Audiovox FP1520 Operating instructions

AUDIO OX
E L E C T R O N I C S
C O R P .
15" LCD TV
Operating Instructions
Model No. FP1520
For assistance, please call: 1-800-645-4994
Or visit us at WWW.AUDIOVOX.COM
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference
For Customer Service
Visit Our Website At
www.audiovox.com
Product Information, Photos,
FAQ's, Owner's Manuals
128-6777
Important Safety Instructions:
Read Instructions
All the safety and operating instructions should be read before the product is operated.
Retain Instructions
The safety and operating instructions should be retained for future references.
Heed Warnings
All Warnings on the product and in the operation instructions should be adhered to.
Follow Instructions
All Operating and user instructions should be followed.
Cleaning
Unplug this product from the wall outlet before cleaning. DO NOT use liquid cleaners or
aerosol cleaners. Use damp Cloth for cleaning.
Attachments
DO NOT use attachments not recommend by the product manufacturer they may cause
hazards.
Mounting
DO NOT place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the product. Any mounting of this product should follow the
manufacture's instructions, and should use a mounting accessory recommended by the
manufacturer.
Heat
The Product should be situated away from heat source such as radiators, heat registers,
stoves or other products (including amplifiers) that produce heat.
Water
DO NOT use this product near water. For example: Avoid placing it near bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool,
ETC¡K
Cabinet Slots
NEVER push objects or any kind into the unit through the cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a fire or electric
shock. NEVER spill liquid of any kind on the product.
Ventilation
DO NOT block any ventilation openings. Install in accordance with manufacture's
instructions. Slots and openings in the cabinet and the back and bottom are provided
for ventilation, and to ensure reliable operation of the product and to protect it from
Overheating. These openings must NOT be blocked or covered. There should be at
least 10cm of space from these openings. The openings should never be blocked by
placing the unit on a bed, rug or other similar surface. This product should NOT be
placed in a built-in installation such as a bookcase unless proper ventilation is provided.
1
Important Safety Instructions Continued
Grounding or Polarization
This product may be equipped with a polarized alternating current line plug (a plug
having one blade wider then the other). This plug will fit the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. DO NOT defeat the safety purpose of the polarized plug.
Power - Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
Power Sources
This product should be operated only from the type of power source indicated on the rear
panel. If you are not sure of the type of power supply to your home consult your product d
ealer or local power company.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended
and unused for a long period of time, unplug it from the outlet and disconnect the antenna
or cable system. This will prevent damage to the product due to lightning and power-line
surges.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits, as contact with them might be fatal.
Overload
DO NOT overload wall outlets, extension cords or integral convenience receptacles as
this can result in a risk of fire or electric shock.
Damages Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions.
¡PWhen the power-supply cord or plug is damaged.
¡PIf liquid has been spilled, or objects have fallen into the product.
¡PIf the product has been exposed to rain or water.
¡PIf the product does not operate normally after following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
¡PIf the product has been dropped or damaged in any way.
¡PWhen the product exhibits a distinct change in performance - this indicates a
need for service.
2
Important Safety Instructions Continued
Replacement parts
When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as
the original part. UNAUTHORIZED substitution may result in fire, electric shock or
other hazards.
Safety Check
Upon completion of any service or repair to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
CAUTION
Danger of explosion if remote battery is incorrectly replaced. Replace only with the
same or equivalent type.
Storage
Store LCD TV in a dark room at room temperature and low humidity in the origional
packing condition, to avoid condensation that may cause failure.
Handling
Since the LCD TV consists of glass and precise electronic components, it will be
damaged by excessive shock or drop. Please handle the LCD TV carefully to
minimize shock during transportation.
Important Information Regarding Use of Video Games, Computer, Captions or other
Fixed Image Displays.
The Extended use of a fixed image program material can cause permanent "Shadow
Image" on the LCD Panel. The Background image is viewable on normal programs in
the form of stationary fixed image. This type of irreversible LCD panel deterioration
can be limited by observing the following steps:
Reduce the brightness/contrast setting to a minimum viewing level.
DO NOT display the fixed image for extended periods of time.
Turn the power off when not in actual use.
Recycling
This product utilizes tin-lead solder, and has a fluorescent lamp containing a small
amount of mercury. Disposal of these materials may be regulated in your community
due to environmental considerations. For disposal or recycling information please
contact you local authorities, or the Electronics Industries Alliance: http://www.eiae.org/
3
Important Safety Instructions Continued
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The Lightning flash with the arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated "DANGEROUS
VOLTAGE" within the product's enclosure that may be of sufficient
magnitude to constitute a risk or electric shock to persons.
The Exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing instructions in the literature accompanying the product).
Federal Communication Commission Information (FCC)
This Equipment has been tested and found to comply with the limits for a TV
Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications If this equipment does
cause or receive interference, which can be determined by turning equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
¡PReorient or relocate the TV antenna
¡PIncrease the separation between TV and other equipment.
¡PConnect TV into separate outlet from equipment.
