advertisement
1-866-96-LEGEND
24 hours a Day/ 7 Days a week.
L4210
Contents
Safety and warnings...................................................................................... 2-4
Introduction................................................................................... ..............5
Installation.................................................................................................. 6-9
R emote Control............................................................................ ..............10
Operation.....................................................................................................11-14
Trouble Shooting.......................................................................................... 15
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8.Do not install near any heat sources such as radiators , stoves, or other apparatus (including amplifiers)that produce heat.
9.Protect the power cord from being walked on or pinched particularly at power outlets, and the point where they exit from the apparatus.
10.Only use attachments/accessories specified by the manufacturer.
11.Unplug this apparatus during lightning storms or when unused for long periods of time.
12.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate n ormally, or has been dropped.
13.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.
The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
WARNING:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
-2-
SAFETY AND WARNINGS
High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls.
Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of electrical components.
Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.
Do not trap the power supply cord under the television receiver.
-3-
Dim:515*320mm(
If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.
Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference.
INSTALLATION
Locate the TV in the room where light does not strike the screen directly .
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid extremely warm locations to prevent possible damage to the cabinet or premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz.
Never connect to a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
CAUTION
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or
CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel.
Earthing connection--The apparatus shall be connected to MAINS socket outlet with a protective earthing connection
MAINS plug or appliance coupler of the apparatus is used as disconnect device, it should remains readily operable
Warning: Change or modifications to this unit not expressly by the part responsible for compliance could void the user 's authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
SAFETY AND WARNINGS television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
-Consult the dealer or an experienced radio TV technician for help.
Shield cables must be used with this unit to ensure compliance with the Class B FCC limits.
-4-
INTRODUCTION
Main features
1920 x 1080 native resolution for Full-HD (1080p) performance
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home theater experience
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Full-function Remote Control
Main parameter
Viewing Picture Size(diagonal)
Resolution:
Aspect Ratio:
TV System:
Video Signal System:
Receiving Channel:
Power consumption:
Input Power Voltage:
Audio Output Power(THD 7%):
Rear High-Definition Multimedia Interface(HDMI) Input
Rear S-Video Input
YCb(Pb)Cr(Pr) Input
Rear Analog Audio Output
Rear Coaxial SPDIF Output
Analog RGB(VGA) Input
Rear Composite Video Input
Rear Audio Input
Side Composite Video Input
Side HEAD PHONE Output
Rear Composite Video Output
Horizontal definition(TV line)
AC Power Cord.........................
Infrared Remote Control...........
User s Manual ........................
Battery(AAA)..........................
1
1
1
2
42inch
1920x1080
16:9
ATSC Digital system and NTSC Analog system
NTSC/PAL/SECAM
Cable :1-135/ Air: 2-69(ATV&DTV)
300W
AC 100V-240V 50/60Hz
2x8W x 2 x 1 x 1 x 1 x 1 x 1 x 1 x 3 x 1 x 1 x 1
Composite Video Input >=350
Video Input
YCb(Pb)Cr(Pr)
>=400
>=400
-5-
INSTALLATION
Front panel Side panel
30 30
1
4
7
2 3
5 6
8 9 0
+
VOL
_
+
CH
_
1: Remote control sensor.
2: Indicator LED: GREEN
RED
3: Key board
POWER ON.
STANDBY.
3
1
2
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
HEADPHONE
HEADPHONR
VIDEO
Video
L
L
R
R
1 SOURCE Display the input source menu.
2 MENU D isplay main MENU.
3 CH+/CH-: In TV mode press CH+ or CHto change the channel up and down.In MENU mode, press
CH+ or CHto select items .
In standby mode, press CH+ or CHto turn on the TV.
4 VOL+/VOL-: Adjust sound level.In MENU mode, press VOL+ or VOLto adjust the item that you selected.
5.
STANDBY : Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
6.HEADPHONE OUTPUT
7.VIDEO INPUT
8.AUDIO INPUT-L
9.AUDIO INPUT-R
REAR AV Connection
1 2
AC INPUT
100-240V~50/60Hz
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1. HDMI1 INPUT
2. HDMI2 INPUT
3. VGA INPUT
4. AV1 INPUT
5. S-VIDEO INPUT
6. YPbPr INPUT
7. PC AUDIO INPUT
8. YPbPr AUDIO INPUT
9. AV1/S-VIDEO AUDIO INPUT
10. VIDEO OUTPUT
11.
