Epson PriorityFAX 2000 User guide

Phaser® 3300MFP
Multifunction Printer
Phaser 3300MFP
User Guide
®
© 2008 Xerox Corporation. All rights reserved.
This manual is provided for information purposes only. All information included herein is subject to change without notice. Xerox Corporation is not responsible
for any direct or indirect damages, arising from or related to use of this manual.
• Phaser 3300MFP is model name of Xerox Corporation.
• Xerox and Xerox logo are trademarks of Xerox Corporation.
• PCL and PCL 6 are trademarks of Hewlett-Packard company.
• Microsoft, Windows, Windows 2000, Windows XP, Windows 2003, and Windows Vista are registered trademarks of Microsoft Corporation.
• PostScript 3 is a trademark of Adobe System, Inc.
• UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.
• TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or organizations.
CONTENTS
1. Introduction
Special features ......................................................................................................................................................
Printer overview ......................................................................................................................................................
Finding more information ........................................................................................................................................
Selecting a location ................................................................................................................................................
1.1
1.2
1.4
1.4
2. System setup
Menu overview .......................................................................................................................................................
Changing the display language ..............................................................................................................................
Setting the date and time ........................................................................................................................................
Changing the default mode ....................................................................................................................................
Setting sounds ........................................................................................................................................................
Entering characters using the number keypad .......................................................................................................
Using the save modes ............................................................................................................................................
Setting print job timeout ..........................................................................................................................................
2.1
2.2
2.2
2.2
2.3
2.3
2.4
2.4
3. Software overview
Supplied software ................................................................................................................................................... 3.1
Printer driver features ............................................................................................................................................. 3.2
System requirements .............................................................................................................................................. 3.2
4. Network setup
Introduction .............................................................................................................................................................
Supported operating systems .................................................................................................................................
Locating the 3300MFP IP Address .........................................................................................................................
Accessing CentreWare Internet Services (CWIS) ..................................................................................................
Configuring TCP/IP .................................................................................................................................................
Configuring EtherTalk .............................................................................................................................................
Configuring 802.1x .................................................................................................................................................
Setting Ethernet speed ...........................................................................................................................................
Restoring the network configuration .......................................................................................................................
Printing a network configuration page ....................................................................................................................
4.1
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
5. Loading originals and print media
Loading originals ....................................................................................................................................................
Selecting print media ..............................................................................................................................................
Loading paper .........................................................................................................................................................
Setting the paper size and type ..............................................................................................................................
Selecting an output location ...................................................................................................................................
5.1
5.2
5.5
5.8
5.8
6. Copying
Selecting the paper tray ..........................................................................................................................................
Copying ..................................................................................................................................................................
Changing the settings for each copy ......................................................................................................................
Changing the default copy settings ........................................................................................................................
Using special copy features ....................................................................................................................................
Copying on both sides of paper ..............................................................................................................................
Setting copy timeout ...............................................................................................................................................
7. Basic printing
6.1
6.1
6.1
6.2
6.2
6.4
6.4
Printing a document ................................................................................................................................................ 7.1
Canceling a print job ............................................................................................................................................... 7.1
8. Scanning
Scanning basics ...................................................................................................................................................... 8.1
Scanning to an application using a local connection ............................................................................................... 8.1
Scanning using a network connection ..................................................................................................................... 8.2
Changing the settings for each scan job ................................................................................................................. 8.5
Changing the default scan settings ......................................................................................................................... 8.5
Setting up Address Book ......................................................................................................................................... 8.5
9. Faxing
Setting the fax header ............................................................................................................................................. 9.1
Adjusting the document settings ............................................................................................................................. 9.1
Sending a fax automatically .................................................................................................................................... 9.2
Sending a fax manually ........................................................................................................................................... 9.2
Confirming a transmission ....................................................................................................................................... 9.3
Automatic redialing .................................................................................................................................................. 9.3
Redialing the last number ....................................................................................................................................... 9.3
Selecting the paper tray .......................................................................................................................................... 9.3
Changing receiving modes ...................................................................................................................................... 9.3
Receiving automatically in Fax mode ..................................................................................................................... 9.4
Receiving manually in Tel mode ............................................................................................................................. 9.4
Receiving manually using an extension telephone ................................................................................................. 9.4
Receiving automatically in Ans/Fax mode .............................................................................................................. 9.4
Receiving faxes using DRPD mode ........................................................................................................................ 9.4
Receiving in secure receiving mode ....................................................................................................................... 9.5
Receiving faxes in memory ..................................................................................................................................... 9.5
Printing received faxes on both sides of paper ....................................................................................................... 9.6
Sending a fax to multiple destinations ..................................................................................................................... 9.6
Sending a delayed fax ............................................................................................................................................. 9.6
Sending a priority fax .............................................................................................................................................. 9.7
Forwarding faxes ..................................................................................................................................................... 9.7
Sending a Fax from a PC ........................................................................................................................................ 9.8
10. Fax setup
Changing the fax setup options ............................................................................................................................. 10.1
Changing the default document settings ............................................................................................................... 10.2
Printing sent fax report automatically .................................................................................................................... 10.2
Setting up Phone Book ......................................................................................................................................... 10.2
11. Using USB flash memory
About USB memory .............................................................................................................................................. 11.1
Plugging in a USB memory device ........................................................................................................................ 11.1
Scanning to a USB memory device ...................................................................................................................... 11.1
Printing from a USB memory device ..................................................................................................................... 11.2
Backing up data .................................................................................................................................................... 11.3
Managing USB memory ........................................................................................................................................ 11.3
12. Ordering supplies and accessories
Print cartridges ...................................................................................................................................................... 12.1
Accessories ........................................................................................................................................................... 12.1
How to purchase ................................................................................................................................................... 12.1
13. Maintenance
Printing reports ...................................................................................................................................................... 13.1
Clearing memory ................................................................................................................................................... 13.2
Cleaning your machine ......................................................................................................................................... 13.2
Maintaining the print cartridge ............................................................................................................................... 13.3
Maintenance Parts ................................................................................................................................................ 13.6
Managing your machine from the website ............................................................................................................ 13.7
Checking the machine’s serial number ................................................................................................................. 13.8
14. Troubleshooting
Clearing document jams ....................................................................................................................................... 14.1
Clearing paper jams .............................................................................................................................................. 14.2
Understanding display messages ......................................................................................................................... 14.7
Print cartridge-related messages ........................................................................................................................ 14.10
Solving other problems ....................................................................................................................................... 14.11
15. Installing accessories
Precautions when installing accessories ............................................................................................................... 15.1
Installing a memory DIMM .................................................................................................................................... 15.1
16. Specifications
General specifications ........................................................................................................................................... 16.1
Printer specifications ............................................................................................................................................. 16.1
Scanner and copier specifications ........................................................................................................................ 16.2
Facsimile specifications ........................................................................................................................................ 16.2
Safety
Operational Safety Information
Your Xerox equipment and supplies have been designed and tested
to meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.
Read these safety notes carefully before using this product to
ensure you operate the equipment safely.
Your Xerox product and supplies have been designed and tested to
meet strict safety requirements. These include safety Agency
approval, and compliance to established environmental standards.
Please read the following instructions carefully before operating the
product and refer to them as needed to ensure the continued safe
operation of your product.
To ensure the continued safe operation of your Xerox equipment,
follow these safety guidelines at all times:
Do These:
The safety testing and performance of this product have been
verified using Xerox materials only.
•
Always follow all warnings and instructions that are marked on
or supplied with the equipment.
•
Before cleaning this product, unplug the product from the
electrical outlet. Always use materials specifically designated for
this product, the use of other materials may result in poor
performance and create a hazardous situation.
WARNING: This WARNING mark alerts users to the
possibility of personal injury.
WARNING: This WARNING mark alerts users to
WARNING: Do not use aerosol cleaners. Aerosol
heated surfaces.
cleaners can be explosive or flammable when used
on electromechanical equipment.
CAUTION: This symbol indicates a Laser is being
used in the equipment and alerts the user to refer to
the appropriate safety information.
WARNING: This product must be connected to a
protective earth circuit.
Operator Accessible Areas
This equipment has been designed to provide operator access to
safe areas only. Operator access to hazardous areas is restricted
using covers or guards, which require a tool to enable removal.
Never remove these covers or guards.
•
Always exercise care when moving or relocating equipment.
Please contact your local Xerox Service Department to arrange
relocation of the copier to a location outside of your building.
•
Always locate the machine on a solid support surface (not on
plush carpet) that has adequate strength to support the weight
of the machine.
•
Always locate the machine in an area that has adequate
ventilation and room for servicing.
•
Always unplug this equipment from the electrical outlet before
cleaning.
NOTE: Your Xerox machine is equipped with an energy saving
device to conserve power when the machine is not in use. The
machine may be left on continuously.
Maintenance Information
1. Any operator product maintenance procedures will be
described in the user documentation supplied with the product.
CAUTION: The metallic surfaces in the fuser area
2. Do not carry out any maintenance on this product which is not
are hot. Please use caution when removing paper
jams from this area and avoid touching any metallic
surfaces.
described in the customer documentation
WARNING: Do not use aerosol cleaners. Aerosol
cleaners can be explosive or flammable when used
on electromechanical equipment.
Do Not Do These:
3. Use supplies and cleaning materials only as directed in the
Operator section of this manual.
4. Do not remove covers or guards that are fastened with screws.
There are no parts behind these covers that you can maintain
or service.
i
•
Never use a ground adapter plug to connect the equipment to a
power outlet that lacks a ground connection terminal.
•
Never attempt any maintenance function that is not specifically
described in this documentation.
•
Never obstruct ventilation openings. They are provided to
prevent overheating.
Electrical Supply
•
Never remove covers or guards that are fastened with screws.
There are no operator serviceable areas within these covers.
1. This product shall be operated from the type of electrical supply
•
Never locate the machine near a radiator or any other heat
source.
•
Never push objects of any kind into the ventilation openings.
•
Never override or "cheat" any of the electrical or mechanical
interlock devices.
•
Never place this equipment where people might step on or trip
on the power cord.
•
This equipment should not be placed in a room unless proper
ventilation is provided. Please contact your local Authorized
dealer for further information.
indicted on the product's data plate label. If you are not sure
that your electrical supply meets the requirements, please
consult a licensed electrician for advice.
WARNING: This equipment must be connected to a
protective earth circuit. This equipment is supplied
with a plug that has a protective earth pin. This plug
will only fit into an earthed electrical outlet. This is a
safety feature. If you are unable to insert the plug into
the outlet, contact a licensed electrician to replace
the outlet.
2. Always connect equipment to a correctly grounded power
outlet. If in doubt, have the outlet checked by a qualified
electrician.
Electrical Safety Information
Disconnect Device
1. The power receptacle for the machine must meet the
The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To remove
all electrical power from the equipment, disconnect the power cable
from the electrical outlet.
requirements stated on the data plate on the rear of the
machine. If you are not sure that your electrical supply meets
the requirements, please consult your local power company or
an electrician for advice.
2. The socket outlet shall be installed near the equipment and
Emergency Power Off
shall be easily accessible.
3. Use the power cable that is supplied with your machine. Do not
If any of the following conditions occur, turn off the machine
immediately and disconnect the power cable(s) from the electrical
outlet(s). Contact anauthorized Xerox Service Representative to
correct the problem:
use an extension cord or remove or modify the power cord
plug.
4. Plug the power cable directly into a correctly grounded
The equipment emits unusual odours or makes unusual noises. The
power cable is damaged or frayed. A wall panel circuit breaker, fuse,
or other safety device has been tripped. Liquid is spilled into the
machine. The machine is exposed to water. Any part of the machine
is damaged.
electrical outlet. If you are not sure whether or not an outlet is
correctly grounded, consult an electrician.
5. Do not use an adapter to connect any Xerox equipment to an
electrical outlet that lacks a ground connection terminal.
6. Do not place this equipment where people might step or trip on
WARNING: Risk of explosion if battery is replaced
the power cable.
by an incorrect type. Dispose of used batteries
according to the instruction.
7. Do not place objects on the power cable.
8. Do not override or disable electrical or mechanical interlock
devices.
9. Do not push objects into slots or openings on the machine.
Electrical shock or fire may result.
10. Do not obstruct ventilation openings. These openings are used
to provide proper cooling to the Xerox machine.
ii
Quality Standards
Ozone Safety Information
The product is manufactured under a registered ISO 9002 Quality
system.
This product will produce ozone during normal operation. The ozone
produced is heavier than air and is dependent on copy volume.
Providing the correct environmental parameters as specified in the
Xerox installation procedure will ensure that the concentration levels
meet safe limits.
If you need additional safety information concerning this XEROX
product or XEROX supplied materials you may call the following
number:
EUROPE: +44 (0) 1707 353434
USA/CANADA: 1 800 928 6571
If you need additional information about ozone, please request the
Xerox publication Ozone by calling 1-800-828-6571 in the United
States and Canada. In other markets please contact your authorized
local dealer or Service Provider.
Safety Standards
EUROPE: This XEROX product is certified by the following Agency
using the Safety Standards listed.
For Consumables
•
Agency: TUV Rheinland
•
•
Standard: IEC60950-1, 2001
Store all consumables in accordance with the instructions given
on the package or container.
•
•
Keep all consumables away from the reach of children.
Never throw print cartridges or toner containers into an open
flame.
Cartridges: When handing cartridges, for example ink, fuser,
etc, avoid skin or eye contact. Eye contact can cause irritation
and inflammation. Do not attempt to disassemble the cartridge.
This can increase the risk of skin or eye contact.
USA/CANADA: This XEROX product is certified by the following
Agency using the Safety Standards listed.
•
Agency: UNDERWRITERS LABORATORIES
•
Standard: UL60950-1, 2003 Edition. Certification is based on
reciprocity agreements, which include requirements for
Canada.
•
Product Safety Certification
Laser Safety Information
This product is certified by the following Agency using the Safety
standards listed.
CAUTION: Use of controls, adjustments or
performance of procedure other than those specified
herein may result in hazardous light exposure.
Agency
With specific regard to laser safety, the equipment complies with
performance standards for laser product set by government,
national and international agencies as a Class 1 laser product. It
does not emit hazardous light, as the beam is totally enclosed during
all phases of customer operation and maintenance.
Standard
Underwriters Laboratories Inc.
UL60950-1st Edition (2003) (USA/
Canada)
SEMKO
IEC60950-1st Edition 1 (2001)
This product has been manufactured under a registered ISO 9001
Quality system.
iii
Regulatory Information
EMC Information
FCC Notices For The USA
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
CE Mark
The CE mark applied to this product, symbolizes XEROX's
declaration of conformity with the following applicable European
Union Directives, as of the dates indicated:
December 12, 2006:
Council Directive 2006/95/EC as amended. Approximation of the
laws of the member states related to low voltage equipment.
December 15, 2004:
Council Directive 2004/108/EC as amended. Approximation of the
laws of the member states related to electromagnetic compatibility.
March 9, 1999:
Council Directive 99/5/EC, on radio equipment and
telecommunications terminal equipment and the mutual recognition
of the conformity.
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
A full declaration of conformity, defining the relevant directives and
referenced standards, can be obtained from your XEROX Limited
representative.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
WARNING: In order to allow this equipment to
Changes or modifications to this equipment not specifically
approved by the Xerox Corporation may void the user's authority to
operate this equipment.
operate in proximity to Industrial Scientific and
Medical (ISM) equipment, the external radiation from
the ISM equipment may have to be limited or special
mitigation measures taken.
EME Compliance for Canada
This Class "B" digital apparatus complies with Canadian ICES-003.
NOTE: Changes or modifications to this equipment not specifically
Cet appareil numerique de la classe "B" est conforme a la norme
NMB-003 du Canada.
approved by the Xerox Corporation may void the user’s authority to
operate this equipment.
WARNING: Shielded cables must be used with this
WARNING: Shielded cables must be used with this
equipment to maintain compliance with FCC
regulations.
equipment to maintain compliance with Council
Directive 2004/108/EC.
iv
Illegal Copying
•
Copyrighted material (unless permission of the copyright owner
has been obtained or the copying falls within the “fair use” or
library reproduction provisions of the copyright law). Further
information of these provisions may be obtained from the
Copyright Office, Library of Congress, Washington, DC 20559
(circular R21).
•
Certificates of Citizenship or Naturalization (foreign
naturalization certificates may be photographed).
•
Passports (foreign passports may be photographed).
Silver Certificates
•
Immigration papers.
United States Bonds
•
Draft Registration cards.
Federal Reserve Notes
•
Selective Service Induction papers which bear any of the
following information:
Congress, by statute, has forbidden the copying of the following
subjects under certain circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making such copies.
•
Obligations or Securities of the United States Government, such
as:
Certificates of Indebtedness
Coupons from Bonds
Certificates of Deposit
Registrant’s earnings or income
National Bank currency
Federal Reserve Bank Notes
Registrant’s dependency status
Gold Certificates
Registrant’s court record
Registrant’s previous military service
Treasure Notes
Registrant’s physical or mental condition
Fractional Notes
Paper money
NOTE: Exception: US Army and Navy discharge certificates may
Bonds and obligations of certain agencies of the government,
such as FHA
be photographed.
•
Bonds (US Savings Bonds may be photographed only for
publicity purposes in connection with the campaign for the
sale of such bonds.)
Internal Revenue Stamps (If it is necessary to copy a legal
document on which there is a cancelled revenue stamp, this
may be done provided the reproduction of the document is
performed for lawful purposes.)
WARNING: Copying of the following is also
prohibited in certain states: automobile licences,
driver’s licenses, and automobile Certificates of
Title. This list is not all-inclusive. In case of doubt,
consult your attorney.
Postage Stamps, canceled or uncanceled (For philatelic
purposes, postage stamps may be photographed provided the
reproduction is black and white and less than 3/4 or more than
11/2 times the linear dimensions of the original).
Postal Money Orders
Bills, checks, or drafts for money drawn by or on authorized
officers of the United States
Stamps and other representatives of value, of whatever
denomination, which may be or have been issued under any
Act of Congress
•
Adjusted compensation Certificates for veterans of the World
Wars.
•
Obligations or Securities of any foreign government, bank, or
corporation.
Badges, identification cards, passes or insignias carried by
military or Naval personnel, or by members of the various
Federal Departments and Bureaus, such as the FBI and
Treasury (unless the photograph is ordered by the head of such
Department or Bureau).
v
Cyprus
Hungary
Lithuania
Slovakia
Czech Republic
Italy
Malta
Slovenia
Estonia
Latvia
Poland
Spain
For Fax Function
without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
USA
If this Xerox equipment causes harm to the telephone network, the
Telephone Company will notify you in advance that temporary
discontinuance of service may be required. If advance notice isn't
practical, the Telephone Company will notify the customer as soon
as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
FAX Send Header Requirements:
The telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or other electronic device,
including a Fax machine, to send any message unless such
message clearly contains in a margin at the top or bottom of each
transmitted page or on the first page of the transmission, the date
and time it is sent and an identification of the business or other
entity, or other individual sending the message and the telephone
number of the sending machine or such business, other entity or
individual. (The telephone number provided may not be a 900
number or any other number for which charges exceed local or long
distance transmission charges.)
The Telephone Company may make changes in its facilities,
equipment, operations or procedures that could affect the operation
of the equipment. If this happens the Telephone Company will
provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this Xerox equipment, for repair or
warranty information, please contact the appropriate service center;
details of which are displayed either on the machine or contained
within the user guide. If the equipment is causing harm to the
telephone network, the Telephone Company may request that you
disconnect the equipment until the problem is resolved.
In order to program this information into your FAX machine refer to
Setting the Machine and follow the steps provided.
Repairs to the machine should be made only by a Xerox
representative or an authorized Xerox service agency. This applies
at any time during or after the service warranty period. If
unauthorized repair is performed, the remainder of the warranty
period is null and void. This equipment must not be used on party
lines. Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
If your office has specially wired alarm equipment connected to the
telephone line, ensure the installation of this Xerox equipment does
not disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your Telephone Company or a
qualified installer.
Data Coupler Information:
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the Administrative Council for Terminal
Attachments (ACTA). On the rear of this equipment is a label that
contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested , this number must be provided
to the Telephone Company.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
CANADA
You may safely connect the machine to the following standard
modular jack: USOC RJ-11C using the compliant telephone line
cord (with modular plugs) provided with the installation kit. See
installation instructions for details.
This product meets the applicable Industry Canada technical
specifications
NOTE: The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all of the devices does not exceed 5.
The Ringer Equivalence Number (or REN) is used to determine the
number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined
by the total RENs, contact the local Telephone Company. For
products approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
vi
OpenSSL License
give the telecommunications company cause to request the user to
disconnect the equipment.
Copyright (c) 1998-2001 The OpenSSL Project. All rights
reserved.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and internal
metallic water pipe systems, if present, are connected together. This
precaution may be particularly important in rural areas.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
CAUTION: Users should not attempt to make such
1. Redistributions of source code must retain the above copyright
connections themselves, but should contact the
appropriate electric inspection authority, or
electrician, as appropriate.
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
Europe
Radio Equipment & Telecommunications Terminal
Equipment Directive
3. All advertising materials mentioning features or use of this
software must display the following acknowledgment: "This
product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
This Xerox product has been self-certified by Xerox for panEuropean single terminal connection to the analogue public
switched telephone network (PSTN) in accordance with Directive
1999/5/EC.
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must
not be used to endorse or promote products derived from this
software without
The product has been designed to work with the national PSTNs
and compatible PBXs of the following countries:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland, United Kingdom, Iceland, Liechtenstein, Norway
5. prior written permission. For written permission, please contact
openssl-core@openssl.org.
6. Products derived from this software may not be called
"OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
7. Redistributions of any form whatsoever must retain the
In the event of problems, you should contact your local Xerox
representative in the first instance.
following acknowledgment: "This product includes software
developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)"
This product has been tested to and is compliant with TBR21 or ES
103 021-1/2/3 or ES 203 021-1/2/3, technical specifications for
terminal equipment for use on analogue-switched telephone
networks in the European Economic Area. The product may be
configured to be compatible with other country networks. Please
contact your Xerox representative if it needs to be reconnected to
another country's network.
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
NOTE: Although this product can use either loop disconnect
(pulse) or DTMF (tone) signaling it is recommended that it is set to
use DTMF signaling. DTMF signaling provides reliable and faster
call setup. Modification, connection to external control software or
to external control apparatus not authorized by Xerox, will
invalidate its certification.
vii
This product includes cryptographic software written by Eric
Young(eay@cryptsoft.com). This product includes software written
by Tim Hudson (tjh@cryptsoft.com).
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All
rights reserved.
This package is an SSL implementation written by Eric Young
(eay@cryptsoft.com). The implementation was written so as to
conform with Netscapes SSL.
The licence and distribution terms for any publically available
version or derivative of this code cannot be changed. i.e. this code
cannot simply be copied and put under another distribution licence
[including the GNU Public Licence.]
This library is free for commercial and non-commercial use as long
as the following conditions are aheared to. The following conditions
apply to all code found in this distribution, be it the RC4, RSA, lhash,
DES, etc., code; not just the SSL code. The SSL documentation
included with this distribution is covered by the same copyright
terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices
in the code are not to be removed. If this package is used in a
product, Eric Young should be given attribution as the author of the
parts of the library used. This can be in the form of a textual
message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this
software must display the following acknowledgement: "This
product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)" The word 'cryptographic' can be left out if
the rouines from the library being used are not cryptographic
related.
4. If you include any Windows specific code (or a derivative
thereof) from the apps directory (application code) you must
include an acknowledgement: "This product includes software
written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
viii
Environmental Compliance
Product Recycling and Disposal
USA
European Union
Energy Star
Professional/Business Environment
As an ENERGY STAR® partner, Xerox Corporation
has determined that (the basic configuration of) this
product meets the ENERGY STAR guidelines for
energy efficiency.
Application of this symbol on your equipment is
confirmation that you must dispose of this equipment
in compliance with agreed national procedures.
In accordance with European legislation, end of life
electrical and electronic equipment subject to disposal
must be managed within agreed procedures.
The ENERGY STAR and ENERGY STAR MARK
are registered United States trademarks.
The ENERGY STAR Office Equipment Program is
a team effort between U.S., European Union and
Japanese governments and the office equipment
industry to promote energy-efficient copiers,
printers, fax, multifunction machine, personal
computers, and monitors. Reducing product energy
consumption helps combat smog, acid rain and
long-term changes to the climate by decreasing the
emissions that result from generating electricity.
Domestic/Household Environment
Application of this symbol on your equipment is
confirmation that you should not dispose of the
equipment in the normal household waste stream. In
accordance with European legislation, end of life
electrical and electronic equipment subject to disposal
must be segregated from household waste. Private
households within EU member states may return
used electrical and electronic equipment to
designated collection facilities free of charge. Please
contact your local disposal authority for information. In
some member states, when you purchase new
equipment, your local retailer may be required to take
back your old equipment free of charge. Please ask
you retailer for information.
Xerox ENERGY STAR equipment is preset at the
factory. Your machine will be delivered with the
timer for switching to Power Save Mode from the
last copy/print out, set at 30 minutes. A more
detailed description of this feature can be found in
the Machine Setup Section of this guide.
Prior to disposal, please contact your local dealer or
Xerox representative for end of life takeback
information.
North America
Xerox operates a worldwide equipment take back and reuse/recycle
program. Contact your Xerox sales representative (1-800-ASKXEROX) to determine whether this Xerox product is part of the
program. For more information about Xerox environmental
programs, visit www.xerox.com/environment.
If you are managing the disposal of your Xerox product, please note
that the product may contain lead, Perchlorate and other materials
whose disposal may be regulated due to environmental
considerations. The presence of these materials is fully consistent
with global regulations applicable at the time that the product was
placed on the market. For recycling and disposal information,
ix
contact your local authorities. In the United States, you may also
refer to the Electronic Industries Alliance web site: www.eiae.org.
WARNING: Perchlorate Material - This product may
contain one or more Perchlorate-containing devices,
such as batteries. Special handling may apply,
please see www.dtsc.ca.gov/hazardouswaste/
perchlorate/.
Others Countries
Please contact your local waste authorities and request disposal
guidance.
EH&S Contact Information
For more information on Environment, Health and Safety in relation
to this Xerox product and supplies, please contact the following
customer help lines:
•
USA: 1-800 828-6571
•
Canada: 1-800 828-6571
•
Europe: +44 1707 353 434.
•
Product Safety information for US
www.xerox.com/about-xerox/environment/enus.html
•
Product Safety information for EU
www.xerox.com/about-xerox/environment/eneu.html
x
1 Introduction
Expand your machine’s capacity
• The Phaser 3300MFP has 96 MB of memory which
can be expanded to 320 MB.
• You can add a 250-sheet optional tray 2 to your
machine. This tray lets you add paper to the machine
less often.
• Zoran IPS Emulation* compatible with PostScript 3
(PS) enables PS printing.
Thank you for purchasing this Xerox multifunctional product. Your
machine provides printing, copying, scanning, and faxing functions.
This chapter includes:
•
Special features
•
Printer overview
•
Finding more information
•
Selecting a location
* Zoran IPS Emulation compatible with PostScript 3
• © Copyright 1995-2005, Zoran Corporation. All
rights reserved. Zoran, the Zoran logo, IPS/PS3, and
OneImage are trademarks of Zoran Corporation.
* 136 PS3 fonts
Contains UFST and MicroType from Monotype Imaging Inc.
Special features
Your new machine is equipped with special features that improve print
quality. You can:
Print in various environments
•
•
•
•
Print with excellent quality and speed
• You can print with a resolution of up to 1200 dpi [Best].
See the Software Section.
• Your machine prints A4-sized paper at up to 28 ppma
and letter-sized paper at up to 30 ppm.
• For duplex printing, your machine prints A4-sized
paper at up to 19 ipmb and letter-sized paper at up to
21 ipm.
You can print with Windows 2000/XP/2003/Vista.
Your machine is compatible with a variety of Linux systems.
Your machine is compatible with a variety of Macintosh systems.
Your machine comes with both USB and ethernet interfaces.
Use USB flash memory devices
If you have a USB memory device, you can use it in various ways with
your machine.
• You can scan documents and save them to the device.
• You can directly print data stored to the device.
• You can back up data and restore backup files to the machine’s
memory.
Handle paper flexibly
• The multi-purpose tray supports letterhead,
envelopes, labels, transparencies, custom-sized
media, postcards, and heavy paper. The multipurpose tray holds up to 50 sheets of plain paper.
• The 250-sheet tray 1 and 250-sheet optional tray 2
support plain paper in various sizes.
250
Machine features
The table below lists a general overview of features supported by your
machine.
Create professional documents
• Print Watermarks. You can customize your documents
with words, such as “Confidential”. See the Software
Section.
• Print Posters. The text and pictures of each page of
your document are magnified and printed across the
sheet of paper and can then be taped together to form
a poster. See the Software Section.
(I: Installed, O: Option, NA: Not Available)
Features
Save time and money
• You can print multiple pages on one single sheet of paper to save
paper.
• You can use preprinted forms and letterhead with plain paper. See the
Software Section.
• This machine automatically conserves electricity by substantially
reducing power consumption when not in use.
Phaser 3300MFP
USB 2.0
I
USB Memory
I
PostScript Emulation
I
Network Interface
I
(Ethernet 10/100 Base TX)
Duplex printing1
1. Printing on both sides of paper.
a. pages per minute
b. images per minute
1.1
<Introduction>
I
Printer overview
These are the main components of your machine:
Front view
Rear view
* The figure above shows Phaser
3300MFP with all available accessories.
* The figure above shows Phaser 3300MFP
with all available accessories.
1
control board cover
6
extension telephone
socket (EXT)
2
network port
7
duplex unita
optional tray 2
3
USB port
8
power receptacle
12
multi-purpose tray
4
power switch
13
output support
optional tray 2 cable
connector
9
scanner lid
5
document output tray
14
USB memory port
5
10
rear cover
6
control panel
15
multi-purpose tray
extension
telephone line socket
(LINE)a
7
output tray
16
multi-purpose tray paper
width guides
8
front cover
17
scanner glass
9
paper level indicator
18
print cartridge
1
ADF (automatic
document feeder)
10
2
document width guides
11
3
document input tray
4
tray 1
1.2
<Introduction>
Control panel overview
1
Speed buttons: Allows you to store frequently-dialed fax numbers
and email addresses and enter them with the touch of a few
buttons.
13
Exit: Sends you back to the upper menu level.
2
16-30: Allows you to shift the speed buttons to access numbers 16
through 30.
14
Lighten/Darken: Adjusts the document brightness for the current
copy job.
3
Address Book: Allows you to store frequently used fax numbers in
memory or search for stored fax numbers or email addresses. Also
allows you to print an Address Book/Phone Book list.
15
Original Type: Selects the document type for the current copy job.
4
Resolution: Adjusts the document resolution for the current fax job.
16
Reduce/Enlarge: Makes a copy smaller or larger than the original.
5
Redial/Pause: In Standby mode, redials the last number, or in Edit
mode, inserts a pause into a fax number.
17
USB Print: Allows you to directly print files stored on a USB
Memory device when it is inserted into the USB memory port on
the front of your machine.
6
Fax: Activates Fax mode.
18
Duplex: Allows you to print documents on both sides of the paper.
7
Copy: Activates Copy mode.
19
Toner Saver: Allows you to save on toner by using less toner in
printing.
8
Scan: Activates Scan mode.
20
Number keypad: dials a number or enters alphanumeric characters.
9
Display: Shows the current status and prompts during an operation.
21
Manual Dial: Engages the telephone line.
10
Menu: Enters Menu mode and scrolls through the available menus.
