
L AUDIO R
AUX
3
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the ❿ll to start playback.
4
Search for the Audio Dubbing (ending) point using the SHUTTLE,
and set the counter to 0:00:00 by pressing CLR/RST.
5
Search back slightly beyond the Audio Dub start point using the
Shuttle.
6
Press the ❿ll button.
7
Press DUB.
Result:
Your VCR is now in the Audio dubbing Pause
mode.
2
CLR/RST
2
F.ADV
-/--
4
INPUT
REPEAT
8
On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
Example: The track that you wish to record on the cassette.
9
When you are ready:
◆
Start playback on the sound system
◆
Press REC (●) on the remote control.
The soundtrack is replaced on the pre-recorded cassette.
Result:
10
The audio dubbing will finish when the counter reaches 0:00:00.
The VCR Aux input will remain selected. Use the input select or up
/ down programme keys as required.
➢
VOL
INDEX
PROG/TRK
MENU
C
RE
AU
DI
O
7
DUB
TV/VCR
D
EE
SP
DUB
-0:05:23
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 34).
41
Using the TV Buttons on the Remote Control ★(SV-635X Only)
Auto Power Off
GB
Your VCR remote control will work with Samsung televisions and
compatible brands.
VCR STANDBY/ON
TV STANDBY/ON
To determine whether your television is compatible, follow the instructions
below.
1
SLOW
SHUTTLE
2
TV
2
VCR
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
CLR/RST
2
5
F.ADV
-/-INPUT
VOL
INDEX
PROG/TRK
4
REPEAT
5
MENU
AU
DI
O
C
RE
Codes
Brand
Codes
SAMSUNG
AKAI
GRUNDIG
LOEWE
PANASONIC
01 to 06
09, 23
09, 17, 21
02
08, 23 to 27
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
DISP./
➢
CLR/RST
F.ADV
PROG
OPTIONS
INSTALL
CLOCK
BONUS
BONUS
LANG
Press the corresponding
",❷
or ➛, ❿ buttons to select the
3
Press the OK button to select this option.
Result:
The INSTALLAZIONE RAPIDA menu is displayed.
4
Press the corresponding " or ❷ buttons, until the cursor is placed
in front of the AUTO-SPEGNIMENTO option.
5
Press the ❿ button, until you select the time of Auto Power off
interval.
NO
2HORA
"
❷!!➛❿!!
OK
BONUS
❿ AUTO-SPEGNIMENTO :NO
RIPETIZIONE PLAY :NO
RIPETIZ.PARZIALE : 5
3HORA
"
❷
6
USCITA: MENU
❿
USCITA: MENU
On completion, press MENU twice to exit the menu.
If your television is compatible with the remote control, it
is switched off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
6
Press MENU on the remote control.
Result:
The programming menu is displayed.
INSTALLAZIONE RAPIDA option.
Brand
Result:
TV/
B
V-LOCK
1
INSTALLAZIONE RAPIDA
DISP./
3
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
Child door Lock System ★(SV-635X/SV-530X/SV-435X/SV-235X Only)
-/-INPUT
REPEAT
VOL
INDEX
MENU
☛
PROG/TRK
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
6
AU
DI
O
C
RE
You can then control the television using the following buttons.
Button
SHUTTLE
VCR
With this mechanism you can prevent children from harming
themselves or the VCR. It stops fingers and small articles from
entering your VCR.
★(SV-635X)
Function
TV STANDBY/ON ➀ Used to switch the television on and off.
STANDBY/ON
EJECT
REW
VIDEO
PLAY
F.F
L AUDIO R
PROG
REC
STOP
AUX
V-LOCK
CLR/RST
DISP./
F.ADV
-/-INPUT
TV or VCR ➁
7
INDEX
VOL
PROG/TRK
-/--
➂
INPUT
Used to switch between the TV and VCR modes.
Only the VOL (+ or – ) and TV STANDBY/ON
buttons are operational in VCR mode.
