Samsung YP-F2 Product specifications

For Your Safety
WARNING
Read this manual carefully to ensure proper use of the product
and to avoid any danger or physical damage.
Failing to heed the product instructions may cause serious injury.
Product Use
Improper use can result in explosion,
fire or electric shock.
Do not disassemble, repair
or modify this product on
your own.
Do not get the product wet
or drop it in water.
If the product gets wet, do not
switch it on. Contact a Service
Center.
Do not place the product in
damp, dusty or sooty
areas, as it could result in
fire or electric shock.
To avoid your hearing damage
Using the earphone or headphone for an extended
time can cause a serious damage to your hearing.
If you are exposed to a sound in higher than 85db for an
extended time, you will be adversely affected on your hearing.
The higher the sound is, the more seriously damaged your
hearing is (an ordinary conversation is made in 50 to 60 db
and the noise level on the road is approximately 80 db).
You are strongly advised to set the volume level to medium
(the medium level is usually less than 2/3 of the maximum).
If you feel a ringing in the ear(s), lower the volume
or stop using the earphone or headphone.
To avoid a risk of traffic accident
Do not use the earphone while you are driving a
bicycle, automobile or motorcycle.
Do not leave the product in
areas above 35°C(95°F)
(such as a sauna or inside
a parked car).
During the summer the
temperature inside a car may
rise up to 80°C(176°F).
2
Otherwise it can cause a serious accident and, furthermore, it
is prohibited by the law in some areas.
Using the earphone on the way, in particular, on the crosswalk
can lead to a serious accident.
For your safety, make sure the earphone cable
should not get in the way of your arm or other surrounding objects while you are taking exercise or a
walk.
CAUTION
Failure to follow all instructions lead to physical injuries or damage to the product.
Product Use
Take care to avoid product malfunction and physical damage.
When wearing the product around your neck,
take care not to exert
excessive force on the
neck string.
Avoid malfunction
Do not cause excessive
impact on the product by
dropping it. Do not place
heavy objects on top of the
product.
Prevent any foreign
particles or dust from
entering into the product.
Management of Important Data
Be sure to backup
important data.
Please be aware that we claim no
responsibility for damage from data
loss due to breakdown, repair or
other causes.
Do not spray water on the
product. Never clean the
product with chemical
substances such as
benzene or thinner, as it may
cause fire, electric shock or
deteriorate the surface.
Do not place the product
near magnetic objects, as it
may cause a malfunction.
3
Contents
Safety Precautions ....................................2
Contents ......................................................4
Chapter 2. Importing Music Files
Importing Music Files ..............................18
Chapter 1. Preparation
Checking the Product and
Accessories .................................................7
Checking the Accessories ...........................7
Components ................................................8
Screen Display Information .......................10
Button Functions .......................................11
Charging the battery ...............................12
Basic Use ...................................................13
Transferring Music Files ............................18
Installing Media Studio ..............................19
Connecting to your PC ..............................21
Adding Files/Folders in Media Studio........22
Adding Files/Folders in Media Studio
with Autoscan ............................................24
Transferring Files with Media Studio .........26
Using as a Removable Disk ......................28
Disconnecting from your PC......................29
Chapter 3. Listening to Music/FM Radio
Listening to Music ....................................31
Listening to Music......................................31
User Button Custom Function ...................33
Listening to FM Radio .............................39
Listening to FM Radio ...............................39
Setting a Frequency ..................................40
To Delete Presets ......................................42
Setting FM Radio.......................................43
4
Chapter 4. Settings
Chapter 6. Appendix
Settings .......................................................46
Menu Tree ...................................................59
Manual USB Driver Installation..............60
Product Specifications ............................63
License ........................................................64
Contact SAMSUNG WORLD WIDE ........66
Setting Music .............................................46
Setting Time...............................................48
Setting the Display.....................................49
Setting Language ......................................50
Setting the System ....................................51
Chapter 5. Troubleshooting
System Reset.............................................54
Troubleshooting ........................................55
5
Chapter 1. Preparation
Checking the Product and
Accessories .................................................7
Checking the Accessories ...........................7
Components ................................................8
Screen Display Information .......................10
Button Functions .......................................11
Charging the battery ...............................12
Basic Use ...................................................13
Checking the Product and Accessories
Checking the Accessories
The following diagrams are a guide and
may differ slightly from the actual product
appearance.
Chapter 1. Preparation
■
Earphones
USB Cable
Installation CD
Belt Clip
Design of accessories is subject to change for the purpose of improvement, without notice.
Checking the Product and Accessories
Player
7
Checking the Product and Accessories
Components
Front, Right Side and Top
Earphone Connection Port
User/MENU Button
Power & Play/Pause Button
Screen Display
Move Track/Quick Search Button
8
Chapter 1. Preparation
Bottom
Checking the Product and Accessories
Reset Hole
USB Connection Port
Volume Control Button
Hold Switch
Earphone Connection
√ Top
Earphones
9
Checking the Product and Accessories
Screen Display Information
Music
1 Play/Pause/Stop indicator
2 Current Music Number/
Total Number indicator
3
4
5
6
7
8
Sound Mode indicator
Play Mode indicator
Remaining Battery indicator
Music Title indicator
Play Status Bar
Play Time indicator
FM Radio
1
2
3
4
5
10
FM Reception Indicator
Channel Number Indicator
Mono/Stereo Indicator
Frequency Indicator
Frequency Location Indicator
Checking the Product and Accessories
Button Functions
HOLD
Functions and Use
■
■
HOLD
■
■
■
HOLD
HOLD
■
Long press to quickly scan tracks.
Short press to move to the previous track or play the current track
from the beginning.
■
Long press to quickly scan tracks.
Short press to move to next track.