¡PConsult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment
4
CONTENTS
1. INTRODUCTION
Important Safety Instructions -------------------------------------------------------01~04
Product Description -------------------------------------------------------------------------06
Product Features -----------------------------------------------------------------------------07
Package Contents ----------------------------------------------------------------------------08
2. SYSTEM SETUP
Top Panel & Remote Controller Function -------------------------------------09~12
Assembly and Connections --------------------------------------------------------------13
Input/Output Signal Connections -------------------------------------------------14~17
3. FP1520 OPERATING INSTRUCTIONS
TV and AV Manual Operating Instructions -----------------------------------18~31
Using the FP1520 as a Computer Monitor -----------------------------------32~37
4. REFERENCE
Display Modes ----------------------------------------------------------------------------------38
LCD Monitor Display Angle ---------------------------------------------------------------38
5. APPENDIX
Troubleshooting -----------------------------------------------------------------------------39~43
Specification --------------------------------------------------------------------------------------44
5
1. INTRODUCTION
Product Description
Thank you for choosing the AUDIOVOX FP1520 TFT-LCD Color TV/Monitor and for your continued
support and use of our products.
The FP1520 combines the features of a TV/MONITOR with a THIN FILM TRANSISTOR liquid crystal
display (TFT-LCD).
This new generation of TFT-LCD incorporates a high quality display in a light weight module.
As such the unit has power-saving capabilities and emits no X-ray radiation. There are many benefits
from this TFT-LCD namely comfort, safety, and environmental protection.
The FP1520 features a 15" color-active matrix, Thin-Film-Transistor (TFT) Liquid Crystal Display (LCD)
to provide superior display performance. A maximum resolution of 1024x768 is ideal for displaying
complex graphics and high definition images from your computer. Other outstanding features include
freedom from video oscillations and selection of various choices of digital video and audio signal inputs.
You will get the feeling that the large-sized surface of operation with the Video - On - Video (VOV)
feature, together with the high-quality 3D stereo speakers and remote high-level amplifiers
connections,provides a coherent, top-of-the-line Audio and Video systems for viewing pleasure.
In addition the TFT-LCD display allows "Plug & Play" connection to your PC and has a built-in On
Screen Display (OSD) functions that can operate from the convenience of a remote control.
6
Product Features
TFT-LCD screen connected with Computer support DDC1/2B for"Plug & Play"compatibility.
15-Inch high-resolution LCD Monitor which supports XGA 1024x768 resolution.
Super 2,359,296 high-resolution pixels to enhance TFT-LCD definition.
2
Super 450cd/m high-brightness for picture enjoyment.
Super wide viewing angle : Horizontal : 130 , Vertical : 120 .
Super-low power consumption ; 50% more power saving than conventional TV.
Super 9300 color temperature for LCD monitor choice of color.
Internal subtitle decode function to precisely display multi-language capability
CATV full-frequency channel receive capability
AV-terminal input and S-Video inputs for high-quality pictures.
3D Stereo for realistic acoustics.
Slim space-saving feature of up to 70% compared with a normal CRT monitor.
Light design reduces weight by 15% compared with traditional TV monitor.
High contrast ratio of 500 : 1 provides optimum clear image.
Multi-digital input terminal provides a host of video and audio choices.
Supports Video-On-Video ; VOV can display multiple video sources at one time.
Intelligent screen image setting
Intelligent Window Control Surface to simplify function settings.
Built-in wall mounting ; Detachable stand enhances wall-mounting application.
7
Package Contents
Please check the FP1520 Package to make sure it contains the following items :
SPEAKERS
15"TFT-LCD
BASE TRANS
Slim-type
Remote Control
Power Transformer Cord
(Mounted in base from the factory)
Power Cord
AUDIO OX
E L E C T R O N I C S
C O R P .
15" LCD TV
Operating Instructions
Model No. FP1520
For assistance, please call: 1-800-645-4994
Or visit us at WWW.AUDIOVOX.COM
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference
For Customer Service
Visit Our Website At
128-6340
www.audiovox.com
Product Information, Photos,
FAQ's, Owner's Manuals
VGA Cable
User Manual
8
Right-angle adapter
2. SYSTEM SETUP
Top Panel & Remote Control Function
TOP PANEL :
VOL- MENU VOL+
VOL - :
MENU :
VOL + :
POWER :
CH :
CH +
:
IR
:
POWER
CH-
CH+
Volume down Button : decreases volume
Menu Button : Selects command function
Volume up Button : Increases volume
Power Button : Power on/off control
Channel down Button : Decreases setting channel
Channel up Button : Increases setting channel
Remote IR detect window : Receives IR signal from
remote control
IR
Remote Control Unit :
9
Remote Control Buttons :
POWER
1
To turn Power On/Off
2
KEYPAD
11
Auto
Scans signal c hannels TV and CA TV
OSD Display
12
Chooses on-screen subtitle color
MUTE
Main Disp Switch
13
Chooses Main Displa y for AV, SV,CATV, TV, PC
Turns volume off
Sub Disp Switch
14
4
, inc luding y ello w,
blue , white and b lac k
Press number ke y to select c hannel of TV
3
AUTO
Ch+
Chooses Sub Displa y for AV, SV,CATV, TV
CH+
Increases TV channel setting
Sub Disp Mo ve
15
5
Ch-
Press to show VOV,sub picture and shift its position to
one of f our vie wing angles in TV
CHDecreases TV channel setting
VOV Swap
16
6
Enter
Switc hes Video-On-Video in the
TV windo w
ENTER
Enters command ke ypad functions
BACKWARD
17
Selects ne xt men u item
7
8
Vol-
Vol+
VOLDecreases v olume setting
CANCEL
18
Cancels OSD
VOL+
Increases v olume setting
FORWARD
19
Selects pre vious men u item
ADJ
9
ADJ
10
Info
Men u
Adjusts the saturation,hue ,brightness
and contrast functions
20 Men u
INFO
Displa ys the signal sour ce of the current c hannel
Displa ys the main men u on screen
RECALL
21
10
Recall
Recalls the last c hannel vie wed
Remote Control Battery Installation/Removal :
Open
+
-
CR2025
3V
Open
+
-
Pull out
CR2025
3V
LITHIUM BATTERY
CR2025
3v
IMPORTANT !!
