Canon POWERSHOT SD1000 User guide

Cov-Basic.fm Page 1 Thursday, December 7, 2006 8:46 PM
ENGLISH
The Components Guide
Preparations
Shooting
Playback/Erasing
Menus and Settings
Printing
Downloading Images to
a Computer
Basic
Camera User Guide
Please Read This First
This guide explains how to prepare the camera and use its basic features.
CDI-E286-010
XX07XXX
© 2007 CANON INC.
PRINTED IN JAPAN
Flowchart and Reference Guides
The following guides are available. Refer to them as necessary according to the
flowchart below.
For information on included items and
items sold separately
System Map
The Components Guide
Preparations
• Charging the battery
• Installing the battery and memory card
• Setting the date, time and language
Shooting
Playback/Erasing
Basic Camera User
Guide (This Guide)
• Read this first.
Menus and Settings
Handling precautions, references to the
various shooting and playback functions
Printing
• Installing the software
• Downloading images to a computer
• Using the software
Advanced Camera
User Guide
Direct Print User
Guide
Basic Camera User
Guide (This Guide)
Software Starter Guide
You may not be able to achieve the full
performance of this camera with the
included memory card.
ZoomBrowser EX/
ImageBrowser Software
User Guide
• PDF manuals available on
the Canon website.
http://web.canon.jp/Imaging/
information-e.html
In this guide, the Basic Camera User Guide is called the Basic Guide, and the Advanced
Camera User Guide is called the Advanced Guide. Also, "battery" refers to the battery pack.
The Components Guide
„ Front View
cde
f
g
b
a
a
b
c
d
e
f
g
h
Wrist Strap Mount
Microphone (Advanced Guide pp. 41, 90, 91)
AF-assist Beam (Advanced Guide p. 24)
Red-Eye Reduction Lamp (Advanced Guide p. 35)
Self-Timer Lamp (p. 16)
Viewfinder Window (Advanced Guide p. 18)
Flash (p. 14)
Lens
Attaching the Wrist Strap
The Components Guide
h
How to Open the Terminal Cover
Toggle
The toggle's position on
the strap can be
changed. It can also be
used to open the
DIGITAL terminal cover
and when inserting or
removing a memory
card.
In order to avoid dropping the camera, wear the wrist strap
when using the camera.
1
„ Back View
a
b
c
d
e
h
f
g
a
b
c
d
e
f
g
h
LCD Monitor (Advanced Guide pp. 12, 15)
Viewfinder (Advanced Guide p. 18)
DIGITAL Terminal (p. 27)
A/V OUT (Audio/Video output) Terminal (Advanced Guide p. 100)
Terminal Cover
Tripod Socket
DC Coupler Terminal Cover (Advanced Guide p. 130)
Memory Card Slot/Battery Cover (p. 6)
The interface cable and AV cable cannot be connected
simultaneously.
The LCD monitor may be covered with a thin plastic film
for protection against scratches during shipment. If so,
remove the film before using the camera.
2
„ Controls
a
b c de
f
g
h
l m
k
o
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
Power Lamp
Power Button (p. 9)
Indicators (p. 4)
Zoom Lever (p. 14, Advanced Guide p. 76)
Shooting:
(Wide Angle)/
(Telephoto)
Playback:
(Index)/
(Magnify)
Shutter Button (p. 10)
Speaker
Mode Switch (pp. 9, 11)
(Print/Share) Button (pp. 22, 30, Advanced Guide pp. 66, 67)
FUNC./SET (Function/Set) Button (p. 20, Advanced Guide p. 22)
DISP. (Display) Button (Advanced Guide p. 12)
MENU Button (p. 21, Advanced Guide p. 23)
(Macro)/
(Infinity)/
Button (p. 15)
(ISO Speed)/
(Jump)/
Button (Advanced Guide pp. 65, 79)
(Flash)/
Button (p. 14)
(Continuous)/
(Self-timer)/
(Single Image Erase)
/
Button (pp. 16, 19, Advanced Guide p. 36)
The Components Guide
n
ij
3
Indicators
The camera indicators light or blink under the following
circumstances.