■
Short press to increase the volume or move to an upper item/menu.
■
Short press to reduce the volume or move to a lower item/menu.
■
Push in the direction of the arrow to lock the button functions.
■
Press with a pointed object to reset.
■
HOLD
Long press to move to the menu screen.
Short press to use user setting functions – Navigation Repeat AB/DNSe/
Play Speed/ Play Mode
Checking the Product and Accessories
HOLD
Long press for power on & off.
Short press for play/pause.
Chapter 1. Preparation
Buttons
11
Charging the battery
Fully charge the battery before using the player for the first
time or when the it has not been used for a while.
Screen Display
■
Charging...
■
Fully Charged
2
3
1 Open the USB cover under the player.
2 Connect the USB cable to the USB port ( ) on your PC.
the other end of the USB cable to the USB Connection Port on the bottom
3 Connect
of the player.
■
It takes about two and a half hours for a full charge although this may vary depending on the PC
environment.
Battery Use
12
■
Recharge and store within the temperature range of 5°C~35°C(40°F~95°F).
■
Do not overcharge (longer than 12 hours). Excessive charging or discharging may shorten the battery’s life.
■
Battery life naturally shortens slowly over time as it is a consumable item.
■
The USB connection may be unstable if you are using a USB hub. Directly connect to the USB port on your PC.
Basic Use
Chapter 1. Preparation
Turning the Power On & Off
Turning the Power On
Press and hold the [
■
] button.
Power is turned on.
Press and hold the [
■
■
NOTE
] button.
Power is turned off.
Power is automatically turned off when none of the buttons have been pressed for a preset
period of time (Default: 10 seconds) in the pause mode. √ Page 47
Playing Music
and hold the [ USER/
1 Press
move to the menu screen.
MENU] button to
Charging the battery/Basic Use
Turning the Power Off
2 Press the [ + , - ] button to select <Music>.
3 Press the [ USER/ MENU] button.
■
Music starts to play.
13
Basic Use (Continued)
Volume Control
Press the [ + , - ] button on the side of the player.
■
■
The Volume Status Bar will appear.
Press the [ + ] button to increase the volume or the [ – ]
button to decrease it.
Lock Function
In Hold mode, all buttons are disabled. This function is
useful when you are walking or jogging.
the [HOLD] switch on the player in the
1 Push
direction of the arrow.
the [HOLD] switch in the opposite direction
2 Push
of the arrow to release the Lock function.
14
Search easily for files using the <Navigation> function.
and hold the [ USER/
1 Press
move to the menu screen.
MENU] button to
■
Basic Use
2 Press the [ + , - ] button to select <Navigation>.
3 Press the [ USER/ MENU] button.
Chapter 1. Preparation
Searching for Files with <Navigation>
The <Navigation> folder list will appear.
4 Press the [ + , - ] button to select a folder of your choice.
Use the [ I] button to move to the file list in the
5 selected
folder.
√√
■
Use the [√√I] button to move to the lower step, the [lœœ ]
button to the upper step.
6 Press the [+ , - ] button to select a file of your choice.
7 Press the [ ] button.
■
The selected file will start playing.
15
Basic Use (Continued)
Reset Function
Reset hole
16
If a product malfunction occurs, you can
re-initialize the system by pressing the
Reset hole. √ P53
Chapter 2. Importing Music Files
Importing Music Files ..............................18
Transferring Music Files ............................18
Installing Media Studio ..............................19
Connecting to your PC ..............................21
Adding Files/Folders in Media Studio........22
Adding Files/Folders in Media Studio
with Autoscan ............................................24
Transferring Files with Media Studio .........26
Using as a Removable Disk ......................28
Disconnecting from your PC......................29
Importing Music Files
Transferring Music Files
To play music files in the player, first transfer music files in MP3, WMA, Audio ASF,
Ogg and other supported formats from your PC.
Follow the steps below to transfer files.
Transferring Music Files
■ Transfer files on your PC to the player using Media Studio √ Page 26
■ Transfer files on your PC to the player using the “Copy” and “Paste” functions
(removable disk) √ Page28
18
Importing Music Files
Installing Media Studio
Use Media Studio to transfer music files from
your PC to the player.
If Media Studio is not installed automatically
CAUTION
■
Before you start!
Insert the installation CD provided with the player into the CD-ROM drive.
1 Click <Install now>.
Chapter 2. Importing Music Files
Install the program on PCs running Windows 2000 or Windows XP after logging on with the
Administrator account. Please refer to the PC user manual on how to log on with the Administrator
account.
Transferring Music Files/Installing Media Studio
19
Importing Music Files
Installing Media Studio (Continued)
2 Click <NEXT>.
■
Media Studio installation starts.
3 After installation is complete, click <Exit>.
■
■
20
An icon is created on the desktop after installation is complete
and Media Studio starts.
If the Autoscan Confirm window appears, refer to page 25
and customize settings.
Importing Music Files
Connecting to your PC
Chapter 2. Importing Music Files
PC Requirements
For use in conjunction with a PC, the following is required:
Pentium 300MHz or higher
100MB of free hard disc space
■ USB Port 2.0
Windows 98SE/ME/2000/XP
CD Rom Drive (2X or higher)
■ DirectX 9.0 or higher
■
■
■
■
Installing Media Studio/Connecting to your PC
1 Open the USB cover under the player.
2 Connect the USB cable to the USB port ( ) on your PC.
the other end of the USB cable to the Power/USB Connection Port on the
3 Connect
bottom of the player.
21
Importing Music Files
Adding Files/Folders in Media Studio
2
3
3
Please refer to Help for more information on how to use Media Studio.
■
Click <MENU> ➝ <Help> ➝ <Help> from the menu on the top of the Media Studio program.
■
NOTE
22
Files already added to the library will not be added again.
