Sharp YO-190P Specifications

ELECTRONIC ORGANIZER
YO-190
OPERATION MANUAL
Instrucciones abreviadas en español
CONTENTS
Using the Organizer for the First Time .................................................. 1
When Abnormal Conditions Cause a Malfunction ................................. 1
Auto Power Off Function ...................................................................... 1
Backlight .............................................................................................. 1
Adjusting the LCD Contrast .................................................................. 2
Turning the Key Sound On and Off ....................................................... 2
Freeing Up Memory .............................................................................. 2
Display Symbols and Part Names ............................................................... 2
Entering Characters .................................................................................... 4
Note on the Description of the MENU Key Operations ................................ 4
Notes for the Built-in Calendar and the Time .............................................. 5
Clock Mode ................................................................................................ 5
Note on Storing the Listings in Each Mode ................................................ 7
Telephone/E-mail Mode .............................................................................. 7
WWW Mode ............................................................................................... 9
Calendar Mode ......................................................................................... 10
Schedule Mode ......................................................................................... 10
To Do Mode .............................................................................................. 13
Memo Mode ............................................................................................. 13
Expense Mode .......................................................................................... 14
Anniversary Mode .................................................................................... 15
Checking the Memory Storage ................................................................. 16
Freeing Up Memory .................................................................................. 16
Recalling the Listings ............................................................................... 16
Editing the Listings ................................................................................... 18
Deleting the Listings ................................................................................. 19
Calculator Mode ....................................................................................... 20
Conversion Mode ..................................................................................... 20
Secret Function ........................................................................................ 22
Transferring the Data ................................................................................ 24
Exchanging Data with a PC ....................................................................... 26
Battery Replacement ................................................................................ 30
Shortcuts .................................................................................................. 31
Specifications ........................................................................................... 32
Instrucciones abreviadas en español ...................................................... S-1
NOTICE
• SHARP strongly recommends that separate permanent written records be kept of all important data. Data may be lost or altered in virtually any
electronic memory product under certain circumstances. Therefore, SHARP assumes no responsibility for data lost or otherwise rendered
unusable whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired, or any other
cause.
• SHARP assumes no responsibility, directly or indirectly, for financial losses or claims from third persons resulting from the use of this product
and any of its functions, such as stolen credit card numbers, the loss of or alteration of stored data, etc.
• This Organizer is not designed to visit Web sites or transfer/receive e-mails by using the URL or E-mail addresses you will store.
• The information provided in this manual is subject to change without notice.
CAUTIONS
•
•
•
•
Do not carry the Organizer in the back pocket of slacks or trousers.
Do not drop the Organizer or apply excessive force to it.
Do not subject the Organizer to extreme temperatures.
Since this product is not waterproof, do not use it or store it where fluids can splash onto it. Raindrops, water spray, juice, coffee, steam,
perspiration, etc. will also cause malfunction.
• Clean only with a soft, dry cloth.
• Use only a SHARP approved service facility.
NOTES
• All company and/or product names are trademarks and/or registered trademarks of their respective manufactures.
Using the Organizer for the First Time
Auto Power Off Function
Be sure to perform the following operations before using the Organizer for
the first time.
When none of the keys has been pressed for approximately 7 minutes, the
Organizer automatically turns the power off to save the batteries. (The
actual time may vary depending upon the condition of use.) Press ON to
resume operation.
1. Press the RESET switch while holding down
switch and then release ON .
ON
. Release the RESET
“CLEAR ALL DATA OK (Y/N) ?” is displayed.
Backlight
The Backlight allows you to view the display and use the Organizer even in
low-light conditions. Pressing BackLight once illuminates the display for
as long as you continue to use the Organizer, until you have not typed any
key for the interval you set. (See the following section, “Setting up the
Backlight”.)
• To turn the Backlight off, press
• Under certain conditions the message may appear as “Data has been
impaired ! Press [Y] to CLEAR ALL memory”. Proceed to the next step
in either case.
2. Press
Y
.
3. The Organizer is now initialized. Proceed to set the date and time of the
clock. (Refer to page 5.)
Press the RESET switch with a ball-point pen or similar object. Do not use
an object with a breakable or sharp tip.
When Abnormal Conditions Cause a Malfunction
If the Organizer is subjected to strong, extraneous electrical noises or
shocks during use, an abnormal condition may occur in which no keys
(including ON and OFF ) will respond. If this happens, press the RESET
switch. Noises or shocks may erase some or all of the Organizer’s memory.
BackLight
again.
• The Backlight may remain on for less than the set interval or it may not
function if the battery level is very low.
• The Backlight does not function during data transfer.
★ Do not use the Backlight unnecessarily.
• Since the Backlight drains power from the operating batteries,
excessive use of the Backlight will significantly reduce the life of your
batteries.
• Do not continue using the Organizer after it has automatically turned
itself off while the backlight was being used. Even if it can be turned
on again, the clock time will be incorrect and other functions may not
work properly until the batteries are replaced.
Setting up the Backlight
You can change the interval after which the Backlight turns off
automatically.
1. Press MENU
PREV
PREV
4
4
to select “4: BACKLIGHT SETUP”.
2. Press
,
,
or
to select the
interval (15 – 60 seconds).
1
2
3
TURN OFF AFTER:
1: 15 SECONDS
2: 30 SECONDS
3: 45 SECONDS
4: 60 SECONDS
1
• A “ ” mark moves to your selection and you return to the mode in
which you were before pressing MENU .
Display Symbols and Part Names
Adjusting the LCD Contrast
1. Press
MENU
NEXT
2. Press
or
the display.
2
Display Symbols
: A “beep” will sound when a key is pressed.
to select “2: LCD CONTRAST”.
to darken or lighten
<
LCD CONTRAST
–DARK
–LIGHT
3. Press C•CE after adjusting the
contrast.
Turning the Key Sound On and Off
1. Press MENU PREV 1 to select “1:
KEY SOUND”.
2. Press 1 to turn the key sound on, or
press 2 to turn it off.
<
KEY SOUND
1: ON
2: OFF
: The schedule alarm will sound.
>
CAPS
: Capital (uppercase) letters will be entered. To enter small
(lowercase) letters, turn “CAPS” off by pressing CAPS .
EDIT
: The listing on the display can be edited.
2nd
: Indicates that 2nd has been pressed. Pressing another key in
succession, to which the special function is assigned, performs
the function, for example as introduced on page 31, “Shortcuts”.
>
S
: More information exists above the current display. (Press
.)
: More information exists below the current display. (Press
.)
: Secret function is in effect. (Secret listings cannot be recalled
without a password.)
: Indicates that the recalled listing is secret.
: Indicates that the operating battery level is low.
Freeing Up Memory
BATT
When you turn the power on, the following message may be displayed,
asking you to free up memory by deleting unnecessary space.
• In the display examples of this manual, only the symbols necessary for
explanation will be shown.
Press Y to delete space. Freeing up
memory needs a maximum of
approximately 2 minutes.
NOTES:
Press N when you wish to start
operation immediately.
(Refer to page 16.)
2
DO YOU WANT TO
FREE UP MEMORY ?
( Yes/No )
• The symbol “ ” shown by setting the LCD contrast to DARK is not
used in this product.
• The “ ” mark indicates the alarm sound for the scheduled listings is
turned on.
Part Names
Display
Cursor movement keys
Clear/Clear entry key
Mode keys
MENU key
Power ON/OFF key
Search keys
Option port
(3-pin option jack)
RESET switch
In this manual the keys are represented by symbols, for example:
&
7
→
→
&
: Indicates the & key.
7
: Indicates the numeric 7 key.
SCHEDULE
→
The
key
SCHEDULE
: Mode key with only one function.
: These keys are used to select capital (uppercase) or small (lowercase)
letters or to access the symbols above the number key(*1) and “ , ” and “ ”.
While holding down
, press the desired key to be entered.
*1 …
&,
, (, $, /, ^ , !, @, #, )
The italic and bold type style numbers and letters and space between
them for operation are shown as unboxed numbers and letters.
3
Entering Characters
Note on the Description of the MENU Key Operations
1.Moving the Cursor
The cursor ( _ ,
or
,
,
, or
.
) can be moved by pressing (or holding down)
To switch or scroll the menu screens displayed by pressing MENU , press
NEXT (or
) to move to the next screen, or PREV (or
) to move to
the previous screen.
2.Entering Characters
(1) Entering letters and numbers
After initializing the Organizer, the default setting for entering letters will be
capital (uppercase) letters. To enter small (lowercase) letters, turn “CAPS”
off by pressing CAPS .
• To enter “ ’ ” or “ : ”, press
,
or : while holding down
.
(2) Entering graphic symbols and special characters
Press SMBL to display the symbol entry mode, allowing a total of 90
symbols and characters to be selected. To select the symbol display
containing the desired symbol/special character, press NEXT (or
) or
PREV (or
), then press the corresponding number.
• The first display is determined by your previous choice. The 6 most
recently used symbols/special characters are stored and displayed on
this display.
Press
SMBL
to exit the symbol entry mode.
3.Making Corrections
(1) Inserting characters
Press INS to change the cursor from “ ” (replace) to “ ” (insert).
Press INS again to change the cursor from “ ” to “ ”.
(2) Deleting characters
Press DEL or BS to delete the character.
•
DEL and BS will not operate in some cases such as when you input
the time in Schedule mode or you are in Calculator mode. In these
cases, press C•CE and reenter.
• Press
4
C•CE
This Organizer offers a variety of functions which you choose from the 4
kinds of menus (see the following table).
to clear all characters on the current display.
Menu
<MODIFY>
Editing the Listings
Displaying the Index of the Listing
Deleting the Listings
Designating the File Names
<TOOLS>
Checking the Memory Storage
Adjusting the LCD Contrast
Using the Secret Function
Designating the Listings as Secret
Setting the Schedule Alarm
Summarizing the Expense Report
Freeing Up Memory
<UNIT TO UNIT>
Transferring the Data
<SETUP>
Setting the Home/World Clock
Selecting the Time System
Selecting the Date Format
Setting Up the Backlight
Turning the Key Sound On and Off
Turning the Alarm Sound On and Off
See page...
18
17
19
8
16
2
22
23
12
14
16
24
5
7
7
1
2
12
1. Press
Notes for the Built-in Calendar and the Time
CLOCK
once or twice to display the Home clock.
• The initial Home city after initialization of the Organizer is New York.
• Calendar, Schedule, Expense, and Clock modes allow you to enter the
desired date and time between Jan. 1, 1901 and Dec. 31, 2099.
2. Press MENU
• If an attempt is made to store an invalid time or date, you cannot move
the cursor to date entering, or store the time and date by pressing
ENTER . Enter the correct value and press ENTER again.
• “18.0” on the display indicates the time zone.
PREV
1
to select “1: CLOCK SETTING”.
4. Press NEXT or PREV to display the desired city which corresponds
to your local zone from the cities stored in the Organizer.
5. Press
Clock Mode
PREV
3. Press 1 to select “1: HOME CLOCK”.
ENTER
to set the Home city.
• Some city names are abbreviated on the display as follows:
The Organizer has both Home and World clocks. The display switches
between Home and World clock each time CLOCK is pressed.
Home clock
Home
city
World clock
HOME
NEW YORK
SAT JAN 1,2000
WORLD
( + 5:00 )
LONDON
SAT JAN 1,2000
12:00AM
Time
Day of the week/
Month/Day/Year
5:00AM
World
city
Time
Day of the week/
Month/Day/Year
“(+ 5:00)” indicates the time difference from the Home city.
1.Setting the Home Clock
(1) Setting and changing the Home city
Set your local city as the Home city by selecting its zone number.
Zone numbers are based on the distance of the zones from the international
date line (zone number zero). For example, there is a 13-hour difference
between the date line and London (London is 13 hours behind), so the zone
number for London is 13. Honolulu is 23 hours behind the date line, so its
zone number is 23.
HONG KONG → HONGKONG
NEW DELHI → DELHI
RIO DE JANEIRO → RIO
LOS ANGELES → L.A.
ANCHORAGE → ANC.
• Zone numbers 0, 14, and 15 have no city name on the display.
