Ctouch Leddura xts User manual

Smart innovation!
User’s Manual
Leddura xts
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This User's Manual includes detailed usage instructions for your product.
Please read this manual thoroughly.
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual equipment appearance.
Equipment design and specifications may be changed without notice.
Important Safety Instructions 1
Always comply with the following precautions and usage tips to avoid dangerous
situations and ensure peak performance of your product
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
i
i
CAUTION
RISK OF EXPLOSION IF BATTERY BY
AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
This symbol indicates that high voltage is present inside. It is dangerous to make
any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
The slots and openings in the cabinet and in the back or bottom are provided for
necessary ventilation. To ensure reliable operation of this apparatus, and to protect it
from overheating, these slots and openings must never be blocked or covered.
Do not cover the slots and openings with a cloth or other materials.
Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or
other similar surface.
Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet,
unless proper ventilation is provided.
Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed
to direct sunlight.
Do not place heat generating items such as candles, ashtrays, incense, flammable gas
or explosive materials near the product.
Do not place a water containing vessel on this apparatus, as this can result in a risk of
fire or electric shock.
Do not expose this ap paratus to rain or place it near water (near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this
apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
This apparatus use batteries. In your community there might be regulations that require
you to dispose of these batteries properly under environmental considerations. Please
contact your local authorities for disposal or recycling information.
Do not exceed the standard capacity of a multi-plug or power outlet extension when
using it for the product.
There is a danger of electric shock of fire hazard.
To protect this apparatus from a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the set due to lightning and
power line surges.
Important Safety Instructions 2
Never insert anything metallic into the open parts of this apparatus. Doing so may
create a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified
technician should open this apparatus.
Do not touch the power cord with wet hands.
-There is a danger of electric shock.
Plug the power cord firmly int o the power outlet.
-Failure to do so may cause fire hazard.
Do not unplug the power cord by pulling the cable only.
-If the cord is damaged, it may cause electric shock.
If this apparatus does not operate normally - in particular, if there are any unusual
sounds or smells coming from it - unplug it immediately and contact an authorized
dealer or service center.
Be sure to pull the power plug out of the outlet if the product is to remain unused or if
you are to leave the house for an extended period of time.
-Accumulated dust can cause an electric shock, an electric leakage or a fire by causing
the power cord to generate sparks and heat or the insulation to deteriorate.
Be sure to contact an authorized service center, when installing your product in a
location with heavy dust, high or low temperatures, high humidity, chemical substances
and where it operates for 24 hours such as the airport, the train station etc.
-Failure to do so may cause serious damage to your product.
Do not allow children to hang onto the product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not install the product in an unstable location such as a shaky self, a slanted floor or
a location exposed to vibration.
Do not drop or impart any shock to the product. If the product is damaged, disconnect
the power cord and contact a service center.
Make sure to pull out the power cord from the outlet before cleaning the product.
Table of contents
Unpacking
5
Connections
7
Components
Remote Control
Getting Started - Power on/off
6
8
9
Android Screen
10
IFTD Settings Instruction for Android
12
Touch OSD MENU
Display Settings
Other Settings
Network Settings
Touch Interface
Connecting touch sensor with external device
Accessories
11
13
13
14
17
19
20
Unpacking
i
Read Safety Instructions before
installing the product.
IFTD
Remote Control
with Batteries
Touch Pen package
Quick Manual
AC Power Cable
5
HDMI Cable
Components
Touch Screen
Front view
Home Button
C2C Holder port
USB port
OPS slot
Side view
(Left)
C2C BOX Port
Side view
(Right)
Main Board Cover
Rear View
I/O ports
6
Connections
Rear View
Main Board Cover
1
2
3
4
5
6
7
8
9
Connect the power cord to this connector.
3. Line Out
Connect the external audio amplifier.
4. Digital Audio output
5. HDMI3
6. HDMI2
7. HDMI1
8. DP
9. VGA
10. Line in(VGA)
11. USB (upgrade)
12. RS232C
13. WAN
14. Line Out
15. Sensor USB
11
12
I/O port connection
1. AC INPUT
2. SB Port
10
Connect the EZ Sound Bar.
Connect the audio component by optical digital audio.
Connect an HDMI device to this jack.
Connect an HDMI device to this jack.
Connect an HDMI device to this jack.
Connect a Display Port device to this jack.
Connect a video from a computer to this jack.
Connect an Audio input for PC.
Only Use to upgrade.
Connect the RS232C controller device.
Connect to the IFTD to your Internet Access point.
Connect to an external Internet Device.
Connect to PC USB port for touch screen.
7
13
14
15
Remote Control
2
1
3
3
5
4
6
1. Power
7
Remote Control
Turn on/off the screen
Turn on/off the back light
2. BLU(Back Light Unit) on/off
Adjust the volume
3. Volume
Mute on/off
4. Mute
Screen Freeze on/off
5. Freeze
Change Input source
6. IFTD, OPS, DP, HDMI 1, HDMI 2, HDMI 3, BOX
Live 4 PIP
7. 4PIP
8
Getting Started
1. Connect AC power cable to AC inlet
1
Click
2
2. Press Home Button or Press power button
on Remote Control to turn on the IFTD.
