SL50
Thank you for buying a Samsung Camera.
This manual will help you learn to capture
images, share or print your photos, and edit
photos with the accompanying software.
Please read this manual thoroughly.
User Manual
Instructions
Getting to know your camera
Use this camera in the following order.
Thank you for buying a Samsung Digital Camera.
Setting up the applica- To use this camera with a PC,
install the application software
tion software
first. After this has been done, the
stored images in the camera can be
moved to the PC and can be edited
by an image editing program. (p.89)
Take a picture
Insert the USB cable
Check the camera's
power
Take a picture. (p.21)
Insert the supplied USB cable
into the PC’s USB port and the
camera’s USB connection
terminal. (p.89)
Check the camera’s power. If the
power is turned off, preset the
camera button to turn it on.
Open Windows Explorer and
Check [Removable Disk] search for [Removable Disk].
(p.90)
å Prior to using this camera, please read the user manual
thoroughly.
å If you require After Sales service, please bring the camera and the
cause of the camera malfunction (such as battery, memory card
etc.) to an Authorised Service center.
å Please check that the camera is operating properly prior to when
you intend to use it (e.g. for a trip or an important event) to avoid
disappointment. Samsung takes no responsibility for any loss or
damage that may result from camera malfunction.
å Keep this manual in a safe place.
å If you use a card reader to copy the images on the memory card to
your PC, the images could be damaged. When transferring the
images taken with the camera to your PC, be sure to use the
supplied USB cable to connect the camera to your PC. Please note
that the manufacturer holds no responsibility for loss or damage of
images on the memory card due to the use of a card reader.
å The contents and illustrations of this manual are subject to change
without prior notice for upgrading the camera functions.
Ä Microsoft, Windows and Windows logo are registered trademarks
of Microsoft Corporation incorporated in the United States and/or
other countries.
Ä Adobe and Reader are either trademarks or registered
trademarks in the United States and/or other countries.
Ä All brand and product names appearing in this manual are
registered trademarks of their respective companies.
Ä For Open Source License information, refer to the
"OpenSourceInfo.pdf" in the provided CD-ROM.
001
Danger
Warning
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
åDo not attempt to modify this camera in any way. To do so may
result in fire, injury, electric shock or severe damage to you or your
camera. Internal inspection, maintenance and repairs should only
be carried out by your dealer or Samsung Camera Service center.
åPlease do not use this product in close proximity to flammable or
explosive gases, as this could increase the risk of explosion.
åShould any form of liquid or a foreign object enter the camera, do
not use it. Switch off the camera, and then disconnect the power
source. You must contact your dealer or Samsung Camera Service
center. Do not continue to use the camera as this may cause a fire
or electric shock.
åDo not insert or drop metallic or inflammable foreign objects into
the camera through access points e.g. the memory card slot and
battery chamber. This may cause a fire or electric shock.
åDo not operate this camera with wet hands. This could pose a risk
of electric shock.
åDo not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes may cause
eyesight damage.
åFor safety reasons keep this product and accessories out of reach
of children or animals to prevent accidents e.g.:
- Swallowing battery or small camera accessories. If an accident
should occur, please consult a doctor immediately.
- There is the possibility of injury from the camera’s moving parts.
åBattery and camera may become hot during prolonged use and it
may result in camera malfunction. Should this be the case, allow
the camera to sit idle for a few minutes to allow it time to cool.
åDo not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places
of extremes in temperature. Exposure to extreme
temperatures may adversely affect the camera’s internal
components and could cause a fire.
åWhen in use, do not cover the camera or charger. This may cause
heat to build up and distort the camera body or cause a fire. Always
use the camera and its accessories in a well ventilated area.
002
Caution
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
åLeaking, overheating or damaged battery could result in fire or injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
åRemove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera’s components.
åDo not fire the flash while it is in contact with hands or objects. Do
not touch the flash after using it continuously. It may cause burns.
åDo not move the camera while it is switched on if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the cords
or cables and cause a fire or electric shock.
åTake care not to touch the lens or lens cover to avoid taking an
unclear image and possibly causing camera malfunction.
åAvoid obstructing the lens or the flash when you capture an image.
åWhen using this camera in low temperatures, you may experience
the following. These are not camera malfunctions and usually
recover at normal temperature.
- It takes longer to turn on the LCD monitor and the color may differ
from the subject.
- When changing the composition, there may be an after image on
the LCD monitor.
åCredit cards may be demagnetized if left near the case. Avoid
leaving magnetic strip cards near the case.
åNever connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
Contents
READY
007
System chart
008
Identification of features
012
015
016
Connecting to a power source
Inserting the memory card
Instructions on how to use the memory
card
When using the camera for the first time
007
007
008
009
010
010
011
011
011
018
Package Contents
Sold Separately
Front & Top
Back
Bottom
5 Function button
Self-timer lamp
Camera Status Lamp
Mode icon
RECORDING 019 LCD monitor indicator
020
021
021
021
023
023
024
025
How to use the menu
Starting the recording mode
Selecting modes
How to use the Smart Auto mode
How to use the Program mode
How to use the DIS mode
Using the Photo Help Guide mode
How to use the Scene modes
003
Contents
026
027
027
How to use the Movie mode
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
028
Things to watch out for when taking
pictures
Using the camera buttons to set the camera
POWER button
SHUTTER button
ZOOM button
Info(DISP) / Up button
Macro / Down button
Focus lock
Flash / Left button
Self-timer / Right button
MENU button
OK button
Shooting
029
029
029
029
031
031
033
033
035
037
037
037
038
038
039
039
040
040
041
043
043
044
004
How to enable functions using the MENU
button
Photo Size / Movie Size
Quality / Frame rate
Exposure compensation
ISO
White balance
Face Detection
Face Tone
Face Retouch
Auto Focus type
044
045
046
047
047
048
048
049
SETUP
Metering
Photo Style Selector
Image Adjust
ACB
Drive mode
Voice Memo
Voice Recording
Recording the movie clip without voice
050
Sound
051
Display
053
Settings
050
050
050
050
051
051
051
052
052
052
052
053
053
054
054
Volume
Start up sound
Shutter sound
Beep sound
AF sound
Language
Function Description
Start up image
Display Brightness
Quick View
Display Save
Formatting the memory
Initialization
Setting up the Date / Time / Date type
Time Zone
Contents
054
055
055
056
056
057
PLAY
058
058
058
059
059
059
File name
Imprinting the recording date
Auto power off
Auto Focus lamp
Selecting Video out type
Setting the USB
Starting play mode
Playing back a still image
Playing back a movie clip
Movie clip capture function
Playing back a recorded voice
Playing back a voice memo
060 LCD monitor Indicator
061 Using the camera buttons to set the
camera
061 Thumbnail / Enlargement button
061
063
063
064
064
065
067
Smart Album
Info (DISP) / Up button
Play & Pause / OK button
Left / Right / Down / MENU button
Delete button
Setting up the play back function using
the LCD monitor
Edit
067
068
068
069
Resize
Rotating an image
Photo Style Selector
Image Adjust
071
Starting the Multi Slide Show
073
File Options
078
079
079
080
080
082
083
085
PictBridge
PictBridge : Picture Selection
PictBridge : Print Setting
PictBridge : Reset
Important notes
Warning indicator
Before contacting a service center
Specifications
071
071
072
072
072
073
073
074
075
077
Start the Multi Slide Show
Selecting Images
Configure Multi Slide show effects
Setting play interval
Setting Background Music
Deleting images
Protecting images
Voice memo
DPOF
Copy to Card
005
Contents
SOFTWARE 088 Transferring files to your computer
088
For Windows users
092
Transferring files to your computer (for Mac)
094
FAQ
092
006
(for Windows)
For Mac users
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the
equipment contact your nearest Samsung dealer or Samsung service center. Parts and accessories illustrated below may differ from
exact appearance.
Package Contents
Camera
Rechargeable battery
(AD43-00194A)
AC adapter (AD44-00143A) /
USB cable (AD39-00165A)
Camera strap
(Black : AD63-02604A/
Silver : AD63-02596A)
Software CD
(User manual included)
(AD46-00301A)
Quick Start Manual
(AD68-04630A)
Sold Separately
SD/SDHC memory card
(see p.17)
Camera case
AV cable
(AD39-00146A)
Battery charger
(AD44-00164A)
007
Identification of features
Front & Top
Shutter button
POWER button
Flash
AF sensor /
Self-timer lamp
Microphone
Speaker
Lens/ Lens cover
008
Identification of features
Back
Zoom Tele(T) button / Digital zoom
Zoom Wide(W) button / Thumbnail
LCD monitor
Camera status lamp
USB / AV / DC terminal
MENU button
5 function button
Play mode button
Strap eyelet
Fn / Delete button
009
Identification of features
Bottom
5 Function button
Memory card slot
Information / Up button
Flash /
Left button
Self-timer /
Right button
OK / Play & Pause button
Battery chamber
Battery chamber cover
Tripod socket
010
Battery holder
Macro / Down button
Identification of features
Self-timer lamp
Icon
Mode icon
Status
Description
- For the first 8 seconds, the lamp blinks at 1 second
intervals.
Blinking
- For the final 2 seconds, the lamp blinks quickly at
0.25 seconds intervals.
Blinking
For the 2 seconds, the lamp blinks quickly at
0.25 seconds intervals.
A picture will be taken after about 10 seconds and 2
Blinking
seconds later a second picture will be taken.
After pressing the Shutter button, the image is taken
Blinking
in accordance with the subject’s movement.
Camera Status Lamp
Status
Power on
After taking a picture
Description
The lamp turns on and off when the camera
is ready to take a picture
The lamp blinks while saving the image data and
turns off when the camera is ready to take a picture
Refer to p.21 for more information about the camera mode setting.
MODE
MODE
MODE
MODE
MODE
The lamp is off
When the printer is printing The lamp blinks
When the AF activates
The lamp turns on
(The camera focus on the subject)
The lamp blinks
(The camera doesn’t focus on the subject)
Movie
Photo Help
Guide
Night
Portrait
SCENE
Beauty Shot Frame Guide
ICON
ICON
When the USB cable is
inserted into a printer
Scene
DIS
ICON
When the USB cable is
inserted to a PC
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
Program
ICON
When flash battery is charging The lamp blinks
The lamp lights up
(LCD monitor turns off after initializing the device)
Smart Auto
Children
Landscape
Close up
Text
Sunset
Dawn
Backlight
Fireworks
ICON
MODE
Beach&Snow
ICON
011
Connecting to a Power Source
You should use the rechargeable battery BP70A supplied with the
camera. Be sure to charge the battery before using the camera.
Ê BP70A rechargeable battery Specification
Model
BP70A
Type
Lithium lon
Capacity
740mAh
Voltage
3.7V
Charging time
Approximately 150 Minutes
Ê Number of images and battery life: Using the BP70A
Battery life /
Number of images
Conditions
Using the fully charged battery, Default
settings, Program mode, Shot to shot
interval: 30Sec.
Approx. 105 MIN / Changing the zoom position between
Still image
Approx. 210 shots the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
Movie
Using the fully charged battery
Approx. 105 MIN 640x480 image size
30fps frame rate
Ä These figures are measured under Samsung’s standard conditions
and shooting conditions and may vary depending on the user’s
methods.
012
Important information about battery usage.
åWhen camera is not in use, turn off the power.
lease remove the battery if the camera will not be used
åP
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
ow temperatures (below 0°C) can affect the performance of
åL
the battery and you may experience reduced battery life.
å Batteries will usually recover at normal temperatures.
uring extended use of the camera, the camera body may
åD
become warm. This is perfectly normal.
Ê Connecting the AC adapter with the USB cable can be used as an
AC cable, and you can charge the rechargeable battery with the
AC cable.
- Using an AC cable
: Connect the AC adapter to the USB
cable. It can be used as a power
cable.
- Using a USB cable
: Remove the AC adapter.
You can download stored images
to your PC (p.89) or supply the
power to your camera through the
USB cable.
Connecting to a Power Source
Important information about USB cable usage.
åUse a USB cable with the correct specification.
åIf the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
åIf the camera and other devices are connected to the PC at
the same time : remove other device.
åCamera can not be detected using the front side USB port
of computer. In this case, use the back side USB port of
computer.
åIf the USB port of the PC doesn’t meet the power output
standard (5V, 500mA), the battery may not be charged.
åBefore inserting any cables or AC adapter, check the directions
and do not insert by force. It may cause breakage of cable or
camera.
åIf the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether
the battery is inserted correctly.
åIf you charge the battery with the camera power on, the battery
won’t be fully charged. Turn the camera off while charging the
battery.
Ê Charging LED of the AC charger
Ê How to charge the rechargeable battery
Charging LED
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Orange LED is off or blinking
å If you insert the fully discharged battery to charge it, do not turn on
the camera at the same time. The camera may not be turned on
because of the low battery capacity. Charge the battery for more
than 10 minutes before using the camera.
å Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger
is inserted, the camera power may be turned off because the
rechargeable battery is discharged again.
013
Connecting to a Power Source
When using the battery, please keep the following
guidelines. Failure to do so may cause the generation of
heat, fire or explosion
å If you find the battery shape distorted in size, try to contact a
service center. It may present physical dangers.
å Use only the recommended battery charger.
å Do not place the product close to the fire device.
å Do not insert the product into the microwave oven.
å Do not place the product inside a car during the summer.
å Do not place the product in a space with hot temperature and
high humidity range.
å Do not use the product for long time on the carpet, comforter or
electronic mattress.
å Do not leave the product turned on where the air cannot be
circulated.
å Be careful about the battery slot not to be connected with
accessories like necklace, coin, key, watch and so on.
å Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries.
å Do not try to disassemble or perforate the product by using a
sharp pin.
å Do not apply pressure to the product.
å Do not let the product fall down from the height, or do not give a
shock to the product.
å Do not exposure the product to the high temperature over 60℃
(140℉) degree.
å Do not exposure the product to the water or humidity.
å Battery shall not be exposed to excessive heat such as sunshine,
fire or the like.
014
Guidelines of disposal
å Do not throw away the over used battery.
å Destruction by fire is not allowed for disposal of battery.
å The disposal instruction may differ depending on the nation or
the specific region. Please follow the given method of disposal.
Guideline of recharging the battery
å Do not recharge the battery by using the different method other
than the user manual indicates. Failure to follow the correct
procedure may result in fire or explosion.
Connecting to a power source
Inserting the memory card
Ê Insert the battery as shown
Ê I nsert the memory card as shown.