Before you start!
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
■
If the program does not start automatically, double Click the Media Studio icon on the desktop.
2 Click the <Media Library> ➝ <Library> tab on the left of the Media Studio window.
■
The <Add File>/<Add Folder>/<Auto Scan> taps will appear.
To add files
■
The Open window will appear.
4 Select the files to add and click <Open>.
■
4
The selected files are added to the list.
To add folders
3 Click <Add Folder>.
■
The Browse folder is window will appear.
4 Select the folder to add and click <OK>.
■
The selected folder is added to the list.
Adding Files/Folders in Media Studio
3 Click <Add File>.
Chapter 2. Importing Music Files
1 Media Studio will automatically start when the player is connected to your PC.
4
23
Importing Music Files
Adding Files/Folders in Media Studio with Autoscan
3
24
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
1 Media Studio will automatically start when the player is connected to your PC.
■
If the program does not start automatically, double Click the Media Studio icon on the desktop.
2 Click the <Media Library> ➝ <Library> tab on the left of the Media Studio window.
■
The <Add File>/<Add Folder>/<Auto Scan> taps will appear.
■
The Autoscan window will appear.
4 Click <OK>.
■
Automatically scans files and adds them to the library.
■
The first time you use Media Studio, the Autoscan Confirm window and Options window appear accordingly. Set the options,
then click <OK> to start Autoscan.
How to setup Autoscan Options
Click <MENU> ➝ <Tools> ➝ <Environment Settings>
from the top of the Media Studio Window and then click the
<Library> tab.
■
Select the range and file type to autoscan.
4
Adding Files/Folders in Media Studio with Autoscan
3 Click <Auto Scan>.
Chapter 2. Importing Music Files
Before you start!
25
Importing Music Files
Transferring Files with Media Studio
3
4
5
6
Device Connection
window
■
Music recognition technology and related data are provided by Gracenote and
Gracenote CDDB® Music Recognition ServiceSM.
■
CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote
CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
NOTE
26
2
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
1 Media Studio will automatically start when the player is connected to your PC.
■
If the program does not start automatically, double click the Media Studio icon on the desktop.
Click a folder of your choice from the Device Connection window on the
2 Double
right of the Media Studio window.
■
Files in the folder will be displayed.
■
A file list will appear in the window in the center.
the checkbox in the list in the center window to select the music files to
5 Click
transfer.
■
The Transmit icon will appear.
6 Click <Transmit>.
■
The selected files are transferred to the player.
■
Do not disconnect the USB cable during file transfer. This may cause damage to the
player or your PC.
■
Files on your PC will not be deleted even if files are transferred to the player.
CAUTION
Transferring Files with Media Studio
3 Click the <Media Library> tab on the left of the Media Studio window.
4 Click <Music>.
Chapter 2. Importing Music Files
Before you start!
NOTE
27
can use the player as a removable
Using as a Removable Disk You
storage device.
Before you start!
■
Connect the player to your PC.
1 Open files/folders to transfer from your PC.
<My Computer> ➝ <Removable
2 Open
Disk> from the desktop.
the files/folders to transfer from your
3 Select
PC and drag and drop them to a folder of
your choice in the <Removable Disk>.
■
■
The <USB Transferring> message will appear during file download or upload. Disconnecting the USB cable
while <USB Transferring> is displayed may cause malfunction of the player.
■
The order of music files displayed in Windows Explorer may differ from the play order on your device.
■
If you move a DRM file(charged file) to the removable disk, the file will not be played.
■
Select the file to save and drag-and-drop it into the removable disk icon.(In numerical, alphabetical order)
If you change the name of music files in Windows Explorer like 001* * * , 002* * *...,
music files will be played in the order of number indicated.
CAUTION
NOTE
■
28
The selected folders or files are transferred to the
player.
What is DRM?
DRM (Digital Rights Management) is a technology and service to prevent the illegal use of digital contents
and protect the profit and rights of copyright holders. DRM files are charged music files applied with the illegal copy protection technology of legally purchased MP3 music.
the steps below to prevent damage to the
Disconnecting from your PC Follow
player and data when disconnecting from your PC.
right corner of the desktop and click
the left mouse button.
1
the <Safely Remove USB Mass
2 Click
Storage Device Drive> message.
Once you clicked <Safely Remove USB
Mass Storage Device Drive>, the player
could not be recharged with power even if
it is connected to the PC.
3 Disconnect the player from your PC.
2
■
Do not disconnect the player from the PC during file transfer. This may cause damage to data
and the player.
■
You cannot remove the hardware while files within the player are being played on your PC. Please
retry after file playback is finished.
CAUTION
Using as a Removable Disk/
Disconnecting from your PC
■
Chapter 2. Importing Music Files
the mouse cursor on top of the
1 Place
@ icon on the taskbar at the bottom
29
Chapter 3. Listening to Music/FM Radio
Listening to Music ....................................31
Listening to Music......................................31
User Button Custom Function ...................33
Listening to FM Radio .............................39
Listening to FM Radio ...............................39
Setting a Frequency ..................................40
To Delete Presets ......................................42
Setting FM Radio.......................................43
■
Before you start!
Transfer the music file of your choice from your PC to the player.
Listening to Music
Listening to Music
Before you start!
Connect your earphones to the player and turn the power on and check
the battery status.
MENU] button to
2 Press the [ + , - ] button to select <Music>.
3 Press the [ USER/ MENU] button.
Music starts to play.
■
■
NOTE
■
The music files compatible with the player are MP3, WMA,
Ogg, Audio ASF
MP1 or MP2 files which only have a changed extension to
MP3, may not play on the player.
To Pause
1 Press the [
■
2 Press the [
■
■
NOTE
] button while the music is playing.