22
Stop/Clear: Stops an operation at any time. In Standby mode,
clears/cancels the copy options, such as the darkness, the
document type setting, the copy size, and the number of copies.
11
Scroll buttons: Scroll through the options available in the selected
menu, and increase or decrease values.
23
Start: Starts a job.
12
Enter: Confirms the selection on the screen.
1.3
<Introduction>
Finding more information
Selecting a location
You can find information for setting up and using your machine from the
following resources, either printed or onscreen.
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
Quick Install
Guide
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.
Provides information on setting up your
machine and, therefore, be sure to follow
the instructions in the guide to get the
machine ready.
Clearance space
• Front: 482,6 mm (enough space so that the paper tray can be
removed)
• Back: 100 mm (enough space for ventilation)
• Right: 100 mm (enough space for ventilation)
Online User
Guide
• Left: 100 mm (enough space for ventilation)
Provides you with step-by-step
instructions for using your machine’s full
features, and contains information for
maintaining your machine,
troubleshooting, and installing
accessories.
This user guide also contains the Software
Section providing you with information on
how to print documents with your machine
on various operating systems, and how to
use the supplied software utilities.
Note
You can access the user guides in
other languages from the Manual
folder on the printer software
CD.
Printer Driver
Help
Provides you with help information on
printer driver properties and instructions
for setting up the properties for printing. To
access a printer driver help screen, click
Help from the printer properties dialog
box.
website
If you have Internet access, you can get
help, support, printer drivers, manuals,
and order information from the Xerox
website, www.xerox.com/support.
1.4
<Introduction>
2 System setup
This chapter gives you an overview of menus available on your machine
and step-by-step instructions for setting up the machine’s systems.
This chapter includes:
•
Menu overview
•
Changing the display language
•
Setting the date and time
•
Changing the default mode
•
Setting sounds
•
Entering characters using the number keypad
•
Using the save modes
•
Setting print job timeout
Menu overview
The control panel provides access to various menus to set up the
machine or use the machine’s functions. These menus can be accessed
by pressing Menu. Refer to the following diagram. Menus available in
Fax, Copy, or Scan mode vary.
Fax Feature
Fax Setup
Copy Feature
Copy Setup
Scan Feature
Darkness
Multi Send
Delay Send
Priority Send
Send Forward
Rcv. Forward
Secure Receive
Add Page
Cancel Job
Sending
Redial Times
Redial Term
Prefix Dial
ECM Mode
Sent Report
Image TCR
Dial Mode
Receiving
Receive Mode
Ring to Answer
Stamp Rcv Name
Rcv Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Mode
Change Default
Resolution
Darkness
Auto Report
Copy Collation
2-Up
4-Up
ID Copy
Poster Copy
Clone Copy
Erase Bkgd.
Change Default
Copies
Reduce/Enlarge
Darkness
Original Type
USB Memory
Scan Size
Original Type
Resolution
Scan Color
Scan Format
E-mail
Scan Size
Original Type
Resolution
Scan Color
FTP
Scan Size
Original Type
Resolution
Scan Color
SMB
Scan Size
Original Type
Resolution
Scan Color
System Setup
Scan Setup
Machine Setup
Machine ID
Machine Fax No.
Date & Time
Clock Mode
Language
Default Mode
Power Save
Scan PWR Save
Timeout
NetScanTimeout
Job Timeout
Import Setting
Export Setting
Change Default
USB Memory
E-mail
FTP
SMB
Network
TCP/IP
EtherTalk
Ethernet Speed
Clear Setting
Network Info.
System Setup
(continued)
Paper Setup
Paper Size
Paper Type
Paper Source
Sound/Volume
Key Sound
Alarm Sound
Speaker
Ringer
Report
Maintenance
Clean Drum
Ignore Toner
CLR Empty Msg.
Supplies Life
Serial Number
Clear Setting
2.1
<System setup>
6
Changing the display language
Press Enter to save the time and date.
When you enter a wrong number, Out of Range appears and the
machine does not proceed to the next step. If this happens, simply
reenter the correct number.
To change the language that appears on the control panel, follow these
steps:
7
Press Stop/Clear to return to Standby mode.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Language appears and press Enter.
You can set your machine to display the current time using either a
12-hour or 24-hour format.
4
Press the Scroll buttons until the language you want appears and
press Enter.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
5
Press Stop/Clear to return to Standby mode.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Clock Mode appears and press
Enter.
4
Press the Scroll buttons to select the other mode and press Enter.
5
Press Stop/Clear to return to Standby mode.
Changing the clock mode
Setting the date and time
The current date and time are shown on the display when your machine
is on and ready to work. For the Phaser 3300MFP, all of your faxes will
have the date and time printed on them.
Note
Changing the default mode
If power to the machine is cut off, you need to reset the correct
time and date once the power has been restored.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Date & Time appears and press
Enter.
4
Enter the correct time and date using the number keypad.
Month
Day
Year
Hour
Minute
Your machine is preset to Fax mode. You can switch this default mode
between Fax mode and Copy mode.
=
=
=
=
01 to 12
01 to 31
requires four digits
01 to 12 (12-hour mode)
00 to 23 (24-hour mode)
= 00 to 59
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Default Mode appears and press
Enter.
4
Press the Scroll buttons until the default mode you want appears
and press Enter.
5
Press Stop/Clear to return to Standby mode.
Note
The date format may differ from country to country.
You can also use the Scroll buttons to move the cursor under the
digit you want to correct and enter a new number.
5
To select AM or PM for 12-hour format, press the
any number button.
or
button or
When the cursor is not under the AM or PM indicator, pressing the
or
button immediately moves the cursor to the indicator.
You can change the clock mode to 24-hour format (e.g. 01:00 PM as
13:00). For details, see the next section.
2.2
<System setup>
Setting sounds
Entering characters using the number keypad
You can control the following sounds:
As you perform various tasks, you may need to enter names and
numbers. For example, when you set up your machine, you enter your
name or your company’s name, and the fax number. When you store fax
numbers or email addresses in memory, you may also enter the
corresponding names.
• Key Sound: Turns the key sound on or off. With this option set to On,
a tone sounds each time a key is pressed.
• Alarm Sound: Turns the alarm sound on or off. With this option set to
On, an alarm tone sounds when an error occurs or fax communication
ends.
Entering alphanumeric characters
• Speaker: Turns on or off the sounds from the telephone line through
the speaker, such as a dial tone or a fax tone. With this option set to
Comm. which means “Common,” the speaker is on until the remote
machine answers.
1
You can adjust the volume level using Manual Dial.
For example, to enter the letter O, press 6, labeled with MNO.
• Ringer: Adjusts the ringer volume. For the ringer volume, you can
select Off, Low, Mid, and High.
Each time you press 6, the display shows a different letter, M, N, O,
and finally 6.
You can enter special characters, such as space, plus sign, and etc.
For details, see the below section.
Speaker, ringer, key sound, and alarm sound
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Sound/Volume appears and press
Enter.
3
Press the Scroll buttons until the sound option you want appears
and press Enter.
4
Press the Scroll buttons until the desired status or volume for the
sound you have selected appears and press Enter.
5
If necessary, repeat steps 3 through 5 to set other sounds.
6
Press Stop/Clear to return to Standby mode.
2
Press Manual Dial. A dial tone sounds from the speaker.
2
Press the Scroll buttons until you hear the volume you want.
3
Press Manual Dial to save the change and return to Standby mode.
To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the cursor by
pressing the right Scroll button and then press the button labeled
with the letter you want. The cursor will move to the right and the
next letter will appear on the display.
You can enter a space by pressing 1 twice.
3
When you have finished entering letters, press Enter.
Keypad letters and numbers
Key
Speaker volume
1
When you are prompted to enter a letter, locate the button labeled
with the character you want. Press the button until the correct letter
appears on the display.
Note
You can adjust the speaker volume only when the telephone
line is connected.
2.3
Assigned numbers, letters, or characters
1
1
Space
2
A
B
C
a
3
D
E
F
d e
4
G
H I g
5
J
K L j
6
M
7
P Q R S p q
8
T
9
W X Y Z w x
0
+
<System setup>
b c 2
-
V
, .
3
h i
k l
N O m n
U
f
t
4
5
o 6
r s 7
u v 8
‘
y z 9
/ * #
&
@
0
Correcting numbers or names
Scan Power Save mode
If you make a mistake while entering a number or name, press the left
Scroll button to delete the last digit or character. Then enter the correct
number or character.
Scan Power Save mode allows you to save power by turning off the scan
lamp. The scan lamp under the scanner glass automatically turns off
when it is not in actual use to reduce power consumption and extend the
life of the lamp. The lamp automatically wakes up after some warm-up
time when you start scanning.
Inserting a pause
You can set the length of time for which the scan lamp waits after a scan
job is completed before it switches to the power save mode.
With some telephone systems, you must dial an access code (9, for
example) and listen for a second dial tone. In such cases, you must insert
a pause in the telephone number. You can insert a pause while you are
setting up speed buttons or speed dial numbers.
To insert a pause, press Redial/Pause at the appropriate place while
entering the telephone number. A - appears on the display at the
corresponding location.
Using the save modes
Toner Save mode
Toner Save mode allows your machine to use less toner on each page.
Activating this mode extends the life of the print cartridge beyond what
one would experience in the normal mode, but it reduces print quality.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Scan PWR Save appears and press
Enter.
4
Press the Scroll buttons until the time setting you want appears and
press Enter.
5
Press Stop/Clear to return to Standby mode.
Setting print job timeout
You can set the amount of time a single print job is active before it must
print.
To turn this mode on or off, press Toner Saver.
Note
The machine handles incoming data as a single job if it comes in within
the specified time. When an error occurs while processing data from the
computer and the data flow stops, the machine waits the specified time
and then cancels printing if data flow does not resume.
When PC-printing, you can also turn on or off Toner Save mode
in the printer properties. See the Software Section.
Power Save mode
1
Power Save mode allows your machine to reduce power consumption
when it is not in actual use. You can turn this mode on and select a length
of time for which the machine waits after a job is printed before it switches
to a reduced power state.
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Job Timeout appears and press
Enter.
4
Press the Scroll buttons until the time setting you want appears and
press Enter.
5
Press Stop/Clear to return to Standby mode.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Power Save appears and press
Enter.
4
Press the Scroll buttons until On appears and press Enter.
5
Press the Scroll buttons until the time setting you want appears and
press Enter.
6
Press Stop/Clear to return to Standby mode.
2.4
<System setup>
3 Software overview
CD
PostScript
printer driver
CD
This chapter gives you an overview of the software that comes with your
machine. Further details about installing and using the software are
explained in the Software Section.
Contents
Windows
• Postscript Printer Description
(PPD) file: Use the PostScript driver
to print documents with complex
fonts and graphics in the PS
language.
• User Guide in PDF
Macintosh
• Postscript Printer Description
(PPD) file: Use this file to run your
machine from a Macintosh computer
and print documents.
• Scan driver: TWAIN driver is
available for scanning documents on
your machine.
This chapter includes:
•
Supplied software
•
Printer driver features
•
System requirements
Supplied software
You must install the printer and scanner software using the supplied CDs
after you have set up your machine and connected it to your computer.
Each CD provides you with the following software:
CD
Printer
software CD
Contents
Windows
• Printer driver: Use this driver to
take full advantage of your printer’s
features.
• Scanner driver: TWAIN and
Windows Image Acquisition (WIA)
drivers are available for scanning
documents on your machine.
• Status Monitor: This program
allows you to monitor the machine’s
status and alerts you when an error
occurs during printing.
• Network Scan: This program allows
you to scan a document on your
machine and save it to a networkconnected computer.
• User Guide in PDF
• Set IP: Use this program to set your
machine’s TCP/IP addresses.
• PC Fax: This program allows you to
launch fax in your PC when the
machine is connected to your PC.
Linux
• Printer driver: Use this driver to run
your machine from a Linux computer
and print documents.
• SANE: Use this driver to scan
documents.
• Status Monitor: This program
allows you to monitor the machine’s
status and alerts you when an error
occurs during printing.
3.1
<Software overview>
Printer driver features
System requirements
Your printer drivers support the following standard features:
• Paper source selection
Before you begin, ensure that your system meets the following
requirements:
• Paper size, orientation and media type
Windows
• Number of copies
In addition, you can use various special printing features. The following
table shows a general overview of features supported by your printer
drivers:
Feature
PCL 6
Windows
PostScript
Windows
Macintosh
Linux
Toner save
O
O
O
O
Print quality
option
O
O
O
O
Poster
printing
O
X
X
X
Multiple
pages per
sheet (N-up)
O
O
O
O
(2, 4)
Fit to page
printing
O
O
O
O
Scale printing
O
O
O
O
Watermark
O
X
X
X
Overlay
O
X
X
X
Requirement (recommended)
Operating
System
CPU
free HDD
space
RAM
Windows
2000
Pentium II 400 MHz
(Pentium III 933 MHz)
64 MB
(128 MB)
650 MB
Windows
XP
Pentium III 933 MHz
(Pentium IV 1 GHz)
128 MB
(256 MB)
1.5 GB
Windows
2003
Server
Pentium III 933 MHz
(Pentium IV 1 GHz)
128 MB
(512 MB)
1.25 GB to
2 GB
Windows
Vista
Pentium IV 3 GHz
512 MB
(1024 MB)
15 GB
Notes
• Internet Explorer 5.0 or higher is the minimum
requirement for all Windows operating systems.
• Users who have an administrator right can install the
software
Macintosh
Operating
System
3.2
Requirement (recommended)
CPU
RAM
free HDD
space
Mac OS X
10.4 or
lower
Intel
Processor
Power PC
G4 / G5
128 MB for a Power-PC
based Mac (512 MB)
512 MB for an Intelbased Mac (1 GB)
1 GB
Mac OS X
10.5
Intel
Processor
867 MHz or
faster Power
PC G4 / G5
512 MB (1 GB)
1 GB
<Software overview>
Linux
Item
Operating
system
Requirements (Recommended)
RedHat 8.0, 9.0 (32 bit)
RedHat Enterprise Linux WS 4, 5 (32/64 bit)
Fedora Core 1~7 (32/64 bit)
Mandrake 9.2 (32 bit), 10.0, 10.1 (32/64 bit)
Mandriva 2005, 2006, 2007 (32/64 bit)
SuSE Linux 8.2, 9.0, 9.1 (32 bit)
SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64 bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04 (32/64 bit)
Debian 3.1, 4.0 (32/64 bit)
CPU
Pentium IV 2.4 GHz (IntelCore2)
RAM
512 MB (1024 MB)
free HDD space
1 GB (1 GB)
Software
Linux Kernel 2.4 or higher
Glibc 2.2 or higher
CUPS
3.3
<Software overview>
4 Network setup
Via the control panel
You can set up the following basic network parameters through the
machine’s control panel:
This chapter gives you step-by-step instructions for setting up your
machine for network connections.
• Configure TCP/IP
• Configure EtherTalk
This chapter includes:
•
Introduction
•
Supported operating systems
•
Locating the 3300MFP IP Address
•
Accessing CentreWare Internet Services (CWIS)
•
Configuring TCP/IP
•
Configuring EtherTalk
•
Configuring 802.1x
•
Setting Ethernet speed
•
Restoring the network configuration
•
Printing a network configuration page
Supported operating systems
The following table shows the network environments supported by the
machine:
Item
Introduction
Once you have connected your machine to a network with an RJ-45
Ethernet cable, you can share the machine with other network users.
You need to set up the network protocols on the machine to use it as your
network printer. Protocols can be set up by the following two methods:
Requirements
Network interface
• 10/100 Base-TX
Network operating
system
• Windows 2000/XP/2003/Vista
• Various Linux OS
• Macintosh OS 10.3 ~ 10.5
Network protocols
• TCP/IP on Windows
• EtherTalk
Dynamic addressing
server
• DHCP, BOOTP
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Via network administration programs
You can configure your machine’s print server settings and manage the
machine via the following programs that came with your machine:
Locating the 3300MFP IP Address
• CentreWare IS: CentreWare Internet Services is the embedded HTTP
server application that resides in the 3300MFP. CentreWare Internet
Services allows administrators to change network and system settings
on the 3300MFP from the convenience of their desktops. The user will
require the 3300MFP IP address to access CWIS. Many of the
features available within CentreWare Internet Services will require an
administrator user name and password. The default user name is
admin and the default password is 1111. A user will only be prompted
for an administrator’s user name and password once in a single
browser session.
This embedded web server allows you to:
- Configure the network parameters necessary for the machine to
connect to various network environments.
- Customize e-mail settings and set up Address Book for scanning
to email.
- Customize server settings and set up server lists for scanning to an
FTP or SMB servers.
- Customize printer, copy, and fax settings.
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
2
Press the Scroll buttons until Network Info. appears and press
Enter.
3
Press Enter when Yes appears. The Network Configuration page
prints out.
4
On the Network Configuration page note the IP Address (Example
169.123.21.23)
Accessing CentreWare Internet Services (CWIS)
1
On your PC open a web browser such as Internet Explorer.
• SetIP: Utility program allowing you to select a network interface and
manually configure the IP addresses for use with the TCP/IP protocol.
See the Software Section.
4.1
<Network setup>
Dynamic addressing (BOOTP/DHCP)
2
In the URL or Address field enter http;//xxx.xxx.xxx.xxx where x is
your IP address.
3
Press Enter.
To have a TCP/IP address assigned automatically by the server, take the
following steps:
4
Select a tab to view.
1
Press Menu until Network appears on the bottom line of the
display.
2
Press Enter when TCP/IP appears.
3
Press the Scroll buttons until DHCP or BOOTP appears and press
Enter.
4
Press Stop/Clear to return to Standby mode.
Configuring TCP/IP
Your machine can be set up with a variety of TCP/IP network information,
such as an IP address, a subnet mask, a gateway, and DNS addresses.
There are several ways in which your machine can be assigned a TCP/
IP address, depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the
system administrator.
Configuring EtherTalk
• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address is
assigned automatically by the server.
EtherTalk is AppleTalk used in an Ethernet network. This protocol is
widely used in Macintosh network environments. To use EtherTalk, take
the following steps:
Note
Before configuring TCP/IP, you need to set the network protocol
to TCP/IP.
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
Static addressing
2
Press the Scroll buttons until EtherTalk appears and press Enter.
To enter a TCP/IP address from your machine’s control panel, take the
following steps:
3
Press the Scroll buttons until On appears and press Enter.
4
Press Stop/Clear to return to Standby mode.
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
2
Press Enter when TCP/IP appears.
3
Press the Scroll buttons until Static appears and press Enter.
4
Press Enter when IP Address appears.
5
Enter a byte between 0 and 255 using the number keypad and
press the Scroll buttons to move between bytes.
Configuring 802.1x
Your printer has 802.1x protocol on its network. 802.1x is a security
standard for port based network access control. It secures your network
against unauthorized access by requiring authentication before network
Repeat this to complete the address from the 1st byte to the 4th
byte.
6
When you have finished, press Enter.
7
Repeat steps 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address.
8
Press the Scroll buttons until Static appears and press Enter.
9
Press the Scroll buttons until Primary DNS appears and press
Enter.
10 Enter each byte of the address and press Enter.
11 Press the Scroll buttons until Secondary DNS appears and press
Enter.
12 Enter each byte of the address and press Enter.
13 Press Stop/Clear to return to Standby mode.
4.2
<Network setup>
access and data transmission are allowed. There are 3 mutually
exclusive options for 802.1x authentication.
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
To use 802.1x, take the following steps:
2
Press Menu until Network appears on the bottom line of the display
and press Enter.
Press the Scroll buttons until Clear Setting appears and press
Enter.
3
Press Enter when Yes appears to restore the network configuration.
2
Press the Scroll buttons until 802.1x appears and press Enter.
4
Power the machine off and back on.
3
Press the Scroll buttons until On appears and press Enter.
4
Press the Scroll buttons until the desired authentication method
appears.
Printing a network configuration page
• EAP-MD5: EAP-MD5 (Extensible Authentication Protocol
Message Digest algorithm 5) is a message hashing scheme
between client and server to allow the transfer of user data in a
secure fashion.
The Network Configuration page shows how the network interface card
on your machine is configured.
1
• EAP-MSCHAPv2: EAP-MSCHAP (Extensible Authentication
Protocol Microsoft version of the Challenge-Handshake
Authentication Protocol). MSCHAP v2 is a one-way encrypted
password, mutual authentication process. MS-CHAPv2 uses
different hashing/encryption algorithms to encode the UserID and
passwords.
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
2
Press the Scroll buttons until Network Info. appears and press
Enter.
3
Press Enter when Yes appears.
The Network Configuration page prints out.
• PEAP: PEAP (Protected EAP).
5
Enter user name and passcode using Scroll button.
6
Press Enter to save the selection.
7
Press Start/Stop to return to Standby mode.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1
Press Menu until Network appears on the bottom line of the display
and press Enter.
2
Press the Scroll buttons until Ethernet Speed appears and press
Enter.
3
Press the Scroll buttons until the speed you want appears and
press Enter.
4
Press Stop/Clear to return to Standby mode.
Restoring the network configuration
You can return the network configuration to its default settings.
4.3
<Network setup>
5 Loading originals and print
2
Place the original face down on the scanner glass and align it with
the registration guide at the top left corner of the glass.
3
Close the scanner lid.
media
This chapter introduces you to how to load originals and print media into
your machine.
This chapter includes:
•
Loading originals
•
Selecting print media
•
Loading paper
•
Setting the paper size and type
•
Selecting an output location
Loading originals
You can use the scanner glass or ADF to load an original for copying,
scanning, and sending a fax.
On the scanner glass
Notes
Make sure that no originals are in the ADF. If an original is detected in the
ADF, the machine gives it priority over the original on the scanner glass.
To get the best scan quality, especially for color or gray-scaled images,
use the scanner glass.
1
• Leaving the scanner lid open while copying may affect copy
quality and toner consumption.
• Dust on the scanner glass may cause black spots on the
printout. Always keep it clean.
• If you are copying a page from a book or magazine, lift the
scanner lid until its hinges are caught by the stopper and then
close the lid. If the book or magazine is thicker than 30 mm,
start copying with the lid open.
Lift and open the scanner lid.
In the ADF
Using the ADF, you can load up to 50 sheets of paper (75 g/m2) for one
job.
When you use the ADF:
• Do not load paper smaller than 142 x 148 mm or larger than
216 x 356 mm.
• Do not attempt to load the following types of paper:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely
dry before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents
having other unusual characteristics.
5.1
<Loading originals and print media>
To load an original into the ADF:
1
Selecting print media
Load the original face up into the ADF. Make sure that the bottom of
the original stack matches the paper size marked on the document
input tray.
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the
guidelines for use with your machine. Print media that does not meet the
guidelines outlined in this user guide may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are
important factors that affect the machine’s performance and the output
quality. When you choose print materials, consider the following:
• The type, size and weight of the print media for your machine is
described in following tables.
• Desired outcome: The print media you choose should be appropriate
for your project.
2
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
Adjust the document width guides to the paper size.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
Notes
• Some print media may meet all of the guidelines in this section
and still not produce satisfactory results. This may be the result
of improper handling, unacceptable temperature and humidity
levels, or other variables over which Xerox has no control.
• Before purchasing large quantities of print media, ensure that it
meets the requirements specified in this user guide.
Caution
Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not covered
by Xerox’s warranty or service agreements.
Note
Dust on the ADF glass may cause black lines on the printout.
Always keep it clean.
5.2
<Loading originals and print media>
Supported print media types and sizes
Type
Plain paper
Size
Dimensions
Weight1
Capacity2
• 60 to 90 g/m2 (16 to 24 lb
bond) for the tray
• 60 to 163 g/m2 (16 to 43 lb
bond) for the multi-purpose
tray
• 250 sheets of 75 g/m2
(20 lb bond) paper for the
tray
• 50 sheets for the multipurpose tray
75 to 90 g/m2 (20 lb to 24 lb
bond)
5 sheets of 75 g/m2 (20 lb
bond) in the multi-purpose
tray
Letter
216 x 279 mm (8.5 x 11 inches)
Legal
216 x 356 mm (8.5 x 14 inches)
Folio
216 x 330.2 mm (8.5 x 13 inches)
Oficio
216 x 343 mm (8.5 x 13.5 inches)
A4
210 x 297 mm (8.27 x 11.69 inches)
JIS B5
182 x 257 mm (7.18 x 10.12 inches)
ISO B5
176 x 250 mm (6.93 x 9.84 inches)
Executive
184.2 x 266.7 mm (7.25 x 10.5 inches)
A5
148.5 x 210 mm (5.85 x 8.27 inches)
A6
105 x 148.5 mm (4.13 x 5.85 inches)
Envelope B5
176 x 250 mm (6.93 x 9.84 inches)
Envelope Monarch
98.4 x 190.5 mm (3.88 x 7.5 inches)
Envelope COM-10
105 x 241 mm (4.12 x 9.5 inches)
Envelope DL
110 x 220 mm (4.33 x 8.66 inches)
Envelope C5
162 x 229 mm (6.38 x 9.02 inches)
Envelope C6
114 x 162 mm (4.49 x 6.38 inches)
Transparency
Letter, A4
Refer to the Plain paper section
138 to 146 g/m2 (37 to 39 lb
bond)
5 sheets of 75 g/m2 (20 lb
bond) in the multi-purpose
tray
Labels
Letter, Legal, Folio,
A4, JIS B5, ISO B5,
Executive, A5, A6
Refer to the Plain paper section
120 to 150 g/m2 (32 to 40 lb
bond)
5 sheets of 75 g/m2 (20 lb
bond) in the multi-purpose
tray
Card stock
Letter, Legal, Folio,
A4, JIS B5, ISO B5,
Executive, A5, A6
Refer to the Plain paper section
60 to 163 g/m2 (16 to 43 lb
bond)
5 sheets of 75 g/m2 (20 lb
bond) in the multi-purpose
tray
Minimum size (custom)
76 x 127 mm (3 x 5 inches)
Maximum size (custom)
215.9 x 356 mm (8.5 x 14 inches)
60 to 163 g/m2 (16 to 43 lb
bond)
5 sheets of 75 g/m2 (20 lb
bond) in the multi-purpose
tray
Envelope
1. If media weight is over 90 g/m2 (24 lb bond), use the multi-purpose tray.
2. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
5.3
<Loading originals and print media>
Media sizes supported in each mode
Mode
Size
Guidelines for special print media
Media type
Source
Copy mode
Letter, A4, Legal, Folio,
Executive, ISO B5, JIS
B5, A5, A6
• tray 1
• optional tray 2
• multi-purpose tray
Single side
printing
All sizes supported by
the machine
• tray 1
• optional tray 2
• multi-purpose tray
Duplex printing1
Letter, A4, Legal, Folio
• tray 1
• optional tray 2
• multi-purpose tray
Fax mode
Letter, A4, Legal
• tray 1
• optional tray 2
Envelopes
1. 75 to 90 g/m2 (20 to 24 lb bond) only
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print materials,
keep these guidelines in mind:
• Always use print media that conform with the specifications listed on
page 5.3.
• Attempting to print on damp, curled, wrinkled, or torn paper can cause
paper jams and poor print quality.
• For the best print quality, use only high quality copier grade paper
specifically recommended for use in laser printers.
• Avoid using the following media types:
- Paper with embossed lettering, perforations, or a texture that is too
smooth or too rough
- Erasable bond paper
- Multi-paged paper
- Synthetic paper and thermally reactive paper
- Carbonless paper and Tracing paper.
Use of these types of paper could result in paper jams, chemical
smells, and damage to your machine.
• Store print media in its ream wrapper until you are ready to use it.
Place cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture or other conditions that can
cause it to wrinkle or curl.
• Store unused print media at temperatures between 15 °C and 30 °C.
The relative humidity should be between 10% and 70%.
• Store unused print media in a moisture-proof wrap, such as a plastic
container or bag, to prevent dust and moisture from contaminating
your paper.
• Load special media types one sheet at a time through the multipurpose tray to avoid paper jams.
• To prevent print media, such as transparencies and label sheets, from
sticking together, remove them as they print out.
Guidelines
• Successful printing on envelopes depends upon
the quality of the envelopes. When selecting
envelopes, consider the following factors:
- Weight: The weight of the envelope paper
should not exceed 90 g/m2 or jamming may
occur.
- Construction: Prior to printing, envelopes
should lie flat with less than 6 mm curl, and
should not contain air.
- Condition: Envelopes should not be wrinkled,
nicked, or otherwise damaged.
- Temperature: You should use envelopes that
are compatible with the heat and pressure of
the machine during operation.
• Use only well-constructed envelopes with sharp
and well creased folds.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps,
windows, coated lining, self-adhesive seals, or
other synthetic materials.
• Do not use damaged or poorly made envelopes.
• Be sure the seam at both ends of the envelope
extends all the way to the corner of the
envelope.
Acceptable
Unacceptable
• Envelopes with a peel-off adhesive strip or with
more than one flap that folds over to seal must
use adhesives compatible with the machine’s
fusing temperature of 180 °C for 0,1 second.
The extra flaps and strips might cause wrinkling,
creasing, or jams, and may even damage the
fuser.
• For the best print quality, position margins no
closer than 15 mm from the edges of the
envelope.
• Avoid printing over the area where the
envelope’s seams meet.
5.4
<Loading originals and print media>
Media type
Guidelines
Transparencies
• To avoid damaging the machine, use only
transparencies designed for use in laser printers.
• Transparencies used in the machine must be
able to withstand 180 °C, the machine’s fusing
temperature.
• Place them on a flat surface after removing them
from the machine.
• Do not leave them in the paper tray for long
periods of time. Dust and dirt may accumulate
on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints,
handle them carefully.
• To avoid fading, do not expose printed
transparencies to prolonged sunlight.
• Ensure that transparencies are not wrinkled,
curled, or have any torn edges.
Labels
• To avoid damaging the machine, use only labels
designed for use in laser printers.
• When selecting labels, consider the following
factors:
- Adhesives: The adhesive material should be
stable at 180 °C, the machine’s fusing
temperature.
- Arrangement: Only use labels with no
exposed backing between them. Labels can
peel off sheets that have spaces between the
labels, causing serious jams.
- Curl: Prior to printing, labels must lie flat with
no more than 13 mm of curl in any direction.
- Condition: Do not use labels with wrinkles,
bubbles, or other indications of separation.
• Make sure that there is no exposed adhesive
material between labels. Exposed areas can
cause labels to peel off during printing, which
can cause paper jams. Exposed adhesive can
also cause damage to machine components.
• Do not run a sheet of labels through the machine
more than once. The adhesive backing is
designed for only a single pass through the
machine.
• Do not use labels that are separating from the
backing sheet or are wrinkled, bubbled, or
otherwise damaged.
Card stock or
custom-sized
materials
Media type
Preprinted
paper
Guidelines
• Letterhead must be printed with heat-resistant
ink that will not melt, vaporize, or release
hazardous emissions when subjected to the
machine’s fusing temperature of 180 °C for
0,1 second.
• Letterhead ink must be non-flammable and
should not adversely affect printer rollers.
• Forms and letterhead should be sealed in a
moisture-proof wrapping to prevent changes
during storage.
• Before you load preprinted paper, such as forms
and letterhead, verify that the ink on the paper is
dry. During the fusing process, wet ink can come
off preprinted paper, reducing print quality.
Loading paper
In tray 1
Load the print media you use for the majority of your print jobs in tray 1.
Tray 1 can hold a maximum of 250 sheets of 75 g/m2 plain paper.
You can purchase an optional tray (tray 2) and attach it below the
standard tray to load an additional 250 sheets of paper. For order
information for an optional tray, see page 12.1.
The paper level indicator on the front of tray 1 and the optional tray 2
shows the amount of paper currently left in the tray. When the tray is
empty, the indicator of the bar is completely lowered.
