advertisement
Eee PC
User’s Manual
Windows® XP Edition
Eee PC 901 Series
E4238
ANT
ii
Table of Contents
Chapter 1:
Introducing the Eee PC
Chapter 2
Knowing the Parts
Chapter 3
Getting Started
Emergency Shutdown & Reset ................................................................ 3-7
Enabling and Disabling Devices ............................................................3-18
Adjusting the display resolution ...........................................................3-19
Table of Contents
Table of Contents
Chapter 4
Using the Eee PC
Configuring a wireless network connection ....................................... 4-2
Configuring a network connection ........................................................ 4-4
Updating the BIOS through the Internet ...........................................4-11
Updating the BIOS through a BIOS file ...............................................4-13
Super Hybrid Engine Modes ...................................................................4-17
Chapter 5
Support DVD & System Recovery
Appendix
Declarations and Safety Statements .......................................................A-2
ASUS Eee PC iii
iv Table of Contents
About This User’s Manual
Notes for This Manual
Safety Precautions
Preparing Your Eee PC
About This User’s Manual
You are reading the Eee PC User’s Manual. This User’s Manual provides information regarding the various components in the Eee
PC and how to use them. The following are major sections of this
User’s Manual:
1. Introducing the Eee PC
Introduces the Eee PC and this User’s Manual.
2. Knowing the Parts
Provides information on the Eee PC’s components.
3. Getting Started
Provides information on getting started with the Eee PC.
4. Using the Eee PC
Provides information on using the Eee PC’s utilities.
5. Support DVD and System Recovery
Gives you information on support DVD contents and system recovery.
6. Appendix
Gives you safety statements.
There may be differences between your Eee PC and the drawings shown in this manual. Please accept your Eee PC as being correct.
1-2 Chapter 1: Introducing the Eee PC
Notes for This Manual
A few notes and warnings are used throughout this guide, allowing you to complete certain tasks safely and effectively. These notes have different degrees of importance as follows:
WARNING! Important information that must be followed for safe operation.
IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.
TIP: Tips for completing tasks.
NOTE: Information for special situations.
ASUS Eee PC 1-3
1-4
Safety Precautions
The following safety precautions will increase the life of the Eee
PC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners, benzene, or other chemicals on or near the surface.
Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Eee PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.
DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
DO NOT place or drop objects on top and do not shove any foreign objects into the Eee PC.
DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
DO NOT expose to strong magnetic or electrical fields.
DO NOT press or touch the display panel. Do not place together with small items that may scratch or enter the
Eee PC.
DO NOT leave the Eee PC on your lap or any part of the body to prevent discomfort or injury from heat exposure.
DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
Battery safety warning: DO
NOT throw the battery in fire. DO NOT short circuit the contacts. DO NOT disassemble the battery.
Chapter 1: Introducing the Eee PC
SAFE TEMP: This Eee PC should only be used in environments with ambient temperatures between 5°C
(41°F) and 35°C (95°F)
DO NOT carry or cover a
Eee PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.
INPUT RATING: Refer to the rating label on the bottom of the Eee PC and be sure that your power adapter complies with the rating.
Incorrect installation of battery may cause explosion and damage the Eee PC.
DO NOT throw the Eee PC in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
ASUS Eee PC 1-5
1-6
Transportation Precautions
To prepare the Eee PC for transport, you should close the display panel to protect the keyboard and display panel.
The Eee PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape surfaces when transporting your Eee PC.
You can put your Eee PC in a carrying case for protection from dirt, water, shock, and scratches.
Charging Your Batteries
If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the
Eee PC is in use.
Remember to fully charge the battery (8 hours or more) before first use and whenever it is depleted to prolong battery life. The battery reaches its maximmum capacity after a few full charging and discharging cycles.
Airplane Precautions
Contact your airline if you want to use the Eee PC on the airplane.
Most airlines have restrictions for using electronic devices. Most airlines allow electronic use only between and not during takeoffs and landings.
There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Eee PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Eee PC or diskettes through airport magnetic detectors or expose them to magnetic wands.
Chapter 1: Introducing the Eee PC
2
1
3
Preparing your Eee PC
These are only quick instructions for using your Eee PC. Read the following chapters for detailed information.
1. Install the battery pack
3
1
2
2. Connect the AC power adapter
ASUS Eee PC
Your Eee PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Eee PC.
Remember to fully charge the battery (8 hours or more) before first use and whenever it is depleted to prolong battery life. The battery reaches its maximum capacity after a few full charging and discharging cycles.
1-7
1.3
MEGA
PIXELS
3. Open the display panel
4. Turn ON the Eee PC
1.3
MEGA
PIXELS
1-8
When you open the display panel, do not force it down to the table or else the hinges may break! Never lift the Eee PC by the display panel!
Chapter 1: Introducing the Eee PC
Top Side
Bottom Side
Right Side
Left Side
Rear Side
Top Side
Refer to the illustration below to identify the components on this side of the Eee PC.
The top side may vary in appearance depending on model.
1
2
3
4
5
2-2
6
7
8
The keyboard differs for each territory.
Chapter 2: Knowing the Parts
1
2
3
4
Built-in Camera
The built-in camera allows picture taking or video recording.