- If the camera does not turn on
after you have inserted battery,
please check whether the
battery (+ / -) direction is right.
- When the battery chamber
cover is open do not force the
battery chamber cover,
this may damage it.
- Turn off the camera’s power
before inserting the memory card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and
the card pins toward the back of
the camera (LCD monitor).
- Do not insert the memory card
the wrong way around.
Doing so may damage the
memory card slot.
here are 4 indicators for battery condition that are displayed on
ÊT
the LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
Low battery
Battery empty
capacity
capacity
(Recharge
(Prepare to
(Prepare to
or use spare
recharge or use recharge or use
battery)
spare battery) spare battery)
Ä When using the camera and the battery in a place that is excessively cold or hot,
the battery status on the LCD may be different from the actual battery status.
015
Instructions on how to use the memory card
å Be sure to format the memory card (see p.53) if you are using a
newly purchased memory card for the first time, if it contains data
that the camera cannot recognize, or if it contains images captured
with a different camera.
å Turn off the camera power whenever the memory card is being
inserted or removed.
å Repeated use of the memory card will eventually reduce the
memory card’s performance. Should this be the case, you will
need to purchase a new memory card. Wear and tear on the
memory card is not covered by the Samsung warranty.
å The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy
impact.
å Do not store the memory card in an environment with strong
electronic or magnetic fields, e.g. near loud speakers or TV
receivers.
å Please do not use or store in an environment where there are
extremes in temperature.
å Do not allow the memory card to become dirty or to come into
contact with any liquid. Should this happen, clean the memory
card with a soft cloth.
å Please keep the memory card in its case when not in use.
å During and after periods of extended use, you may notice that the
memory card is warm. This is perfectly normal.
å Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card
before using this camera.
å Do not use a memory card formatted by another digital camera or
memory card reader.
016
å If the memory card is subjected to any of the following, the
recorded data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
å Samsung cannot be held responsible for lost data.
å It is advisable to copy important data onto other media as backup e.g.
hard disks, CD etc.
å If there is insufficient memory available :
A [Memory Full] message will appear and the camera will not
operate. To optimize the amount of memory in the camera, replace
the memory card or delete unnecessary images stored on the
memory card.
å Don't remove the memory card when the camera status lamp is
blinking as this may cause damage to data on the memory card.
Instructions on how to use the memory card
The camera can use SD/SDHC Memory Cards.
Card pins
When using a 1GB SD memory, the specified shooting capacity will be
as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded image
Super Fine
size
Write protect switch
Label
Still
image
[SD (Secure Digital) memory card]
å The SD/SDHC memory card has a write protect switch that
prevents image files from being deleted or formatted. By sliding
the switch to the bottom of the SD/SDHC memory card, the data
will be protected. By sliding the switch to the top of the SD/SDHC
memory card, the data protection will be cancelled.
å Slide the switch to the top of the SD/SDHC memory card before
taking a picture.
Movie
clip
Fine
30 FPS
15 FPS
About 182 About 334 About 471
-
-
About 200 About 361 About 510
-
-
About 252 About 441 About 611
-
-
About 252 About 444 About 618
-
-
About 334 About 577 About 792
-
-
About 494 About 813 About 1065
-
-
About 1236 About 1670 About 1872
-
-
Normal
-
-
-
About 9'54" About 18'58"
-
-
-
About 26'24" About 49'23"
å The zoom button doesn’t function during the movie recording.
å The recording times can be changed by the zoom operation.
å You can record videos of up to 4GB or 2hours each.
017
When using the camera for the first time
Ê Charge the rechargeable battery fully before using the camera for
the first time.
Ê When the camera is turned on for the first time, a menu will be
displayed on the LCD monitor to set date, time, time zone and
language. This menu will not be displayed again after setting up
the date, time, time zone and language. Set up the date, time,
time zone and language before using this camera.
1. Select the [Date&Time] menu by
pressing the Up/Down button and press
the Right button.
2. Select the desired sub menu by
pressing the Up/Down/Left/Right
button and press the OK button.
Language
:English
Date & Time :10/01/01
Time Zone :London
yyyy mm dd
2010 / 01 / 01
12:00
Back
Off
Set
Left/Right button: S
elects world time/year/month/day/hour/
minute/date type.
Up/Down button : C
hanges the value of each item.
Ê Setting up the language
1. Select the [Language] menu by
pressing the Up/Down button and press
the Right button.
2. Select the desired sub menu by
pressing the Up/Down button and press
the OK button.
Ê Setting up the date, time and date type
Language
Date & Time
Time Zone
:English
English
:London
한국어
:08/12/01
Français
Ê Setting up the Time Zone
Deutsch
Español
Italiano
Back
Set
1. Select the [Time Zone] menu by
pressing the Up/Down button and press
the Right button.
2. Press the Left/Right button to select the
desired mode.
Time Zone
London
[GMT +00:00]
Back
2010/01/01 12:00 PM
DST
Ä For more information about the World Time, refer to the p.54.
018
LCD monitor indicator
Ê The LCD monitor displays information about the shooting
functions and selections.
No.
Description
5
Battery
Icons
p.15
6
Optical / Digital Zoom bar /
Digital Zoom rate
p.29
7
Photo Size / Movie Size
p.38
9
Image Quality /
Frame Rate
Metering
10
Flash
p.33
11
Self-timer /
Drive mode
p.36/
47
8
p.39
p.44
12
Macro
Face Detection · Self-Portrait
13
· Smile Shot · Blink Detection
14
Date / Time
[Image & Full Status]
p.41
2010/01/01 12:00 PM
p.54
15
Camera shake warning
p.28
16
Auto Focus Frame
p.44
17
Image adjust
p.46
Description
1
Recording mode
p.21
18
Photo Style Selector
p.45
2
Voice Memo
p.48
19
ISO / Face Retouch /
Without voice
p.40/43
49
3
Number of available shots
remaining
00001
p.17
20
White Balance /
Face Tone
p.40/
43
Remaining time
00:00:00
p.17
21
Exposure compensation
p.39
22
Aperture Value /
Shutter Speed
-
4
Page
p.31
No.
Memory card icon /
Internal memory icon
Icons
Page
-
019
How to use the menu
1. T
urn on the camera and press the MENU button. A menu for each camera mode appears.
Mode
Smart Auto
Program
Shooting
DIS
Sound
Photo Help...
Display
Scene
Settings
Exit
Movie
Change
2. Use the up or down button to navigate through the menus.
Mode
Smart Auto
Program
Shooting
DIS
Sound
Photo Help...
Display
Settings
Exit
Press the
Up or Down
button.
Scene
Mode
Sound
ISO
Settings
Change
Quality
EV
Display
Movie
Photo Size
Shooting
Exit
Press the
Up or Down
button.
White Balance
Face Detection
Mode
Volume
Start Sound
Shooting
Shutter Sound
Sound
Beep Sound
Display
AF Sound
Settings
Focus Area
Exit
Change
Change
3. Use the left or right button to select a sub menu.
Mode
Shooting
Volume
Start Sound
Shutter Sound
Sound
Beep Sound
Display
AF Sound
Press the
Left or Right
button.
Volume
:Medium
Start Sound
:Off
Shutter Sound
:1
Beep Sound
:1
AF Sound :On
Press the
Left or Right
button.
Volume
Off :Medium
Start Sound
Low:Off
Shutter Sound
Medium
:1
Beep Sound
High
:1
AF Sound :On
Settings
Exit
Change
Exit
Back
4. Select a submenu and click the OK button to save settings and return to the previous window.
020
Back
Set
Starting the recording mode
Selecting modes
How to use the Smart Auto mode(
You can select the shooting modes by using the MENU button on the
back of your camera.
The camera automatically chooses the appropriate camera settings
based on a detected type of scene. It will be helpful if you are not
familiar with the camera settings for various scenes.
1. Insert the battery (p.15). Insert the
battery taking note of the polarity
(+ / -).
Ê How to use the MENU button
1. Press the MENU button and a menu will
be displayed.
2. Insert the memory card (p.15). As this
camera has a 7.5MB internal memory,
you do not need to insert the memory
card. If the memory card is not inserted,
an image will be stored on the internal memory.
If the memory card is inserted, an image will be stored on the
memory card.
2.Press the Up / Down button to select the
[Mode] menu and press the Right button.
3. Select a desired mode by pressing the
Up / Down button and then press the OK
button.
Smart Auto
Program
DIS
3. Close the battery chamber cover.
Photo Help Guide
Scene
Movie
Exit
Mode
Shooting
Sound
Display
Settings
Exit
Back
Smart Auto
Program
DIS
Smart Auto
Program
DIS
Photo Help...
Scene
Movie
Change
)
Photo Help Guide
Scene
Movie
Exit
4. Press the POWER button to turn on the camera.
5. Select the Smart Auto mode by pressing the MENU button.
6. Point the camera towards the subject and compose the image by
using the LCD monitor.
7. Press the Shutter button to capture an image.
Back
Smart Auto
Program
DIS
Photo Help Guide
Scene
Movie
Exit
Back
021
Starting the recording mode
å If the camera does not recognize a proper scene mode, the
default settings will be used.
å Even if there is a face detected, the camera may not select a
portrait mode depending on the subject’s position or lighting.
å The camera may not select the correct scene depending on
shooting environments, such as camera shake, lighting and
distance to the subject.
å The [Night] mode recognizes scenes only when the flash is set
to off. The camera operates the [Tripod] mode after checking the
shooting condition on the tripod for a certain time.
å Despite using a tripod, the camera may not select a tripod mode
depending on the subject’s movement.
022
Ê Each scene is recognized in the following conditions;
[Landscape]
(
) : When shooting outdoor scenes
[White]
(
) : When shooting a white background
[Night]
(
) : When shooting the nighttime scenes
[Night Portrait]
(
) : When shooting people in a dark outdoor place
[Backlight]
(
) : When shooting a backlit scenery without a portrait
[Backlight Portrait] (
) : When shooting a backlit portrait
[Portrait]
(
) : When shooting a portrait
[Macro]
(
) : When shooting close-ups
[Macro Text]
(
) : When shooting texts in a close focus
[Tripod]
(
):W
hen shooting a subject that doesn’t move
for a certain time after the camera is mounted
on the tripod (available only when the camera
recognizes it as nighttime)
[Action]
(
):W
hen shooting a subject making frequent
movements
[Macro Portrait]
(
) : When shooting close-up portrait shot
[Blue Sky]
(
):W
hen shooting blue sky
[Sunset Sky]
(
) : When shooting sunset
[Macro Color]
(
):W
hen shooting close-up shot for the subject
with various colors
[Natural Green]
(
):W
hen shooting nature such as forest and leaves
Starting the recording mode
How to use the Program mode (
)
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
1. Select the Program mode by using the
MENU button. (p.21)
2. Press the MENU button to configure
advanced functions.
How to use the DIS mode (
)
Digital Image Stabilization (DIS) mode.
This mode will reduce the effect of camera shake and help you get
a well exposed image in dim conditions.
1. Select the DIS mode by using the
MENU button. (p.21)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
Ê Things to watch out for using the DIS mode
1. The digital zoom will not operate in the DIS mode.
2. If the lighting condition is brighter than fluorescent lighting
conditions, the DIS will not activate.
3. If the lighting condition is darker than fluorescent lighting
conditions, camera shake warning indicator ( \ ) will display.
For best results only take pictures in situations where the
camera shake warning indicator ( \ ) is not displayed.
4. If the subject is moving, the captured image may be blurred.
5. As the DIS uses the camera's digital signal processor, it may
take a little longer for the camera to process and save the
images.
023
Starting the recording mode
Using the Photo Help Guide mode (
Available functions of the photo help guide
)
å Functions that can be used when focusing is difficult
å Functions that can be used when the image is blurred
å Functions that can be used when filming in the dark
å Functions that can be used when adjusting the picture brightness
å Functions that can be used when adjusting the picture color
Helps the user learn the correct picture taking method and includes
solutions for potential problems that may occur. This also enables
the user to practice the best way to take the pictures.
Photo Help Guide
Photo Help Guide
Photo Help Guide
Features to use when the image is out of focus
Features to reduce camera shake
Features to use in low light conditions
Features to use when adjusting brightness
Features to use when adjusting colors
Photo Help Guide
Features to use when the image is out of focus
Pressing the
Left/Right button
Pressing the OK button
Change
Half-press the shutter button to focus
To focus on a subject 80 cm away or more
To focus on a subject less than 80 cm away
To focus on people’s faces
Back
Pressing the
Left/Right button
Pressing the OK button
Change
1/2
To focus on your subject, halfpress the shutter button:
- Green frame: subject is in focus
- Red frame: subject is out of focus
Back
Practice
Pressing the
Up button
Pressing the
Up/Down button
Photo Help Guide
Pressing the shutter button
Guide list
Press the shutter button
to practice using this
feature.
Pressing the OK button
Guide list
[Function that can be used when focusing is difficult]
024
2/2
When the subject is in focus,
press the shutter button
completely to capture the image
or video. If the subject is out of
focus, try half-pressing the shutter
button again.
Back
Practice
Starting the recording mode
How to use the Scene modes (
The scene modes are listed below.
)
Use the menu to easily configure optimal settings for a variety of
shooting situations.
1. Select the Scene mode by using the
MENU button. (p.21)
2. Press the Right button, then press the
Up/Down button to select the desired
mode.
3. Point the camera towards the subject
and compose the image by using the
LCD monitor.
4. Press the shutter button to capture an
image.
Smart Auto
Beauty Shot
Program
Frame Guide
DIS
Night
Photo Help GuidePortrait
Children
Scene
Movie
Back
Landscape
[Beauty Shot] (
) : Take a photo of portraits by setting
options to clear facial imperfections.
[Frame Guide] (
) : Use this mode when you want someone
else to take a picture for you from the
angle you choose.
[Night]
(
) : Use this for shooting still images at night
or in other dark conditions.
[Portrait]
(
) : To take a picture of a person.
[Children]
(
) : To take a picture of fast moving
objects, for example: children.
Set
[Landscape]
(
) : To take pictures of distant scenery.
[Close Up]
(
) : Close-up shooting for small objects such
as plants and insects.
[Text]
(
) : Use this mode to shoot a document.
[Sunset]
(
) : For taking pictures of sunsets.
[Dawn]
(
) : Daybreak scenes.
[Backlight]
(
) : P
ortrait without shadows caused by backlight.
