Samsung GH68-04847A Owner`s manual

DUAL BAND
GSM TELEPHONE
SGH-N620E
OWNER’S MANUAL
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-04847A
English. 02/2004. Rev.1.0
The information in this manual is believed to be correct at
the time of printing; Samsung reserves the right, however,
to change or modify any of the specifications
without notice.
Some of the contents in this manual may differ from your
phone, depending on the software installed, your SIM card
or your service provider.
Contents
Safety Precautions . . . . . . . . . . . . . . . .
7
Unpacking . . . . . . . . . . . . . . . . . . . . . .
9
Your Phone . . . . . . . . . . . . . . . . . . . . .
10
Phone Layout. . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . .
10
12
14
Getting Started . . . . . . . . . . . . . . . . . .
15
Installing the SIM Card and the Battery . . .
Charging a Battery . . . . . . . . . . . . . . . . . . . . .
Switching the Phone On/Off . . . . . . . . . . . . .
15
18
20
Call Functions . . . . . . . . . . . . . . . . . . .
22
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . .
Answering or Rejecting a Call . . . . . . . . . . .
Viewing Missed Calls . . . . . . . . . . . . . . . . . . .
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . .
22
24
25
26
28
Entering Text . . . . . . . . . . . . . . . . . . .
35
Changing the Text Input Mode . . . . . . . . . . .
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . .
Using the ABC Mode . . . . . . . . . . . . . . . . . . .
Using the Number Mode . . . . . . . . . . . . . . . .
Using the Symbolic Mode . . . . . . . . . . . . . . .
36
36
38
40
40
Phonebook . . . . . . . . . . . . . . . . . . . . .
41
Storing a Phone Number with a Name . . . .
Phonebook Options . . . . . . . . . . . . . . . . . . . .
Speed-Dialling by SIM Memory Location . .
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . .
Dialling a Number using the Service
Directory or Information Numbers . . . . . . .
41
42
45
46
47
3
Contents (continued)
Selecting Functions and Options . . . . . .
48
Using the Menus . . . . . . . . . . . . . . . . .
50
Accessing Menu Functions by Scrolling . . .
Accessing Menu Functions by
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . .
Menu Structure . . . . . . . . . . . . . . . . . . . . . . .
50
Call Records . . . . . . . . . . . . . . . . . . . .
55
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . .
Received Calls (Menu 1-2) . . . . . . . . . . . . . . .
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . .
Call Time (Menu 1-4). . . . . . . . . . . . . . . . . . . .
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . .
55
55
56
56
57
Messages . . . . . . . . . . . . . . . . . . . . . .
58
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . .
Read Messages (Menu 2-2). . . . . . . . . . . . . .
Write Messages (Menu 2-3) . . . . . . . . . . . . .
Preset Message List (Menu 2-4) . . . . . . . . . .
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . .
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . .
Picture Messages (Menu 2-7) . . . . . . . . . . . .
58
59
61
62
62
63
64
Voice Functions . . . . . . . . . . . . . . . . . .
66
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . .
Voice Command (Menu 3-2) . . . . . . . . . . . . .
Voice Memo (Menu 3-3). . . . . . . . . . . . . . . . .
Voice Active (Menu 3-4). . . . . . . . . . . . . . . . .
66
69
69
71
Tones . . . . . . . . . . . . . . . . . . . . . . . . .
72
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . .
Melody Composer (Menu 4-2) . . . . . . . . . . . .
Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . .
72
73
75
4
51
52
Alert Type (Menu 4-4). . . . . . . . . . . . . . . . . . .
Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . .
Message Tone (Menu 4-6) . . . . . . . . . . . . . . .
Error Tone (Menu 4-7). . . . . . . . . . . . . . . . . . .
Minute Minder (Menu 4-8). . . . . . . . . . . . . . .
Connect Tone (Menu 4-9). . . . . . . . . . . . . . . .
76
76
77
77
78
78
Settings . . . . . . . . . . . . . . . . . . . . . . .
79
Phone Settings (Menu 5-1) . . . . . . . . . . . . . .
Network Services (Menu 5-2) . . . . . . . . . . . .
Security Settings (Menu 5-3). . . . . . . . . . . . .
LCD/LED Settings (Menu 5-4) . . . . . . . . . . . .
Browser Settings (Menu 5-5) . . . . . . . . . . . .
79
84
93
96
98
Organiser . . . . . . . . . . . . . . . . . . . . . .
99
Scheduler (Menu 6-1). . . . . . . . . . . . . . . . . . .
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . .
Calculator (Menu 6-3). . . . . . . . . . . . . . . . . . .
World Time (Menu 6-4). . . . . . . . . . . . . . . . . .
Clock (Menu 6-5). . . . . . . . . . . . . . . . . . . . . . .
99
101
103
105
106
Games . . . . . . . . . . . . . . . . . . . . . . . . 107
Squares (Menu 7-1) . . . . . . . . . . . . . . . . . . . . 108
Fortress (Menu 7-2) . . . . . . . . . . . . . . . . . . . . 109
Ice Cave (Menu 7-3) . . . . . . . . . . . . . . . . . . . . 110
WWW Services . . . . . . . . . . . . . . . . . . 111
Home (Menu 8-1) . . . . . . . . . . . . . . . . . . . . . .
Bookmark (Menu 8-2). . . . . . . . . . . . . . . . . . .
Goto (Menu 8-3) . . . . . . . . . . . . . . . . . . . . . . .
Navigating with the WAP Browser . . . . . . . .
Entering Text, Numbers, or Symbols. . . . . . .
Network Connection Information . . . . . . . . .
111
112
113
113
115
116
5
Important Safety
Precautions
Contents (continued)
Additional Services . . . . . . . . . . . . . . . 117
ALS (Alternate Line Service) . . . . . . . . . . . . . 117
Solving Problems . . . . . . . . . . . . . . . . . 119
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Access Codes . . . . . . . . . . . . . . . . . . . 122
Phone Password . . . . . . . . . . . . . . . . . . . . . .
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PIN2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PUK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PUK2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Barring Password . . . . . . . . . . . . . . . . . . . . .
122
123
123
124
124
124
Health and Safety Information . . . . . . . 125
SAR Certification Information . . . . . . . . . . . .
Precautions When Using Batteries . . . . . . .
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Environment . . . . . . . . . . . . . . . . .
Electronic Devices . . . . . . . . . . . . . . . . . . . . .
Potentially Explosive Environments . . . . . . .
Emergency Calls . . . . . . . . . . . . . . . . . . . . . .
Other Important Safety Information . . . . . . .
Care and Maintenance . . . . . . . . . . . . . . . . .
125
126
128
128
129
131
131
132
133
Glossary . . . . . . . . . . . . . . . . . . . . . . . 135
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Index . . . . . . . . . . . . . . . . . . . . . . . . . 139
Quick Reference Card . . . . . . . . . . . . . . 143
6
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Unpacking
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press <SEND>. If certain feature are in
use, deactivate those features before you can make
an emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call until
given permission to do so.
Your package contains the following items.
Phone
Travel Adapter
Water Resistance
Your phone is not water-resistance. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or repair
your phone.
For more detailed safety information, see
“Health and Safety Information” on page 125.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACEDE BY
AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
8
Battery
Hand Strap Owner’s Manual
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Simple hands-free car kit
• Standard battery
• Battery Charger
• Data kit
• Wearable Ear-microphone
• Ear-microphone*
* : Depending on the country, this accessory may be
supplied in the standard package.
9
Your Phone
Your Phone
Soft keys
Perform the functions indicated by the text
above them (in the bottom line of the display).
Phone Layout
In the menu facility, scroll through the menu
options and phonebook memory.
allows you to access the Ring Tone menu
,.
allows you to access the Voice dialling
or Voice command once you have set the Voice
Active option in idle mode.
The following illustration shows the main elements
of your phone.
Deletes characters from the display.
In idle mode, allows you to access the WAP
Browser quickly.
Service light
Makes or answers a call.
In idle mode, accesses the call list.
In the menu facility, selects a menu function or
stores information that you have entered (such
as a name) in the phonebook.
Antenna
Earphone jack
Earpiece
Display
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle mode
and cancels your input.
~
Volume keys
Enter numbers, letters and some special
characters.
When held down in idle mode, locks the
keypad manually.
Microphone
When held down, toggles the Silent mode on
and off.(This feature is not available when
the phone is connected to a optional car kit.).
During a call, adjust the earpiece volume.
In idle mode, adjust the key tone volume.
When you get a call, silence the ring tone
immediately by pressing and holding it.
10
11
Your Phone
Your Phone
Display
Display Layout
Icons
The display comprises three areas.
Icons
Text and
graphic area
Soft key
indications
Area
Description
First line
Displays various icons (see opposite).
Middle lines Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
12
Shows the functions currently
assigned to the two soft keys.Or
shows various types of information,
such as missed calls, call diverting
options, advice of charge information
or the keypad lock icon ( ). This
information varies, depending on
your SIM card, service provider or
current context.
Signal strength: shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Service: appears when a call is in
progress.
New Message: appears when a new
text message has been received.
New Voice Mail: appears when a new
voice mail message has been received.
Vibrator on/Silent mode on: appears
when the Vibrate mode or Silent mode
is active.
Alarm on: appears when you set an
alarm.
Battery strength: shows the level of
your battery. The more bars you see, the
more power you have left.
13
Your Phone
Getting Started
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
comes on.
To specify the length of time for which the backlight
is active, set the Backlight menu option (5-1-5); see
page 81 for further details.