Display Panel
The display panel functions the same as a desktop monitor.
The Eee PC uses an active matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors, the LCD panel does not produce any radiation or flickering, so it is easier on the eyes. Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.
Array Microphone (Built-in)
The built-in array microphone is more clear and echo-free compared with traditional single microphones and can be used for video conferencing, voice narrations, audio recordings, and multimedia applications.
Instant Keys
Instant keys allow you to launch frequently used applications with one push of a button.
Backlight Key
Pressing this key turns off the LCD monitor backlight.
Any action on the keyboard, mouse or touchpad will activate monitor again.
Resolution Key
The Resolution key allows you to adjust display resolution. Press this key repeatedly to switch resolution.
User-defined Key
This key is reserved for customized definition. The default definition is for Super Hybrid Engine function.
ASUS Eee PC 2-3
2-4
User-defined Key
This key is reserved for customized definition. The default definition is for launching Internet Explorer.
Only models with built-in wireless LAN and Bluetooth supoort the user-defined key for Skype.
5
6
7
8
Power Switch
The power switch allows powering ON and OFF the Eee PC and recovering from STR. Press the switch once to turn ON and hold it to turn OFF the Eee PC. The power switch only works when the display panel is opened.
Keyboard
The keyboard provides keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands.
Touchpad and Buttons
The touchpad and its buttons comprises a pointing device that provides the same functions as a desktop mouse.
Multi-finger gesture input is available to allow easy web and document navigation.
Status Indicators (front)
Power Indicator
The power indicator lights when the Eee PC is turned
ON and blinks slowly when the Eee PC is in the Saveto-RAM (Suspend) mode. This indicator is OFF when the Eee PC is turned OFF.
Chapter 2: Knowing the Parts
Battery Charge Indicator
The battery charge indicator (LED) shows the status of the battery’s power as follows:
Powered ON
AC Mode
Orange ON
Battery Mode
Green ON
Battery charge is between 100%–80%
Battery charge is between 80%–10%
Battery charge is less than 10%
Orange Blinking Slowly Green Blinking Slowly
Orange Blinking Quickly Green Blinking Quickly
Standby Mode / Powered OFF
AC Mode
Battery charge is between 100%–80%
Battery charge is between 80%–10%
Battery charge is less than 10%
Orange ON
Battery Mode
Off
Orange Blinking Slowly Off
Orange Blinking Quickly Off
The Battery Charge Indicator will not light when the battery is removed from your Eee PC.
Solid-State disk (SSD) Indicator
The solid-state disk drive indicator blinks when data is written to or read from the disk drive.
Wireless/Bluetooth Indicator
This is only applicable on models with built-in wireless
LAN/Bluetooth. When the built-in wireless LAN/Bluetooth is enabled, this indicator lights.
ASUS Eee PC 2-5
Bottom Side
Refer to the illustration below to identify the components on this side of the Eee PC.
The bottom side may vary in appearance depending on model.
1 2 3
2 1
4
5
6 6
The bottom of the Eee PC can get very hot. Be careful when handling the Eee PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. DO NOT use on soft surfaces such as beds or sofas
,which may block the vents. DO NOT PUT THE Eee PC ON YOUR
LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE
HEAT.
2-6
1 Battery Lock - Spring
The spring battery lock keeps the battery pack secure.
When the battery pack is inserted, it will automatically lock.
When removing the battery pack, this spring lock must be retained in the unlocked position.
Chapter 2: Knowing the Parts
2
3
4
5
Battery Pack
The battery pack is automatically charged when connected to an AC power source and maintains power to the Eee PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage and by the specifications for this Eee PC.
The battery pack cannot be disassembled and must be purchased as a single unit.
Battery Lock - Manual
The manual battery lock is used to keep the battery pack secured. Move the manual lock to the unlocked position to insert or remove the battery pack. Move the manual lock to the locked position after inserting the battery pack.
Solid-State Disk & Memory Compartment
The solid-state disk drive and memory are secured in a dedicated compartment.
Reset Button (Emergency)
In case your operating system cannot properly turn OFF or restart, the reset button can be depressed with a pin or a straightened paper clip to restart the Eee PC.
The reset button is available on selected models.
6 Audio Speaker System
The built-in stereo speaker system allows you to hear audio without additional attachments. The multimedia sound system features an integrated digital audio controller that produces rich, vibrant sound (results improved with external stereo headphones or speakers). Audio features are software controlled.
ASUS Eee PC 2-7
2-8
Right Side
Refer to the illustration below to identify the components on this side of the Eee PC.
1 2 3 4
1
2
3
Memory Card Slot
The built-in memory card reader can read MMC/SD cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs.
2.0
USB Port (2.0/1.1)
The USB (Universal Serial Bus) port is compatible with USB
2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, and storage devices, connected in a series up to
12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. Also, the USB supports hot-swapping function.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGAcompatible device such as a monitor or projector to allow viewing on a larger external display.
Chapter 2: Knowing the Parts
4 Power (DC) Input
The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Eee PC and charges the internal battery pack. To prevent damage to the Eee PC and battery pack, always use the supplied power adapter.
CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE
NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR
BODY.