[Fireworks]
(
) : Firework scenes.
[Beach&Snow] (
) : For ocean, lake, beach and snowscape
scenes.
025
Starting the recording mode
Ê How to use the [Frame Guide] mode
How to use the Movie mode (
Set [Frame Guide] mode when you want someone else to take a
picture for you from the angle you choose.
A movie clip can be recorded for as long as the available recording
time of the memory capacity allows. (Max.2 hours)
1. Take a picture from the angle you
choose.
- A guide appears around the sides
of the picture.
Frame Guide: Shutter
2. Then another person can take the
picture by aligning the edge of the
picture to be taken with the guide
framing the sides of the window.
Guide
Cancel Frame: OK
Cancel Frame: OK
026
)
1. Select the Movie mode by using the
MENU button. (p.21)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the shutter button once and
movie clips are recorded for as long as
the available recording time (Max.2 hours) allows. Movie clips
will still be recorded if the shutter button is released. If you wish
to stop recording, press the shutter button again.
Ä Movie clip size and type are listed below.
- Movie clip size
: 640x480, 320x240 (selectable)
- Movie clip file type : AVI (MJPEG)
- Frame Rate
: 30 FPS, 15 FPS (selectable)
Starting the recording mode
Recording the movie clip without sound
Pausing while recording a movie clip (Successive Recording)
You can record the movie clip without sound.
This camera allows you to temporarily stop during unwanted
scenes while recording a movie clip. Using this function, you can
record your favorite scenes into a movie clip without having to
create multiple movie clips.
Steps from 1-3 are the same as those for Movie mode.
4. Press the MENU button.
5. Press the Up / Down button to select
the [Movie] menu and press the Right
button.
6. Select the [Voice] menu by pressing
the Up / Down button and press the OK
button.
7. Select the [Off] menu by pressing the Left / Right button.
8. Press the OK button. You can record a movie without sound.
Ä See p.49 for further details.
Ê Using Successive Recording
Steps from 1-2 are the same as those for Movie mode.
3. Press the shutter button and movie
clips are recorded for as long as the
available recording time. (Max.2 hours)
Movie clips will still be recorded if the
shutter button is released.
4. Press the OK button to pause
Stop
Pause
recording.
5. Press the OK button again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
027
Things to watch out for when taking pictures
å Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery
charge. Press the shutter button all way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
å The available memory capacity may vary depending on shooting
conditions and camera settings.
å When the Flash Off, Slow synchro mode or DIS mode is selected
in a low lighting condition, the camera shake warning indicator
( \ ) may appear on the LCD monitor. In this case use a tripod
to support the camera on a solid surface or change to flash shot
mode.
å Shooting
against the light : It is best to take pictures with the sun
behind you. Taking pictures against the
sun may make the picture come out dark.
To take a picture against the light, please
use the [Backlight] in scene shooting mode
(p.25), fill-in flash (p.33), spot metering
(p.44), exposure compensation (p.39) or
ACB (p.47) function.
å Avoid obstructing the lens or the flash when you capture an image.
028
å Compose the image by using the LCD monitor.
å Under certain conditions the auto focus system may not perform
as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is
very bright.
- When the subject matter has only horizontal lines or the subject
is very narrow (such as a stick or flagpole).
- When the surroundings are dark.
Using the camera buttons to set the camera
ZOOM button
The recording mode function can be set up by using the camera buttons.
If the menu is not displayed, this button
works as the OPTICAL ZOOM or
DIGITAL ZOOM button.
This camera has a 5X optical zoom and
a 3X digital zoom function. Using both
will offer a total zoom ratio of 15X.
POWER button
Used for turning the camera’s power
on / off. If there is no operation during
the specified time, the camera's power
will be turned off automatically to save
battery life. Refer to p.55 for more
information about the auto power off
function.
SHUTTER button
Used for taking an image or recording a movie clip in the Recording
mode.
å In Movie mode
Pressing the shutter button down
fully starts the process for recording
a movie clip. Press the shutter
button once and the movie clip is
recorded for as long as the available
recording time on the memory
allows. If you wish to stop recording,
press the shutter button again.
å In Still image mode
Pressing the shutter button down halfway activates the autofocus
and checks the condition of the flash. Pressing the shutter button
down fully takes and stores the image. If you select voice memo
recording, the recording will start after the camera has finished
storing the image data.
Ê TELE Zoom
Optical zoom TELE : P
ressing the ZOOM T button. This will zoom
into the subject i.e. the subject will appear
nearer.
Digital zoom TELE : W
hen the maximum (5X) optical zoom
is selected, pressing the ZOOM T button
activates the digital zoom software.
Releasing ZOOM T button stops the digital
zooming at the required setting. Once the
maximum digital zoom (3X) is achieved,
pressing the ZOOM T button will have no
effect.
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
[WIDE zoom]
[TELE zoom]
[Digital zoom 3.0X]
029
ZOOM button
Ê WIDE Zoom
Optical zoom WIDE : Pressing the ZOOM W button. This will
zoom out from the subject i.e. the subject
will appear further away. Pressing the
ZOOM W button continuously will set the
camera to its minimum zoom setting i.e.
the subject appears at its furthest from the
camera.
Pressing
the ZOOM
W button
[TELE zoom]
Pressing
the ZOOM
W button
[Optical zoom 2X]
Digital zoom WIDE Digital zoom
Optical zoom
: When the digital zoom is in operation,
pressing the ZOOM W button will reduce
the digital zooming in steps. Releasing
ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce
the digital zoom and then it will continue
to reduce the optical zoom until the minimum setting is reached.
Pressing
the ZOOM
W button
[Digital zoom 3.0X]
030
[WIDE zoom]
Pressing
the ZOOM
W button
[TELE zoom]
[WIDE zoom]
å Images taken using the digital zoom may take a little longer for the
camera to process. Allow time for this to take place.
å If the ZOOM buttons are being pressed during the Movie shots, the
voice will not be recorded.
å You may notice a decrease in image quality when using the digital
zoom.
å To view a clearer digital zoom image, press the shutter button
halfway at the maximum optical zoom position and press the
ZOOM T button again.
å The digital zoom can’t be activated in some Scene modes
([Beauty Shot], [Night], [Portrait], [Children], [Close up], [Text],
[Fireworks]), DIS mode, Movie mode, [Self-Portrait], [Smile Shot],
[Blink Detection] and [Face Detection].
å Take care not to touch the lens to avoid taking an unclear image
and possibly causing camera malfunction. If the image is dim, turn
the camera power off and on again to modify the lens position.
å Take care not to press the lens as this may cause the camera to
malfunction.
å When the camera is turned on, take care not to touch the camera’s
moving lens parts as this may cause the resulting image to be dim
and unclear.
å Take care not to touch the lens when operating the zoom button.
Info (DISP) / Up button
Macro (
While the menu is showing, the Up button operates as a direction
button. In the recording modes or playback mode, pressing this
button will display the image information.
While the menu is showing, the Down button operates as a direction
button.
When the menu is not showing, you can use the Macro ( ) / Down
button to take macro pictures.
The focus ranges are shown on the next page.
Press the Macro button until the desired macro mode indicator
appears on the LCD monitor.
Show all photographic information.
[Filming screen]
) / Down button
Show only basic information.
[Information screen]
[Auto Focus]
[Auto Macro (
[Macro (
)]
)]
031
Macro (
) / Down button
Ê Types of focus mode and focus range (W : Wide, T : Tele)
Mode
Program (
Focus Type
Macro (
Focus range
W : 5 ~ 80
T : 100 ~ 150
Mode
Focus Type
Focus range
(Unit: cm)
Mode
)
)
Ê Available focusing method, by recording mode
( o : Selectable, ä : Infinity focus range)
Auto macro
Normal
Auto macro (
W : 5 ~ Infinity
T : 100 ~ Infinity
)
)
Normal
W : 80 ~ Infinity
T : 100 ~ Infinity
Normal
o
o
o
W : 80 ~ Infinity
T : 100 ~ Infinity
DIS Mode (
Macro
Mode
o
o
o
o
o
SCENE
Auto macro
Macro
Normal
o
o
o
å When the macro mode is selected, be particularly careful to
o
avoid camera shake.
o
å When you take a picture within 40cm (Wide zoom) or 100cm
(Tele zoom) in the Macro mode, select the Flash off mode.
o
o
o
o
o
o
ä
o
032
Focus lock
Flash (
To focus on a subject not positioned in the center of the picture, use
the focus lock function.
When the menu is displayed on the LCD
monitor, pressing the Left button makes the
cursor shift to the left tab.
When the menu is not displayed on the
LCD monitor, the Left button operates as
the Flash ( ) button.
Ê Using the Focus Lock
1. Ensure the subject is in the center of the autofocus frame.
2. Press the shutter button halfway. When the green auto focus
frame lights up, it means the camera is focused on the subject.
Be careful not to press the shutter button all the way down to
avoid taking an unwanted picture.
3. With the shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press
the shutter button completely to take the picture. If you release
your finger from the shutter button, the focus lock function will be
cancelled.
) / Left button
[Selecting the Auto flash]
Ê Selecting the flash mode
1. Select a desired Recording mode, except the [Movie] mode and
the [DIS] mode. (p.21)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
(Unit: m)
Ê Flash range
ISO
1. The image to be
captured.
2. Press the shutter
button halfway and
focus on the subject.
3. Recompose the
picture and fully
depress the shutter
button.
AUTO
Normal
WIDE
TELE
0.8~2.68 0.8~1.59
Macro
WIDE
TELE
0.2~0.8
0.5~0.8
Auto macro
WIDE
TELE
0.2~2.68 0.5~1.59
033
Flash (
) / Left button
å If you press the shutter button after selecting the flash, the first
flash fires to check the shooting condition (Flash range and Power
ratio of flash). Do not move the camera until the second flash
fires.
å Using the flash frequently will reduce the life of the battery.
å Under normal operating conditions the recharging time for the
flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
the DIS mode, [Landscape], [Close up], [Text], [Sunset], [Dawn],
å In
[Fireworks] scene modes and the Movie mode, the flash
function will not operate.
å Take photographs within the flash range.
å The image quality is not guaranteed if the subject is too close or
highly reflective.
å When taking an image in poorly lit conditions with the flash, there
may be a white speck in the captured image. The speck is caused
by the flash light reflecting off atmospheric dust.
Ê Flash mode indicator
Icon
Flash mode
Description
Flash off
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image
in poorly lit conditions, the camera shake
warning indicator ( \ ) will appear on the
LCD monitor.
When a shot with "red eye" is detected,
Red-eye reduction this mode will reduce the red-eye effect
automatically.
Slow synchro
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In poor
lighting conditions the camera shake warning
indicator ( \ ) will display on the LCD
monitor.
Fill in flash
The flash fires regardless of the available
light. The intensity of the flash will be
automatically controlled to suit the prevailing
conditions.
Auto & Red eye
reduction
If a subject or background is dark, the
camera flash will work automatically and will
reduce the red-eye effect by using the
red-eye reduction function.
Auto flash
034
If the subject or background is dark, the
camera flash will operate automatically.
Flash (
Self-timer (
) / Left button
Ê Available flash mode, by recording mode ( o : Selectable)
Mode
o
o
o
o
o
o
o
o
o
o
o
o
o
o
SCENE
Mode
o
o
o
o
o
o
o
o
o
o
o
o
o
) / Right button
When the menu is displayed on the LCD monitor, pressing the Right
button makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the Right
button operates as the Self-timer ( ) button. This function is used
when the photographer would also like to be in the image.
å If you operate the self-timer button during the self-timer
operation, the self-timer function is cancelled.
å Use a tripod to prevent the camera from shaking.
å In Movie mode, only the 10 Sec self-timer will work.
å Depending on the selected face detection option, the timer is
not available or some timer options are not available.
o
o
o
o
o
o
o
o
o
å Smart Auto Flash (
) icon will appear in [Smart Auto] mode.
035
Self-timer (
) / Right button
Ê Selecting the self-timer
1. Select a Recording mode with the
exception of Voice recording mode.(p.21)
2. Press the Self-timer / Right ( )
button until the desired mode indicator
displays on the LCD monitor. A 10 second,
2 second, Double self-timer or Motion timer
icon appears on the LCD monitor.
3. When you press the shutter button, the
picture will be taken after the specified
time has elapsed.
Ê Motion Timer
Motion
Pressing the Shuter button after
setting the Motion Timer
Ê Self-timer mode indicator
Mode
Description
10 Sec Pressing the shutter button will allow an interval of
self-timer 10 seconds before the image is taken.
2 Sec Pressing the shutter button will allow an interval of
self-timer 2 seconds before the image is taken.
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Double
When using the flash, the 2-second
self-timer
self-timer may be delayed for longer than 2 seconds depending on the flash charging time.
The camera detects the subject's movement 6
Motion
seconds after pressing the Shutter button, and the
Timer
picture is taken when the movement is stopped.
036
Blink (1 second interval)
Detecting the subject's movement
Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken
after 2 seconds
Ê The Motion Timer flows are as followings. (Movie mode excluded)
[Selecting the 10 SEC
self-timer]
Icon
Icon & Self-timer lamp
Selecting the Motion Timer à Pressing the Shutter button Ã
Confirming the composition (Within 6 sec.)*1 Ã Starting the detection (Swing your hands fully)*2 Ã Stopping the detection
(Do not move) Ã Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the
Shtter button, so confirm the composition within 6 seconds.
*2: M
ove your body or hands fully.
In the following cases, the Motion Timer may not operate.
å The focus distance is over 3m.
å The exposure is too bright or too dark.
å In backlight conditions.
å The movement is insignificant.
å The movement is detected
beyond the center part (50%) of
the sensor where the movement
is recognized.
å If the camera doesn't sense any
movement for 30 seconds, or the
camera doesn’t sense stillness
after sensing movement.
The detection range of
Motion Timer
MENU button
Shooting (
- When you press the MENU button, a menu related to each
camera mode will be displayed on the LCD monitor. Pressing it
again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
Movie and Still image mode. There is no menu available when
the voice recording function is selected.
DIS
Sound
Photo Help...
Display
Scene
Movie
Settings
Exit
Change
[Menu on]
(Shooting)
OK button
- W
hen the menu is displayed on the LCD monitor, this button is
used for shifting the cursor to the sub menu or for confirming data.
Mode
Smart Auto
Program
Smart Auto
[Pressing the
OK button]
Program
Shooting
DIS
Sound
Photo Help...
