Zanussi ZKT 651 D Operating instructions

Ceramic glass induction hob
ZKT 651 D
Installation and Operating Instructions
g
Dear Customer,
Please read these user instructions carefully and
keep them to refer to later.
Please pass the user instructions on to any future
owner of the appliance.
The following symbols are used in the
text:
1 Safety instructions
Warning! Notes that concern your personal
safety.
Important! Notes that show how to avoid
damage to the appliance.
3 Useful tips and hints
2 Environmental information
2
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
6
6
6
Operating the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the heat setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
7
8
9
9
10
11
13
Tips on cooking and frying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cookware for induction cooking zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
14
15
15
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
24
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
3
Operating Instructions
1 Safety instructions
3 Please
comply with these instructions. If you
do not, any damage resulting is not covered
by the warranty.
5 This appliance conforms with the following EU
Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface
or as a storage surface.
• Additions or modifications to the appliance are not
permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic
film, plastic, aluminium) on or near the appliance.
Child safety
• Small children must be kept away from the appliance.
• Only let older children work on the appliance under
supervision.
General safety
• The appliance may only be installed and connected by trained, registered service engineers, or
competent persons.
• Built-in appliances may only be used after they
have been built in to suitable built-in units and
work surfaces that meet standards.
• In the event of faults with the appliance or damage
to the glass ceramic (cracks, scratches or splits),
the appliance must be switched off and disconnected from the electrical supply to prevent the
possibility of an electric shock..
• Repairs to the appliance must only be carried out
by trained registered service engineers.
4
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used
carelessly.
• Cables from electrical appliances must not touch
the hot surface of the appliance or hot cookware.
• Overheated fat and oil can ignite quickly. When
cooking with fat or oil (e.g. frying chips) do not
leave the appliance unattended.
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep
their upper body at least 30 cm from induction
cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal,
such as knives, forks, spoons and saucepan lids
on the cooking surface, as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off
and cooled down.
• For safety reasons, the cleaning of the appliance
with steam jet or high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by
being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or
with damaged bottoms can scratch the ceramic
glass if pushed across the surface.
• Objects that melt and things that boil over can
burn onto the ceramic glass and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• The ventilation gap of 5mm between the worktop
and front of the unit underneath it must not be covered.
Description of the Appliance
Cooking surface layout
Induction cooking zone 1400W
Induction cooking zone 1800 W
Induction cooking zone 2200W
with power function 3000W
Control panel
Induction cooking zone 1800 W
with power function 2300 W
Control panel layout
Cooking zone indicators
Timer function
Power function
Heat setting selection
Timer display
On/Off
with power indicator
Lock
Display
Timer
5
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic
signals.
Touch the sensor fields from above, without covering
other sensor fields.
Sensor field
Function
On / Off
Switches appliance on and off
Increase settings
Increasing heat setting/time
Decrease settings
Decreasing heat setting/time
Timer
Timer selection
Lock
Locking/unlocking the control panel
Power
Switching the power function on and off
Displays
Display
¾
u
¿-Ç
a
e
f
h
l
p
_
Cooking zone is switched off
Keep warm setting
Keep warm setting is set
Heat settings
Heat setting is set
Automatic warm up function
Automatic warm-up function is activated
Fault
Malfunction has occurred
Pan detection
Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Residual heat
Cooking zone is still hot
Child safety device
Lock/child safety device is set.
Power
Power function is switched on
Safety cut-out
Safety cut-out has been activated
Residual heat indicator
1 Warning! Risk of burns from residual heat. Af-
ter being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator h .
3 Residual
heat can be used for melting and
keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the
residual heat of the cookware.
The cooling fan switches itself on and off depending
upon the temperature of the electronics.
6
Description
Operating the appliance
3 Use
the induction cooking zones with suitable
cookware.
