PB238Q Series
LCD Monitor
User Guide
Table of contents
Notices.......................................................................................................... iii
Safety information....................................................................................... iv
Care & Cleaning............................................................................................ v
1.1Welcome!....................................................................................... 1-1
1.2
Package contents.......................................................................... 1-1
1.3
Monitor introduction..................................................................... 1-2
1.3.1
Front of the LCD monitor................................................. 1-2
1.3.2
Rear of the LCD monitor.................................................. 1-4
1.3.3
QuickFit Function............................................................. 1-5
2.1Detaching the arm/stand
(for VESA wall mount).................................................................. 2-1
2.2
Adjusting the monitor................................................................... 2-2
2.3
Connecting the cables.................................................................. 2-3
3.1
OSD (On-Screen Display) menu.................................................. 3-1
3.1.1
How to reconfigure........................................................... 3-1
3.1.2
OSD Function Introduction............................................... 3-2
3.2
Specifications................................................................................ 3-7
3.3
Troubleshooting (FAQ)................................................................. 3-8
3.4
Supported Timing List.........................................................................3-9
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, in case use at a PC then it should
use the monitor only with computers which have appropriate
configured receptacles marked between 100-240V AC.
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
• The wall socket shall be installed near the equipment and shall be
easily accessible.
iv
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LED. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vi
1.1Welcome!
Thank you for purchasing the ASUS® PB238Q Series LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the PB238Q Series brings you!
1.2
Package contents
Check your PB238Q Series LCD monitor package for the following items:
LCD monitor
Power Cord
VGA Cable
DVI Cable
DisplayPort Cable
USB Cable
Cable Tie
Audio Cable
Quick Start Guide
Warranty Card
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor PB238Q Series
1-1
1.3
Monitor introduction
1.3.1
Front of the LCD monitor
7
6
5
4
3

2
1
1.
Power Button/Power Indicator:
•
Press this button to turn the monitor on/off.
•
The color definition of the power indicator is shown below.
2.
Status
Description
White
ON
Amber
Standby mode
OFF
OFF
Input Select Button:
•
Press this button to select input source.
Press
button (Input Select button) to display HDMI/DisplayPort signals after
you connect HDMI/DisplayPort cable with the monitor.
3.
1-2
Button:
•
Press this button to decrease values or to move your selection
left/down.
•
This is also a hot key for Volume adjustment.
Chapter 1: Product Introduction
4.
MENU Button:
•
Press this button to turn on the OSD menu, or to enact the
selected OSD menu item.
•
Press this button to exit the hotkey OSD menu.
•
Press this button to increase values or to move your selection
right/up.
•
Brightness hotkey
5.
Button:
6.
Button:
•
Press this button to select a desired preset mode.
•
Press this button to exit the OSD menu or to go back to the
previous menu when the OSD menu is active.
•
Press this button for 2 ~ 4 seconds to automatically adjust the
image to its optimized position, clock, and phase (for VGA mode
only).
7.
QuickFit button:
•
Press this button to activate the QuickFit function designed for
alignment.
•
The QuickFit function contains 7 pages of common grid patterns, paper sizes, and photo sizes. (Please refer to 1.3.3 QuickFit
Function)
ASUS LCD Monitor PB238Q Series
1-3
1.3.2
1
Rear of the LCD monitor
2
3
4
5
6
7
8
9
10
11
Rear connectors
1-4
1.
AC-IN port: This port connects the power cord.
2.
Power switch: Press this switch to turn on/off power.
3.
DisplayPort. This port is for connection with a DisplayPort compatible
device.
4.
HDMI port: This port is for connection with an HDMI compatible
device.
5.
DVI port: This 24-pin port is for PC (Personal Computer) DVI-D digital
signal connection.
6.
VGA port: This 15-pin port is for PC VGA connection.
7.
Audio Line-in Port:
8.
USB upstream port: This port is for connection with a USB upstream
cable.
9.
USB downstream ports: These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
Chapter 1: Product Introduction
10. Kensington lock slot.
11. USB downstream ports: These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
1.3.3
QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo
size.
1.
Grid patterns
The grid patterns facilitate designers and users to organize content and layout on a
page and achieve a consistent look and feel.
Alignment Grid
QuiFit - Alignment Grid