ASUS Eee PC 2-9
Left Side
Refer to the illustration below to identify the components on this side of the Eee PC.
2-10
1 2 3 4 5
1
2
3
4
Kensington® Lock Port
The Kensington® lock port allows the Eee PC to be secured using Kensington® compatible security products. These security products usually include a metal cable and lock that prevent the Eee PC to be removed from a fixed object.
LAN Port
The eight-pin RJ-45 LAN port (10/100M bit) supports a standard Ethernet cable for connection to a local network.
The built-in connector allows convenient use without additional adapters.
2.0
USB Port (2.0/1.1)
The USB (Universal Serial Bus) port is compatible with USB
2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, and storage devices, connected in a series up to
12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plugin sites or hubs. Also, it supports hot-swapping function.
Microphone Jack
The microphone jack is designed to connect the microphone used for Skype, voice narrations, or simple audio recordings.
Chapter 2: Knowing the Parts
5
Headphone Output Jack
The 1/8” stereo headphone jack (3.55mm) connects the Eee
PC’s audio out signal to amplified speakers or headphones.
Using this jack automatically disables the built-in speakers.
Rear Side
Refer to the illustration below to identify the components on this side of the Eee PC.
1
1 Battery Pack
The battery pack is automatically charged when connected to an AC power source and maintains power to the Eee PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage and by the specifications for this Eee PC.
The battery pack cannot be disassembled and must be purchased as a single unit.
ASUS Eee PC 2-11
2-12 Chapter 2: Knowing the Parts
Power System
Touchpad Usage
Keyboard Usage
First Run Wizard
Operating Mode
Shutdown
Power System
Using AC Power
The Eee PC power comprises two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the Eee PC. Your Eee
PC comes with a universal AC-DC adapter for connection to any
100V-120V as well as 220V-240V outlets without setting switches or using power converters. Different countries may require an adapter to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to support different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages before travelling.
3-2
With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet (preferably with surge-protection) and then connect the DC plug to the Eee PC. Connecting the AC-DC adapter to the AC outlet first allows you to test the AC outlet’s power and the AC-DC converter itself for compatibility problems before connecting the DC power to the Eee PC. The power indicator on the adapter (if available) will light if the power is within accepted ranges.
Chapter 3: Getting Started
THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN
USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY
FROM YOUR BODY.
This Eee PC may come with either a two or three-prong plug depending on territory to fit your wall outlet. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Eee
PC.
Damage may occur if you use a different adapter to power the
Eee PC or use the Eee PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Eee PC with a faulty AC-DC adapter.
ASUS Eee PC 3-3
3-4
Using Battery Power
The Eee PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life. Additional battery packs are optional and can be purchased separately through an Eee PC retailer.
Remember to fully charge the battery (8 hours or more) before first use and whenever it is depleted to prolong battery life. The battery reaches its maximum capacity after a few full charging and discharging cycles.
following procedures to install the battery pack.
To install the battery pack: To remove the battery pack:
2
3
1
2 1
3
2 for use with this model or else damage may occur to the Eee PC.
The output voltage of this adapter is +12Vdc, 3A.
• Never attempt to remove the battery pack while the Eee PC is turned ON, as this may result in the loss of working data.
Chapter 3: Getting Started
Battery Care
The Eee PC’s battery pack, like all rechargeable batteries, has a limit on the number times it can be recharged. The battery pack’s useful life will depend on your environment temperature, humidity, and how your Eee PC is used. It is ideal that the battery be used in a temperature range between 5˚C and 35˚C (41˚F and 95˚F). You must also take into account that the Eee PC’s internal temperature is higher than the outside temperature. Any temperatures above or below this range will shorten the life of the battery. But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must be purchased from an authorized dealer for this
Eee PC. Because batteries also have a shelf life, it is not recommended to buy extras for storing.
For safety reasons, DO NOT throw the battery in fire, DO NOT short circuit the contacts, and DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack caused by impact, turn OFF the Eee PC and contact an authorized service center.
ASUS Eee PC 3-5
Power Mode
Your Eee PC is equipped with a smart power system. The powersaving Battery mode lowers down the CPU frequency and decreases the power consumption to maximize the battery life. The AC mode enables the CPU to run at the full speed and to obtain the best performance. When applying or removing the power adapter, the AC mode and Battery mode will be shown on the display as a reminder.
Battery Mode AC Mode
Super Hybrid Engine
Super Hybrid Engine offers different power modes. The assigned instant key toggles power savings between various power saving modes. The power saving modes control many aspects of your Eee
PC to maximize performance versus battery time. The selected mode is shown on the display.
3-6
Auto High Performance and Auto Power-Saving mode are available only when applying or removing the power adapter.
Chapter 3: Getting Started
Emergency Shutdown & Reset
In case your operating system cannot properly turn OFF or restart, there are additional ways to shutdown and reset your Eee PC:
Shutdown: Hold the power button until the system shuts down.
Reset: Press the reset button .
ASUS Eee PC
Use a pin or a straightened paper clip to press the reset button.
DO NOT use emergency shutdown/reset while data is being written or read; doing so can result in loss or destruction of your data.
The reset button is available on selected models.