9
Android Screen
After booting process, Android screen will appear
TIME
APP
Android
Button
Navigation
3sec
Power off
OSD MENU
1. After booting, press Home button
to open Touch OSD menu
2. Press Home Button for 3 seconds
to turn off the system
Navigation
Power off
Settings
Windows
Source
Miracast
10
Screen
shot
Apps
Touch OSD Menu
INPUT SOURCE
Volume
Brightness
on
on
100
100
* LIVE 4PIP
* Quick Input Source Change
* Volume
* Brightness
* Quick Input Source Change : Touch to change to the input source
Status Index
Current Input
Source
Connected
Input Source
Touched
Not connected
* LIVE 4 PIP
LIVE 4 PIP shows 4 input sources in one screen in real time.
Touch one of the input sources screen to change to that input source
Press Home Button to finish 4 PIP and go back to previous screen
Volume
Brightness
on
on
100
100
* Volume / Brightness
: Volume Control (0~100)
: Brightness Control (0~100)
While Back Light Unit is off, touch the screen or press Home
button to turn the Back Light on
11
IFTD setting instructions in Android
IFTD settings
Backlight off options
Select the timer to shut down the IFTD when
backlight is off
No signal options
Select the timer to shut down the IFTD when
there is no signal
USB charging options
Set the USB charging in standby mode
UTP support option
Set the UTP support in standby mode
On - Enable UTP in stanby mode
Off - Disable UTD in stanby mode
12
Display Settings
Color temperature setting
Set the color temperature of IFTD
Picture setting
Set the picture mode of IFTD
Sound setting
Set the sound lineout options
Fixed – output fixed volume
Variable – output adjusted volume
Internal Speaker setting
Turn on/off internal speakers
Other Settings
ID setting
Set the IFTD ID number
IFTD ID number determines the IFTD when multiple
IFTDs are controlled by external PC
Home key locking
Lock or unlock home key of the IFTD
Reset setting
Click ok to reset to default settings of IFTD
13
Network Settings 1
C2C BOX
[ C2C BOX must be connected to enable Wi-Fi ]
[ Check the box to enable/disable Wi-Fi connection ]
14
Network Settings 2
LAN
connect
UTP support option
Connect the LAN cable to the designated port in IFTD.
Check the box to enable/disable Ethernet connection
Software Update options
Click on ‘Software update’ to view system update
options
15
Network Settings 3
Update from external storage device
Click on ‘update from external device’ to enable updating
from USB.
Update status
Click on ‘check now for update’ to view the status of last
update
Update from server
Click on “Software update server’ to download the
updates from website.
Status view
Click on ‘status’ to view the status of the battery, network
and other information
Legal Information
Click to view the legal information about device
Model number
Click to view the model number of the chipset
Android OS Version
Click to view the version of Android in the device
Kernel Version
Click to view the Kernel version in the device
Build number
Click to view the Build number in the device
16
Touch Interface 1
Touch action
Touch actions that can be used with this monitor differ according to operating system and application. The functions of touch
action are also different. For details, check Windows Help and the application’s support documentation.
Touch Operation Mode
Touch action
Single-tab
Double-tab
Swipe
swipe from edge of screen
Drag-and-drop
Slide to pan
Press-and-hold
Zoom
Rotate
Multi-Touch Mode
OS
Mouse Mode
Windows 8 / 8.1
Windows 7
Windows 7 / 8 / 8.1
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
NO
YES *
NO
NO
* When “Recognize press and hold as right click* is set with the Touch Panel Settings Tool. The action may be different from
a mouse right-click in some cases.
** TIPS
In Windows 7, if the checkmark has been removed from 'Enable multi-touch gestures and inking' in 'Pen and touch' in Control
Panel, select the checkbox.
For the procedures for using the touch pen in the Pen Software, see the Pen Software Operation Manual.
■ Common finger and touch pen actions
Single-tap
Same action as left-clicking a mouse.
Touch with your finger/touch pen.
Double-tap
Same action as double-clicking a mouse.
Quickly touch twice with your finger/touch pen.
When double-tapping with your finger,
be sure to lift your finger sufficiently
off the screen after the first tap.
If there is insufficient distance between
the screen and your finger, double-tap
will not take place.
17
Touch Interface 2
Swipe from edge of screen
Swipe
After touching the edge of the monitor with your
finger/touch pen, move horizontally without
releasing your finger/touch pen and then stop.
Touch the screen with your finger/
touch pen, move without lifting, and
then stop.
■ Touch action
Drag-and-drop
Press-and-hold
Same action as drag-and-drop with a mouse.
Touch the screen with your finger/touch pen and
move without lifting. When you have finished the
movement, lift your finger/touch pen
Same action as right-clicking a mouse.
Press briefly with your finger/touch pen, and then lift
your finger/touch pen from the screen.
Slide to pen
With your finger/touch pen
touching the screen, move it up
and down to scroll the screen
18
Touch Interface 3
■ Finger actions
Zoom
Use in a screen that is capable of Zoom in / Out. Touch the screen with two fingers and move your fingers closer together to
Zoom in, or apart to Zoom out.
[ Zoom in ]
[ Zoom out ]
Connecting touch sensor with external device
Connect Touch USB cable to enable touch when external
device is connected.
19
Accessories (Optional)
C2C Pen
OPS
C2C Holder
C2C BOX
C2C Sound Bar
20
Smart innovation!