Alignment Grid
2.
Paper size
QuickFit provides numerous commonly used standard paper sizes for users to
view their documents in real size on the screen.
Letter
QuiFit - Letter



Letter
ASUS LCD Monitor PB238Q Series
1-5
3.
Photo size
The various real photo sizes displayed in the QuickFit function provides
photographers and other users to accurately view and edit their photos in real size
on the screen.
Photo 4x6, 3x5, 2x2
QuiFit - 4x6, 3x5, 2x2
4x6
1-6

3x5
Photo 8x10, 5x7

2x2

QuiFit - 8x10, 5x7

8x10


5x7
Chapter 1: Product Introduction
2.1Detaching the arm/stand
(for VESA wall mount)
The detachable stand of this monitor is specially designed for VESA wall mount.
To detach the arm/stand:
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use a screwdriver to remove the four screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
•
e recommend that you cover the table surface with soft cloth to prevent
W
damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
Figure 1
Figure 2
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7
kg (Screw size: 4 x 10 mm).
ASUS LCD Monitor PB238Q Series
2-1
2.2
Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling when you change its
angle.
• You can adjust the monitor’s angle from +20˚ to -5˚ and it allows 60˚
swivel adjustment from either left or right. You can also adjust the
monitor’s height within +/- 10cm.
-5° ~ +20°
60°
60°

10cm

0°
Pivoting the monitor
1.
Lift the monitor to the highest position.
2.
Tilt the monitor to its maximum angle.
3.
Pivot the monitor clockwise to the angle you need.

