ADC D75 Parts Manual
Add to my manuals
37 Pages
ADC D75 is a versatile clothes dryer that is engineered to provide years of reliable operation. It features advanced safety precautions as well as a microprocessor control panel that offers intuitive operation. The dryer is equipped with a spacious basket that is supported by a sturdy frame, ensuring efficient tumbling action. It also includes a lint drawer and switch for easy maintenance. Various sensors, including a S.A.F.E. temperature probe, work together to ensure optimal drying performance while protecting your garments from damage.
advertisement
D-75
Parts Manual
031402JCARRITA/rmoles
J.L.A.
Meadowcroft Lane, Halifax Road
Ripponden W. Yorkshire, England
HX6 4AJ
Telephone: 1 422 822282 / Fax: 1 422 824390
ADC Part No. 450592
Retain This Manual In A Safe Place For Future Reference
J.L.A. products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. J.L.A. reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO.
D-75
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or J.L.A. When ordering replacement parts, you can FAX your order to J.L.A. at 1 422-824390 or telephone your order directly to the J.L.A. Parts Department at 1 422-822282. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents
Control Door Assembly
For Models Mfd. as of July 10, 2002 ................................................................................................. 2
Control Door Assembly
For Models Mfd. prior to July 10, 2002 ............................................................................................. 3
Phase 7 OPL Microprocessor Control Panel Assembly ........................................................................... 4
Phase 7 OPL Microprocessor Control Box Assembly ............................................................................. 5
Front Panel Assembly ............................................................................................................................. 6
Main Door “Steel” Assembly .................................................................................................................. 7
Main Door Switch Assembly ................................................................................................................... 8
Basket (Tumbler)/Support Assemblies ..................................................................................................... 9
Lint Drawer/Lint Drawer Switch Assembly ............................................................................................ 10
Idler Bearing Assembly ..........................................................................................................................11
Basket (Tumbler) Bearing Assembly ................................................................................................ 12, 13
Non-Reversing Motor Mount Assembly .......................................................................................... 14, 15
Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 16, 17
Sensor Bracket Assemblies ............................................................................................................. 18, 19
Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 20, 21
Hot Surface Ignition (HSI) Burner Assembly ................................................................................... 22, 23
Air-Operated Steam Damper Assembly .......................................................................................... 24, 25
Sail Switch Assembly ............................................................................................................................ 26
Rear Electric Relay Panel Assembly ...................................................................................................... 27
Reversing Electric Relay Panel Assembly ......................................................................................... 28, 29
S.A.F.E. Temperature Probe Assembly ................................................................................................. 30
S.A.F.E. Solenoid and Piping Assembly ................................................................................................ 31
Outer Top/Back Guard Assemblies ....................................................................................................... 32
Electrical Oven Component Application Chart ....................................................................................... 33
Additional Parts Available ..................................................................................................................... 34
2
Control Door Assembly
For Models Mfd. as of July 10, 2002
Illus. No.
Part No.
Qty.
Description
1 883576 1
6
7
8
2
3
4
5
150321
117604
150317
102502
154011
102603
102601
2
4
2
1
2
1
1
White OPL Control Door
(includes illus. nos. 1 and 3)
#10-32 x 1/2” Phillips Machine Screw
Neoprene Sponge Tape (sold by the foot)
#10-16 x 3/4” TORX + BTN Type 1
Control Door Support Rod
#10-32 Multi-Thread U-Nut
Control Door Rod Support Catch
Control Door Retainer Clip
Control Door Assembly
For Models Mfd. prior to July 10, 2002
3
Illus. No.
Part No.
Qty.
Description
1 883304 1
2
3
4
5
150314
117604
--------*
154011
4
2
1
4
White Control Door Assembly
(includes illus. nos. 1 and 3)
#10-32 x 1/2” TORX Plus
Noise Suppressor Tape (sold by the foot)
Logo
#10-32 Multi-Thread U-Nut
* Contact reseller for logo.