Display
Scene
Scene
Movie
Movie
Settings
Exit
Mode
Program
Shooting
[Menu off]
Use the menu that enables the functions, or the Fn button to bring up
the menus below:
Change
DIS
Photo Help Guide
Exit
Menu
Available mode
Page
Photo Size / Movie Size
p.38
Quality / Frame Rate
p.39
Smart Auto
Mode
[Pressing the MENU button]
)
EV
p.39
ISO
p.40
White Balance
p.40
Face Detection
p.41
Face Tone
p.43
Face Retouch
p.43
Focus Area
p.44
Metering
p.44
Photo Style Selector
p.45
Image Adjust
p.46
ACB
p.47
Drive
p.47
Voice
p.48~49
Back
037
Shooting (
)
How to enable functions using the MENU button
1. Press the MENU button in an available mode.
2. Press the Up / Down button to select the [Shooting] menu and
press the Right/OK button.
Photo Size
Photo Size
Quality
Shooting
Quality
EV
EV
Sound
ISO
ISO
Display
White Balance
Mode
Face Detection
Settings
Right/OK
button
Exit
Face Detection
Focus Area
Exit
Change
Back
3. Select a desired menu by pressing the Up / Down button and
then press the OK button.
Photo Size
Photo Size
Quality
Quality
EV
EV
Up / Down
button
ISO
White Balance
Face Detection
Face Detection
Exit
Back
038
Move
Left / Right
button
Icon
640 x 480
Size
320 x 240
Appropriate for outdoor photography on a clear day.
Daylight
Back
Movie Size
Set the video size.
Photo Size
Set the photo size.
Back
4. Select a desired menu by pressing the Left / Right button and
then press the OK button.
Adjust the white balance according to the light source.
White Balance
Movie
mode
3648X 3648X 3584X 3072X 2560X 2048X 1024X
2736
2432
2016
2304
1920
1536
768
White Balance
Focus Area
Back
Still Icon
image
mode Size
ISO
Focus Area
Exit
Photo Size / Movie Size
You can select the photo size / movie size appropriate for your
application.
(Unit: pixel)
White Balance
Focus Area
Use the Fn button on the rear of the camera to bring up the menus
that enable frequently used functions faster.
Move
Back
Move
[ Still image mode ]
Back
Move
[ Movie mode ]
å The higher the resolution, the lower the number of shots
available because high resolution images require more memory.
Shooting (
)
Quality / Frame rate
Exposure compensation
You can select the compression ratio appropriate for your application
of the captured images. The higher the compression ratio, the lower
the picture quality.
This camera automatically adjusts the exposure according to the
ambient lighting conditions.
You can also select the exposure value by using the [EV] menu.
Mode
STILL IMAGE mode
MOVIE mode
Icon
Sub menu Super Fine
File
Format
jpeg
Fine
Normal
30 FPS
15 FPS
jpeg
jpeg
avi
avi
Quality
Adjust the image quality.
Back
Frame Rate
Set the number of frames per second for movies.
Move
[ Still image mode ]
Back
Move
[ Movie mode ]
Ê Compensating Exposure
1. Click the Up/Down button from the
Shooting menu to select [EV] (
).
2. Use the Left and Right buttons to
EV
Set exposure value to adjust brightness.
set the desired exposure compensation
factor.
3. Press the OK button. The value you
Back
Move
set will be saved and the Exposure
Compensation setup mode will be closed. If you change the
exposure value, the exposure indicator (
) will be displayed
on the left of the LCD monitor.
Ä A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not
get good pictures.
file format complies with the DCF (Design rule for Camera
å This
File system).
(Joint Photographic Experts Group) :
å JPEG
JPEG is the image compression standard developed by the Joint
Photographic Experts Group. This type of compression is most
commonly used for compressing photos and graphics because it
can compress the files efficiently.
039
Shooting (
)
ISO
White balance
You can select the ISO sensitivity when taking pictures.The speed or
specific light-sensitivity of a camera is rated by ISO numbers.
The white balance control allows you to
adjust the colors to appear more natural.
[Auto] : The camera's sensitivity is
automatically changed by
variables such as lighting value
or subject brightness.
Back
ISO
Adjust the sensitivity of the camera.
[ISO 80, 100, 200, 400, 800, 1600] :
Back
Move
You can increase the shutter speed while
the same amount of light is present, by
increasing the ISO sensitivity. However, the
image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to
light and therefore the greater its capacity to take pictures in dark
conditions. However, the noise level in the image will increase as
the ISO value increases, making the image appear coarse.
Ä When [Motion Capture] is set, ISO speed will be set to Auto.
Ä [ISO] is enabled only in [Program] or [Photo Help Guide] mode.
Adjust the white balance according to the light source.
White Balance
Mode
Icon
Move
Description
Auto WB
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
Daylight
For taking images outside.
Cloudy
For taking images under a cloudy and overcast sky.
Fluorescent_H
For shooting under daylight fluorescent types
of three-way fluorescent lighting.
Fluorescent_L
Shooting under white fluorescent lighting.
Tungsten
For shooting under tungsten (standard light
bulb) lighting.
Custom Set
Allows the user to set the white balance according to the shooting condition.
ÄD
ifferent lighting conditions may cause a color cast on your images.
040
Shooting (
)
Face Detection
Ê Using the Custom White Balance
hite balance settings may vary slightly depending on the
W
shooting environment. You can select the most appropriate
white balance setting for a given shooting environment by setting
up the custom white balance.
1. Select the Custom (
) menu of the
White Balance and place a sheet of
white paper in front of the camera
so that the LCD monitor shows only
white. 2. OK button
: Selects previous
custom white balance.
Shutter button: saves new custom white balance.
If you use face detection options, your
camera can detect a human face. When
focusing on a human face, the brightness
of the face is also adjusted. You can also
capture natural facial expressions by using
self portrait.
Adjust face detection settings.
Face Detection
Back
Move
Ê Normal
White paper
- The custom white balance value will be applied, starting with
the next picture you take.
- The user configured white balance will be remain effective until
it is overwritten.
This mode detects the face position of the subject automatically and
then sets the focus and exposure. Select this mode for quick and
easy face picture.
Ä Selectable modes: Program, DIS, Photo Help Guide, Beauty Shot,
Portrait, Children, Beach & Snow
1. The size and position of the auto
focus frame is set at the face of the
subject automatically.
2. Press the shutter button halfway.
The focus frame turns to green when
the focus is activated.
3. Press the shutter button fully to take a
picture.
041
Shooting (
)
å This function can detect up to 10 persons.
å When the camera recognizes many people at the same time,
it will focus on the nearest person.
å The Digital zoom is not activated in this mode.
å When the camera detects a target face, the white color focus
frame will be displayed over the target face and the grey
color focus frame appears over the remaining faces.
Press the shutter button halfway down to focus on the face
and the white focus frame turns green.
å Return to previous AF mode if face detection was failure.
å In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the face
is hidden.
- When the person being taken does not look at the camera.
- Camera doesn't detect a face as the brightness is too dark
or too bright.
- The distance between the camera and object is far.
å The maximum available Face Detection range is 2.5m (Wide).
å The nearer the subject, the faster the camera can recognize
the subject.
å In [Beauty Shot], [Portrait], and [Children] mode, the
[Face Detection] function setting is set to its default value.
042
Ê Self Portrait
hen taking pictures of yourself, the area of your face is automatically
W
detected so that you can take self pictures more easily and quickly.
Ä Selectable modes: Program, DIS, Photo Help Guide,
Beauty Shot, Portrait, Beach & Snow
1. For self-filming, set the camera lens
towards the face of the object. It
automatically detects the face of the
object, and emits a guiding sound.
2. Start filming by pressing the shutter
button.
å When locating the face in the center of the screen, it
repeatedly emits a faster sound unlike the sounds that are
emitted when the face is not in the center.
Shooting (
)
Ê Smile Shot
※Selectable modes: Program, DIS,
Photo Help Guide, Beauty shot, Portrait,
Children, Beach & Snow
The camera automatically takes a picture by
detecting the face of the subject although
you don’t press the Shutter button.
If you press the Shutter button, the picture is
taken in the normal way. When taking a picture of smile shot, showing
teeth or keeping the smiley face of your subject helps detecting the
smile face of the subject.
Ê Blink Detection
※Selectable modes: Program, Photo Help
Guide, Portrait, Children, Beach & Snow
If the eyes of the subject are closed when
the shutter button is pressed, the camera
takes 2 continuous shots and then the
images are saved. The camera takes only
one picture if the eyes of the subject are
open when the Shutter button is pressed.
å Detecting the smiling face or the blinking eyes may not be
available if any of the following situations occurs:
- If the subject is wearing sunglasses.
- When the subject is not facing directly to the camera.
- If the environmental light is too bright or too dark to detect the
face of the subject.
- When the camera is far from the subject. (Orange colored
focusing mark)
- If there is reflection of the light or the backlight that are too
bright.
Face Tone
This menu allows you to control the skin tone in images in beauty shot
mode. The higher the level you select, the brighter the skin tone.
1. Select [Face Tone] by pressing the
Up/Down button.
2. Select a desired face tone by pressing
the Left / Right button and then press
the OK button.
3. Press the Shutter button to take an
image.
Face Tone
Set the level of face tone. (brightening the face)
Back
Move
Face Retouch
This menu allows you to make skin appear clear and beautiful before
recording in beauty shot mode. The higher the level selected, the
more effective the control.
1. Select [Face Retouch] by pressing the
Up/Down button.
2. Select a desired face retouch by
pressing the Left / Right button and
then press the OK button.
3. Press the Shutter button to take an
image.
Face Retouch
Set the level of face retouching.
Back
Move
043
Shooting (
)
Auto Focus type
Metering
You can select your preferred Focus Area according to the shooting
conditions.
If you cannot obtain suitable exposure conditions, you can change
the metering method to take brighter pictures.
[Center AF] (
[Multi AF] (
): The rectangular area in
the center of the LCD
monitor will be focused
) : This camera selects all
of available AF point
from the 9 AF points.
[Multi] (
Set the autofocus method.
Focus Area
Back
Move
ÄW
hen the camera focuses on the subject, the auto focus frame
turns to green. When the camera doesn't focus on the subject, the
auto focus frame turns to red.
) : Exposure will be calculated
Metering
based on an average of
Set the light metering option.
the available light in the
image area. However, the
calculation will be biased
towards the center of the
Back
Move
image area. This is suitable
for general use.
[Spot] ( ) : Only the rectangular area in the center of the LCD
monitor will be metered for light. This is suitable
when the subject in the center is exposed correctly,
regardless of the back lighting.
[Center-weighted] ( ) : Exposure will be calculated based on an
average of the available light in the image
area. However, the calculation will be
biased towards the center of the image
area. This is suitable for taking a picture of
small object like a flower or insects.
Ä If the subject is not the center of the focus area, do not use the
spot metering as this may result in an exposure error. In this
circumstance, it is better to use exposure compensation.
044
Shooting (
)
Photo Style Selector
You can add various effects to the image
without using image editing software.
Photo Style Selector
Set a photo style to evoke a mood.
Back
Move
1. S
elect the desired Photo style selector by pressing the Left/Right
button and press the OK button.
Ê Custom RGB : You can change the R
(Red), G (Green) and
B (Blue) values of the
image.
Back
Move
Back
Move
- Up/Down button : Selects R, G, B
- Left/Right button : C
hanges the values
2. P
ress the Shutter button to take an image.
Style mode
Normal
Icon
Description
No style effect is applied.
Soft
Soft style is applied.
Vivid
Vivid style is applied.
Forest
Forest style is applied.
Retro
Sepia style is applied.
Cool
Cool style is applied.
Calm
Calm style is applied.
Classic
Negative
Custom RGB
å When picture style is set, face detection is not available.
å When Photo Style Selector is set, Image Adjust function is not
available.
Black & white effect is applied.
Negative effect is applied.
Define an RGB tone to create your own photo
style.
045
Shooting (
)
Image Adjust
Ê Saturation
You can change the saturation of the image.
Ê Contrast
You can change the contrast of the image.
1. Select [Saturation] by pressing the
Up/Down button.
2. Change the saturation by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
1. Select [Contrast] by pressing the
Up/Down button.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
Contrast
Sharpness
Saturation
Contrast
Use normal contrast (default)
Back
Move
Contrast
Sharpness
Saturation
Saturation
Use normal color saturation (default)
Back
å When Image Adjust is set, Photo Style Selector function is not
available.
å When Saturation is set, Face Detection is not available.
Ê Sharpness
You can adjust the sharpness of the
picture you are about to take.
You cannot check the sharpness effect
on the LCD monitor before you take a
picture, because this function is applied
only when the captured image is stored
on the memory.
Contrast
Sharpness
Saturation
Sharpness
Use normal sharpness (default)
Back
1. S
elect [Sharpness] by pressing the Up/Down button.
2. C
hange the Sharpness by pressing the Left/Right button.
3. P
ress the Shutter button to take an image.
046
Move
Move
Shooting (
)
ACB
Drive mode
This function is to adjust the contrast automatically when taking
photos in an environment with big exposure difference i.e. backlight
or contrast. This function adjusts the brightness automatically and
allows the subject to be photographed clearly.
You can select continuous shot, and AEB (Auto Exposure Bracketing).
- [ACB] Sub menus: [Off], [On]
ACB
Auto Contrast Balance automatically compensates for
brightness differences.
Back
Ä The ACB function is available in [Program], [Portrait] or
[Photo Help Guide] recording mode. ACB function always
operates in the [Portrait] recording mode.
Move
[Single] (
)
[Continuous] (
: Take one picture only.
): Images will be taken
Set the shooting type.
continuously until
Drive
the shutter button is
released.
[Motion Capture] (
)
Back
Move
: This takes 6 shots per
second, when the shutter is pressed and
held down. After completing the continuous
shooting, images are saved and the images
play back on the Rear LCD.
The maximum number of shots is 30 and the
image size is fixed as VGA.
[AEB] (
)
: Take three consecutive photos with varying
exposure values. Use this mode if it is hard to
decide exposure of the object.
resolution and picture quality increases file saving time,
å High
which increases stand-by time.
å If the [Continuous], [Motion Capture], [AEB] sub menu is
selected, the flash will be off automatically.
å If less than 3 pictures are available on the memory, the AEB
shooting is not available.
å If less than 30 pictures are available on the memory, the motion
capture is not available.
å It is best to use a tripod for the AEB shooting as the time to save
each image file is longer and blurring caused by camera shake
may occur.
