Sharp LC-62C42U Service manual

TopPage
LC-42D62U/LC-62C42U
SERVICE MANUAL
No. S86V9LC42D62U
LCD COLOR TELEVISION
MODELS
LC-42D62U
LC-62C42U
In the interests of user-safety (Required by safety regulations in some countries) the set should
be restored to its original condition and only parts identical to those specified should be used.
OUTLINE
This model is based on the LC-46D62U and is changed some parts. This Service Manual covers the modifications
alone. For the other points, refer to the LC-46/52D62U Service Manual.
CONTENTS
DIFFERENCES FROM BASE MODEL
LIST OF CHANGED PARTS ...............................i
Parts Guide
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRECAUTION ...........................................................ii
PRECAUTIONS A PRENDRE LORS DE
LA REPARATION .............................................. iii
PRECAUTIONS FOR USING LEAD-FREE
SOLDER ...........................................................iv
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS ......................................... 1-1
CHAPTER 2. OPERATION MANUAL
[1] OPERATION MANUAL .................................. 2-1
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS ................................................ 3-1
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS ................... 4-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LC-42D62U/LC-62C42U
LC-42D62U/LC-62C42U
DIFFERENCES FROM BASE MODEL
Service Manual
LIST OF CHANGED PARTS
Ref. No.
PWB ASSEMBLIES
MAIN Unit
Description
LC-46D62U
DUNTKD934FM01
TERMINAL Unit
DUNTKD935FM01
R/C, LED Unit
KEY Unit
POWER SUPPLY Unit
DUNTKD909FM02
DUNTKD910FM02
RDENCA184WJQZ
LC-42D62U/LC-62C42U
DUNTKD934FM03 (LC-42D62U)
DUNTKD934FM04 (LC-62C42U)
DUNTKD935FM03 (LC-42D62U)
DUNTKD935FM04 (LC-62C42U)
←
←
RDENCA192WJQZ
Note
Some parts changed
Some parts changed
No parts changed
No parts changed
—
—
—
LCD PANEL
42" WIDE LCD Panel Module Unit
MAIN Unit
R2015
R2022
R2025
R2026
R2078
R2079
Resistor, 4.7k 1/16W Metal Oxide
Resistor, 4.7k 1/16W Metal Oxide
Resistor, 1k 1/16W Metal Oxide
Resistor, 1k 1/16W Metal Oxide
Resistor, 10k 1/16W Metal Oxide
Resistor, 10k 1/16W Metal Oxide
—
—
VRS-CZ1JF472JY
VRS-CZ1JF102FY
—
VRS-CZ1JF103FY
—
CABINET AND MECHANICAL PARTS
Please refer to a Parts list.
PACKING PARTS AND ACCESSORIES
Please refer to a Parts list.
i
R1LK420D3LF21
VRS-CZ1JF472JY
—
—
VRS-CZ1JF102FY
—
VRS-CZ1JF103FY
—
Add
Delete
Delete
Add
Delete
Add
LC-42D62U/LC-62C42U
LC-42D62U/LC-62C42U
SAFETY PRECAUTION
Service Manual
IMPORTANT SERVICE SAFETY PRECAUTION
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the
servicing guidelines which follow:
„WARNING
•
1. For continued safety, no modification of any circuit should be
attempted.
Use an AC voltmeter having with 5000 ohm per volt, or higher, sensitivity or measure the AC voltage drop across the resistor.
•
Connect the resistor connection to all exposed metal parts having a
return to the chassis (antenna, metal cabinet, screw heads, knobs
and control shafts, escutcheon, etc.) and measure the AC voltage
drop across the resistor.
2. Disconnect AC power before servicing.
All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a nonpolarized adaptor plug must be used
only for the purpose of completing these checks.)
C A U T I O N : F O R C O N T I N U E D PROTECTION
AGAINST A RISK OF FIRE REPLACE ONLY WITH
SAME TYPE FUSE.
Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or
more is excessive and indicates a potential shock hazard which
must be corrected before returning the monitor to the owner.
F701 (125V, 8A)
F4702/F4704/F5702 (125V, 7A)
F4701/F4703/F5701 (250V, 3A, 115 C)
O
DVM
AC SCALE
„BEFORE RETURNING THE RECEIVER (Fire &
Shock Hazard)
1.5k ohm
10W
Before returning the receiver to the user, perform the following
safety checks:
3. Inspect all lead dress to make certain that leads are not pinched,
and check that hardware is not lodged between the chassis and
other metal parts in the receiver.
