Sharp DV-SR45U Operating instructions

Before you start
DVD RECORDER
Connections
DV-SR45U
Getting started
OPERATION MANUAL
Please read this Operation Manual carefully before using
your DVD recorder.
Recording
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Playing discs
The region number for this
DVD recorder is 1.
Editing
1
Changing the SETUP menu
Supplied Accessory
• Round Coaxial cable • Audio/Video cables
(9HSWPZ0901TM003)
(9HSWX1E56B5-001)
• Operation Manual
(9HS1VMN20185)
• Quick Use Guide
(9HS1VMN20228)
Others
• Remote control
(9HSNB006UD)
with two “AA” size
batteries
Operation Manual
Español
Before you start
Precautions
For future reference, record the serial number (located on the rear of
the Unit) in the space provided.
Model No.:
DV-SR45U
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITAR LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user of uninsulated
voltage within the unit that can cause dangerous electric shocks.
This symbol alerts the user that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
“WARNING—FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.”
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
CAUTION:
THIS UNIT IS A CLASS 1 LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS UNIT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
2
Before you start
Important Safeguards
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. (Fig.A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
Connections
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Playing discs
Editing
Changing the SETUP menu
Others
Español
3
Recording
15. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
16. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
17. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
19. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
20. Damage Requiring Service - Unplug this video product from
the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video
product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any way.
f.When the video product exhibits a distinct change in performance this indicates a need for service.
21. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Safety Check - Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
23. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Getting started
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near water,
for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer.
9. Transportation - A product and cart combination should be
moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
10.Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.This video product should
not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
11. Power Sources - This video product should be operated
only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
12. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way.This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
14. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the video product, be sure the antenna
or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code, ANSI/NFPA No. 70, provides
Before you start
Precautions (cont’d)
Before you start
Precautions (cont’d)
Location and Handling
Location and Handling
• Do not cover or place the DVD recorder in enclosed spaces to prevent excessive temperature build up.
• Do not place the DVD recorder in direct sunlight, or near heat sources.
• Depending on the use environment, the temperature of the DVD recorder may increase slightly.This is not a malfunction.
• Keep the DVD recorder away from strong magnetic objects.
• Do not stand the unit vertically. Install the unit in a horizontal and stable position.
• Do not place any object containing water or other liquids on the DVD recorder. In the event that liquid should enter the cabinet,
unplug the DVD recorder immediately and contact the retailer or service centre approved by SHARP immediately.
• Do not remove the DVD recorder cabinet.Touching parts inside the cabinet could result in electric shock and/ or damage to the
DVD recorder. For service and adjustment inside the cabinet, call a qualified dealer or service centre approved by SHARP.
Nonuse Periods
Location and Handling
• When the DVD recorder is not being used, switch the DVD recorder to the Standby mode.
• When left unused for a long period of time, the DVD recorder should be unplugged from the household AC outlet.
• Do not place the DVD recorder in direct sunlight, or near heat sources.
Copy Protection
This Unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using the DVD recorder, the
copy protection code prevents the DVD copy from playing normally.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Notice for progressive scan outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 525p
DVD player, please contact our customer service center.
No Fingers or Other Objects Inside
Do not put your fingers or objects on the disc tray.
Warning of Dew Formation
Moisture may form inside the DVD recorder under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When the DVD recorder is suddenly moved from a cold to warm environment.
If moisture forms inside this DVD recorder, it may not operate properly. In such case, turn on the power and wait for more
than two hours for the moisture to evaporate.
Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
4
Before you start
Before you start
Precautions (cont’d)
Others
It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior
permission be obtained from copyright owners whenever necessary.
Connections
“Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618,
5,610,985, 5,740,317, 5,777,992, 5,878,080, or 5,960,037.”
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Maintenance
Recording
Playing discs
Editing
SERVICING
1. Please refer to relevant topics in the Troubleshooting on pages 92-95 before returning the product.
2. Do not attempt to service this Unit yourself. Instead, unplug it and contact a Sharp Authorized Service Center for inspection.
(See Service Information on page 97.)
3. Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shock, or other hazards.
4. Following any service or repair, be sure the service technician performs safety checks to certify that this Unit is in safe operating order.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or
abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center out. Do not wipe in a circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analogue records.
RECOMMENDED MEASURES FOR OPTIMUM PICTURE EXCELLENCE
This Unit is a precision device constructed using extremely accurate technology.
¡The disc cannot be played if the disc drive component is worn out or if the internal pick up lens is dirty.
¡If this unit still does not perform properly although you refer to the relevant sections and to Troubleshooting on pages 92-95,
the laser optical pickup unit may be dirty. Consult a Sharp Authorized Service Center for inspection and cleaning of the laser
optical pickup unit.
DISC HANDLING
¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
¡Always store the disc in its protective case when it is not used.
Getting started
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
Changing the SETUP menu
Others
Español
5
Before you start
Table of contents
Before you start . . . . . . . . . . . . . . . . . . .2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Functional overview . . . . . . . . . . . . . . . . . . . . . . .8
Installing batteries in the remote control . . . . . . . . .10
Using a remote control . . . . . . . . . . . . . . . . . . . . . .10
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . .11
Connections . . . . . . . . . . . . . . . . . . . . .13
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .13
Connection to a cable box or satellite box . . . .14
When connecting to a cable box or satellite box with
only a few scrambled channels . . . . . . . . . . . . . . . . .14
When connecting to a cable box or satellite box with
many scrambled channels . . . . . . . . . . . . . . . . . . . . .14
Connection to an Audio System . . . . . . . . . . . . .15
Getting started . . . . . . . . . . . . . . . . . . .16
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .16
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .18
Getting channels automatically . . . . . . . . . . . . . . . . .18
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .19
Selecting the TV stereo or SAP . . . . . . . . . . . . .20
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . .21
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .21
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .22
Setting the daylight saving time . . . . . . . . . . . . . . . .24
Selecting the TV aspect ratio . . . . . . . . . . . . . . .25
Recording . . . . . . . . . . . . . . . . . . . . . . .26
Information on DVD recording . . . . . . . . . . . . . .26
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Restrictions on recording . . . . . . . . . . . . . . . . . . . .26
Information on copy control . . . . . . . . . . . . . . . . . .27
Making discs playable in other DVD player (Finalize) 27
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .28
Choosing the recording format of a blank disc . . . . .28
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31
Checking the recording picture quality . . . . . . . . . .32
One-touch timer recording . . . . . . . . . . . . . . . .33
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36
Settings for an external source . . . . . . . . . . . . . .37
Connection to an external source . . . . . . . . . . . . . .37
Recording from an external source . . . . . . . . . . . . .38
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .39
Setting a disc to protect . . . . . . . . . . . . . . . . . . .40
Playing discs . . . . . . . . . . . . . . . . . . . . .41
Information on DVD play . . . . . . . . . . . . . . . . . .41
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Playing discs using the disc menu . . . . . . . . . . . . . . .44
Playing discs using the title menu . . . . . . . . . . . . . . .45
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .46
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .46
Skipping TV commercials during play . . . . . . . . . . . .47
6
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .48
Slow forward / Slow reverse play . . . . . . . . . . . . . . .48
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .50
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Repeat/Random/Program playback . . . . . . . . . .52
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Random playback . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Selecting the format of audio and video . . . . . .54
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .54
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .55
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .56
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .56
Editing . . . . . . . . . . . . . . . . . . . . . . . . .57
Information on disc editing . . . . . . . . . . . . . . . . .57
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .57
Editing discs with Video mode . . . . . . . . . . . . . . . . .57
Editing discs with VR mode . . . . . . . . . . . . . . . . . . .58
Editing DVD-RW discs in Video mode . . . . . . . .59
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .60
Setting or clearing chapter markers . . . . . . . . . . . . .62
Editing DVD-RW discs in VR mode (Original) . .63
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .64
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .65
Setting or clearing chapter markers . . . . . . . . . . . . .67
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .68
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .70
Releasing titles from protecting . . . . . . . . . . . . . . . .71
Editing DVD-RW discs in VR mode (Playlist) . . .72
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .73
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .74
Setting or clearing chapter markers . . . . . . . . . . . . .76
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .77
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .79
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .81
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .82
Changing the SETUP menu . . . . . . . . .83
Tour of the SETUP menu . . . .
Language setting . . . . . . . . . . .
Display setting . . . . . . . . . . . . .
Audio setting . . . . . . . . . . . . . .
Settings for Parental lock level
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.83
.84
.86
.88
.90
Others . . . . . . . . . . . . . . . . . . . . . . . . .92
Troubleshooting . . . . . . . . . . . . . .
Language code . . . . . . . . . . . . . . .
Glossary . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . .
Service Information (For the U.S.)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.92
.95
.96
.97
.97
Español . . . . . . . . . . . . . . . . . . . . . . . . .98
Before you start
Before you start
Features
This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and
edit them after that.
The following features are offered with this DVD recorder.
Compatibility
Available for playing discs recorded in Video mode
on a regular DVD player (Video mode):
Discs recorded in Video mode can be played on regular
DVD players, including computer DVD drives compatible
with DVD-Video playback*.You will need to finalize the
discs recorded in Video mode to play in other DVD players.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher resolution than that of traditional television signals.
DVD-V
Video
DVD-RW
Start to play from Original and Playlist:
Title playing is available from either an Original list or
Playlist.
DVD-RW
Avaialble to DVD-RW in VR mode
DVD-R
Available to DVD-R discs
Video
DVD+RW
Available to DVD+RW in Video mode
DVD+R
Available to DVD+R discs
CD
Available to Audio CDs
MP3
Available to CD-RW/R discs with
MP3 files
Others
Español
Editing
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remains as it is, you can edit titles on
various Playlist as you prefer.
Putting names on titles
Setting pictures for thumbnails
Setting/clearing chapter markers
Deleting parts of titles etc
VR
Avaialble to DVD-RW in Video mode
Changing the SETUP menu
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by
title, chapter, or time.
Available to DVD Video discs
Editing
Many functions of this DVD recorder are depending on
the disc type or the recording mode.
To specify for what disc type or recording mode each
function is, we put the following symbols at the beginning
of each item to operate.
Description
Symbol
Playing discs
Symbol in this operation manual
Recording
* DVD-Video Format (Video mode) is a new format for recording on DVD-RW/R discs that was approved by the DVD Forum
in 2000. Adoption of this format is optional for manufactures of
DVD playback devices, and there are DVD-Video players, DVDROM drives or other DVD playback devices that do not play
DVD-RW/R discs recorded in the DVD-Video Format.
Getting started
Play
Theater surround sound in your home:
When connecting the DVD recorder to an amplifier or a
decoder which is compatible with Dolby Digital or DTS,
you are allowed to experience the theater surround sound
from discs with surround sound system.
Protecting titles:
To avoid editing or erasing titles, the protect function is
useful when it is ON in the original list.
Connections
Recording
This DVD recorder is compatible with both DVD-RW,
which is rewritable repeatedly, and DVD-R, which is available for recording once.You can choose either one for
your convenience.
Up to 8 program recording:
You can program the DVD recorder to record up to 8
programs, up to a year in advance. Daily or weekly program recordings are also available.
One-touch timer recording:
You can easily set a recording time as you prefer. Every
time the REC button pressed during recording, the
recording time will be increased by 30 minutes up to 4
hours.The recording automatically stops when the recording time you set is reached.
REC MONITOR:
You can confirm the picture quality for recording in the
current recording speed which you set. If you want to
change the recording speed, press REC MODE button to
set the desired recording mode.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Automatic Title menu making:
The DVD recorder makes title menus automatically when
finalizing the disc which are recorded in Video mode.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
7
Before you start
Functional overview
Front Panel
1
2 3 4 5* 6* 7*
REC/OTR
8
9
OPEN/CLOSE
(*) The unit can also
be turned on by
pressing these
buttons.
15 14 13 12 11
1.
2.
3.
4.
5.
6.
7.
POWER button
Press to turn the DVD recorder on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode.
CH L / K button
Press to change the channel up and down.
E (REV) button
During playback, press to skip to the previous chapter
or track.
During playback, press and hold for 1.5 seconds to fast reverse.
When playback is paused, press repeatedly to slow reverse.
D (FWD) button
During playback, press to skip to the next chapter or track.
During playback, press and hold for 1.5 seconds to
fast forward.
When playback is paused, press repeatedly to slow forward.
C (STOP) button*
Press to stop play or recording.
B (PLAY) button*
Press to start or resume play.
OPEN/CLOSE A button*
Press to open or close the disc tray.
Rear Panel
10
8.
9.
10.
11.
12.
13.
14.
15.
Disc tray
Place a disc when open.
Display
Refer to “Front Panel Display Guide” on page 12.
Remote control sensor
Receive signals from your remote control so that you
can control the DVD recorder from a distance.
REC/OTR button
Press once to start a recording. Press repeatedly to
start a one-touch timer recording.
REC MODE button
Press to switch the recording speed.
AUDIO INPUT jacks (LINE2)
Use to connect external equipment with standard
audio cables.
VIDEO INPUT jack (LINE2)
Use to connect external equipment with a standard
video cable.
S-VIDEO INPUT jack (LINE2)
Use to connect the S-Video output of external equipment with an S-Video cable.
1
2
3 4
R
VIDEO
L
AUDIO
6
TV ANTENNA
OUTPUT
1
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
5
Y
S-VIDEO
2
PB/CB
PR/CR
INPUT
COAXIAL
11
1.
2.
3.
4.
5.
6.
AC Power Cord
Connect to a standard AC outlet to supply power to this
unit.
AUDIO OUTPUT jacks 1, 2
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
VIDEO OUTPUT jack
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
S-VIDEO OUTPUT jack
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with component video cables.
TV ANTENNA IN jack
Use to connect an antenna.
R AUDIO
L
(L1)
VIDEO
10 9
S-VIDEO
8
COMPONENT
VIDEO OUTPUT
7
7.
TV ANTENNA OUT jack
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
8. S-VIDEO INPUT jack(LINE1)
Use to connect the S-Video output of external equipment with an S-Video cable.
9. VIDEO INPUT jack(LINE1)
Use to connect external equipment with a standard
video cable.
10. AUDIO INPUT jacks(LINE1)
Use to connect external equipment with standard
audio cables.
11. COAXIAL DIGITAL AUDIO OUTPUT jack
Use to connect an AV receiver, Dolby Digital decoder
or other equipment with a coaxial digital input jack
with a digital coaxial cable.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to
the DVD recorder.
• This unit does not have an RF modulator.
8
Before you start
Remote Control
POWER
1
3
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
CH
REC
MONITOR
4
REC MODE CLEAR
6
8
5
REC
PAUSE
7
18
19
G
20
B
PLAY
FWD
h
g
21
STOP
C
TOP MENU
12
K
22
ENTER
REPEAT
{
B
24
23
RETURN
ZOOM
15
MENU/LIST
L
25
Changing the SETUP menu
Others
Español
7. REC button
Press once to start a recording. Press repeatedly to start a
One-Touch timer Recording.
8. PAUSE F button
Press to pause play or
recording.
9. PLAY B button*
Press to start or resume play.
10. REV E button
During playback, press to fast
reverse.
Or when playback is paused,
press to play slow reverse.
11. STOP C button*
Press to stop play or recording.
12. SETUP button
Press to display the setup
menu.
During DVD playback, press
and hold for more than 3 seconds to switch to the progressive scanning mode or
the interlace mode.
13. TOP MENU button
Press to display the top
menu.
Editing
1. POWER button
Press to turn the DVD
recorder on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode.
2. DISPLAY button
Press to display or change the
on-screen display.
3. CH K / L buttons
Press to change the channel
up and down.
4. REC MONITOR button
Press to check the video signal to be recorded before
attempting.
5. REC MODE button
Press to switch the recording
speed.
6. CLEAR button
Press to clear the password
once entered or to cancel the
programming for CD or to
clear the selecting marker number in the marker setup mode
or to clear the program once
entered in the timer recording
setting mode,etc.
Playing discs
(*) The unit can also
be turned on by
pressing these
buttons.
Recording
14
H
REV
SETUP
13
16*
17
SKIP
F
9*
10
11*
A
Getting started
TIMER
PROG.
Connections
2
OPEN/CLOSE
DISPLAY
14. REPEAT button
Press to display the repeat
setting menu.
15. ZOOM button
During playback, press to
enlarge the picture on the
screen.
16. OPEN/CLOSE A button*
Press to open or close the
disc tray.
17. TIMER PROG. button
Press to display the timer
program setting menu.
18. Number buttons
Press to select channel numbers.
Press to select a title/chapter/track on display or a TV
channel.
Or press to enter values for
the settings in the SETUP
menu.
19. CM SKIP button
During playback, press to skip
30 seconds.
20. SKIP H button
During playback, press to skip to
the previous chapter or track. Or
when playback is paused, press to
play reverse step by step.
SKIP G button
During playback, press to skip to
the next chapter or track.
Or when playback is paused, press
to play forward step by step.
21. FWD D button
During playback, press to play
fast forward.
Or when playback is paused,
press to play slow forward.
22. MENU/LIST button
Press to display the Disc
menu.
To change ORIGINAL and
PLAYLIST on the TV screen.
(VR mode only)
23. ENTER button
Press to confirm or select
menu items.
24. K / L / { / B buttons
Press to select items or settings.
25. RETURN
button
Press to return to the previously displayed menu screen.
Before you start
Functional overview (cont’d)
9
Before you start
Functional overview (cont’d)
Installing batteries in the remote control
Using a remote control
Install two “AA” size batteries (supplied) matching
the polarity indicated inside battery compartment of
the remote control.
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the
DVD recorder.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the DVD recorder.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the DVD
recorder.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
1
2
3
Within about
23feet (7m)
60˚
POW
ER
DISPL
AY
CH
SPEE
D
PAUS
PQRS
4
CLEA 7
R
E
GHI
1
.@/:
2
DEF
5
MNO
8
CM
TIME
PRO
G. R
ABC
JKL
TUV
SPAC
E
0
9
SKIP
3
WXY 6
Z
Y
PLA
IP
SK
P
E
LOS
N/C
OPE
REC
REC
REV
P
U/
MEN AL
GIN
STO
TOP
ORI
D
FW
R
PLA
ENTE
T
NU
LIS
ME Y
Remote
control
C OR
RENIT
MO
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery compartment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
Guide to Displays on screen menu
This unit uses the following on screen menu for most operations: SETUP/DISC/CD menu,Title list, and DISPLAY menu.They allow you to change the playing status of disc during play.
The DISPLAY menu also gives you information on the status of the disc.
DISPLAY menu
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
Details are on page 41.
3
1
1
1
00:00:00
DVD-RW
Video mode
SP 1:25 Rem.
4
10
2
1. Indicates a disc type and a
format mode.
NOTE: In some descriptions
on this manual, only one disc
type is indicated as an example.
2. Indicates a recording mode
and possible recording time.
3. Indicates a title number, chapter number, and the time
lapse of disc play.
4. Each icon means:
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
Before you start
SETUP/DISC/CD menu
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by { / B button.
Then, press ENTER button to display each menu.
These menus provide entries to all main functions of the DVD recorder.
“DISC” is available only when a DVD-RW/R disc is inserted into the unit. When a DVD-Video disc (commercially
available), new DVD-R disc, or the finalized DVD-R disc is
inserted into the unit, you cannot select “DISC”.
“CD” is available only when an
Audio CD disc or a CD-RW/R
disc with MP3 files is inserted
into the DVD recorder.
Connections
“SETUP” is available only
in the Stop mode.
Before you start
Functional overview (cont’d)
Getting started
Setup Menu
2
3
Disc
CD Playback Mode
Edit
Random Play
Format
Program Play
Finalize
Disc Protect OFF
5
6
ON
1 2 3 4
1 2
Playback Setting
1. Random Play:
To activate the random playback
feature.
2. Program Play:
To activate the programmed playback feature.
Changing the SETUP menu
Others
Español
1. Edit:
Turns on a title list, (When a disc
with VR mode is inserted,
'Original' or 'PlayList' is available.),
which shows the recorded titles
on the disc.
2. Format (DVD-RW only):
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
• Erased content cannot be called
back. Please make sure before
you format a disc.
• A DVD-RW disc formatted with
this unit cannot be used in other
DVD recorders without any
recording using this unit.
• If you want to use a disc only formatted with this unit on another
DVD recorder, you have to re-format the disc on that recorder.
3. Finalize:
Allows you to finalize a disc
containing recorded titles.
4. Disc Protect (VR mode only) :
Allows you to protect a disc from
accidental editing or recording.
Editing
1. Playback:
To set up the DVD recorder to
play discs as you prefer.
2. Recording:
To set up the DVD recorder to
record to discs as you prefer.
