Samsung UN75HU8550 User manual

user manual
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _______ Serial No. ___________________
If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
* This Nanum Gothic Eco font is provided by NAVER.
Warning! Important Safety Instructions
(Please read the Safety Instructions before using your TV.)
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To
ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings
must never be blocked or covered.
Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper
ventilation is provided.
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct
sunlight.
Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or
electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require
you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire
or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the
point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the
DC adaptor corresponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of
electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open
this apparatus.
English - 2
• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall
outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the
power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming
from it - unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the
house for an extended period of time (especially when children, elderly or disabled people will be left
alone in the house).
Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord
to generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center for information if you intend to install your TV in a location
with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate
24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to
your TV.
• Use only a properly grounded plug and wall outlet.
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall
outlet and power plug must be readily accessible at all times.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location
exposed to vibration.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a
service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft,
dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can damage the appearance of the TV or erase the printing on
the product.
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
• This product contains chemicals known to the State of California to cause cancer and
reproductive toxicity.
• Use care when touching the TV after it has been on for some time. Some parts can be
warm to the touch.
English - 3
Internet Security
Samsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions
and hacking. For example, certain sensitive communications between the TV and the Internet servers
are encrypted. In addition, the TV’s operating system has adopted controls to prevent the installation of
unauthorized applications.
Although we take steps to protect your SmartTV and information, no Internet-connected device or
transmission is completely secure. We therefore encourage you to take additional steps to safeguard your TV,
secure your Internet connection, and minimize the risk of unauthorized access. These steps are listed below:
• When Samsung releases software updates to improve the security on your TV, you should promptly install
these updates. To automatically receive these updates, turn on “Auto Update” in the TV’s menu (Support
> Software Update > Auto Update). When an update is available, a popup message appears on the TV
screen. Accept the software download and update by selecting YES when prompted. Take steps to secure
your wireless router and network. Your router’s manual should provide additional details about how to
implement the following measures:
• Secure your wireless router’s management settings with a unique password to prevent unauthorized
changes to security related settings.
• Implement standard encryption (e.g., WPA2 encryption) on your wireless router to secure your
wireless network signal.
• Secure access to your wireless network with a hard-to-guess password.
• Confirm your router’s firewall setting is enabled (if so equipped).
• Make sure all your Internet connected devices are behind your network’s firewall.
• If your router or modem has a standby mode button, use it to disconnect your home network from the
Internet when it is not in use.
• Use strong passwords for all your Internet accounts (Netflix, Facebook, Skype, etc.). If your TV has a
camera, recess the camera into the TV’s bezel when it is not in use. Recessing the camera makes it
inoperative.
• If any unexpected messages appear on your TV screen requesting permission to link a device or enable a
remote session, do NOT accept.
• Do not visit suspicious web sites and do not install any suspicious programs. We recommend users install
only those authorized apps provided by Samsung through Samsung Smart Hub.
English - 4
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual
product appearance. Product design and specifications may change without notice.
Features of your new TV
3D
This new feature lets you view 3D content.
SMART HUB
Your TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf
the web, download applications, and stay in touch with family and friends through social networking services.
In addition, you can view or play photo, video, and music files stored on external storage devices.
button to open the First Screen, and select the Panel icon. You will move to the Panel screen.
Press the
Choose a service using the icons displayed in the top part of the screen.
Smart Hub services and functionality include:
Games: You can view all game apps provided by Smart Hub and download and play games you select.
SAMSUNG APPS: Samsung Apps offers an extensive collection of free and for-pay news, sports, weather,
and gaming content you can download directly to and enjoy on your TV.
On TV: View a listing of programs that are currently airing or are scheduled to air. Select a program to
watch.
MOVIES & TV SHOWS: Purchase and stream movies and series directly from the Internet.
MULTIMEDIA: Play back photo, video, and music files from an external storage device.
Anynet+ (HDMI-CEC)
Lets you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.
e-Manual
Provides a detailed, on-screen user's manual built into your TV (page 22).
SMART Interaction
Access and control menu options and functions using motions. To use Smart Interaction, connect the SMART
TV camera (sold separately) to the TV.
Device Manager
Use the TV features with a USB or Bluetooth keyboard and mouse.
MHL & Screen Mirroring
Displays mobile device screens on the TV using a wired or wireless connection.
English - 5
Contents
01. Turning on the TV and
05. Using the e-Manual
Cabling
22 Launching the e-Manual
7
Turning on and Controlling the TV
7
Arrange the cables using the Cable
Holder
8
Upgrading the TV using a UHD
Evolution Kit (sold separately)
22 Additional e-Manual Features
23 Updating the e-Manual to the Latest
Version
06. Troubleshooting and
Maintenance
02. Using the Remote Control
9
24 Troubleshooting
Using the Remote Control
26 Network Troubleshooting
29 Eco Sensor and Screen Brightness
30 Getting Remote Support
03. Using the Samsung Smart
30 Caring for the TV
Control
11 Buttons and Functions
07. Specifications, wall
16 Switching Between Video Sources
16 Using the Remote Control to Control
External Devices
16 Connecting the IR Extender Cable
mounting, and other
information
31 Specifications
17 Setting Up the Universal Remote
Control
33 Dimensions
34 Hear the abundant sound
34 Licenses
04. Smart Hub
35 Mounting the TV on a Wall Using the
Wall Mount Kit (Optional)
36 Providing Proper Ventilation for Your
TV
37 Securing the TV to the Wall
38 Warranty Information
39 SAMSUNG BRAND PRODUCTS
English - 6
01.Turning on the TV and Cabling
Turning on and Controlling the TV
You can turn on the TV using the Samsung Smart Control or the TV’s Controller, a small joystick-like button on
the back of the TV in its lower-left corner. You can also use the TV's Controller to operate the TV without the
Samsung Smart Control.
Open Smart Hub.
Open the menu.
m
R
Select a source.
P
Turn off the TV.
TV Controller
The control stick is located on the
lower-left corner of the back of the TV.
Remote control sensor
When you use the Samsung Smart Control, the
standby LED does not light, except when you
press the P button.
Arrange the cables using the Cable Holder
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and ports are shown
below.
Cable Plugs
Ports
HDMI
USB
Optical
Warning
English - 7
Do not plug cables in upside down.
Be sure to check the orientation of the
plug before plugging it in.
Upgrading the TV using a UHD Evolution Kit (sold
separately)
No need to buy a new TV. You can upgrade your TV to the latest features and functions by replacing your older
One Connect with a UHD Evolution Kit from the latest year (sold separately). Experience the latest features and
services offered by Samsung Electronics via UHD Evolution Kit.
UHD Evolution Kit
(sold separately)
TV
The TV stand type
depends on the model.
UHD Evolution Kit is sold separately. Purchasing a UHD Evolution Kit allows you to upgrade the UHD Evolution
Kit’s software to the version from the year in which your UHD Evolution Kit was released. Not supported on all
models.
English - 8
02.Using the Remote Control
Using the Remote Control
The standard remote control is provided for ease of use.
Displays and selects the available
video sources.
Turns the TV on and off.
Turn on the backlight for the
buttons.
When on, the buttons become
illuminated for a moment when
pressed. (Using the remote
control with this button set to
On will reduce the battery usage
time.)
STB: Turns the satellite or cable
set-top box connected to the TV
on and off.
STB GUIDE: Displays the STB's
EPG (Electronic Program Guide).
STB MENU: Opens the STB's OSD
(Menu).
These buttons are only available
when the universal remote
control is set and the TV is on.
Gives direct access to channels.
Returns to the previous channel.
Press to select additional digital
channels being broadcast by the
same digital station. For example,
to select channel ‘54-3’, press ‘54’,
then press ‘-’ and ‘3’.
Cuts off the sound temporarily.
Changes channels.
Adjusts the volume.
Brings up Smart Hub applications.
See the e-Manual chapter, Smart
Features > Smart Hub.
Displays channel lists on the
screen.
Opens the OSD (Menu).
Displays the EPG
(Electronic Program Guide).
Displays frequently used
functions.
Displays information on the TV
screen.
Moves the cursor, selects the
on-screen menu items, and
changes the values seen on the
TV's menu.
Returns to the previous menu.
Exits the menu.
Use these buttons according to
the directions on the TV's screen.
B
C
3D: Turns the 3D image on or off.
CC: Controls the caption decoder.
Depending on the remote model,
this button can either be MTS or
P.SIZE.
MTS: Press to choose stereo,
mono, or Separate Audio
Program (SAP broadcast).
P.SIZE: Lets you choose the
picture size.
D
E-MANUAL: Displays the
e-Manual.
SEARCH: Launches the Search
function.
KEYPAD: Displays a virtual OnScreen Remote on the screen. See
the e-Manual chapter, Using the
Remote Control and Peripherals >
Using the Samsung Smart Control
> Displaying and Using the OnScreen Remote.
Use these buttons in a specific
feature.
Use these buttons according to
the directions on the TV's screen.
English - 9
Installing Batteries into the Remote Control
Match the polarity of the batteries to the symbols in the battery compartment.
NOTE
Use the remote control within 23 feet of the TV.
Bright light may affect the performance of the remote control. Avoid using near bright fluorescent lights
or neon signs.
The color and shape may vary depending on the model.
English - 10
03.Using the Samsung Smart
Control
Buttons and Functions
Microphone: Use the microphone with the Voice Control
and Voice functions.
MUTE: Cuts off the
sound temporarily.