-5° ~ +20°
2

1
3


It is normal that the monitor slightly shakes while you adjust the viewing angle.
2-2
Chapter 3: General Instruction
2.3
Connecting the cables
Connect the cables as the following instructions:
• To connect the power cord: Connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
• To connect the VGA/HDMI/DVI/DisplayPort cable:
a. Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s VGA/
HDMI/DVI/DisplayPort jack.
b. Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your
computer’s VGA/HDMI/DVI/DisplayPort jack.
c. Tighten the two screws to secure the VGA/DVI connector.
• To connect the audio cable: Plug one end of the audio cable to the
monitor’s Audio Line-in Port. Connect the other end of the audio cable to your
computer’s audio Port.
• To use the USB ports: Plug the smaller end (type B) of the USB
upstream cable to the monitor’s USB upstream port, and the larger end
(type A) to your computer’s USB port.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
ASUS LCD Monitor PB238Q Series
2-3
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
PB238
Splendid
Scenery Mode
Color
Standard Mode
Image
Theater Mode
Sound
Game Mode
Input Select
Night View Mode
System Setup
sRGB
Move
3-1
Menu
Exit
1.
Press the MENU button to activate the OSD menu.
2.
Press  and  to navigate through the functions. Highlight and activate
the desired function by pressing the MENU button. If the function selected
has a sub-menu, press  and  again to navigate through the sub-menu
functions. Highlight and activate the desired sub-menu function by pressing
the MENU button.
3.
Press  and  to change the settings of the selected function.
4.
To exit the OSD menu, press the
adjust any other function.
button. Repeat step 2 and step 3 to
Chapter 3: General Instruction
3.1.2
1.
OSD Function Introduction
Splendid
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to maintain
your setting or return to the preset mode.
PB238
Splendid
Scenery Mode
Color
Standard Mode
Image
Theater Mode
Sound
Game Mode
Input Select
Night View Mode
System Setup
sRGB
Move
Menu
Exit
•
Scenery Mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Intelligence.
•
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence.
•
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence.
•
Game Mode: This is the best choice for game playing with
SPLENDID™ Video Intelligence.
•
Night View Mode: This is the best choice for playing dark-scene
game or watching movie with SPLENDID™ Video Intelligence.
•
sRGB: This is the best choice for viewing photos and graphics
from PCs.
•
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
•
In the sRGB, the Saturation, Color Temp., Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
ASUS LCD Monitor PB238Q Series
3-2
2.Color
Select the image color you like from this function.
PB238
Splendid
Brightness
Color
Contrast
100
80
Image
Saturation
50
Sound
Color Temp.
Input Select
Skin Tone
User Mode
Natural
System Setup
Move
Menu
Exit
•
Brightness: The adjusting range is from 0 to 100. The
button is also a hot key to activate this function.
•
Contrast: The adjusting range is from 0 to 100.
•
•
Saturation: The adjusting range is from 0 to 100.
Color Temp.: Contain three preset color modes (Cool, Normal,
Warm) and one User Mode.
•
Skin Tone: Contain three color modes including Reddish, Natural,
and Yellowish.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
3-3
Chapter 3: General Instruction
3.Image
You can adjust the image Sharpness, Trace Free, Aspect Control, Position
(VGA only), and Focus (VGA only) from this main function.
PB238
Splendid
Sharpness
Color
Trace Free
Image
Aspect Control
Full
OFF
Sound
ASCR
Input Select
Position
System Setup
Focus
Move
Menu
50
60
Exit
•
Sharpness: Adjust the picture sharpness. The adjusting range is
from 0 to 100.
•
Trace Free: Speed up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
•
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over
Scan” (only available for HDMI input).
•
ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
•
Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
•
Focus: Reduce Horizontal-line noise and Vertical-line noise of the
image by adjusting (Phase) and (Clock) separately. The adjusting
range is from 0 to 100 (only available for VGA input).
ASUS LCD Monitor PB238Q Series
3-4
4.Sound
Adjust the sound settings to your preference.
PB238
Splendid
Volume
Color
Mute
Image
Source
50
OFF
Line In
Sound
Input Select
System Setup
Move
5.
Menu
Exit
•
Volume: Adjust the output volume level.
•
Mute: Mute the output volume.
•
Source: Adjust audio source to “Line In” or “HDMI” (only available
for HDMI input);
Adjust audio source to “Line In” or “DisplayPort” (only available for
DisplayPort input).
Input Select