3. Display:
To set up the OSD screen and the
front display of the DVD recorder
as you prefer.
4. Select Video:
To choose a line input to record
to DVD discs from other video
equipment.
5. Clock:
To set up the clock of the DVD
recorder as you need.
6. Channel:
To adjust the channel setting of
the DVD recorder as you prefer.
Playing discs
4
Recording
Setup
1
CD Playback Mode
Disc Setting
11
Before you start
Functional overview (cont’d)
Front Panel Display Guide
4
2
1
3
7
6
5
1. Current status of the
DVD recorder
: Appears when disc playback is paused.
: Appears when playing a
disc.
: Appears when the timer
programming has been
set and is proceeding.
: Appears during recording
process.
:
Appears during repeat
play.
2. Disc type
: Appears when an audio
CD or a disc with MP3
files is inserted in the disc
tray.
: Appears when a DVD
disc is inserted in the
disc tray.
:
Appears when a DVD-R
disc is inserted in the
disc tray.
:
Appears when a DVDRW disc is inserted in
the disc tray.
3. Recording speed
Indicates the recording speed of
the disc.
4. Title/Track and Chapter
mark
: Appears when indicating
a title/track number.
: Appears when indicating
a chapter number.
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
• OTR (one-touch timer
recording) remaining time
6.
7.
: Appears in the afternoon with the clock
displaying.
:
Appears when the progressive scan system is
activated.
Display message
12
Appears when the DVD
recorder is turned on.
Appears when the disc
tray is closing.
Appears when the DVD
recorder is turned off.
Appears when a disc is
loaded on the disc tray.
Appears when the disc
tray is opening.
Appears when data is
being recorded on a disc.
Connections
Before you start
Connection to a TV
Antenna
Antenna
Cable
Signal
Cable
Signal
(Back of TV)
AUDIO IN
VIDEO
(Back of TV)
5
Connect
Audio
Cable
(supplied)
Connect
Video
Cable
(supplied)
VIDEO
L
AUDIO
Y
S-VIDEO
2
2
PB/CB
Connect
PR/CR
Disconnect
INPUT
COAXIAL
R AUDIO
L
(L1)
VIDEO
S-VIDEO
Getting started
1
R
3
Connect
Round Coaxial Cable
(supplied)
TV ANTENNA
OUTPUT
1
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
or
4
Connections
or
COMPONENT
VIDEO OUTPUT
(Back of DVD recorder)
6 Plug in the AC power cord of the DVD recorder.
Make one of the following connections, depending on the capabilities of your existing equipment.
Method 1
Method 2
Better picture
Best picture
Recording
Basic Audio
COMPONENT
VIDEO IN
TV
Y
S-VIDEO IN
R
L
PB/CB
Playing discs
PR/CR
S-Video
cable
(commercially
available)
Audio cable
(supplied)
Component
Video cables
(commercially
available)
DVD Recorder
AUDIO
Editing
OUTPUT
1
R
Y
OUTPUT
S-VIDEO
L
PB/CB
R
TV ANTENNA
OUTPUT
1
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
VIDEO
L
AUDIO
Y
S-VIDEO
2
PB/CB
or
PR/CR
INPUT
COAXIAL
R AUDIO
L
(L1)
VIDEO
S-VIDEO
PR/CR
S-VIDEO OUT
COMPONENT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
OUTPUT
AUDIO
L
COMPONENT VIDEO OUT
Changing the SETUP menu
R
2
AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• When Progressive Scan mode is selected, no video signal will be output from the VIDEO
OUT or S-VIDEO OUT jack.
Others
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
ENTER
REPEAT
{
ZOOM
K
MENU/LIST
B
RETURN
more than 3 seconds
during DVD playback
[Interlace mode]
Español
If your TV is compatible with Progressive Scan (480p) and you want to
enjoy that high quality picture;
You must select the connection Method 2 above and Progressive Scan mode.To set the
mode, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” will appear on the display of this unit.
If your TV is not compatible with Progressive Scan;
Use this unit in Interlace mode. Make sure that no “P.SCAN” is on the display of this unit.
If not, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” on the display of this unit will disappear.
[Progressive Scan mode]
13
Connections
Connection to a cable box or satellite box
A
When connecting to a cable box or satellite box with only a few scrambled
channels
If you are using a cable box or satellite box with only a few scrambled channels, follow the setup on this
page. If many or all the channels are scrambled, use the connection B on this page.
With this setup:
• You can record any unscrambled channel by selecting the channel on the DVD recorder.
• You cannot record scrambled channels that require a cable box or satellite box.
(Back of TV)
AUDIO IN
VIDEO
Round
3 Connect
Coaxial cable
Round Coaxial cable
2 Connect
(supplied)
4
Connect
Video
cable
(supplied)
Y
VIDEO
L
AUDIO
Round
Coaxial
cable
TV ANTENNA
OUTPUT
1
R
S-VIDEO
2
PB/CB
R AUDIO
L
(L1)
VIDEO
S-VIDEO
Cable
Signal
1
PR/CR
INPUT
COAXIAL
IN
OUT
5
Connect
Audio
cable
(supplied)
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
(Cable box or
Satellite box)
Connect
COMPONENT
VIDEO OUTPUT
(Back of DVD recorder)
B
When connecting to a cable box or satellite box with many scrambled
channels
If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure
that the cable box or satellite box is turned on.
• You cannot record one channel while watching another channel.
(Back of TV)
AUDIO IN
VIDEO
4
3
Connect
Audio
cable
(supplied)
Connect
Video
cable
(supplied)
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
R
VIDEO
L
AUDIO
PB/CB
PR/CR
L
(L1)
VIDEO
IN
Y
2
R AUDIO
OUT
Cable
Signal
S-VIDEO
INPUT
COAXIAL
(Cable box or
Satellite box)
TV ANTENNA
OUTPUT
1
2
Connect
Round Coaxial
cable (supplied)
S-VIDEO
COMPONENT
VIDEO OUTPUT
1
Connect
Round
Coaxial
cable
(Back of DVD recorder)
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
14
Connections
Before you start
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Method 2
Stereo system
Dolby Digital decoder, DTS decoder or
MD deck or DAT deck
AUDIO
COAXIAL
Connections
Analog audio
input jacks
Digital audio
input jack
DVD Recorder
OUTPUT
1
R
AUDIO OUT
AUDIO
L
COAXIAL
2
L
Playing discs
Editing
Changing the SETUP menu
Note
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder and set “Dolby Digital” to
“Stream” for the “Digital Out” setting in the SETUP
menu. (Refer to pages 88-89.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital Out”
setting in the SETUP menu. (Refer to pages 88-89.)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by
an MD or DAT deck.
• Unless connected to a Dolby Digital decoder or a DTS
decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF”
for the “Digital Out” setting in the SETUP menu. Playing a
DVD using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to pages
88-89.)
• Set “Dolby Digital” to “PCM” for the “Digital Out” setting in the SETUP menu for connecting to an MD deck
or DAT deck. (Refer to pages 88-89.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1
channel surround sound as heard in the movie theaters.
• By hooking this unit up to the DTS decoder, you can
enjoy 5.1channel surround system which reproduces the
original sound as truthfully as possible. 5.1channel surround system is developed by the Digital Theater System,
Inc.
Recording
OUTPUT
AUDIO
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
DIGITAL
AUDIO OUT
or
R
Getting started
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
Others
Español
15
Getting started
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
Step 1: Choose a disc type
Step 2: Insert a blank disc
There are several types of recordable DVD discs to
choose from. Choose a recordable DVD disc type
based on your playing/recording/editing reguirements. See “DVD disc types” at the bottom of this
page for more information on the differences
between the different kinds of compatible media.
This DVD recorder can record on the following
type of discs.
Remote Control
POWER
1
CH
OPEN/CLOSE
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
JKL
MNO
2
To open
A
To turn on
4.7
* This unit cannot record on the following discs.
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
• DVD-R General Ver 2.0 / 8x
For example, when you want to record repeatedly on the same disc, or when you want to edit the
disc after recording, select the rewritable DVDRW type disc.
When you want to save recordings without any
alteration, a non-rewritable DVD-R can be your
choice.
POWER
CH
OPEN/CLOSE
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
JKL
MNO
A
3
To Close
Loading
This operation may take a
while to be recognized.
DVD disc types
Format the disc
.
Insert the disc in the
recorder.Then, format the
disc from SETUP menu.Video
format (Video mode) or
Video recording format (VR
mode) will be available
depending on the disc type
inserted.This is necessary to
prepare the disc for recording. Details are on pages 2830.
* When you format, the
entire contents on that disc
will be erased.
• The unit automatically
starts formatting when an
unused disc is inserted.
: Most suitable.
: Can be used.
: Some functions are limited.
You want to
DVD-RW VR
: Cannot be used.
DVD-RW Video
DVD-R
DVD-RW VR
DVD-RW Video
DVD-R
Rewritable?
Yes
Yes
No
Can create chapters at fixed intervals (auto.)
Yes
Yes
Yes
Record TV programs
Reuse by deleting unwanted contents
Edit recorded contents
Edit/Record from connected equipment
Copy discs for distribution
*1
Play on other DVD equipment
*1
Features
Recording
Can create chapters wherever you like (manual)
Yes
No
No
Can record 16:9 size pictures
Yes
Yes
Yes
Can record Copy-Once programs
Yes
No
No
Can perform basic edit functions
Yes
Yes
Yes
Can perform advanced edit functions (Playlist edit)
Yes
No
No
Editing
*1
16
DVD-RW (VR mode) can only be played on DVD
equipment that is VR compatible.
Note:
For details of the above functions and implied
restrictions, see the explanations inside the manual.
Getting started
Step 3: Select the
recording
speed
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
REC MODE CLEAR
POWER
OPEN/CLOSE
DISPLAY
TUV
8
WXYZ
9
SPACE
0
CM SKIP
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
OPEN/CLOSE
A
REC
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
REC
DISPLAY
A
A
SPACE
0
PAUSE
Getting started
REC MODE CLEAR
POWER
OPEN/CLOSE
DISPLAY
Step 5: Record to
DVD discs
Connections
POWER
Step 4: Select the
desired
channel
CM SKIP
SKIP
F
H
G
CH 1
SP 2:01 Rem.
Recording
I
Hint 1: Play the recorded contents
Start Rec.
Title 1
Stop/Start
Stop Rec.
Title 2
What is titles and chapters?
The contents of DVD disc are generally
divided into some titles.Titles may be
further divided into chapters.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Hint 2: Edit the recorded disc
You can edit the following from a title list.
Step 6: Stop the
record
7
REC MODE CLEAR
REC
8
9
SPACE
0
CM SKIP
PAUSE
SKIP
F
H
G
Editing
You will find editing discs is easy.This unit offers convenient edit functions
which are possible only with DVD-R/RW discs.
Playing discs
You can select the title you want to play
from a displayed menu, and immediately
start to play. Recorded contents are easily
accessible, with simple procedure of choosing a title on a chapter in the menu screen.
Before you start
Easy DVD recording (Cont’d)
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
Changing the SETUP menu
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles or scenes (VR mode)
MENU/LIST
Title Delete :This deletes an entire scene permanently from the disc.
Scene Delete :This allows a user to edit within a specific scene (ex. commercials).
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings. Playlist does not take up much disc space.
58%
Writing to Disc
What “Original” or “Playlist” is for?
Others
Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on the disc.
• Playlist content refers to the edited version of the disc; how the Original
content is to be played.
Finalizing a Disc
This operation may
take a while to be
completed.
Español
• This will allow a disc that is recorded on our unit to be played back on a different DVD player- without finalization it will not be playable on another player.
• After finalizing a disc if the recording was in video mode, you can not edit any
information that is on that disc.
• If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing.
17
Getting started
Channel setting
All channels are stored in the
DVD recorder when purchased.
We recommend that you get
available channels in your area
stored using “Auto Preset” in the
Channel Preset of the SETUP
menu.
4
POWER
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
1
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
Getting channels automatically
SPACE
0
Setup
REC
OPEN/CLOSE
DISPLAY
PAUSE
A
CM SKIP
SKIP
F
H
G
B
PLAY
REV
1
g
STOP
C
Press POWER button to turn
on the DVD recorder.
3
7
Playback Setting
2
5
Turn the TV on and be sure
to select the input to which
the DVD recorder is connected.
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
Auto Preset
Manual Preset
TV Audio Select
Stereo
6
3
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Auto Preset” using K
/ L buttons, then press
ENTER button.
The DVD recorder will start getting channels available in your
area.
CH 18
Auto Presetting Now
Setup Menu
7
Press SETUP button to exit.
•You can select only the channels
memorized in this unit by using
the CHANNEL buttons.
18
FWD
h
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
4
5
6
To select a channel
You can select a channel by
directly entering channel using
the Number buttons on the
remote control.
Notes for using the
Number buttons:
• When selecting cable channels
which are higher than 99,
enter channel numbers as a
three-digit number.(For example: 117, press 1,1,7)
• You must precede single-digit
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
• You can select the line input
mode (“L1” or “L2”). To select
“L1” by pressing [0], [0], [1].To
select “L2” by pressing [0], [0],
[2]. Details are on page 38.
Note
• If the auto presetting is cancelled during presetting, some
channels not yet preset may
not be received.
• The selection will depend on
how you receive the TV channels.
To cancel the auto presetting during scanning:
Press RETURN button or
SETUP button to cancel.
Getting started
Before you start
Channel setting (cont’d)
Adding/deleting channels
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
POWER
CH
REC
MONITOR
Setup > Channel Preset > Manual Preset
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PAUSE
SKIP
F
H
G
B
PLAY
FWD
h
g
STOP
C
1
7
TOP MENU
K
MENU/LIST
ENTER
{
B
RETURN
ZOOM
L
2
3
4
5
6
Playing discs
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
SETUP
REPEAT
Recording
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
2
WXYZ
9
CM SKIP
REV
5
Setup Menu
REC
TUV
8
Getting started
CH2
Add
Delete
A
SPACE
0
PQRS
7
REC MODE CLEAR
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
DISPLAY
Connections
The channels you no longer
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
4
Setup > Channel Preset > Manual Preset
CH18
Add
Delete
Setup
Editing
6
Playback Setting
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
7
Auto Preset
Manual Preset
TV Audio Select
Others
Setup > Channel Preset
Changing the SETUP menu
3
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from a channel
memory.Then the next channel
number will appear so that you
can continue adding or deleting
channels.
Stereo
Press SETUP button to exit.
Español
19
Getting started
Selecting the TV stereo or SAP
You can select a sound channel to
output from TV. “Stereo” has
been selected as the default.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “TV Audio Select”
using K / L buttons, then
press ENTER button.
Option window will appear.
POWER
CH
REC
MONITOR
Setup > Channel Preset
Auto Preset
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Manual Preset
Stereo
Stereo
SAP
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
TV Audio Select
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
1
6
5
Setup Menu
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
SETUP
TOP MENU
K
{
B
RETURN
ZOOM
Select “Stereo” or “SAP”
using K / L buttons, then
press ENTER button.
MENU/LIST
ENTER
REPEAT
L
2
3
4
5
Stereo:
Outputs main-audio.
SAP:
(Secondary Audio Program)
Outputs Sub-audio.
Refer to the item in “Glossary”
on page 96 for more information.
6
Playback Setting
Press SETUP button to exit.
Notes on TV channel audio
3
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
• When you record a TV program available in second audio or stereo
on a DVD-RW/R, you have to select either Stereo or SAP in the
Channel Preset screen beforehand. Refer to the following table to
check an appropriate setting.
Selected
audio
Stereo
Auto Preset
Manual Preset
TV Audio Select
Stereo
SAP
Broadcast
audio
STEREO+SAP
STEREO
MONO+SAP
MONO
STEREO+SAP
STEREO
MONO+SAP
MONO
Disc
recording
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
Audio
output
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
• As can be seen in the above table, when a TV program is available in
second audion and you set Channel Preset to SAP, you can only play
the recording in second audio.
20
Getting started
Before you start
Setting the clock
Auto Clock Setting
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
7
CH
REC
MONITOR
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
OFF
Auto
Auto
Manual
Off
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
1
6
1
5
TOP MENU
K
MENU/LIST
ENTER
{
B
RETURN
ZOOM
L
2
3
4
5
Setup Menu
Playing discs
• If you know your PBS channel number, select “Manual”
using K / L buttons, then
press ENTER button.
Setup > Clock
2
Clock Setting
Auto Clock Setting
Daylight Saving Time
Setup
OFF
Set Channel
No.
Auto
Auto
CH1
Manual
Off
Editing
Select “SETUP” using { / B buttons, then press ENTER button.
SETUP menu will appear.
6
Select “Clock” using K / L / { / B
buttons, then press ENTER button.
Clock menu will appear.
7
Setup > Clock
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
21
Español
Press POWER button to turn
off the DVD recorder. This unit
will search for the time only
when the power is off. Leave it off
for several minutes to give this
unit time to set the clock on the
front display of the front panel.
Note
• The clock may set itself automatically after you connect the
antenna/cable signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the front
panel display.
• If the current time is not displayed or the displayed clock
is not correct, set the clock
manually.
Others
3
Press SETUP button to exit.
Changing the SETUP menu
Enter your PBS channel
number using Number or K
/ L buttons, then press
ENTER button.
Playback Setting
Recording
• If you do not know your
PBS channel number, select
“Auto” using K / L buttons,
then press ENTER button.
SETUP
REPEAT
Getting started
Make sure
• The antenna/Cable TV connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station on them to
set the clock automatically.
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
POWER
Connections
Set the clock before you try the
timer recording. If a Public
Broadcasting Station (PBS) is available
in your area, follow Auto Clock
Setting below. If not, follow Manual
Clock Setting on pages 22-23.
Getting started
Setting the clock (cont’d)
Manual Clock Setting
4
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Clock Setting” using
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
POWER
CH
REC
MONITOR
Setup > Clock
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Auto Clock Setting
Auto
Daylight Saving Time
ON
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
Clock Setting
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
---/--/----(---)
--:--
PLAY
REV
FWD
h
g
STOP
C
1
Setup Menu
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
TOP MENU
K
B
RETURN
ZOOM
L
5
Enter the date (month / day /
year) using K / L buttons.
Press { / B button to move the
cursor.
MENU/LIST
ENTER
{
Press ENTER button again.
Default date will appear.
2
SETUP
REPEAT
2
3
4
5
6
Setup > Clock
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
12 : 00AM
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
6
Enter the time (hour /
minute) using K / L buttons,
then press { / B buttons.
A cursor will move on AM or PM.
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Setup > Clock
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
09 : 24 AM
Note
• Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds
when you set the clock manually.
22
Getting started
Before you start
Setting the clock (cont’d)
8
Press K / L buttons to select
AM or PM, then press ENTER
button.
Clock menu will appear, then the
settings will be activated.
Press SETUP button to exit.
Although seconds are not displayed,
they begin counting from zero.
POWER
CH
REC
MONITOR
Setup > Clock
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Auto
Daylight Saving Time
ON
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
8
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
7
Getting started
Auto Clock Setting
A
SPACE
0
PQRS
7
REC MODE CLEAR
Clock Setting
OPEN/CLOSE
DISPLAY
Connections
7
RETURN
ZOOM
L
Recording
Playing discs
When “Auto Clock Setting” is selected to “Auto” or
“Manual”, change it to “OFF” as following steps.
Repeat steps (1) to (3) in “Manual Clock Setting”.
Editing
B
PLAY
5
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Select “OFF” using K / L
buttons, then press ENTER
button.
6
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
OFF
Auto
Auto
Manual
Off
Press SETUP button to exit.
FWD
h
g
STOP
C
6
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
4
5
Changing the SETUP menu
4
REV
Others
Español
23
Getting started
Setting the clock (cont’d)
Setting the daylight saving time
When Daylight Saving Time is
ON, the DVD recorder clock will
automatically move forward one
hour on the first Sunday in April
and move back one hour on the
last Sunday in October.
4
Select “Daylight Saving
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
POWER
CH
REC
MONITOR
Setup > Clock
1
Auto Clock Setting
Daylight Saving Time
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Clock Setting
24
Auto Clock Setting
Auto
Daylight Saving Time
ON
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
F
H
ON
OFF
G
B
PLAY
REV
FWD
h
g
STOP
C
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight saving time.
2
REC
Auto
5
Setup Menu
TIMER
PROG.
REC MODE CLEAR
Clock Setting
OPEN/CLOSE
DISPLAY
6
Press SETUP button to exit.
1
6
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
4
5
Getting started
Before you start
Selecting the TV aspect ratio
4
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
Option window will appear.