Zone
number
0
1
2
3
3.3
4
5
6
6.3
7
7.3
8
8.3
9
9.3
City
AUCKLAND
NOUMEA
SYDNEY
ADELAIDE
TOKYO
HONG KONG
BANGKOK
YANGON
DHAKA
NEW DELHI
KARACHI
KABUL
DUBAI
TEHRAN
Zone
number
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
City
MOSCOW
CAIRO
PARIS
LONDON
RIO DE JANEIRO
CARACAS
NEW YORK
CHICAGO
DENVER
LOS ANGELES
ANCHORAGE
HONOLULU
MIDWAY
The names and zone numbers of 27 cities are stored in the Organizer's
memory. (See the following table.)
5
(2) Setting the Clock
<Example> Set the date and time to April 12, 2001, 10:05 PM.
1. Press MENU
1. Press MENU PREV PREV 1 to select “1: CLOCK SETTING”.
2. Press 1 to select “1: HOME CLOCK ”.
HOME
NEW YORK
SAT JAN
• The cursor will flash.
3. Enter the hour and minutes.
1005 PM (For the 24-hour clock,
press 2205.)
[ 18.0 ]
1,2000
12:00AM
(Enter 2 digits each for both hour and minutes.)
4. Enter the month, day, and year.
04122001
Use
to skip entering a number that needs no change.
5. Press ENTER . The clock starts from 0 second.
• The time can be displayed using either the 12-hour AM/PM system
(default) or the 24-hour system. To change the time system, refer to
page 7, “Selecting the Time System”. In this example, set the 12-hour
clock. (Note: 12:00PM: noon, 12:00AM: midnight)
2.Using the World Clock
Changing the city for the World clock
1. Press MENU PREV PREV 1 to select “1: CLOCK SETTING”.
2. Press 2 to select “2: WORLD CLOCK”.
3. Press NEXT or
desired zone.
PREV
to display the city which corresponds to the
4. Press ENTER .
3.Registering a City Name not Found in the List
If you want to set the city for the World clock to Rome, for example (Rome
belongs to zone number 12, but is not included in the city list):
6
2. Press
2
3. Press
NEXT
PREV
PREV
1
to select “1: CLOCK SETTING”
to select “2: WORLD CLOCK”.
(or PREV ) to set the zone number to 12.
(Initially the city is Paris.)
4. Enter the city name (up to 8 characters).
ROME (Press DEL to delete
unnecessary character(s), if necessary.)
5. Press ENTER to store the new name.
WORLD
[ 12.0 ]
ROME
FRI APR 13,2001
4:05AM
• To register a city name for the Home clock, first display the Home clock
then press MENU PREV PREV 1 1 to select “1: HOME
CLOCK” and press
to move the cursor to the city name line.
• Only one changed city name can be stored in each of the Home and
World clocks.
• Each changed name is stored until you next change the zone number.
4.Setting Daylight Saving Time/Summer Time
If DST (daylight saving time/summer time) is used, the local time is
advanced one hour during the summer. Both the Home clock and World
clock can be set for DST as follows:
• DST can be set independently in either the Home or the World clock. For
example, if DST is set for the Home clock, it does not have to be set for
the World clock.
(1) Home clock
1. Press MENU
PREV PREV 1 to select “1: CLOCK SETTING”.
2. Press 1 to select “1: HOME CLOCK ”.
3. Enter the correct daylight saving time/summer time.
ENTER
2
PREV
PREV
1
to select “1: CLOCK SETTING”.
A “ ” appears on the display and DST is now set. Setting DST in the
World clock automatically sets the time one hour ahead.
• When DST is set for one World city, it is used for all cities displayed in
the World clock.
(3) Clearing DST
To clear DST, follow steps 1 to 4 for Home clock, or follow steps 1 through
3 for World clock.
5. Selecting the Time System
TEL/MAIL 1
NAME ?
2. Press 1 to select “12” (12-hour) or
press 2 to select “24” (24-hour).
TEL
↔
>
• A “ ” mark moves to your selection and you return to the mode in
which you were before pressing MENU .
6. Selecting the Date Format
The date format can be switched between MONTH/DAY/YEAR and DAY.
MONTH. YEAR.
TEL/MAIL 1
NAME ?
(
TEL/MAIL 2
NAME ?
TEL MODE )
(
E–MAIL MODE )
TEL MODE )
the same stored listing
the same stored listing
The time system can be switched between 12-hour (default) and 24-hour
format.
TIME SYSTEM
1: 12
2: 24
>
Telephone/E-mail Mode
(
<
<
DATE FORMAT
1: MONTH/DAY/YEAR
2: DAY.MONTH.YEAR
• If the memory is full, “MEMORY FULL” will be displayed briefly and the
listing cannot be stored. Delete unnecessary data and free up memory to
make enough space to store new listings. (Refer to page 16, 19.)
” disappears.
1. Press MENU PREV PREV 2 to
select “2: TIME SYSTEM”.
to
Note on Storing the Listings in Each Mode
to select “2: WORLD CLOCK”.
3. Press 2nd ENTER .
The “
3
2. Press 1 or 2 to select “MONTH/
DAY/YEAR” or “DAY. MONTH. YEAR”.
” appears on the display and DST is now set.
(2) World clock
1. Press MENU
2. Press
1. Press MENU PREV PREV
select “3: DATE FORMAT”.
to set the time as DST.
135
A“
2nd
135
4. Press
E-MAIL
↔
TEL/MAIL 2
NAME ?
(
E–MAIL MODE )
Telephone/E-mail listings can be accessed by pressing either the TEL or
E-MAIL . Both keys recall the same stored listings in their respective order
on the display.
TEL recalls and displays the listing in the following order: NAME →
NUMBER → ADDRESS → E-MAIL, while E-MAIL does the same in the
following order: NAME → E-MAIL → NUMBER → ADDRESS.
7
Further, Telephone/E-mail listings provide 2 files (TEL/MAIL1, TEL/MAIL2).
You can switch them for convenience by using one for business and one
for personal use. The files are cycled each time you press TEL or
E-MAIL .
In Telephone/E-mail mode, a listing consists of 4 entries: name, number,
postal address, and E-mail address. The maximum number of characters
that can be entered for each listing is 512 in all.
Name entry
Number entry
TEL/MAIL 1
NAME ?
(
→
Johns, Pat
NUMBER ?
Johns, Pat
201–265–5600
ADDRESS ?
4
to select “4: FILE
<
2. Enter the new name for TEL/MAIL1,
then press ENTER .
FILE NAME
1: [ TEL/MAIL 1 ]
2: [ TEL/MAIL 2 ]
]
3: [
URL
• You can skip changing a file name by
pressing ENTER .
• To cancel entering the file names, press
C•CE
twice.
3. Perform the same procedure as step 2 for TEL/MAIL2 and URL.
4. Press TEL ,
8
E-MAIL
, or
WWW
The number entry prompt is displayed.
6. Press ENTER , then enter the E-mail
address. For example,
You can change each file name in up to 10 characters long as follows:
1. Press MENU
NAME”.
3. Press ENTER .
Box G, Sharp Plaza, Mahwah,
New Jersey, 07430-2135, U.S.A.
1.Designating the File Names
to check the new file name(s).
>
Johns, Pat –
Johns, Pat
5. Press ENTER , then enter the
address. For example,
Address entry
←
2. Enter the name. For example,
201-265-5600
F 265-1234
→
E-mail address entry
1. Press TEL to display the TEL/MAIL1 entry prompt.
4. Enter the phone and fax numbers.
For example,
TEL MODE )
Johns, Pat
201–265–5600
Box G, Sharp Plaza,
E–MAIL ?
2.Storing the Telephone Listings
johns-P@sharpsec.com
7. Press ENTER .
Johns, Pat
201–265–5600
F
265–1234 –
Johns, Pat
201–265–5600
Box G, Sharp Plaza,
Mahwah, New Jersey,
07430–2135, U.S.A. –
Johns, Pat
201–265–5600
Box G, Sharp Plaza,
johns–P@sharpsec.co
m–
“STORED !” will be displayed briefly, then the listing will be displayed.
• To skip entering the number, address, or E-mail address, press ENTER
when “NUMBER ?”, “ADDRESS ?”, or “E-MAIL ?” is displayed. However,
the name entry cannot be skipped.
• Regardless of the entry order, the listings in the Telephone/E-mail mode
are stored internally according to the first character of the person’s name
in the following order:
Space
5. Press ENTER .
The remark entry prompt is displayed.
6. Enter the remark. For example,
New Jersey
7. Press
See also for Telephone/E-mail and WWW Mode
Recalling the Listings ................ 16
Editing the Listings .................... 18
Deleting the Listings .................. 19
ENTER
.
“STORED !” will be displayed briefly,
then the listing will be displayed.
Checking the Memory Storage .. 16
Freeing Up Memory .................. 16
Entering Characters .................... 4
SHARP ELECTRONICS C
http://www.sharp–us
New Jersey –
SHARP ELECTRONICS C
ORP.
http://www.sharp–us
a.com
New Jersey
• The maximum number of characters
(including “http://www.”) that can be entered for each listing is 512 in
all.
WWW Mode
WWW mode is used exclusively for storing name (Uniform Resource
Locator) and a remark to remind you of the URL contents. In this mode, a
WWW listing consists of 3 entries: name, URL, and remark.
1.Storing the WWW Listings
1. Press WWW to display the name entry
prompt.
URL
NAME ?
2. Enter the name. For example,
SHARP ELECTRONICS CORP.
3. Press ENTER .
The URL entry prompt including
“http://www.” (you can edit) is
displayed.
4. Enter the URL. For example,
sharp-usa.com
SHARP ELECTRONICS C
URL ?
http://www. –
SHARP ELECTRONICS C
http://www.sharp–us
a.com –
9
2.Returning the Calendar to the Current Date
Calendar Mode
Press
Calendar mode is selected by pressing SCHEDULE once or twice. Each
time you press this key, the display switches between Calendar and
Schedule modes.
01
4
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30
↔
Calendar mode
THU APR 12,2001
TIME ?
Schedule mode
1.Controlling the Monthly Calendar Display
The Organizer has a 5-line display and 5 weeks of a month can be
displayed. Use the following keys to control the display status.
NEXT
PREV
: displays the following or previous month.
• Hold down either of these keys for rapid recall.
: moves the cursor or scrolls the calendar up or down one week.
Year
Month
1. Press SCHEDULE once or twice to
display the Calendar mode.
• “ ” indicates the last week of the
month is hidden below. To display the
last week, press
until the cursor
scrolls into the next screen.
01
9
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
2. Press NEXT (or PREV ) to display the calendar for the next (or
previous) month.
• In the year display, a “ ’ ” is attached to the years 1901 to 1999, while no
mark is attached to the years 2000 to 2099.
• When you reset the Organizer, the calendar defaults to Jan. 1, 2000.
SCHEDULE in Calendar mode.
2nd
• The current monthly calendar will be displayed, and the current date will
flash.
See also ...
Recalling the Listings ................ 16
Schedule Mode
Schedule mode is selected by pressing SCHEDULE once or twice. Each
time you press this key, the display switches between Schedule mode and
Calendar mode.
A schedule listing consists of 3 entries: date, time, and detail. The
maximum number of characters for each detail is 512. In the date entry, 4
digits can be entered for the year and 2 digits each for the month, day, hour,
and minute.
1.Storing the Schedule Listings
There are 3 ways to enter the desired date:
(1) Enter the desired date in Calendar mode
(2) Enter the desired date with NEXT (or
(3) Enter the desired date directly
PREV
)
After the date has been entered, the entry of time and detail is the same for
all 3 ways.
(1) Enter the desired date in Calendar mode
<Example> Enter the following data.
“Lunch with Tom” from 11:30 AM to 1:00 PM on June 24,
2001.
1. Press 2nd SCHEDULE in Calendar mode to display the calendar for
the current date (April 12, 2001).
10
2. Press NEXT
24, 2001.
NEXT
to move the cursor to June
3. Press SCHEDULE to change to the
Schedule mode.
SUN JUN 24,2001
TIME ?
• Notice the tag (
that date:
Schedule items beginning in the morning or
schedule items without a specified time
Anniversary items
Schedule items beginning in the afternoon
Time entry prompt for June 24, 2001 is
displayed.