Switching the appliance on
and off
Control panel
Display
Pilot light
Switch on
Touch
for 2 seconds
lights up
Switch off
Touch
for 1 second
¾/h
h / none
goes out
3 After switching on, within approx. 10 seconds
a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Selecting the heat setting
Control panel
Display
Increase
Touch
Decrease
Touch
Switch off
Touch
u to Ç / p
Ç to ¾
¾
and
at the same time
3 The keep warm setting u lies between ¾ and
¿. The keep warm setting can be set using
or
. It is used to keep food warm.
7
Using the automatic warm-up function
Step
Control panel
Display
1.
Setting the level Ç / p
2.
Place to one side for a moment
Ç/p
Ç/p
a
Æ until ¿ / u
3.
touch
4.
touch in order to set the desired cooking setting
after 3 seconds a
All cooking zones are equipped with an automatic
warm-up function. The automatic warm-up function
sets the cooking zone to the highest setting for a
certain period of time and then automatically switches back to the cooking setting that was originally set.
3 If during the automatic warm up a a higher
heat setting is selected, e.g. from Á to Ã, the
automatic warm up is adjusted.
3 Ifzonethere(display
is still residual heat on the cooking
h), the automatic warm up is
not performed.
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat setting
8
Length of the automatic warm up [min.]
v
0:10
1
0:10
2
0:10
3
3:10
4
5:50
5
10:10
6
2:00
7
2:30
8
2:50
9
---
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off”
sensor field, can be locked at any time in order to
prevent the settings being changed e.g. by wiping
over the panel with a cloth.
Control panel
Display
Switch on
Touch
l (for 5 seconds)
Switch off
Touch
previously set heat setting
3 When you switch the appliance off, the locking
function is automatically switched off.
Using the child safety device
The child safety device prevents unintentional use of
the appliance.
Setting the child safety device
Step
Control panel
Display/Signal
1.
Switch on the appliance
(Do not set a heat setting)
¾
2.
Touch
Acoustic signal
3.
Touch
until the signal sounds
l
Appliance switches off. The child safety device is set.
Releasing the child safety device
Step
1.
Control panel
Switch on the appliance
2.
Touch
3.
Touch
until the signal sounds
Display/Signal
l
Acoustic signal
Appliance switches off. The child safety device is released.
Overriding the child safety device
The child safety device can be released in this way
for a single cooking session; it remains activated afterwards.
Step
1.
2.
Control panel
Switch on the appliance
Touch
and
at the same time
Display/Signal
l
¾ / acoustic signal
Until the appliance is next switched off, it can used as normal.
9
Switching the power function on and off
The power function
makes more power available
to the induction cooking zones, e.g. to bring a large
quantity of water to the boil quickly.
The power function is activated for 10 minutes. After
that the induction cooking zone automatically
switches back to heat setting 9.
Control panel
Display
Switch on
Touch
Switch off
Touch
p
Ç
Ç
Touch
Power Management
The cooking zones have a maximum power available
to them.
If this power range is exceeded by switching on the
power function, Power Management reduces the
heat setting of another cooking zone.
The display for this cooking zone alternates for two
minutes between the set heat setting and the maximum possible heat setting. Thereafter the actual
heat setting is displayed.
Example:
Other cooking zone
Last
cooking zone switched
on
set
heat setting
set
heat setting
display
actual
heat setting
p
9
7 alternating with 9
7
3 If the power function has ended, the cooking
zones automatically switch back to the heat
setting set previously.
10
Using the timer
All cooking zones can use each use one of the two
timer functions at the same time.
Function
Condition
Outcome after the time has
elapsed
Automatic cut-out
a heat setting is set
acoustic signal
00 flashes
Cooking zone switches off
Countdown timer
cooking zones not in use
acoustic signal
00 flashes
3 Iffunction
a cooking zone is switched off, the timer
set is also switched off.
3 Ifaddition
a heat setting is set on this cooking zone in
to a countdown timer, the cooking
zone is switched off after the time set has
elapsed.
Selecting a cooking zone
Step
Control panel
Display
1.