POWER
CH
REC
MONITOR
Setup > Playback
1
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
REC
DEF
3
GHI
4
JKL
5
MNO
6
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
H
G
B
Digital Out
PLAY
Dynamic Range Control
ON
Fast Forward with Audio
OFF
REV
FWD
h
g
STOP
C
1
6
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
4
5
Playing discs
6
Recording
Select a desired option using
K / L buttons, then press
ENTER button.
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
ABC
2
F
5
2
.@/:
1
REC MODE CLEAR
Original
OFF
Refer to the Note on this
page.
Setup Menu
TIMER
PROG.
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
16:9 Box
Wide
4:3 Letter
8 & Scan
4:3 Pan
16:9English
Wide
OPEN/CLOSE
DISPLAY
Connections
You can select the TV aspect ratio
to match the formats of what you
are playing with the DVD
recorder and your TV screen (4:3
standard or 16:9 widescreen TV).
“4:3 Letter Box” has been selected as the default.
Press SETUP button to exit.
Setup
Editing
Playback Setting
Changing the SETUP menu
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Playback menu will appear.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
25
Español
If you have a standard TV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen.
Select “4:3 Pan & Scan” for a
full height picture with both
sides trimmed.
If you have a widescreen TV:
Select “16:9 Wide”.
Others
Setup > Playback
Note
Recording
Information on DVD recording
Information
Recording speed
This DVD recorder can record to DVD-R and
DVD-RW discs.When recording, you will need to
select a recording format between Video mode and
VR mode depending on the disc format.The disc
format for DVD-R is always “Video format,” so a
recording format will be “Video mode”.
On the other hand, when recording to DVD-RW, a
recording format will be “Video mode” or “VR
mode” because a disc format is available between
“Video Recording format” and “Video format” for
DVD-RW.
You can select a recording speed among 6 options,
and the recording time will depend on the recording speed you select as follows.
Logo
Attributes
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
DVD-RW
180 minutes (1.4GB) (for 8cm)
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
4.7
180 minutes (1.4GB) (for 8cm)
DVD-R
* This unit cannot record on the following discs.
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
• DVD-R General Ver 2.0 / 8x
About Video mode and VR (Video Recording)
mode
Video mode is the same recording format as DVDVideo discs purchased locally, so that you can play in
most DVD players.To play in other DVD players,
you will need to finalize (see page 39). Unless finalized, you can play, record additionally or edit discs
recorded in Video mode with this unit.
VR (Video Recording) mode is a basic recording
format for DVD-RW.You can record and edit
repeatedly.
DVD players with
are capable of playing
DVD-RW recorded in VR mode.
Disc type
Disc format
Functions
Video mode
Playing, limited recording,
limited editing
Video
DVD-RW
DVD-RW VR mode
VR
DVD-RW
Video mode
4.7
DVD-R
26
DVD-R
Playing, recording,
Original/Playlist editing
Playing, limited recording,
limited editing
Recording Recording
Video/Sound Quality
time *
speed
XP
60 min
SP
120 min
LP
240 min
EP
360 min
SLP
480 min
SEP
600 min
* This table is designed for a new single-sided 12cm
disc as the standard.The recording time are estimates and actual recording time may differ.
* The audio and video quality is getting poorer as
the Recording time becomes longer.
* Discs recorded in SLP or SEP on this recorder
may not be played back on other DVD recorders
or DVD players.
Restrictions on recording
You cannot record copy-protected video using this
DVD recorder. Copy-protected video includes
DVD-Video discs and some satellite broadcasts.
If copy-protected material is encountered during a
recording, recording will pause or stop automatically
and an error message will be displayed on-screen.
Video that is “copy-once only” can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
When recording a TV broadcast or through an
external input, you can display copy control information on screen.
What is “CPRM”?
CPRM is a copy protection system with scramble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This DVD recorder is CPRM compatible, which
means that you can record copy-once broadcast programs, but you cannot then make a
copy of those recordings. CPRM recordings can
only be made on DVD-RW discs formatted in
VR mode, and CPRM recordings can only be
played on players that are specifically compatible with CPRM.
Recording
Before you start
Information on DVD recording (cont’d)
Information on copy control
Some satellite broadcasts include copy-protected
information. For recording these, refer to the following.
VR
DVD-RW
Copy-free Copy-once Copyprohibited
ver.1.1
ver.1.1 CPRM compatible
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
DVD-R
ver.2.0
Video
After recording, you must finalize disc in order to
play on anyother unit. (Refer to page 39.)
Connections
Disc type / format
Making discs playable in other DVD
player (Finalize)
Playable
This Unit
DVD player
Not Playable
Note
• Once DVD-RW/R (Video mode) is finalized, you
cannot record additionally or edit.
• Even if DVD-RW (VR mode) is finalized, you can
record additionally or edit the disc.
• When DVD-RW/R (Video mode) is finalized, title
menu will be created automatically.
To play in other DVD players, finalize discs
recorded on this unit with the following
condition.
Mode
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
Video mode
VR mode
DVD-R
ver.2.0
Video mode
Playing discs
Disc type
Recording
Editing
Changing the SETUP menu
• The audio and video quality is getting poorer as
the Recording time becomes longer.
• This recorder cannot record CD-RW or CD-R
discs.
• DVD-RW/R and CD-RW/R discs recorded using
a personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty or if
there is dirt of condensation on the player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software publisher for more detailed information.)
• Discs recorded in Video mode on this DVD
recorder cannot record additionally using other
DVD recorders.
• A DVD-RW disc formatted with this unit cannot be
used in other DVD recorders without any recording
using this unit.
• Since the recording is made by the variable bit
rate (VBR) method, depending on the picture you
are recording, the actual remaining time for
recording may be a little shorter than the
remaining time displayed on the OSD.
After finalizing:
Getting started
Recordable
Not Recordable
Others
Español
27
Recording
Formatting a disc
Choosing the recording format of a blank disc
Video
VR
DVD-RW
DVD-RW
When inserting a blank disc, the
DVD recorder starts to initialize
the blank disc.
After that, you can record to the
disc with the recording format
selected in SETUP menu.
You are allowed to set a specified
time for chapter marks.
3
POWER
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Setup > Recording
Auto Chapter
REC
VR mode
10 minutes
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
DVD-RW Recording Format
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
Timer Programming
G
B
PLAY
1
REV
FWD
h
g
STOP
C
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
1
SETUP
TOP MENU
K
{
B
RETURN
ZOOM
L
4
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
Setup Menu
MENU/LIST
ENTER
REPEAT
2
3
4
5
Setup > Recording
mode
DVD-RW Recording Format Video
VR mode
VR
mode
Auto Chapter
10 minutes
Timer Programming
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
VR mode has been selected as the
default.
Setup
5
Playback Setting
Select “Video mode” or “VR
mode” using K / L buttons,
then press ENTER button.
The recording mode will be set.
Note
• When inserting a blank
DVD+R or DVD+RW disc,
the error message ("Disc
Error") will appear.This DVD
recorder is not compatible
with a DVD+RW/R disc.
• PLAYLIST will be created
automatically when recording
on DVD-RW in VR mode.
28
Recording
Before you start
Formatting a disc (cont’d)
6
POWER
CH
REC
MONITOR
DVD-RW Recording Format
Timer Programming
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
VR mode
OFF
5 minutes
10
minutes
10 minutes
15 minutes
30 minutes
60 minutes
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
8
SETUP
TOP MENU
K
{
“10 minutes” has been selected as
the default.
MENU/LIST
ENTER
REPEAT
B
RETURN
ZOOM
L
6
7
Getting started
Auto Chapter
TIMER
PROG.
REC MODE CLEAR
Setup > Recording
OPEN/CLOSE
DISPLAY
Connections
Select “Auto Chapter” using
K / L buttons, then press
ENTER button.
Option window will appear.
Recording
7
Playing discs
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will be put as you
specified.
8
Press SETUP button to exit.
Editing
Changing the SETUP menu
Others
Note
29
Español
• The time for chapter marks is
not accurate in Video mode.
• A blank chapter may be created depending on the remaining time of the disc.
Recording
Formatting a disc (cont’d)
Reformatting a disc
Video
VR
DVD-RW
DVD-RW
If you are using a DVD-RW disc,
by default it will be VR mode.You
can change this to Video mode
from SETUP menu.
1
4
POWER
Select “Yes” using { / B buttons, then press ENTER button.
Option window will appear.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Disc
REC
Edit
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
Finalize
B
PLAY
Disc Protect OFF ON
REV
FWD
h
Yes
g
No
STOP
C
1
SETUP
TOP MENU
K
B
RETURN
ZOOM
L
5
Select “Yes” using { / B buttons, then press ENTER button.
Formatting will start.
MENU/LIST
ENTER
REPEAT
{
* VR mode only
2
G
Format
Are you sure?
Yes
No
Setup Menu
A
SPACE
0
PQRS
7
REC MODE CLEAR
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
DISPLAY
2
3
4
5
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Disc
58%
Edit
Formatting
Format
Finalize
Disc Protect OFF ON
6
Formatting is complete.
100% will be indicated.
* VR mode only
3
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
100%
Formatting
Disc
This operation may take a
while to be completed.
Edit
Format
Finalize
Disc Protect OFF ON
Yes
* VR mode only
30
No
Note
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format
at step 5, select "No".
Recording
Before you start
Basic recording
Video
VR
DVD-RW
DVD-RW
DVD-R
Follow the steps below to record
TV programs.
Select a desired channel to
record using CH K / L buttons or number buttons.
4
CH
REC
MONITOR
CH 1
2
5
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
WXYZ
9
CM SKIP
PAUSE
G
B
5
FWD
h
g
STOP
C
TOP MENU
K
MENU/LIST
6
ENTER
{
5
4
SKIP
H
REV
REPEAT
B
RETURN
ZOOM
L
Press REC button to start
recording.
REC mark will be displayed for 5
seconds.
Recording
SP 2:01 Rem.
TUV
8
SPACE
0
PQRS
7
F
SETUP
Select a recording speed
using REC MODE button.
A
PLAY
This operation may take a
while to be recognized.
2
TIMER
PROG.
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
Press STOP C button to stop
the recording.
This operation may take a
while to be completed.
Español
31
Others
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“VR mode” has been selected as
the default. Refer to “Choosing
the recording format of a blank
disc” on pages 28-29.
6
Changing the SETUP menu
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 28-30.
To pause the recording, press
PAUSE F button. Press REC button to restart the recording.
Editing
3
I
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• When you record a TV program which has Stereo and
SAP audio on a DVD-RW/R
(Video mode), you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel
audio will be recorded. Refer
to “Selecting the TV stereo or
SAP” on page 20 for more
details.
• You cannot mix two formats
on one DVD-RW disc.
When you load a disc once
recorded before, the recording format cannot be changed
even if you change it in
SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
Playing discs
Note
Refer to “Recording speed” on
page 26.
Getting started
Turn on the DVD recorder
and load a recordable disc.
Make sure that the TV input is set
on the DVD recorder.
POWER
Connections
1
4
Recording
Basic recording (cont’d)
Checking the recording picture quality
Video
VR
DVD-RW
DVD-RW
DVD-R
You can confirm the recording picture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
1
While the DVD recorder is in
STOP or REC with a DVD
disc to record inserted, press
REC MONITOR button.
The TV program will be on the
screen in the recording picture
quality with the recording speed
you have selected.
POWER
2
Press REC MONITOR button
again to exit.
1
2
1
CH
REC
MONITOR
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
A
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
OPEN/CLOSE
SPACE
0
PAUSE
CM SKIP
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
CH 18
Rec Monitor
XP
If you want to change the
recording speed, press REC
MODE button repeatedly.
The recording speed will be
changed as you press the button
as shown. Refer to “Recording
speed” on page 26.
• You cannot change the recording speed during recording.
XP
SP
LP
SEP
SLP
EP
Note
• You cannot check the recording sound with the Rec monitor function.
32
Recording
Before you start
One-touch timer recording
Video
VR
DVD-RW
DVD-RW
DVD-R
Turn on the DVD recorder
and load a recordable disc.
Make sure that the TV input is set
on the DVD recorder.
Select a desired channel to
record using CH K / L buttons or number buttons.
POWER
4
CH
REC
MONITOR
5
Press REC button, then press
REC button repeatedly until a
desired recording time (30
minutes to 4 hours) appears
on the TV screen.
Recording will start.
2
5
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
5
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Recording
This operation may take a
while to be recognized.
2
3
(Normal Recording) 1:00
4:00
3:30
When the DVD recorder reaches
the specified time, it will be
turned off automatically.
To change the recording length
during the one touch timer
recording, press REC button
repeatedly until the desired length
appear.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
while to be completed.
Note
• The remaining recording time
will appear on the display
panel during an one-touch
timer recording. Press DISPLAY button to see it on the
TV screen.
• You cannot pause a one-touch
timer recording.
• Unlike a timer recording, you
can perform the following
operations during a one-touch
timer recording.
- Turning the power off
- Using REC, STOP C, or
RETURN buttons.
• The unit will be turned off
automatically under the following conditions.
1) No space remained on the
disc.
2) When a power failure
occurs.
33
Others
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
0:30
Changing the SETUP menu
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"VR mode" has been selected as
the default. Refer to pages 28-29
"Choosing the recording format
of a blank disc."
0:30
Editing
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 28-30.
I
Playing discs
Select a recording speed
using REC MODE button.
Refer to "Recording speed" on
page 26.
Getting started
1
4
Connections
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
Recording
Timer recording
Video
VR
DVD-RW
DVD-RW
DVD-R
You can program the unit to
record up to 8 programs, up to a
year in advance. Daily or weekly
program recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
POWER
Setup > Recording > Timer Programming
Date
1. - - 2. - - 3. - - 4
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
You can choose the timer
programming menu by pressing TIMER PROG. button. In
this case, continue with step 5.
Start
End
CH
Speed
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
Select the program which is
not set up using K / L buttons, then press ENTER button.
H
B
FWD
h
g
STOP
C
1
6
SETUP
TOP MENU
K
B
RETURN
ZOOM
L
Setup > Recording > Timer Programming
Date
Start
1. JAN / 01 - - : - -AM
2. - - 3. - - 4. - - -
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
End
CH
- - : - -AM CH8
MENU/LIST
ENTER
REPEAT
Enter the date using K / L
buttons, then press B button.
2
G
PLAY
REV
{
Setup Menu
A
SPACE
0
PQRS
7
REC MODE CLEAR
5
OPEN/CLOSE
DISPLAY
Speed
e.g. January 1st
2
3
4
5
6
7
JAN/01
L
Setup
Daily
L
MON-SAT
When pressing L button at the
current date, timer recording
mode will change as follows.
L
MON-FRI
L
SAT
Playback Setting
L
L
3
FRI
Note
L
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
Timer Programming
VR mode
10 minutes
SUN
L
DEC/31
7
Enter the time to start and
to end using K / L buttons,
then press B button.
Setup > Recording > Timer Programming
Date
Start
1. JAN/12 10 :00PM
2. - - 3. - - 4
34
End
CH
- - : - -AM CH8
Speed
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 21 or
“Manual Clock Setting” on
page 22 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
Recording
Before you start
Timer recording (cont’d)
10
Select the channel number to
record using K / L buttons,
then press B button.
Press ENTER button when all
information required is
entered. Your program setting
will be stored.
• To set another program, repeat
steps 5 to 10.
• To exit, press SETUP button.
Setup > Recording > Timer Programming
Date
Start
1. JAN/12 10:00PM
2. - - -
End
CH
10:30PM CH8
Speed
9
Select a recording speed
using K / L buttons.
11
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
SPACE
0
PAUSE
A
CM SKIP
SKIP
F
H
G
B
PLAY
REV
11
FWD
h
g
STOP
C
SETUP
Press POWER button to turn
off.
indicator will appear on
the front display.
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Setup > Recording > Timer Programming
End
CH
10:30PM CH8
Speed
XP
Note
Refer to “Recording speed” on
page 26.
4
Press POWER button so that
indicator disappears from
the front display.
To clear the timer programming,
select your desired program
using K / L buttons.Then,
CLEAR button.
POWER
1
6
CH
REC
MONITOR
2
Press TIMER PROG. button.
Timer Programming list will appear.
Date
Start
1. JAN/12 10:00PM
2. - - -
End
CH
10:30PM CH8
Speed
XP
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
4
REC
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
ENTER
{
5
MENU/LIST
B
RETURN
ZOOM
4
L
Press TIMER PROG. button to exit.
6
Press POWER button to return
to the timer standby mode.
To stop the timer recording in process
35
Español
Press C (STOP) button on the front panel of the main unit.
STOP C button on the remote control is not effective.
Note
• Press TIMER PROG. button to
check the timer programming
in process.
When the timer recording is
proceeding, that program will
be highlighted with red. In this
case, you cannot select any
other program.
Others
Check the information on the
list you will need.
CM SKIP
SKIP
F
REPEAT
3
SPACE
0
PAUSE
A
2
5
Changing the SETUP menu
Setup > Recording > Timer Programming
To correct the timer programming, select your desired program using K / L buttons.Then,
press ENTER button. Next, correct the timer programming by using
press K/L/{/B buttons.
Finally, press ENTER button again.
OPEN/CLOSE
DISPLAY
Editing
1
Playing discs
Checking, canceling, or correcting the timer programming
information
• After step 11, the DVD
recorder will be turned on
automatically 2 minutes in
advance of the recording time
to start and waits to start.
Then the recording will start
at the recording time you set.
Recording
Date
Start
1. JAN/12 10:00PM
2. - - -
8
9
10
Getting started
To record from external input, L1
or L2.
POWER
Connections
8
Recording
Timer recording (cont’d)
Hints for timer recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the
indicator flashes and timer recording cannot be performed. Please insert a recordable disc.
• When all the timer recording is completed, the
indicator flashes.To play or eject the recorded disc, press POWER
button first, and then press PLAY B or OPEN/CLOSE A button.
• During timer recording or timer standby (
indicator is on the front display), any operations on the unit will not be
available.To make these operations available, cancel the timer recording or timer standby first (
indicator disappears).
• To cancel the timer standby mode, press POWER button.
• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc
reaches at the end during the recording, the DVD recorder turns itself off.
• When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year.
• If your programmed Start time is within 2 minutes from the current time, the power will turn on for recording standby
right after you turn the power off.
• If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn
the power off.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When the starting time is the same:
A program set previously (PROG. 1) has priority.
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. 2) has priority.
ex. 2
ex.1
PROG. 1
PROG. 1
PROG. 2
PROG. 2
PROG. 3
Actual
PROG. 1
PROG. 2
recording
The first 30 seconds (at the longest) will be cut off
Actual
PROG. 1
PROG. 2
recording
The first 30 seconds (at the longest) will be cut off
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 is complete to be recorded.
However, PROG. 1 will be recorded if you turn the power off for timer standby within 2 minutes
to the Start time for PROG. 1.
PROG. 1
Note
PROG. 2
• When the recording time of
two programs are overlapped,
or the End time of a program
and the Start time of another
is the same, the first 30 seconds (at the longest) of the
subsequent program will be
cut off.
Actual
PROG. 2
PROG. 1
recording
The first 30 seconds (at the longest) will be cut off
When the recording time is entirely overlapped:
However, if you turn the power off for timer standby within 2 minutes
to the Start time for PROG. 1, PROG. 1 will be recorded first, and the
recording of PROG. 2 will start after the recording of PROG. 1 is completed.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
When the End time of the programming currently being recorded and the Start time
of the subsequent program are same:
If PROG. 1 is a DVD recording program, the beginning of the PROG. 2 may be cut off.
The amount of time cut off differs depending on the recorded media.
For example, if both PROG. 1 and PROG. 2 are DVD recordings, the first 30 seconds (at the longest) will be cut off PROG.
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 2
The first 30 seconds (at the longest) will be cut off.
36
Recording
Before you start
Settings for an external source
Connection to an external source
Video
VR
DVD-RW
DVD-RW
DVD-R
Another source
(VCR camcorder etc.)
OUTPUT
S- VIDEO
VIDEO AUDIO
L
OUTPUT
AUDIO
R
R
VIDEO S -VIDEO
L
or
or
Audio
cable
Audio
cable
Getting started
S-Video Video
cable cable
Connections
Connect the external source properly to the DVD recorder by using input jacks either LINE2 (Front) or
LINE1 (Rear).
Use commercially available S-Video or Video cable and an Audio cable for this connection.
Video S-Video
cable cable
or
INPUT
R AUDIO
Front of DVD recorder
REC/OTR
(L1)
VIDEO
S-VIDEO
To LINE 1 IN
Recording
To LINE 2 IN
L
Rear of DVD recorder
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
R
TV ANTENNA
OUTPUT
1
OPEN/CLOSE
VIDEO
L
AUDIO
Y
S-VIDEO
2
PB/CB
PR/CR
INPUT
COAXIAL
Setup > Select Video
L
(L1)
VIDEO
S-VIDEO
COMPONENT
VIDEO OUTPUT
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B
buttons, then press ENTER button.
