20361_Lincoln Vantage 400 (Fact Sheet)

Add to my manuals
8 Pages

advertisement

20361_Lincoln Vantage 400 (Fact Sheet) | Manualzz

Vantage

®

400

Compact, Multi-Process, Excellent Value

The Vantage ® 400 is one of the most compact 400 amp engine-driven welder/ generators in the construction, pipe or rental fleet market today. It’s also one of the most quiet, with the smooth running 4-cylinder Perkins ® or Kubota diesel engines. Use this multi-process welder for arc gouging with up to 5/16" carbons, stick welding with up to 1/4" electrodes and CV wire welding with up to 3/32" wire.

You’ll value the superior arc performance delivered by Lincoln Chopper

Technology ® . You'll also appreciate VRD ™ (Voltage Reduction Device ™ ), which reduces OCV (open circuit voltage) in the CC-Stick weld mode for added safety.

This model efficiency generates 19,000 watts (peak) of 3-phase or 12,000 watts of 1-phase AC generator power for your lights, grinders and power tools. And, it's housed in a rugged, low maintenance stainless steel enclosure and loaded with many innovative service features. That all totals up to an excellent value!

Processes

Stick, TIG, MIG, Flux-Cored, Gouging

Advantage Lincoln

Compact Case

- One of the most compact 400 amp machines available. Suitable for many pickup and service trucks.

Stainless Steel Enclosure

- Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.

Multi-Process Welding, Separate Arc Gouge Mode

- Select one of five Process Modes, including CC-Stick (up to 1/4"),

Downhill Pipe (for stick), Touch-Start ® DC TIG, CV-Wire (up to

3/32") (1) or new Arc Gouging mode which maximizes output with up to 5/16" carbon rods.

VRD ™ Voltage Reduction Device ™

- Reduced OCV in the CC-Stick weld mode for added safety.

Plenty of AC Generator Power

- 19 kW peak (17 kW continuous) 3-Phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or inverter welder.

- 12 kW peak (11 kW continuous) 1-phase AC generator power for common construction tools.

®

• Sealed GFCI Modules

- GFCI (Ground Fault Circuit Interrupters) are sealed from moisture for more reliable operation.

• Reliable Engines

- 4 cylinder 1800 RPM Perkins ® and Kubota ® diesel engines run

smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.

20 gallon fuel tank for longer running time.

Low Noise

- 99.1 dBA Lwa sound power (74.8 dB at 23 ft./7 m) is one of the quietest 400 amp engine-driven welders available.

Innovative Service Access

- Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.

- Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.

- Patented tilt down control panel for easy servicing of internal components.

- Patented radiator cap cover is latched for easy access and is lockable.

(1) 3/32" E70T-6 up to 260 IPM, 27V.

Output

CC

CV

19

P kW

Input

D

Product

Name

Vantage ® 400

Rated Output

Current/Voltage/Duty Cycle

400A/36V/100%

450A/32V/100%

TECHNICAL SPECIFICATIONS

Output

Range

30-500A DC

40-300A Pipe

20-250A DC TIG

14-36V CV

90-450A Gouge

3-Phase AC Power:

19 kW Peak, 17 kW Continuous

1-Phase AC Power:

12 kW Peak, 11 kW Continuous

Engine

Model

Perkins ® 404D-22

Diesel

EPA Tier 4i

Kubota ®

V2403M

Diesel

EPA Tier 4i

No.

of

Cyl.

4

HP & Speed

(rpm)

32.7 @ 1800

Dimensions

H x W x D

Inches (mm)

35.9 x 25.3 x 60.0

(913 x 642 x 1524)

Net

Weight lbs (kg)

1230

(559)

35.5 @ 1800 1245

(565)

Publication E6.210

11/05

Web Update 11/08

www.lincolnelectric.com

A CLOSER LOOK

PERFORMANCE

Arc Performance

• 400 amps @100% duty cycle with output range up to 500 amps using Chopper Technology of 104°F/40°C.

® . All ratings are at temperatures

WHAT IS CHOPPER TECHNOLOGY ® ?