The music playback will be paused.
Chapter 3. Listening to Music/FM Radio Listening to Music
and hold the [ USER/
1 Press
move to the menu screen.
] button again.
The music will play from the point where it stopped.
Power is automatically turned off when none of the buttons
have been pressed for a preset period of time (Default: 10
seconds) in the pause mode. √ Page 47
31
Listening to Music
Listening to Music (Continued)
To search within a track
1 Press and hold the [ lœœ ] or [ √√l ] button while the selected track is playing.
■
It searches to the beginning or the end of the track.
2 Release the button at the point you wish to start.
■
It starts playing from the point you release the button.
To Play from the beginning of the current track
Press the [ lœœ ] button after 5 seconds of play.
■
The current track starts playing from the beginning.
To play the previous/next track
Press the [ lœœ ] button within 5 seconds of play.
■
The previous track will start playing.
Press the [ √√l ] button.
■
The next track will start playing.
■
When playing VBR files, the previous track may not play even if you press the [ lœœ ] button within
5 seconds of the play.
■
Press the [ lœœ ] button within 5 seconds of play to move to the previous track.
CAUTION
32
NOTE
Listening to Music
User Button Custom Function
Customize the user button with the frequently used function for convenience.
To set User Button Mode
and hold the [ USER/
1 Press
move to the menu screen.
MENU] button to
the [ + , - ] button to select <Settings> and
2 Press
then Press the [ USER/ MENU] button.
■
The Settings menu will appear.
■
The User Button Mode menu will appear.
the [ + , - ] button to select the desired user
4 Press
button mode and then press the [ USER/ MENU]
button.
■
■
■
■
■
<Navigation> : You can set to show the navigation file list.
<Repeat AB> : Sets section repeat.
<DNSe> : Selects the sound mode.
<Play Speed> : Adjusts the playback speed between fast and
slow.
<Play Mode> : Selects the repeat playback mode.
User Button Custom Function
the [ + , - ] button to select the <User Button
3 Press
Mode> and then press the [ USER/ MENU] button.
Chapter 3. Listening to Music/FM Radio Listening to Music/
Use the [ USER/ MENU] button during playback
for simple mode change.
33
Listening to Music
User Button Custom Function (Continued)
To make your own Playlist
You can easily listen to your favorite music by adding it
to a Playlist.
1 Set the User Button Mode to <Navigation>.
the [ USER/ MENU] button while a
2 Press
music is playing.
■
The file list of the folder will appear.
files to the playlist and then press the
3 Add
[ USER/ MENU] button.
■
■
NOTE
34
To delete files from a Playlist, select the
is displayed in front of the selected files and the
files are added to the playlist.
files to delete and press the [
USER/
MENU] button again.
To Play a Playlist
MENU] button
the [ + , - ] button to select the <Playlist>
2 Press
and then press the [ USER/ MENU] button.
■
The playlist you set will be displayed.
the [ + , - ] button to select the list to play
3 Press
and then press the [ USER/ MENU] button.
■
The files in the playlist will start playing.
Chapter 3. Listening to Music/FM Radio User Button Custom Function
and hold the [ USER/
1 Press
to move to the Menu screen.
35
Listening to Music
User Button Custom Function (Continued)
To find the desired music with the navigation function
1 Set the User Button Mode to <Navigation>.
the [ USER/ MENU] button while the
2 Press
selected music is playing.
■
The file list of the folder will appear.
Press the [ lœœ ] button to move to the upper
3 folder.
the [ + , - ] button to select a folder of your
4 Press
choice.
Use the [ √√l ] button to move to the file list on the
5 selected
folder.
■
Use the [ √√l ] button to move to the lower level, the [ lœœ
] button to the upper level.
the [ + , - ] button to select a file of your
6 Press
choice.
7
Press the [
■
36
] button.
The selected file will start playing.
To set Section Repeat
the User Button Mode to <Repeat AB> and play
1 Set
a file of your choice.
the [ USER/ MENU] button at the
2 Press
beginning of the section you want to repeat.
■
The starting point is set and <A
display window.
> will appear in the screen
the [ USER/ MENU] button again to set
3 Press
the ending of the section you want to repeat.
■
<A B> will appear on the screen and the specified section
starts to play repeatedly.
To cancel Section Repeat
Press the [ USER/
■
MENU] button again during Section Repeat.
Section Repeat will be canceled.
■
NOTE
Section Repeat will be automatically canceled in the following cases.
- When the [lœœ] or [√√l] button is pressed, moving to the previous or next track.
- The starting point of the section repeat is set but the ending point is not set until the current track ends.
Chapter 3. Listening to Music/FM Radio User Button Custom Function
This function enables you to listen to specific parts of a
track repeatedly. Recommended for language learning.
37
Listening to Music
User Button Custom Function (Continued)
To use the DNSe button
Set the User Button Mode to <DNSe> and press the [ USER/
■
MENU] button.
DNSe mode changes in the following order each time the button is pressed <NORMAL> <ROCK>
<HOUSE> <JAZZ> <DANCE> <BALLAD> <R&B> <CLASSICAL> <USER EQ> <3D USER>
<3D STUDIO> <3D STAGE> <3D CLUB>.
To use the Play Speed button
Set the User Button Mode to <Play Speed> and press the [ USER/
■
MENU] button.
Playback speed changes in the following order each time the button is pressed <x0.7> <x0.8>
<x0.9> <x1.0> <x1.1> <x1.2> <x1.3>.
To use the Play Mode button
Set the User Button Mode to <Play Mode> and press the [ USER/
■
38
MENU] button.
Playback mode changes in the following order each time the button is pressed <Normal>
<Repeat One> <Repeat All> <Shuffle All>.
Listening to FM Radio
Listening to FM Radio
Before you start!
