Bush BCR35DABRED Instruction manual

BCR35DAB
Introduction
Thank you for buying this BUSH product, which is designed to give you many years of
trouble-free service.
You may already be familiar with using a similar unit, but please take time to read these
instructions. They are designed to familiarise you with the unit's many features and to
ensure you get the very best from your purchase.
Safety is important
Your safety and the safety of others is important.
Please therefore, ensure you read the "Safety Instructions" before you operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the below free
phone number to discuss the problem with one of our qualified service engineers
Bush Warranty: 1300 055 518
-2-
BCR35DAB
Safety Instructions
Ensure that you read all of the safety instructions before using this unit.
Safety Considerations
Position the power cable and other connected cables so that they are not likely to
be walked on, pinched or where items can be placed on or against them.
Do not use the unit in humid or damp conditions.
Do not allow the unit to get wet.
Never allow children to insert foreign objects into holes or slots on the unit.
The ventilation should not be impeded by covering the openings with items such as
newspapers, tablecloths, curtains, etc. This may cause overheating.
No naked flame sources, such as lit candles, should be placed on the unit.
Do not expose the unit to dripping or splashing, and no objects filled with liquids,
such as vases, should be placed on the apparatus.
Do not place the unit in closed bookcases or racks without proper ventilation.
Cleaning
Disconnect the unit from the mains supply before cleaning.
Do not use any liquids or aerosol cleaners, as this may damage the unit. Use a soft,
dust free cloth.
Servicing
There are no user serviceable parts in the unit. When servicing, refer to qualified
service personnel.
Consult your dealer if you are ever in doubt about the installation / operation / safety
of the product.
-3-
BCR35DAB
CONTENTS
Introduction ...................................................................................2
Safety Instructions ........................................................................3
Contents... ....................................................................................4
Location Controls .........................................................................5
Preparation For Use .....................................................................6
Main Operation..............................................................................6
DAB+ Operation......................................................................7 - 11
FM Operation........................................................................12 - 13
Auxiliary Input ..............................................................................14
System Setting ............................................................................15
Factory Reset ..............................................................................15
Alarm Time Setting ......................................................................16
Snooze Function .........................................................................16
Backlight Dimmer.........................................................................17
Sleep Function ............................................................................17
Troubleshooting / Technical Specification ...................................17
Warning . .....................................................................................18
-4-
BCR35DAB
Location Controls
FRONT VIEW
1
2
1. DISPLAY
2. SPEAKER
3. INFO
4. PRESET
5. SCAN
6. ALARMS
7. MODE
8. POWER ON/OFF
9. VOL10. < BUTTON
11. VOL+
12. > BUTTON
13. MENU
14. SELECT
15. SNOOZE
TOP VIEW
3
7
9
8
5
4
10
11
12
6
13
14
15
BACK VIEW
16. DC POWER
INPUT
17. AUXILIARY INPUT
18. HEADPHONE OUT
19. DC 5V OUT
20. ANTENNA
16 17
18
-5-
19 20
BCR35DAB
Preparation For Use
Power Source
This unit is supplied with an AC adaptor; follow these steps to connect the Power Source.
1. Unwind the power cord of the AC adaptor to its full length.
2. Connect the small end of the AC adaptor to the DC socket
on the left side of the unit.
3. Then plug the AC adaptor into the AC outlet (AC100-240V~,
50/60 Hz). Connecting this system to any other power source
may cause damage to the system. For sufficient ventilation,
keep other objects at least 10cm away from the unit.
4. To switch the unit off completely, turn the power off at the
wall outlet and unplug the ac adaptor.
AC Outlet
AC Adaptor
DON'T FORGET!
1. Do not touch the AC adaptor with wet hands.
2. Once connected to the power supply, the unit will switch directly to DAB+ mode.
3. Please disconnect the AC adaptor from the power supply if the appliance is not
going to be used for a long period time.
Using for Main Operation
Switching On
Press the " " button to power on the unit.
Press the " " button again to switch to standby mode.
Adjusting the Volume
1. To increase the volume, press the VOL+ button.
2. To decrease the volume, press the VOL- button.
Adjusting the Antenna
The antenna should be extended to ensure good reception in both FM and DAB+ modes.
It may be necessary to alter the position of the unit and/or antenna to achieve the best
signal.
DON'T FORGET!
Make sure the antenna is at full length for good reception.
-6-
BCR35DAB
DAB+ Operation
Listening to DAB+ Radio
1. Press the " " button to turn the unit on.
2. Press the MODE button to select the DAB mode.
3. Press the SCAN button, the following screen will be displayed. A bar graph indicating
the progress of the DAB+ station search. The number of stations found increases as
the scan progresses.