Never do the following while an indicator is blinking green.
These actions may corrupt image data.
• Shake or jolt the camera
• Shut off the power, or open the memory card slot/battery
cover
„ Upper Indicator
Green:
Blinking Green:
Ready to shoot (camera beeps twice)
Time Lapse (movie) recording/Image recording/
reading/erasing/transferring (when connected to
a computer/printer)
Orange:
Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
„ Lower Indicator
Yellow:
Macro mode/infinity mode/AF lock mode
Blinking Yellow: Focusing difficulty (camera beeps once)
4
Preparations
1. Charging the Battery.
Charge the battery before use under the following circumstances.
• When using the battery for the first time.
• When the "Change the battery pack." message displays.
1. Insert the battery into the battery charger.
2. Plug the battery charger (CB-2LV) into a power outlet, or
attach the power cord to the battery charger (CB-2LVE) and
plug it into a power outlet.
• Battery charger model names and types vary by region.
The charge indicator will light orange while the battery is
charging. It will change to green when the charge is complete.
Charging takes approximately 1 hour 30 minutes.
Preparations
Charge Indicator
Align these symbols
For CB-2LV
For CB-2LVE
To protect the battery and prolong its life, do not charge it for
longer than 24 hours continuously.
Î See the Advanced Guide: Battery Handling (p. 126).
5
2. Installing the Battery.
1. Slide the memory card slot/battery cover and open it (a,
b).
2. Push the battery lock in the direction of the arrow (c) and
insert the battery until it locks.
To remove the battery, push the battery lock in the direction of
the arrow (c) and hold it while pulling the battery out.
Battery Lock
a
c
b
3. Inserting the Memory Card.
1. Insert the memory card until it clicks into place.
2. Close the memory card slot/battery cover (a, b).
b
Front
a
Ensure that the memory card is correctly oriented before
inserting it in the camera. Inserting it backward may cause
the camera to fail to recognize the memory card or to
malfunction.
Î See the Advanced Guide: Handling the Memory Card (p. 128).
Î See the Advanced Guide: Formatting Memory Cards (p. 29).
6
„ To Remove the Memory Card
Push the memory card with your finger or the toggle on the wrist strap
until the memory card clicks and then release it.
You can use SD memory cards, SDHC memory cards and
MultiMediaCards with this camera. These cards are collectively
called memory cards in this guide.
Preparations
7
First Time Settings
„ Setting the Date/Time
a
b
c
1. Press the power button (a).
2. Use the
or
button to select an item and the
or
button to change its value (b).
To set the daylight saving option, select the
icon and use the
or
button to configure the setting.
3. Confirm that the correct time is displayed and press the
FUNC./SET button (c).
The date and time can also be set in the Set up menu (p. 21).
• A rechargeable lithium battery is built into the camera
to save such settings as the date/time. This battery
charges when the main battery is in the camera. When
you purchase the camera, place the main battery in it
for approximately four hours or use AC Adapter Kit
ACK-DC10 (sold separately) to charge the lithium battery. It will charge even if the camera is turned off.
• The date/time settings may be lost after approximately
three weeks if you remove the main battery. Reset the
date/time settings if this occurs.
Î See the Advanced Guide: Setting the World Clock (p. 20).
8
BasicGuide_E.fm Page 9 Friday, December 15, 2006 10:36 AM
„ Setting the Display Language
1. Slide the mode switch to
(playback).
2. Hold down the FUNC./SET button and press the MENU
button.
or
button to select a language and
3. Use the , ,
press the FUNC./SET button.
The display language can also be set in the Set up menu (p. 21).
Shooting
1. Press the power button.
Power button
Î See the Advanced Guide: Using the LCD Monitor (p. 12).
Î See the Advanced Guide: Power Saving Function (p. 19).
Î See the Advanced Guide: Set up Menu (p. 26).
Î See the Advanced Guide: My Camera Menu (p. 28).
2. Set the shooting mode to
Shooting
The start-up sound will play and the
start-up image will display in the LCD
monitor.
• Pressing the power button again turns
the power off.
