- No category
advertisement
W e strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However , if you h av e any p rob l e m s wi t h your ne w p r od u c t,
D O NO T RETURN I T T O THE S T O R E
, please contact us toll free @:
1 - 8 6 6 - 5 5 6 - 2 7 59
F AX: 1-866-873-3531 f oo s b al l @escala d es p o rt s . com
O r writ e t o :
E s c al a d e S p o r t s
C u s t o m e r S er v i c e De p a r t m e n t
P . O. Box 8 8 9
Ev a ns v ill e IN 4 7 7 06
Please have your model number when inquiring about parts.
Wh e n c on t ac t ing Es c al a d e S po r t s pl e as e p r o v i d e y ou r m o d e l n um b er , date code (if a p plic a ble) , a n d pa r t n u mb e r if r e q u e sting a r e pl a ce me nt p a r t. Th es e nu m be r s ar e lo c at e d o n th e p rod u c t , p a c k a gi n g , a n d in t his o wn e r s ma nu a l.
Your Model Mumber
Date Code
Purchase Date
_______________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
All Rights Reserved
© 201 0 Escalade Sports 1 For Customer Service Call 1-866-556-2759
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
TWO ADU L TS ARE REQUIRED T O ASSEMBL E
THIS REMATCH SOCCER TABLE
T oo l s Requ i r e d :
Allen W rench T1 and Wrench T2 Included with the Hardware Kit
Phillips Screwdriver
Furniture Polish and Cloth
An electric screwdriver is helpful in assembl y . Howeve r , please set at low torque and use extreme caution with an electric screwdriver because you could overtighten the hardware and strip the screws.
Assembly T ips
Make
Table.
sure you understand the following tips before you begin to assemble your Rematch Soccer
1 . Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please read and understand the text before starting each assembly step.
REA D AN D FOLLO W AL L ASSEM B L Y , OPE R A TION , A N D
SAFET Y INSTRUCTION S CAREFU L L Y . A T LEAS T T W O
ADULTS ARE NEEDED TO PUT THIS REMATCH
SOCCER TABLE TOGETHER.
All Rights Reserved
© 201 0 Escalade Sports 2 For Customer Service Call 1-866-556-2759
HARDWARE IDENTIFIER
(To Scale)
H1 - 6mm x 38mm
Allen Head Bolt (8)
H2 - 6mm x 15mm
Flat W asher (14)
H3 - 4mm x 38mm
Phillips Flat Head
Screw (4)
H4 - 8mm x 28mm
Allen Head Bolt (16)
H5 - 8mm x 19mm
Flat Washer (16)
H6 - 3mm x 25mm
Phillips Washer Head
Screw (8)
H7 - 3.5mm x 15mm
Phillips Round Head
Screw (6)
H8 - 4mm x 12mm
Phillips Round Head
Screw (48)
H9 - 4mm x 32mm
Phillips Flat Head
Screw (16)
H10 - 3.5mm x 30mm
Phillips Washer Head
Screw (4)
H11 - 3.5mm x 28mm
Phillips Washer Head
Screw (24)
H12- 6mm
Lock Nut (6)
(Not to Scale)
T1 - Allen Wrench
(Not to Scale)
T2 - Wrench
ACCESSORIES IDENTIFIER
(Not to Scale)
All Rights Reserved
© 2010 Escalade Sports
A1- Soccer Ball (2)
3 For Customer Service Call 1-866-556-2759
PARTS IDENTIFIER
(Not to Scale)
P1-Side Apron (2) P2-End Top Rail (2) P3-Goal End Board (2)
P4-End Apron (2) P5-Playfield (1) P6-Leg (4)
P7-Leg Panel (4)
P8-Leg Bottom
Board (4)
P9-Wooden Ball
Catcher (2)
P10-Playfield
Support Brace (3) P11-Rod Handle (8) P12-Plastic Corner
Post (4)
P13A-Black Scorer (1)
P13B-Silver Scorer (1)
P14-Plastic Bracket (8) P15-Rod End Cap (8)
P16-Ball Entry Cup (2)
All Rights Reserved
© 2010 Escalade Sports
P17-Support Rod (3)
4 For Customer Service Call 1-886-556-2759
R1-2 Player Rod
Assembly Silver (1)
R4-2 Player Rod
Assembly Black (1)
R2-3 Player Rod
Assembly Silver (2)
R5-3 Player Rod
Assembly Black (2)
R3-5 Player Rod
Assembly Silver (1)
All Rights Reserved
© 2010 Escalade Sports
R6-5 Player Rod
Assembly Black (1)
5 For Customer Service Call 1-866-556-2759
PARTS REQUIRED:
2 pcs - P2 End Top Rail 4 pcs - P14 Plastic Bracket
2 pcs - P3 Goal End Board 16 pcs - H8 Phillips Round Head Screw
1. Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the box top to protect the parts during assembly.