0.15 µF
TEST PROBE
4. Inspect all protective devices such as non-metallic control knobs,
insulation materials, cabinet backs, adjustment and compartment
covers or shields, isolation resistor-capacitor networks, mechanical
insulators, etc.
5. To be sure that no shock hazard exists, check for leakage current in
the following manner.
•
Plug the AC cord directly into a 120 volt AC outlet.
•
Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15µF capacitor in series with all exposed metal cabinet
parts and a known earth ground, such as electrical conduit or electrical ground connected to an earth ground.
TO EXPOSED
METAL PARTS
CONNECT TO
KNOWN EARTH
GROUND
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have
special safety-related characteristics.
For continued protection, replacement parts must be identical to those
used in the original circuit.
These characteristics are often not evident from visual inspection, nor
can protection afforded by them be necessarily increased by using
replacement components rated for higher voltage, wattage, etc.
The use of a substitute replacement parts which do not have the same
safety characteristics as the factory recommended replacement parts
shown in this service manual, may create shock, fire or other hazards.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by " " and shaded areas in the Replacement Parts List
and Schematic Diagrams.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
ii
LC-42D62U/LC-62C42U
PRECAUTIONS A PRENDRE LORS DE LA REPARATION
Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux
conseils suivants.
AVERTISSEMENT
• A l'aide de deux fils à pinces, brancher une résistance de 1.5 kΩ
10 watts en parallèle avec un condensateur de 0.15µF en série
avec toutes les pièces métalliques exposées du coffret et une terre
connue comme une conduite électrique ou une prise de terre
branchée à la terre.
1. N'entreprendre aucune modification de tout circuit. C'est dangereux.
2. Débrancher le récepteur avant toute réparation.
• Utiliser un voltmètre CA d'une sensibilité d'au moins 5000Ω/V pour
mesurer la chute de tension en travers de la résistance.
PRECAUTION: POUR LA PROTECTION CONTINUE CONTRE LES RISQUES D'INCENDIE,
REMPLACER LE FUSIBLE
• Toucher avec la sonde d'essai les pièces métalliques exposées qui
présentent une voie de retour au châssis (antenne, coffret métallique, tête des vis, arbres de commande et des boutons, écusson,
etc.) et mesurer la chute de tension CA en-travers de la résistance.
Toutes les vérifications doivent être refaites après avoir inversé la
fiche du cordon d'alimentation. (Si nécessaire, une prise
d'adpatation non polarisée peut être utilisée dans le but de terminer ces vérifications.)
La tension de pointe mesurèe ne doit pas dépasser 0.75V (correspondante au courant CA de pointe de 0.5mA).
Dans le cas contraire, il y a une possibilité de choc électrique qui
doit être supprimée avant de rendre le récepteur au client.
F701 (125V, 8A)
F4702/F4704/F5702 (125V, 7A)
F4701/F4703/F5701 (250V, 3A, 115 C)
O
VERIFICATIONS CONTRE L'INCEN-DIE ET LE
CHOC ELECTRIQUE
Avant de rendre le récepteur à l'utilisateur, effectuer les vérifications suivantes.
3. Inspecter tous les faisceaux de câbles pour s'assurer que les fils
ne soient pas pincés ou qu'un outil ne soit pas placé entre le châssis et les autres pièces métalliques du récepteur.
DVM
ECHELLE CA
4. Inspecter tous les dispositifs de protection comme les boutons de
commande non-métalliques, les isolants, le dos du coffret, les couvercles ou blindages de réglage et de compartiment, les réseaux
de résistancecapacité, les isolateurs mécaniques, etc.
1.5k ohm
10W
5. S'assurer qu'il n'y ait pas de danger d'électrocution en vérifiant la
fuite de courant, de la facon suivante:
•
0.15 µF
SONDE D'ESSAI
Brancher le cordon d'alimentation directem-ent à une prise de courant de 120V. (Ne pas utiliser de transformateur d'isolation pour
cet essai).
