Emerson CF712ORB02 Owner`s manual

READ AND SAVE THESE INSTRUCTIONS
PRO SERIES™
50” Ceiling Fan Owner's Manual
CF712AB02
Antique Brass
Model Numbers
CF712ORB02
Oil Rubbed Bronze
with Amber Scavo Glass
CF712AW02
CF712WORB02
Summer White
CF712BS02
Oil Rubbed Bronze with Opal
Matte Glass
Brushed Steel
CF712WW02
Appliance White
Net Weight:
19.0
Lbs.
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday
Part No. F40BP73000007
Revision: 150226
1-800-654-3545
• Español - página 29
• Français - page 57
www.emersonfans.com
Form No. BP7300-7
U.L. Model No.: 52-ANT
Table of Contents
Section
Page
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1. Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . .3-4
2. Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .4
3. Removal of the Hanger Bracket . . . . . . . . . . . . . . . . . . . .5
4. Installing the Hanger Ball/Downrod Assembly (Standard) 6-7
5. Installing the Ceiling Cover on the Fan Motor Housing
. . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
(Close-to-Ceiling)
6. How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . .10-11
7. Hanging the Ceiling Fan (Standard) . . . . . . . . . . . . . . . .11
8. Hanging the Ceiling Fan (Close-to-Ceiling) . . . . . . . . . . . .12
9. How to Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . .13-14
10. Installing the Ceiling Cover . . . . . . . . . . . . . . . . . . . . . .15
Section
Page
11. Installing the Fan Blades . . . . . . . . . . . . . . . . . . . . . . . .16
12. Installing the Light Fitter . . . . . . . . . . . . . . . . . . . . . .17-20
13. Using Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . . .21
14. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
15. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
16. Instruction to the User . . . . . . . . . . . . . . . . . . . . . . . . . .22
17. Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
18. Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Ceiling Fan Limited Warranty . . . . . . . . . . . . . . . . . . . . . . .27
Spanish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
French . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
!
WARNING
3. The outlet box and joist must be securely mounted
and capable of reliably supporting at least 50 pounds.
Use only U.L. outlet boxes listed as “Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less”, and use the
mounting screws provided with the outlet box.
Most outlet boxes commonly used for support of light
fixtures are not acceptable for fan support and may
need to be replaced. Consult a qualified electrician if
in doubt.
4. The downrod furnished with the fan provides the
minimum recommended floor to fan blade clearance
for an 8 foot ceiling.
5. The fan must be mounted with the fan blades at least
7 feet from the floor to prevent accidental contact with
the fan blades.
6. Follow the recommended instructions for the proper
method of wiring your ceiling fan. If you do not know
enough about electrical wiring, have your fan installed
by a licensed electrician.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK,
OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
a. Use this unit only in a manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
b. Before servicing or cleaning unit, switch power off
at service panel and lock service panel
disconnecting means to prevent power from being
switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a warning device, such as a tag, to the
service panel.
1. Read your owner’s manual carefully and keep it for
future reference.
2. Be careful of the fan and blades when cleaning,
painting, or working near the fan. Always turn off the
power to the ceiling fan before servicing.
3. Do not put anything into the fan blades while they are
turning.
4. Do not operate reversing switch until fan blades have
come to a complete stop.
WARNING: To reduce the risk of electrical shock, this
fan must be installed with an isolating wall
control/switch.
WARNING: To avoid fire, shock or injury, do not use an
Emerson or any other brand of control not specifically
approved for this fan.
WARNING: This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use this product by Emerson
Electric Co. Substitution of parts or accessories not
designated for use with this product by Emerson could
result in personal injury or property damage.
Additional Safety Instructions for Installation
1. To avoid possible shock, be sure electricity is turned
off at the fuse box before wiring, and do not operate
fan without blades.
WARNING: To reduce the risk of personal injury, do not
bend the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
2. All wiring must be in accordance with the National
Electrical Code “ANSI/NFPA 70-2014” and Local
Electrical Codes. Use the National Electrical Code if
Local Codes do not exist. The ceiling fan must be
grounded as a precaution against possible electrical
shock. Electrical installation should be made or
approved by a licensed electrician.
NOTE: All setscrews must be checked and re-tightened
where necessary before installation.
DATE CODE:
The date code of this fan may be found on the box, stamped in ink on a white label. You should
record this data above and keep it in a safe place for future use.
2
U.L. Model No.: 52-ANT
1. Unpacking Instructions
WARNING
!
PACKAGE CONTENTS
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
Part
A
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
1.1
Description
Fan Motor Assembly
B
Ceiling Cover with Hanger Bracket
1
C
Glass Bowl
1
D
Light Fitter
1
E
Hanger Ball / 4.5” Downrod Assembly
1
F
60-Watt (max.) Candelabra Base Bulbs
3
G
Blade Flanges
5
H
Fan Blades
5
Open carton containing fan. Remove top half of
styrofoam unit. Remove parts and check to see that you
have received the following parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
NOTE: Place the parts from the loose parts bags in
a small container to keep them from being lost.