Setup > Select Video
L1 (Rear)
Video In
L1 (Rear)
Video In
L2 (Front)
Video In
L2 (Front)
Video In
L2 (Front)
Setup > Select Video
Video
Video
In In
S-Video
Video In
Setup > Select Video
L2 (Front)
Video
Video
In In
S-Video
Video In
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO INPUT, select “S-Video
In”.
If you want to use VIDEO INPUT (Composite),
select “Video In”.
Others
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO INPUT, select “S-Video
In”.
If you want to use VIDEO INPUT (Composite),
select “Video In”.
L1 (Rear)
Changing the SETUP menu
Setup > Select Video
4. Select “L1 (Rear)” using K / L buttons, then
press ENTER button.
Editing
4. Select “L2 (Front)” using K / L buttons, then
press ENTER button.
L1 (Rear)
Playing discs
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B
buttons, then press ENTER button.
R AUDIO
Setup > Select Video
L1 (Rear)
Video In
L1 (Rear)
S-Video In
L2 (Front)
S-Video In
L2 (Front)
Video In
Español
37
Recording
Settings for an external source (cont’d)
Recording from an external source
Video
VR
DVD-RW
DVD-RW
DVD-R
Before recording from an external source, see the instructions for the connection on page 37.
1. Turn the TV and the DVD recorder on, and be sure to select
the input of the TV to which the DVD recorder is connected.
2. Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
POWER
1
CH
REC
MONITOR
This operation may take a while to be recognized.
3. Press OPEN/CLOSE A button to close the disc tray.
4. Select the input of the DVD recorder which the external
equipment is connected. (L2 or L1)
• To use the input jacks on the back of this unit, select “L1” position by
pressing [0], [0], [1] on the remote control or the CH L / K buttons.
• To use the input jacks on the front of this unit, select “L2” position by
pressing [0], [0], [2] on the remote control or the CH L / K buttons.
5. Select a recording speed using REC MODE button. Refer to
“Recording speed” on page 26.
XP
SP
LP
SEP
SLP
EP
6. Press REC button on the DVD recorder to start recording.
7. Press Play button on the external source to record from.
8. Press STOP C button on the DVD recorder to stop recording.
This operation may take a while to be completed.
38
5
6
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
A
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
REC MODE CLEAR
REC
OPEN/CLOSE
PAUSE
2
3
4
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
8
Recording
Before you start
Finalizing the discs
Video
VR
DVD-RW
DVD-RW
DVD-R
4
POWER
Select “Yes” using { / B buttons, then press ENTER button.
Finalizing will start.
CH
REC
MONITOR
1
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
SPACE
0
PAUSE
F
H
PLAY
REV
FWD
h
g
STOP
C
Finalizing
SETUP
1
TOP MENU
K
{
B
RETURN
L
To cancel finalizing...
Edit
Format
Disc Protect OFF ON
Finalizing is complete.
3
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
Finalizing
Edit
Format
Disc
Finalize
Disc Protect OFF ON
Yes
Edit
No
This operation may take a
while to be completed.
Format
Undo Finalize
To release the finalizing for the
disc, select “Undo Finalize” at
step 3.
39
Español
* VR mode only
Others
100%
Disc
Changing the SETUP menu
5
* VR mode only
Note
• Finalizing discs in Video mode
automatically creates title
menus.
• Once you have finalized a disc
recorded in Video mode, you
cannot edit or record anything
else on that disc.
Discs recorded in VR mode can
still be recorded and edited on
this recorder even after being
finalized.
• When you insert a DVD-RW
disc finalized with this DVD
recorder,“Undo Finalize” will
appear instead of “Finalize”.
Editing
Finalize
Playing discs
Disc
4
2
3
4
Recording
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
• To cancel finalizing at step 4,
press STOP C button, select
“YES”, then press ENTER
button. Finalizing is cancelled
and the DVD recorder will
be in stop mode.
• If
appear when pressing
STOP button, you cannot cancel
finalizing because the finalizing
has been in certain progress.
• When selecting “No” and press
ENTER or RETURN button,
finalizing will be continued.
• You cannot cancel finalizing the
DVD-R disc when it has been
started.
MENU/LIST
ENTER
REPEAT
ZOOM
2
G
B
58%
Setup Menu
CM SKIP
SKIP
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
A
DEF
3
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
Connections
You will need to finalize the discs
recorded in Video mode to play in
other DVD players.
Details are on pages 26-27.
Recording
Setting a disc to protect
VR
DVD-RW
To prevent accidental recording,
editing, or erasing the titles, you
can protect them from DISC
menu.
3
POWER
Select “Disc Protect OFF ➔
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
1
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Disc
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
Edit
A
SPACE
0
PQRS
7
REC MODE CLEAR
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
DISPLAY
H
Format
G
B
PLAY
Finalize
Disc Protect OFF
Yes
REV
FWD
h
ON
g
STOP
C
No
SETUP
1
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
4
Setup Menu
Select “Yes” using { / B buttons, then press ENTER button.
A disc will be protected.
2
3
4
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
58%
Disc
Writing to Disc
Edit
Format
Finalize
Disc Protect OFF ON
This operation may take a
while to be completed.
Note
• The Disc Protect setting is
available only when a disc
with VR mode is inserted.
To cancel the disc protect:
• When you insert a disc protected with this unit, “Disc
Protect ON → OFF” will
appear instead of “OFF →
ON”.
Disc
Edit
Format
Finalize
Disc Protect ON
Yes
OFF
No
To release the protect for the
disc, select “Disc Protect ON
→ OFF” at step 3, then select
“Yes”.
40
Playing discs
Before you attempt to play DVD discs, read the following information.
Color systems
This DVD recorder is compatible to play the following discs.
To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as
described below. Discs that have the following logos
will play on the DVD recorder. Other Disc types
are not guaranteed to play.
DVDs are recorded in different color systems
throughout the world.The most common color system is NTSC (which is used primarily in the United
States and Canada).
This DVD Recorder uses NTSC, so DVDs you play
must be recorded in the NTSC system.You cannot
play DVDs recorded in other color system .
Logo
Region codes
DVD-RW (VIDEO/VR mode)
DVD-R (VIDEO mode)
DVD+RW (VIDEO mode)
Recording
This DVD recorder has been designed to play DVD
discs with Region One (1). DVDs must be labeled
for ALL regions or for Region 1 in order to play on
the DVD recorder.You cannot play DVDs that are
labeled for other regions. Look for the symbols
below on your DVDs. If these region symbols do
not appear on your DVD, you cannot play the DVD
in this DVD recorder.
DVD VIDEO
Getting started
Disc
Connections
Playable discs
Before you start
Information on DVD play
DVD+R (VIDEO mode)
CD-DA (AUDIO CD)
CD-RW (CD-DA FORMAT, MP3 files)
Hint for DVD playback
Playing discs
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play on
the DVD recorder with the same region code.
The contents of DVD disc are generally divided into
titles.Titles may be further subdivided into chapters.
Start Rec.
Title 1
Stop Rec.
Title 2
Changing the SETUP menu
Note:
The following discs can be played on this unit but
their performance is not guaranteed :
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
• DVD-R General Ver 2.0 / 8x
Stop/Start
Editing
CD-R (CD-DA FORMAT, MP3 files)
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Guide to displays
3
1
1
1
00:00:00
DVD-RW
Video mode
4
2
2. Indicates a recording speed
and possible recording time. /
Indicates a channel number.
3. Indicates a title number, chapter number, and the time
lapse of disc play.
4. Each icon means:
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
Español
SP 1:25 Rem.
1. Indicates a disc type and a
format mode.
Others
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
: Noise Reduction
: Zoom
41
Playing discs
Basic playback
Playback
Video
VR
DVD-RW
DVD-RW
VR mode:
DVD-R
Original
1
1
Press POWER button on the
remote control or the front
panel of the DVD recorder.
When you are playing a DVD, turn
the TV on and be sure to select
the input to which the DVD
recorder is connected.
JAN/1 12:00AM
4
POWER
1
2
JAN/1 1:00AM
3
1
JAN/1 2:00AM
CH
5
REC
MONITOR
JAN/1 3:00AM
JAN/1 4:00AM
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
MENU / LIST button
OPEN/CLOSE
DISPLAY
PAUSE
2
4
7
SKIP
F
H
G
B
PLAY
Playlist
2
1
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
JAN/1 12:00AM
4
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
5
REV
7
5
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
3
JAN/1 3:00AM
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
5
6
JAN/1 4:00AM
6
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playing will start.
7
disc
tray
guide
This operation may take a
while to be recognized.
4
Press OPEN/CLOSE A button to close the disc tray.
5
To eject the disc, press
OPEN/CLOSE A button to open
the disc tray, then remove the disc
before turning the DVD recorder
off.
Note
• For DVD-R (Video mode)
and DVD-RW (Video mode)
discs which are already finalized, a title list will be displayed instead of thumbnails.
Title Menu
1 JAN/1
Press TOP MENU button to
display the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU / LIST button.
Video mode:
Title List
1
JAN/1 12:00AM
4
JAN/1 3:00AM
42
Press STOP C button to stop
play.
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
5
JAN/1 4:00AM
12:24AM
CH96
XP
2
3
4
5
6
7
8
• You can resume play from
where you stopped playing
the disc. (Resume play)
Refer to page 46 for details
about resume play.
• Some discs may start playing
automatically.
Playing discs
DVD-V
CD
MP3
1
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
POWER
1
CH
REC
MONITOR
4
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
SPACE
0
PAUSE
CM SKIP
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
2
SETUP
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
If you are playing a DVD-Video
disc, a menu may appear.
Refer to pages 44-45 for details
about a disc menu.
Press STOP C button to stop
playing.
TOP MENU
K
MENU/LIST
4
5
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Note
• Some discs may start playing
automatically.
1
In stop mode, press TOP
MENU button to call up the
MP3 menu.
REC MODE CLEAR
REC
SPACE
0
PAUSE
F
H
PLAY
REV
FWD
h
1
g
STOP
C
SETUP
TOP MENU
K
1/ 2
• To exit the menu, press TOP
MENU button again.
2
ENTER
REPEAT
When selecting track:
Playback will start.
2
L
Note
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT
deck.
• Files whose extension is
other than “.mp3(MP3)” will
not be listed in the MP3
menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the recording status.
43
Español
When selecting the folder:
The files in folder will appear. Press
This unit recommends the files recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 112kbps - 320kbps.
B
RETURN
ZOOM
Others
Press K / L buttons to select a
desired folder (group) or track,
then press ENTER button.
MENU/LIST
Changing the SETUP menu
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
icon.
• Folders are accompanied by
• MP3 files are accompanied by icon.
Reproduction will start from the selected track and go to the next one in turn.
• The system can recognize up to 255
groups (or folders) and up to 255 tracks.
• The name of group and track can
be displayed in up to 32 characters. Unrecognizable characters
will be replaced with asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
G
B
{
DISC NAME
CM SKIP
SKIP
Editing
List of MP3 Files
K / L buttons to select the track or folder you want, then press ENTER button.
• Press PLAY B, ENTER or B button
to move to the lower hierarchies.
• Press s button or RETURN
button to the previous hierarchy.
• Press STOP button to return to
the first item.
Playing discs
For MP3 playback
Recording
5
2
Getting started
Press PLAY B button to start
playing.
Playing will start.
A
DEF
3
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
Connections
Press POWER button on the
remote control or the front
panel of the DVD recorder.
When you are playing a DVD, turn
the TV on and be sure to select
the input to which the DVD
recorder is connected.
3
Before you start
Basic playback (cont’d)
Playing discs
Basic playback (cont’d)
Playing discs using the disc menu
DVD-V
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the playback. For example, the menu may
offer choices for subtitle languages, special features, or chapter
selection.
Sometimes these are displayed
automatically when you start playback, otherwise only appear when
you press MENU / LIST button.
1
Press MENU / LIST button.
The DVD main menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
POWER
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
PAUSE
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K / L / { / B buttons:
Moves the cursor around screen.
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
button after.)
3
Press MENU / LIST button to
exit the menu.
Note
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
44
2
SKIP
F
MENU / LIST button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
OPEN/CLOSE
DISPLAY
1
2
3
2
Playing discs
Before you start
Basic playback (cont’d)
Playing discs using the title menu
DVD-V
1
If the feature is not available,
may appear on the TV screen.
POWER
Select a title to play using the
K / L / { / B buttons, then
press ENTER button.
Play will begin at the title you
selected.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
K / L / { / B buttons:
Moves the cursor around screen.
TUV
8
WXYZ
9
CM SKIP
PAUSE
2
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
1
2
3
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
2
L
Recording
Enter button:
Selects the currently highlighted
menu option.
REC
A
SPACE
0
PQRS
7
REC MODE CLEAR
TOP MENU button:
Displays the ‘Title menu’ of a
DVD disc which varies with the
disc.
OPEN/CLOSE
DISPLAY
Getting started
Press TOP MENU button.
The title menu will appear.
2
Connections
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start play at
a specific title.
Playing discs
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
button after.)
3
Press TOP MENU button to
exit the title menu.
Editing
Changing the SETUP menu
Others
Note
Español
• The TOP MENU button will
not always be active with all
DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
45
Playing discs
Special playback
Resume play
DVD-V
Video
VR
DVD-RW
DVD-RW
2
Video
DVD-R
CD
DVD+RW
DVD+R
CH
Press PLAY B button.
In a few seconds, play will resume
from the point at which it
stopped last.You can resume play
at the same point even if you turn
off the DVD recorder.
MP3
You can resume play from where
you stopped playing the disc last.
1
REC
MONITOR
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
SPACE
0
PAUSE
CM SKIP
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the play is
stopped.
During play, press STOP C
button.
The resume message will appear.
Screen:
TOP MENU
MENU/LIST
K
ENTER
REPEAT
{
B
2
1
2
RETURN
ZOOM
L
Note
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Resume ON
Fast forward / Fast reverse
CH
Video
DVD-V
CD
DVD-RW
Video
VR
DVD-RW
DVD-R
DVD+RW
DVD+R
REC
MONITOR
MP3
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
During play, press FWD D or REV E button.
Every time you press FWD D or REV E button, approximate speed
will be changed as follows. For DVD discs, sound will be output during
fast forward in x2 only if you set “Fast Forward with Audio” to “ON”
for the “Playback” setting in the SETUP menu.
Fast forward or fast reverse playback across titles (for DVD discs) or
tracks (for MP3) is not possible.
FWD
x40
g
REV
h
FWD
x20
g
REV
h
FWD
x5
g
REV
h
Normal
speed
playback
FWD
g
REV
h
FWD
x2
g
REV
h
FWD
x20
g
REV
h
For Audio CDs, approximate speed is fixed at x8 with sound.
For MP3 files, approximate speed is fixed at x16.
To return to the normal play, press PLAY B button.
x40
MNO
6
SPACE
0
PQRS
7
REC MODE CLEAR
1
46
JKL
5
GHI
4
H
G
B
PLAY
1
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
1
1
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Note
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
Playing discs
Before you start
Special playback (cont’d)
Skipping TV commercials during play
Video
VR
DVD-RW
DVD-RW
DVD-R
e.g. Press CM SKIP button once
POWER
CH
REC
MONITOR
CM Skip
30 sec.
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
A
PAUSE
SKIP
F
H
(forwarding 30 seconds.)
1
Getting started
During play, press CM SKIP
button.
Normal play will start at 30 seconds ahead from the point you
press CM SKIP button.
Every time you press CM SKIP
button, the searching point will be
extended by 30 seconds ahead.
You can press up to 6 times (180
seconds).
OPEN/CLOSE
DISPLAY
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Recording
B
Playback will restart automatically.
Video
VR
DVD-RW
DVD-RW
DVD-R
DVD+RW
Video
CD
DVD+R
MP3
2
POWER
Press PLAY B button to
resume play.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
PAUSE
SKIP
F
H
G
B
PLAY
REV
Changing the SETUP menu
1
2
OPEN/CLOSE
DISPLAY
Editing
1
During play, press PAUSE F
button.
Play will pause and sound will be
muted.
Playing discs
Pause
DVD-V
Connections
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded programs without interrupting.
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Others
Español
47
Playing discs
Special playback (cont’d)
Step by step playback
Video
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
DVD+RW
2
Video
DVD+R
POWER
Press SKIP G button
repeatedly.
The play will advance one frame
(or step) at a time when you
press the SKIP G button with
the sound muted.
1
During play, press PAUSE F
button.
Play will pause and sound will be
muted.
To play step by step backward:
Press SKIP H button repeatedly.
Every time you press the button,
the play will go backward by one
frame.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
1
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
2
3
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
3
Press PLAY B button to
resume play.
Slow forward / Slow reverse play
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+R
DVD+RW
1
POWER
During play, press PAUSE k button, then press FWD D or
REV E button.
Every time you press FWD D or REV E button, approximate speed
will be changed as follows. (The sound will remain muted.)
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
x1/4
g
REV
h
FWD
x1/8
g
REV
h
FWD
x1/16
FWD
g
g
Pause
REV
h
REV
h
FWD
x1/16
g
REV
h
To return to the normal play, press PLAY B button.
FWD
x1/8
g
REV
h
x1/2
1
1
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
FWD
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
1
1
MENU/LIST
ENTER
REPEAT
{
B
Note
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/2:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
48
Playing discs
Before you start
Special playback (cont’d)
Zoom
B
PLAY
Video
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
DVD+RW
Video
DVD+R
During play, press ZOOM button.
Zoom menu will appear.
Screen:
1
x1.2
01:23:45
x1.5
g
STOP
C
2
Select a desired zoom factor
to zoom using { / B buttons,
then press ENTER button.
The zoom area will be displayed.
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
1
B
RETURN
ZOOM
L
2
3
DVD-Video
Note
x2.0
3
B
Select a desired zoom position
using K / L / { / B buttons, then
press ENTER button.
The zoom play will start.
Recording
There are four options
(x1.0,x1.2,x1.5 and x2.0), these
are displayed excluding the current zoom rate.
• When selecting a smaller factor
than the current one, the zoom
area will not be displayed.
• To remove the zoom menu, press
ZOOM button again at step 1.
• To cancel the zoom function,
select x1.0 using { / B buttons,
then press ENTER button.
Getting started
1
FWD
h
Connections
1
REV
Marker Setup
DVD-V
VR
DVD-RW
DVD-RW
Screen for DVD:
1
Video
DVD-R
DVD+RW
DVD+R
1
DVD-Video
01:23:45
1
CH
1
2
3
4
5
6
REC
MONITOR
CD
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
REC
OPEN/CLOSE
A
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
SPACE
0
PAUSE
CM SKIP
SKIP
F
H
G
Editing
This feature allows you to assign
a specific point on a disc to be
called back later.
Playing discs
POWER
Video
B
PLAY
1
REV
Screen for CD:
FWD
h
g
STOP
C
1
1
01:23:45
1
1
2
01:23:45
3
4
5
SETUP
Audio CD
TOP MENU
{
B
RETURN
ZOOM
L
DVD-Video
MENU/LIST
ENTER
REPEAT
6
K
2
3
4
Note
ber using { / B buttons.
When it reaches the desired
point, press ENTER button.
2
4
To return to the marker later,
select the desired marker
number using { / B buttons,
then press ENTER button.
49
Español
Select
icon using { / B
buttons, then press ENTER
button.
Marker setup menu will appear.
Others
3
Select a desired marker num-
• To clear a marker, select the
marker number to be cleared,
then press CLEAR button.
• All markers will be erased
when you operate these operations listed below.
– Opening the disc tray.
– Turning off the power.
– Recording to a recordable
disc.
– Changing the mode between
Original and Playlist.(VR mode)
• You can mark up to 6 points.
Changing the SETUP menu
During play, press DISPLAY
button.
The display menu will appear.
Screen:
Playing discs
Search
Title/Chapter search
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+RW
DVD+R
POWER
Using SKIP H / G buttons
1
CH
During play, press SKIP G button to skip the current title or
chapter and move to the next.
The title or chapter will move forward by one at a time.
REC
MONITOR
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
SPACE
0
PAUSE
CM SKIP
SKIP
F
To go back to the previous title or chapter, press SKIP H button.The
title or chapter will move backward one title at a time.
A
DEF
3
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
H
G
1
B
PLAY
REV
FWD
h
g
STOP
C
Using DISPLAY button
1
During play, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
POWER
1
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
SPACE
0
PAUSE
A
2
CM SKIP
SKIP
F
2
OPEN/CLOSE
DISPLAY
H
G
B
PLAY
REV
FWD
h
g
STOP
Select
icon using { / B buttons, then press ENTER button.