Connect your earphones to the player and turn the power on and check the
battery status.
and hold the [ USER/
1 Press
to move to the menu screen.
MENU] button
■
FM radio reception will start.
To automatically search for frequencies
the [ USER/
1 Press
<Manual Mode>.
The <PRESET> message will disappear from the screen display and go into manual mode.
and hold the [ lœœ ] or [ √√l] button and then
2 Press
release.
■
The frequency nearest from the point the button is
released will be searched.
To manually search for frequencies
the [ USER/
1 Press
<Manual Mode>.
■
MENU] button and select
The <PRESET> message will disappear from the screen display and go into manual mode.
2 Press the [ lœœ ] or [ √√l] button.
■
Moves to frequencies whenever the button is pressed.
Listening to FM Radio
■
MENU] button and select
Chapter 3. Listening to Music/FM Radio User Button Custom Function/
the [ + , - ] button to select <FM Radio>
2 Press
and then press the [ USER/ MENU] button.
39
Listening to FM Radio
Setting a Frequency
Up to 20 frequencies can be stored.
To automatically set frequencies
and hold the [ USER/ MENU] button
1 Press
to move to the menu screen.
the [ + , - ] button to select <Settings> and
2 Press
then press the [ USER/ MENU] button.
■
3
■
4
The FM Radio menu appears.
Press the [ + , - ] button to select the <Auto Preset>
and then press the [ USER/ MENU] button.
■
5
The Settings menu appears.
Press the [ + , - ] button to select the <FM Radio>
and then press the [ USER/ MENU] button.
The Auto Preset Confirm window will appear.
Press the [ + , - ] button to select the <Yes> and
then press the [ USER/ MENU] button.
■
The <AUTO> message will appear and frequencies are
automatically set between 1~20.
To cancel during setting
To cancel setting during <Auto Preset> setting, press the [ lœœ ] or [ √√l] button.
■
The auto preset setting is canceled and frequencies set up to then are stored.
NOTE
40
CAUTION
■
To set <Auto Preset> again after setting preset, existing frequencies are deleted entirely and you can reset from start.
■
Always connect your earphones to the player when searching or setting frequencies. The earphones are
used as antennas to receive FM radio reception.
To manually set frequencies
the [ USER/
1 Press
<Manual Mode>.
The <PRESET> message will disappear from the
screen display and go into manual mode.
Press the [ lœœ ] or [ √√l] button to search for
2 frequencies
to set in preset.
3 Press the [
■
] button.
The <Saved?> message will appear.
Press the [ lœœ ] or [ √√l] button to specify numbers
4 and
then press the [ USER/ MENU] button.
■
The <SAVED!!> message will appear and the selected
frequency is set to the specified preset number.
To search for frequencies in PRESET mode
the [ USER/
1 Press
<Preset Mode>.
■
MENU] button and select
Chapter 3. Listening to Music/FM Radio Setting a Frequency
■
MENU] button and select
The <PRESET> message will appear on the screen
display and go into preset mode.
2 Press the [ lœœ ] or [ √√l] button.
■
The preset number is selected and you can listen to the
stored radio frequency.
41
Listening to FM Radio
To Delete Presets
Before you start!
■
Follow the steps below to delete frequencies while listening to FM radio.
1 Press the [
■
] button and select <Preset Mode>.
The <PRESET> message will appear on the screen display and go into the preset mode.
Press the lœœ ] or [ √√l] button to search for
2 frequencies
to delete in preset.
3 Press the [
■
USER/
] button.
The <Delete?> message will appear.
Press the lœœ ] or [ √√l] button to select <Y> and
4 then
press the [ ] button.
42
■
The <DELETED!!> message will appear and the selected
preset number is deleted.
■
To cancel preset number delete, select <N>.
Listening to FM Radio
Setting FM Radio
To set FM region
MENU] button
the [ + , - ] button to select <Settings>
2 Press
and then press the [ USER/ MENU] button.
■
The Settings menu appears.
the [ + , - ] button to select the <FM Radio>
3 Press
and then press the [ USER/ MENU] button.
■
The FM Radio menu appears.
■
The FM Region menu appears.
the [ + , - ] button to select the FM region
5 Press
and then press the [ USER/ MENU] button.
■
You can select from <Korea/USA> <Japan>
<Other Countries> .
■
Frequency range by region
- Korea/USA: Search for FM frequencies in 100 kHz players between 87.5 MHz~108.0 MHz.
- Japan: Search for FM frequencies in 100 kHz players between 76.0 MHz~108.0 MHz.
- Other Countries: Search for FM frequencies in 50 kHz players between 87.50 MHz~108.00 MHz.
■
FM region can be deleted or changed according to the target region of the player.
■
If you change the FM region, the previously stored radio frequencies are removed.
NOTE
To Delete Presets
the [ + , - ] button to select the <FM Region>
4 Press
and then press the [ USER/ MENU] button.
Chapter 3. Listening to Music/FM Radio Setting FM Radio/
and hold the [ USER/
1 Press
to move to the menu screen.
43
Listening to FM Radio
Setting FM Radio (Continued)
To set FM reception
and hold the [ USER/
1 Press
to move to the menu screen.
MENU] button
the [ + , - ] button to select <Settings>
2 Press
and then press the [ USER/ MENU] button.
■
The Settings menu appears.
the [ + , - ] button to select the <FM Radio>
3 Press
and then press the [ USER/ MENU] button.
■
The FM Radio menu appears.
the [ + , - ] button to select the <FM Search Level>
4 Press
and then press the [ USER/ MENU] button.
■
The FM Search Level menu appears.
the [ + , - ] button to select the search level
5 Press
and then press the [ USER/ MENU] button.
44
■
You can select from <High> <Middle> and <Low>.