3-7
3-8
Touchpad Usage
Single-finger gesture input
Clicking/Tapping - With the pointer over an item, press the left button or use your fingertip to touch the touchpad lightly, keeping your finger on the touchpad until the item is selected. The selected item will change color. The following 2 illustrations produce the same results.
Double-clicking/Double-tapping - This is a common skill for launching a program directly from the corresponding icon you select. Move the pointer over the icon you wish to execute, press the left button or tap the pad twice in rapid succession, and the system launches the corresponding program. If the interval between the clicks or taps is too long, the operation will not be executed. The following 2 illustrations produce the same results.
Chapter 3: Getting Started
Dragging - Dragging means to pick up an item and place it anywhere on the screen you wish. You can move the pointer over the item you select, and while keeping the left button depressed, moving the pointer to the desired location, then release the button.
Or, you can simply double-tap on the item and hold while dragging the item with your fingertip. The following illustrations produce the same results.
ASUS Eee PC 3-9
3-10
Multi-finger gesture input
Finger gesture
Two-finger zooming in/out
Two-finger scrolling
Applications
StarOffice Writer/Impress,
Adobe reader, Photomanager
All
Two-finger zooming in/out - Moving two fingertips apart or together on the touchpad to zoom in or zoom out. This is convenient when viewing photos or reading documents.
Zoom in
Two-finger scrolling - Use two fingertips to slide up or down on the touchpad to scroll a window up or down. If your display window includes several sub-windows, move the pointer on that pane before scrolling.
Zoom out
Chapter 3: Getting Started
Keyboard Usage
Special Function Keys
The following defines the colored hot keys on the Eee PC’s keyboard.
The colored commands can only be accessed by first pressing and holding the function key while pressing a key with a colored command. Some function icons appear in the Notification area after activation.
The Hot Key locations on the function keys may vary depending on model but the functions should remain the same. Follow the icons whenever your hot key locations do not match the manual.
zzZ Icon (F1): Places the Eee PC in suspend mode
(Save-to-RAM).
Radio Tower (F2): Wireless Models Only: Toggles the internal wireless LAN or Bluetooth (on selected models) ON or OFF with an on-screen-display.
When enabled, the corresponding wireless indicator will light.
The default setting is WLAN ON / Bluetooth OFF.
Sun Down Icon (F3): Decreases the display brightness.
Sun Up Icon (F4): Increases the display brightness.
LCD/Monitor Icons (F5): Toggles between the Eee
PC’s LCD display and an external monitor in this series: LCD Only -> CRT Only (External Monitor) ->
LCD + CRT Clone .
ASUS Eee PC 3-11
3-12
LCD + CRT Clone mode only supports a maximum resolution of
1024 x 600 pixels.
Set your Eee PC to High Performance or Super Performance mode if you want to use a higher resolution with a connected external monitor.
Connect an external monitor before booting up the Eee PC.
Task Manager Icon (F6): Initiates the Task Manager to view the application process or terminates applications.
Crossed Speaker Icon (F7): Mutes the speaker.
Speaker Down Icon (F8): Decreases speaker volume.
Speaker Up Icon (F9): Increases the speaker volume.
Num Lk (F11): Toggles the numeric keypad (number lock) ON and OFF. Allows use of a larger portion of the keyboard for number entering.
Scr Lk (F12): Toggles the “Scroll Lock” ON and
OFF. Allows you to use a larger portion of the keyboard for cell navigation.
Prt Sc (Ins): Toggles the “Print Screen” key to initiate screen capture utility to capture, save, or print the contents of entire desktop.
Pg Up (
↑
): Press to scroll up in documents or the web browser.
Chapter 3: Getting Started
Pg Dn (
↓
): Press to scroll down in documents or the web browser.
Home (
←
): Press to move the pointer to the beginning of the line.
End (
→
): Press to move the pointer to the end of the line.
Windows icon: Displays the start menu.
Menu with pointer icon : Activates the properties menu and is equivalent to right-clicking the touchpad/mouse on an object.
ASUS Eee PC 3-13
3-14
First-time Startup
For the first time you start your Eee PC, the Windows wizard will launch automatically and lead you through setting up your preferences and some basic information.
Follow the wizard instructions to finish the initialization:
1. The Welcome message appears. Click Next to continue.
2. Select you system settings by specifying the region you are in, the language you use and the keyboard type you use. Click Next to continue.
Chapter 3: Getting Started
3 Select the time zone you are in and click Next to continue.
4. Read the end user license agreement and click Yes, I accept.
Click Next to continue.
ASUS Eee PC 3-15
5. Click Help protect my PC by turning on Automatic Updates
now to get the latest important updates and click Next to continue.
6. Type your computer’s name in the Computer name box and click Next to continue.
3-16
7. Follow the on-screen instructions to register with Microsoft and finish the initialization.
Chapter 3: Getting Started
Desktop
The are several shortcuts on the desktop. Double-click them to launch the corresponding applications and enter the specified folders. Some applications would form minimized icons in the
Notification area.
ASUS Eee PC 3-17
ASUS EeePC Tray Utility
The preloaded ASUS EeePC Tray utility allows you to turn off some devices to minimize the power consumption and helps you adjust the display resolution easily.