‘T’ for title will be highlighted.
C
SETUP
TOP MENU
K
ENTER
REPEAT
{
B
RETURN
ZOOM
L
Title:
Enter a desired title number to search using K / L buttons or
number buttons, then press ENTER button.
Title search will start.
Chapter:
To move to ‘C’ for chapter, press B button.
Enter a desired chapter number to search using K / L buttons
or number buttons, then press ENTER button.
Chapter search will start.
50
MENU/LIST
2
Playing discs
Before you start
Search (cont’d)
Track search
CD
MP3
CH
Using SKIP H / G buttons
REC
MONITOR
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
During play, press SKIP G button to skip the current track
and move to the next.
The track will move forward one at a time.
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
PAUSE
SKIP
F
H
G
1
B
PLAY
REV
FWD
h
g
STOP
To go back to the previous track, press SKIP H button.The track will
move backward one at a time.
C
Getting started
Using DISPLAY button
1
POWER
During play, press DISPLAY button.
The display menu will appear.
Screen:
01:23:45
CH
REC
MONITOR
Audio CD
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
A
PAUSE
Recording
1
1
OPEN/CLOSE
DISPLAY
SKIP
F
H
Connections
1
.@/:
1
G
B
2
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
3
B
RETURN
ZOOM
L
Enter a desired track number to search using K / L buttons or
number buttons, then press ENTER button.
Track search will start.
POWER
Video
VR
DVD-R
DVD-RW
DVD-RW
DVD-V
DVD+RW
Video
DVD+R
1
During play, press DISPLAY
button.
The display menu will appear.
Screen for DVD:
1
01:23:45
DVD-Video
Screen for CD:
01:23:45
Audio CD
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
Note
• Time search function is available only in the same track or
title.
51
Español
1
.@/:
1
REC MODE CLEAR
3
Enter a desired time to
search using K / L buttons or
number buttons, then press
ENTER button.
Time search will start.
TIMER
PROG.
Others
1
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title or track will be highlighted.
To move to the clock icon, press
B button.
CH
REC
MONITOR
OPEN/CLOSE
DISPLAY
Changing the SETUP menu
CD
2
1
Editing
Time search
2
3
Playing discs
Select
icon using { / B buttons, then press ENTER button.
‘T’ for track will be highlighted.
Playing discs
Repeat/Random/Program playback
Repeat play
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
CD
DVD+R
DVD+RW
MP3
The selected repeat play will start.
REC
MONITOR
Title:
The current title will be played
repeatedly. (DVD only)
REC
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
PAUSE
SKIP
F
H
G
B
PLAY
1
During play, press REPEAT
button.
Repeat menu will appear.
Screen:
1
1
01:23:45
DVD-Video
OFF
Title
Chapter
A-B
2
00:00:30
Audio CD
OFF
Track
All
A-B
114
00:00:30
MP3
OFF
Track
All
Group
2
Select a desired option to
repeat using K / L buttons,
then press ENTER button.
Chapter:
The current chapter will be played
repeatedly. (DVD only)
All:
The current disc will be played
repeatedly. (CD, MP3, DVD-RW
(VR mode) only)
A-B:
The A-B point will be played
repeatedly.
When pressing ENTER button
while A-B is highlighted, the starting point (A) will be decided.
Press ENTER button again to
select the ending point (B).
Track:
The current track will be played
repeatedly. (CD, MP3 only)
Group:
The current group will be played
repeatedly. (MP3 only)
REV
FWD
h
g
STOP
C
SETUP
1
TOP MENU
MENU/LIST
K
ENTER
REPEAT
{
B
2
RETURN
ZOOM
L
Note
• The A-B Repeat playback can
only be set with in the current title (for DVDs), or current track (for Audio CDs).
• To cancel the repeat playback,
select OFF at step 2.The
repeat setting will also be
cancelled when you stop playback.
• You cannot select “Group”
during the random playback
of MP3 files.
Random playback
REC
CD
MP3
With this function, you can play a
disc randomly instead of playing in
the original order.
1
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
Setup Menu
52
PAUSE
SKIP
F
2
H
G
B
PLAY
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
REV
FWD
h
g
STOP
C
SETUP
1
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
CD Playback Mode
Random Play
Program Play
3
Note
Select “Random Play” using
K / L buttons, then press
ENTER button.
Random play will start.
• To cancel random play, press
STOP C button twice during
random play. “Playmode OFF”
appears on the screen.
Playing discs
Before you start
Repeat/Random/Program playback (cont’d)
Program play
CD
You can program the disc to play
in your desired order.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
-- -- -- -- -- -- -- -- -- --
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
B
PLAY
REV
-- -- -- -- -- -- -- -- -- --
FWD
h
g
Total
00:00:00
C
SETUP
1
TOP MENU
K
{
B
RETURN
L
Select a desired track using K
/ L buttons, then press
ENTER button or B button.
A cursor will move to next.
2
3
4
Playing discs
CD Playback Mode > Program Play
07 - - - - - - - - - - - - - - - -
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- --
---
Recording
4
MENU/LIST
ENTER
REPEAT
ZOOM
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
5
STOP
-- -- -- -- -- -- -- -- -- --
2
G
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
Setup Menu
A
SPACE
0
PQRS
7
REC MODE CLEAR
CD Playback Mode > Program Play
OPEN/CLOSE
DISPLAY
Getting started
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
POWER
Select “Program Play” using
K / L buttons, then press
ENTER button.
Program play list will appear.
Connections
1
3
CD Playback Mode
Total
Random Play
00:04:30
Program Play
Editing
5
Note
Español
53
Others
• To erase tracks you selected,
press CLEAR button.
• You can make program settings up to 50.
• To cancel program play, press
STOP C button twice during
program play. “Playmode OFF”
appears on the screen.
• You may also select a desired
track using Number buttons
at step 4.
Changing the SETUP menu
Press PLAY B button to start
program play.
Program play will start.
Playing discs
Selecting the format of audio and video
You can select the format of audio and video as you prefer depending
on the contents of the disc you are playing.
Switching audio soundtrack
VR
DVD-V
DVD-RW
<DVD-RW VR mode>
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch them during play.
On DVD-RW discs recorded in
VR mode, you can switch to main
(L), sub audio (R) or a mix of
both (L/R).
1
1
00:00:00
DVD-RW
VR Original
POWER
1
1 Dolby Digital Dual L/R
2 Dolby Digital 2ch ----
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
PLAY
REV
FWD
1
1
01:23:45
C
SETUP
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
Audio soundtrack will switch.
1
1
00:00:00
1 Dolby Digital Dual
2 Dolby Digital 2ch
2
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
<DVD-Video>
1
1
00:00:00
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
54
DVD-Video
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
<DVD-RW VR mode>
DVD-Video
g
STOP
3
During play, press DISPLAY
button.
The display menu will appear.
Screen:
G
B
h
1
A
SPACE
0
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
2
3
4
DVD-RW
VR Original
L/R
L
R
4
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
Note
• Some discs will only allow
you to change the soundtrack from the disc’s menu.
Press TOP MENU button or
MENU / LIST button to display the disc’s menu.
• On DVD-RW discs recorded
in VR mode that may have
both a main and a sub audio
channel, you can switch to
main (L), sub audio (R) or a
mix of both (L/R).
• This unit CANNOT record in
both stereo and SAP
(Secondary Audio Program) at
the same time.
Playing discs
Before you start
Selecting the format of audio and video (cont’d)
CD
MP3
1
2
POWER
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
1
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
1
Audio CD
00:00:00
3
REC
SPACE
0
PAUSE
H
00:00:00
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
1
CM SKIP
SKIP
F
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
A
{
Audio CD
B
RETURN
ZOOM
L
L/R
L
R
2
3
Getting started
During play, press DISPLAY
button.
The display menu will appear.
Screen:
OPEN/CLOSE
DISPLAY
Connections
When playing Audio CDs or MP3
files you can switch between
stereo, just the left channel or
just the right channel.
Recording
Playing discs
Switching subtitles
VR
DVD-V
DVD-RW
POWER
2
Select
icon using { / B
buttons, then press ENTER
button.
Subtitle menu will appear.
1
1
1
00:00:00
1
CH
REC
MONITOR
REC
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
H
B
FWD
h
g
STOP
C
SETUP
TOP MENU
K
01:23:45
{
B
RETURN
L
DVD-Video
MENU/LIST
ENTER
REPEAT
2
3
• Some discs will only allow
you to change the subtitle
from the disc menu. Press
TOP MENU button or MENU
/ LIST button to display the
disc menu.
• If a 4-digit language code
appears in the subtitle menu
at step 2, please refer to the
Language code on page 95.
When selecting “OFF,” subtitle will
disappear.
55
Español
Note
Select a desired subtitle language using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
Others
3
Changing the SETUP menu
1
G
PLAY
REV
ZOOM
1
A
SPACE
0
PQRS
7
F
OFF
1 English
2 Japanese
During play, press DISPLAY
button.
The display menu will appear.
Screen:
TIMER
PROG.
REC MODE CLEAR
DVD-Video
OPEN/CLOSE
DISPLAY
Editing
Many DVD Video discs have subtitles in one or more languages –
the case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
Playing discs
Selecting the format of audio and video (cont’d)
Switching camera angles
DVD-V
Some DVD Video discs feature
scenes shot from two or more
angles, check the case for details:
it should be marked with a angle
icon if it contains multi-angle
scenes.
2
POWER
Select
icon using { / B
buttons, then press ENTER
button.
Angle will switch each time you
press ENTER button.
1
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
1
01:23:45
A
SPACE
0
PQRS
7
REC MODE CLEAR
1
OPEN/CLOSE
DISPLAY
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
DVD-Video
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
Angle icon appears when a switching camera angle is available.
Reducing block noise
DVD-V
Video
VR
DVD-RW
DVD-RW
POWER
Video
DVD-R
DVD+RW
1
DVD-Video
OFF
Type 1
Type 2
1
CH
REC
MONITOR
During play, press DISPLAY
button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
Select
icon using { / B
buttons, then press ENTER
button.
Noise Reduction menu will
appear.
56
00:00:00
DVD+R
1
2
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
3
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
This function reduces noise in the
playback picture.When playing
back discs recorded in long time
mode such as SLP or SEP mode,
select "Type 1" or "Type 2".
("Type 2" is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select "OFF".
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
Editing
Editing discs with Video mode
Title list allows you to check the titles recorded on
the disc easily.You can choose a title to play from this
screen and easily edit the titles as you prefer.
You can edit discs with Video mode for the following
items. Be sure that once you edit titles, they will not
remain as original.
• Deleting titles (Refer to page 59)
• Putting names on titles (Refer to pages 60-61)
• Setting or clearing chapter markers (Refer to page 62)
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
JAN/1 5:00AM
JAN/1 6:00AM
4
JAN/1 4:00AM
1
Note
2
7
• Once a disc is finalized, editing the disc or
recording to the disc will not be available.
(Except DVD-RW discs in VR mode.)
• A playlist is not available with the DVD-R discs
and DVD-RW discs in Video mode.
1
JAN/1 1:00AM CH12
Recording
Disc > Edit > Original
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
6
5
Playing discs
0:01:25
8 3
Getting started
1
Connections
Guide to a title list
Before you start
Information on disc editing
4
Editing
1. Titles recorded on the disc can be selected to
edit by pressing ENTER button with the cursor
on the title.
2. Protect icon, which appears when the title has
been protected.
3. The selected title thumbnails from the title list.
• The selected title will be played back automatically.
• A sound is not output.
4. The menus in here for editing titles as you prefer.The available menus depends on the disc
type and the format type.
5. The details of the title, which can be changed to
the title name you will edit.
6. Time status bar of the title.
7. The arrow icon, which means the title list
includes a next or a previous page. Press B or
{ button by following direction of the icon.
8. Playback status of the current disc.
Changing the SETUP menu
Others
Español
57
Editing
Information on disc editing (cont’d)
Editing discs with VR mode
For discs with VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Editing original titles
Editing playlists
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 63)
• Deleting parts of titles (Refer to pages 64-65)
• Putting names on titles (Refer to pages 65-66)
• Setting or clearing chapter markers (Refer to
pages 67-68)
• Setting pictures for thumbnails (Refer to pages
68-69)
• Setting titles to protect (Refer to page 70)
• Releasing titles from protecting (Refer to page 71)
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 72)
• Deleting parts of titles (Refer to pages 73-74)
• Putting names on titles (Refer to pages 74-75)
• Setting or clearing chapter markers (Refer to
pages 76-77)
• Setting pictures for thumbnails (Refer to pages
77-78)
• Adding titles to a playlist (Refer to page 79)
• Deleting a playlist (Refer to page 80)
Note
• Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer.
58
Editing
Before you start
Editing DVD-RW discs in Video mode
Deleting titles
Video
DVD-RW
3
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
1
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
G
B
1
PLAY
REV
FWD
h
g
STOP
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
C
JAN/ 1 1:00AM CH12
XP
0:01:25
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc
Edit
Format
Finalize
1
2
Disc > Edit
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
1
2
3
4
5
No
XP
0:01:25
5
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
5
1
JAN/1 4:00AM
B
RETURN
L
Changing the SETUP menu
1
{
ZOOM
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
MENU/LIST
Title Delete
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12
K
ENTER
Playing discs
Disc > Edit
TOP MENU
REPEAT
Recording
4
SETUP
1
6
Getting started
Title Delete
Edit Title Name
Chapter Mark
A
SPACE
0
PQRS
7
REC MODE CLEAR
Disc > Edit
OPEN/CLOSE
DISPLAY
Connections
You can delete titles which you
do not need anymore.
Be advised that the titles once
deleted cannot be brought back
to the disc.
When the last title in the title list
in Video mode is deleted, the disc
space to record will be increased.
JAN/1 5:00AM
Title Delete
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
Others
This operation may take a
while to be completed.
6
Español
After writing to disc is completed, press SETUP button
to exit DISC menu.
59
Editing
Editing DVD-RW discs in Video mode (cont’d)
Putting names on titles
Video
DVD-RW
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
4
POWER
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
CH
REC
MONITOR
Disc > Edit > Edit Title Name
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
TUV
8
WXYZ
9
CM SKIP
REC
PAUSE
ABC
abc
123
@!?
5
SKIP
F
1
A
SPACE
0
PQRS
7
REC MODE CLEAR
1
OPEN/CLOSE
DISPLAY
H
G
B
PLAY
REV
FWD
h
g
STOP
C
JAN/ 1 1:00AM CH12 XP
0:01:25
Disc
SETUP
1
TOP MENU
K
{
1
2
3
4
5
B
RETURN
ZOOM
Edit
MENU/LIST
ENTER
REPEAT
L
Format
Finalize
5
To enter a title name, follow
the steps of “Guide to edit
title name” on this page.
character set
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit > Edit Title Name
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
Disc > Edit
area for entering title names
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
60
When you finish entering a title
name, press ENTER button.
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
0
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
• To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in Video mode (cont’d)
6
POWER
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
ABC
abc
123
@!?
H
G
B
PLAY
REV
FWD
h
g
STOP
C
Yes
No
abc
Writing to Disc
7
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
6
Recording
This operation may take a
while to be completed.
Getting started
1
A
SPACE
0
PQRS
7
REC MODE CLEAR
Disc > Edit > Edit Title Name
OPEN/CLOSE
DISPLAY
Connections
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
7
Playing discs
After writing to disc is completed, press SETUP button
to exit DISC menu.
Editing
Changing the SETUP menu
Others
Español
61
Editing
Editing DVD-RW discs in Video mode (cont’d)
Setting or clearing chapter markers
Video
DVD-RW
You can put chapter markers in each
title. Once a chapter is marked, you can
use it for the chapter search feature.
You can set chapter markers at a specified time you selected for titles with
more than 5 minutes.
4
POWER
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
CH
REC
MONITOR
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
Format
REC
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
C
JAN/ 1 1:00AM CH12
XP
0:01:25
1
7
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
Finalize
.@/:
1
STOP
5
Edit
TIMER
PROG.
REC MODE CLEAR
Disc > Edit
OPEN/CLOSE
DISPLAY
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
3
4
5
6
Disc > Edit
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
62
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
If you select “OFF” at step 5, all
the chapter markers will be
erased.
Note
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
• You cannot select a time for
putting markers beyond a
length of a title.
• The length of chapters may
be slightly longer or shorter
than the one specified at the
step 5.
• A chapter marker may be
delayed according to the
recording content.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original)
Deleting titles
Deleting titles
VR
DVD-RW
4
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
CH
REC
MONITOR
1
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
JAN/ 1 1:00AM CH12
XP
0:01:25
Disc
Format
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Finalize
Disc Protect OFF ON
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
3
4
5
6
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
Playing discs
Disc > Edit > Original
2
No
XP
0:01:25
Editing
6
Disc > Edit
Changing the SETUP menu
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Original
Disc > Edit > Original
1
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
No
XP
Writing to Disc
7
5
JAN/1 5:00AM
.
After writing to disc is completed, press SETUP button
to exit DISC menu.
Español
JAN/1 4:00AM
Yes
JAN/ 1 1:00AM CH12
Others
1
4
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
This operation may take a
while to be completed.
Disc > Edit > Original
Recording
5
Edit
1
7
Getting started
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
TIMER
PROG.
REC MODE CLEAR
Disc > Edit > Original
1
OPEN/CLOSE
DISPLAY
Connections
When a title is deleted from an
original list in VR mode, the disc
space to record will be increased.
Be advised that the titles once
deleted cannot be brought back
to the disc.
63
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Deleting parts of titles
VR
DVD-RW
You can delete part of a title, the
disc space to record will be
increased.
Be advised that the parts once
deleted cannot be brought back
to the disc.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Finalize
Disc Protect OFF ON
XP
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
H
G
6
FWD
g
C
SETUP
TOP MENU
K
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
XP
0:00:55
Use SKIP H / G, REV E,
FWD D, PLAY B, and PAUSE F
buttons to decide the start point,
then press ENTER.Then use SKIP
H / G, REV E, FWD D,
PLAY B, and PAUSE F buttons
again to move to the end point,
and press ENTER. Press ENTER
again to start the preview.
A cursor will move to “Preview.”
You can check the preview by pressing
ENTER.
The bar at the bottom of the screen indicates the total and the elapsed time of the
title, and the area selected for deletion will
be indicated in red during the preview.
<Preview>
Edited
Start point End point
MENU/LIST
ENTER
REPEAT
{
Before
editing
64
MNO
6
A
STOP
5
JAN/1 5:00AM
JKL
5
h
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
GHI
4
REV
1
2
3
DEF
3
0:01:25
1
Original
ABC
2
PLAY
JAN/ 1 1:00AM CH12
Disc > Edit > Original
Disc > Edit
.@/:
1
F
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Format
TIMER
PROG.
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
B
5
Edit
CH
REC
MONITOR
Disc > Edit > Original
1
Disc
POWER
B
RETURN
ZOOM
L
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
7
POWER
CH
REC
MONITOR
Disc > Edit > Original
Disc > Edit > Original
1
ABC
2
REC
OPEN/CLOSE
A
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
PAUSE
CM SKIP
SKIP
F
H
G
B
PLAY
JAN/ 1 1:00AM CH12
XP
No
REV
FWD
h
g
STOP
XP
Writing to Disc
0:01:25
C
SETUP
9
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
This operation may take a
while to be completed.
B
RETURN
ZOOM
L
7
8
9
After writing to disc is completed, press SETUP button
to exit DISC menu.
Note
Putting names on titles
VR
DVD-RW
2
POWER
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Disc
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
Original
Edit
Format
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
Disc Protect OFF ON
Others
Finalize
1
Changing the SETUP menu
Disc > Edit
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
A
SPACE
0
PQRS
7
REC MODE CLEAR
1
OPEN/CLOSE
DISPLAY
Editing
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
Playing discs
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Recording
Select “Yes” using { / B buttons, then press ENTER button.
Selected area will be deleted, and
a chapter marker is created automatically where deletion is performed.
.@/:
1
REC MODE CLEAR
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
No
8
TIMER
PROG.
Getting started
Yes
JAN/ 1 1:00AM CH12
1
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
DISPLAY
Connections
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
If the thumbnail of the title is in
the deleted area, the thumbnail
will be set to the first picture of
the title.
Playback will start from the newly
created chapter marker.
Español
Instructions continue on page 66
65
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
3
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
To enter a title name, follow
the steps of “Guide to edit
title name” on this page.
character set
POWER
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
CH
REC
MONITOR
1
2
1
JAN/1 1:00AM
JAN/1 2:00AM
ABC
abc
123
@!?