Full
Empty
• Do not print on media smaller than 98 mm wide
or 148 mm long.
• In the software application, set margins at least
6,4 mm away from the edges of the material.
5.5
<Loading originals and print media>
Loading paper in tray 1 or optional tray 2
1
1
Press and hold the guide lock, and slide the paper length guide to
locate it in the correct paper size slot.
2
After inserting paper into the tray, adjust the support guide so that it
lightly touches the paper stack.
3
Squeeze the paper width guides, as shown and slide them to the
stack of paper until it lightly touches the side of the stack.
Pull open the paper tray and load paper.
You can load letterhead with the design side face down. The top
edge of the sheet with the logo should be placed at the front of the
tray.
2
After loading paper, set the paper type and size for the multipurpose tray. See page 5.8 for copying and faxing or the Software
Section for PC-printing.
Notes
• If you experience problems with paper feed, place one sheet at
a time in the multi-purpose tray.
• You can load previously printed paper. The printed side should
be facing up with an uncurled edge at the front. If you
experience problems with paper feed, turn the paper around.
Note that print quality is not guaranteed.
Changing the size of the paper in the paper tray
To load longer sizes of paper, such as Legal-sized paper, you need to
adjust the paper guides to extend the paper tray.
3
1
2
4
1
2
3
4
Notes
paper length guide
• Do not push the paper width guides far enough to cause the
materials to warp.
• If you do not adjust the paper width guides, it may cause paper
jams.
support guide
guide lock
paper width guides
5.6
<Loading originals and print media>
In the multi-purpose tray
Notes
The multi-purpose tray can hold special sizes and types of print material,
such as transparencies, postcards, note cards, and envelopes. It is useful
for single page printing on letterhead or colored paper.
Depending on the media type you are using, keep the following
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top
left side.
• Transparencies: Print side up and the top with the adhesive
strip entering the machine first.
• Labels: Print side up and top short edge entering the machine
first.
• Preprinted paper: Design side up with the top edge toward the
machine.
• Card stock: Print side up and the short edge entering the
machine first.
• Previously printed paper: Previously printed side down with an
uncurled edge toward the machine.
To load paper in the multi-purpose tray:
1
2
Open the multi-purpose tray and unfold the multi-purpose tray
extension, as shown.
Squeeze the multi-purpose tray paper width guides and adjust them
to the width of the paper. Do not force too much, or the paper will be
bent, which will result in a paper jam or skew.
5
After loading paper, set the paper type and size for the multipurpose tray. See page 5.8 for copying and faxing or the Software
Section for PC-printing.
If you are using paper, flex or fan the edge of the paper stack to
separate the pages before loading.
For transparencies, hold them by the edges and avoid touching the
print side. Oils from your fingers can cause print quality problems.
3
4
Load the paper with the side to be printed on facing up.
Note
The settings made from the printer driver override the
settings on the control panel.
Caution
Make sure to open the rear cover when you print on
transparencies. If not, they may tear while exiting the
machine.
6
5.7
After printing, fold the multi-purpose tray extension and close the
multi-purpose tray.
<Loading originals and print media>
Tips on using the multi-purpose tray
Selecting an output location
• Load only one size of print media at a time in the multi-purpose tray.
The machine has two output locations: the rear cover (face up) and the
output tray (face down).
• To prevent paper jams, do not add paper when there is still paper in
the multi-purpose tray. This also applies to other types of print media.
• Print media should be loaded face up with the top edge going into the
multi-purpose tray first and be placed in the center of the tray.
• Always load only the print media specified in page 5.2 to avoid paper
jams and print quality problems.
• Flatten any curl on postcards, envelopes, and labels before loading
them into the multi-purpose tray.
2
• Make sure to open the rear cover when you print on transparencies. If
not, they may tear while exiting the machine.
Setting the paper size and type
After loading paper in the paper tray, you need to set the paper size and
type using the control panel buttons. These settings will apply to Copy
and Fax modes. For PC-printing, you need to select the paper size and
type in the application program you use on your PC.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Paper Setup appears and press
Enter.
3
Press Enter when Paper Size appears.
4
Press the Scroll buttons until the paper tray you want appears and
press Enter.
5
Press the Scroll buttons until the paper size you are using appears
and press Enter.
6
Press Exit to return to the upper level.
7
Press the Scroll buttons until Paper Type appears and press Enter.
8
Press the Scroll buttons until the paper type you are using appears
and press Enter.
9
Press Stop/Clear to return to Standby mode.
1
1
2
output tray
rear cover
The printer sends output to the output tray by default. To use the output
tray, make sure that the rear cover is closed.
Notes
• If paper coming out of the output tray has problems, such as
excessive curl, try printing to the rear cover.
• To avoid paper jams, do not open or close the rear cover while
the machine is printing.
Printing to the output tray
The output tray collects printed paper face down, in the order in which
the sheets were printed. The tray should be used for most print jobs.
5.8
<Loading originals and print media>
Printing to the rear cover
Using the rear cover, paper comes out of the machine face up.
Printing from the multi-purpose tray to the rear cover provides a straight
paper path. Using the rear cover might improve the output quality with
special print media.
To use the rear cover, open it by pulling down.
Caution
The fuser area inside the rear cover of your machine becomes
very hot when in use. Take care when you access this area.
5.9
<Loading originals and print media>
6 Copying
Note
You can cancel the copy job during an operation. Press Stop/
Clear, and the copying will stop.
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
Changing the settings for each copy
•
Selecting the paper tray
•
Copying
•
Changing the settings for each copy
•
Changing the default copy settings
•
Using special copy features
•
Copying on both sides of paper
•
Setting copy timeout
Your machine provides default settings for copying so that you can
quickly and easily make a copy. However, if you want to change the
options for each copy, use the copy function buttons on the control panel.
Note
If you press Stop/Clear while setting the copy options, all of the
options you have set for the current copy job will be canceled
and returned to their default status. Or, they will automatically
return to their default status after the machine completes the
copy in progress.
Selecting the paper tray
Lighten/Darken
After loading the print media for copy output, you must select the paper
tray you will use for copy jobs.
If you have an original containing faint markings and dark images, you
can adjust the brightness to make a copy that is easier to read.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Paper Setup appears and press
Enter.
• Normal: Works well with standard typed or printed originals.
3
Press the Scroll buttons until Paper Source appears and press
Enter.
• Dark: Works well with light print or faint pencil markings.
4
Press Enter when Copy Tray appears.
Original Type
5
Press the Scroll buttons until the paper tray you want appears and
press Enter.
The original type setting is used to improve the copy quality by selecting
the document type for the current copy job.
6
Press Stop/Clear to return to Standby mode.
To select the document type, press Original Type. Each time you press
the button, the following modes are available:
To adjust the darkness of copies, press Lighten/Darken. Each time you
press the button, the following modes are available:
• Light: Works well with dark print.
• Text: Use for originals containing mostly text.
Copying
1
• Text/Photo: Use for originals with mixed text and photographs.
• Photo: Use when the originals are photographs.
Press Copy.
Ready to Copy appears on the top line of the display.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3
Enter the number of copies using the number keypad, if necessary.
4
If you want to customize the copy settings including copy size,
darkness, and original type, by using the control panel buttons, see
page 6.1.
If necessary, you can use special copy features, such as poster
copying, 2- or 4-up copying. See page 6.2.
5
Press Start to begin copying.
6.1
<Copying>
Reduced or enlarged copy
Using special copy features
By using the Reduce/Enlarge button, you can reduce or enlarge the size
of a copied image from 25% to 400% when you copy original documents
from the scanner glass, or from 25% to 100% from the ADF.
You can use the following copy features:
To select from the predefined copy sizes:
Collation
1
Press Reduce/Enlarge.
2
Press Reduce/Enlarge or the Scroll buttons until the size setting
you want appears and press Enter.
You can set the machine to sort the copy job. For
example, if you make 2 copies of a 3 page original,
one complete 3 page document will print followed by a
second complete document.
To scale the copy by directly entering the scale rate:
1
Press Reduce/Enlarge.
2
Press Reduce/Enlarge or the Scroll buttons until Custom appears
and press Enter.
3
Enter the scale rate and press Enter to save the selection.
1
Press Copy.
2
Load originals face up into the ADF.
For details about loading an original, see
page 5.1.
3
Enter the number of copies using the number
keypad.
4
Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
5
Press Enter when Copy Collation appears.
6
Press the Scroll buttons to select Yes.
7
Press Enter or Start to begin copying.
Note
When you make a reduced copy, black lines may appear at the
bottom of your copy.
Changing the default copy settings
The copy options, including darkness, original type, copy size, and
number of copies, can be set to those most frequently used. When you
copy a document, the default settings are used unless they have been
changed by using the corresponding buttons on the control panel.
2
Press Menu until Copy Setup appears on the bottom line of the
display and press Enter.
3
Press Enter when Change Default appears.
4
Press the Scroll buttons until the setup option you want appears
and press Enter.
5
Press the Scroll buttons until the setting you want appears and
press Enter.
6
Repeat steps 4 through 5, as needed.
7
Press Stop/Clear to return to Standby mode.
2-up or 4-up copying
Your machine can print 2 or 4 original images reduced
to fit onto one sheet of paper.
1
Press Copy.
2
Load originals face up in the ADF.
2
Press Copy.
For details about loading an original, see
page 5.1.
1
1
One complete document will print followed by the
second complete document.
2-up copying
1
2
3
4
3
Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
4
Press the Scroll buttons until 2-Up or 4-Up
appears and press Enter.
5
Press the Scroll buttons to select Yes.
6
Press Enter or Start to begin copying.
Note
While you are setting copy options, pressing Stop/Clear
cancels the changed settings and restores the defaults.
4-up copying
Note
You cannot adjust the copy size using the
Reduce/Enlarge button for making a 2- or 4up copy.
6.2
<Copying>
ID card copying
Poster copying
Your machine can print 2-sided originals on one sheet
of A4-, Letter-, Legal-, Folio-, Executive-, B5-, A5-, or
A6-sized paper.
Your machine can print an image onto 9 sheets of
paper (3x3). You can paste the printed pages together
to make one poster-sized document.
When you copy using this feature, the machine prints
one side of the original on the upper half of the paper
and the other side on the lower half without reducing
the size of the original. This feature is helpful for
copying a small-sized item, such as a name card.
This copy feature is available only when you place
originals on the scanner glass.
1
Press Copy.
2
Place a single original face down on the scanner
glass.
This copy feature is available only when you place
originals on the scanner glass.
For details about loading an original, see
page 5.1.
1
Press Copy.
2
Place a single original face down on the scanner
glass.
3
Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
For details about loading an original, see
page 5.1.
4
Press the Scroll buttons until Poster Copy
appears and press Enter.
3
Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
5
Press the Scroll buttons to select Yes.
6
Press Enter or Start to begin copying.
4
Press the Scroll buttons until ID Copy appears
and press Enter.
Note
You cannot adjust the copy size using the
Reduce/Enlarge button when making a
poster.
Place Front Side and Press[Start] appears on
the display.
5
Press Enter or Start.
Your original is divided into
9 portions. Each portion is scanned
and printed one by one in the
following order:
Your machine begins scanning the front side and
shows Place Back Side and Press[Start].
6
Open the scanner lid and turn the original over.
Note
If you press Stop/Clear or if no buttons
are pressed for approximately
30 seconds, the machine cancels the
copy job and returns to Standby mode.
7
Press Start to begin copying.
Note
If the original is larger than the printable area,
some portions may not be printed.
6.3
<Copying>
Clone copying
Copying on both sides of paper
Your machine can print multiple image copies from the
original document on a single page. The number of
images is automatically determined by the original
image and paper size.
By using the Duplex button on your machine, you can set the machine to
image on both sides of paper.
This copy feature is available only when you place
originals on the scanner glass.
1
Press Copy.
2
Place a single original face down on the scanner
glass.
1
Press Duplex.
2
Press the Scroll buttons until the binding option you want appears.
• Off: Prints in Normal mode.
• 1->2Side Short: Prints pages to be read by flipping like a note
pad.
• 1->2Side Long: Prints pages to be read like a book.
For details about loading an original, see
page 5.1.
3
Press Menu until Copy Feature appears on the
bottom line of the display and press Enter.
4
Press the Scroll buttons until Clone Copy
appears and press Enter.
5
Press the Scroll buttons to select Yes.
6
Press Enter or Start to begin copying.
2
3
2
1->2Side Long
3
Press Enter to save your selection.
4
Start copying a document.
Setting copy timeout
Erasing background images
You can set the machine to print an image without its background. This
copy feature removes the background color and can be helpful when
copying an original containing color in the background, such as a
newspaper or a catalog.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
For details about loading an original, see page 5.1.
3
Press Menu until Copy Feature appears on the bottom line of the
display and press Enter.
4
Press the Scroll buttons until Erase Bkgd. appears and press
Enter.
5
Press the Scroll buttons to select On and press Enter.
6
Press Stop/Clear to return to Standby mode.
7
Enter the number of copies using the number keypad.
8
Press Start to begin copying.
1->2Side Short
If the mode is enabled, the Duplex button is backlit.
You cannot adjust the copy size using the
Reduce/Enlarge button while making a
clone copy.
Press Copy.
3
5
Note
1
5
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press Enter when Machine Setup appears.
3
Press the Scroll buttons until Timeout appears and press Enter.
4
Press the Scroll buttons until the time setting you want appears.
Selecting Off means that the machine does not restore the default
settings until you press Start to begin copying, or Stop/Clear to
cancel.
6.4
5
Press Enter to save your selection.
6
Press Stop/Clear to return to Standby mode.
<Copying>
7 Basic printing
This chapter explains common printing tasks.
Printing a document
Your machine allows you to print from various Windows, Macintosh, or
Linux applications. The exact steps for printing a document may vary
depending on the application you use.
For details about printing, see the Software Section.
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the
printer group in Windows, delete the job as follows:
1
Click the Windows Start menu.
2
For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel > Hardware and Sound
> Printers.
3
Double-click the Xerox Phaser 3300MFP PCL 6 or Xerox Phaser
3300MFP PS icon.
4
From the Document menu, select Cancel.
Note
You can also access this window by simply double-clicking the
printer icon at the bottom right corner of the Windows desktop.
You can also cancel the current job by pressing Stop/Clear on the control
panel.
7.1
<Basic printing>
8 Scanning
Scanning to an application using a local
connection
Scanning with your machine lets you turn pictures and text into digital files
that can be stored on your computer. Then you can fax or email the files,
upload them to your website, or use them to create projects that you can
print.
This chapter includes:
•
Scanning basics
•
Scanning to an application using a local connection
•
Scanning using a network connection
•
Changing the settings for each scan job
•
Changing the default scan settings
•
Setting up Address Book
1
Make sure that your machine and computer are turned on and
properly connected to each other.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3
Press Scan.
Ready to Scan appears on the top line of the display.
4
Press the Scroll buttons until Scan to Appl. appears on the bottom
line of the display and press Enter.
5
Press the Scroll buttons until the application you want to use
appears and press Enter.
Scanning basics
• Microsoft Paint: Sends the scanned image to Microsoft Paint.
• Email: Sends the scanned image to your default email program on
your computer. A new message window opens with the image
attached.
Your machine offers the following ways to scan an image using a local
connection:
• Via one of the preset imaging applications. Scanning an image
launches the selected application, enabling you to control the
scanning process. See the next section.
• My Document: Saves the scanned image in the default folder, My
Documents, on your computer.
• OCR: Sends the scanned image to the OCR program for text
recognition.
• Via the Windows Images Acquisition (WIA) driver. See the Software
Section.
Note
• To a portable USB memory device, if inserted into the USB memory
port on your machine. See page 11.1.
You can add more TWAIN-compliant software for scanning,
such as Adobe Photoshop, from the Printer Settings
Utility. See the Software Section.
Also, you can send scanned images to several destinations using a
network connection:
6
• To your networked computer via the Network Scan program. You can
scan an image from the machine, if network-connected, to the
computer where the Network Scan program is running.
On the selected application, adjust the scan settings and begin
scanning. For details, please refer to the application user guide.
• To Email. You can send the scanned image as an attachment to an
email. See page 8.4.
• To an FTP file server: You can scan an image and upload it to an FTP
server. See page 8.4.
• To a computer networked via SMB (NetBEUI)a protocol: You can scan
an image and send it to a shared folder on an SMB server. See
page 8.5.
a. A network protocol provided by Microsoft Corporation for Windows network
systems.
8.1
<Scanning>
Registering authorized users
Scanning using a network connection
To use an FTP server or SMB server, or to send an email, you need to
register authorized users using CentreWare IS. You can add up to 2000
users.
If you have connected your machine to a network and set up network
parameters correctly, you can scan and send images over the network.
1
Preparing for network scanning
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
Before using your machine’s network scanning features, you need to
configure the following settings depending on your scan destination:
Note
The IP address can be found on the Network Info. page in
Menu
System Setup
Report.
• Adding the machine to the Network Scan program for scanning to a
network client
2
Click Properties
• Setting up an account for scanning to Email
3
Enable User Authentication. Check the Enable Auth User box.
• Setting up FTP servers for scanning to FTP
4
Check the Enable Guest Account box to allow guest access. If this
option is enabled, then enter a Guest Login Name and a Guest
Password from 4-10 digits that can be used by the guest account to
access the feature.
First, install the Network Scan program. See the Software Section.
5
Click the Add button to add new accounts.
To scan images from your machine to your computer through the
network, you need to register the machine as an authorized network
scanner in the Network Scan program.
6
Enter a User Name, a Auth ID, Password and Email address for
each account desired. Your machine can hold up to 2000 accounts.
• Registering as an authorized user for scanning to Email, FTP, or SMB
• Setting up SMB servers for scanning to SMB
Adding the machine to the Network Scan program
1
E-mail
User Authentication.
Note
In Windows, select Start
Programs
Xerox Network Printer
Utilities
Network Scan
Network Scan.
From the control panel on your machine, verify the user
correctly registered.
The Xerox Network Scan Manager window opens.
1
2
Click the Add Device button or double-click the Add Device icon.
3
Click Next.
2 Press the Scroll buttons until Scan to Email appears on the
bottom line of the display. Then press Enter.
4
Select Browse for a scanner. (recommended), or select Connect
to this scanner. and enter the IP address of your machine.
5
Click Next.
A list of the scanners on your network appears.
6
Press Scan.
3
The machine will prompt for a Login. Enter a valid My login
ID, Password, and Destination Email.
4
The machine will open the email service. If an invalid set of
credentials was entered the Phaser MFP will return Scan.
Setting up an e-mail account
Select your machine from the list and enter a name, user ID, and
PIN (Personal Identification Number) for the machine.
To scan and send an image as an email attachment, you need to set up
network parameters using CentreWare IS.
Notes
• For the scanner name, the model name of your machine is
automatically entered, but can be changed.
• You can enter an ID of up to 8 characters. The first character
must be a letter.
• The PIN must be 4 digits.
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
2
Click Machine Settings and E-mail Setup.
3
Select IP Address or Host Name.
7
Click Next.
4
Enter the IP address in dotted decimal notation or as a host name.
8
Click Finish.
5
Enter the server port number, from 1 to 65535.
Your machine is added to the Network Scan program and you can
now scan images through the network.
The default port number is 25.
Note
You can change the scanner properties of your machine and the
scan settings from the Xerox Network Scan Manager window.
Click Properties and set the options in each tab.
8.2
6
Put a check mark in SMTP Requires Authentication to require
authentication.
7
Enter the SMTP server login name and password.
<Scanning>
Setting up an FTP server
The default port number is 139.
To use an FTP server, you need to set up parameters for access to FTP
servers using CentreWare IS.
10 Enter the share name of the server.
11 Put a check mark in Anonymous if you want to allow the SMB
server to be accessed by unauthorized persons.
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
2
Click Machine Settings and FTP Setup.
3
Click Server List.
4
Click Add.
5
Select the index number, from 1 to 20.
6
Enter a name in Alias for the Setup for the corresponding Server
List entry. This name will be displayed on your machine.
7
Select IP Address or Host Name.
Scanning to a network client
8
Enter the server address in dotted decimal notation or as a host
name.
Network client allows you to remotely scan an original from your networkconnected machine to your computer in JPEG, TIFF, or PDF file format.
9
Enter the server port number, from 1 to 65535.
Scanning
The default port number is 21.
1
Make sure that your machine and the computer are connected to a
network and Network Scan is running on the computer.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
By default, this is unchecked.
12 Enter the login name and password.
13 Enter the domain name of the SMB server.
14 Enter the location the scanned image will be stored. This is the
location you have entered in the step 6.
15 Click Apply.
10 Put a check mark in Anonymous if you want to allow the FTP
server to be accessed by unauthorized persons.
By default, this is unchecked.
For details about loading an original, see page 5.1.
11 Enter the login name and password.
3
Press Scan.
4
Press the Scroll buttons until NetScan appears on the bottom line
of the display and press Enter.
5
Enter the ID you have set in the Xerox Network Scan Manager
window and press Enter.
To use an SMB server, you need to set up parameters for access to SMB
servers using CentreWare IS.
6
Enter the PIN you have set in the Xerox Network Scan Manager
window and press Enter.
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
7
2
Click Machine Settings and SMB Setup.
If the scan destination is folder type, press the Scroll buttons until
the scan setting option you want appears and press Enter. Or,
press Start to immediately start scanning using the default settings.
3
Click Server List.
4
Click Add.
• Resolution: Sets the image resolution.
5
Select the index number, from 1 to 20.
• Scan Color: Sets the color mode.
6
Enter a name in Alias for the Setup for the corresponding Server
List entry. This name will be displayed on your machine.
• Scan Format: Sets the file format in which the image is to be
saved. If you select TIFF or PDF, you can select to scan multiple
pages.
7
Select IP Address or Host Name.
If the scan destination is application type, go to the step 11.
8
Enter the server address in dotted decimal notation or as a host
name.
8
Press the Scroll buttons until the desired status appears and press
Enter.
9
Enter the server port number, from 1 to 65535.
9
Press Start to start scanning.
12 Enter the location the scanned image will be stored. This is the
location you have entered in the step 6.
13 Click Apply.
Setting up an SMB server
• Scan Size: Sets the image size.
• Original Type: Sets the original document’s type.
8.3
<Scanning>
Note
Your machine begins scanning the original to the computer where
the program is running.
This prompt does not appear if you have activated the
Send To Self option in the email account setup.
10 Press the Scroll buttons until the application you want appears and
press Enter. Scanning is started.
8
Enter an email subject and press Enter.
Setting network scan timeout
9
Press the Scroll buttons until the file format you want appears and
press Enter or Start.
If the Network Scan program on your computer does not send a refresh
request and does not scan a job within a specified timeout period, your
machine cancels the scan job. You can change this timeout setting as
needed.
The machine begins scanning and then sends the email.
10 If the machine asks if you want to log off your account, press the
Scroll buttons to select Yes or No and press Enter.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
11 Press Stop/Clear to return to Standby mode.
2
Press Enter when Machine Setup appears.
Scanning to an FTP server
3
Press the Scroll buttons until NetScanTimeout appears and press
Enter.
4
Enter the desired timeout value and press Enter.
You can scan an image and then upload it to an FTP server. You need to
set up parameters for access to FTP servers from CentreWare IS. See
page 8.3.
Before scanning, you can set the scan options for your scan job. See
page 8.5.
The change will be broadcast over the network and will apply to all
clients connected to the network.
5
Press Stop/Clear to return to Standby mode.
1
Make sure that your machine is connected to a network.
2
Load originals face up into the ADF or place a single original on the
scanner glass.
Scanning to Email
For details about loading an original, see page 5.1.
You can scan and send an image as an email attachment. You first need
to set up your email account in CentreWare IS. See page 8.2.
Before scanning, you can set the scan options for your scan job. See
page 8.5.
1
Make sure that your machine is connected to a network.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3
Press Scan.
4
Press the Scroll buttons until Scan to Email appears on the bottom
line of the display and press Enter.
5
Enter the recipient’s email address and press Enter.
3
Press Scan.
4
Press the Scroll buttons until Scan to FTP appears on the bottom
line of the display and press Enter.
5
Press the Scroll buttons until the FTP server you want appears and
press Enter or Start.
6
Press the Scroll buttons until the file type you want appears and
press Enter or Start.
The machine begins scanning and then sends the file to the
specified server.
If you have set up Address Book, you can use a speed button or a
speed email or group email number to retrieve an address from
memory. See page 8.5.
6
To enter additional addresses, press Enter when Yes appears and
repeat step 5.
To continue to the next step, press the Scroll buttons to select No
and press Enter.
7
If the display asks if you want to send the email to your account,
press the Scroll buttons to select Yes or No and press Enter.
8.4
<Scanning>
Scanning to an SMB server
6
Repeat steps 4 and 5 to set other setting options.
You can scan an image and then send it to an SMB server. You need to
set up parameters for access to SMB servers from CentreWare IS. See
page 8.3.
7
When you have finished, press Stop/Clear to return to Standby
mode.
Before scanning, you can set the scan options for your scan job. See
page 8.5.
1
Make sure that your machine is connected to a network.
2
Load originals face up into the ADF or place a single original on the
scanner glass.
Changing the default scan settings
To avoid having to customize the scan settings for each job, you can set
up default scan settings for each scan type.
1
Press Scan.
2
Press Menu until Scan Setup appears on the bottom line of the
display and press Enter.
3
Press Enter when Change Default appears.
4
Press the Scroll buttons until the SMB server you want appears and
press Enter or Start.
Press the Scroll buttons until the scan type you want appears and
press Enter.
5
Press the Scroll buttons until the file format you want appears and
press Enter or Start.
Press the Scroll buttons until the scan setting option you want
appears and press Enter.
6
Press the Scroll buttons until the desired status appears and press
Enter.
7
Repeat steps 5 and 6 to change other settings.
8
To change the default settings for other scan types, press Exit and
repeat from step 4.
9
Press Stop/Clear to return to Standby mode.
For details about loading an original, see page 5.1.
3
Press Scan.
4
Press the Scroll buttons until Scan to SMB appears on the bottom
line of the display and press Enter.
5
6
The machine begins scanning and then sends the file to the
specified server.
Changing the settings for each scan job
Your machine provides you with the following setting options to allow you
to customize your scan jobs.
• Scan Size: Sets the image size.
Setting up Address Book
• Original Type: Sets the original document’s type.
You can set up Address Book with the email addresses you use
frequently via CentreWare IS and then easily and quickly enter email
addresses by entering the location numbers assigned to them in
Address book.
• Resolution: Sets the image resolution.
• Scan Color: Sets the color mode.
• Scan Format: Sets the file format in which the image is to be saved. If
you select TIFF or PDF, you can select to scan multiple pages.
Depending on the selected scan type, this option may not appear.
Registering speed email numbers
To customize the settings before starting a scan job:
1
Press Scan.
2
Press Menu until Scan Feature appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until the scan type you want appears and
press Enter.
4
Press the Scroll buttons until the scan setting option you want
appears and press Enter.
5
Press the Scroll buttons until the desired status appears and press
Enter.
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
2
Click Machine Settings and Local Address Book.
3
Click Add.
4
Select a location number and enter the user name and e-mail
address you want.
5
Click Apply.
Note
You can also click Import and obtain your address book from
your computer.
8.5
<Scanning>
Configuring group email numbers
Using Address Book entries
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
To retrieve an email address, use the following ways:
2
Click Machine Settings and Group Address Book.
3
Click Add.
4
Select a group number and enter the group name you want.
5
Select speed email numbers that will be included in the group.
6
Click Apply.
Speed email numbers
When you are prompted to enter a destination address while sending an
email, enter the speed email number at which you stored the address you
want.
• For a one-digit speed email location, press and hold the
corresponding digit button from the number keypad.
• For a two- or three-digit speed email location, press the first digit
button(s) and then hold down the last digit button.
Retrieving global email addresses from the LDAPa
server
You can also press the speed buttons at which you stored the address
you want.
You can also search through memory for an entry by pressing Address
Book. See page 8.7.
You can use not only local addresses stored in your machine's memory
but also ones in the LDAP server. To use the global addresses, configure
the LDAP server first via CentreWare IS as following:
Group email numbers
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
To use a group email entry, you need to search for and select it from
memory.
2
Click Machine Settings and LDAP Server Setup.
3
Select IP Address or Host Name.
When you are prompted to enter a destination address while sending an
email, press Address Book. See page 8.7.
4
Enter the IP address in dotted decimal notation or as a host name.
5
Enter the server port number, from 1 to 65535.
Global email addresses
To use a global email addresses in the LDAP server, you need to search
for and select it from memory.
The default port number is 389.
6
When you are prompted to enter a destination address while sending an
email, press Address Book. See page 8.7.
Click Add.
a. LightWeight Directory Access Protocol: An Internet protocol that email and
other programs use to look up information from a server.
8.6
<Scanning>
Searching Address Book for an entry
There are two ways to search for an address in memory. You can either
scan from A to Z sequentially or search by entering the first letters of the
name associated with the address.
Searching sequentially through memory
1
If necessary, press Scan.
2
Press Address Book until Search&Send appears on the bottom
line of the display and press Enter.
3
Press the Scroll buttons until the number category you want
appears and press Enter.
4
Press Enter when All appears.
5
Press the Scroll buttons until the name and address you want
appears. You can search upwards or downwards through the entire
memory in alphabetical order.
Searching with a particular first letter
1
If necessary press Scan.
2
Press Address Book until Search&Send appears on the bottom
line of the display and press Enter.
3
Press the Scroll buttons until the number category you want
appears and press Enter.
4
Press the Scroll buttons until ID appears and press Enter.
5
Enter the first few letters of the name you want and press Enter.
6
Press the Scroll buttons until the name you want appears and press
Enter.
Printing Address Book
You can check your Address Book settings by printing a list.
1
Press Address Book until Print appears on the bottom line of the
display.
2
Press Enter. A list showing your speed button settings, and the
speed/group email entries print out.
8.7
<Scanning>
9 Faxing
Sending a fax
This chapter gives you information about using your machine as a fax
machine.
Setting the fax header
This chapter includes:
In some countries, you are required by law to indicate your fax number
on any fax you send. The Machine ID, containing your telephone number
and name or company name, will be printed at the top of each page sent
from your machine.
Sending a fax
•
Setting the fax header
•
Adjusting the document settings
•
Sending a fax automatically
•
Sending a fax manually
•
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
Confirming a transmission
2
Press Enter when Machine Setup appears.
•
Automatic redialing
3
Press Enter when Machine ID appears.
•
Redialing the last number
4
Enter your name or the company name using the number keypad.
Receiving a fax
•
Selecting the paper tray
You can enter alphanumeric characters using the number keypad,
and include special symbols by pressing the 0 button.
•
Changing receiving modes
For details on how to enter alphanumeric characters, see page 2.3.
•
Receiving automatically in Fax mode
•
Receiving manually in Tel mode
•
Receiving automatically in Ans/Fax mode
•
Receiving manually using an extension telephone
•
Receiving faxes using DRPD mode
•
Receiving in secure receiving mode
•
Receiving faxes in memory
•
Printing received faxes on both sides of paper
5
Press Enter to save the ID.
6
Press the Scroll buttons until Machine Fax No. appears and press
Enter.
7
Enter your fax number using the number keypad and press Enter.
8
Press Stop/Clear to return to Standby mode.
Adjusting the document settings
Other ways to fax
•
Sending a fax to multiple destinations
•
Sending a delayed fax
•
Sending a priority fax
•
Forwarding faxes
•
Sending a Fax from a PC
Before starting a fax, change the following settings according to your
original’s status to get the best quality.
Resolution
The default document settings produce good results when using typical
text-based originals. However, if you send originals that are of poor
quality, or contain photographs, you can adjust the resolution to produce
a higher quality Fax.