Select the input source from VGA, DVI, HDMI, or DisplayPort.
PB238
Splendid
VGA
Color
DVI
Image
HDMI
Sound
DisplayPort
Input Select
System Setup
Move
3-5
Menu
Exit
Chapter 3: General Instruction
6.
System Setup
Adjusts the system configuration.
PB238
Splendid
Splendid Demo Mode
Color
OSD Setup
Image
Language
Sound
Information
Input Select
All Reset
OFF
English
System Setup
Move
Menu
Exit
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
•
OSD Setup: Adjust the horizontal position (H-Position), vertical
position (V-Position), OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
•
Language: Select OSD language. The selections are English,
French, German, Spanish, Italian, Dutch, Russian, Traditional
Chinese, Simplified Chinese, and Japanese.
•
Information: Display the monitor information.
•
All Reset: Set to “Yes” to revert all settings to the factory default
mode.
ASUS LCD Monitor PB238Q Series
3-6
3.2
Specifications
Model
PB238Q
Panel Size
23.0”W (58.42cm)
Max. Resolution
1920x1080
Brightness (Typ.)
250cd/m2
Intrinsic Contrast Ratio (Typ.)
Viewing Angle (CR=10)
1000:1
178°(V) /178°(H)
Display Colors
16.7 M(6bit Hi FRC)
Response Time
6ms (Gray to Gray)
Satellite Speaker
2W x 2 stereo
Earphone Output
No
Sound from HDMI
Yes
HDMI input
Yes
DVI input
DVI with HDCP
D-Sub input
Yes
DisplayPort input
Yes
Audio Line-in
Yes
Power ON Consumption
Tilt
VESA Wall Mounting
<50W
-5° ~ +20°
Yes (100mm x 100mm)
Phys. Dimension (WxHxD)
549x396x201mm
Box Dimension (WxHxD)
671x253x386mm
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
6.2kg
9.1kg
AC 100~240V(Built-in)
*Specifications are subject to change without notice.
3-7
Chapter 3: General Instruction
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
• Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights amber and • Check if the monitor and the computer are in the
there is no screen image
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or • Press the
button for two seconds to
sized properly
automatically adjust the image.
• Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave • Make sure the signal cable is properly connected to
pattern is present in the image
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects • Inspect the signal cable and make sure that none of
(white does not look white)
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
• Press the
button for two seconds to
automatically adjust the image (for VGA mode only).
• Adjust the Phase and Clock settings via OSD.
No sound or sound is low
ASUS LCD Monitor PB238Q Series
• Ensure that the audio cable is properly connected to
the monitor and the computer.
• Adjust the volume settings of both your monitor and
computer.
• Ensure that the computer sound card driver is
properly installed and activated.
3-8
3.4
Supported Timing List
PC Supported Primary Timing
Resolution
Refresh Rate
Horizontal Frequency
640x480
60Hz
31.469kHz
640x480
72Hz
37.861kHz
640x480
75Hz
37.5kHz
800x600
56Hz
35.156kHz
800x600
60Hz
37.879kHz
800x600
72Hz
48.077kHz
800x600
75Hz
46.875kHz
1024x768
60Hz
48.363kHz
1024x768
70Hz
56.476kHz
1024x768
75Hz
60.023kHz
1152x864
75Hz
67.5kHz
1280x960
60Hz
60kHz
1280x1024
60Hz
63.981kHz
1280x1024
1440x900
1440x900
1680x1050
1920x1080
75Hz
60Hz
75Hz
60Hz
60Hz
79.976kHz
55.935kHz
70.635kHz
65.29kHz
67.5kHz
IBM Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Resolution
Refresh Rate
Horizontal Frequency
640x350
70Hz
31.469kHz
720x400
70Hz
31.469kHz
MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Resolution
Refresh Rate
Horizontal Frequency
640x480
832x624
67Hz
75Hz
VESA Modes, User Available Timing
Resolution
Refresh Rate
1280x720(RB)
1280x720
1280x720
1280x768(RB)
1280x800(RB)
1280x800
1280x800
1440x900(RB)
1440x900
1680x1050(RB)
1920x1080
3-9
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
75Hz
60Hz
75Hz
60Hz
60Hz
35kHz
49.725kHz
Horizontal Frequency
44.444kHz
44.772kHz
56.456kHz
47.396kHz
49.306kHz
49.702kHz
62.795kHz
55.469kHz
70.635kHz
64.674kHz
66.587kHz
Chapter 3: General Instruction
HDMI Supported Primary Timing
VESA Modes, Factory Preset Timing
Resolution
Refresh Rate
640x480P
720x480P
720x480P
720x576P, 50Hz
720x576P, 50Hz
1280x720P, 50Hz
1280x720P
1920x1080i
1920x1080i
59.94 / 60Hz
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
50Hz
59.94 / 60Hz
50Hz
59.94 / 60Hz
HDMI Supported Optional Timing
Resolution
Refresh Rate
1440x480P
1440x480P
1440x576P
1440x576P
1920x1080P
1920x1080P
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
50Hz
59.94 /60Hz
Horizontal Frequency
31.469 / 31.5kHz
31.469 / 31.5kHz
31.469 / 31.5kHz
31.25kHz
31.25kHz
37.5kHz
44.955 /45kHz
28.125kHz
33.716 / 33.75kHz
Horizontal Frequency
31.469 / 31.5kHz
31.469 / 31.5kHz
31.25kHz
31.25kHz
56.25kHz
67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor PB238Q Series
3-10