2.
Place two Plastic Brackets P14 onto each inside end of Goal End Board P3 as shown and attach using the pre-drilled pilot holes with Phillips Round Head Screws H8 as shown in
FIGURE 1A.
Next, attach this assembly to the End Top Rail P2 using pre-drilled pilot holes with Phillips
Round Head Screws H8 as shown in FIGURE 1B. Repeat procedure for second assembly.
P3 H8
Black laminate this side
H8
H8 P3
P14
H8 Figure 1A
P2
P14
Silver laminate on bottom side
Figure 1B
Round corner this position
PARTS REQUIRED:
2 pcs - P4 End Apron
4 pcs - P14 Plastic Bracket
8 pcs - H8 Phillips Round Head Screw
3. Attach Plastic Brackets P14 to End Apron P4 using the pre-drilled pilot holes with Phillips
Round Head Screws H8 as shown in FIGURE 2. Be sure bottom edge of Plastic Brackets is flush with bottom edge of apron. Repeat procedure for second assembly.
Figure 2
P4
All Rights Reserved
© 2010 Escalade Sports
H8
P14
6 For Customer Service Call 1-866-556-2759
CAUTION:
Please set the rods as shown noting the location of the hole / handle end.
PARTS REQUIRED:
1 pc - P1 Side Apron
1 pc - R1 2 Player Rod Assembly Silver
2 pcs - R2 3 Player Rod Assembly Silver
1 pc - R3 5 Player Rod Assembly Silver
1 pc - R4 2 Player Rod Assembly Black
2 pcs - R5 3 Player Rod Assembly Black
1 pc - R6 5 Player Rod Assembly Black
4. Place one Side Apron P1
UPSIDE DOWN with the finished side facing out
as shown in FIGURE 3. The ball entry hole will be closest to the floor.
5. Align the rods as shown in FIGURE 3. Please note the location of the hole that is near one end of each rod. This is the handle end of the rod. There will be four handles on each side of the table. It is critical that you set the rods as shown below so the table will be correct when flipped over.
P1
C8 Rod Bushing
C9 Rod Bumper
C10 Rod Washer
Hole / Handle End
Figure 3
R2
R1
R5
R5
R3
R6
R2
R4
Hole / Handle Goes
On The Other End of
These Rods
All Rights Reserved
© 2010 Escalade Sports 7 For Customer Service Call 1-866-556-2759
PARTS REQUIRED:
1 pcs - P1 Side Apron
1 pcs - P5 Playfield
6. Once you are sure you have the rods set up correctly, slide the other Side
Apron P1 onto the rods as shown in FIGURE 4.