9.1
1
Press Resolution.
2
Press Resolution or the Scroll buttons until the option you want
appears.
3
Press Enter to save your selection.
<Faxing>
Recommended resolution settings for different original document types
are described in the table below:
Mode
Sending a fax automatically
Recommended for:
Standard
Originals with normal sized characters.
Fine
Originals containing small characters or thin lines or
originals printed using a dot-matrix printer.
Super Fine
Originals containing extremely fine detail. Super
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
Ready to Fax appears on the top line of the display.
3
Adjust the resolution and the darkness to suit your fax needs.
4
Enter the receiving fax machine’s number.
Notes
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.2.
• For memory transmission, Super Fine
mode is not available. The resolution
setting is automatically changed to Fine.
• When your machine is set to Super Fine
resolution and the fax machine with
which you are communicating does not
support Super Fine resolution, the
machine transmits using the highest
resolution mode supported by the other
fax machine.
Photo Fax
Originals containing shades of gray or photographs.
Color Fax
Originals with colors. Sending a color fax is enabled
only if the machine with which you are
communicating supports color fax reception and
you send the fax manually. In this mode, memory
transmission is not available.
5
Press Start.
6
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press Enter.
7
When you have finished, select No at the Another Page? prompt.
After the number is dialed, the machine begins sending the fax
when the receiving fax machine answers.
Note
When you want to cancel a fax job, press Stop/Clear at any
time while sending.
Sending a fax manually
Note
The resolution setting is applied to the current fax job. To
change the default setting, see page 10.2.
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Darkness
For details about loading an original, see page 5.1.
You can select the default contrast mode to fax your originals lighter or
darker.
3
Adjust the resolution and the darkness to suit your fax needs. See
page 9.1.
1
Press Fax.
4
Press Manual Dial. You hear a dial tone.
2
Press Menu, and then Enter when Fax Feature appears on the
bottom line of the display.
5
Enter the receiving fax machine’s number.
3
Press Enter when Lighten/Darken appears.
4
Press the Scroll buttons until the option you want appears and
press Enter.
5
Press Stop/Clear to return to Standby mode.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.2.
6
Press Start when you hear a high-pitched fax signal from the
remote fax machine.
Note
Note
When you want to cancel a fax job, press Stop/Clear at any
time while sending.
The darkness setting is applied to the current fax job. To change
the default setting, see page 10.2.
9.2
<Faxing>
Receiving a fax
Confirming a transmission
When the last page of your original has been sent successfully, the
machine beeps and returns to Standby mode.
Selecting the paper tray
When something goes wrong while sending your fax, an error message
appears on the display. For a list of error messages and their meanings,
see page 14.7. If you receive an error message, press Stop/Clear to
clear the message and try to send the fax again.
After loading the print media for fax output, you have to select the paper
tray you will use for the fax reception.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Paper Setup appears and press
Enter.
Automatic redialing
3
When the number you have dialed is busy or there is no answer when you
send a fax, the machine automatically redials the number every three
minutes, up to seven times according to the factory default settings.
Press the Scroll buttons until Paper Source appears and press
Enter.
4
Press the Scroll buttons until Fax Tray appears and press Enter.
5
Press the Scroll buttons until the paper tray you want appears and
press Enter.
6
Press Stop/Clear to return to Standby mode.
You can set your machine to print a confirmation report automatically
each time sending a fax is completed. For further details, see page 10.1.
When the display shows Retry Redial?, press Enter to redial the number
without waiting. To cancel the automatic redialing, press Stop/Clear.
To change the time interval between redials and the number of redial
attempts. See page 10.1.
Changing receiving modes
Redialing the last number
To redial the number you called last:
1
Press Redial/Pause.
2
When an original is loaded in the ADF, the machine automatically
begins to send.
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press Enter. When you
have finished, select No at the Another Page? prompt.
1
Press Fax.
2
Press Menu until Fax Setup appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Receiving appears and press Enter.
4
Press Enter when Receive Mode appears.
5
Press the Scroll buttons until the fax reception mode you want
appears.
• In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by pressing Manual Dial and
then Start. You can also pick up the handset of the extension
phone and then press the remote receive code. See page 9.4.
• In Ans/Fax mode, an answering machine attached to your
machine answers an incoming call, and the caller can leave a
message on the answering machine. If the fax machine senses a
fax tone on the line, the machine automatically switches to Fax
mode to receive the fax. See page 9.4.
• In DRPD mode, you can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. Distinctive Ring is a telephone
company service which enables an user to use a single telephone
line to answer several different telephone numbers. For further
details, see page 9.4.
6
9.3
Press Enter to save your selection.
<Faxing>
7
Press Stop/Clear to return to Standby mode.
Receiving automatically in Ans/Fax mode
Notes
To use this mode, you must attach an answering machine to the EXT
socket on the back of your machine.
• When the memory is full, the printer can no longer receive any
incoming fax. Secure free memory to resume by removing data
stored in the memory.
• To use the Ans/Fax mode, attach an answering machine to the
EXT socket on the back of your machine.
• If you do not want other people to view your received
documents, you can use secure receiving mode. In this mode,
all of the received faxes are stored in memory. For further
details, see page 9.5.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine detects a fax tone on the
line, it automatically starts to receive the fax.
Notes
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to EXT socket, your machine automatically goes
into Fax mode after a predefined number of rings.
• If your answering machine has a user-selectable ring counter,
set the machine to answer incoming calls within 1 ring.
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.
Receiving automatically in Fax mode
Your machine is preset to Fax mode at the factory. When you receive a
fax, the machine answers the call on a specified number of rings and
automatically receives the fax.
To change the number of rings, see page 10.1.
Receiving faxes using DRPD mode
Receiving manually in Tel mode
Distinctive Ring is a telephone company service which enables a user to
use a single telephone line to answer several different telephone
numbers. The particular number someone uses to call you is identified by
different ringing patterns, which consist of various combinations of long
and short ringing sounds. This feature is often used by answering
services who answer telephones for many different clients and need to
know which number someone is calling in on to properly answer the
phone.
You can receive a fax call by pressing Manual Dial and then pressing
Start when you hear a fax tone from the remote machine.
The machine begins receiving a fax and returns to Standby mode when
the reception is completed.
Receiving manually using an extension
telephone
Using the Distinctive Ring Pattern Detection (DRPD) feature, your fax
machine can learn the ring pattern you designate to be answered by the
fax machine. Unless you change it, this ringing pattern will continue to be
recognized and answered as a fax call, and all other ring patterns will be
forwarded to the extension telephone or answering machine plugged into
the EXT socket. You can easily suspend or change DRPD at any time.
This features works best when you are using an extension telephone
connected to the EXT socket on the back of your machine. You can
receive a fax from someone you are talking to on the extension telephone
without going to the fax machine.
When you receive a call on the extension phone and hear fax tones,
press the keys 9 on the extension phone. The machine receives the
fax.
Before using the DRPD option, Distinctive Ring service must be installed
on your telephone line by the telephone company. To set up DRPD, you
will need another telephone line at your location, or someone available to
dial your fax number from outside.
Press the buttons slowly in sequence. If you still hear the fax tone from
the remote machine, try pressing 9 once again.
To set up the DRPD mode:
9 is the remote receive code preset at the factory. The first and the
last asterisks are fixed, but you can change the middle number to
whatever you wish. For details about changing the code, see page 10.1.
1
Press Fax.
2
Press Menu until Fax Setup appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Receiving appears and press Enter.
4
Press the Scroll buttons until DRPD Mode appears and press
Enter.
Waiting Ring appears on the display.
9.4
<Faxing>
5
Call your fax number from another telephone. It is not necessary to
place the call from a fax machine.
6
When your machine begins to ring, do not answer the call. The
machine requires several rings to learn the pattern.
Printing received faxes
When the machine completes learning, the display shows
Completed DRPD Setup.
1
Access the Secure Receive menu by following steps 1 through 3 in
“Activating secure receiving mode”.
2
Press the Scroll buttons until Print appears and press Enter.
3
Enter the four-digit password and press Enter.
If the DRPD setup fails, Error DRPD Ring appears. Press Enter
when DRPD Mode appears and start over from step 4.
7
The machine prints all of the faxes stored in memory.
Deactivating secure receiving mode
Press Stop/Clear to return to Standby mode.
When the DRPD feature is set up, the DRPD option is available for the
receiving mode setting. To receive faxes in DRPD mode, you need to set
the menu to DRPD.
Notes
• DRPD must be set up again if you re-assign your fax number,
or connect the machine to another telephone line.
• After DRPD has been set up, call your fax number again to
verify that the machine answers with a fax tone. Then have a
call placed to a different number assigned to that same line to
be sure the call is forwarded to the extension telephone or
answering machine plugged into the EXT socket.
1
Access the Secure Receive menu by following steps 1 through 3 in
“Activating secure receiving mode”.
2
Press the Scroll buttons until Off appears and press Enter.
3
Enter the four-digit password and press Enter.
The mode is deactivated and the machine prints all faxes stored in
memory.
4
Press Stop/Clear to return to Standby mode.
Receiving faxes in memory
Receiving in secure receiving mode
Since your machine is a multi-tasking device, it can receive faxes while
you are making copies or printing. If you receive a fax while you are
copying or printing, your machine stores incoming faxes in its memory.
Then, as soon as you finish copying or printing, the machine
automatically prints the fax.
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the machine is unattended. In secure
receiving mode, all incoming faxes go into memory. When the mode is
deactivated, any stored faxes are printed.
Activating secure receiving mode
1
Press Fax.
2
Press Menu and then press Enter when Fax Feature appears on
the bottom line of the display.
3
Press the Scroll buttons until Secure Receive appears and press
Enter.
4
Press the Scroll buttons until On appears and press Enter.
5
Enter a four-digit password you want to use and press Enter.
Note
You can activate secure receiving mode without setting a
password, but cannot protect your faxes.
6
Re-enter the password to confirm it and press Enter.
7
Press Stop/Clear to return to Standby mode.
When a fax is received in secure receiving mode, your machine stores it
in memory and shows Secure Receive to let you know that there is a fax
received.
9.5
<Faxing>
7
Printing received faxes on both sides of paper
The display asks you to enter another fax number to send the
document.
By using the Duplex button on your machine, you can set the machine to
print received faxes on both sides of paper.
1
Press Duplex.
2
Press the Scroll buttons until the binding option you want appears.
Enter the second fax number and press Enter.
8
To enter more fax numbers, press Enter when Yes appears and
repeat steps 6 and 7. You can add up to 209 destinations.
Note
You cannot use group dial numbers for another fax number.
• Off: Prints in Normal mode.
• 1->2Side Short: Prints pages to be read by flipping like a note
pad.
9
• 1->2Side Long: Prints pages to be read like a book.
When you have finished entering fax numbers, select No at the
Another No.? prompt and press Enter or Start.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
2
10 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press Enter.
3
2
3
When you have finished, select No at the Another Page? prompt.
1->2Side Short
The machine begins sending the fax to the numbers you entered in
the order in which you entered them.
5
5
1->2Side Long
3
Press Enter to save your selection.
Sending a delayed fax
If the mode is enabled, the Duplex button is backlit.
You can set your machine to send a fax at a later time when you will not
be present.
Other ways to fax
Sending a fax to multiple destinations
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
You can use the Multiple Send feature, which allows you to send a fax to
multiple locations. Originals are automatically stored in memory and sent
to a remote station. After transmission, the originals are automatically
erased from memory.
3
Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
4
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
5
Press the Scroll buttons until Delay Send appears and press
Enter.
For details about loading an original, see page 5.1.
6
Enter the number of the receiving machine using the number
keypad.
3
4
Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.2.
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
5
Press the Scroll buttons until Multi Send appears and press Enter.
6
Enter the number of the first receiving fax machine and press Enter.
7
Press Enter to confirm the number. The display asks you to enter
another fax number to which to send the document.
8
To enter more fax numbers, press Enter when Yes appears and
repeat steps 6 and 7. You can add up to 10 destinations.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.2.
9.6
<Faxing>
Note
Sending a priority fax
You cannot use group dial numbers for another fax number.
9
Using the Priority Fax feature, a high priority fax can be sent ahead of
reserved operations. The original is scanned into memory and
immediately transmitted when the current operation is finished. In
addition, priority transmission will interrupt a Multiple Send operation
between stations (i.e., when the transmission to station A ends, before
transmission to station B begins) or between redial attempts.
When you have finished entering fax numbers, press the Scroll
buttons to select No at the Another No.? prompt and press Enter.
10 Enter the job name you want and press Enter.
For details on how to enter alphanumeric characters, see page 2.3.
If you do not want to assign a name, skip this step.
11 Enter the time using the number keypad and press Enter or Start.
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Note
For details about loading an original, see page 5.1.
If you set a time earlier than the current time, the fax will be
sent at that time on the following day.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
12 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press Enter.
When you have finished, select No at the Another Page? prompt.
3
Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
4
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
5
Press the Scroll buttons until Priority Send appears and press
Enter.
6
Enter the number of the receiving machine.
The machine returns to Standby mode. The display reminds you
that you are in Standby mode and that a delayed fax is set.
You can use speed buttons or speed dial numbers. For details, see
page 10.2.
Adding pages to a delayed fax
7
Press Enter to confirm the number.
You can add pages to the delayed transmissions previously reserved in
your machine’s memory.
8
Enter the job name you want and press Enter.
1
Load the originals to be added and adjust document settings.
2
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
3
Press Enter when Add Page appears.
4
Press the Scroll buttons until the fax job you want appears and
press Enter.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
9
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press Enter.
When you have finished, select No at the Another Page? prompt.
The machine shows the number being dialed and begins sending
the fax.
The machine scans the original into memory and shows the total
number of pages and the number of the added pages.
Forwarding faxes
Canceling a delayed fax
1
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Cancel Job appears and press Enter.
3
Press the Scroll buttons until the fax job you want appears and
press Enter.
4
Press Enter when Yes appears.
You can forward your incoming and outgoing faxes to another fax
machine or email address.
Forwarding sent faxes to another fax machine
You can set the machine to send copies of all outgoing faxes to a
specified destination, in addition to the fax numbers you entered.
The selected fax is deleted from memory.
9.7
1
Press Fax.
2
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Forward appears and press Enter.
<Faxing>
4
Press Enter when Fax appears.
8
Enter the starting time and press Enter.
5
Press the Scroll buttons until Send Forward appears and press
Enter.
9
Enter the ending time and press Enter.
6
Press the Scroll buttons to select On and press Enter.
7
Enter the number of the fax machine to which faxes are to be sent
and press Enter.
8
Press Stop/Clear to return to Standby mode.
Forwarding received faxes to email address
Subsequent sent faxes will be forwarded to the specified fax
machine.
You can set your machine to forward incoming faxes to the email address
you entered.
10 Press Stop/Clear to return to Standby mode.
Subsequent received faxes will be forwarded to the specified fax
machine.
Forwarding sent faxes to email address
You can set the machine to send copies of all outgoing faxes to a
specified destination, in addition to the email address you entered.
1
Press Fax.
2
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Forward appears and press Enter.
4
Press the Scroll buttons until E-mail appears and press Enter.
5
Press the Scroll buttons until Send Forward appears and press
Enter.
6
Press the Scroll buttons to select On and press Enter.
7
Enter your email address and press Enter.
8
Enter the email address to which faxes are to be sent and press
Enter.
9
Press Stop/Clear to return to Standby mode.
1
Press Fax.
2
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Forward appears and press Enter.
4
Press the Scroll buttons until E-mail appears and press Enter.
5
Press the Scroll buttons until Rcv. Forward appears and press
Enter.
6
Press the Scroll buttons until Forward appears and press Enter.
To set the machine to print out a fax when fax forwarding has been
completed, select Forward&Print.
7
Enter your email address and press Enter.
8
Enter the email address to which faxes are to be sent and press
Enter.
9
Press Stop/Clear to return to Standby mode.
Subsequent received faxes will be forwarded to the specified email
address.
Subsequent sent faxes will be forwarded to the specified email
address.
Sending a Fax from a PC
Forwarding received faxes to another fax machine
You can send a fax from your PC without going to the multi-function
printer. To send a fax from your PC, you need to install the PC-fax
software and customize the software setting’s. See the Software
Section.
You can set your machine to forward incoming faxes to another fax
number during a specified time period. When a fax arrives at your
machine, it is stored in memory. Then, the machine dials the fax number
that you have specified and sends the fax.
1
Press Fax.
Installing PC-Fax Software
2
Press Menu until Fax Feature appears on the bottom line of the
display and press Enter.
1
To install the PC-Fax, insert the supplied Xerox Drivers CD.
3
Press the Scroll buttons until Forward appears and press Enter.
2
4
Press Enter when Fax appears.
The CD-ROM should automatically run, and the installation window
appears.
5
Press the Scroll buttons until Rcv. Forward appears and press
Enter.
3
When the language selection window appears, select the
appropriate language and then click Install Software.
6
Press the Scroll buttons until Forward appears and press Enter.
To set the machine to print out a fax when fax forwarding has been
completed, select Forward&Print.
7
Enter the number of the fax machine to which faxes are to be sent
and press Enter.
9.8
<Faxing>
4
5
To send a PC Fax
Chose PC-Fax (if not already selected) and then click Next.
1
Open the document you want to send.
2
Select Print from the File menu.
The Print window displays. It may look slightly different depending
on your application.
3
Select Xerox PC-Fax from the Name drop down list box.
4
Select OK.
5
Compose the cover page and click Continue.
At the next screen accept your choice by clicking Next and then
click Finish. PC-Fax is now installed.
Configuring PC Fax
1
From the Start menu, select Programs or All Program → Xerox
Phaser 3300MFP → Configure PC Fax.
2
Enter your name and fax number.
3
Select the address book you will use.
4
Select the multi-function printer you will use by choosing Local or
Network.
5
If you select Network, click Browse and search the multi-function
printer you will use.
6
Click OK.
9.9
<Faxing>
6
Enter the recipients’ numbers and click Continue.
Remove a
selected
phone entry
7
Add a new
Phone entry
Select the resolution and click Send Fax.
Your PC begins to send the fax data and multi-function printer sends
the fax.
9.10
<Faxing>
10 Fax setup
Option
This chapter gives you information on setting up your machine for
receiving and sending faxes.
Sent Report
You can set your machine to print a confirmation
report showing whether a transmission was
successful, how many pages were sent, and more.
The available options are On, Off, and On-Error,
which prints only when a transmission is not
successful.
Image TCRb
You can prevent the actual faxed material from being
included in the confirmation report for privacy or
security protection.
Dial Mode
This setting may not be available depending on your
country. If you cannot reach this option, your machine
does not support this feature.
You can set the dial mode for your machine to either
tone dialing or pulse dialing. If you have a public
telephone system or a private branch exchange
(PBX) system, you may need to select Pulse.
Contact your local telephone company if you are not
sure which dial mode to use.
This chapter includes:
•
Changing the fax setup options
•
Changing the default document settings
•
Printing sent fax report automatically
•
Setting up Phone Book
Changing the fax setup options
Your machine provides you with various user-selectable options for
setting up the fax system. You can change the default settings for your
preferences and needs.
To change the fax setup options:
1
Press Fax.
2
Press Menu until Fax Setup appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons to select Sending or Receiving and press
Enter.
4
Press the Scroll buttons until the menu item you want appears and
press Enter.
5
Press the Scroll buttons until the desired status appears or enter
the value for the option you have selected, and press Enter.
6
If necessary, repeat steps 4 through 5.
7
Press Stop/Clear to return to Standby mode.
Note
If you select Pulse, some phone system features
might not be available. It can also take longer to dial
a fax or phone number.
a. Error Correction Mode
b. Transmission Confirmation Report
Receiving options
Option
Sending options
Option
Description
Redial
Times
You can specify the number of redial attempts. If you
enter 0, the machine will not redial.
Redial Term
Your machine can automatically redial a remote fax
machine if it was busy. You can set an interval
between attempts.
Prefix Dial
You can set a prefix of up to five digits. This number
dials before any automatic dial number is started. It is
useful for accessing a PBX exchange.
ECM Modea
This mode helps with poor line quality and makes
sure any faxes you send are sent smoothly to any
other ECM-equipped fax machine. Sending a fax
using ECM may take more time.
Description
10.1
Description
Receive Mode
You can select the default fax receiving mode.
For details on receiving faxes in each mode, see
page 9.3.
Ring to Answer
You can specify the number of times the machine
rings before answering an incoming call.
Stamp Rcv
Name
This option allows the machine to automatically
print the page number, and the date and time of
reception at the bottom of each page of a
received fax.
Rcv Start Code
This code allows you to initiate fax reception from
an extension phone plugged into the EXT socket
on the back of the machine. If you pick up the
extension phone and hear fax tones, enter the
code. It is preset to *9* at the factory.
<Fax setup>
Option
Auto
Reduction
Discard Size
Description
When receiving a fax containing pages as long as
or longer than the paper loaded in the paper tray,
the machine can reduce the size of the original to
fit the size of the paper loaded in the machine.
Turn on this feature if you want to automatically
reduce an incoming page.
With this feature set to Off, the machine cannot
reduce the original to fit onto one page. The
original will be divided and printed in actual size
on two or more pages.
When receiving a fax containing pages as long as
or longer than the paper in your machine, you can
set the machine to discard a specific length from
the end of the received fax. The machine will print
the received fax on one or more sheets of paper,
minus the data that would have been on the
specified discard segment.
Using this feature, the system will not accept
faxes sent from remote stations whose numbers
are stored in the memory as junk fax numbers.
This feature is useful for blocking any unwanted
faxes.
• Add: allows you to set up to 10 fax numbers.
• Delete: allows you to delete the desired junk
fax number.
• Delete All: allows you to delete all junk fax
numbers.
Press the Scroll buttons until Change Default appears and press
Enter.
4
Press Enter when Resolution appears.
5
Press the Scroll buttons until the resolution you want appears and
press Enter.
6
Press the Scroll buttons until Lighten/Darken appears and press
Enter.
7
Press the Scroll buttons until the darkness you want appears and
press Enter.
8
Press Stop/Clear to return to Standby mode.
1
Press Fax.
2
Press Menu until Fax Setup appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Auto Report appears and press
Enter.
4
Press the Scroll buttons until On appears and press Enter.
5
Press Stop/Clear to return to Standby mode.
Setting up Phone Book
You can set up Phone Book with the fax numbers you use most
frequently. Your machine provides you with the following features for
setting up Phone Book:
This mode enables a user to use a single
telephone line to answer several different
telephone numbers. In this menu, you can set the
machine to recognize which ring patterns to
answer. For details about this feature, see
page 9.4.
• Speed buttons
• Speed/Group dial numbers
Note
Before beginning to store fax numbers, make sure that your
machine is in Fax mode.
a. Distinctive Ring Pattern Detection
Speed buttons
Changing the default document settings
The 15 speed buttons on the control panel lets you store frequently-used
fax numbers. You will be able to enter a fax number with the touch of a
button. By utilizing the 16-30 button, you can store up to 30 numbers on
the speed buttons.
The fax options, including resolution and darkness, can be set to the most
frequently used modes. When you send a fax, the default settings are
used if they are not changed by using the corresponding button and
menu.
1
3
You can set the machine to print a report with detailed information about
the previous 50 communication operations, including time and dates.
When you turn on this feature, you can access
the following options to set junk fax numbers.
DRPD Modea
Press Menu until Fax Setup appears on the bottom line of the
display and press Enter.
Printing sent fax report automatically
When the received fax contains pages larger than
the paper in your machine, and Auto Reduction
has been turned on, the machine will reduce the
fax to fit on the existing paper, and nothing will be
discarded.
Junk Fax Setup
2
There are two ways to assign numbers to speed buttons. Examine the
procedures below and use the appropriate way which you prefer:
Press Fax.
10.2
<Fax setup>
Registering after pressing a speed button
5
Enter the name you want and press Enter.
For details on how to enter alphanumeric characters, see page 2.3.
1
Press Fax.
2
Press one of the speed buttons.
6
Enter the fax number you want and press Enter.
3
Press Enter when Yes appears.
7
Press Stop/Clear to return to Standby mode.
4
Enter the name you want and press Enter.
Editing speed dial numbers
For details on how to enter alphanumeric characters, see page 2.3.
1
Press Address Book until New&Edit appears on the bottom line of
the display and press Enter.
2
Press Enter when Speed Dial appears.
3
Enter the speed dial number you want to edit and press Enter.
4
Change the name and press Enter.
5
Change the fax number and press Enter.
6
Press Stop/Clear to return to Standby mode.
5
Enter the fax number you want to store and press Enter.
Registering after entering a number first
1
Press Fax.
2
Enter the fax number you want to store.
3
Press one of the speed buttons.
4
Press Enter when Yes appears.
Using speed dial numbers
Note
If you press a speed button already assigned, the display
asks if you want to overwrite. Press Enter to confirm Yes
and continue. To start over with another speed button,
select No.
5
When you are prompted to enter a destination number while sending a
fax, enter the speed dial number at which you stored the number you
want.
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button on the number keypad.
Enter the name you want and press Enter.
• For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button.
For details on how to enter alphanumeric characters, see page 2.3.
6
Press Enter to confirm the number.
You can also search through memory for an entry by pressing Address
Book. See page 10.4.
Using speed buttons
When you are prompted to enter a fax number while sending a fax:
Group dial numbers
• To retrieve a number from speed buttons 1 to 15, press the
corresponding speed button and press Enter.
If you frequently send the same document to several destinations, you
can group these destinations and set them under a group dial number.
You can then use a group dial number to send a document to all of the
destinations within the group. You can set up to 200 (0 through 199)
group dial numbers using the destination’s existing speed dial numbers.
• To retrieve a number from speed buttons 16 to 30, press 16-30 and
then the corresponding speed button, and press Enter.
Speed dial numbers
Registering a group dial number
You can store up to 240 frequently-used fax numbers in speed dial
numbers.
Registering a speed dial number
1
Press Fax.
2
Press Address Book until New&Edit appears on the bottom line of
the display and press Enter.
1
Press Fax.
3
Press the Scroll buttons until Group Dial appears and press Enter.
2
Press Address Book until New&Edit appears on the bottom line of
the display and press Enter.
4
Enter a group dial number between 0 and 199 and press Enter.
3
Press Enter when Speed Dial appears.
5
Enter a speed dial number and press Enter.
4
Enter a speed dial number between 0 and 239 and press Enter.
6
Press Enter when Yes appears.
7
Repeat steps 5 and 6 to include other speed dial numbers into the
group.
If an entry is already stored in the number you choose, the display
shows the name to allow you to change it. To start over with another
speed dial number, press Exit.
10.3
<Fax setup>
8
When you have finished, press the Scroll buttons to select No at
the Another No.? prompt and press Enter.
9
Press Stop/Clear to return to Standby mode.
Searching with a particular first letter
1
If necessary, press Fax.
2
Press Address Book until Search&Dial appears on the bottom line
of the display and press Enter.
You can delete a specific entry from a group or add a new number to the
selected group.
3
Press the Scroll buttons until the number category you want
appears and press Enter.
1
Press Address Book until New&Edit appears on the bottom line of
the display and press Enter.
4
Press the Scroll buttons until ID appears and press Enter.
5
Enter the first few letters of the name you want and press Enter.
2
Press the Scroll buttons until Group Dial appears and press Enter.
6
3
Enter the group dial number you want to edit and press Enter.
Press the Scroll buttons until the name you want appears and press
Enter.
4
Enter the speed dial number you want to add or delete and press
Enter.
Deleting a Phone Book entry
If you entered a new speed dial number, Add? appears.
You can delete entries in Phone Book one by one.
If you enter a speed dial number stored in the group, Delete?
appears.
1
Press Address Book until Delete appears on the bottom line of the
display and press Enter.
5
Press Enter to add or delete the number.
2
6
Press Enter when Yes appears to add or delete more numbers and
repeat from step 4.
Press the Scroll buttons until the number category you want
appears and press Enter.
3
Press the Scroll buttons until the searching method you want
appears and press Enter.
Editing a group dial number
7
When you have finished, press the Scroll buttons to select No at
the Another No.? prompt and press Enter.
8
Press Stop/Clear to return to Standby mode.
Select Search All to search for an entry by scanning through all
entries in Phone Book.
Select Search ID to search for an entry by the first few letters of the
name.
Using group dial numbers
4
To use a group dial entry, you need to search for and select it from
memory.
Or, enter the first letters and press Enter. Press the Scroll buttons
until the name you want appears and press Enter.
When you are prompted to enter a fax number while sending a fax, press
Address Book. See below.
Searching Phone Book for an entry
There are two ways to search for a number in memory. You can either
scan from A to Z sequentially, or you can search by entering the first
letters of the name associated with the number.
If necessary, press Fax.
2
Press Address Book until Search&Dial appears on the bottom line
of the display and press Enter.
3
Press the Scroll buttons until the number category you want
appears and press Enter.
4
Press Enter when All appears.
5
Press the Scroll buttons until the name and number you want
appears. You can search upwards or downwards through the entire
memory in alphabetical order.
5
Press Enter.
6
Press Enter when Yes appears to confirm the deletion.
7
Press Stop/Clear to return to Standby mode.
Printing Phone Book
Searching sequentially through the memory
1
Press the Scroll buttons until the name you want appears and press
Enter.
You can check your Phone Book settings by printing a list.
10.4
1
Press Address Book until Print appears on the bottom line of the
display.
2
Press Enter. A list showing your speed button settings, and speed
dial and group dial entries prints out.
<Fax setup>
11 Using USB flash memory
Note
There are two USB plug types.
This chapter explains how to use a USB memory device with your
machine.
This chapter includes:
•
About USB memory
•
Plugging in a USB memory device
•
Scanning to a USB memory device
•
Printing from a USB memory device
•
Backing up data
•
Managing USB memory
Insert a USB memory device into the USB memory port on the front of
your machine.
About USB memory
USB memory devices are available with a variety of memory capacities
to give you more room for storing documents, presentations, downloaded
music and videos, high resolution photographs, or whatever other files
you want to store or move.
You can do the following on your machine using a USB memory device:
• Scan documents and save them on a USB memory device.
• Print data stored on a USB memory device.
Cautions
• Back up Address Book/Phone Book entries and the system settings
of your machine.
• Do not remove the USB memory device while the machine is in
operation, or writing to or reading from USB memory. This may
damage your machine.
• If your USB memory device has certain features, such as
security settings and password settings, your machine may not
automatically detect it. For details about these features, see
the device’s User Guide.
• Restore backup files to the machine’s memory.
• Format the USB memory device.
• Check the available memory space.
Plugging in a USB memory device
Scanning to a USB memory device
The USB memory port on the front of your machine is designed for
USB V1.1 and USB V2.0 memory devices. Your machine supports USB
memory devices with capacity of up to 512 MB.
You can scan a document and save the scanned image onto a USB
memory device. There are two ways of doing this: you can scan to the
device using the default settings, or you can customize your own scan
settings.
You must use only an authorized USB memory device with an A plug type
connector.
Scanning
Use only a metal/shielded
USB memory device.
1
Insert a USB memory device into the USB memory port on your
machine.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
11.1
3
Press Scan.
4
Press Enter when Scan to USB appears on the bottom line of the
display.
<Using USB flash memory>
5
Press Enter or Start when USB appears.
Printing from a USB memory device
Your machine begins scanning the original, and then asks if you
want to scan another page.
6
You can directly print files stored on a USB memory device. You can print
TIFF, BMP, JPEG, PDF, and PRN files.
Press Enter when Yes appears to scan more pages. Load an
original and press Start.
Direct Print option supported file types:
• PRN: PCL 6 compatible.
Otherwise, press the Scroll buttons to select No and press Enter.