★(SV-530X)
Used to enter a two-figure programme number.
Example: For programme 12, press -/-- followed
by numeric buttons 1 and 2.
➃
Used to select an external source.
STANDBY/ON
EJECT
REW
PROG
VIDEO
REC
PLAY
STOP
L AUDIO R
AUX
VOL + or –
➄
Used to adjust the volume of the television.
PROG/TRK
(" or ❷)
➅
Used to select the required programme.
DISP./
➢
42
➆
★(SV-435X/SV-235X)
Used to switch between an external source and
the television tuner.
STANDBY/ON
EJECT
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
REW
VIDEO
AUDIO
PROG
REC
AUX
43
STOP
PLAY
F.F
F.F
Technical Specifications
Problems and Solutions
GB
Before contacting the Samsung after-sales service, perform the following simple checks.
Design and specifications are subject to change without notice.
Problem
MODEL
Format
Heads
SV-635X/SV-631X/SV-6315X/
SV-6313X/SV-530X
VHS PAL standard
Video: 4 rotary heads
No power
◆
◆
Check that the power plug is connected to a wall outlet.
Have you pressed the VCR STANDBY/ON (STANDBY/ON)
button?
VHS PAL standard
Video: 4 rotary heads (SV-435X/SV-431X)
Video: 2 rotary heads
(SV-235X/SV-231X/SV-2315X/SV-2313X)
You cannot insert a video cassette
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded
◆
◆
◆
Check the VCR aerial connections.
Is the VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆
Was the VCR STANDBY/ON (STANDBY/ON) button pressed
to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
REW time
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head
Erase: 1 full track erase head
VHF-I, VHF-III, UHF, Interband/
Hyperband
STANDARD B/G
FM azimuth recording
PAL/MESECAM/NT4.43: Down
converted subcarrier phase shifted
direct recording
NTSC PB on PAL TV
SP 23.39 mm/sec
LP 11.69 mm/sec
SP 3 hours (E-180 Tape)
LP 6 hours (E-180 Tape)
About 60 sec in REW with E-180
Audio/Control: 1 stationary head
Erase: 1 full track erase head
VHF-I, VHF-III, UHF, Interband/
Hyperband
STANDARD B/G
FM azimuth recording
PAL/MESECAM/NT4.43: Down
converted subcarrier phase shifted
direct recording
NTSC PB on PAL TV
SP 23.39 mm/sec
LP 11.69 mm/sec (SV-435X/SV-431X)
SP 3 hours (E-180 Tape)
LP 6 hours (E-180 Tape) (SV-435X/SV-431X)
About 100 sec in REW with E-180
VIDEO
Input
Output
Signal-to-noise ratio
Horizontal resolution
0.5 to 2.0 Vp-p; 75 ohm unbalanced
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Better than 43 dB (SP)
More than 240 lines
0.5 to 2.0 Vp-p; 75 ohm unbalanced
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Better than 43 dB(SP)
More than 240 lines
AUDIO
Input
Output
Wow and flutter (WTD)
Signal-to-noise ratio
Frequency response
-8 dBm, 47 Kohm unbalanced
-8 ± 3 dBm, 1 Kohm unbalanced
0.4% max (SP)
68 dB min (IHF A filter)
20Hz - 20kHz
-8 dBm, 47 Kohm unbalanced
-8 ± 3 dBm, 1 Kohm unbalanced
0.4% max (SP)
42 dB min (IHF A filter)
Power requirement
Power consumption
Operation temperature
Operation humidity
Weight
Dimensions (WxHxD)
230V (AC 50-60 Hz)
Approx. 17 watts
41°F-104°F (5°C-40°C)
10%-75%
3.3 Kg (net)
360 x 94 x 285 mm
230V (AC 50-60 Hz)
Approx. 15 watts
41°F-104°F (5°C-40°C)
10%-75%
3.3 Kg (net)
360 x 94 x 285 mm
Receiving channel
Television system
Luminance
Colour system
Tape speed
Recording/playback time
Explanation/Solution
SV-435X/SV-431X/SV-235X/SV-231X/
SV-2315X/SV-2313X
◆
◆
No playback picture or the picture
is distorted
◆
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
◆
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
◆
Noise bars or streaks on playback
◆
Press the PROG/TRK (" or ❷) / TRK (
minimize this effect.