Traditional weld control is more variable around the desired output.

Chopper Technology ® delivers extremely fast response for smoother output control.

Patented and award-winning Lincoln Chopper Technology ® delivers superior DC arc welding performance for general purpose stick, Downhill

Pipe, DC TIG, MIG, cored-wire and arc gouging.

Benefits of Chopper Technology

- Easy arc starting

- Smooth arc action

- Low spatter levels

- Excellent bead appearance

® include:

• Arc Gouging with up to a 5/16" carbon.

gouging mode maximizes output.

WHAT IS VRD ™ ?

A separate arc

• VRD ™ (Voltage Reduction Device ™ ) reduced OCV (open circuit voltage) in CC-stick welding mode for added safety.

The VRD ™ (Voltage Reduction Device ™ ) provides additional safety in the

CC-Stick weld mode, especially when working in an environment with a higher risk of electrical shock such as wet areas and hot, humid sweaty conditions. The VRD ™ reduces the OCV (open circuit voltage) at the welding output terminals while not welding to less than 30 volts DC.

The VRD ™ is activated by flipping a toggle switch inside the machine to the

“ON” position. Indicator lights monitor the voltage: green for less than 30 volts while not welding, and either red (greater than 30 volts) or green while welding, depending on the actual voltage of the arc.

Other weld modes when VRD ™

Downhill Pipe

CV-Wire

Touch Start TIG ® is on:

There is no output.

OCV is not reduced.

No difference in operation. TIG is normally a low voltage (less than

30 volts) operation.

VRD ™ portion of nameplate with green light on.

• CC-Stick mode is optimized for general purpose stick using

E7018 low hydrogen electrode.

• Built-in “hot” start for easier starts and restrikes minimizing the electrode “sticking” to the work.

• Downhill pipe mode with active arc force control - enhanced downhill pipe welding mode. Excellent for cellulosic electrodes.

Fast travel speeds, especially on fill passes. Arc control adjustment for a soft, buttery arc or a more forceful digging arc.

• Standard Touch-Start DC TIG ® welding, not scratch start, for easy arc starting that avoids tungsten contamination and the use of high-frequency equipment.

WHAT IS TOUCH-START TIG ® ?

Touch-Start TIG ® uses a very low voltage to sense when the tip of the tungsten electrode is touched to the work piece. When this occurs, a complete circuit is established. When the tungsten is then raised from the work piece, the circuit senses a change in voltage and initiates the appropriate welding current and voltage to support the TIG welding process.

Enjoy the added benefits of Lincoln’s Touch-Start TIG ® when DC TIG welding. Not only do you avoid tungsten contamination when arc starting, but you also don’t need extra high frequency equipment.

• Excellent CV wire welding with cored-wire and MIG (CO2 and blended gas). 3/32" E70T-6 up to 260 IPM, 27V.

Generator Performance

• 3-Phase 240V AC generator power rated at 19 kW peak (17 kW continuous) output to power industrial equipment such as a plasma cutter, pump or inverter welder. Simultaneously weld and use 3-Phase AC power - for example, up to 9,400 watts can be delivered while welding at 300 amps. Compare to competitive product which has 3-Phase power available as an extra-cost factory-only option.

• 3-Phase 240V receptacle on control panel eliminates the need to hard-wire the connections.

• The Vantage ® 400 provides added value at the job site by delivering up to 12 kW peak (11 kW continuous) watts of 1-Phase AC auxiliary power for equipment such as a Lincoln plasma cutter.

Also use for lights, grinders and other common construction tools. And, you can simultaneously weld and have access to AC power – 4,700 watts can be delivered while welding at 300 amps.

• AC generator voltage is constant at 120V or 240V at any weld dial setting.

• Two 120V GFCI modules sealed from moisture for more reliable operation.

• All receptacles are circuit breaker protected.

Each receptacle has a spring-loaded weather protective cover which keeps each receptacle protected from the environment when not in use.