047
Shooting (
)
Voice Memo
Voice Recording
You can add your voice-over to a stored
still image. (Max. 10 sec.)
A voice can be recorded for as long as the
available recording time (Max. 10 hours)
allows.
Set the voice memo feature.
Memo
Back
Move
- If the voice memo indicator is
displayed on the LCD monitor, the
setting is completed.
Back
Move
Press the shutter button to record a voice.
- Press the shutter button once and voice
is recorded for as long as the available
recording time (Max.10 hours) allows.
The recording time will be displayed
on the LCD monitor. Voice will still be
recorded if the Shutter button is released.
- Press the Shutter button and take a
picture. The picture is stored on the
memory card.
- Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the shutter button
will stop the voice memo.
- If you wish to stop recording, press the
Shutter button again.
- File type : *.wav
Stop
048
Enable voice recording.
Record
Record
Exit
[Voice recording mode]
Shooting (
)
Ê Pausing while recording a voice
Recording the movie clip without voice
sing this function, you can record your
U
favorite voice clips into a voice recording
file without having to create multiple voice
recording files.
You can record the movie without voice.
Stop
Pause
[Voice recording mode]
1. Press the OK button to pause recording.
2. Press the OK button again to resume the recording.
3. If you wish to stop recording, press the Shutter button again.
Select [Off] of [Voice] menu in the Movie
mode. (
) icon will appear on the LCD
monitor. Press the Shutter button and
a movie will record for as long as the
memory capacity allows without voice.
Record a video without audio.
Off
Back
Move
å A distance of 40cm between you and the camera (microphone) is
the best distance to record sound.
å If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
049
Sound ( # )
Ê The items indicated by * are default settings.
ÄM
enus are subject to change without prior notice.
Shutter sound
Volume
- Shutter sound : [Off], [1]*, [2], [3]
You can select the shutter sound.
- [Volume] sub menus : [Off], [Low],
[Medium]*, [High]
Volume
Off :Medium
Start Sound
Low :Off
Shutter Sound
Medium
:1
High
:1
Beep Sound
AF Sound
Back
Set
Volume
:Medium
Start Sound
Off :Off
Shutter Sound
1
Beep Sound
2
Beep Sound
1
:1
AF Sound
2
:On
Back
050
3
Set
3
If you set sound to ON, a beep will sound when buttons are pressed,
letting you know the camera operation status.
- [Beep Sound] sub menus : [Off], [1]*, [2], [3]
Volume
Set
:Medium
Start Sound
:Off
Shutter Sound
:1
Off :1
Beep Sound
1
:1
:1
AF Sound
2
:On
:On
Back
Back
:Off
Off :1
Beep sound
You can select the sound that is activated whenever the camera is
turned on.
AF Sound
:Medium
Shutter Sound
:On
Start up sound
- Start up sound : [Off]*, [1], [2], [3]
Volume
Start Sound
You can select a volume of start up sound, shutter sound, beep
sound and AF sound.
3
Set
Sound ( # )
Display (
AF sound
Ê The items indicated by * are default settings.
Ä Menus are subject to change without prior notice.
If you set AF sound to on, AF sound will be activated when the
Shutter button is pressed down half way so that you can be aware
of the camera operation status.
- [AF sound] sub menus : [Off], [On]*
Volume
:Medium
Start Sound
:Off
Shutter Sound
:1
Beep Sound
AF Sound
)
Language
There is a choice of language that can be
displayed on the LCD monitor. Even if the
battery is removed and inserted again, the
language setting will be preserved.
:1
Function Description
Start Image
Display Brightness
Quick View
Power Save
:English
English
:On
한국어
:Off
Français
Deutsch
:Auto
Español
:0.5sec
Italiano
:Off
Off :On
On
Back
Language
Back
Set
Set
Function Description
You can select whether the function description can be displayed on
the window in recording mode.
- Function Description sub menus
[Off] : The function description
function can’t be activated.
[On]*: The name and description of the
option is displayed.
Language
Function Description
Start Image
:English
Off
On
:On
:Off
Display Brightness
:Auto
Quick View
:0.5sec
Power Save
:Off
Back
Set
051
Display (
)
Start up image
Quick View
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus : [Off]*, [Logo], [User Image]
- Use a saved image for the start-up image
with the [Start Image] in the [Resize]
menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The user images will be deleted by [Reset]
menu.
Language
:English
Function Description
Start Image
Display Brightness
:On
:Off
OFF:Auto
Quick View
:0.5sec
Power Save
:Off
Back
Set
- Sub menus
[Off]
: The quick view function can’t
be activated.
[0.5 sec]*,[1 sec], [3 sec]
: The captured image is briefly
displayed during the selected
time.
Language
:English
Function Description
:On
Start Image
:Off
Display Brightness
Off :Auto
Quick View
0.5sec
:0.5sec
1sec:Off
Power Save
Back
3sec
Set
Display Brightness
Display Save
You can adjust the LCD brightness.
If you set the [Power Save] to On and the camera isn't operated
during the specified time, the LCD monitor will be turned off
automatically.
- Sub menus : [Auto]*, [Dark],
[Normal], [Bright]
Language
:English
Function Description
:On
Start Image
:Off
Display Brightness
Auto:Auto
Quick View
Dark:0.5sec
Normal
:Off
Power Save
Back
Bright
Set
- Sub menus
[Off]*: The LCD monitor will not be turned
off.
[On] : If the camera isn't operated during
the specified time (about 30 SEC.),
the camera power will be idle
(Camera status lamp:Blinking)
automatically.
Language
:On
Start Image
:Off
Display Brightness
:Auto
Quick View
Power Save
Back
Ä You can’t set the [Power Save] menu of Playback Mode.
052
:English
Function Description
Off
On
Set
:0.5sec
:Off
Settings (
)
Initialization
Ê The items indicated by * are default settings.
ÄM
enus are subject to change without prior notice.
All camera menu and function settings will be restored to their
default values. However, values for Date & Time, Language and
Video Out will not be changed.
Formatting the memory
This is used for formatting the memory. If you run [Format] on the
memory, all images, including the protected images will be deleted.
Be sure to download important images to your PC before formatting
the memory.
- Sub menus
[Yes] : A window for confirming the
selection displays. Select the
[Yes] menu. A [Formatting]
message appears and the
memory will be formatted.
A [Format is completed] message
appears and formatting is finished.
[No]* : The memory will not be formatted.
Format
Reset
Date & Time Yes
No
Time Zone
:10/01/01
:London
File No. Format
Reset
Date & Time Yes
No
:Off
Time Zone
:London
File No. :Series
Imprint :Off
Auto Power Off
Back
:3 min
Set
:Series
Imprint :Off
Auto Power Off
:3 min
Back
- Sub menus
[Yes]: A window to confirm the
selection will be displayed.
Select the [Yes] menu and
all settings will be restored
to their defaults.
[No]*: S
ettings will not be restored to
their defaults.
Set
Ê Be sure to run [Format] on the following types of memory card.
- A new memory card or an unformatted memory card.
- A memory card that has a file this camera can't recognize or one
that has been taken from another camera.
- Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras,
memory card readers or PCs you will get a [Card Error]
message.
053
Settings (
)
Setting up the Date / Time / Date type
File name
You can change the date and time that will be displayed on the
captured images and set up the date type. Setting [Time Zone]
enables you to display the local date and time on the LCD monitor
when travelling overseas.
This function allows the user to select the file naming format.
- Date type : [yyyy/mm/dd], [mm/dd/yyyy],
[dd/mm/yyyy], [Off]*
Format
Reset
Date & Time :10/01/01
yyyy mm dd
Time Zone
:London
2010
File No.
/ 01 / 01 12:00
Imprint :Off
Auto Power Off
Back
Off
:Series
:3 min
Set
Time Zone
Ê Available cities:
London, Cape Verde, Mid-Atlantic,
Time Zone
Buenos Aires, Sao Paulo, Newfoundland,
Caracas, La Paz, NewYork, Miami,
Chicago, Dallas, Denver, Phoenix, LA,
London
San Francisco, Alaska, Honolulu, Hawaii,
[GMT +00:00] 2010/01/01 12:00 PM
Samoa, Midway, Wellington, Auckland,
Back
DST
Okhotsk, Guam, Sydney, Darwin,
Adelaide, Seoul, Tokyo, Beijing, Hong Kong, Bankok, Jakarta,
Yangon, Almaty, Kathmandu, Mumbai, New Delhi, Tashkent,
Kabul, Abu Dhabi, Teheran, Moscow, Athens, Helsinki, Rome,
Paris, Berlin
Ä DST : Daylight Saving Time
054
[Reset] : After using the reset function,
the next file name will be set
from 0001 even after formatting,
deleting all or inserting a new
memory card.
Format
Reset
Date & Time :10/01/01
Time Zone
:London
File No. Imprint Auto Power Off
:Series
Reset
:Off
Series
:3 min
Back
Set
[Series]*: New files are named using numbers that follow the previous sequence, even when a new
memory card is used, or after formatting, or after deleting
all pictures.
- The first stored folder name is 100PHOTO, and the first file name
is SAM_0001.
- File names are assigned sequentially from SAM_0001 Ã
SAM_0002 Ã ~ Ã SAM_9999.
- The folder number is assigned sequentially from 100 to 999 as
follows: 100PHOTO Ã 101PHOTO Ã ~ Ã 999PHOTO.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design
rule for Camera File systems) format. If you change the image file
name, the image may not play back.
Settings (
)
Imprinting the recording date
Auto power off
There is an option to include Date&Time on still images.
This function switches the camera off after a set amount of time in
order to prevent unnecessary battery drainage.
- Sub menus
[Off]*
: The Date&Time will not
be imprinted on the image
file.
[Date]
: Only the Date will be
imprinted on the image
file.
[Date & Time] : The Date&Time will be
imprinted on the image file.
Format
Reset
Date & Time Time Zone
File No. Imprint Auto Power Off
Back
:10/01/01
Off
:London
:Series
Date
:Off
Date & Time
:3 min
Set
Ä The Date & Time are imprinted at the bottom right side of the still
image.
Ä The imprint function is applied only to still images.
ÄD
epending on the manufacturer and print mode, the date printed
on an image may not be printed correctly.
- Sub menus
[Off]
: The power off function will not
operate.
[1 min], [3 min]*, [5 min], [10 min]
: The power will turn off
automatically if not used for the
period of time specified.
Format
Reset
Date & Time Off
:Off
Time Zone
1 min:London
File No. 3 min:Series
Imprint Auto Power Off
Back
5 min:Off
10 min
:3 min
Set
- A
fter replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a
voice recording and playing back a movie clip.
055
Settings (
)
Auto Focus lamp
Selecting Video out type
You can turn on and off the Auto Focus lamp.
The Video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device
(monitor or TV, etc.) to which the camera is connected. PAL
mode can support only BDGHI.
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On]*: The AF lamp will light up in low
light conditions.
AF Lamp
Video Out
USB Back
:NTSC
Off
On :On
:Auto
Set
Ê Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor.
AF Lamp
Video Out USB Back
Yellow - Video
White - Sound
056
:On
:On
NTSC
:Auto
PAL
Set
Settings (
)
- NTSC: U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland,
Germany, U.K., Holland, Italy, Kuwait, Malaysia,
New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway etc.
- When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
- There will be digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the center of the screen, use the TV controls
to center it.
- When the camera is connected to an external monitor, some parts
of the image may not be displayed.
- When the camera is connected to an external monitor, the menu
will be visible on the external monitor and the menu functions are
the same as those indicated on the LCD monitor.
Setting the USB
If the camera fails to automatically connect with a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].
-[USB] sub menus:
[Auto]*
: Automatically enables an
AF Lamp
:On
Video Out
:NTSC
external device connected with
USB :Auto
Auto
a USB cable.
Computer
Printer
[Computer]: Sets computer connection
mode if the connected external
Back
Set
device cannot be recognized
automatically.
[Printer] : Sets printer connection mode if the connected external
device cannot be recognized automatically.
057
Starting play mode
Turn the camera on and select Play mode by pressing the play mode
button ( g ). The camera can now play back the images stored on
the memory. If the memory card is inserted in the camera, all the
camera functions apply only to the memory card.
If the memory card is not inserted in the camera, all the camera
functions apply only to the internal memory.
Ê Manner mode
To select the Manner mode, press the Play mode button for more
than 5 seconds. In the Manner mode, Operating sound, Effect
sound, Start-up sound and Shutter sound will not be generated.
To cancel the Manner mode turn on the camera by pressing the
POWER button.
Playing back a still image
1. Select the Play mode by pressing
the play mode button ( g ).
2. The last image stored on the
memory is displayed on the LCD
monitor.
3. Select an image that you want to
view by pressing the Left / Right
button.
Ä Press and hold the Left or Right
button to play back the images
quickly.
058
Playing back a movie clip
1. Select the recorded movie clip that you
want to play back by using the Left /
Right button.
2. Press the OK button to play back a movie
clip file.
Play
Capture
- To pause a movie clip file while playing
it back, press the OK button again.
- Pressing the OK button again will cause the movie clip file to
restart.
- To rewind the movie clip while it is playing, press the Left button.
To fast forward the movie clip, press the Right button.
- To stop playback of the movie clip, press the OK button, and
then press the Left or Right button.
Starting play mode
Movie clip capture function
Playing back a recorded voice
You can capture still images from the movie clip.
1. Select the recorded voice that you want
to play back by using the Left / Right
button.
2. Press the OK button to play back a
recorded voice file.
Play
- To pause a recorded voice file, while
playing it back, press the OK button again.
- To resume playback of the voice file, press the OK button.
- To rewind the voice file while it is playing, press the Left button.
To fast forward the voice file, press the Right button.
- To stop playback of the voice memo, press the Down button.
Ê How to capture the movie clip
1. Press the OK button while playing the
movie clip. Then press the Down button.
2. The paused movie clip is saved as a
new file name.
Ä T
he captured movie clip file is the
same size as the original movie clip
(640x480, 320x240).
Ä When you press the down button at
the beginning of the movie clip, the
first frame of the movie clip will be
saved as a still image.
Play
Capture
[Paused]
Playing back a voice memo
1. Select a still image that has the voice
memo.
2. Press the OK button to play back the
voice memo.
- To pause the voice memo, while
playing it back, press the OK button
again.
- To resume playback of the voice memo,
press the OK button.
Play
Pause
059
LCD monitor Indicator
The LCD monitor displays shooting information about the displayed
image.