■
The higher FM search level is, the more frequencies can
be received.
Chapter 4. Settings
Settings .......................................................46
Setting Music .............................................46
Setting Time...............................................48
Setting the Display.....................................49
Setting Language ......................................50
Setting the System ....................................51
Settings
Setting Music
You can set detailed settings for music playback.
and hold the [ USER/
1 Press
move to the menu screen.
MENU] button to
the [ + , - ] button to select <Settings>
2 Press
and then press the [ USER/ MENU] button.
■
The Settings menu appears.
the [ + , - ] button to select the <Music>
3 Press
and then press the [ USER/ MENU] button.
■
The Music menu appears.
the [ + , - ] and [ USER/
4 Use
set necessary functions.
■
Button functions to use during setting.
- Press the [lœœ] button to move to the previous item.
- Press the [√√l] button to move to the next item.
- Press the [+, -] button to move up or down through the current menu.
- Press the [ USER/ MENU] button to select or save the menu.
■
If there is no button operation during about 30 seconds in the Settings screen, settings will be canceled
and returned to through previous function.
NOTE
46
MENU] buttons to
■
<3D User Set> : Sets 3D sound effect and bass enhancement. 3D can be set between
00~05 levels, and Bass Enhance between 00~03 levels. To use 3D User Set, select
<3D-User> from <DNSe>.
■
<User EQ Set> : Directly select a sound effect (EQ). To use User EQ, select <User EQ>
from <DNSe>.
■
<Play Mode> : Select playback mode such as repeat settings. Select from <Normal>
<Repeat One> <Repeat All> <Shuffle All> and <Intro>.
■
<Play Speed> : Adjust the playback speed of music/voice recording. Select either <x0.7>
<x0.8> <x0.9> <x1.0> <x1.1> <x1.2> or <x1.3>. (The higher the number is, the faster the
playback speed is.)
■
<Skip Interval> : Set the playback interval when you press the [ lœœ ] or [√√l] button during
playback. Select either <1 Track> <03 Sec> <05 Sec> <07 Sec> <10 Sec> <30 Sec> or
<01 Min>.
■
<Search Speed> : Set the search speed when you press and hold the [ lœœ ] or [√√l]
button during playback. Select either <01 Sec> <03 Sec> <05 Sec> <10 Sec> <15 Sec>
<20 Sec> <30 Sec> or <01 Min>.
■
<Intro Time> : When you select the Intro function from <Play Mode>, the beginning of all
files will be played back for the seconds you set. Select either <10 Sec> <20 Sec> <30 Sec>
or <60 Sec>.
NOTE
■
For a VBR or Ogg file, the Skip Interval and Serach Speed may not be exact.
■
What is DNSe?
Setting Music
<DNSe> : You can select a suitable sound for each music genre. Select either <3D-User>
<3D-Studio> <3D-Stage> <3D-Club> <Normal> <Rock> <House> <Jazz> <Dance> <Ballad>
<R&B> <Classical> or <User EQ>.
Chapter 4. Settings
■
DNSe is a sound effect function for MP3 players developed by Samsung and consists of 3D.
The 3D adds a stereophonic sound effect to the music.
47
Settings
Setting Time
You can set functions related to the Sleep Timer and Auto Power Off.
Press and hold the [ USER/
1 move
to the menu screen.
MENU] button to
the [ + , - ] button to select <Settings> and
2 Press
then press the [ USER/ MENU] button.
■
The Settings menu appears.
the [ + , - ] button to select the <Time> and
3 Press
then press the [ USER/ MENU] button.
■
The Time menu appears.
Use the [ + , - ] and [ USER/
4 set
necessary functions.
MENU] buttons to
■
<Time Set> : Current Time Setup: You can set current date and time.
■
<Sleep> : Turns off power automatically after the preset time.
Select either <Off> <15 Min > <30 Min> <60 Min> <90 Min> or <120 Min>.
■
<Auto Power Off> : Automatically turns power off when there is no button operation after the preset time
in the pause mode. Select either <Off> <05 Sec> <10 Sec> <15 Sec> <30 Sec> <01 Min> or <03 Min>.
Time Set
48
1
Press the [ lœœ ] or [√√l] button to move to a
desired location, and then press the [ + , - ] button
to set date and time.
2
When the setup is complete, move to <OK> and
press the [ USER/ MENU] button.
■
Current time setup is complete.
Settings
Setting the Display
You can set functions related to scrolling, backlight and other
screen display.
and hold the [ USER/
1 Press
move to the menu screen.
MENU] button to
the [ + , - ] button to select <Settings> and
2 Press
then press the [ USER/ MENU] button.
■
The Settings menu appears.
■
The Display menu appears.
[ + , - ] and [ USER/
4 toUsesetthenecessary
functions.
MENU] buttons
<Scroll Speed> : Sets the scroll speed to adjust the speed of the track title movement. Select from
<Slow> <Normal> and <Fast>.
■
<Backlight Time> : Sets to automatically turn off the backlight after there is no button operation
during the preset time. Select either <05 Sec> <15 Sec> <30 Sec> <60 Sec> or <Always On>.
■
<Contrast> : Adjusts the brightness of the screen display window. Select from 00 to 10.
■
<Tag> : View track information for music files with the ID3 Tag. Select either <On> or <Off>.
■
<Display Time> : Check the time in the desired format during music playback. Select either
<Play Time> <Remain Time> or <Total Time>.
■
<Screen Saver Term> : You can set the clock to show up in the screen display window and then
disappear when there is no button activity during the preset time.
Select either <Off> <05 Sec> <10 Sec> <30 Sec> <01 Min> <05 Min> <10 Min> or <Always On>.