Note: When you are in lock mode, press and hold the
soft key to switch on the backlight.
Service Light
There are several cases in which the service light
flashes.
• When in service.
To activate or deactivate the service light, set the
Service Light menu option (5-1-6); see page 82.
To select the colour of the service light, set the
Service Colour menu option (5-4-4); see page 97.
Installing the SIM Card and the Battery
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your subscription
details (PIN, optional services available and so on).
• Keep all SIM cards out of the reach of small
children.
• The SIM card and its contacts can be easily
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before removing the
battery.
1. If necessary, switch off the phone by holding
down
until the closing animation is displayed.
2. Remove the battery. To do so:
➀ Press and hold down the catch above the
battery on the back of the phone
➁ Slide the battery away, as shown
• When an SMS message is received (the light is
yellow, only if the Message Tone is set Light
only.).
• When the alarms ring.
①
②
• When you receive a call
To change the colour, set the phonebook Colour
option; see page 45.
14
15
Getting Started
3. Slide the SIM card into the SIM card socket so
that it locks the card into the position.
Make sure that the notched corner is at the
top left and the gold contacts of the card face
into the phone.
Getting Started
4. Place the battery back on the phone. Slide the
battery up towards the catch until it locks into
place. Make sure that the battery is properly
installed before switching on the power.
Note: When you need to remove the SIM card, slide
it, as shown, and take it out of the socket.
16
17
Getting Started
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
140 minutes.
1. With the battery in position on the phone connect
the lead from the travel adapter to the bottom of
the phone. Check that the arrow on the lead
connector is facing towards the front of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
2. Connect the adapter to a standard AC wall outlet.
** Warning **
Battery Low
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
Note: Do not remove the battery from the phone
while the travel adapter is connected to the
phone.
18
When the battery becomes too weak for the phone
to operate, the phone switches off automatically.
19
Getting Started
Getting Started
Switching the Phone On/Off
1. Hold down
for more than one second to
switch the phone on.
Note: If “Insert SIM Card” appears on the display,
please check that the SIM card is correctly
inserted.
4. When you wish to switch the phone off, hold
down
for more than two seconds.
Note: If you want to switch the phone off in lock
mode, unlock the phone first by pressing the
left soft key and pressing the
key.
2. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 0000. For further
details, see page 122.
3. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 123.
The phone searches for your network and when it
finds it, the idle screen, illustrated below, is
displayed.
<SERVICE PROVIDER>
Sat 14 Mar 12:57
Menu
PhoneBook
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (5-1-3).See
page 80.
20
21
Call Functions
Call Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press
.
Note: If you have set the Auto Redial option (5-1-7) to
ON (see page 82) and the person called does not
answer or the line is busy, the number is
redialled automatically up to ten times.
Making International Calls
1. Press and hold down the
key.
The + international prefix appears.
2. Key in the country code, area code and phone
number and press
.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the Ssoft key.
Any other digit
in the number
Press the
or
key
until the cursor ( ❘ ) is immediately to the right of the digit to
be cleared. Press theS soft key.
You can also insert a missing
digit simply by pressing the
appropriate key.
The whole display
22
Ending a Call
When you have finished your call, briefly press
.
Making a Call from the Phonebook
You can store the names and phone numbers of the
people you call regularly in the SIM card memory and
phone memory, called the phonebook. You then
simply select the required name to recall the
associated number. For further details on the
Phonebook feature, refer to page 41.
Redialling the Last Number
The phone stores call records. To use any of these
numbers, proceed as follows.
1. If there are any characters on the display, press
the
key to return to the idle mode.
2. Press the
key to access the list of the last call
record including missed, received and dialled calls.
3. Use the
and
keys to scroll through the
numbers until the required number is displayed.
4. Press the
key to dial the number displayed.
Hold down the S soft key for
more than one second.
23
Call Functions
Call Functions
Using the Voice Dialling Feature
When the Voice Dialling function is used, by saying a
name, the number that has been associated to that
name is dialled automatically. For further details on
the Voice Dialling feature, refer to page 66.
Answering or Rejecting a Call
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed.
Adjusting the Volume
During a call, if you wish to adjust the earpiece
volume, use the volume key on the left side of the
phone.
Answering a Call
There are two ways to answer an incoming call.
• Press the Accept soft key.
• When the Any-Key Answer menu option is set to
ON, press any key( except
,the Reject soft key
or the volume key )
Rejecting a Call
To reject a call, press
When you get a call, press and hold the volume key
to silence the ring tone immediately.
or the Reject soft key.
Note: If you receive a call in locked mode, it deactivats
automatically. When you end the call the phone
will lock automatically after the predetermined
amount of time.
In idle mode, you can adjust the key tone volume
using the same keys.
24
25
Call Functions
Call Functions
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available and you can then call the person
back, if necessary.
Editing a Missed Call Number
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
3. Press the Select soft key.
To view the missed call immediately, proceed as
follows.
1. Press the Options soft key.
2. Press
or
to highlight the Paste option.
4. Change the number as required. Press
to move back through the number.
5. To...
1. Press the View soft key.
2. To...
key.
Store the number
Save soft key and enter
the name and location
required (for further
details, refer to page 41).
Then press the...
Scroll through the
missed calls
or
Call the number displayed
key.
Edit or delete a missed
call number
Then press the...
Call the number
The number corresponding to the most recent
missed call is displayed, if available.
or
key.
Deleting a Missed Call
Options soft key
(see opposite).
1. Press the Options soft key.
2. Press
or
to highlight the Delete option.
3. Press the Select soft key.
You can press
feature.
at any time to exit the Missed Call
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 55.
26
27
Call Functions
Call Functions
In-Call Options
Your phone provides a number of control functions
during a call. To access these functions during a call,
press the Options soft key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed as
follows.
1. Press the Options soft key.
2. Press
or
to highlight the Mute option.
3. Press the OK soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Unmute
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Phonebook
3. Press the OK soft key.
4. Enter the start of the name that you wish to find
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To view the highlighted entry, press the View soft
key.
For a more detailed description of the Phonebook
feature, refer to page 41.
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Call Functions
Call Functions
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (5-2-3) to Activate (see page 89). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press
to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options soft key and selecting the Hold option.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
To end a held call, press the Options soft key and
select the End held call option.
3. To end the current call, press
.
You are automatically switched back to any held
calls.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
30
31
Call Functions
Call Functions
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
Having a Private Conversation With One
Participant
2. Highlight the required person, by pressing
or
, followed by
.
3. Press the Private soft key.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the Options
soft key and select Join.
All the multiparty call participants can now hear
each other.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
2. Highlight the required person, by pressing
or
, followed by
.
3. Press the Remove soft key.
The call is ended with that participant, but you
can continue to talk with the other participants.
4. End the multiparty call by pressing
.
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
32
33
Call Functions
Entering Text
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
)
appears in the display.
After you have finished your call, you can read the
message; refer to page 59 for further details.
Note: It is also possible to read SMS messages
during a call using the options soft key and
selecting ‘5 SMS service’ and then ‘1 Read
messages’.
Whether storing a name in the phonebook, creating
your personal greeting or scheduling events in your
calendar, you will need to enter text.
You are provided with the following text input
modes.
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter – when you press the
key
once, J, K or L may be displayed. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
ABC mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice
three or four times until the letter is displayed.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered trademark of Tegic Communications, Inc.
34
35
Entering Text
Entering Text
Changing the Text Input Mode
1. When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator in the lower right corner of the display.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
to
. Press each key only once for one letter.
Example: to enter HELLO in the T9 English mode,
press
,
,
,
and
.
The word that you are typing appears in the display.
It may change with each key that you press.
Save
ABC
Text input mode
indicator:
ABC: ABC mode
NUM: Number mode
: T9 mode
SYM: Symbolic mode
2. Press the right soft key.
The modes available are displayed.
3. Scroll to the required mode, then press the Select
soft key.
Using the T9 Mode
The T9 predictive text input mode allows you to enter
words easily with a minimum of key presses. As you
press each key, the phone selects a letter that makes
up the word that it thinks you are typing, based on a
built-in dictionary. As a new letter is added, the word
changes based on the key that you have pressed.
36
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press
repeatedly to display
alternate word choices for the keys that you have
pressed.
Example: OF and ME both share the sequence
,
. The phone displays the
most commonly used choice first.
4. Complete each word with a space by pressing
the
key.
To type words not found in the T9 mode, change the
text input mode to the ABC mode.
To delete letters, press
. Press and hold down
to erase entire words.
37
Entering Text
Entering Text
There are three shift options:
• Lower Case (no shift indicator)
• Initial Cap ( indicator)
• Caps Lock ( indicator)
Press
one or more times to display the appropriate shift indicator and continue typing normally.
David
OK
ENG
Shift indicator
Note: To exit the text input mode without saving your
input, press
. The phone returns to the
previous menu level.
2. Select the other letters in the same way.
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on the
same key), just wait for a few seconds for
the cursor to move right automatically, and
then select the next letter.
There are three shift options:
• Lower Case (no shift indicator)
• Initial Cap ( indicator)
• Caps Lock ( indicator)
Press the
key one or more times to display the
appropriate shift indicator in the bottom line of the
display and continue typing normally.
To insert a space, press the
key.
To delete letters, press the
key. Press and hold
down the
key to clear the display.
Using the ABC Mode
Key
Use the
to
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
Note: To display a list of special characters, press
. See the table on the next page for
more information on the characters
available.
38
Characters in the Order Displayed
keys to enter your text.