AUX PIECES
METALLIQUES
EXPOSEES
BRANCHER A UNE
TERRE CONNUE
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
AVIS POUR LA SECURITE
Pour assurer la protection, ces pièces doivent être identiques à celles
utilisées dans le circuit d'origine. L'utilisation de pièces qui n'ont pas
les mêmes caractéristiques que les pièces recommandées par l'usine,
indiquées dans ce manuel, peut provoquer des électrocutions, incendies, radiations X ou autres accidents.
De nombreuses pièces, électriques et mécaniques, dans les téléviseur ACL présentent des caractéristiques spéciales relatives à la sécurité, qui ne sont souvent pas évidentes à vue. Le degré de protection ne peut pas être nécessairement augmentée en utilisant des
pièces de remplacement étalonnées pour haute tension, puissance,
etc.
Les pièces de remplacement qui présentent ces caractéristiques sont
identifiées dans ce manuel; les pièces électriques qui présentent ces
particularités sont identifiées par la marque " " et hachurées dans la
liste des pièces de remplacement et les diagrammes schématiques.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
iii
LC-42D62U/LC-62C42U
PRECAUTIONS FOR USING LEAD-FREE SOLDER
„Employing lead-free solder
•
“PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The
alphabetical character following LF shows the type of lead-free solder.
Example:
Indicates lead-free solder of tin, silver and copper.
Indicates lead-free solder of tin, silver and copper.
„Using lead-free wire solder
•
When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause damage or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 °C, we recommend you to use a dedicated soldering
bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.
„Soldering
•
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 °C which is higher than the conventional lead solder by 40 °C, and as it has poor
solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be
peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the
steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as
required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
•
Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
PARTS CODE
ZHNDAi123250E
ZHNDAi126500E
ZHNDAi12801KE
PRICE
RANK
BL
BK
BM
PART
DELIVERY
J
J
J
DESCRIPTION
φ0.3mm 250g (1roll)
φ0.6mm 500g (1roll)
φ1.0mm 1kg (1roll)
iv
LC-42D62U/LC-62C42U
CHAPTER 1. SPECIFICATIONS
LC-42D62U/LC-62C42U
Service Manual
[1] SPECIFICATIONS
Item
Model: LC-42D62U/LC-62C42U
LCD panel
42" Advanced Super View & BLACK TFT LCD
Number of dots
6,220,800 dots (1920
TV
Function
1080
3 dots)
TV-standard (CCIR)
American TV Standard ATSC/NTSC System
Receiving
Channel
VHF/UHF
VHF 2-13ch, UHF 14-69ch
CATV
1-135ch (non-scrambled channel only)
Digital Terrestrial
2-69ch
Broadcast (8VSB)
Digital cable*1
1-135ch (non-scrambled channel only)
(64/256 QAM)
Audio multiplex
BTSC System
Audio out
10W
Terminals Rear INPUT 1
AV in, COMPONENT in
INPUT 2
AV in, COMPONENT in
INPUT 3
S-VIDEO in, AV in
INPUT 4
Audio in, HDMI in with HDCP
INPUT 5
HDMI in with HDCP
ANTENNA
75
2
Unbalance, F Type
1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
DIGITAL AUDIO OUTPUT Optical Digital audio output
OUTPUT
Audio out
OSD language
English/French/Spanish
Power Requirement
AC 120 V, 60 Hz
Power Consumption
247 W
Weight (approx.)
Dimension* 2
(W H
D)
w/o stand
66.2 lbs./30.0 kg
with stand
73.5 lbs./33.3 kg
w/o stand
4019/ 32
2637/ 64
with stand
4019/ 32
287/ 8
Operating temperature
1 (PCM/Dolby Digital)
59/ 32 inch
111/ 2 inch
+ 32°F to + 104°F (0°C to + 40°C)
* 1 Emergency alert messages via Cable are unreceivable.
* 2 The dimensional drawings are shown on the inside back cover.
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
1–1
LC-42D62U/LC-62C42U
CHAPTER 2. OPERATION MANUAL
LC-42D62U/LC-62C42U
Service Manual
[1] OPERATION MANUAL
Part names
TV (Front)
Remote control sensor
OPC indicator*
OPC sensor*
SLEEP indicator**
POWER indicator**
NOTE
*OPC: Optical Picture Control.