Volume bar
DAB
DAB Mode display
Number of stations found
Progress bar
DON'T FORGET!
To improve reception, try adjusting the position of the antenna.
Changing DAB+ Stations
1. Press the " < " & " > " buttons to scroll through the stations in the station list.
3. The radio will tune to the new station.
DON'T FORGET!
If no new station is selected the unit will display the currently playing station after
5 seconds.
From time to time new DAB+ stations may be added to the DAB+ station list. If
you wish to see if any new stations have been added, press the SCAN button to
activate a full scan.
Storing DAB+ Presets
1. You can preset up to 10 DAB+ stations for easy access as follows:
2. Press the " < " & " > " buttons to scroll through the stations in the station list.
3. Press the SELECT button to confirm to the station you wish to preset.
4. Press and hold the PRESET button, preset position 1 will show in the display.
5. Press the " < " & " > " buttons to select the required preset memory position.
6. Press the SELECT button to confirm.
7. Repeat steps 2-6 to store more preset stations.
-7-
BCR35DAB
DAB+ Operation
Selecting a Preset Station
1. Press the PRESET button briefly, preset position 1 will show in the display.
2. Use " < " & " > " buttons to select the desired preset and press the SELECT button
to confirm.
DON'T FORGET!
If you select a preset location that has not been programmed with a station,
"Not set" will be displayed. The unit will return to the previously selected station
after a few seconds.
Changing the DAB+ Station Information
It is possible to change the information displayed on
the second line of the display when listening to a
DAB+ station. There are seven types of information
available as listed below with examples to the right.
1. Dynamic Label Segment (DLS) This is scrolling
text information supplied by the DAB+ station.
It may comprise information on music titles or details
of the programme and is provided by the broadcaster.
2. Signal Bar Shows the transmission signal level.
3. Program Type (PTY) This is a description of the
type of programme provided by the DAB+ station
and is provided by the broadcaster.
4. Multiplex Name This will show the multiplex that
is broadcasting the programme you are listening.
5. Time/ Date This displays the time and date provided
by the broadcaster.
6. Channel and Frequency This displays the channel
number and the transmission frequency.
7. Signal Information This shows the digital bit-rate
and the signal mode.
DAB
AM
1
2
Press INFO button
DAB
AM
1
2
Press INFO button
DAB
AM
1
2
Press INFO button
DAB
AM
1
2
Press INFO button
DAB
AM
1
2
01 01 2013
Press INFO button
DAB
AM
1
2
Press INFO button
DAB
AM
1
2
Press INFO button
-8-
BCR35DAB
DAB+ Operation
Using the MENU Control (DAB+ mode)
The MENU control allows you to change some of the system options on your unit.
These options are arranged in a menu structure as shown below.
DAB
AM
1
2
Press MENU buttons
DAB
DAB
AM
1
AM
2
1
2
Press SELECT button
Press " < " & " > " buttons
DAB
DAB
AM
1
AM
2
1
2
Press SELECT button
Press the " < " & " > " button
to cloose radio frequency,
Press SELECT button to confirm.
Press " < " & " > " buttons
DAB
DAB
AM
1
AM
2
1
2
Press SELECT button
Press " < " & " > " buttons
Press the " < " & " > " button
to cloose DRC off / high / low,
Press SELECT button to confirm.
DAB
DAB
AM
1
AM
2
1
2
Press SELECT button
Press " < " & " > " buttons
Press the " < " & " > " button
to cloose Prune No / Yes,
Press SELECT button to confirm.
-9-
BCR35DAB
DAB+ Operation
Using the Menu
Press the MENU button to enter the menu. Press the " < " & " > " buttons to scroll
through the options described below.
Full Scan
1. Press the MENU button to access the menu.
2. Press the " < " & " > " buttons until "Full scan" is displayed.
3. Press the SELECT button to activate a full scan for DAB+ stations.
Manual Tune
It is possible to manually tune to a specific channel/frequency and add this to the station
list. This function can be used to obtain the optimum reception for a specific channel/
frequency.
1. Press the MENU button to access the menu.
2. Press the " < " & " > " buttons until "Manual tune" is displayed. Press the SELECT
button to select.
3. Press the " < " & " > " buttons to select the desired channel/frequency.
4. Press the SELECT button, a rectangle will be displayed on the second line of the
display. The position of this rectangle indicates the signal strength (the further towards
the right, the greater the signal strength).