Lower Case
Upper Case
1
2
3
4
5
6
7
8
9
0
: ;
A B
D E
G H
J K
MN
P Q
T U
WX
0 x
¿
C
F
I
L
O
R
V
Y
<
¡
2
3
4
5
6
S
8
Z
>
1 = “ /
Ä ÆÅ Γ
É ∆
Θ
Λ
Ñ Ö Ø Ξ
7 ΠΣ
Ü Φ
9 ΨΩ
%# £
.
a
d
g
j
m
p
t
w
0
,
b
e
h
k
n
q
u
x
+
?
c
f
i
l
o
r
v
y
(
!
2
3
4
5
6
s
8
z
)
1 - ‘ @:
à ä æå Ç
é è
ì
ñ
7
ù
9
&
ò ö ø
ß
ü
_ $
39
Entering Text
Phonebook
Using the Number Mode
The Number mode enables you to enter numbers in a
text message (a telephone number, for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text entry mode.
You can store phone numbers and their corresponding names in the memory of your SIM card. In
addition, you can store up to 500 numbers and
names in the phone memory. The SIM card and
phone memories, although physically separate, are
used as if they were a single entity, called the
phonebook.
Storing a Phone Number with a Name
Using the Symbolic Mode
The Symbolic mode enables you to enter various
symbols.
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
1. Key in the number to be stored.
123 456 789
.( ), : ; %!
Save
SYM
To scroll through the symbols available, press
the
or
key. Press the number key
corresponding to the required symbol. The phone
then automatically switches back to the text entry
mode used immediately prior to selecting the
Symbolic mode.
Notes:
• If you make a mistake while entering a number,
correct it using the Ssoft key. For further
details, refer to page 22.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
2. When you are sure that the number is correct,
press the Save soft key.
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see page 35.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name. If the card memory is full, the first free
location in the phone memory is displayed.
40
5. Press the right soft key to toggle between the phone
(To Phone) and card (To Card) memories.
41
Phonebook
Phonebook
6. If you do not want to save the number and name
in the suggested location, press
to clear the
location number and enter your preferred location
by pressing the number keys.
7. Press OK to store the name and number.
You can access the phonebook options by
pressing the Options soft key, or scroll through
the memory with
or
.
8. To exit, press the
key.
Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
Voice Record
Note: This option only appears if no name has as yet
been recorded.
This option allows you to add a voice tag to the
number.
Follow the instructions given by your phone to record
the required name.
Play Voice
Note: This option only appears when you have
already recorded a name.
This option plays back the names that you have
recorded.
Voice Delete
Note: This option only appears when you have
already recorded a name.
Accessing the Options
To access the various phonebook options, proceed as
follows.
This option allows you to delete a specific voice tag.
You are asked to confirm the deletion by pressing the
OK soft key.
1. Press the Options soft key.
Paste
The first available option is highlighted.
2. To...
42
Then press the...
Select the
highlighted option
Select soft key.
Highlight a
different option
or
key one or
more times until the
required option is
highlighted.
Allows you to paste the phonebook number into the
normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
Use the Ssoft key to change the number as
required (refer to page 22 for further details). When
you are ready to dial, press
.
43
Phonebook
Phonebook
Edit
Colour
Allows you to edit a number and name stored in the
phonebook.
This option allows you to assign a specific service
light colour to a number and thus distinguish the
caller by the service light colour.
Four colours are available (normal, orange, violet and
blue) and they can be assigned to up to five numbers.
If no specific colour assigned, the service light
flashes with the colour you set in the Service
Colour option (5-4-4).
Erase
Allows you to erase a number and name stored in
the phonebook.
You are asked to confirm that you wish to erase the
name and number from the phonebook by pressing
the Yes soft key.
Copy
Allows you to copy a phonebook number to another
location. Use this option to store a number similar to
one already in memory; once copied, edit the number
and store it in another location on the SIM card or in
the phone memory.
Speed-Dialling by SIM Memory Location
Once you have stored phone numbers in the SIM
card, you can dial them easily whenever required.
To speed-dial a number, proceed as follows.
To speed-dial a
Then...
number in locations...
Memory Status
2 to 9
Press and hold down the
appropriate key.
This option allows you to check how many names and
phone numbers are stored and how many locations
are still free in the card memory and phone memory.
10 and above
Press the appropriate keys,
followed by the # key.
When the display shows
the name, phone number
and location, press the
Dial soft key.
Alert
This option allows you to assign a specific ringing
tone to a number and thus distinguish the caller by
the ringing tone. Specific ringing tones can be
assigned to up to five numbers.
44
Note: Memory location 1 is reserved for your Voice
Mail server number.
45
Phonebook
Phonebook
Searching for and Dialling a Number in
the Phonebook
Dialling a Number using the Service
Directory or Information Numbers
1. When the idle screen is displayed, press the
PhoneBook soft key.
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
2. If your SIM card provides Service Dialling Number
(SDN) and Information Number services, press the
OK soft key when Find Entry is highlighted.
If not, go to step 3.
When the idle screen is displayed, press the
PhoneBook soft key, then you can select one of the
services.
3. Enter the start of the name that you wish to find
and press the Find soft key.
Service Dir.: enables you to view the Service
Directory and make calls from it.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
4. To...
Then press the...
View the
highlighted entry
View soft key.
Select a
different entry
or
key one or more
times until the required entry
is highlighted.
Look for a name
starting with a
different letter
Key labelled with the required
letter.
5. Once you have found the required entry, press
to dial the number.
46
47
Selecting Functions and Options
Selecting Functions
and Options
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys. Each menu and sub-menu allows you
to view and alter the settings of a particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
<SERVICE PROVIDER>
Sat 14 Mar 12:57
Menu
PhoneBook
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Select the:
• Function displayed
or
• Option highlighted
Then press the...
Left soft key.
View the next function
or highlight the next
option in a list
key.
Move back to the
previous function
or option in a list
key.
Move back up one
level in the structure
Exit the structure
without changing
the settings
Right soft key.
key.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
Press the left soft key
to access the menu
feature.
48
Press the right soft
key to access the
Phonebook feature.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
49
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Accessing Menu Functions by Using
Shortcuts
The menus and sub-menus can be accessed by
scrolling or by using the shortcuts.
The menu items (menu, sub-menus and options) are
numbered and can be accessed quickly by using their
shortcut number. The shortcut number is shown in
the bottom line on the display.
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access
the menu facility. Scroll with the
or
keys to reach the required main menu, such as
Tones. Press the Select soft key to enter the
menu.
2. If the menu contains any sub-menus, Ring Tone
for example, you can access them by scrolling
with the
or
keys and pressing the
Select soft key.
If the menu you have selected contains further
options, repeat the same procedure.
3. To...
Scroll through the menus
Confirm the chosen setting
50
Then press the...
or
keys.
Select soft key.
Return to the previous
menu level
soft key.
Exit the menu, without
changing the settings
key.
1. In idle mode, press the Menu soft key to access
the menu facility.
2. Key in the first digit of the shortcut number.
Repeat this for each digit of the shortcut number.
Example: setting the Any-key Answer function
Press the Menu soft key, and key in
,
.
,
,
Menu to enter the menu, 5 for Settings, 1 for
Phone Settings, 4 for Any-key Answer and 2 to
set the Any-key Answer option to O N.
Note: The numbers assigned to each menu option
are indicated in the list on the next page.
They may not match the menu number on
the phone. It depends on the services
supported by the SIM card.
51
Using the Menus
Using the Menus
Menu Structure
Menus let you check or change your phone settings. The
following outline shows the menu structure.
Main menu
level 1
level 2
3. Voice Functions
1. Voice Dial
1. Record
2. Act
3. Delete One
4. Play All
5. Delete All
1. Record
2. Act
3. Play All
4. Delete All
1. Record
2. Replay
3. Delete One
4. Delete All
1. OFF
2. Voice Dial
3. Voice Command
Note: You can only see menu 0, if your SIM card supports
the SIM Application Toolkit. This is a network
feature. Please contact your service provider for
more information.
2. Voice Command
3. Voice Memo
Main menu
level 1
1. Call Records
1. Missed Calls
2. Received Calls
3. Dialled Calls
4. Call Time
5. Call Cost 1
2. Messages
1. Voice Mail
2. Read Messages
3. Write Messages
4. Preset Message List
5. Setup
6. Broadcast
level 2
4. Voice Active
1. Last Call Time
2. Total Sent
3. Total Received
4. Reset Timers
1. Last Call Cost
2. Total Cost
3. Max Cost
4. Reset Counters
5. Set Max Cost
6. Price/Unit
1. Connect to Voice Mail
2. Voice Server Number
4. Tones
1. Ring Tone
2. Melody Composer
3. Ring Volume
4. Alert Type
5. Keypad Tone
6. Message Tone
7. Error Tone
8. Minute Minder
9. Connect Tone
5. Settings
1. Phone Settings
1. Service Centre
2. Default Type
3. Default Validity
4. Reply Path
5. Delivery Report
1. Read
2. Receive
3. Channel List
4. Language
1. Greeting Message
2. Own Number 1
3. Language
4. Any-key Answer
5. Backlight
6. Service Light
7. Auto Redial
8. Auto Answer
9. Caller ID
0. KeyLock Settings
*. Reset Settings
#. Active Line 1
7. Picture Messages
1
52
Shown only if supported by your SIM card.