When the ❿II button is pressed
during playback, the still picture
has severe “noise bars” streaks
◆
A still picture may have “noise bars”, depending on the
condition of the tape. Press the PROG/TRK (" or ❷) / TRK
( or ) buttons during SLOW motion to minimize this effect.
Video Head Cleaning
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the VCR test
pattern your TV does not find the test pattern
or the pattern when found suffers from
interference, it may be due to the VCR output
channel clashing with the normal TV
transmissions in your area. To prevent this
you will need to change the VCR output
channel in the following way
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the VCR.
2. Carry out the instructions “Tuning Your Television for the VCR”
(see page 14).
3. Carry out the instructions “Setting the VCR output Channel”
(see page 17), move the channel number several channels
down from the original setting. (example: from 36 to 33).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the VCR.
5. Re-tune your TV to the VCR again by following instructions
“Tuning Your Television for the VCR” (page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
or
) buttons to
If you are unable to solve the problem after reading the above instructions, note:
◆ The model and serial number on the rear of your VCR
◆ The warranty information
◆ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
44
45
TV Frequency Table (System-B/G)
ELECTRONICS
CITTA’
002~012 :CCIR STD VHF
013~020 :ITALY
021~069 :CCIR STD UHF
071~075 :CCIR CABLE
201~241 :CCIR STD CABLE
DISP CH
Band
Fp
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
V-L
V-L
V-L
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-L
V-L
V-L
V-H
V-H
V-H
V-H
V-H
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
48.25
55.25
62.25
175.25
182.25
189.25
196.25
203.25
210.25
217.25
224.25
53.75
62.25
82.25
175.25
183.25
192.25
201.25
210.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
E02
E03
E04
E05
E06
E07
E08
E09
E10
E11
E12
A
B
C
D
E
F
G
H
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
244~250 :MOROCO
251~255 :BELGUIM
STD
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Italy
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
Germany
Spain
Italy
Austria
Switzerlands
DISP CH
Band
Fp
060
061
062
063
064
065
066
067
068
069
071
072
073
074
075
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
244
245
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
UHF
V-L
V-L
V-L
V-L
V-L
V-L
V-L
V-L
V-L
V-L
V-L
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
UHF
UHF
UHF
UHF
UHF
V-H
V-H
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
69.25
76.25
83.25
90.25
97.25
105.25
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
168.25
231.25
238.25
245.25
252.25
259.25
266.25
273.25
280.25
287.25
294.25
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
163.25
171.25
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
X
Y
Z
Z+1
Z+2
S01
S02
S03
S04
S05
S06
S07
S08
S09
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
M4
M5
Netherlands
Denmark
Finland
Norway
Sweden
STD
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
CCIR
Moroco
Moroco
Belguim
Greece
Portugal
Slovenia
Croatia
DISP CH
246
247
248
249
250
251
252
253
254
255
M6
M7
M8
M9
M10
U1
U2
U3
U4
U5
Moroco
Yugoslavia
Band
Fp
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
V-H
179.25
187.25
195.25
203.25
211.25
226.25
234.25
242.25
250.25
258.25
STD
Moroco
Moroco
Moroco
Moroco
Moroco
Belguim
Belguim
Belguim
Belguim
Belguim
ECNICA AUTORIZZATI SAMSUNG TELEVISORI, VIDEO E PRODOTTI AUDIO
RAGIONE SOCIALE
INDIRIZZO
TELEFONO
AOSTA
C.A.T. DI D’Isanto
C.SO IVREA 82/A
0165/364056
TV/VCR/AUD
ALESSANDRIA
NOVARA
ARONA (NO)
ASTI
BRA’ (CN)
CUNEO
FOSSANO (CN)
CAVALLERMAGGIORE (CN)
IVREA (TO)
TORINO
TORINO
CASCINE VICA-RIVOLI (TO)
SERRAVALLE SESIA (VC)
VERCELLI
PIEMONTE
COSTA SERIO
C.D. ELETTRONICA
CENTRO ASS. VERBANO
TELEPROGRAM
TELETECNICA BRAIDESE
BOTTASSO GIULIO
BERTOLA E CONTRATTO Snc
CANELLO FRANCESCO
TELE ANTENNE IVREA
DIAPASON S.N.C.