DAB
AM
1
5. Adjust the position of the wire antenna to obtain the optimum signal strength.
6. Press the SELECT button to confirm.
- 10 -
BCR35DAB
DAB+ Display Modes
Dynamic Range Control (DRC)
DRC adds or removes a degree of compression to compensate for the differences in
the dynamic range between radio stations. For example, a station broadcasting popular
music may have a high level of compression applied since the emphasis is on a constant
high listening level. Where as a station broadcasting classical music will have little or no
compression as the listener requires all of the highs and lows in the music to define the
detail.
There are three levels of compression:
DRC off = No compression applied
DRC high = Maximum compression applied
DRC low = Low compression applied
The best way to determine which of these settings suits you best is to experiment with
them on a variety of source material.
1. Press the MENU button to access the menu.
2. Press the " < " & " > " buttons until "DRC" is displayed.
3. Press the SELECT button to select.
4. Press the " < " & " > " button to select between the three DRC values.
The available options appear on line 2 of the display. When the required DRC value is
displayed, press the SELECT button to confirm.
You should be able to hear the difference in compression immediately.
Station Prune
The Station Prune function allows you to remove stations from the station list that are
not active or cannot be received. These stations usually appear in the display with a "?".
1. Press the MENU button to access the menu.
2. Press the " < " & " > " buttons until "Prune" is displayed.
3. Press the SELECT button to select.
4. Press the " < " & " > " buttons to highlight either No or Yes.
5. Press the SELECT button. If you have chosen to prune the station list, the unwanted
stations will be deleted.
- 11 -
BCR35DAB
FM Operation
Using the FM Radio
1) Press the " " button to turn the unit on.
2) Press the MODE button to select FM mode.
DON'T FORGET!
You may hear background noise as no station has been tuned in. The display will
show the frequency of the FM station.
Automatic Tuning
Press the SCAN button or hold the " < " & " > " buttons to automatically search for the
next available station.
If the reception is poor, try Manual Tuning (see Manual Tuning below) to fine-tune the
station.
Volume bar
STEREO
FM
AM
STEREO display(Auto)
FM Mode display
Progress bar
DON'T FORGET!
If the reception does not improve, try altering the position of the antenna.
If the reception is still poor, scan again to determine whether a stronger signal
exists for the desired frequency.
Manual Tuning
Press the " < " & " > " buttons briefly to manually tune through the frequency band.
The frequency will increase or decrease in steps of 0.05 MHz for each press the " < "
& " > " buttons.
Stereo / Mono Select (FM mode)
Press the SELECT button to change the station STEREO (Auto) or MONO option.
Storing FM Presets
You can preset up to 10 FM stations for easy access. The procedure for storing and
recalling FM presets is the same as when using DAB mode and is described on page 7.
- 12 -
BCR35DAB
FM Operation
Changing the FM Station Information
It is possible to change the information that is displayed on the second line of the display when
listening to an FM station. There are four types of information available as listed below with
examples to the right.
Station Name This is information of the station
name / frequency of the current FM station.
Press INFO buttons
STEREO
AM
FM
Program Type (PTY) This is a description of the type
of programme provided by the FM station and is
provided by the broadcaster.
Press INFO buttons
Time / Date This displays the time and the date
provided by the broadcaster.
Radio Text This is scrolling text information supplied
by the FM station. It may comprise information on
music titles or details of the programme and is
provided by the broadcaster.
STEREO
AM
FM
Press INFO buttons
STEREO
AM
JAN 01 2013
FM
TUE
Press INFO buttons
STEREO
AM
- 13 -
FM
BCR35DAB
Auxiliary Input
AUX In Connection
Connect a 3.5mm stereo audio lead (not included) to the AUX-IN socket on the unit and
the other end to an auxiliary device such as an MP3 player.
Press the " "button to turn on the unit.
Press the MODE button to select AUX mode. The display will show "AUX
AM
1
AU;
2
The unit is now set up to play your auxiliary device.
Adjust the volume level by pressing the VOLUME buttons on the unit.
- 14 -
BCR35DAB
System Setting
Using the MENU Control (STANDBY mode)
The MENU control allows you to change some of the system options on your unit.
These options are arranged in a menu structure as shown below.
Z ZZ
SNOOZE
1
2
AM
PM
DAB
FM
AUX
JAN 01 2013
STEREO
TUE
In DAB+ mode, the time and date is set automatically
and is always accurate.
If you wish to manually set the time and date, follow the
sequence shown below.
Press MENU button
1
1
Press the " < " & " > " Button
to choose 12/24 hour format.