Touch
once
Pilot light of the first cooking zone flashes
2. º
Touch
once
Pilot light of the second cooking zone flashes
3.
Touch
once
Pilot light of the third cooking zone flashes
4.
Touch
once
Pilot light of the fourth cooking zone flashes
3 If the pilot light is flashing more slowly, the
heat setting can be set or modified.
3 If other timer functions are set, after a few seconds the shortest remaining time of all the timer
functions
is
displayed
and
the
corresponding pilot light flashes.
11
Setting the time
Step
1.
2.
Control panel field
Select cooking zone
Touch
or
zone selected
Display
Pilot light of the cooking zone selected flashes
for the cooking 00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
1.
2.
Control panel field
Select cooking zone
Touch
lected
Display
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
for the cooking zone se- The time remaining counts down to 00.
The pilot light goes out.
The timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
2.
Control panel field
Select cooking zone
Touch
or
zone selected
Display
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
for the cooking 01 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
1.
Control panel field
Select cooking zone
Display
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
Acoustic signal
1.
Touch
Acoustic signal to acknowledge.
Acoustic signal stops.
12
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If one or more sensor fields are covered for longer
than approx. 10 seconds, e.g. by a pan placed
upon it, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after approx. 10 seconds.
Control panel
3 Moisture
(e.g. a wet cloth) or liquid boiling over
onto the control panel immediately switches
all cooking zones off.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils
dry) the cooking zone automatically switches itself
off. _ is displayed. Before being used again, the
cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used, f flashes
in the display and after 10 minutes the display for
the cooking zone switches itself off.
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automatically.
Heat setting
Switches off after
V, 1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hours
13
Tips on cooking and frying
3 Information about acrylamides
According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health
risk due to acrylamide. Therefore we recommend cooking at low temperatures and not
browning foods too much.
Cookware for induction cooking zones
Cookware made of
suitable
Steel, enamelled steel
yes
Cast iron
yes
Stainless steel
if appropriately labelled by the manufacturer
Aluminium, copper, brass
---
Glass, ceramic, porcelain
---
3 Cookware
for induction cooking zones is labelled as suitable by the manufacturer.
Test of suitability
Cookware is suitable for induction, if …
• ... a little water is heated on an induction cooking
zone set to heat setting 9 within a few seconds.
• ... a magnet sticks to the bottom of the cookware.
3 Certain cookware can make noises when be-
ing used on induction cooking zones. These
noises are not a fault in the appliance and do
not affect operation in any way.
Pan size
Induction cooking zones adapt automatically to the
size of the cookware bottom up to a certain limit.
However the magnetic part of the cookware bottom
must have a minimum diameter depending upon the
size of the cooking zone.
3 The cookware must be placed centrally on the
cooking zone.
14
Tips on energy saving
2
2
Place cookware on the cooking zone before it
is switched on.
If possible, always place a lid on the cookware.
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cooking
process
0
suitable for
Cook time
Tips/Hints
Off position
Keeping
food warm
Keeping cooked foods warm
as required
Cover
Melting
Hollandaise sauce,
melting butter, chocolate, gelatine
5-25 mins.
Stir occasionally
Solidifying
Fluffy omelettes, baked eggs
10-40 mins.
Cook with lid on
2-3
Simmering
Simmering rice and milk-based
dishes
Heating up ready-cooked meals
25-50 mins.
Add at least twice as much
liquid as rice, stir milk dishes
part way through cooking
3-4
Steaming
Braising
Steaming vegetables, fish
Braising meat
20-45 mins.
With vegetables add only a little liquid (a few tablespoons)
Steaming potatoes
20-60 mins.
Use only a little liquid, e. g.:
max. ¼ l water for 750 g of
potatoes
Cooking larger quantities of food,
stews and soups
60-150 mins.
Up to 3 l liquid plus ingredients
6-7
Gentle
frying
Frying escalope, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts
as required
Turn halfway through cooking
7-8
Heavy
frying
Hash browns, loin steaks, steaks,
Flädle (pancakes for garnishing
soup)
5-15 mins.
per pan
Turn halfway through cooking
9
Boiling
Searing
Deep frying
V
1-2
4-5
Boiling
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),
deep frying chips
The power function is suitable for heating large quantities of liquid.