4. Enter the starting and ending time.
1130
AM
01
PM
(For the 24-hour clock, press 1130
) on the right of “24”. It indicates a scheduled item for
13
(2) Enter the desired date with NEXT (or PREV )
This is a convenient way of entering a nearby date. Press NEXT (or
PREV ) and change the display day by day until the desired date appears.
.)
“DESCRIPTION ?” is displayed.
• “:00” will be entered automatically.
<Example> Enter a schedule listing on April 17, 2001.
• You can enter schedule details without the ending time. Press ENTER
(or
) after entering the starting time to display the “DESCRIPTION ?”
prompt.
1. Press
• You can also enter schedule details without a specified time, except
details starting with a number. Skip entering time and start to enter
letters for the details as described in step 5.
3. Press NEXT repeatedly until the time entry prompt for April 17, 2001
appears. Enter the time and detail following the procedure for “(1) Enter
the desired date in Calendar mode” (from step 4) on page 10.
• The hour and minute should each consist of 2 digits.
• The time can be set using either the 12-hour or 24-hour format. When
you move the cursor to the next entry field, the time is displayed in the
format selected in the Time System of the MENU functions.
• If an attempt is made to store an invalid time, you cannot move the
cursor to the next entry field. Enter the correct time and follow the next
procedure.
5. Enter the schedule detail.
Lunch with Tom
• To switch between upper- and
lowercase letters, press CAPS .
6. Press ENTER to store the listing.
7. Now, press SCHEDULE to check if
the listing is stored in the memory.
SUN JUN 24,2001
11:30AM~ 1:00PM
Lunch with Tom –
01
6
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
SCHEDULE
once or twice to display the Schedule mode screen.
2. Press 2nd SCHEDULE to display the time entry prompt for the current
date (April 12, 2001).
(3) Enter the desired date directly
When the date is not close to the currently displayed date, the following
method is more convenient than the previous 2 ways.
<Example> Enter a schedule listing on June 26, 2002.
1. Press SCHEDULE C•CE to display
the date entry prompt.
2. Enter the date.
06262002
MM/DD/YYYY
MONTH :04
DAY
:12
YEAR :2001
3. Press ENTER .
The time entry prompt (or Calendar) for June 26, 2002 is displayed.
Enter the time and detail following the procedure for “(1) Enter the
desired date in Calendar mode” from step 4 (or from step 3) on page 10.
11
• If an attempt is made to store an invalid date, you cannot move to the
time entry prompt. Enter the correct date and follow the next procedure.
2.Schedule Alarm
Schedule alarm sounds for approximately 20 seconds when the time set for
a schedule listing is reached. Once a schedule item has been selected for
the alarm and the alarm has been turned on, the alarm will sound
automatically and the relevant item will be displayed even if the Organizer
has been turned off. The alarm can also be set to sound for secret items
without displaying the item.
<Example> Recall the listing for June 22, 2001 (Meeting at 10:00AM - 11:00AM).
1. Press 2nd SCHEDULE in Calendar mode to display the calendar for
the current date (April 12, 2001).
2. Press NEXT NEXT
to move the cursor to the scheduled
date, June 22, 2001.
3. Press SCHEDULE to change to the Schedule mode.
• When more than one schedule listings are stored for this date, press
NEXT or PREV to display the desired listing in the Schedule mode.
• You cannot set the schedule alarm to the listings with no time entry.
4. Press MENU NEXT NEXT 1 to select “1: SCHEDULE ALARM”.
5. Press 1 to select “1: ON”.
FRI JUN 22,2001
• You return to the mode in which you
10:00AM~11:00AM
were before pressing MENU .
Meeting
• A “ ” is displayed on the left of the
starting time for the scheduled item,
and an alarm sound mark (“ ”) is displayed on the left of the display.
• It is possible to perform steps 4 and 5 while you are entering the
schedule item.
• Pressing 2 to select “2: OFF” makes the “ ” disappear, and turns off
the schedule alarm.
• If the alarm time you attempt to enter has already passed, the message
“ALARM TIME ELAPSED!” appears briefly. Enter the correct alarm time.
12
• After the alarm sounds, “ ” will disappear and the scheduled item will
remain in the memory without “ ”.
• Even if “ ” is turned off and the scheduled alarm time has passed,
“ ” will not disappear from the display.
• The schedule alarm may not sound if the time for a schedule listing
arrives while you are transferring data or freeing up memory.
• Press C•CE to stop the alarm sound.
Turn the alarm sound on and off
After setting the alarm, you can turn off the alarm sound while keeping the
schedule alarm turned on.
1. Press MENU
2. Press
2
PREV
2
to select “2: ALARM SOUND”.
to select “2: OFF”.
<
ALARM SOUND
>
• A “ ” disappears, and the alarm
1: ON
2: OFF
sound is set to OFF.
• Press 1 (“1: ON”) in step 2 to set the
alarm sound to ON again, so that the
“ ” is displayed.
• Setting the alarm sound (“ ” mark status) does not affect the setting of
the schedule alarm (“ ” mark status) to each schedule listing.
• The schedule alarm set for the schedule listing will sound when the “ ”
is turned on and the time for each listing is reached. You cannot classify
or declassify each listing.
See also ...
Recalling the Listings ................ 16
Editing the Listings .................... 18
Deleting the Listings .................. 19
Checking the Memory Storage .. 16
Freeing Up Memory .................. 16
Entering Characters .................... 4
• Items marked with “
end of the list.
To Do Mode
To Do mode is selected by pressing TO DO/ANN once or twice.
Each time you press this key, the display switches between To Do and
Anniversary modes.
TO DO
DESCRIPTION ?
2. Enter the description. For example,
Call Frank about a sales meeting
3. Press ENTER .
4. Enter the priority. For example,
2
C•CE
Recalling the Listings ................ 16
Editing the Listings .................... 18
Deleting the Listings .................. 19
Checking the Memory Storage .. 16
Freeing Up Memory .................. 16
Entering Characters .................... 4
Memo Mode
Call Frank about a
PRIORITY ?
5. Press ENTER to store it in the
memory.
• Press
• You can also check off the item by recalling each listing and pressing
.
See also for To Do and Memo Mode
1.Storing the To Do Listings
1. Press TO DO/ANN once or twice to
display the To Do entry prompt.
” are given the lowest priority and listed at the
twice to cancel the entry.
The maximum number of characters for each memo is 512.
1.Storing the Memo Listings
1. Press MEMO to display the Memo
entry prompt.
MEMO
TITLE ?
• To begin another entry, press C•CE or simply begin entering the
description for the new listing.
• The priority can be set by any number 0-9 or letter A-Z or just left blank
by pressing ENTER . Lowercase letters entered without CAPS pressed
will be changed to the uppercase letters.
2. Enter the data. For example,
• Order of priority is from 0-9, A-Z, then space.
3. Press ENTER to store it in the
memory.
2.Checking off Completed Items
UNION BANK
272-0011223
South branch
UNION BANK
South branch
272–0011223 –
1. Press TO DO/ANN once or twice to display the To Do entry prompt.
2. Press MENU
3. Press
4. Press
and
2
to select “2: INDEX”.
to select the item.
to mark it as done.
13
2.Expense Summaries
Expense Mode
The Expense function is an easy-to-use method of tracking personal and
business expense information. The expense summaries allow you to see
the total expenses for a single day or for a certain period.
Expense summaries are a collection of records stored in Expense mode.
You can recall them for a specific day or a certain period.
(1) Summarizing an expense report for a specific day
<Example> Specify the date, April 5, 2001.
1.Creating the Expense Records
1. Press EXPENSE to enter the Expense mode.
<Example> The date is April 5, 2001.
You bought flight tickets for a business trip for $1,200.
2. Press MENU NEXT NEXT
select “2: EXPENSE REPORT”.
1. Press EXPENSE to display the date
entry prompt.
or
• The date can be changed by pressing either
04052001
>
3. Press 1 to select “1: DAILY”.
–DAILY–
DATE: 4/12/2001
• The current date will be displayed.
.
THU APR
AMOUNT ?
5,2001
4. Enter the desired date.
–DAILY–
DATE: 04/05/2001
04052001
THU APR 5,2001
1,200.00
DESCRIPTION ?
ENTER
• Numerical values can be input in up to
10 digits including 2 decimal places.
4. Enter the description.
Flight tickets for inspection abroad
5. Press ENTER to store it in the
memory.
THU APR
5,2001
1,200.00
Flight tickets for
inspection abroad –
• The description field can be skipped by pressing
5. Press ENTER .
• Press ENTER to return to the date
entry prompt, when you wish to check
another daily report.
ENTER
.
–DAILY–
DATE:APR
5,2001
1,200.00
(2) Summarizing a report for a certain period
<Example> From: April 1, 2001 To: April 30, 2001
1. Press EXPENSE to enter the Expense mode.
2. Press MENU
NEXT
NEXT
3. Press 2 to select “2: PERIOD”.
• Press C•CE once or twice to clear the description, and press it again to
return to the date entry prompt.
14
<
EXPENSE REPORT
1:DAILY
2:PERIOD
ENTER
3. Enter the expense amount and press
ENTER .
1200
to
EXPENSE
DATE ?
M/D/Y= 4/12/2001
• The month and the day must be entered
using 2 digits and the year using 4
digits. For single digit months or days, enter “0” before the single digit.
2. Enter the expense date and press
ENTER .
2
2
to select “2: EXPENSE REPORT”.
4. Enter the starting and ending time.
04012001
–PERIOD–
FROM:APR 1,2001
TO : 04/30/2001
ENTER
04302001
5. Press ENTER .
–PERIOD–
FROM:APR 1,2001
TO :APR 30,2001
• Press ENTER to return to the date
entry prompt.
• If the integer section in the calculation
result exceeds 12 digits, “∗, ∗∗∗, ∗∗∗, ∗∗∗. ∗∗” is displayed.
1,415.25
See also for Expense and Anniversary Mode
Recalling the Listings ................ 16
Editing the Listings .................... 18
Deleting the Listings .................. 19
Checking the Memory Storage .. 16
Freeing Up Memory .................. 16
Entering Characters .................... 4
2. Press 1 to select “1: MONTH/DAY”
to enter the date entry prompt.
3. Enter the date and press ENTER (or
).
0212
Anniversary mode is selected by pressing TO DO/ANN once or twice. Each
time you press this key, the display switches between To Do and
Anniversary modes.
In Anniversary mode, you can specify the month and date (such as
wedding anniversaries and birthdays), or month, week, and day of the week
(such as Mother’s Day (second Sunday in May)).
Once a date is stored as an anniversary, the date will be an anniversary for
every year from 1901 to 2099.
The maximum number of characters for each description is 512.
) in the center right of the date (See
1.Storing the Anniversary Listings
<Example 1> Enter the following data.
“Nancy’s Birthday” on February 12th.
M/D= – /
M=MONTH D=DAY
FEB 12
–ANN–
DESCRIPTION ?
ENTER
• If an attempt is made to store an invalid
date, you cannot move to the description entry prompt. Enter the correct
date and follow the next procedure.
4. Enter the description of the
anniversary.
Nancy’s Birthday
5. Press
Anniversary Mode
Anniversaries are marked with a tag (
page 11) in the monthly calendar.
1. Press TO DO/ANN once or twice to enter the Anniversary mode.
ENTER
FEB 12
–ANN–
Nancy's Birthday
to store it in the memory.
<Example 2> Register Mother's Day (second Sunday in May).
1. Press TO DO/ANN once or twice to enter the Anniversary mode.
2. Press
2
to select “2: MONTH/WEEK” to display the date entry mode.
3. Enter the month, week, and day of the
week.
05 2 0
4. Press ENTER , and then enter the
description of the anniversary.
ENTER
Mother's Day
M/W/D=05/2/0
M=MONTH W=WEEK
D=DAY 0:S 1:M 2:T
3:W 4:T 5:F 6:S
MAY WEEK 2 SUN
–ANN–
Mother's Day –
5. Press ENTER to store it in the
memory.
15
• The following situations may display the message shown below.
Checking the Memory Storage
1. Press MENU NEXT
MEMORY CHECK”.