The Remote Control is shipped with
the Battery pre-installed and protected
with a Plastic Shipping Tab. This Tab
must be removed prior to attempting
to operate the unit.
Plastic ShippingTab
Change the Battery if the Remote Control no longer operates the FP1520.
LITHIUM BATTERY
CR2025
3v
Caution :
Only use CR2025 type Battery.
Confirm the polarity(+/-) of battery before installing
Removal the battery if the Remote Control is not to be
used for a long time.
11
Re m o t e C o n t r o l O p e r at i n g I n s t r u c t i o n :
T h e R e m o t e C ont r o l Tra n sm i ssi o n co n si st s o f a n Infrared (IR) Si gnal .
Ma ke s ur e t h e l i ne- o f - si g h t b e t we e n Re m o t e C o n trol and FP1520 i s c l ear of
o b je ct s t h a t c oul d i n t e r fe r e wi t h t h e r e m o t e I R si gnal . Al way s poi nt the Remote
C o n t r ol d i r ec t l y at t h e F P 1 5 2 0 se n so r.
IR s ens or
30
30
CAUTION !!
Avo id dam agi ng t he Re m o t e C o n t r o l by :
A ppl y i n g ex c e s s i ve p r e ssu r e w h e n p r e ssi n g buttons
E x p o s i ng t o ex t r e m e L ow o r H i g h t e m p e ra t u r es
E x p o s i ng t o ex c e ssi ve M o i st u r e
Mishandling to Dropping
12
As s em b l y a n d C o n n e c t i o n
T h e Sp e a ke r s we r e p r e m o u n t e d t o t h e T V d i sp l ay i n the fac tor y pr i or to s hi pment.
L o c a te t h e power c a bl e i n t h e a cce sso r y b ox a n d co nnec t i t to the bas e uni t.
Plu g th e ot h e r e n d of t h e p owe r ca bl e i n t o t h e wa l l outl et.
Th e a d a p t e r i s p r e m o u n d e d i n the bas e uni t.
13
Input/Output Signal Connections
1
2
3
DC-IN
TV-ANT
4
EARPHONE
1. ANT. CABLE INPUT
2. POWER ADAPTER INPUT
3. EARPHONE OUTPUT
4. RIGHT SPEAKER OUTPUT
5. LEFT SPEAKER OUTPUT
6. VGA INPUT
7. A-VIDEO INPUT
8. RIGHT AUDIO INPUT
9. LEFT AUDIO INPUT
10. S-VIDEO INPUT
Connecting TV Cable
TV ANT
14
5
SPEAKER
R
L
6
VGA IN
7
8
9
VIDEO IN
10
S-VIDEO IN
AUDIO IN
R
L
DC Power Socket
DC-IN
Connecting Left and Right Speakers
SPEAKER
R
L
15
Connecting to S-video terminal equipment such as
DVD, VCR or Gaming Console.
S-VIDEO IN
IN
VIDEO
OUT
L
R
FROM ANT
OUT
TO TV
S-VIDEO
Connecting to 15-PIN VGA from a PC
VGA-IN
VGA-OUT
16
Connecting to AV-terminal equipment such as
DVD, VCR, and Gaming Console.
VIDEO IN
Yellow
Yellow
White
AUDIO IN
R
L
Red
White
Red
IN
S-VIDEO
OUT
VIDEO L
R
FROM ANT
OUT
TO TV
17
3.F P1520 OPERATING INSTRUCTIO NS
TV and AV Op er ating Instr uctions
MAI N DI SP
P re s s and r el eas e t h e M e nu bu t t o n
to d i s pl ay t he fo l l owi n g M a i n M e nu
fo r T V a n d AV f u n ct i o n s :
Press a nd rel eas e the Menu button again
to access the MAIN DISP menu :
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
AUDIOVOX
VGA
AVIDEO
SVIDEO
CATV
TV
RETURN
640X480
H:31.4KHZ V:59.8HZ
640X480
H:31.4KHZ V:59.8HZ
MAIN DISPLAY OPTIONS :
NOTE :
Scr een Resolution
(W ill var y)
1 . M a i n D i s pl ay
2 . S u b D i s pl ay
3 . S o u n d O pt i o n
INPUT SIGNAL SELECTIONS :
4 . Cl os e S u b t i t l e
1 . VGA-Computer Input Si gnal
5 . Pa r ent C o n t r o l
2 . AVIDEO -A-Vi deo Input Si gnal
6 . O n- S c r een- D i s p l ay( O S D ) O p t i o n
3 . S V IDEO -S-Vi deo Input Si gnal
7 . T V M o d e O pt i o n
4 . CATV-Cabl e TV Input Si gnal
8 . B r i ght n e s s
5 . T V-TV Input Si gnal
9 . Cont ra s t
RE T U RN to Prev i ous Menu
1 0 . S a t urat i o n
11. Hue
12. Shar pness
1 3 . R e c al l
14. Exit
18
SUB DISP (sub display)
SUB DISP has four signal inputs - AVIDEO, SVIDEO, CATV and TV. These inputs are used to
connect to a DVD-Player, VCR etc.
