Mitsubishi Electric PUY-A42NHA5-BS Specifications

Submittal
Transmittal
TO: David L Wallace & Assoc. CPA
542 Douglas Avenue
Dunedin, FL 34698
We are sending you the following:  Attached
 1st Class Mail  Overnight
Via:
Copies
1
Spec No.
M3.0.0
Date: 11/13/2014
Project # 714 - Home2 Suites - G'ville
Submittal # S714-08
ATTN: Peter Gray
RE: 10A & 10B
 Under Separate Cover
 Facsimile
 Pick-Up/Hand Deliver
Description
10A & 10B Split System
Remarks: Mitsubishi Mini-Splits were qouted as supplier of mechanical units does not rep. Daikin. Although most
other items are based on performanced based equals the owner mentioned the desire to use Daikin specifically.
Feasterco will confirm if there is any concern with Mitsubishi.
Received By: _________________________________ Date: ________________________
Signed: _______________________________
Title: _________________________________
Copy to: ___________________
 Recipient’s Copy
 Sign & Return
 File Copy
1000 SW 33 Avenue, Suite 301 ∙ Ocala, FL 34474 ∙ Office: 352.351.1976 ∙ Fax: 352.622.4800
rd
............................
1622 Hickman Road
Jacksonville, FL 32216
(904)807-9899 phone (904)483-3005 fax
SUBMITTAL FOR:
Plans dated 9/5/14
PROJECT:
Home2Suites by Hilton
CONTRACTOR:
ComfortTemp
ENGINEER:
Delta G Consulting
PRODUCT:
Air Conditioner
MANUFACTURER:
Mitsubishi (M & P-Series)
SPEC SECTION:
NA
FEASTERCO CONSTRUCTION, INC. – SHOP DRAWINGS
SUBMITTED BY:
Nelson & Company
1622 Hickman Road
Jacksonville, FL 32216
George Sadens
CHECKED FOR GENERAL CONFORMANCE WITH THE DESIGN
CONCEPT, CONSTRUCTION, SIZE AND CONFORMITY TO THE
CONTRACT DOCUMENTS. SUBCONTRACTOR SHALL VERIFY ALL
DETAILS SUCH AS DIMENSIONS, QUANTITIES AND CAPACITIES.
ANY ACTION SHOWN IS SUBJECT TO THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS AND DOES NOT RELIEVE THE
SUBCONTRACTOR FROM COMPLIANCE WITH THE DOCUMENTS.
_____NO EXCEPTIONS TAKEN
_____REVISE AND RESUBMIT
X
_____APPROVED
AS NOTED
_____REJECTED
BY:
SUBMITTAL DATE:
October 8, 2014
Tom Files
DATE: 11/14/14
TABLE OF CONTENTS
SECTION 1
CLARIFICATIONS
3
SECTION 2
EQUIPMENT SCHEDULE
5
SECTION 3
UNIT DATA
7
SECTION 4
CONTROLS AND ACCESSORIES
18
A. WALL MOUNTED WIRED CONTROLLER
B. DRAIN PAN LEVEL SENSOR
C. LOW AMBIENT WIND BAFFLE
SECTION 5
WIRING INFORMATION
28
SECTION 6:
WARRANTY
33
SECTION 7
I, O, & M MANUALS
36
Page 2 of 36
SECTION 1
CLARIFICATIONS
Page 3 of 36
CLARIFICATIONS
1)
AHU/CU-10/10A & 10B: Heat Pump Multi Zone (Model: SLZ-KA09/MXZ-20BNNA)
AHU/CU-11: Straight Cool (Model: PKA-A18NHA/PUY-A18NHA4)
2)
Unit Voltage= 208/1/60 (SEE SECTION 3: UNIT DATA).
3)
Refrigerant = R410A (SEE SECTION 3: UNIT DATA).
4)
SLZ-KA09 indoor units have internal condensate lift mechanism & float switch (SEE SECTION 3:
UNIT DATA).
5)
Wall mounted wired controller (SEE SECTION 4: CONTROLS & ACCESSORIES).
6)
Drain pan level sensor provided for PKA-18 (SEE SECTION 4: CONTROLS & ACCESSORIES).
7)
Low ambient wind baffle for PUY-18 outdoor unit only, low ambient is not available for
MXZ-2B20NA (SEE SECTION 4: CONTROLS & ACCESSORIES).
8)
Warranty: Entire unit (parts) = 5 years, 7 years compressor (SEE SECTION 6: WARRANTY).
9)
Disconnects provided by others.
10)
Coil coatings have been deleted for VE.
Page 4 of 36
SECTION 2
EQUIPMENT SCHEDULE
Page 5 of 36
1622 Hickman Road Jacksonville, FL 32216 PH 904.807.9899 FAX 904.483.3005
Home2Suites by Hilton
Tag
Model
Location
CU-10
AHU-10A
AHU-10B
CU/AHU-11
MXZ-2B20NA1
SLZ-KA09NA
SLZ-KA09NA
PUY-A18NHA/PKA-A18HA4
POOL RESTROOM
POOL RESTROOM
POOL RESTROOM
PBX ROOM
Page 6 of 36
SECTION 3
UNIT DATA
Page 7 of 36
M-SERIES
SUBMITTAL DATA: MXZ-2B20NA-1
MULTI-INDOOR INVERTER HEAT-PUMP SYSTEM
Job Name: Home2Suites by Hilton
Location:
Purchaser:
Engineer:
Submitted to:
For
System Designation:
Schedule No.:
Date: 10/8/2014
Reference
■
Approval
Construction
TAG: CU-10
GENERAL FEATURES
• Compact side discharge outdoor unit
• Wireless or wired remote controller, indoor unit dependent
• Quiet operation
• Automatic fan speed control
• Auto restart following power outage
• Self-check function—integrated diagnostics
• Advanced microprocessor control
• Limited warranty: five years parts and seven years compressors
ACCESSORIES
□□ Air Outlet Guide (MAC-856SG)
□□ 3/8" x 1/2" Port Adapter
(MAC-A454JP; for use with 15,000 Btu/h Indoor units)
Cooling*
(Non-ducted/Ducted)
Heating at 47°F*
(Non-ducted/Ducted)
Heating at 17°F*
(Non-ducted/Ducted)
Electrical Requirements
Voltage
Outdoor Unit: MXZ-2B20NA-1
Specifications
Unit Type
Rated Capacity
Btu/h
Model Name
MXZ-2B20NA-1
18,000 / 20,000
Maximum Capacity
Btu/h
20,000 / 20,000
Total Input
W
Rated Capacity
Btu/h
22,000 / 22,000
Maximum Capacity
Btu/h
25,500 / 25,500
Total Input
W
Rated Capacity
Btu/h
Total Input
W
Voltage,
Phase, Hertz
A
A
V
V
Power Supply
Recommended Fuse/Breaker Size
MCA
Indoor - Outdoor S1-S2
Indoor - Outdoor S2-S3
Compressor
Blower Motor (ECM)
Cooling
Sound Pressure Level
(Non-ducted/Ducted)
Heating
External Dimensions (H x W x D)
Net Weight
External Finish
Refrigerant Pipe Size O.D. ― Liquid (High Pressure)
Four Ports
Gas (Low Pressure)
Max. Refrigerant Line Length
Max. Piping Length for Each Indoor Unit
Max. Refrigerant Pipe Height If Indoor Unit is Above Outdoor Unit
Difference
If Indoor Unit is Below Outdoor Unit
Connection Method
Refrigerant
F.L.A.
dB(A)
In. / mm
Lbs. / kg
(In. / mm)
Ft.
Ft.
Ft.
1,440 / 2,190
1,650 / 1,780
12,500 / 12,500
1,350 / 1,430
208 / 230V, 1-Phase, 60 Hz
20
15
AC 208 / 230
DC ±24
DC Inverter-driven Twin Rotary
0.96
49
51
27-15/16 x 33-1/16 x 13 / 710 x 840 x 330
130 (59)
Munsell No. 3Y 7.8 / 1.1
1/4 / 6.35
A,B: 3/8 / 9.52
164
82
49
33
Flared
R410A
(For data on specific indoor units, see the MXZ-B Technical and Service Manual.)
* Rating Conditions per AHRI Standard:
Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB
Cooling | Outdoor: 95º F (35º C) DB / 75º F (24º C) WB
Heating at 47ºF | Indoor: 70º F (21º C) DB / 60º F (16º C) WB
Heating at 47ºF | Outdoor: 47º F (8º C) DB / 43º F (6º C) WB
Heating at 17º F | Indoor: 70º F (21º C) DB / 60º F (16º C) WB
Heating at 17º F | Outdoor: 17º F (-8º C) DB / 15º F (-9º C) WB
Specifications are subject to change without notice.
© 2013 Mitsubishi Electric US, Inc.
Page 8 of 36
SPECIFICATIONS: MXZ-2B20NA-1, contd.
Operating Range:
Cooling
Heating
Maximum
Minimum
Maximum
Minimum
Energy Efficiencies:
Indoor Intake Air
Temp.
95º F (35º C) DB
71º F (22º C) WB
67º F (19º C) DB
57º F (14º C) WB
80º F (27º C) DB
67º F (19º C) WB
70º F (21º C) DB
60º F (16º C) WB
Outdoor Intake Air
Temp.
Indoor Unit Type
115º F (46º C) DB
14º F (-10º C) DB
75º F (24º C) DB
65º F (18º C) WB
6º F (-14º C) DB
5º F (-15º C) WB
SEER
EER
HSPF
COP @
47°F
COP
@ 17°F
Non-ducted
(09 + 09)
18.0
12.5
8.9
3.9
2.71
Ducted and
Non-ducted
16.75
10.8
8.7
3.77
2.64
Ducted
(09 + 12)
15.5
9.10
8.5
3.62
2.56
Multi-zone Indoor/Outdoor Combination Table
MXZ-2B20NA-1
MSZ-FE*
MSZ-GE*
MFZ*
SEZ*
SLZ*
PCA
(A24)*
PLA (A12/18/24)*
PEAD (A24)*
OK
06/09/12/15 OK
18, 24 NO
09/12 OK
18 NO
09/12/15 OK
18 NO
OK
NO
NO
NO
* Refer to indoor unit submittal.
Notes:
• Minimum of two Indoor Units must be connected to the MXZ-2B20NA-1.
• Minimum installed capacity cannot be less than 12,000 Btu/h.
• There are NO indoor units larger than 24,000 Btu/h that can be connected to MXZ Systems.
• PLA-A12BA can NOT be connected with MXZ-2B20NA-1/MXZ-3B24NA-1/MXZ-3B30NA-1/MXZ-4B36NA-1.
• System can operate with only one Indoor Unit turned on. (see Operation Performance Table next page for single Indoor Unit
performance).
• May connect to any style indoor unit or combination.
• Information provided at 208/230V. Refer to the MXZ Outdoor Unit Service Manual for detailed specifications and additional information
per Indoor Unit Combination.
Notes:
Specifications are subject to change without notice.
© 2013 Mitsubishi Electric US, Inc.
Page 9 of 36
MXZ-2B20NA-1 OPERATION PERFORMANCE
Operation Performance for Indoor Unit
Combinations (Unit A + Unit B)
6
9
12
15
6+6
6+9
6 + 12
6 + 15
9+9
9 + 12
9 + 15
12 + 12
Unit A
6,000
7,400
9,000
10,900 - 11,000
12,000
13,600
15,000
18,000
6,000
7,400
6,000
7,400
6,000
7,400
5,800
6,400
9,000
10,900 - 11,000
8,500
9,500
7,500
8,250
10,000
11,000
Cooling Capacity Range (Btu/h)
Heating Capacity Range (Btu/h)
Unit B
6,000
7,400
9,000
10,900 - 11,000
12,000
13,600
14,200
15,600
9,000
10,900 - 11,000
11,500
12,500
12,500
13,750
10,000
11,000
Power Usage Range (W)
Total Range
5,400 - 9,000
5,200 - 14,400
5,400 - 9,000
5,200 - 15,400
5,400 - 12,000
5,200 - 16,400
5,400 - 15,000
5,200 - 21,100
7,800 - 15,000
8,500 - 25, 500
7,800 - 18,000
8,500 - 25,500
7,800 - 20,000
8,500 - 25,500
7,800 - 23,000
8,500 - 25,500
7,800 - 20,000
8,500 - 25,500
7,800 - 23,000
8,500 - 25,500
7,800 - 23,000
8,500 - 25,500
7,800 - 23,000
8,500 - 25,500
490 - 680
480 - 1,400
490 - 750
480 - 1,430
490 - 1,010
480 - 1,460
490 - 1,560
480 - 2,100
510 - 1,820
520 - 2,410
630 - 1,820
520 - 2,520
630 - 1,820
520 - 2,520
630 - 2,230
520 - 2,520
630 - 1,820
520 - 2,620
630 - 2,230
520 - 2,620
630 - 2,230
520 - 2,620
630 - 2,230
520 - 2,620
Specifications are subject to change without notice.
© 2013 Mitsubishi Electric US, Inc.
Page 10 of 36
DIMENSIONS: MXZ-2B20NA-1
FORM# MXZ-2B20NA-1 for Multiple Indoor Unit Styles - 201311
1340 Satellite Boulevard
Suwanee, GA 30024
Tele: 678-376-2900 • Fax: 800-889-9904
Toll Free: 800-433-4822
www.mehvac.com
Specifications are subject to change without notice.
© 2013 Mitsubishi Electric US, Inc.
Page 11 of 36
SUBMITTAL DATA: SLZ-KA09NA
M-SERIES
9,000 BTU/H CEILING-CASSETTE INDOOR UNIT FOR MXZ MULTI-ZONE HEAT-PUMP SYSTEMS
Job Name: Home2Suites by Hilton
System Reference:
Date: 10/8/2014
TAG: AHU-10A & 10B
SPECIFICATIONS
Cooling Capacity* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,400 Btu/h
Heating Capacity at 47°F* . . . . . . . . . . . . . . . . . . . . . 10,900 Btu/h
SLZ-KA09NA
GENERAL FEATURES
• Four-way 2'x2' ceiling-cassette indoor unit for ceiling recessed
applications
• Built-in drain mechanism for condensate removal; lifts to
19-11/16"
• Wide air-flow pattern for better air distribution
• Design features ventilation air intake knockout
• Long-life air filter included with indoor unit
• Indoor unit powered from outdoor unit using A-Control
• Choice of fan speed: Low, Medium, High
• Automatic restart following a power outage
• Limited warranty: five years parts and seven years compressors
ACCESSORIES
Indoor Unit
□□ Grille (SLP-15AAUW; required - shipped with unit)
Controller Options
□□ Wireless Wall-mounted Remote Controller Kit (MHK1)*
□□ Portable Central Controller (MCCH1)*
□□ Outdoor Air Sensor (MOS1)*
□□ Wired Wall-mounted Controller (PAR-31MAA)*
□□ Simple MA Remote Controller (PAC-YT53CRAU)*
*See Submittal for information on each option.