4
Phase 7 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
112571
850984
883301
883277
150005
153010
136016
136097
1
1
1
1
2
2
1
1
Phase 7 OPL Keyboard
Phase 7 Microprocessor Controller (computer) Panel ONLY
Phase 7 OPL Reversing Microprocessor Controller (computer) Control
Panel Assembly Complete
(includes illus. nos. 1 through 7)
Phase 7 OPL Microprocessor Controller (computer) ONLY
#6-32 x 3/4” Phillips Round Head Machine Screw
#6 Star Washer
5-Amp Fuse
500 mA Fuse
Phase 7 OPL Microprocessor Control Box Assembly 5
Illus. No.
Part No.
Qty.
Description
3
4
5
1
2
6
7
122681
122676
122646
122683
122640
122706
122669
1
1
1
1
1
*
*
10-Pin Connector
8-Pin Connector
2-Pin Connector
6-Pin Terminal
9-Pin Terminal
#20-16 U.M.N.L. Socket
Female Crimp Terminal
* As needed.
6
Front Panel Assembly
Illus. No.
Part No.
Qty.
Description
1 882905
2
3
4
5
6
150313
150318
--------
--------
881987
154215
1
1
White Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
11 #10-16 x 1/2” TORX +
1
1
25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)
Main Door Hinge
(refer to Main Door “Steel” Assembly on page 7)
Lint Drawer Switch
1
2
(refer to Lint Drawer/Lint Drawer Switch Assembly on page 10)
Friction Door Latch Kit
(includes illus. nos. 5 and 6)
5/32” Pop Rivet
Main Door “Steel” Assembly 7
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
11
12
13
14
15
7
8
9
10
881150
102354
170731
881152
150445
153031
881151
150445
150683
152014
151010
150120
150683
152014
881210
102211
170731
1
1
1
1
2
1
1
2
3
3
1
1
3
3
1
1
1
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Black Gasket Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16” Door Glass
Black Glass Adhesive (10.3 oz. cartridge)
8
Main Door Switch Assembly
Illus. No.
Part No.
Qty.
Description
4
5
6
1
2
3
7
150006
152013
153010
137005
122636
881211
881153
150301
2
1
1
1
2
2
2
2
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch
Flag Terminal
Black Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Basket (Tumbler)/Support Assemblies 9
Illus. No.
Part No.
Qty.
Description
1* 800985
883303
2
5
6
7
3
4
8
9
10
11
---
150313
150429
301423
150518
100905
153004
800613
152005
153005
153004
116000
401010
4
4
1
4
4
4
1
1
1
1
Basket (tumbler) ONLY without Felt Collar
Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
40 #10-16 x 1/2” TORX + Crimptite Screw
1 TORX Hand Driver (for removal of TORX head screw)
4
1
Stainless Steel Basket (tumbler) Rib ONLY
5/16-18 x 3/8” Socket Button Head Screw
3/8-16 x 37” Tie Rod
3/8” Flat Washer
Basket (tumbler) Support ONLY
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar
* Felt collar is not included and must be ordered separately.
10
Lint Drawer/Lint Drawer Switch Assembly
Illus. No.
Part No.
Qty.
Description
1 882871 1
2
3
4
5
6
7
8
9
117604
122116
122605
122701
122801
833123
304136
150301
122700
122604
7
1
1
*
1
1
1
2
*
1
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Gasket (sold by the foot)
Lint Drawer Switch
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 3 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
* As required.
Idler Bearing Assembly 11
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
100108
101140
100194
100109
154301
100705
882576
150617
153005
153004
801009
152004
150509
1
1
1
1
2
1
1
2
2
2
1
1
1
5L-680 V-Belt (basket [tumbler] to idler)
14” x 3” Compound Pulley
4L-720 V-Belt (idler to motor)
For Non-Reversing Models ONLY
4L-650 V-Belt (idler to motor)
For Reversing Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
12
Basket (Tumbler) Bearing Assembly
Basket (Tumbler) Bearing Assembly
Illus. No.