SPDIF OUTPUT
12. AUDIO OUTPUT
13. ANT
14. AC POWER INPUT
Note:
1.AV1 and S-VIDEO share one audio channel.
2. When HDMI1 port get DVI signal, the PC Audio channel will change to receive the audio from HDMI1 port
3. When HDMI2 port get DVI signal, the YPbPr Audio channel will change to receive the audio from HDMI2 port.
4.AV OUTPUT :
When the source are AV1,AV2(side) S-VIDEO,ATV,the AV OUTPUT Channel reproduce the input signals accordingly
-6-
INSTALLATION
PC
STEPS:
Be sure both the TV and computer are set to Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to VGA mode.
4.Power on the VGA.
This sequence is very important.
1 2
AC INPUT
100-240V~50/60Hz
VGA cable
Power cord
PC Audio
3
4
1
2
5
6
10
11
12
13
7
8
9
PRESET MODE
RESOLUTION
720*400
640*480
640*480
640*480
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
1280*1024
V.Freq.(Hz)
70
60
72
75
56
60
70
75
60
75
72
75
60
-7-
H.Freq.(KHz)
31.47
31.47
37.86
37.50
35.156
37.88
48.08
46.88
48.36
56.48
60.02
63.98
80.00
ANTENNA
INSTALLATION
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
-8-
INSTALLATION
AV EQUIPMENT
This TV provides two groups of AV ,one S-Video,one group of YPbPr for convenient connection to VCR,DVD or other video equipment,three group of HDMI for HD signal input Please refer to the owner s manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
With VIDEO terminal
To audio
Output
With VIDEO Input Terminal
VIDEO EQUIPMENT
To video output
W R Y TO VIDE O
Input
To audio Input
W R
Y R W
Y
HDMI
1 2
AC INPUT
100-240V~50/60Hz
G B R
W R
R W
Y
From Coaxial SPDIF output
G B R
W R
R Pr
G Y
B Pb
VIDEO EQUIPMENT with YPbPr
To audio outputs
To s-video output with SPDIF Input terminal with S-video
Terminal
VIDEO EQUIPMENT
Y/C Black (s-video)
W White(audol L)
R Red(audio R)
VIDEO RECORDER
HEADPHONE
Video
L
R
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc.....
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.
-9-
3
4
5
6
7
8
9
10
20
21
25
26
27
28
1
2
POWER MUTE
1
4
7
MENU
2
5
8
RECALL
3
6
9 0
SOURCE
11
12
13
14
ENTER
EXIT
+
VOL
_
S.M
MTS/SAP
P.M
ASPECT
TV DISPLAY
+
CH
_
SLEEP P.G
CC
CH LIST FAV EPG
TV AV SVIDEO HDMI
YPbPr VGA
PAGE UP PAGE DOWN
EPG
15
16
17
18
19
22
23
24
29
30
Insert Batteries Into the Remote Control
1 2 3
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.
Remark:
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.
REMOTE CONTROL
1: POWER
2:
To set the TV standby or on.
NUMBER KEY :
For direct access to program.
3: MENU
To display TV menu or to return to the previous menu.
4: CURSOR
To move within the menu.
5: EXIT
6:
Used to exit menu.
VOL+/-
To adjust sound level.
7: P .M
To switch picture mode.
8: MTS/SAP
Switch the sound stereo, SAP and mono.
9: SLEEP
Set time to turn off the TV.
10: P.G
Setting the Parental Control level control.
11: MUTE
To disable or enable the sound.
12: RECALL
To access the previously viewed program.
13: SOURCE
To display or exit TV input source menu.
14: ENTER
Confirms selection.
15: TV DISPLAY
Displays/removes the program Information
16: S.M
To switch sound mode.
17: CH+/CH-
To access the next or previous Program.
18: ASPECT
To change picture aspect .
19: CC
Enable or disable the CC function.
20: CH LIST:
Used to display the channel list
21: FAV :
Used to access your favourite channels in digital TV mode.
22: EPG :
Display all the information of DTV programs.
23.
HDMI:
Hot key directly go to HDMI source.
24: SVIDEO:
Hot key directly go to SVIDEO source.
25: TV:
Hot key directly go to TV source.
26: AV:
Hot key directly go to AV source.
27: YPbPr:
Hot key directly go to YPbPr source.
28: VGA:
Hot key directly go to VGA source.
29: PAGE DOWN/PAGE UP
In EPG mode, use this key to page up/down the EPG information.
30.
COLOR KEYS: Reserved keys
-10-
1. PICTURE MENU
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast, brightness, etc.