□□ Remote Temperature Sensor (M21-JKO-307)
□□ Hand-held Wireless Remote Controller
(PAR-FL32MA;req.PAR-FA32MA-E)
□□ Wireless Signal Receiver PAR-FA32MA (for PAR-FL32MA)
□□ Lockdown Bracket for Hand-held Controller (RCMKP1CB)
* Rating Conditions per AHRI Standard
Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB
Cooling | Outdoor: 95º F (35º C) DB / 75º F (24º C) WB
Heating at 47ºF | Indoor: 70º F (21º C) DB / 60º F (16º C) WB
Heating at 47ºF | Outdoor: 47º F (8º C) DB / 43º F (6º C) WB
(For data on specific indoor units [all ducted, all non-ducted,
and both ducted and non-ducted] combinations, see the MXZ
Technical and Service Manual.)
Electrical Requirements
Power Supply . . . . . . . . . . . . . . . . . . . 208 / 230V, 1-Phase, 60 Hz
MCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A
Voltage
Indoor - Outdoor S1-S2 . . . . . . . . . . . . . . . . . . . . . . . AC 208 / 230V
Indoor - Outdoor S2-S3 . . . . . . . . . . . . . . . . . . . . . . . . . . . DC ±24V
Fan Motor (ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.23 F.L.A.
Airflow (Lo - Med - Hi) . . . . . . . . . . . . . . . . . . 280 - 320 - 350 Dry CFM
250 - 290 - 320 Wet CFM
Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene Honeycomb
Sound Pressure Level (Lo - Med - Hi) . . . . . . . . . 29 - 32 - 38 dB(A)
DIMENSIONS
W
D
H
UNIT INCHES / MM
22-7/16 / 570
22-7/16 / 570
9-1/4 / 235
GRILLE INCHES / MM
25-5/8 / 650
25-5/8 / 650
13/16 / 20
Weight (Unit/Grille)
Lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 / 7
kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 / 3
External Finish (Unit/Grille) . . . . . . . . . . Galvanized-steel Sheets /
Munsell 6.4Y 8.9 / 0.4
Field Drainpipe Size O.D. . . . . . . . . . . . . . . . . . . . . . 1-1/4” / 32 mm
Refrigerant Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R410A
Refrigerant Pipe Size O.D.
Gas Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" / 9.52 mm
Liquid Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" / 6.35 mm
Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flared
Specifications are subject to change without notice.
© 2014 Mitsubishi Electric US, Inc.
Page 12 of 36
DIMENSIONS: SLZ-KA09NA
Detail drawing of fresh air intake
Ceiling hole
Fresh air
intake
12
1-7/32(31)
3-7/16(87)
2-7/32(56)
19/32~1-15/32(15~37)
22-11/16~24-13/32(576~620) Ceiling hole
Grille
Ceiling surface
1-1/16
Terminal block
+3/16 (27 +5)
0
0
25/32(20)
7-19/32(193)
Refrigerant
pipe (liquid)
Wiring entry
7-5/32(182)
Drain pipe
VP-25 connection
(O.D. 1-1/4( 32))
Suspension bolt M10 or W3/8
9-1/16(230)
1-7/8(48)
7-15/16(202)
8-3/16(208)
Refrigerant 21/32(17)
pipe (gas)
9-1/4(235)
2-1/14(57)
Ceiling surface
7-27/32(199)
13-27/32(352)
13-3/16(335)
1-1/2~2-9/32(38~58)
Suspension bolt
lower edge
2-19/32(66)
2-7/8( 73.4)
Cut out hole
0
22-7/16(570)
3-21/32(93)
25-19/32(650)
11-27/32(301)
Air outlet hole
1-3/8(35)
4-3/4(121)
22-7/16(570)
13-3/16(335)
22-11/16~24-13/32(576~620)
16-17/32(420)
Suspension bolt pitch
Suspension bolt pitch
19/32~1-15/32(15~37)
Refrigerent pipe
(liquid)
Refrigerent pipe
(gas)
SLZ-KA09NA
1/4 inch
( 6.35mm)
flared connection
3/8 inch
( 9.52mm)
flared connection
SLZ-KA12NA
1/4 inch
( 6.35mm)
flared connection
3/8 inch
( 9.52mm)
flared connection
SLZ-KA15NA
1/4 inch
( 6.35mm)
flared connection
1/2 inch
( 12.7mm)
flared connection
Models
Brand label
2-5/32(55)
Grille
V/M
Drain hole
V/M
Auto vane
14-27/32(377)
Air intake hole
11-27/32(301)
Air outlet hole
25-19/32(650)
1(25)
3- 1/8( 2.8)
Burring hole
20-7/8(530)
120
19/32~1-15/32(15~37)
3-15/16( 100)
4-21/32(118)
19/32~1-15/32(15~37)
Unit : inch (mm)
V/M
V/M
Air intake grille
Vane motor
14-27/32(377)
Air intake hole
1-3/8(35)
2-5/32(55)
1340 Satellite Boulevard
Suwanee, GA 30024
Toll Free: 800-433-4822
www.mehvac.com
FORM# SLZ-KA09NA for MXZ MULTI-ZONE SYSTEMS - 201409
Specifications are subject to change without notice.
© 2014 Mitsubishi Electric US, Inc.
Page 13 of 36
P-SERIES
SUBMITTAL DATA: PKA-A18HA4 & PUY-A18NHA4 (-BS)
18,000 BTU/H WALL-MOUNTED AIR-CONDITIONING SYSTEM
Job Name: Home2Suites by Hilton
System Reference:
Date: 10/8/2014
TAG: CU/AHU-11
Indoor Unit: PKA-A18HA4
Outdoor Unit: PUY-A18NHA4 (-BS)
GENERAL FEATURES
• Wall-mounted indoor unit for residential and commercial
applications
• Shiny-white–exterior plastic; compact design
• Quiet operation—both indoor and outdoor units
• Self-check function—integrated diagnostics
• Limited warranty: five years parts and seven years compressors
UNIT OPTION
□□ Standard Model……………..........…….................PUY-A18NHA4
□□ Sea Coast (BS) Model…….…………………..PUY-A18NHA4-BS
ACCESSORIES
SEACOAST PROTECTION
• External Outer Panel:
- Phosphate coating + Acrylic-Enamel coating
• Fan Motor Support:
- Epoxy resin coating (at edge face)
• Separator Assembly ; Valve Bed:
- Epoxy resin coating (at edge face)
• Screws (used outer side):
- Zinc nickel coating 5μm + Polyvinylidene chloride coating
“Blue Fin” treatment is an anti-corrosion treatment that is
applied to the condenser coil to protect it against airborne
contaminants..
Indoor Unit
□□ Condensate Pump (BlueDiamond X87-711/721; 115/230V)
□□ Condensate Pump (Sauermann SI30-115/230; 115/230V)
Outdoor Unit
□□ Drain Pan (PAC-SG63DP)
□□ Drain Socket (PAC-SH71DS)
□□ Three-pole Disconnect Switch (TAZ-MS303)
□□ Wind Baffle (WB-PA1)
□□ Air Outlet Guide (PAC-SG58SG)
□□ Mounting Base (DSD-400N)
□□ Mounting Pad (ULTRILITE2)
□□ Wall-mounting Brackets (CWMB1)
Controller Options
□□ Wireless Wall-mounted Remote Controller Kit (MHK1)**
□□ Portable Central Controller (MCCH1)**
□□ Outdoor Air Sensor (MOS1)**
□□ Wired Wall-mounted Controller (PAR-31MAA)**
□□ Simple MA Remote Controller (PAC-YT53CRAU)**
**See Submittal for information on each option.
□□ M-NET Adapter (PAC-SF83MA)
□□ CN51 Connector for Multiple Remote Controller Adapters
Duct Fan Controller (PAC-725AD)
□□ CN32 Connector for Remote On/Off (PAC-715AD)
□□ Remote Temperature Sensor (PAC-SE41TS)
□□ Remote Operation Adapter - Display and On/Off (PAC-SF40RM)
□□ Hand-held Wireless Remote Controller
(PAR-FL32MA; Receiver Built-in)
□□ Lockdown Bracket for Hand-held Controller (RCMKP1CB)
□□ Control/Service Tool (PAC-SK52ST)
Specifications are subject to change without notice.
© 2014 Mitsubishi Electric US, Inc.
Page 14 of 36
SPECIFICATIONS:
PCA-A24KA4
& PUY-A24NHA4
SPECIFICATIONS:
PKA-A18HA4
& PUY-A18NHA4
(-BS)
Cooling*
Rated Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18,000 Btu/h
Minimum Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,000 Btu/h
SEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15.3 Btu/h/W
EER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 Btu/h/W
Total Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,240 W
* Rating Conditions per AHRI Standard
Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB
Cooling | Outdoor: 95º F (35º C) DB / 75º F (24º C) WB
Electrical Requirements
Power Supply . . . . . . . . . . . . . . . . . . . 208 / 230V, 1-Phase, 60 Hz
Recommended Fuse/Breaker Size . . . . . . . . . . . . . . . . . . . . . .15 A
Voltage
Indoor - Outdoor S1-S2 . . . . . . . . . . . . . . . . . . . . . . . AC 208 / 230V
Indoor - Outdoor S2-S3 . . . . . . . . . . . . . . . . . . . . . . . . . . . DC ±24V
OPERATING RANGE
Cooling
Maximum
Minimum
Indoor Intake Air
Temp.
95º F (35º C) DB
71º F (22º C) WB
67º F (19º C) DB
57º F (14º C) WB
Outdoor Intake Air
Temp.
115º F (46º C) DB
0º F** (-18º C) DB
** With optional wind baffle accessory installed. If not installed,
the minimum temperature will be 23º F (-5º C) DB.
Indoor Unit
MCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A
Blower Motor (ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.33 F.L.A.
Blower Motor Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 W
Airflow (Lo - Mid - Hi) . . . . . . . . . . . . . . . . 320 - 370 - 425 Dry CFM
290 - 335 - 380 Wet CFM
Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene Honeycomb
Sound Pressure Level (Lo - Mid - Hi) . . . . . . . . . . . . . . . . . . . 36 - 40 - 43 dB(A)
SHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.68
Moisture Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 pt./h
DIMENSIONS
W
D
H
UNIT INCHES / MM
35-3/8 / 898
9-13/16 / 249
11-5/8 / 295
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 lbs. / 13 kg
External Finish . . . . . . . . . . . . . . . . . . . . . Munsell No. 1.0Y 9.2 / 0.2
Field Drainpipe Size O.D. . . . . . . . . . . . . . . . . . . . . . . 5/8" / 16 mm
Outdoor Unit
Compressor . . . . . . . . . . . . . . . . . . . DC Inverter-driven Twin Rotary
MCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 A
MOCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 A
Fan Motor (ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.35 F.L.A.
Sound Pressure Level
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 dB(A)
DIMENSIONS
W
D
H
INCHES / MM
31-1/2 / 800
11-13/16 + 7/8 / 300 + 23
23-5/8 / 600
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 lbs. / 40 kg
External Finish . . . . . . . . . . . . . . . . . . . . . . Munsell No. 3Y 7.8 / 1.1
Refrigerant Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R410A
Refrigerant Pipe Size O.D.
Gas Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" / 12.7 mm
Liquid Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" / 6.35 mm
Max. Refrigerant Pipe Length . . . . . . . . . . . . . . . . . . . . 100' / 30 m
Max. Refrigerant Pipe Height Difference . . . . . . . . . . . 100' / 30 m
Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flared
Notes:
Specifications are subject to change without notice.
© 2014 Mitsubishi Electric US, Inc.
Page 15 of 36
DIMENSIONS: PKA-A18HA4 (-BS)
Specifications are subject to change without notice.
© 2014 Mitsubishi Electric US, Inc.
Page 16 of 36
DIMENSIONS: PUY-A18NHA4 (-BS)
Clearance space around the outdoor unit
1340 Satellite Boulevard
Suwanee, GA 30024
Toll Free: 800-433-4822
www.mehvac.com
FORM# PKA-A18HA4 - PUY-A18NHA4 (-BS) - 20140624
Specifications are subject to change without notice.
© 2014 Mitsubishi Electric US, Inc.
Page 17 of 36
SECTION 4
CONTROLS & ACCESSORIES
A. Wall Mounted Wired Controller
B. Drain Pan Level Sensor
C. Low Ambient Wind Baffle
Page 18 of 36
SECTION 4A
A. Wall Mounted Wired Controller
Page 19 of 36
M- and P-SERIE
Model:
Model:
Job Name:
Purchaser:
Job Name:
Submitted
to:
Purchaser:
2.Submitted
Local
remote
to:
System
Designation:
PAR-31MAA
M- and
PAR-31MAA
Location:
Date:
Engineer:
Location:
controller
For
Engineer:
P-SERIES
Date:
Reference
For Schedule
Reference
No.:
Approval
Approval
Constructio
Construction
System
2-1.
MA Designation:
remote controller [PAR-31MAA] Schedule No.:
Controller
2. Local remote controller
QTY=3
BACKLIT MA REMOTE CONTROLLER (PAR-31MAA)
BACKLIT
MA REMOTE CONTROLLER (PAR-31MAA)
SPECIFICATIONS
:N
:Each group
2. Schedule and timer setting
SPECIFICATIONS
• Controls group operation for up to 16 indoor units in a single grou
Setting
• Controls
group Item
operation
for up
to 16 indoorDescription
units in
a single group
• Features
selectable
multi-lingual
LCD
(English,
Spanish, and
Timer
ON/OFF timer
• Features selectable
multi-lingual
LCD (English, Spanish, and
French)
Turns ON and OFF daily at a set time.
French)
• Time can beand
5-minute increments.
• Supports
both Fahrenheit
• Supports
both Fahrenheit
and
Celsiusset inCelsius
• It is also possible to set the ON time only or the OFF time only.
Room
• User
functions
allow
user
to
set
• User
functions
allow user
to
set
Auto-OFF timer
Set temp.
Cool
Auto
Turns off the unit after a certain period of operation.
- On/Off
- On/Off
• Operation
time can be set to a value from 30 to 240 minutes in
- Operation
modes modes
cool, heat,
dry, heat,
fan
- Operation
cool,
dry, fan
10-minute
increments.
- Set temperature
Set
temperature
Mode
Temp.