060
No.
Description
Icon
Page
1
Playback mode
g
p.58
2
Voice Memo
p.74
3
DPOF
p.75
4
Protect
5
Folder name & File name
p.73
6
Memory indicator
-
7
Battery
p.15
100-0010
p.54
8
ISO
80~1600
p.40
9
Aperture value
F3.5 ~ F15
-
10
Shutter speed
8 ~ 1/2,000
-
11
Flash
On/Off
p.33
12
Photo Size / Movie Size
3648x2736 ~ 320x240
p.38
13
Recording date
2010/01/01
p.54
Using the camera buttons to set the camera
Thumbnail ( º ) / Enlargement ( † ) button
In Play mode, you can use the buttons on the camera to conveniently
set up the Play mode functions.
Ê Searching or Deleting Files
1. Press the Thumbnail button in Smart
Album.
2. Each time you press the Thumbnail
button, the files in a category are
displayed in Smart Album screen.
3. Select the file by pressing the Up / Down /
Left / Right buttons.
4. Press the Delete(n) button to delete the selected file.
Thumbnail ( º ) / Enlargement ( † ) button
Smart Album
You can view multiple pictures, enlarge a selected picture, and crop
and save a selected area of an image.
1. Once a picture has been played back,
press the Thumbnail button to run Smart
Album mode.
2. Press the Left / Right button to move to a
desired image.
3. Press the Digital Zoom button to return to
the normal display mode.
º
11
1
3
5
2010.01.01
[3-Thumbnail Window]
†
11
12
Filter
1
3
5
†
11
12
Filter
2010.01.01
[9-Thumbnail Window]
1
3
5
2010.01.01
[20-Thumbnail Window]
å When Smart Album feature runs or a category is selected, it
may take few seconds depends on recorded data volume.
However, it is not a malfunction please wait until Smart Album
screen appears.
Pressing the thumbnail
button ( º )
Pressing the enlargement
button ( † )
11
12
Filter
[Highlighted image]
12
Filter
º
1
3
5
2009.01.01
2010.01.01
[Smart Album 3-Thumbnail Window]
Ê Smart Album Filter
1. Press the MENU button in Smart
Album mode.
2. Selecting the desired category enables
to categorize and search the files by
using the Up / Down button.
Type
✔ Date
Color
Week
11
12
Back
1
3
5
Set
061
Thumbnail ( º ) / Enlargement ( † ) button
Ê Details of Each Category
Category
Type
Date
Color
Week
Description
Ê The maximum enlargement rate in proportion to the image size
File Format
Categorized depending on the file type
(e.g., picture, video, or voice)
Categorized depending on the sequence
of recorded dates.
Pictures,
Videos, Voice
Categorized depending on the main
color.
Categorized depending on the sequence
of recorded weeks.
Ê Image enlargement
1. Select an image that you want to enlarge and
press the enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the thumbnail button will zoom
back to the original full sized image.
- You can tell whether the image
displayed is an enlarged view by
checking the image enlargement
indicator shown at the top left of the
Trim
LCD monitor. (If the image is not an
enlarged view,
the indicator will not be displayed.) You can also check the
area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
062
Image size
Maximum
enlargement
rate
X11.4
X9.5
X9.3
X9.6
X8.0
X6.4
X3.2
Ê Trimming : You can extract part of the image that you want and
save it separately.
1. Select an image that you want to
enlarge and press the enlargement
Trimming?
button. Press the OK button and a
Yes
message will be displayed.
No
2. Select a desired sub menu by
pressing the Up / Down button
Confirm
and press the OK button.
- [Yes] : The trimmed image will be saved as a new file name,
and appear on the LCD monitor.
- [No] : The trimming menu will disappear.
Ä If there is not enough memory space to save the trimmed
image, the image can’t be trimmed.
Info (DISP) / Up button
Play & Pause / OK button
When the menu is displayed on the LCD monitor, the Up button
operates as a direction button.
When the menu is not displayed on the LCD monitor, pressing the
Info button will display image information on the LCD monitor.
In Play mode, the play & pause / OK button works as follows:
Info (DISP) button
Info (DISP) button
- W
hen the menu is displayed on the LCD monitor, the OK button
is used for confirming data that is changed by using the 5 function
button.
- If a still image with a voice memo, a voice file or a movie clip is
playing
·In Stop mode : P
lays a still image with a voice memo, a voice
file or a movie clip.
·During playback : Temporarily stops playback.
·In Pause mode : Resumes playback
Info (DISP) button
Play
[ Voice recording is stopped ]
Pause
Stop
[ Voice recording is playing ]
Play
Stop
[ Voice recording is paused ]
063
Left / Right / Down / MENU button
Delete ( n ) button
Left / Right / Down / MENU buttons activate the following.
This deletes images stored on the memory.
- Left button
1. Select an image that you want to delete by pressing the
Left / Right button and press the Delete ( n ) button.
: While the menu is showing, the Left button
operates as a direction button. While the menu is
not showing, press the Left button to select the
previous image.
- Right button : While the menu is showing, the Right button
operates as a direction button. While the menu is
not showing, press the Right button to select the
next image.
- Down button : While the menu is showing, the Down button
operates as a direction button.
- MENU button : W
hen you press the MENU button, the play mode
menu will be displayed on the LCD monitor. Pressing
it again will return the LCD to the initial display.
Delete File?
Delete File?
Yes
No
Multiple Delete
Yes
No
Multiple Delete
11
Set
[Single Image]
12
1
3
5
Set
[Thumbnail Image]
2. To add images to delete, select the [Multiple Delete] menu.
- Left / Right button : Selects images
- OK button
: checks for deletion
- Fn button
:d
eletes the
selected images.
Prev
Select Next
Delete
3. Select the submenu values by pressing the Up / Down button
and then press the OK button.
- If [Yes] is selected: deletes the selected images.
- If [No] is selected : cancels "Delete Image".
064
Setting up the play back function using the LCD monitor
Play mode functions can be changed by using the LCD monitor.
In the Play mode, pressing the MENU button displays the menu on
the LCD monitor. The menus you can set up in Play mode are as
follows. To capture an image after setting up the play menu, press
the Play mode button or shutter button.
Menu Tab
Main Menu
Resize
Rotate
Edit
(
)
Photo Style
Selector
Image Adjust
Multi Slide
Show
(
)
Start
Images
Sub Menu
2560x1920
2048x1536
1024X768
2592X1728
1776X1184
2560X1440
1920X1080
Start Image
Right 90˚
Left 90˚
180˚
Horizontal
Vertical
Normal
Soft
Vivid
Forest
Retro
Cool
Calm
Classic
Negative
Custom RGB
Off
ACB
Red-eye Fix
Face Retouch
Brightness
Contrast
Saturation
Add Noise
Play / Repeat
All
Date
Select
-
Menu Tab
Effect
Page
p.67
Main Menu
Multi Slide
Show
(
)
Interval
Music
p.68
Delete
p.68
Protect
p.69
File
Options
(
p.71
Voice memo
)
DPOF
p.71
Copy to Card
Sub Menu
Secondary
Menu
Off
Calm
-
Sweet
Rural
-
Vivid
Lively
-
Shine
Relax
-
1, 3, 5, 10 sec
-
Off
Mist
-
Muse
Fall
-
Dawn
Party
-
Drops
Trip
Page
p.72
p.72
p.72
-
Select
-
All
Yes / No
Select
-
All
Unlock / Lock
Off
-
On
-
Standard
Select / All /
Reset
Index
Yes / No
Size
Select / All /
Reset
Yes
-
No
-
p.73
p.73
p.74
p.75
~
p.76
p.77
065
Setting up the play back function using the LCD monitor
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately)
with a USB cable.
Menu Tab
Main Menu
Images
Size
X
Layout
066
Sub Menu
Menu Tab
Main Menu
Type
Secondary Menu Page
Sub Menu
Secondary Menu Page
Auto
-
Plain
-
Photo
-
Fast Photo
-
Auto
-
Draft
-
Normal
-
Fine
-
Auto
-
Off
-
One Photo
-
All Photos
-
Auto
-
PostCard
-
Card
-
4X6
-
L
-
2L
-
On
-
Letter
-
Auto
-
A4
-
A3
-
Off
-
Auto
-
On
-
Full
-
Yes
-
1
-
No
-
2
-
4
-
8
-
9
-
16
-
Index
-
p.79
Quality
X
Date
File Name
p.79
Reset
Ä Menus are subject to change without prior notice.
p.79
p.80
Edit (
)
Resize
Change the resolution (size) of pictures taken. Select [Start image]
to save an image to be the start-up image.
1. Press the play mode button and press
the MENU button.
2. Click the Up / Down button from the
Edit menu to select [Resize] (
)
menu tab and press the OK button.
3. Select a desired sub menu by
pressing the Left / Right button and
press the OK button.
Resize
Back
Ê Image Resize Types
Move
( o : Selectable)
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
- A large sized image can be resized to a smaller sized image,
but not vice versa.
- Only JPEG images can be resized. Movie clip (AVI), Voice
recording (WAV) files can’t be resized.
- You can change the resolution of only those files compressed in
the JPEG 4:2:2 format.
- The resized image will have a new file name.
The [Start Image] image is stored not on the memory card but on
the internal memory.
- If a new user image is saved, the original user image will be
deleted.
- If the memory capacity is insufficient to store the resized image,
a [Memory Full] message will appear on the LCD monitor and
the resized image can't be stored.
o
067
Edit (
)
After using [Edit] feature, the edited image will be saved as a smaller
size than the original image. (Only with image size from 7M)
Rotating an image
You can rotate the stored images by various degrees.
1. Press the play mode button and press
the MENU button.
2. Click the Up / Down button from the
Edit menu to select [Rotate] ( ‹ ) menu
tab and press the OK button.
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Rotate
Back
Move
Photo Style Selector
It is possible to add various effects to your images by using this function.
1. Press the play mode button and press
the MENU button.
2. Click the Up / Down button from
the Edit menu to select [Photo Style
Selector] (
) menu tab and press
the OK button.
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Style mode
Normal
Right 90˚
Back
Left 90˚
Move
[ ¢ : Right 90˚]
: Rotate picture in a
clock-wise direction
Back
180˚
Move
Back
Move
[ ¡ : Left 90˚]
[ £ : 180˚]
:R
otate picture in a
:R
otate picture 180
counter-clock-wise direction degrees
Horizontal
Vertical
Back
Move
Back
Move
[ ® : Vertical]
: Rotate picture vertically
Vivid
Vivid style is applied.
Forest
Forest style is applied.
Retro
Sepia style is applied.
Cool
Cool style is applied.
Calm
Calm style is applied.
If you display the rotated image on the LCD monitor, empty
spaces may appear to the left and right of the image.
068
Negative
Move
No style effect is applied.
Soft style is applied.
Custom RGB
Back
Description
Soft
Classic
[
: Horizontal]
: Rotate picture horizontally
Icon
Photo Style Selector
Black & white effect is applied.
Negative effect is applied.
Define an RGB tone to create your own photo style.
4. The changed image is saved as a new file name.
Edit (
)
Ê Custom RGB
Ê Red eye Removal
You can change the R (Red), G
(Green) and B (Blue) values of the
image.
- OK button : S
elect / setup the Custom
Color
- Up / Down button : Selects R, G, B
- Left / Right button : Change the values
Red eye effect can be removed from the captured image.
Back
Move
Red-eye Fix
Back
Back
Move
Move
Image Adjust
Ê Face Retouch
1. Press the play back button and press the MENU button.
2. Click the Up / Down button from the Edit menu to select
[Image Adjust] (
) menu tab and press the OK button.
You can make the skin in an image appear clear and beautiful.
Ê ACB
You can automatically adjust the brightness of the dark area,
caused by under exposure to the light source.
1. Select ( ) by pressing the Left / Right
button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as a
new file name.
1. Select ( < ) by pressing the Left /
Right button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as a
new file name.
1. Select (
) by pressing the Left /
Right button and press the OK button.
Then a bar for selecting the face
retouch will be displayed.
2. Change the face retouch by pressing
the Left / Right button.
3. Press the OK button and the image will
be saved as a new file name.
Face Retouch
Back
Move
ACB
Back
Move
069
Edit (
)
Ê Brightness control
Ê Saturation control
You can change the brightness of the image.
1. Select (
) by pressing the Left
/ Right button and press the OK
button. Then a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing
the Left / Right button.
3. Press the OK button and the image
will be saved as a new file name.
You can change the saturation of the image.
Brightness
Back
Move
Ê Contrast control
070
Saturation
Back
Move
Ê Noise effect
You can change the contrast of the image.
1. Select ( @ ) by pressing the Left /
Right button and press the OK button.
Then a bar for selecting the contrast
will be displayed.
2. Change the contrast by pressing the
Left / Right button.
3. Press the OK button and the image
will be saved as a new file name.
1. Select (
) by pressing the Left
/ Right button and press the OK
button. Then a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing
the Left / Right button.
3. Press the OK button and the image
will be saved as a new file name.
You can add noise to an image to add a more classic feel to your
photo.
Contrast
Back
Move
1. Select ( ) by pressing the Left /
Right button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as
a new file name.
Add Noise
Back
Move
Starting the Multi Slide Show (
)
Images can be displayed continuously at preset intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
Selecting Images
1. Press the play mode button and press the MENU button.
2. Press the Up / Down button and select the [Multi Slide Show]
menu tab and press the OK button.
1. Use the Up / Down button to select the
[Images] menu and press the Right
button.
Start the Multi Slide Show
The Multi Slide Show can start only in the [Start] menu.
1. Use the Up / Down button to select the [Start] menu and press
the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[Play] : The Multi Slide Show is
closed after one cycle.
[Repeat]: The Slide show is repeated
until cancelled.
Start
Images
Effect
Play
Repeat:All
:Off
Interval
:1 sec
Music
:Off
Back
Set
3. Press the OK button and the slide show will be started.
- To pause the slide show while playing it back, press the OK
button again.
- Pressing the OK button again will cause the Multi Slide Show
restart.
- To stop playback of the Multi Slide Show, press the OK button,
and then press the Left or Right button.
You can select image to view
Start
Images
Effect
Interval
:All
All
:Off
Date
:1 sec
Select
Music
:Off
2. Select a desired sub menu by pressing
the Up / Down button.
Back
Set
[All]
: All images saved on the
memory are played back.
Press the OK button and the settings are saved.
[Date] : Images taken in a specified date are played back.