RATTI Sas
VIDEO TECNICA di Petrilli
A.R.T.E. s.n.c.
ELEKTRO di Fiore Francesco
VIA ABBA CORNAGLIA 11
STRADA DAMINA 4/C
VIA XXIV MAGGIO 34
CORSO SAVONA 31
VIA VITTORIO EMANUELE 84
VIA CADUTI SUL LAVORO 3
VIA F. SACCO 9/A
VIA ROMA 113
VIA G. DI VITTORIO 2
C.SO SVIZZERA 185
LUNGO DORA SIENA 8
VIA PO 10
CORSO MATTEOTTI 218
VIA TRIPOLI 91
0131/445392
0321/398004
0322/45461
0141/353182
0172/422236
0171/692888
0172/693276
0172/381270
0125/641497
011/7717033/46
011/4360709
011/9572599
0163/450994
0161/250071
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
CHIAVARI (GE)
GENOVA
IMPERIA
LA SPEZIA
SAVONA
LIGURIA
EMI ELETTRONICA
T.T.S. SNC
P.D. ELECTRONIC
C.A.T. ELETTRONICA
AL.FA. SERVICE SNC
VIA PIACENZA 108
VIA A. RIMASSA 183R
VIA GARESSIO 116
VIA CARRANDO 56
VIA PAGANINI 21R
0185/322464
010/5536076
0183/272495
0187/511110
019/805646
TV/VRC/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
ARESE (MI)
BERGAMO
BOVISIO M.GO (MI)
BRESCIA
COMO
CREMONA
LECCO
MANTOVA
MELEGNANO (MI)
LODI (MI)
MILANO
MILANO
MILANO
MILANO
VIMERCATE
PAVIA
SONDRIO
TREVIGLIO (BG)
BUSTO ARSIZIO (VA)
VARESE
ARESE SERVICE
MERLA CLAUDIO
DITTA CAT Bersani & Morello
TRM ELETTRONICA
ELECTRONIC’S CENTER
S.T.A.R.T. VIDEO HIFI
IMPEL DI NOBILE & C. SNC
TECNOVIDEO SNC
CAT ELECTRONIC
CAT ELECTRONIC
ELETTRONICA SERVICE
NUOVA TELESTEREO S.R.L.
TELEMARK SRL
TELE-VIDEO SERVICE
F.G.R. ELECTRONIC SRL
COMPTELECTRO di Mussi
GBP ELETTRONICA
TELEVIDEO SERVICE Snc
S.A.R.T.E. di Marin Eligio
VARESE SERVICE SNC
VIA MATTEI 48
VIA LONGO 11
VIA DESIO 22
VIA TOSCANA 65
VIA GIULINI 9
VIA ORTI ROMANI 16/A
VIA TITO SPERI 9
P.ZZA DE GASPERI 28
VIA P. TOGLIATTI 8
VIA CADAMOSTO 21
VIA L. TOLSTOI 37
VIA PAOLO BASSI 29
VIA C. TACITO 6
VIA P. SOTTOCORNO 52
VIA PELLEGATTA 34/A
VIALE LIBERTA’ 63
VIA BRENNERO 7
VIA C. BATTISTI 17
VIA TORINO 28/A
VIALE BORRI 146
02/93581248
035/271959
0362/558421
030/221255
031/279820
0372/38731
0341/366059
0376/321554
02/9834498
0371/412389
02/475609
02/66805833
02/55019838
02/70126892
039/6082592
0382/304160
0342/219466
0363/47946
0331/302563
0332/811630
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
BELLARIA (RN)
BOLOGNA
IMOLA
FERRARA
FORLI’
MODENA
PARMA
PIACENZA
RAVENNA
REGGIO EMILIA
RICCIONE (RN)
MASINI PAOLO
M.C.R.