15
Cleaning and care
1 Take care! Risk of burns from residual heat.
1 Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean
with water and washing up liquid.
1 Important Residues from cleaning agents will
damage the appliance. Remove residues with
water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little
washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place the scraper on the glass ceramic surface at
an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little
washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
immediately
when the appliance has
cooled down
sugar, food containing sugar
yes
---
plastics, tin foil
yes
---
limescale and water rings
---
yes
fat splashes
---
yes
shiny metallic discolorations
---
yes
Type of dirt
*Scrapers and cleaners for glass ceramic and stainless steel
can be purchased in specialist shops, supermarkets, the
parts department of your local Service Force Centre or from
www.shop.electrolux.co.uk
3 Remove stubborn residues with a cleaner for
glass ceramic or stainless steel.
3 Scratches or dark stains on the glass ceramic
that cannot be removed do not however affect
the functioning of the appliance.
16
using
a scraper*
cleaner for glass ceramic
or stainless steel*
What to do if …
Problem
The cooking zones will not switch
on or are not functioning
Possible cause
Remedy
More than 10 seconds have passed Switch the appliance on again.
since the appliance was switched
on
The lock is switched on l
Switch off the lock (See the section
“Locking/unlocking the control
panel”)
The child safety device is switched Deactivate the child safety device
on l
(See the section “Child safety device”)
Several sensor fields were touched Only touch one sensor field
at the same time
The sensor fields are partly covered Remove the cloth or the liquid.
by a damp cloth or with liquid
Switch the appliance on again.
Safety cut-out has been triggered
The residual heat indicator is not
displaying anything
If the cooking zone is supposed to
The cooking zone was only on for a
be hot, call your local Service Force
short time and is therefore not hot
Centre.
The automatic warm up function is There is still residual heat on the
not switching itself on
cooking zone h
Repeated acoustic signal (6x), appliance switches off
Switch the appliance on again
Let the cooking zone cool down
The highest heat setting is set Ç
The highest heat setting has the
same power as the automatic warm
up function
One or more sensor fields have
been covered for longer than 10
seconds
Uncover sensor field
Acoustic signal sounds and appli- The On/Off sensor field has been
ance switches itself on and then off covered up, e.g. by a cloth
again; after 5 seconds another
acoustic signal sounds
Do not place any objects on the
control panel
Display is switching between two
heat settings
Power management is reducing the See the section “Switching the
power of this cooking zone
power function on and off”
f flashes
Unsuitable cookware
Use suitable cookware
No cookware on the cooking zone
Place cookware on the cooking
zone
The diameter of the bottom of the Move onto a smaller cooking zone
cookware is too small for the cook- Use suitable cookware
ing zone
_ is lit
Overheating protection for the
cooking zone has been triggered
Switch off the cooking zone.
Switch the cooking zone on again
e and number are displayed
Electronics fault
Disconnect the appliance from the
electrical supply for a few minutes
(Take the fuse out of the house’s
wiring system)
If after switching on again, e is displayed again, call the customer
service department
17
If you are unable to remedy the problem by following the above suggestions, please contact
your local Service Force Centre.
1 Warning!
Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3 If the appliance has been wrongly operated,
the visit from the service technician or dealer
may not take place free of charge, even during
the warranty period.
Disposal
2
Packaging material
2
Old appliance
The packaging materials are environmentally
friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging
materials in the appropriate container at your
local waste disposal facilities.
W
The symbol
on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it shall be
handed over to the applicable collection point
for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
18
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in
force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the
regulations, etc.)
Installation may only be carried out by a qualified
electrician.
The minimum distances to other appliances and
units are to be observed.
A protective floor must be installed under the appliance.
The cut surfaces of the worktop are to be protected
against moisture using a suitable sealant.