Enabling and Disabling Devices
To disable or enable devices
1. Right-click the ASUS EeePC Tray Utility icon in the Notification area and the utility shows the available options:
Disable WLAN: Turns on and off the wireless LAN connection.
Disable Blue Tooth: Turns on and off the Bluetooth connection.
Disable Camera: Enable or disable the built-in camera.
3-18
2. Select an option to turn it on or off based on your needs. The unavailable options are dimmed.
Chapter 3: Getting Started
Adjusting the display resolution
Click the ASUS EeePC Tray Utility icon in the Notification area to adjust the display resolution. Select the resolution based on your needs.
The CRT-related options are unavailable when there is no connected external monitors.
When you select LCD 1024 x 768, move the pointer to scroll up and down the screen.
Scroll up to see the top of the screen..
Scroll down to see the bottom of the screen.
ASUS Eee PC
You need not scroll up and down the screen when you select
LCD Compress Mode.
When the display mode of your Eee PC is CRT Only and the power mode is Power Saving, DO NOT use a resolution higher than 1024 x 600 pixels. Doing so would make the connected external monitor function abnormally.
3-19
Shutdown
Do the following instructions to turn down your Eee PC.
1. Click the start button to display the start menu.
2. Click Turn Off Computer.
3-20
2
1
3. Select Turn Off to power off your Eee PC.
3
Chapter 3: Getting Started
Network Connection
ASUS Update
Bluetooth Connection
ASUS Instant Key
Super Hybrid Engine
3.5G Data Connection
4-2
Network Connection
Configuring a wireless network connection
1. Double-click the crossed wireless network icon in the
Notification area.
If the wireless connection icon does not show in the Notification area. Activate the wireless LAN function by pressing +
(<Fn> + <F2>) before configuring a wireless network connection.
2. Select the wireless access point you want to connect to from the list and click
Connect to build the connection.
If you cannot find the desired access point, click Refresh
network list in the left pane and search in the list again.
3. When connecting, you may have to enter a password.
Chapter 4: Using the Eee PC
4. After a connection has been established, the connection is shown on the list.
5. You can see the wireless network icon in the
Notification area.
The wireless connection icon disappears when you Press +
(<Fn> + <F2>) to disable the WLAN function.
ASUS Eee PC 4-3
Configuring a network connection
If you want to obtain network access, connect the network cable, with RJ-45 connectors on each end, to the network port on the Eee
PC and the other end to a hub or switch. The illustration below is the example of your Eee PC connected to a network hub or switch for use with the built-in Ethernet controller. Connect to network before enjoying all the network services and functions in Eee PC.
Network hub or switch
Network cable with RJ-45 connectors
4-4
Local Area Network
Using a dynamic IP:
1. Right-click the network icon with a yellow warning triangle in the Notification area and select Open Network
Connections.
Chapter 4: Using the Eee PC
2. Right-click Local Area
Connection and select
Properties.
3. Highlight Internet
Protocol(TCP/IP) and click Properties.
4. Click Obtain an IP
address automatically and click OK.
ASUS Eee PC 4-5
4-6
5. Click Create a new
connection to start the
New Connection Wizard.
6. Click Next.
7. Click Connect to the
Internet and click Next.
8. Click Set up my
connection manually.
Chapter 4: Using the Eee PC
9. Select your connection type and click Next.
10. Enter your ISP Name and click Next.
11. Enter your User name and
Password. Click Next.
12. Click Finish to finish the configuration.
ASUS Eee PC 4-7
13. Enter your user name and password. Click
Connect to connect to the Internet.
Contact your Internet Service Provider (ISP) if you have problems connecting to the network.
4-8 Chapter 4: Using the Eee PC
Using a static IP:
1. Repeat the step 1–3 of Using a dynamic IP to start the static
IP network configuration.
2 Click Use the following
IP address.
3. Enter the IP address, Subnet mask and Gateway from your service provider.
4. If needed, enter the preferred DNS Server address and alternative address.
5. After entering all the related values, click OK to build the network connection.
Contact your Internet Service Provider (ISP) if you have problems connecting to the network.
ASUS Eee PC 4-9
Browsing web pages
After you finish the network setup, click Internet Explorer on the desktop and start enjoying net surfing.
4-10
Visit our Eee PC homepage (http://eeepc.asus.com) to obtain the latest information and register at http://vip.asus.com for full service of your Eee PC.
Chapter 4: Using the Eee PC
ASUS Update
The ASUS Update is a utility that allows you to manage, save, and update the Eee PC BIOS in Windows® environment. The ASUS Update utility allows you to:
• Save the current BIOS file
• Download the latest BIOS file from the Internet
• Update the BIOS from an updated BIOS file
• Update the BIOS directly from the Internet, and
• View the BIOS version information.
This utility is pre-loaded in your Eee PC and is also available in the support DVD that comes with the Eee PC package.
ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP).
Updating the BIOS through the Internet
To update the BIOS through the Internet:
1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate for Eee PC>
ASUSUpdate. The ASUS Update main window appears.
ASUS Eee PC 4-11
2. Select Update BIOS from Internet from the drop-down menu, then click Next.
3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select. Click Next.