If any parts are missing, call 1-800-654-3545
for replacement parts before proceeding.
A
D
E
HARDWARE CONTENTS
Part
1
2
3
4
5
6
7
8
9
B
Description
M5 x 16mm Washer Head Blade Screws
Phillips Round Head Flange Screw
with Lockwasher
Wire Connectors, 12 ga.
Rubber Gasket
Wood Pendants
Couplings
Clevis Pin
Hairpin Clip
Blade Balance Kit
1
5
Quantity
1
2
F
1
3
1
2
2
1
1
1
C
G
H
1.2
4
3
7
6
Quantity
16
Remove the fan housing assembly from the protective
plastic bag. Turn the upper styrofoam pad over and
carefully place the fan motor assembly into the recess
in the pad with the top of the motor facing up.
8
9
3
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
1. Unpacking Instructions
(Continued)
This Manual Is Designed to Make it as Easy as Possible for You to Assemble,
Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
!
Materials
Controls Sold Separately
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would be
a 3-conductor (2-wire with ground) of following size:
Installed Wire Length
Up to 50 ft.
50-100 ft.
WARNING
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 13). If you feel
you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
One Phillips head screwdriver
One stepladder
One 1/4” blade screwdriver
One wire stripper
Three wire connectors (supplied).
SW46 Wall Control and SW90 Wall Control (both sold
separately) may be used with this 50” PRO Series
Ceiling Fan. Controls are recommended for indoor use
only.
Wire Size A.W.G.
14
12
2. Electrical Requirements
Your new ceiling fan will require a grounded electrical
supply line of 120 volts AC, 60 Hz, 15 amp circuit.
!
The outlet box must be securely anchored and capable
of withstanding a load of at least 50 pounds.
WARNING
If your fan is to replace an existing ceiling light fixture,
turn electricity off at the main fuse box at this time and
remove the existing light fixture.
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less”, and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
!
!
WARNING
To avoid fire or shock, follow all wiring instructions
carefully.
Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
WARNING
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
Please call Emerson technical support at
1-800-654-3545 if you have any questions about
installation and operation of this ceiling fan.
4
U.L. Model No.: 52-ANT
IMPORTANT
Your ceiling fan is designed to be installed either in the standard manner, or in the
close-to-the-ceiling manner. Using the standard method, the hanger ball/downrod assembly will suspend
the fan several inches below the ceiling cover. Using the close-to-the-ceiling method, the ceiling cover
installs directly on the fan motor housing, thus mounting the fan 3-1/2 inches closer to the ceiling than the
standard method. In no case should the fan blades be lower than seven feet above the floor. Depending
on your desired mounting method, proceed to “INSTALLING HANGER BALL/DOWNROD ASSEMBLY” for
standard mounting, or to “INSTALLING CEILING COVER ON FAN MOTOR HOUSING” for close-to-theceiling mounting.
3.1
3. Removal of the Hanger Bracket
ROTATE CEILING COVER
COUNTER-CLOCKWISE
TO REMOVE THE
HANGER BRACKET
Loosen the two screws in the keyholes slots of the
ceiling cover.
Remove and retain the other two screws and
lockwashers (Figure 1).
HANGER
BRACKET
CEILING
COVER
Turn the ceiling cover and remove the hanger bracket.
REMOVE AND RETAIN
TWO SCREWS AND
LOCKWASHERS
LOOSEN THE TWO
SCREWS IN THE
KEYHOLE SLOTS
Figure 1
5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
4.1
4. Installing the Hanger Ball/Downrod Assembly
(For Standard Mounting)
THREE 42"
MOTOR LEADS
Pass the 42" motor leads through the opening in the
ceiling cover.
Be sure the cover is oriented correctly (Figure 2).
CEILING
COVER
Figure 2
4.2
THREE 42"
MOTOR LEADS
Separate, untwist and unkink the three motor leads.
Route the motor leads through the hanger ball/downrod
assembly (Figure 3).
HANGER
BALL/4.5"
DOWNROD
ASSEMBLY
Figure 3
6
U.L. Model No.: 52-ANT
4.3
4. Installing the Hanger Ball/Downrod Assembly
(For Standard Mounting) (Continued)
HAIRPIN
CLIP
CLEVIS
PIN
DOWNROD
Loosen the two setscrews in the motor coupling.
Place the hanger ball/downrod assembly into the motor
coupling, aligning the clevis pin holes in the downrod
with the holes in the motor coupling (Figure 4).
CLEVIS
PIN
The clevis pin must go through the holes in the motor
coupling and the holes in the downrod.