COOP. ELECTRA
NIKAM
RIVA E MAZZA
AUDIO VIDEO CENTER SRL
CHIAPPARINI E MELEGARI
SELE.NORD s.n.c.
L.M.S. SNC
RTE SNC
TECNOSERVICE S.N.C.
VIA MEDITERRANEO 24
VIA FACCINI 4 C/D
VIA PAMBERA 8/B
VIA BONAFINI 34
VIALE BIDENTE 67
VIA VANDELLI 23/29
VIA SPEZIA 106
VIA NASTRUCCI 14
VIA LANCIANI 78
VIA PREMUDA 38/V
VIA CORTEMAGGIORE 7
0541/347714
051/374989
0542/35814
0532/900938
0543/781380
059/235219
0521/982253
0523/592273
0544/590867
0522/381277
0541/641400
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
FELETTO (UD)
S. MARTINO AL CODROIPO (UD)
PORDENONE
TRIESTE
UDINE
CM ELETTRONICA SNC
TOP SERVICE
ELETTRONICA PORDENONESE
S.A.E. s.n.c.
M.Z. ELETTRONICA
VIA G. GALILEI 2
VIA ERMINIA 57
VIA UNGARESCA 3/B
VIA CARPINETO 8/1
P.ZZA 1° MAGGIO 22
0432/572172
0432/909981
0434/366667
040/827960
0432/501479
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
BELLUNO
MESTRE (VE)
PADOVA
PADOVA
ROVIGO
S. MICHELE (VR)
S. VENDEMIANO (TV)
TREVISO
VICENZA
ROSA’ (VI)
VENETO
S & B SNC
DIGITAL SNC
FALCARO RENZO
SETES
A.T.I.R. di Marchetti P.I. M.
LABORATORY CENTER
BIGNU’ SNC
MATTIAZZI ALESSANDRO
TODESCO ARMANDO & C. SNC
ELECTRONIC SERVICE SNC
VIA FELTRE 192
VIA VERDI 109
VIA VIGONOVESE 145 ABC
VIA SS.FABIANO e SEBASTIANO 34
VIA CONFALONIERI 15
VIA UNITA’ D’ITALIA 142
VIA LIBERAZIONE 13
V. SCUDETTO di S.Giuseppe 19
VIA TORRETTI 20
QUART. CREMONA 2
0437/942070
041/989407
049/8702346
049/8686200
0425/33797
045/973466
0438/400120
0422/430318
0444/505470
0424/581945
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
BOLZANO
GARDOLO TRENTO
TRENTINO A. ADIGE
TELECROM
ELETTRA S.N.C.
VIA MACELLO 63
VIA BASSA 2/A
0471/971178
0461/961255
TV/VCR/AUD
TV/VCR/AUD
BRACCIANO (RM)
CASSINO (FR)
CIVITAVECCHIA (RM)
FROSINONE
LATINA
LIDO DI OSTIA (RM)
RIETI
ROMA
ROMA
ROMA
ROMA/ S. PAOLO
ROMA
ROMA/VILLA ADRIANA
VELLETRI (RM)
VITERBO
LAZIO
CECCHINI GIUSEPPE
VIDEOTECNICA di Bino Russo
R.F. ELETTRONICA
TELESERVICE Snc
ELETTRONICA MURARO
ASSISTENZA TECNICA di Gregori
CAMPOGIANI MAURIZIO
BENCIVENNI GASTONE
E.C.S. SNC
EL.S.A.R. SNC
PETROSELLI ELSA
PETROSELLI ELSA
S.C.F. SNC DI SCALISE A.