SIMULTANEOUS WELDING AND AUXILIARY POWER

Weld Amps

0

100

200

300

400

500

AND

Watts

1 Phase

Amps

11,000

11,000

8,000

4,700

1,700

0

46

46

33

20

7

0

OR

3 Phase

Watts Amps

17,000

15,400

13,000

9,400

3,400

0

41

37

31

23

8

0

OR

Simultaneous 1 and 3 Phase

Watts Amps

11,000

11,000

8.000

4,700

1,700

0

-

-

-

-

-

-

[2]

Vantage ® 400 www.lincolnelectric.com

A CLOSER LOOK

FEATURES

Single-side engine access with lockable sliding door.

Convenient slide-out battery drawer below control panel.

Fuel, Oil Pressure and Engine

Temperature gauges help you monitor performance.

Output automatically switches to remote mode when remote device is connected.

For the downhill pipe mode the machine output dial becomes a maximum current limit for more fine tuning with the remote control dial.

Patent-pending latched and lockable radiator cap cover.

Handy oil drain valve and tube makes oil changes easy.

• Simple Controls – Keeps training time to a minimum. The flip-down control panel door keeps less frequently used dials out of the way.

Scratch-resistant Lexan ® nameplate.

• Digital weld meters for amps and volts output make it easy to precisely set your procedures.

• Large 20 gallon (76 liter) fuel tank provides run time for an extended day—over 16 hours of welding at 400A/36V/100% duty cycle output, or 36 hours at high idle.

• Great Engine Choices – 32.7 horsepower water-cooled 4 cylinder

Perkins ® 404D-22 or 35.5 HP Kubota ® diesel engine. Each engine has an automatic idler for greater fuel economy and reduced noise, and a glow plug button for cold weather starting.

• Engine hour meter for scheduled maintenance.

• LN-25 PRO Across-the-Arc wire feeder is a recommended option.

• 14-pin connector for Lincoln wire feeders with control cables LF-72,

LF-74, LN-7, LN-8, LN-15, LN-23P, LN-25 and LN-742. Also compatible with Magnum ® SG Spool Gun System.

• Two Vantage ® 400 units can be paralleled in the CC-Stick Mode to increase output.

Key Controls

1 25 24

2

3

4

5

6

7

10

11

8

9

23

12

13

Note: Control panel door not shown.

[3]

17

16

15

14

22

21

20

19

18

1. Glow Plug Button

2. Weld Mode Selector Switch

3. Run/Stop Switch

4. Hour Meter

5. Start Pushbutton

6. Engine Idler Switch

7. Fuel Level, Engine Temperature and

Oil Pressure Gauges

8. Engine Protection Light

9. Engine Battery Charging Light

10. 120 VAC Circuit Breakers

11. 120 VAC Receptacles

12. Covered Weld Output Terminals + and -

13. Sealed GFCI Modules

14. Ground Stud

15. 120/240 VAC Full-KVA 1-Phase Receptacle

16. 240 VAC Full-KVA 3-Phase Receptacle

17. Full-KVA 1- & 3-Phase Circuit Breaker

18. 14-Pin Wire Feeder Connector

19. 6-Pin Remote Control Connector

20. Arc Force & Inductance/Pinch Control Dial

21. Welding Terminals Control Switch

22. Wire Feeder Voltmeter Polarity Switch

23. Digital Amps and Volts Output Meters

24. VRD Indicator Lights

25. Output Control Dial

Vantage ® 400 www.lincolnelectric.com

A CLOSER LOOK

QUALITY AND RELIABILITY

• Simple wire harnessing keeps connections to a minimum for greater reliability. Lead and harness strain reliefs on all control connections help ensure trouble-free performance.

• Engine Protection System includes automatic shutdown for low oil pressure or high engine temperature.

• Indicator light turns on for low oil pressure or high engine temperature. A second indicator light turns on if the engine battery charging system malfunctions.

• Circuit breaker protection on the battery ignition system provides added component protection.

• Environmental friendly engine! Engine has a closed breather system to keep the engine compartment and ground clean. This system eliminates oil mist from collecting inside the engine compartment, especially on surfaces that would lower engine cooling efficiency.