The Voice Control function can be affected by
unclear pronunciation, voice level, or surrounding
noise.
Turns the TV on and off.
MIC
TV
SEARCH
KEYPAD
VOL
SOURCE
CH
VOICE
SEARCH: Launches the Search function.
KEYPAD: Displays the On-Screen Remote. See the
e-Manual chapter, Using the Remote Control and
Peripherals > Using the Samsung Smart Control >
Displaying and Using the On-Screen Remote.
SOURCE: Displays and lets you select video sources.
VOICE: Takes your voice commands and lets you enter
text using your voice.
Changes channels.
Adjusts the volume.
RETURN
EXIT
3D
SMART HUB
MTS
MENU
CC
GUIDE
CH.LIST
P.SIZE
Touch pad
Place a finger on the touch pad and move the Samsung
Smart Control. The pointer on the screen moves in the
direction you moved the Samsung Smart Control.
Press the touch pad to run the focused item.
Press and hold the touch pad to display the ContextSensitive Menus.
< > ¡ £: Moves the cursor, selects the on-screen
menu items, and changes the values seen on the TV's
menu.
M.SCREEN
RETURN: Returns to the previous menu.
SMART HUB: Brings up Smart Hub applications. See the
e-Manual chapter, Smart Features > Smart Hub.
To exit an application quickly, press the
button.
GUIDE: Displays the EPG (Electronic Program Guide).
Use these buttons with a specific feature and according
to the directions on the TV's screen.
MENU: Displays the menu on the screen.
M.SCREEN: You can split the TV screen and enjoy multiple activities - such as watching TV,
surfing the web, and watching a video - all at the same time.
3D: Turns the 3D function on or off. See the e-Manual chapter, Picture and Sound Settings > Viewing in 3D.
MTS: Press to choose stereo, mono, or Separate Audio Program (SAP broadcast).
CC: Controls the caption decoder and displays captions on the screen.
P.SIZE: Lets you choose the picture size.
English - 11
Installing Batteries into the Samsung Smart Control
To use the Samsung Smart Control, insert the batteries into the device referring to the figure below.
1. Gently pull on the battery cover's notch, and then remove the cover completely once it comes loose.
2. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.
3. Place the battery cover on the remote control and insert the top part of the cover into the remote control.
4. Press the catches on both sides of the battery cover in the order shown by the figure so that the cover is
completely attached to the remote control.
Using the Samsung Smart Control Motion Function to Operate the TV
The Samsung Smart Control has a motion sensor (gyro sensor) that lets you control the TV easily by moving the
Samsung Smart Control and using it much like a cordless mouse.
Place a finger on the Samsung Smart Control's touch pad, and then move the Samsung Smart Control. A
pointer appears on the screen. Move the Samsung Smart Control, and the pointer moves on the screen in the
direction you moved the Samsung Smart Control and the same distance. Highlight an item on the screen with
the pointer, and then press the touch pad to select it.
You can also move the Samsung Smart Control in the same fashion to scroll scrollable screens up and down.
If you remove your finger from the touch pad, even momentarily, the Motion Function stops. To re-start
the function, put your finger on the touch pad again, and then move the Samsung Smart Control.
If Voice Guide is set to On, the Samsung Smart Control's motion sensor does not work. For the motion
sensor in the Samsung Smart Control to work, you must set Voice Guide to Off.
English - 12
Using the Touch Pad and the Directional Buttons
In the TV's menu, navigate to Support > Smart Control Tutorial to view a tutorial that shows how to use
the touch pad.
If the touch pad's sensitivity is too high or low, navigate to the System > Smart Control Settings menu, and
then select the Touch Sensitivity option to change the touch pad sensitivity.
Moving the Focus or Pointer
Entering the Menu / Selecting an Item
Press the directional buttons (up, down, left, and
right) to move the focus, pointer, or cursor in the
direction you want.
To enter a menu or select an item, highlight the
item or the menu title, or move the pointer over
it, and then press the touch pad.
Displaying Context-sensitive Menus in
Smart Hub
Changing the Smart Hub Panel
In Smart Hub, highlight an item, and then press
and hold the touch pad. The context-sensitive
menu for the item pops up.
On a Smart Hub panel, drag left or right on
the touch pad. The previous or next Smart Hub
panel appears.
The context-sensitive menu may vary
depending on the item you selected.
Scrolling on the Web Browser
When you are using the web browser, drag up or
down on the touch pad to scroll the web screen.
English - 13
Reconnecting the Samsung Smart Control to the TV
If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem
persists, pair the Samsung Smart Control and TV again.
1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control
sensor.
Remote Control Sensor
2. Press the RETURN button and GUIDE button simultaneously for 3 seconds or more.
3. The connecting icon appears on the screen. A few moments later, the connected icon appears. The
Samsung Smart Control is paired to the TV.
The Low Battery Alarm Window
If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen. When the
Alarm appears, replace the batteries. We recommend using alkaline batteries for longer operating life.
<Low battery Alarm Icon>
English - 14
Displaying and Using the On-Screen Remote
Press the KEYPAD button on the Samsung Smart Control to display the On-Screen Remote on the TV's screen.
Use the On-Screen Remote to enter numbers, control content playback, and use the features and functions of
the TV, just like a real remote. Use the directional buttons on the Samsung Smart Control to move the cursor
on the On-Screen Remote. Press the touch pad on the Samsung Smart Control to select.
The On-Screen Remote buttons may vary depending on the TV features or functions you are using.
Button
Description
Lets you switch channels by entering channel numbers directly. Select Pre-CH to
return to the previous channel.
Controls the playback of video, photo, or music files from all sources, and the
playback of media content on external devices (for example, a Blu-ray player).
a, b, {, }
TOOLS
INFO
MENU
Speaker Settings
PIP
Multi-Link Screen
CC
P.Size
SLEEP
P.Mode
Web Browser
e-Manual
Sign In
Use these colored buttons to access additional options specific to the feature in use.
Press to display the Tools menu while you are watching TV. The Tools menu gives
you easy access to frequently used functions. The functions listed are contextsensitive and vary depending on how you are currently using the TV.
Shows information about the current digital broadcast program or content.
Displays the TV's menu on the screen.
Lets you select the speakers which will play the TV's audio. You must connect a
home theater or amplifier with external speakers to the TV to use this function.
Lets you display video from an external device or computer on the main screen and
a TV broadcast in a picture-in-picture window.
Lets you split the TV screen and use multiple functions - such as watching TV,
surfing the web, and playing a video - at the same time.
Select to turn subtitles on or off.
Changes the picture size.
This function automatically shuts off the TV after a preset period of time.
Lets you select the Picture Mode.
Launches the Web Browser.
Opens the e-manual.
Select to log in to or out of your Samsung account.
Move to the right / Move to the left: Moves the Onscreen Remote on the screen.
Large size / Normal size: Resizes the Onscreen Remote on the screen.
Alternatively, navigate to the System > Smart Control Settings menu and select
and set the Onscreen Remote Size option.
Motion Sensitivity: Put a finger on the touch pad and move it to adjust the speed of
the pointer on the screen.
Navigate to System > Smart Control Settings, and select Motion Sensitivity to
enable this option.
Touch Sensitivity: Lets you change the touch pad sensitivity.
Alternatively, navigate to the System > Smart Control Settings menu and select
and set the Touch Sensitivity option.
Universal Remote Setup: Displays the Universal Remote Setup screen.
Cancel: Select to close a pop up menu.
English - 15
Switching Between Video Sources
Press the SOURCE button to switch between external devices connected to the TV. For example, to switch to
a game console connected to the second HDMI connector, press the SOURCE button. The Source List appears
across the top of the screen. From the Source list, select HDMI2.
The connector names may vary depending on the product.
Using the Remote Control to Control External Devices
MENU > System > Universal Remote Setup
The universal remote control feature lets you control cable boxes, Blu-ray players, home theaters, and other
third-party external devices connected to the TV using the TV's remote control. For each external device you
want to control, you must run the universal remote set up process. The first step in the process is connecting
the IR extender cable (included) to the TV and positioning the transmitter end of the cable in front of the
device you want to control.
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's
remote control without any additional setup.
Connecting the IR Extender Cable
The color and design of the IR extender cable may vary depending on the model.
4 inches
To begin the universal remote set up process, connect the IR extender cable (included) to the TV's IR output
connector as shown in the diagram, and then position the transmitter end within 4 inches (10 cm) of the
external device's remote control sensor, pointing in the direction of the sensor.
There can be no obstacles between the transmitter end of the IR extender cable and the external device. Any
obstacles will interfere with the transmission of the remote control signals.
English - 16
Setting Up the Universal Remote Control
If you want to control a set-top-box, you need to have your zip code and your cable provider's name and
location on hand before you begin. If you want to control a Blu-ray player or home theater, you need the
manufacturer's name and model number.
1. Turn on the external device you want to control with the universal remote function.
2. Press the SOURCE button on your remote to bring up the Source screen.
3. Select the Universal Remote Setup icon.
You can also start Universal Remote Setup through the TV's menu. Navigate to System > Universal
Remote Setup.
4. The TV checks if the IR extender cable is connected. If it confirms the connection, press the touch pad.
5. Select the type of device you want to control - set-top-box, Blu-ray player, or home theater.
6. Follow the directions on the screen to complete the set up and register the device. The directions will be
different, depending on the device you want to control.
7. Once set up is complete and you have confirmed that you can use the TV remote to control the device,
disconnect the IR extender cable from the TV and set it aside. You can now control the device directly with
your remote.