1
to select “1:
The number of listings stored in TEL/
MAIL1, TEL/MAIL2, and URL (WWW)
files is displayed.
TEL/MAIL 1:76
TEL/MAIL 2:31
URL
:6
E
–––––– F
2. Press NEXT again to display the number of listings stored in
SCHEDULE, ANN1, and ANN2 files.
3. Press NEXT again to display the number of listings stored in MEMO,
EXPENSE, and TO DO files.
4. Press C•CE to return to the mode in which you were before pressing
MENU .
– When the power is turned on.
DO YOU WANT TO
FREE UP MEMORY ?
– When you performed the operation,
“Deleting the Listings” on page 19.
( Yes/No )
(It is recommended to press Y to
free up memory.)
• The indication “Replace the OPERATING batteries !” shown at the time of
freeing up memory means that the operating batteries are almost
exhausted. Replace them with new ones then try again to free up memory.
• The backlight function does not work while the memory is being freed up.
Recalling the Listings
• When the amount of memory used approaches F (FULL), delete
unnecessary data and free up memory to make enough space to store
new listings.
1.Notes for Recalling the Listings
• Since the same memory is used for all the modes other than the
Calculator and Conversion modes, the number of listings that can be
stored in each of these modes will vary depending on the situation of
each mode.
• The direct, keyword, and index searches are not case sensitive.
Freeing Up Memory
Deleting or modifying data during operation can produce unnecessary
space in the memory of the Organizer.
Delete unnecessary space and free up memory, when the Organizer
displays “MEMORY FULL”.
1. Press MENU
2. Press
3
NEXT
NEXT
.
to start freeing up memory.
• “WORKING...” is displayed indicating that the memory is being freed up.
16
• Perform searching the listings in each mode other than Clock, Calculator,
and Conversion modes.
• When the symbol “ ” or “ ” is displayed, more information exists.
Pressing
or
scrolls up or down one line.
• When there are no more (or relevant) listings to be recalled or to be
searched, “NOT FOUND !” is displayed briefly and the display returns to
the entry prompt.
2.Sequential Search
Recalls the listings in order in each mode.
To begin searching in Anniversary mode, press TO DO/ANN once or twice
to enter the Anniversary mode and then press 1 (or 2 ) to select the
searching type.
Press NEXT (or PREV ) to recall the listings in forward (or reverse)
order. Hold down either of these keys for rapid recall.
Schedule listings
• When nothing has been entered for that day, only the time entry prompt
is displayed.
• Press 2nd SCHEDULE in Schedule mode to recall the scheduled
listings for the current day. Then press NEXT repeatedly to check if any
other listings are scheduled for the current day.
• Press 2nd NEXT (or 2nd PREV ) in Schedule mode repeatedly to
recall the listings skipping empty dates. Press C•CE C•CE , then press
2nd NEXT (or 2nd PREV ) to display the first (or last) listing in
chronological order. After the last (or first) listing in chronological order
has been found, “NOT FOUND !” is displayed briefly.
3.Direct Search
3. Press
2nd
NEXT .
• Each time 2nd NEXT are pressed,
subsequent listings containing the
word “Sharp” will be displayed.
5.Index Search
Recall the listings in Telephone/E-mail, WWW, Schedule, To Do, Memo,
Expense, or Anniversary mode. The listings recalled are listed one for each
line on the display.
<Example> Display the Index in the Telephone/E-mail mode.
1. Press TEL to display the Telephone/
E-mail mode screen.
Recalls the listings by the first character(s) of the name (or the contents) in
Telephone/E-mail, WWW, Schedule, To Do, or Memo mode.
1. Enter the first character(s) of the desired name in each mode.
2. Press
2. Press
• The index of the Telephone/E-mail
listing is displayed.
NEXT
(or
PREV
).
• The search in Schedule mode begins from the currently displayed date in
forward (or reverse) order.
• If the desired listing in Telephone/E-mail or WWW mode is not found,
the subsequent listing in sequential order will be displayed.
• Each time NEXT (or
performed.
PREV
) is pressed, sequential search will be
4.Keyword Search
Recalls the listings by a word contained in the desired listing in Telephone/
E-mail, WWW, Schedule, To Do, or Memo mode.
<Example> Recall the listings containing the word “Sharp” in the TEL/
MAIL1 file.
Johns, Pat
201–265–5600
F
265–1234
Box G, Sharp Plaza,
Mahwah, New Jersey,
MENU
2
to select “2: INDEX”.
• Pressing ENTER returns to the screen
recalled in step 1.
Johns, Pat
201–265–5600
F
265–1234
Box G, Sharp Plaza,
Mahwah, New Jersey,
Johns, Pat
Robert, Smith
Shingo Nakahara
Stevenson Dug
Tom Robert
• Up to five listings are displayed at a time.
• To display the first listing beginning with a particular character in the
Telephone/E-mail, or WWW mode, press the desired character key. If
there is no listing for that character, the first subsequent listing will be
displayed.
• Pressing NEXT and PREV scrolls the page forward and backward.
To see the whole listings move the pointer “ ” using
and
to
select the desired listing, and press ENTER .
1. Press TEL to display the TEL/MAIL1 file.
Rearranging memos in the index display
In the index display, the order in which memos are recalled can be changed.
2. Enter the word.
1. Press
MEMO
MENU
2
to select “2: INDEX”.
Sharp
17
2. Press
to select the listing, and press INS .
and
7.Other Search in Calendar Mode
• The selected listing blinks.
4. Press ENTER to store the new order in the memory.
Recalling the scheduled item from the Calendar mode
The scheduled date is displayed with the tag ( ) on the right of the date
number. (See page 11)
• Press C•CE to cancel any changes.
1. Press
3. Press
and
to move the listing to the desired position.
SCHEDULE once or twice to display the Calendar mode.
• Pressing 2nd SCHEDULE displays the current date.
6.Date Search
Recalls the listings by the date in Calendar, Schedule, or Expense mode.
(1) Calendar or Schedule listings
<Example> Recall the calendar for December 25, 2001.
2. Press the cursor movement keys (
date with a tag.
3. Press
SCHEDULE
,
,
,
) to move to the
to display the schedule contents.
1. Press SCHEDULE .
2. Press C•CE to display the date entry
prompt.
3. Enter the month, day, and year.
MM/DD/YYYY
MONTH :04
DAY
:12
YEAR :2001
Editing the Listings
1.Editing the Listings
1. Recall a listing in the desired mode.
12252001
To make a correction, move the cursor with
C•CE to clear the displayed date.
or
, or press
2. Press
MENU
1
to select “1: EDIT”
• The edit mode is entered and the cursor flashes.
• To enter a single-digit month or day, enter zero and the digit.
3. Modify the data as desired.
4. Press
4. Press ENTER to store it in the memory.
ENTER
.
The specified calendar or schedule will be displayed.
2.Creating a New Listing
When you start this search in Calendar mode, pressing SCHEDULE
displays the desired date in Schedule mode. And when you start the
search in Schedule mode, pressing SCHEDULE displays the desired
date in Calendar mode.
Pressing 2nd ENTER instead in step 4 in the above section, “1. Editing
the Listings” creates a new listing without deleting the previously stored
listing. This operation is useful when you enter a new listing whose
contents are the same as or similar to the previously stored listing.
(2) Expense listings
Press C•CE in the Expense entry prompt, then enter the date and press
NEXT (or PREV ).
18
• When the Secret function is on, “SECRET ON MODE” is displayed and
the file cannot be deleted. In this case, turn the Secret function off (page
22) and repeat the above procedure.
Deleting the Listings
1.Deleting One Listing
4. Press
1. Recall the listing to be deleted.
2. Press DEL .
“DELETE ? Y/N” will appear.
3. Press
Y
to delete the currently displayed listing.
• To cancel the deletion operation, press
Y
.
• To cancel the deletion operation, press
N
.
• You can also delete individual listing on the index display.
Press MENU 2 in the desired mode to select “2: INDEX”, move the
pointer “ ” to select the listing you want to delete, and press DEL and
Y .
N
.
• All of the listings (including secret listings) in the selected mode will be
deleted all at once.
(2) Deleting all of the scheduled listings for an entire month
1. Press SCHEDULE once or twice to recall the calendar for the desired
month.
2. Press
DEL
. “DELETE ? Y/N” will appear.
3. Press Y to delete all of the schedule listings for the currently
displayed month.
2.Deleting All of the Listings in Each Mode
• To cancel the deletion operation, press
(1) Deleting all of the listings in each mode
If all of the listings for Telephone/E-mail, WWW (URL), Schedule, To Do,
Memo, Expense, or Anniversary mode are not necessary any more, you can
delete them all at once.
• Although all of the schedule listings for the month are deleted,
anniversaries are still retained.
<Example> Delete all listings in the TEL/MAIL1 files.
1. Press MENU
3 to select “3: DATA DELETION”.
2. Press 1 to select “1: TEL/MAIL/URL”.
3. Press 1 to select “1: TEL/MAIL1”.
“DELETE ? Y/N” is displayed.
• After performing step 1, press the following keys in other modes:
SCHEDULE: 2 1
ANN1: 2 2
ANN2: 2 3
MEMO: 3
EXPENSE: 4
TO DO (ALL): NEXT 1 1 .
TO DO (DONE): NEXT 1 2 .
N
.
(3) Deleting the password and secret listings
(Refer to page 22, “Secret Function” on registering the password and
turning the secret function on and off.)
The password and all secret listings can be deleted at the same time.
MENU
3
to select “3: DATA DELETION”.
2. Press NEXT
2
to select “2: SECRET DATA”.
1. Press
“ALL SECRET DATA DELETE ? Y/N” is displayed.
3. Press
Y
.
• To cancel the deletion operation, press
N
.
• “DELETED !” is displayed briefly and the password and all secret listings
are deleted.
19
Example
Calculator Mode
The Organizer’s built-in calculator can perform the 4 arithmetic calculations
in up to 12 digits.
Calculator mode is selected by
CALC
pressing CALC/CONV once or twice.
Each time you press this key, the display
switches between Calculator and
Conversion modes.
Before performing any calculation, press C•CE twice to clear the display.
0.
Operation
(–24+2) ÷ 4=
34 + 57 =
45 + 57 =
68 × 25 =
68 × 40 =
4 =
– 24 + 2
*
34 + 57 = The second figure (57)
= becomes the constant.
45
(Subtraction and division are
performed in the same way as above.)
68
What is 10% of 200? 200
What percentage is 9
of 36?
9
25 =
40 =
The first figure (68)
becomes the constant.
10 %
36 %
(4 ) =
4
=
1/8
8
=
25 × 5 =
–) 84 ÷ 3 =
+) 68 + 17 =
CM 25
5
84
3 M–
68 + 17 M+
3 2
–5.5
91.
102.
*
2,720.
20.
25.
200 + (200 × 10 %) = 200 + 10 %
220.
500 – (500 × 20 %) = 500 – 20 %
400.
0.125
123456789098
-M-M-M-M-
M+
145 =
C•CE
125.
28.
85.
182.
–E–
17.9012344192
17.9012344192
(17.9012344192 × 1012 = 17901234419200)
<Example> 5 × (–10) = –50
10 +/–
=
Conversion Mode
Each time you press CALC/CONV , the display switches between
Calculator and Conversion modes.
This mode has 2 types of conversions as shown below.
The number on the top right of the conversion display indicates the
selected conversion type.
CONVERSION
$
£
1
0.
0.
20
4.
4,096.
=
– (minus) can only be used when entering a negative number as the
first number. Use +/– for following negative numbers during
calculation.
5
1,700.
=
RM
123456789098 ×
145 =
17901234419210
Display
Display
25 – 9 =
(Total) =
• An error occurs when the integer section of the calculation result
exceeds 12 digits, if the memory exceeds 12 digits, or a number is
divided by zero. (“-E-” is displayed.)
Press C•CE to cancel the error.
Example
Operation
CDDD
25 – 9 =
← Conversion number
No.
Conversion pattern
Unit A
Unit B
1
$
→
2
$
→
3
$
→
No.
3.Changing the Currency or Unit
Conversion pattern
l
If there is no conversion pattern you want to use, you can change the
currency or unit in the conversion patterns No. 1 to No. 3.