1. AVIDEO (AV-Terminal)
2. SVIDEO (S-Terminal)
3. CATV
4. TV
5.Video-On-Video(VOV) OFF
6.RETURN
With the Main Menu displayed, Press a n d
re le as e t h e
Press and rel eas e the MENU button to
display the SUB DISP Menu :
but t o n to highlight
SU B D I S P
AUDIOVOX
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
AVIDEO
SVIDEO
CATV
TV
VOV OFF
RETURN
640X480
H:31.4KHZ V:59.8HZ
640X480
H:31.4KHZ V:59.8HZ
Press a nd rel eas e the
button to
highlight AVIDEO. Then Press and
r e l e a s e the Menu button to select
AVIDEO for (Video-On-Video) viewing.
AUDIOVOX
AVIDEO
SVIDEO
CATV
TV
VOV OFF
RETURN
640X480
H:31.4KHZ V:59.8HZ
19
T h e n Pres s and rel eas e the Menu
With the Main Menu displayed, use the
button to select VOV ADJUST
bu t t on to s el ec t VOV adj us tments :
AUDIOVOX
AUDIOVOX
VOV POSITION
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
BORDER SIZE
BORDER COLOR
RETURN
MAIN DISP
SUB DISP
VOV ADJUST
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
800X600
H:53.6KHZ V:84.8HZ
800X600
H:53.6KHZ V:84.8HZ
W i t h t h e VOV PO SITIO N Menu di s pl ayed,
u se t h e
3
2
4
1
button to s el ec t the
VOV P OSITIO N des i red then Pres s Menu
t o d i sp l ay
AUDIOVOX
POSITION 1
POSITION 2
POSITION 3
POSITION 4
NOTE :
800X600
H:53.6KHZ V:84.8HZ
Po s i t i o n 1 - B ot t o m Ri g h t
Po s i t i o n 2 - B ot t o m L e f t
P r e ss the
Po s i t i o n 3 - U pp e r L e f t
button to s el ec t
Po si ti on. Pres s and rel eas e the
Po s i t i o n 4 - U pp e r Ri g h t
M e nu button to go back to the
p r evi ous Menu.
20
N OT E :
T h e fo l l ow i ng a d j u st m e n t s w i l l e f fe ct t h e VOV onl y, not the Mai n di s pl ay.
AUDIOVOX
VOV POSITION
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
BORDER SIZE
BORDER COLOR
RETURN
800X600
H:53.6KHZ V:84.8HZ
BRIGHTNESS
CONTRAST
120
192
Press t he
bu tto n to a d ju st
set t i ng and t hen P r e ss a n d r e l e a se
t h e M enu but t o n t o co n fir m a n d
ret ur n t o previ ou s p a g e.
Pr e ss t h e
bu t t o n t o a d ju s t
se tting a n d t h e n Pres s and rel eas e
t h e M e nu button to c o n f ir m a n d
r e tu r n t o p rev io u s p a g e.
SATURATION
HUE
200
128
Press t he
bu tto n to a d ju st
set t i ng and t hen P r e ss a n d r e l e a se
t h e M enu but t o n t o co n fir m a n d
ret ur n t o previ ou s p a g e.
Pr e ss t h e
bu t t o n t o a d ju s t
se tting a n d t h e n Pres s and rel eas e
t h e M e nu button to c o n f ir m a n d
r e tu r n t o p rev io u s p a g e.
SHARPNESS
BORDER SIZE
0
3
Press t he
bu tto n to a d ju st
set t i ng and t hen P r e ss a n d r e l e a se
t h e M enu but t o n t o co n fir m a n d
ret ur n t o previ ou s p a g e.
Pr e ss t h e
bu t t o n t o a d ju s t
se ttin g a n d t h e n Pres s and rel eas e
t h e M e nu button to co n f ir m a n d
r e tu r n t o p revio u s p a g e.
BORDER COLOR
124
P ress t he
bu tto n to a d ju st
set t i ng and t hen P r e ss a n d r e l e a se
t he M enu bu t t o n t o co n fir m a n d
ret ur n t o previ o u s p a g e.
21
AUDIO
Select the desired level of GAIN, BASS, TREBLE and LOUDNESS.
1. AUDIO CHANNEL - Choose Audio Input Source (A-Video, TV).
2. GAIN - Adjusts Audio Gain
3. BASS - Adjusts Bass
4. TREBLE - Adjusts Treble
5. LOUDNESS - On or Off
Access the Main Menu and
highlight AUDIO then press and
r e l e a s e the Menu button to
6. RETURN - Back to Main Menu Display
select.
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
640X480
EXIT
NOTE :
Use the and to move between the
options, also use the and to adjust
progress bar.
H:31.4KHZ V:59.8HZ
AUDIOVOX
AUDIOVOX
AV
TV
RETURN
AUDIO CHANNEL
GAIN
BASS
TREBLE
LOUDNESS
RETURN
640X480
H:31.4KHZ V:59.8HZ
640X480
H:31.4KHZ V:59.8HZ
AUDIOVOX
AUDIO CHANNEL
GAIN
BASS
TREBLE
LOUDNESS
RETURN
640X480
H:31.4KHZ V:59.8HZ
GAIN
BASS
2
10
TREBLE
LOUDNESS
YES
8
22
NO
CLOSE CAPTION
The caption can display the spoken audio content of picture.