Setting Time/
Setting the Display
■
Chapter 4. Settings
the [ + , - ] button to select the <Display>
3 Press
and then press the [ USER/ MENU] button.
49
Settings
Setting Language
Set the language for the menu and track information <ID3-Tag>.
and hold the [ USER/
1 Press
move to the menu screen.
MENU] button to
the [ + , - ] button to select <Settings>
2 Press
and then press the [ USER/ MENU] button.
■
The Settings menu appears.
the [ + , - ] button to select the <Language>
3 Press
and then press the [ USER/ MENU] button.
■
The Language menu appears.
the [ + , - ] and [ USER/
4 Use
set necessary functions.
MENU] buttons to
■
<Menu> : Set the menu language. Select from <Chinese(S)> <Chinese(T)> <Dutch> <English>
<French> <German> <Hungarian> <Italian> <Japanese> <Korean> <Polish> <Portuguese>
<Russian> <Spanish> and <Swedish>.
■
<ID3-Tag> : Set the track information language.Select from <Afrikaans> <Basque> <Catalan>
<Chinese(S)> <Chinese(T)> <Czech> <Danish> <Dutch> <English> <Estonian> <Finnish>
<French> <German> <Greek> <Hrvatski> <Hungarian> <Icelandic> <Italian> <Japanese>
<Korean> <Norwegian> <Polish> <Portuguese> <Romany> <Russian> <Slovak> <Slovene>
<Spanish> <Swedish> <Thai> <Turkish> and <Vietnamese>.
NOTE
■
The supported languages can be changed or added.
■
What is ID3-Tag?
This is what is attached to an MP3 to carry information relevant to the file, such as the title, artist, album, year,
genre and a comment field.
50
Settings
can set the Default Volume, Resume and Beep Sound
Setting the System You
functions.
Press and hold the [ USER/ MENU] button to
1 move
to the menu screen.
the [ + , - ] button to select <Settings>
2 Press
and then press the [ USER/ MENU] button.
■
The Settings menu appears.
■
The Sytem menu appears.
Use the [ + , - ] and [ USER/
4 set
necessary functions.
MENU] buttons to
<Delete File> : Search and delete files in the Navigation screen. √ Page 51
■
<Resume> : Specifies the starting point to restart playback after the music you are listening to
is stopped. If set to <Off>, the last file listened to will play from the beginning. If set to <On>, the
last file listened to will play from the point where last played.
■
<Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
■
<Default Vol> : The default volume can be set 00 to 30(Max). If the power is turned on again
after adjusting the volume above the default volume, music is played at default volume.
If the power is turned on again after the volume was set within the default volume, the music is
played at the previously played volume.
■
<Default Set> : Returns all settings to the default value. √ Page 51
■
<About> : Checks the firmware version, number of stored files, remaining memory.
■
Setting Language/
Setting the System
■
Chapter 4. Settings
the [ + , - ] button to select the <System>
3 Press
and then press the [ USER/ MENU] button.
Regarding the Built-In Memory
NOTE The actual built-in memory available is slightly less than indicated as the internal firmware uses a portion
of the memory.
51
Settings
Setting the System (Continued)
To Delete a File
1
2
3
Press the [ lœœ ] button to move to the upper folder.
Press the [ + , - ] button to select a folder of your choice.
Use the [ √√l] button to move to the file list of
selected folder.
■
Use the [√√l] button to move to the lower level, the [ lœœ ]
button to the upper level.
4
Press the [ + , - ] button to select a file to delete and
then press the [ USER/ MENU] button.
5
Press the [ + , - ] button to select <Confirm> and then
press the [ USER/ MENU] button.
■
The selected file will be deleted.
■
CAUTION
Files cannot be restored after they are deleted. Please check
before deleting files.
Default Settings
Press the [ + , - ] button to select either <Yes> or <No>
and then press the [ USER/ MENU] button.
52
■
<Yes> : Initializes all settings to default.
■
<No> : Cancels default settings.
Chapter 5. Troubleshooting
System Reset.............................................54
Troubleshooting ........................................55
System Reset
If a product malfunction occurs, you can re-initialize the system by
pressing the Reset hole.
Reset hole
Press the Reset hole at the bottom of the product with a pointed object such as
a safety clip.
54
■
The system will be initialized.
■
The Reset function will not delete data stored in the built-in memory.
is experienced, check the following.
Troubleshooting IfIf athemalfunction
problem persists, contact a Samsung Service Center near you.
Check points & Troubleshooting
Problem
Power will not turn on.
■
■
■
Buttons do not work.
■
■
■
Power is turning off.
If set to <Backlight Time> in <Settings> ➝ <Display> the screen
may be turned off. Press any button to turn the screen back on.
The screen may not be visible under direct sunlight.
The power is automatically turned off when the battery is fully
discharged. Recharge the battery.
■
■
The battery life may vary, depending on the settings of EQ and
LCD.
Product life may be shortened when left for extended periods in
low or high temperatures.
System Reset/
Troubleshooting
Battery life differs from
the Manual.
Check if the [HOLD] switch is in the direction of the arrow position.
Check if you pressed the right button, then press again.
Press the Reset hole.
Chapter 5. Troubleshooting
■
The screen will not turn on.
Power will not turn on if the battery is fully discharged.
Recharge the battery and turn the power on again.
Press the Reset hole.
55
Troubleshooting (Continued)
Check points & Troubleshooting
Problem
Playing is disabled.
■
■
■
■
File upload is disabled.
■
■
56
Check if the available file has been saved in the memory.
Check if the music file is damaged.
Check if there is enough battery power.
Check to see if the USB ccable is properly connected and
reconnect it.
Check if the memory is full.
Press the Reset hole.
Files or Data are Missing.