7. Set the Playfield P5 in the side aprons as shown in FIGURE 4.
P1 P5
P1
B o tt o m
Figure 4
All Rights Reserved
© 2010 Escalade Sports 8 For Customer Service Call 1-866-556-2759
PARTS REQUIRED:
8 pcs - H1 Allen Hex Bolt
8 pcs - H2 Flat Washer
8 pcs - H6 Phillips Washer Head Screw
1 pc - T1 Allen Wrench
8. Place P2/P3 assemblies that were put together in STEP 2 into position as shown in FIGURE 5.
Attach each corner using Allen Hex Bolts H1 with Flat Washer H2 into steel inserts as shown in FIGURE 5. Tighten Bolts with Allen Wrench T1.
Next, Attach Playfield to this assembly using Phillips Washer Head Screw H6 as shown in FIGURE 5. Be careful not to strip these screws.
P1
P5
H2
H1
H6
H2
H1
P1
H6
P2
P3
Figure 5
All Rights Reserved
© 2010 Escalade Sports 9 For Customer Service Call 1-866-556-2759
PARTS REQUIRED:
4 pcs - P12 Plastic Corner Post
24 pcs - H8 Phillips Round Head Screw
9. First, slide Corner Posts P12 onto End Apron P4 as shown in FIGURE 6A. Make sure
Corner Posts are flush with top and bottom of End Apron.
Next, attach Corner Post P12 using pre-drilled pilot holes with Phillips Round Head
Screws H8 as shown in FIGURE 6B.
P12
Note:
Make sure each corner post is flush with each apron.
H8
P4
P4
P12
Figure 6A
Figure 6B
H8
10. Next, slide assemblies into place as shown in FIGURE 7. Attach Corner Posts to Side
Aprons P1 using Phillips Round Head Screws H8 as shown in DETAIL A.
Next, using Phillips Round Head Screws H8, attach each plastic bracket on End Apron P4 as shown in DETAIL B.
P1
DETAIL A
P4
H8 P5
P1
P4
H8
P5 P1
DETAIL B
All Rights Reserved
© 2010 Escalade Sports
Figure 7
10 For Customer Service Call 1-866-556-2759
PARTS REQUIRED:
2 pcs - P9 Wooden Ball Catcher
4 pcs - H10 Phillips Washer Head Screw
11. Install Wooden Ball Catcher P9 at the end of each End Apron P4 using Phillips Washer
Head Screws H10 as shown in FIGURE 8 .
P9
P4
Figur e 8
H10
P4
P9
3 pcs - P17 Support Rod
PARTS REQUIRED:
3 pcs - P10 Playfield Support Brace 6 pcs - H2 Flat Washer
6 pcs - H12 Locknut
1 pc - T2 Wrench
12. Place Playfield Support Braces P10 onto bottom side of playfield. Slide Support Rods P17 into braces as shown and attach each end of rods using Flat Washers H2 and Locknut
H12 as shown in FIGURE 9 . Do not overtighten this hardware.
H12
H2
H2
H2
P10
P10
P17
P10
P17
H2
P17
H2
Figur e 9
H2
H12
All Rights Reserved
© 2010 Escalade Sports 11 For Customer Service Call 1-866-556-2759
4 pcs - P6 Leg
4 pcs - P7 Leg Panel
4 pcs - P8 Leg Bottom Board
PARTS REQUIRED:
16 pcs - H9 Phillips Flat Head Screw
24 pcs - H11 Phillips Washer Head Screw
13. Carefully unfold and attach Leg Panels P7 to Legs P6 using pre-drilled holes with Phillips
Washer Head Screws H11 as shown in FIGURE 10.
Next, Attach Leg Bottom Boards P8 to Leg assembly using Phillips Flat Head Screws H9 as shown in FIGURE 10. Repeat procedure for other 3 Legs.
H9
Figure 10 P8
P6
H11
P7
H11
PARTS REQUIRED:
16 pcs - H4 Allen Head Bolt 1 pc - T1 Allen Wrench
16 pcs - H5 Flat Washer
14. Attach each Leg assembly to cabinet assembly using Allen Head Bolts H4 with Flat
Washers H5 as shown in FIGURE 11. Use Allen Wrench T1 to tighten Bolts.