1. CAPTION - You can choose to show the caption or not.
2. DISPLAY :
a. BOX - You can choose to box the caption.
b. SHADOW - You can choose to show the caption in shadow (not boxed) format.
3. RETURN - Back to main menu display
NOTE :
Not all channels display CLOSE CAPTION.
With the Main Menu displayed, Press a n d
Press and rel eas e the Menu button to
display the CAPTION Menu.
re le a s e t h e
button to highlight
CLOSE CAPTION
AUDIOVOX
AUDIOVOX
NO
BOX
CAPTION
DISPLAY
RETURN
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
640X480
H:31.4KHZ V:59.8HZ
640X480
H:31.4KHZ V:59.8HZ
Press a nd r el eas e t h e Menu button to select
CAPTION(1-4)and text (1-4) options.
Press and rel eas e the Menu button to select
DISPLAY.
AUDIOVOX
CAPTION
DISPLAY
RETURN
AUDIOVOX
NO
CAP 1
CAP 2
CAP 3
CAP 4
TXT 1
TXT 2
TXT 3
TXT 4
CAPTION
DISPLAY
RETURN
640X480
H:31.4KHZ V:59.8HZ
BOX
SHADOW
640X480
H:31.4KHZ V:59.8HZ
23
PARENT CONTROL
With the Main Menu displayed,
Press a n d r e l e a se t h e
button
to highlight PARENT CONTROL :
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
640X480
H:31.4KHZ V:59.8HZ
Input the four-digit Parent Control Password
and confirm using the Menu button
(Default Code is 3308)
PARENT CONTROL
After entering the Password, the following
menu will appear :
AUDIOVOX
SET PASSWORD
V-CHIP LOCK
CLASS OPTION
MPAA OPTION
RETURN
640X480
H:31.4KHZ V:59.8HZ
After accessing the Parent Control Menu,
highlight SET PASSWORD and Press and
r e l e a se t h e Menu button.
Then enter a 4-digit Password to change
the Parental Control Menu Password.
24
PARENT CONTROL (continued)
From the PARENT CONTROL Main Menu.
Press a n d r e l e a se t h e
button to
highlight V-CHIP lock then Press and
r e l e a se t h e Menu button :
V-CHIP LOCK
YES
NO
Enable the V-CHIP lock function by Selecting
YES and disable by selecting NO.
From the PANRENT CONTROL Main Menu.
Press a n d r e l e a se t h e
button to
highlight CLASS OPTION on Main Parental
Control Menu :
AUDIOVOX
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
RETURN
640X480
H:31.4KHZ V:59.8HZ
Select the desired age class and Press and
r e l e a se t h e Menu button.
Select RETURN to go back to the Parental
Control Main Menu.
25
PARENT CONTROL (continued)
PARENTAL CONTROL RATINGS
From the PARENT CONTROL Main Menu.
Press a n d r e l e a se t h e
button to
highlight MPAA OPTION and
press menu :
AUDIOVOX
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
G
PG
PG-13
R
NC-17
X
RETURN
640X480
H:31.4KHZ V:59.8HZ
Select the desired rating level and press Menu.
Select RETURN to return to the main parental
control menu.
CLASS OPTION
a. TV-Y
b. TV-Y7
c. TV-G
d. TV-PG
MPAA OPTION
e. TV-14
f. TV-MA
g. Return
a. G
b. PG
c. PG-13
d. R
26
e. NC-17
f. X
g. RETURN
ON SCREEN DISPLAY(OSD) SETUP :
With the Main Menu displayed, Press a n d
re le as e t h e
SETUP
Press and rel eas e the Menu button to
select LANGUAGE, OSD COLOR or OSD
TIMER
button to highlight OSD
AUDIOVOX
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
LANGUAGE
OSD COLOR
OSD TIMER
RETURN
640X480
H:31.4KHZ V:59.8HZ
640X480
H:31.4KHZ V:59.8HZ
OSD LANGUAGE :
OSD COLOR :
Using the
button, select the desired
LANGUAGE
Using the
button, select the desired
OSD Message Color then Press and
release the Menu button to confirm
AUDIOVOX
AUDIOVOX
ENGLISH
YELLOW
BLUE
WHITE
BLACK
RETURN
640X480
H:06.9KHZ V:13.2HZ
640X480
H:06.9KHZ V:13.2HZ
OSD TIMER :
OSD TIMER
Using the
button, select the amount of
time you would like the OSD Massage to
be viewed (5,10,15 seconds) then Press
and release the Menu button to confirm
5
27
10
15
With the MAIN MENU displayed,
Select TV SETUP using the Menu
button :
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
640X480
H:31.4KHZ V:59.8HZ
Select TV SETUP and highlight ERASE/
ADD then Press and release the Menu
button.
Using the
button, select ERASE or
ADD then Press and release the Menu
button to confirm.
AUDIOVOX
ERASE/ADD
AUTO PROGRAM
RETURN
ADD/ERASE
ERASE
ADD
NOTE : This function can ERASE or ADD
the present display's channel.
640X480
H:31.4KHZ V:59.8HZ
Select TV SETUP and highlight AUTO
PROGRAM then Press and release the
Menu button.
Using the
button, select YES or NO.
(No need to press Menu button, The
Autoprogram will Autostart).