Fan
- Fan speed
setting
Weekly timer
Weekly ON/OFF times and set temperatures can be set.
- Fan
speed setting
• Time can be set in 5-minute increments. Up to 8 schedule
- Airflow
direction
Airflow direction patterns can be set per day of the week.
• Timer- Operation:
* Not valid when the ON/OFF timer is set.
• Timer
Operation:
- Weekly
Timer:
On/Off/Temperature
setting up to 8 times per day of Night
setback
The
temperature range and the start/stop
the week
in
1-minute
increments
- Weekly Timer: On/Off/Temperature
settingtimes
up can
to be
8 set.
times per day
- Simple
and Off time
can be set once within 72-hour
theTimer:
weekOn
in 1-minute
increments
period in 1-hour increments
- Simple
Timer:
On and
Off time can be set once within 72-hour
Restriction
- Auto-off 3.
Timer:
Turns indoorsettings
unit Off based on countdown time up :Each group :N
period
inItem
1-hourincrements
increments
to 4-hours
in 30-minute
Description
Setting
Auto-off
Timer:
Turns
indoor
unit
Offsensed
basedbyeither
on
countdown
time u
• Room- Temperature:
Displays
room
temperature
the
The following
operation
can be prohibited
makingatcertain
Allows/disallows
indoortounit
(default)
at settings
the remote
controller
4-hours
inor30-minute
on increments
the centralized
controller: ON/OFF, operation mode
local
operation
Functions
setting, From
temperature
filter
sign reset. the
• Set•Temperature
Range Limit:
the setting,
Backlitand
MA
Controller,
Room Temperature:
Displays
room
temperature
sensed either at
* While an operation is prohibited, the operation icon lights up
allowable
set unit
temperature
range
can
beremote
reducedcontroller
for cool and heat
:Not available
:Each group
1. Operation/Display
indoor
(default)
or
at
the
(only on the Main display in the "Full" mode).
modes
Item
Description
Setting Display • Set Temperature Range Limit: From the Backlit MA Controller, the
• Special Function
P-Series)
OperationRotation/Backup
lock
The following(Lead/Lag
operation can for
be prohibited
respectively: ON/OFF,
ON/OFF
Switches between ON and OFF.
set temperature
can be setting,
reduced
for direction
cool and hea
operation
moderange
setting, temperature
and airflow
• Staticallowable
pressure setting
(model
dependent)
modes
• Fan speed
setting for usesetting.
with supplemental heating function
Operation mode
Switches among Cool/Dry/Fan/Auto/Heat.
switching
(model
dependent)
• Special
FunctionThe
Rotation/Backup
formode
P-Series)
room temperature range(Lead/Lag
for each operation
can be
Temperature
restricted.
• Set•P-Series
twinning
function
restriction
The temperature can be set within the following range.
SEZrange
Static
Pressure
Setting
Room temp.
• Function
Lock Out: Prohibits
all functions
or all functions except
Cool/Dry : 19°C - 30°C (14°C - 30°C) / 67°F - 87°F (57°F - 87°F)
setting *3
• Supplemental
heat
The function
units operate enable/disable
at the preset temperature after a designated
Auto return
Heat
: 17°C - 28°C (17°C - 28°C) / 63°F - 83°F (63°F - 83°F)
On/Off from
the backlit MA
controller
period.
• Set P-Series
twinning
function
Auto
: 19°C - 28°C (17°C - 28°C) / 67°F - 83°F (63°F - 83°F)
• Addressing:
No addressing
required
(Time
can be set to a value from 30 to 120 in 10-minute
( ) For PEFY/PFFY by setting DipSW 7-1 to ON and limits to NI6H fan speed only.
• Function
Prohibits
all functions
or all functions
except
increments.)
• Wiring:
connectsLock
usingOut:
two-wire,
stranded,
non-polar control
wire to
Changes fan speed.
* Not valid
when
the temperature
range is restricted.
Fan speed
from theterminal
backlit
controller
indoorOn/Off
unit connection
orMA
control
adapter setting
(MAC-333IF
for
* Available fan speeds vary depending on the model.
setting
M-Series)
requires
wiringpassword
forrequired
indoor
unitfor
grouping
• Addressing:
No addressing
Administrator
(required
schedule setting etc.) and
password crossover
password
for test run
and function setting
Air flow direction Changes airflow direction.
• Dimensions:
x 3/4 xMaintenance
4-3/4" two-wire,
(120
x 19 (required
x stranded,
120 mm)
• Wiring:4-3/4
connects
using
non-polar
control wire
Fri
setting
* Available airflow directions vary depending on the model.
Louver setting
Switches between louver ON/OFF.
Notes:
Ventilation
equipment
control
Auto descending
panel *1
Notes:
backlight
Interlocked setting and interlocked operation setting with the
City Multi LOSSNAY units can be made.
The Stop/Low/High settings of the ventilation equipment can
be controlled.
Raises and lowers the automatic elevating panel.
Pressing any button turns the backlight on and it will stay lit
for a certain period of time depending on the screen.
Main display
mode setting
The Main display can be displayed in two different modes:
"Full" and "Basic."
Clock *2
Date (year/month/day) and time (hour/minute) can be set.
The set time as well as the day of the week will be displayed
on the Main display.
It is also possible to set not to display the time on the Main display.
Clock display
The clock can be displayed in 12-hour format (AM/PM before
or after the time) and 24-hour format.
Room temp.
display *3
Displays the room temperature on the Main display in the
"Full" mode during operation.
When an error occurs, an error code and the unit address
appear.
Air conditioning unit model, serial number, and contact
Specifications arenumber
subjectcan
to be
change
withoutwhen
notice.
set to appear
an error occurs. (The
above
© 2013 Mitsubishiinformation
Electric US,
Inc.needs to be entered in advance.)
* An error code may not appear depending on the error.
Error information
Filter information
A filter sign will appear when it is time to clean the filter.
etc.) can be set.
indoor unit connection terminal or control adapter (MAC-333IF fo
M-Series)
requires crossover
wiring for indoor unit grouping
:N
:Each group
4. Miscellaneous
items
• Dimensions: 4-3/4 x 3/4 x 4-3/4" (120 x 19 x 120 mm)
Item
Language
Selection
Description
Setting
Select the display language from the following 8 languages.
English, French, German, Spanish, Italian,Portuguese, Swedish,
and Russian
Contrast
Adjusts LCD contrast.
Manual
vane Angle *1
Fixes the vane position for each air outlet.
Service *1
Contains Test run, Function setting, Refrigerant volume check,
Refrigerant leak check, Smooth maintenance, Request code, and
Error history.
*1 This function is active only for the units that support the function.
*2 The clock is accurate within 50 seconds per month (at the temperature of 25ºC [77°F]). The clo
backed up for 7 days.
*3 Temperature will be displayed either in Centigrade in 0.5- or 1-degree increments, or in Fahren
depending on the indoor unit model and the display mode setting on the remote controller.
System example
Page 20 of 36
12
Model:
PAR-31MAA - DIMENSIONS
Unit:mm[in.]
(Rear view)
46 [1-13/16]
46 [1-13/16]
83.5 [3- 9 /32 ]
(Rear view)
19 [ 3/4 ]
83.5 [3- 9 /32 ]
(Side view)
120 [4- 3/4 ]
120 [4- 3/4 ]
(Front view)
1340 Satellite Boulevard
FORM# PAR-31MAA - 201309
Specifications are subject to change without notice.
© 2013 Mitsubishi Electric US, Inc.
Suwanee, GA 30024
Tele: 678-376-2900 • Fax: 800-889-9904
Toll Free: 800-433-4822
www.mehvac.com
Page 21 of 36
SECTION 4B
B. Drain Pan Level Sensor
Page 22 of 36
SUBMITTAL DATA: DPLS1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DRAIN PANEL LEVEL SENSOR / LEVEL CONTROL
Job Name: Home2Suites by Hilton
Location:
Purchaser:
Engineer:
Submitted to:
For
System Designation:
Schedule No.:
QTY=1
GENERAL FEATURES
Reference
Date: 10/8/2014
■
Approval
Construction
COMPONENTS
• The DPLS1 Drain Pan Level Sensor / Control provides
protection against drain pan overflow in Mitsubishi Electric
Mr. Slim and CITY MULTI Indoor Units. It will sense a high
condensate level in the drain pan. Should this occur the
control shuts down the indoor unit before an overflow can
occur. A thermistor error code will be produced should the
DPLS1 activate indicating a fault which must be resolved
before the unit re-starts
Control Box
Water Sensor
Splice Connector
M2 Wire Harness
P Wire Harness
M1 Wire Harness
• Provides electronic overflow protection for Drain Pans in all
Mr. Slim and CITY MULTI indoor units: MFZ, MS, MSY/Z,
SEZ, SLZ, PCA/PCFY, PDFY, PEA/PEAD/PEFY, PKA/PKFY,
PLA, PLKA/PLFY, PMFY, and PVFY
• Meets requirements as listed alternative to secondary drain
pans in all indoor unit installations covered by the International
Mechanical Code and adaptations ground level.
• Powered by a twenty-year life Lithium battery, factory installed
prior to shipment. No external electric power needed for
operation. There is an audible indication of low battery
condition, should it ever need to be replaced.
Type of Harness
Indoor Unit Models
M2 Wire
Harness
MS
MFZ
MSZ/Y
PKA
PEA(D)
SEZ
P Wire
Harness
M1 Wire
Harness
Connector to Indoor Unit Control Board
Connector to Thermistor
Connector to Control Box
2 pin, female connector (with black
heat shrink) to CN111
2 pin, male connector to:
RT11 (Room Temp. Thermistor)
2 pin, male connector
2 pin, female connector to CN20
2 pin, male connector to:
TH1 (Room Temp. Thermistor)
2 pin, female connector to CN20,
CN21 or CN29
2 pin, male connector to:
• TH1 (Room Temp. Thermistor)
or TH22 (Pipe Temp. and
• Thermistor/Liquid) or TH23
(Pipe Temp Thermistor/Gas)
PCA
PLA
SLZ
PKFY-P**NBMU-E
PLFY-P**NCMU-E
PMFY-P**NBMU-E
PVFY-P**E00A
PEFY-P**NMHU-E
PLA
PKA
PCA
PEA(D)
SEZ
PKFY-P**NH/
KMU-E
PLFY-P**NBMU-E
PCFY-P**NKMU-E
PEFY-P**NMS/AU-E
4 pin, male connector to:
4 pin, female connector to CN44
• TH2 (Pipe Temp.Thermistor/
Liquid) and
• TH5 (Pipe Temp. Thermistor/
Gas)
4 pin, male connector to:
RT12 (Coil Temp. Thermistor)
MS
4 pin, female connector to CN112
MSZ/Y
MFZ
2 pin, male connector
4 pin, female connector to CN113
2 pin, male connector
4 pin, male connector to:
• RT12 (Coil Temp. Thermistor –
Main) and
• RT13 (Coil Temp. Thermistor
– Sub)
4 pin, male connector to:
RT15 (Coil Temp. Thermistor)
© 2011 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
Page 23 of 36
DIMENSIONS: DPLS1
CONTROL BOX
C
.61±.01
15.4±.1
1.71±.01
43.4±.1
.39±.01
9.8±.1
1.41±.01
35.8±.1
.79±.01
20.2±.1
1.05±.01
26.6±.1
1.40±.005
35.5±.1
.73±.01
18.4±.1
WATER SENSOR
5
9
.800±.005
20.3±.1
6
7
1.073±.005
27.2±.1
8
19
.060±.005
1.5±.1
.500±.005
12.7±.1
.125±.005
3.2±.1
.250±.005
6.4±.1
MANUFACTURED FOR :
FORM# DPLS1- 201109
© 2011 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
3400 Lawrenceville Suwanee Rd
Suwanee, GA 30024
Tele: 678-376-2900 • Fax: 800-889-9904
Toll Free: 800-433-4822 (#3)
www.mehvac.com
Specifications are subject to change without notice.
Page 24 of 36
SECTION 4C
C. Low Ambient Wind Baffle
Page 25 of 36
Submittal
Data:
Wb-Pa1/Wb-Pa2
. ... .WinD
baffle
baffle
ubmittal
Data:
Wb-Pa1/Wb-Pa2
. . .. .. ...................................................................................................................................................................................................................................................................................................................................................................................WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
..WinD
. .WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
. . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..Wind
. .. .. .. .. .. .. .. .. ..baffle
. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ... ... ... ... ...WinD
. ..WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
. . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.baffle
.........WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
....baffle
.......baffle
..baffle
baffle
wB-PA1
/
WB-PA2
/
wb-PA3
Submittal
Data:
Wb-Pa1/Wb-Pa2
...WinD
.. ..WinD
.WinD
baffle
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.WinD
.
.WinD
Job
Name:
Location:
Date:
ubmittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
.
.
.
.WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.WinD
ob
Name:
Location:
Date:
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .baffle
.WinD
baffle
Submittal
Data:
Wb-Pa1/Wb-Pa2
.
.
.
.WinD
Job
Name:
Location:
Date:
Submittal
Data:
Wb-Pa1/Wb-Pa2
.WinD
Submittal
. . . . . . . . . . . . . . . . . . . . .Location:
baffle
SubmittalData:
Data:Wb-Pa1/Wb-Pa2
Wb-Pa1/Wb-Pa2
. Location:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Date:
. .Date:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..WinD
. ..WinD
baffle
Job
Name:
Job
Name:
Job
Name:
Location:
Date:
Manufactured
for
Mitsubishi
Electric
US,
inc.
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Purchaser:
Engineer:
Job
Name:
Location:
Date:
urchaser:
Engineer:
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Purchaser:
Engineer:
ob
Name:
Location:
Date:
Job
Name:
Location:
Date:
Purchaser:
Engineer:
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Designed for P-Series
and
PUMY
Outdoor Units
Only
Job
Name:
Location:
Date:
Job
Name:
Location:
Date:
Purchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Submitted
to:
For
Reference
Approval
Construction
Purchaser:
Engineer:
ubmitted
to:
For
Reference
Approval
Construction
Purchaser:
Engineer:
Purchaser:
Engineer:
Submitted
to:
For
Reference
Approval
Construction
Job
Name:
urchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Submitted
to:
For
Reference
Purchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Purchaser:
Engineer:
Submitted
to:
For
Reference
Approval
Construction
Submitted
to: Home2Suites by Hilton
For
Reference Approval
Approval Construction
Construction
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
For
Reference
Approval
Construction
System
Designation:
Schedule
No.:
ystem
Designation:
Schedule
No.:
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
For
Reference
Approval
Construction
Submitted
Submitted
to:
to:
For
For
Reference
Reference
Approval
Approval
Construction
Construction
Submitted
to:
For
Reference
Approval
Construction
System
Designation:
Schedule
No.:
Schedule
Reference:
Date:
ubmitted
to:
ForSchedule
Reference
Approval
Construction
10/8/2014
System
Designation:
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
For
Reference
Approval
Construction
Submitted
to:
ForNo.:
Reference
Approval
Construction
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
ystem
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
System
Designation:
Schedule
No.:
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
•UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
GENERAL
FEATURES
•
GENERAL
FEATURES
•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
GENERAL
FEATURES
FEATURES
• •
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
•
Allows
P-Series
outdoor units to operate to 0º F DB cooling.