• To switch to the setting that mutes all
sounds (except for the warning sound),
press and hold the DISP. button while pressing the power button.
(Auto).
1. Slide the mode switch to
(Rec.)
(a).
2. Press the FUNC./SET button (b)
and use the
or
button (c) to
select
(auto).
3. Press the FUNC./SET button (d).
3. Aim the camera at the subject.
a
c
b d
9
4. Focus and shoot.
1. Press the shutter button halfway to Indicators
focus.
When the camera focuses, it beeps
twice and the indicator lights green
(orange when the flash fires). In
addition, a green AF frame appears in
the LCD monitor on the portion of the
image used to set the focus.
2. Press the shutter button fully to
shoot.
The shutter sound will play and the
image will record. The indicator will
blink green while the image is
recorded to the memory card.
Î See Indicators (p. 4).
the Advanced Guide for the various shooting methods
Î See
available.
„ Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is displayed in the LCD monitor.
To stop displaying the image, press the shutter button halfway.
Î See the Advanced Guide: Review (p. 24).
the Advanced Guide: Checking for Focus Right After
Î See
Shooting (p. 70).
Î See Erasing (p. 19).
10
Selecting a Shooting Mode
1. Slide the mode switch to (Rec.) or (Movie) (a).
2. Press the FUNC./SET button (b) and use the or
button (c) to select a shooting mode.
For a scene mode (p. 12), select the
mode (default setting) and
press the MENU button to select the desired mode.
3. Press the FUNC./SET button (d).
a
c
b d
Shooting
11
„ Shooting Modes
Still Images
Auto
The camera automatically selects settings.
Manual
Allows you to select settings yourself, such as the exposure compensation, white balance, my
colors or ISO speed.
Stitch Assist
Allows you to shoot overlapping images that can later be merged
(stitched) to create one panoramic image on a computer.
Select [Stitch Assist] from the [ (Rec.)] menu.
Î See the Advanced Guide (p. 44).
Digital Macro
Allows you to shoot when the distance from the lens (at maximum wide
angle) to the subject is within 3 – 10 cm (1.2 – 3.9 in.). The subject can be
shown larger than in standard macro mode because the camera trims the
image edges and zooms in with the digital zoom.
Î See the Advanced Guide (p. 34).
Portrait
Produces a soft effect
when photographing
people.
Color Accent
Use this option to have
only the color specified in
the LCD monitor remain
and to transform all others
to black and white.
Î See the Advanced Guide (p. 60).
Night Snapshot
Allows you to take
snapshots of people against
twilight or night backgrounds
by reducing the effects of
camera shake even without
using a tripod.
Color Swap
Use this option to
transform a color
specified in the LCD
monitor into another.
Î See the Advanced Guide (p. 62).
Scene Mode
You can shoot with the most appropriate settings for a scene.
Kids&Pets
Allows you to capture
subjects that move
around, such as
children and pets,
without missing photo
opportunities.
12
Indoor
Prevents camera shake and
maintains the subject's true
color when shooting under
fluorescent or tungsten
lighting.
Foliage
Shoots trees and
leaves—such as new
growth, autumn leaves
or blossoms—in vivid
colors.
Beach
Shoots without
making people
appear dark near
water or sand where
reflected sunlight is
strong.
Snow
Shoots without a blue tinge
and without making people
appear dark against a
snowy background.
Fireworks
Captures fireworks in the
sky sharply and at optimal
exposure.
Aquarium
Selects the optimal ISO speed, white balance and color balance to
capture fish and other items in an indoor aquarium.
Underwater
Movie
Shooting
Appropriate for shooting images with Waterproof Case WP-DC13 (sold
separately). This mode uses an optimal white balance setting to
reduce bluish tones and record images with a natural hue.
Movie
Shoots a movie when you press the shutter button.
You can select from the following modes: [
Standard]; [
Fast Frame Rate] suitable for
sports or fast motion; [
Compact] convenient for email attachments; [
Color Accent] for
recording all colors in black and white except for the selected color; [
Color Swap] for
recording a selected color as a different color; and [
Time Lapse] for shooting one frame at a
time at a set interval. Î See the Advanced Guide (p. 39).