HAIRPIN
CLIP
LOOSEN
SETSCREWS (2)
Be sure to push the straight leg of the hairpin clip
through the hole near the end of the clevis pin until the
curved portion of the hairpin clip snaps around the
clevis pin.
The hairpin clip must be properly installed to prevent
the clevis pin from working loose.
MOTOR
COUPLING
Pull on the hanger ball to make sure the clevis pin is
properly installed.
!
WARNING
It is critical that the clevis pin in the motor coupling is
properly installed. Failure to verify that the pin is
properly installed could result in the fan falling.
Figure 4
4.4
While pulling up on the hanger ball, retighten the two
setscrews (previously loosened) in the motor coupling
to secure the hanger ball/downrod assembly into place
(Figure 5).
NOTE: The setscrews must be properly installed as
described above, or fan wobble could result.
!
WARNING
It is critical that the setscrews are securely tightened.
Failure to verify that the setscrews are properly
installed could result in the fan falling.
MOTOR
COUPLING
RETIGHTEN
SETSCREW
NOTE: For hanging instructions using
Hanger Ball/Downrod Assembly, See Page 11,
Section 6. Hanging the Ceiling Fan (Standard
Method Using Hanger Ball/Downrod).
HANGER BALL/
DOWNROD
ASSEMBLY
RETIGHTEN
SETSCREW
Figure 5
7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
5.1
5. Installing the Ceiling Cover on the Fan Motor
Housing (For Close-to-the-Ceiling Mounting)
Remove three motor housing screws (every other
screw as illustrated) from the top of the motor housing
(Figure 6).
Retain the three motor housing screws for future use.
REMOVE SCREWS (3)
MOTOR
HOUSING
SCREWS (3)
MOTOR
HOUSING
Figure 6
5.2
Position the rubber gasket (supplied in parts bag) on
the motor housing.
The three small holes in the gasket should center over
the holes in the motor housing where the three screws
were previously removed (Figure 7).
The three large holes in the gasket should center over
the three screws still installed in the motor housing.
INSTALL
RUBBER
GASKET
RUBBER GASKET
SMALL HOLES (3)
RUBBER GASKET
LARGE HOLES (3)
RUBBER
GASKET
MOTOR
HOUSING
Figure 7
8
U.L. Model No.: 52-ANT
5.3
5. Installing the Ceiling Cover on the Fan Motor
Housing (For Close-to-the-Ceiling Mounting) (Continued)
Gently pry the decorative cap from the ceiling cover
(Figure 8).
DECORATIVE CAP
CEILING COVER
Figure 8
5.4
SCREWS (3)
(Previously Removed)
Align the holes in the ceiling cover with the holes in the
motor housing and secure using the three screws
previously removed in Step 5.1 (Figure 9).
CEILING COVER
NOTE: For hanging instructions using the Close-tothe-Ceiling Method, See Page 12, Section 8.
Hanging the Ceiling Fan (Close-to-the-Ceiling
Method with Ceiling Cover Installed on the Motor
Housing).
RUBBER GASKET
Figure 9
5.5
The fan comes with blue, black and white leads that are
42” long.
6 TO 9
INCHES
Measure up approximately 6 to 9-inches above the
motor coupling (Figure 10).
MOTOR
COUPLING
Cut off excess leads and strip back insulation 1/2-inch
from ends of leads.
Figure 10
9
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
6. How to Hang Your Ceiling Fan
!
WARNING
!
WARNING
CEILING
The fan must be hung with at least 7' of clearance from
floor to blades (Figure 9).
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as “Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less”.
!
7'
MIN.
WARNING
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less”, and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
FLOOR
Figure 9
6.1
OUTLET BOX
Unscrew (but do not remove) the two mounting screws
in the outlet box (Figure 10).
Position the hanger bracket on the outlet box so that
the T-slots in the hanger bracket are aligned with the
outlet box screws.
!
LOOSEN TWO
SCREWS
(SUPPLIED
WITH OUTLET BOX)
WARNING
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
SLIDE THE HANGER BRACKET
ONTO THE OUTLET BOX
SCREWS, THROUGH THE
T-SLOT
HANGER BRACKET
Figure 10
10
T-SLOT
U.L. Model No.: 52-ANT
6.2
6. How to Hang Your Ceiling Fan
(Continued)
NOTE: The hanger bracket must be mounted flush
with the ceiling in order for the ceiling cover to
install properly. If necessary, use leveling washers
(not supplied) between the outlet box and the
hanger bracket.
Slide the hanger bracket onto the outlet box screws.
Center the bracket over the outlet box and then
securely tighten the screws (Figure 11).
!