Press SELECT button
1
1
Press the " < " & " > " Button
to set hour / minute time.
Press SELECT button
1
1
Press the " < " & " > " Button
to set correct Year.
Press SELECT button
1
1
Press the " < " & " > " Button
to set correct Month.
Press SELECT button
1
1
Press the " < " & " > " Button
to set correct Day.
Press SELECT button
Factory Reset
This setting will restore the factory default settings of the unit.
1. Press and hold the MENU button,"Press SELECT key to Reset" will show in the display.
2. Press the SELECT button to select Reset.
- 1 -
BCR35DAB
Alarm Time Setting
Setting the Alarm
There are 2 alarms available which allow you to wake to DAB/ FM / %8==(5PRGH
1. Press the " " button to turn the unit to standby mode.
2. Press the ALARMS button to select alarm1 or alarm2 setting mode.
3. Press the SELECT button to enter the alarm setting mode.
4. Use the " < " & " > " buttons to adjust the alarm HOURS and press the SELECT button
to confirm.
5. Use the " < " & " > " buttons to adjust the alarm MINUTES and press the SELECT button
to confirm.
6. Use the " < " & " > " buttons to select the wake up source. Press the SELECT button
to confirm.
7. The alarm will now be active and the alarm icon will show in the display.
8. The alarm will automatically turn off after one hour if no buttons are pressed.
Turning the alarm ON or OFF
In standby mode, press the ALARMS button to select alarm 1 or alarm 2. Press and
hold the ALARMS button to activate the alarm and press and hold the button again to
deactivate the alarm.
DON'T FORGET!
Make sure the volume is set as desired before setting the alarm.
If you wish to be woken up by radio, ensure that a radio station is tuned.
Turning off the alarm
When an alarm sounds, press the " " button once to turn off the alarm.
The alarm will be repeated each day at the set time until it is deactivated.
Snooze Function
Snooze Function
When the alarm sounds, pressing the SNOOZE button will temporarily silence the alarm
for 10 minutes.
- 1 -
BCR35DAB
Backlight Dimmer
Press the SNOOZE button to select the backlight dimmer level. There are levels
RIdimmer settings.
Sleep Function
Sleep Function
Whilst listening to the unit, press and hold the INFO button until the sleep time shows
on the display. The unit will continue to play the music for 90 minutes before automatically
switching off.
Change the SLEEP Time
1. During operation, press and hold the INFO button until the sleep time shows on the
display.
2. Use the " < " & " > " buttons to select 90, 60, 30 or 15 minutes sleep time, or OFF.
Troubleshooting / Technical Specification
POSSIBLE
PROBLEM
No sound
The radio does not operate
when you press any buttons
REMEDY
Volume may not be adjusted. Increase the Volume level.
Disconnect your headphones
(Headphone Out) are
if connected.
connected.
Check and connect the power
Power is not correctly
properly.
connected.
Electrostatic discharge
Radio poor reception
Weak radio signal.
Interference from other
electrical items.
Turn off the unit, disconnect
the main power, reconnect
after a 60 seconds
Ensure the wire antenna is
fully extended.
Adjust the position of the antenna.
Move the radio away from
sources of interference.
Technical Specification
Power Consumption................................................................... 2W
Supply Voltage/Battery................................................................ 5V , 2A
DAB+.......................................................................................... BAND III 174 -240 MHz
FM............................................................................................... 87.5-108 MHz
Headphone Out ......................................................................... 3.5mm Stereo Jack
- 17 -
Warranty
Please keep your receipt as proof of purchase. This product is warranted for any defect
in materials or workmanship for one year after the original date of purchase. This product
is for normal domestic and office use only. This warranty does not cover damage from
misuse or neglect, accidental damage, vermin infestation, excessive voltages such us
lightning or power surges or any alternation that affects the performance or reliability of
the product.
In the unlikely event that your product fails to work normally, please contact the
Bush Warranty on DQGKDYH\RXUUHFHLSWRISXUFKDVHRQKDQG
This warranty is subject to the following provisions:
It is only valid within boundaries of the country of purchase
The product must be correctly assembled and operated in accordance with the
instructions contained in the manual
This product must be used solely for domestic purposes
The warranty does not cover accidental damage
The warranty will be rendered invalid if the product is resold or has been damaged by
inexpert repair
The manufacturer disclaims any liability for incidental or consequential damaged
This warranty is in addition to, and does not diminish, your statutory or legal rights.
PO BOX 6287
Silverwater NSW 1811
Bush Warranty: www.bushaustralia.com.au
- 18 -