Press to select, press to exit.
to adjust, press MENU
Picture Audio
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Select
Timer Setup P.G
Standard
Adjust
Channel
Normal
Menu Exit
50
50
50
0
50
Note:
If you want to adjust contrast, brightness, color, and sharpness , the picture mode must return to personal status.
2.AUDIO menu
The second item of the MENU is AUDIO MENU.
You can adjust sound here.
Press to select, press to exit.
to adjust, press MENU
Picture
Audio
Sound mode
Bass
Treble
Balance
Surround
AVC
SPDIF Type
Audio language
Select
Timer Setup P.G
Standard
Adjust
Channel
Off
Off
PCM
English
Menu Exit
50
50
50
Note:
The item of Audio language is available in ATSC program.
OPERATION
3.TIMER MENU
The third item of the MENU is TIMER MENU.
You can adjust time here.
Press to exit.
to select, press to adjust, press MENU
Picture
Audio
Sleep timer
Time zone
Daylight Saving Time
Clock
Timer Setup
P.G
Off
Pacific
Off
1999/12/31 04:03PM
Channel
Select Adjust Menu Exit
1).Sleep Timer: adjust this item , you can set the sleep timer .
Note:
The item of Time zone, the item of Daylight Saving
Time and the item of Clock are available in ATSC program
4. SETUP MENU
The forth item of the MENU is SETUP MENU.
You can setup system here.
Press to select, press to exit.
to adjust, press MENU
Picture
Audio
Menu language
Transparency
Aspect
Noise Reduction
Advanced
Closed caption
XVS
Restore Default
Select
Timer Setup P.G
English
On
16:9
Weak
Adjust
Off
Menu Exit
Channel
Note:
Restore Default: Reset all the settings to default value.
-11-
1). Advanced: In PC Mode is available.
Press button to select Advanced item , Press button, the screen will display as follow:
Picture
H-pos
V-pos
Clock
Phase
Auto
Audio Timer Setup
P.G
50
50
50
50
Channel
Select Adjust Menu Exit
(1).H-Pos:Adjust the horizontal position of the screen.
(2).V-Pos:Adjust the vertical position of the screen.
(3).Clock: Fine tune the screen width.
(4).Phase: Fine tune the phase of the screen. Usually don`t adjust this item.
(5).Auto: Auto adjust to fit the screen.
2). Closed Caption: switch close caption mode.
Press
Press button to select Closed Caption item, button, the screen will display as follow:
5.
P.G
MENU
Picture Audio
Enter password
OPERATION
The fifth item of the MENU is
You can setup Parental Control
Press to exit.
to select, press here.
MENU.
to adjust, press MENU
Parent Control: input the password, it will go into
Parental Control menu. Factory default password is 6666.
Timer Setup
----
P.G
Channel
Picture Audio
CC Mode
Basic Selection
Advanced Selection
Option
Timer
Setup P.G
Off
CC4
Service 3
Channel
Select Adjust Menu Exit
5.1 .Input the correct password ,the screen will display as follow:
Picture Audio
Change password
P.G switch
US
Canada
RRT setting
Reset RRT
Timer
Setup
On
P.G
Channel
Select Adjust Menu Exit
1). Change Password: Press button, the screen will display as follow:
Select Adjust Menu Exit
(1):Advanced Selection: only ATSC program is available.
(2):Option:Used to edit CC font.
Press button, the screen will display as follow:
Picture Audio
Mode
Font style
Font size
Font Edge style
Font Edge color
FG color
BG color
FG opacity
BG opacity
Select
Timer Setup
Adjust
P.G
Custom
Default
Default
Default
Default
Default
Default
Default
Default
Channel
Menu Exit
NOTE: Only ATSC program is available.
-12-
Picture Audio
New password
Confirm password
Timer Setup P.G
Channel
Select Adjust Menu Exit
1).New Password: Input the new password
2).Confirm Password: Input the new password again
OPERATION
5.2
.
When the Parental Control options can be adjusted.
switch is ON, the below
5.3
US: Press button, the screen will display as follow: switch:
Picture
TV
MPAA
Audio Timer Setup
X
P.G
Channel
Select Adjust Menu Exit
2).MPAA:switch the movie-rating control level: N/A,
G, PG, PG-13,R,NC-17,X.
Rating Description
G
PG
Age
PG-13
General audiences, All Ages admitted
Parental Guidance suggested. Some material may not be
Suitable for children.
Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
R
Restrict. Under 17 requires accompanying parent or adult guardian(age varies in some jurisdictions)
NC-17 No one 17 and under admitted.