• PRN files can be created by selecting the Print to file check box when
you print a document. The document will be saved as a PRN file,
rather than printed on paper. Only PRN files created in this fashion
can be printed directly from USB memory.
See the Software Section to learn how to create a PRN file.
After scanning is complete, you can remove the USB memory device
from the machine.
Customizing Scan to USB
You can specify image size, file format, or color mode for each scanning
to USB job.
• BMP: BMP Uncompressed
1
Press Scan.
• JPEG: JPEG Baseline
2
Press Menu until Scan Feature appears on the bottom line of the
display and press Enter.
3
Press Enter when USB Memory appears.
4
Press the Scroll buttons until the setting option you want appears
and press Enter.
• TIFF: TIFF 6.0 Baseline
• PDF: PDF 1.4 and below
To print a document from a USB memory device:
1
Your machine automatically detects the device and reads data
stored on it.
You can set the following options:
2
• Scan Size: Sets the image size.
• Original Type: Sets the original document’s type.
• Scan Color: Sets the color mode.
3
• Scan Format: Sets the file format in which the image is to be
saved. When you select TIFF or PDF, you can select to scan
multiple pages.
Press the Scroll buttons until the desired status appears and press
Enter.
6
Repeat steps 4 and 5 to set other setting options.
7
When you have finished, press Stop/Clear to return to Standby
mode.
Press the Scroll buttons until the folder or file you want appears and
press Enter.
If you see D in the front of a folder name, there are one or more
folders in the selected folder.
• Resolution: Sets the image resolution.
5
Insert a USB memory device into the USB memory port on your
machine. If one has already been inserted, press USB Print.
If you selected a file, skip to the next step.
If you selected a folder, press the Scroll buttons until the file you
want appears.
4
Press Enter, Start, or USB Print to start printing the selected file.
5
If you selected a TIFF, BMP, or JPEG file in step 2, press the Scroll
buttons to select the number of copies to be printed or enter the
number and press Enter.
After printing the file, the display asks if you want to print another
job.
6
Press Enter when Yes appears to print another job, and repeat from
step 2.
Otherwise, press the Scroll buttons to select No and press Enter.
7
11.2
Press Stop/Clear to return to Standby mode.
<Using USB flash memory>
Printing on both sides of paper
Restoring data
By using the Duplex button on your machine, you can set the machine to
print documents on both sides of paper.
1
Insert the USB memory device on which the backup data is stored in
to the USB memory port.
1
Press Duplex.
2
2
Press the Scroll buttons until the binding option you want appears.
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
• Off: Prints in Normal mode.
3
Press Enter when Machine Setup appears.
• 1->2Side Short: Prints pages to be read by flipping like a note
pad.
4
Press the Scroll buttons until Import Setting appears and press
Enter.
5
Press the Scroll buttons until the data type you want appears and
press Enter.
6
Press the Scroll buttons until the file containing the data you want to
restore appears and press Enter.
7
Press Enter when Yes appears to restore the backup file to the
machine.
8
Press Stop/Clear to return to Standby mode.
• 1->2Side Long: Prints pages to be read like a book.
2
3
2
5
3
5
1->2Side Long
3
1->2Side Short
Press Enter to save your selection.
Managing USB memory
If the mode is enabled, the Duplex button is backlit.
You can delete image files stored on a USB memory device one by one
or all at once by reformatting the device.
Backing up data
Caution
After deleting files or reformatting a USB memory device, files
cannot be restored. Therefore, confirm that you no longer need
the data before deleting it.
Data in the machine’s memory can be accidentally erased due to power
failure or storage failure. Backup helps you protect your Address Book/
Phone Book entries and the system settings by storing them as backup
files on a USB memory device.
Deleting an image file
Backing up data
1
Insert the USB memory device into the USB memory port on your
machine.
2
Press Scan.
1
Insert the USB memory device into the USB memory port on your
machine.
2
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
3
Press Enter when Scan to USB appears on the bottom line of the
display.
3
Press Enter when Machine Setup appears.
4
4
Press the Scroll buttons until Export Setting appears and press
Enter.
Press the Scroll buttons until File Manage appears and press
Enter.
5
Press Enter when Delete appears.
5
Press the Scroll buttons until the option you want appears.
6
Press the Scroll buttons until the folder or file you want appears and
press Enter.
• Address Book: Backs up all Address Book/Phone Book entries.
6
• Setup Data: Backs up all system settings.
Note
Press Enter to begin backing up the data.
If you see D in the front of a folder name, there are one or
more folders in the selected folder.
The data is backed up to the USB memory.
7
If you selected a file, the display shows the size of the file for about
2 seconds. Go to the next step.
Press Stop/Clear to return to Standby mode.
11.3
<Using USB flash memory>
If you selected a folder, press the Scroll buttons until the file you
want to delete appears and press Enter.
7
Press Enter when Yes appears to confirm your selection.
8
Press Stop/Clear to return to Standby mode.
Formatting a USB memory device
1
Insert the USB memory device into the USB memory port on your
machine.
2
Press Scan.
3
Press Enter when Scan to USB appears on the bottom line of the
display.
4
Press the Scroll buttons until File Manage appears and press
Enter.
5
Press the Scroll buttons until Format appears and press Enter.
6
Press Enter when Yes appears to confirm your selection.
7
Press Stop/Clear to return to Standby mode.
Viewing the USB memory status
You can check the amount of memory space available for scanning and
saving documents.
1
Insert the USB memory device into the USB memory port on your
machine.
2
Press Scan.
3
Press Enter when Scan to USB appears on the bottom line of the
display.
4
Press the Scroll buttons until Check Space appears and press
Enter.
The available memory space appears on the display.
5
Press Stop/Clear to return to the Standby mode.
11.4
<Using USB flash memory>
12 Ordering supplies and
Accessories
accessories
You can purchase and install accessories to enhance your machine’s
performance and capacity.
This chapter provides information on purchasing print cartridges and
accessories available for your machine.
The following accessories are available for your machine:
Print cartridges
Accessory
Description
Optional tray
If you are experiencing
frequent paper supply
problems, you can
attach an additional 250
sheet tray. You can print
documents on various
sizes and types of print
materials.
097N01693
Memory
DIMM
Extends your machine’s
memory capacity.
• 256 MB: 097S03761
When the toner runs out, you can order the following types of print
cartridges for your machine:
Type
Yielda
Part number
Standard yield
4,000 pages
106R01411
High yield
8,000 pages
106R01412
Part number
a. Declared yield value in accordance with ISO/IEC 19752.
Note
The Phaser 3300MFP comes with 64 MB of on-board memory
and a 32 MB DIMM. To expand the memory of your machine,
you must remove the existing DIMM and purchase a larger one.
How to purchase
To order Xerox-authorized supplies or accessories, contact your local
Xerox dealer or the retailer where you purchased your machine, or visit
www.xerox.com/office/support and select your product name or
number for information on calling for technical support.
12.1
<Ordering supplies and accesso-
13 Maintenance
Report/List
This chapter provides information for maintaining your machine and the
print cartridge.
This chapter includes:
•
Printing reports
•
Clearing memory
•
Cleaning your machine
•
Maintaining the print cartridge
•
Maintenance Parts
•
Managing your machine from the website
•
Checking the machine’s serial number
Your machine can provide various reports with useful information you will
need. The following reports are available:
Configuration
Address Book
Send Report
This list shows information on your machine’s
network connection and configuration.
NetScan Report
This report shows information for the Network
Scan records including IP address, time and
date, the number of pages scanned, and results.
This report is automatically printed every
50 network scan jobs.
User Auth List
This list shows authorized users who are allowed
to use the email function.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Report appears and press Enter.
3
Press the Scroll buttons until the report or list you want to print
appears and press Enter.
To print all reports and lists, select All Report.
Description
4
This list shows the status of the user-selectable
options. You may print this list to confirm your
changes after changing settings.
Press Enter when Yes appears to confirm printing.
The selected information prints out.
Other available reports
This list shows all of the fax numbers and email
addresses currently stored in the machine’s
memory.
Your machine prints the following reports automatically or depending on
your setting.
This report shows the fax number, the number of
pages, the elapsed time of the job, the
communication mode, and the communication
results for a particular fax job.
• Multi-communication Report: prints automatically after sending
faxes from more than one location.
• Power Failure Report: prints out automatically when power is
restored after a power failure if any data loss occurs due to the power
failure.
You can set up your machine to automatically
print a transmission confirmation report after
each fax job. See page 10.1.
Sent Report
Network Info.
Printing a report
Printing reports
Report/List
This report shows information on the faxes and
emails you have recently sent.
You can set the machine to automatically print
this report every 50 communications. See
page 10.2.
Fax Rcv Report
This report shows information on the faxes you
have recently received.
Schedule Jobs
This list shows the documents currently stored
for delayed faxes along with the starting time and
type of each operation.
JunkFax Report
This list shows the fax numbers specified as junk
fax numbers. To add or delete numbers to or
from this list, access the Junk Fax Setup menu.
Description
13.1
<Maintenance>
Clearing memory
Cleaning your machine
You can selectively clear information stored in your machine’s memory.
To maintain print and scan quality, follow the cleaning procedures below
each time the print cartridge is replaced or if print and scan quality
problems occur.
Caution
Before clearing the memory, make sure that all fax jobs have
been completed, or you will lose those jobs.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Clear Setting appears and press
Enter.
3
Press the Scroll buttons until the item you want to clear appears.
Options
Caution
Cleaning the cabinet of the machine with cleaning materials
containing large amounts of alcohol, solvent, or other strong
substances can discolor or distort the cabinet.
Cleaning the outside
Clean the cabinet of the machine with a soft lint-free cloth. You can
dampen the cloth slightly with water, but be careful not to let any water
drip onto or into the machine.
Description
All Settings
Clears all of the data stored in memory and
resets all of your settings to the factory default.
Cleaning the inside
Fax Setup
Restores all of the fax options to the factory
default.
Copy Setup
Restores all of the copy options to the factory
default.
During the printing process, paper, toner, and dust particles can
accumulate inside the machine. This buildup can cause print quality
problems, such as toner specks or smearing. Cleaning the inside of the
machine clears or reduces these problems.
Scan Setup
Restores all of the scan options to the factory
default.
System Setup
Restores all of the system options to the
factory default.
Network
Restores all of the network options to the
factory default.
Address Book
Clears all of the fax number and email address
entries stored in memory.
Sent Report
Clears all records of sent faxes and emails.
Fax Rcv
Report
Clears all records of received faxes.
NetScan
Report
Clears the information on network scan
sessions in memory.
4
Press Enter when Yes appears.
5
Press Enter again to confirm clearing.
6
Repeat steps 3 through 5 to clear another item.
7
Press Stop/Clear to return to Standby mode.
1
Turn the machine off and unplug the power cord. Wait for the
machine to cool down.
2
Open the front cover and pull the print cartridge out. Set it on a clean
flat surface.
Cautions
• To prevent damage to the print cartridge, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the print cartridge.
Use the handle on the cartridge to avoid touching this area.
13.2
<Maintenance>
3
Cleaning the scan unit
With a dry lint-free cloth, wipe away any dust and spilled toner from
the print cartridge area and the print cartridge cavity.
Keeping the scan unit clean helps ensure the best possible copies. We
suggest that you clean the scan unit at the start of each day and during
the day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with water.
2
Open the scanner lid.
3
Wipe the surface of the scanner glass and ADF glass until it is clean
and dry.
1
3
2
Caution
4
While cleaning the inside of the machine, be careful not to touch
the transfer roller, located underneath the print cartridge. Oil
from your fingers can cause image quality problems.
4
Locate the long strip of glass (LSU) inside the top of the cartridge
compartment, and gently swab the glass to see if dirt turns the white
cotton black.
1
2
3
4
5
Reinsert the print cartridge and close the front cover.
6
Plug in the power cord and turn the machine on.
white sheet
ADF glass
scanner lid
scanner glass
4
Wipe the underside of the scanner lid and white sheet until it is
clean and dry.
5
Close the scanner lid.
Maintaining the print cartridge
Print cartridge storage
To get the most from the print cartridge, keep the following guidelines in
mind:
• Do not remove the print cartridge from its package until ready for use.
• Do not refill the print cartridge. The machine warranty does not cover
damage caused by using a refilled cartridge.
• Store print cartridges in the same environment as your machine.
• To prevent damage to the print cartridge, do not expose it to light for
more than a few minutes.
13.3
<Maintenance>
Expected cartridge life
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
The life of the print cartridge depends on the amount of toner that print
jobs require. When printing text at ISO 19752 5% coverage, a new print
cartridge lasts an average of either 8,000 or 4,000 pages. (The original
print cartridge supplied with the machine lasts an average of 4,000
pages.) The actual number may also be different depending on the print
density of the pages you print on, and the number of pages may be
affected by operating environment, printing interval, media type, and
media size. If you print a lot of graphics, you may need to change the
cartridge more often.
Caution
Do not touch the green underside of the print cartridge. Use
the handle on the cartridge to avoid touching this area.
4
Hold the print cartridge by the handle and slowly insert the cartridge
into the opening in the machine.
Tabs on the sides of the cartridge and corresponding grooves within
the machine will guide the cartridge into the correct position until it
locks into place completely.
Redistributing toner
When the print cartridge is near the end of its life:
• White streaks or light printing occurs.
• Toner Low appears on the display.
If this happens, you can temporarily reestablish print quality by
redistributing the remaining toner in the cartridge. In some cases, white
streaks or light printing will still occur even after you have redistributed the
toner.
1
Open the front cover.
2
Pull the print cartridge out.
5
3
Close the front cover. Make sure that the cover is securely closed.
Thoroughly roll the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
Replacing the print cartridge
When the print cartridge is completely empty:
• Toner Empty appears on the display.
• The machine stops printing. Incoming faxes are saved in memory.
At this stage, the print cartridge needs to be replaced. For order
information for print cartridges, see page 12.1.
13.4
<Maintenance>
Cleaning the drum
Note
You can set the machine to disregard the Toner Empty
message and to continue printing. See page 13.5.
1
Open the front cover.
2
Pull the print cartridge out.
If there are streaks or spots on your print, the OPC drum of the print
cartridge may require cleaning.
1
Before starting the cleaning procedure, make sure that paper is
loaded in the machine.
2
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
3
Press the Scroll buttons until Maintenance appears and press
Enter.
4
Press Enter when Clean Drum appears.
The machine prints out a cleaning page. Toner particles on the drum
surface are affixed to the paper.
If the problem remains, repeat steps 1 through 4.
Printing continuously when the Toner Empty
message appears
3
Remove the new print cartridge from its bag.
4
Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.
When the print cartridge is nearly empty, the machine shows the Toner
Empty message and stops printing. You can set the machine to disregard
this message when it appears and to continue printing, even though print
quality is not optimal.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Maintenance appears and press
Enter.
3
Press the Scroll buttons until Ignore Toner appears and press
Enter.
4
Press the Scroll buttons until the desired status appears and press
Enter.
If you select off, the received fax cannot be printed until you install a
new print cartridge. However, faxes can be received into memory as
long as it allows
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
5
Note
Press Stop/Clear to return to Standby mode.
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
Caution
Do not touch the green underside of the print cartridge. Use
the handle on the cartridge to avoid touching this area.
5
Hold the print cartridge by the handle and slowly insert the cartridge
into the opening in the machine.
Tabs on the sides of the cartridge and corresponding grooves within
the machine will guide the cartridge into the correct position until it
locks into place completely.
6
Close the front cover. Make sure that the cover is securely closed.
13.5
<Maintenance>
Clearing the Toner Empty Replace Toner message
Checking replaceables
When the Toner Empty Replace Toner message appears you can
configure not to see this message again not to disturb you.
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed or scanned. Replace the
corresponding parts, if necessary.
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Maintenance appears and press
Enter.
3
Press the Scroll buttons until CLR Empty Msg. appears and press
Enter.
4
Select On and press Enter.
5
Now the Toner Empty Replace Toner message does not appear
but the Replace Toner message will remain for reminding you that
the new cartridge needs to be installed for quality.
The following information is available for checking the replaceable
elements of your machine:
• Total: displays the total number of pages printed.
• Toner: displays how much toner remains in the cartridge.
• Drum: displays the number of pages printed.
• Platen Scan: displays the number of pages scanned using the
scanner glass.
Note
While the following messages are appearing on the display, the
sub-menu(s) under Supplies Life can be changed:
Caution
-
Once you have selected On, this setting will be permanently
written to the memory of the print cartridge, and this menu will
be removed from the Maintenance menu.
To check the replaceables:
Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the life
span of each item has expired.
Items
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Maintenance appears and press
Enter.
3
Press the Scroll buttons until Supplies Life appears and press
Enter.
4
Press the Scroll buttons until the item you want appears and press
Enter.
5
If you selected to print a supply information page, press Enter to
confirm.
6
Press Stop/Clear to return to Standby mode.
Yield (Average)
ADF rubber pad
Approx. 20,000 pages
Transfer roller
Approx. 70,000 pages
Fuser unit
Approx. 80,000 pages
Tray rubber pad
Approx. 250,000 pages
Pickup roller
Approx. 150,000 pages
Invalid Toner
NonGenuine Toner
Replace Toner
Toner Exhausted
Xerox highly recommends that an authorized service provider, dealer or
the retailer where you bought printer performs this maintenance activity.
13.6
<Maintenance>
Replacing the ADF rubber pad
5
Align the left end of the ADF roller with the slot and push the right
end of the roller into the right slot. Rotate the bushing on the right
end of the roller toward the document input tray.
6
Close the ADF cover.
You will need to replace the ADF rubber pad when there seems to be a
consistent problem with paper pickup or when its specified yield is
reached.
1
Open the ADF cover.
2
Rotate the bushing on the right end of the ADF roller toward the
ADF and remove the roller from the slot.
1
2
1
2
3
bushing
Managing your machine from the website
ADF roller
If you have connected your machine to a network and set up TCP/IP
network parameters correctly, you can manage the machine via Xerox’s
CentreWare IS, an embedded web server. Use CentreWare IS to:
Remove the ADF rubber pad from the ADF, as shown.
• View the machine’s device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer properties.
1
• Set the machine to send email notifications to let you know the
machine’s status.
• Get support for using the machine.
To access CentreWare IS:
1
Start a web browser, such as Internet Explorer, from Windows.
2
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address
field and press the Enter key or click Go.
Your machine’s embedded website opens.
1
4
ADF rubber pad
Insert a new ADF rubber pad into place.
13.7
<Maintenance>
Checking the machine’s serial number
When you call for service or register as a user on the Xerox website, the
machine’s serial number may be required.
You can check the serial number by taking the following steps:
1
Press Menu until System Setup appears on the bottom line of the
display and press Enter.
2
Press the Scroll buttons until Maintenance appears and press
Enter.
3
Press the Scroll buttons until Serial Number appears and press
Enter.
4
Check your machine’s serial number.
5
Press Stop/Clear to return to Standby mode.
13.8
<Maintenance>
14 Troubleshooting
3
Pull the jammed paper gently out of the ADF.
This chapter gives helpful information for what to do if you encounter an
error.
This chapter includes:
•
Clearing document jams
•
Clearing paper jams
•
Understanding display messages
•
Print cartridge-related messages
•
Solving other problems
Clearing document jams
When an original jams while passing through the ADF, Document Jam
appears on the display.
Note
If you do not see the paper in this area, refer to Roller misfeed.
See page 14.2.
Caution
To avoid tearing the document, pull out the jammed document
gently and slowly.
1
Remove any remaining pages from the ADF.
2
Open the ADF cover.
4
Close the ADF cover. Then load the removed pages, if any, back into
the ADF.
1
1
Note
ADF cover
To prevent document jams, use the scanner glass for thick, thin, or
mixed paper-type originals.
14.1
<Troubleshooting>
Roller misfeed
In tray 1
1
Open the scanner lid.
1
2
Grasp the misfed paper, and remove the paper from the feed area
Open and close the front cover. The jammed paper is automatically
ejected from the machine.
If the paper does not exit, go to the next step.
by carefully pulling it to the right using both hands.
2
Pull tray 1 open.
3
Remove the jammed paper by gently pulling it straight out.
1
1
3
scanner lid
Close the scanner lid. Then load the removed pages back into the
ADF.
Clearing paper jams
When a paper jam occurs, Paper Jam appears on the display. Refer to
the table below to locate and clear the paper jam.
Message
Location of jam
Go to
[Paper Jam 0]
Open/Close Door
In the paper feed area (tray 1,
optional tray 2, or multipurpose tray)
below and
page 14.3
[Paper Jam 1]
Open/Close Door
In the fuser area or around the
print cartridge
page 14.3
[Paper Jam 2]
Check Inside
In the paper exit area
page 14.4
[Duplex Jam 0]
Check Inside
In the duplex unit
page 14.5
[Duplex Jam 1]
Check Inside
Between the duplex unit and
fuser area
If the paper does not move when you pull, or if you do not see the
paper in this area, check the fuser area around the print cartridge.
See page 14.3.
4
page 14.6
Insert tray 1 into the machine until it snaps into place. Printing
automatically resumes.
Caution
To avoid tearing the paper, pull out the jammed paper gently
and slowly. Follow the instructions in the following sections to
clear the jam.
14.2
<Troubleshooting>
In the optional tray 2
In the multi-purpose tray
1
Pull the optional tray 2 open.
1
2
Remove the jammed paper from the machine.
If the paper is not feeding properly, remove and reload the paper into
the machine.
2
Open and close the front cover to resume printing.
If the paper does not move when you pull, or if you do not see the
paper in this area, stop and go to step 3.
3
Pull the tray 1 half.
4
Pull the paper straight up and out.
In the fuser area or around the print cartridge
Note
The fuser area is hot. Take care when removing paper from the
machine.
1
5
Open the front cover and pull the print cartridge out, lightly pushing it
down.
Insert the trays back into the machine. Printing automatically resumes.
14.3
<Troubleshooting>
2
Remove the jammed paper by gently pulling it straight out.
4
If you see the jammed paper, push the pressure lever on each side up
and remove the paper. Skip to step 9.
1
3
Replace the print cartridge and close the front cover. Printing
automatically resumes.
1
If you still do not see the paper, go to the next step.
In the paper exit area
1
Open and close the front cover. The jammed paper is automatically
ejected from the machine.
2
Gently pull the paper out of the output tray.
pressure lever
5
Release the white strip, the rear cover stopper, and fully open the rear
cover, as shown.
1
2
If you do not see the jammed paper or if there is any resistance when
you pull, stop and go to the next step.
3
Open the rear cover.
14.4
<Troubleshooting>
1
2
rear cover stopper
rear cover
6
8
Unfold the duplex guide fully.
Pull the jammed paper out.
If the jammed paper does not move when you pull, push the pressure
lever on each side up to loosen the paper, and then remove it.
1
1
1
7
duplex guide
While pushing the fuser lever to the right, open the fuser door.
1
9
pressure lever
Return the lever, door, stopper, and guide to their original position.
10 Close the rear cover. Printing automatically resumes.
In the duplex unit area
If the duplex unit is not inserted correctly, paper jams may occur. Make sure
that the duplex unit is inserted correctly.
Duplex Jam 0
1
1
2
1
2
Pull the duplex unit out of the machine.
fuser lever
fuser door
1
1
14.5
<Troubleshooting>
duplex unit
2
Remove the jammed paper from the duplex unit.
3
Pull the jammed paper out.
If the paper does not come out with the duplex unit, remove the paper
from the bottom of the machine.
Tips for avoiding paper jams
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, follow the steps outlined on page 14.2.
• Follow the procedures on page 5.5. Ensure that the adjustable guides
are positioned correctly.
• Do not overload the tray. Ensure that the paper level is below the paper
capacity mark on the inside wall of the tray.
• Do not remove paper from the tray while your machine is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
Duplex Jam 1
• Use only recommended print media. See page 5.8.
1
Open the rear cover.
• Ensure that the recommended print side of print media is facing down in
the tray, or facing up in the multi-purpose tray.
2
Unfold the duplex guide fully.
• If paper jams occur frequently when you print on A5-sized paper:
Load the paper into the tray with the long edge facing the front of the tray.
1
1
In the printer properties window, set the page orientation to be rotated 90
degrees. See the Software Section.
duplex guide
14.6
<Troubleshooting>
Understanding display messages
Message
Meaning
Suggested solutions
Duplex Jam 0
Check Inside
Paper has jammed
during duplex
printing.
Clear the jam. See page
14.5.
Note
Duplex Jam 1
Open/Close Door
Clear the jam. See page
14.6.
When you call for service, it is very convenient to tell the service
representative the display message.
Paper has jammed
during duplex
printing.
Enter Again
You entered an
unavailable item.
Enter the correct item
again.
File Access
Denied
Login to the network
server was
successful.
However, access to
the file on the
network server was
denied.
Change the server
settings.
File Name Exist
The file name you
have entered
already exists.
Enter a different file
name.
File Name Over
Limit
The file names you
can use are from
doc001 to doc999.
However, all file
names are used
already.
Delete unnecessary files.
The selected file
format is not
supported.
Use the correct file
format.
Messages appear on the Status Monitor program window or the control
panel display to indicate the machine’s status or errors. Refer to the tables
below to understand the messages’ meaning and correct the problem if
necessary. Messages and their meanings are listed in alphabetical order.
Message
Meaning
Suggested solutions
Authentication
Failure
The ID or password
you entered is
incorrect.
Enter the correct ID or
password.
Cancel?
Your machine’s
memory has
become full while
trying to store an
original into memory.
To cancel the fax job,
press the Enter button to
accept Yes.
Yes
[COMM. Error]
If you want to send those
pages that have been
successfully stored,
press the Enter button to
accept No. You should
send the remaining
pages later, when
memory is available.
The machine has a
communication
problem.
Ask the sender to try
again.
File Format
Connection Error
Connection with the
SMTP server failed.
Check the server settings
and the network cable.
Fuser Door Open
The fuser door is not
securely latched.
Connection Failed
The protocol you
have entered is not
supported or server
port is wrong.
Check the protocol or
server port.
Open the rear cover and
close the fuser door until
it locks into place.
For the location of the
fuser door, see
page 14.5.
Data Read Fail
Check USB Mem.
Time expired while
reading data.
Try again.
Global Address
Not Found
Check the search ID.
Data Write Fail
Check USB Mem.
Storing to the USB
memory failed.
Check the available USB
memory space.
When the device is
unable to locate the
given address of the
Global server.
Document Jam
The loaded original
has jammed in the
ADF.
Clear the jam. See page
14.1.
Global Query Size
Exceeded
This is an error
message and
displays when the
global query size
has been exceeded.
Door Open
The front cover or
rear cover is not
securely latched.
Close the cover until it
locks into place.
• There are too many
search results. Refine
your search by
entering more letters.
• Contact a LDAP Server
administrator.
Not Supported
14.7
<Troubleshooting>
Message
Meaning
Suggested solutions
Global Server
Auth Failed
When there is an
authentication fail
while connecting to
the global server this
message displays.
Check the authentication
account and password.
Global Server
Comm. Error
This error message
displays when there
is a communication
error between the
global server and
the device.
• Try again.
• Contact a LDAP Server
administrator.
Global Server Not
Configured
When no global
server is configured,
this message
displays.
Check the LDAP server
configuration settings.
Global Server Not
Found
When the device is
unable to find the
Global server.
Check the LDAP server
address, The LDAP
server address is
incorrect, or the server
has failed.
Group Not
Available
You have tried to
select a group
location number
where only a single
location number can
be used, such as
when adding
locations for a
Multiple Send
operation.
Use a speed dial number
or dial a number
manually using the
number keypad.
The machine has
received a fax from
which is registered
as a junk fax.
The received fax data will
be deleted.
The server address
you have entered is
invalid.
Enter the correct server
address.
Line Busy
The receiving fax
machine did not
answer or the line is
already engaged.
Try again after a few
minutes.
[Line Error]
Your machine
cannot connect with
the receiving fax
machine or has lost
contact because of a
problem with the
phone line.
Try again. If the problem
persists, wait an hour or
so for the line to clear
and try again.
[Incompatible]
Invalid Server
Address
Message
Or, turn the ECM mode
on. See page 10.1.
14.8
Suggested solutions
Low Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power cord
and plug it back in. If the
problem persists, please
call for service.
LSU Motor Error
Cycle Power
A problem has
occurred in the LSU
(Laser Scanning
Unit).
Unplug the power cord
and plug it back in. If the
problem persists, please
call for service.
LSU Hsync Error
Cycle Power
A problem has
occurred in the LSU
(Laser Scanning
Unit).
Unplug the power cord
and plug it back in. If the
problem persists, please
call for service.
Main Motor
Locked
There is a problem
in the main motor.
Open and then close the
front cover.
Mail Exceeds
Server Support
The mail size is
larger than the
supported size by
SMTP server.
Divide your mail or
reduce the resolution.
Memory Full
The memory is full.
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission into
more than one operation.
MP Tray
There is no paper in
the multi-purpose
tray.
Load paper in the multipurpose tray. See page
5.7.
Network Error
There is a problem
with the network.
Contact your network
administrator.
[No Answer]
The receiving fax
machine has not
answered after
several redial
attempts.
Try again. Make sure that
the receiving machine is
operational.
Not Assigned
The speed button or
speed dial number
you tried to use has
no number or email
address assigned to
it.
Enter the number or
email address manually
using the number keypad
or store the number or
address.
[No Paper]
Add Paper
The paper in the tray
has run out.
Load paper in the tray.
See page 5.5.
One Page is
Too Large
Single page data
exceeds the
configured mail size.
Reduce the resolution
and try again.
Paper Empty
Reconfirm junk fax setup,
see page 10.2.
Meaning
<Troubleshooting>
Message
Open Heat Error
Cycle Power
Meaning
There is a problem
in the fuser unit.
Suggested solutions
Message
Unplug the power cord
and plug it back in. If the
problem persists, please
call for service.
Send Error
(DNS)
Send Error
Meaning
Suggested solutions
There is a problem
in DNS.
Configure the DNS
setting.
Configure the POP3
setting.
Operation Not
Assigned
You are in the Add
Page/Cancel Job
operation, but there
are no jobs stored.
Check the display to see
if there are any
scheduled jobs.
(POP3)
There is a problem
in POP3.
Send Error
(SMTP)
There is a problem
in SMTP.
Change to the available
server.
Over Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power cord
and plug it back in. If the
problem persists, please
call for service.
Send Error
(Wrong Config)
There is a problem
on the network
interface card.
Configure your network
interface card correctly.
[Stop Pressed]
Paper has jammed
in the feeding area
of the tray.
Clear the jam. See page
14.2 and page 14.3.
Stop/Clear has
been pressed during
a fax transmission.
Try again.
Paper Jam 0
Open/Close Door
Paper Jam 1
Open/Close Door
Paper has jammed
in the fuser area.
Clear the jam. See page
14.3.
Tray 1
Paper Empty
There is no paper in
the tray 1.
Load paper in tray 1. See
page 5.5.
Paper Jam 2
Check Inside
Paper has jammed
in the paper exit
area.
Clear the jam. See page
14.4.
Tray 2
Paper Empty
There is no paper in
the optional tray 2.
Load paper in the
optional tray 2. See page
5.5.
Power Failure
Power has turned off
then on and the
machine’s memory
has not been back
up.
The job which you were
trying to do before the
power failure must be
completely re-done.
Retry Redial?
The machine is
waiting for a
specified time
interval to redial a
previously busy
station.
You can press Enter to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Scanner locked
The scanner module
is locked
Unlock the scanner and
press Stop/Clear.
Self Diagnostic
LSU
The LSU (Laser
Scanning Unit) in
your printer is
checking some
problems detected.
Please wait a few
minutes.
Self Diagnostic
Temperature
The engine in your
machine is checking
some problems
detected.
Please wait a few
minutes.