**TV status indicator.
TV (Rear)
Channel buttons
(CH / )
HDMI terminal (INPUT 5)
Volume
buttons
(VOL - / + )
HDMI terminal (INPUT 4)
INPUT button
POWER button
DIGITAL AUDIO OUTPUT terminal
Antenna/Cable in
AUDIO terminal (INPUT 4)
INPUT 3 terminals
INPUT 1 terminals
AC INPUT terminal
INPUT 2 terminals
AUDIO OUTPUT terminals
2–1
LC-42D62U/LC-62C42U
Part names
Remote control unit
1
1
2
3
14
4
2
3
15
5
6
7
16
8
9
10
4
11
12
13
5
6
17
7
18
8
19
9
20
10
21
22
11
23
24
25
26
12
13
27
14
15
16
TV POWER: Switch the TV power on or enters standby
mode.
DISPLAY: Display the channel information.
SOURCE POWER: Turns the power of the external
equipment on and off.
External equipment operational buttons: Operate the
external equipment.
0 _ 9: Set the channel.
(DOT):
INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2,
INPUT 3, INPUT 4, INPUT 5)
VOL / : Set the volume.
SURROUND: Select Surround settings.
FREEZE: Set the still image. Press again to return to
normal screen.
EXIT: Turn off the menu screen.
SLEEP: Set the sleep timer.
AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts.
FUNCTION: Switches the remote control for TV, CBL/
SAT, VCR, DVD and AUDIO operation. Indicator lights up
for the current mode.
* To enter the code registration mode, you need to press
FUNCTION and DISPLAY at the same time.
LIGHT : When pressed all buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within about 5 seconds. This
button is used for performing operations in low-light
situations.
VIEW MODE: Select the screen size.
17 ENT: Jumps to a channel after selecting with the 0 _ 9
buttons.
18 FLASHBACK: Return to the previous channel or external
input mode.
19 CH / : Select the channel.
20 MUTE: Mute the sound.
21 MENU: Display the menu screen.
22
/ / / /ENTER: Select a desired item on the
screen.
23 RETURN: Return to the previous menu screen.
24 FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4 different
categories.
While watching, you can toggle the selected channels by
pressing A, B, C and D.
25 FAVORITE: Register favorite channel.
26 CC: Display captions from a closed-caption source.
27 AV MODE: Select an audio or video setting. (When the
input source is TV, INPUT 1, 2 or 3: STANDARD, MOVIE,
GAME, USER, DYNAMIC (Fixed), DYNAMIC. When
the input source is INPUT 4 or 5: STANDARD, MOVIE,
GAME, PC, USER, DYNAMIC (Fixed), DYNAMIC)
NOTE
When using the remote control unit, point it at the TV.
2–2
LC-42D62U/LC-62C42U
Appendix
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
Before performing work make sure to turn off the TV.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
2
Hex key
Unfasten the four screws used to secure the stand in
place.
Detach the stand from the TV. (Hold the stand so it will
not drop from the edge of the base area.)
NOTE
To attach the stand, perform the above steps in reverse order.
Setting the TV on the wall
CAUTION
This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use
of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
You can ask a qualified service professional about using an optional AN-37AG2/AN-52AG1 bracket to mount the
TV to the wall.
Carefully read the instructions that come with the bracket before beginning work.
About setting the TV angle and height adjustment
Hanging on the wall
AN-37AG2/AN-52AG1 wall mount bracket.
0° or 5°
For AN-52AG1
0/5/10/15/20°
Vertical mounting
- 5/0/ + 5 cm
(can be moved
5 cm up or
down)
Angular mounting
AN-37AG2
AN-52AG1
NOTE
Detach the cable clamps on the rear of the TV when using the optional mount bracket.
2–3
LC-42D62U/LC-62C42U
Basic adjustment settings
Menu items for TV/INPUT 1/2/3
Menu items for HDMI (INPUT 4/5)
Picture
Picture
OPC
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Color Temp.
Black
3D-Y/C
Monochrome
Film Mode
Range of OPC
OPC
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Color Temp.