• Self-bleeding engine simplifies startup if your fuel tank runs dry.

• Perkins ® and Kubota maintenance.

® engine camshafts are gear-driven. No timing belt

• Printed circuit boards are environmentally-shielded using Lincoln’s engineered potting and protective frame trays.

• Dependability and long life aided by all-copper windings in rotor and stator with high quality insulation.

• Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance.

Eliminates the need to paint or replace rusting panels.

• Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

• CSA (Canadian Standards Association) Certified.

• Three-Year Lincoln Warranty on welder. (Engine is warranted separately by the manufacturer.)

MACHINE SPECIFICATIONS

Product

Name

Vantage ®

Perkins

Vantage ®

Kubota

400

®

400

®

Ordering

Information

K2410-3

K2711-1

Description

400 Amp DC Welder with

Engine Gauges

CC/Pipe-Rated DC Output (1) CV Rated Output (1)

Current/Voltage/Duty Cycle Current/Voltage/Duty Cycle

DC Constant Current

400A/36V/100%

450A/32V/100%

30-500A

DC Constant Voltage(2)

400A/36V/100%

450A/32V/100%

19,000 Watts Peak

17,000 Watts

Continuous AC Power

3-Phase

14-36V

Single Dial

Continuous Control

12,000 Watts Peak

11,000 Watts

Continuous AC Power

1-Phase

DC Pipe Current

300A/32V/100%

40-300A

Touch-Start TIG ® Range

250A/30V/100%

20-250A

Wire Feeder Power

120V/60Hz

42V/60Hz

Arc Gouge

400/36V/100%

90-450A

AC Power (3) (4)

19,000 Peak

Watts, 60 Hz

Two 120V Duplex

Receptacles w/

Sealed GFCI Modules

20A Per Duplex

40A Total (5)

1-Phase

Full KVA

Receptacle

46A@240V

46A@120V Each

Branch Circuit(5)

Single Dial

Continuous Control

60V DC Max OCV

@1880 RPM

3-Phase

Full KVA

Receptacle

41A@240V

Dimensions (6)

H x W x L inches (mm)

35.9 x 25.3 x 60.0

(913 x 642 x 1524)

Weight lbs. (kg)

1230

(559)

1245

(565)

(1) High Altitude: Perkins ® – for maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). Kubota ® – for maximum rating, derate the output 4% for every

1,000 ft. (300 m) above 4,900 ft. (1500 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C) above 104°F (40°C).

(2) DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.

(3) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.

(4) 120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.

(5) Circuits cannot be wired in parallel to operate the same device.

(6) Height is to top of case. Add 7.4 in. (187mm) to top of exhaust elbow.

Product

Name Description

ENGINE SPECIFICATIONS

Horsepower &

Displacement Capacities

Operating

Speeds

Fuel

Cunsumption

Perkins ® 404D-22 (7)

EPA Tier 4i

Kubota

V2403M (7)

EPA Tier 4i

®

4 Cylinder, 4 Cycle Water-Cooled Diesel Engine,

12V Electric Start, Dry Type Air Cleaner,

Fuel Filter with Water Separator,

Mechanical Governor

4 Cylinder, 4 Cycle Water-Cooled Diesel Engine,

12V Electric Start, Dry Type Air Cleaner,

Fuel Filter with Water Separator,

Electronic Governor

32.7 HP

@ 1800 RPM

136 cu. in.

(2.2 ltrs)

35.5 HP

@ 1800 RPM

149 cu. in.

(2.4 ltrs)

FUEL: 20 gals (76 ltrs)

OIL: 8.5 qts (8.0 ltrs)

RADIATOR COOLANT: 8.0 qts (7.6 ltrs)

FUEL: 20 gals (76 ltrs)

OIL: 10.0 qts (9.5 ltrs)

RADIATOR COOLANT: 8.0 qts (7.6 ltrs)

400A Load

1800 RPM

High Idle

1880 RPM

Low Idle

1400 RPM

400A Load

1800 RPM

High Idle

1800 RPM

Low Idle

1400 RPM

(7) Perkins ®

(8) Kubota ® warranty is 2 years/2,000 hours, all non-electric components, 3 years major non-electric components. See warranty for details.

engine warranty for U.S. and Canada is 2 years/2,000 hours, 3 years major components. Some limitations exist for Canada. See warranty statement for details.