GENERAL
FEATURES
GENERAL
FEATURES
GENERAL
FEATURES
operationistobeperformedinoutdoorambienttemperaGENERAL
FEATURES
operationistobeperformedinoutdoorambienttempera•UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttempera•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
operationistobeperformedinoutdoorambienttempera•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB.
turesdownto0ºFDB.
•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB.
•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
turesdownto0ºFDB.
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
••UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
•operationistobeperformedinoutdoorambienttempera•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB.
• UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
•
•
•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
•UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
••
Allows
PUMY outdoor units to operate to 23º F DB cooling.
turesdownto0ºFDB.
•
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling
operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB.
operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB.
operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB.
operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttempera•
Usedforprotectionofthefanwhenstrongwindsstrikethe
turesdownto0ºFDB.
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
• turesdownto0ºFDB.
Usedforprotectionofthefanwhenstrongwindsstrikethe
turesdownto0ºFDB.
••Usedforprotectionofthefanwhenstrongwindsstrikethe
turesdownto0ºFDB.
turesdownto0ºFDB.
turesdownto0ºFDB.
turesdownto0ºFDB.
turesdownto0ºFDB.
Usedforprotectionofthefanwhenstrongwindsstrikethe
turesdownto0ºFDB.
turesdownto0ºFDB.
turesdownto0ºFDB.
turesdownto0ºFDB.
Prevents
wind from reversing outdoor fan rotation.
•turesdownto0ºFDB.
• •Usedforprotectionofthefanwhenstrongwindsstrikethe
turesdownto0ºFDB.
airoutlet.
airoutlet.
Usedforprotectionofthefanwhenstrongwindsstrikethe
airoutlet.
•airoutlet.
Usedforprotectionofthefanwhenstrongwindsstrikethe
•airoutlet.
Usedforprotectionofthefanwhenstrongwindsstrikethe
airoutlet.
•Usedforprotectionofthefanwhenstrongwindsstrikethe
Usedforprotectionofthefanwhenstrongwindsstrikethe
airoutlet.
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
•
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
Usedforprotectionofthefanwhenstrongwindsstrikethe
•
airoutlet.
• Usedforprotectionofthefanwhenstrongwindsstrikethe
••Usedforprotectionofthefanwhenstrongwindsstrikethe
• Usedforprotectionofthefanwhenstrongwindsstrikethe
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
Usedforprotectionofthefanwhenstrongwindsstrikethe
airoutlet.
••
Durable,
low maintenance construction.
•
Usedforprotectionofthefanwhenstrongwindsstrikethe
Usedforprotectionofthefanwhenstrongwindsstrikethe
•
Designedtopreventreverserotationoftheoutdoorunitfan
airoutlet.
•
Designedtopreventreverserotationoftheoutdoorunitfan
• airoutlet.
Designedtopreventreverserotationoftheoutdoorunitfan
airoutlet.
airoutlet.
•
airoutlet.
airoutlet.
airoutlet.
airoutlet.
•Designedtopreventreverserotationoftheoutdoorunitfan
Designedtopreventreverserotationoftheoutdoorunitfan
airoutlet.
airoutlet.
airoutlet.
airoutlet.
airoutlet.
•
Designedtopreventreverserotationoftheoutdoorunitfan
airoutlet.
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
•
Designedtopreventreverserotationoftheoutdoorunitfan
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
• •whenitenterslowspeedrotationmodewiththefancontroller
Designedtopreventreverserotationoftheoutdoorunitfan
Designedtopreventreverserotationoftheoutdoorunitfan
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
beingoperated.
•Designedtopreventreverserotationoftheoutdoorunitfan
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
•
Designedtopreventreverserotationoftheoutdoorunitfan
beingoperated.
•Designedtopreventreverserotationoftheoutdoorunitfan
Designedtopreventreverserotationoftheoutdoorunitfan
••Designedtopreventreverserotationoftheoutdoorunitfan
Designedtopreventreverserotationoftheoutdoorunitfan
•
•
Designedtopreventreverserotationoftheoutdoorunitfan
Designedtopreventreverserotationoftheoutdoorunitfan
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
• Designedtopreventreverserotationoftheoutdoorunitfan
•
•
•
Designedtopreventreverserotationoftheoutdoorunitfan
•Designedtopreventreverserotationoftheoutdoorunitfan
Designedtopreventreverserotationoftheoutdoorunitfan
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
•
Designedtopreventreverserotationoftheoutdoorunitfan
•
Designedtopreventreverserotationoftheoutdoorunitfan
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
whenitenterslowspeedrotationmodewiththefancontroller
beingoperated.
whenitenterslowspeedrotationmodewiththefancontroller
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
whenitenterslowspeedrotationmodewiththefancontroller
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
beingoperated.
• beingoperated.
Constructedfromzinc-coatedmildcarbonsteelforalongand
beingoperated.
••Constructedfromzinc-coatedmildcarbonsteelforalongand
beingoperated.
beingoperated.
beingoperated.
beingoperated.
beingoperated.
Constructedfromzinc-coatedmildcarbonsteelforalongand
beingoperated.
beingoperated.
beingoperated.
beingoperated.
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
beingoperated.
reliableservicelife.
beingoperated.
reliableservicelife.
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
reliableservicelife.
PLEASE NOTE
•reliableservicelife.
Constructedfromzinc-coatedmildcarbonsteelforalongand
reliableservicelife.
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
reliableservicelife.
•Constructedfromzinc-coatedmildcarbonsteelforalongand
reliableservicelife.
•reliableservicelife.
Constructedfromzinc-coatedmildcarbonsteelforalongand
•Constructedfromzinc-coatedmildcarbonsteelforalongand
Constructedfromzinc-coatedmildcarbonsteelforalongand
••Constructedfromzinc-coatedmildcarbonsteelforalongand
Constructedfromzinc-coatedmildcarbonsteelforalongand
•
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
Constructedfromzinc-coatedmildcarbonsteelforalongand
• Constructedfromzinc-coatedmildcarbonsteelforalongand
•
•
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
•Constructedfromzinc-coatedmildcarbonsteelforalongand
Constructedfromzinc-coatedmildcarbonsteelforalongand
reliableservicelife.
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
•
Finishedwithanelectrostaticallyapplied,thermallyfused
•
Constructedfromzinc-coatedmildcarbonsteelforalongand
•
Finishedwithanelectrostaticallyapplied,thermallyfused
reliableservicelife.
• reliableservicelife.
Finishedwithanelectrostaticallyapplied,thermallyfused
reliableservicelife.
•
Finishedwithanelectrostaticallyapplied,thermallyfused
reliableservicelife.
reliableservicelife.
reliableservicelife.
WB-PA1
reliableservicelife.
reliableservicelife.
•
Install
outdoor units with the back surface facing wall side to
•
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA1
reliableservicelife.
WB-PA1
reliableservicelife.
WB-PA2
reliableservicelife.
reliableservicelife.
WB-PA1
•
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA2
reliableservicelife.
acrylicresincoatingforcorrosionprotection.
WB-PA2
reliableservicelife.
acrylicresincoatingforcorrosionprotection.
WB-PA1
• Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA2
acrylicresincoatingforcorrosionprotection.
WB-PA2
WB-PA1
eliminate the effects of external wind.
•acrylicresincoatingforcorrosionprotection.
Finishedwithanelectrostaticallyapplied,thermallyfused
acrylicresincoatingforcorrosionprotection.
WB-PA1
WB-PA2
•
Finishedwithanelectrostaticallyapplied,thermallyfused
acrylicresincoatingforcorrosionprotection.
WB-PA2
WB-PA1
•
Finishedwithanelectrostaticallyapplied,thermallyfused
acrylicresincoatingforcorrosionprotection.
SPECIFICATIONS
SPECIFICATIONS
•
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA2
SPECIFICATIONS
WB-PA1
WB-PA1
• Finishedwithanelectrostaticallyapplied,thermallyfused
•
Finishedwithanelectrostaticallyapplied,thermallyfused
•acrylicresincoatingforcorrosionprotection.
•
Finishedwithanelectrostaticallyapplied,thermallyfused
Finishedwithanelectrostaticallyapplied,thermallyfused
SPECIFICATIONS
•
Finishedwithanelectrostaticallyapplied,thermallyfused
acrylicresincoatingforcorrosionprotection.
WB-PA1
• Finishedwithanelectrostaticallyapplied,thermallyfused
•
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA2
•
Finishedwithanelectrostaticallyapplied,thermallyfused
SPECIFICATIONS
•
Finishedwithanelectrostaticallyapplied,thermallyfused
•
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA2
• •
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA1
WB-PA1
Finishedwithanelectrostaticallyapplied,thermallyfused
WB-PA1
WB-PA1
WB-PA1
SPECIFICATIONS
WB-PA2
acrylicresincoatingforcorrosionprotection.
WB-PA1
WB-PA1
WB-PA2
WB-PA2
WB-PA1
acrylicresincoatingforcorrosionprotection.
WB-PA2
SPECIFICATIONS
WB-PA2
WB-PA2
WB-PA1
WB-PA1
acrylicresincoatingforcorrosionprotection.
WB-PA1
acrylicresincoatingforcorrosionprotection.
WB-PA2
WB-PA2
acrylicresincoatingforcorrosionprotection.
acrylicresincoatingforcorrosionprotection.
•
Outdoor
units
should
not
be
installed
in
an
orientation
or
WB-PA1
acrylicresincoatingforcorrosionprotection.
WB-PA1
PLEASE
NOTE
WB-PA2
WB-PA2
WB-PA1
WB-PA2
PLEASE
NOTE
acrylicresincoatingforcorrosionprotection.
acrylicresincoatingforcorrosionprotection.
 
WB-PA1
SPECIFICATIONS
acrylicresincoatingforcorrosionprotection.
WB-PA1
WB-PA2
PLEASE
NOTE
acrylicresincoatingforcorrosionprotection.
WB-PA2
acrylicresincoatingforcorrosionprotection.
WB-PA1
PLEASE
NOTE
acrylicresincoatingforcorrosionprotection.
WB-PA2
/ WB-PA3
acrylicresincoatingforcorrosionprotection.
SPECIFICATIONS
WB-PA1
PLEASE
NOTE
SPECIFICATIONS
SPECIFICATIONS
WB-PA1
PLEASE
NOTE
site
where the wind blows directly at the back of the unit.SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
WB-PA1
PLEASE
NOTE
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
WB-PA1
Color(Munsell)
Ivory(3.0Y7.8/1.1)
PLEASE
NOTE
SPECIFICATIONS
SPECIFICATIONS
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
WB-PA1
Color(Munsell)
Ivory(3.0Y7.8/1.1)
PLEASE
NOTE
•
Installthisunitwiththebacksurfacefacingwallsideto
Installthisunitwiththebacksurfacefacingwallsideto
WB-PA1
PLEASE
NOTE
Color(Munsell)
Ivory(3.0Y7.8/1.1)
• •
Installthisunitwiththebacksurfacefacingwallsideto
WB-PA1
NOTE
•
Installthisunitwiththebacksurfacefacingwallsideto
WB-PA1
PLEASE
NOTEnot be used where there is any obstacle
Color(Munsell)
Ivory(3.0Y7.8/1.1)
WB-PA1
PLEASE
NOTE
WB-PA1
WB-PA1
PLEASE
PLEASE
NOTE
NOTE
WB-PA1
PLEASE
NOTE
•PLEASE
Installthisunitwiththebacksurfacefacingwallsideto
WB-PA1
WB-PA1
PLEASE
NOTE
Color(Munsell)
Ivory(3.0Y7.8/1.1)
PLEASE
NOTE
WB-PA1
PLEASE
NOTE
WB-PA1
PLEASE
NOTE
WB-PA1
PLEASE
NOTE
•
Installthisunitwiththebacksurfacefacingwallsideto
•
Wind
baffle
should
WB-PA1
PLEASE
NOTE
eliminatetheeffectsofexternalwind.
WB-PA1
PLEASE
NOTE
Color(Munsell)
Ivory(3.0Y7.8/1.1)
eliminatetheeffectsofexternalwind.
Acrylicresincoating
SurfaceTreatment
•
Installthisunitwiththebacksurfacefacingwallsideto
eliminatetheeffectsofexternalwind.
Acrylicresincoating
SurfaceTreatment
Acrylicresincoating
SurfaceTreatment
eliminatetheeffectsofexternalwind.
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SurfaceTreatment
Acrylicresincoating
Exterior
• •eliminatetheeffectsofexternalwind.
Installthisunitwiththebacksurfacefacingwallsideto
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Acrylicresincoating
SurfaceTreatment
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Exterior
Installthisunitwiththebacksurfacefacingwallsideto
eliminatetheeffectsofexternalwind.
at
either
side
or
above
the
outdoor
unit
as
the
discharged
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SurfaceTreatment
Acrylicresincoating
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
•Installthisunitwiththebacksurfacefacingwallsideto
eliminatetheeffectsofexternalwind.
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Acrylicresincoating
SurfaceTreatment
•eliminatetheeffectsofexternalwind.
Installthisunitwiththebacksurfacefacingwallsideto
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
•Installthisunitwiththebacksurfacefacingwallsideto
Installthisunitwiththebacksurfacefacingwallsideto
Exterior
••will
Installthisunitwiththebacksurfacefacingwallsideto
Color(Munsell)
Ivory(3.0Y7.8/1.1)
•
•
Installthisunitwiththebacksurfacefacingwallsideto
Installthisunitwiththebacksurfacefacingwallsideto
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SPECIFICATIONS
Acrylicresincoating
SurfaceTreatment
Alloyhot-dipzinccoatedcarbon
Exterior
• Installthisunitwiththebacksurfacefacingwallsideto
•
•
Installthisunitwiththebacksurfacefacingwallsideto
Alloyhot-dipzinccoatedcarbon
•
Installthisunitwiththebacksurfacefacingwallsideto
•Installthisunitwiththebacksurfacefacingwallsideto
Installthisunitwiththebacksurfacefacingwallsideto
Alloyhot-dipzinccoatedcarbon
eliminatetheeffectsofexternalwind.
air
be blocked.