X
X is an order rating that is unified with NC-17 but may be encoded in the data of order movies.
5.4 Canada: Press displayed as follow: button, the screen will be
1):TV: Press button, the screen will display as follow:
Picture Audio
Canada English
Canada French
Timer Setup
P.G
14+
E
Channel
Picture Audio
ALL
Timer
Setup
TV rating
FV V S L
P.G
D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Block
Select
Press ENTER to lock or unlock
Adjust Menu Exit
Channel
Rating Content
TV-Y (All children)
Suggested age
TV-Y7(Direct to order children)
TV-G(General audience)
TV-PG(Parental
Guidance suggested)
TV-14(Parents strongly cautioned)
TV-MA(Mature audience only)
FV
(Fantasy violence)
V
(Violence)
Content
S
(Sexual situation)
L
(Adult language)
D
(Sexually suggestive dialog)
X
X
X
X
X
X
X
X
X
X
X
X
And use ENTER key to switch lock/ unlock
Control feature.
Parental
Select Adjust Menu Exit
1): Canada English: switch the english rating control level:E,C,C8+,G,PG,14+,18+.
Rating Description
E
C
Exempt: Includes news, sports, documents and other information programming: talk shows, music videos, and variety programming.
Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of securityand well-being.
C8+ Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen .
Age
G General: Considered acceptable for all age groups, Appropriate viewing for the entire family, contains very little violence, physical, verbal or emotional.
PG Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues.
14+ Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline But it must be integral to the devel opment of plot or character. Language usage could be profane
18+ Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of secretary and nudity.
-13-
OPERATION
2).Canada French: switch the French-rating control level: E, G,8ANS+,13 ANS+,16ANS+,18ANS+.
Rating Description
Age
E
G
Exempt programming
General :All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner .
8ans+ General but inadvisable for young children :May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing with parent.
13ans+ Over 13 years: Could contain scenes of frequent violent scenes and in tense violence.
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.
5.5 RRT Setting: in ATSC digital TV mode, it could be adjusted
5.6 Reset RRT: Press displayed as follow: button, the screen will be
1). Air/Cable: select air TV signal or cable TV signal.
2). Auto Scan: If it's the first time using the TV, it should scan all the TV channels first, press the button to confirm, you will see below menu :
Picture Audio
Start to scan
Timer
Setup P.G
Select Adjust Menu Exit
A: Start to Scan: press the button to confirm, you will see below menu which indicates auto search is in process.
Channel
Picture
Audio Timer Setup P.G
Channel
Are you sure?
NO YES
Picture Audio Timer Setup P.G
Channel
RF CH:
FOUND:
4
0
Select Adjust Menu Exit
6. Channel MENU
The sixth item of the MENU is CHANNEL MENU.
You can adjust digital and analoge TV channel here .
Press to move, press to adjust.
Select Adjust Menu Exit
3). Favorite: Press favorite channel .
4). Show/Hide: Press button to choose/delete the
6). Channel Lable: Press channel name.
button to display or hide currently channel.
5). Channel NO. :Display the currently channel number.
button to edit currently
7). DTV Signal: Display DTV signal intension. It can't be selected and adjusted.
Picture Audio
Air/cable
Auto Scan
Favorite
Show/Hide
Channel NO.
Channel Lable.
DTV signal
Select
:
Timer Setup
Adjust
P.G
Cable
2-1
Menu Exit
Channel
-14-
Trouble shooting
Trouble phenomenon Symptom
Picture Audio
Snow Noise
Ghost
Inspection Check antenna position, direction or connection
Normal audio
antenna position, direction or connection
Interference
Normal Picture
No picture
No colour
Noise
Mute
Mute
electronic equipment,car/ motorcycle,fluorescent light
Volume(check if mute is activated or if the audio system connections are not correct)
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume setup
Press standby key on the remote control for inspecting
Normal audio
Colour control
Picture breaking up
Normal audio or weak
retune channel
No colour
Noise
TVsystem
The LCDTV panel is built with very high precision technology giving you fine picture details in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, black or white. Please note this does not affect the performance of the product.
-15-
-1-
-2-
-3-
Dim:515*320mm(
42
300
-5-
30 30
1
4
7
2
5
8
3
6
9
0
+
VOL
_
+
CH
_
3
1
2
Panel lateral
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
HEADPHONE
HEADPHONR
VIDEO
Video
L
L
R
R
1.
2.
3.
4.
5.
1 2
1 2 3 4 5
6.