WARNING
SECURELY
TIGHTEN
OUTLET BOX
SCREWS (2)
Hanger bracket must seat firmly against outlet box. If
the outlet box is recessed, use leveling washers
between the hanger bracket and the outlet box until
the bracket is flush with the ceiling. If bracket and/or
outlet box are not securely attached, the fan could
wobble or fall.
7.1
HANGER
BRACKET
HOOK
Figure 11
7. Hanging the Ceiling Fan
(Standard Method Using Hanger Ball/Downrod)
Carefully lift the fan assembly and seat the hanger ball
in the hanger bracket (Figure 12).
The tab on the hanger bracket must seat in the groove
in the hanger ball.
!
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
!
HANGER
BRACKET
WARNING
HOOK
To avoid fire or shock, do not pinch wires between the
hanger ball/downrod assembly and hanger bracket.
TAB
HANGER BALL
GROOVE
NOTE: CEILING COVER,
SUPPLY WIRES AND FAN
WIRES OMITTED FOR
CLARITY.
Figure 12
11
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
8. Hanging the Ceiling Fan
(Close-to-the-Ceiling Method with
Ceiling Cover Installed on the Motor Housing)
8.1
Carefully lift the fan assembly up to the hanger bracket.
Pass the hook on the hanger bracket (Figure 13)
through one of the screw holes (not the slots) in the
ceiling cover (Figure 13).
The hook must pass from the inside of the ceiling cover
to the outside. The hook will hold the fan assembly
while connecting the wiring.
!
HANGER
BRACKET
WARNING
HOOK
The hook must pass through the screw hole in the
ceiling cover from the inside to the outside. Any other
hanging method may cause the hook to break and the
fan to fall.
HOOK ON HANGER BRACKET MUST PASS THROUGH SCREW HOLE
IN CEILING COVER, INSIDE OF BRACKET TO OUTSIDE OF BRACKET
CEILING
COVER
Figure 13
12
U.L. Model No.: 52-ANT
9. How to Wire Your Ceiling Fan
The following instructions show that the Hanger Ball/Downrod Assembly and the Close-To-The-Ceiling
Assembly wiring instructions are the same.
9.1
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
!
Hanger Ball/Downrod Assembly Shown
GROUND
CONDUCTOR
SUPPLY
LISTED WIRE
CONNECTOR
WARNING
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
Connect the green grounding lead from the hanger ball
and the green grounding lead from the hanger bracket
to the grounding conductor of supply (this may be a
bare wire or wire with green colored insulation)
(Figure 14). Securely connect wires using wire
connectors supplied.
GREEN WIRE
(GROUND)
FROM
HANGER
BRACKET
GREEN WIRE
(GROUND) FROM
HANGER BALL
Figure 14
NOTE: When wiring the ceiling fan for close-to-theceiling mounting, there will be no green grounding
lead from the hanger ball.
!
WARNING
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
9.2
Hanger Ball/Downrod Assembly Shown
Securely connect the fan motor white wire to the supply
white (neutral) wire using wire connector supplied
(Figure 15).
FAN MOTOR
WHITE WIRE
SUPPLY WHITE
(NEUTRAL)
LISTED WIRE
CONNECTOR
Figure 15
13
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
9.3
9. How to Wire Your Ceiling Fan
(Continued)
Hanger Ball/Downrod Assembly Shown
Securely connect the fan motor black wire and blue
wire to the supply black (hot) wire using wire connector
supplied (Figure 16).
LISTED WIRE
CONNECTOR
SUPPLY
BLACK
(HOT) BLUE
FAN
WIRE
FAN MOTOR
BLACK FAN
WIRE
Figure 16
9.4
Hanger Ball/Downrod Assembly Shown
After connections have been made, turn leads upward
and carefully push leads into the outlet box, with the
white and green leads on one side of the outlet box and
black leads on the other side of the outlet box
(Figure 17).
!
WHITE WIRES
WARNING
TWO BLACK WIRES
AND ONE BLUE WIRE
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until blades are in place. Noise and fan damage
could result.
GREEN WIRES
Figure 17
14
U.L. Model No.: 52-ANT
10. Installing the Ceiling Cover
10.1
Hanger Ball/Downrod Assembly Shown
Remove the left screw and lockwasher from each side
of the hanger bracket (Figure 18) and loosen the other
two screws.
NOTE: When installing the ceiling fan using the
close-to-the-ceiling method, carefully lift the fan
assembly from the hook on the hanger bracket and
proceed as follows.
REMOVE LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
LOOSEN THE RIGHT
SCREW/LOCKWASHER
ON EACH SIDE
Figure 18
10.2
HANGER BALL/DOWNROD ASSEMBLY
Lift the ceiling cover up to the hanger bracket. Engage
the slots in the ceiling cover with the loosened screws
in the bracket and turn the cover counterclockwise
(Figure 19).
Be sure that the lockwashers are between the screw
heads and the ceiling cover.