•
Installthisunitwiththebacksurfacefacingwallsideto
•
Shouldnotbeinstalledinanorientationorsitewherethe
•
Installthisunitwiththebacksurfacefacingwallsideto
Acrylicresincoating
SurfaceTreatment
Alloyhot-dipzinccoatedcarbon
Exterior
Material
•
Shouldnotbeinstalledinanorientationorsitewherethe
eliminatetheeffectsofexternalwind.
• eliminatetheeffectsofexternalwind.
Shouldnotbeinstalledinanorientationorsitewherethe
Material
SurfaceTreatment
Acrylicresincoating
Alloyhot-dipzinccoatedcarbon
eliminatetheeffectsofexternalwind.
Material
•
Shouldnotbeinstalledinanorientationorsitewherethe
eliminatetheeffectsofexternalwind.
Acrylicresincoating
SurfaceTreatment
eliminatetheeffectsofexternalwind.
Exterior
Material
eliminatetheeffectsofexternalwind.
SurfaceTreatment
Acrylicresincoating
eliminatetheeffectsofexternalwind.
eliminatetheeffectsofexternalwind.
steelsheet
Acrylicresincoating
SurfaceTreatment
Alloyhot-dipzinccoatedcarbon
•
Shouldnotbeinstalledinanorientationorsitewherethe
SurfaceTreatment
Acrylicresincoating
SurfaceTreatment
SurfaceTreatment
Acrylicresincoating
Acrylicresincoating
steelsheet
SurfaceTreatment
Acrylicresincoating
Exterior
eliminatetheeffectsofexternalwind.
Material
steelsheet
eliminatetheeffectsofexternalwind.
Acrylicresincoating
SurfaceTreatment
SurfaceTreatment
Acrylicresincoating
Alloyhot-dipzinccoatedcarbon
eliminatetheeffectsofexternalwind.
Exterior
eliminatetheeffectsofexternalwind.
Acrylicresincoating
SurfaceTreatment
steelsheet
• •Shouldnotbeinstalledinanorientationorsitewherethe
Exterior
Acrylicresincoating
SurfaceTreatment
eliminatetheeffectsofexternalwind.
Acrylicresincoating
SurfaceTreatment
Exterior
windblowsdirectlyatthebackoftheunit.
eliminatetheeffectsofexternalwind.
Material
Exterior
Exterior
Acrylicresincoating
SurfaceTreatment
Exterior
windblowsdirectlyatthebackoftheunit.
WB-PA1
steelsheet
Acrylicresincoating
SurfaceTreatment
Shouldnotbeinstalledinanorientationorsitewherethe
windblowsdirectlyatthebackoftheunit.
Alloyhot-dipzinccoatedcarbon
Exterior Exterior
Exterior
Material
Exterior
Exterior
Exterior
steelsheet
Exterior
•windblowsdirectlyatthebackoftheunit.
Shouldnotbeinstalledinanorientationorsitewherethe
Exterior
Alloyhot-dipzinccoatedcarbon
windblowsdirectlyatthebackoftheunit.
Material
steelsheet Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
Shouldnotbeinstalledinanorientationorsitewherethe
windblowsdirectlyatthebackoftheunit.
Alloyhot-dipzinccoatedcarbon
Material
steelsheet
Weight
7lb7.9oz
•Shouldnotbeinstalledinanorientationorsitewherethe
Shouldnotbeinstalledinanorientationorsitewherethe
Alloyhot-dipzinccoatedcarbon
windblowsdirectlyatthebackoftheunit.
Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
Weight
7lb7.9oz
Alloyhot-dipzinccoatedcarbon
Material
Weight
7lb7.9oz
••windblowsdirectlyatthebackoftheunit.
Shouldnotbeinstalledinanorientationorsitewherethe
Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
Material
Alloyhot-dipzinccoatedcarbon
steelsheet
Weight
7lb7.9oz
•
Shouldnotbeinstalledinanorientationorsitewherethe
•
Shouldnotbeinstalledinanorientationorsitewherethe
Material
Alloyhot-dipzinccoatedcarbon
•
•
Shouldnotbeinstalledinanorientationorsitewherethe
Shouldnotbeinstalledinanorientationorsitewherethe
Alloyhot-dipzinccoatedcarbon
•
Material
Material
Material
Material
Alloyhot-dipzinccoatedcarbon
Material
steelsheet
Color
Ivory
Weight
7lb7.9oz
• Shouldnotbeinstalledinanorientationorsitewherethe
•
Shouldnotbeinstalledinanorientationorsitewherethe
Alloyhot-dipzinccoatedcarbon
• Shouldnotbeinstalledinanorientationorsitewherethe
Material Material
Shouldnotbeinstalledinanorientationorsitewherethe
steelsheet
• •
Shouldnotbeinstalledinanorientationorsitewherethe
Material
windblowsdirectlyatthebackoftheunit.
steelsheet
Material
•
Shouldnotbeinstalledinanorientationorsitewherethe
Material
steelsheet
•
Shouldnotbeusedwherethereisanyobstacleateither
Weight
7lb7.9oz
•
Shouldnotbeinstalledinanorientationorsitewherethe
steelsheet
steelsheet
steelsheet
Material
steelsheet
•
Shouldnotbeusedwherethereisanyobstacleateither
windblowsdirectlyatthebackoftheunit.
Material
• windblowsdirectlyatthebackoftheunit.
Shouldnotbeusedwherethereisanyobstacleateither
steelsheet
steelsheet
Weight
7lb7.9oz
steelsheet
windblowsdirectlyatthebackoftheunit.
•
steelsheet
steelsheet
windblowsdirectlyatthebackoftheunit.
steelsheet
windblowsdirectlyatthebackoftheunit.
windblowsdirectlyatthebackoftheunit.
windblowsdirectlyatthebackoftheunit.
windblowsdirectlyatthebackoftheunit.
steelsheet
•Shouldnotbeusedwherethereisanyobstacleateither
Shouldnotbeusedwherethereisanyobstacleateither
Weight
7lb7.9oz
Washerfacedscrew(M4x10)x4
windblowsdirectlyatthebackoftheunit.
Washerfacedscrew(M4x10)x4
windblowsdirectlyatthebackoftheunit.
windblowsdirectlyatthebackoftheunit.
Washerfacedscrew(M4x10)x4
windblowsdirectlyatthebackoftheunit.
•
windblowsdirectlyatthebackoftheunit.
sideorabovetheoutdoorunitasthedischargedairwillbe
Weight
7lb7.9ozPolyester
Washerfacedscrew(M4x10)x4
windblowsdirectlyatthebackoftheunit.
sideorabovetheoutdoorunitasthedischargedairwillbe
•Shouldnotbeusedwherethereisanyobstacleateither
Shouldnotbeusedwherethereisanyobstacleateither
sideorabovetheoutdoorunitasthedischargedairwillbe
Weight
7lb7.9oz
Surface
Treatment
Powder Paint
Washerfacedscrew(M4x10)x4
sideorabovetheoutdoorunitasthedischargedairwillbe
Weight
7lb7.9oz
Weight
7lb7.9oz
<SUS410/Passivated>
Weight
7lb7.9oz
•
Shouldnotbeusedwherethereisanyobstacleateither
Washerfacedscrew(M4x10)x4
Weight
7lb7.9oz
sideorabovetheoutdoorunitasthedischargedairwillbe
Weight
Weight
7lb7.9oz
7lb7.9oz
<SUS410/Passivated>
Weight
7lb7.9oz
Exterior
<SUS410/Passivated>
Weight
7lb7.9oz
Weight
7lb7.9oz
Washerfacedscrew(M4x10)x4
Weight
7lb7.9oz
<SUS410/Passivated>
• Shouldnotbeusedwherethereisanyobstacleateither
Shouldnotbeusedwherethereisanyobstacleateither
sideorabovetheoutdoorunitasthedischargedairwillbe
Weight
7lb7.9oz
AccessoryxQty.
Weight
7lb7.9oz
blocked.
AccessoryxQty.
Weight
7lb7.9oz
<SUS410/Passivated>
blocked.
Weight
7lb7.9oz
•Shouldnotbeusedwherethereisanyobstacleateither
sideorabovetheoutdoorunitasthedischargedairwillbe
AccessoryxQty.
blocked.
Washerfacedscrew(M4x10)x4
AccessoryxQty.
•
Washerfacedscrew(M5x15)x4
blocked.
<SUS410/Passivated>
•Shouldnotbeusedwherethereisanyobstacleateither
Shouldnotbeusedwherethereisanyobstacleateither
Washerfacedscrew(M5x15)x4
MODEL
REQUIRED PER OUTDOOR UNIT
••Shouldnotbeusedwherethereisanyobstacleateither
Shouldnotbeusedwherethereisanyobstacleateither
•sideorabovetheoutdoorunitasthedischargedairwillbe
•
Shouldnotbeusedwherethereisanyobstacleateither
Shouldnotbeusedwherethereisanyobstacleateither
AccessoryxQty.
sideorabovetheoutdoorunitasthedischargedairwillbe
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M4x10)x4
blocked.
<SUS410/Passivated>
• Shouldnotbeusedwherethereisanyobstacleateither
•
Shouldnotbeusedwherethereisanyobstacleateither
Washerfacedscrew(M5x15)x4
•
Washerfacedscrew(M4x10)x4
<Material/SurfaceTreatment>
Alloy
hot-dip
zinc coated carbon
•
Shouldnotbeusedwherethereisanyobstacleateither
AccessoryxQty.
•
Shouldnotbeusedwherethereisanyobstacleateither
<Material/SurfaceTreatment>
blocked.
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M4x10)x4
•
Shouldnotbeusedwherethereisanyobstacleateither
<Material/SurfaceTreatment>
•
Shouldnotbeusedwherethereisanyobstacleateither
Washerfacedscrew(M4x10)x4
<SUS410/Passivated>
AccessoryxQty. Material Washerfacedscrew(M4x10)x4
Washerfacedscrew(M4x10)x4
sideorabovetheoutdoorunitasthedischargedairwillbe
blocked.
<Material/SurfaceTreatment>
Washerfacedscrew(M4x10)x4
Washerfacedscrew(M4x10)x4
Washerfacedscrew(M4x10)x4
Washerfacedscrew(M4x10)x4
<Ironwire(SWCH18A)/Zincnickel
Washerfacedscrew(M5x15)x4
sideorabovetheoutdoorunitasthedischargedairwillbe
<Ironwire(SWCH18A)/Zincnickel
Washerfacedscrew(M4x10)x4
<Material/SurfaceTreatment>
sideorabovetheoutdoorunitasthedischargedairwillbe
<Ironwire(SWCH18A)/Zincnickel
Washerfacedscrew(M4x10)x4
<SUS410/Passivated>
sideorabovetheoutdoorunitasthedischargedairwillbe
Washerfacedscrew(M4x10)x4
AccessoryxQty.
Washerfacedscrew(M5x15)x4
sideorabovetheoutdoorunitasthedischargedairwillbe
Washerfacedscrew(M4x10)x4
sideorabovetheoutdoorunitasthedischargedairwillbe
sideorabovetheoutdoorunitasthedischargedairwillbe
blocked.
<Ironwire(SWCH18A)/Zincnickel
Washerfacedscrew(M4x10)x4
<SUS410/Passivated>
steel
sheet
Washerfacedscrew(M4x10)x4
sideorabovetheoutdoorunitasthedischargedairwillbe
sideorabovetheoutdoorunitasthedischargedairwillbe
<Material/SurfaceTreatment>
sideorabovetheoutdoorunitasthedischargedairwillbe
<Ironwire(SWCH18A)/Zincnickel
<SUS410/Passivated>
sideorabovetheoutdoorunitasthedischargedairwillbe
AccessoryxQty.
sideorabovetheoutdoorunitasthedischargedairwillbe
<SUS410/Passivated>
Washerfacedscrew(M5x15)x4
blocked.
<Material/SurfaceTreatment>
<SUS410/Passivated>
sideorabovetheoutdoorunitasthedischargedairwillbe
•
CanalsobemountedontheCITYMULTIS-Series3-ton
<SUS410/Passivated>
sideorabovetheoutdoorunitasthedischargedairwillbe
<SUS410/Passivated>
<SUS410/Passivated>
<SUS410/Passivated>
AccessoryxQty.
plated>
•
CanalsobemountedontheCITYMULTIS-Series3-ton
blocked.
<Ironwire(SWCH18A)/Zincnickel
plated>
<SUS410/Passivated>
<SUS410/Passivated>
• blocked.
CanalsobemountedontheCITYMULTIS-Series3-ton
AccessoryxQty.
Type
and
Quantity
plated>
<SUS410/Passivated>
Washerfacedscrew(M5x15)x4
blocked.
AccessoryxQty.
<SUS410/Passivated>
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
•
CanalsobemountedontheCITYMULTIS-Series3-ton
<SUS410/Passivated>
AccessoryxQty.
blocked.
plated>
AccessoryxQty.
blocked.
AccessoryxQty.
AccessoryxQty.
<SUS410/Passivated>
AccessoryxQty.
Washerfacedscrew(M5x15)x4
blocked.
blocked.
blocked.
<SUS410/Passivated>
• •
CanalsobemountedontheCITYMULTIS-Series3-ton
AccessoryxQty.
AccessoryxQty.
plated>
Washerfacedscrew(M5x15)x4
blocked.
AccessoryxQty.
<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
blocked.
AccessoryxQty.
Washerfacedscrew(M5x15)x4
blocked.
Washerfacedscrew(M5x15)x4
blocked.
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M5x15)x4
AccessoryxQty.
Washerfacedscrew(M5x15)x4
<Material/SurfaceTreatment>
AccessoryxQty.
blocked.
plated>
and4-tonunitchangingthedirectionoftheoutputairtoa
blocked.
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M5x15)x4
<Material/SurfaceTreatment>
UNIT
MODEL
and4-tonunitchangingthedirectionoftheoutputairtoa
<Ironwire(SWCH18A)/Zincnickel
•CanalsobemountedontheCITYMULTIS-Series3-ton
CanalsobemountedontheCITYMULTIS-Series3-ton
<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4
plated>
and4-tonunitchangingthedirectionoftheoutputairtoa
Weight
7Washerfacedscrew(M5x15)x4
lb Washerfacedscrew(M5x15)x4
7.9
oz
Washerfacedscrew(M5x15)x4
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
•and4-tonunitchangingthedirectionoftheoutputairtoa
CanalsobemountedontheCITYMULTIS-Series3-ton
<Material/SurfaceTreatment>
and4-tonunitchangingthedirectionoftheoutputairtoa
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
plated>
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
•
CanalsobemountedontheCITYMULTIS-Series3-ton
and4-tonunitchangingthedirectionoftheoutputairtoa
WB-PA1
WB-PA2
WB-PA3
<Ironwire(SWCH18A)/Zincnickel
plated>
45ºangle.