Part No.
Qty.
Description
12
13
14
15
16
17
18
19
7
8
9
5
6
10
11
3
4
1
2
20
21
22
23
24
880220
153025
152050
883387
102120
883386
100735
100724
101100
101118
101110
100108
150610
152004
882543
880779
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
1
4
4
1
1
1
2
2
2
2
2
2
2
2
4
6
4
1
1
1
1
1
1
1
1
2
2
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 18, 23 and 24)
Pillow Block Bearing Platform ONLY
1-3/8” Pillow Block Bearing
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet
Rotational Sensor Assembly
Shaft Key (for reversing models Only)
Shaft Key (for non-reversing models Only)
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1” Taper Lock Bushing (for reversing models Only)
5L-680 V-Belt (basket [tumbler] to idler)
5/16-18 x 1-1/2 Allen Setscrew
5/16-18 Hex Nut
13
14
Non-Reversing Motor Mount Assembly
Non-Reversing Motor Mount Assembly
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
100194
100701
101130
150501
153002
153001
181050
100068
122701
122801
137030
152004
153002
153001
117604
154000
850018
801824
153051
882670
100604
100702
153050
152006
1
1
1
4
4
4
1
1
8
1
1
4
4
4
4
4
1
1
1
1
1
1
2
2
4L-720 V-Belt (idler to motor)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
1 HP 240v 1ø 50 Hz Motor
(for models mfd. as of August 2, 2002)
3/4 HP 240v 1ø 50 Hz Motor with Plug
(for models mfd. prior to August 2, 2002)
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Neoprene Sponge Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
1 HP 230v 1ø 50 Hz Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 2 through 7 and 13 through 20)
3/4” S.A.E. Flat Washer
16” Impellor (3/4” bore)
(for models mfd. as of August 2, 2002)
12-1/2” Impellor (1/2” bore)
(for models mfd. prior to August 2, 2002)
3/16” x 3/16” x 1-7/8” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
15
16
Reversing T.E.F.C. Motor Mount Assembly
Reversing T.E.F.C. Motor Mount Assembly
10
11
12
13
14
15
16
17
18
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
8
9*
19
20
21
22
23
24
100109
100701
101130
120200
181003
150501
153002
153001
100007
120200
150501
153002
153001
154000
152004
153002
153001 7
850021 1
804034** 1
4
4
8
1
4
7
7
117604
153051
100714
802100
100604
153050
152006
1
1
1
1
1
4
1
4
4
4L-650 V-Belt (to idler assembly)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor with 3/4” Shaft (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
4
1
1
1
Neoprene Sponge Tape (sold by the foot)
3/4” S.A.E. Flat Washer
3/16” x 3/16” x 1-7/8” Key
16” Impellor (1/2” bore)
(for models mfd. as of August 2, 2002)
1 12-1/2” Impellor (1/2” bore)
(for models mfd. prior to August 2, 2002)
*** 1/2” S.A.E. Flat Washer
2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
*** As required.
17
18
Sensor Bracket Assemblies
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
Description
1 880251 1
6
7
8
9
10
4
5
2
3
11
12
13
130103
153010
152000
121028
122701
122605
154007
150005
817046
322062
122604
122700
150301
1
2
2
2
4
1
2
2
1
1
1
4
2
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Hi-Limit Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
19
20
Direct Spark Ignition (DSI) Burner Assembly
Direct Spark Ignition (DSI) Burner Assembly
151001
128933
883255
318712
150309
141317
152013
817027
128941
809307
883299
141105
141210
323737
150300
140819
140803
150108
142809
154002
319704
152013
150005
130201
318700
142936
154004
319202
802799
122200
150303
105500
7
8
9
10
4
5
2
3
6**
23
24
25
26
27
28
29
30
18
19
20
21
22
11
12
13
14
15
16
17
Illus. No.