REINSALL LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
Install the other two screws and lockwashers; tighten all
screws securely.
!
WARNING
CEILING COVER
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.
HANGER BRACKET
CLOSE-TO-THE-CEILING ASSEMBLY
REINSALL LEFT
SCREW AND
LOCKWASHER
ON EACH SIDE
HANGER
BRACKET
CEILING COVER
Figure 19
15
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
11.1
11. Installing the Fan Blades
!
WARNING
M5 x 6 WASHER
HEAD BLADE SCREW (3)
To reduce the risk of personal injury, do not bend the
blade flanges when installing the flanges, balancing
the blades, or cleaning the fan. Do not insert foreign
objects between rotating fan blades.
FAN BLADE
ALIGNMENT
POST
Make sure the three rubber grommets are firmly seated
on each of the blade flanges. Then mount the blade
flanges to the fan blades using three M5 x 6 washer
head blade screws per blade (Figure 19).
BLADE FLANGE
RUBBER GROMMETS
Figure 19
11.2
MOTOR HUB
Mount one blade assembly to the motor hub by mating
the alignment post (Figure 20) of the flange with one of
the alignment slots in the motor hub (Figure 20).
Then tighten the two captive screws in the flange to
secure the flange to the motor hub.
Repeat this procedure for the other four blade
assemblies. Make sure all screws are tightened.
CAPTIVE
SCREW (2)
BLADE
FLANGE
ALIGNMENT
SLOT
Figure 20
16
U.L. Model No.: 52-ANT
12.1
12. Installing the Light Fitter and Glass
SWITCH HOUSING
Remove and retain the three screws securing the
switch housing cover to the switch housing. (Figure 21)
SCREW (3)
SWITCH
HOUSING
COVER
Figure 21
12.2
Remove and retain the two wire connectors in the
switch housing (Figure 22).
SWITCH HOUSING
WIRE
CONNECTORS (2)
Figure 22
12.3
Remove plug screw (Figure 23).
SWITCH
HOUSING
COVER
SWITCH HOUSING
COVER PLUG SCREW
Figure 23
17
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
12. Installing the Light Fitter and Glass
12.4
LIGHT FITTER
LOCKWASHER
Remove and retain the lockwasher and nut from the
light fitter (Figure 24).
(Continued)
LIGHT FITTER NUT
Insert the black and white wires from the light fitter
through the center hole in the switch housing cover
(Figure 24).
SWITCH
HOUSING
COVER
LIGHT FITTER
Figure 24
12.5
Thread the switch housing cover onto the light fitter
(Figure 25).
LIGHT FITTER
LOCKWASHER
LIGHT FITTER NUT
Reinstall the lockwasher and nut and tighten securely
(Figure 25).
SWITCH
HOUSING
COVER
LIGHT FITTER
Figure 25
12.6
Connect the white wire from the ceiling fan to the white
wire of the light fitter using the previously removed wire
connector (Figure 26).
CEILING FAN
WHITE WIRE
WIRE
CONNECTOR
LIGHT FITTER
WHITE WIRE
LIGHT FITTER
ASSEMBLY
Figure 26
18
U.L. Model No.: 52-ANT
12. Installing the Light Fitter and Glass
12.7
Connect the blue wire from the ceiling fan to the black
wire of the light fitter. Use wire connector (previously
removed) to make the connection (Figure 27).
(Continued)
CEILING FAN
BLUE WIRE
WIRE
CONNECTOR
LIGHT FITTER
WHITE WIRE
LIGHT FITTER
ASSEMBLY
Figure 27
12.8
SCREW (3)
Carefully tuck all wires and splices into the switch
housing.
Attach the switch housing cover with light fitter (light kit
assembly) to the switch housing using the three
previously removed screws (Figure 28).
!
WARNING
LIGHT FITTER
ASSEMBLY
To avoid fire or electrical shock, be careful not to
pinch wires between the switch housing assembly and
the cover.
Figure 28
12.9
Install three 60-watt (maximum) candelabra base light
bulbs (supplied) into the light fitter sockets (Figure 29).
!
WARNING
Over lamping the fan will result in the lamps being
automatically shut off. Use only 60 watt maximum
candelabra base bulbs. Turn off the electricity before
replacing the bulbs.
60-WATT
CANDELABRA
LIGHT FITTER BASE LIGHT
BULBS (3)
ASSEMBLY
SOCKETS (3)
Figure 29
19
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
12. Installing the Light Fitter and Glass
12.10
(Continued)
Remove the finial nut and outer bowl cap from the light
kit assembly (Figure 30).
Pass the fan switch pull chain through the bushing in
the bowl cap (Figure 30).
FAN SWITCH
PULL CHAIN
LIGHT KIT
ASSEMBLY
BOWL CAP BUSHING
Figure 30
!