Send Error
(AUTH)
There is a problem
in SMTP
authentication.
Configure the
authentication setting.
14.9
<Troubleshooting>
Print cartridge-related messages
Message
Meaning
Suggested solutions
Install Toner
A print cartridge is not installed.
Install a print cartridge.
Invalid Toner
The print cartridge you have
installed is not for your printer.
Install a Xerox-genuine print cartridge, designed for your printer.
Toner Low
The print cartridge is almost
empty.
Take out the print cartridge and thoroughly shake it. By doing this, you can temporarily
reestablish printing operations.
NonGenuine Toner
The print cartridge installed is not
a genuine cartridge.
You can select either Stop or Continue. If you do not select any, the printer will work as if
Stop is selected.
If you select Stop, you cannot print until the genuine cartridge is installed. However, you
can still print any kind of reports.
If you select Continue, you can keep printing but the quality cannot be guaranteed, and the
product support is no longer provided.
If you want to change the selection, turn the printer off and on to have this message appear
again, and then re-select Stop or Continue.
Stop
NonGenuine Toner
The print cartridge installed is not
a genuine cartridge.
Install a genuine print cartridge.
Replace Toner
The print cartridge installed is not
a genuine cartridge.
Install a genuine print cartridge.
Toner Empty
Replace Toner
The toner in the cartridge has run
out.
Install a new genuine print cartridge.
You can keep printing but the quality cannot be guaranteed, and the product support is no
longer provided.
You can configure not to see the Toner Empty Replace Toner message. See page 13.6.
Replace Toner
The toner in the cartridge has run
out.
This message appears when you turned off the Toner Empty Replace Toner message.
See page 13.6.
Replace Toner1
NonGenuine Toner
This message appears when you selected Stop at the NonGenuine Toner prompt.
This message appears when you selected Continue at the NonGenuine Toner prompt.
Install a new genuine print cartridge.
You can keep printing but the quality cannot be guaranteed, and the product support is no
longer provided.
Toner Exhausted
Stop
The lifespan of the print cartridge
is reached.
You can select either Stop or Continue. If you do not select any, the printer will work as if
Stop is selected.
If you select Stop, you cannot print until a genuine print cartridge is installed.
If you select Continue, you can keep printing but the quality cannot be guaranteed, and the
product support is no longer provided.
If you want to change the selection, turn the printer off and on to have this message appear
again, and then re-select Stop or Continue.
Toner Exhausted
Replace Toner1
The lifespan of the print cartridge
is reached.
This message appears when you selected Stop at the Toner Exhausted prompt.
Install a genuine print cartridge.
Toner Exhausted
The lifespan of the print cartridge
is reached.
Install a genuine print cartridge.
Replace Toner
This message appears when you selected Continue at the Toner Exhausted prompt.
14.10
<Troubleshooting>
Solving other problems
The following chart lists some conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem
is corrected. If the problem persists, please call for service.
Paper feeding problems
Condition
Clear the paper jam. See page 14.2.
Paper sticks
together.
• Ensure that there is not too much paper in the tray.
The tray can hold up to 250 sheets of paper,
depending on the thickness of your paper.
• Make sure that you are using the correct type of
paper. See page 5.8.
• Remove paper from the tray and flex or fan the
paper.
• Humid conditions may cause some paper to stick
together.
Paper does not
feed into the
machine.
The paper keeps
jamming.
Condition
The
machine
does not
print.
Suggested solutions
Paper is jammed
during printing.
Multiple sheets of
paper do not
feed.
Printing problems
• Remove any obstructions from inside the machine.
• Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove
excess paper from the tray.
• The paper is too thick. Use only paper that meets
the specifications required by the machine. See
page 5.8.
• If an original does not feed into the machine, the
ADF rubber pad may require replacement. See
page 13.7.
• There is too much paper in the tray. Remove
excess paper from the tray. If you are printing on
special materials, use the multi-purpose tray.
• An incorrect type of paper is being used. Use only
paper that meets the specifications required by the
machine. See page 5.8.
• There may be debris inside the machine. Open the
front cover and remove the debris.
• If an original does not feed into the machine, the
ADF rubber pad may require replacement. See
page 13.7.
Use only transparencies specifically designed for
laser printers. Remove each transparency as it exits
from the machine.
Envelopes skew
or fail to feed
correctly.
Ensure that the paper guides are against both sides
of the envelopes.
Suggested solutions
The machine is not
receiving power.
Check the power cord
connections. Check the power
switch and the power source.
The machine is not
selected as the
default printer.
Select Xerox Phaser 3300MFP
PCL 6 as your default printer in
your Windows.
Check the machine for the following:
• The front cover is not closed. Close the cover.
• Paper is jammed. Clear the paper jam. See page 14.2.
• No paper is loaded. Load paper. See page 5.5.
• The print cartridge is not installed. Install the print
cartridge.
If a system error occurs, contact your service
representative.
• Different types of paper may be stacked in the tray.
Load paper of only one type, size, and weight.
• If multiple sheets have caused a paper jam, clear
the paper jam. See page 14.2.
Transparencies
stick together in
the paper exit.
Possible cause
14.11
The connection
cable between the
computer and the
machine is not
connected properly.
Disconnect the printer cable and
reconnect it.
The connection
cable between the
computer and the
machine is defective.
If possible, attach the cable to
another computer that is working
properly and print a job. You can
also try using a different printer
cable.
The port setting is
incorrect.
Check the Windows printer
setting to make sure that the
print job is sent to the correct
port. If the computer has more
than one port, make sure that the
machine is attached to the
correct one.
The machine may be
configured
incorrectly.
Check the printer properties to
ensure that all of the print
settings are correct.
The printer driver
may be incorrectly
installed.
Repair the printer software. See
the Software Section.
The machine is
malfunctioning.
Check the display message on
the control panel to see if the
machine is indicating a system
error.
<Troubleshooting>
Condition
Possible cause
Suggested solutions
For many software applications,
the paper source selection is
found under the Paper tab within
the printer properties. Select the
correct paper source. See the
printer driver help screen.
The
machine
selects
print
materials
from the
wrong
paper
source.
The paper source
selection in the
printer properties
may be incorrect.
A print job
is
extremely
slow.
The job may be very
complex.
Half the
page is
blank.
The page orientation
setting may be
incorrect.
Change the page orientation in
your application. See the printer
driver help screen.
The paper size and
the paper size
settings do not
match.
Ensure that the paper size in the
printer driver setting matches the
paper in the tray.
Or, ensure that the paper size in
the printer driver setting matches
the paper selection in the
software application settings you
use.
The
machine
prints, but
the text is
wrong,
garbled, or
incomplete.
Reduce the complexity of the
page or try adjusting the print
quality settings.
The printer cable is
loose or defective.
Disconnect the printer cable and
reconnect. Try a print job that
you have already printed
successfully. If possible, attach
the cable and the machine to
another computer and try a print
job that you know works. Finally,
try a new printer cable.
The wrong printer
driver was selected.
Check the application’s printer
selection menu to ensure that
your machine is selected.
The software
application is
malfunctioning.
Try printing a job from another
application.
The operating
system is
malfunctioning.
Exit Windows and reboot the
computer. Turn the machine off
and then back on again.
Condition
Pages
print, but
are blank.
The
illustrations
print
incorrectly
in Adobe
Illustrator.
Possible cause
Suggested solutions
The print cartridge is
defective or out of
toner.
Redistribute the toner, if
necessary. See page 13.4.
If necessary, replace the print
cartridge.
The file may have
blank pages.
Check the file to ensure that it
does not contain blank pages.
Some parts, such as
the controller or the
board, may be
defective.
Contact a service representative.
The setting in the
software application
is wrong.
Select Download as Bit Image
in the TrueType Options window
of the graphic properties and
print the document again.
The printer does not print PDF file
correctly. Some parts of graphics,
text, or illustrations are missing.
Incompatibility between the PDF
file and the Acrobat products:
Printing the PDF file as an image
may solve this problem. Turn on
Print As Image from the Acrobat
printing options.
NOTE:It will take longer to print
when you print a PDF file as an
image.
14.12
<Troubleshooting>
If the inside of the machine is dirty or paper has been loaded improperly, you
may notice a reduction in print quality. See the table below to clear the
problem.
Condition
Light or faded print
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Dropouts
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Vertical lines
If a vertical white streak or faded area appears
on the page:
• The paper may not meet specifications; for
example, the paper is too moist or too rough.
See page 5.8.
• The transfer roller may be dirty. Clean the
inside of your machine. See page 13.2.
• The paper path may need cleaning. See page
13.2.
Suggested solutions
If black vertical streaks appear on the page:
• The drum inside the print cartridge has
probably been scratched. Remove the print
cartridge and install a new one. See
page 13.4.
Suggested solutions
• The toner supply is low. You may be able to
temporarily extend the print cartridge life. See
page 13.4. If this does not improve the print
quality, install a new print cartridge.
• The paper may not meet paper specifications;
for example, the paper is too moist or too
rough. See page 5.8.
• If the entire page is light, the print resolution
setting is too low or the toner save mode is on.
Adjust the print resolution and turn the toner
save mode off. See the help screen of the
printer driver and page 2.4, respectively.
• A combination of faded or smeared defects
may indicate that the print cartridge needs
cleaning. See page 13.5.
• The surface of the LSU part inside the
machine may be dirty. Clean the LSU. See
page 13.2.
Toner specks
Condition
If white vertical streaks appear on the page:
• The surface of the LSU part inside the
machine may be dirty. Clean the LSU. See
page 13.2.
Gray background
If the amount of background shading becomes
unacceptable:
• Change to a lighter weight paper. See
page 5.8.
• Check the machine’s environment: very dry
(low humidity) or high humidity (higher than
80% RH) conditions can increase the amount
of background shading.
• Remove the old print cartridge and install a
new one. See page 13.4.
Toner smear
• Clean the inside of the machine. See
page 13.2.
• Check the paper type and quality. See
page 5.8.
• Remove the print cartridge and install a new
one. See page 13.4.
Vertical repetitive
defects
If marks repeatedly appear on the printed side of
the page at even intervals:
A aBb C c
A aBb C c
A aBb C c
A aBb C c
A aBb C c
If faded areas, generally rounded, occur
randomly on the page:
• A single sheet of paper may be defective. Try
reprinting the job.
• The moisture content of the paper is uneven
or the paper has moist spots on its surface.
Try a different brand of paper. See page 5.8.
• The paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
• If these steps do not correct the problem,
contact a service representative.
14.13
<Troubleshooting>
• The print cartridge may be damaged. If a
repetitive mark occurs on the page, print a
cleaning sheet several times to clean the
cartridge; see page 13.5. After the printout, if
you still have the same problems, remove the
print cartridge and install a new one. See page
13.4.
• Parts of the machine may have toner on them.
If the defects occur on the back of the page,
the problem will likely correct itself after a few
more pages.
• The fusing assembly may be damaged.
Contact a service representative.
Condition
Suggested solutions
Condition
Background scatter
Background scatter results from bits of toner
randomly distributed on the printed page.
• The paper may be too damp. Try printing with
a different batch of paper. Do not open
packages of paper until necessary so that the
paper does not absorb too much moisture.
• If background scatter occurs on an envelope,
change the printing layout to avoid printing
over areas that have overlapping seams on
the reverse side. Printing on seams can cause
problems.
• If background scatter covers the entire surface
area of a printed page, adjust the print
resolution through your software application or
the printer properties.
Wrinkles or creases
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See
page 5.8.
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• Try printing to the rear cover.
Back of printouts
are dirty
Check for leaking toner. Clean the inside of the
machine. See page 13.2.
Black pages
• The print cartridge may not be installed
properly. Remove the cartridge and reinsert it.
• The print cartridge may be defective and need
replacing. Remove the print cartridge and
install a new one. See page 13.4.
• The machine may require service. Contact a
service representative.
A
Misformed
characters
Page skew
AaBbC
AaBbCcc
AaBbC
AaBbCcc
AaBbCc
Curl or wave
• If characters are improperly formed and
producing hollow images, the paper stock may
be too slick. Try a different paper. See page
5.8.
• If characters are improperly formed and
producing a wavy effect, the scanner unit may
need service. For service, contact a service
representative.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See
page 5.8.
• Ensure that the paper or other material is
loaded correctly and the guides are not too
tight or too loose against the paper stack.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high
temperature and humidity can cause paper
curl. See page 5.8.
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• Try printing to the rear cover.
A
Suggested solutions
Loose toner
• Clean the inside of the machine. See
page 13.2.
• Check the paper type and quality. See
page 5.8.
• Remove the print cartridge and install a new
one. See page 13.4.
• If the problem persists, the machine may
require service. Contact a service
representative.
Character Voids
Character voids are white areas within parts of
characters that should be solid black:
A
14.14
<Troubleshooting>
• If you are using transparencies, try another
type of transparency. Because of the
composition of transparencies, some
character voids are normal.
• You may be printing on the wrong surface of
the paper. Remove the paper and turn it
around.
• The paper may not meet paper specifications.
See page 5.8.
Condition
Horizontal stripes
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Curl
An unknown image
repetitively appears
on a next few
sheets or loose
toner, light print, or
contamination
occurs.
Suggested solutions
If horizontally aligned black streaks or smears
appear:
• The print cartridge may be installed
improperly. Remove the cartridge and reinsert
it.
• The print cartridge may be defective. Remove
the print cartridge and install a new one. See
page 13.4.
• If the problem persists, the machine may
require service. Contact a service
representative.
If the printed paper is curled or paper does not
feed into the machine:
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• Try printing to the rear cover.
Your printer is probably being used at an altitude
of 2,500 m (8,200 ft) or above.
The high altitude may affect the print quality
such as loose toner or light imaging. You can set
this option through Printer Settings Utility or
Printer tab in printer driver's properties. Refer to
the Software Section for details.
Copying problems
Condition
Suggested solutions
Copies are too light
or too dark.
Use Lighten/Darken to darken or lighten the
background of the copies.
Smears, lines,
marks, or spots
appears on copies.
• If defects are on the original, press Lighten/
Darken to lighten the background of your
copies.
• If no defects are on the original, clean the scan
unit. See page 13.3.
Copy image is
skewed.
• Ensure that the original is face down on the
scanner glass or face up in the ADF.
• Check that the copy paper is loaded correctly.
Blank copies print
out.
Ensure that the original is face down on the
scanner glass or face up in the ADF.
Image rubs off the
copy easily.
• Replace the paper in the tray with paper from a
new package.
• In high humidity areas, do not leave paper in
the machine for extended periods of time.
Frequent copy
paper jams occur.
• Fan the stack of paper, then turn it over in the
tray. Replace the paper in the tray with a fresh
supply. Check/adjust the paper guides, if
necessary.
• Ensure that the paper is the proper paper
weight. 75 g/m2 bond paper is recommended.
• Check for paper or pieces of paper remaining in
the machine after a paper jam has been
cleared.
Print cartridge
produces fewer
copies than
expected before
running out of
toner.
• Your originals may contain pictures, solids, or
heavy lines. For example, your originals may
be forms, newsletters, books, or other
documents that use more toner.
• The machine may be turned on and off
frequently.
• The scanner lid may be left open while copies
are being made.
14.15
<Troubleshooting>
Scanning problems
Network Scan problems
Condition
Suggested solutions
Condition
The scanner does
not work.
• Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the ADF.
• There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works. Try
lowering the scan resolution rate.
• Check that the USB is connected properly.
• Make sure that the USB cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
• Check scan setting to make certain that the
scanner job is being sent to the correct port.
I cannot find a
scanned image
file.
You can check the scanned file’s destination in
the Advanced page in the Network Scan
program’s Properties screen.
I cannot find the
scanned image
file after
scanning.
• Check if the scanned file’s application is on your
computer.
• Check Send image immediately to the
specified folder using an associated default
application in the Advanced page in the
Network Scan program’s Properties screen to
open the scanned image immediately after
scanning.
I forgot my ID
and PIN.
Check your ID and PIN in the Server page in the
Network Scan program’s Properties screen.
I cannot view
the Help file.
To view the Help file, you need to have Internet
Explorer 4 service pack 2 or above.
I cannot use the
Xerox Network
Scan Manager
Check your operating system. Supporting
operating systems are Windows 2000/XP/2003/
Vista.
The unit scans
very slowly.
Message appears
on your computer
screen:
• “Device can't be
set to the H/W
mode you want.”
• “Port is being
used by another
program.”
• “Port is
Disabled.”
• “Scanner is busy
receiving or
printing data.
When the
current job is
completed, try
again.”
• “Invalid handle.”
• “Scanning has
failed.”
• Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user guide.
• There may be a copying or printing job in
progress. When that job is complete, try your
job again.
• The Selected port is currently being used.
Restart your computer and try again.
• The scanner driver is not installed or the
operating environment is not set up properly.
• Ensure that the machine is properly
connected and the power is on, Then restart
your computer.
• The USB cable may be improperly connected
or the power may be off.
Suggested solutions
Fax problems
Condition
Suggested solutions
The machine is not
working, there is no
display and the
buttons are not
working.
• Unplug the power cord and plug it in again.
• Ensure that there is power to the electrical
outlet.
No dial tone
sounds.
• Check that the phone line is connected
properly.
• Check that the phone socket in the wall is
working by plugging in another phone.
The numbers
stored in memory
do not dial
correctly.
Make sure that the numbers are stored in
memory correctly. Print a Phone Book list,
referring to page 10.4.
The original does
not feed into the
machine.
• Make sure that the paper is not wrinkled and
you are putting it in correctly. Check that the
original is the right size, not too thick or thin
• Make sure that the ADF is firmly closed.
• The ADF rubber pad may need to be
replaced. See page 13.7.
14.16
<Troubleshooting>
Condition
Suggested solutions
Faxes are not
received
automatically.
• The receiving mode should be set to Fax.
• Make sure that there is paper in the tray.
• Check to see if the display shows any error
message. If it does, clear the problem.
The machine does
not send.
• Make sure that the original is loaded in the
ADF or on the scanner glass.
• Sending should show up on the display.
• Check the fax machine you are sending to,
to see if it can receive your fax.
The incoming fax
has blank spaces
or is of poorquality.
• The fax machine sending you the fax may be
faulty.
• A noisy phone line can cause line errors.
• Check your machine by making a copy.
• The print cartridge may be empty. Replace
the print cartridge, referring to page 13.4.
Some of the words
on an incoming fax
are stretched.
The fax machine sending you the fax had a
temporary document jam.
There are lines on
the originals you
send.
Check your scan unit for marks and clean it.
See page 13.3.
The machine dials
a number, but a
connection with the
other fax machine
fails.
The other fax machine may be turned off, out
of paper, or cannot answer incoming calls.
Speak with the other machine operator and ask
her/him to sort out the problem.
Faxes do not store
in memory.
There may not be enough memory space to
store the fax. If the display shows the Memory
Full message, delete from memory any faxes
you no longer need and then try again to store
the fax.
Blank areas
appear at the
bottom of each
page or on other
pages, with a small
strip of text at the
top.
You may have chosen the wrong paper
settings in the user option setting. For details
about paper settings, see page 5.8.
Common Windows problems
Condition
Suggested solutions
“File in Use”
message appears
during installation.
Exit all software applications. Remove all
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
“Error Writing to
LPTx” message
appears.
• Ensure that the cables are connected
correctly, the machine is on.
• If bi-directional communication is not turned
on in the driver, it will also cause this
message.
“General
Protection Fault”,
“Exception OE”,
“Spool32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows
and try printing again.
“Fail To Print”, “A
printer timeout
error occurred.”
messages appear.
These messages may appear during printing.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
Note
Refer to Microsoft Windows 2000/XP/Vista User Guide that came
with your PC for further information on Windows error messages.
14.17
<Troubleshooting>
Common PostScript problems
Common Linux problems
The following situations are PS language specific and may occur when
several printer languages are being used.
Note
To receive a printed or screen-displayed message when
PostScript errors occur, open the Print Options window and click
the desired selection next to the PostScript errors section.
Problem
Possible Cause
Solution
PostScript file
cannot be
printed.
The PostScript
driver may not be
installed correctly.
• Install the PostScript
driver, referring to the
Software Section.
• Print a configuration page
and verify that the PS
version is available for
printing.
• If the problem persists,
contact a service
representative.
“Limit Check
Error” message
appears.
The print job was
too complex.
You might need to reduce
the complexity of the page or
install more memory.
A PostScript
error page
prints.
The print job may
not be PostScript.
Make sure that the print job
is a PostScript job. Check to
see whether the software
application expected a setup
or PostScript header file to
be sent to the machine.
The optional
tray 2 is not
selected in the
driver.
The printer driver
has not been
configured to
recognize the
optional tray 2.
Open the PostScript driver
properties, select the Device
Settings tab, and set the
Tray2 option of the
Installable Options section
to Installed.
Problem
Possible Cause and Solution
The machine does not
print
• Check if the printer driver is installed in
your system. Open Unified Driver
configurator and switch to the Printers
tab in Printers configuration window to
look at the list of available printers. Make
sure that your machine is displayed on
the list. If not, please, invoke Add new
printer wizard to set up your device.
• Check if the printer is started. Open
Printers configuration and select your
machine on the printers list. Look at the
description in the Selected printer pane.
If its status contains “(stopped)” string,
please, press the Start button. After that
normal operation of the printer should be
restored. The “stopped” status might be
activated when some problems in
printing occurred. For instance, this
could be an attempt to print document
when port is claimed by a scanning
application.
• Check if the port is not busy. Since
functional components of MFP (printer
and scanner) share the same I/O
interface (port), the situation of
simultaneous access of different
“consumer” application to the same port
is possible. To avoid possible conflicts,
only one of them at a time is allowed to
gain control over the device. The other
“consumer” will encounter “device busy”
response. You should open ports
configuration and select the port
assigned to your printer. In the Selected
port pane you can see if the port is
occupied by some other application. If
this is the case, you should wait for
completion of the current job or should
press Release port button, if you are
sure that the present owner is not
functioning properly.
• Check if your application has special
print option such as “-oraw”. If “-oraw” is
specified in the command line parameter
then remove it to print properly. For
Gimp front-end, select “print” -> “Setup
printer” and edit command line
parameter in the command item.
14.18
<Troubleshooting>
Problem
Possible Cause and Solution
Problem
Possible Cause and Solution
The machine does not
appear on the
scanners list
• Check if your machine is attached to
your computer. Make sure that it is
connected properly via the USB port and
is turned on.
• Check if the scanner driver for your
machine is installed in your system.
Open Unified Driver configurator, switch
to Scanners configuration, then press
Drivers. Make sure that driver with a
name corresponding to your machine's
name is listed in the window. Check if
the port is not busy. Since functional
components of MFP (printer and
scanner) share the same I/O interface
(port), the situation of simultaneous
access of different “consumer”
application to the same port is possible.
To avoid possible conflicts, only one of
them at a time is allowed to gain control
over the device. The other “consumer”
will encounter “device busy” response.
This can usually happen while starting
scan procedure, and appropriate
message box appears.
• To identify the source of the problem,
you should open ports configuration and
select the port assigned to your scanner.
port's symbol /dev/mfp0 corresponds to
LP:0 designation displayed in the
scanners’ options, /dev/mfp1 relates to
LP:1 and so on. USB ports start at /dev/
mfp4, so scanner on USB:0 relates to /
dev/mfp4 respectively and so forth
sequentially. In the Selected port pane
you can see if the port is occupied by
some other application. If this is the
case, you should wait for completion of
the current job or should press Release
port button, if you are sure that the
present port's owner is not functioning
properly.
The machine does not
scan
• Check if a document is loaded into the
machine.
• Check if your machine is connected to
the computer. Make sure if it is
connected properly if I/O error is
reported while scanning.
• Check if the port is not busy. Since
functional components of MFP (printer
and scanner) share the same I/O
interface (port), the situation of
simultaneous access of different
“consumer” application to the same port
is possible. To avoid possible conflicts,
only one of them at a time is allowed to
gain control over the device. The other
“consumer” will encounter “device busy”
response. This can usually happen while
starting scan procedure, and appropriate
message box will be displayed.
To identify the source of the problem,
you should open ports configuration and
select the port assigned to your scanner.
port’s symbol /dev/mfp0 corresponds to
LP:0 designation displayed in the
scanners’ options, /dev/mfp1 relates to
LP:1 and so on. USB ports start at /dev/
mfp4, so scanner on USB:0 relates to /
dev/mfp4 respectively and so forth
sequentially. In the Selected port pane
you can see if the port is occupied by
some other application. If this is the
case, you should wait for completion of
the current job or should press Release
port button, if you are sure that the
present port’s owner is not functioning
properly.
I cannot scan via Gimp
Front-end.
• Check if Gimp Front-end has
“Xsane: Device dialog.” on the “Acquire”
menu. If not, you should install Xsane
plug-in for Gimp on the your computer.
You can find Xsane plug-in package for
Gimp on Linux distribution CD or Gimp
home page. For the detail information,
refer to the Help for Linux distribution CD
or Gimp Front-end application.
If you wish to use other kind of scan
application, refer to the Help for
application.
14.19
<Troubleshooting>
Problem
I encounter error
“Cannot open port
device file” when
printing a document.
Possible Cause and Solution
Please avoid changing print job
parameters (via LPR GUI, for example)
while a print job is in progress. Known
versions of CUPS server break the print
job whenever print options are changed
and then try to restart the job from the
beginning. Since Unified Linux Driver locks
port while printing, the abrupt termination
of the driver keeps the port locked and
therefore unavailable for subsequent print
jobs. If this situation occurred, please, try
to release the port.
Common Macintosh problems
Problem
Suggested solutions
The document has
printed, but the print job
has not disappeared from
the spooler in
Mac OS 10.3.2.
Update your Mac OS to OS 10.3.3. or
higher.
When print a document
in Macintosh with
Acrobat Reader 6.0 or
higher, colors prints
incorrectly.
The resolution setting in the printer
driver may not be matched with that in
Acrobat Reader.
Make sure that the resolution setting in
your printer driver matches that in
Acrobat Reader.
14.20
<Troubleshooting>
15 Installing accessories
2
Grasp the control board cover and slide toward you to open it.
Your machine is a full-featured one that has been optimized to meet most
of your printing needs. Recognizing that each user may have different
requirements, however, Xerox makes several accessories available to
enhance your machine’s capabilities.
This chapter includes:
•
Precautions when installing accessories
•
Installing a memory DIMM
1
Precautions when installing accessories
1
Disconnect the power cord
Never remove the control board cover while the power is being supplied.
3
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
control board cover
Completely open the latch on each side of the DIMM slot. Remove
the preinstalled memory DIMM.
Discharge static electricity
The control board and internal accessories (network interface card or
memory DIMM) are sensitive to static electricity. Before installing or
removing an internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk round before
finishing installation, discharge any static electricity once again.
1
2
Installing a memory DIMM
1
2
Your machine has a dual in-line memory module (DIMM) slot. Use this
DIMM slot to install additional memory.
The Phaser 3300MFP has 96 MB of memory. It can be expanded to
320 MB. However, users must remove the preinstalled memory DIMM
before upgrading the memory.
latch
memory DIMM
4
Take out a new memory DIMM from the plastic bag.
5
Holding the memory DIMM by the edges, align the notches on the
memory DIMM with the grooves on the memory DIMM slot.
For order information for optional memory DIMMs, see page 12.1.
1
Turn the machine off and unplug all cables from the machine.
Note
The notches and grooves illustrated above may not match
those on an actual DIMM and the slot.
15.1
<Installing accessories>
6
Activating the added memory in the PS printer
properties
Push the DIMM straight into the DIMM slot until it snaps into place.
Make sure the latches fit over the notches located on either side of
the DIMM.
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver so that you can use it.
7
1
Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see the
Software Section.
2
Click the Windows Start menu.
3
For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
Replace the control board cover.
For Windows Vista, select Control Panel > Hardware and Sound
> Printers.
8
4
Select the PS printer.
5
Click the right mouse button on the machine icon and select
Properties.
6
For Windows 2000/XP/2003/Vista, select Device Settings.
7
Select the amount of memory you installed from Printer Memory in
the Installable Options section.
8
Click OK.
Reconnect the power cord and printer cable, and turn the machine
on.
15.2
<Installing accessories>
16 Specifications
Item
This chapter includes:
•
General specifications
•
Scanner and copier specifications
•
Printer specifications
•
Facsimile specifications
General specifications
Item
Up to 50 sheets (75 g/m2)
ADF document size
Width: 142 to 216 mm
External dimension
(W x D x H)
466 x 435.4 x 458 mm
Weight (including
consumables)
18.9 Kg (41.6 lb)
Package weight
Paper: 2.8 Kg (6.17 lb)
Plastic: 0.7 Kg (1.54 lb)
Duty cycle
Monthly print: Up to 25,000 pages
Printer specifications
Length: 148 to 356 mm
Paper input capacity
(18.3 x 17.1 x 18 in)
a. Sound Pressure Level, ISO 7779
b. Declared yield value in accordance with ISO/IEC 19752. The number of pages
may be affected by operating environment, printing interval, media type, and
media size.
Description
ADF
Description
Tray 1/2: 250 multi-pages for plain paper
(75 g/m2)
Multi-purpose tray: 50 pages for plain paper,
5 pages for card stock, labels,
transparencies, and envelopes
(60 to 163 g/m2)
Item
Description
Printing method
a
Laser Beam Printing
Printing speed
Up to 28 ppm in A4 (30 ppm in Letter)
Duplex printing
speed
Up to 19 ipm in A4 (21 ipm in Letter)
First print out time
8,5 seconds (from ready)
Paper output
capacity
Output tray: 150 sheets (face down)
Rear cover: 1 sheet (face up)
Consumables
1-piece print cartridge system
Print resolution
Up to 1,200 x 1,200 dpi effective output
Power rating
AC 110 - 127 V or AC 220 - 240 V
Printer language
PCL 6, PS 3
See the Rating label on the machine for the
correct voltage, frequency (hertz) and type of
current for your machine.
OS Compatibilityb
Windows 2000/XP/2003/Vista
Power consumption
Noise levela
Various Linux OS (USB only)
Macintosh 10.3 ~ 10.5
Average: Less than 520 W
Power save mode: Less than 20 W
Interface
Ethernet 10/100 Base TX (Embedded type)
Standby mode: Less than 39 dBA
Printing: Less than 54 dBA
a. Print speed will be affected by operating system used, computing performance,
application software, connecting method, media type, media size, and job
complexity.
b. Please visit www.xerox.com/office/support to download the latest software
version.
Copying mode: Less than 55 dBA
Warm up: Less than 49 dBA
Warm-up time
Less than 20 seconds (from sleep mode)
Operating
environment
Temperature: 10 °C to 32 °C
Display
16 characters x 2 lines
Print cartridge lifeb
4,000 or 8,000 pages
Memory
96 MB (max. 320 MB)
High Speed USB 2.0
Humidity: 20% to 80% RH
16.1
<Specifications>
Scanner and copier specifications
Item
Facsimile specifications
Description
Item
Description
Compatibility
TWAIN standard / WIA standard
Compatibility
ITU-T Group 3
Scanning method
ADF and Flat-bed Color CCD (Charge
Coupled Device) module
Applicable line
Public Switched Telephone Network (PSTN)
or behind PABX
Resolution
Optical: 600 x 1,200 dpi (mono and color)
Enhanced: 4,800 x 4,800 dpi
Data coding
MH/MR/MMR/JPEG/ECM (Error Correction
Mode)
Effective scanning
length
Scanner glass: 297 mm
Modem speed
33,6 Kbps
ADF: 356 mm
Approx. 3 seconds/pagea
Effective scanning
width
Max 208 mm
Transmission
speed
Color bit depth
24 bit
Maximum
document length
Scanner glass: 297 mm
Automatic document glass: 356 mm
Mono bit depth
1 bit for Black & White mode
Resolution
Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi
8 bit for Gray mode
Copy speeda
Up to 28 ppm in A4 (30 ppm in Letter)
Copy resolution
Scan: up to 600 x 300 (text, text/photo)
up to 600 x 600 (photo using platen)
up to 600 x 300 (photo using ADF)
Print: up to 600 x 600 (text, text/photo, photo)
Zoom rate
Photo: 203 x 196 dpi
Color: 200 x 200 dpi
Scanner glass: 25 to 400%
ADF: 25 to 100%
Multiple copies
1 to 99 pages
Grayscale
256 levels
Memory
6 MB
Halftone
256 levels
Auto dialer
Speed dialing (up to 240 numbers)
a. Standard resolution, MMR(JBIG), Maximum modem speed, Phase ”C” by ITU-T
No. 1 chart, Memory Tx, ECM.
a. Copy Speed is based on Single Document Multiple Copy.