AUDIOVOX
ERASE/ADD
AUTO PROGRAM
RETURN
AUTO PROGRAM
YES NO
NOTE :
Users need to perform Auto Program
when the source is first connected to
the tuner module to ensure every
Channel is stored in the TV's memory.
640X480
H:31.4KHZ V:59.8HZ
28
AUDIOVOX
With the MAIN MENU displayed, select
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
BRIGHTNESS, CONTRAST, SATURATION,
HUE or SHARPNESS then Press and
release the Menu button to confirm. The
following screen(s) will be displayed (see
screens below)
640X480
H:31.4KHZ V:59.8HZ
BRIGHTNESS
CONTRAST
Adjusts the overall image and background
Adjusts the image brightness in relation to the
screen brightness.
background.
CONTRAST
BRIGHTNESS
133
173
Pr es s the
P r e s s th e
bu t t o n t o a d ju st se t t in g
bu tto n to a d j u s t s e tti n g
th en pres s Menu t o r e t u r n t o t h e p r evio u s
t h e n p r e s s M e nu to r e tu r n to th e
menu.
p r ev i o u s m e nu .
SATURATION
Adjusts the color gradations in relation to the
HUE
Adjusts the color definition in relation to image
images and background.
and background.
SATURATION
HUE
120
31
Pres s the
bu t t o n t o a d ju st se t t in g
then pres s Menu to r e t u r n t o t h e p r evio u s
P r e s s th e
bu tto n to a d j u s t s e tti n g
t h e n p r e s s M e nu to r e tu r n to th e
menu.
p r ev i o u s m e nu .
SHARPNESS
Adjusts the overall image and background
screen sharpness.
SHARPNESS
10
Pres s the
bu t t o n t o a d ju st se t t in g
th en pres s Menu to r e t u r n t o t h e p r evio u s
menu.
29
W i t h t h e M A I N M E N U d i sp l ayed,
S e l e ct RE C A L L u si n g t h e M enu button
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
640X480
H:31.4KHZ V:59.8HZ
RECALL
Automatically reset setting to factory defaults.
RECALL
YES
NO
Press the
bu t t o n s t o se l e ct Y E S or NO opti on,
(No need to select Menu, the RECALL will happen Automatically).
30
EXIT
Exits the on-screen-menu controls
W i t h t h e M A I N M E NU d i sp l ayed, s el ec t
E X I T u si n g t h e M E N U bu t t o n to ex i t the
MAIN MENU
AUDIOVOX
MAIN DISP
SUB DISP
AUDIO
CLOSE CAPTION
PARENT CONTROL
OSD SETUP
TV SETUP
BRIGHTNESS
CONTRAST
SATURATION
HUE
SHARPNESS
RECALL
EXIT
640X480
H:31.4KHZ V:59.8HZ
31
Using t he FP1520 as a C omputer Mo n ito r
P re s s t he
bu t t o n t o h i g h l i g h t
MA I N D I S P and P r e ss a n d r e l e a se
S e l e c t VG A and Pres s and rel eas e
th e M enu but t on.
t h e M enu button.
AUDIOVOX
VGA
AVIDEO
SVIDEO
CATV
TV
RETURN
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
800X600
H:53.6KHZ V:84.8HZ
AUDIOVOX
800X600
H:53.6KHZ V:84.8HZ
NOTE :
The CLOSE CAPTION and PARENT CONTROL options will not appear in the Main Menu
until a TV program has been accessed using the SUB DISP menu.
32
AUTO TUNE
Automatically optimizes the VGA signal for viewing.
With the Main Menu displayed,use
the
button to select AUTOTUNE
AUDIOVOX
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
800X600
H:53.6KHZ V:84.8HZ
Then Press and release the Menu button
to display the following screen :
AUTOTUNE
DOING
AUTOTUNE :
Only worked when unit is connected to computer
and the screen will appear "DOING"
CONTRAST
Adjusts the image brightness in relation to the
BRIGHTNESS
Adjusts the overall image and background
background.
screen brightness.
CONTRAST
BRIGHTNESS
16
32
Press the
but t o n t o a d ju st se t t in g
then press Menu t o r e t u r n t o t h e
P r e ss th e
bu tto n to a d j u s t s e tti n g
t h e n p r e s s M e nu to r e tu r n to th e p r ev i o u s
previous menu.
me nu .
33
With the Main Menu displayed, use the
button to selcet COLOR.
AUDIOVOX
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
800X600
H:53.6KHZ V:84.8HZ
When USER is selected, Color can be manually
adjusted by selecting the following displayed
colors :
Press and r e l e a s e t h e Menu bu t t o n t o
display the COLOR Menu :
Then use the
button to select USER.
AUDIOVOX
AUDIOVOX
RED
GREEN
BLUE
RETURN
9300
7500
6550
USER
RETURN
800X600
H:53.6KHZ V:84.8HZ
800X600
H:53.6KHZ V:84.8HZ
When RED is highlighted, pressing the Menu button will display the following screen :
Use the
and
buttons to adjust setting. Do this for each of the COLORS.
RED
GREEN
BLUE
39
39
39
COLOR - Color temperature
1. 9300 - If you are partial to choose the 9300 setting.
2. 7500 - The 7500 setting is less blue than 9300.
3. 6550 - The color temperature setting is standard.
4. USER - Increases or decreases Red, Green or Blue colors. Change in color will be reflected on
the screen image.