FINIAL NUT
WARNING
To avoid possible fire hazard, do not exceed wattage
indicated on the fitter.
12.11
GLASS BOWL
Position the glass bowl over the threaded nipple and
seat bowl on bowl cap (Figure 31).
Pass the fan pull chain through the bushing in the outer
bowl cap and install the cap on the threaded nipple.
Install finial nut finger tight.
CAUTION
Be sure that the fan switch chain does not make
contact with the light bulbs. If necessary reposition
the light fitter to avoid the fan switch chain from
touching the light bulbs.
OUTER BOWL CAP
FINIAL NUT
Figure 31
12.12
Install pendants onto light kit assembly pull chain and
ceiling fan speed switch pull chain using couplings
provided (Figure 32).
NOTE: It is advisable to periodically check the
tightness of the finial.
CEILING FAN SPEED
SWITCH PULL CHAIN
LIGHT KIT ASSEMBLY
PULL CHAIN
COUPLINGS (2)
PENDANTS (2)
Figure 32
20
U.L. Model No.: 52-ANT
13. Using Your Ceiling Fan
13.1
REVERSING SWITCH
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
Check the operation of the fan by gently pulling on the
light kit assembly pull chain.
Your fan is shipped from the factory with the reversing
switch positioned to circulate air downward. If airflow is
desired in opposite direction, turn the fan off and wait
for the blades to stop turning, then slide the reversing
switch to the opposite position, and turn the fan on
again (Figure 33).
The fan blades will turn in the opposite direction and
reverse the airflow.
Season
Summer
Winter
Figure 33
Reverse Switch Information
Rotation Direction
Switch Position
Counter-Clockwise
Up
Clockwise
Down
WARNING
!
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control device.
13.2
Your fan model is equipped with a 4-position,
3-speed pull chain switch (Figure 34). The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
LIGHT KIT ASSEMBLY
PULL CHAIN
CEILING FAN SPEED
SWITCH PULL CHAIN
Figure 34
21
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
14. Maintenance
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
!
WARNING
!
WARNING
Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
15. Accessories
Ceiling Fan/Light Controls (see store or catalog).
Downrod Extension Kits (see store or catalog).
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
WARNING
The use of any other control not specifically approved
for this fan could result in fire, shock and personal
injury.
16. Instruction to the User
(if device contains a digital device)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications made to the equipment without the approval of
manufacturer could void the user’s authority to operate this equipment.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
22
U.L. Model No.: 52-ANT
17. Trouble Shooting
! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLE SHOOTING YOUR FAN.
TROUBLE
1. Fan will not start.
PROBABLE CAUSE
SUGGESTED REMEDY
1. Fuse or circuit breaker blown.
1. Check main and branch circuit fuses or circuit
breakers.
WARNING: Make sure main power is
turned OFF.
2. Check line wire connections to fan and switch
wire connections in the switch housing.
!
2. Loose power line connections to the fan,
or loose switch wire connections in the
switch housing.
3. Reversing switch in neutral position.
2. Fan sounds noisy.
3. Make sure reversing switch position is all the
way to one side.
1. Blades not attached to fan.
1. Attach blades to fan before operating.
2. Screws securing fan blade flanges to motor
hub are loose.
2. Check to make sure the screws which attach the
the fan flanges to the motor hub are tight.
!
3. Fan wobbles
excessively.
4. Lamps will not
illuminate.
WARNING: Make sure main power is
turned OFF.
3. Wire connectors inside switch housing
rattling.
3. Check to make sure wire connectors in switch
housing are not rattling against each other or
against the interior wall of the switch housing.
4. Motor noise caused by solid-state variable
speed control.
4. Some fan motors are sensitive to signals from
solid-state variable speed controls. If solid-state
control is used and motor noise results, choose
an alternative control method.
5. Screws holding blades to flanges
are loose.
5. Tighten screws securely.
1. Setscrew in motor coupling is loose.
1. Tighten both setscrews securely in the motor
coupling.
2. Setscrew in hanger ball/downrod
assembly is loose.
2. Tighten the setscrew in the hanger ball/
downrod assembly.
3. Screws securing fan blade flanges to
motor are loose.
3. Check to be sure screws which attach the fan
blade flanges to the motor are tight.
4. Fan blade flanges not seated properly.
4. Check to be sure the fan blade flanges seat
firmly and uniformly to the surface of the motor.
5. Hanger bracket and/or ceiling outlet
box is not securely fastened.
5. Tighten the hanger bracket screws to the outlet
box, and/or secure outlet box.
6. Fan blades out of balance.
6. Interchanging an adjacent (side-by-side) blade
pair can redistribute the weight and result in
smoother operation.
1. Loose electrical connections.
1. Shut off the branch circuit electricity at the fuse
box or breaker panel and check the receiver
electrical connectors for proper installation.