Controlling an External Device with the TV Remote
During the universal remote set up process, the TV registers the connector (source) the external device is
connected to. To control a registered external device with your TV's remote, select the external device on the
Source List.
1. Press the SOURCE button on your remote.
2. Select the source the device is connected to (HDMI1, HDMI2, etc.)
3. Control the device with the remote. For example, if the device is a set-top-box, press the channel buttons
on the remote to change the channel.
For information on additional functions, see "Controlling External Devices with the TV Remote - Using the
Universal Remote" in the e-Manual.
English - 17
04.Smart Hub
Smart Hub is the control center of the TV. Through Smart Hub you can view TV program schedules and select
shows to watch, download and install apps and games, select and stream movies and TV shows, and playback
photo, video, and music files located on Blu-ray players, USB devices, smart phones and tablets, your computer,
and the Internet.
Smart Hub has five main panels: Games, SAMSUNG APPS, On TV, MOVIES & TV SHOWS, and MULTIMEDIA.
To move from panel to panel, select one of the icons at the top of the screen. You can also swipe left or right
across the touch pad to display the previous or next panel. Each panel gives you access to additional screens. To
open the additional screens, select items on the panel or select an icon or hotspot on the screen.
The TV must be connected to the Internet to access Smart Hub.
Games Panel
The Games panel displays games you can download to and play on your TV. You can also update or delete
downloaded games. The Games panel has two sub-panels: All Games and My Page. All Games displays all the
games available through Smart Hub. My Page displays the games you have downloaded. Most games listed on
the Games panel are free, while some require a fee. To download a for-pay game, you must have a Samsung
Account with a registered credit card.
Basic Games Panel Functions
In the My Page or All Games panel, move the focus to a game, and then press and hold the touch pad. An
Options drop down list appears with the following functions.
• Download/Remove: Downloads games to the TV or removes games from the TV.
• View detail: Displays detailed information about the selected game.
Quickly Downloading and Installing a Game
Select a game, and then press and hold the touch pad. When the Options drop down list appears, select
Download from the list. If the game is free, the game you selected is installed on the TV. If the game is not free,
follow the directions on the screen to pay for and download the game.
SAMSUNG APPS Panel
The SAMSUNG APPS panel displays a variety of free and for pay news, sports, weather, and gaming apps.
The Samsung Apps panel has a number of sub-panels including Most Popular, What's new, and Categories.
Default apps install automatically when Smart Hub is first launched. The default apps may differ depending on
your region. Most apps listed on the SAMSUNG APPS panel are free, but some apps require a fee. To download
these, you must have a Samsung Account with a registered credit card.
English - 18
SAMSUNG APPS Panel Functions
Move the focus to an app, and then press and hold the touch pad. An Options drop down list appears with the
following functions.
• Move: Relocates an app on the screen.
• Delete: Removes a selected app from your TV.
• Multi Delete: Removes multiple apps from the TV.
• View Details: Displays detailed information about a selected app.
• Change View: Changes how the apps are sorted on the screen, by Custom view or Most Played.
• Lock/Unlock: Locks or unlocks apps. Locked apps cannot be accessed.
• Update Apps: Displays a list of apps that have updates available. You can select which apps to update.
The SAMSUNG APPS Panel functions are context-sensitive. The functions that appear may differ depending on
the app you select.
Downloading and Installing an App
1. On the SAMSUNG APPS panel, select Most Popular, What's new, or Categories.
2. Move the focus to an app, and then press and hold the touch pad. When the Options drop down list
appears, select Download from the list. If the app is free, the app you selected is installed on the TV. If the
app is not free, follow the directions on the screen to pay for and download the app.
On TV Panel
On TV displays your current program live in a small window, a list of recommended programs currently on
other channels, and a list of recommended programs that will air later. Use these lists to change the channel,
view more information about recommended programs running later, including how much time is left until they
air. You can also set up a Schedule Viewing of a program that hasn’t aired yet.
To view a program recommended by On TV, select the image.
The On TV panel has the following main subpanels:
• Guide: Displays the program schedule of each digital channel. You can check the program schedule and
set up a Schedule Viewing.
• Timeline View: Displays program recommendations for different times of the day.
• Trending: Displays what is the most trendy or popular content on Twitter, You can set up a Schedule
Viewing to view.
On TV Panel Functions
Move the focus to a program, and then press and hold the touch pad. An Options drop down list appears with
the following functions.
• View details: Displays detailed information about the selected program.
• Reserving: Sets up a Schedule for the selected program.
English - 19
MOVIES & TV SHOWS Panel
Buy or rent movies and TV shows online and stream them to your TV using apps downloaded via Smart Hub.
This is called Video on Demand (VOD). The MOVIES & TV SHOWS screen displays recommended movies and
TV shows and displays multiple VOD content sources so you can browse and watch all more easily.
The MOVIES & TV SHOWS panel has the following main subpanels:
• Favorites: View the movies and TV programs registered as Favorites.
• Featured: View movies or TV programs grouped according to various themes, such as movies with a
specific actor or an actor who acted in a TV series, etc.
• Movies: View movies by release date, popularity, or genre.
• TV Shows: Search TV shows by air date, popularity, or genre.
• Trailers: View movie trailers for upcoming movies.
• Trending: View movies and TV programs that are the most trendy or popular on Twitter.
Basic MOVIES & TV SHOWS Panel Functions
Move the focus to a movie or TV program, and then press and hold the touch pad. An Options drop down list
appears with the following functions.
• Play Content Now: Displays the names of one or more content providers. Select a content provider to play
the selected movie or TV program immediately. If the app for the content provider you selected is not
installed on the TV, a pop-up window appears. In the pop-up window, select either to display the app’s
information page or to install the app immediately. Note that you can also install the app from the app’s
information page.
• Add to/Remove from Favorites: Add the selected content to or delete it from Favorites.
MULTIMEDIA
The MULTIMEDIA Panel lets you play media content saved on USB devices, smartphones, cameras, computers,
or in storage services. The MULTIMEDIA Panel has three main subpanels: USB Drive, Network Device, and
Storage Service. USB Drive displays USB devices connected to the TV. Network Device displays devices
connected to your TV through your home network (a computer, a smart phone, etc.). Storage Service displays
services such as Dropbox and SkyDrive linked via your Samsung account to the TV.
English - 20
Allowing Connections with a Computer or Mobile Device
To play multimedia content located on a computer or mobile device on the TV, you need to:
1. Establish the connection to the computer or device.
2. Allow the connection with the computer/mobile device on the TV.
For information about establishing connections, see the “Connecting to a Computer” and “Connecting to a
Mobile Device” sections of the e-Manual.
To allow a connection with a computer or mobile device, follow these steps:
1. Select Network Device in the MULTIMEDIA panel. The devices connected to the TV are listed.
2. Select Options > Multimedia device settings. The devices connected to the TV are listed.
• Alternatively, select Multimedia Device Settings from the Network menu to see the list of the devices
connected to the TV.
3. Allow the connection with the device you want to connect to the TV.
Playing Content
1. If you want to play content located in a Storage Service, navigate to the Smart Hub > Samsung Account
menu, and then select Log In to sign in to your Samsung account. If you want to play content located on a
device connected to the TV using Samsung Link, go to Step 2 below.
2. Select Network Device or Storage Service in the MULTIMEDIA panel. The devices or storage services
connected to the TV appear.
3. Select a device or storage service. The folders and files shared by the selected device or storage service
appear.
4. Select the media content you want to play from the list.
English - 21
05.Using the e-Manual
Launching the e-Manual
MENU > Support > e-Manual
The embedded e-manual contains information about your TV's key features.
Alternatively, you can download a copy of the e-manual from Samsung's website, and read it on your
computer or print it out.
Words in yellow (e.g., Picture Mode) indicate a menu item and bold words in white (e.g., Smart Hub)
indicate remote control buttons.
Arrows are used to indicate the menu path. (Example: MENU > Picture > Picture Mode)
1. On the Samsung Smart Control, press the KEYPAD button, and then select e-Manual on the On-Screen
Remote. You can also select Support > e-Manual in the TV's menu.
2. Select a category from the left side of the screen. Once a selection has been made, the contents of the
selected category appear on the right side of the screen.
3. Select an item from the list. This opens the e-manual on the corresponding page.
If a description doesn't fit on a single screen...
• Position the focus on the page to display
page up and down.
/
on the screen. Press the < or > buttons to scroll the
Additional e-Manual Features
Loading Pages using Keywords
Select Search to bring up the search screen. Enter a search term, and then select Done. Select an item from the
search results to load the corresponding page.
English - 22
Loading Pages from the Index Page
Select Index to bring up the index screen. Select a keyword from the list to navigate to the relevant page.
Using History to Load Previously Read Pages
Select Opened page. A list of previously read pages is shown. Select a page. The e-Manual jumps to the
selected page.
Accessing the Menu from the e-Manual
Select
(Try Now) from the right side of a feature-description page to access the corresponding menu item
and try out the feature right away. If you want to read the e-Manual entry on a specific screen menu feature:
• On the Samsung Smart Control, press the KEYPAD button, and then select e-Manual on the On-Screen
Remote to load the corresponding e-Manual page.
The e-Manual cannot be accessed from some menu screens.
Loading Reference Pages
Select
(Link) from the right side of a feature-description page to access the corresponding reference page.
Updating the e-Manual to the Latest Version
You can update the e-Manual in the same way you update apps.