Black
Monochrome
Film Mode
Range of OPC
Audio
Audio
Treble
Bass
Balance
Surround
Treble
Bass
Balance
Surround
Power Control
Power Control
No Signal Off
No Operation Off
No Signal Off
No Operation Off
Setup
Setup
Input Skip
Input Signal
Input Label
Position
Language
Reset
EZ Setup
CH Setup
Antenna Setup-DIGITAL
Input Skip
Input Label
Parental CTRL
Position
Language
Reset
Option
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
Option
Audio Only
Digital Noise Reduction
Input Select
Output Select
Color System
Caption Setup
Program Title Display
Favorite CH
NOTE
Some menu items may not be displayed depending on the
selected input source.
Digital Setup
Audio Setup
2–4
LC-42D62U/LC-62C42U
CHAPTER 3. DIMENSIONS
LC-42D62U/LC-62C42U
Service Manual
[1] DIMENSIONS
Unit: inch/(mm)
2117/ 64 (540)
4019/ 32 (1031)
325/ 32 (96)
59/ 32 (134)
1637/ 64 (421)
2023/ 32 (526.0)
2637/ 64 (675)
111/ 2 (292)
77/ 8 (200)
77/ 8 (200)
323/ 64 (85)
29/ 32 (58)
287/ 8 (733)
3647/ 64 (933.0)
3–1
LC-42D62U/LC-62C42U
Service
CHAPTER 4. REMOVING OF MAJOR PARTS
LC-42D62U/LC-62C42U
Manual
[1] REMOVING OF MAJOR PARTS
1. Remove the SD Card Cover.
2. Remove the 4 lock screws and detach the Stand Base Ass'y.
3. Remove the 12 lock screws, 5 lock screws and detach the Rear Cabinet.
3
1
SD Card Cover
3
2
Rear Cabinet
Stand Base Ass'y
4–1
LC-42D62U/LC-62C42U
4. Remove the 4 lock screws and detach the Chassis Fixing Angle.
5. Remove the 4 lock screws and detach the Center Angle (L)(R).
6. Remove the 2 lock screws and detach the Stand Assist Angle.
7. Remove the 2 lock screws and detach the Stand Assist Cover.
8. Remove the 4 lock screws and detach the Stand Fixing Angle.
9. Remove the 7 lock screws, 1 lock screw and detach the MAIN Shield and Earth Plate.
5
9
Center Angle (L)
Center Angle (R)
9
5
Earth Plate
MAIN Shield
Stand Fixing Angle
8
Chassis Fixing Angle
Stand Assist Cover
6
7
4
Stand Assist Angle
4
4–2
LC-42D62U/LC-62C42U
10.Disconnect all the connectors from all the PWBs.
11.Remove the Top Cover Ass'y. Remove the 1 lock screw from the Top Cover Ass'y and detach the KEY Unit.
Top Cover Ass'y
KEY Unit
11
10
10
10
10
4–3
LC-42D62U/LC-62C42U
12.Remove the 7 lock screws and detach the Tray Chassis.
13.Remove the 2 lock screws, 3 lock screws, 2 lock screws and detach the Terminal Angle.
14.Remove the 5 lock screws and detach the POWER Unit.
15.Remove the 4 lock screws and detach the TERMINAL Unit.
16.Remove the 3 lock screws, 3 lock screws and detach the MAIN PWB Radiator and MAIN Unit.
17.Remove the 2 lock screws and detach the Speaker (L)(R).
18.Remove the 2 lock screws and detach the R/C, LED Unit.
16
MAIN PWB
Radiator
14
16
MAIN Unit
16
13
12
13
POWER Unit
Tray Chassis
13
Terminal Angle
TERMINAL Unit
15
Speaker (R)
Speaker (L)
17
18
R/C, LED Unit
4–4
17
LC-42D62U/LC-62C42U
19.Remove the 4 lock screws and detach the Tray Fixing Angle (L)(R).
20.Remove the 7 lock screws and detach the Lug Angle Top.
21.Remove the 8 lock screws and detach the Lug Angle Bottom.
22.Remove the LCD Panel Module.
Lug Angle Top
20
20
20
20
20
19
19
Tray Fixing Angle (R)
19
Tray Fixing Angle (L)
21
21
21
21
19
21
21
Lug Angle Bottom
4–5
LC-42D62U/LC-62C42U
PartsGuide
PARTS GUIDE
No. S86V9LC42D62U
Note:
The reference numbers on the PWB
are arranged in alphabetical order.