1.2 Gal/Hr

4.4 Ltr/Hr

0.4 Gal/Hr

1.5 Ltr/Hr

0.3 Gal/Hr

1.1 Ltr/Hr

1.6 Gal/Hr

5.9 Ltr/Hr

0.6 Gal/Hr

2.3 Ltr/Hr

0.4 Gal/Hr

1.6 Ltr/Hr

[4]

Vantage ® 400 www.lincolnelectric.com

A CLOSER LOOK

SYSTEM SELECTION

One-Pak ® Welding Packages

Order a Lincoln One-Pak ® and get everything you need to complete a welding package - all with one order number.

(One-Pak ® Packages require assembly.)

Each UNASSEMBLED Package Contains:

• Vantage ® 400 (See Order Number Below)

• Medium Welder Trailer (K2636-1)

• Duo-Hitch ™ 2" Ball/Lunette Eye Hitch (included)

• Fender and Light Kit (K2639-1)

• Cable Rack (K2640-1)

• Cable Connectors - two (K2487-1)

• Electrode Cable 3/0, two 50 ft. (15.3 m) lengths (K2485-3)

• Electrode Cable 3/0, 10 ft. (3 m) (K2483-3)

• Work Cable 3/0, 50 ft. (15.3 m) (K2484-3)

• 400A Electrode Holder (K909-8)

• 500A Work Clamp (K910-2)

Order:

K2508-3 Vantage ® 400 Perkins ® One-Pak ® Package

K2717-3 Vantage ® 400 Kubota ® One-Pak ® Package

Vantage ® 400 K2636-1 Medium Welder Trailer

Duo-Hitch ™ 2" Ball/Lunette Eye Hitch

(included)

K2640-1 Cable Rack

Ready-Pak ® Welding Packages

Order a Lincoln Ready-Pak ® Package and get an assembled welding package.

Each COMPLETELY ASSEMBLED Package Contains:

• Vantage ® 400 (See Order Number Below)

• Medium Welder Trailer (K2636-1)

• Duo-Hitch ™ 2" Ball/Lunette Eye Hitch (included)

• Fender and Light Kit (K2639-1)

• Cable Rack (K2640-1)

• Cable Connectors - two (K2487-1)

• Electrode Cable 3/0, two 50 ft. (15.3 m) lengths (K2485-3)

• Electrode Cable 3/0, 10 ft. (3 m) (K2483-3)

• Work Cable 3/0, 50 ft. (15.3 m) (K2484-3)

• 400A Electrode Holder (K909-8)

• 500A Work Clamp (K910-2)

Order:

K2509-3 Vantage ® 400 Perkins ® Ready-Pak ® Package

K2718-3 Vantage ® 400 Kubota ® Ready-Pak ® Package

Completely Assembled Ready-Pak ® Pkg.

[5]

Vantage ® 400 www.lincolnelectric.com

RECOMMENDED OPTIONS

120V

120V

GENERAL OPTIONS

Power Plug Kit (20A)

Provides four 120V plugs rated at 20 amps each, and one dual voltage, full

KVA 1-phase plug rated at 120/ 240V,

50 amps. 120V plug may not be compatible with common household receptacles.

Order K802N

Power Plug Kit (15A)

Provides four 120V plugs rated at 15 amps each, and one dual voltage, full

KVA 1-phase plug rated at 120/ 240V,

50 amps. 120V plug is compatible with common household receptacles.

Order K802R

Full-KVA Power Plug (1-Phase)

One dual voltage plug rated at

120/240V, 50 amps. NEMA 14-50P.

Order T12153-9

Full-KVA Power Plug (3-Phase)

One plug rated at 240V, 50 amps.