53
Using the Menus
Main menu
level 1
level 2
5. Settings
2. Network Services
1. Call Diverting 2
2. Call Barring 2
3. Call Waiting 2
4. Network Selection
5. Line Identification 2
6. Closed User Group
1. PIN Check
2. Change PIN
3. Phone Lock
4. Change Password
5. SIM Lock
6. Fixed Dialling 1
7. Change PIN2 1
1. Screen Mode
2. Select Image
3. LCD Contrast
4. Service Colour
1. Proxy Settings
2. Current Proxy
3. Security Settings
4. LCD/LED Settings
5. Browser Settings 2
6. Organiser
1, Scheduler
2. Alarm
3. Calculator
4. World Time
5. Clock
7. Games
8. WWW Services 2
1
2
1. Daily Alarm
2. Once Alarm
3. Weekly Alarm
4. Alarm Tone
1. Set Time
2. Set Date
3. Format
1. Squares
2. Fortress
3. Ice Cave
1. Home
2. Bookmark
3. Goto
Call Records
Via this menu, you can view the phone calls:
• Missed
• Received
• Dialled
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
Missed Calls
Menu 1-1
This option lets you view the last 15 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
Received Calls
Menu 1-2
This option lets you view the last 15 phone calls
received. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
Shown only if supported by your SIM card.
May not be shown or supported by your network service provider.
54
55
Call Records
Dialled Calls
Call Records
Menu 1-3
This option lets you view the last 15 numbers dialled.
You can also:
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
Call Cost
Menu 1-5
Note: The options for this menu may vary, depending
on your SIM card.
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Last Call Time: length of the last call.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
will no longer be able to make any calls, except calls
to the emergency services, until you reset the
counter.
Total Sent: total length of all calls made since the
timer was last reset.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Total Received: total length of all calls received
since the timer was last reset.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 123) and then press the OK soft key.
Call Time
Menu 1-4
This option lets you view the timers for calls made
and received. The following timers are available.
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 122) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 123) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 123) and then press the OK soft key.
Note: AOC (Advice Of Charge) information may be
displayed in idle mode, depending on your SIM
card or service provider.
56
57
Messages
Messages
Connect to Voice Mail
Your phone receives voice mail notification messages,
and the Short Message Service(SMS) messages. Voice
mail and SMS are network services. Please contact your
service provider for more information.
When the
icon appears, you have received voice
mail. When the
icon appears, you have received a
new text message. If the Message Tone menu option
(4-6) is set to Light only, the service light flashes
yellow. If the message memory is full, an error message
is displayed, the
icon flashes and you cannot
receive any new messages. Use the Delete option in
the Read Messages menu (2-2) to delete obsolete
messages. Once there is space in the memory any
undelivered SMS messages will be received (provided
sufficient space is available).
Before using this feature, you must enter the voice
server number obtained from your service provider (see
the following page). You can then select this option and
simply press the OK soft key to listen to your
messages.
Note: In idle mode, you can access your voice mail
server directly by holding down the
key.
Voice Server Number
You can change the voice mail server number.
To...
Then press the...
Enter the server
number
Corresponding number
keys.
Other types of messaging is also available.
Recall a number in
the phonebook
PhoneBook soft key.
• Picture Messages : refer to the Picture
Messages menu option (2-7); see page 64.
Correct a digit
S soft key.
• Ringtone Messages : refer to the Ring Tone menu
option (4-1); see page 72.
• Operator Logo Messages : press the Vi e w soft
key to view it and Save soft key to use it in idle
mode. If you don’t want to use the logo, press the
Exit or Discard soft key.
Voice Mail
Menu 2-1
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
58
Move the cursor to
the left/right without
clearing the digit
or
key.
Note: See page 41 for instructions on how to use the
phonebook.
Read Messages
Menu 2-2
When the Read Messages menu is selected, the
header of the first message is displayed. This contains:
• Message number
• Message status (new, old, not sent, sent)
59
Messages
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
• Message text
To scroll through the messages, press the
or
keys. You can choose the following options, by
pressing the Options soft key.
Text Reply: allows you to reply by sending a text
message. You can either:
• Send the message
• Save and send the message
• Save but not send the message
Call back: allows you to call the sender back.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Send again: allows you to resend a message that
you have already sent.
Note: The options available vary, depending on the
message status (new, old, not sent, sent).
60
Messages
Write Messages
Menu 2-3
Via this menu, you can write and edit text messages
of up to 160 characters.
1. Key in a message. For details on how to enter
text, refer to page 35.
2. After you complete the message, you can select
the following options.
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
3. After selecting the required option, press the
Select soft key.
The display prompts you to enter the destination
number.
4. Enter the phone number and press the O K soft
key. Or,
Press the Phonebook soft key to select the
number from the phone book.
61
Messages
Preset Message List
Messages
Menu 2-4
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using
the
or
keys. When the required message
number appears, press the Options soft key.
The following options are available.
Edit: allows you to write a new message or edit the
selected preset message.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delete: allows you to delete the selected preset
message.
Setup
Menu 2-5
Via this menu, you can set up default SMS
information.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the messages into the selected
format.
62
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to the recipient.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Broadcast
Menu 2-6
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
• The phone is in the idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
If the message is long, press the
one or more times.
and
keys
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
The following options are available.
63
Messages
Messages
Read: lets you view the first message. Scroll through
the message using
or
. At the end of the
message, press the Next soft key to move to the
next message.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk (*) beside the name. When you select one of
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
Picture Messages
Menu 2-7
The phone allows you to send and receive text
messages that contain pictures. These messages are
called ‘Picture Messages’, several of which are preset
in the phone and can be replaced with new one
received from other sources.
displayed instead of the title.
Send Message: allows you to enter the destination
phone number; you must then press the O K soft key to
send the picture message.
Cut Number: allows you to extract a number from the
picture message, so that you can call the number or
save it in the phonebook.
Receiving a Picture Message
To view a message immediately you receive it, press
the Vi e w soft key. Press the right soft key to toggle
between viewing the message and the image.
The following options are available.
Save: allows you to save the picture message to your
picture message list.
Discard: allows you to discard the picture message
without saving it.
Cut Number: allows you to extract a number from the
picture message, so that you can call the number or
save it in the phonebook.
Note: This function is available between phones
supporting Nokia’s* Smart Messaging services.
Each picture message is made up of several text
messages;therefore, sending one picture
message may cost more than one text message.
The following options are available.
Write Message: allows you to write text to send
with the picture message.
Erase: deletes the picture message; Empty is
64
Picture messages are stored in the phone, you
cannot view them if you use your SIM in another
phone.
*
Nokia is a registered trademark of Nokia Corporation.
65
Voice Functions
Voice Functions
Voice Dial Record
You can use the Voice feature to customize various
settings, such as the:
• Voice Dial
• Voice Command
• Voice Memo
• Voice Active
Voice Dial
Menu 3-1
The voice dialling feature allows you to make phone
calls by saying a voice tag that has been added to a
desired name and phone number. Any spoken word, for
example a name, can be a voice tag.
Before using voice dialling, note that:
• Voice tags are not dependent on a language.They
are dependent on the speaker’s voice.
• The voice tags are sensitive to any background
noise. Where possible, record voice tags or make
calls in a quiet environment.
• When recording a voice tag or making a call, hold
the phone in the normal position close to your ear.
• The maximum length for a voice tag recording is
about 1.5 seconds, but very short names are not
recorded
• You can store up to twenty voice tags in the
phone’s memory.
66
Allows you to record name tags and allocate them to
numbers for voice dialling.
Say the name you want to use for voice dialling after
you hear a voice prompt. For best results, use names
with at least two syllables, or use both a first and
last name. The phone stores the name as a “first”
sample, and then prompts you to say the name
again.
Respond to the prompt by repeating the name. The
phone stores the name as a second sample and then
requests the phone number.
To store the number, press the O K soft key. Follow
the instructions described on page 41 to complete
storing the number into your internal phonebook.
Voice Dial Act
This option activates voice dialling.
You hear a voice prompt and Say Name is
displayed. Say the voice tag clearly. If no match for
the voice tag is found or recognized, the phone may
ask you to try again. The phone automatically dials
the number of a recognized voice tag.
Note: This option is only available once you have
recorded voice tags.
67
Voice Functions
Voice Functions
Voice Command
Voice Dial Delete One
Menu 3-2
Allows you to delete an individual voice tag. The
corresponding phone number remains in the
phonebook but the voice tag is deleted.
This menu allows you to get quick access to the
frequently used menus by saying your own voice
command.
If the name displayed is... Then press the...
You can select the following functions:
To be deleted
OK soft key.
Not to be deleted
or
key.
The next name is
displayed.
To exit the Voice Dial Delete One option, press the
soft key.
Voice Dial Play All
Voice Command Record: The most frequently used
menu functions are programmable with your own
voice commands. The menus are preset to OFF at the
factory, indicating that they are not recorded. When
voice commands are recorded successfully, the
menus are changed to ON in the display.
Voice Command Act: Use this menu to access the
menu of the recorded voice commands.
Allows you to play back all recorded voice tags.
Voice Command Play All: Plays all voice
commands you have recorded.
Voice Dial Delete All
Voice Command Delete All : Deletes all
commands you have recorded.
Allows you to delete all voice tags. The
corresponding phone numbers remain in the
phonebook but the voice tags are all deleted. Press
the OK soft key when the message ‘Delete All
confirm?’ is displayed.
Otherwise, press the Cancel soft key to exit the
function without deleting the voice tags.
68
Voice Memo
Menu 3-3
You can use the Voice Memo feature to :
• Record up to 3 voice memos
• Play the recorded voice memos
• Delete one or all voice memos
69
Voice Functions
Voice Functions
Voice Memo Record: Allows you to record a
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded
• Recording time counter
The maximum recording time is about 35 seconds.