MODELS
LC-42D62U
LC-62C42U
CONTENTS
[1]
[2]
[3]
PRINTED WIRING BOARD
ASSEMBLIES (NOT
REPLACEMENT ITEM)
LCD PANEL (NOTE: THE PARTS
HERE SHOWN ARE SUPPLIED AS
AN ASSEMBLY BUT NOT
INDEPENDENTLY.)
DUNTKD934FM03/04 (LC-42D62U/
LC-62C42U) (MAIN Unit)
[4]
CABINET AND MECHANICAL
PARTS
[5]
SUPPLIED ACCESSORIES
[6]
PACKING PARTS (NOT
REPLACEMENT ITEM)
[7]
SERVICE JIGS (USE FOR
SERVICING)
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
LC-42D62U/LC-62C42U
NO.
PARTS CODE
PRICE NEW
RANK MARK
PART
DELIVERY
DESCRIPTION
[1] PRINTED WIRING BOARD ASSEMBLIES (NOT REPLACEMENT ITEM)
N
N
N
N
N
N
N
DUNTKD934FM03
DUNTKD934FM04
DUNTKD935FM03
DUNTKD935FM04
DUNTKD909FM02
DUNTKD910FM02
RDENCA192WJQZ
CQ
CQ
BH
AQ
AH
BU
N
N
N
N
N
N
N
R
R
X
X
X
X
X
MAIN Unit
MAIN Unit
TERMINAL Unit
TERMINAL Unit
R/C, LED Unit
KEY Unit
POWER Unit
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
[LC-62C42U]
[2] LCD PANEL (NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY.)
N
R1LK420D3LF21
EQ
X
42" WIDE LCD Panel Module Unit
[3] DUNTKD934FM03/04 (LC-42D62U/LC-62C42U) (MAIN Unit)
R2015
R2026
R2079
VRS-CZ1JF472JY
VRS-CZ1JF102FY
VRS-CZ1JF103FY
AA
AA
AB
J
J
J
Resistor, 4.7k 1/16W Metal Oxide
Resistor, 1k 1/16W Metal Oxide
Resistor, 10k 1/16W Metal Oxide
2
LC-42D62U/LC-62C42U
[4] CABINET AND MECHANICAL PARTS
3
3-1
8
3-2
KEY Unit
34
51
20
47
1-10
40
22
41
36
1
20
1-7
1-7
1-1
1-9
1-5
41
1-7
1-7
1-6
37
1-7
1-7
47
1-10
1-3
48
2
44
14
42
26
1-9
1-8
1-8
1-9
1-8
1-9
44
43
1-4
21
2-2
43
39
POWER Unit
2-1
R/C, LED Unit
1-2
21
43
45
43
52
38
43
6
43
16
43
43
49
6-2
7-1
48
6-1
7-2
48
7
9-2
43
45
43
31
53
43
19
18
45
24
11
45
33
9-3
43 50
16
17
29
27
12
15
23 TERMINAL Unit
5
46
32
10
13
4
54
25
48
48
48
3
43
43 43
56
30
55
9-1
56 45
30
9-3 9-3
43
48
MAIN Unit 28
9-4 9-4
9
48
43 45
35
48
LC-42D62U/LC-62C42U
NO.