7.
8.
9.
10.
6 7 8 9 10 11 12 13
11.
12.
13.
14.
AC INPUT
100-240V~50/60Hz
14
-6-
PC
1 2
AC INPUT
100-240V~50/60Hz
3
4
1
2
5
6
10
11
12
13
7
8
9
720*400
640*480
640*480
640*480
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
1280*1024
-7-
70
60
72
75
56
60
70
75
60
75
72
75
60
48.08
46.88
48.36
56.48
60.02
63.98
80.00
31.47
31.47
37.86
37.50
35.156
37.88
-8-
W R Y
1 2
Y
W R
Y R W
G B R
W R
R W
Y
HDMI
W
R Pr
G
B
Y
Pb
R
G B R
Y
W
R
HEADPHONE
Video
L
R
-9-
1
2
3
4
5
6
9
10
20
21
25
26
27
28
7
8
POWER MUTE
1
4
7
MENU
2
5
8
RECALL
3
6
9 0
SOURCE
11
12
13
14
ENTER
EXIT
+
VOL
_
S.M
MTS/SAP
P.M
ASPECT
TV DISPLAY
+
CH
_
SLEEP P.G
CC
CH LIST FAV EPG
TV AV SVIDEO HDMI
YPbPr VGA
PAGE UP PAGE DOWN
EPG
18
19
22
23
24
29
30
15
16
17
1 2 3
-10-
Picture
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Audio
Select
Timer Setup P.G
Standard
Adjust
Channel
Normal
Menu Exit
50
50
50
0
50
Picture Audio
Sleep timer
Time zone
Daylight Saving Time
Clock
Timer Setup
P.G
Off
Pacific
Off
1999/12/31 04:03PM
Channel
Select Adjust Menu Exit
Picture
Audio
Sound mode
Bass
Treble
Balance
Surround
AVC
SPDIF Type
Audio language
Select
Timer Setup P.G
Standard
Adjust
Channel
Off
Off
PCM
English
Menu Exit
50
50
50
Picture Audio
Menu language
Transparency
Aspect
Noise Reduction
Advanced
Closed caption
XVS
Restore Default
Select
Timer Setup P.G
English
On
16:9
Weak
Adjust
Off
Menu Exit
Channel
-11-
H-Pos
V-Pos
Clock
Phase
Auto
Picture
H-pos
V-pos
Clock
Phase
Auto
Audio Timer Setup
P.G
50
50
50
50
Channel
Select Adjust Menu Exit
1
2
Picture Audio
CC Mode
Basic Selection
Advanced Selection
Option
Timer Setup P.G
Off
CC4
Service 3
Channel
Select Adjust Menu Exit
Picture Audio
Mode
Font style
Font size
Font Edge style
Font Edge color
FG color
BG color
FG opacity
BG opacity
Select
Timer Setup
Adjust
P.G
Custom
Default
Default
Default
Default
Default
Default
Default
Default
Channel
Menu Exit
-12-
Picture Audio
Enter password
Timer Setup
----
P.G
Channel
Select Adjust Menu Exit
Picture Audio
Change password
P.G switch
US
Canada
RRT setting
Reset RRT
Timer Setup
On
P.G
Select Adjust Menu Exit
Channel
Picture Audio
New password
Confirm password
Timer
Setup
----
----
P.G
Channel
Select Adjust Menu Exit
Picture
TV
MPAA
Audio Timer Setup
X
P.G
Channel
Select Adjust Menu Exit
Picture Audio
ALL
Timer
Setup
TV rating
FV V S L
P.G
D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Block
Select
Press ENTER to lock or unlock
Adjust Menu Exit
Channel
X
X
X
X
X
X
X
X
X
X
X
X
G
PG
PG-13
R
NC-17
X
Picture Audio
Canada English
Canada French
Timer Setup
P.G
14+
E
Channel
Select Adjust Menu Exit
-13-
Picture Audio
Start to scan
Timer
Setup P.G
Channel
Select Adjust Menu Exit
Picture Audio
Timer
Setup
P.G
Channel
Are you sure?
NO YES
Select Adjust Menu Exit
Picture Audio Timer Setup P.G
Channel
RF CH:
FOUND:
4
0
Select Adjust Menu Exit
Picture Audio
Air/cable
Auto Scan
Favorite
Show/Hide
Channel NO.
Channel Lable.
DTV signal
Select
:
Timer Setup
Adjust
P.G
Cable
2-1
Menu Exit
Channel
-14-
-15-
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project