• The shutter speed is slow in
mode. Always use a tripod
to avoid camera shake.
• In
,
,
,
,
,
or
mode, the ISO speed
may increase and cause noise in the image depending on
the scene being shot.
• In
mode, shoot with the subject 1 m (3.3 ft.) or more
from the end of the lens.
• To shoot underwater, install the camera in Waterproof
Case WP-DC13 (sold separately).
• We recommend you use Waterproof Case WP-DC13 for
shooting at ski resorts or beaches.
13
Using the Zoom
1. Press the zoom lever toward
or
.
The zoom can be adjusted from 35 – 105 mm (focal length) in
35mm film equivalent terms.
Wide Angle: Zooms out from the subject.
Telephoto: Zooms in on the subject.
Using the Flash
1. Press the
button (a) and use the
switch between modes (b).
or
a
button to
Auto
On
Off
b
Î See the Advanced Guide: Red-Eye Reduction Function (p. 35).
Î See the Advanced Guide: Setting the Slow Synchro Function (p. 35).
You are recommended to shoot with the camera attached to
a tripod or other device if the camera shake warning icon
appears.
The
option cannot be set in
(Auto) mode.
Î See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160).
Î See Selecting a Shooting Mode (p. 11).
14
Shooting Close-Ups/Infinity Shots
1. Press the
/ button (a) and use the
to switch between modes (b).
or
button
To Cancel: press the
display
(Normal).
or
button to
/
button and use the
a
b
Image Area at Minimum Focusing Distance from End of Lens to Subject
• Maximum wide angle setting: 37 × 27 mm (1.5 × 1.1 in.)
Minimum focusing distance: 3 cm (1.2 in.)
• Maximum telephoto setting: 108 × 81 mm (4.3 × 3.2 in.)
Minimum focusing distance: 30 cm (12 in.)
Infinity
Use this mode to record subjects 3 m (9.8 ft.) or more from the end of
the lens.
Shooting
Macro
Use this mode to shoot close-ups of flowers or small items.
• Use the LCD monitor to compose close-ups in macro mode
since images composed with the viewfinder may be offcenter.
• The exposure may not be optimal when the flash is used in
macro mode.
The
option cannot be set in
(Auto) mode.
Î See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160).
Î See Selecting a Shooting Mode (p. 11).
15
Using the Self-Timer
1. Press the
button (a) and use the
(b) to display ,
or .
or
button
• When the shutter button is pressed fully, the self-timer will
activate and the self-timer lamp will blink (when using red-eye
reduction, it will stay lit for the last 2 seconds).
• You can change the delay time and number of shots with the
option (p. 17).
To Cancel: press the
button and display
.
a
b
10 sec. Self-Timer: shoots 10 sec. after you press the shutter
button.
• 2 sec. before the shutter releases, the self-timer lamp and sound
speed up*1.
2 sec. Self-Timer: shoots 2 sec. after you press the shutter
button.
• The self-timer sound beeps quickly*1 when you press the shutter
button and the shutter releases 2 sec. later.
Custom Timer: you can change the delay time (0–10*2, 15, 20,
30 sec.) and number of shots (1–3*2–10).
• When [Delay] is set to 2 or more sec., the self-timer sound beeps
quickly 2 sec. before the shutter releases. When [Shots] is set to
more than 1, the self-timer sound only beeps before the first shot.
*1 This may differ depending on your My Camera settings (Advanced Guide p. 109).
*2 Default setting.
The self-timer cannot be used in some shooting modes.
Î See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160).
Î See Selecting a Shooting Mode (p. 11).
16
„ Changing the Delay Time and Number of Shots (
1. In the [ (Rec)] menu, select
[Self-timer] and press the FUNC./
SET button.
)
Î See Menus and Settings (p. 21).
2. Use the
or
button to select
[Delay] or [Shots] and the
or
button to change the setting and
press the FUNC./SET button.
3. Press the MENU button.
Shooting
If the [Shots] option is set to 2 or more shots, the following
occurs.
• The exposure and white balance are locked at the settings selected for the first shot.