→
l
1. Repeat steps 1 to 3 of the above section, “Setting the Rate”.
→
ml
Unit A
Unit B
→
£
10
gal
11
I.gal
¥
12
fl.oz
13
I.fl.oz
→
ml
2. Press
,
and
to move the cursor to the currency to be
changed and enter the new currency or unit.
• Up to 7 letters can be entered each for unit A and unit B.
4
inch
→
cm
14
oz
→
g
5
feet
→
m
15
lb
→
kg
6
yard
→
m
16
°F
→
°C
7
mile
→
km
17
cal
→
J
acre
→
m2
18
hp
→
4.Converting Currency/Unit
8
W
9
acre
→
ha
19
PS
→
W
To convert unit A to unit B, press
To convert unit B to unit A, press
3. Press
to move the cursor to the rate field and enter the rate.
.
.
<Example 1> Convert $198 to £.
1.Changing the Conversion Display
1. Press NEXT (or PREV ) to select the unit. (In this example, select the
conversion number 1: $1 = £0.6.)
1. Press CALC/CONV once or twice to select the Conversion mode.
2. Press NEXT and PREV until the desired conversion number is
displayed.
2. Enter the value to be converted.
CONVERSION
$
£
198
2.Setting the Rate
198.
<Example> Set the following rate: $1 = £0.6
1. Press CALC/CONV once or twice to select the Conversion mode.
3. Press
to convert it.
The conversion result is displayed.
2. Press NEXT (or PREV ) to select the conversion number 1.
3. Press
MENU
1
• Once you have set each rate, you can
perform a consecutive conversion
such as from £ to $, and then from $ to
to select “1: EDIT”.
• The result display disappears and the rate display flashes.
4. Enter the rate. (Up to 10 digits)
0.6 ENTER
1
0.6
CONVERSION
$
£
1
0.6
0.
CONVERSION
$
£
1
0.6
118.8
.
• The previous conversion result remains on the display, when you switch
from one conversion type to another. Press C•CE to clean the result
and start another conversion.
21
<Example 2> Convert 25°C to °F.
3. Press ENTER .
1. Press NEXT (or PREV ) to select the unit. (In this example, select the
conversion number 16, which does not display the rate.)
2. Enter the value to be converted.
25
3. Press
CONVERSION
F
C
16
2. Turning the Secret Function On and Off
˚
77.
• The conversion result may have a slight calculation error as a result of
rounding off the number. Use the conversion result for reference.
Secret Function
1. Registering a Password
Up to 7 characters can be registered for the password.
If you forget the password, it will be necessary to clear the password
and all secret listings from the memory (see page 19). As a safeguard,
make a written record of the password.
NEXT
3
to select “3: SECRET”.
• If “ALLOW ACCESS TO SECRET DATA”
is displayed instead, a password is
already registered.
To delete and change the password,
refer to page 23.
2. Enter the password. For example,
1234567
22
When the Secret function is on, an “ S ” is displayed. When the Secret
function is off, the “ S ” is cleared even after the password is registered.
(1) Turning the Secret function off
1. Press MENU NEXT 3 to select “3:
SECRET”.
2. Enter the password and press
The Secret function allows you to protect confidential listings with a password,
so that no unauthorized person can recall them.
MENU
PASSWORD
[ 1234567 ]
IS NOW SET
4. Press C•CE to display the entry prompt.
to convert it.
˚
1. Press
S
“PASSWORD [1234567] IS NOW SET”
and an “ S ” are displayed.
The “ S ” indicates the Secret function
is in effect.
SET PASSWORD
[
]
–
ENTER
S
.
ALLOW ACCESS TO
SECRET DATA
[
]
–
(Enter “1234567” in this case.)
“SECRET DATA ACCESSIBLE !” is displayed briefly. The Secret function
is now off and secret listings can be recalled. The display changes into
the entry prompt without the “ S ”.
• If the incorrect password is entered, “INCORRECT PASSWORD !” will be
displayed briefly and the display changes into the entry prompt.
• Even after the Secret function is turned off, the Secret function will
automatically be turned on after manual or auto power off.
(2) Turning the Secret function on
1. Press MENU NEXT 3 to select “3:
SECRET”.
2. Press 1 to select “1: HIDE SECRET”.
1:HIDE SECRET
2:DELETE THE
PASSWORD
“SECRET DATA IS HIDDEN !” is
displayed briefly. The secret function is now on and secret listings
cannot be recalled. The display changes into the entry prompt with the
“ S ”.
3. Designating the Listings as Secret
Only one password can be registered, but many secret listings can be entered.
A “ ” next to a listing indicates it is secret. Secret listings cannot be
recalled unless the Secret function is off.
(1) Storing a listing as secret
1. Press MENU NEXT 4 during the data entry to select “4: SECRET
MARK( )”.
2. Press 1 to select “1: ON”.
(4) Recalling (and editing) the secret listings
Perform recalling (or editing) the secret listings in each mode.
To recall (and edit) the secret listings, the Secret function must first be
turned off.
(5) Recalling only the secret listings
1. Turn the Secret function off. (Refer to page 22.)
2. Press the desired mode key to display the entry prompt in which you
want to recall the listing.
to display the "
The “ ” is displayed.
3. Press ENTER to store it in the memory.
3. Press
MENU
4. Press
2nd
(2) Designating a stored listing as secret
<Example> Designate the listing for “ABC BANK” as secret.
The secret listings only are sequentially recalled.
1. Recall the listing.
S
2. Press MENU
1
ABC BANK
Chicago Branch
Account No.
272–0011333
to select “1: EDIT”.
NEXT
3. Press
to select “4: SECRET MARK ( )”.
4. Press 1 to select “1: ON”.
ABC BANK
S Chicago Branch
The “ ” is displayed.
4
MENU
5. Press ENTER .
The listing for “ABC BANK” is now
designated as secret.
Account No.
EDIT 272–0011333
(3) Changing a secret listing to non-secret
1. Turn the Secret function off. (Refer to page 22.)
1
to select “1: EDIT”.
4 to select “4: SECRET MARK (
5. Press 2 to select “2: OFF”.
The “ ” disappears.
NEXT
6. Press ENTER .
The secret listing is now changed to non-secret.
(or
4
2nd
1
".
PREV ).
• If no secret listing is found, “NOT FOUND !” is displayed briefly and the
display returns to the entry prompt.
(6) Deleting and changing the password
1. Turn the Secret function off. (Refer to page 22.)
2. Press MENU NEXT 3 to select “3: SECRET”.
3. Press 2 to select “2 : DELETE THE
1:HIDE SECRET
2:DELETE THE
PASSWORD”.
PASSWORD
4. Enter the old password to be deleted
and press ENTER .
“PASSWORD IS DELETED !” is displayed briefly and the display changes
into the entry prompt.
5. To register a new password, follow the procedure described in “1.
Registering a Password” on page 22.
If you forget the password
If you forget the password, you have to delete it by deleting all the secret
data.
2. Recall the desired secret listing.
3. Press MENU
4. Press MENU
NEXT
NEXT
)”.
Make sure that you really want to delete them, and see page 19, “(3)
Deleting the password and secret listings”.
23
Transferring the Data
This Organizer can transfer data to/from the following SHARP Organizer by
using the optional communication cable. (CE-260L)
Organizers on the other end: YO-190/180/480
EL-6890/6790
Exchange data:
each listing, all listings in each mode, entire
data stored in the Organizer (for a backup
and restoration process between the same
models)
• When “MEMORY FULL” is displayed and data transfer is aborted, delete
unnecessary data on the receiving Organizer.
• The indication “WORKING...” shown on the side of the receiving
Organizer at the beginning or end of the data transfer means that the
memory has begun to be freed up automatically.
2.Transferring the Data between Organizers
• Turn both of the Organizers off first before connecting them with the cable.
/ANN
DULE
S
X
Z
2nd
OF
ON
C
CM
R
E
W
Q
CAPS
ht
• After data transfer, the data on the transferring Organizer is preserved.
TO DO
MENU
K
LIN
A
F
D
TER
MPU
CO
K
LIN
• Turn off the secret function before transferring data by mode (p. 22).
Q
DULE
R
E
W
SCHE
CM
MENU
TER
MPU
CO
1.Cautions and Special Notes for Data Transfer
ON
/ANN
TO DO
SCHE
F
OF
A
D
S
X
Z
2nd
C
CAPS
ht
Lig
Back
Lig
Back
• The alarm setting is ignored. The alarm will not sound during data
transfer.
• The Auto power off function is disabled in all the transfer modes.
• The Backlight is nullified during data transfer. (If the Backlight is on, it is
automatically turned off at the beginning of data transfer.)
• When the Organizers are not in the same mode before transferring data
by listing or mode, “DATA ERROR !” is displayed and no data transfer is
allowed.
However, directories in the Telephone (or E-mail) and WWW modes are
excluded from this rule. For example, data in the TEL/MAIL1 directory
can be transferred to the WWW directory.
• When the communication cable is disconnected during data transfer,
“I/O DEVICE ERROR !” is displayed. Press C•CE to clear the error,
check that the Organizers are connected correctly, and then start the
steps again.
• The indication “Replace the OPERATING batteries !” shown whenever
any item is selected on the “UNIT TO UNIT” menu screen means that the
operating batteries are almost exhausted. Replace them with new ones
then try again to transfer data.
24
• When an error occurs, “I/O DEVICE ERROR !” is displayed on the
receiving or transferring Organizer, or on both ones.
1. Press the desired mode key, or recall a listing to be transferred on the
transferring Organizer.
• To transfer all the listings in each mode, press the mode key to display
the entry prompt. To transfer each listing, recall the desired listing.
2. Press MENU NEXT NEXT
on both the Organizers.
NEXT
The following menus are displayed.
<
>
UNIT TO UNIT
1:SEND
4:BACKUP
2:RECEIVE 5:RESTORE
3:VERIFY
3. Press 2 on the receiving Organizer to
select “2: RECEIVE”.
<
UNIT TO UNIT
>
RECEIVING
MODE
4. Press 1 on the transferring Organizer
to select “1: SEND”.
Data transfer is started.
• To interrupt data transfer, press
ON
.
Messages are displayed on the respective Organizers while data is being
transferred.
Transferring Organizer
<
UNIT TO UNIT
>
–SENDING–
Receiving Organizer
<
UNIT TO UNIT
>
When these messages are no longer displayed, the data transfer is
completed.
<
UNIT TO UNIT
<
UNIT TO UNIT
BACKUP
RECEIVING
MODE
>
3. Press 4 on the transferring Organizer
to select “4: BACKUP”.
A confirmation message is displayed.
<
UNIT TO UNIT
BACKUP
SEND
OK ? Y/N
>
4. Press Y in answer to the
confirmation message on the
transferring Organizer.
<
UNIT TO UNIT
>
–SENDING–
<
–RECEIVING–
To verify the listing after it has been
transferred, press 3 (“3: VERIFY”) on
the receiving Organizer in step 3.
2. Press 5 on the receiving Organizer to
select “5: RESTORE”.
>
UNIT TO UNIT
Backup data transfer is started.
–RECEIVING–
Messages are displayed on the
respective Organizers while the data is
being transferred. When these
messages are no longer displayed, the backup data transfer is
completed.
>
Make sure you really want to delete all the data in the receiving Organizer
before executing the "RESTORE" function. Once you start the restoration
process, all the data in the receiving Organizer will be deleted, even if
you cancel the restoration process.
–VERIFYING–
If any discrepancies are found, “VERIFY ERROR !” is displayed.
3.Transferring Data to Make a Backup File
All data in the Organizer can be transferred to the same model of the
Organizer.
1. Press
MENU
NEXT
NEXT
NEXT
on both the Organizers.
25
Exchanging Data with a PC
With SHARP PC Interface software and cable package, you can exchange
data with an IBM compatible personal computer.
/ANN
What Does PC Interface Software Do?
DULE
ON
Backup ................ Backs up all data in the Organizer to your PC.
Restore ................ Restores data from a backup file into an Organizer.
Address Utility ..... Allows you to type in an address, E-mail or WWW entry
on a PC and download it into your Organizer.