1. Select e-Manual item in the SAMSUNG APPS screen.
2. On the Samsung Smart Control, press and hold the touch pad. A pop-up menu appears.
3. Select Update Apps from the pop-up menu. A pop-up window appears.
Update Apps appears on the screen only when an update is available.
4. Select e-Manual in the popup window, and then select Update.
Configuring Auto Update
MENU > Smart Hub > Apps Settings
To update the e-manual automatically, navigate to the Smart Hub > Apps Settings menu and set the Auto
Update option to On. The e-manual is updated automatically when an update becomes available.
English - 23
06.Troubleshooting and
Maintenance
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solutions. Also, review the
Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/
support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
Issues
Solutions and Explanations
Flickering and Dimming
Try disabling some of the TV's energy efficiency features.
Disable Energy Saving (System > Eco Solution > Eco Sensor) and/or Energy
Saving (System > Eco Solution > Energy Saving) and check again.
Screen Color is Not Correct
Run a Self Diagnosis Picture Test (Support > Self Diagnosis > Picture Test).
If the picture problem is caused by the TV, the problem should be visible
in the Picture Test. If the problem is not visible, next confirm that the TV's
video input ports are connected to the correct external video device output
ports and that none of the connections are loose. Finally, if possible, test
your external video devices by connecting them to another TV.
Screen Brightness
Adjust the following settings:
Navigate to Picture and adjust Backlight, Contrast, Brightness, Sharpness,
Color, Tint (G/R) and other picture quality adjustment settings.
Blurred Images
Turn on Auto Motion Plus (Picture > Picture Options > Auto Motion Plus).
Unwanted Powering Off
Check if Sleep Timer (System > Time > Sleep Timer) has been enabled.
Sleep Timer automatically turns off the TV after an amount of time that
you select. If the Sleep Timer has not been enabled, see if No Signal Power
Off (System > Eco Solution > No Signal Power Off) or Auto Power Off
(System > Eco Solution > Auto Power Off) has been enabled. No Signal
Power Off turns off the TV if no signal has been received by the TV for a
specified period time. Auto Power Off turns off the TV if there has been no
user input in four hours.
Trouble Powering On
Confirm that the power cord is connected and that the remote has live
batteries and is functioning correctly. If the power cord is connected
properly and the remote control is operating normally, there might be
a problem with the antenna cable connection or the cable/satellite box
might not be turned on. Check the antenna connection or turn on the
cable/satellite box.
Stand Assembly
If you have any trouble assembling the stand, review the stand assembly
instruction in the Quick Start Guide.
Cannot Find a Channel
Re-run Setup (Go to MENU > System > Setup) or run Auto Program. (Go to
MENU > Broadcasting > Auto Program).
For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/spsn.
English - 24
Issues
Solutions and Explanations
The TV won’t turn on.
Make sure the AC power cord is securely plugged in to the wall outlet and
the TV.
Make sure the wall outlet is working.
Try pressing the P button on the TV to make sure the problem is not the
remote. If the TV turns on, refer to “Remote control does not work” below.
There is no picture/video.
Check the cable connections. Remove and reconnect all cables connected
to the TV and external devices.
Set the video outputs of your external devices (Cable/Sat Box, DVD, Bluray etc) to match the TV's input connections. For example, if an external
device’s output is HDMI, it should be connected to an HDMI input on the
TV.
Make sure your connected devices are powered on.
Be sure to select the correct input source.
Reboot the connected device by unplugging it, and then reconnecting the
device’s power cable.
The remote control does not
work.
Replace the remote control batteries. Make sure the batteries are installed
with their poles (+/–) in the correct direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote
control doesn’t turn the
TV on or off or adjust the
volume.
Program the Cable/Set remote control to operate the TV. Refer to the
Cable/Set-Top-Box user manual for the SAMSUNG TV code.
This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There
may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the
performance of the product.
To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto
Update functions on the TV's menu (Screen MENU > Support > Software Update > Update now or Screen
MENU > Support > Software Update > Auto Update).
English - 25
Network Troubleshooting
How to Improve Your Wireless Signal
Position your wireless router, modem router, or access point in a central location.
The best place for a Wi-Fi router is in the center of your home.
If that is not possible, move it as close to the center of your home as possible. Avoid putting it in a corner.
Single Story
Bad Router Position
Good Router Position
Bad Router Position
Good Router Position
Multi Story
English - 26
Adding a wireless repeater
A wireless repeater is a device which extends your wireless network's range without requiring you to add any
wiring. All you need to do is place the repeater halfway between your wireless router and your TV, and you will
get an instant boost in your wireless signal strength.
Single Story
Multi Story
Wireless router
Wireless repeater
Do not locate the router on the floor and keep it away from walls and metal objects
Avoid placing the router near objects such as metal filing cabinets. Metal objects, walls, and floors will
interfere with your router's wireless signal. The closer your router is to these obstructions, the more severe the
interference, and the weaker the signal.
Reduce wireless interference
The most common wireless technology, 802.11g (wireless-G), operates at a frequency of 2.4GHz. Many
cordless phones, microwave ovens, baby monitors, garage doors, and other wireless devices also use this
frequency. Reduce interference by avoiding wireless devices that use the 2.4GHz frequency and use devices
that communicate via the 5.0 GHz frequency instead.
Replace your router's antenna
If you must place your router in the corner, consider replacing
your standard antenna with a Hi-Gain wireless antenna.
High gain antennas can be attached to most wireless routers.
They boost the signal strength and aim the signal in one
direction.
English - 27
Intermittent Wi-Fi
• Check the distance between the Modem/Router and the TV. The distance should not exceed 50ft (15.2
m).
• Verify that there are no obstacles between your TV and the Modem/Router.
(Appliances, cordless phones, stone walls/fireplaces, etc. decrease Wi-Fi strength.)
• Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see
if it is in good condition. If it is not, replace the cable.
• Connect the TV to your Modem/Router using a CAT 7 cable, and then try to set up a wired network
connection. (MENU > Network > Network Settings).
• Check Network Status (MENU > Network > Network Status) to see if the IP address is invalid, for example,
169.x.x.x. If it is, call your ISP to get a valid IP address, and then ask them to check the connection
between your Modem and Router and the connection between the Modem / Router and the Internet.
• If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the
Mac addresses of your new Modem/Router and the TV.
Netflix problems
• Verify that your Modem/Router is no more than 50 ft (15.2 m) away from the TV.
• Change the DNS to 8.8.8.8. Select MENU > Network > Network Status > DNS Server > Select Manually >
DNS > enter 8.8.8.8 > OK
• Verify that the ESN for Netflix is valid. (Go to MENU > Support > Contact Samsung)
Reset Netflix by selecting MENU > Smart Hub > Smart Hub Reset.
Smart Hub Error Messages
• Verify that the distance between the TV and the Modem/Router does not exceed 50 ft (15.2 m).
• Verify that the TV is connected to the network by checking the Network Status (MENU > Network >
Network Status).
• Reset Smart Hub by selecting the MENU > Smart Hub > Smart Hub Reset.
• Update the TV’s software (MENU > Support > Software Update).
• Wait 2 to 3 days for the issue to resolve itself.
English - 28
Eco Sensor and Screen Brightness
Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce
power consumption. This causes the TV to brighten and dim automatically. If you want to turn this off, go to
MENU > System > Eco Solution > Eco Sensor.
Do not block the sensor with any object. It can decrease picture brightness.
Preventing burn-in.
Avoid keeping a still picture or a picture with static elements (black bars, black borders, logos, etc.) on your
TV for more than two hours at a time. If that is unavoidable, change the picture or change to another channel
for a minute or two every couple of hours. Reducing the brightness and contrast of the screen when it is
displaying static elements will also help.
English - 29
Getting Remote Support
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can
remotely:
• Diagnose your TV
• Adjust the TV settings for you
• Perform a factory reset on your TV
• Install recommended firmware updates
How Does Remote Support Work?
Having a Samsung Tech remotely service your TV is easy.
1. Call the Samsung
2. Open the menu on
Contact Center
and ask for remote
support.
your TV and go to
the Support section.
3. Select Remote
Management,
and then read and
agree to the service
agreements. When the
PIN screen appears,
provide the PIN
number to the agent.
4. The agent will then
access your TV.
That's it!
Caring for the TV
If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please
clean the debris off before watching TV.
The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and
screen carefully using a soft cloth to prevent scratches.
Do not spray water or any liquid directly onto the TV.
Any liquid that goes into the product may cause a
failure, fire, or electric shock.
Turn off the TV, and then gently wipe away smudges
and fingerprints on the screen with a micro-fiber
cloth. Clean the body of the TV with a soft cloth
dampened with a small amount of water. Do not
use flammable liquids (benzene, thinners, etc.) or a
cleaning agent. For stubborn smudges, spray a small
amount of screen cleaner on the cloth.