The sealant seals the appliance to the work top with
no gap.
When building in, protect the underside of the appliance from steam and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be
knocked off the rings when doors and windows are
opened.
1 WARNING!
Risk of injury from electrical current.
The electrical mains terminal is live.
Observe connection schematic.
Observe electrical safety rules.
Ensure anti-shock protection through correct installation by a qualified electrician.
• The appliance must be connected to the electrical
supply by a qualified electrician.
•
•
•
•
1 IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping joints correctedly installed by a
qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains cable of type H05BB-F
Tmax 90° (or higher) must be used.
• If this appliance’s mains cable is damaged, it must
be replaced by a special cable (type H05BB-F
Tmax 90°; or higher). Please contact your local
Service Force Center for further advice.
A device must be provided in the electrical installation which allows the appliance to be disconnected
from the mains at all poles with a contact opening
width of at least 3 mm
Suitable isolation devices include line protecting cutouts, fuses (screw type fuses are to be removed from
the holder), earth leakage trips and contactors.
19
Sticking on the seal
• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape
supplied all the way round the lower edge of the
cooking surface along the outer edge of the glass
ceramic panel. Do not stretch it. The cut ends
should lie in the middle of one side. When you
have cut it to length (add a few mm), press the two
ends flush up against one another.
20
Assembly
21
22
23
Rating Plate
ZKT 651 D
55GAD80AG 230 V
949 591 494
50 Hz
Induction 7,2 kW
7,2 kW
ZANUSSI
24
Warranty conditions
Standard guarantee conditions
European Guarantee
We, Zanussi, undertake that if within 24 months of
the date of the purchase this Zanussi appliance or
any part thereof is proved to be defective by reason
only of faulty workmanship or materials, we will, at
our option repair or replace the same FREE OF
CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed and
used only on the electricity supply stated on the
rating plate.
• The appliance has been used for normal domestic
purposes only, and in accordance with the manufacturer’s instructions.
• The appliance has not been serviced, maintained,
repaired, taken apart or tampered with by any person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre.
• Any appliance or defective part replaced shall become the Company’s property.
• This guarantee is in addition to your statutory and
other legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside
these hours in which case a premium will be
charged.
If you should move to another country within Europe
then your guarantee moves with you to your new
home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the
same extent for labour and parts as exists in the
new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community
(EC) or European Free Trade Area.
• The product is installed and used in accordance
with our instructions and is only used domestically,
i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details
of your new home. They will then ensure that the local Service Organisation is aware of your move and
able to look after you and your appliances.
Exclusions
France
Germany
Italy
Sweden
UK
Senlis
Nürnberg
Pordernone
Stockholm
Luton
+33 (0) 3 44 62 20 13
+49 (0) 800 234 7378
+39 (0) 800 11 7511
+46 (0) 20 78 77 50
+44 (0) 8705 727 727
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
• Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
• Products of Zanussi manufacture which are not
marketed by Zanussi.
25
26
Service and Spare Parts
If the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact
Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to
the Service Force Centre covering your post code area.
For the address of your local Service Force Centre
and further information about Service Force, please
visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you
have read the details under the heading „What to do
if...“
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance
(found on the rating plate)
5. The purchase date.
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls.
Customer Care
For general enquiries concerning your Zanussi appliance, or for further information on Zanussi products
please contact our Customer Care Department by
letter or telephone at the address below or visit our
website at www.zanussi.co.uk..
Customer Care Department
Major Appliances
Zanussi
Addington Way
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 350350 (*)
For Customer Service in the Republic of Ireland please contact us at the address below:
AEG/ Electrolux Group (Ire) Ltd
Long Mile Road/ Dublin 12
Republic of Ireland
Tel: +353 (0) 1 4090751
Email: service.eid@electrolux.ie
(*) Calls may be recorded for training purposes
27
822 924 805-B-220905-05
Subject to change without notice
The Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products
(such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in
more than 150 countries around the world.