NOTE :
9300, 7500 and 6550 are Preset at the factory.
34
ADV. TUNE
W i t h t h e M ai n M e nu d i sp l aye d , u se
the
Then Press and release the Menu button to
access the following screen ;
but t on t o se l e ct QUA L I T Y.
AUDIOVOX
AUDIOVOX
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
ADV. TUNE
SIZE
FOCUS
TEXT/GFX
SHARPNESS
RETURN
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
800X600
H:53.6KHZ V:84.8HZ
800X600
H:53.6KHZ V:84.8HZ
Adjust the picture FOCUS, SIZE and SHARPNESS.
SIZE
ADV. TUNE
DOING
50
FOCUS
TEXT/GFX
TEXT
8
SHARPNESS
8
QUALITY
1. ADV. TUNE - Automatically adjusts image clarity and stability.
2. SIZE - Adjusts image size relative to the screen.
3. FOCUS - Controls image clarity.
4. TEXT/GFX - Adjusts text sharpness when PC is in DOS mode.
5. SHARPNESS - Adjusts image sharpness relative to the background.
35
GFX
IMAGE POSITION
With the Main Menu displayed, use
the
bu tton to select POSITI ON.
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
Then Pr e ss a n d r e le a se th e Me nu
button to a cce ss th e fo llow in g
scree n :
AUDIOVOX
AUDIOVOX
IMAGE POS.
OSD POS.
SPEED EN.
SPEED ADJ.
RETURN.
800X600
H:53.6KHZ V:84.8HZ
800X600
H:53.6KHZ V:84.8HZ
W ith SPEED EN h ig h lig h te d ,
u se th e Me nu bu tto n to a cce ss
fo llow in g scr e e n :
AUDIOVOX
HORIZONTAL
VERTICAL
CENTER
RETURN
SPEED EN
YES
NO
800X600
H:53.6KHZ V:84.8HZ
W ith SPEED AD J h ig h lig h te d ,
u se th e Me nu bu tto n to a cce ss
fo llow in g scr e e n :
HORIZONTAL
VERTICAL
SPEED ADJ
51
28
3
36
POSITION
1. IMAGE POS.
a. HORIZONTAL - Adjusts the horizontal size by increasing or decreasing this setting.
b. VERTICAL - Adjusts the vertical size by increasing or decreasing this setting.
c. CENTER - Automatic adjusting image to center.
2. OSD POS. You can choose where you would like the OSD control window to appear on your screen.
Selecting OSD location allows you to manually adjust the position of the OSD control menu left, right,
up or down.
You can choose where you would like the OSD control window to appear in the center area on your
screen.
3. SPEED EN.
a. YES
b. NO
4. SPEED ADJ.
SAVE EXIT
EX I T :
Saves your settings then exits main menu
Ch a n ges wi l l not be s aved.
Wit h M ai n M e nu d i sp l aye d , u se
th e
U se t he
but t on t o s e l e ct S AV E E X I T
button to s el ec t EXIT
AUDIOVOX
AUDIOVOX
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
MAIN DISP
SUB DISP
AUTOTUNE
CONTRAST
BRIGHTNESS
AUDIO
COLOR
QUALITY
POSITION
OSD SETUP
RECALL
SAVE EXIT
EXIT
800X600
H:53.6KHZ V:84.8HZ
800X600
H:53.6KHZ V:84.8HZ
T h e n pr e s s and r e l e a se t h e M e nu
T h e n P res s and rel eas e the Menu
bu t t on t o s ave a l l s e t t i n g s a n d exi t
bu t t o n to ex i t the Mai n Menu.
t h e M a i n M enu .
37
Refer ence
Dis pl a y M o d e s
LCD Monit or D isplay Ang le
Vertical : Left 30 /Right 30
Horizontal : Up 30 /Down 5
38
Troubleshooting
Before calling our serviceman, please refer to the following chart to see if you can adjust
the problems yourself.
Trouble
TV will not turn on
Checks and Adjustments
Plug TV in.
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Make sure batteries are placed in the remote the right way.
Unplug TV for a few minutes and then turn it on again.
Poor sound or no sound
Check volume settings and mute settings
Check for possible interference sources
Blur picture or no picture
Check antenna or TV cable
Check for possible outside interferences
Check picture settings
Some channels are not clear
Check outdoor antenna and make necessary adjustments
Check possible outside interferences
Poor Color tone or No color
Check memory settings
Check Color settings
Check if program is in correct channel
Check antenna and cable connections
Check possible outside interferences
No reception from Cable
Check if cable is connected properly
Check if channels are selected properly
Channels above 13 cannot receive
Check if cable company are experiencing technical problems
Check TV channel settings (CATV/TV) are set properly( page 20)
Check antenna and UHF settings
Unable to operate remote
Check for low batteries or possible obstructions between remote and TV sensor
Check TV main power source
TV shut off
Electric power failure
Preset sleep mode features are on
TV programs ended
39
Troubleshooting
Interference
Please note the following common TV reception interferences:
Ignition effect
Black spots or vertical lines may appear. Screen jumps crazily or is very unstable.
This is commonly the result of car ignition system interference, neon lights, or other
forms of electrical interferences.
Ghost Shadows
This is the result of two signals : One being the original signal from the
antenna while the 2nd signal is a slightly delayed signal, normally the result of
bouncing off tall buildings or other obstructions. This problem might be corrected by
adjusting your outdoor antenna.