English - 30
07.Specifications, wall mounting,
and other information
Specifications
Display Resolution
3840 x 2160
Environmental Considerations
Operating Temperature
50°F to 104°F (10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F (-20°C to 45°C)
Storage Humidity
5% to 95%, non-condensing
Stand Swivel (Left / Right)
Model Name
0˚
UN50HU8500 / UN50HU8550
UN55HU8500 / UN55HU8550
Screen Size
50˝ Class
55˝ Class
(Diagonal)
(49.5 measured diagonally)
(54.6 measured diagonally)
Sound
(Output)
60W
(Front TW (10W+10W) + Front Mid (10W+10W) + Woofer (10W+10W))
Dimensions (W x H x D)
Body
43.9 x 25.3 x 1.3 inches
48.3 x 27.7 x 1.3 inches
(1115.5 x 643.9 x 35.1 mm)
(1228.2 x 705.8 x 35.2 mm)
43.9 x 27.0 x 10.6 inches
48.3 x 29.3 x 10.6 inches
(1115.5 x 685.9 x 269.9 mm)
(1228.2 x 745.9 x 269.9 mm)
Without Stand
32.4 lbs (14.7 kg)
39.2 lbs (17.8 kg)
With Stand
39.6 lbs (18.0 kg)
46.5 lbs (21.1 kg)
UN60HU8500 / UN60HU8550
UN65HU8500
With stand
Weight
Model Name
Screen Size
60˝ Class
65˝ Class
(Diagonal)
(60.0 measured diagonally)
(64.5 measured diagonally)
Sound
(Output)
60W
(Front TW (10W+10W) + Front Mid (10W+10W) + Woofer (10W+10W))
Dimensions (W x H x D)
Body
With stand
53.5 x 30.9 x 1.4 inches
57.0 x 32.8 x 2.0 inches
(1360.2 x 785.6 x 36.8 mm)
(1449.3 x 833.4 x 51.4 mm)
53.5 x 32.5 x 10.6 inches
57.0 x 34.3 x 11.6 inches
(1360.2 x 826.0 x 269.9 mm)
(1449.3 x 873.5 x 294.9 mm)
Without Stand
49.1 lbs (22.3 kg)
57.7 lbs (26.2 kg)
With Stand
56.4 lbs (25.6 kg)
66.1 lbs (30.0 kg)
Weight
English - 31
Model Name
UN65HU8550
UN75HU8500 / UN75HU8550
Screen Size
65˝ Class
75˝ Class
(Diagonal)
(64.5 measured diagonally)
(74.5 measured diagonally)
Sound
(Output)
60W
(Front TW (10W+10W) + Front Mid (10W+10W) + Woofer (10W+10W))
Dimensions (W x H x D)
Body
57.0 x 32.8 x 1.4 inches
65.9 x 37.8 x 1.4 inches
(1449.3 x 833.4 x 36.4 mm)
(1676.2 x 961.1 x 37.6 mm)
57.0 x 34.3 x 11.6 inches
65.9 x 39.6 x 13.3 inches
(1449.3 x 873.5 x 294.9 mm)
(1676.2 x 1006.4 x 340.0 mm)
Without Stand
54.2 lbs (24.6 kg)
81.1 lbs (36.8 kg)
With Stand
62.6 lbs (28.4 kg)
96.3 lbs (43.7 kg)
With stand
Weight
Design and specifications are subject to change without prior notice.
The actual appearance of the TV may differ from the images in this manual, depending on the model.
This device is a Class B digital apparatus.
For information about the power supply, and more information about power consumption, refer to the
label attached to the product.
Typical power consumption is measured according to Energy Star Program requirements for televisions.
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Decreasing Power Consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of
power. To decrease power consumption, unplug the power cord when you don't intend to use the TV for a
long time.
English - 32
Dimensions
Port panel detail / Rear view
2
1
4
7
6
5
3
The displayed image may differ depending on the model.
(Unit: inches)
Model name
UN50HU8500 / UN50HU8550
UN55HU8500 / UN55HU8550
UN60HU8500 / UN60HU8550
UN65HU8500 / UN65HU8550
UN75HU8500 / UN75HU8550
1
14.0
16.3
18.9
20.6
25.1
2
3.8
4.2
6.9
7.9
9.3
3
5.8
7.7
8.2
9.1
12.7
4
5.7
5.7
5.7
5.7
5.6
5
9.4
11.0
12.2
12.3
16.0
6
5.0
5.0
5.0
5.0
5.0
7
8.0
9.6
9.6
11.7
16.1
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to
the dimensions before installing your TV. Not responsible for typographical or printed errors.
2014 Samsung Electronics America, Inc
English - 33
Hear the abundant sound
WOOFER
MAIN SPEAKER
Woofers are located at the bottom of the TV.
Midrange ~ treble range sound radiates from the
front of the TV.
Low frequency range sound radiates from the
bottom of the TV.
You can enjoy rich and powerful bass, suitable for
any type of program source.
You can enjoy clear, precise, and rich sound with
any type of content.
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock
or news crawls at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen.
Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality.
To reduce the risk of this effect occurring, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible
match.
• Reduce brightness and contrast to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
English - 34
Mounting the TV on a Wall Using the Wall Mount Kit
(Optional)
If you mount this product on a wall, it should be mounted only as recommended by the
manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious
injury to a child or adult, and serious damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall.
For detailed information about installing the wall mount, see the instructions provided with the wall mount
kit. We recommend you contact a technician for assistance when installing the wall mount bracket. We do not
advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to
yourself or others if you select to install the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
Installing a Wall Mount Using the Wall Mount Adapter
Wall mount adapters are provided only with 75-inch TVs.
Before installing any wall mount kit, install the wall mount adapters provided with the TV.
Refer to the Installation Manual included with the Samsung wall mount kit.
VESA Wall Mount Kit Notes and Specifications
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces
other than plaster board, please contact your nearest dealer for additional information. If you install the TV on
a ceiling or slanted wall, it may fall and result in severe personal injury.
Product
Family
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
48
200 X 200
UHD-TV
50 - 75
Standard
Screw
Quantity
M8
4
400 X 400
English - 35
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury from
electric shock.
Standard dimensions for wall mount kits are shown in the table.
Samsung wall mount kits contain a detailed installation manual, and all parts necessary for assembly are
provided.
Do not use screws that do not comply with VESA standard screw specifications.
Do not use screws that are longer than the standard length or do not comply with VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws
may differ depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always have two people mount the TV on to a wall.
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls,
cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a
problem with the product caused by an increase in its internal temperature.
If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury
caused by the product falling.
Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts
provided by Samsung Electronics only.
Installation with a stand.
Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
English - 36
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.
In particular, ensure your children do not hang on or destabilize the TV.
Doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided in the Safety Flyer included with your
TV. For added stability and safety, you can purchase and install the anti-fall
device as described below.
To Prevent the TV from Falling
These are general instructions. The clamps, screws, and string are not supplied by Samsung. They must be
purchased separately. We suggest consulting an installation service or professional TV installer for specific
hardware and anti-fall hardware installation.
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been
firmly installed onto the wall.
You may need additional material such as an anchor depending on the type of wall.
2. Remove the screws from the back center of the TV, put the screws into the clamps, and then fasten the
screws onto the TV again.
These screws may not be supplied with the TV. If they are not,
purchase screws with the following specifications:
• For a 48 - 75 inch model: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a durable, heavy-duty string, and then tie the string tightly.
NOTE
• Install the TV near to the wall so that it does not fall backwards.
• Connect the string so that the clamps fixed on the wall are at the
same height to or lower than the clamps fixed on the TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional
installer.
English - 37
Warranty Information
Federal Communication Commission
Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other
channels is not possible.
This device and its antenna(s) must not be co-located
or operation in conjunction with any other antenna
or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator &
your body.
• Consult the dealer or an experienced radio/TV
technician for help.
IMPORTANT WARRANTY INFORMATION REGARDING TELEVISION FORMAT VIEWING
See the warranty card for more information on
warranty terms.
Wide screen format LED Displays (with 16:9 aspect
ratios, the ratio of the screen width to height) are
primarily designed to view wide screen format fullmotion video. The images displayed on them should
primarily be in the wide screen, 16:9 ratio format,
or expanded to fill the screen, if your model offers
this feature, with the images constantly in motion.
Displaying stationary graphics and images on the
screen, such as the dark sidebars on non-expanded
standard format television video and programming,
should be limited to no more than 5% of the total
television viewing time per week.
Additionally, viewing other stationary images and
text such as stock market crawls, video game
displays, station logos, web sites or computer
graphics and patterns, should be limited as described
above for all televisions.
Displaying stationary images that exceed the above
guidelines can cause uneven aging of LED Displays
that leave subtle, but permanent burned-in ghost
images in the LED picture. To avoid this, vary the
programming and images, and primarily display full
screen moving images, not stationary patterns or
dark bars. On LED models that offer picture sizing
features, use these controls to view different formats
as a full screen picture.
English - 38
Be careful about the television formats you select and
the length of time you view them. Uneven LED aging
as a result of format selection and use, as well as
burned in images, are not covered by your Samsung
limited warranty.
The above described warranty repairs must be
performed by a SAMSUNG Authorized Service
Center. Along with this Statement, the Original
Limited Warranty Statement and a dated Bill of
Sale as Proof of Purchase must be presented
to the Service Center. Transportation to and
from the Service Center is the responsibility of
the purchaser. Conditions covered are limited
only to manufacturing defects in material or
workmanship, and only those encountered in
normal use of the product.
• SAMSUNG ELECTRONICS NORTH AMERICAN
LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions,
exclusions and limitations of the original Limited
Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements,
conditions, exclusions and limitations contained
herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on
SAMSUNG products purchased in Canada, and in
Canada on SAMSUNG products purchased in the
United States, for the warranty period originally
specified, and to the Original Purchaser only.
Excluded, but not limited to, are any originally
specified provisions for, in-home or on-site
services, minimum or maximum repair times,
exchanges or replacements, accessories, options,
upgrades, or consumables.