H5
H4
Figure 11
All Rights Reserved
© 2010 Escalade Sports 12 For Customer Service Call 1-866-556-2759
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY AND
THE RODS WILL SLIDE. DO NOT LIFT THE TABLE BY
HOLDING ONTO THE RODS.
1 pc -
PARTS REQUIRED:
8 pcs P11 Rod Handle
1 pc P13A Black Scorer
P13B Silver Scorer
2 pcs - P16 Ball Entry Cup
4 pcs - H3 Phillips Flat
Head Screw
6 pcs - H7 Phillips Round
8 pcs - P15 Rod End Cap Head Screw
15. Attach Scorers P13A and P13B using Screws H3 as shown in FIGURE 12.
16. Slide Rod Handle P11 onto each rod end with the hole closest to the end of
each rod. A drop of liquid soap onto hole end of rod will help with rod handle
installation.
17. Attach each Rod End Cap P15 to each rod as shown in FIGURE 12.
18. Attach each Ball Entry Cup P16 to each side panel with Screw H7 as shown in
DETAIL C.
H3
P15
P11
Hole P13A-Black Scorer
Detail C
P16
P13B-Silver
Scorer
Figure 12
H7
All Rights Reserved
© 2010 Escalade Sports 13 For Customer Service Call 1-866-556-2759
Congratulations! Y ou have now assembled your soccer table. Please note the Car e and Use instructions below to insure many years of trouble free use of your gam e tabl e .
CARE AND USE OF YOUR REMATCH SOCCER TABLE
1 . Apply spray furniture polish to a clean cloth and wipe down the rod s to make them slide easier in the bushings .
2 . Use spray f urni t ure polish t o clean all ex t erior sur f aces o f your game t able .
3 . T his produc t is in t ended f or I N D O O R use onl y .
4 . D O N O T s i t, c li m b o r lean on t he t able .
5 . D O N O T drag the table when moving it. This will damage the leg s.
6 . D O N O T set drinks on the table.
All Rights Reserved
© 2010 Escalade Sports 14 For Customer Service Call 1-866-556-2759
P a r t # D e s c ri p t i o n Q t y
01341XDH1 6 mm x 38 mm
Allen Hex Bolt
01341XDH2 6 mm x 15mm
Flat Washer
01341XDH3 4 mm x 38 mm Phillips
Flat Head Screw
01341XDH4 8 mm x 28 mm
8
14
4
Allen Head Bolt
01341XDH5 8 mm x 19mm
Flat Washer
01341XDH6 3 mm x 25 mm Phillips
16
16
Washer Head Screw 8
01341XDH7 3.5 mm x 15 mm Phillips
6 Round Head Screw
01341XDH8 4 mm x 12 mm Phillips
Round Head Screw
01341XDH9 4 mm x 32 mm Phillips
Flat Head Screw
01341XDH10 3.5 mm x 30 mm Phillips
Washer Head Screw
01341XDH11 3.5 mm x 28 mm Phillips
48
16
4
Washer Head Screw 24
01341XDH12 6 mm Locknut
01341XDT1 Allen Wrench
01341XDT2 Wrench
6
1
01341XDP1 Side Apron
01341XDP2 End Top Rail
01341XDP3 Goal End Board
01341XDP4 End Apron
01341XDP5 Playfield
01341XDP6 Leg
01341XDP7 Leg Panel
01341XDP8 Leg Bottom Board 4
01341XDP9 Wooden Ball Catcher 2
01341XDP10 Playfield Support Brace 3
4
4
2
1
2
2
1
2
PRODU C T P A R T S L I S T G 0 1 3 4 1W
P a r t # D es c ri p t i o n
01341XDP11 Rod Handle
01341XDP12 Plastic Corner Post
01341XDP13A Black Scorer
01341XDP13B Silver Scorer
01341XDP14 Plastic Bracket
01341XDP15 Rod End Cap
01341XDP16 Ball Entry Cup
01341XDP17 Support Rod
01341XDA1 Soccer Ball
01341XDR1 2 Player Rod
Assembly Silver
01341XDR2 3 Player Rod
Assembly Silver
01341XDR3 5 Player Rod
Assembly Silver
01341XDR4 2 Player Rod
Assembly Black
01341XDR5 3 Player Rod
Assembly Black
01341XDR6 5 Player Rod
Assembly Black
01341XDC1 5 Player Rod Only
01341XDC2 3 Player Rod Only
01341XDC3 2 Player Rod Only
01341XDC4 4mm x 28mm Bolt
01341XDC5 4mm Locking Nut
01341XDC6 Silver Player
01341XDC7 Black Player
01341XDC8 Rod Bushing
01341XDC9 Rod Bumper
01341XDC10 Rod Washer
01341XDK1 Hardware Kit
01341XDM1 Owners Manual
2
26
26
13
13
4
2
1
2
16
16
16
1
1
1
1
Q t y
2
3
8
8
2
1
1
8
4
1
2
PLEAS E R E T AI N THI S MANUA L FO R FUTUR E REFERENC E .