ELETTRONICA VELITERNA sdf
VIDEO SERVICE di Calabrese
VIA GARIBALDI 25/A
VIA FALAISE 28/30
VIA BRAMANTE 45
VIA ALDO MORO 134
VIA MARCONI 38/40
VIA TRAGHETTI 30
VIA CAVOUR 21
P.ZZA DEI CONDOTTIERI 29
VIA AURELIA 838
VIA SAN SOTERO 36
VIA A. CIALDI 35
V.LE CITTA’ D’EUROPA 817
VIA LAGO D’ANNONE 2/4
VIA U. MATTOCCIA 16
STRADA TEVERINA KM. 2 - 400
06/99804687
0776/23283
0766/35489
0775/270542
0773/697960
06/5694642
0746/482876
06/21703043
06/6636016
06/6380516
06/5127753
06/5294264
0774/381354
06/9626196
0761/251557
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
LOMBARDIA
EMILIA ROMAGNA
FRIULI VENEZIA GIULIA
Legenda :
TV = TELEVISORI
VCR = VIDEOREGISTRATORI e VIDEOLETTORI
AUD = PRODOTTI AUDIO
La presente lista è aggiornata al 30/04/98 e soggetta a continue variazioni.
46
LEGENDA
VALLE D’AOSTA
47
CITTA’
RAGIONE SOCIALE
INDIRIZZO
TELEFONO
LEGENDA
FOLIGNO (PG)
PERUGIA
TERNI
UMBRIA
TECNOSERVICE SNC
VIDEOLAB dI Tomassoni
NUOVA CEA DI CARLONI
VIA MANCINELLI 1/A
VIA SILVIO PELLICO 13
VIA MONTEGRAPPA 9A/B
0742/344636
075/33154
0744/285841
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
AREZZO
FIRENZE
GROSSETO
LIVORNO
MARLIA CAPANNORI(LU)
MASSA
PIOMBINO (LI)
PISA
PISTOIA
PONSACCO (PI)
PORTOFERRAIO (LI)
PRATO (PO)
S. MARTINO (SI)
VIAREGGIO
TOSCANA
GIUSTINI PRIMO
PUNTO VIDEO di Parigi Federico
VIDEOTECNICA SNC
CIUCCI PERLUIGI
NANNINI ELETTRONICA
SAEC di Coppa
PANNOCCHIA ANTONIO
CALONI & DE NISCO s.n.c.
EMMEPI sdf di Pereira e Sforzi
ELETTRONICA GTE
ELBASAT
ACROMA
CENTRO ASSISTENZA HIFI
CASTALDI B. e FAVILLA M. & C.
L.GO 2 GIUGNO 14
VIA ZAMBRINI 21
VIA C. PAGANICO 5/A
VIA MAGGI 136
VIALE PAOLINELLI 76
VIA RINCHIOSTRA NORD 34
VIA A. GARIBALDI 60/62
VIA M. NELLI 13-15
VIA BONELLINA 16C
V.LE DELLA RIMEMBRANZA 18
LOC. CARPANI 135
VIA DI GALCETI 12/A
VIA DELLA REPUBBLICA 13
VIA AURELIA NORD 98 INT
0575/910882
055/416619
0564/491653
0586/899721
0583/308137
0585/251724
0565/38171
050/553081
0573/367363
0587/732453
0565/916494
0574/462255
0577/318420
0584/942535
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
ANCONA
ASCOLI PICENO
CORRIDONIA (MC)
MONTEGRANARO (AP)
PESARO
AUDIOVIDEO SERVICE
PLURITECNICA s.n.c.
C.R.T. di Brilloni e Vecchioni
F.N.T. di Ferroni-Pagliari & C.