16.2
<Specifications>
INDEX
Numerics
D
I
2/4-up, special copy 6.2
date and time, set 2.2
default mode, change 2.2
delayed fax 9.6
DIMM, install 15.1
display language, change 2.2
DRPD (Distinctive Ring Pattern Detection)
9.4
drum, clean 13.5
ID card, special copy 6.3
installing accessories
memory 15.1
A
accessories
installing
memory DIMM 15.1
order information 12.1
Address Book, use 8.5
ADF 1.2
ADF rubber pad, replace 13.7
ADF, load 5.1
alarm sound 2.3
Ans/Fax mode, receiving mode 9.4
B
background image, erase 6.4
C
characters, enter 2.3
cleaning
drum 13.5
inside 13.2
LSU 13.3
outside 13.2
scan unit 13.3
clock mode 2.2
clone, special copy 6.4
collation, special copy 6.2
component location 1.2
control panel 1.3
copying
2/4-up 6.2
collation 6.2
default setting, change 6.2
erasing background 6.4
ID card copy 6.3
poster 6.3
time out, set 6.4
E
Erasing background, special copy 6.4
error messages 14.7
J
jam, clear
document 14.1
paper 14.2
job timeout, set 2.4
K
key sound 2.3
F
fax header, set 9.1
Fax mode, receiving mode 9.4
fax number, set 9.1
faxing
default settings, change 10.2
delayed faxes 9.6
fax setup 10.1
forwarding faxes 9.7
Multiple Send faxes 9.6
original settings 9.1
priority faxes 9.7
receiving faxes 9.3
sending faxes 9.2
forwarding faxes 9.7
G
Group dial numbers, set 10.3
H
high altitude 14.15
1
L
Linux
requirements 3.3
Linux problems 14.18
loading originals
ADF 5.1
scanner glass 5.1
loading paper
multi-purpose tray 5.7
tray 1/optional tray2 5.5
M
machine ID, set 9.1
Macintosh
requirements 3.2
Macintosh problems 14.20
memory DIMM, install 15.1
memory, clear 13.2
Multiple Sned faxes 9.6
multi-purpose tray 5.7
N
network scan
scanning 8.3
timeout, set 8.4
Network Scan program
adding scanners 8.2
problems 14.16
network setup
802.1x 4.2
EtherTalk 4.2
operating systems 4.1
TCP/IP 4.2
n-up (multiple pages per sheet)
copying 6.2
O
originals
jam, clear 14.1
loading 5.1
output location, select 5.8
output tray 5.8
P
paper guidelines 5.4
paper jam, clear
duplex area 14.5
fuser area or around toner cartridge
14.3
multi-purpose tray 14.3
optional tray 2 14.3
paper exit area 14.4
tray 1 14.2
paper level indicator 5.5
paper load
multi-purpose tray 5.7
tray 1/optional tray 2 5.5
paper size
setting 5.8
specifications 5.3
paper tray, set
copy 6.1
fax 9.3
paper type
setting 5.8
specifications 5.3
Phone Book
group dial numbers 10.3
speed buttons 10.2
speed dial numbers 10.3
poster, special copy 6.3
PostScript problems 14.18
power save mode 2.4
printing
reports 13.1
USB memory 11.2
priority fax 9.7
problem, solve
copying 14.15
error messages 14.7
faxing 14.16
Linux 14.18
Macintosh 14.20
Network Scan 14.16
paper feeding 14.11
PostScript errors 14.18
printing 14.11
scanning 14.16
Windows 14.17
R
rear cover, use 5.9
receiving a fax
in Ans/Fax mode 9.4
in DRPD mode 9.4
in Fax mode 9.4
in Secure Receiving mode 9.5
in Tel mode 9.4
in the memory 9.6
receiving modes 9.3
redialing
automatically 9.3
manually 9.3
replacement parts 13.6
replacing
ADF rubber pad 13.7
toner cartridge 13.4
replacing, toner cartridge 13.6
reports, print 13.1
ringer 2.3
S
scan power save mode 2.4
scanner glass
cleaning 13.3
loading documents 5.1
scanning
default setting, change 8.5
scan settings 8.5
to application 8.1
to email 8.4
to FTP server 8.4
to network computer 8.3
to SMB server 8.5
USB flash memory 11.1
secure receiving mode 9.5
sending a fax
2
automatically 9.2
manually 9.2
sounds, set 2.3
speaker sound 2.3
speaker volume 2.3
special copy features 6.2
special print media, guidelines 5.4
specifications
facsimile 16.2
general 16.1
paper 5.3
printer 16.1
scanner and copier 16.2
speed buttons, set 10.2
speed dial numbers, set 10.3
supplies
checking life 13.6
order information 12.1
T
Tel mode, receiving mode 9.4
toner cartridge
checking remaining toner 13.6
cleaning 13.5
maintaining 13.3
redistributing 13.4
replacing 13.4, 13.6
toner save mode, use 2.4
U
USB flash memory
data backup 11.3
managing 11.3
printing 11.2
scanning 11.1
V
volume, adjust
ringer 2.3
speaker 2.3
W
Windows problems 14.17
Phaser® 3300MFP
Multifunction Printer
Phaser 3300MFP
Software Section
®
SOFTWARE SECTION
CONTENTS
Chapter 1:
INSTALLING PRINTER SOFTWARE
IN
WINDOWS
Installing Printer Software ........................................................................................................ 4
Installing Software for Local Printing ................................................................................. 4
Installing Software for Network Printing ............................................................................. 6
Reinstalling Printer Software ..................................................................................................... 9
Removing Printer Software ..................................................................................................... 10
Chapter 2:
USING SETIP
Installing SetIP ..................................................................................................................... 11
Using SetIP .......................................................................................................................... 12
Chapter 3:
BASIC PRINTING
Printing a Document .............................................................................................................. 13
Printing to a file (PRN) .......................................................................................................... 14
Printer Settings ..................................................................................................................... 14
Layout Tab .................................................................................................................. 15
Paper Tab .................................................................................................................... 15
Graphics Tab ............................................................................................................... 16
Extras Tab ................................................................................................................... 17
Using a Favorite Setting ................................................................................................ 18
Using Help ................................................................................................................... 18
Chapter 4:
ADVANCED PRINTING
Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 19
Printing Posters ..................................................................................................................... 20
Printing Booklets .................................................................................................................. 20
Printing on Both Sides of Paper ............................................................................................... 21
Printing a Reduced or Enlarged Document ................................................................................ 21
Fitting Your Document to a Selected Paper Size ......................................................................... 21
Using Watermarks ................................................................................................................. 22
1
Using an Existing Watermark ......................................................................................... 22
Creating a Watermark ................................................................................................... 22
Editing a Watermark ..................................................................................................... 22
Deleting a Watermark ................................................................................................... 22
Using Overlays ...................................................................................................................... 23
What is an Overlay? ...................................................................................................... 23
Creating a New Page Overlay ......................................................................................... 23
Using a Page Overlay .................................................................................................... 23
Deleting a Page Overlay ................................................................................................ 23
Chapter 5:
USING WINDOWS POSTSCRIPT DRIVER
Printer Settings ..................................................................................................................... 24
Advanced .................................................................................................................. 24
Using Help ................................................................................................................... 24
Chapter 6:
SHARING
THE
PRINTER LOCALLY
Setting Up a Host Computer ................................................................................................... 25
Setting Up a Client Computer .................................................................................................. 25
Chapter 7:
USING UTILITY APPLICATIONS
Using Printer Settings Utility ................................................................................................... 26
Using Onscreen Help ..................................................................................................... 26
Opening the Troubleshooting Guide ......................................................................................... 26
Changing the Status Monitor Program Settings .......................................................................... 26
Chapter 8:
SCANNING
Scanning Process with TWAIN-enabled Software ........................................................................ 27
Scanning Using the WIA Driver ................................................................................................ 27
Windows XP ................................................................................................................. 27
Windows Vista ............................................................................................................. 27
Chapter 9:
USING YOUR PRINTER
IN
LINUX
Getting Started ..................................................................................................................... 29
Installing the Unified Linux Driver ............................................................................................ 29
Installing the Unified Linux Driver ................................................................................... 29
Uninstalling the Unified Linux Driver ............................................................................... 30
2
Using the Unified Driver Configurator ....................................................................................... 31
Opening the Unified Driver Configurator .......................................................................... 31
Printers Configuration ................................................................................................... 31
Scanners Configuration ................................................................................................. 32
Ports Configuration ....................................................................................................... 32
Configuring Printer Properties ................................................................................................. 33
Printing a Document .............................................................................................................. 33
Printing from Applications .............................................................................................. 33
Printing Files ................................................................................................................ 34
Scanning a Document ............................................................................................................ 34
Using the Image Manager .............................................................................................. 35
Chapter 10:
USING YOUR PRINTER
WITH A
MACINTOSH
Installing Software for Macintosh ............................................................................................. 37
Setting Up the Printer ............................................................................................................ 38
For a Network-connected Macintosh ................................................................................ 38
For a USB-connected Macintosh ..................................................................................... 39
Installable Options ................................................................................................................. 39
Printing ................................................................................................................................ 40
Printing a Document ..................................................................................................... 40
Changing Printer Settings .............................................................................................. 40
Printing Multiple Pages on One Sheet of Paper .................................................................. 41
Duplex Printing ............................................................................................................ 42
Scanning .............................................................................................................................. 42
3
1
Typical Installation
Installing Printer Software in
Windows
This is recommended for most users. All components necessary for
printer operations will be installed.
This chapter includes:
•
Installing Printer Software
•
Reinstalling Printer Software
•
Removing Printer Software
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive and click OK.
NOTE: The following procedure is based on Windows XP, for other
operating systems, refer to the corresponding Windows user's guide
or online help.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
3
Click Install Software.
4
Select Typical installation for a local printer. Click Next.
Installing Printer Software
You can install the printer software for local printing and/or network
printing. To install the printer software on the computer, perform the
appropriate installation procedure depending on the printer in use.
A printer driver is software that lets your computer communicate with
your printer. The procedure to install drivers may differ depending on the
operating system you are using.
All applications should be closed on your PC before beginning
installation.
NOTE: You can install PostScript printer driver, when the machine is
attached to your computer or a network.
Installing Software for Local Printing
A local printer is a printer directly attached to your computer using the
USB printer cable supplied with your printer. If your printer is attached to
a network, skip this step and go to “Installing Software for Network
Printing” on page 6.
You can install the printer software using the typical or custom method.
NOTE: If the “New Hardware Wizard” window appears during the
installation procedure, click
in the upper right corner of the box
to close the window, or click Cancel.
4
Installing Printer Software in Windows
Custom Installation
NOTE: If your printer is not already connected to the computer, the
following window will appear.
You can choose individual components to install.
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next, and
No on the following screen. Then the installation will start and a
test page will not be printed at the end of the installation.
• The installation window that appears in this User Guide may
differ depending on the printer and interface in use.
5
3
Click Install Software.
4
Select Custom installation. Click Next.
After the installation is finished, a window asking you to print a
test page appears. If you choose to print a test page, select the
checkbox and click Next.
Otherwise, just click Next and skip to step 7.
6
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7
Click Finish.
NOTE: After setup is complete, if your printer driver does not work
properly, check the printer and power cables to make sure they are
connected properly, then reinstall the printer driver. See
“Reinstalling Printer Software” on page 9.
5
Installing Printer Software in Windows
5
Select your printer and click Next.
NOTE: You can change the desired installation folder by clicking
[Browse].
7
After the installation is finished, a window asking you to print a
test page appears. If you choose to print a test page, select the
checkbox and click Next.
Otherwise, just click Next and skip to step 9.
8
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
9
Click Finish.
Installing Software for Network Printing
NOTE: If your printer is not already connected to the computer, the
following window will appear.
Before you begin
Before turning on the machine:
• Confirm that an existing operational network utilizing TCP/IP is
available.
• Confirm that the Ethernet cable is plugged into the machine and is
connected to an operational Ethernet port on the network.
When you connect your printer to a network, you must first configure the
TCP/IP settings for the printer. After you have assigned and verified the
TCP/IP settings, you are ready to install the software on each computer
on the network.
You can install the printer software using the typical or custom method.
Typical Installation
This is recommended for most users. All components necessary for
printer operations will be installed.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next, and
No on the following screen. Then the installation will start and a
test page will not be printed at the end of the installation.
• The installation window that appears in this User Guide may
differ depending on the printer and interface in use.
6
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network, see
the supplied printer’s User Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
Select the components to be installed and click Next.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
6
Installing Printer Software in Windows
3
Click Install Software.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your printer
to the network. To add the printer to the network, enter the
port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print a
Network Configuration page.
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
NOTE: To search the network printer, the firewall should be disabled.
For Windows operating system, click Start ->Control Panel and
start windows firewall, and set this option unactivated. For other
operating system, refer to its on-line guide.
4
Select Typical installation for a network printer. Click Next.
6
After the installation is finished, click Finish. If you choose to
print a test page, select the checkbox.
7
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8
Click Finish.
NOTE: After setup is complete, if your printer driver does not work
properly, reinstall the printer driver. See “Reinstalling Printer
Software” on page 9.
Custom Installation
You can choose individual components to install and set a specific IP
address.
5
The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network, see
the supplied printer’s User Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
7
Installing Printer Software in Windows
3
Click Install Software.
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
NOTE: To search the network printer, the firewall should be disabled.
For Windows operating system, click Start ->Control Panel and
start windows firewall, and set this option unactivated. For other
operating system, refer to its on-line guide.
TIP: If you want to set a specific IP address on a specific network
printer, click the Set IP Address button. The Set IP Address window
appears. Do as follows:
4
5
Select Custom installation. Click Next.
a. Select a printer to be set with a specific IP address from the list.
To verify your printer’s IP address or MAC address, print a
Network Configuration page.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c. Click Next.
The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
6
Select the components to be installed and click Next.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your printer
to the network. To add the printer to the network, enter the
port name and the IP address for the printer.
To verify your printer’s IP address or the MAC address, print a
Network Configuration page.
8
Installing Printer Software in Windows
7
4
You can also change the printer name, set the printer to be
shared on the network, set the printer as the default printer, and
change the port name of each printer. Click Next.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your printer
to the network. To add the printer to the network, enter the
port name and the IP address for the printer.
To install this software on a server, select the Setting up this
printer on a server checkbox.
8
After the installation is finished, click Finish. If you choose to
print a test page, select the checkbox.
9
If the test page prints out correctly, click Yes.
• To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
If not, click No to reprint it.
10
The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
You will see a component list so that you can reinstall any item
individually.
Click Finish.
NOTE: If your printer is not already connected to the computer, the
NOTE: After setup is complete, if your printer driver does not work
properly, reinstall the printer driver. See “Reinstalling Printer
Software” on page 9.
following window will appear.
Reinstalling Printer Software
You can reinstall the software if installation fails.
1
2
Start Windows.
3
Select Repair and click Next.
From the Start menu select Programs or All Programs →
your printer driver name → Maintenance.
• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next, and
No on the following screen. Then the installation will start and a
test page will not be printed at the end of the installation.
• The reinstallation window that appears in this User Guide may
differ depending on the printer and interface in use.
9
Installing Printer Software in Windows
5
Select the components you want to reinstall and click Next.
If you installed the printer software for local printing and you
select your printer driver name, the window asking you to
print a test page appears. Do as follows:
a. To print a test page, select the check box and click Next.
b. If the test page prints out correctly, click Yes.
If it doesn’t, click No to reprint it.
6
When the reinstallation is done, click Finish.
Removing Printer Software
1
2
Start Windows.
3
Select Remove and click Next.
From the Start menu select Programs or All Programs →
your printer driver name → Maintenance.
You will see a component list so that you can remove any item
individually.
4
Select the components you want to remove and then click
Next.
5
When your computer asks you to confirm your selection, click
Yes.
The selected driver and all of its components are removed from
your computer.
6
After the software is removed, click Finish.
10
Installing Printer Software in Windows
2
Using SetIP
•
Installing SetIP
•
Using SetIP
4
Click Next.
5
Click Next.
6
Click Finish.
Installing SetIP
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
3
Click Install SetIP Utility(Optional).
11
Using SetIP
Using SetIP
1
From the Windows Start menu, select Programs or All
Programs Æ your printer driver name Æ SetIP Æ SetIP.
The program automatically detects and displays new and
configured print servers on your network.
2
Select the name of your printer and click
. If you cannot find
your printer name, click
to refresh the list.
NOTES:
• To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn’t show your printer, click
enter your
network printer card’s Mac address, IP address, subnet mask,
default gateway, and then click Apply.
3
4
Click OK to confirm the settings.
Click Exit to close the SetIP program.
12
Using SetIP
3
1
2
Basic Printing
This chapter explains the printing options and common printing
tasks in Windows.
Open the document you want to print.
Select Print from the File menu. The Print window is
displayed. It may look slightly different depending on your
application.
The basic print settings are selected within the Print
window. These settings include the number of copies and
print range.
This chapter includes:
• Printing a Document
• Printing to a file (PRN)
• Printer Settings
- Layout Tab
- Paper Tab
Make sure that your
printer is selected.
- Graphics Tab
- Extras Tab
- Using a Favorite Setting
- Using Help
Printing a Document
3
Select your printer driver from the Name drop-down
list.
To take advantage of the printer features provided by your
printer driver, click Properties or Preferences in the
application’s Print window. For details, see “Printer
Settings” on page 14.
NOTES:
• The printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• Check the Operating System(s) that are compatible
with your printer. Please refer to the OS Compatibility
section of Printer Specifications in your Printer User
Guide.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
• When you select an option in printer properties, you may see
If you see Setup, Printer, or Options in your Print
window, click it instead. Then click Properties on the next
screen.
4
an exclamationmark
or
mark. An exclamation mark
means you can select that certain option but it is not
recommended, and
mark means you cannot select that
option due to the machineís setting or environment.
The following procedure describes the general steps required
for printing from various Windows applications. The exact steps
for printing a document may vary depending on the application
program you are using. Refer to the User’s Guide of your
software application for the exact printing procedure.
13
Basic Printing
Click OK to close the printer properties window.
To start the print job, click OK or Print in the Print
window.
Printing to a file (PRN)
Printer Settings
You will sometimes need to save the print data as a file for your
own purposes.
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
To create a file:
1 Check the Print to file box at the Print window.
The printer properties window may differ, depending on your
operating system. This Software User Guide shows the
Properties window for Windows XP.
The printer driver Properties window that appears in this User
Guide may differ depending on the printer in use.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your
Windows User Guide).
NOTES:
2
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User
Guide or online help.
1. Click the Windows Start button.
2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences.
5. Change the settings on each tab, click OK.
Select the folder and assign a name to the file and then
click OK.
14
Basic Printing
Layout Tab
Paper Tab
The Layout tab provides options to adjust how the document
appears on the printed page. The Layout Options includes
Multiple Pages per Side and Poster Printing. See “Printing
a Document” on page 13 for more information on accessing
printer properties.
Use the following options to set the basic paper handling
specifications when you access the printer properties. See
“Printing a Document” on page 13 for more information on
accessing printer properties.
Click the Paper tab to access various paper properties.
1
1
2
2
3
4
5
Paper Orientation
1 Copies
Copies allows you to choose the number of copies to be printed.
You can select 1 to 999 copies.
Paper Orientation allows you to select the direction in which
information is printed on a page.
• Portrait prints across the width of the page, letter style.
• Landscape prints across the length of the page, spreadsheet
style.
• Rotate allows you to rotate the page the selected degrees.
Portrait
2 Size
Size allows you to set the size of paper you loaded in the tray.
If the required size is not listed in the Size box, click Custom.
When the Custom Paper Setting window appears, set the paper
size and click OK. The setting appears in the list so that you can
select it.
3 Source
Make sure that Source is set to the corresponding paper tray.
Use MP Tray when printing on special materials like envelopes
and transparencies. You have to load one sheet at a time into the
Manual Tray or Multi-Purpose Tray.
If the paper source is set to Auto Select, the printer
automatically picks up print material in the following tray order:
Manual Tray or Multi-Purpose Tray, Tray1, Optional Tray2
Landscape
Layout Options
Layout Options allows you to select advanced printing options.
You can choose Multiple Pages per Side and Poster Printing.
• For details, see “Printing Multiple Pages on One Sheet of Paper
(N-Up Printing)” on page 19.
• For details, see “Printing Posters” on page 20
Double-sided Printing
Double-sided Printing allows you to print on both sides of
paper. If this option does not appear, your printer does
not have this feature.
• For details, see “Printing on Both Sides of Paper” on page 21.
15
Basic Printing
Graphics Tab
4 Type
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If not, print quality may not be acheived as you want.
Cotton: 20 lb to 24 lb (75~90 g/m2) cotton paper such as Gilbert
25 % and Gilbert 100 %.
Plain Paper: Normal plain paper. Select this type if your printer is
monochrome and printing on the 16 lb (60 g/m2) cotton paper.
Recycled: 20 lb to 24 lb (75~90 g/m2) recycled paper.
Color Paper: 20 lb to 24 lb (75~90 g/m2) color-backgrounded
paper.
Use the following Graphic options to adjust the print quality for
your specific printing needs. See “Printing a Document” on
page 13 for more information on accessing printer properties.
Click the Graphic tab to display the properties shown below.
NOTE: For optimal performance and reliability consider using xerox
paper.
5 Scaling Printing
Scaling Printing allows you to automatically or manually scale
your print job on a page. You can choose from None, Reduce/
Enlarge, and Fit to Page.
• For details, see “Printing a Reduced or Enlarged Document” on
page 21.
• For details, see “Fitting Your Document to a Selected Paper
Size” on page 21.
Resolution
The Resolution options you can select may vary
depending on your printer model. The higher the setting,
the sharper the clarity of printed characters and graphics. The
higher setting also may increase the time it takes to print a
document.
Image Mode
The available options are Normal and Text Enhance. Some
printers do not support this feature.
• Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control panel of
the printer.
• Normal: This setting is for normal documents.
• Text Enhancement: Image Mode allows the user to enhance
printouts.
Toner Saver Mode
Selecting this option extends the life of your print cartridge and
reduces your cost per page without a significant reduction in print
quality. Some printers do not support this feature.
• Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control panel of
the printer.
• On: Select this option to allow the printer to use less toner on
each page.
• Off: If you don’t need to save toner when printing a document,
select this option.
16
Basic Printing
Advanced Options
Extras Tab
You can set advanced settings by clicking the Advanced
Options button.
• TrueType Options: This option determines what the driver
tells the printer about how to image the text in your document.
Select the appropriate setting according to the status of your
document.
- Download as Outline: When this option is selected, the
driver will download any TrueType fonts that are used in your
document not already stored (resident) on your printer. If,
after printing a document, you find that the fonts did not print
correctly, choose Download as bit image and resubmit your
print job. The Download as bit image setting is often useful
when printing Adobe. This feature is available only
when you use the PCL printer driver.
- Download as Bitmap: When this option is selected, the
driver will download the font data as bitmap images.
Documents with complicated fonts, such as Korean or
Chinese, or various other fonts, will print faster in this setting.
- Print as Graphics: When this option is selected, the driver
will download any fonts as graphics. When printing documents
with high graphic content and relatively few TrueType fonts,
printing performance (speed) may be enhanced in this
setting.
• Print All Text To Black: When the Print All Text To Black
option is checked, all text in your document prints solid black,
regardless of the color it appears on the screen.
You can select output options for your document. See “Printing
a Document” on page 13 for more information about accessing
the printer properties.
Click the Extras tab to access the following feature:
1
2
3
1 Watermark
You can create a background text image to be printed on each
page of your document. For details, see “Using Watermarks” on
page 22.
2 Overlay
Overlays are often used to take the place of preprinted forms and
letterhead paper. For details, see “Using Overlays” on page 23.
3 Output Options
• Print Subset: You can set the sequence in which the pages
print. Select the print order from the drop-down list.
- Normal: Your printer prints all pages from the first page to
the last page.
- Reverse All Pages(3,2,1): Your printer prints all pages from
the last page to the first page.
- Print Odd Pages: Your printer prints only the odd numbered
pages of the document.
- Print Even Pages: Your printer prints only the even
numbered pages of the document.
17
Basic Printing
• Use Printer Fonts: When Use Printer Fonts is checked, the
printer uses the fonts that are stored in its memory (resident
fonts) to print your document, rather than downloading the
fonts used in your document. Because downloading fonts takes
time, selecting this option can speed up your printing time.
When using Printer fonts, the printer will try to match the fonts
used in your document to those stored in its memory. If,
however, you use fonts in your document that are very different
from those resident in the printer, your printed output will
appear very different from what it looks like on the screen.
This feature is available only when you use the PCL
printer driver.
Using a Favorite Setting
The Favorites option, which is visible on each properties tab,
allows you to save the current properties settings for future
use.
To save a Favorites item:
1
2
Change the settings as needed on each tab.
3
Click Save.
Enter a name for the item in the Favorites input box.
When you save Favorites, all current driver settings are
saved.
To use a saved setting, select the item from the Favorites drop
down list. The printer is now set to print according to the
Favorites setting you selected.
To delete a Favorites item, select it from the list and click
Delete.
You can also restore the printer driver’s default settings by
selecting Printer Default from the list.
Using Help
Your printer has a help screen that can be activated by clicking
the Help button in the printer properties window. These help
screens give detailed information about the printer features
provided by the printer driver.
You can also click
from the upper right corner of the window,
and then click on any setting.
18
Basic Printing
4
Advanced Printing
Printing Multiple Pages on One
Sheet of Paper (N-Up Printing)
This chapter explains printing options and advanced printing
tasks.
1
2
3
4
NOTE:
• The printer driver Properties window that appears in this
User Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
You can select the number of pages to print on a single sheet
of paper. To print more than one page per sheet, the pages will
be reduced in size and arranged in the order you specify. You
can print up to 16 pages on one sheet.
1
2
3
This chapter includes:
• Printing Multiple Pages on One Sheet of Paper (N-Up
Printing)
4
• Printing Posters
• Printing Booklets
• Printing on Both Sides of Paper
5
• Printing a Reduced or Enlarged Document
6
• Fitting Your Document to a Selected Paper Size
• Using Watermarks
• Using Overlays
19
Advanced Printing
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
From the Layout tab, choose Multiple Pages per Side in
the Layout Type drop-down list.
Select the number of pages you want to print per sheet
(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down
list.
Select the page order from the Page Order drop-down
list, if necessary.
Check Print Page Border to print a border around each
page on the sheet.
Click the Paper tab, select the paper source, size, and
type.
Click OK and print the document.
Printing Posters
Printing Booklets
This feature allows you to print a single-page document onto 4,
9, or 16 sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
1
2
3
8
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
Click the Layout tab, select Poster Printing in the
Layout Type drop-down list.
Configure the poster option:
9
8
9
This printer feature allows you to print your document on both
sides of the paper and arranges the pages so that the paper can
be folded in half after printing to produce a booklet.
1 To change the print settings from your software
application, access the printer properties. See “Printing a
Document” on page 13.
2 From the Layout tab, choose Booklet Printing from the
Type drop-down list.
You can select the page layout from Poster<2x2>,
Poster<3x3>, or Poster<4x4>. If you select
Poster<2x2>, the output will be automatically stretched
to cover 4 physical pages.
NOTE: The booklet printing option is available when A4,
Letter, Legal, Oficio, or Folio size is selected in the Size option
on the Paper tab.
3
4
5
Specify an overlap in millimeters or inches to make it
easier to pasting the sheets together.
0.15 inches
0.15 inches
4
5
Click the Paper tab, select the paper source, size, and
type.
Click OK and print the document. You can complete the
poster by pasting the sheets together.
20
Advanced Printing
Click the Paper tab, and select the paper source, size, and
type.
Click OK and print the document.
After printing, fold and staple the pages.
Printing on Both Sides of Paper
Printing a Reduced or Enlarged
Document
You can print on both sides of a sheet of paper. Before printing,
decide how you want your document oriented.
You can change the size of a page’s content to appear larger or
smaller on the printed page.
The options are:
• Printer Setting, if you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer. If this option does not appear,
1
your printer does not have this feature.
2
• None
• Long Edge, which is the conventional layout used in
book binding.
• Short Edge, which is the type often used with calendars.
3
4
5
2
2
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
From the Paper tab, select Reduce/Enlarge in the
Printing Type drop-down list.
Enter the scaling rate in the Percentage input box.
You can also click the
or
button.
Select the paper source, size, and type in Paper Options.
Click OK and print the document.
3
3
2
5
5
2
3
5
3
Fitting Your Document to a
Selected Paper Size
5
▲ Long Edge
▲ Short Edge
• Reverse Duplex, allows you to select general print
order compare to duplex print order. If this option does
not appear, your printer does not have this feature.
A
NOTE:
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
• Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to the
printer may result.
• To use double-sided printing, you can use only the following
paper sizes: A4, Letter, Legal, Oficio, and Folio, with a weight
of 20~24 lbs (75~90 g/m²).
1
1
4
5
2
3
4
5
2
3
To change the print settings from your software
application, access printer properties. “Printing a
Document” on page 13.
From the Layout tab, select the paper orientation.
From the Double-sided Printing section, select the
binding option you want.
Click the Paper tab and select the paper source, size, and
type.
Click OK and print the document.
NOTE: If your printer does not have a duplex unit, you should
complete the printing job manually. The printer prints every
other page of the document first. After printing the first side of
your job, the Printing Tip window appears. Follow the onscreen instructions to complete the printing job.
21
Advanced Printing
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
From the Paper tab, select Fit to Page in the Printing
Type drop-down list.
Select the correct size from the Output Size drop-down
list.
Select the paper source, size, and type in Paper Options.
Click OK and print the document.
Editing a Watermark
Using Watermarks
1
The Watermark option allows you to print text over an existing
document. For example, you may want to have large gray
letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally
across the first page or all pages of a document.
2
There are several predefined watermarks that come with the
printer, and they can be modified, or you can add new ones to
the list.
3
4
5
Using an Existing Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
Click the Extras tab, and select the desired watermark
from the Watermark drop-down list. You will see the
selected watermark in the preview image.
Click OK and start printing.
1
2
3
it is printed.
4
Creating a Watermark
2
3
4
5
6
Click OK until you exit the Print window.
Deleting a Watermark
NOTE: The preview image shows how the page will look when
1
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
Click the Extras tab and click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Select the watermark you want to edit from the Current
Watermarks list and change the watermark message and
options.
Click Update to save the changes.
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
Click the Extras tab, and click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Enter a text message in the Watermark Message box.
You can enter up to 40 characters. The message displays
in the preview window.
When the First Page Only box is checked, the watermark
prints on the first page only.
Select watermark options.
You can select the font name, style, size, or grayscale level
from the Font Attributes section and set the angle of the
watermark from the Message Angle section.
Click Add to add a new watermark to the list.