NEMA 15-50P.

Order T12153-10

Medium Welder Trailer

For heavy-duty road, off-road, plant and yard use. Includes pivoting jack stand, safety chains, and 13" wheels.

Stiff .120" welded rectangular steel tube frame construction is phosphate etched and powder coat painted for superior rust and corrosion resistance.

Low sway suspension gives outstanding stability with manageable tongue weight. Wheel bearings are packed with high viscosity, high pressure, low washout Lubriplate ® grease. Includes a

Duo-Hitch ™ – a 2" Ball/Lunette Eye combination hitch. Overall width 60".

Order:

K2636-1 Trailer

K2639-1 Fender & Light Kit

K2640-1 Cable Rack

Four-Wheeled Steerable Yard Trailer

For off-road, plant and yard use.

Includes an automatically engaging drawbar lock when the drawbar is raised to the verticle position. 13" wheels. Wheel bearings are packed with high viscosity, high pressure, low washout Lubriplate ® grease. Stiff 3/16" welded rectangular steel frame construction is phosphate etched and powder-coat painted for superior rust and corrosion resistance. Also includes a Duo-Hitch ™ – a 2" Ball/ Lunette Eye combination hitch. Overall width: 55".

Order K2641-2

Spark Arrestor Kit

Mounts to Muffler Exhust Tube. Virtually eliminates spark emissions.

Order K903-1

[6]

Service Indicator Kit

Provides a GO/NO-GO visual indication of air cleaner element useful service life.

Filter service based on restriction readings allows the longest life possible from the filter and best engine protection.

Order K1858-1

Cold Weather Kit

For engine starting and operation in extreme cold weather conditions down to

-40°F(-40°C) (with the use of 0W40 synthetic oil and arctic diesel fuel). Includes

120V AC oil pan heater, 120V AC engine block heater, and radiator grill tarp.

Order K2679-1 for Perkins ®

Order K2735-1 for Kubota ®

Polarity/Multi-Process Switch

For easy polarity switching. Example: DCstick root pass on pipe & DC+ stick for hot, full and cap passes. Also for an easy process change. Example: DC+ stick root pass on pipe & DC- Innershield ® selfshielded flux-cored wirre for hot, fill and cap passes. 6 & 14-pin remote connections can be made to this unit. For all Lincoln

Chopper Technology ® engine-driven welders. Mounts on roof with K2663-1

Docking Kit.

Order K2642-1

Docking Kit

Secures the K2642-1 Polarity/Multi-Process

Switch to the engine-driven welder roof.

Release latch permits removal of K2642-1

Polarity/Multi-Process Switch. Made from stainless steel for rust-free operation. For all

Lincoln Chopper Technology ® engine-driven welders.

Order K2663-1

STICK OPTIONS

Accessory Kit

Includes 35 ft. (10.7 m) 2/0 electrode cable with lug, 30 ft. (9.1 m) 2/0 work cable with lugs, headshield, filter plate, cover plate, work clamp and electrode holder. 400 amp capacity.

Order K704

Remote Output Control

Consists of a control box with choice of two cable lengths. Permits remote adjustment of output.

Order K857 for 25 ft. (7.6 m)

K857-1 for 100 ft. (30.5 m)

Remote Output Control with 120V AC

Receptacles

Remote weld output control box with two

120V AC receptacles having GFCI (Ground

Fault Circuit Interrupter) protection. One cord for both remote and power. 100 ft.

(30.5 m) length. Permits remote adjustment of weld output and power for tools (such as a grinder) at the work. 20 amp capacity.

Order K2627-2

TIG OPTIONS

Pro-Torch ® PTA-26V TIG Torch

Air-cooled 200 amp torch (2 piece) equipped with valve for gas flow control.

25 ft. (7.6 m) length.

Order K1783-9

Vantage ® 400 www.lincolnelectric.com

RECOMMENDED OPTIONS

Magnum ® Parts Kit for PTA-26V

TIG Torch

Magnum ® Parts Kit provides all the torch accessories you need to start welding.