1
3
JAN/1 3:00AM
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
Disc > Edit > Original > Edit Title Name
Disc > Edit > Original
OPEN/CLOSE
DISPLAY
PAUSE
6
SKIP
F
H
G
B
PLAY
4
REV
5
FWD
h
g
STOP
C
JAN/ 1 1:00AM CH12 XP
JAN/1 4:00AM
JAN/1 5:00AM
0:01:25
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
area for entering title names
When you finish entering a title
name, press ENTER button.
3
4
5
6
7
B
RETURN
ZOOM
L
7
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
Disc > Edit > Original > Edit Title Name
JAN/ 1 1:00AM CH12
SETUP
8
XP
1
0:01:25
ABC
abc
123
@!?
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
Yes
5
No
abc
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
Disc > Edit > Original > Edit Title Name
1
ABC
abc
123
@!?
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
0
Writing to Disc
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
This operation may take a
while to be completed.
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
JAN/ 1 1:00AM CH12 XP
0:01:25
66
• To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
POWER
CH
REC
MONITOR
Disc > Edit > Original
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
A
PAUSE
SKIP
F
H
G
6
B
1
PLAY
JAN/ 1 1:00AM CH12
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Edit
Format
REV
5
Disc > Edit > Original
1
Chapter 1/1
JAN/ 1 1:00AM CH12
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
No
XP
0:01:25
5
Español
JAN/1 4:00AM
XP
Yes
3
1
2
3
4
5
6
Use SKIP H / G, REV E,
FWD D, PLAY B, and PAUSE F
buttons to decide the point at
which you will create a new
chapter marker. Or, use SKIP
H / G to decide a chapter
marker that you will delete.
Select “Add” or “Delete”
accordingly using K / L buttons,
then press ENTER button.
Option window will appear.
<Add>:
F
1
2
L
6
JAN/ 1 1:00AM CH12
1
B
RETURN
ZOOM
0:01:25
Disc > Edit > Original
4
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
MENU/LIST
Others
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
K
ENTER
Changing the SETUP menu
3
TOP MENU
Editing
Original
SETUP
REPEAT
Playing discs
2
C
{
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc Protect OFF ON
Disc > Edit
g
STOP
1
Finalize
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
FWD
h
0:01:25
Recording
Disc
XP
Getting started
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
OPEN/CLOSE
DISPLAY
Connections
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the original list comes
to 999 in total, you cannot add
any more chapter markers.
JAN/1 5:00AM
Instructions continue on page 68
67
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
<Delete>:
This operation may take a
while to be completed.
Disc > Edit > Original
1
Chapter 2/2
F
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
POWER
The chapter marker which you
selected will be deleted.
<Delete>:
CH
No
XP
REC
MONITOR
Disc > Edit > Original
0:01:25
1
• You cannot delete the first
chapter marker of each title.
Chapter 2/2
7
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
No
G
B
PLAY
Select “Yes” using { / B buttons, then press ENTER button.
When you select “Add” at step 6, a
new chapter marker will be created at the point you have decided.
When you select “Delete” at step
6, the chapter marker you have
selected will be deleted.
<Add>:
Disc > Edit > Original
1
Chapter 1/1
XP
REV
FWD
h
g
STOP
Writing to Disc
This operation may take a
while to be completed.
C
SETUP
8
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
7
L
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
Setting pictures for thumbnails
VR
DVD-RW
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the
title you are playing.The beginning picture has been selected as
the default.
2
POWER
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
REC
OPEN/CLOSE
A
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
REC MODE CLEAR
Disc > Edit
1
DISPLAY
PAUSE
SKIP
F
H
G
B
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
PLAY
REV
FWD
h
g
STOP
C
1
SETUP
TOP MENU
K
{
Original
B
RETURN
ZOOM
L
Disc
MENU/LIST
ENTER
REPEAT
1
2
Edit
Format
Finalize
Disc Protect OFF ON
68
Note
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
POWER
CH
REC
MONITOR
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Disc > Edit > Original
1
4
5
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
5
PLAY
REV
No
FWD
h
g
STOP
JAN/ 1 1:00AM CH12
C
XP
Writing to Disc
7
SETUP
TOP MENU
K
Disc > Edit > Original
After writing to disc is completed, press SETUP button
to exit DISC menu.
L
3
4
5
6
Playing discs
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
7
B
RETURN
ZOOM
Recording
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
This operation may take a
while to be completed.
MENU/LIST
ENTER
REPEAT
{
4
JAN/ 1 1:00AM CH12
G
B
JAN/1 5:00AM
1
A
SPACE
0
PQRS
7
REC MODE CLEAR
Yes
JAN/1 4:00AM
TIMER
PROG.
Getting started
1
OPEN/CLOSE
DISPLAY
Connections
3
XP
0:01:25
Editing
5
Changing the SETUP menu
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, REV E, FWD D,
PLAY B, and PAUSE F buttons to decide the picture
you want to select as a
thumbnail.Then press ENTER
button.
Option window will appear.
Disc > Edit > Original
1
Yes
JAN/ 1 1:00AM CH12
Others
F
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
No
XP
0:01:25
Español
69
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting titles to protect
VR
DVD-RW
To prevent accidental editing, or
erasing the titles, you can protect
them from the original menu.
1
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
POWER
CH
REC
MONITOR
Disc > Edit > Original
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
JAN/ 1 1:00AM CH12
B
FWD
Disc
STOP
C
Edit
5
Select “Protect OFF ➔ ON”
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc Protect OFF ON
2
1
7
Disc > Edit > Original
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
g
XP
0:01:25
Finalize
G
PLAY
REV
h
Format
A
SPACE
0
PQRS
7
REC MODE CLEAR
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
OPEN/CLOSE
DISPLAY
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
3
4
5
6
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Disc > Edit > Original
1
Original
3
Yes
JAN/ 1 1:00AM CH12
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
Disc > Edit > Original
70
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
After writing to disc is completed, press SETUP button
to exit DISC menu.
To protect a whole disc
(DVD-RW VR mode Only):
Select “Disc Protect” from Disc
menu, then select “Yes”.
Refer to “Setting a disc to protect” on page 40.
Note
• The protected title will be
marked with a key icon in the
original list.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Releasing titles from protecting
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
POWER
CH
REC
MONITOR
Disc Edit > Original
2
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
REC
PAUSE
SKIP
F
H
B
FWD
g
STOP
Disc
Edit
5
Disc Protect OFF ON
C
2
Disc Edit > Original
2
B
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
3
4
5
6
No
XP
0:01:25
6
Editing
Select “Yes” using { / B buttons, then press ENTER button.
The key icon will dissappear from
the title in the original list.
Original
Changing the SETUP menu
Disc Edit > Original
3
2
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
5
JAN/1 5:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
Others
1
4
Playing discs
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
1
7
Recording
Select “Protect ON ➔ OFF”
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc > Edit
G
PLAY
h
XP
0:01:25
Finalize
WXYZ
9
CM SKIP
REV
JAN/ 1 2:00AM CH12
Format
TUV
8
SPACE
0
PQRS
7
REC MODE CLEAR
A
Getting started
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
OPEN/CLOSE
DISPLAY
Connections
You are allowed to release the
titles protecting feature once protected.
7
Español
After writing to disc is completed, press SETUP button
to exit DISC menu.
71
Editing
Editing DVD-RW discs in VR mode (Playlist)
Deleting titles
VR
DVD-RW
In VR mode, even when a title is
deleted from a Playlist, the original
title will remain in an Original list.
The disc space to record will not
be increased.
4
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Disc > Edit > Playlist
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
XP
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit > Playlist
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Original
Disc > Edit > Playlist
1
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
SKIP
F
H
G
B
PLAY
FWD
g
C
5
Select “Title Delete” using K
Disc > Edit
PAUSE
STOP
Edit
Disc Protect OFF ON
WXYZ
9
CM SKIP
h
Disc
Finalize
TUV
8
REV
0:01:25
Format
REC
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
A
SPACE
0
PQRS
7
REC MODE CLEAR
1
72
CH
REC
MONITOR
OPEN/CLOSE
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
1
7
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting parts of titles
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
POWER
CH
REC
MONITOR
Disc > Edit > Playlist
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
A
PAUSE
SKIP
F
H
G
6
B
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
PLAY
JAN/ 1 1:00AM CH12
REV
XP
C
1
5
Format
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit
buttons, then press ENTER
button.
Playlist will appear.
B
RETURN
ZOOM
L
1
2
3
4
5
6
XP
0:00:55
6
Use SKIP H / G, REV E,
FWD D, PLAY B, and PAUSE F
buttons to decide the start point,
then press ENTER.Then use SKIP
H / G, REV E, FWD D,
PLAY B, and PAUSE F buttons
again to move to the end point,
and press ENTER. Press ENTER
again to start the preview.
A cursor will move to “Preview.”
You can check the preview by
pressing ENTER.
The bar at the bottom of the
screen indicates the total and the
elapsed time of the title, and the
area selected for deletion will be
indicated in red during the preview.
Changing the SETUP menu
3
Select “PlayList” using { / B
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
MENU/LIST
Editing
Original
K
ENTER
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
<Preview>
4
JAN/1 4:00AM
5
Add New
Title
Delete
Playlist
Others
Disc > Edit > Playlist
1
Playing discs
2
TOP MENU
{
Finalize
Disc Protect OFF ON
SETUP
REPEAT
Recording
Edit
g
STOP
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc
FWD
h
0:01:25
Getting started
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
OPEN/CLOSE
DISPLAY
Connections
You can delete a specific part of a
title.
Even when a title is deleted from
the playlist, the original title will
remain.
The disc space to record will not
be increased.
Start point End point
Before
editing
JAN/1 5:00AM
Español
Edited
Instructions continue on page 74
73
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Part of a title will be deleted.
POWER
7
OPEN/CLOSE
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
A
Disc > Edit > Playlist
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
1
Yes
JAN/ 1 1:00AM CH12
CH
REC
MONITOR
No
XP
Writing to Disc
REC
Disc > Edit > Playlist
1
WXYZ
9
CM SKIP
PAUSE
SKIP
F
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Yes
JAN/ 1 1:00AM CH12
TUV
8
SPACE
0
PQRS
7
REC MODE CLEAR
0:01:25
B
REV
9
FWD
h
g
STOP
C
SETUP
9
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
After writing to disc is completed, press SETUP button
to exit DISC menu.
8
G
PLAY
This operation may take a
while to be completed.
No
XP
H
Select “Yes” using { / B buttons, then press ENTER button.
L
7
8
Note
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Putting names on titles
Screen:
VR
DVD-RW
Disc > Edit
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
POWER
1
Original
CH
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Edit
REC
MONITOR
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc Protect OFF ON
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
Disc > Edit > Playlist
1
SPACE
0
PAUSE
3
H
4
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
74
JAN/1 4:00AM
JAN/1 2:00AM
5
JAN/1 5:00AM
JAN/1 3:00AM
Add New
Title
Delete
Playlist
G
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
B
RETURN
ZOOM
L
JAN/1 1:00AM
CM SKIP
B
{
1
2
A
SKIP
F
1
Format
Finalize
TIMER
PROG.
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
1
2
3
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
7
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
POWER
1
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
CH
REC
MONITOR
REC
Disc > Edit > Playlist > Edit Title Name
1
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
ABC
abc
123
@!?
H
G
B
PLAY
REV
FWD
h
g
STOP
C
JAN/ 1 1:00AM CH12
XP
Yes
0:01:25
No
abc
SETUP
8
TOP MENU
Writing to Disc
K
MENU/LIST
{
B
RETURN
ZOOM
L
5
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
8
After writing to disc is completed, press SETUP to exit
DISC menu.
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
0
abc
123
@!?
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
To enter a title name, follow
the steps of “Guide to edit
title name” on this page.
character set
Disc > Edit > Playlist > Edit Title Name
1
ABC
abc
123
@!?
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
0:01:25
area for entering title names
• To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Español
When you finish entering a title
name, press ENTER button.
Others
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
JAN/ 1 1:00AM CH12 XP
Changing the SETUP menu
ABC
<space>
Editing
Select
Press
6
Playing discs
Disc > Edit > Playlist > Edit Title Name
This operation may take a
while to be completed.
Recording
4
5
6
7
ENTER
REPEAT
Getting started
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
A
SPACE
0
PQRS
7
REC MODE CLEAR
Disc > Edit > Playlist
OPEN/CLOSE
DISPLAY
Connections
4
75
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add any
more chapter markers.
1
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
5
JAN/1 4:00AM
JAN/1 5:00AM
4
REC
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
XP
0:01:25
Edit
Disc Protect OFF ON
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
2
Disc > Edit > Playlist
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit
Original
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Chapter 1/1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
0:01:25
6
Use SKIP H / G, REV E,
FWD D, PLAY B, and PAUSE F
buttons to decide the point at
which you will create a new
chapter marker. Or, use SKIP
H / G to decide a chapter
marker that you will delete.
Select “Add” or “Delete”
accordingly using K / L buttons,
then press ENTER button.
Option window will appear.
<Add>:
Disc > Edit > Playlist
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
F
Yes
JAN/ 1 1:00AM CH12
76
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
No
XP
0:01:25
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
PAUSE
SKIP
F
H
G
6
B
PLAY
REV
FWD
h
g
STOP
C
1
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
OPEN/CLOSE
DISPLAY
REC MODE CLEAR
Disc
Finalize
CH
REC
MONITOR
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Format
POWER
B
RETURN
ZOOM
L
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
<Delete>:
This operation may take a
while to be completed.
Disc > Edit > Playlist
1
F
Yes
JAN/ 1 1:00AM CH12
No
XP
CH
REC
MONITOR
Disc > Edit > Playlist
0:01:25
1
Chapter 2/2
7
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
JAN/ 1 1:00AM CH12
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
F
H
No
G
B
PLAY
XP
REV
FWD
h
g
Writing to Disc
This operation may take a
while to be completed.
A
SPACE
0
PQRS
7
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
STOP
C
SETUP
8
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
7
Getting started
• You cannot delete the first
chapter of each title.
L
Recording
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
When you select “Add” at step 6, a
new chapter marker will be created at the point you have decided.
When you select “Delete” at step
6, the chapter marker you have
selected will be deleted.
<Add>:
POWER
The chapter marker which you
selected will be deleted.
<Delete>:
Connections
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
Disc > Edit > Playlist
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
JAN/ 1 1:00AM CH12
Playing discs
1
No
XP
Writing to Disc
VR
DVD-RW
1
REC MODE CLEAR
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
REC
WXYZ
9
SPACE
0
CM SKIP
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
1
SETUP
TOP MENU
Disc > Edit
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
Others
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
TUV
8
PQRS
7
Disc
Edit
Original
Format
Finalize
Disc Protect OFF ON
Note
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
77
Español
Instructions continue on page 78
Changing the SETUP menu
You can set a picture to each title for
a thumbnail. It helps you to remember
the contents of the title you are playing.The beginning picture has been
selected as the default.
REC
MONITOR
Editing
Setting pictures for thumbnails
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
3
6
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
POWER
CH
REC
MONITOR
1
2
1
JAN/1 2:00AM
4
JAN/1 3:00AM
Add New
Title
Delete
Playlist
5
REC
Disc > Edit > Playlist
3
1
JAN/1 1:00AM
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
H
JAN/ 1 1:00AM CH12
PLAY
REV
FWD
h
g
STOP
No
XP
7
SETUP
TOP MENU
K
{
B
RETURN
L
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, REV E, FWD D,
PLAY B, and PAUSE F buttons to decide the picture
you want to select as a
thumbnail.Then press ENTER
button.
Option window will appear.
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
78
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
MENU/LIST
ENTER
REPEAT
ZOOM
Disc > Edit > Playlist
5
B
Writing to Disc
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
G
C
JAN/1 5:00AM
4
A
SPACE
0
PQRS
7
F
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/1 4:00AM
TIMER
PROG.
REC MODE CLEAR
Disc > Edit > Playlist
OPEN/CLOSE
DISPLAY
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Adding titles to a Playlist
VR
DVD-RW
4
POWER
Select “Add New Title” using
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
1
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Disc > Edit > Playlist > Add New Title
1
2
1
REC
3
WXYZ
9
CM SKIP
PAUSE
SKIP
H
G
JAN/12 5:00PM
PLAY
JAN/12 8:00PM
REV
FWD
h
g
STOP
C
Edit
Format
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
2
TOP MENU
K
MENU/LIST
ENTER
{
B
RETURN
ZOOM
L
1
2
3
4
5
Recording
5
SETUP
REPEAT
Getting started
F
1
6
Disc Protect OFF ON
TUV
8
B
JAN/10 10:30AM
Disc
Finalize
A
SPACE
0
PQRS
7
REC MODE CLEAR
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
OPEN/CLOSE
DISPLAY
Connections
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
Disc > Edit > Playlist > Add New Title
Playing discs
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
58%
Writing to Disc
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
4
JAN/1 4:00AM
3
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
To delete a title from Playlist,
refer to “Deleting titles” on page
72.
To delete a Playlist, refer to
“Deleting a Playlist” on page 80.
Español
JAN/1 4:00AM
5
JAN/12 8:00PM
Others
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
JAN/1 5:00AM
Changing the SETUP menu
Original
Editing
Disc > Edit > Playlist
JAN/1 5:00AM
79
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting a Playlist
VR
DVD-RW
A Playlist can be deleted if no
longer needed.
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
4
POWER
Select “Delete Playlist” using
K / L / { / B buttons, then
press ENTER button.
Option window will appear.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
Disc > Edit > Playlist
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
REC
A
TUV
8
WXYZ
9
SPACE
0
CM SKIP
PQRS
7
REC MODE CLEAR
1
OPEN/CLOSE
DISPLAY
PAUSE
SKIP
F
H
G
B
PLAY
REV
4
Disc
5
Edit
Format
JAN/1 4:00AM
JAN/1 5:00AM
Yes
No
Finalize
FWD
h
Add New
Title
Delete
Playlist
g
STOP
C
1
SETUP
TOP MENU
K
{
Disc Protect OFF ON
B
RETURN
ZOOM
L
5
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Select “Yes” using { / B buttons, then press ENTER button.
A Playlist will be erased.
MENU/LIST
ENTER
REPEAT
1
2
3
4
5
The unit will be in stop
mode after exiting the
DISC menu automatically.
Disc > Edit
Original
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Note
• Deleting a Playlist will not
increase the available recording time.
80
Editing
Before you start
Editing DVD-R discs
Deleting titles
DVD-R
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
POWER
CH
JAN/ 1 1:00AM CH12
XP
REC
MONITOR
0:01:25
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
REC
TUV
8
WXYZ
9
CM SKIP
PAUSE
SKIP
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
4
G
B
PLAY
REV
FWD
h
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
Edit
1
Format
Finalize
Title Delete
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12
No
XP
g
STOP
C
1
6
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
1
2
3
4
5
2
5
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Playing discs
0:01:25
Disc > Edit
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Title Delete
Edit Title Name
Chapter Mark
Yes
5
JAN/ 1 1:00AM CH12
Changing the SETUP menu
1
No
XP
Writing to Disc
JAN/1 4:00AM
JAN/1 5:00AM
3
This operation may take a
while to be completed.
Others
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Recording
Disc
H
Getting started
F
1
A
SPACE
0
PQRS
7
REC MODE CLEAR
You cannot select “Chapter Mark”.
OPEN/CLOSE
DISPLAY
Connections
You can delete titles which you
do not need, however the disc
space to record will not be
changed.
Be aware to know that the titles
once deleted cannot be brought
back to the disc.
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
Español
81
Editing
Editing DVD-R discs (cont’d)
Putting names on titles
DVD-R
You can put names on the titles
and change the names from this
menu.
The names you put on the titles
will be displayed on a titlelist.
4
Select “Edit Title Name”
POWER
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
Format
Finalize
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
CH
REC MODE CLEAR
ABC
abc
123
@!?
REC
PAUSE
A
5
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
JAN/ 1 1:00AM CH12 XP
0:01:25
5
To enter a title name, follow
Edit
TIMER
PROG.
REC
MONITOR
Disc > Edit > Edit Title Name
OPEN/CLOSE
DISPLAY
SETUP
1
7
TOP MENU
K
MENU/LIST
1
2
3
4
5
6
ENTER
REPEAT
{
B
RETURN
ZOOM
L
the steps of “Guide to edit
title name” on this page.
character set
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
2
1
3
[ Guide to edit title name ]
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
JAN/1 1:00AM
JAN/1 2:00AM
4
JAN/1 4:00AM
JAN/1 3:00AM
5
6
0
Select “Yes” using { / B buttons, then press ENTER button.
JAN/1 5:00AM
3
Disc > Edit > Edit Title Name
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
1
ABC
abc
123
@!?