• If the flash is used, the interval between shots lengthens
because the flash must charge.
• The interval between shots lengthens when the built-in
memory of the camera fills.
• Shooting will automatically cease if the memory card
becomes full.
17
BasicGuide_E.fm Page 18 Friday, December 15, 2006 10:24 AM
Playback
1. Slide the mode switch to
(playback) (a).
The last recorded image will display. Or if you have replayed
images, the last image viewed will display (Resume Playback).
If the memory card has been switched, or the images on the
memory card have been edited with a computer, the newest image
on the memory card appears.
a
b
2. Use the
or
button to display the image you wish to
view (b).
• Use the
button to move to the previous image and the
button to move to the next image. Holding the button down
advances the images more rapidly, but shows them less clearly.
the Advanced Guide for the various playback methods
Î See
available
18
Erasing
1. In the playback mode, use the
or
an image to erase (a) and press the
button to select
button (b).
c
a
b
2. Confirm that [Erase] is selected and
press the FUNC./SET button (c).
To exit instead of erasing, select [Cancel].
Î See the Advanced Guide: Erasing Images (p. 101).
Playback/Erasing
Please note that erased images cannot be recovered.
Exercise adequate caution before erasing an image.
19
Menus and Settings
Settings for the shooting or playback modes or such camera settings
as the print settings, date/time and sounds are set using the FUNC.
menu or the Rec., Play, Print, Set up or My Camera menu.
FUNC. Menu
This menu sets many of the common shooting functions.
a
b
e
c
d
This example shows the FUNC. menu in
(Auto) mode.
a Slide the mode switch to
or
.
b Press the FUNC./SET button.
c Use the
or
button to select a menu item.
• Some items may not be selectable in some shooting modes.
d Use the
or
button to select an option for the menu item.
• You can select further options with the MENU button for some
options.
• After selecting an option, you can press the shutter button to
shoot immediately. After shooting, this menu will appear again,
allowing you to adjust the settings easily.
e Press the FUNC./SET button.
Î See the Advanced Guide: Menu List (p. 24).
20
Rec., Play, Print, Set up and My Camera Menus
Convenient settings for shooting, playback or printing can be set with
these menus.
(Set up) Menu
(Rec.) Menu
(My Camera) Menu
a
b You can switch
between menus
or
with the
button when this
part is selected.
e
c
d
a Press the MENU button.
b Use the
or
button to switch between menus.
• You can also use the zoom lever to switch between menus.
c Use the
or
button to select a menu item.
• Some items may not be selectable in some shooting modes.
d Use the
or
button to select an option.
• Menu items followed by an ellipsis (...) can only be set after
pressing the FUNC./SET button to display the next menu.
Press the FUNC./SET button again to confirm the setting.
e Press the MENU button.
Menus and Settings
• This example shows the Rec. menu in
(Auto) mode.
• In playback mode, the Play, Print, Set up and My Camera
menus display.
Î See the Advanced Guide: Menu List (p. 24).
21
BasicGuide_E.fm Page 22 Friday, December 15, 2006 10:24 AM
Printing
You can easily print by connecting the camera to a direct print
button
compatible printer*1 with a cable and simply pressing the
on the camera.
1. Connect the camera to a direct print compatible printer
and turn on the printer's power.
Canon Brand Printers
SELPHY Series
Compact Photo Printers*2
Interface Cable
Camera
PIXMA Series
Bubble Jet Printers
*1 Since this camera uses a standard protocol (PictBridge), you can use it with other
PictBridge-compliant printers in addition to Canon-brand printers.
*2 You can also use the CP-10/CP-100/CP-200/CP-300 card photo printers.
22
2. Set the camera to the playback mode, turn on the
power and confirm that ,
or
upper left of the LCD monitor (a).
is displayed in the
• The
button will light blue.
• The displayed icon will vary according to the printer model.
•
will display in the movie mode.
3. Use the
press the
• The
or
button to select an image to print (b) and
button (c).
button will blink blue and printing will start.
a
c
b
Î See the Advanced Guide: Setting the DPOF Print Settings (p. 103).