All Rights Reserved
© 2010 Escalade Sports 15 For Customer Service Call 1-866-556-2759
TABLE SOCCER
Table soccer is also called “foosball.” It can be played by two teams of four players each or by two individuals:
The Object of the Game
To be the first team (or player) to score a predetermined number of points or to score the most points in given amount of time.
Serving
The server rolls the ball through the serving hole to start the game, after a point is scored, or after a ball leaves the table. The server can spin the ball to influence the serve, but the ball must be struck by one of the serving team’s (or server’s) player figures. Once the ball is in play, it remains in play until it is hit off the table, a dead ball is declared, time out is called, or a point is scored.
Passing
If a ball is pinned on the 5-man rod, it cannot be passed to the 3-man rod of the same team without touching at least two player figures as it is being passed.
Scoring
When a ball enters the opposing team’s goal, a point is scored. If the ball enters the goal, but bounces back onto the playing surface or leaves the table, it still counts as a goal.
Spinning Rods
Spinning the rods is illegal.
Ball Off the Table
If the ball leaves the playing surface and strikes any object that is not part of the table, it is declared “off the table” and should be put back into play by a serve from the team (or player) that originally served that ball. If the ball rolls into the serving cup and then returns to the playing surface, it is still considered “in play.”
Dead Ball
If a ball has completely stopped its motion and cannot be reached by any player figure, it is declared a “dead ball.” If the ball is declared dead between the goal and the 2-man rod, it should be put back into play by placing it in nearest corner and releasing it. If the ball is declared dead anywhere else on the playing surface, it should be put back into play by a serve from the team that originally served the ball. If a ball is spinning in place, it is not considered a dead ball.
All Rights Reserved
© 2010 Escalade Sports 16 For Customer Service Call 1-866-556-2759
90 DAY LIMITED WARRANTY
This consumer warranty extends to the original consumer purchase of any ESCALADE
SPORTS Product (hereinafter referred as the "Product").
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of 90 days from the original purchase.
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser that any Product of its manufacture is free from defects in material and workmanship when used for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE
PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,
IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PROD-
UCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMAN-
SHIP.
WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADE
SPORTS shall repair or replace with a comparable model, and Product, or component thereof, which may prove defective under normal use and proper care, and which our examination shall disclose to our satisfaction to be thus please contact our Warranty Dept.
1-866-556-2759 / Warranty Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Warranty Dept.
Or E-mail us at: [email protected]
Other than shipping requirements no charge will be made for such repair or replacement of inwarranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for value prior to mailing.
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF
THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIM-
ITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS
SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER
CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES IN-
CURRED BY THE CONSUMER OF ANY OTHER USE.
Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
All Rights Reserved
© 2010 Escalade Sports 17 For Customer Service Call 1-866-556-2759
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project