PARTS CODE
PRICE NEW
RANK MARK
PART
DELIVERY
DESCRIPTION
[4] CABINET AND MECHANICAL PARTS
1
1
1-1
1-2
1-3
1-4
1-5
1-6
1-6
1-7
1-8
1-9
1-10
2
2-1
2-2
3
3-1
3-2
4
4
5
6
6-1
6-2
7
7-1
7-2
8
9
9-1
9-2
9-3
9-4
10
11
12
13
14
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
CCABAB600WJ01
CCABAB600WJ02
Not Available
Not Available
Not Available
Not Available
Not Available
HPNLSA090WJSA
HPNLSA090WJSB
PSPAHB027WJZZ
Not Available
Not Available
Not Available
CCABBA943WJ01
Not Available
LHLDWA131WJKZ
CCOVAB914WJ01
Not Available
JBTN-A614WJKA
CDAi-A327WJ01
CDAi-A327WJ03
CDAi-A328WJ01
CANGKA839WJ01
Not Available
LHLDWA120WJKZ
CANGKA840WJ01
Not Available
LHLDWA120WJKZ
R1LK420D3LF21
CCHSMA341WJ02
Not Available
LHLDWA102WJKZ
LHLDWA120WJKZ
LHLDWA123WJKZ
GCOVAA678WJKA
GCOVAB912WJKA
HiNDPB715WJSA
HiNDPB893WJSA
HiNDPB993WJSA
HiNDPB994WJSA
LANGKA820WJFW
LANGKA841WJFW
LANGKA879WJFW
LANGKA881WJFW
LANGKA882WJFW
LX-HZA003WJFN
LANGTA401WJFW
LHLDWA141WJZZ
LHLDWA150WJKZ
LHLDZA806WJKZ
LX-BZA146WJF7
LX-BZA147WJF8
LX-NZ3047GEZZ
PRDARA390WJFW
PSLDMA910WJN1
PSPAZA917WJKZ
PSPAZB192WJKZ
QCNCWA496WJZZ
QCNW-E249WJPZ
QCNW-E897WJQZ
QCNW-E899WJQZ
QCNW-F017WJQZ
QCNW-F018WJQZ
QCNW-F019WJQZ
QCNW-F020WJQZ
QPWBHD978WJQZ
RSP-ZA201WJZZ
Not Available
XBBS740P06000
XBPS930P08JS0
XBPS730P06WS0
XBPS930P08000
XEBS930P10000
XEBS940P20000
LHLDW1141CEZZ
PMLT-A390WJZZ
PSLDMB066WJZZ
RCORFA020WJZZ
QEARPA228WJFW
XEBS930P08000
PCLiCA008WJZZ
LBSHZA005WJZZ
-
AF
-
AY
AB
AZ
AB
EQ
BA
AB
AB
AB
AG
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
AF
AH
AH
AH
AK
AM
AU
AL
AM
AS
AD
AC
AC
AC
AE
AB
AM
AV
AK
AG
AK
AH
AF
AP
AH
AM
AN
AQ
AY
AZ
AA
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
AB
AA
AA
AA
AE
N
N
AN
S
AA
S
AB
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
R
R
R
X
X
R
X
X
X
X
X
X
X
X
X
J
X
X
J
X
X
X
J
Front Cabinet Ass'y
Front Cabinet Ass'y
Front Cabinet
LED Cover
Front Cover
Badge, "SHARP"
Shaine Trim
SP-Net
SP-Net
Spacer, x6
Spacer, x3
Spacer, x4
Screw, x4
Rear Cabinet Ass'y
Rear Cabinet
Wire Holder (RWC-30SB)
Top Cover Ass'y
Top Cover
Operation Button
Stand Base Ass'y
Stand Base Ass'y
Stand Support Ass'y
Lug Angle Top Ass'y
Lug Angle Top
Wire Holder
Lug Angle Bottom Ass'y
Lug Angle Bottom
Wire Holder, x8
42" WIDE LCD Panel Module Unit
Tray Chassis Ass'y
Tray Chassis
Wire Holder
Wire Holder, x4
Wire Holder, x2
SD Card Cover
Stand Assist Cover
Terminal Label
Jack Indicator
Model Label
Model Label
Terminal Angle
Tray Fixing Angle, x2
Stand Fixing Angle
Stand Assist Angle
Chassis Fixing Angle-A
Screw, x2 (for SP)
Center Angle, x2
Wire Holder (for LCD INV)
Wire Holder (for IF PWB)
Wire Holder (for Radiator)
Screw, x4 (for Stand Ass'y)
Screw, x4 (for Stand)
Nut
Heat Sink (for MAIN PWB)
MAIN Shield
Cool Sheet, x2
Cool Sheet
Connecting Cord (F-RCA)
Connecting Cord (Tuner)
Connecting Cord (KM)
Connecting Cord (LP)
Connecting Cord (SP)
Connecting Cord (RA)
Connecting Cord (PH, PD)
Connecting Cord (LA)
Connecting Cord (LV)
Speaker, x2
No. Label
Screw, x33 (for Ang)
Screw, x5 (for Cab-B)
Screw, x24 (for Ang, x7/PWB, x17)
Screw, x2 (for HDMI)
Screw, x3 (for LED, x2/SOUSA, x1)
Screw, x22 (for Cab-B)
Wire Holder (for LV)
Spacer
Shield, x2
Core
Earth Plate
Screw, x3 (for Jack)
Rivet
Clip, x2
4
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
[LC-62C42U]
LC-42D62U/LC-62C42U
[5] SUPPLIED ACCESSORIES
X1
AC Cord
X2
X3
X6
Operation Manual
NO.