Yes
No
abc
Writing to Disc
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
You cannot select “Chapter Mark”.
82
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
• To delete letters, press CLEAR button repeatedly.
Holding CLEAR button to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Changing the SETUP menu
Before you start
Tour of the SETUP menu
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
SETUP menu
Items (highlight is the default)
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
OSD Background
Transparency
100%
Set the background transparency of OSD
screen.
OSD Background
Color
1
2
3
English
Français
Español
Set the OSD screen color.
1 (Green), 2 (Blue), 3 (Red)
Auto
Bright
Dark
OFF
5 minutes
10minutes
Set the brightness of front display.
OSD Language
Screen Saver
(Change password)
Set the type of sound signal which outputs
from the digital audio output jack.
Set whether the sound recorded in 96kHz
will be down sampled in 48kHz.
Set whether DTS signal will be output or
not.
Compressing the range of sound volume.
Outputting the sound during play in fast
forward.
Set the parental level of your DVD discs.
Others
Dynamic Range
Control
Fast Forward with
Audio
Parental Lock
Dolby Digital
PCM
Stream
PCM
Auto
48kHz
96kHz
DTS
ON
OFF
ON
OFF
ON
OFF
ALL
level 8 to 1
Enter the current
four-digit password
Changing the SETUP menu
4.Parental setting
Pages 90-91
Digital Out
Set the time to work the screen saver on
the screen.
Editing
3.Audio setting
Pages 88-89
Set the language for OSD
(On Screen Display).
Playing discs
FL Dimmer
35%
25%
Recording
Audio Language
Getting started
2.Display setting
Pages 86-87
Set the language for disc menu.
Connections
1.Language setting Disc Menu Language English
French
Pages 84-85
Spanish
Contents
Set and change the password.
Note
Español
• If you change the setting in SETUP
menu, the information of contents
stays on even when the power is
switched off.
83
Changing the SETUP menu
Language setting
Press STOP button if you are playing a disc.
POWER
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
SPACE
0
PAUSE
A
4
CM SKIP
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
Setup Menu
1
5
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
4
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
84
Changing the SETUP menu
Before you start
Language setting (cont’d)
Disc Menu Language (Default : English)
Set the language for Disc Menu.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Setup > Playback
Setup > Playback
TV Aspect
TV Aspect
Original
OFF
Audio Language
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Disc Menu Language
Audio Language
Subtitle Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Setup > Playback
Setup > Playback
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Subtitle Language
OFF
Subtitle Language
TV Aspect
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Parental Lock
Disc Menu Language
Digital Out
Editing
Digital Out
4:3 Letter Box
All
OFF
English
English
Original
French
OFF
Spanish
Other
Parental Lock
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
guage
e
age
Code Input
---ON
i h A di
O
• When you finish entering
the code, press ENTER
button. Refer to the language code table on page
95.
Others
e Control
Changing the SETUP menu
If “Other” is selected, press 4-digit code using number buttons.
All
English
English
French
Original
Spanish
OFF
Other
Playing discs
Subtitle Language (Default : OFF)
Set the subtitle language.
Recording
4:3 Letter Box
All
English
4:3 Letter Box
All
Original
English
English
Original
French
OFF
Spanish
Other
Parental Lock
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
• When Original is selected, the
audio language will be in the
disc’s default language.
Getting started
Audio Language (Default : Original)
Set the Audio language.
Connections
Setup > Playback
5
Español
Press SETUP button to exit SETUP menu.
85
Changing the SETUP menu
Display setting
Press STOP button if you are playing a disc.
POWER
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
SPACE
0
PAUSE
A
CM SKIP
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
Setup Menu
1
5
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Display” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Display
OSD Background Transparency 35%
OSD Background Color
OSD Language
1
English
FL Dimmer
Bright
Screen Saver
10 minutes
4
Select a desired item using K / L buttons, then press
ENTER button.
86
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
4
Changing the SETUP menu
Setup > Display
Setup > Display
OSD Background Transparency 35%
OSD Language
1
English
FL Dimmer
Bright
Screen Saver
10 minutes
OSD Background Transparency 35%100%
85%
OSD Background Color
1
70%
OSD Language
English
50%
FL Dimmer
Bright
35%
25%
Screen Saver
10 minutes
10%
0%
Setup > Display
Setup > Display
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
1
English
OSD Background Color
OSD Language
FL Dimmer
Bright
FL Dimmer
11
2
English
3
Bright
Screen Saver
10 minutes
Screen Saver
10 minutes
OSD Language
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Recording
OSD Language (Default : English)
Set the language for OSD.
Setup > Display
Setup > Display
OSD Background Transparency 35%
OSD Background Color
1
OSD Background Color
OSD Language
English
OSD Language
FL Dimmer
Bright
FL Dimmer
Screen Saver
10 minutes
Screen Saver
1
English
English
Français
Bright
Español
10 minutes
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Setup > Display
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
FL Dimmer
Bright
FL Dimmer
Screen Saver
10 minutes
Screen Saver
OSD Language
1
English
Bright
Auto
10
minutes
Bright
Dark
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
Setup > Display
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
FL Dimmer
Bright
FL Dimmer
Screen Saver
10 minutes
Screen Saver
OSD Language
1
English
OFF
5Bright
minutes
1010
minutes
minutes
15 minutes
30 minutes
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Español
5
Press SETUP button to exit SETUP menu.
Others
Setup > Display
Changing the SETUP menu
OSD Background Transparency 35%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Editing
FL Dimmer (Default : Bright)
Set the brightness of front display.
You can choose one among “Auto”, ”Bright” and ”Dark”.
When “Auto” is selected, the display dims after 15 seconds of no use.
Playing discs
OSD Background Transparency 35%
Setup > Display
Getting started
OSD Background Color (Default : 1 Green)
Set the OSD screen color.
You can choose one among 1(Green), 2(Blue), and 3(Red).
Connections
OSD Background Color
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Before you start
Display setting (cont’d)
OSD Background Transparency (Default : 35%)
Set the background transparency of OSD screen.
You can choose one among 0% through 100%.
87
Changing the SETUP menu
Audio setting
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Press STOP button if you are playing a disc.
POWER
1
CH
REC
MONITOR
Press SETUP button to display
SETUP/DISC menu.
SETUP/DISC menu will appear.
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
REC
OPEN/CLOSE
DISPLAY
SPACE
0
PAUSE
A
CM SKIP
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
1
5
Setup Menu
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
4
Playback Setting
3
Select “Playback” using K / L /
{ / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Note
• Dynamic Range Control function is available only on the
discs which are recorded in
the Dolby Digital format.
4
Select a desired item using K / L buttons, then press
ENTER button.
Digital Out
Set the digital audio output.
Setup > Playback
TV Aspect
Setup > Playback
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Original
Subtitle Language
OFF
Subtitle Language
Parental Lock
Digital Out
88
Parental Lock
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
PCM
ON
Dolby
Digital
DTSOFF
• Select a setting using K / L
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A, B or C.
Changing the SETUP menu
A
Settings for PCM (Default : Auto)
Original
OFF
udio
Settings for Dolby Digital (Default : Stream)
English
Original
OFF
Audio
C
Settings for DTS (Default : OFF)
g
udio
OFF
PCM
ON
Dolby
Digital
ON
DTS OFF
OFF
• Select a setting using K / L buttons, then press ENTER button.
Your setting will be activated.
ON : Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to “ON”.
OFF : No DTS, signal is output.
When your amplifier/decoder is NOT compatible with DTS, set to
“OFF”.
Playing discs
Original
ntrol
Recording
PCM
ON
Dolby
Digital
PCM
Stream
DTSOFF
ontrol
• Select a setting using K / L buttons, then
Note
press ENTER button.
When playing a DVD-RW
Your setting will be activated.
disc recorded in VR mode
PCM : Convert the Dolby Digital into PCM(2
• If the audio source on a disc is
channel).
Dolby Digital format, set “Dolby
When your amplifier/decoder is NOT com- Digital” to “PCM” so that you
patible with Dolby Digital, set to “PCM”.
can switch to main (L), sub
Stream : Outputs Dolby Digital signals
audio (R), or a mix of both (L/R)
When your amplifier/decoder is compatible with your amplifier/decoder.
with Dolby Digital, set to “Stream”.
Getting started
B
age
PCM Auto
48kHz
ON
Dolby
Digital
96kHz
DTSOFF
Connections
ntrol
• Select a setting using K / L buttons, then
Note
press ENTER button.
When playing disc with copyYour setting will be activated.
right protection
Auto
: Select “Auto” usually.
• If you select “Auto”, the sound
48kHz : If your amplifier/decoder is NOT comwill be down sampled at 48kHz.
patible with 96kHz PCM, select “48kHz”. • If you select “96kHz”, no digital
96kHz sound will be output in 48kHz.
sound will be output. Select
96kHz : If your amplifier/decoder is compatible
“Auto”, so that outputting
with 96kHz PCM, select “96kHz”. 96kHz 48kHz digital sound.
sound will be output.
Before you start
Audio setting (cont’d)
Setup > Playback
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
ON
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
• Dynamic Range Control function is effective only with analog
audio connection.
Fast Forward with Audio (Default : OFF)
Set to ON to output the sound during play in fast forward of x2.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Others
Setup > Playback
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
ON
ON
OFF OFF
Español
5
Press SETUP button to exit SETUP menu.
Changing the SETUP menu
Parental Lock
Setup > Playback
4:3 Letter Box
All
English
Editing
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
89
Changing the SETUP menu
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback
will stop if the ratings exceed the levels you set, it will require
you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material.
POWER
Press STOP button if you are playing a disc.
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
REC MODE CLEAR
1
REC
SPACE
0
PAUSE
A
4
CM SKIP
SKIP
F
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
OPEN/CLOSE
DISPLAY
H
G
B
PLAY
REV
FWD
h
g
STOP
C
1
5
Setup Menu
SETUP
TOP MENU
K
MENU/LIST
ENTER
REPEAT
{
B
RETURN
ZOOM
L
2
3
4
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select “Parental Lock” using K / L buttons, then press
ENTER button.
90
Note
• Parental lock function may
not be available to some
discs.
• With some DVDs, it may be
difficult to find if they are
compatible with parental lock.
Be sure to check if the
parental lock function operates in the way that you have
set.
• Record the password in case
you forget it.
Changing the SETUP menu
Before you start
Settings for Parental lock level (cont’d)
Parental Lock (Default : All)
Set the Parental Lock level.
Setup > Playback
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Getting started
A
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear
Proceed to steps A or B.
Connections
Parental Lock
Setup > Playback
A password has not been set yet
Setup > Playback
Setup > Playback
TV Aspect
Yes
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Recording
4:3
Letter Box
Change
AllPassword?
Yes
No
8
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
Parental Lock
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
B
A password has been set already
Setup > Playback
TV Aspect
Parental Lock
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3
Letter Box
Change
AllPassword?
Yes
No
8
Parental Lock
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
• If you select “No”, proceed
to Step 5.
Setup > Playback
Yes
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Changing the SETUP menu
• Enter the current password
using Number buttons.
TV Aspect
Editing
Disc Menu Language
Change the password
Setup > Playback
4:3
All Letter Box
Password
8
All
7* * * *
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Playing discs
• If you select “No”, proceed
to Step 5.
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
Note
Press SETUP button to exit SETUP menu.
Español
91
Others
5
• Press CLEAR button to erase
numbers entered incorrectly.
• When you forget the password or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
Others
Troubleshooting
Before requesting service for this DVD recorder, check the table below for a possible cause of the problem
you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem
and restore proper operation.
Symptom
Power
The power does not turn on.
Remedy
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the braker.
Picture
Sound
There is no picture.
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• The Setup Display appears. Press RETURN
button to turn
off the display.
• Check the connection to your TV (page 13).
• Check if the INTERLACE/PROGRESSIVE mode is set correctly
according to your TV (page 13).
• Switch the input selector on your TV (such as to "LINE1") so that
the signal from the DVD recorder appears on the TV screen.
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output signal from the DVD recorder passes
through your VCR to get to your TV, or if you are connected to
a combination TV/VIDEO player, the copy-protection signal
applied to some DVD programs could affect picture quality. If
you still experience this problem even when you connect the
DVD recorder directly to your TV, try connecting the DVD
recorder to your TV's S-VIDEO input.
TV program reception does not fill the
screen.
TV program pictures are distorted.
• Try to set the channels with "Auto Preset" in SETUP menu (page 18).
• Select a channel of any TV program using the CH o / p buttons.
• Adjust TV antenna.
• Adjust the picture (see the TV's instruction manual).
• Place the DVD recorder and TV farther apart.
• Place the TV and any bunched antenna cables farther apart.
TV channels cannot be changed.
• Switch the input to TV.
• Connect the antenna cable correctly (page 13).
Playback picture is distorted
• Keep the equipment which may cause electrical disturbances,
such as a cellular phone, away.
The playback picture or TV program from
the equipment connected through the
DVD recorder is distorted.
• If the playback picture output from a DVD player,VCR, or tuner
goes through the DVD recorder before reaching your TV, the
copy-protection signal applied to some programs could affect
picture quality. Disconnect the playback equipment in question
and connect it directly to your TV.
There is no sound.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The recorder is in pause mode or in Slow-motion Play mode.
• The recorder is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL OUT (COAXIAL)
jack, check the Audio Setup settings (pages 88-89).
Sound is noisy.
• The disc is dirty or flawed.
Remote control
The remote control does not function.
92
• Batteries are weak.
• There are obstacles between the remote control and the DVD recorder.
• The remote is far from the DVD recorder.
• There are no batteries in the remote.
• Turn on the DVD recorder.
• The remote control is not pointed at the remote sensor on the
DVD recorder.
• If above remedies do not solve the problem, please call the
Service Center for help.
Others
Symptom
Playback
The disc does not play.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
The language for the sound track cannot
be changed.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when
icon does not
appear on the TV screen (page 56).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
The subtitle language cannot be changed
or turned off.
The angles cannot be changed.
Recording does not start immediately
after you press REC button.
Nothing was recorded even though you
set the timer setting correctly.
• The timer setting overlapped with another setting that was set
later or has priority (page 36).
• Disc space was not enough.
93
Español
Timer recording is not complete or did
not start from the beginning.
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the DVD recorder to automatically format a DVD-RW.
• There was a power failure during recording.
• The DVD recorder's internal clock stopped due to a power
failure that lasted for more than 30 seconds.
Reset the clock (pages 21-23).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts
copying.
• The timer setting overlapped with another setting that was set
later or has priority.
• It will take a few seconds for the DVD recorder to input disc
data before recording can stop.
Others
Recording does not stop immediately
after you press STOP C button.
• Set the TV's input to "TV."
Changing the SETUP menu
Recording/Timer recording/Editing
The channel cannot be changed from the
channel you are recording.
Editing
• The DVD VIDEO features an auto playback function.
Playing discs
The DVD recorder starts playing from the
disc automatically.
Recording
• During the playback of two layered disc, picture may freeze for
a moment when the 1st layer switches to the 2nd layer. This is
not a malfunction.
• Resume play was activated (page 46). Press STOP C button twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
Getting started
The disc does not start playback from the
beginning.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side
facing up.
• The disc is not correctly inserted.
• The DVD recorder cannot play certain discs (such as a CDROM) (page 41).
• The region code on the DVD VIDEO does not match the DVD
recorder (page 41).
• Moisture has condensed inside the DVD recorder. Remove the
disc and leave the DVD recorder turned on for about two
hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the DVD
recorder cannot play the disc if it was not finalized (page 39).
Connections
Playback image freezes for a second.
Remedy
Before you start
Troubleshooting (cont’d)
Others
Troubleshooting (cont’d)
Symptom
Remedy
Others
The DVD recorder does not operate
properly.
• When static electricity, etc., causes the DVD recorder to
operate abnormally, unplug the DVD recorder and then plug it
in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the DVD recorder is adding disc data to the
disc.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
"Repairing" appears on the display.
Repairing
Error message
Disc Error
--- Please eject the disc. --Playback feature may not be
available on this Disc.
Solution
Unplayable disc is inserted
in the DVD recorder.
The disc is upside down.
Insert the standardized disc which
bear the marks on page 41.
Insert the disc with the labeled side
facing up.
Region Error
--- Please eject the disc. --Playback is not authorized in your
region.
Playback is not authorized
in the region of the DVD-Video
disc which you inserted in the
DVD recorder.
Insert the DVD-Video disc with
region codes 1 or ALL.
Parental Lock On
--- Please eject the disc. --The current selected parental level
Prohibits playback.
The current selected parental
level in the SETUP Menu
prohibits playback.
Check the "Parental Lock" setting
(pages 90-91).
The recording function encountered
the copy prohibited program.
You cannot record copy prohibited
programs.
Recording Error
This program is not
recordable in Video mode.
You are trying to record the copyonce program onto the DVD-RW
disc in Video mode.
Set "DVD-RW Recording Format"
to "VR mode" (page 28).
Recording Error
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
The disc is dirty.
The disc is damaged.
Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements
(pages 26-27).
Clean the disc with a cleaning cloth.
Replace the disc.
You are trying to record the copyonce program onto the DVD-RW
disc which is not compatible with
CPRM.
Insert the DVD-RW disc
(ver.1.1 compatible with CPRM).
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 40).
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
Recording Error
This program is not allowed
to be recorded.
Can not record on this disc.
Recording Error
This program is not allowed to
be recorded on this disc.
Recording Error
This disc is protected and not
recordable.
Recording Error
Disc is full.
(No area for new recording)
94
Cause
Others
Before you start
Troubleshooting (cont’d)
Error message
Cause
Solution
Delete unnecessary titles
(pages 59, 63, 72).
Recording Error
You cannot record more the
999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
Delete unnecessary chapter
markers (pages 67, 76).
This disc has no space to write
the Control Information when
recording or deleting contents.
Delete unnecessary titles
(pages 59, 63, 72).
Recording Error
You cannot record on this disc
as Control Information is full.
Getting started
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
Connections
Recording Error
You cannot record more
than 99 titles on one disc.
(The maximum is 99)
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
Insert a new disc.
Recording
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
Every time you insert a disc for
recording, the disc's working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able to
record full 99 titles.
You are trying to record onto
the disc already finalized.
Release the finalizing for this disc
(page 39).
Playing discs
Recording Error
This disc is already finalized.
Language code
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Code
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
Language
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
95
Español
Code
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
Others
Language
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Changing the SETUP menu
Code
6159
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
Editing
Language
(Afan) Oromo
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Others
Glossary
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs are
4:3 (in other words, the screen is
almost square); widescreen models
are 16:9 (the screen is almost
twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on a DVD
disc is usually divided into chapters. See also Title.
Component video output
Each signal of luminance(Y) and
component(PB/CB, PR/CR) is independent to output so that you can
experience picture color as it is.
Also, due to compatibility with
progressive video (480p), you can
experience higher-density picture
than that in interlace (480i).
CPRM
(Content Protection for
Recordable Media)
CPRM is a copy protection system with scramble system regarding the recording of “copy-once”
broadcast programs (e.g. some
satellite broadcasts).
Digital audio
An indirect representation of
sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a
second for CD audio) by an analog-to-digital converter, generating
a stream of numbers. On playback,
a digital-to-analog converter generates an analog signal based on
these numbers. See also Sampling
frequency and Analog audio.
96
Dolby Digital
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound
of stereo(2ch) or multi-channel
audio (up to 5.1ch).
DTS (Digital Theater System)
DTS is a 5.1channel surround
sound system, but it is different
from Dolby Digital.The formats
were developed by Digital Theater
System, Inc.
Finalize
To make DVD discs, which have
been recorded on, possible to play
in DVD players.With this DVD
recorder, it is possible to finalize
DVD-R/DVD-RW discs.
MP3 (MPEG Audio Layer 3)
MP3 is a method of compressing
files.You can copy MP3 files on
CD-RW/R discs from the computer and play the files on this unit.
PCM
(Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data compared to formats such as Dolby
Digital and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and
AV amplifiers with digital inputs,
this unit can convert Dolby Digital
and MPEG audio to PCM. See also
Digital audio.
Playlist
From this list you can play contents of a disc as your desired
order or in sequence. Also it is
allowed to search a specific scene
directly.
Progressive Scan (480p)
A type of display that does not
split each frame into fields, and
instead scans directly through all
the scanlines of each frame in
order. Progressive Scan provides
less flickering and higher image
resolution than traditional (480i)
TV signals. Refer to page 13 for
instructions on selective
Progressive Scan mode.
Regions code
Regions associate discs and players with particular areas of the
world.This unit will only play discs
that have compatible region
codes.You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
Sampling frequency
The rate which sound is measured
by a specified interval to turn into
digital audio data.The numbers of
sampling in one second defines as
sampling frequency.The higher the
rate, the better the sound quality
as possible as it is.