2. The lamp is burnt out.
2. Turn the electricity off and replace the lamp with
a new 60W maximum lamp.
3. Lamp turns on and then turns off.
3. The built in circuit breaker is tripping. Check that
each lamp is 60W maximum.
23
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
18. Repair Parts
1
9
15
10
2
16
11
17
12
13
3
18
14
10
11
15
8
4
7
16
6
5
20
13
19
13
12
14
24
U.L. Model No.: 52-ANT
18. Repair Parts Listing
Model Numbers
Key
No.
*
Description
Hanger Pack Assembly,
CF712AB02
CF712WW02
CF712AW02
CF712BS02
CF712ORB02
CF712WORB02
762231
762231-1
762231-2
762231-4
762231-8
762231-8
—
—
—
—
—
—
—
—
—
—
—
—
Consisting of:
1
Hanger Bracket
2
Hanger Ball/
Downrod Assembly
3
Ceiling Cover
762218
762218-1
762218-2
762218-4
762218-8
762218-8
4
Light Fitter
763208
763208-1
763208-2
763208-3
763208-6
763208-6
5
Glass Bowl
762888-3
762888-3
762888-3
762888-3
762888-2
762888-3
6
Cover, Switch Housing
762894
762894-1
762894-2
762894-3
762894-6
762894-6
7
Flange (Set of 5)
762215
762215-1
762215-2
762215-4
762215-8
762215-8
8
Blade (Set of 5)
762228-2
762228-9
762228-8
762228-7
762228-10
762228-10
*
Parts Bag Containing:
762229
762229-1
762229-2
762229-5
762229
762229
9
Wire Connector (3)
—
—
—
—
—
—
10
Hairpin Clip
—
—
—
—
—
—
11
Clevis Pin
—
—
—
—
—
—
12
Pendant, Fan
—
—
—
—
—
—
13
Coupling (2)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
14
Pendant, Light
15
Screw, M5 x 6
16
Flange Screw,
—
—
—
—
—
—
17
Rubber Gasket
—
—
—
—
—
—
18
Blade Balance Kit
—
—
—
—
—
—
19
Finial Nut
762892
762892-1
762892-2
762892-3
762892-6
762892-6
20
Outer Bowl Cap
762891
762891-1
762891-2
762891-3
762891-6
762891-6
—
Owner's Manual
BP7300-7
BP7300-7
BP7300-7
BP7300-7
BP7300-7
BP7300-7
Washer Head (16)
Phillips Round Head (1)
Before discarding packaging material, be certain all parts have been removed.
HOW TO ORDER REPAIR PARTS
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
• PART NUMBER
• PART DESCRIPTION
• NAME OF ITEM
• MODEL NUMBER
The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.
25
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
Notes
26
U.L. Model No.: 52-ANT
Emerson Air Comfort Ceiling Fan Limited Warranty
What The Limited Warranty Covers:
This limited warranty is offered by Air Comfort Products division of Emerson Electric Co. ("Emerson" "we" or "us") located at the address stated below to the original
retail purchaser ("you" or "your") of an Emerson Air Comfort Ceiling Fan product ("Emerson Ceiling Fan") and covers the motor and the other components and
accessories of the Emerson Ceiling Fan against all defects in workmanship and materials.
What The Period Of Coverage Is:
This limited warranty will cover the Emerson Ceiling Fan motor for the expected lifetime of your Emerson Ceiling Fan (when operated in accordance with your Owner's
Manual or other instructions provided by Emerson to you with the Emerson Ceiling Fan). All other components and accessories of the Emerson Ceiling Fan are covered
by this limited warranty for a period of one (1) year from its date of original retail purchase. ANY IMPLIED WARRANTY, INCLUDING WITHOUT LIMITATION, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT IS AVAILABLE TO YOU UNDER THE LAWS OF YOUR STATE OR
PROVINCE SHALL COVER THE MOTOR FOR THE EXPECTED LIFETIME OF THE MOTOR (SUBJECT TO PROPER USE), AND FOR ONE YEAR WITH RESPECT TO
COMPONENTS AND ACCESSORIES.