System Requirements
• Windows® 2000 Professional, Windows® 98, Windows® 95
• 8MB free hard disk space
• VGA monitor or better
• Microsoft® Mouse or compatible Pointing Device
• 3.5” disk drive
• One available serial port with D-sub 9-pin connector
And for Windows® 2000 Professional:
• 133MHz or higher Pentium-compatible CPU
• 64MB RAM available
And for Windows® 98, Windows® 95:
• IBM-compatible 486 or Pentium-compatible CPU (66MHz or higher)
• 24MB RAM available
1.Before You Begin
(1) Connecting Your Organizer to a PC
1. Turn off your PC and the Organizer.
2. Connect the standard 9-pin connector of the PC interface cable into a
COM port on your PC.
• Using a 25-pin connector instead of the standard 9-pin connector
requires an additional adaptor.
3. Connect the other end of the PC Interface Cable into the PC interface
connector located on the left side of the Organizer.
26
TO DO
SCHE
F
OF
R
E
W
K
LIN
A
TER
MPU
CO
PC Interface Cable
(supplied)
CM
MENU
Q
S
Z
D
X
2nd
C
CAPS
Light
Back
(2) Installing
1. Insert the PC Interface Software disk into your disk drive.
2. Click on the Windows [Start] button and then click [Run].
3. Type in a:\Setup.exe and click on [OK].
• Type in your disk drive name ("a:" in this example).
4. Follow the on-screen instructions.
The software is installed into the following location and can be accessed
in the following directory:
C:\Program Files\Sharp YOZQ_b\
Application: [Start] ➝ [Program] ➝ [Sharp YOZQ_b] ➝[EO-Utility]
ReadMe: [Start] ➝ [Program] ➝ [Sharp YOZQ_b] ➝[ReadMe]
You are recommended not to change the default folder name: [Sharp
YOZQ_b].
5. Click [Finish].
2.Getting Started
Known Incompatibilities
• While you are backing up or restoring data, a transfer error may occur
with certain 3D screen saver utility programs enabled. Before
transferring data, disable any 3D screen saver utility programs you may
be running.
• PC Interface Software may not run reliably with certain virus scanning
programs enabled. If you have problems in transferring data with your
Organizer, disable any virus checking software you may be running.
• PC Interface Software may not run reliably with certain power
management features enabled. If you have problems in transferring data
with your Organizer, disable any power management features you may
have turned on.
(1) PC Interface Software Main Screen
All operations can be accessed from
the Main Screen.
To access the Main Screen, click
[Start] ➝ [Program] ➝ [Sharp
YOZQ_b] ➝ [EO-Utility].
(2) Setting the COM port
1. Connect your Organizer to a PC.
2. Click [Start] ➝ [Program] ➝ [Sharp YOZQ_b] ➝ [EO-Utility].
• When you are using a notebook PC, an error message may be displayed
when you click [Auto Detect...]. Check the BIOS setting on your
notebook PC and set it to the serial port. Even when the BIOS setting is
correctly made, you may need to select an appropriate port manually.
3.Backup and Restore
(1) Making a Backup File
1. Connect your Organizer to a PC.
2. Click [Start] ➝ [Program] ➝ [Sharp YOZQ_b] ➝ [EO-Utility].
The PC Interface Software Main Screen appears.
3. Click [Backup].
The dialog box appears asking you
to enter the backup file name, if
necessary.
• The default name is determined
according to the PC clock
system, in the format of
"YYYYMMDD.BKE", for example,
20010101.BKE.
• [Browse...] allows you to change the backup file, its file name and its
destination.
• When the COM port has not been selected, the warning message dialog
box appears. Click [OK]. Then click [COM port...] on the Main Screen
and select the appropriate port.
The PC Interface Software Main Screen appears.
3. Click [COM port...].
The COM port setting dialog box
appears.
• Click the radio button to select an
appropriate port or click [Auto
Detect...] to allow an appropriate
port to be selected automatically.
4. Click [NEXT >>] to start the backup process.
The instructions screen appears.
• To cancel the backup process, click [Abort] on the instructions screen.
5. On your Organizer:
Press MENU NEXT NEXT NEXT and 4 to select “4: BACKUP”.
Then press Y to start the backup process.
27
(2) Restoring a Backup File
"Restore" function replaces all the data in the Organizer with the backup file
saved on a PC.
• Make sure you really want to delete all the data in your Organizer before
executing the "Restore" function. Once you start the restoration process,
all the data in the Organizer will be deleted, even if you cancel the
restoration process.
1. Connect your Organizer to a PC.
2. Click [Start] ➝ [Program] ➝ [Sharp YOZQ_b] ➝ [EO-Utility].
4.Address Utility
Click [Address Utility] on the Main Screen to open the Address Utility window.
(1) Command Buttons
Send button
Transfers the data to
your Organizer.
Entry fields of TEL/E-mail mode
Mode tabs
Switch the mode window
between TEL/E-mail mode and
WWW mode.
New button
Clears the input data
in all entry fields to
create new data.
The PC Interface Software Main Screen appears.
3. Click [Restore].
The dialog box appears asking you to choose the backup file name.
4. Click [NEXT >>] to start the restoration process.
The confirmation dialog box appears.
• To cancel the restoration process, click [NO].
5. Click [YES].
The instructions screen appears.
• To cancel the restoration process, click [Abort] on the instructions
screen.
6. On your Organizer:
Press MENU NEXT
NEXT
The data transfer is started.
NEXT
and 5 to select “5: RESTORE”.
Secret button
Sets this data as secret.
Click on this area.
: Secret ON
28
Done button
Closes the dialog window.
: Secret OFF
Entry fields of WWW mode
6. Enter the information.
• The cursor appears in the
entry field you click for
input.
(2) Entering an Address
<Example> Enter the following data as secret data in TEL/E-mail mode.
Name
Number
Address
E-mail
Edwards Bob
201-265-5600
F 265-1234
Supervisor Sales dept.
ABCD co. 15 North St.
edwards@abcd.efg.com
1. Connect your Organizer to a PC.
2. Click [Start] ➝ [Program] ➝ [Sharp YOZQ_b] ➝ [EO-Utility].
The PC Interface Software Main Screen appears.
3. Click [Address Utility].
4. Click [TEL/E-mail] tab.
7. (After entering the information), click [Send].
The instructions screen appears.
• To cancel the transferring process, click [Abort] on the instructions screen.
8. On your Organizer:
Press MENU NEXT
NEXT
NEXT
If the transferred data is displayed on
the display of the Organizer, the
transferring process is completed.
and
2
to select “2: RECEIVE”.
Edwards Bob
201–265–5600
F
265–1234
Supervisor Sales de
pt. ABCD co. 15 Nor
• Do not forget to fill in the Name field before clicking [Send]. Otherwise,
the data you typed in can not be sent.
• You can not enter the characters or symbols not supported by the
Organizer in the entry fields.
5. Click [New] to clear the input data in all entry fields.
29
(2) Replacing the batteries
Battery Replacement
Batteries used
Type
Lithium battery
Lithium battery
Model
CR2032
CR2032
Quantity
2
1
Use
Unit operation
Memory backup
• Do not remove both the operating and memory backup batteries at
the same time. Doing so will clear the memory of its contents.
• Be sure to write down any important information stored in the
memory before replacing the batteries.
1. Precautions
Since improper use of the batteries may cause leakage or explosion, strictly
observe the following instructions.
•
•
•
•
Insert the battery with its positive side (+) correctly positioned.
Never throw batteries into a fire because they might explode.
Keep batteries out of the reach of children.
When batteries become low, remove them from the Organizer
immediately to avoid battery leakage and corrosion inside the Organizer.
• Make sure the power is turned off before replacing the batteries.
• Do not press ON until the battery replacement procedure is
completed.
1. Press OFF to turn the power off.
2. Loosen the screw (counterclockwise) and remove the
battery holder cover on the back of the unit.
3. Remove the used batteries using a ball-point pen or
similar object.
• Do not use a mechanical pencil or sharp pointed
object.
4. Install 2 new batteries with the positive sides (+) facing up.
5. Replace the holder cover and secure it with the screw.
Because the batteries in the Organizer were installed at the factory, they
may become depleted before the specified expiration time is reached.
6. The power will be turned on 2 to 3 seconds after ON is pressed. If the
power does not come on, press the RESET switch.
2. Operating Batteries Replacement
7. Set the clock to the correct time.
(1) Battery replacement time
When “ BATT ” is displayed, immediately replace the batteries with new
ones. If the battery level is very low, the alarms or the key touch tone may
not sound, or similarly the Backlight may remain on for less than the set
interval or it may not function. Continued use of the Organizer with low
batteries can alter or clear the memory contents. Memory contents may be
lost if the batteries are improperly replaced or if the following instructions
are disregarded.
3.Memory Backup Battery Replacement
30
(1) Battery replacement frequency
• Replace the battery every 5 years.
When you start to use the Organizer, write down the date on the label of the
Organizer, so that you know when to replace the battery the next time.
For example:
MEMORY BACKUP BATTERY
INSTALLATION DATE
MONTH
• YEAR
11 2001
(2) Precautions when replacing the memory backup battery
If the memory backup battery is replaced when the operating batteries are
depleted, the memory contents will be lost. Make sure the operating
batteries are not depleted. If the operating batteries are depleted, first
replace these before replacing the memory backup battery.
(3) Replacing the battery
1. Press OFF to turn the power off.
2. Loosen the screw (counterclockwise) and remove the
battery holder cover on the back of the unit.
3. Remove the memory backup battery seal.
4. Remove the used battery using a ball-point pen or
similar object.
Shortcuts
This Organizer has 9 shortcut keys to provide rapid access to the menus.
Shortcut
Action
See page...
2nd
A
Turns the Schedule alarm on and off.
12
2nd
E
Enters the edit mode.
18
2nd
I
Displays the Index.
17
2nd
O
Displays the options for the data
transfer.
2nd
S
Sets or deletes the password.
2nd
M
Sets the “
2nd
EXPENSE *
Displays the Expense report.
14
2nd
Turns the alarm sound on and off.
12
2nd
Turns the key sound on and off.
2
” mark.
24
22~23
23
* For use in Expense mode only
• Do not use a mechanical pencil or sharp pointed object.
5. Install a new battery with the positive side (+) facing up.
6. Replace the seal and the holder cover and secure the cover with the
screw.
7. The power will be turned on 2 to 3 seconds after ON is pressed. If the
power does not come on, press the RESET switch. If nothing appears on
the display again, replace the operating batteries.
31
Specifications
Model:
Product name:
Display:
Memory capacity:
Clock mode:
Accuracy:
Display:
YO-190
Electronic Organizer
19 columns × 5 lines
260736 bytes
±30 seconds/month (at 25°C/77°F)
Year, month, day, day of the week, hour, minute,
AM/PM, city name, time zone
Clock system:
12-hour/24-hour format (switchable) World clock
function, daylight saving time/summer time display
function, schedule alarm function
Telephone/E-Mail mode: Entry and recall of names, numbers, postal
addresses, and E-mail addresses
WWW mode: Entry and recall of names, URL, and remarks
Calendar mode: From Jan., 1901 to Dec., 2099, Schedule mark function
distinguishing between morning, afternoon, and anniversary.
Schedule mode: Entry and recall of schedule (year, month, day, hour and
minute), schedule alarm
To Do mode: Entry and recall of To Do listings
Memo mode: Entry and recall of memo listings
Expense mode: Entry and recall of expense listings
Anniversary mode: Entry and recall of month, day (or month, week, day),
and description of anniversaries
Calculator mode: 12 digits (with calculation status symbol) Addition,
subtraction, multiplication, division, percentage, square root, memory
calculation, etc.
Currency/Unit conversion mode: 10 digits, 19 kinds of currencies and units
32
Power consumption: 0.1W
Operating temperature: 0°C – 40°C (32°F – 104°F)
Power supply: Operating battery: 6V ... (DC)
(Lithium battery CR2032×2)
Memory backup battery: 3V ... (DC)
(Lithium battery CR2032×1)
Battery life:
Operating batteries (at 25°C/77°F)
• Approx. 1200 hours
When data is continuously displayed without Backlight.
• Approx. 300 hours
When data is continuously displayed with Backlight for 2 minutes
per hourly use.