CAT SNC
VIA BARILATTI 25
VIA C. ULPIANI 5
VIA DELLA PORTARELLA 45
VIALE ZACCAGNINI 56
VIA CECCHI 25
071/2802050
0736/342635
0733/433951
0734/891995
0721/25608
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
LANCIANO (CH)
L’AQUILA
TERAMO
VILLARASPA SP. (PE)
ABRUZZO
DI FLORIO ALESSANDRO
C.E.A.C. s.n.c.
BELLONE VITTORIO
D.G.M. ELETTRONICA SNC
VIA S. SPIRITO 40
VIA F.P. TOSTI 40/A
VIA DELL’AEROPORTO 76/78
VIA ITALIA 202/204
0872/46000
0862/413363
0861/415745
085/414323
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
AGNONE (IS)
RICCIA (CB)
MOLISE
CLR ELETTRONICA
TELECOM AUDIO VIDEO SVC
VIALE V. VENETO 44
VIA VITTORIO EMANUELE 67/69
0865/79402
0874/716783
TV/VCR/AUD
TV/VCR/AUD
AVELLINO
BENEVENTO
MONTESARCHIO (BN)
CAPACCIO SCALO (SA)
CASERTA
ORTA DI ATELLA (CE)
CASORIA (NA)
CAST DI STABIA (NA)
NAPOLI
NAPOLI
LACCO AMENO (NA)
SALERNO
CAMPANIA
L.V.E. SNC
TELEART di Di Gioia
EMMEDI ELETTRONICA
BARRA MASSIMO
AUDIO SERVICE
MASTER SERVICE SRL
TECNO SERVICE di De Rosa
MIGLIARDI LUIGI
ERREDIESSE SERVICE SAS
RD ELETTRONICA SERVICE S.A.S.
TELESAT S.N.C.
F.LLI LAMBERTI A. & G. s.n.c.
VIA TEDESCO 304
V.LE PRINCIPE DI NAPOLI 161
VIA G. MATTEOTTI 3
VIA RETTIFILO 12
VIA CATTANEO 4/6
VIA TOSCANINI 7/9
VIA NAZ. DELLE PUGLIE 176/A
VIA PLINIO IL VECCHIO 19/29
VIA MASCAGNI 74/76
VIA CALDIERI 124/126
VIA BORBONICA 72
VIA G. DEL MERCATO 20/22/24
0825/74260
0824/28896
0824/834648
0828/723365
0823/329099
081/5021382
081/5844454
081/8723865
081/5794825
081/5602608
081/980620
089/755700
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
VCR/AUD
TV
TV/VCR/AUD
TV/VCR/AUD
BARI
BRINDISI
FOGGIA
FOGGIA
LECCE
MAGLIE (LE)
RUVO DI PUGLIA (BA)
TARANTO
A.D. SERVICE SNC
GUARINO COSIMO
PICI ANTONIO
VALECCE SALVATORE
MICROKEY S.R.L.
CISE ELETTRONICA
BRUCOLI ROCCO
A.T.A. SYSTEM SRL
VIA STRADA CALVANI 27-29-31
VIA PROV. SAN VITO 189
VIA G. DORSO 35
VIA FRACCACRETA 13 15 17
VIA B. MAZZARELLA 35/37
VIA V. EMANUELE 33
VIA OBERDAN 70
VIA EMILIA 119
080/5020006
0831/451522
0881/617949
0881/686742
0832/344440
0836/423500
080/813268
099/7375381
TV/VCR/AUD
TV/VCR/AUD
TV
AUD/VCR
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
MATERA
POLICORO (MT)
POTENZA
BASILICATA
RICCARDI COSIMO
FINOCCHIARO PASQUALE
REMOLLINO E LORUSSO
VIA S. STEFANO 51
V.LE SALERNO 28/4
VIA MESSINA 8/10
0835/333671
0835/972838
0971/444243
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
CASTROVILLARI (CS)
COSENZA
CARIATI MARINA (CS)
CROTONE (KR)
ARDORE MARINA (RC)
REGGIO CALABRIA
CATANZARO LIDO
TAURIANOVA(RC)
VIBO VALENTIA (CZ)
ABENANTE ALBERICO
PALADINO CARMINE
FRONTERA GIUSEPPE
BALZANO E VELLONE s.n.c.