Flurries
Lots of tiny dots appears on your screen. This is the result of poor reception signals.
You may have to re-enforce your antenna signals.
note: If interferences occur while you are using a cable system, then the problem could be at the
cable source and not from your TV reception.
40
Troubleshooting
You may have problems that can be fixed with a few minor adjustments. Look for the type of
problem you are having below and then apply the suggestions to get your TV going again.
Picture with no sound
Check if you have accidentally pressed the "mute" button
Check other channels if the same problem exist. If other
channels are fine, then problem is with the TV program you
are viewing. This shouldn't be a concern
Verify all connections are firmly attached
Connect cable to another TV
If all checks fail, please contact our serviceman
Sound with no picture
Check if main power is switched on
Check brightness and contrast level to see if they have
been tuned to the minimum level thus making the screen dark
Unplug the cable and re-plug it in after two minutes
Check if you have accidentally pressed the "mute" button
Connect cable to another TV
No Picture No Sound
Check main power source
Check other TV channels. If they are okay , problem is just
with the TV program you are viewing
Press the MENU button on the remote or on the top of
the unit to get into the main display and reselect display option
If you are using outdoor antenna, please check your
connections are firmly attached.
Please check if your power cord is connected properly,
it may be loose
Switch off main power, disconnect cable. Reconnect cable
after two minutes rest then switch on the main power
Check if the antenna or cable are well connected
Check your Remote Control
Check power adapter and power cord if they have been
damaged
Connect cable to another TV
If all fails, please contact with serviceman immediately
41
Troubleshooting
Picture too dark
Check your brightness level
Check your contrast level
In the on screen display (OSD) select RECALL
Check your LCD monitor for possible demage
Remote Control Failure
Check TV main power source
Check if remote control batteries are weak
Check if batteries have been correctly installed
Check if there are obstructions between your remote control
and the main TV remote sensor
Disconnect your cable for two minutes before reinstalling it
If failure resulted from electrical interferences, lighting or
static, disconnect the TV main powerfor 10 seconds before
reinstalling it. Restart your TV
Try holding remote 2 inches from sensor
Picture is blurry
Check other channels. Problem may be an isolated incidence
If using outdoor antenna, please check connections
Please check your accessories. Such as V ideo recorder,
VCR, DVD player.
Check your cable company or outdoor antenna reception
RF signal may be too slow
If all fails, please contact our serviceman immediately
42
Note
Customer Record:
This Model number and serial number of this product can be found on its rear panel.
You should note this serial number in the space provided below and retain this book, plus your
purchase receipt, as a permanent record of your purchase to aid in identification in the event of
theft or loss, and Warranty Service purpose.
Model Number:
FP1520
Serial Number:
Audiovox Electronics Corporation
150 Marcus Blve
Hauppauge, NY 11788
1-800-651-4994
For Customer Service
Visit Our Website At
www.audiovox.com
Product Information, Photos,
FAQ's, Owner's Manuals
43
Product Specifications:
Audiovox Model Number: FP1520
Monitor Display Specifications:
Screen Size
15" (Viewable)
Aspect Ratio
4:3 aspect
Resolution
1024x768
Pixel pitch
0.29mm x 0.29mm
Total Display Colors
16.7 million true color display
Viewing Angle
Contrast Ratio
500:1 (typ)
Brightness (cd/¢T)
450 cd/¢T(typ)
Backlight Lamp Life
50,000 hrs min
Connection Interfaces:
RF (Coax)
S-Video
A/V Input
Headphone Jack
VGA (15 pin D-sub)
Convenience Specifications:
Total Watt output
5Wx2
Number of Speakers
Parental Control with V-Chip
Closed Caption (CC)
181 Channel Cable ready
NTSC Cable Standard
Plug & Play for VGA
Remote Control Type
Model specific
Licensing:
FCC (Part 15)
YES
UL
YES
cUL
YES
Mechanical Dimensions:
W x H x D (W/Stand)
W x H x D (W/o Stand)
20.1" (511mm) x 14.1" (360mm) x 7.1" (182.5mm)
20.1" (511mm) x 12" (305.5mm) x 2.2" (58mm)
Weight (W/o Power transformer)
11.4LB
Power usage:
AC Power Source
110 - 240V ~1.8A, 50 -60Hz
Power Input
DC12V 3.0A 36W
44
90 DAY LIMITED WARRANTY
Applies to Audiovox V ideo Products
AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this
product that should this product or any part thereof, under normal use and conditions, be proven defective in
material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or
replaced with reconditioned product ( at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the term of this Warranty, the products is to be delivered with proof of
warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the
address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna
problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs,
speakers, accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company , has suffered or
been damaged through alteration, improper installation, mishanding, misuse, neglect, accident, or by removal or
defacement of the factory serial number / bar code lable(s). THE EXTENT OF THE COMPANY'S LIABILITY
UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT , SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR
THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION FOR BREACHY OF ANY WARRANTY HEREUNDER INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM
DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company
any liability other thatn expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of llimitation
of incidental or consequential damage so the above limitation or exclusions may not apply to you. This Warranty
gives you specific legal rights and you may also have other rights which vary from state to state.
U.S.A.: AUDIOVOX ELECTRONICS CORPORA TION, 150 MARCUS BLVD.,HAUPPAUGE, NEW YORK 1 1788
1-800-645-4994
CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5556D