For the location of a SAMSUNG Authorized
Service Center, please call toll-free:
In the United States: 1-800-SAMSUNG (1800-726-7864)
In Canada: 1-800-SAMSUNG
SAMSUNG BRAND PRODUCTS
LIMITED WARRANTY TO ORIGINAL
PURCHASER
This SAMSUNG brand product, as supplied and
distributed by SAMSUNG and delivered new, in the
original carton to the original consumer purchaser,
is warranted by SAMSUNG against manufacturing
defects in materials and workmanship for period of:
(90 Days Parts and Labor for Commercial Use)
Categories
Size
39" and
Larger
LCD/LED TV 1 Year 1 Year
37" and
Smaller
Plasma
1 Year 1 Year All
Display
3D Glasses
Parts
Labor
1 Year 1 Year -
Service
Carry-In or
In Home
Carry-In
Carry-In or
In Home
Carry-In or
Pick up
** 180 Days after Purchasing and 600 Hours of Use
Lamp on Projector
This limited warranty begins on the original date of
purchase, and is valid only on products purchased
and used in the United States. To receive warranty
service, the purchaser must contact SAMSUNG for
problem determination and service procedures.
Warranty service can only be performed by a
SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request
as proof of purchase to SAMSUNG or SAMSUNG's
authorized service center.
SAMSUNG will repair or replace this product, at our
option and at no charge as stipulated herein, with
new or reconditioned parts or products if found to be
defective during the limited warranty period specified
above. All replaced parts and products become the
property of SAMSUNG and must be returned to
SAMSUNG. Replacement parts and products assume
the remaining original warranty, or ninety (90) days,
whichever is longer.
English - 39
Certain products are eligible for In-home service at
Samsung’s discretion. To receive in-home service,
the product must be unobstructed and accessible to
service personnel. If during in-home service, repair
cannot not be completed, it may be necessary to
remove, repair and return the product. If in-home
service is unavailable, SAMSUNG may elect, at our
option, to provide for transportation of our choice
to and from a SAMSUNG authorized service center.
Otherwise, and for 37" and smaller LCD/LED TV,
transportation to and from the SAMSUNG authorized
service center is the responsibility of the purchaser.
This limited warranty covers manufacturing defects
in materials and workmanship encountered in
normal, and except to the extent otherwise expressly
provided for in this statement, noncommercial
use of this product, and shall not apply to the
following, including, but not limited to: damage
which occurs in shipment; delivery and installation;
applications and uses for which this product was
not intended; altered product or serial numbers;
cosmetic damage or exterior finishes; accidents,
abuse, neglect, fire, water, lightning or other acts of
nature; use of products, equipment, systems, utilities,
services, parts, supplies, accessories, applications,
installations, repairs, external wiring or connectors
not supplied or authorized by SAMSUNG which
damage this product or result in service problems;
incorrect electrical line voltage, fluctuations and
surges; customer adjustments and failure to follow
operating instructions, cleaning, maintenance
and environmental instructions that are covered
and prescribed in the instruction book; reception
problems and distortion related to noise, echo,
interference or other signal transmission and delivery
problems; brightness related to normal aging, or
burned-in images. SAMSUNG does not warrant
uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER
THAN THOSE LISTED AND DESCRIBED ABOVE,
AND NO WARRANTIES WHETHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY
AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY
OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT
SHALL BE BINDING ON SAMSUNG. SAMSUNG
SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR
PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH
THE CLAIM IS BASED, AND EVEN IF SAMSUNG
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. NOR SHALL RECOVERY OF ANY KIND
AGAINST SAMSUNG BE GREATER IN AMOUNT
THAN THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE ALLEGED
DAMAGE. WITHOUT LIMITING THE FOREGOING,
PURCHASER ASSUMES ALL RISK AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO PURCHASER
AND PURCHASER’S PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE THIS PRODUCT
SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF SAMSUNG. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NONTRANSFERABLE AND STATES
YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG
at:
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
1-800-SAMSUNG 726-7864 – www.samsung.com
1-800-749-0260: Projectors only
The benefits of this Limited Warranty extend only
to the original purchaser of Samsung products
from an authorized Samsung reseller. THIS LIMITED
WARRANTY SHALL NOT APPLY TO ANY SAMSUNG
PRODUCTS PURCHASED FROM UNAUTHORIZED
RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE
SUCH RESTRICTION MAY BE PROHIBITED. For a list
of Samsung authorized retailers, please go to: http://
www.samsung.com/us/peaceofmind/authorized_
resellers.html.
English - 40
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Country
CANADA
U.S.A
Customer Care
Center
1-800-SAMSUNG
(726-7864)
1-800-SAMSUNG
(726-7864)
Web Site
Address
www.samsung.com/ca/
support (English)
Samsung Electronics Canada Inc. 2050
Derry Road West, Mississauga, Ontario
L5N 0B9 Canada
www.samsung.com/ca_fr/
support (French)
www.samsung.com/us/
support
2014 Samsung Electronics Co., Ltd. All rights reserved.
Samsung Electronics America, Inc. 85
Challenger Road Ridgefield Park, NJ
07660
BN68-06001K-00
Samsung
Smart TV
Setup Guide
BN68-06002A-01
1 Unpack
Taking the TV Out of the Box
t Warning:
t Recommendation 1:
Do not touch the TV’s
screen when you take
it out of the box. Hold it
by its edges only. If you
touch the screen, you
can cause the TV panel
to crack.
t Recommendation 2:
Two people should
remove the TV from the
box as shown above.
When removing the
TV, hold it by its edges
only. Do not touch the
screen.
If only one person is
available to remove
the TV from the box,
remove it as shown in
the illustration above.
Hold the TV by its
edges. Do not touch
the screen.
Included in this Box
Remote Control
Stand Parts and Cables
MIC
TV
SEARCH
KEYPAD
VOL
RETURN
EXIT
3D
SOURCE
CH
VOICE
SMART HUB
MTS
MENU
CC
GUIDE
CH.LIST
P.SIZE
INFO
Base
Stand Mount
Also included
Screws (x8)
Wall Mount Adapter
t User manual
t Regulatory guide
t 3D Active Glasses
Power Cord
Samsung
Smart Control
Remote
Control
Batteries
(2 AA, 2 AAA)
(75 inches models: 4 pieces)
IR Extender Cable
2 Assemble
x8
1 Locate the Base, Stand Mount, and
Screws in the box and set them
aside.
✎ Remove the top portion of the
box to locate the stand parts.
2 Place the TV on a soft surface,
screen side down. Use the
Styrofoam to protect the screen.
X 4 (M4 X L14)
3 Fit the Base and Stand Mount
together, making sure the notch
on the Stand Mount aligns with the
Base.
4 Insert 4 screws, and then use a
screwdriver to secure the Base to
the Stand Mount.
5-1
5-2
5 Holding the stand parallel to the screen, slide the Stand Mount into the
notches on the back of the TV.
X 4 (M4 X L14)
6 Insert 4 screws, and then use a
screwdriver to secure the stand to
the TV.
7 Set the TV upright on its stand. Confirm that the TV is level and stable. You are
now ready to connect external devices to the TV.
3 Connect
Connection panel on
the back of the TV
* Recommended Connections
After you have connected all
your external devices, plug the
TV’s power cord into the back
of the TV. DO NOT plug it into
a wall outlet until you have
reached Section 7, Initial Setup.
Cable/Satellite/DVR
Connect your set-top box or digital
video recorder with an HDMI cable.
TV signal
Internet
Connect your
coaxial cable to the
Antenna In port.
Connect here with an Ethernet
cable or wirelessly later during
the Initial Setup.
4 Gear
* Recommended Connections
Audio
Connect a receiver/home theater
using an optical audio cable.
Blu-ray/DVD/Home Theater
Connect your video player using an
HDMI cable.
Game console
Connect your game console
or DVR using an HDMI cable.
5 STB Control
You can control your set-top-box or satellite box with the Samsung Smart Control. To
establish control, you must first set up the IR extender cable. If you don’t have an STB,
skip this section.
1 Connect the IR extender cable to the TV’s IR output connector.
IR Out
Connect the
IR Extender Cable here.
Place the transmitter
end within 4 inches
of the set-top-box’s
remote control sensor.
2 Position the transmitter end within 4 inches (10 cm) of the set-top-box’s remote
control sensor, pointing in the direction of the sensor. Make sure there are no
obstacles between the transmitter end of the IR extender cable and the settop-box or satellite box. Any obstacles will interfere with the transmission of the
remote control signals.
3 Finalize control of your set-top or satellite box when you run Initial Setup.
6 Smart Control
Introducing the Samsung Smart Control
Your TV comes with a Samsung Smart Control. Unlike conventional remote controls
that have only buttons, the Samsung Smart Control has:
t Buttons for quick access to frequently used functions.
t A motion sensor that lets you move the pointer or focus on the screen by simply
moving the Samsung Smart Control.
Inserting the Batteries
1 Gently pull on the notch in the battery cover. When the cover comes loose,
remove the cover completely.
2 Insert 2 AA alkaline batteries, making sure to align the positive and negative
polarities correctly.
3 Place the battery cover on the remote control, and then press the top part of the
cover into the control.
4 Press the catches on both sides of the battery cover in the order shown in the
figure above until the cover is completely attached to the remote control.
Using the Samsung Smart Control
When you start the TV for the first time by pressing the TV button on the Samsung
Smart Control, the TV and the Samsung Smart Control pair, using the TV’s Bluetooth
function. Once the TV and Samsung Smart Control have paired, you can use the
Samsung Smart Control to operate the TV.