Part No.
Qty.
Description
1 814832
809686*
817209*
1
1
1
1
1
1
2
1
1
1
2
2
1
1
2
1
1
1
1
1
1
2
4
4
4
1
1
1
1
4
Direct Spark Ignition (DSI) Burner Box ONLY
Natural Gas Burner Assembly
(includes illus. nos. 1 through 5 and 7 through 31)
Liquid Propane (L.P.) Gas Burner Assembly
(includes illus. nos. 1 through 5 and 7 through 31)
D-75 Liquid Propane (L.P.) Conversion Kit
Large Tube Burner
3/4” Direct Spark Ignition (DSI) Manifold (4-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Washer TEK Screw
#30 Burner Orifice (natural gas)
#49 Burner Orifice (liquid propane [L.P.] gas)
#8-32 x 1/2” Pan Head Machine Screw
1/2” x 29-1/8” Pipe
4
1
1
#8-32 Pal Nut
1/2” 24 VAC CE Gas Valve (natural gas)
1/2” 24 VAC CE Gas Valve (liquid propane [L.P.] gas)
1 Gas Valve Bracket
12 #10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” Bronze Union Elbow
#6-32 Hex Nut
Direct Spark Ignition (DSI) Module Mounting Bracket
ADC CE Direct Spark Ignition (DSI) Module Three (3) Tries
Ignitor Probe Assembly
1/8” Push On Fastener
Hi-Limit Mounting Bracket
#6-32 Hex Nut
#6-32 x 1/4” Round Head Machine Screw
330º Hi-Limit Manual Reset
Pipe Bracket (bent)
3/4” x 1/2” Coupling
Twin Speed Nut
Sail Switch Damper (flat)
Sail Switch Top and Switch Bracket
Sail Switch
3/4” Pan Head Machine Screw
Sail Switch Actuator Rod
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
21
22
Hot Surface Ignition (HSI) Burner Assembly
Hot Surface Ignition (HSI) Burner Assembly
Illus. No.
Part No.
Qty.
Description
15
16
17
18
19
20
21
22
4
5
6
2
3
7
8
11
12
13
14
9 151001
10** 140819
140803
141210
318700
150300
128933
883255
810046
883299
150309
150309
810029
128975
141105
150103
153000
141314
142809
323737
319704
151000
150001
130201
---------
1
29
30
31
23
24
25
26
27
28
817110*
817111*
142936
150309
150309
151001
150309
128912
150301
881597
150309
1
1
1
1
2
3
1
1
4
4
4
4
4
4
1
2
2
1
1
1
1
1
1
2
2
1
1
1
2
2
2
3
1
1
1
1
Natural Gas Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 31)
For Models Manufactured with Natural Gas ONLY
Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 31)
For Models Manufactured with Liquid Propane (L.P.) Gas ONLY
Burner Box ONLY
Liquid Propane (L.P.) Conversion Kit
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hot Surface Ignition (HSI) Module Mounting Bracket
Hot Surface Ignition (HSI) Module II
Large Burner Tube
#8-32 x 3/4” Phillips Round Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
#30 Burner Orifice (natural gas) ONLY
#49 Burner Orifice (liquid propane [L.P.] gas) ONLY
4-Port Manifold
Pipe Bracket (bent)
#10-16 x 1/2” Hex Washer TEK Screw
CE 1/2” 24 VAC Redundant (natural gas) Gas Valve
CE 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly
1/2” Union Shut Off with Tail Piece
1/2” x 29-1/8” Nipple
Pipe Bracket
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º Hi-Limit ONLY
Sail Switch
(refer to Sail Switch Assembly on page 26)
3/4” x 1/2” Coupling (CE Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#8-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hot Surface Ignition (HSI) Flame Sensor
#8-18 x 7/16” Phillips Pan Head TEK Screw
Hot Surface Ignitor (2-1/2” length) - 24 VAC
#10-16 x 1/2” Hex Head TEK Crimptite Screw
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
23
24
Air-Operated Steam Damper Assembly
Air-Operated Steam Damper Assembly
23
24
25
26
27
28
29
30
18
19
20
21
22
13
14
15
16
17
8
9
10
11
12
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
165009
153002
152004
152002
153007
820321
803415
1
2
2
2
1
2
2
1
1
1
1
1
1
1
1
1
4
4
6
4
1
6
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
4
2
1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
4 1/4” Lock Washer
4 1/4-20 Hex Nut
108 Steam Damper Gasket (sold by the inch)
2
1
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/4” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
25
26
Sail Switch Assembly
Illus. No.