Î See the Direct Print User Guide.
Î See the user guide for your printer.
Printing
23
Downloading Images to a Computer
The following methods can be used to download images recorded by
the camera to a computer. Some methods, depending on the OS
used, may not be available. Please read System Requirements (p. 25)
in advance.
„ Camera to Computer Connection
Supplied Software
Downloading Method
OS Windows 2000
Windows XP
Windows Vista
Mac OS X
Computer System
Requirements
Install It
Do Not Install It
Computer
Procedure
Camera
Procedure
Computer
Procedure
z
z
z
z
z
z
z
z
z
z
z
–
•Basic Guide (p. 25)
•Software Starter Guide
Connecting the Camera to
•Basic Guide (pp. 26, 27)
a Computer
•Basic Guide
(p. 27)
Downloading Images to •Basic Guide (pp. 28–30)
a Computer
•Software Starter Guide
•Software
Starter Guide
„ Using a Memory Card Reader
A memory card reader can be used with all the operating systems
listed above. See the Software Starter Guide for details.
24
System Requirements
Please install the software on a computer meeting the following
minimum requirements.
„ Windows
Windows 2000 Service Pack 4
Windows XP (including Service Pack 1 and Service Pack 2)
Windows Vista
Computer Model
The above OS should be pre-installed on computers with built-in USB
ports.
CPU
Windows 2000/Windows XP Pentium 500 MHz or higher
Windows Vista
Pentium 1.3 GHz or higher
RAM
Windows 2000/Windows XP 256 MB or more
Windows Vista
512 MB or more
Interface
USB
Free Hard Disk
Space
• Canon Utilities
- ZoomBrowser EX
200 MB or more
- PhotoStitch
40 MB or more
• Canon Camera TWAIN Driver 25 MB or more
Display
1,024 x 768 pixels/High Color (16 bit) or better
„ Macintosh
OS
Mac OS X (v10.3–v10.4)
Computer Model
The above OS should be pre-installed on computers with built-in USB
ports.
CPU
PowerPC G3/G4/G5 or Intel Processor
RAM
256 MB or more
Interface
USB
Free Hard Disk
Space
• Canon Utilities
- ImageBrowser
- PhotoStitch
Display
1,024 x 768 pixels/32,000 Colors or better
Downloading Images to a Computer
OS
200 MB or more
40 MB or more
25
Preparing to Download Images
Ensure that you install the software first before connecting the
camera to the computer.
„ Items to Prepare
• Camera and computer
• Canon Digital Camera Solution Disk supplied with the camera
• Interface cable supplied with the camera
1. Install the software.
1. Place the Canon Digital Camera Solution Disk in the
computer's CD-ROM drive.
2. Click [Easy Installation].
Follow the onscreen messages to
proceed with the installation.
3. When the installation is finished, the
[Restart] or [Finish] button appears.
Click the one that appears.
4. Remove the CD-ROM from the drive
when your normal desktop screen
appears.
Double-click the
in the CD-ROM
window. When the installer panel appears,
click [Install]. Follow the onscreen
instructions to proceed.
26
2. Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
Use the toggle on the wrist strap or slip a fingernail under the
edge of the camera's DIGITAL terminal cover, lift up and plug the
interface cable in all the way.
USB Port
Interface Cable
2. Slide the camera's mode switch to
(playback) and turn on the
power.
The camera and computer will be able
to communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera's
DIGITAL terminal.
Downloading Images to a Computer
Interface Cable
DIGITAL Terminal
If the Digital Signature Not Found window appears,
click [Yes]. The USB driver will automatically finish installing
onto the computer when you attach the camera and open a
connection.
27
BasicGuide_E.fm Page 28 Friday, December 8, 2006 6:23 PM
Downloading Images to a Computer
A window allowing you to set the preferences will appear when a
connection is established between the camera and computer.
1. Select [Canon CameraWindow]
and click [OK] (first time only).
If the window to the right does not
appear, click the [Start] menu and
select [All Programs] or
[Programs], followed by [Canon
Utilities], [CameraWindow],
[PowerShot - IXY - IXUS - DV 6]
and [CameraWindow].