Parts kit provides collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable sack.

Order KP509

Foot Amptrol ®

Provides 25 ft. (7.6 m) of remote output control for TIG welding. (6-pin plug connection).

Order K870

Hand Amptrol ®

Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6-pin plug connection). Velcro straps secure torch.

Order K963-3

(one size fits all Pro-Torch ® TIG Torches)

Precision TIG ® 225 Ready-Pak ® Pkg.

For AC TIG Welding with square wave performance, use the AC generator of the engine-driven welder to supply the power (Full rated output may not be available). Easy setup. Includes torch,

Foot Amptrol ® and Gas Regulator &

Hose. Requires the K1816-1 Full KVA

Adapter Kit.

Order K2535-1

Invertec ® V205-T AC/DC One-Pak ®

Package

For AC TIG welding with square wave performance, use the AC generator of the engine-driven welder to supply the power. Easy setup. Includes torch, parts kit, regulator and hose kit, Twist-Mate ™ torch adapter, work cable with

Twist-Mate end and foot Amptrol ® .

Requires K1816-1 Full-KVA Adapter Kit.

Order K2350-2

Full - KVA Adapter Kit (1-Phase)

Provides convenient connection of

Lincoln Electric equipment having a

240V AC 1-phase plug (NEMA 6-50P) to the full-KVA receptacle on Lincoln engine-driven welders.

Order K1816-1

WIRE FEEDER OPTIONS

LN-25 PRO Wire Feeder

Portable CC/CV unit for flux-cored and

MIG welding with MAXTRAC ® wire drive system. Includes gas solenoid and internal contactor

Order K2613-1

Magnum ® 350 Innershield Gun

(for LN-25 PRO)

For self-shielded wire with 15 ft. (4.5 m) cable. For .062"-3/32" (1.6-2.4 mm) wire.

Order K126-2

Drive Roll and Guide Tube Kit

(for LN-25 PRO)

For cored or solid steel wire.

Order KP1697-068 for .068"-.072" (1.8 mm)

KP1697-5/64 for 5/64" (2.0 mm)

[7]

Magnum ® 300 MIG Gun

For .035"-.045" (0.9-1.2 mm) gasshielded wire with 15 ft. (4.5 m) cable.

LN-25 PRO Order:

K1802-1 (Includes Connector Kit)

Drive Roll and Guide Tube Kit

(for LN-25 PRO)

For .035" and .045" (0.9-1.1 mm) solid steel wire.

Order KP1696-1

LN-23P Wire Feeder

Portable CV unit for Innershield pipe welding. Includes drive rolls and guide tubes.

Requires K2393-1 or -2 Input Cable

Assembly and Magnum ® Innershield ®

Order K316L-2

Gun.

Input Cable Assembly for LN-23P

8-socket to 14-pin control cable with lugged electrode cable for K316L-2

LN-23P Wire Feeder.

Order:

K2393-1 25 ft (7.6 m)

K2393-2 75 ft (22.9 m)

Magnum ® 350 Innershield ® Gun

(for LN-23P)

Rated 350 amps, 60% duty cycle. For

.068"-5/64" (1.7-2.0 mm) Innershield ® and includes reduced speed switch.

Order K345-10 wire

Magnum ® SG Spool Gun

Hand held semiautomatic wire feeder.

Requires SG Control Module and Input

Cable.

Order K487-25

SG Control Module

The interface between the power source and the spool gun. Provides control of the wire speed and gas flow. For use with a spool gun.

Order K488

Input Cable

(For SG Control Module)

For Lincoln engine power sources with

14-pin MS-type connection, separate

115V NEMA receptacles and output stud connections.

Order K691-10

PLASMA CUTTING

Pro-Cut ® 55

Cuts metal using the AC generator power from the engine-driven welder. Accepts 3phase or 1-phase input power. Requires the K1816-1 Full KVA adapter kit, if connected for 1-phase input power.