SAP
(Secondary Audio Program)
Sub-audio channel which is delivered separately from main-audio
channel.This audio channel is used
as an alternate in bilingual broadcasting.
S-Video output
It delivers independently each signal
of color(C) and luminance(Y) to TV
as video signals, so that higher-quality picture will be gained.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs use tracks to divide
up the content of a disc.The DVD
equivalent is called a chapter. See
also Chapter.
Others
General
DVD-Video, DVD-RW/R, CD-DA, CD-RW/R
AC120 V, 60 Hz
23 W (standby: 4.0 W)
6.0 lbs ( 2.7 kg )
17 1/8" x 2 5/8" x 11 3/4" (435 x 66 x 297 mm)
41Fº to 104Fº (5ºC to 40ºC)
5% to 85% (no condensation)
NTSC
Recording
Recording format
13.5MHz
MPEG
48kHz
Dolby Digital
2-13ch
14-69ch
C1-C125ch
Recording
Tuner
Receivable channels
VHF
UHF
CATV
Getting started
Recordable discs
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
Video Recording format (DVD-RW only),
Video format (DVD-RW, DVD-R)
DVD-ReWritable, DVD-Recordable
Connections
System
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
Before you start
Specifications
Input/Output
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Others
500 mVp-p (75Ω)
RCA jack
Changing the SETUP menu
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks
Input 1 (rear), 2 (front) L/R
2V rms (Input impedance: more than 22kΩ)
RCA jacks
Output 1,2 L/R
2V rms (Output impedance: less than 1kΩ)
RCA jacks
Editing
VHF/UHF set 75Ω
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Output 1
1 Vp-p (75Ω)
RCA jack
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Playing discs
VHF/UHF antenna input/output terminal
Video input
Input level
Jacks
Video output
Output level
Jacks
S-Video input
Y (Iuminance) - Input level
C (color) - Input level
Jacks
S-Video output
Y (Iuminance) - Output level
C (color) - Output level
Jacks
Component video output
Output level
Jacks
Audio input
During audio input
Jacks
Audio output
During audio output
Jacks
Digital audio output
Output level
Jacks
Note:
The specifications and design of this product are subject to change without notice.
For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories,
supplies or customer assistance, please call 1-800-BE-SHARP (1-800-237-4277) or visit SHARP’s website
(http://www.sharpusa.com).
97
Español
Service Information (For the U.S.)
Español
Precaciones
Para futura referencia, anote los números de modelo y de serie (indicados en la parte posterior esta unidad) en el espacio provisto.
No. de modelo:
DV-SR45U
No. de serie:
AVISO:
PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA QUE
LA PALETA ANCHA DEL ENCHUFE COINCIDA CON LA RANURA ANCHA
E INTRODÚZCALA HASTA EL FONDO.
PRECAUCION
PELIGRO DE DESCARGA ELECTRICA NO
ABRIR DECLARACIÓN DE CONFORMIDAD
Este símbolo previene al usuario del voltaje aislado dentro de la unidad que puede provocar
descargas eléctricas peligrosas.
PRECAUCION:
TPARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA,
NO QUITE LA CUBIERTA. EL USUARIO NO DEBERA DAR
NINGUN TIPO DE SERVICIO A NINGUNA PARTE INTERNA. DEBERA SER REALIZADO SOLO POR PERSONAL DE
SERVICIO CALIFICADO.
Este símbolo advierte al usuario que existen
instrucciones de operación y de mantenimiento en la literatura incluida en esta unidad.
“ADVERTENCIA—Las reglas de la FCC (Comisión Federal de Comunicaciones)
estipulan que cualquier modificación o cambio a este equipo no aprobado expresamente por el fabricante podrá anular la autorización del usuario para operar este
equipo”.
Este dispositivo cumple con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). La operación
se encuentra sujeta a las dos condiciones siguientes:
(1) Este dispositivo no debería producir interferencias perjudiciales, y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan producir una operación
indeseable.
INFORMACION
Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivo digital de
Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas
están diseñadas para asegurar una protección razonable contra interferencias perjudiciales en las instalaciones residenciales. Este equipo genera, utiliza y puede emitir energía de radiofrecuencia y, si no se instala y utiliza debidamente,
es decir, conforme a las instrucciones, podrían producirse interferencias perjudiciales en las radiocomunicaciones. Sin
embargo, no se garantiza que estas interferencias no se produzcan en una instalación determinada. Si este equipo ocasiona interferencias en la recepción de radio o televisión, lo cual puede comprobarse con sólo apagar y encender el
equipo, intente corregir el problema mediante una o una combinación de las siguientes medidas:
—Reoriente la antena receptora o cámbiela de lugar.
—Aumente la separación entre el equipo y el receptor.
—Enchufe el equipo a una toma de corriente situada en un circuito distinto del receptor.
—Consulte a su distribuidor o a un técnico experto en radio/televisión.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
PRECAUCION:
ESTA UNIDAD HA SIDO CLASIFICADA COMO PRODUCTO CLASS 1 LASER.
EL USO DE MANDOS O AJUSTES O LA REALIZACION DE PROCEDIMIENTOS DISTINTOS DE LOS INDICADOS EN LA PRESENTE IMPLICA EL RIESGO DE EXPOSICION A UNA RADIACION PELIGROSA.
COMO LOS RAYOS LASER UTILIZADOS EN ESTA UNIDAD PUEDEN RESULTAR PERJUDICIALES PARA SUS
OJOS, NO INTENTE DESARMAR EL GABINETE. SOLICITE EL SERVICIO UNICAMENTE A PERSONAL CUALIFICADO.
98
Español
Importantes Medidas de Seguridad y Precauciones
or de cobre de antena, tamaño de los conductores tierra, ubicación de la unidad de descarga de la antena, conexión a los electrodos tierra, y requerimientos de los electrodos tierra (Fig.A).
FIGURA A
EJEMPLO DE CONEXIÓN A TIERRA DE ANTENA DE
ACUERDO CON EL CÓDIGO ELÉCTRICO NACIONAL.
CABLE DE COBRE
PARA LA ANTENA.
ABRAZADERA
DE LA ANTENA.
UNIDAD PARA LA DESCARGA
DE LA ANTENA
(NEC SECCIÓN 810-20)
EQUIPO PARA EL
SERVICIO
ELÉCTRICO
S2898A
CONDUCTORES TIERRA
(NEC SECCIÓN 810-21)
ABRAZADERA A TIERRA.
SISTEMA DE ELECTRODOS PARA EL
SUMINISTRO DE TOMA A TIERRA
(NEC ARTÍCULO 250, PARTE H)
Playing discs
Editing
Changing the SETUP menu
Others
Español
99
Recording
15) Tormentas eléctricas - Como medida adicional de protección durante tormentas eléctricas, o cuando el producto
permanezca sin uso durante períodos prolongados de tiempo, desconéctelo del tomoacorriente mural y desconecte la
antena o sistema de cable. Esto evitará que el grabador de
videocassettes resulte dañado por tormentas eléctricas o
sobretensiones en la línea de alimentación.
16) Líneas de alimentación - Un antena exterior no debe ser
instalada en la cercanía de líneas de alimentación aéreas ni
de otros circuitos de potencial para iluminación eléctrica, o
donde pueda caerse y hacer contacto con tales líneas o circuitos.Al instalar un sistema de antena exterior, enta mucho
cuidado de no tocar tales líneas o circuitos de alimentación,
ya que el contacto con ellos podría será fatal.
17) Sobrecarga - No sobrecargue los tomacorrientes murales
ni los cables de extensión, ya que esto podría causar incendios o descargas eléctricas.
18) Entrada de objetos y líquidos - Nunca introduzca objetos de
ningún tipo por las aberturas de sete producto, ya que pordría tocar peligrosos puntos de alta tensión o cortocircuitar
partes, provocando incendios o descargas elécticas. Nunca
derrame ningún tipo de líquido sobre el producto.
19) Servicio - No intente reparar el producto usted mismo; al abrir
o desmontar las cobiertas usted se expondrá a alta tensión y a
otros peligros. Solicite todo servicio a personal calificado.
20) Daños que requieran reparación - En los siguientes casos,
desconecte el producto del tomacorriente mural y llame a
un técnico de servicio calificado:
a) Cuando el cable de alimentación o la clavija estén dañados,
b) Si se ha derramado líquido sobre la unidad, o si algún
objeto ha caído dentro del producto,
c) Si el producto ha sido expuesto a la lluvia o al agua,
d) Cuando a pesar de haber sebuido las instrucciones de
operación, el producto no funcione normalmente.Ajuste
solamente los controles mencionados en el manual de
instrucciones; el ajuste incorrecto de otros controles
podrá causar daños a la unidad, la que por lo general
requerirá de un prolongado trabajo de reparación (por
un técnico calificado) para que sus condiciones normales
de operación puedan ser restablecidas,
e) Si el producto se ha caído o si el gabinete se ha dañado.
f) Cuando el producto muestre un cambio notorio en su
rendimiento.
21) Piezas de requesto - Cuando sea necesario reemplazar
piezas, asegúrese de que el técnico de servicio emplee las
piezas de requesto especificadas por el fabricante, o piezas
que tengan las mismas características que las piezas originales. Las sustituciones no autorizadas podrán causar incendios, descargas eléctricas y otoros problemas.
22) Revisión de seguridad - Al finalizar cualquier servicio de
mantenimiento o reparación de este producto, solicítele al
técnico que efectúe comprobaciones de seguridad para
determinar si el producto se encuentra o no en condiciones
óptimas de operación.
23) Calor - Este producto debe colocarse fuera del alcance de
fuentes de calor tales como radiadores, rejillas de calefacción, estufas o cualquier otro producto destinado a producir calor, incluyendo los amplificadores.
Getting started
CÓDIGO DE NEC NATIONAL ELECTRIC
Connections
1) Lea las instrucciones - Lea detenidamente todas las instrucciones de seguridad y operación antes de usar el producto.
2) Conserve las instrucciones - Conserve las instrucciones de
seguridad y operación para consultas futuras.
3) Respete las advertencias - Observe estrictamente todas las
advertencias impresas en el producto y las incluidas en el
manual de instrucciones.
4) Siga las instrucciones - Siga todas las instrucciones de operación.
5) Limpieza - Desconecte el producto del tomacorriente mural
antes de limpiarlo. No use limpiadores líquidos ni aerosol. Use
un paño húmedo para la limpieza del producto.
6) Enchufes - No use enchfes no recomendados por el fabricante del producto, ya que podría ser peligroso.
7) Agua y humedad - No use este producto cerca del agua, por ejemplo, cerca de una bañera o lavamanos, cerca del fregadero de la
cocina o lavandería, en un piso mojado, cerca de una piscina, etc.
8) Accesorios - No instale este producto en un carro, soporte,
trípode o mesa inestables. El grabador de videocassettes
podría caerse, causando serias lesiones a un niño o adulto,
resultando también severamente dañado. Uselo sólo el un
carro, soporte, trípode o mesa
ADVERTENCIA SOBRE EL USO
recomendados por el fabricante,
DE CARROS PORTÁTILES
o vendidos con el producto.Toda
instalación del producto deberán
hacerse de acuerdo a las instrucciones del fabricante, empleando
los accesorios de instalación
recomendados por el mismo.
S3125A
9) La combinación de producto y
carro debe ser movida con cuidado. Las detenciones bruscas, la fuerza excesiva y las superficies disparejas podrán
hacer que el producto y el carro se vuelquen.
10) Ventilación - El gabinete del producto tiene renuras y aberturas
de ventilación que garantizan el funcionamiento confiable del
producto, evitando que se recaliente. Estas aberturas no
deberán ser bloquear las aberturas, nunca setúe el grabador de
videocassettes encima de una cama, sofá, alfombra u otra
superficie similar. El grabador de videocassettes no debe ser
instalado en un mueble emportado, como una repisa para
libros o bastidor, a menos que se pueda garantizar una ventilación adecuada, o cuando las instrucciones del fabricante así lo
especifiquen.
11) Alimentación - Este grabador de videocassettes sólo debe
ser operado mediante el tipo de fuente de alimentación
especificado en la etiqueta indicadora. Si no seta seturo del
tipo de fuente de alimentación que tiene en su casa, consulte a su distribuidor o a la compañía de electricidad local
En el caso de grabador de doseñados para funcionar a pilas
o con otras fuentes de alimentación, consulte el manuel de
instrucciones respectivo.
12) Conexión a tierra o polarización - Este producto está equipado con una clavija polarizada de corriente alterna (una clavija
que tiene una espiga más ancha que la otra). Esta clavija solamente pordá ser insertada en el tomacorriente en una sola
dirección. Esta es una medida de seguridad. Si no puediera
insertar completamente la clavija en el tomacorriente, vuelva a
intentarlo invirtiendo la clavija. Si aún no fuera posible insertar
la clavija, tome contacto con un electricista para que repare su
tomacorriente obsoleto . No modifique las características de
seguridad de la clavija polarizada.
13) Protección del cable de alimentación - Los cables de alimentación deberán ser tendidos de manera tal que la probabilidad de que sean pisados o aplastados por otros objetos sea
mínima. Preste especial atención a las clavijas de los cables, a los
receptáculos, y al punto por donde salen del producto.
14) Conexión Tierra de una Antena Exterior: Si una antena exterior o
sistema de cable es conectado al aparato de vídeo, asegúrese de
que la antena o el cableado tenga conexión tierra para conseguir
de esta manera una protección contra voltajes no deseados y cargas estáticas. El artículo 810 del Código de Electricidad Nacional
ANSI/NFPA número 70, proporciona información acerca de la
manera adecuada de conexiones a tierra de la estructura del
mástil y la estructura soporte, sobre la unidad del cable del interi-
Before you start
Precaciones (cont.)
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de disco
Paso 2:Coloque un disco en blanco
Puede elegir entre distintos tipos de discos DVD
grabables. Elija un tipo de disco DVD grabable de
acuerdo con sus necesidades de reproducción/
grabación.Vea los "tipos de discos DVD" en la parte
inferior de esta página para más detalles sobre las
diferencias entre los distintos medios compatibles.
Este grabador de DVD puede grabar los siguientes tipos de discos.
Mando a distancia
POWER
1
CH
OPEN/CLOSE
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
JKL
MNO
2
Para abrir
A
Para
encender
4.7
* Esta unidad no puede grabar en los discos siguientes.
• DVD-RW Ver 1.2 / 2-4x compatible con CPRM
• DVD-R General Ver 2.0 / 8x
Por ejemplo, cuando desea grabar repetidamente
en el mismo disco o cuando desea editar el disco
después de grabar, seleccione el disco de tipo
regrabable DVD-RW.
Cuando desea guardar grabaciones sin alterarlos,
un DVD no regrabable DVD-R puede ser más
conveniente.
POWER
CH
OPEN/CLOSE
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
JKL
MNO
A
3
Para cerrar
Cargando
Esta operación puede
demorar en reconocerse.
Tipos de disco DVD
Formato del disco
.
Coloque el disco en el
grabador. Haga el formato del
disco del menú SETUP, existen los formatos de video
(modo de Video) o de
grabación de video (modo
VR) según el tipo de disco
colocado. Esto es necesario
para preparar el disco para
grabación.Vea los detalles en
las páginas 28-30.
* Al formatear, todo el contenido de ese disco se borrarán.
• La unidad empieza a formatear automáticamente
cuando se inserta un disco
no usado.
: Más adecuado
: Puede utilizar
: Algunas funciones son limitadas
Desea
DVD-RW VR
: No puede utilizar
DVD-RW Video
DVD-R
DVD-RW VR
DVD-RW Video
DVD-R
¿Regrabable?
Sí
Sí
No
Puede crear capítulos a intervalos fijos (auto.)
Sí
Sí
Sí
Puede crear capítulos donde desee (manual)
Sí
No
No
Grabar programas de TV
Volver a utilizar borrando partes no deseadas
Editar las grabaciones
Editar/grabar de equipos conectados
Copiar discos para distribución
*1
Reproducir en otro equipo de DVD
*1
Detalles
Grabación
Puede grabar imágenes de tamaño 16:9
Sí
Sí
Sí
Puede grabar un programa de Copia-una-vez
Sí
No
No
Edición
*1
100
Puede hacer funciones de edición básica
Sí
Sí
Sí
Puede hacer funciones de edición avanzadas (edición de lista a reproducir)
Sí
No
No
El DVD-RW (modo VR) sólo puede reproducirse
en equipos de DV compatibles con VR.
Nota:
Para más detalles sobre las funciones anteriores y las
limitaciones implícitas, lea las explicaciones en este manual.
Español
Paso 3: Seleccione la
velocidad de
grabación
CH
REC
MONITOR
OPEN/CLOSE
DISPLAY
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TIMER
PROG.
.@/:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
TUV
8
WXYZ
9
SPACE
0
CM SKIP
CH
REC
MONITOR
PQRS
7
REC MODE CLEAR
POWER
OPEN/CLOSE
DISPLAY
TUV
8
WXYZ
9
SPACE
0
CM SKIP
CH
REC
MONITOR
TIMER
PROG.
.@/:
1
ABC
2
OPEN/CLOSE
A
REC
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
SPACE
0
CM SKIP
REC MODE CLEAR
REC
REC
DISPLAY
A
A
PAUSE
Getting started
REC MODE CLEAR
POWER
Paso 5: Grabe en
discos
DVD
Connections
POWER
Paso 4: Seleccione
el canal
deseado
SKIP
F
H
G
CH 1
SP 2:01 Rem.
Recording
I
Sugerencia 1: Reproduzca el contenido grabado
¿Qué son títulos y capítulos?
Inicio de grab.
Parada/inicio
Título 1
Parada grab.
Título 2
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2
Paso 6: Pare la
grabación
El contenido de un disco DVD se divide
generalmente en títulos. Los títulos pueden dividirse a su vez en capítulos.
7
REC MODE CLEAR
Sugerencia 2: Edite el disco grabado
Puede editar lo siguiente de la lista de títulos.
PAUSE
SKIP
F
H
G
B
PLAY
REV
FWD
h
g
STOP
C
SETUP
TOP MENU
K
MENU/LIST
Changing the SETUP menu
• Poniendo nombres en títulos
• Seleccionando imágenes para índices (modo VR)
• Seleccionando/borrando marcadores de capítulos
• Borrado de partes de títulos o escenas (modo VR)
9
CM SKIP
Editing
La edición de discos es fácil. Esta unidad ofrece convenientes funciones de
edición que sólo son posibles con discos DVD-R/RW.
REC
8
SPACE
0
Title Delete: Esto borra permanentemente una escena completa del disco.
Scene Delete: Esto permite que el usuario edite dentro de una escena específica (anuncios comerciales, por ejemplo).
Original y Playlist (modo VR)
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones
originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.
Playing discs
Puede seleccionar el título que desea reproducir de
un menú indicado y empiece a reproducir inmediatamente. El contenido grabado se puede acceder
fácilmente con un simple procedimiento de elegir
un título en un capítulo en la pantalla del menú.
Before you start
Fácil grabación de DVD (cont.)
58%
Escrit de datos
¿Qué significa "Original" o "Playlist"?
Others
A lo largo de este manual encontrará Original y Playlist que se refieren a las
grabaciones reales y la versión editada.
• La grabación Original se refiere a la grabación real en el disco.
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la versión Original.
Finalización de un disco
Esta operación puede
demorar en completarse.
Español
• Esto permitirá que un disco que se grabe en nuestra unidad pueda ser reproducido en un
reproductor DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.
• Después de finalizar un disco, si la grabación se hizo en el modo de vídeo, usted
no podrá editar ninguna información que se encuentre en ese disco.
• Si ha grabado en el modo VR en un disco DVD-RW, la edición podrá
realizarse incluso después de la finalización.
101
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. only)
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or
remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth
below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper
voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or
construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of
Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to
the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or
otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which
were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not
allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: DV-SR45U DVD Recorder
(Be sure to have this information available when you need service
for your Product.)
Warranty Period for this Product:
One (1) year parts and ninety (90) days labor from date of purchase.
Additional Item(s) Excluded from warranty
Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for
instructions on how to obtain service on your DVD recorder.
What to do to Obtain Service:
Ship your product, prepaid, as per the instruction given by the Sharp
representative at the toll free number (1-800-BE-SHARP). BE sure to
have your proof of purchase available. Be sure to ship the product
securely packaged and insured against shipping damage.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, GO TO OUR WEBSITE AT www.sharpusa.com
OR CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Osaka, Japan
9HS1VMN20185
E6515UD★★★★★
1VMN20185
Printed in China