4-12 Chapter 4: Using the Eee PC
4. From the FTP site, select the desired BIOS version and click Next.
5. Follow the screen instructions to complete the update process.
The ASUS Update utility is capable of updating itself through the
Internet. Always update the utility to avail all its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate for EeePC>
ASUSUpdate. The ASUS Update main window appears.
2. Select Update BIOS from file from the drop-down menu, then click Next.
3. Locate the BIOS file from the Open window, then click Open.
4. Follow the screen instructions to complete the update process.
ASUS Eee PC 4-13
4-14
Bluetooth Connection
Bluetooth technology eliminates the need for cables for connecting
Bluetooth-enabled devices. Examples of Bluetooth-enabled devices may be Notebook PCs, Desktop PCs, mobile phones, and PDAs.
To connect to a Bluetooth-enabled device
1. Press <Fn> + <F2> repeatedly until Bluetooth ON or WLAN &
Bluetooth ON is shown.
2. Click My Bluetooth Places on the desktop and follow the onscreen instructions to finish initialization. Click Next to continue.
3. Name your Eee PC and select the device type. Click Next to continue.
4. To decide the Bluetooth services this device offers, click Next to continue.
5. Select the service you would like to offer from the list and click
Next to continue.
Chapter 4: Using the Eee PC
6. Click Next to start setting up the Bluetooth connection.
7. Select a Bluetooth-enabled device from the list and click
Next.
8. Enter the Bluetooth security code and start pairing.
9. After the paired relationship is built, select the service you are interested in from the list and click Finish to use the selected service.
ASUS Eee PC 4-15
ASUS Instant Key
ASUS Instant Key allows you customized definititons to launch frequently used applications with one touch of a button.
1. Click Start > Programs > ASUS > EeePC > EeeInstantKey.
2. Click the Change button to configure.
3. Locate and select a preferred application for the instant key and click OK.
4-16
4. Click EXIT to finish the instant key setup and repeat the previous steps to customize another instant key.
Chapter 4: Using the Eee PC
Super Hybrid Engine
Super Hybrid Engine offers different power modes. The assigned instant key toggles power savings between various power saving modes. The power saving modes control many aspects of your Eee
PC to maximize performance versus battery time. The selected mode is shown on the display.
To change the power mode
• Click start > All Programs > ASUS > EeePC >
SuperHybridEngine > SuperHybridEngine.
• Press Instant Key 3 repeatedly to switch power modes.
• Right-click the Super Hybrid
Engine icon in the Notification area, and select a preferred power mode.
Super Hybrid Engine Modes
Auto High Performance and Auto Power-Saving mode are available only when applying or removing the power adapter.
ASUS Eee PC
If your external monitor functions abnormally in Power Saving mode at a resolution of 1024 x 768 pixels or higher, press <Fn> +
<F5> repeatedly to switch the display mode to LCD Only or LCD
+ CRT Clone and reset the power mode to High Performance or Super Performance.
4-17
3.5G Data Connection
Eee PC supports 3.5G data connection. With a few easy steps of inserting the SIM card and application setting up, you can surf the
Internet at anytime, anywhere.
SIM card installation
To install the SIM card
1. Remove the battery pack from Eee PC.
2
1
3
2. Locate the SIM card slot on the top-right corner of the battery
3 pack slot. Gently insert the SIM card into the card slot with the
4-18
• The SIM card and its gold contacts are vulnerable to scratches and bending. While inserting the SIM card, ensure to keep the
SIM card at a horizontal angle to the Eee PC to prevent it from malfunction.
• Ensure to insert the SIM card until it fits completely.
3. Reinstall the battery pack.
Chapter 4: Using the Eee PC
Using data connection
Before using 3.5G data connection, ensure you have applied 3G data connection service from your Internet Service Provider (ISP).
Regulations prohibit using 3.5G data connection while in the air.
Switch off your 3.5G data connection before boarding an aircraft.
To use data connection
1. Double-click SingTel BroadBand on Mobile on the desktop.
2. Enter the PIN code of your
SIM card if prompted.
ASUS Eee PC 4-19
4-20
3. In the Mobile Partner window, click Connect to enable 3.5G data connection.
Click to show network connection statistics
Click to show Online
Help
Click to exit Mobile
Partner
Click to hide the
Mobile Partner main window
Click to enable data connection
Click to show the phonebook for adding, editing, or deleting local and SIM card contacts
Click to edit, send and receive text messages
Shows signal strength Shows upload/download rate
• The actual data connection speed vary with signal strength.
• If you click to minimize the Mobile Partner window, the application will hide and run in the background. To open the Mobile Partner window again, click on the Windows notification area.
4. To end the 3.5G data connection, click Disconnect or in the Mobile Partner window.
Chapter 4: Using the Eee PC
Support DVD
System Recovery
5
System Recovery
5-2
Support DVD information
The support DVD that comes with the Eee PC package contains the drivers, software applications, and utilities that you can install to avail all the features.
Running the support DVD
Insert the support DVD in the external optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer.
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE file to run the DVD.
The drivers and utilities bundled in the support DVD may vary by models and are subject to change without notice.
Drivers menu
The Drivers menu shows available device drivers when the system detects installed devices. Install the necessary drivers to activate the devices.