• Approx. 270 hours
When data is searched for 5 minutes and displayed for 55 minutes
per hourly use and Backlight is on for 2 minutes per hourly use.
• Approx. 1.5 years
When turned off and the clock is running.
Memory backup battery
• Approx. 5 years (if operating batteries are replaced promptly when
exhausted)
• Approx. 1 year (if operating batteries are exhausted)
Weight: Approx. 130 g ( 0.29 lb.) (Including batteries)
Dimensions: Open: 148 mm (W) × 180 mm (D) × 9 mm (H)
5-13/16" (W) × 7-3/32" (D) × 11/32" (H)
Closed: 148 mm (W) × 92 mm (D) × 13 mm (H)
5-13/16" (W) × 3-5/8" (D) × 1/2" (H)
Accessories: 3 lithium batteries (installed), operation manual
ESPAÑOL
Instrucciones abreviadas en español
ÍNDICE
Empleo del Organizador por primera vez .......................................... S-1
Función de desactivado automático ................................................. S-1
Luz de fondo .................................................................................... S-1
Ajuste del contraste de LCD ............................................................. S-2
Activación y desactivación del sonido de pulsación de teclas ........... S-2
Liberación de la memoria ................................................................. S-2
Empleo de los relojes LOCAL y MUNDIAL .............................................. S-2
Almacenamiento de los listines de TELÉFONO/CORREO ELECTRÓNICO ...... S-2
Almacenamiento de los listines de WWW (URL) .................................... S-3
Pantalla del CALENDARIO mensual ........................................................ S-3
Almacenamiento de los listines del PROGRAMA DE ACTIVIDADES ....... S-3
Almacenamiento de los listines de TO DO .............................................. S-3
Almacenamiento de los listines de NOTAS ............................................. S-4
Creación de los registros de GASTOS .................................................... S-4
Almacenamiento de los listines de ANIVERSARIOS ............................... S-4
Llamada de los listines ........................................................................... S-4
Llamada del ítem programado en el modo de calendario ....................... S-5
Edición de los listines ............................................................................. S-5
Borrado de un listín. ............................................................................... S-5
Borrado de todos los listines en cada modo ........................................... S-5
Ajuste del tipo de cambio (CONVERSIÓN) .............................................. S-6
Conversión de monedas/unidades .......................................................... S-6
Cambio de las pilas ................................................................................ S-6
Empleo del Organizador por primera vez
1. Pulse el interruptor RESET mientras mantiene pulsado
interruptor RESET y luego suelte ON .
ON
. Suelte el
Aparece “CLEAR ALL DATA OK (Y/N)?”.
• Bajo ciertas condiciones, podría aparecer el mensaje “Data has been
impaired! Press [Y] to CLEAR ALL memory”.
2. Pulse
Y
.
3. El Organizador se ha inicializado.
Función de desactivado automático
Para ahorrar energía de las pilas, el Organizador se desactivará
automáticamente si no se pulsa ninguna tecla durante aproximadamente 7
minutos. (El tiempo real puede variar según las condiciones de utilización).
Pulse ON para reanudar la operación.
Luz de fondo
Pulsando BackLight una vez, se iluminará la pantalla y la luz de fondo
permanecerá iluminada mientras esté utilizando el Organizador o hasta que
no se active ninguna tecla durante el período definido por usted.
Ajuste de la luz de fondo
1. Pulse MENU PREV PREV 4 para seleccionar “4: BACKLIGHT
SETUP” (4: Ajuste de luz de fondo).
TURN OFF AFTER:
2. Pulse 1 , 2 , 3 o 4 para
1: 15 SECONDS
seleccionar el lapso (15 – 60
2: 30 SECONDS
segundos).
3: 45 SECONDS
4: 60 SECONDS
• Volverá a aparecer el modo en que se
encontraba antes de pulsar MENU .
S-1
Ajuste del contraste de LCD
Empleo de los relojes LOCAL y MUNDIAL
1. Pulse MENU NEXT 2 para seleccionar “2: LCD CONTRAST” (2:
Contraste de LCD).
2. Pulse
o
para hacer la pantalla
< LCD CONTRAST
más oscura o más clara.
–DARK
• El grado de contraste cambia
–LIGHT
continuamente mientras se mantiene
pulsado
o .
3. Pulse C•CE para ajustar el contraste.
1. Pulse CLOCK una o dos veces para que se visualice el reloj local.
2. Pulse MENU PREV PREV 1 para seleccionar “1: CLOCK SETTING”
(1: Ajuste del reloj).
3. Pulse 1 para seleccionar “1: HOME
HOME
[ 18.0 ]
NEW YORK
CLOCK” (1: Reloj local).
SAT JAN 1,2000
4. Introduzca la hora y los minutos.
(10:05 PM, porejemplo)
AM
1005 PM .
5. Introduzca el mes, el día y el año. (12 de abril de 2001, por ejemplo.)
04122001
6. Pulse ENTER .
7. Pulse MENU PREV PREV 1 para seleccionar “1: CLOCK SETTING”.
8. Pulse 2 para seleccionar “2: WORLD CLOCK” (2: Reloj mundial).
9. Pulse NEXT o PREV hasta que aparezca la ciudad correspondiente al
huso horario deseado.
10.Pulse ENTER .
>
Activación y desactivación del sonido de pulsación de teclas
1. Pulse MENU PREV 1 para seleccionar “1: KEY SOUND” (1: Sonido
de teclas).
2. Pulse 1 para activar el sonido de las teclas, o 2 para desactivarlo.
• Volverá a aparecer el modo en que se encontraba antes de pulsar
MENU .
Liberación de la memoria
Al conectar la alimentación, aparecerá el mensaje siguiente, preguntándole
si desea desocupar la memoria borrando datos innecesarios.
Pulse Y para borrar. La liberación de la
DO YOU WANT TO
memoria requiere un máximo de
FREE UP MEMORY ?
aproximadamente 2 minutos.
N
Pulse
cuando desee comenzar la
( Yes/No )
operación inmediatamente.
12:00
Almacenamiento de los listines de TELÉFONO/CORREO
ELECTRÓNICO
Podrá acceder a los listines de teléfono/correo electrónico pulsando TEL o
E-MAIL . Ambas teclas visualizan los mismos listines almacenados en el
orden respectivo en la pantalla.
Asimismo, los listines de teléfono/correo electrónico proporcionan 2
archivos (TEL/MAIL1, TEL/MAIL2). Los archivos se desplazan cada vez que
pulsa TEL o E-MAIL .
1. Pulse TEL para visualizar el indicador
TEL/MAIL 1
NAME ?
de entrada de TEL/MAIL1.
(
S-2
TEL MODE )
2. Introduzca el nombre, números de
Johns, Pat
teléfono y de fax, dirección, dirección
201–265–5600
F
265–1234
de correo electrónico.
Box G, Sharp Plaza,
Johns, Pat ENTER
Mahwah, New Jersey,
201-265-5600
F 265-1234 ENTER
Box G, Sharp Plaza, Mahwah, New Jersey,
07430-2135, U.S.A. ENTER
johns-P@sharpsec.com ENTER
Almacenamiento de los listines del PROGRAMA DE
ACTIVIDADES
Introduzca un listin de programa para el 24 de junio de 2001 (June 24,
2001).
1. Pulse SCHEDULE una o dos veces para visualizar la pantalla del modo
de programa de actividades.
2. Pulse C•CE para visualizar el indicador
MM/DD/YYYY
MONTH :04
de entrada de fecha.
DAY
YEAR
:12
:2001
Almacenamiento de los listines de WWW (URL)
1. Pulse WWW para visualizar el indicador de entrada de URL.
2. Introduzca el nombre, WWW (URL),
SHARP ELECTRONICS C
ORP.
observación.
http://www.sharp–us
SHARP ELECTRONICS CORP. ENTER
a.com
New Jersey
sharp-usa. com ENTER
New Jersey ENTER
Pantalla del CALENDARIO mensual
NEXT
: para visualizar el mes siguiente o anterior.
: para mover el cursor o desplazar el calendario una semana
hacia arriba o hacia abajo.
PREV
1. Pulse SCHEDULE una o dos veces
Año
para visualizar el modo de calendario.
Mes
” indica que la última semana del
• “
01
1
mes está oculta abajo. Para visualizar
9 2 3 4 5 6 7 8
9
10
11
12
13
14
15
la última semana, pulse
hasta que
16 17 18 19 20 21 22
el cursor se desplace a la siguiente
23 24 25 26 27 28 29
pantalla.
2. Pulse NEXT (o PREV ) para visualizar el calendario del mes siguiente
(o anterior).
3. Introduzca la fecha, la hora de inicio y
SUN JUN 24,2001
11:30AM~ 1:00PM
la hora de fin, los detalles del
Lunch
with Tom
programa.
ENTER
06242001
1130 AM 01 PM
Lunch with Tom ENTER
4. Ahora, pulse SCHEDULE para
01
1 2
6 3 4 5 6 7 8 9
comprobar que el listin ha quedado
10
11
12
13
14
15
16
almacenado en la memoria.
17 18 19 20 21 22 23
24 25 26 27 28 29 30
• Observe la etiqueta ( ) a la derecha
de “24”. Indica un item programado
para esa fecha.
Ítems de programa que comienzan a la mañana o ítems de
programa sin una hora especificada
Ítems de aniversario
Ítems de programa que comienzan a la tarde
Almacenamiento de los listines de TO DO
1. Pulse TO DO/ANN una o dos veces
Call Frank about a
para que se visualice el indicador de
PRIORITY ?
entrada de To Do.
2. Introduzca la descripción.
Call Frank about a sales meeting ENTER .
S-3
3. Introduzca la prioridad.
2 ENTER .
• La prioridad puede ajustarse a cualquier número de 0 a 9 o letra de A a
Z, o puede dejarse en blanco pulsando ENTER . El orden de prioridad es
de 0 a 9, A a Z, seguido de espacio.
Verificación de los ítems realizados
1. Pulse MENU 2 para seleccionar “2: INDEX”.
2. Pulse
para seleccionar el ítem.
para marcarlo como ítem realizado.
3. Pulse
• A los ítems marcados “ ” se asigna la prioridad más baja y se
clasifican al final de la lista.
Almacenamiento de los listines de NOTAS
1. Pulse MEMO para que se visualice el indicador de entrada de notas.
2. Introduzca los datos.
UNION BANK
South branch
UNION BANK
South branch
272–0011223 –
272-0011223 ENTER
Creación de los registros de GASTOS
1. Pulse EXPENSE para visualizar el
indicador de entrada de fecha.
2. Introduzca la fecha para el gasto.
04052001
ENTER
3. Introduzca el importe de los gastos.
1200
EXPENSE
DATE ?
M/D/Y= 4/12/2001
ENTER
THU APR
AMOUNT ?
5,2001
Almacenamiento de los listines de ANIVERSARIOS
En el modo de aniversario, podrá especificar el mes y el día (como los
aniversarios de bodas y cumpleaños), o el mes, la semana y el día de la
semana (como el Día de la Madre (segundo domingo de mayo)).
Mes/Día
1. Pulse TO DO/ANN una o dos veces para entrar al modo de aniversario.
2. Pulse 1 para seleccionar “1: MONTH/
DAY” (1: Mes/Día) y visualizar el
indicador de entrada de fecha.
3. Introduzca la fecha y la descripción.
0212 ENTER
Nancy’s Birthday ENTER
M/D= – /
M=MONTH D=DAY
FEB 12
–ANN–
Nancy's Birthday
Mes/Semana
1. Pulse TO DO/ANN una o dos veces para entrar en el modo de
Aniversario.
2. Pulse 2 para seleccionar “2: MONTH/WEEK” (2: Mes/Semana) para
visualizar el modo de entrada de fecha.
3. Introduzca el mes, semana y día de la
M/W/D=05/2/0
M=MONTH W=WEEK
semana.
D=DAY 0:S 1:M 2:T
05 2 0 ENTER
3:W 4:T 5:F 6:S
4. Introduzca la descripción del
aniversario.
Mother's Day ENTER
MAY WEEK 2 SUN
–ANN–
Mother's Day –
Llamada de los listines
4. Introduzca la descripción.
Flight tickets for inspection abroad
ENTER
S-4
THU APR
5,2001
1,200.00
Flight tickets for
inspection abroad –
Búsqueda secuencial
Permite llamar los listines en el orden de cada modo.