Using Motion Sensor Control
Place a finger on the touch pad, and then move
the Samsung Smart Control. A pointer appears
on the screen. Move the Samsung Smart Control.
The pointer moves in the direction you moved
the Samsung Smart Control. If you stop using the
Motion Function, even momentarily, put your finger
on the touch pad, and then move the Samsung
Smart Control again to re-start the function.
Moving the Focus, Pointer,
or Cursor Using the
Directional Buttons
Selecting an Item/Entering a
Menu by Pressing the Touch
Pad
Press the directional buttons (up, down,
left, and right) to move the focus,
pointer, or cursor in the direction you
want.
To enter a menu or select an item,
highlight the item or the menu title, or
move the pointer over it, and then press
the touch pad.
Pairing the Samsung Smart Control Again
If you need to re-establish the connection between the TV and the Samsung Smart
Control, point the Samsung Smart Control at the remote control sensor of the TV, and
then press the RETURN button and GUIDE button simultaneously for 3 seconds or
more.
7 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup.
During Initial Setup, your TV pairs with the Samsung Smart Control, connects to your
home network, implements Smart Hub agreements, links to the source of your live TV
signal, and sets up control of your set-top or satellite box.
Information You Need
Internet Access
Have the following information on hand
before you turn on your TV for the first
time:
t Your wireless network’s password.
(Make sure your network is on.)
t Your Postal or Zip code.
t The name and location of your cable
or satellite provider (if you use one).
The TV must be connected to the Internet
to use the Smart Features. If you have
a wireless network, confirm that your
network router is working before you
start the initial setup. If you have a wired
network, connect the TV to the network
with an Ethernet cable before you begin
(CAT 7 cable preferred).
Running Initial Setup
1 Plug your TV into a wall outlet.
2 Aim the Samsung Smart Control at
the TV.
3 Press the TV button on the Samsung
Smart Control to turn on the TV, and
then follow the directions on the
screen.
Once your Samsung Smart Control pairs, you can use the Samsung Smart Control’s
motion sensor function to move the pointer on the screen. To use the motion sensor
function, rest a finger on the touch pad, and then move the Samsung Smart Control.
To select items, press the touch pad.
To learn more about operating your TV and its Smart Features, see your TV’s user‘s
manual or launch the TV’s built in e-Manual. Congratulations on the purchase of your
new Smart TV!
Common issues
Can’t Connect to Network or
Apps (For Internet supported
models only)
t Make sure the TV has a network
connection (MENU > Network >
Network status).
t Contact your Internet service provider.
No Picture/Sound or Distorted
Picture/Sound from an External
Device
t Make sure your connection to the
device is correct.
t Perform a TV Self Diagnosis to identify
the problem (MENU > Support > Self
Diagnosis > Sound or Picture Test).
t Change the picture size. (Use the
“P.Size” button on your remote.)
Poor Picture Quality
t Select High Definition (HD) channels
or programs.
Your Settings are Lost after 30
Minutes
t Change to Home Mode (MENU >
Support > Use Mode > Home Use).
“Weak or No Signal” Displayed in
TV Mode/Cannot Find Channel
t Press the SOURCE button on your
remote.
t If the TV is not connected to a cable
or satellite box, run Auto Program
to search for channels (MENU >
Broadcasting > Auto Program).
Can’t See All Apps or Apps Not
Working
t Reset Smart Hub (MENU > Smart
Hub > Smart Hub Reset).
The stand is wobbly or crooked
t Make sure the indicator arrows on the
stand and stand holder are properly
aligned.
The TV won’t turn on
t Make sure all cables are fully inserted
and that the remote has batteries
installed.
My remote, gestures, and/or
voice does not work
t The TV ships with protective stickers
covering some of the sensors. Make
sure all of the stickrs have been
removed.
More help
REQUIRE ASSISTANCE
WITH YOUR PRODUCT?
Tech Support and Chat
t www.samsung.com/support
Purchase any Samsung TV and you’ll
enjoy the convenience of Samsung
Service. If you require any assistance with
your TV, first try any of Samsung’s helpful
support options listed here.
Remote Support
t Samsung Remote Support service
Troubleshooting
t For more quick solutions to common
issues, see Troubleshooting and
Maintenance in the user’s manual.
Built-in user manual
t On the Samsung Smart Control,
press the KEYPAD button, and then
select e-Manual on the On-Screen
Remote. You can also select Support
> e-Manual in the TV’s menu.
Scan the QR code to view our
helpful How-to Videos
offers you one-on-one support with
a Samsung Technician who can
remotely diagnose your TV.
For Remote Support:
1 Call the Samsung Contact Center
at 1-800-SAMSUNG and ask for
remote support.
2 Open the menu on your TV and go to
the Support section.
3 Select Remote Management, and
then read and agree to the service
agreements. When the PIN screen
appears, provide the PIN number to
the agent.
4 The agent accesses your TV.
Scan this with your
smart phone to see
helpful videos.
If you experience issues, please do not take the TV back to the store.
In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or
visit us at www.samsung.com or www.samsung.com/spsn for support and warranty
service.
Multiroom Link
User Manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
o Supported devices : The function is available for all 2014 models that support Multiroom Link.
o Sound quality may be affected by the condition of the wireless network.
o The network connection can be negatively affected and even lost if the network environment
deteriorates over time.
A Connecting to Your Network
1
All the devices need to connect to the same router.
2
The Multiroom App can only be used with Wireless Audio Multirooms or a SoundBar which has the Multiroom
Link function.
❚ Connecting to a network if you do not have a HUB.
Internet
TV
Home Entertainment
System
Soundbar
Wireless Router
Wireless Audio Multiroom
Blu-ray Disc Player
Link Mate
Smart Devices
(Android or iOS)
o If you have a HUB, you can connect more easily.
If you want to connect to a HUB, refer to the manual for each device.
4
2
❚ Connecting to a network if you have a HUB.
Internet
TV
Soundbar
Home Entertainment
System
Wireless Router
Hub
Blu-ray Disc Player
Wireless Audio Multiroom
Link Mate
Smart Devices
(Android or iOS)
o If you have a HUB, you can connect more easily.
If you want to connect to a HUB, refer to the manual for each device.
o HUBs may not be available in all countries and regions.
If you want to purchase a HUB, please contact or visit the dealer you purchased your Wireless
Audio Multiroom from or contact the Samsung Customer Care Center.
4
3
A Grouping
❚ Grouping Devices So You Can Listen to the Same Audio from Each Device
o With grouping, you can listen to the same music or audio from several devices.
Home Entertainment
System
Same Sound
Soundbar
Wireless Audio
- Multiroom
`
Setting Up Grouping with the Multiroom App
Group
Multiroom Audio 1
Multiroom Audio 1
MultiroomAudio
Audio11++ [Samsung]
[Samsung]
Multiroom
To create a new group.
choose some
Choose
some speakers.
speakers.
No Music
No Music
Select
All
No Music
Multiroom Audio 1
Multiroom Audio 1
NO MUSIC
Source
Surround
Group
Source
Surround
Group
[Samsung] Soundbar 1
Soundbar 1
[Samsung] Soundbar 2
[Samsung] Soundbar 1
[Samsung] Soundbar 1
[Samsung] Soundbar 1
Cancel
No Music
No Music
Done
Soundbar 2
Source
Source
Surround
Group
Source
S
Surround
S
d
Edit
Ungroup
Group
G p
A Multiroom Mode vs Surround Mode
Multiroom Mode
Specified Use
Restrictions
Surround Mode
Place a number of Multiroom speakers
You can listen to the same audio from
in the same space and listen to surround
several speakers in each separate space.
sound.
The audio from each device may lag
Cannot be used with multiple units in
behind the video and audio of the device
different rooms or spaces.
which is playing the source content.
4
4
Remark
A Listening to Audio or Music in Multiroom Mode
❚ Listening to TV Audio from Devices in Multiple Rooms
o You can listen to the sound from your TV through a Home Theater, SoundBar, or Wireless Audio Multiroom.
o The sound from each device may lag behind the video and audio on the TV.
o You can set up Multiroom TV audio using the Multiroom App or the menu on your TV. See the instructions below.
Home Entertainment System
Soundbar
Wireless Router
TV
Wireless Audio Multiroom
`
Setting Up Multiroom TV Audio Using the Multiroom App
Source
[Samsung] M* 1
[Samsung] M* 1
Multiroom
Audio 1
Wi-Fi
Select the function that is suitable
for how you will use the speaker.