Click to go to the next page
Chapter 5: Support DVD & System Recovery
Click to go to the previous page
Utilities menu
The Utilities menu shows the applications that the Eee PC supports.
Click to go to the next page
ASUS Eee PC 5-3
Click to go to the previous page
Contact
Click the Contact tab to display the ASUS contact information.
5-4
Other information
The icons on the top right corner of the screen provide additional information on the Eee PC and the contents of the support DVD.
Click an icon to display the specified information.
System information
DVD content
Technical support
File list
Chapter 5: Support DVD & System Recovery
System Recovery
Using the Support DVD
The Support DVD includes an image of the operating system, installed on your system at the factory. The Support DVD provides a comprehensive recovery solution that quickly restores your system to its original working state, provided that your system drive is in good working order. Before using the Support DVD, copy your data files to floppy disks or to a network drive and make note of any customized configuration settings (such as network settings).
1. Connect an external optical drive to your Eee PC and insert the Support DVD into the optical drive (System needs to be powered ON).
2. Press <ESC> on bootup and the Please select boot device screen appears. Select USB:XXXXXX (may be labeled as the ODD brand name) to boot from the optical drive.
Please select boot device:
HDD:SM-ASUS-PHISON SSD
HDD:SS-ASUS-PHISON SSD
USB:XXXXXXXX
↑ and ↓ to move selection
ENTER to select boot device
3. Press any key to boot from the optical drive.
Press any key to boot from CD...
ASUS Eee PC 5-5
5-6
4. Click OK in the Recovery System for Eee PC dialog box.
5. Click Yes to start the system recovery.
You will lose all your data during the system recovery. Ensure to back up your important data before recovering your system.
6. After the system recovery is completed, eject the the Support
DVD from the optical drive and click OK to restart the Eee PC.
Chapter 5: Support DVD & System Recovery
Declarations and Safety Statements
Copyright Information
Limitation of Liability
Service and Support
A-2
Declarations and Safety Statements
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Appendix
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.
Washington DC: Office of the Federal Register, National Archives and
Records Administration, U.S. Government Printing Office.)
Declaration of Conformity
(R&TTE directive 1999/5/EC)
The following items were completed and are considered relevant and sufficient:
• Essential requirements as in [Article 3]
• Protection requirements for health and safety as in [Article 3.1a]
• Testing for electric safety according to [EN 60950]
• Protection requirements for electromagnetic compatibility in
[Article 3.1b]
• Testing for electromagnetic compatibility in [EN 301 489-1] & [EN
301]
• Testing according to [489-17]
• Effective use of the radio spectrum as in [Article 3.2]
• Radio test suites according to [EN 300 328-2]
CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
ASUS Eee PC A-3
A-4
Wireless Operation Channel for Different Domains
N. America
Japan
2.412-2.462 GHz
2.412-2.484 GHz
Europe ETSI 2.412-2.472 GHz
Ch01 through CH11
Ch01 through Ch14
Ch01 through Ch13
France Restricted Wireless Frequency Bands
Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are:
• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz
Channels 10 through 13 inclusive operate in the band 2446.6 MHz to
2483.5 MHz.
There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the 2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
• Maximum authorized power indoors is 100mW
• Maximum authorized power outdoors is 10mW
Departments in which the use of the 2400–2483.5 MHz band is permitted with an EIRP of less than 100mW indoors and less than
10mW outdoors:
01 Ain Orientales 02 Aisne 03 Allier
05 Hautes Alpes 08 Ardennes 09 Ariège
11 Aude 12 Aveyron 16 Charente
24 Dordogne
32 Gers
25 Doubs
36 Indre
41 Loir et Cher 45 Loiret
55 Meuse 58 Nièvre
26 Drôme
37 Indre et Loire
50 Manche
59 Nord
Appendix
60 Oise 61 Orne
64 Pyrénées Atlantique
63 Puy du Dôme
66 Pyrénées 67 Bas Rhin
68 Haut Rhin
71 Saône et Loire
82 Tarn et Garonne
89 Yonne
94 Val de Marne
70 Haute Saône
75 Paris
84 Vaucluse 88 Vosges
90 Territoire de Belfort
This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr)
Your WLAN Card transmits less than 100mW, but more than
10mW.
ASUS Eee PC A-5
A-6
RF Exposure information (SAR)
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO
RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The ICNIRP SAR limit for mobile devices used by the general public is 2 W/kg, GSM900 – 0.04W/Kg, GSM1800
–0.136W/Kg, and WCDMA Band I – 0.463W/Kg.
Safety information
Electronic devices
Most modern electronic equipment is shielded from RF energy.
However, certain electronic equipment may not be shielded against the RF signals from your Eee PC.
Pacemakers
The Health Industry Manufacturers’ Association recommends that a minimum separation of six (6”) inches be maintained between a phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless
Technology Research.
If you have a pacemaker:
• Always keep your mobile device more than six inches from your pacemaker when turned on.
• If you have any reason to suspect that interference is taking place, turn your mobile device off immediately.
Appendix
Other medical devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Turn your mobile device off in healthcare facilities when any regulations posted in these areas instruct you to do so.