PARTS CODE
X7
X8
"AAA" Size Battery
PRICE NEW
RANK MARK
X4
Cable Clamp
Remote Control Unit
PART
DELIVERY
Cable Band
X10
Stand Unit
DESCRIPTION
[5] SUPPLIED ACCESSORIES
!
X1
X2
X3
X4
X5
X6
X6
X7
X8
X8
X9
X10
QACCDA039WJPZ
RRMCGA535WJSA
LHLDWA131WJKZ
LHLDWA083WJ00
TCADEA208WJZZ
TiNS-C762WJZZ
TiNS-C763WJZZ
Not Available
CDAi-A327WJ02
CDAi-A327WJ04
TCAUHA184WJZZ
LHLDWA012WJKZ
AR
BA
AE
AD
AQ
AM
-
N
N
N
N
N
N
AD
AC
X
X
J
X
X
X
X
X
X
X
J
AC Cord
Remote Control Unit
Cable Clamp
Cable Band
Enquete Card
Operation Manual
Operation Manual
"AAA" Size Battery
Stand Unit
Stand Unit
Setup Guide
Wire Holder
5
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
[LC-62C42U]
[LC-62C42U]
LC-42D62U/LC-62C42U
[6] PACKING PARTS (NOT REPLACEMENT ITEM)
S11
S10
S4
S6
S7
S8
S9
S13
S4
S5
S1
S3
S12
S4
S4
S2
6
LC-42D62U/LC-62C42U
NO.
PARTS CODE
PRICE NEW
RANK MARK
PART
DELIVERY
DESCRIPTION
[6] PACKING PARTS (NOT REPLACEMENT ITEM)
S1
S1
S2
S3
S4
S5
S6
S6
S7
S8
S9
S10
S11
S12
S13
SPAKCD081WJZZ
SPAKCD082WJZZ
SPAKCD085WJZZ
SPAKPA774WJZZ
SPAKXB298WJZZ
SPAKFB110WJZZ
SPAKFB111WJZZ
SPAKFB112WJZZ
SPAKPA780WJZZ
SPAKPA781WJZZ
SSAKHA020WJZZ
SSAKA0101GJZZ
SSAKAA032WJZZ
TLABKA009WJZZ
SPAKPA602WJZZ
-
N
N
N
N
N
N
N
N
N
N
-
Packing Case
Packing Case
Packing Case (Bottom)
Wrapping Paper (Monitor)
Packing Add.
Packing Case (Stand)
Stand Pad
Stand Pad
Wrapping Paper (Mirror Mat Base)
Wrapping Paper (Mirror Mat Sup)
Polyethylene Bag (for Screw)
Polyethylene Bag
Polyethylene Bag
No. Label
Wrapping Paper (Mirror Mat B)
RCA Cable L=1500mm, Tuner Extension
12pins L=1000mm, Main to Power Unit PH (PA)
6pins L=1000mm, Main to Power Unit PD (MI)
41pins L=400mm, Main to LCD Controller Unit (LV)
14pins L=1300mm,
Main/Power to Inverter Unit LA (LB)
20pins L=1000mm, Main to LCD Controller Unit (LP)
45pins FFC L=1000mm,
LCD Controller Unit to LCD panel, X 4pcs used
[7] SERVICE JIGS (USE FOR SERVICING)
N
N
N
N
N
N
N
N
N
QCNW-C799WJPZ
QCNW-D483WJQZ
QCNW-E068WJQZ
QCNW-E134WJQZ
QCNW-F177WJQZ
AG
AX
AS
BG
BA
J
J
J
J
J
QCNW-F178WJQZ
QCNW-F197WJQZ
AW
AR
J
J
7
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
[LC-62C42U]
[LC-42D62U]
LC-42D62U/LC-62C42U
COPYRIGHT
2006 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.
TQ2052-S
Sep. 2006 Printed in Japan
Design and Production Information
Design: Japan
Production: SEMEX
SY. KD
SHARP CORPORATION
AV Systems Group
CS Promotion Center
Yaita, Tochigi 329-2193, Japan