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
45ºangle.
•
CanalsobemountedontheCITYMULTIS-Series3-ton
and4-tonunitchangingthedirectionoftheoutputairtoa
<Ironwire(SWCH18A)/Zincnickel
plated>
45ºangle.
<Ironwire(SWCH18A)/Zincnickel
•
CanalsobemountedontheCITYMULTIS-Series3-ton
45ºangle.
plated>
•
CanalsobemountedontheCITYMULTIS-Series3-ton
plated>
•
CanalsobemountedontheCITYMULTIS-Series3-ton
plated>
•and4-tonunitchangingthedirectionoftheoutputairtoa
•
CanalsobemountedontheCITYMULTIS-Series3-ton
CanalsobemountedontheCITYMULTIS-Series3-ton
•
CanalsobemountedontheCITYMULTIS-Series3-ton
and4-tonunitchangingthedirectionoftheoutputairtoa
plated>
plated>
plated>
45ºangle.
plated>
• CanalsobemountedontheCITYMULTIS-Series3-ton
•
CanalsobemountedontheCITYMULTIS-Series3-ton
plated>
plated>
•
CanalsobemountedontheCITYMULTIS-Series3-ton
CanalsobemountedontheCITYMULTIS-Series3-ton
plated>
• •
CanalsobemountedontheCITYMULTIS-Series3-ton
plated>
45ºangle.
plated>
•
CanalsobemountedontheCITYMULTIS-Series3-ton
•
CanalsobemountedontheCITYMULTIS-Series3-ton
plated>
plated>
and4-tonunitchangingthedirectionoftheoutputairtoa
45ºangle.
WB-PA2
and4-tonunitchangingthedirectionoftheoutputairtoa
WB-PA2
and4-tonunitchangingthedirectionoftheoutputairtoa
WB-PA2
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
45ºangle.
PUY/Z-A12NHA4
1
WB-PA2
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
WB-PA2
and4-tonunitchangingthedirectionoftheoutputairtoa
45ºangle.
and4-tonunitchangingthedirectionoftheoutputairtoa
and4-tonunitchangingthedirectionoftheoutputairtoa
45ºangle.
WB-PA2
45ºangle.
WB-PA2
WB-PA2
45ºangle.
45ºangle.
45ºangle.
45ºangle.
45ºangle.
45ºangle.
45ºangle.
45ºangle.
WB-PA2
Color(Munsell)
Ivory(3.0Y7.8/1.1)
45ºangle.
45ºangle.
Color(Munsell)
Ivory(3.0Y7.8/1.1)
45ºangle.
45ºangle.
Color(Munsell)
Ivory(3.0Y7.8/1.1)
WB-PA2
Color(Munsell)
Ivory(3.0Y7.8/1.1)
PUY/Z-A18NHA4
1
WB-PA2
Color(Munsell)
Ivory(3.0Y7.8/1.1)
WB-PA2
WB-PA2
Color(Munsell)
Ivory(3.0Y7.8/1.1)
WB-PA2
WB-PA2
WB-PA2
WB-PA2
WB-PA2
WB-PA2
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color
Ivory
WB-PA2
WB-PA2
WB-PA2
WB-PA2
WB-PA2
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SurfaceTreatment
Acrylicresincoating
SurfaceTreatment
Acrylicresincoating
SurfaceTreatment
Acrylicresincoating
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SurfaceTreatment
Acrylicresincoating
PUY/Z-A24NHA4
1
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Exterior
SurfaceTreatment
Acrylicresincoating
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Ivory(3.0Y7.8/1.1)
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SurfaceTreatment
Acrylicresincoating
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Exterior
Color(Munsell)
Ivory(3.0Y7.8/1.1)
SurfaceTreatment
Acrylicresincoating
Surface
Treatment
Acrylic
resin coating
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Color(Munsell)
Ivory(3.0Y7.8/1.1)
Exterior
SurfaceTreatment
Acrylicresincoating
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
ExteriorExterior
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
SurfaceTreatment
Acrylicresincoating
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Exterior
Material
PUY/Z-A30NHA4
1UNIT
SurfaceTreatment
Acrylicresincoating
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Material
SurfaceTreatment
Acrylicresincoating
Material
SurfaceTreatment
Acrylicresincoating
steelsheet
Exterior
SurfaceTreatment
Acrylicresincoating
Material
Alloyhot-dipzinccoatedcarbon
SurfaceTreatment
Acrylicresincoating
MODEL
REQUIRED
PER
OUTDOOR
SurfaceTreatment
SurfaceTreatment
Acrylicresincoating
Acrylicresincoating
steelsheet
SurfaceTreatment
Acrylicresincoating
steelsheet
Exterior
SurfaceTreatment
Acrylicresincoating
SurfaceTreatment
Acrylicresincoating
Alloyhot-dipzinccoatedcarbon
Material
Alloy
hot-dip
zinc coated carbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
SurfaceTreatment
Acrylicresincoating
steelsheet
Exterior
SurfaceTreatment
Acrylicresincoating
SurfaceTreatment
Acrylicresincoating
Exterior
Exterior
SurfaceTreatment
Acrylicresincoating
Exterior
steelsheet
SurfaceTreatment
Acrylicresincoating
Exterior
Material
Exterior
Alloyhot-dipzinccoatedcarbon
MODEL
PER
OUTDOOR
UNIT
Exterior Exterior
Exterior
Material
Material
Exterior
Exterior
steelsheet
Type
and
Quantity
Exterior
Exterior
Type
and
Quantity
Alloyhot-dipzinccoatedcarbon
MODELREQUIRED
REQUIRED
PER
OUTDOOR
UNIT
Exterior
steelsheet
steelAlloyhot-dipzinccoatedcarbon
sheet
Type
and
Quantity
Material
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Type
and
Quantity
PUY/Z-A36NHA4
1
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Type
and
Quantity
steelsheet
Alloyhot-dipzinccoatedcarbon
Material
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Alloyhot-dipzinccoatedcarbon
MODEL
MODEL
REQUIRED
REQUIRED
PER
PER
OUTDOOR
OUTDOOR
UNIT
UNIT
MODEL
REQUIRED
PER
OUTDOOR
UNIT
UNIT
MODEL
Weight
8lb3.7oz
Material
Alloyhot-dipzinccoatedcarbon
Alloyhot-dipzinccoatedcarbon
Type
and
Quantity
MODEL
REQUIRED
PER
OUTDOOR
UNIT
MODEL
REQUIRED
PER
OUTDOOR
UNIT
UNIT
MODEL
Alloyhot-dipzinccoatedcarbon
steelsheet
Weight
8lb3.7oz
MODEL
REQUIRED
PER
OUTDOOR
UNIT Weight
Alloyhot-dipzinccoatedcarbon
UNIT
MODEL
Material
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Alloyhot-dipzinccoatedcarbon
8lb3.7oz
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Type
and
Quantity
Material
Alloyhot-dipzinccoatedcarbon
steelsheet
UNIT
MODEL
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Material
Alloyhot-dipzinccoatedcarbon
Weight
8lb3.7oz
Material
MODEL
REQUIRED
PER
OUTDOOR
UNIT
Material
Material
Material
steelsheet
UNIT
MODEL
Material
Material
steelsheet
Weight
8lb3.7oz
steelsheet
Material
steelsheet
Type
Quantity
steelsheet
steelsheet
Material
steelsheet
WB-PA1
WB-PA2
Material
steelsheet
steelsheet
UNIT
MODEL
Material
WB-PA1
WB-PA2
Weight
8lb3.7oz
WB-PA1
WB-PA2
steelsheet
steelsheet
Typeand
and
Quantity
UNIT
MODEL
Weight Weight Material
8lb3.7oz
steelsheet
8steelsheet
lb steelsheet
4.4
oz
WB-PA1
WB-PA2
PUY/Z-A42NHA4
2and
Type
and
Quantity
WB-PA1
WB-PA2
Type
and
Quantity
UNIT
MODEL
Weight
8lb3.7oz
Washerfacedscrew(M5x15)x4
Type
and
Quantity
Type
Quantity
Type
and
Quantity
Washerfacedscrew(M5x15)x4
Type
and
Quantity
WB-PA1
WB-PA2
Washerfacedscrew(M5x15)x4
Type
and
Quantity
Type
and
Quantity
UNIT
MODEL
Type
and
Quantity
Weight
8lb3.7oz
Washerfacedscrew(M5x15)x4
WB-PA1
WB-PA2
Type
and
Quantity
AccessoryxQty.
Type
and
Quantity
UNIT
MODEL
AccessoryxQty.
Type
and
Quantity
Weight
8lb3.7oz
Type
and
Quantity
Washerfacedscrew(M5x15)x4
AccessoryxQty.
UNIT
MODEL
Weight
8lb3.7oz
AccessoryxQty.
WB-PA1
WB-PA2
UNIT
MODEL
Weight
8lb3.7oz
<Ironwire(SWCH18A)/Zincnickel
UNIT
MODEL
Weight
8lb3.7oz
PUY/Z-A12NHA4
1
0
UNIT
MODEL
Washerfacedscrew(M5x15)x4
UNIT
MODEL
Weight
8lb3.7oz
Weight
Weight
8lb3.7oz
8lb3.7oz
<Ironwire(SWCH18A)/Zincnickel
Weight
8lb3.7oz
PUY/Z-A12NHA4
1
0
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
UNIT
MODEL
UNIT
MODEL
PUY/Z-A12NHA4
1
0
Weight
8lb3.7oz
Weight
8lb3.7oz
Washerfacedscrew(M5x15)x4
WB-PA1
WB-PA2
UNIT
MODEL
Weight
8lb3.7oz
<Ironwire(SWCH18A)/Zincnickel
UNIT
MODEL
Weight
8lb3.7oz
PUY/Z-A12NHA4
1
0
<Material/SurfaceTreatment>
UNIT
MODEL
Weight
8lb3.7oz
PUY/Z-A42NHA5
2
AccessoryxQty.
WB-PA1
WB-PA2
UNIT
MODEL
<Material/SurfaceTreatment>
Weight
8lb3.7oz
UNIT
MODEL
<Ironwire(SWCH18A)/Zincnickel
Weight
8lb3.7oz
PUY/Z-A12NHA4
1WB-PA1
0WB-PA2
WB-PA1
WB-PA2
Washerfacedscrew(M5x15)x4
AccessoryxQty.
<Material/SurfaceTreatment>
WB-PA1
WB-PA2<Material/SurfaceTreatment>
plated>
WB-PA1
WB-PA2
WB-PA1
WB-PA1
WB-PA2
WB-PA2
<Ironwire(SWCH18A)/Zincnickel
WB-PA1
WB-PA2
plated>
PUY/Z-A12NHA4
1 WB-PA2
00
<Material/SurfaceTreatment>
plated>
Washerfacedscrew(M5x15)x4
WB-PA1
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
WB-PA1
WB-PA2
PUY/Z-A12NHA4
1
plated>
WB-PA1
WB-PA2
WB-PA1
WB-PA2
Washerfacedscrew(M5x15)x4
<Material/SurfaceTreatment>
WB-PA1
WB-PA2
WB-PA1
WB-PA2
plated>
Washerfacedscrew(M5x15)x4
AccessoryxQty.
Washerfacedscrew(M5x15)x4
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
Washerfacedscrew(M5x15)x4
PUY/Z-A12NHA4
11
00
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M5x15)x4
Washerfacedscrew(M5x15)x4
AccessoryxQty.
PUY/Z-A18NHA4
plated>
Washerfacedscrew(M5x15)x4
PUY/Z-A18NHA4
Washerfacedscrew(M5x15)x4
AccessoryxQty.
Washerfacedscrew(M5x15)x4
<Ironwire(SWCH18A)/Zincnickel
PUY/Z-A18NHA4
1 11 11
0 00 00
WB-PA3
PUY/Z-A12NHA4
AccessoryxQty.
Washerfacedscrew(M5x15)x4
<Material/SurfaceTreatment>
plated>
Washerfacedscrew(M5x15)x4
AccessoryxQty.
AccessoryxQty.
PUY/Z-A18NHA4
AccessoryxQty.
AccessoryxQty.
Washerfacedscrew(M5x15)x4
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
PUZ-HA30NHA4
2
Washerfacedscrew(M5x15)x4
PUY/Z-A12NHA4
1
0
AccessoryxQty.
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
PUY/Z-A18NHA4
AccessoryxQty.
<Material/SurfaceTreatment>
PUY/Z-A12NHA4
1
0
<Ironwire(SWCH18A)/Zincnickel
AccessoryxQty.
plated>
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
PUY/Z-A12NHA4
1
0
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
AccessoryxQty.
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
PUY/Z-A12NHA4
1
0
PUY/Z-A12NHA4
PUY/Z-A12NHA4
1
1
0
0
AccessoryxQty.