Hospitals or healthcare facilities may be using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment added to your vehicle.
Posted facilities
Turn your phone off where posted notices so require.
Aircraft
Regulations prohibit using your mobile device while in the air. Switch off your mobile device before boarding an aircraft or turn off the wireless connections.
Blasting areas
To avoid interfering with blasting operations, turn your mobile device off when in a ‘blasting area’ or in areas posted: ‘Turn off twoway radio.’ Obey all signs and instructions.
ASUS Eee PC A-7
A-8
UL Safety Notices
Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and
105V rms, and installed or used in accordance with the National
Electrical Code (NFPA 70).
When using the Eee PC modem, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
• DO NOT use the Eee PC near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
• DO NOT use the Eee PC during an electrical storm. There may be a remote risk of electric shock from lightning.
• DO NOT use the Eee PC in the vicinity of a gas leak.
Required for UL 1642 covering primary (nonrechargeable) and secondary (rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversible chemical reaction.
• Do not dispose the Eee PC battery pack in a fire, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to fire or explosion.
• Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only UL certified power adapters or batteries supplied by the manufacturer or authorized retailers.
Appendix
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to:
H05VV-F, 3G, 0.75mm
2 or H05VV-F, 2G, 0.75mm
2 .
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercurycontaining button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
ASUS Eee PC A-9
A-10
Nordic Lithium Cautions (for lithium-ion batteries)
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English)
ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
(Italian)
VORSICHT! Explosionsgefahr bei unsachgemäßen
Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen
Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Danish)
VARNING! Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. (Swedish)
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)
Appendix
ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mêre type ou d’ un type équivalent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du fabricant. (French)
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner.
(Norwegian)
(Japanese)
ASUS Eee PC A-11
A-12
Copyright Information
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of
ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,
LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL
OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL
ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT
TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT
BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES
THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.
Appendix
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS.
In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty
Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF
THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR
DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA;
OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY
ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS
OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS
INFORMED OF THEIR POSSIBILITY.
Service and Support
Visit our multi-language web site at http://support.asus.com
ASUS Eee PC A-13
A-14
Declaration of Conformity
We, Manufacturer/Importer
(full address)
ASUS COMPUTER GmbH HARKORT STR. 25
40880 RATINGEN, BRD. GERMANY declare that the product
( description of the apparatus, system, installation to which it refers) is in conformity with
(reference to the specification under which conformity is declared) in accordance with 2004/108/EC-EMC Directive and 1995/5 EC-R &TTE Directive
Product name: Eee PC
Model name : Eee PC 901
EN 50392 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz-300GHz)
EN 61000-3-2*
EN 61000-3-3*
Disturbances in supply systems caused
Disturbances in supply systems caused
EN 50360
EN 50361
EN 301893 t he limitation of exposure of the general public to electromagnetic network equipment fields
(0 Hz to 300 GHz) International Commission on
Non-Ionizing Radiation Protection (1998),
Guidelines for limiting exposure in time-varying electric, magnetic ,and electromagnetic fields ʳ
EN 300328
EN50081-1 Generic emission standard Part 1: Residual, commercial and light industry
EN50082-2
Generic immunity standard Part 2: Industrial environment
EN 55020
EN 55022
EN 55024
EN 55013
Immunity from radio interference of broadcast receivers and associated equipment
Limits and methods of measurement of radio disturbance characteristics of information technology equipment
Information Technology equipment-Immunity characteristics-Limits and methods of measurement
Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment
EN 50385 Product standard to demonstrate the compliances or radio Base stations and fixed terminal stations for wireless telecommunication systems with the basic restriction or the reference level to human exposure to radio frequency electromagnetic) field (110MHZ-
40GHZ) -General public
EN 300386
Electromagnetic compatibility and Radio spectrum
Matters (ERM);Telecommunication Electromagnetic
Compatibility (EMC) requirements
CE marking
EN300440-1
EN300440 -2
EN 301511
EN 301 908-1
EN 301489 -1
EN 301489 -17
Broadband Radio Access Networks (BRAN); 5
GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); wideband transmission equipment operating in the
2.4GHz ISM band and using spread spectrum modulation techniques. Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices
(SRD);Radio equipment to be used in the 1
GHz to 40 GHz frequency range; Part 1:
Technical characteristics and test methods
Part 2: Harmonized EN under article 3.2 of the
R&TTE Directive
Global System for Mobile communications
(GSM);Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the
R&TTE directive (1999/5/EC)
Electromagnetic compatibility and Radio spectrum Matters (ERM);Base Stations (BS),
Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and services; Part 17: Specific conditions for wideband data and HIPERLAN equipment, Part1: Common technical requirements
EN 60065
(EC conformity marking)
The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 2006/95/EC
Safety requirements for mains operated electronic and related apparatus for including electrical business equipment household and similar general use
EN 60950-1
Manufacturer/Importer
Safety for information technology equipment
(Stamp)
Date : Jul. 28 , 2008
Appendix
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Netbook Black
- Intel Pentium Mobile N270 1.6 GHz
- 22.6 cm (8.9") 1024 x 600 pixels 5:3
- 1 GB
- Lithium-Ion (Li-Ion)
- Windows XP Home Edition