When you have finished editing, click OK and start
printing.
To stop printing the watermark, select <No Watermark> from
the Watermark drop-down list.
22
Advanced Printing
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
From the Extras tab, click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Select the watermark you want to delete from the Current
Watermarks list and click Delete.
Click OK until you exit the Print window.
Using a Page Overlay
Using Overlays
After an overlay has been created, it is ready to be printed with
your document. To print an overlay with a document:
1
2
What is an Overlay?
Dear ABC
Regards
WORLD BEST
An overlay is text and/or images stored in the computer hard
disk drive (HDD) as a special file format that can be printed on
any document. Overlays are often used to take the place of
preprinted forms and letterhead paper. Rather than using
preprinted letterhead, you can create an overlay containing the
exact same information that is currently on your letterhead. To
print a letter with your company’s letterhead, you do not need
to load preprinted letterhead paper in the printer. You need only
tell the printer to print the letterhead overlay on your
document.
3
4
5
To use a page overlay, you must create a new page overlay
containing your logo or image.
WORLD BEST
2
3
4
5
6
7
To change the print settings from your software
application, access printer properties. See “Printing a
Document” on page 13.
Click the Extras tab.
Select the desired overlay from the Overlay drop-down
list box.
If the overlay file you want does not appear in the
Overlay list, click Edit button and Load Overlay, and
select the overlay file.
If you have stored the overlay file you want to use in an
external source, you can also load the file when you access
the Load Overlay window.
Creating a New Page Overlay
1
Create or open the document you want to print.
6
Create or open a document containing text or an image for
use in a new page overlay. Position the items exactly as
you wish them to appear when printed as an overlay.
To save the document as an overlay, access printer
properties. See “Printing a Document” on page 13.
Click the Extras tab, and click Edit button in the Overlay
section.
In the Edit Overlay window, click Create Overlay.
7
After you select the file, click Open. The file appears in the
Overlay List box and is available for printing. Select the
overlay from the Overlay List box.
If necessary, click Confirm Page Overlay When
Printing. If this box is checked, a message window
appears each time you submit a document for printing,
asking you to confirm your wish to print an overlay on your
document.
If this box is not checked and an overlay has been
selected, the overlay automatically prints with your
document.
Click OK or Yes until printing begins.
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover).
Click Save. The name appears on the Overlay List box.
NOTE: The resolution of the overlay document must be the
Click OK or Yes to finish creating.
same as that of the document you will print with the overlay.
The selected overlay downloads with your print job and
prints on your document.
The file is not printed. Instead it is stored on your
computer hard disk drive.
Deleting a Page Overlay
NOTE: The overlay document size must be the same as the
documents you print with the overlay. Do not create an overlay
with a watermark.
You can delete page overlays that you no longer use.
1
2
3
4
5
6
23
Advanced Printing
In the printer properties window, click the Extras tab.
Click the Edit button in the Overlay section.
Select the overlay you want to delete from the Overlay
List box.
Click Delete Overlay.
When a confirming message window appears, click Yes.
Click OK until you exit the Print window.
5
Advanced
Using Windows
PostScript Driver
You can use advanced settings by clicking the Advanced
button.
If you want to use the PostScript driver provided with your
system CD-ROM to print a document.
PPDs, in combination with the PostScript driver, access printer
features and allow the computer to communicate with the
printer. An installation program for the PPDs is provided on the
supplied software CD-ROM.
Printer Settings
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
Your printer properties window may differ, depending on your
operating system. This software user guide shows the
Properties window for Windows XP.
• Paper/Output this option allows you to select the size of the
paper loaded in the tray.
• Graphic this option allows you to adjust the print quality for
your specific printing needs.
• Document Options this options allow you to set the PostScript
options or printer features.
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
NOTES:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
1. Click the Windows Start button.
2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences.
5. Change the settings on each tab, click OK.
Using Help
You can click
from the upper right corner of the window, and
then click on any setting.
24
Using Windows PostScript Driver
6
Sharing the Printer
Locally
Setting Up a Host Computer
1
2
3
4
5
6
You can connect the printer directly to a selected computer,
which is called “host computer,” on the network.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User Guide or online
help.
NOTES:
• Check the Operating System(s) that are compatible with
your printer. Please refer to the OS Compatibility section of
Printer Specifications in your Printer User Guide.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
Start Windows.
From the Start menu select Printers and Faxes.
Double-click your printer driver icon.
From the Printer menu, select Sharing.
Check the Share this printer box.
Fill in the Shared Name field, and then click OK.
Setting Up a Client Computer
1
2
3
4
5
6
25
Sharing the Printer Locally
Right-click the Windows Start button and select Explore.
Select My Network Places and then right-click Search
for Computers.
Fill in the IP address of host computer in Computer name
field, and click Search. (In case host computer requires
User name and Password, fill in User ID and password
of host computer account.)
Double-click Printers and Faxes.
Right-click printer driver icon, select Connect.
Click Yes, if the installation confirm message appears.
7
Using Utility Applications
Opening the Troubleshooting Guide
Double click the Status Monitor icon on the Windows task bar.
If an error occurs while printing, the Status Monitor window appears,
showing the error.
Double click this icon.
NOTES:
• To use the this program, you need:
- To check for Operating System(s) that are compatible with your
printer, refer to Printer Specifications in your Printer User
Guide.
- Internet Explorer version 5.0 or higher for flash animation in
HTML Help.
• If you need to know the exact name of your printer, you can check
the supplied CD-ROM.
Or, from the Start menu, select Programs or All Programs → your
printer driver icon → Troubleshooting Guide.
Changing the Status Monitor Program
Settings
Select the Status Monitor icon on the Windows task bar and right-click
on the Status Monitor icon. Select Options.
Using Printer Settings Utility
The following window opens.
Using the Printer Settings Utility, you can configure and check print
settings.
1
From the Start menu, select Programs or All Programs →
your printer driver icon → Printer Settings Utility.
2
3
Change the settings.
To send the changes to the printer, click the Apply button.
Using Onscreen Help
For more information about Printer Settings Utility, click
.
• Display when job is finished for network printer shows the
Status Monitor balloon when your job is complete.
• Display when error occurs during printing shows the Status
Monitor balloon when an error occurs during printing.
• Schedule an automatic status checking every allows the
computer to update the printer status regularly. Setting the value
close to 1 second causes the computer to check the printer status
more frequently, thereby allowing a faster response to any printer
error.
26
Using Utility Applications
8
Scanning
Scanning Using the WIA Driver
Your machine also supports the Windows Image Acquisition
(WIA) driver for scanning images. WIA is one of the standard
components provided by Microsoft Windows XP/Vista and
works with digital cameras and scanners. Unlike the TWAIN
driver, the WIA driver allows you to scan and easily manipulate
images without using additional software.
Scanning with your machine lets you turn pictures and text into
digital files on your computer. Then you can fax or e-mail the
files, display them on your web site or use them to create
projects that you can print using the WIA driver.
This chapter includes:
• Scanning Process with TWAIN-enabled Software
NOTE: The WIA driver works only on Windows XP/Vista with
• Scanning Using the WIA Driver
USB port.
NOTES:
• Check the Operating System(s) that are compatible
with your printer. Please refer to the OS Compatibility
section of Printer Specifications in your Printer User
Guide.
• You can check your printer name in the supplied CDROM.
• The maximum resolution that can be achieved
depends upon various factors, including computer
speed, available disk space, memory, the size of the
image being scanned, and bit depth settings. Thus,
depending on your system and what you are scanning,
you may not be able to scan at certain resolutions,
especially using enhanced dpi.
Windows XP
1
2
3
4
5
6
Place a single document face down on the document glass.
OR
Load the document(s) face up into the DADF (or ADF).
From the Start menu on your desktop window, select
Settings, Control Panel, and then Scanners and
Cameras.
Double click your scanner driver icon. The Scanner and
Camera Wizard launches.
Choose your scanning preferences and click Preview to
see how your preferences affect the picture.
Click Next.
Enter a picture name, and select a file format and
destination to save the picture.
Follow the on-screen instructions to edit the picture after it
is copied to your computer.
Scanning Process with TWAINenabled Software
7
If you want to scan documents using other software, you will
need to use TWAIN-compliant software, such as Adobe
Photoshop. The first time you scan with your machine, select it
as your TWAIN source in the application you use.
1
Place a single document face down on the document glass.
OR
Load the document(s) face up into the DADF (or ADF).
The basic scanning process involves a number of steps:
2
Click Start → Control Panel → Hardware and Sound →
Scanners and Cameras.
3
Click on Scan a document or picture. Then Windows
Fax and Scan application is opened automatically.
1
Windows Vista
Make sure that your machine and computer are turned on
and properly connected to each other.
2
Place a single document face down on the document glass.
3
4
5
Open an application, such as Photoshop.
NOTE:
• To view scanners, user can click on View scanners and
cameras.
• If there is not Scan a document or picture, open the MS paint
program and click From Scanner or Camera... on File menu.
Open the TWAIN window and set the scan options.
Scan and save your scanned image.
NOTE: You need to follow the program’s instructions for
acquiring an image. Please refer to the user guide of the
application.
27
Scanning
4
Click New Scan and then scan driver is opened.
5
Choose your scanning preferences and click Preview to
see your preferences affect the picture.
6
Click Scan.
NOTE: If you want to cancel the scan job, press the Cancel
button on the Scanner and Camera Wizard.
28
Scanning
9
Using Your Printer in
Linux
Installing the Unified Linux
Driver
You can use your machine in a Linux environment.
Installing the Unified Linux Driver
1
This chapter includes:
• Getting Started
2
• Installing the Unified Linux Driver
Make sure that you connect your machine to your
computer. Turn both the computer and the machine on.
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
• Using the Unified Driver Configurator
NOTE: You must log in as a super user (root) to install the
• Configuring Printer Properties
printer software. If you are not a super user, ask your system
administrator.
• Printing a Document
• Scanning a Document
3
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
Getting Started
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
The supplied CD-ROM provides you with Xerox’s Unified Linux
Driver package for using your machine with a Linux computer.
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
Xerox’s Unified Linux Driver package contains printer and
scanner drivers, providing the ability to print documents and
scan images. The package also delivers powerful applications
for configuring your machine and further processing of the
scanned documents.
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
After the driver is installed on your Linux system, the driver
package allows you to monitor a number of machine devices via
the USB. The acquired documents can then be edited, printed
on the same local or network machine devices, sent by e-mail,
uploaded to an FTP site, or transferred to an external OCR
system.
If you still failed to run the CD-ROM, type the followings
in sequence:
[root@localhost root]#umount/dev/hdc
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
The Unified Linux Driver package is supplied with a smart and
flexible installation program. You don't need to search for
additional components that might be necessary for the Unified
Linux Driver software: all required packages will be carried onto
your system and installed automatically; this is possible on a
wide set of the most popular Linux clones.
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
29
Using Your Printer in Linux
4
Uninstalling the Unified Linux Driver
When the welcome screen appears, click Next.
1
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
2
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
5
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
When the installation is complete, click Finish.
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
3
4
Click Uninstall.
5
Click Finish.
Click Next.
The installation program has added the Unified Driver
Configurator desktop icon and Xerox Unified Driver group
to the system menu for your convenience. If you have
any difficulties, consult the onscreen help that is available
through your system menu or can otherwise be called
from the driver package windows applications, such as
Unified Driver Configurator or Image Manager.
NOTE: Installing the driver in the text mode:
• If you do not use the graphical interface or have failed the
driver installation, you have to use the driver in the text
mode.
• Follow the step 1 to 3, then type [root@localhost Linux]# ./
install.sh, than follow the instruction on the terminal screen.
Then the installation completes.
• When you wan to uninstall the driver, follow the installation
instruction above, but type [root@localhost Linux]# ./
uninstall.sh on the terminal screen.
30
Using Your Printer in Linux
Printers Configuration
Using the Unified Driver
Configurator
Printers configuration has the two tabs; Printers and Classes.
Printers Tab
You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the Unified
Driver Configurator window.
Unified Linux Driver Configurator is a tool primarily intended for
configuring Printer or MFP devices. Since an MFP device
combines the printer and scanner, the Unified Linux Driver
Configurator provides options logically grouped for printer and
scanner functions. There is also a special MFP port option
responsible for the regulation of access to an MFP printer and
scanner via a single I/O channel.
Switches to Printer
configuration.
After installing the Unified Linux driver (see page A.3), the
Unified Linux Driver Configurator icon will automatically be
created on your desktop.
Shows all of the
installed printer.
Opening the Unified Driver
Configurator
1
2
Shows the status,
model name and
URI of your printer.
Double-click Unified Driver Configurator on the
desktop.
You can also click the Startup Menu icon and select Xerox
Unified Driver and then Unified Driver Configurator.
Press each button on the Modules pane to switch to the
corresponding configuration window.
You can use the following printer control buttons:
• Refresh: renews the available printers list.
• Add Printer: allows you to add a new printer.
• Remove Printer: removes the selected printer.
Printers Configuration button
• Set as Default: sets the current printer as a default
printer.
Scanners Configuration button
(for MFP device only)
• Stop/Start: stops/starts the printer.
• Test: allows you to print a test page to check if the
machine is working properly.
Ports Configuration button
• Properties: allows you to view and change the printer
properties. For details, see page 33.
3
You can use the onscreen help by clicking Help.
After changing the configurations, click Exit to close the
Unified Driver Configurator.
31
Using Your Printer in Linux
Classes Tab
Ports Configuration
The Classes tab shows a list of available printer classes.
In this window, you can view the list of available ports, check
the status of each port and release a port that is stalled in busy
state when its owner is terminated for any reason.
Shows all of the
printer classes.
Switches to
ports
configuration.
Shows all of the
available ports.
Shows the status of the
class and the number of
printers in the class.
Shows the port type,
device connected to
the port and status
• Refresh : Renews the classes list.
• Add Class... : Allows you to add a new printer class.
• Refresh : Renews the available ports list.
• Remove Class : Removes the selected printer class.
• Release port : Releases the selected port.
Sharing Ports Between Printers and Scanners
Scanners Configuration
Your machine may be connected to a host computer via the
USB port. Since the MFP device contains more than one device
(printer and scanner), it is necessary to organize proper access
of “consumer” applications to these devices via the single I/O
port.
In this window, you can monitor the activity of scanner devices,
view a list of installed Xerox MFP devices, change device
properties, and scan images.
Switches to
Scanners
configuration.
The Xerox Unified Linux Driver package provides an appropriate
port sharing mechanism that is used by Xerox printer and
scanner drivers. The drivers address their devices via so-called
MFP ports. The current status of any MFP port can be viewed
via the Ports Configuration. The port sharing prevents you from
accessing one functional block of the MFP device, while another
block is in use.
Shows all of the
installed scanners.
When you install a new MFP device onto your system, it is
strongly recommended you do this with the assistance of an
Unified Driver Configurator. In this case you will be asked to
choose I/O port for the new device. This choice will provide the
most suitable configuration for MFP’s functionality. For MFP
scanners I/O ports are being chosen by scanner drivers
automatically, so proper settings are applied by default.
Shows the vendor,
model name and type
of your scanner.
• Properties... : Allows you to change the scan properties
and scan a document. See page 34.
• Drivers... : Allows you to monitor the activity of the scan drivers.
32
Using Your Printer in Linux
Configuring Printer Properties
Printing a Document
Using the properties window provided by the Printers
configuration, you can change the various properties for your
machine as a printer.
1 Open the Unified Driver Configurator.
Printing from Applications
2
3
There are a lot of Linux applications that you are allowed to
print from using Common UNIX Printing System (CUPS). You
can print on your machine from any such application.
1 From the application you are using, select Print from the
File menu.
2 Select Print directly using lpr.
If necessary, switch to Printers configuration.
Select your machine on the available printers list and click
Properties.
The Printer Properties window opens.
3
In the LPR GUI window, select the model name of your
machine from the Printer list and click Properties.
Click.
4
The following five tabs display at the top of the window:
•General: allows you to change the printer location and
name. The name entered in this tab displays on the
printer list in Printers configuration.
•Driver: allows you to view or select another printer
driver. By clicking Options, you can set the default
device options.
•Jobs: shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed
jobs check box to see previous jobs on the job list.
•Classes: shows the class that your printer is in. Click
Add to Class to add your printer to a specific class or
click Remove from Class to remove the printer from the
selected class.
Click OK to apply the changes and close the Printer
Properties Window.
4
33
Using Your Printer in Linux
Change the printer and print job properties.
5
6
7
The following four tabs display at the top of the window.
•General - allows you to change the paper size, the paper
type, and the orientation of the documents, enables the
duplex feature, adds start and end banners, and changes
the number of pages per sheet.
•Text - allows you to specify the page margins and set the
text options, such as spacing or columns.
•Graphics - allows you to set image options that are used
when printing images/files, such as color options, image
size, or image position.
•Device: allows you to set the print resolution, paper
source, and destination.
Click OK to apply the changes and close the Properties
window.
Click OK in the LPR GUI window to start printing.
Scanning a Document
You can scan a document using the Unified Driver Configurator
window.
1 Double-click the Unified Driver Configurator on your
desktop.
2
3
Click the
button to switch to Scanners Configuration.
Select the scanner on the list.
Click your
scanner.
The Printing window appears, allowing you to monitor the
status of your print job.
To abort the current job, click Cancel.
Printing Files
You can print many different types of files on the Xerox machine
device using the standard CUPS way - directly from the
command line interface. The CUPS lpr utility allows you do that.
But the drivers package replaces the standard lpr tool by a
much more user-friendly Xerox LPR program.
To print any document file:
1 Type lpr <file_name> from the Linux shell command
line and press Enter. The LPR GUI window appears.
2
3
When you have only one MFP device and it is connected
to the computer and turned on, your scanner appears on
the list and is automatically selected.
When you type only lpr and press Enter, the Select
file(s) to print window appears first. Just select any files
you want to print and click Open.
In the LPR GUI window, select your printer from the list,
and change the printer and print job properties.
If you have two or more scanners attached to your
computer, you can select any scanner to work at any
time. For example, while acquisition is in progress on the
first scanner, you may select the second scanner, set the
device options and start the image acquisition
simultaneously.
For details about the properties window, see page 33.
Click OK to start printing.
NOTE: The scanner name shown in Scanners configuration
can be different from the device name.
4
5
6
34
Using Your Printer in Linux
Click Properties.
Load the document to be scanned face up into the ADF
(Automatic Document Feeder) or face down on the
document glass.
Click Preview in the Scanner Properties window.
10 When you are finished, click Save on the toolbar.
11 Select the file directory where you want to save the image
The document is scanned and the image preview appears
in the Preview Pane.
and enter the file name.
12 Click Save.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later
scanning.
To save a new Job Type setting:
1 Change the options from the Scanner Properties window.
Drag the pointer to
set the image area
to be scanned.
2
3
4
Click Save As.
Enter the name for your setting.
Click OK.
Your setting is added to the Saved Settings drop-down
list.
To save a Job Type setting for the next scan job:
Select the setting you want to use from the Job Type dropdown list.
2 Click Save.
1
7
Change the scan options in the Image Quality and Scan
Area sections.
•Image Quality: allows you to select the color
composition and the scan resolution for the image.
•Scan Area: allows you to select the page size. The
Advanced button enables you to set the page size
manually.
The next time you open the Scanner Properties window,
the saved setting is automatically selected for the scan
job.
To delete a Job Type setting:
Select the setting you want to delete from the Job Type
drop-down list.
2 Click Delete.
1
If you want to use one of the preset scan option settings,
select from the Job Type drop-down list. For details about
the preset Job Type settings, see page 35.
8
9
The setting is deleted from the list
You can restore the default setting for the scan options
by clicking Default.
When you have finished, click Scan to start scanning.
Using the Image Manager
The Image Manager application provides you with menu
commands and tools to edit your scanned image.
The status bar appears on the bottom left of the window
to show you the progress of the scan. To cancel scanning,
click Cancel.
The scanned image appears in the new Image Manager
tab.
Use these tools to
edit the image.
If you want to edit the scanned image, use the toolbar.
For further details about editing an image, see page 35.
35
Using Your Printer in Linux
You can use the following tools to edit the image:
Tools
Function
Saves the image.
Cancels your last action.
Restores the action you canceled.
Allows you to scroll through the image.
Crops the selected image area.
Zooms the image out.
Zooms the image in.
Allows you to scale the image size; you can
enter the size manually, or set the rate to
scale proportionally, vertically, or
horizontally.
Allows you to rotate the image; you can
select the number of degrees from the dropdown list.
Allows you to flip the image vertically or
horizontally.
Allows you to adjust the brightness or
contrast of the image, or to invert the
image.
Shows the properties of the image.
For further details about the Image Manager application, refer
to the onscreen help.
36
Using Your Printer in Linux
10
Using Your Printer with
a Macintosh
Installing Software for
Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
Install the Printer driver
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
NOTE: Some printers do not support a network
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User Guide.
1
2
3
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
4
• Printing
Connect your machine to the computer using the USB
cable or the Ethernet cable.
Turn on your computer and the machine.
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the MAC_Installer folder.
5
6 Double-click the MAC_Printer folder.
7 Double-click the Xerox Phaser 3300MFP_OSX icon.
8 Enter the password and click OK.
9 Click Continue.
10 Select Easy Install and click Install.
11 After the installation is finished, click Quit.
• Scanning
NOTE:
• After installation, you need to set up the connection between
the printer and your computer. See “Setting Up the Printer”
on page 38.
Uninstall the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
2
3
4
5
6
7
8
9
37
Using Your Printer with a Macintosh
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the MAC_Installer folder.
Double-click the MAC_Printer folder.
Double-click the Xerox Phaser 3300MFP_OSX icon.
Enter the password and click OK.
Click Continue.
Select Uninstall and then click Uninstall.
When the uninstallation is done, click Quit.
Install the Scan driver
1
2
3
Setting Up the Printer
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the MAC_Installer folder.
Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.
4
5 Double-click the Twain folder.
6 Double-click the Xerox Scan Installer icon.
7 Enter the password and click OK.
8 Click Continue.
9 Click Install.
10 After the installation is finished, click Quit.
For a Network-connected Macintosh
Uninstalling the Scan driver
1
1
2
3
4
5
6
7
8
9
NOTE: Some printers do not support a network
interface. Before connecting your printer, make sure
that your printer supports a network interface by
referring to Printer Specifications in your Printer User
Guide.
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the MAC_Installer folder.
2
Double-click the Twain folder.
3
Double-click the Xerox Scan Installer icon.
Follow the instructions on “Installing Software for
Macintosh” on page 37 to install the PPD file on your
computer.
Open Print Center or Printer Setup Utility from the
Utilities folder.
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Print & Fax.
Click Add on the Printer List.
•For MAC OS 10.5, press the “+” icon then a display
window will pop up.
Enter the password and click OK.
Click Continue.
4
Select Uninstall from the Installation Type and then Click
Uninstall.
When the uninstallation is done, click Quit.
For MAC OS 10.3, select the Rendezvous tab.
•For MAC OS 10.4, click Default Browser and find the
Bonjour.
•For MAC OS 10.5, click Default and find the Bonjour.
The name of your machine appears on the list. Select
XRX000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
5
For MAC OS 10.3, if Auto Select does not work properly,
select Xerox in Printer Model and your printer name in
Model Name.
•For MAC OS 10.4, if Auto Select does not work properly,
select Xerox in Print Using and your printer name in
Model.
•For MAC OS 10.5, if Auto Select does not work properly,
select Select a driver to use... and your printer name
in Print Using.
6
38
Using Your Printer with a Macintosh
Your machine appears on the Printer List and is set as the
default printer.
Click Add.
For a USB-connected Macintosh
1
2
3
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Print & Fax.
Click Add on the Printer List.
4
•For MAC OS 10.5, press the “+” icon then a display
window will pop up.
For MAC OS 10.3, select the USB tab.
5
6
Installable Options
Follow the instructions on “Installing Software for
Macintosh” on page 37 to install the PPD file on your
computer.
Open Print Center or Printer Setup Utility from the
Utilities folder.
After setting up for your printer, you can set some more
detailed options.
1
2
3
•For MAC OS 10.5, open System Preferences from the
Applications folder, and click Print & Fax.
Select your printer model name.
Click Show Info.
•For MAC OS 10.4, click Default Browser and find the
USB connection.
4
•For MAC OS 10.5, click Options & Supplies...
Select Installable Options tab.
•For MAC OS 10.5, click Default and find the USB
connection.
Select your printer name.
5
•For MAC OS 10.5, Select Driver tab.
Configure each items in Installable Options window.
•Tray n: If the machine have optional tray n, you have to
check the tray name.
For MAC OS 10.3, if Auto Select does not work properly,
select Xerox in Printer Model and your printer name in
Model Name.
•Duplex Unit: If the machine has duplex unit, you have t
o check this item.
•For MAC OS 10.4, if Auto Select does not work properly,
select Xerox in Print Using and your printer name in
Model.
6
•For MAC OS 10.5, if Auto Select does not work properly,
select Select a driver to use... and your printer name
in Print Using.
Your machine appears on the Printer List and is set as the
default printer.
7
Open Print Center or Printer Setup Utility from the
Utilities folder.
Click Add.
39
Using Your Printer with a Macintosh
•Printer Memory: If you installed additional printer
memory, you have to configure the size of memory.
Select Apply Change.
Changing Printer Settings
Printing
You can use advanced printing features when using your
printer.
From your Macintosh application, select Print from the File
menu. The printer name which appears in the printer properties
window may differ depending on the printer in use. Except for
the name, the composition of the printer properties window is
similar.
NOTES:
• The Macintosh printer’s properties window that appears in
this User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• You can check your printer name in the supplied CDROM.
NOTES: The setting options may differ depending on printers
and Macintosh OS version.
Layout Setting
Printing a Document
The Layout tab provides options to adjust how the document
appears on the printed page. You can print multiple pages on
one sheet of paper.
When you print with a Macintosh, you need to check the printer
software setting in each application you use. Follow these steps
to print from a Macintosh.
1
2
3
Select Layout from the list to access the following features. For
details, see “Printing Multiple Pages on One Sheet of Paper” on
the next column.
Open a Macintosh application and select the file you want
to print.
Open the File menu and click Page Setup (Document
Setup in some applications).
Choose your paper size, orientation, scaling, and other
options and click OK.
Make sure that your
printer is selected.
▲ Mac OS 10.4
•Pages per Sheet: This feature determines how many
pages printed on one page. For details, see“Printing
Multiple Pages on One Sheet of Paper” on page 41.
•Layout Direction: You can select the printing direction
on a page as like the examples on UI.
▲ Mac OS 10.4
4
5
6
Open the File menu and click Print.
Choose the number of copies you want and indicate which
pages you want to print.
Click Print when you finish setting the options.
40
Printing Multiple Pages on One Sheet
of Paper
Printer Features Setting
The Printer Features tab provides options for selecting the
paper type and adjusting print quality.
You can print more than one page on a single sheet of paper.
This feature provides a cost-effective way to print draft pages.
Select Printer Features from the list to access the following
features:
1
2
From your Macintosh application, select Print from the
File menu.
Select Layout.
▲ Mac OS 10.4
Image Mode
Image Mode allows the user to enhance printouts. The available
options are Normal and Text Enhance.
Fit to Page
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
Paper Type
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If you load a different type of print material, select the
corresponding paper type.
▲ Mac OS 10.4
3
4
Resolution(Quality)
The Resolution options you can select may vary
depending on your printer model. You can select the
printing resolution. The higher the setting, the sharper the clarity
of printed characters and graphics. The higher setting also may
increase the time it takes to print a document.
5
Toner Save Mode
Selecting this option extends the life of your toner cartridge and
reduces your cost per page without a significant reduction in print
quality.
41
Select the number of pages you want to print on one sheet
of paper on the Pages per Sheet drop-down list.
Select the page order from the Layout Direction option.
To print a border around each page on the sheet, select
the option you want from the Border drop-down list.
Click Print, and the printer prints the selected number of
pages on one side of each page.
Duplex Printing
Scanning
You can print on both sides of the paper. Before printing in the
duplex mode, decide on which edge you will be binding your
finished document. The binding options are:
You can scan docoments using Image Capture. Macintosh OS
offers Image Capture.
1 Make sure that your machine and computer are turned on
and properly connected to each other.
2 Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3 Start Applications and click Image Capture.
Long-Edge Binding: Which is the conventional layout
used in book binding.
Short-Edge Binding: Which is the type often used with
calendars.
1
2
4
5
From your Macintosh application, select Print from the
File menu.
Select the Layout.
Set the scan options on this program.
Scan and save your scanned image.
NOTE:
• For more information about using Image Capture, please
refer to the Image Capture's help.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
• Scan process differ according to TWAIN-compliant
softwares. Please refer to the user guide of the software.
• When scanning does not operate, update Mac OS to the
latest version. Scanning operates properly in Mac OS 10.3.9
or higher and Mac OS 10.4.7 or higher.
▲ Mac OS 10.4
3
4
Select a binding orientation from Two Sided Printing
option.
Click Print and the printer prints on both sides of the
paper.
CAUTION: If you have selected duplex printing and
then try to print multiple copies of a document, the
printer may not print the document in the way you
want. In case of "Collated copy" , if your document has
odd pages, the last page of the first copy and the first
page of the next copy will be printed on the front and
back of one sheet. In case of "Uncollated copy", the
same page will be printed on the front and back of one
sheet. Therefore, if you need multiple copies of a
document and you want those copies on both sides of
the paper, you must print them one at a time, as
separate print jobs.
42
SOFTWARE SECTION
INDEX
Symbols
37
A
advanced printing, use 19
B
booklet printing 20
C
canceling
scan 28
D
document, print
Macintosh 40
Windows 13
double-sided printing 21
E
Extras properties, set 17
F
favorites settings, use 18
G
printer driver
Windows 4
installing
Linux software 29
printer software
Macintosh 37
L
Layout properties, set
Macintosh 40
Windows 15
Linux
driver, install 29
printer properties 33
printing 33
scanning 34
M
Macintosh
driver
install 37
printing 40
scanning 42
setting up the printer 38
MFP driver, install
Linux 29
N
n-up printing
Macintosh 41
Windows 19
Graphics properties, set 16
O
H
help, use 18, 24
I
install
orientation, print 34
Windows 15
overlay
create 23
delete 23
print 23
43
P
Paper properties, set 15
paper size, set 15
print 34
paper source, set 34
Windows 15
paper type, set
Macintosh 41
print 34
poster, print 20
PostScript driver
installing 24
print
document 13
fit to page 21
from Macintosh 40
from Windows 13
N-up
Macintosh 41
Windows 19
overlay 23
poster 22
PRN 14
scaling 21
watermark 22
print resolution 34
printer driver, install
Linux 29
printer properties
Linux 33
printer properties, set
Macintosh 40
Windows 14, 24
printer resolution, set
Macintosh 41
Windows 16
printer software
install
Macintosh 37
Windows 4
uninstall
Macintosh 37
Windows 10
printing
booklets 20
double-sided 21
from Linux 33
R
resolution
printing 34
S
Linux 30
W
watermark
create 22
delete 22
edit 22
print 22
WIA, scan 27
scan driver
install
Macintosh 38
uninstall
Macintosh 38
scanning
Linux 34
TWAIN 27
WIA driver 27
scanning from Macintosh 42
setip software
install
Windows 11
setting
darkness 16
favorites 18
image mode 16
resolution
Macintosh 41
Windows 16
toner save 16
true-type option 16
software
install
Macintosh 37
Windows 4
reinstall
Windows 9
system requirements
Macintosh 37
uninstall
Windows 10
status monitor 26
T
toner save, set 16, 41
TWAIN, scan 27
U
uninstall, software
Windows 10
uninstalling
MFP driver
44
Rev. 2.00