PUY/Z-A12NHA4
1
0
PUY/Z-A18NHA4
1
0
<Ironwire(SWCH18A)/Zincnickel
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
PUY/Z-A12NHA4
1
0
PUY/Z-A12NHA4
1
0
<Ironwire(SWCH18A)/Zincnickel
plated>
PUY/Z-A12NHA4
1
0
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
PUY/Z-A18NHA4
1 1 1 1 10 0 0 0 0 0
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
PUY/Z-A12NHA4
PUY/Z-A12NHA4
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
<Ironwire(SWCH18A)/Zincnickel
<Material/SurfaceTreatment>
plated>
<Ironwire(SWCH18A)/Zincnickel
PUY/Z-A12NHA4
PUY/Z-A12NHA4
<Material/SurfaceTreatment>
<Material/SurfaceTreatment>
plated>
<Material/SurfaceTreatment>
plated>
<Material/SurfaceTreatment>
PUY/Z-A18NHA4
1
<Material/SurfaceTreatment>
plated>
plated>
plated>
plated>
PUY/Z-A24NHA4
0
1
<Material/SurfaceTreatment>
plated>
<Material/SurfaceTreatment>
Color
Ivory
PUY/Z-A24NHA4
0
1
plated>
plated>
PUY/Z-A24NHA4
0
1
plated>
PUY/Z-A18NHA4
1
0
plated>
plated>
PUY/Z-A24NHA4
0
1
PUZ-HA36NHA4
plated>
PUY/Z-A18NHA4
plated>
PUY/Z-A24NHA4
10110210
PUY/Z-A18NHA4
PUY/Z-A18NHA4
PUY/Z-A18NHA4
PUY/Z-A18NHA4
00 00
PUY/Z-A18NHA4
PUY/Z-A18NHA4
PUY/Z-A24NHA4
PUY/Z-A18NHA4
1 01010111 0
PUY/Z-A18NHA4
PUY/Z-A18NHA4
PUY/Z-A24NHA4
1100 0 0 0 0
PUY/Z-A18NHA4
1 1 11 1
PUY/Z-A18NHA4
PUY/Z-A18NHA4
PUY/Z-A18NHA4
PUY/Z-A24NHA4
00
PUY/Z-A30NHA4
Surface Treatment
Acrylic resin coating
PUY/Z-A30NHA4
00 00
11 11 1 20
PUY/Z-A30NHA4
0
1
PUY/Z-A24NHA4
PUY/Z-A30NHA4
PUMY-P36NHMU
PUY/Z-A24NHA4
1
PUY/Z-A30NHA4
Exterior
PUY/Z-A24NHA4
000 00 1
10101 1
PUY/Z-A24NHA4
PUY/Z-A24NHA4
11 1
PUY/Z-A24NHA4
PUY/Z-A24NHA4
PUY/Z-A24NHA4
PUY/Z-A30NHA4
PUY/Z-A24NHA4
0
PUY/Z-A24NHA4
PUY/Z-A24NHA4
PUY/Z-A30NHA4
1011 1 1 1 1
PUY/Z-A24NHA4
PUY/Z-A24NHA4
PUY/Z-A24NHA4
PUY/Z-A24NHA4
PUY/Z-A30NHA4
0 0 0 0 01011011 0
Alloy hot-dip zinc coated carbon
PUY/Z-A36NHA4
PUY/Z-A36NHA4
PUY/Z-A36NHA4
0 00 00
PUY/Z-A30NHA4
1020
PUY/Z-A36NHA4
PUMY-P48NHMU
PUY/Z-A30NHA4
Material
PUY/Z-A36NHA4
1
PUY/Z-A30NHA4
0
1
PUY/Z-A30NHA4
PUY/Z-A30NHA4
0
PUY/Z-A30NHA4
0111111 1 1 1
11 11
steel sheet
PUY/Z-A30NHA4
PUY/Z-A30NHA4
PUY/Z-A36NHA4
000000 1
PUY/Z-A30NHA4
0
PUY/Z-A30NHA4
PUY/Z-A30NHA4
PUY/Z-A36NHA4
PUY/Z-A30NHA4
0 0 01 0
PUY/Z-A30NHA4
PUY/Z-A30NHA4
PUY/Z-A30NHA4
1
PUY/Z-A36NHA4
0
PUY/Z-A42NHA4
0
2
PUY/Z-A42NHA4
PUY/Z-A42NHA4
0 0 0000
2 2 2211 0
PUY/Z-A36NHA4
PUY/Z-A42NHA4
PUMY-P60NKMU
PUY/Z-A36NHA4
121
PUY/Z-A42NHA4
PUY/Z-A36NHA4
PUY/Z-A36NHA4
0
PUY/Z-A36NHA4
0
1
PUY/Z-A36NHA4
PUY/Z-A36NHA4
0
0
1
1
PUY/Z-A36NHA4
0
1
PUY/Z-A42NHA4
0
2
Weight
8 lb 8 oz
PUY/Z-A36NHA4
0
1
PUY/Z-A36NHA4
0
1
PUY/Z-A36NHA4
PUY/Z-A42NHA4
2 1111 1
PUY/Z-A36NHA4
PUY/Z-A36NHA4
PUY/Z-A36NHA4
PUY/Z-A36NHA4
PUY/Z-A42NHA4
0 0 0 0 02022022 0
PUZ-HA30NHA2
PUZ-HA30NHA2
PUZ-HA30NHA2
0 00 00
PUY/Z-A42NHA4
20 0
PUZ-HA30NHA2
PUY/Z-A42NHA4
2
PUZ-HA30NHA2
2
PUY/Z-A42NHA4
0
2
PUY/Z-A42NHA4
2
PUY/Z-A42NHA4
0
2
PUY/Z-A42NHA4
0222222 2 2 2
2
PUY/Z-A42NHA4
PUY/Z-A42NHA4
PUZ-HA30NHA2
00 00 2
PUY/Z-A42NHA4
0
PUY/Z-A42NHA4
PUY/Z-A42NHA4
PUZ-HA30NHA2
PUY/Z-A42NHA4
PUY/Z-A42NHA4
PUY/Z-A42NHA4
PUY/Z-A42NHA4
2
PUZ-HA30NHA2
0 0 0 0 02022022 0
PUZ-HA36NHA2
PUZ-HA36NHA2
PUZ-HA36NHA2
0 00 00
PUZ-HA30NHA2
20
PUZ-HA36NHA2
PUZ-HA30NHA2
PUZ-HA36NHA2
2
PUZ-HA30NHA2
0
2
PUZ-HA30NHA2
0
PUZ-HA30NHA2
0
22 22
PUZ-HA30NHA2
PUZ-HA30NHA2
0
0
2
2
PUZ-HA30NHA2
0
PUZ-HA36NHA2
0
2
PUZ-HA30NHA2
0
PUZ-HA30NHA2
0 2
PUZ-HA30NHA2
PUZ-HA36NHA2
222 2 2 2 2
PUZ-HA30NHA2
PUZ-HA30NHA2
PUZ-HA30NHA2
PUZ-HA30NHA2
PUZ-HA36NHA2
0 0 0 0 0 0 02 0
PUZ-HA36NHA2
2
PUZ-HA36NHA2
PUZ-HA36NHA2
0 0 00 2
200202
PUZ-HA36NHA2
PUZ-HA36NHA2
022 2
PUZ-HA36NHA2
22 22
PUZ-HA36NHA2
PUZ-HA36NHA2
PUZ-HA36NHA2
0
PUZ-HA36NHA2
PUZ-HA36NHA2
PUZ-HA36NHA2
PUZ-HA36NHA2
0000 0
PUZ-HA36NHA2
22 2
PUZ-HA36NHA2
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
2012
MITSUBISHI
ELECTRIC
& ELECTRONICS,
ELECTRONICS,
INC.
2012
MITSUBISHI
ELECTRIC
INC.
012
MITSUBISHI
ELECTRIC
&&
ELECTRONICS,
INC.
©
MITSUBISHI
ELECTRIC
&
INC.
©2012
2012
MITSUBISHI
ELECTRIC
&ELECTRONICS,
ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©2012
2012
MITSUBISHI
ELECTRIC
&ELECTRONICS,
ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©
MITSUBISHI
ELECTRIC
&
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©
©
2012
2012
MITSUBISHI
MITSUBISHI
ELECTRIC
ELECTRIC
&
&
ELECTRONICS,
ELECTRONICS,
INC.
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
012 MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
©©2012
MITSUBISHI
ELECTRIC
&&ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
& ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
&&
ELECTRONICS,
INC.
2012
MITSUBISHI
ELECTRIC
ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
ELECTRONICS,
INC.
©
2012
MITSUBISHI
ELECTRIC
&
ELECTRONICS,
INC.
Specifications are subject to change without notice.
© 2012 Mitsubishi Electric US, Inc.
Page 26 of 36
DIMENSIONS: WB-PA1
DimenSiOnS: Wb-Pa1
© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.
Specifications are subject to change without notice.
© 2012 Mitsubishi Electric US, Inc.
Page 27 of 36
SECTION 5
WIRING INFORMATION
Page 28 of 36
4
WIRING DIAGRAM
SLZ-KA09NA.TH
SLZ-KA12NA.TH
SLZ-KA15NA.TH
TB4
S1
S2
S3
GRILLE
MF
1
3
ORN
C1
P.B
RED
5
1 3 5 7 9
1
WHT
(FAN)
FAN
3
RED
1
(D·HEATER)
CNC
3 BLU 1
(D·U·M)
CNP
X1
ORN
BLU
5
7
6
3
2
1
RED
BLU
MV
20
RED
ORN
YLW
WHT
BLU
TO
OUTDOOR
UNIT
M
1~
M
1~
RED
WHT
MV
5
DP
YLW
YLW
5
MV
10
5
RED
RED
MV
RED
RED
BLK
YLW
BRN
WHT
BLU
H2
3 RED
1
(POWER
BOARD)
CNDK
FUSE
3 ORN
(POWER)
CND
1
I.B
1
3
3
BLU
(CONTROL)
CN3C
DC13.1V
1
X7
X6 X5 X4
WHT
(POWER
BOARD)
CN2D
SWE
ON
OFF
LED3
12345
CN32
<Fig: + 1>
MODELS
1
SW2
SLZKA09NA
ON
OFF
SLZKA12NA
ON
OFF
SLZKA15NA
ON
OFF
See Fig:+ 1
12345
3
CN24
2
2
1
CN51
5
RED
CN105
1
5
1
CN41
1 4
GRN
(VANE)
CN6V
6
1
LED2
CN2S
(WHT)
BLK
WHT
2
LED1
CN30
1
WHT
(DRAIN)
CN31
CN90
9
3
1
BLK
RED
(2 PHASE) (INTAKE)
CN29
CN20
2
1 2
1
1
3
1
BLU
WHT
(LIQUID) (REMOCON)
CN22
CN21
2
1
5
2
1
5
t°
t°
t°
t°
RFI
12345
1
2
BLU
BLU
ON
OFF
CN2L
RED
ORN
YLW
WHT
BLU
SW2
CNSK
(RED)
DS
TH5
TH1
TH2
2
TB15
1
2
R.B
TB6
1
2
12345
The black square (Ŷ) indicates a switch position.
[LEGEND]
SYMBOL
P.B
I.B
CN2L
CN24
CN30
CN32
CN41
CN51
CN105
FUSE
LED1
LED2
LED3
SW2
SWE
X1
X4
X5
X6
X7
NAME
INDOOR POWER BOARD
INDOOR CONTROLLER BOARD
CONNECTOR (LOSSNAY)
CONNECTOR (BACK-UP HEATING)
CONNECTOR (LLC)
CONNECTOR (REMOTE SWITCH)
CONNECTOR (HA TERMINAL-A)
CENTRALLY CONTROL
CONNECTOR (RADIO FREQUENCY INTERFACE)
FUSE (T6.3AL250V)
POWER SUPPLY (I.B)
POWER SUPPLY (I.B)
TRANSMISSION (INDOOR-OUTDOOR)
SWITCH (CAPACITY CODE)
SWITCH (EMERGENCY OPERATION)
DRAIN PUMP/DEW PREVENTION HEATER
RELAY (FAN MOTOR LL)
RELAY (FAN MOTOR Lo)
RELAY (FAN MOTOR Hi)
RELAY (FAN MOTOR Me)
SYMBOL
C1
DP
DS
RFI
NAME
CAPACITOR (FAN MOTOR)
DRAIN PUMP
DRAIN SENSOR
RADIO FREQUENCY INTERFACE FOR
RF THERMOSTAT
H2
DEW PREVENTION HEATER
FAN MOTOR (WITH THERMAL FUSE)
MF
VANE MOTOR
MV
TB4
TERMINAL BLOCK
(INDOOR/OUTDOOR CONNECTING LINE)
TB15
TERMINAL BLOCK (REMOTE CONTROLLER
TRANSMISSION LINE)
TH1
ROOM TEMP. THERMISTOR
(32°F / 15kȍ, 77°F / 5.4kȍ DETECT)
TH2
PIPE TEMP. THERMISTOR/LIQUID
(32°F / 15kȍ, 77°F / 5.4kȍ DETECT)
TH5
COND. / EVA. TEMP. THERMISTOR
(32°F / 15kȍ, 77°F / 5.4kȍ DETECT)
OPTION PART
WIRED REMOTE CONTROLLER BOARD
R.B
TERMINAL BLOCK (REMOTE CONTROLLER
TB6
TRANSMISSION LINE)
NOTES: 1. Since the outdoor side electric wiring may change be sure to check the
outdoor unit electric wiring for servicing.
2. Indoor and outdoor connecting wires are made with poIarities, make wiring
matching terminal numbers (S1, S2, S3).
3. Use copper supply wires.
: Connector,
: Terminal (block).
4. SymboIs used in wiring diagram above are,
+For details on how to operate self-diagnosis refer to the technical manuals etc.
9
Page 29 of 36
6
WIRING DIAGRAM
MXZ-2B20NA
MXZ-2B20NA -
1
12
Page 30 of 36
WIRING DIAGRAM
7
PUZ-A18NHA4
[LEGEND]
SYMBOL
TB1
MC
MF1
21S4
63H
TH3
TH6
TH7
TH8
TH32
LEV-A
ACL
CY1,CY2
P.B.
TABR/S
TABU/V/W
PUZ-A18NHA4-BS
NAME
SYMBOL
Terminal Block<Power Supply, Indoor/Outdoor>
PFC
Motor for Compressor
IPM
Fan Motor
CB1~CB3
N.F.
Solenoid Valve (Four-Way Valve)
High Pressure Switch
LI/LO
Thermistor<Outdoor Pipe>
NI/NO
EI,E2,E3
Thermistor<Outdoor 2-Phase Pipe>
52C
Thermistor<Outdoor>
Thermistor<Heatsink>
C.B.