Part No.
Qty.
Description
3
4
5
1
2
8
9
6
7
10
319203
319202
319201
319200
154004
154002
150309
150303
122200
881706
105500
1
1
1
1
1
1
4
2
1
1
1
Sail Switch Mounting Bracket
Sail Switch Damper (flat)
Sail Switch Box Cover
Sail Switch Box
Twin Speed Nut
1/8” Push On Fastener
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 10)
Sail Switch Actuator Rod
Rear Electric Relay Panel Assembly 27
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
8
9
10
11
12
13
14
15
16
151000
150300
150008
120716
322812
822798
830273
830426
822799
830141
136008
136057
150301
150297
152004
121010
153002
132495
121300
131932
2
1
2
2
1
1
1
1
1
1
2
2
4
1
1
1
1
1
3
1
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
2-Position Terminal Block
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 230 Volt 1ø (for gas models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 230 Volt 1ø
(for steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 415 Volt 3ø with 1ø Motor
(for electric models)
(includes illus. nos. 1 through 14 and 16)
Transformer Assembly - 230 Volt 1ø
Transformer Assembly - 415 Volt 3ø
Fuse Holder ONLY
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
24V SPST Relay (for electric heated models Only)
28
Reversing Electric Relay Panel Assembly
Reversing Electric Relay Panel Assembly 29
Illus. No.
Part No.
Qty.
Description
7
8
9
5
6
10
11
12
13
14
1
2
3
4
15
16
17
150300
150008
120701
132497
822784
136008
136057
150301
150297
152004
121010
153002
132495
322812
822783
830117
--------*
151000
120765
131932
2
2
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
2
1
1
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
3-Pole Reversing Contactor
Transformer Assembly - 415 Volt 3ø
Fuse Holder ONLY
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 415 Volt (for gas models)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete - 415 Volt 3ø (for steam models)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete - 415 Volt 3ø (for electric models)
(includes illus. nos. 1 through 17)
#6-32 Pal Nut
Standard End Bracket
24V SPST Relay (for electric heated models Only)
* Not available at time of printing (contact factory for further information).
30
S.A.F.E. Temperature Probe Assembly
Illus. No.
Part No.
Qty.
Description
1 822752 1
2
3
4
5
154007
390390
150301
122647
2
1
2
1
Sensor Activated Fire Extinguishing (S.A.F.E.) Temperature Probe Assembly
(includes illus. nos. 1 through 5)
Push On Fastener
Sensor Bracket ONLY
#8-18 Phillips Pan Head TEK Screw
Connector ONLY
S.A.F.E. Solenoid and Piping Assembly 31
Illus. No.
Part No.
Qty.
Description
1 165114 1
6
7
8
9
10
11
12
2
3
4
5
13
143220
143251
143208
143099*
311588
143303
143155
150430
150301
143581
142887
824081
1
1
2
6'
1
1
1
2
2
1
1
1
Sensor Activated Fire Extinguishing (S.A.F.E.) Solenoid Valve 24V
50/60 Hz
3/8” F.P.T. Brass Tee
3/8” M.P.T. Brass Plug
3/8” Comp x 3/8” M.P.T. Brass Connector
3/8” OD x 0.035 Wall Copper Tubing
Sprinkler Head Mounting Plate
3/8” N.P.T. Brass Locknut
3/8” Brass Elbow 90°
#10 x 1/2” Self Drilling Screw
#8-18 x 7/16” TEK Screw
3 GPM 3/8” F.P.T. Spray Nozzle
3/4” to 3/8” Bushing for Sensor Activated Fire Extinguishing (S.A.F.E.)