No Other Express or Implied Warranty Applies:
THE LIMITED WARRANTIES PROVIDED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES PROVIDED BY EMERSON TO YOU FOR YOUR EMERSON CEILING
FAN, AND ARE IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, WHETHER ARISING BY OPERATION OF LAW OR OTHERWISE,
WHETHER OR NOT THE PURPOSE HAS BEEN DISCLOSED AND WHETHER OR NOT THE EMERSON CEILING FAN HAS BEEN SPECIFICALLY DESIGNED OR
MANUFACTURED FOR YOUR USE OR PURPOSE. EMERSON HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE FOR COMPONENTS AND ACCESSORIES AS OF THE EXPIRATION OF
THE ONE YEAR WARRANTY PERIOD FOR SUCH COMPONENTS AND ACCESSORIES. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE FOR THE MOTOR PORTION OF THE EMERSON CEILING FAN ARE LIKEWISE DISCLAIMED BY EMERSON AT SUCH TIME THAT THE
EXPECTED LIFETIME OF THE EMERSON CEILING FAN UNDER NORMAL USAGE HAS BEEN REACHED. EXCLUSIONS OR LIMITATIONS OF IMPLIED WARRANTIES
MAY VARY FROM STATE TO STATE AND PROVINCE TO PROVINCE SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
What We Will Do To Correct Problems:
If during the one (1) year warranty period the motor or any component or accessory of your Emerson Ceiling Fan is defective in materials or workmanship, or if during
the expected lifetime of the Emerson Ceiling Fan (when used in accordance with the User Manual or other instructions) the motor is defective in materials or
workmanship, you must contact Emerson during the applicable warranty period. If the defect is covered by warranty, Emerson will repair or replace the defective
motor, component or other accessory at no charge to you. If repair of the motor, component or accessory is not practical or possible within a reasonable time and no
replacement Emerson Ceiling Fan can be provided, Emerson will refund to you the actual purchase price of your Emerson Ceiling Fan. We will ship the repaired or the
replacement Emerson Ceiling Fan to you at no charge, but you are responsible for all costs of removal and reinstallation of your Emerson Ceiling Fan.
How You Can Receive Warranty Service:
You must be the original retail purchaser and have proof of your purchase of the Emerson Ceiling Fan to obtain your remedy under this limited warranty. You can
return your Emerson Ceiling Fan to your place of purchase, or you can call Emerson Customer Service at 1-800-237-6511 to obtain a return authorization and service
identification tag. In order for us to confirm that your Emerson Ceiling Fan is still under warranty, please retain your receipt or other proof of purchase and have that
information readily available when returning your Emerson Ceiling Fan to your place of purchase, or upon calling Emerson Customer Service. If you call Emerson
Customer Service, prior to your call please be prepared to provide all model numbers shown on your Emerson Ceiling Fan. Once we have processed your return
authorization request, we will provide you with a postage paid return label which should be affixed to the Emerson Ceiling Fan package you ship to the address listed at
the end of this limited warranty. The return label will be sent to the mailing address you provide to us by phone.
What Is Not Covered:
This limited warranty does not extend to and expressly excludes:
• The glass globes and light bulbs of your Emerson Ceiling Fan,
• Loss or damage to the motor or any component or accessory caused by normal wear and tear, rather than due to defects in materials or workmanship,
• Loss or damage resulting from conditions beyond our reasonable control, including without limitation, repairs not made at our factory or authorized service center,
use of parts or accessories not provided to you as part of this warranty by our factory or authorized service center, mishandling, unreasonable use, misuse, abuse,
modifications or other damage caused by you or a third party to your Emerson Ceiling Fan while not in our possession,
• Loss or damage resulting from improper installation, or other failure to comply with instructions in your Owner's Manual.
This limited warranty is deemed null and void upon the occurrence of either of the following events:
• You cease to own the Emerson Ceiling Fan product, or
• The Emerson Ceiling Fan is moved from its original point of installation.
This limited warranty is only valid within the 50 United States, the District of Columbia, and Canada. No other written or oral warranties apply, and no employee, agent,
dealer or other person is authorized to give any warranties on behalf of Air Comfort Products or Emerson Electric Co.
Limitation of Liability
REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE TO YOU UNDER THIS LIMITED WARRANTY. TO THE EXTENT PERMITTED BY
LAW, IN NO EVENT SHALL EMERSON OR ANY EMERSON AUTHORIZED DEALER BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE EMERSON CEILING
FAN OR FOR THE NEGLIGENCE OF EMERSON OR AN EMERSON AUTHORIZED DEALER. EMERSON SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN
PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT,
NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL EMERSON'S OR ANY EMERSON AUTHORIZED AGENT'S LIABILITY TO YOU OR ANY
INDIVIDUAL USING THE EMERSON CEILING FAN EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE EMERSON CEILING FAN. The term "consequential
damages" shall include, but not be limited to, loss of anticipated profits, business interruption, loss of use or revenue, cost of capital or loss or damage to property or
equipment.
How State and Provincial Law Relates To The Warranty:
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
27
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
Air Comfort Products
DIVISION OF EmErSON ElEctrIc cO.
8100 W. Florissant • St. louis, mO 63136
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service
8 a.m. - 6 p.m., Eastern, Monday-Friday
1-800-654-3545
www.emersonfans.com
Retain this manual for future use.
Part No. F40BP73000007
Revision: 150226
Printed in China
02/15
Form No. BP7300-7
U.L. Model No.: 52-ANT