If you want to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is
stored in the next memo location.
To stop recording, press the Stop soft key.
Note: If all memo locations are full, you must delete
an old memo before recording a new one.
Voice Memo Replay: Allows you to play back all
memos recorded, starting with the most recent
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded.
Voice Active
Menu 3-4
This setting automatically enables the voice dial or
voice command mode when you press the
key
in idle mode.
The following options are available:
OFF: The voice dial or voice command mode must be
activated manually.
Voice Dial: The voice dial mode is activated when
you press the
key in idle mode.
Voice Command: The voice command mode is
activated when you press the
key in idle
mode.
To skip to the next memo, press the Skip soft key, to
stop the playback, press the Stop soft key.
Voice Memo Delete One: Allows you to delete a
specific memo. All memos recorded are played back,
starting with the most recent one.
Voice Memo Delete All: Allows you to delete all
memos. Press the OK soft key to confirm.
70
71
Tones
Tones
You can use the Tones menu to customise various sound
settings, such as the:
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an error or
receive a message
Note: The silent mode allows you to turn the various
tones off when discretion is required. Press and
hold down
to toggle between activating and
deactivating the silent mode.
Ring Tone
Menu 4-1
This option allows you to select the required ringing tone.
There are 25 different tones available; 8 pre-defined ring
tones, 12 changeable tones*, 2 using the Melody
Composer and 3 by SMS.
You can change ringtones by downloading from the WAP
Browser.
Note:
• You can also change the changeable ringtones
by another downloading service. Please
contact your service provider or Samsung
service center to check its availability.
•This feature is only available if your service
provider supports it.
3. Select the ringing tone location you wish to save it
and press the OK soft key.
4. To use this tone as the current ringing tone, press
the Yes soft key. Otherwise press the No soft key.
If your SIM card supports the ALS feature, this option
also allows you to select a different ringing tone for
each line, and thus distinguish incoming calls.
Note: While downloading, if the battery is detached
from the phone, you can lose the downloaded
ringtones.
Melody Composer
Menu 4-2
This option allows you to compose your own melody
to be used as the ringing tone.
• Three octaves are available.
• A maximum of 50 notes can be entered.
• You can adjust the length of the notes and add
rests, as required.
Composing a Melody
1. To listen to the tone, press the Play soft key.
1. When you access the menu, the names of any
melodies created are displayed. Otherwise,
(Empty) appears. Select the melody that you wish
to create or edit.
2. To save the ring tone, press the Save soft key.
2. Press the Select soft key and compose your
melody using the following keys.
When you receive a ringing tone message, proceed as
follows.
*For further details, refer to http://www.samsungmobile.com
72
73
Tones
To...
Then press the...
Enter C, the first note
in the musical scale
key.
Enter D
key.
Enter E
key.
Enter F
key.
Enter G
key.
Enter A
key.
Enter B
key.
Move a note up or
down one octave
Enter a rest
key.
Delete notes
Move a note a
semitone up or down
Add # to a note or
not
3. When you are satisfied with your melody, press
the Yes soft key.
4. Enter a title for the melody.
key (press the key
until the rest is of the
required length).
key.
or
key (for
example, the note A changes
to A#, B, C, C#, and so on in
the scale each time you press
the
key).
key.
Change the length
of a note
key (the length
will be changed each time
you press the key).
Listen to your melody
Listen soft key.
Cancel your changes
74
Tones
Note: For further details on how to enter
characters, refer to page 35.
You are asked if the melody is to become the
ringing tone.
5. To use the melody as the ringing tone, press the
Yes soft key.
The melody is saved and is played each time your
phone rings.
Deleting a Melody
1. Select the melody that you wish to delete.
2. Press and hold
for a few seconds.
All notes are erased.
3. Press the Listen soft key. You are asked to
confirm that you wish to delete the melody by
pressing the Yes soft key.
Ring Volume
Menu 4-3
This option allows you to adjust the ringing volume
level.
Use the
or
keys. The greater the number
of bars, the greater the volume level.
key.
75
Tones
Alert Type
Tones
Menu 4-4
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
Message Tone
Menu 4-6
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
SMS Tone1 ~ SMS Tone5: the phone uses a SMS
tone.
Single Beep: the phone beeps once.
Vibration: the phone vibrates but does not ring.
Light Only: the service light on the top of the phone
flashes yellow.
Vibra+Melody: the phone both rings and vibrates.
Vibration: the phone vibrates but does not ring.
Keypad Tone
Error Tone
Menu 4-5
Menu 4-7
This option allows you to select the tone that the
keypad generates when you press a key. The
following options are available.
This option allows you to select how the phone
informs you that you have made a mistake. The
following options are available.
OFF: the keys do not make any sound.
OFF: the phone does not beep.
Tone: each key, when pressed, makes a different
sound.
ON: the phone beeps to indicate an invalid entry.
Beep: each key, when pressed, makes the same
sound.
76
77
Tones
Settings
Minute Minder
Menu 4-8
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call. The
following options are available.
OFF: the phone does not beep.
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Phone Settings
Menu 5-1
ON: the phone beeps every minute.
Greeting Message
Connect Tone
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
Menu 4-9
This option allows you to specify whether the phone
should beep when the phone connects to the
network. The following options are available.
To...
Then press the...
Clear the existing message
key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
For more information on how to enter characters,
refer to page 35.
To go back to the previous menu level without saving
your input, press
.
78
79
Settings
Settings
Own Number
Any-key Answer
Note: The contents of this menu may vary,
depending on the SIM card.
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
any key, except
,the Reject soft key or volume
keys.
To reject the call, press
or the Reject soft key.
The following options are available.
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Service, you can select a line with
or
.
The following options are available:
Edit: allows you to edit the name and number.
Erase: allows you to erase the name and number.
ON: you can press any key, except
soft key or volume keys.
OFF: you can only press
, the Reject
or the Accept soft key.
Language
Backlight
You can select the text language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
You can also set the default text input mode. For
details on the text input modes available, refer to
page 35.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
OFF: the backlight is not used.
80
81
Settings
Settings
Service Light
Caller ID
This option allows you to select whether or not the
service light on the top of the phone is used. The
following options are available.
You can prevent your phone number from being
displayed on the phone of the person being called.
ON: the service light flashes when the phone is
ready for use.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
OFF: the service light is not used.
Default: the default setting provided by the network
is used.
Auto Redial
Hide Number: your number is not displayed on the
other person’s phone.
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available.
ON: the number is redialled automatically.
OFF: the number is not redialled.
Auto Answer
With the Auto Answer function, the phone automatically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Note: This feature only operates when the phone is
connected to a car kit (optional).
82
Send Number: your number is sent each time you
make a call.
KeyLock Settings
With the key lock function, you can prevent accidental
key pressing.
15 seconds/ 30 seconds/ 1 minute/ 2 minutes:
When set, the lock icon( )is visible in the display
and your key input doesn’t work in idle mode. To
activate the key pad, press the left soft key and
press the
key. The keypad is automatically
locked if no key is pressed within the set time.
OFF: the keypad will not lock automatically.
Note: You can make the keypad lock manually by
pressing and holding the
key in
idle mode regardless of this key lock setting.
83
Settings
Settings
Reset Settings
Call Diverting
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
Note: Some call divert options may not be shown if
they are not supported by your network
operator.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Note: The password is preset to 0000. To change this
password, refer to page 95.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways.
Active Line
Some SIM cards may be used with two subscriber
numbers (network service). This function is available
only if your SIM card supports it.
This menu allows you to select the line to be used
when making calls. However, calls can be answered
on both lines, regardless of the line selected. When
you select a line, the line number appears as an
indicator after the operator/service provider’s names.
When you select the Manual option, you can choose
a line whenever you access the call barring, diverting
and waiting features; the active line is not displayed.
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already on the
phone.
No Reply: calls are diverted if you do not answer the
phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Unavailable: calls are diverted if you are busy, do not
answer or cannot be reached.
Cancel All: all call diverting options are cancelled.
Network Services
Menu 5-2
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
84
Note: These options may be different, depending on
the SIM card.
You can specify individual diverting options for each of
the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in use)
85
Settings
Example: You can:
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
Settings
3. Press the Remove soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing
or
until the appropriate
option is highlighted, and then press the Select
soft key.
2. Select the type of calls to be diverted by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your settings.
4. Enter the number to which the calls are to be
diverted.
To enter the international code, press and hold 0
until the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the Options soft key,
followed by PhoneBook or Voice Server
Number.
5. When you are satisfied, press
or the OK soft
key.
The phone sends your setting to the network and
the network’s acknowledgement is displayed.
To deactivate specific call diverting settings, proceed
as follows.
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
86
Note: When all calls are diverted, one of the
indicators below is displayed on the last line of
the display,if supported by your SIM card.
Divert Line 1: all calls from line 1 are diverted.
Divert Line 2: all calls from line 2 are diverted.
Divert All: all calls from lines 1 and 2 are
diverted.
Call Barring
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
87
Settings
To set your call barring options, proceed as follows.
1. Select the type of call barring required by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the
or
key until the appropriate option
is highlighted and then press the Select soft key.
Settings
Change Barring Password: you can set and
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
Call Waiting
3. Press the Activate soft key to confirm your
settings.
This network service enables you to be informed when
someone is trying to reach you during another call.
4. Enter your call barring password supplied by your
service provider.