Check if the USB cable has been disconnected during file or data
transmission. If this is the case, it may cause serious damage not
only to files/data but also to the product.You have to be extra
cautious as Samsung is not held responsible for data loss.
Abnormal Play Time
Display during Play.
Check if the file is in VBR (Variable Bit Rate) format.
Abnormal Display of
File Name.
Move to <Settings> ➝ <Language> ➝ <ID3-Tag>
in the Menu screen and set an appropriate language.
Check points & Troubleshooting
Problem
Program Malfunction
Please check if the PC requirements are met.
■
Connection to a PC is
disabled.
The product is hot.
■
■
Check the backlight time.
Check the battery.
Heat may be generated during recharging. This has no effect on
the product life or functions.
Chapter 5. Troubleshooting
The backlight does not
turn on.
■
(For Windows 98SE) Check if the USB driver is installed and
install the driver if the program is not installed.
(For Windows ME/2000/XP) Press <Start> on the desktop and
run Windows Update. Select critical updates and service packs
and start update. Restart your PC and reconnect the player.
Troubleshooting
57
Chapter 6.
Appendix
Menu Tree ...................................................59
Manual USB Driver Installation..............60
Product Specifications ............................63
License ........................................................64
Contact SAMSUNG WORLD WIDE ........66
Menu Tree You can quickly view the menu structure.
Menu Select Screen
Music
Navigation
Playlist
FM Radio
Settings
User Button Mode
FM Radio
Time
Display
Language
System
Navigation
Auto Preset
Time Set
Scroll Speed
Menu
Delete File
FM Region
Sleep
Backlight Time
ID3-Tag
Resume
Repeat AB
DNSe
Play Mode
Play Speed
Play Speed
Play Mode
Skip Interval
FM Search Level Auto Power Off
Contrast
Beep
Tag
Default Vol
Display Time
Default Set
Screen Saver Term
About
Menu Tree
3D User Set
User EQ Set
Chapter 6. Appendix
Music
DNSe
Search Speed
Intro Time
59
Install the USB driver manually if it could
be installed automatically or an error
Manual USB Driver Installation not
occurred during installation.
Before you start!
■
Insert the installation CD in the CD-ROM drive.
If an error occurs during installation of the USB driver
the device manager.
1 Check
Windows 98SE/ME: Control Panel
➝
System➝ Device Manager
Windows 2000 / XP: Control Panel➝
System➝ Hardware➝ Device Manager
if there is a device listed with an
2 Check
exclamation point or a question mark
(displayed as unknown device or
USB device).
click on the device listed with an
3 Double
exclamation point or a question mark.
■
If you are using Windows 2000 and your version of Windows does not recognize the USB driver please
download and install the latest service pack from windowsupdate.microsoft.com
■
The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
■
If errors occur continuously when you install the USB driver, reconnect the USB cable after
rebooting your system.
NOTE
60
selecting the driver,
4 After
click [Reinstall Driver].
5 Click [Next].
Next >
Next >
Next >
Manual USB Driver Installation
[Search for a suitable driver
6 Select
7 Click [Next] to finish.
for my device] and then click [Next].
Chapter 6. Appendix
Reinstall Driver
61
Manual USB Driver Installation (Continued)
In Windows 98SE
Follow the instructions in the window to complete the installation.
YP-F2
Next >
Next >
\USB Driver\win98 USB
Next >
Next >
Finish
USB driver location
[CD-ROM] \USB Driver\win98 USB
You must reboot your computer to complete the installation.
■
62
NOTE
You cannot use it as a removable disc in Windows 98SE if the YP-F2 program is not installed.
Make sure to install the USB driver file first.
Product Specifications
Model Name
Power
YP-F2
3.7V (Li-Polymer Rechargeable)
Built-in Battery Power
250mAh
Built-in Memory capacity
512MB(YP-F2 X), 1GB(YP-F2 Z), 2GB(YP-F2 Q)
File
Compatibility
Supported Number of Files and folders
Output Frequency Range
Noise Ratio
Play Time
Temperature Range for Operation
File: Max. 2000 Folder: Max. 200
20mW(France 5mW/CH)(16Ω)
20Hz~20KHz
90dB with 20KHz LPF(based on 1KHz 0dB)
12 hours of music play (MP3 128kbps, Volume 20, Normal sound mode)
- 5~35°C (23~95°F)
Case
Plastic
Weight
20.5g
28.1 X 52.5 X 15.5 mm
Dimension(WxHxD)
Manual USB Driver Installation/
Product Specifications
● The contents of this Manual are subject to change without prior notice for further
improvement.
Chapter 6. Appendix
Earphone Output
MPEG1/2/2.5 Layer3(8kbps~320kbps, 8kHz~48kHz)
WMA, ASF(48kbps~192kbps,8kHz~48kHz), Ogg(Q0~Q9)
63
License
The product player accompanying this user manual is licensed under certain intellectual
property rights of certain third parties. This license is limited to private non-commercial use by
end-user consumers for licensed contents. No rights are granted for commercial use.
The license does not cover any product player other than this product player and the license
does not extend to any unlicensed product player or process conforming to ISO/IEC 11172-3
or ISO/IEC 13818-3 used or sold in combination with this product player. The license only
covers the use of this product player to encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
64
EUROPE ONLY
Chapter 6. Appendix
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
License
65
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
66
Customer Care Center
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (0,15€/min)
01805 - 121213 (€ 0,12/Min)
Web Site
www.samsung.ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.fr
www.samsung.de
Country
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Customer Care Center
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88
231 627 22
0 801 801 881
808 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858 , 010- 6475 1880
2862 6001
3030 82821600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232 / 02-689-3232
0800-329-999
1 800 588 889
0860 726786 (SAMSUNG)
800SAMSUNG (7267864)
Web Site
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.co.uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
67
REV 0.0