No Music
No Music
No Music
[HTS]Model Name 1
[TV] Samsung Model Name 1
Source
Surround
Group
Source
Surround
Group
Source
Surround
TV soundbar
Group
Bluetooth
[Samsung] Soundbar 1
[Samsung] Soundbar 2
[Samsung] Soundbar 1
AUX
No Music
No Music
No Music
Cancel
Source
`
Surround
Group
Source
Surround
S
ce
Source
Group
OK
S
d
Surround
Setting Up Multiroom TV Audio Using Your TV's Menu
o Settings Sound Speaker Settings Multiroom Link Multiroom
Settings
Multiroom Link
[HTS]Model [HTS]Model [Samsung]
Name 1
Name 2
Soundbar 1
Settings
Multiroom Link
Multiroom
[Samsung]
Soundbar 2
[Samsung]
M* 1
[HTS]Model [HTS]Model
Name 1
Name 2
Multiroom
[Samsung]
M* 1
Use
Don't Use
[Samsung]
M* 2
[Samsung]
M* 3
Settings
Multiroom Link
[Samsung]
M* 2
[Samsung]
M* 3
Speaker Settings
Multiroom
TV Sound Output
Multiroom Link
k
Surround
e
XX XXXXXXXXXXX
~ XX XXXXXXXXXXX
XX XXXXXXXXXXX
[HTS]Model [HTS]Model [Samsung]
Name 1
Name 2
Soundbar 1
[Samsung]
Soundbar 2
~ XX XXXXXXXXXXX
~ XX XXXXXXXXXXX
[Samsung]
M* 1
Multiroom Link
~ Settings
[Samsung]
M* 2
[Samsung]
M* 3
OK
4
5
G p
Group
❚ Listening to Home Theater Audio from Devices in Multiple Rooms
o You can listen to audio from your Home Theater through another Home Theater, a SoundBar, or a Wireless Audio
Multiroom.
o You can set up Multiroom Home Theater audio using the Multiroom App or the menu on your Home Theater. See
the instructions below.
Home Entertainment System
Soundbar
Wireless Router
Home Entertainment
System
`
Wireless Audio Multiroom
Setting Up Multiroom Home Theater Audio Using the Multiroom App
Source
[Samsung] M* 1
[Samsung] M* 1
Multiroom
Audio 1
Wi-Fi
Select the function that is suitable
for how you will use the speaker.
No Music
No Music
No Music
[HTS]Model Name 1
[HTS]Model Name 2
Source
Surround
Group
Source
Surround
Group
Source
Surround
TV soundbar
Group
Bluetooth
[Samsung] Soundbar 1
[Samsung] Soundbar 2
[Samsung] Soundbar 1
AUX
No Music
No Music
No Music
Cancel
Source
`
Surround
Group
Source
Surround
S
Source
Group
OK
S
d
Surround
Setting Up Multiroom Home Theater Audio Using Your Home Theater's Menu
o Settings Sound Speaker Settings Multiroom Link
Multiroom Link
Multiroom Link
Multiroom
Select a speaker to use.
[Samsung] Soundbar 1
Don't Use
[Samsung] Soundbar 2
Don't Use
[Samsung] [Samsung]
Soundbar 1 Soundbar 2
Edit Name
Close
Multiroom Link
Multiroom Link
Select a speaker to use.
[Samsung] Soundbar 1
Use
[HTS]Model Name 2
Don't Use
Edit Name
[Samsung] [Samsung]
Soundbar 1 Soundbar 2
Close
4
6
Multiroom
G p
Group
❚ Listening to Blu-ray Player Audio from Devices in Multiple Rooms
o You can listen to audio from your Blue-ray through a Home Theater, SoundBar, or Wireless Audio Multiroom.
o You can set up Multiroom Blu-ray audio using the Multiroom App or the menu on your Blu-ray player. See the
instructions below.
Home Entertainment System
Soundbar
Wireless Router
Blu-ray Disc Player
Wireless Audio Multiroom
`
Setting Up Multiroom Blu-ray Audio Using the Multiroom App
Source
[Samsung] M* 1
[Samsung] M* 1
Multiroom
Audio 1
Wi-Fi
Select the function that is suitable
for how you will use the speaker.
No Music
No Music
No Music
[BD]Model Name 1
[BD]Model Name 2
Source
Surround
Group
Source
Surround
Group
Source
Surround
TV soundbar
Group
Bluetooth
[Samsung] Soundbar 1
[Samsung] Soundbar 2
[Samsung] Soundbar 1
AUX
No Music
No Music
No Music
Cancel
Source
`
Surround
Group
Source
Surround
Group
Source
S
OK
Surround
S
d
Group
G p
Setting Up Multiroom Blu-ray Audio Using Your Blu-ray Player's Menu
o Settings Sound Speaker Settings Multiroom Link
Multiroom Link
[Samsung] [Samsung]
Soundbar 1 Soundbar 2
Multiroom
Multiroom Link
[Samsung]
Soundbar 1
Multiroom
Use
Multiroom Link
[Samsung] [Samsung]
Soundbar 1 Soundbar 2
Don't Use
4
7
Multiroom
A Listening to Audio or Music in Surround Sound Mode
o The Surround Sound mode will be updated soon.
o If the audio source is in 2-channel format, sound will be produced only through the speakers that correspond to
Front Left and Front Right.
o If the network connection is not stable, Surround Sound Mode may be cancelled automatically.
o When setting Surround Sound Mode, setting speakers of equal output power as both Front Left and Front Right
is recommended.
❚ Listening to Surround Sound Using Several Audio Devices
o You can set up Surround Sound mode using the Multiroom App or the menu on your TV. See the instructions
below.
`
Setting Up TV Surround Sound Using the Multiroom App
Source
[Samsung] M* 1
[TV]Samsung LED55
No Music
Source
[Samsung] M* 1
Wi-Fi
Multiroom
Audio 1
[TV] Samsung Model Name 1
Noyour
Music
Connect
speakers and
[TV]Samsung LED55 via Wi-Fi to
enjoy surround sound.
Surround
Group
Source
TV soundConnect
Surround
Source
Surround
Group
Group
Bluetooth
[Samsung] M*2
[Samsung] M*2
[Samsung]
Soundbar 1
AUX
No Music
No Music
Cancel
Source
Surround
Group
Source
Surround
Group
Stereo & Surround : Setup
Stereo & Surround : Setup
Stereo & Surround : Setup
1. Select the number of channels you
would like to set up.
1. Select the number of channels you
would like to set up.
1. Select the number of channels you
would like to set up.
Multiroom
Audio 1
2CH
Multiroom
Audio 1
2CH
[Samsung] M* 1
Front L
[Samsung] M* 1
Front L
Front R
Multiroom Audio 1
2CH
[Samsung] M* 1
Front L
Front R
[Samsung] M* 2
Front R
Multiroom Audio 1
[Samsung] Soundbar 1
`
OK
[Samsung] Soundbar 1
2. Drag speakers to the positions that
best match your desired layout.
2. Drag speakers to the positions that
best match your desired layout.
2. Drag speakers to the positions that
best match your desired layout.
[Samsung] M* 2 [Samsung] M* 3 [Samsung] M* 4
[Samsung] M* 2 [Samsung] M* 3 [Samsung] M* 4
[Samsung] M* 3 [Samsung] M* 4 [Samsung] M* 5
Source
Cancel
Source
Cancel
Surround
Group
Next
Surround
Group
Next
Cancel
Next
Setting Up TV Surround Sound Using Your TV's Menu
o Settings Sound Speaker Settings Multiroom Link Surround
Settings
Multiroom Link
Settings
Multiroom Link
Surround
Surround
2CH
2CH
Front Left
Front Right
Front Left
Front Right
[Samsung] M* 1
[Samsung] M* 2
[Samsung] Soundbar 1
[Samsung] Soundbar 2
Settings
Multiroom Link
Speaker Settings
Surround
TV Sound Output
Network Speaker
k
Surround
e
2CH
XX XXXXXXXXXXX
~ XX XXXXXXXXXXX
Front Left
Front Right
XX XXXXXXXXXXX
~ XX XXXXXXXXXXX
~ XX XXXXXXXXXXX
[Samsung] M* 1
Multiroom Link
~ Settings
OK
4
8
❚ Listening to Surround Sound Using a SoundBar and Multiroom Audio Devices
o You can set up Surround+SoundBar mode using the Multiroom App or the menu on your TV. See the instructions below.
o If the audio source transferred to the SoundBar is encoded in DTS format, sound will be produced
only through the speakers that correspond to Front Left and Front Right.
`
Setting Up Surround+SoundBar Mode Using the Multiroom App
Source
[Samsung] Soundbar 1
[TV]Samsung Model Name 1
No Music
Source
[Samsung] Soundbar 1
Wi-Fi
Multiroom
Audio 1
[TV] Samsung Model Name 1
Noyour
Music
Connect
speakers and
[TV]Samsung LED55 via Wi-Fi to
enjoy surround sound.
Surround
Group
Source
TV soundConnect
Surround
Source
Surround
Group
Group
Bluetooth
[Samsung] Soundbar 2
[Samsung] Soundbar 2
[Samsung]
Soundbar 1
AUX
No Music
No Music
Cancel
Source
Surround
OK
Group
Source
Stereo & Surround : Setup
Front L+R
Front L+R
[Samsung] Soundbar
`
Surround L
[Samsung] M* 1
Surround R
Surround R
Move the speaker by dragging it to the
desired location.
Move the speaker by dragging it to the
desired location.
[Samsung] M* 1 [Samsung] M* 2 [Samsung] M* 3 [Samsung]...
[Samsung] M* 2 [Samsung] M* 3 [Samsung] M* 4
Cancel
Group
Stereo & Surround : Setup
[Samsung] Soundbar
Surround L
Surround
Next
Cancel
Next
Setting Up TV Surround +SoundBar Mode Using Your TV's Menu.
o Settings Speaker Settings Multiroom Link Soundbar+Surround
Speaker Settings
Settings
TV Sound Output
Multiroom Link
Network Speaker
k
Surround
e
Soundbar+Surround
XXXXXXXX
~ XXXXXXXX
XXXXXXXX
Surround Left
~ XXXXXXXX
~ XXXXXXXX
Surround Right
Multiroom Link
~ Settings
OK
Volume Level
OK
Speaker Test
4
9