To set your call waiting options, proceed as follows.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call barring settings, proceed
as follows.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
1. Select the type of calls to which the call waiting
option is to be applied by pressing
or
until the appropriate option is highlighted and
then press Select.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
3. Press the Remove soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
To deactivate specific call waiting settings, proceed
as follows.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
88
89
Settings
Settings
Network Selection
Line Identification
The Network Selection feature enables you to
indicate whether the network used when roaming
(outside your home area) is selected automatically or
manually
This option allows you to view the following line
identification settings.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Select is displayed, press the
Select soft key.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
2. Press
or
until the appropriate option is
highlighted and press the OK soft key.
If you select Automatic, you are connected to the
first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press
or
until the preferred network is
highlighted and press the OK soft key.
You are connected to that network when roaming.
90
91
Settings
Settings
Closed User Group (CUG)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you are
asked if you wish to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
Deactivate: deactivates the CUG function.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
To...
Scroll through the
existing CUG indexes
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
Security Settings
Menu 5-3
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 122).
Then press the...
or
key.
Add a new CUG index
Options soft key, select
Add and enter the index.
Delete a CUG index
or
key to select
the index to be deleted,
press the Options soft key
and select Delete.
92
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
93
Settings
Settings
PIN Check
The following options are available.
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Enable: you are required to enter the phone
password when you switch the phone on.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available.
Enable: you must enter the PIN each time the phone
is switched on.
Disable: the phone connects directly to the network
when you switch it on.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Change Password
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
The password is factory set to 0000. Once you have
entered a new password of up to 4 digits, you are
asked to confirm it by entering it again.
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
Fixed Dialling
The Fixed Dialling, if supported by your SIM card,
allows you to restrict your outgoing calls to a limited
set of phone numbers.
The password is factory set to 0000. To change the
phone password, refer to the Change Password
menu option (5-3-4).
Once the correct password has been entered, you
can use the phone until you switch it off.
94
95
Settings
Settings
The following options are available.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Disable: you can call any number.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
LCD/LED Settings
Menu 5-4
The LCD/LED Settings menu enables you to set the
style of the LCD display.
Clock: The LCD displays an analogue clock. To
display the normal mode for a while, press any key.
Select Image
This option allows you to select the image to be
displayed when you set the Screen Mode option to
Image Display. You can select one of images.
LCD Contrast
This option allows you to adjust the contrast of the
LCD screen. Press
to increase or
to
decrease the contrast.
Service Colour
There are six colours available for the service light:
normal (green), yellow, orange, violet, blue and sky
blue.
You can scroll through these colours, by pressing the
or
key. Press the Select soft key to select
the required colour.
Screen Mode
You can select the screen image to be displayed in
idle mode.
Normal Mode: the LCD displays <Service
Provider> and the current time and date.
Image Display: The LCD displays the image
selected via the Select Image option. To display the
normal mode for a while, press any key.
96
97
Settings
Browser Settings
Menu 5-5
Note: This menu may not be shown, depending on
your network service provider.
You can set up several proxies, using the Proxy
Settings menu (5-5-1), and you can designate one
as the current proxy, using the Current Proxy menu
option (5-5-2). The following parameters must be set
for each proxy; they may vary depending on your
service provider. Contact your service provider for
further details.
Proxy Name: name of the proxy server.
WDP Address: IP address required to connect to
the Internet.
Port Number: number of the port to be used to
connect the gateway.
Home URL: URL of your home Web site.
Access Point
• NAS Phone Number: PPP server phone number.
• Login Name: PPP server login ID (may be optional).
• Password: PPP server password (may be optional).
• Network Type: V.32 Transparent, V.32 NonTransparent, V.110 Transparent or V.110 NonTransparent.
98
Organiser
The Organiser feature enables you to:
• Write your schedule
• Use a calculator
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• Find out what time it is in various cities around
the world
Scheduler
Menu 6-1
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
When you access the Scheduler menu, the
following options are available.
Go to date: allows you to enter a particular date and
schedule an event on that date.
View All: shows the events scheduled.
Delete All: deletes all scheduled events.
99
Organiser
To schedule a new event, proceed as follows.
1. When the calendar is displayed, use the
and
keys to select the month, the
and
keys to select the week and the
and
keys to select the day. You can also use the
Go to date menu option to specify the date.
Note: To exit the Calendar screen, press
.
The phone returns to the previous menu
level.
2. Press the O K soft key.
3. Select a schedule type. Four types are available.
Reminder: requires a description and the time.
Call: requires a phone number and the time.
Meeting: requires a description and the time.
B i rthday: requires a name and the time.
4. Enter the appropriate information, referring to
page 35 for further details on how to enter text if
necessary.
5. If you wish to set the alarm to ring on the
scheduled date and time, select Yes. Otherwise,
select No.
6. If you selected Yes, set the time for the alarm
and press OK.
Organiser
A date that has a schedule already associated is
displayed in bold. If you select such a date, you will
see the contents.
Note: If you have scheduled more than one event on
a given day, you can scroll to the required
event by pressing
or
.
The following options are available.
Add: allows you to add new contents.
Delete: deletes the scheduled event.
Move: moves the scheduled event to a new date.
Copy: copies the scheduled event to a new date.
Delete Day: deletes all events scheduled on that
date.
Alarm
Menu 6-2
This option allows you to set the alarm to ring at a
specific time when your phone is switched on. You
can set one or more alarms.
The following alarms are available.
Daily Alarm: the alarm rings every day at the same
time.
Once Alarm: the alarm rings only once and is then
deactivated.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
The Alarm Tone option allows you to select a
specific tone for the alarm.
100
101
Organiser
To set the alarm, proceed as follows.
1. Select an alarm type by pressing the Select soft
key.
The Set Alarm option allows you to set the alarm
time or days of the week.
2. If you choose Weekly Alarm, select the required
day of the week and press
.
The * symbol appears to indicate that the day is
selected.
To remove it, press
.
You can set more than one day.
3. Press the OK soft key.
4. Enter the required time, then press the OK soft
key.
Alarm Activated is displayed.
The alarm icon ( ) appears in the top line of the
display. The service light flashes in white when the
alarm rings. To stop the alarm when it rings, press
the Exit soft key or press any key.
To deactivate the alarm, select Remove Alarm.
102
Organiser
Calculator
Menu 6-3
You can use the phone as a 9-digit calculator. The
calculator provides the basic arithmetic functions:
addition, subtraction, multiplication, division,
percentages.
To use the calculator, proceed as follows.
1. Enter the first number using the number keys.
2. Press the Operator soft key until you find the
appropriate arithmetic symbol: + (add),
- (subtract), x (multiply), / (divide).
3. Enter the second number.
4. Repeat Steps 2 and 3 if necessary.
5. To calculate the result to two decimal places,
press the Equal soft key or the
key.
To erase any mistakes or clear the display, press
the
key.
To enter a decimal point, press the
key.
103
Organiser
Organiser
World Time
Examples:
Expression
12*3+5=
34+57=
45+57=
48-23=
14-23=
68*25=
68*40=
35/14=
98/14=
Key Sequence
12x3+5
(or )
34+57
(or )
45
(or )
48-23
(or )
14
(or )
68x25
(or )
40
(or )
35/14
(or )
98
(or )
10% of 200
10=? % of 100
200x10
10/100
20
10
10% premium of 200 200+10
10% discount of 200 200-10
220
180
square of 4
reciprocal of 8
4x
8/
(or
(or
)
)
Result
41
91
102
25
-9
1700
2720
2.5
7
16
0.12
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
cities using the
or
key.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone by
pressing the
or
keys one or more
times.
The local date and time are displayed.
2. Press the Set soft key.
3. To...
Note: When you have finished with the calculator,
press
to return to the previous menu level.
104
Menu 6-4
Then press the...
Update the current
date/time with this
new setting
Set Local soft key.
Indicate that the
time zone is currently
using the daylight
saving time
Set DST soft key.
A check mark is shown
next to the time
difference.
Indicate that the
time zone is no longer
using the daylight
saving time
Remove DST soft key
(only available when a
check mark is shown
next to the time
difference).
105
Organiser
Clock
Games
Menu 6-5
Set Time
This option allows you to change the time displayed,
using the 24-hour system.
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (6-4).
Using this menu you can also enjoy games on the
phone.
Scroll to the desired game and press the Select soft
key.
The following options are available.
Set Date
New Game: allows you to start a new game.
This option allows you to change the date displayed.
Enter the day, month and year, using the format
specified in the option below.
High Score: show you the high score list.
Format
Key Info.: shows you the key usage.
Continue: allows you to enjoy the paused status. It
enables only when the game was paused before.
This option allows you to select the date format:
While you are playing a game,
• DD/MM/YYYY (day, month, year)
• MM/DD/YYYY (month, day, year)
To...
adjust the game volume
Then press the...
volume keys
toggle the backlight
on and off
pause the game
pause and exit the game
106
107
Games
Games
If, on finishing you are ranked within the top five
highest scores, you will be allowed to enter a name of
up to 10 characters.
Here are the list of available characters or function.
1: . @ - _ / : ~ 1
2: A B C 2
3: D E F 3
4: G H I 4
5: J K L 5
6: M N O 6
7: P Q R S 7
8: T U V 8
9: W X Y Z 9
0: 0
: to clear a previous character
left/right soft key: to move the cursor left or
right
: to move the cursor to the next position
Squares
Menu 7-1
top right of the display.
When you start a new game, press any key to
display the game setting menu.
To...