Valve
R.C. Network Assembly
* Sold by the foot.
32
Outer Top/Back Guard Assemblies
Illus. No.
Part No.
Qty.
Description
1
2
3*
7
8
9
4
5
6*
322809
150301
323738
314510
150301
150300
312527
314518
150301
103500
1
1
1
4
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard (for gas models Only)
Top Back Guard (for electric models Only)
7 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 #10-16 x 1/2” Hex Washer TEK Screw
1 Outer Top
1 Bottom Back Guard
13 #8-18 x 7/16” Phillips Pan Head TEK Screw
4 Leveling Leg
* There is no outer top or top back guard on steam models.
K W V O L T A G E P H A S E W I R E
O V E N
A S S E M B L Y
3 0 4 1 6 3 Ø 3 o r 4 8 3 5 0 6 4
E L E M E N T
Q t y .
6
K w
5
P a r t N o .
1 2 0 0 1 3
O V E N
W I T H
W I R E
C R I M P
T E R M I N A L
Q t y .
S i z e P a r t N o .
1 # 8 8 8 2 5 7 1
T E R M I N A L
L U G
Q t y .
1
P a r t N o .
1 2 1 0 1 0
B U S
B A R
P / N :
1 2 1 0 1 1
1
O V E N R E L A Y
C a t .
N o .
D P A 4 3
P a r t N o .
1 3 1 3 5 7
34
Part No.
Description
112039 “Black/White/Green Ground” Label
112280 “Clean Lint Screen” Label
114001 “CAUTION - Exhaust/Lint Screen” Label
114521 “Phase 7 OPL Program Location Summary” Label
114006 “WARNING - Fire Hazards” Label
114094 “MOP HEAD WARNING” Label
121499 5-1/2” Wire Tie
121500 8” Harness Tie
122804 Manometer (hydro gauge) for Measuring Gas Pressure
404502 White Brush-In-Cap Bottle Touch-Up Paint
410001 1/2” Allen Wrench (for removal of shutoff valve tail piece)
882458 Tumbler Puller Assembly
Additional Parts Available
ADC 450592 1 - 04/24/02-15 2 * 09/27/02-13
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 For Models Mfd. as of July
- 5 For Models Mfd. prior to July
- 6 Phase 7 OPL Microprocessor Control Panel Assembly
- 7 Phase 7 OPL Microprocessor Control Box Assembly
- 8 Front Panel Assembly
- 9 Main Door “Steel” Assembly
- 10 Main Door Switch Assembly
- 11 Basket (Tumbler)/Support Assemblies
- 12 Lint Drawer/Lint Drawer Switch Assembly
- 13 Idler Bearing Assembly
- 15 Basket (Tumbler) Bearing Assembly
- 17 Non-Reversing Motor Mount Assembly
- 19 Reversing T.E.F.C. Motor Mount Assembly
- 21 Sensor Bracket Assemblies
- 23 Direct Spark Ignition (DSI) Burner Assembly
- 25 Hot Surface Ignition (HSI) Burner Assembly
- 27 Air-Operated Steam Damper Assembly
- 28 Sail Switch Assembly
- 29 Rear Electric Relay Panel Assembly
- 31 Reversing Electric Relay Panel Assembly
- 32 S.A.F.E. Temperature Probe Assembly
- 33 S.A.F.E. Solenoid and Piping Assembly
- 34 Outer Top/Back Guard Assemblies
- 35 Electrical Oven Component Application Chart
- 36 Additional Parts Available