Press the OK button and the settings are saved.
[Select] : Play only the selected images. If you press the Up /
Down button, you can select the desired images to play
back. The selected image can be saved as [Select1],
[Select2] and [Select3]. If you save the selected image
with the [New Select] command, it will be saved as
[Select1]. But when a new image is saved again using
[New Select], the former image which had been saved
as [Select1] will be saved as [Select2] automatically.
You can change and cancel the images which were
saved as [Select1], [Select2] and [Select3]. Press the
Fn button and the settings are saved.
3. Select [Play] or [Repeat] in the [Start] menu to start the multi slide
show.
071
Starting the Multi Slide Show (
)
Configure Multi Slide show effects
Setting play interval
Unique screen effects can be used for the Multi Slide Show.
1. Select the [Effect] sub menu by pressing
the Up / Down button and press the
Right button.
2. Use the Up / Down button to select the
type of effect.
3. Press the OK button to confirm the
setting.
Start
Set the Multi Slide Show play interval.
Effect
Off
:All
Calm
:Off
Sweet
Interval
Rural:1 sec
Music
Vivid:Off
Lively
Images
Back
Set
1. Select the [Interval] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the desired interval.
3. Press the OK button to save the
configuration.
Start
Images
:All
Effect
:Off
Interval
1 sec:1 sec
Music
3 sec:Off
5 sec
10 sec
Back
Set
loading time depends on the image size and quality.
å The
the Multi Slide Show is playing, the Movie clips and voice
å While
recording files will not display.
å The interval menu functions only when the Effect is set to [Off].
Setting Background Music
Set the Multi Slide Show music.
1. Select the [Music] sub menu by pressing
the Up / Down button and press the
Right button.
2. Use the Up / Down button to select the
desired Music.
3. Press the OK button to save the
configuration.
072
Start
Images
Off
Effect
Mist :All
Muse:Off
Interval
Fall :1 sec
Music
Dawn
:Off
Party
Back
Set
File Options (
)
1. Press the play mode button and press the MENU button.
2. Press the Up / Down button and select the [File Options] menu tab
and press the OK button.
Deleting images
This deletes images stored on the memory.
1. Press the Up / Down button and select
Delete
Select
Protect
the [Delete] menu tab. And then press the
All
Voice memo
:Off
Right button.
DPOF
2. Select a desired sub menu by pressing the
Copy to Card
Up / Down button and press the OK button.
[Select] : Selection window for an image to
Back
Set
delete is displayed.
- Up / Down / Left / Right : Select an image
- OK button : Select the image for deletion.
( Ë mark)
- Fn button : Press the Fn button to display
the confirmation message.
Select
Delete
Select the [Yes] menu and
press the OK button to delete
marked images.
[All] : Displays confirmation window.
Delete All File(s)?
Yes
Select the [Yes] menu and press the
No
OK button to delete all unprotected
images. If there aren't any protected
Set
images, all the images are deleted
and a [No Image File] message will appear.
3. After deletion, the screen will be changed to the play mode screen.
11
12
1
3
å Of all the files stored on the memory, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place.
The startup image is stored on the camera's internal memory
(i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory.
Protecting images
This is used to protect specific shots from being accidentally
erased (Lock). It also unprotects images that have been previously
protected (Unlock).
1. Press the Up / Down button and select
the [Protect] menu tab. And then press
the Right button.
5
2. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
[Select ] : S
election window for an image
to be protected / released is
displayed.
- Up / Down / Left / Right : S
elect an
image
- OK button : P
rotect / release the image
- Fn button : Your changes will be saved
and the menu will disappear.
Delete
Protect
Voice memo
Select
:Off
All
DPOF
Copy to Card
Back
11
12
Select
Set
1
3
5
Set
073
File Options (
)
[All] : Protect / release all saved images
- If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
- An image in LOCK mode will be
protected from the delete function
or [Delete] function, but will NOT be
protected from the [Format] function.
Voice memo
Protect All?
Lock
Unlock
You can add your voice to a stored still image.
Delete
Protect
Set
Voice memo
DPOF
Off
:Off
On
Copy to Card
Back
Set
[Voice memo menu]
Start
[Ready for recording]
Stop
[Voice is recording]
- Press the shutter button, the voice will record for 10 seconds.
- To stop the recording, press the shutter button.
074
File Options (
)
DPOF
POF(Digital Print Order Format) allows you to embed printing
ÊD
information on your memory card’s MISC folder. Select the
pictures to be printed and how many prints to make.
he DPOF indicator will display on the LCD monitor when an image
ÊT
that has DPOF information plays back. Images can then be printed
on DPOF printers, or at an increasing number of photo labs.
his function is not available for Movie clips and Voice recording files.
ÊT
hen the wide angle image is printed as a wide angle print, 8%
ÊW
of the left and right side of the image may not be printed. Check
that your printer can support the wide angle image when you print
the image. When you print the image at a photo lab, request that
the image is printed as a wide angle image. (Some photo labs
may not support the wide angle size print.)
å Depending on the printer, the image saved in portrait orientation
may not be printed in portrait orientation.
Ê Standard
This function allows you to embed printing quantity information on
a stored image.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
Delete
Protect
Select Image
Voice memo
DPOF
2. Press the Right button again and
[Standard] sub menu will display.
3. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
[Select] : S
election window for an
image to print is displayed.
- Up / Down / Left / Right : S
elect an
image to print.
- Zoom button : Select the number of
prints.
[All] : C
onfigure number of prints for all
pictures except movie and voice
files.
- Up / Down button : Select a number of
prints
[Reset] : Cancel the print setup.
Copy to Card
Select
All
Reset
:Off
Standard
Index
Size
Back
11
Set
00
00
00
02
12
1
01
3
Quantity
5
Set
01
Quantity
Set
4. Press the OK button to confirm the setting. If an image carries
DPOF instruction, the DPOF indicator (
) will show.
075
File Options (
)
Ê Index
Images (except for movie clips and voice files) are printed as index
type.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
2. Select the [Index] menu and press the
Right button again. Sub menu will
display.
Delete
Protect
Voice memo
Setting Index?
DPOF
Yes
Copy to Card No
:Off
Standard
Index
Size
Back
Set
3. Select a desired sub menu by pressing the Up / Down button.
If [Yes] is selected: The image will be printed in index format.
If [No] is selected : Cancel the index print setting.
4. Press the OK button to confirm the setting.
Ê Print size
You can specify the print size when printing images stored on the
memory card. The [Size] menu is available only for DPOF 1.1
compatible printers.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
Delete
Protect
VoiceSelect
memoImage
Select
All
Copy to CardReset
DPOF
2. Select the [Size] menu and press the
Right button again. Sub menu will
display.
3. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
[Select] : Selection window to change
the printed size of the image
is displayed.
- Up / Down / Left / Right : Select an image.
- Zoom W/T Button : Change the print size.
- Fn button : Your changes will be
saved and the menu will
disappear.
[All] : Change print size of all saved
images.
- Up / Down button : Select a print size
- OK button : Confirm the changed setting.
[Reset] : Cancel all of the print size settings.
:Off
Standard
Index
Size
Back
11
Set
Cancel
Cancel
Cancel
Cancel
12
1
Cancel
3
Size
5
Set
3X5
Size
Set
Ä DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
å Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
076
File Options (
)
Copy to Card
å If there is not enough space available on the memory card to
This enables you to copy image files, movie clips and voice
recording files to the memory card.
1. Select the [Copy to Card] menu tab by
pressing the Up / Down button. And then
press the Right button.
Delete
Protect
Voice memo
DPOF
:Off
Copy to Card
2. Select a desired sub menu by pressing
Yes
No
the Up / Down button and press the OK
Back
Set
button.
- [Yes]: All images, movie clips and voice recording files saved
in the internal memory are copied to the memory card
after the [Copying] message is displayed. After copying
has been completed, the screen will return to play mode.
- [No] : Cancels "Copy to Card".
copy saved images on the internal memory (About 7.5MB), the
[Copy to Card] command will copy only some of the images and
display [Memory Full] message. Then the system will return to
the playback mode. Please be sure to delete any unnecessary
files to free up space before inserting the memory card into the
camera.
å When you move the images that are stored on the internal
memory by doing [Copy to Card] to the card, the next number of
file names will be created on the card to avoid duplication of the
file name.
- When the [Reset] of the [File No.] setup menu is set : The
copied file names start from after the last stored file name.
- W
hen the [Series] of the [File No.] setup menu is set : The copied
file names start from after the last captured file name. After
completing [Copy to Card], the last stored image of the last copied
folder is displayed on the LCD monitor.
077
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.
Ê Setting up the camera for connection to the printer
1. Connect the camera and printer with USB cable.
2. Once the camera is turned on, the camera automatically recognizes
the printer and is connected to it.
Ä If automatic connection fails, set the [USB] menu to [Printer]. (p.57)
Ä For a printer that can enable removable disk, set the [USB] menu to
[Printer].
Ê Connecting the Camera to a Printer
078
Ê Easy printing
When you connect the camera to printer
in the Play back mode, you can print a
picture easily.
- Pressing the Left / Right button :
Selects a previous / next image.
- Pressing the OK button :
Currently displayed image will be
printed with the printer’s default settings.
Print
Menu
PictBridge : Picture Selection
PictBridge : Print Setting
You can select images you want to print.
You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print and File Name Print menus for printed pictures.
Ê Setting the Number of Copies to Print
1. Press the MENU button and the
Images
:One Photo
One Photo
PictBridge menu will display.
Size
All:Auto
Photos
2. Use the Up / Down button to select the
Layout
:Auto
[Images] menu and press the Right
Type
:Auto
button.
Quality
:Auto
3. Use the Up / Down button to select a
Back
Set
desired sub menu and press the OK
button.
- S
elect [One Photo] or [All Photos]. A screen where you can
set the number of copies to print will appear as shown below.
Quantity
1. Press the MENU button and the
PictBridge menu will display.
2. Use the Up / Down button to select
the desired menu, and then press the
Right button.
3. Use the Up / Down button to select
the desired sub menu value, and then
press the OK button.
Images
:One Photo
Auto
:Auto
Postcard
Size
Card
:Auto
4x6
L :Auto
Layout
Type
2L
:Auto
Quality
Back
Set
Menu
Function
Sub menu
Size
Set the size of the printing paper
Auto, PostCard, Card,
4X6, L, 2L, Letter, A4, A3
Layout
Set the number of pictures to be
printed on a sheet of paper
Auto, Full, 1, 2, 4, 8, 9, 16,
Index
Set the quality of the printing
paper
Auto, Plain, Photo,
Fast Photo
Set the quality of the picture to
be printed
Auto, Draft, Normal, Fine
Set whether to print the date
Auto, Off, On
Set whether to print the file name
Auto, Off, On
1
0
Set
[When [One Photo] is selected]
Quantity
Set
[When [All Photos] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Photo] is selected : Use the Left / Right button to
select another picture. After
selecting another picture, select
the number of prints for another
picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting
the number of prints.
4. Press the play mode button ( g ) and images will be printed.
Type
Quality
Date
File Name
Ä Some menu options are not supported on all printers.
If not supported, the menus are still displayed on the LCD, but are not
selectable.
079
PictBridge : Reset
Important notes
Initializes user-changed configurations.
Be sure to observe the following precautions!
1. Use the Up / Down button to select the
[Reset] menu tab. And then press the
Right button.
2. Use the Up / Down button to select the
desired sub menu and then press the
OK button.
Date
:Auto
File Name
Reset
:Auto
No
Yes
No
Back
Set
If [Yes] is selected : All print and image
settings will be reset.
If [No] is selected : Settings will not be reset.
Ä Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
åT
his unit contains precision electronic components. Do not
use or store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
å Do
not leave this camera in places subject to dust, chemicals
(like naphthalene and mothballs), high temperature and high
humidity. Keep this camera with silica gel in a hermetically
sealed box when not planning to use the camera for a long
period of time.
å Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the
camera unusable.
å Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this
camera is not used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the
camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do
not let water or sand get inside the camera. Doing so may result
in failure or may permanently damage the unit.
080
Important notes
åE
xtremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic
circuitry. If this occurs, turn the camera off and wait for at least
1 hour until all moisture is dispersed. Moisture built up can also
occur on the memory card. If this happens, turn off the
camera and remove the memory card. Wait until the moisture
has dispersed.
å Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
- Take care not to get fingerprints or foreign substances on the
surface of the lens.
å If the digital camera is not used for a long period, an electric
discharge can occur. It is a good idea to remove the battery
and the memory card if you do not intend using the camera
for an extended period of time.
å If the camera is exposed to electronic interference, it will turn
itself off to protect the memory card.
åC
amera Maintenance
- Use a soft brush (available from photo stores) to gently clean the
lens and LCD assemblies. If this does not work, lens cleaning
paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this
camera to come into contact with solvent materials such as
benzol, insecticide, thinners etc. This may damage the body
shell of the camera and also affect its performance. Rough
handling can damage the LCD monitor. Take care to avoid
damage and keep the camera in its protective carry case at all
times when not in use.
åD
o not attempt to disassemble or modify the camera.
åU
nder certain conditions, static electricity can cause the flash
unit to fire. This is not harmful to the camera and is not a
malfunction.
å When images are uploaded or downloaded, the data transfer
may be affected by static electricity. In this case, disconnect
and re-connect the USB cable before trying the transfer again.
å Before
an important event or going on a trip, you should
check the camera condition.
- Take a picture for testing the camera condition and prepare extra
battery.
å If the digital camera is not used for a long period, the date and
time may adopt the default settings by automatical battery
discharged. In this case, reset the date and time correctly before
the recording.
081
Warning indicator
There are several warnings that may appear on the LCD display.
[Card Error]
åMemory card error
à Turn off the camera power and turn it on again
à Insert the memory card again
à Insert and format the memory card (p.53)
[Card Locked]
åThe memory card is locked
à SD/SDHC memory card : Slide the write protect switch to the
top of the memory card
[Memory Full]
åThe memory card or internal memory is full
à Insert new memory card
à Delete unnecessary image files
[No Image File]
åThere are no images stored on the memory
à Take images
à Insert a memory card that is storing some images
082
[File Error]
åFile error
à Delete the file
åMemory card error
à Contact a camera service center
[Low Battery]
åThere is low battery capacity
à Insert fresh battery
Before contacting a service center
Please check the following.