Then press the...
scroll up or down menu
level up/ down
or
left soft key /right soft
key
start a game
Key Commands
2: move up
8: move down
4: move left
5: rotate
Fortress
Menu 7-2
Object
Object
The goal of the game is to remove the required number
of blocks by joining the falling pieces together. A block
is a collection of 3 or more pieces that have been
correctly joined together. When this is achieved the
block is automatically removed from the screen and any
remaining pieces will move across the screen were
possible. Each piece can be moved and rotated as it
falls. There are three kinds of special pieces; ‘H’ breaks
all pieces in a horizontal line, ‘V’ breaks all pieces in a
vertical line, and ‘S’ breaks all pieces around it.
Each level is completed when you have removed the
specified number of blocks shown as ‘Remain’ in the
108
The goal of the game is to defend the earth against
UFOs. You can check the appearance of UFOs in the
radar at the bottom of the screen. Each level is
completed if you manage to defend the city without
running out of time or energy. You can monitor your
energy and remaining time in the left and right parts
of the radar.
When you start a new game, you see a map of the
earth. The ‘V’ marks mean you have already
defended that city. Press any key to start the game.
109
Games
WWW Services
Key Commands
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
2: move up the cannon
8: move down the cannon
4: move left the cannon
6: move right the cannon
5: shoot
Ice Cave
Menu 7-3
Object
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (5-1-2).
Home
Menu 8-1
The goal of the game is to move eggs into the hole
in ice cave safely within the given period of time.
The penguin can push the egg, push pieces of ice
that are blinking and jump. The egg will break if it
falls from higher than 4 steps.
You can see the ‘T’=time, ‘L’=life, and ‘S’=stage
information on the right side of the display.
To launch the browser from the idle mode, press
the
key on the right side of the display, or
press the Menu soft key, followed by the
and
keys.
When you start the game and the initial animation
finishes, you can adjust the stage using the left or
right soft key. Press the
key to start the stage.
To exit the browser at any time, press the
The idle screen is displayed.
Once connected, the homepage is displayed. The
content depends on the service provider.
key.
Key Commands
2: scroll up the screen
8: scroll down the screen
4: move left
6: move right
5: jump
#: retry
110
111
WWW Services
Bookmark
WWW Services
Menu 8-2
Goto
Menu 8-3
You can open any WWW page by entering its URL
address.
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
To enter the URL address directly, proceed as follows.
To access the Bookmark feature, proceed as follows.
1. In idle mode, press the Menu soft key.
2. Press
for WWW Services.
3. Press
for Bookmark.
4. Highlight the required bookmark using the
key and press the Select soft key.
or
5. Press the Options soft key.
Three options are available.
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 16 characters).
2. Press the O K soft key.
3. Enter the URL address (up to 128 characters).
1. In idle mode, press the Menu soft key.
2. Press
for WWW Services.
3. Press
for Goto.
4. Enter the URL address and press the G o soft key.
Navigating with the WAP Browser
You can surf the Internet using either the phone keys
or the WAP Browser menu.
Using the Phone Keys
When surfing the Internet, the phone keys function
differently from the phone mode.
4. Press the O K soft key.
To...
Go: allows you to open the selected page.
Delete: allows you to delete the selected bookmark.
112
Scroll each line of the
content area
Then press the...
or
.
Return to the previous page
key (except on
the homepage).
Return to the startup
homepage
key and hold it
down anywhere.
113
WWW Services
WWW Services
Using the WAP Browser Menu
Show URL: shows the URL of the current page.
HomePage: moves to the homepage.
There are various menu options available when
surfing the Wireless Web.
To access the WAP Browser menu, proceed as
follows.
Outbox: stores outgoing requests from the browser so
that they can be processed at a later date.
1. Press
.
A list of menu options appears.
2. Highlight the required option using the
key.
Offline Services: allows you to copy and save Web
pages so that you can view them, even if the network
is down.
or
Restart Browser: clears the cache memory and
displays the homepage.
3. Press the O K soft key to select the option.
Encryption: allows you to check and generate the
security key required to contact a server.
4. If necessary, select the secondary option by
pressing the
or
key, followed by O K.
Entering Text, Numbers, or Symbols
Note: The WAP Browser menus may vary,
depending on your version of the browser.
The following options are available.
Reload: reloads the current page.
Home: takes you back at any time to the homepage
of the Wireless Web service provider.
About Openwave: shows the version of the WAP
Browser.
Advanced...: gives you access to the following
advanced features. Some features may not be
supported by your network operator.
When you are prompted to enter text, the current text
entry mode appears above the right soft key:
abc/Abc/ABC, NUM or SYM 1 ~ 4. To change modes,
press the right soft key until the required mode is
displayed.
abc/Abc/ABC: allows you to enter lower-case and
upper-case letters. You can switch between lowerand upper-case letters by pressing the
key.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the
More soft key.
NUM: allows you to enter numbers.
114
115
WWW Services
Additional Services
If you wish to edit text, move the cursor to the
required position, using the
or
key and
clear the wrong letter by pressing the
key. Then
enter the correct letter.
Network Connection Information
To check the network connection time, press and
hold down the
key. You can see the connection
time on the last line of the content area. The linger
time is one or more minutes (depending on your
service provider). Consequently, if you do not use the
browser for one or more minutes, the network is
disconnected automatically. In this case, you can see
that the connection time is stopped at that point.
The connection time is reset whenever you exit the
browser.
ALS (Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to it.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
1. Selecting a Line
With the Active Line menu option (5-1-#), you can
set a line to be used automatically when you make a
call or you can select the line manually for each call.
For further details, refer to page 84.
2. Editing the Line Name
You can edit the name of each line via the O w n
Number menu option (5-1-2).
When you edit the name of a line, the name is
displayed, whenever necessary, instead of “Line 1” or
“Line 2”. For further details, refer to page 80.
116
117
Additional Services
3. Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
with the Ring Tone menu option (4-1). See page 72
for further details.
4. Setting Call Diverting Options
You can set up call diverting options for each line, via
the Call Diverting menu option (5-2-1). This service
enables you to divert calls received on a given line to
the number specified. See page 85 for further details.
118
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
119
Solving Problems
“No service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was not dialled
• Have you pressed
?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on ( pressed for more
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you switched off the microphone
( appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
120
Solving Problems
The phone starts beeping and “** Warning **
Battery Low” flashes in the display
• The battery is insufficiently charged. Replace the
battery with a charged one and recharge it or
connect the battery charger.
The audio quality of the call is poor
• Check the signal strength indicator in the display
( ); the number of bars after it indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
phonebook entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
121
Access Codes
Access Codes
PIN
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The access codes (except for the PUK and PUK2
codes) can be changed using the Security Settings
menu options (5-3). See page 93 for further details.
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. The PIN is
usually supplied with the SIM card. When the PIN
Check feature is enabled (menu option 5-3-1), the
PIN is needed each time the phone is switched on.
Phone Password
If you key in an incorrect PIN three times in
succession, key in the PUK and press the OK soft key.
Key in a new PIN and press the OK soft key. Key in
the new PIN again and press the OK soft key.
The phone password can be set to avoid unauthorised
use of the phone. The password generally supplied
with the phone is 0000. You are advised to change it
before you start using your phone.
PIN2
Keep the new password secret and in a safe place,
separate from the phone.
The PIN2, supplied with some SIM cards, is required
to access specific functions, such as call cost
counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the OK soft
key. Key in a new PIN2 and press the OK soft key.
Key in the new PIN2 again and press the OK soft
key.
122
123
Access Codes
PUK
The PUK (Personal Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the SIM
card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in succession,
the SIM card cannot be used anymore. Contact your
service provider for a new card.
You cannot change the PUK. If you lose it, contact your
service provider.
PUK2
The PUK2, supplied with some SIM cards, is required to
change a blocked PIN2.
If you key in an incorrect PUK2 ten times in succession,
you cannot use the functions requiring the PIN2. Contact
your service provider for a new card.
You cannot change the PUK2. If you lose it, contact your
service provider.
Health and Safety
Information
SAR Certification Information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It
is designed and manufactured so as not to exceed the
limits for exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part
of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines were developed by independent scientific
organisations through the periodic and thorough
evaluation of scientific studies. The limits include a
substantial safety margin designed to ensure the safety
of all persons, regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by the
EU Council is 2.0W/kg.*
The highest SAR value for this model phone was 0.882
W/kg
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password from
your service provider when you subscribe to this function.
124
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram
(W/kg) averaged over ten grams of body tissue. The limit incorporates a
substantial margin of safety to give additional protection for the public
and to account for any variations in measurements. The SAR values may
vary depending on national reporting requirements and the network
band.
125
Health and Safety Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to
reach the network. In general, the closer you are to a
base station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a
new battery. warranty applicable to the unit.
126
Health and Safety Information
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
127
Health and Safety Information
Health and Safety Information
Road Safety
Electronic Devices
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, make sure that you are following the special
regulations in a given area or country.
Pacemakers
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it is
recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
128
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
129
Health and Safety Information
Health and Safety Information
Potentially Explosive Environments
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies,
for example).
130
131
Health and Safety Information
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary by
location.
3. Press the <SEND> key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Other Important Safety Information
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
132
Health and Safety Information
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or in
the air bag deployment area. If wireless equipment
is improperly installed and the air bag inflates,
serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories out
of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
• Do not touch the phone with a wet hand while it is
charging.
133
Health and Safety Information
Doing so may cause an electric shock to you or
damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such
as a microwave oven, a stove or a radiator. The phone
may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you,
and if necessary, arrange for service.