2. Download the images.
• Download the images using the camera or the computer.
• By default, the downloaded images are saved into the [Pictures]
or [My Pictures] folder.
Downloading Images Using the Camera
(p. 30).
Downloading Images Using a Computer.
By default, all images that have yet to be
downloaded will download.
You can set the type of image to
download and the destination folder.
Thumbnails (small versions) of the
downloaded images will display in the
ZoomBrowser EX Main Window. By
default, the downloaded images are
saved into subfolders according to their
shooting dates.
28
BasicGuide_E.fm Page 29 Friday, December 8, 2006 6:23 PM
Downloading Images to a Computer
The following window will appear when you establish a connection
between the camera and computer. If it fails to appear, click the [Canon
CameraWindow] icon on the Dock (the bar which appears at the bottom
of the desktop).
1. Download the images.
• Download the images using the camera or the computer.
• By default, the downloaded images are saved into the [Pictures]
folder.
Downloading Images Using a Computer.
By default, all images that have yet to be
downloaded will download.
You can set the type of image to
download and the destination folder.
Thumbnails (small versions) of the
downloaded images will display in the
ImageBrowser Browser Window. By
default, the downloaded images are
saved into folders according to their
shooting dates.
Downloading Images to a Computer
Downloading Images Using the Camera
(p. 30).
29
Downloading Images Using the Camera
(Direct Transfer)
Use this method to download images using camera operations.
Install the supplied software and adjust the computer settings before
using this method for the first time (p. 26).
All Images
Transfers and saves all images to the computer.
Transfers and saves to the computer only the
images that have not been previously
transferred.
Transfers and saves to the computer only the
DPOF Trans.
images with DPOF Transfer Order settings
Images
(Advanced Guide, p. 107).
Transfers and saves single images to the
Select & Transfer
computer as you view and select them.
Transfers and saves single images to the
computer as you view and select them. The
Wallpaper
transferred images as the background on the
computer desktop.
New Images
1. Confirm that the Direct Transfer
menu is displayed on the camera's
LCD monitor.
• The
button will light blue.
• Press the MENU button if the Direct
Transfer menu fails to appear.
Direct Transfer Menu
„ All Images/New Images/DPOF Trans. Images
2. Select , or and press the
button.
• The images will download. The
button will blink blue while downloading
is in progress. The display will return to
the Direct Transfer menu when the
download is complete.
• To cancel the download, press the FUNC./SET button.
30
„ Select & Transfer/Wallpaper
2. Select or and press the
button (or the
FUNC./SET button).
3. Select images to download and press the
button
(or the FUNC./SET button).
Only JPEG images can be downloaded as wallpaper for a
computer. On the Windows platform, the files are
automatically created as BMP images.
The option selected with the
button is retained even
when the camera's power is turned off.
The previous setting will be in effect the next time the Direct
Transfer menu is displayed. The image selection screen will
appear directly when the [Select & Transfer] or the
[Wallpaper] option was last selected.
Downloading Images to a Computer
• The images will download. The
button will blink blue while downloading
is in progress.
• Images can also be selected during
index playback (Advanced Guide p. 77).
• Press the MENU button to return to the
Direct Transfer menu.
31
MEMO
32
Safety Precautions
Be sure to read, understand and follow the safety precautions below
when using the camera, in order to prevent injury, burns or electrical
shock to yourself and others.
Be sure to also read the safety precautions listed in the
Advanced Camera User Guide.
Warnings
• Do not trigger the flash in close proximity to human or animal eyes.
• Store this equipment out of the reach of children and infants.
• Avoid dropping or subjecting the camera to severe impacts. Do not
touch the flash portion of the camera if it has been damaged.
• Stop operating the equipment immediately if it emits smoke or noxious fumes.
• Do not handle the power cord if your hands are wet.
• Use only recommended batteries and accessories.
• The battery charger and compact power adapter are designed for
exclusive use with your camera. Do not use it with other products or
batteries.
Caution
• Do not sit with the camera in a back pocket as it may cause the
camera to malfunction or damage the LCD monitor.