Thermistor<Shell>
SW1
Electronic Expansion Valve
Reactor
SW4
Capacitor
SW5
Power Circuit Board
SW6
SW7
Connection Terminal<L1/L2-Phase>
SW8
Connection Terminal<U/V/W-Phase>
PUY-A12/18NHA4
NAME
Converter
Power Module
Main Smoothing Capacitor
Noise Filter Circuit Board
Connection Terminal<L1-Phase>
Connection Terminal<L2-Phase>
Connection Terminal<Ground>
52C Relay
Controller Circuit Board
Switch<Forced Defrost, Defect History
Record Reset, Refrigerant Address>
Switch<Test Operation>
Switch<Function Switch>
Switch<Model Select>
Switch<Function Setup>
Switch<Function Setup>
PUY-A12/18NHA4-BS
SYMBOL
SW9
LED1,LED2
F1~F4
SWP
CN31
SS
CNM
CNMNT
NAME
Switch
LED<Operation Inspection Indicators>
Fuse<T6.3AL250V>
Switch<Pump Down>
Connector<Emergency Operation>
Connector<Connection for Option>
Connector<A-Control Service Inspection Kit>
Connector
<Connected to Optional M-NET Adapter Board>
CNVMNT Connector
<Connected to Optional M-NET Adapter Board>
Connector <Connected for Option (Contact Input)>
CNDM
Connector <Connected for Option (Signal output)>
CN51
X51, X52, X55 Relay
When M-NET adapter is connected
LEV-A
t°
1
TRANS
3
1
14
CNM
(WHT)
63H
(YLW)
CN52C
(RED)
CN4
(WHT)
7
5
1 2
2
X51
4
X55
3
X52
F1
2
1 3
1 SV2 3
1 SS
21S4 3
(GRN)
F4
(BLU)
21S4
RED
RED
WHT
WHT
M-NET ADAPTER
2
1
3
3
A B S
1
TB7
5
M-NET
1
(WHT)
PUZ only
RED
WHT
ACL
LO
MS MC
3~
U
2
CN4 1
(WHT) 2
2
CN52C
(BLK)
CN5 1
(RED) 2
TABU
1
CN3 1
(WHT) 2
TABV
TABW
3
t°
TH8
1
CNAC2
(RED)
TABR
RED
TABS WHT
2
E3
IPM
5
CN2
(WHT)
CB2
CB3
1
NAME
Terminal Block<M-net connection>
Connector<Transmission>
Connector<Power Supply>
Connector<M-NET communication>
Switch<Status of communication>
Switch<Address setting : 1s digit>
Switch<Address setting : 10s digit>
LED<Power Supply : DC5V>
LED<Connection to Outdoor Unit>
LED<Transmission : Sending>
LED<Transmission : Receiving>
LED<Power Supply : DC12V>
2
2
7
SYMBOL
TB7
CN5
CND
CN2M
SW1
SW11
SW12
LED1
LED2
LED3
LED4
LED5
E2
CB1
2
CN5
(RED)
PFC
M-NET ADAPTER
1
52C
BLK
WHT
P. B.
N. F.
NO
RED
W V
CND
(WHT)
3 1
CN31
1 2
5
F3
CNAC
(WHT)
1
SW6
3
2
F2
1
1
CNVMNT CNMNT
(WHT) (WHT)
1
CNDC
(PNK)
3
6
SW1
LED2
CN2
(WHT)
LEV-A
(WHT)
LED4
CNDM
(WHT)
1
1 2
TH3
(WHT)
SW12
LED3
+1
CN51
(WHT)
4
SW4 SWP SW8 SW5
1
LED1
1 2
TH32 TH7/6
(BLK) (RED)
3
CNS
(WHT)
LED2
t°
1
1
5
SW11
SW1
1
LED5 CN2M
(WHT)
LED1
t°
5
+1
CNF1
7 (WHT)
1
MF1
MS
3~
t°
3
SW9 SW7
C. B.
5
M
TH32 TH7 TH6 TH3
CN5
(WHT)
63H
1
+1 MODEL SELECT
The black square (■) indicates a switch position.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+2. SW5-1 to 4 : Function switch
ON
OFF
ON
OFF
CNAC1
(WHT)
1 2 3 4 5 6
U
1 2 3 4 5 6
1 2 3 4 5 6
L1
L2 GR
POWER SUPPLY
208 / 230V 60Hz
OCH481A
LI
BRN
ON
PUY-A18NHA4 OFF
ON
OFF
ORN
ON
PUY-A12NHA4 OFF
1 2 3 4 5 6 7 8
YLW
ON
OFF
+2
U
EI
NI
CY1
CY2
GRN
PUZ-A18NHA4
3
SW5-5.6
BLU
SW6
RED
MODEL
S1
S2
S3 TB1
INDOOR
UNIT
+Use copper supply wires.
16
Page 31 of 36
7
WIRING DIAGRAM
PKA-A12HA4
PKA-A18HA4
[LEGEND]
Symbol
I.B
CN2L
CN30
CN32
CN41
CN51
CN90
CN105
CN152
FUSE
LED1
LED2
LED3
SW1
SW2
SWE
RFI
Name
Indoor controller board
Connector (LOSSNAY)
Connector (LLC)
Connector ( Remote switch)
Connector (HA terminal-A)
Connector (Centrally control)
Connector (Remote operation adapter)
Connector (Radio frequency interface)
Connector (Back-up heating)
FUSE(T3.15AL250V)
Power supply (I.B)
Power supply (R.B)
Transmission (Indoor-outdoor)
Switch (Model selection) +See Table 1
Switch (Capacity code) +See Table 2
Connector (Emergency operation)
Radio frequency interface for RF thermostat
Symbol
M
MS
S.W
SWE2
TB2
TB4
TB5
TH1
Name
Vane motor
Fan motor
Switch board
Emergency operation
Terminal block (Indoor unit Power (option))
Terminal block (Indoor/outdoor connecting line)
Terminal block (Remote controller transmission line)
Room temp. Thermistor
(32°F/15!", 77°F/5.4!" Detect)
TH2
Pipe temp. Thermistor/liquid
(32°F/15!", 77°F/5.4!" Detect)
TH5
Cond./eva. temp. Thermistor
(32°F/15!", 77°F/5.4!" Detect)
W.B
Pcb for IR wireless remote controller
LED1
LED (Operation indication : Green)
LED2
LED (Preparation for heating : Orange)
REC1 Receiving unit
OPTION PART
Wired remote controller board
R.B
Terminal block (Remote controller transmission line)
TB6
MS
3~
<Table 1>
SW1
(MODEL SELECTION)
I.B
1
CNMF 6
(WHT) FUSE
DB1
SWE
LED2
1
Refer to
tables
1and 2
1 2
CN2L
(RED)
1
1
1
5
CN41
(WHT)
10
CN152
(WHT)
CN151
(WHT)
9
CN90
(WHT)
CN20
(RED)
1 2
1
CN44
(WHT)
4
BLK
3
X1
1
CNP(BLU)
CN3C 3
(BLU) 1
LED3
1 CN32 3
(WHT)
1
CN51
(WHT)
LDSWE (A)
(BLU)
5
CNRU
(WHT)
2
4
1
4
CN105
(RED)
1
5
CN22
(BLU)
1
2
<+1>
TO
OUTDOOR
UNIT
6
SETTING
1 2 3 4 5
ON
OFF
<Table 2>
SW2(CAPACITY CODE)
ORN
BRN
S.W
LDSWE (B) SWE2
1 CN30 3
(BLK)
CN4F
(WHT)
TB4
YLW
S1
ORN
S2
S3
YLW
ORN
CN01
(BLK)
LED1
ON
OFF
1
3
5
W.B
LED2
TB5
1
2
2
SETTING
PKAA12HA4
1 2 3 4 5
PKAA18HA4
1 2 3 4 5
ON
OFF
ON
OFF
The black square ( ) indicates
a switch position.
RU
LD101 (B) REC1
LED1
MODELS
R.B
1
2
TB6
5
M
RFI
t°
TH1
t°
t°
TH2 TH5
Notes:
1. SymboIs used in wiring diagram above are,
: Connector,
: Terminal (block).
2. Indoor and outdoor connecting wires have poIarities, make sure to match terminal numbers (S1, S2, S3) for correct wirings.
3. Since the outdoor side electric wiring may change, be sure to check the outdoor unit electric wiring diagram for servicing.
4. This diagram shows the wiring of indoor and outdoor connecting wires. (specification of 230V), adopting superimposed
system of power and signal.
+1 : Use copper supply wires.
10
Page 32 of 36
SECTION 6
WARRANTY
Page 33 of 36
Mitsubishi Electric Mr. Slim® Split Air-conditioner and Heat-pump Systems
LIMITED WARRANTY
MEUS warrants as follows to the original owner of this Mr. Slim product that, if purchased from and installed by a contractor
licensed for HVAC installation under applicable local and state laws within the continental United States, Alaska and Hawaii,
should it prove defective by reason of defects arising from improper workmanship and/or material:
A. FIVE YEAR ON PARTS. The parts are warranted for a period of five (5) years to the original end-user of this System. If
it should prove defective due to improper workmanship and/or material for a period of five (5) years from the date of
installation, MEUS will replace any defective part without charge for the part. Replacement parts are warranted for the
remainder of the original 5-year warranty period. Parts used for replacement may be of like kind and quality and may be new
or remanufactured. Defective parts must be made available to MEUS in exchange for the replacement part and become the
property of MEUS.
B. ADDITIONAL TWO-YEAR COMPRESSOR WARRANTY. The compressor is warranted for a total period of seven
(7) years to the original end-user of this System. If it should prove defective due to improper workmanship and/or material for
a period of seven (7) years from the date of installation, MEUS will replace any defective compressor without charge for the
compressor. Replacement compressors are warranted for the remainder of this warranty period. Compressors used for
replacement may be of like kind and quality and may be new or remanufactured. Defective compressors must be made
available to MEUS in exchange for the replacement compressor and become the property of MEUS.
C. NO LABOR. THESE LIMITED WARRANTIES DO NOT INCLUDE LABOR or any other costs incurred for service,
maintenance, repair, removing, replacing, installing, complying with local building and electric codes, shipping or handling, or
replacement of the System, compressors or any other parts. For items that are designed to be maintained or replaced by the
owner, the owner is solely responsible for all labor and other costs of maintaining, installing, replacing, disconnecting or
dismantling the System and parts (such as filters or belts) in connection with owner-required maintenance. Air filter cleaning
and/or replacement for each applicable indoor unit are owner-required maintenance, and labor for this procedure is not
covered under warranty. Please consult the applicable technical documentation for air filter cleaning and other maintenance
procedures.
D. Proper Installation. This Limited Warranty applies only to Systems that are installed by contractors who are licensed for
HVAC installation under applicable local and state law, and who install the Systems in accordance with (i) all applicable
building codes and permits; (ii) MEUS’s installation and operation instructions; and (iii) good trade practices.
BEFORE REQUESTING SERVICE, please review the applicable technical documentation to insure proper installation and
correct customer control adjustment for the System. If the problem persists, please arrange for warranty service.
1. TO OBTAIN WARRANTY PARTS SERVICE:
(a) Contact the licensed contractor who installed the System or the nearest licensed contractor, dealer or distributor
(whose name and address may be obtained on our website at www.mehvac.com) of any defect within the applicable warranty
time period.
(b) Proof of the installation date by a licensed contractor is required when requesting warranty service. Present the
sales receipt, building permit or other document which establishes proof and date of installation. Otherwise, this Limited
Warranty shall be deemed to begin one hundred twenty (120) days after the date of manufacture stamped on the System. THE
RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS
LIMITED WARRANTY. However, please return the Owner Registration Card so that MEUS can contact you if a question
of safety arises.
(c) This Limited Warranty applies only while the System remains at the site of the original installation and only to
locations within the continental United States, Alaska and Hawaii.
2. THIS LIMITED WARRANTY DOES NOT COVER: property damages, malfunction or failure of the System, or
personal injury caused by or resulting from: (a) accident, abuse, negligence or misuse; (b) operating the System in a corrosive
or wet environment containing chlorine, fluorine or any other hazardous chemicals; (c) installation, alteration, repair or service
by anyone other than a licensed contractor or other than pursuant to the manufacturer’s instructions; (d) improper matching of
System components; (e) improper sizing of the System; (f) improper or deferred maintenance contrary to the manufacturer’s
instructions; (g) physical abuse to or misuse of the System (including failure to perform any maintenance as described in the
Operation Manual such as air filter cleaning, or any System damaged by excessive physical or electrical stress); (h) Systems
that have had a serial number or any part thereof altered, defaced or removed; (i) System used in any manner contrary to the
Page 34 of 36
Revised July 2009
Operation Manual; (j) freight damage; or (k) damage caused by force majeure or other factors such as power surge damage
caused by lightning and fluctuations in or interruptions of electrical power.
3. THIS LIMITED WARRANTY ALSO EXCLUDES: (a) SERVICE CALLS WHERE NO DEFECT IN THE SYSTEM
COVERED UNDER THIS WARRANTY IS FOUND; (b) System installation or set-ups; (c) adjustments of user controls; or
(d) Systems purchased or installed outside the continental United States, Alaska and Hawaii. Consult the operating instructions
for information regarding user controls.
4. This Limited Warranty shall not be enlarged, extended or affected by, and no obligation or liability shall arise or grow out
of, MEUS providing, directly or indirectly, any technical advice, information and/or service to Owner in connection with the
System.
5. EXCEPT AS OTHERWISE PROVIDED IN THIS LIMITED WARRANTY, MEUS MAKES NO OTHER
WARRANTIES OF ANY KIND WHATSOEVER REGARDING THE SYSTEM. MEUS DISCLAIMS AND
EXCLUDES ALL WARRANTIES NOT EXPRESSLY PROVIDED HEREIN AND ALL REMEDIES WHICH, BUT
FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR
ANY PARTICULAR PURPOSE. NO ONE IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN ANY
RESPECT OR TO CREATE ANY OTHER OBLIGATION OR LIABILITY FOR MEUS IN CONNECTION WITH
THE SYSTEM. MEUS DISCLAIMS ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF
ALL THIRD PARTIES (including, without limitation, the installing contractor) IN CONNECTION WITH OR
RELATED TO THE SYSTEM.
6. UNDER NO CIRCUMSTANCES SHALL MEUS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST GOODWILL, LOST REVENUES
OR PROFITS, WORK STOPPAGE, SYSTEM FAILURE, IMPAIRMENT OF OTHER GOODS, COSTS OF
REMOVAL AND REINSTALLATION OF THE SYSTEM, LOSS OF USE, INJURY TO PERSONS OR PROPERTY
ARISING OUT OR RELATED TO THE SYSTEM WHETHER BASED ON BREACH OF WARRANTY, BREACH
OF CONTRACT, TORT OR OTHERWISE, EVEN IF MEUS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. IN NO EVENT SHALL MEUS’S LIABILITY EXCEED THE ACTUAL PURCHASE PRICE OF
THE SYSTEM WITH RESPECT TO WHICH ANY CLAIM IS MADE.
7. Some states do not allow limitations on warranties or exclusions or limitation of damages, so the above
limitations or exclusions may not apply.
8. This Limited Warranty gives the owner specific legal rights and the owner may also have other rights that
vary from state to state.
9. This Limited Warranty is valid only in the continental United States, Alaska and Hawaii, and it is not transferable.
MITSUBISHI ELECTRIC & ELECTRONICS USA, INC.
HVAC Advanced Products Division
3400 Lawrenceville-Suwanee Road
Suwanee, GA 30024-9928
Revised July 2009
Page 35 of 36
SECTION 7
I, O & M MANUALS
SUBMITTED UNDER SEPARATE COVER
Page 36 of 36