LAB. 2000 DI G. MURDACA
RADIOTECNICA REGGINA
STM ELETTRONICA
CIANO GIUSEPPE
AUDIO VIDEO SNC
VIA DELLA LIBERTA’ 115
VIA E. DE DONATO 15
VIA FIRENZE 10/12 —- 0347/3446302
VIA 1° MAGGIO 29
VIA FOSCOLO 71
V.LE CALABRIA 68
TRAV. CROTONE 16
VIA CIRCONVALLAZIONE SUD
VIA DE GASPERI 44
0981/27648
0984/481468
0983/968713
0962/21173
0964/629608
0965/592000
0961/34951
0966/643483
0963/45571
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
BAGHERIA (PA)
CALTAGIRONE (CT)
CALTANISSETTA
CAPO D’ORLANDO (ME)
CATANIA
FAVARA (AG)
MENFI (AG)
MESSINA
PALERMO
RAGUSA
SIRACUSA
TRAPANI
AUDIO E VIDEO BRUNO S.
ELETTRONICA VISALCO SDF
AUDIO VIDEO SRL
PROFESSIONAL SERVICE
AVS AUDIO SDF
BACCHI IGNAZIO
MESSINA G. & RIPORTELLA G.
ROMEO GIOVANNA
E.C.S. SNC di Barrale
RADIOFRANCO DI GOZZI I.
R.E.I. SERVICE
SURDO MARCO
VIA V. VENETO 38
VIA SARDEGNA 33
VIA DON MINZONI 52/54
VIA XXVII SETTEMBRE 22/B
VIA SASSARI 2/C
P.ZZA ANGELO GIGLIA 40
VIA MANDORLO 60
VIA S. GIOVANNI BOSCO 8
VIA C. GIANQUINTO 52
C.SO VITTORIO VENETO 568
VIA GORIZIA 43/B
VIA FIRENZE 38
091/900795
0933/21339
0934/552111
0941/912818
095/446696
0922/420311
0925/75194
090/774403
091/409438
0932/255855
0931/464429
0923/554157
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
CAGLIARI
CARBONIA (CA)
LANUSEI (NU)
NUORO
BOLOTANA (NU)
OLBIA (SS)
ORISTANO
SASSARI
LABOR TVC SNC di Atzeni
VIDEOELETTRONICA di Angelucci
IBBA TONINO
CENTRO ASS. GODDI A.
VIDEOTECNICA DI ORTU N.
HIFI CENTER di Pintore
LA VIDEO ELETTRONICA snc
TECNOSERVICE SNC di Simula
VIA OGLIASTRA 40
VIA SATTA 210/212
VIALE EUROPA 190
VIA P. MASTINO 46
VIA STAZIONE 118
VIA LUCANIA 15
VIA SARDEGNA 91
VIA GALILEO GALILEI 47
070/285292
0781/660475
0782/42878
0784/33171
0785/43484
0789/22164
0783/300026
079/273155
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
TV/VCR/AUD
MARCHE
THIS APPLIANCE IS DISTRIBUTED BY
ELECTRONICS
PUGLIA
Questo apparecchio è fabbricato in conformità al D.M.28.08.95.N.548 ed in
particolare a quanto specificato nell’ Art. 2, comma 1.
CALABRIA
SICILIA
SARDEGNA
Legenda :
TV = TELEVISORI
VCR = VIDEOREGISTRATORI e VIDEOLETTORI
La presente lista è aggiornata al 30/04/98 e soggetta a continue variazioni.
48
AUD = PRODOTTI AUDIO
www.samsungvcr.com
AC68-00458A