Pulse NEXT (o PREV ) para llamar los listines en orden progresivo (o
regresivo). Mantenga pulsada una u otra tecla para una llamada rápida.
• En el modo de programa de actividades, pulse 2nd NEXT (o 2nd
PREV ) repetidas veces para llamar los listines saltando las fechas
vacantes. Pulse C•CE , C•CE , luego pulse 2nd NEXT (o 2nd PREV )
para visualizar el primer (o último) listín en orden cronológico.
• Cuando no hayan más listines (existentes o pertinentes) que se puedan
llamar o buscar, aparecerá “NOT FOUND!” (¡No encontrado!) por unos
instantes y volverá a visualizarse el indicador de entrada.
Búsqueda directa
1. Introduzca el primer carácter(es) del nombre deseado en cada modo.
2. Pulse NEXT (o PREV ).
• La búsqueda en el modo de programa de actividades comienza a partir
de la fecha visualizada actualmente, en orden progresivo (o regresivo).
Búsqueda por palabra clave
1. Seleccione el modo deseado. (Por ejemplo, pulse TEL )
2. Introduzca la palabra.
Sharp
3. Pulse 2nd NEXT .
Johns, Pat
201–265–5600
• Cada vez que pulsa 2nd NEXT , se
F
265–1234
visualizarán los listines subsiguientes
Box G, Sharp Plaza,
Mahwah, New Jersey,
que contengan la palabra “Sharp”.
Búsqueda por índice
Los listines llamados se visualizan en la pantalla, uno por cada línea.
1. Seleccione el modo deseado. Por ejemplo, pulse TEL para visualizar la
pantalla del modo de teléfono/correo electrónico.
2. Pulse MENU 2 para visualizar “2:
Johns, Pat
Robert, Smith
INDEX”.
Shingo Nakahara
3. Pulsando NEXT y PREV la página se
Stevenson Dug
Tom Robert
desplaza hacia adelante y atrás. Para
ver los listines completos, mueva el
puntero “ ” usando
y
para seleccionar el listín deseado, y pulse
ENTER .
Llamada del ítem programado en el modo de calendario
La fecha programada aparecerá con una etiqueta ( ) a la derecha del
número de fecha.
1. Pulse SCHEDULE una o dos veces para visualizar el modo de calendario.
• Pulsando 2nd SCHEDULE se visualiza la fecha actual.
2. Pulse las teclas de desplazamiento del cursor ( , , , ) para
desplazarse a la fecha con una etiqueta.
3. Pulse SCHEDULE para visualizar el contenido del programa.
Edición de los listines
1.
2.
•
3.
4.
Llame un listín en el modo deseado.
Pulse MENU 1 para seleccionar “1: EDIT” (1: Editar).
Se accede al modo de edición y el cursor destella.
Modifique los datos según se desee.
Pulse ENTER para almacenarlo en la memoria.
Borrado de un listín
1. Llame el listín que desea borrar.
2. Pulse DEL .
Aparecerá “DELETE ? Y/N” (¿Borrar? Sí/No).
3. Pulse
Y
para borrar el listín actualmente visualizado.
• Para cancelar la operación de borrado, pulse
N
.
Borrado de todos los listines en cada modo
1. Pulse MENU 3 para seleccionar “3: DATA DELETION” (3: Borrado de
datos).
2. Pulse la tecla del número de modo para borrar todos los listines. (Para
seleccionar “TO DO” o “SECRET DATA”, pulse NEXT .)
3. Aparecerá “DELETE ? Y/N” (¿Borrar? Sí/No).
Pulse Y .
• Para cancelar la operación de borrado, pulse N .
S-5
Ajuste del tipo de cambio (CONVERSIÓN)
Cambio de las pilas
1. Pulse CALC/CONV una o dos veces para seleccionar el modo de
conversión.
2. Pulse NEXT (o PREV ) para seleccionar el número de conversión 1.
3. Pulse MENU 1 para seleccionar “1: EDIT” (1: Editar).
• La pantalla del resultado se borra y el tipo de cambio destella.
4. Introduzca el tipo de cambio. Por
CONVERSION
1
$
£
ejemplo,
0.6
0.6 ENTER
0.
Conversión de monedas/unidades
Para convertir la unidad A en la unidad B, pulse .
Para convertir la unidad B en la unidad A, pulse .
1. Pulse NEXT (o PREV ) para seleccionar la unidad. (Por ejemplo,
seleccione el número de la pantalla de conversión 1: $1 = £0.6).
2. Introduzca el valor que desea convertir.
CONVERSION
$
£
198
1
0.6
198.
3. Pulse
para convertirlo.
CONVERSION
$
£
Aparecerá el resultado de la conversión.
• El resultado de la conversión anterior
permanece en la pantalla al cambiar de
un tipo de conversión a otro. Pulse
C•CE para borrar el resultado y realizar otra conversión.
S-6
1
0.6
118.8
Pilas utilizadas
Tipo
Pila de litio
Pila de litio
Modelo
CR2032
CR2032
Cantidad
2
1
Uso
Funcionamiento de la unidad
Respaldo de la memoria
• No extraiga simultáneamente las pilas de funcionamiento y de
respaldo de la memoria, pues podrá perder los datos de la memoria.
• Antes de cambiar las pilas, asegúrese de anotar toda la información
importante almacenada en la memoria.
Precauciones
Como el uso inapropiado de las pilas puede producir fugas o explosión,
observe al pie de la letra las siguientes instrucciones.
• Inserte la pila con su lado positivo (+) correctamente posicionado.
• Nunca arroje las pilas al fuego pues podrán explotar.
• Mantenga las pilas fuera del alcance de los niños.
• Cuando se debiliten las pilas, sáquelas inmediatamente del Organizador
para evitar el riesgo de derrames y corrosión en el interior del Organizador.
Debido a que las pilas entregadas con el Organizador han sido instaladas en
fábrica, podrían agotarse antes del tiempo de vida útil especificado.
Cambio de las pilas de funcionamiento
(1) Intervalo de cambio de las pila
Cuando aparezca “ BATT ”, cambie inmediatamente las pilas por otras
nuevas. Cuando las pilas están muy descargadas, podría suceder que las
alarmas o el tono de pulsación de teclas no suenen, o que la luz de fondo
no se encienda durante el período establecido o no se encienda para nada.
Si continúa usando el Organizador con las pilas descargadas se podrán
alterar o borrar los contenidos de la memoria. También se podrán perder
los contenidos de la memoria debido a una instalación incorrecta de las
pilas o por la negligencia en la observación de las siguientes instrucciones.
(2) Cambio de las pilas
• Asegúrese de apagar la unidad antes de cambiar las pilas.
• No pulse ON antes de finalizar el procedimiento de cambio de las
pilas.
1. Pulse OFF para desconectar la alimentación.
2. Afloje el tornillo (en sentido antihorario) y saque la
tapa del compartimiento de las pilas en el respaldo de
la unidad.
(3) Cambio de la pila
1. Pulse OFF para desconectar la alimentación.
2. Afloje el tornillo (en sentido antihorario) y saque la
tapa del compartimiento de las pilas del respaldo de
la unidad.
3. Extraiga las pilas usadas con un bolígrafo o similar.
• No emplee un lápiz mecánico ni un objeto
puntiagudo.
3. Extraiga el sello de la pila de respaldo de la memoria.
4. Instale las 2 pilas nuevas con el lado positivo (+)
dirigido hacia arriba.
5. Reinstale la tapa del compartimiento de las pilas y asegúrela con el
tornillo.
6. La alimentación se conectará 2 a 3 segundos después de pulsar ON . Si
la alimentación no se conecta, pulse el interruptor RESET.
7. Ajuste el reloj a la hora correcta.
Cambio de la pila de respaldo de la memoria
(1) Intervalo de cambio de la pila de respaldo de la memoria
• Cambie la pila cada 5 años.
Cuando empiece a usar el Organizador, anote la fecha en la etiqueta del
Organizador para poder saber cuándo debe cambiar la pila.
Por ejemplo:
MEMORY BACKUP BATTERY MONTH
INSTALLATION DATE
• YEAR
(2) Precauciones al cambiar la pila de respaldo de la memoria
Si cambia la pila de respaldo de la memoria con las pilas de funcionamiento
agotadas, se perderán todos los datos de la memoria. Asegúrese de que las
pilas de funcionamiento no estén descargadas. Si las pilas de
funcionamiento están descargadas, primero cambie estas pilas antes de
cambiar la pila de respaldo de la memoria.
11 2001
4. Extraiga la pila usada con un bolígrafo o similar.
• No emplee un lápiz mecánico ni un objeto puntiagudo.
5. Instale la pila nueva con su lado positivo (+) dirigido
hacia arriba.
6. Vuelva a poner el sello en su lugar y la tapa del compartimiento, y
asegure con el tornillo.
7. La alimentación se conectará 2 a 3 segundos después de pulsar ON . Si
la alimentación no se conecta, pulse el interruptor RESET. Si todavía no
se visualiza nada, cambie las pilas de funcionamiento.
(Fecha de instalación de la pila de respaldo de la memoria)
S-7
Declaration of Conformity
Electronic Organizer : YO-190
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
WARNING – FCC Regulations state that any unauthorized changes or
modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Note: A shielded interface cable is required to ensure compliance with
FCC regulations for Class B certification.
PRODUCT SUPPORT
If you have read the ORGANIZER operation manual, but you still require
product support, you can:
Call a Sharp Customer Assistance Center
630-378-3590
(7am to 7pm CST M–F)
Visit our Web Site
http://www.sharp-usa.com
Send an E-mail
pdasupport@sharpsec.com
Write to our Customer Assistance Center
Sharp Electronics Corp.
Customer Assistance Center
Att: WIZARD HELP
1300 Naperville Drive
Romeoville, IL 60446
LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer
purchaser that this Sharp brand product (the “Product”), when shipped
in its original container, will be free from defective workmanship and
materials, and agrees that it will, at its option, either repair the defect or
replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s)
set forth below.
be liable, or in any way responsible, for any damages or defects in the
Product which were caused by repairs or attempted repairs performed
by anyone other than an authorized servicer. Nor shall Sharp be liable or
in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental
or consequential damages, so the above exclusion may not apply to you.
This warranty does not apply to any appearance items of the Product nor
to the additional excluded item(s) set forth below nor to any Product the
exterior of which has been damaged or defaced, which has been subjected
to improper voltage or other misuse, abnormal service or handling, or
which has been altered or modified in design or construction.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
In order to enforce the rights under this limited warranty, the purchaser
should follow the steps set forth below and provide proof of purchase to
the servicer.
The limited warranty described herein is in addition to whatever implied
warranties may be granted to purchasers by law. ALL IMPLIED
WARRANTIES
INCLUDING
THE
WARRANTIES
OF
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE
PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized
to make any warranties other than those described herein, or to extend
the duration of any warranties beyond the time period described herein
on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties
granted by Sharp and shall be the sole and exclusive remedy available
to the purchaser. Correction of defects, in the manner and for the period
of time described herein, shall constitute complete fulfillment of all liabilities
and responsibilities of Sharp to the purchaser with respect to the Product,
and shall constitute full satisfaction of all claims, whether based on
contract, negligence, strict liability or otherwise. In no event shall Sharp
Your Product :
Electronic Organizer
Warranty Period for this
Product :
One (1) year parts and labor from date
of purchase.
Additional Items Excluded
from Warranty Coverage :
Any consumable items such as paper,
maintenance cartridge, ink cartridges
supplied with the Product or to any
equipment or any hardware, software,
firmware, fluorescent lamp, power cords,
covers, rubber parts, or peripherals other
than the Product.
Where to Obtain Service :
At a Sharp Authorized Servicer located
in the United States. To find out the
location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BESHARP.
What to do to Obtain Service : Ship (prepaid) or carry in your Product to
a Sharp Authorized Servicer. Be sure to
have proof of purchase available. If you
ship or mail the Product, be sure it is
packaged carefully.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
PRINTED IN CHINA/IMPRESO EN CHINA
00CTO (TINSE0395EHZZ)