134
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
ALS (Alternate Line Service)
Capability of associating two alternate lines with one
SIM card. You can make and receive calls on either
line as required.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
135
Glossary
Glossary
GSM (Global System for Mobile Communication)
PUK (PIN Unblocking Key)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Line Identification Services
Roaming
Service allowing subscribers to view or block the
telephone numbers of callers.
Use of your phone when you are outside your home
area (when travelling for example).
Multiparty Calling
SIM (Subscriber Identification Module)
Ability to establish a conference call involving up to
five additional parties.
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM card
against unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
136
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
137
Glossary
Index
Soft Keys
Keys marked
and
on the phone, the purpose
of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
A
ABC text mode • 38
Access codes • 122
Accessories • 9
Active Line (5-1-#) • 84
Alarm (6-2) • 101
Alert Type (4-4) • 45; 76
ALS • 117
Answering
a call • 25
a second call • 31
Any-key Answer (5-1-4) • 81
Auto Answer (5-1-8) • 82
Auto Redial (5-1-7) • 82
B
Backlight • 14; 81
Barring
calls (5-2-2) • 87
password • 89; 124
Batteries
charging • 18
installing • 15
low battery indicator • 19
precautions • 125
Broadcast (2-6) • 63
Browser
settings (5-5) • 98
using (8) • 111
C
Calculator (6-3) • 103
Caller ID (5-1-9) • 83
Calls
answering • 25
a second call • 31
barring (5-2-2) • 87
cost (1-5) • 57
dialled (1-3) • 56
diverting (5-2-1) • 85
emergency • 8; 131
ending • 23
holding • 30; 89
international • 22
making • 22
missed (1-1) • 26; 55
multiparty • 32
received (1-2) • 55
records (1) • 55
138
Calls (continued)
redialling • 23
automatically • 82
rejecting • 25
searching for a number in
the phonebook • 46
time (1-4) • 56
via the phonebook • 41
waiting (5-2-3) • 89
Card
installing SIM • 15
Care • 133
Changing
call barring
password • 89
password (5-3-4) • 95
PIN (5-3-2) • 94
PIN2 (5-3-7) • 96
text modes • 36
Characters
changing modes • 36
entering • 35
Charging batteries • 18
Clock (6-5) • 106
type • 97
Closed User Group
(5-2-6) • 92
Colour
service light • 14; 97
Composer
Melody (4-2) • 73
Conference calls • 32
Connect
to Voice Mail (2-1-1) • 59
Tone (4-9) • 78
Contrast (5-4-3) • 97
Copying phonebook
numbers • 44
Cost of calls • 57
CUG (5-2-6) • 92
D
Date
format (6-5-3) • 106
setting (6-5-2) • 106
Deleting
missed calls • 27
phonebook numbers • 44
schedules • 101
139
Index
Index
L
N
Earpiece volume • 24
Editing
messages • 61
missed calls • 27
phonebook numbers • 44
schedules • 101
Emergency calls • 8; 131
Erasing
missed calls • 27
phonebook numbers • 44
schedules • 101
Error Tone (4-7) • 77
Language (5-1-3) • 80
Last number redialling • 23
automatic • 82
LCD
layout • 12
settings (5-4) • 96
LED indicator • 14
Length of calls • 56
Letters
changing modes • 36
entering • 35
Line
active • 84
identification (5-2-5) • 91
Locking
keypad • 21;83
phone (5-3-3) • 94
SIM card (5-3-5) • 95
Low battery indicator • 19
F
M
Names
entering • 35
searching/dialling • 46
storing in the
phonebook • 41
Network Selection
(5-2-4) • 90
Network Services (5-2) • 84
Numbers
copying phonebook • 44
correcting • 22
editing
missed call • 27
phonebook • 44
entering • 40
erasing phonebook • 44
fixed dial • 95
mode • 40
own • 80
redialling • 23
automatically • 82
searching/dialling • 46
storing • 41
Dialled Calls (1-3) • 56
Dialling • 22
Display • 12
contrast • 97
icons • 13
language • 80
Diverting calls (5-2-1) • 85
E
Fixed Dial Number (FDN)
mode (5-3-6) • 95
Functions
selecting • 48
G
Games (7) • 107
Greeting Message
(5-1-1) • 79
Groups
user • 92
H
Holding calls • 30; 89
I
Icons • 13
Identifying a caller • 83
Image
screen • 96
K
Key tones
muting • 34
selecting • 76
sending • 34
volume • 24
Keypad locking • 83
Keys • 10; 11
140
Maintenance • 133
Melody Composer (4-2) • 73
Memory status • 45
Menus • 50-54
Messages
broadcast (2-6) • 63
greeting (5-1-1) • 79
operator logo • 58
picture (2-7) • 64
preset (2-4) • 62
reading (2-2) • 59
ringtone • 73
setup (2-5) • 62
tone (4-6) • 77
voice mail (2-1) • 58
writing (2-3) • 61
Microphone mute • 28
Minute Minder (4-8) • 78
Missed calls (1-1) • 26; 55
Multiparty calls • 32
Mute
key tones • 34
microphone • 28
O
Operator logo• 58
Options
selecting • 48
Organiser (6) • 99
Own Number (5-1-2) • 80
P
Password
barring • 124
changing • 89
phone • 122
changing (5-3-4) • 95
Pasting numbers • 44
Phone
Lock (5-3-3) • 94
password • 95; 122
settings (5-1) • 79
Phonebook • 41
alert tone • 45
colours • 45
copying numbers • 44
dialling • 46
editing numbers • 44
erasing numbers • 44
making calls • 23; 46
memory status • 45
options • 43
pasting numbers • 44
ring tones • 45
searching/dialling • 46
storing numbers/
names • 41
Picture Messages (2-7) • 64
PIN • 123
changing (5-3-2) • 94
checking (5-3-1) • 94
PIN2 • 123
changing (5-3-7) • 96
Preset Message
List (2-4) • 62
Problem solving • 119
PUK • 124
PUK2 • 124
R
Read Messages (2-2) • 59
Received calls (1-2) • 55
Records
call (1) • 55
Redialling
automatically • 82
last number • 23
Rejecting calls • 25
Reset Settings (5-1-*) • 84
Ring
tone (4-1) • 72
type • 75
volume (4-3) • 75
ringing tone messages • 76
Roaming • 90
S
Safety
batteries • 126
information • 125
precautions • 7
Scheduler (6-1) • 99
preset (2-4) • 62
SDN • 47
Searching for names/
numbers • 46
Security (5-3) • 93
Selecting functions/
options • 48
Sending
key tones • 34
messages • 61
141
Index
142
• Each of the two soft keys (
)
performs the function indicated by the
text above it (bottom line in the display).
Press the Accept soft
key.
Answer a Call
.
Briefly press
End a Call
➄ Press the left soft key to
confirm.
Adjust the
Earpiece
Volume
Press
or
during a call.
.
➁ Press
➀ Key in the number.
Make a Call
Switch On/Off Press and hold down
.
➃ Scroll with
or
through the list of
options until the required
option is selected.
Waiting
calls • 30; 89
WAP Browser • 111
World Time (6-4) • 105
Write Messages (2-3) • 61
WWW Services (8) • 111
➂ Press the Select soft
key.
W
Quick Reference Card
Vibration • 75
Voice Active (3-4) • 71
Voice Command (3-2) • 69
Voice Dial (3-1) • 66
activating • 67
deleting numbers • 68
playing recorded
names/numbers• 60
recording • 67
earpiece • 24
Voice Functions (3) • 66
Voice Memo (3-3) • 69
deleting • 70
recording • 70
replaying • 70
Voice Server Number
(2-1-2) • 59
Volume adjustment
earpiece • 24
game • 107
keypad • 24
ring (4-3) • 75
SGH-N620E GSM Telephone
V
➁ Scroll with
or
through the list of menus
until you reach the
required menu.
Text
changing modes • 36
entering • 35
Time
call (1-4) • 56
format • 106
setting (6-5-1) • 106
world (6-4) • 105
Tone
connect (4-9) • 78
error (4-7) • 77
keypad (4-5) • 76
melody • 73
message (4-6) • 77
ring (4-1) • 72
Travel adapter • 18
T9 mode • 36
User groups • 92
➀ Press the Menu soft key.
T
U
Access
the Menu
Function
Service
colours • 97
dialling numbers
(SDN) • 47
light (5-1-6) • 14; 82
Settings
alarm • 101
browser • 98
date • 106
language • 80
LCD • 96
network • 84
phone • 79
reset • 84
security • 93
service colour • 97
time • 106
Setup (2-5) • 62
Silent mode • 11
SIM card
installing • 15
locking (5-3-5) • 95
precautions • 15
SMS
see Messages
Soft keys • 48
Solving problems • 119
Speed dialling • 45
Switching on/off
microphone • 28
phone • 20
Symbolic mode • 40
143
• 2 to 9
Press and hold down the
appropriate number key.
Speed-Dial
with SIM
Locations
• 10 and above
Press and hold
down
.
Press and hold
down
.
➁ Press the
key.
➂ Press the Dial soft key.
➀ Press the appropriate
keys.
Connect to
the Voice
Mail Server
Set the
Silent Mode
On/Off
Store
Numbers
in the
Phonebook
Search for
a Number
in the
Phonebook
➀ Type in the number.
➁ Press the Save soft key.
➂ Enter the name.
➃ Press the Save soft key.
➄ If necessary, change the
location.
➅ Press the OK soft key.
➀ Press the PhoneBook soft
key.
➁ Enter the start of the name.
➂ Press the Find soft key.
.
➃ To scroll through the names,
press
or
.
➄ To make a call, press