The camera doesn’t switch on
åThere is low battery capacity
à Insert fresh battery (p.15)
åBattery is inserted incorrectly with the polarities reversed
à Insert the battery according to the polarity marks (+, -)
The camera power ceases while in use
åThe battery is exhausted
à Insert fresh battery
åThe Camera is turned off automatically
à Turn on the camera power again
åOperation has ceased in a low temperature outside of the camera
usage temperature range
à Make the camera and battery warm by placing them in your
pocket, etc. and then immediately before shooting, place the
battery in the camera and then shoot
Camera does not take images when pressing the Shutter button
åThere is insufficient memory capacity
à Delete unnecessary image files
åThe memory card has not been formatted
à Format the memory card (p.53)
åThe memory card is exhausted
à Insert a new memory card
åThe memory card is locked
à Refer to [Card Locked] error message (p.82)
åThe camera's power is off
à Turn the camera power on
åThe battery is exhausted
à Insert fresh battery (p.15)
åBattery is inserted incorrectly with the polarities reversed
à Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
åThe camera stopped due to a malfunction
à Remove / reinsert battery and switch the camera on
The images are unclear
åA picture was taken of the subject without setting an appropriate
macro mode
à Select an appropriate macro mode to take a clear image
åTaking a picture beyond the flash range
à Take a picture within the flash range
åThe lens is smudged or dirty
à Clean the lens
083
Before contacting a service center
The flash does not fire
åFlash off mode has been selected
à Disengage flash off mode
åThe camera mode can't use the flash
à Refer to the FLASH instruction (p.33)
Incorrect date and time is displayed
å The date and time have been set incorrectly or the camera has
adopted the default settings
à Reset the date and time correctly
The camera buttons do not operate
åCamera malfunction
à Remove / reinsert battery and switch the camera on
A card error has occurred while the memory card is in the camera
åIncorrect memory card format
à Reformat the memory card
The images don't play back
åIncorrect file name (Violation of DCF format)
à Do not change the image file name
Color of image is different to the original scene
åWhite balance or effect setting is incorrect
à Select appropriate White balance and effect
Images are too bright
åExposure is excessive
à Reset exposure compensation
084
No image on external monitor
å The external monitor has not been connected properly with
the camera
à Check the connection cables
åThere are incorrect files on the memory card
à Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
åCable connection is incorrect
à Check the connection
åThe camera is off
à Turn the camera on
åT
he operating system is not Windows XP, Vista, 7 / Mac OS 10.3.
Alternatively the PC does not support USB
à Install Windows XP, Vista, 7 / Mac OS 10.3 to PC that
supports USB
A part of the LCD screen does not occasionally turn on or a spot appears
åAlthough the LCD screen is manufactured with high precision
technology, the precision pixels are not occasionally lighted or the
red, white and blue spots appear
ÃT
his phenomenon does not affect the quality of the recorded
image and it is not a malfunction
A vertical line appears on the LCD screen when taking a picture of
a bright object
åIf a subject is exposing bright lights, a gray, black, red or purple
vertical line may appear
ÃT
his is a phenomenon called smear and it does not affect the
quality of the recorded image. This is not a malfunction
Specifications
Image Sensor
- Type : 1/2.33" CCD
- Effective Pixels : Approx. 10.2 Mega-pixels
- Total Pixels : Approx. 10.3 Mega-pixels
Lens
- Focal Length : SAMSUNG Lens f = 4.9 ~ 24.5mm
(35mm film equivalent : 27 ~ 135mm)
- F No. : F3.5(W) ~ F5.9(T)
- Digital Zoom : ·Still Image mode :1.0X ~ 3.0X
·Play mode : 1.0X ~ 11.4X
(depends on image size)
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in
flash, Slow sync, Flash off, Red-eye Fix
- Range : Wide : 0.2m ~ 2.68m
Tele : 0.5m ~ 1.59m (ISO AUTO)
- Recharging Time : Approx. 4 sec
Sharpness
- Soft+, Soft, Normal, Vivid, Vivid+
White Balance
- Auto, Daylight, Cloudy, Fluorescent_H,
Fluorescent_L, Tungsten, Custom
Image Stabilization - DIS (Digital Image Stabilization)
Voice Recording - Voice Recording (max. 10 hours)
- Voice Memo in Still Image (max. 10 sec.)
LCD Monitor
- 2.5" color TFT LCD (230,000 dots)
Date Imprinting - Date, Date & Time, Off (user selectable)
Focusing
- Type : T TL auto focus (Multi AF, Center AF, Face Detection
AF)
- Range
Shooting
- Still Image
·Mode : Smart Auto, Program, DIS,
Photo Help Guide, Scene
·Scene : B
eauty Shot, Frame Guide, Night, Portrait,
Children, Landscape, Close-up, Text,
Sunset, Dawn, Backlight, Fireworks,
Beach & Snow
·Shooting : Single, Continuous, Motion Capture, AEB
·Smart Auto : M
acro, Macro Text, White, Landscape,
Action, Tripod, Night, Night Portrait,
Backlight, Backlight Portrait, Portrait,
Macro Portrait, Blue Sky, Sunset Sky,
Macro Color, Natural Green
·Self-timer : 1
0 sec., 2 sec., Double,
Motion Timer
Normal
Macro
Auto Macro
Wide
80cm ~ Infinity
5cm ~ 80cm
5cm ~ Infinity
Tele
100cm ~ Infinity
100cm ~ 150cm
100cm ~ Infinity
Shutter
- Smart Auto : 8 ~ 1/2,000 sec., Program : 1 ~ 1/2,000 sec.,
Night : 8 ~ 1/2,000 sec., Fireworks : 2 sec.
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center-Weighted,
Face Detection AE
- Compensation : ±2EV (1/3EV steps)
- ISO : Auto, 80, 100, 200, 400, 800, 1600
085
Specifications
- Movie clip
·With Audio or without Audio
(user selectable, recording time : max 2 hours)
·Size : 640x480, 320x240
·Frame rate : 30 fps, 15 fps
·5X Optical Zoom and Mute in Zooming
·Movie Editing (Embedded): Pause during
recording, Still Image Capture
Storage
- Media
·Internal memory : About 7.5MB flash memory
·External memory (Optional) :
SD card (Up to 2GB guaranteed)
SDHC card (Up to 8GB guaranteed)
- File Format
·Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
·Movie clip : AVI (MJPEG)
·Audio : WAV
- Image Size
3648X
2736
3648X
2432
3584X
2016
3072X
2304
2560X
1920
2048X
1536
1024X
768
Super Fine About 182 About 200 About 252 About 252 About 334 About 494 About 1236
Fine
About 334 About 361 About 441 About 444 About 577 About 813 About 1670
Normal
About 471 About 510 About 611 About 618 About 792 About 1065 About 1872
Ä These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
Effect
- Shooting : P
hoto Style Selector, Image Adjust
(Sharpness, Contrast, Saturation)
- Editing : Resize, Rotate, Photo Style Selector,
Image Adjust (ACB, Face Retouch,
Red-Eye Fix, Brightness, Contrast,
Saturation, Add Noise)
Image Play - Type : S
ingle image, Thumbnails, Smart Album,
Multi slide show, Movie clip
Ä Multi slide show : Slide show with Effect & Music
Interface
- Digital output connector : USB 2.0
- Audio : M
icrophone: Mono,
Internal Speaker: Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 4.2 V
086
- Capacity (1GB Size)
Specifications
Power Source
- Rechargeable battery : BP70A, 3.7V
(740mAh)
Ä Included battery may vary depending on
sales region.
Dimensions (WxHxD)
- 96.3 X 58 X 21.9mm
(excluding protrusions)
Weight
- Approx. 113.8g (without battery and card)
Operating Temperature - 0 ~ 40°C
Operating Humidity
- 5 ~ 85%
Software
- Intelli-studio, Adobe Reader
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
087
Transferring files to your computer (for Windows)
For Windows users
Ê Programs contained on the CD
Transfer files by connecting your camera to your PC.
Ê Installing programs
Hardware and software requirements
Item
Purpose
Intelli-studio
Edit photos and videos.
Adobe Reader
View the user manual.
å Using a self-assembled PC or a PC and OS that are not
supported may void your warranty.
CPU
Intel® Pentium®4 3.0 GHz or higher
AMD Athlon™ FX 2.2 GHz or higher
å The programs may not work properly on 64-bit Edition of
RAM
512 MB or more (1 GB or more recommended)
å Intelli-studio may not perform correctly on some computers, even
OS
Others
088
Requirements
Program
Windows XP/Vista/7
- USB port
- CD-ROM drive
- nVIDIA Geforce 7600GT or higher
Ati X1600 series or higher
- 1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
- Microsoft DirectX 9.0c or later
Windows XP, Vista and 7.
when the computer meets the requirements.
å If your computer does not meet the requirements, videos may not
play correctly or it may take longer to edit videos.
å Install DirectX 9.0c or above before you use the program.
Transferring files to your computer (for Windows)
1. Insert the installation CD in a compatible CD-ROM drive.
2. When the setup screen is displayed, click Samsung Digital
Camera Installer to start installation.
Ê Transferring files to your PC
Once you connect the camera to your PC, the camera will be
recognized as a removable drive.
å The battery will be charged while the camera is connected to a
PC with the USB cable.
1. Connect your camera to your PC with the USB cable.
å You must plug the end of the cable with the indicator light (▲)
3. Select programs to install and follow the onscreen instructions.
into your camera. If the cable is reversed, it may damage your
files. The manufacturer is not responsible for any loss of data.
4. Click Exit to complete the installation and restart your computer.
089
Transferring files to your computer (for Windows)
2. Turn on the camera.
Ê Disconnecting the camera (for Windows XP)
- The computer recognizes the camera automatically.
The way to disconnect the USB cable for Windows Vista/7 is similar.
å If the camera fails to connect, a pop-up window will appear.
Select Computer.
1. If the status lamp on your camera is blinking, wait until it stops.
2. Click
on the tool bar at the bottom right of your PC screen.
3. On your PC, select [My Computer à Removable Disk Ã
DCIM Ã 100PHOTO].
4. Select the files you want and drag or save them to your PC.
3. Click the pop-up message.
4. Remove the USB cable.
090
Transferring files to your computer (for Windows)
Ê Using Intelli-studio
Once you have installed the Intelli-studio on your PC, the Intelli-studio starts automatically when a camera is connected with your PC. If the
Intelli-studio does not start after you have connected the camera to your PC, double-click the Intelli-studio icon on your Windows desktop.
The Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.
For details, select [Help à Help] in the program.
å You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
å You cannot copy files in your computer to the camera.
å Intelli-studio supports the following formats:
- Videos: AVI(MJPEG), MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9)
- Photos: JPG, GIF, BMP, PNG, TIFF
091
Transferring files to your computer
(for Windows)
Icon
Description
1
Open menus
2
Display files in the selected folder
3
Change to the Photo edit mode
4
Change to the Video edit mode
5
Change to the Sharing mode (You can send files by email
or upload files to websites, such as Flickr or YouTube.)
6
Enlarge or reduce the thumbnails in the list
7
Select a file type
8
View files of the selected folder on your computer
9
Show or hide files of the connected camera
10
View files of the selected folder on the camera
11
View files as thumbnails, in Smart Album, or on a map
12
Browse folders in the connected device
13
Browse folders in your computer
14
Move to the previous or next folder
15
Print files, view files on a map, store files in My Folder, or
register faces
092
Transferring files to your computer
(for Mac)
For Mac users
When you connect the camera to a Macintosh computer, the computer
will recognize the device automatically. You can transfer files directly
from the camera to the computer without installing any programs.
MAC OS 10.3 or later is supported.
1. Connect your camera to a Macintosh computer with
the USB cable.
å You must plug the end of the cable with the indicator light (▲)
into your camera. If the cable is reversed, it may damage your
files. The manufacturer is not responsible for any loss of data.
Transferring files to your computer (for Mac)
2. Turn on the camera.
-T
he computer recognizes the camera automatically and a
removable disk icon will be displayed.
3. Double click the removable disk icon.
4. Transfer photos or videos to the computer.
093
FAQ
Please check the following if the USB connection malfunctions.
Case 1USB cable is not connected or it is not the supplied USB
cable.
à Connect the supplied USB cable.
Case 2The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown
Devices] in Device Manager.
à Turn off the camera, remove the USB cable, plug in the
USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
à Turn the camera power off and on again. Transfer the file
again.
Case 4
When using the USB hub.
à There may be a problem in connecting the camera to the
PC through the USB hub if the PC and the hub are not
compatible. Wherever possible, connect the camera to
the PC directly.
Case 5
Are other USB cables connected to the PC?
à The camera may malfunction when it is connected to the
PC at the same time as another USB cable. In this case,
disconnect the other USB cable, and connect only one
USB cable to the camera.
094
Case 6When I open the Device Manager (by clicking Start
(Settings) Control Panel (Performance and
Maintenance) System (Hardware) Device
Manager), there are Unknown Devices or Other Devices
entries with a yellow question mark(?) beside them or
devices with an exclamation mark(!) beside them.
à Right-click on the entry with the question(?) or
exclamation (!) mark and select "Remove". Restart the
PC and connect the camera again.
Case 7In some security programs (Norton Anti Virus, V3,
etc.), the computer may not recognize the camera as a
removable disk.
à Stop the security programs and connect the camera to
the computer. Refer to the security program instructions
about how to temporarily disable the program.
Case 8The camera is connected to the USB port located on
the front of the computer.
à When the camera is connected to the USB port located
on the front of the computer, the computer may not
recognize the camera. Connect the camera to the USB
port located on the back of the computer.
FAQ
FCC notice
Ê When the DirectX 9.0c or later is not installed
à Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) R
un the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed.
Visit the Microsoft website for downloading the DirectX.
Ê NOTE:
Ê If a PC connected with the camera stops responding while
Windows is starting.
à In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’
t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the distance between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio / TV technician for help.
Ê CAUTION:
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate
the equipment.
095
FCC notice
Ê Declaration of Conformity
Trade Name
: SAMSUNG ELECTRONICS AMERICA, INC.
Model No.
: Samsung SL50
Responsible Party: SAMSUNG ELECTRONICS AMERICA, INC.
Address
: 105 Challenger Road Ridgefield Park NJ
Telephone No. : 1-800-SAMSUNG(726-7864)
his device complies with Part 15 of the FCC Rules. Operation
T
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to
effectively communicate Samsung’s environmental
friendly product activities to the consumers. The
mark represents Samsung’s continuous effort on
development of environmental conscious products.
096