Order K1580-1

Full-KVA Adapter Kit (1-Phase)

Provides convenient connection of Lincoln

Electric equipment having a 240V AC

1-phase plug (NEMA 6-50P) to the full-KVA receptacle on Lincoln engine-driven welders.

Order K1816-1

Vantage ® 400 www.lincolnelectric.com

PRODUCT DESCRIPTION

VANTAGE ® 400 PERKINS ®

VANTAGE ® 400 PERKINS ® ONE-PAK ® PKG.

VANTAGE ® 400 PERKINS ® READY-PAK ® PKG.

VANTAGE ® 400 KUBOTA ®

VANTAGE ® 400 KUBOTA ® ONE-PAK ® PKG.

VANTAGE ® 400 KUBOTA ® READY-PAK ® PKG.

RECOMMENDED GENERAL OPTIONS

Power Plug Kit - 20 amp

Power Plug Kit - 15 amp

Full-KVA Power Plug (1-Phase)

Full-KVA Power Plug (3-Phase)

Medium Welder Trailer with Duo-Hitch ™

- Fender and Light Kit

2" Ball/Lunette Eye Hitch

- Cable Rack

Four-Wheeled Steerable Yard Trailer

(with Duo-Hitch ™ : 2" Ball/Lunette Eye Hitch)

Spark Arrestor Kit

Service Indicator Kit

Cold Weather Kit (Perkins ® )

Cold Weather Kit (Kubota ® )

Polarity/Multi-Process Switch

Docking Kit

RECOMMENDED STICK OPTIONS

Accessory Kit

Remote Output Control

- 25 ft. (7.6m)

- 100 ft. (30.5m)

Remote Output Control w/120V AC Receptacles

RECOMMENDED TIG OPTIONS

Pro-Torch ® PTA-26V TIG Torch

Magnum ® Parts Kit For PTA-26V TIG Torch

Foot Amptrol ®

Hand Amptrol ® (All Pro-Torch ® TIG torches)

Precision TIG ®

Invertec ®

225 Ready-Pak ® Pkg. (for AC TIG Welding)

V205-T AC/DC One-Pak ® Pkg. (for AC TIG welding)

- Full KVA Adapter Kit (required for K2535-1 and K2350-2)

RECOMMENDED WIRE FEEDER OPTIONS

LN-25 PRO Wire Feeder

Magnum ® 350 Innershield ® Gun

Drive Roll and Guide Tube Kit .068"-.072" (for LN-25 PRO)

Drive Roll and Guide Tube Kit 5/64" (for LN-25 PRO)

Magnum ® 300 MIG Gun (for LN-25 PRO) (includes Connector Kit)

Drive Roll and Guide Tube Kit (for LN-25 PRO)

LN-23P Wire Feeder

- Input Cable Assembly, 25 ft. (7.6 m)

- Input Cable Assembly, 50 ft. (15.2 m)

Magnum ® 350 Innershield ® Welding Gun

Magnum ® SG Spool Gun ®

- SG Control Module (required)

- Input Cable (required)

RECOMMENDED PLASMA CUTTING OPTIONS

Pro-Cut ® 55

- Full KVA Adapter Kit (required for 1-phase input power)

VANTAGE

®

400 ORDER FORM

ORDER NUMBER

K2410-3

K2508-3

K2509-3

K2711-1

K2717-3

K2718-3

K802N

K802R

T12153-9

T12153-10

K2636-1

K2639-1

K2640-1

K2641-2

K903-1

K1858-1

K2679-1

K2735-1

K2642-1

K2663-1

K704

K857

K857-1

K2627-2

K1783-9

KP509

K870

K963-3

K2535-1

K2350-2

K1816-1

K2613-1

K126-2

KP1697-068

KP1697-5/64

K1802-1

KP1696-1

K316L-2

K2393-1

K2393-2

K345-10

K487-25

K488

K691-10

K1580-1

K1816-1

TOTAL:

QUANTITY PRICE

C U S T O M E R A S S I S T A N C E P O L I C Y

The business of The Lincoln Electric Company ® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

T H E L I N C O L N E L E C T R I C C O M PA N Y ®

22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement