Emerson LC260EM2 Owner`s manual

EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., MOONACHIE, NEW JERSEY, U.S.A.
26” LCD TV
LC260EM2
English
EN Owner's Manual
ES Manual del Propietario
FR Manuel du Propriétaire
Español
ES ¿Necesita ayuda?
Llame por favor sin costo ó visite nuestro sitio web en
FR Besoin d’aide?
Appelez notre numéro gratuit ou visitez notre site web à l’adresse

1 866 309 8819
www.emersonaudiovideo.com

Français
EN Need help?
Please call toll free or visit our web site below
2
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the apparatus’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
The caution marking is located on the rear or bottom of the cabinet.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Wall Mount Bracket Kit
Recommended Wall Mount Bracket Kit:
Brand: SYLVANIA
Model #: SYL-MA3210B
Recommended Screw dimension :
M4 x 0.472” (12mm)
• The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to
the Wall Mount Instruction Book.
• Funai is not responsible for any damage to the product or injury
to yourself or others if you elect to install the TV Wall Mount
Bracket or mount the TV onto the Bracket on your own.
• The Wall Mount Bracket must be installed by experts.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart / apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Funai not liable for these types of accidents or
injury noted below.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force; this may damage
the product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or turned on. It may result in an electrical
shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8 inches (30cm)
Left and right side:
5.9 inches (15cm)
Bottom:
3.9 inches (10cm)
English
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
Trade Name: Emerson 
Model: LC260EM2 A
Responsible Party: FUNAI CORPORATION, Inc.
Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
Telephone Number: 1-866-309-8819
This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7
CAUTION: D
anger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
Never use a gas duster on this TV. The gas trapped inside of this unit may cause ignition and explosion.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
WARNING:To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the
instructions. Tipping, shaking or rocking the unit may cause injury / death.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing
on it. A falling unit can cause serious injury or even death.
LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDINGTO LOCAL, STATE OR FEDERAL LAW.
•• The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
NOTE ABOUT RECYCLING
•• This unit’s packaging materials are recyclable and can be
reused. Please dispose of any materials in accordance
with your local recycling regulations.
•• Batteries should never be thrown away or incinerated
but disposed of in accordance with your local
regulations concerning chemical wastes.
•• For product recycling information, please visit www.emersonaudiovideo.com
Trademark Information
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
WHEN CARRYING THIS UNIT
•• At least 2 people are required when
carrying this unit.
•• Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
•• Do not handle the AC power cord with wet hands.
•• Do not pull on the AC power cord when disconnecting it from an
AC outlet. Grasp it by the plug.
•• Do not put your fingers or objects into the unit.
LOCATION AND HANDLING
•• Do not install the unit in direct sunlight or in a place subject to dust
or strong vibration.
•• Avoid a place with drastic temperature changes.
•• Install the unit in a horizontal and stable position. Do not place anything
directly on top or bottom of the unit. Depending on your external
devices, noise or disturbance of the picture and / or sound may be
generated if the unit is placed too close to them. In this case, please
ensure enough space between the external devices and the unit.
•• Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
•• Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
3
4
Child Safety
English
Features
• DTV / TV / CATV
You can use your remote control to select channels which are
broadcast in digital format and conventional analog format. Also,
cable subscribers can access their cable TV channels.
Contents
INTRODUCTION
PREPARATION
WATCHING TV
USING FUNCTIONS
CONNECTING DEVICES
External Device Connection
FAQ
Troubleshooting Guide
INFORMATION
Glossary
Maintenance
General Specifications
Electrical Specification
Other Specifications
Limited Warranty
25
28
28
30
30
31
31
31
32
• Child Lock
This feature allows you to block children’s access to inappropriate
programs.
• Closed Caption Decoder
Built-in closed caption decoder displays text for closed caption
supported programs.
• MTS / SAP Tuner
Audio can be selected from the remote control.
• Auto Standby
If there is no input signal and no operation for 15 minutes, the
unit will go into standby mode automatically.
• Sleep Timer
You can set the unit to go into standby mode after a specific
amount of time.
• Choices for On-screen Language
Select your on-screen language:
English, Spanish or French.
• Stereo Sound Function
• PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune
directly to any channel using the number and decimal point “•”
buttons on the remote control.
• Various Adjustment for Picture and Sound
Customizes image quality suitable for your room and sets your
sound preference.
• fun-Link via HDMI Link
(HDMI Cable not Included)
fun-Link allows your other HDMI link devices to be controlled by
the HDMI cable connected to your TV.
• HDMI Input
• HDMI-DVI Input
•
•
•
•
If your video device has DVI output jack, use an HDMI-DVI
conversion cable to connect the unit.
Component Video Input
PC Input
AV Input
USB Terminal
The picture (JPEG) and video (Motion JPEG) files stored on a
USB storage device can be played back on this unit.
• Digital Audio Output
© 2012 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage
medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of
this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify
any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written consent
of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be
construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or
any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
INFORMATION
USEFUL TIPS
16
16
17
18
23
24
This unit automatically scans and memorizes channels available in
your area, eliminating difficult setup procedures.
USEFUL TIPS
Picture
Sound
Setup
Features
Language
USB
12
12
12
13
13
13
14
14
• Autoprogram
CONNECTING DEVICES
Switching Each Input Mode
Sleep Timer
Sound Functions
Freeze Mode
TV Screen Display Mode
Channel Selection
TV Screen Information
ECO
10
10
10
11
You can display the title, contents and other information of the
current DTV program on the TV screen.
USING FUNCTIONS
Antenna Connection
Connection to Cable Receiver or Satellite Box
Plug In the AC Power Cord
Initial Setup
5
6
6
6
6
7
7
8
9
• Information Display (ATSC only)
WATCHING TV
Features
Supplied Accessories
Symbols Used in this Manual
Attaching the Base
Mounting the Unit on Your Furniture
Remote Control Function
Installing the Batteries
Control Panel
Terminals
2
3
4
PREPARATION
Important Safety Instructions
Trademark Information
Child Safety
INTRODUCTION
INTRODUCTION
5
6
Supplied Accessories
Owner’s Manual
Quick Start Guide
Attaching the Base
Registration card
Quick
Start
IMPORTANT
Remote Control and TV base and 4 screws (M4 x 20)
batteries
(AAA, 1.5V x 2)
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction. At least 2 people are required for these steps.
1
2
Check the text “FRONT” with “arrow“ on the Base’s
bottom to ensure it is being installed in the correct
direction. Spread a thick and soft cloth over a table as shown
at step 2. Place the main unit face down onto it. Make sure
not to damage the screen.
Insert 2 hooks under
the bottom of the main
➁
unit into base holes
(shown by arrow ➀),
then move the base in
the direction as shown
➀
by arrow ➁ until it
stops and the screw
holes are aligned.
Make sure not to put the AC power cord between the
base and the unit.
FRONT
AAA
AAA
Note
•• If you lose the screws, please purchase (M4 x 20) Phillips head
screws at your local store.
•• If you need to replace these accessories, please refer to the part
name or No. with the illustrations and call our toll free customer
support line found on the cover of this manual.
When using a universal remote control to operate this unit.
•• Make sure the component code on your universal remote control
is set to our brand. Refer to the manual accompanying your
remote control for more details.
•• We do not guarantee 100% interoperability with all universal
remote controls.
3
Drive Phillips head
screws into the 4
threaded holes at the
bottom of the base until
they are tight.
To remove the base from this unit
•• Unscrew the Phillips head screws in step 3.
After the screws are removed, pull the base up toward the rear of
the unit. Be careful not to drop the base when you remove it.
Note
Symbols Used in this Manual
The following is the description for the symbols used in this
manual. Description refers to:
ATSC
: Digital TV operation
NTSC
: Analog / Cable TV operation
• If neither symbol appears, the operation is applicable to
both.
•• When attaching the base, ensure that all screws are tightly
fastened. If the base is not properly attached, it could cause the
unit to fall, resulting in injuries as well as damage to the unit.
•• Make sure to use a table which can support the weight of this unit
and is larger than this unit.
•• Make sure the table is in a stable location.
•• When attaching the base, ensure that “FRONT” with “arrow”
written on the bottom of the base is downward. If it’s not
downward, the 2 hooks don’t fit into the base.
Mounting the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
•• Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
rear of this unit
screw holes
Note
•• When you remove this unit make sure to unscrew the wood
screws from your Wood Stand, Furniture and other wood item.
English
1
2
11
SOURCE
SLEEP
FREEZE
ECO
14
3
4
OK
MENU
INFO
15
16
SAP
VOL
MUTE
CH
10 PREV CH ➠ p. 13
2
3
4
5
6
7
8
9
PREV CH
0
.
11 (power) ➠ p. 11
Press to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC
power cord.
12 FORMAT
➠ p. 13
Press to select aspect ratio available for the TV screen.
13 FREEZE ➠ p. 13
Press to freeze screen image.
14 ECO
➠ p. 14
Press to reduce power consumption.
15 INFO ➠ p. 14
16 SAP ➠ p. 12
17 CH ▲/▼ ➠ p. 13
Install the batteries (AAA, 1.5V x 2) matching the polarity
indicated inside battery compartment of the remote control.
USEFUL TIPS
Installing the Batteries
CONNECTING DEVICES
1
USING FUNCTIONS
10
Press to shift the subchannel from the main channel.
Press to return to previously viewed channel.
8
9
17
p. 12
p. 12
p. 14
p. 11
p. 15
p. 11
p. 12
p. 12
p. 13
WATCHING TV
5
6
7
12
13
➠
➠
➠
➠
➠
➠
➠
➠
➠
PREPARATION
BACK
FORMAT
1 SOURCE
2 SLEEP
3 BACK
4 ▲/▼/◄/►(cursor)
5 MENU
6 OK
7 VOL / 8 MUTE 9 Number buttons
• (dot)
INTRODUCTION
Remote Control Function
7
INFORMATION
Battery Precautions:
•• Be sure to follow the correct polarity as indicated in the battery
compartment. Reversed batteries may cause damage to the
device.
•• Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones.
•• If the device is not to be used for a long period of time, remove
the batteries to prevent damage or injury from possible battery
leakage.
•• Do not try to recharge batteries; they can overheat and rupture.
8
Control Panel
1 VOL
/
➠
p. 12
➠
➠
p. 15
p. 13
Press to adjust the volume up ( ) / down ( ) or to move
left ( ) / right ( ) when selecting menu items.
2 MENU
3 CH ▲/▼ Press to select channels or to move up (▲) / down (▼)
when selecting menu items.
4 (POWER-ON / STANDBY-ON) 
➠ p. 11
*
5
6
7
− VOLUME +
1
MENU
2
− CHANNEL +
3
POWER
4
Press to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC
power cord.
5 S tandby indicator
Lights up red when the unit is in Standby mode.
6 Power On indicator
Flashes while the unit is Turning On and lights up green
when power is On.
7 Infrared sensor
Receives IR signals from remote control.
This indicator does not function on this unit.
English
8
10
13
14
16
➠
p. 10, 25
10 Component / Composite (VIDEO) Video Input jacks
for VIDEO ➠ p. 26
Composite Video Input jack (VIDEO) is shared jack with
Component Video Input (Y) jack.
11 Analog Audio (L/R) Input jacks
➠ p. 10, 25, 26, 27
Connect Analog Audio signals from
Component Video / Analog Audio (L/R) jacks signal or
HDMI-DVI / Analog Audio (L/R) jacks signal or
Composite Video / Analog Audio (L/R) jacks signal or
PC Connection / Analog Audio (L/R) jacks signal with
stereo mini plug conversion cable jack on PC.
Analog Audio (L/R) Input jacks are right below the
Component Video Input jacks. When the Audio is
monaural, then only connect to the Audio L Input jack.
12 Antenna Input jack ➠ p. 10
Rear Panel
13 AC power cord ➠ p. 10
Note for USB terminal
USEFUL TIPS
•• User should not connect any devices to the USB terminal such as
digital camera, keyboard, mouse, etc. (because these will not work).
•• The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked
to do the software update themselves.
CONNECTING DEVICES
14 HDMI 1 (HDMI-DVI) Input jack
➠ p. 10, 25
15 Digital Audio Output jack ➠ p. 26
16 PC (VGA) Input jack ➠ p. 27
USING FUNCTIONS
15
12
9 HDMI 2 Input jack
WATCHING TV
11
p. 27
PREPARATION
9
➠
Use this terminal only to play back the picture (JPEG) and
video (Motion JPEG) files stored on a USB storage device,
or when software update is needed.
INTRODUCTION
Side Panel
8 USB Terminal
Terminals
9
INFORMATION
10
PREPARATION
Connection to Cable Receiver or
Satellite Box
No supplied cables are used with these connections:
•• Please purchase the necessary cables at your local store.
Before you connect:
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
Use an HDMI or Component Video cables to connect the
HDMI or the Component Video Input jacks of the unit to the
HDMI or the Component Video output jacks of the cable
receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks right below the Component Video connector jacks.
satellite dish
cable TV signal
including PPV
Antenna Connection
or
Connect the RF coaxial cable on your home outlet to the
antenna input jack of this unit.
RF coaxial cable
or
VHF / UHF
analog
or
DTV antenna
HDMI cable
component video cables
(red / blue / green) and
audio cables
(green) (blue) (red)
AUDIO OUT
L
R
or
COMPONENT VIDEO OUT
Y
Pb/Cb
Pr/Cr
HDMI OUT
or
ANT IN
STEREO
PCM
RF coaxial cable
cable receiver / satellite box
cable TV signal
Once connections are completed, turn on the unit and begin
initial setup. Channel scanning is necessary for the unit to
memorize all available channels in your area. [Initial Setup]
➠ p. 11
Note
•• If you have any question about the DTV’s antenna, visit
www.antennaweb.org for further information.
•• Depending on your antenna system, you may need different types
of combiners (mixers) or separators (splitters) for HD TV signal
the minimum RF bandpass on these devices is 2,000MHz or 2GHz.
•• For your safety and to avoid damage to this unit, please unplug the
RF coaxial cable from the antenna input jack before moving the
unit.
•• If you did use an antenna to receive analog TV, it should also
work for DTV reception. Outdoor or attic antennas will be more
effective than a set top or inside antenna.
•• To switch your reception source easily between antenna and cable,
install an antenna selector.
•• If you are not receiving a signal from your cable service, contact the
Cable provider.
You can also connect this unit to the cable receiver or satellite
box other than the HDMI or the Component Video output jacks
or Composite Video output jack (➠ p. 26) because they might
have different output jacks.
Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the clear QAM may
differ depending on the cable / satellite provider or local TV
broadcaster.
For more information, please contact your cable / satellite provider
or local TV broadcaster.
Note
•• Use an HDMI cable with the HDMI logo (a certified HDMI cable).
High Speed HDMI cable is recommended for the better compatibility.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are made.
Caution:
•• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this
range may result in fire or electrical shocks.
Note
•• Each time you plug in the AC power cord, no operations will be
performed for a few seconds. This is not a malfunction.
4
Use ◄/► to select the desired location setting, then press
OK.
Initial Setup
Initial Setup
Select “Retail” or “Home” for your location.
Before you begin:
Make sure the unit is connected to antenna or cable.
3
Use ▲/▼ to select the on-screen language from the
choices (English / Español / Français) on the right side of the
TV screen, then press OK.
Use ▲/▼ to select [Antenna] for TV channels or [Cable]
for CATV channels, then press OK.
Initial Setup
Cable
Select your signal source.
Skip
Antenna
Or
Cable
Select
ANT.IN
OK
Back
OK
• Select [Retail] store, the unit will be set up with
predefined setting for retail displays.
• Select [Home], the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality according
to your preference. Use this setting to remove the
E-Sticker if visible from the display. ➠ p. 23
• When the initial setup is completed, the lowest
memorized channel with the confirmation message of
the location setting will be displayed on the TV screen.
• You must set [Home] in step 4. Otherwise, [Picture]
and [Sound] settings you adjusted will not be
memorized after the unit goes into standby mode.
Note
•• If you are not receiving a signal from your cable service, contact
the Cable provider.
•• If you press or MENU during autoprogram, this setup of TV
channels will be canceled.
•• The initial autoprogram function can be executed for either
[Antenna] or [Cable] only once. When you change the
connection (Antenna / Cable), set [Autoprogram] again. ➠ p. 17
•• If there is no signal input from the antenna terminal and no
operation for several seconds after you turn on the unit, helpful
hints appears. Follow the instructions listed on the TV screen.
CONNECTING DEVICES
Antenna
Make sure the antenna is connected to ''ANT. IN'' jack.
Select
USING FUNCTIONS
2
After making all the necessary connections,
press to turn on the unit.
• It may take a few moments to turn on the unit for the
first time.
• [Initial Setup] menu appears automatically after the
unit is turned on.
Home
Retail
WATCHING TV
1
PREPARATION
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and autoprogram, which automatically scans and memorizes
viewable channels.
11
INTRODUCTION
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
English
Skip
Initial Setup
Retry
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the "ANT. IN" jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to the
box and press “SOURCE” key on the remote control to select
the appropriate source input.
Initial Setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
0 ch
Analog channels
0 ch
Select
Skip
OK
After an initial setup is completed...
Skip
• If you want to scan the channels automatically again.
[Autoprogram] ➠ p. 17
• You can add the desired cable and analog channels
unmemorized by autoprogram.
[Add Channels]
➠ p. 18
• If you want to change to another language.
[Language]
➠ p. 23
• If you want to change the location setting.
[Location] ➠ p. 23
INFORMATION
Digital channels
Later
USEFUL TIPS
• [Autoprogram] will begin.
12
WATCHING TV
Switching Each Input Mode
can easily switch with the remote control
between TV (ATSC or NTSC) and external devices when they are connected to the unit.
Press SOURCE or CH ▲ repeatedly to cycle through the input modes.
e.g.)
11.1
Source
TV
HDMI1
HDMI1
HDMI2
HDMI2
Video
Component
PC
Video
HDMI1
HDMI2
SOURCE
DTV / TV channel
SLEEP
PC
Video
Component
or
FREEZE
BACK
• Pressing CH ▼ reverses the direction of the input modes.
will be displayed if you connected component video cables
* [toComponent]
this unit.
FORMAT
ECO
OK
Sleep Timer can set the unit to go into standby mode after an incremental period of time.
Press SLEEP repeatedly to change the amount of time (increases
Sleep
the time by 30 minutes up to 120 minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is
displayed.
MENU
INFO
120min.
SAP
VOL
MUTE
CH
1
2
3
4
5
6
7
8
9
PREV CH
0
.
Sound Functions describe how to change the audio or the audio language as
well as the volume.
Volume Adjustment
Use VOL
/
Volume
to adjust the volume.
30
will be displayed for a few seconds when adjusting the volume.
Silence Mode
Press MUTE
hi!
salut!
hola
Mute
to turn off the sound temporarily.
will be displayed for a few seconds.
! • Press MUTE
volume.
again or VOL
/
to recover the original
Switching Audio Mode
ATSC
Press SAP repeatedly to cycle through the available audio languages.
•• Available languages differ depending on the broadcast.
•• [Other] is displayed when the audio language cannot be
acquired, or the acquired languages are other than English,
Spanish or French.
11.1
English 1/3
NTSC
Press SAP to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to cycle through
the available audio channel.
11
SAP / STEREO
e.g.) When all audio are available
SAP / STEREO
SAP / MONO
SAP / STEREO
STEREO : Outputs stereo-audio
SAP
: Outputs second audio program
MONO : Outputs mono-audio
English
INTRODUCTION
Freeze Mode can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
Freeze
• The sound output will not be paused.
• To cancel freeze mode, press any buttons except y.
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
Press FORMAT
repeatedly to switch the TV aspect ratio.
is shortened horizontally. Sidebars appear on both
edges of the screen.
Normal
4:3
Movie expand
Movie expand displays a 16:9 picture that is
vertically stretched to fill the screen. This only crops
out the top of the picture.
without changing its horizontal and vertical ratio.
Wide displays a horizontally stretched picture. This
Wide
crops out the left and right sides of the picture.
Zoom
For 4:3 video signal
Normal displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9 displays a 4:3 picture at a 16:9 size; the picture
Normal
16:9
Movie expand
Wide
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to
fill the screen. This crops out the top and bottom of
the picture.
Zoom
CONNECTING DEVICES
is stretched horizontally to fill the screen.
Movie expand displays a 4:3 picture at a 16:9 size;
USING FUNCTIONS
Zoom displays a 16:9 picture at its maximum size
WATCHING TV
Normal displays a 16:9 picture at its original size.
4:3 displays a 16:9 picture at a 4:3 size; the picture
PREPARATION
TV Screen Display Mode
For 16:9 video signal
13
Wide displays the picture with its center at the
Normal displays a proportionately stretched
picture. Sidebars appear on both edges of the screen.
For PC input signal
Full displays a picture that is stretched out of
proportion horizontally to fill the screen.
USEFUL TIPS
original size and the edges stretched horizontally to
fill the screen.
Unscaled displays a picture in its original size.
Full
INFORMATION
Normal
Unscaled
Channel Selection
Select channels by using CH ▲/▼ or the Number buttons.
• To select the memorized channels, use CH ▲/▼ or the Number buttons.
• To select the non-memorized channels, use the Number buttons.
11.1
To use the Number buttons
NTSC
ATSC
-- When selecting digital channel 11.1
Be sure to press • before entering the subchannel number.
1
1
.
1
OK
-- When selecting cable or analog channel 11
1
1
OK
Press PREV CH to return to the previously viewed channel.
Note
•• [No Signal] will appear on the TV screen after the subchannel broadcast is over.
•• [Audio only program] message will appear on the TV screen, when you receive only sound signal.
14
TV Screen Information
ECO
You can display the currently selected channel or other
information such as the audio mode on the TV screen.
In the digital mode, the detailed broadcasting information
for the current off the air channel such as program title and
program guides are displayed.
You can turn on ECO Mode to conserve power.
1
Press INFO.
ECO
ATSC
1
2
3
A Day of Memories
4
11.1
KABC
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were
English 1/2
1080i
1080i
HD
HD
Rating
16:9
16:9
CC
CC
TV: TV-14
5
6, 7, 8
9
10
NTSC
4
11
SAP / STEREO
480i
480i
SD
SD
4:3
4:3
TV-PG DLSV CC
CC
5
6, 7, 8
9
10
1 program title
2 program guide
(The program guide added to broadcasting
information is displayed to a maximum of 4 lines.)
3 broadcast station
4 channel number
5audio language (ATSC) / audio mode (NTSC)
[Switching Audio Mode] ➠ p. 12
6 effective scanning lines and scan mode
7 TV format
8 program’s image aspect ratio
9 CC (not available if closed caption is set to [Off])
10 child lock rating
2
Press ECO once to turn on ECO Mode and reduce
power consumption.
Press ECO again to turn off ECO Mode.
Press INFO or BACK to hide the information.
Note
•• When the program guide consists of more than 4 lines, use ▲/▼
to scroll to the next / previous lines.
•• [No description provided.] is displayed when the program guide
is not provided.
•• While the program guide is displayed, the closed caption function
is interrupted.
•• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to Video Input jack.
Video
480i
480i
SD
SD
CC
TV-PG DLSV CC
•• The information display will automatically disappear in 1 minute.
Off
ECO
On
Reduces power consumption
Off
Sets the backlight brighter.
On
Note
•• You must set [Home] in [Location]. ➠ p. 23
Otherwise, the settings you adjusted will not be saved when the
unit goes into standby mode.
English
INTRODUCTION
USING FUNCTIONS
This section describes the overview of the main menu
displayed when you press MENU.
The main menu consists of the function setting items below.
2
Press MENU to display
the main menu.
SOURCE
SLEEP
BACK
FORMAT
Picture
ECO
Sound
Setup
Adjusting the picture mode, or customize the
picture quality as your preference.
OK
MENU
INFO
Sound
SAP
Language
CH
1
2
3
4
5
6
Adjusting the sound mode, equalizer and some
other sound functions.
USB
7
8
9
PREV CH
0
.
Setup
➠ p. 17
Scanning the channels available in your area and
see what the antenna levels are.
➠ p. 18
Adjusting the Closed Caption, parental guide and
some other useful functions.
➠ p. 23
You can choose English, Spanish, or French
as your on-screen language.
USB
➠ p. 24
You can view picture (JPEG) and video (Motion
JPEG) files stored on a USB storage device.
3
When the setting is completed, press MENU to exit.
INFORMATION
Language
USEFUL TIPS
Features
CONNECTING DEVICES
MUTE
➠ p. 16
USING FUNCTIONS
Features
VOL
➠ p. 16
WATCHING TV
Picture
FREEZE
Use ▲/▼ to select a desired menu and an item, then
press OK to determine the setting.
PREPARATION
1
15
16
Picture
Sound
Before you begin:
You must set [Home] in [Location]. ➠ p. 23
Otherwise, the settings you adjusted will not be memorized
after the unit goes into standby mode.
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
You must set [Home] in [Location]. ➠ p. 23
Otherwise, the settings you adjusted will not be memorized
after the unit goes into standby mode.
1
Picture
Picture
Setup
Features
Language
Personal
Brightness
30
Contrast
60
Color
36
Tint
0
Sharpness
0
Color Temperature
Normal
Noise Reduction
USB
Use ▲/▼ to select the item you want to adjust, then press
OK.
Sound
Picture
Smart Picture
Sound
2
Before you begin:
Standard
Equalizer
Setup
Features
Virtual Surround Sound
On
Auto Volume Leveling
Off
TV Speakers
On
Primary MTS
Stereo
Language
On
USB
2
Adjust the following items.
Smart Sound
Sound
Adjust the following items.
Smart Picture
Smart Sound
Use ▲/▼ to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie], and [Game])
Use ▲/▼ to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music], and [News])
Brightness, Contrast, Color, Tint, Sharpness,
Color Temperature
Equalizer
You can only adjust the following options when you set to
[Personal] in [Smart Picture].
Use ▲/▼ to select the desired setting, then press OK. Then
use ◄/► to adjust the setting.
Cursor ◄
Cursor ►
Brightness
to decrease brightness
to increase brightness
Contrast
to decrease contrast
to increase contrast
Color
to decrease color
intensity
to increase color
intensity
Tint
to add red
to add green
Sharpness
to soften
to sharpen
Color
to select the desired setting, then press OK
Temperature (Warm, Normal and Cool)
Noise Reduction
Reduces the noise of the picture.
Use ▲/▼ to select the desired option, then press OK.
On
Reduces noise in an image.
Off
Sets noise reduction to off.
Note
•• This function is disabled when PC input is selected. (Setting will be
in gray.)
Adjust tonal quality for each frequency.
Use ◄/► to select the specific frequency and use ▲/▼ to
adjust the level, then press OK.
Virtual Surround Sound
Virtual surround sound gives you the stereophonic virtual
space through your existing 2-channel stereo system.
Use ▲/▼ to select the desired option, then press OK.
On
Emphasized effect.
Off
Natural effect.
Auto Volume Leveling
This function keeps a constant loudness differential between
the TV commercials and the programs.
Use ▲/▼ to select the desired option, then press OK.
On
Reduces volume differences between the
TV commercials and the programs.
Off
Removes the auto volume leveling.
English
Autoprogram
Select the audio output from the unit’s speakers, or not. If your
amplifier is HDMI link function compatible and connected by
an HDMI cable to this unit, some sound operations such as
volume up can be changed by using this unit’s remote control.
Make sure [fun-Link Control] is set to [On]. ➠ p. 22
If you switch wires (e.g. between antenna and CATV) or if you
move the unit to a different area after the initial setting, or if
you restore the DTV channels you deleted, it is recommended
to use Autoprogram to perform a new channel search.
The sound will be output from the unit’s speakers.
Off
The sound will not be output from the unit’s
speakers.
Ext. Amp
You can control audio output from your
connected HDMI link devices by using this unit's
remote control.
Use ▲/▼ to select [Autoprogram], then press OK.
Use ▲/▼ to select an appropriate option, then press OK.
Setup
Features
•• We do not guarantee 100% interoperability with other brands of
HDMI link compliant devices.
•• [Unmute] may be displayed on the TV screen when you recover
the volume from your amplifier.
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output
mode by pressing SAP. [Sound Functions] ➠ p. 12
Mono
Outputs mono-audio.
SAP
Outputs second audio program.
ANT.IN
• When connected to VHF / UHF antenna, select [Antenna].
• When connected to CATV, select [Cable].
• [Autoprogram] will begin.
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
75%
Digital channels
10 ch
Analog channels
6 ch
Exit
Setup
Autoprogram
Channel List
Add Channels
Antenna
Features
Language
USB
Adjust the following items.
INFORMATION
Use ▲/▼ to select the item you want to adjust, then press
OK.
•• After setting [Autoprogram], using CH ▲/▼ on the remote
control skips unavailable programs automatically.
•• If you are not receiving a signal from your cable service, contact
the Cable provider.
•• If you press or MENU during autoprogram, the setup of TV
channels will be canceled.
•• Even if [Autoprogram] is completed, the channel setting will be
lost if the AC power cord is unplugged before the unit goes into
standby mode by pressing .
•• The PIN code will be required once you set a PIN code in the
[Child Lock]. ➠ p. 20
•• If you want to change your PIN code, follow the instruction of
[Change PIN]. ➠ p. 21
USEFUL TIPS
Make sure the unit is connected to antenna or cable.
Setup
Or
Note
Before you begin:
Sound
Cable
USB
• When the scanning and memorizing are completed, the
lowest memorized channel will be displayed.
Setup
Picture
Cable
CONNECTING DEVICES
Outputs stereo-audio.
Antenna
Antenna
Language
Use ▲/▼ to select the desired option, then press OK.
Stereo
Back
USING FUNCTIONS
Primary MTS
2
Auto program will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Select your signal source.
Sound
Note
1
Autoprogram
Picture
WATCHING TV
On
1
2
PREPARATION
Use ▲/▼ to select the desired option, then press OK.
INTRODUCTION
TV Speakers
17
18
Channel List
Antenna Confirmation
ATSC
The channels selected here can be skipped when selecting the
channels using CH ▲/▼.
Those channels can still be selected with the Number buttons.
This function lets you check the digital signal strength of each
channel.
1
2
1
2
Use ▲/▼ to select [Channel List], then press OK.
Use ▲/▼ to select the channel you want to remove, then
press OK.
Picture
Sound
Setup
Channel List
Highlight channels for
Ch Up / Down key selection.
6.1
DTV
8.1
9
27
DTV
Features
DTV
Ch Select
Watch / Skip
Use the Number buttons or CH ▲/▼ to select the
channel for which you want to check the digital signal
strength.
11.1
Picture
48.1
Language
USB
DTV
Use ▲/▼ to select [Antenna], then press OK.
Antenna Back
Sound
58
67.1
Setup
Back
Current 50 Max
Features
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH ▲/▼.
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
50
Language
USB
Ch Change
Note
•• If the channel is set to analog channel or external input, you
cannot confirm the antenna condition.
Note
•• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the initial setting.
1
2
Features
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Picture
Sound
Use ▲/▼ to select [Add Channels], then press OK.
Setup
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
11
Picture
Sound
Add Channels
Setup
For analog channels, select a
channel to be added using
number keys.
Features
For digital channels, you must
perform Autoprogram function.
Language
USB
Ch Change
Back
Note
•• If setup completes successfully, [Added to the channel list.] is
displayed.
•• If external input is used, it is not possible to register the channel
and [Unavailable] will be displayed on the TV screen.
•• By using CH ▲/▼, you can select the memorized channels only.
2
Closed Caption
Child Lock
ECO
On
PC Settings
Features
fun-Link (HDMI CEC)
Location
Home
Language
E-Sticker
− −
USB
Add Channels
Features
Current Software Info
Adjust the following items.
English
Note
•• [Digital Caption Service] that you can switch differs depending on
the broadcast description.
You can view closed captioning (CC) for TV programs,
movies and news. Closed caption refers to text of dialog or
descriptions displayed on-screen.
C. Caption Style
Closed Caption
Picture
Sound
Caption Service
Off Digital Caption Service
Off Caption Style
Setup
Features
ATSC
You can change the caption style such as font, color or size,
A etc.
B
C
1 Use ▲/▼ to select [Caption Style], then press OK.
USB
Use ▲/▼ to select [User Setting], then press OK.
Use ▲/▼ to select [On], then press OK.
Use ▲/▼ to select an item, then press OK. Then use
▲/▼ to select the desired setting and press OK.
Picture display
S o, you must be Philip. H i!
I’m pleased to meet yo u.
OK.
Select if you do not want caption service.
CC-1 and T-1
The primary caption and text services.The
captioning or text is displayed in the same language
as the program’s dialog (up to 4 lines of script on the
TV screen, where it does not obstruct relevant parts
of the picture).
CC-3 and T-3
Serve as the preferred data channels.
The captioning or text is often a secondary
language.
CC-2, CC-4,
T-2 and T-4
Rarely available and broadcasters use them only in
special conditions, such as when [CC-1] and [CC-3]
or [T-1] and [T-3] are not available.
Edge
(Edge Color and Edge Type)
Font
(Font Style, Font Size, Font Color and Font Opacity or
Transparency)
Background
(Background Color and Background Opacity or
Transparency)
• Review your setting choice made below by looking in
the upper right corner of the displayed setting box (not
all selections show the differences selected).
Displays input characters on the TV screen
immediately.
Pop-on mode
Once characters are stored in memory, they are
displayed all at once.
Roll-up mode
Displays the characters continuously by scrolling
(max. 4 lines).
Font Style
Font
Background
B. Digital Caption Service
Edge
ATSC
In addition to the basic closed caption, DTV has its own closed
caption called digital caption service. Use this menu to change
the settings for digital caption service.
1
2
Use ▲/▼ to select [Digital Caption Service], then press
OK.
Use ▲/▼ to select the desired digital caption service, then
press OK.
Off
CS-1 to CS-6
Select if you do not want digital caption
service.
Select one of these before changing any
other item in [Closed Caption] menu.
Choose [CS-1] under normal circumstances.
Font Size
Font Color
Closed captioning font style, size,
color and opacity can be changed.
Font
Opacity
Background
Color
Background color and opacity of the
Background displayed caption can be switched.
Opacity
Edge Color
Edge Type
Edge color and type of the displayed
caption can be switched.
INFORMATION
Paint-on
mode
USEFUL TIPS
• There are 3 display modes according to programs:
CONNECTING DEVICES
Off
USING FUNCTIONS
A. Caption Service
1 Use ▲/▼ to select [Caption Service], then press OK.
2 Use ▲/▼ to select the desired closed caption, then press
2
3
4
WATCHING TV
Language
PREPARATION
Use ▲/▼ to select [Closed Caption], then press OK.
See the following description for setting each item.
INTRODUCTION
Closed Caption
19
20
Note
•• Closed caption will not be displayed when you are using an HDMI
connection.
•• To show the closed caption on your TV screen, broadcast signal
must contain the closed caption data.
•• Not all TV programs and commercials have the closed caption or
all types of the closed caption.
•• Captions and texts may not exactly match the TV voice.
•• Changing channels may delay the closed caption for a few seconds.
•• Adjusting or muting the volume may delay the closed caption for
a few seconds.
•• Abbreviations, symbols and other grammatical shortcuts may be
used in order to keep pace with the on-screen action. This is not
a malfunction.
•• The caption or text characters will not be displayed while the
main menu or functions display is shown.
•• If a black box appears on the TV screen, this means that the closed
caption is set to the text mode. To clear the box, select [CC-1],
[CC-2], [CC-3], [CC-4] or [Off].
•• If the unit receives poor quality television signals, the captions may
contain errors, or there might be no captions at all. Some possible
causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
- Data dropout and Pixelation (for DTV only)
•• The unit retains the closed caption setting if the power fails.
•• When the unit receives special effects playback signal (e.g. Search,
Slow and Still) from a VCR’s video output channel (ch3 or ch4),
the unit may not display the correct caption or text.
Child lock reads the ratings for programs, then denies access
to the programs which exceed the rating level you set. With
this function, you can block certain programs inappropriate
for children and any channels or external input modes can be
invisible.
Use ▲/▼ to select [Child Lock], then press OK.
Picture
Sound
Setup
2
Setup
A
B
C
US Movie Ratings Lock
US TV Ratings Lock
Canadian English Rating
Canadian French Rating
Language
Clear Region Ratings Lock
Region Ratings Lock
Change PIN
D
Note
•• When you select a rating and set it to [Block], the higher ratings
will be blocked automatically. The lower ratings will be available for
viewing.
•• When you set the highest rating to [View], all ratings turn to
[View] automatically.
•• To block any inappropriate programs, set your limits in [US Movie
Ratings Lock], [US TV Ratings Lock] and [Region Ratings Lock].
•• The child lock setting will be retained after a power failure or after
the power is removed for longer than 10 seconds (except the PIN
code reverts to 0000). [Child Lock] ➠ p.20
•• If the rating is blocked, will appear.
•• [Region Ratings Lock] will be available when the unit receives a
digital broadcast using the new rating system.
•• For the United States, the unit may download the Region Ratings
Lock Table, if required.
•• The Canadian rating systems on this unit are based on CEA-766-A
and CRTC policy.
Particular channels or external input modes can be invisible in
this function.
1
2
Closed Caption
Use ▲/▼ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
Channel Lock
HDMI1
Sound
Child Lock
ECO
On
Location
Home
Language
E-Sticker
− −
40.3 DTV
-
-
Features
• When you have not set up your PIN code,
enter 0, 0, 0, 0.
• When the PIN code is correct, [Child Lock] menu is
displayed.
See the following description for setting each item.
Select
View / Block
Back
Component] will be displayed if you connected component
* [video
cables to this unit.
Use the Number buttons to enter the 4-digit numbers for
your PIN code.
-
PC
40.2 DTV
Language
USB
Video
40.1 DTV
Features
Current Software Info
-
HDMI2
Setup
PC Settings
Enter PIN.
Use ▲/▼ to select [Channel Lock], then press OK.
Picture
fun-Link (HDMI CEC)
Setup
Channel Lock
Features
USB
Features
Features
USB
Sound
Child Lock
A. Channel Lock
Child Lock
1
Picture
B. Setting US Movie ratings
US Movie ratings lock is the rating system created by MPAA.
1
2
Use ▲/▼ to select [US Movie Ratings Lock], then press
OK.
Use ▲/▼ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
21
English
X
Sound
R
Features
PG
PG-13
G
USB
Select
Rating
Setup
TV-14
Features
View / Block
TV-G
FV
Select
V
Violence
R
Restricted; under 17 requires accompanying
parent or adult guardian
S
Sexual Situation
L
Coarse Language
PG-13
Unsuitable for children under 13
D
Suggestive Dialog
PG
Parental guidance suggested
G
General audience
NR
No rating
•• Blocked sub rating will appear beside the main rating category in
[US TV Ratings Lock] menu.
•• You cannot block a sub rating (D, L, S or V) if the main rating is set
to [View].
•• Changing the category to [Block] or [View] automatically changes
all its sub ratings to the same ([Block] or [View]).
Use ▲/▼ to select [US TV Ratings Lock], then press OK.
US TV Ratings Lock
FV
V
S
L
D
TV-MA
TV-G
TV-PG
USB
TV-Y7
Although the default PIN code (0000) is supplied with the unit,
you can set your own PIN code.
1
2
Use ▲/▼ to select [Change PIN], then press OK.
Press the Number buttons to enter the new 4-digit PIN
code.
• Enter PIN code again in [Confirm PIN.] entry field.
TV-Y
Select
View / Block
Picture
Back
Change PIN
Sound
Rating
Category
Setup
Mature audience only
higher
TV-14
Unsuitable for children under 14
TV-PG
Parental guidance suggested
Language
TV-G
General audience
USB
TV-Y7
Appropriate for all children 7 and
older
TV-Y
Appropriate for all children
Features
Enter PIN.
-
-
-
-
Confirm PIN.
-
-
-
-
PIN Code
Back
Note
lower
To set the sub ratings
As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the
sub ratings to block specific elements of programming. To set
the sub ratings, follow the step below.
Use ▲/▼ / ◄/► to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
•• Make sure new PIN code and confirm PIN code must be exactly
the same. If they are different, the space is cleared for reentering.
•• Your PIN code will be erased and returns to the default PIN code
(0000) when a power failure occurs.
•• If you forget the PIN code, unplug the AC power cord then wait
for 10 seconds to plug the AC power cord in again.
The unit will restore the PIN code to 0000 as the factory default.
INFORMATION
TV-MA
USEFUL TIPS
Language
D. Change PIN
CONNECTING DEVICES
Use ▲/▼ / ◄/► to select the desired rating, then press
OK repeatedly to switch between [View] and [Block].
Features
TV-14, TV-PG
Note
C. Setting TV ratings
TV-14
TV-MA
TV-14
TV-PG
USING FUNCTIONS
No one under 17 admitted
Setup
Rating
TV-Y7
WATCHING TV
NC-17
Sound
Back
Category
Mature audience only
Picture
View / Block
Fantasy Violence
X
1
2
D
TV-Y
Sub Rating
Category
L
TV-Y7
USB
Back
S
TV-PG
Language
NR
V
TV-MA
PREPARATION
Language
FV
Sound
NC-17
Setup
US TV Ratings Lock
Picture
INTRODUCTION
US Movie Ratings Lock
Picture
22
ECO
Clock, Phase
Use ◄/► to adjust [Clock] setting to stabilize the PC screen
and [Phase] setting to improve the clarity of the PC screen.
You can turn on ECO Mode to conserve power.
1
2
Use ▲/▼ to select [ECO], then press OK.
Cursor ◄
Clock
Use ▲/▼ to select the desired mode, then press OK.
On
Reduces power consumption
Off
Sets the backlight brighter.
•• You must set [Home] in [Location]. ➠ p. 23
Otherwise, the settings you adjusted will not be saved when the
unit goes into standby mode.
•• You can also press ECO directly to switch the desired setting.
➠ p. 14
•• You may not obtain an appropriate screen with
[Auto Adjustment] for some signals. In this case, adjust the settings
manually.
•• Adjust [Phase] setting after [Clock] setting has been properly
adjusted.
fun-Link (HDMI CEC)
PC Settings
This function lets you adjust the PC screen position, clock and
phase during PC input.
This function allows you to operate the linked functions
between our brand devices with a fun-Link feature and this
unit connecting through an HDMI cable.
1
Use ▲/▼ to select [PC Settings], then press OK.
Use ▲/▼ to select the setting you want to adjust, then
press OK.
Setup
Features
Setup
Horizontal Position
0
Vertical Position
0
Clock
0
Phase
0
Language
USB
Auto Adjustment
Auto Adjustment
Cancel
To automatically synchronize
the phase and clock
on the TV and PC.
Setup
On
Auto Device Off
On
Auto TV On
On
Device List
Language
USB
Use ▲/▼ to select the desired setting, then press OK.
Adjust the following items.
fun-Link Control
Use ▲/▼ to select [Adjust], then press OK.
Sound
fun-Link Control
Features
2
3
Adjust the following items.
Picture
fun-Link (HDMI CEC)
Sound
Auto Adjustment
Sound
Use ▲/▼ to select [fun-Link (HDMI CEC)], then press
OK.
Picture
PC Settings
Picture
3
to increase setting
value
Note
Note
1
2
to decrease setting
value
Phase
Cursor ►
Set the fun-Link [On] or [Off].
The following additional settings will be grayed out when you
set to [Off].
Adjust
Use ▲/▼ to select the desired setting, then press OK.
Features
On
Selects if you have connected an external device
that is compatible with the fun-Link function.
Language
Off
Disables all fun-Link.
Auto Device Off
USB
• The horizontal/vertical position, clock and phase of the
PC screen are automatically adjusted.
You can set your device to turn off by interlocking from this
unit’s power.
Use ▲/▼ to select the desired setting, then press OK.
Horizontal Position,Vertical Position
Use ◄/► to adjust.
Cursor ◄
Cursor ►
Horizontal
Position
to move PC screen left
to move PC screen right
Vertical
Position
to move PC screen
down
to move PC screen up
On
Your connected fun-Link device turns off
automatically when the unit goes into standby
mode.
Off
Your connected fun-Link device stays on even if
the unit goes into standby mode.
English
This unit will turn on when the power on signal is sent from
your connected fun-Link device.
Use ▲/▼ to select the desired setting, then press OK.
This unit turns on automatically when you turn on
your connected fun-Link device.
Off
This unit stays in standby mode even if you turn on
your connected fun-Link device.
Device List
This function lets you see the product model number or name
of connected devices.
Device List
Sound
Use ▲/▼ to select [E-Sticker], then press OK.
Use ▲/▼ to select [Off], then press OK.
Off
You can turn off E-Sticker.
Top
E-Sticker is displayed on top of the TV screen.
Bottom
E-Sticker is displayed on bottom of the TV screen.
Note
HDMI1
NB620SL2
HDMI2
MBP5230
•• If you select [Home], E-Sticker will not be displayed.
Setup
Current Software Info
Features
Refresh
Back
1
2
Location
Use ▲/▼ to select [Current Software Info], then press
OK.
Confirm the version of the software currently used.
1
2
Picture
Setup
The unit is set to maximize the energy efficiency
for home setting and it can be adjusted through a
choice of picture and sound quality according to
your preference.
XXXXXXX_XX_XX_XXXX_XX
Language
USB
USEFUL TIPS
Home
Release Version:
Features
Use ▲/▼ to select the desired location, then press OK.
Retail
Back
Sound
Use ▲/▼ to select [Location], then press OK.
The unit will be set up with predefined settings
for retail displays. In this setting, you can set the
backlight brighter.
Current Software Info
CONNECTING DEVICES
You must set [Home] in this setting. Otherwise, [Picture] and
[Sound] settings you adjusted will not be memorized after you
turn off the unit.
USING FUNCTIONS
This function shows what version of the software currently
used.
Language
USB
1
2
WATCHING TV
Picture
When you select [Location] to [Retail] store, E-Sticker
(Electronic Sticker) is displayed.
E-Sticker can be turned Off using procedure below.
PREPARATION
On
E-Sticker
INTRODUCTION
Auto TV On
23
Language
Picture
Sound
Setup
Features
Language
  Select your menu language.
English
  Seleccione el idioma para el menú.
Español
  Sélectionnez la langue du menu.
Français
Language
USB
Note
•• If you need the English menus instead of the Spanish or French
menus, press MENU. Use ▲/▼ to select [Idioma] or [Langue],
then press OK.
Use ▲/▼ to select [English], then press OK.
Press MENU to exit the main menu.
INFORMATION
Use ▲/▼ to select [English], [Español] or [Français], then
press OK.
24
Item
USB
Detail
➀
Press 1 to display file details below.
[Name], [Album], [Date], [Size] and [Next].
Press 1 again to remove file details.
➃
Press 4 or OK to start the slide show.
While the slide show is on, the following 2 settings
will be displayed.
This unit can play picture (JPEG) and video (Motion JPEG) files.
Use the USB storage device that contains those files.
More Detail
1
Start show
2
Insert the USB storage device into the USB terminal on
this unit. The main menu appears automatically.
Use ▲/▼ to select [USB] and press OK.
The highlighted text will move to the name of your USB
storage device, then press OK again.
➃
Press 4 or OK to stop the slide show.
While the slide show is off, the following 2 settings
will be displayed.
➁
Every press on 2 will turn the picture clockwise by
90 degrees.
➂
Press 3, then use ▲/▼ to select the zoom factor
(1x, 2x or 4x). Press OK to set the zoom factor.
Stop show
This menu allows you to enjoy
your pictures and videos
via your USB device.
Setup
Features
Rotate
Language
Zoom
USB
Use ▲/▼ to select [Picture] or [Video] and then press
OK.
Picture (JPEG)
1
Press 3, then use ▲/▼ to change the display time
choosing from; [Short], [Medium] and [Long].
Your USB
Sound
3
➂
Slide time
USB
Picture
Press 2, then use ▲/▼ to select the transition
mode choosing from;
Transitions [None], [Dissolve], [Wipe right], [Wipe left], [Wipe
up], [Wipe down], [Box in] and [Box out].
➁
Video (Motion JPEG)
1
Use ▲/▼ to select the desired file, and then press OK.
Use ▲/▼ to select the desired file, and then press OK.
Your USB
Video
Video
MOVIE1.avi
MOVIE1.avi
Title:
Your USB
Picture
MOVIE2.avi
Director:
Picture
Image1.jpg
MOVIE1.avi
MOVIE3.avi
Date:
2009/04/02
Image1.jpg
MOVIE4.avi
Duration:
00:06:37
Image2.jpg
MOVIE5.avi
Image3.jpg
Image4.jpg
1
Image5.jpg
1
2 Thumbnails
3
2
3
4
Supported format: motion jpeg, 320 x 240, 30FPS
Image1.jpg
1200:900
2009:04:02 17:42:06
4
Press “OK” key to play/pause.
• To toggle between [List] and [Thumbnails] press
the Number 2 button each time.
• The unit goes to the slide show automatically.
To pause / play the slide show, press OK.
• Use the Number buttons (1 through 4) to see the file
detail (➀) or change the following settings (➁~➃).
See the description on the top of the next column.
• To stop playback and return to the file list, press
BACK, OK or CH ▲.
• Press CH ▼ to play back from the beginning.
Item
➀
More Detail
Detail
Press 1 to display file details below.
[Title], [Director], [Date] and [Duration].
Press 1 again to remove file details.
English
No supplied cables are used with these connections:
•• Please purchase the necessary cables at your local store.
Before you connect:
Be sure other device is connected properly before plugging in
the AC power cord.
External Device Connection
HDMI Connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
digital video and multi-channel digital audio through a single cable.
WATCHING TV
USING FUNCTIONS
or
HDMI cable
HDMI OUT
TITLE
5
CHAPTER 15
REPEAT A-B
Blu-ray / DVD recorder
with the HDMI output jack
This unit can be connected to your device that has a DVI
terminal. Use an HDMI-DVI conversion cable for this connection
and it requires audio cable for Analog Audio signal as well.
USEFUL TIPS
HDMI-DVI Connection
CONNECTING DEVICES
The files recorded under the following specifications are required.
<Picture (JPEG)>
•• Upper limit :
24 Megapixel
<Video (Motion JPEG)>
Video
•• Size : 320 x 240 (QVGA)
•• Frame rate : 30 fps
Audio
•• LPCM - S ampling frequency
(32 kHz, 44.1 kHz or 48 kHz)
- Quantization bit rate (16 bit)
CONNECTING DEVICES
PREPARATION
•• The unit recognizes only a USB storage device.
•• Do not use a USB hub or an extension cable to connect an
external hard disk drive to the unit. (Not supported.)
•• A USB storage device is always inserted to this unit directly.
•• A USB storage device is not supplied with this unit.
•• We do not guarantee that all USB storage devices can be
supported by this unit.
•• Be sure to keep a backup copy of the original files on your device
before you play them back on this unit. We have no responsibilities
for damage or loss of your stored data.
•• To protect your USB storage device files from being erased place
the write protect sliding tab in the protect position.
•• When you are ready to remove a USB storage device, at first turn
the unit off so it will go into standby mode to avoid any damage
to your data and the unit.
•• A USB storage device that requires its own driver or the device
with a special system such as fingerprint recognition are not
supported.
•• This unit is not allowed to use the USB storage device which
requires an external power supply (500mA or more).
•• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
•• Up to 10,000 files or 1,000 folders with 19 hierarchies can be
recognized.
•• Up to 255 English characters can be recognized.
•• This unit does not support MTP(Media Transfer Protocol).
•• This unit supports FAT16 and FAT32 file systems.
•• If the file is not supported, an error message appears.
•• When the USB storage device is not recognized, try reconnecting
it again.
•• Motion JPEG file with an extension of “.avi” can only be
recognized. An extension of “.mov” is not supported.
•• This unit doesn’t support “pause”, “forward” or “reverse” during
video (Motion JPEG) playback.
INTRODUCTION
Note
25
cable receiver or satellite box with
the DVI output jack
DVI OUT
AUDIO OUT
L
R
To HDMI 1 Input
jack only
HDMI-DVI
conversion cable
audio cables
INFORMATION
STEREO
PCM
26
Note
•• Use an HDMI cable with the HDMI logo (a certified HDMI cable).
High Speed HDMI cable is recommended for the better
compatibility.
For HDMI connection (use HDMI 1 or 2 Input jack)
•• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/30/60Hz
of video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.
•• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2
channel audio signal (LPCM).
•• This unit accepts only signals in compliance with EIA861.
Composite Video Connection
Composite Video connection offers standard picture quality
for video devices connected to the unit. If you connect to the
unit’s Composite Video Input jack (VIDEO), connect audio
cables to the Audio L/R Input jacks below the Composite
Video connector jack. When the Audio is monaural, then only
connect to the Audio L Input jack.
For HDMI-DVI connection
•• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
•• HDMI-DVI connection requires separate audio connections as
well and the audio signals are converted from digital to analog.
•• DVI does not display 480i image which is not in compliance with
EIA/CEA-861/861B.
camcorder
video game
STAND-BY
STEREO
Component Video Connection
VCR
Component Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks right below the Component Video connector jacks.
VIDEO
OUT
AUDIO OUT
L
R
video cable
component video cables
(red / blue / green)
audio cables
Note
audio cables
(green) (blue) (red)
AUDIO OUT
L
R
COMPONENT VIDEO OUT
Y
Pb/Cb
Pr/Cr
TITLE
5
CHAPTER 15
REPEAT A-B
Blu-ray / DVD recorder
with the component video output jacks
•• Whenever you connect to the Composite Video Input jack (VIDEO),
you must disconnect the Component Video Input jacks (Pb and Pr).
If you leave those jacks connected, it may cause of unstable picture.
Digital Audio Output Connection
(for digital broadcasting only)
If you connect this unit to an external digital audio device, you
can enjoy multi-channel audio like 5.1ch digital broadcasting
sound.
Use a digital audio coaxial cable to connect the unit to
external digital audio devices.
Note
•• The unit accepts 480i / 480p / 720p and 1080i of video signals for
this connection.
DIGITAL AUDIO
COAXIAL IN
Dolby Digital
decoder
digital audio coaxial cable
English
USB Storage Device
This unit is equipped with a PC input jack. If you connect this
unit to your PC, you can use this unit as a PC monitor.
Use a VGA cable for this Video connection and it requires a
stereo mini plug conversion cable for Analog Audio signal as
well.
WATCHING TV
audio cables
mini audio cable
VGA cable
The following video signals can be displayed:
Resolution
VGA
640 x
480
SVGA
800 x
600
XGA
WXGA
1,024 x
768
1,280 x
768
1,360 x
768
Refresh rate
60Hz
Note
INFORMATION
•• Please purchase the VGA cable that has a ferrite core.
•• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your
PC.
USEFUL TIPS
Other formats or non-standard signals will not be displayed
correctly.
CONNECTING DEVICES
Format
USING FUNCTIONS
VGA cable should be
with ferrite core.
PREPARATION
personal computer
This unit offers easy playback of picture (JPEG) and video
(Motion JPEG) files.
Insert the USB storage device into the USB terminal shown
below. [USB] ➠ p. 24
INTRODUCTION
PC Connection
27
28
USEFUL TIPS
FAQ
Question
Answer
•
•
•
•
My remote control does not work. •
What should I do?
•
•
•
•
Check the antenna or cable connection to the main unit.
Check the batteries of the remote control.
Check if there is an obstacle between the infrared sensor window and the remote control.
Test the signal output use [IR Signal Check]. ➠ p. 30
If okay, then possible infrared sensor trouble.
Aim the remote control directly at the infrared sensor window on the front of the unit.
Reduce the distance to the unit.
Re-insert the batteries with their polarities (+/– signs) as indicated.
When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote
control signal of this unit.
Move the infrared-equipped device away from this unit, change the angle of the infrared sensor or
turn off the infrared communication function.
How come the Initial setup
appears every time I turn on this
unit?
• Connect the RF coaxial cable to the unit directly and run the initial setup.
• Make sure to complete the channel scan before the unit goes into standby mode.
Why can I not watch some RF
signal TV programs.
• Make sure [Autoprogram] has been completed. ➠ p. 17
• Autoprogram must be completed when you set up the unit for the first time or move it to a location
where previously unavailable channels are broadcast.
• The selected channel may not be broadcasting.
• When [Autoprogram] is interrupted and not completed, some channels will not be received. Make
sure to complete the Autoprogram. ➠ p. 17
• The selected channel cannot be viewed by the [Child Lock] setting. ➠ p. 20
• The unit requires some kind of antenna input. An indoor antenna (VHF / UHF), an external antenna
(VHF / UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.
• Check if the correct input mode is selected by pressing SOURCE or using CH ▲/▼. [Switching Each
Input Mode] ➠ p.12
How come there is no image from • Check the antenna
or cable connection to the unit.
the connected external devices?
• When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/
Cr) connectors are connected to their corresponding colored jacks on the unit.
When I enter a channel number, it
changes automatically.
• Many digital channels have alternate channel numbers. The unit changes the numbers automatically to
the ones signifying the broadcasting station channel number. These basic numbers used for previous
analog broadcasts. (e.g., input ch#30 auto changes to ch#6.1)
Why are captions not displayed
entirely? Or, captions are delayed
behind the dialog.
• Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts.
Most captioning production companies can display a dialog to maximum of 220 words per minute. If
a dialog exceeds that rate, selective editing is used to insure that the captions remain up-to date with
the current TV screen dialog.
How can I set the clock ?
• There is no clock function on this unit.
I cannot change the [Child Lock]
setting because my PIN code no
longer works.
• If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code
is set to the default code “0000”. [Child Lock] ➠ p. 20
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this manual,
check the following chart and all connections once before calling for service.
Symptom
Remedy
No power
• Make sure the AC power cord is plugged in.
• Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the
AC outlet to ensure that AC outlet operates normally.
• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.
Control button's do not work.
• Press only one button at a time. Do NOT press more than one button at the same time.
• Ensure that no buttons on the remote control are depressed and move freely.
Power is ON but no screen image.
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
• Check whether all the cables to the unit are connected to the correct output jack of your device like
Blu-ray / DVD recorder.
• Make sure that the selected input mode is connected to the working input jack.
• Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode. Tap
any key on the keyboard to wake up your computer.
English
No color
• View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
• Adjust [Color] in the main menu.
Adjusted [Picture] or [Sound]
settings are not effective every time • You must set [Home] in [Location]. ➠ p. 23
Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.
the unit is turned on.
• You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent
lights.
• Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture
• Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
You see "noise" or "trash" on the
screen.
• When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will be
increased to match the capabilities of the display of the unit. This may cause noise or trash.
Different color marks on the TV
screen
• View other TV channels. The problem might be limited to the broadcasting station, missing data or
pixelation.
You switch to a different input and
the volume changes.
• This unit will memorize the volume level from the last time you adjusted it.
• If the volume of the sound from another device is higher or lower, then the loudness will change.
You switch to a different input and
the screen size changes.
• This unit will memorize the viewing mode from the last time you used the particular input modes.
The display image does not cover
the entire screen.
• If you are using the unit as a PC monitor, make sure that [Horizontal Position] and [Vertical Position]
in [PC Settings] are set correctly.
• If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input,
repeatedly to switch various screen modes.
press FORMAT
Captions are displayed as a white
box. No caption is displayed in
the Closed Caption-supported
program.
• Interference from buildings or weather conditions may cause captioning to be incomplete.
• Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened program.
Black box is displayed on the TV
screen.
• The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].
Note
•• The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue,
green or red.
This is not to be considered a defect in the LCD screen.
•• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on
correct operations.
INFORMATION
You see a distorted picture or hear
an unusual sound.
USEFUL TIPS
• View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
• Check if the audio cable is connected in correctly.
CONNECTING DEVICES
Picture OK, sound poor
USING FUNCTIONS
Sound OK, picture poor
• Electrical interference from nearby appliances may affect picture quality.
• Adjust [Contrast] and [Brightness] in the main menu.
• View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
• For the best picture quality, watch "High Definition" wide screen programs.
If the HD content is not available, watch "Standard Definition" programs instead.
WATCHING TV
No picture or sound
PREPARATION
Remedy
• Check if the power is on.
• Check if the correct input mode is selected.
• Check whether all the cables to the unit are connected to the correct output jack of your device like
Blu-ray / DVD recorder.
• View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn on
the unit again.
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
• Make sure that the selected input mode is connected to the working input jack.
• Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode. Tap
any key on the keyboard to wake up your computer.
• Make sure that the sound is not muted. Press MUTE
so that the volume bar and current volume
level will appear on the TV screen.
• Make sure that the volume is NOT set to [0] or [Mute]. If so, use VOL / to adjust the desired
volume.
INTRODUCTION
Symptom
29
30
INFORMATION
Glossary
ATSC
Acronym that stands for Advanced Television Systems Committee and
the name of the digital broadcasting standards.
Aspect Ratio
The width of a TV screen relative to its height. Conventional TVs
are 4:3 (in other words, the TV screen is almost square); widescreen
models are 16:9 (the TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand
devices with CEC feature and this unit. We do not guarantee 100%
interoperability with other brands of CEC compliant devices.
Component Video
This is a video signal format that conveys each of 3 principal colors
of light (red, blue and green) through different signal lines. This allows
the viewers to experience picture colors as original as it is. There are
several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress digital
sound. It offers stereo sound (2ch) or multi-channel audio.
E-Sticker
E-Sticker is showing set features, technical information, etc on this TV
set that is displayed on the TV screen. Previously the information was
on a printed sticker that was put on the display.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, digital audio / video formats
including set-top box, Blu-ray / DVD recorder or digital television, over
a single cable.
HDTV (High Definition TV)
Ultimate digital format that produces high resolution and high picture
quality.
NTSC
Acronym that stands for National Television Systems Committee and
the name of analog broadcasting standards.
Off the air NTSC signals are no longer being sent by major
broadcasting stations in the USA.
PIN code
A stored 4-digit number that allows access to parental control features.
SAP (Secondary Audio Program)
Second-audio channel delivered separately from main-audio channel.
This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the NTSC picture quality.
Maintenance
Cabinet Cleaning
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage and
discoloration to the exposed surfaces.
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning
the panel, disconnect the AC power cord.
Servicing
Should your unit become inoperative, do not try to correct
the problem yourself. There are no user serviceable parts
inside. Call our toll free customer support line found on the
cover of this manual to locate an authorized service center.
IR Signal Check
If the remote control is not working properly, you can use a
digital camera (including a cellular phone with built-in camera)
to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point the Digital Camera towards the remote
control infrared diode at the front of the
remote control. Press any button on the
remote control and look through the camera
display. If the infrared pulsating light appears
through the camera, the remote control is
sending out an IR signal.
English
Antenna Input VHF / UHF / CATV
75 Ω unbalanced (F-type)
Audio Input
RCA jack (L/R) x 2
500mV rms
Component / Composite (VIDEO) Video Input jacks for VIDEO
Y/ VIDEO 1V p-p (75 Ω)
RCA jack x 3
Pb/Cb 700 mV p-p (75Ω)
Pr/Cr
700 mV p-p (75Ω)
HDMI Input
HDMI 19 pin x 2
USB InputUSB x 1
PC InputD-Sub 15 pin x 1(RGB)
Digital Audio Output (coaxial)
RCA jack x 1
500 mV p-p (75 Ω)
Remote control
Digital encoded infrared light system
Operating temperature
41 °F (5 °C) to 104 °F (40 °C)
Power requirements
120V~ AC +/− 10%, 60Hz +/− 0.5%
Electrical Specification
Power consumption (maximum)
Audio Output LCD
Dimensions
10W, 8 Ω x 2
<with base>
25.9 inches (656.0 mm)
19.2 inches (487.0 mm)
9.4 inches (238.0 mm)
13.67 lbs. (6.20 kg)
CONNECTING DEVICES
110 W
26 inches
<without base>
Width 25.9 inches (656.0 mm)
Height 17.7 inches (448.0 mm)
Depth 3.7 inches (93.0 mm)
12.57 lbs. (5.70 kg)
Weight
USING FUNCTIONS
Terminals
WATCHING TV
TV format
ATSC / NTSC-M TV standard
Closed Caption system
§15.122 / FCC (digital CC)
§15.119 / FCC (analog CC)
Channel coverage (ATSC / NTSC)
Terrestrial DTV (ATSC)
VHF 2~13
UHF 14~51 (each channel has e.g.
2.1~2.9, 3.1~3.9, etc.)
Terrestrial Analog (NTSC)
VHF 2~13
UHF 14~69
CATV
2~13, A~W,
W+1~W+94 (analog W+1~W+84),
A-5~A-1, 5A
Tuning system
Channel frequency synthesized tuning
system
Channel access
Direct access keyboard,
Programmable scan, and up / down
PREPARATION
Other Specifications
INTRODUCTION
General Specifications
31
USEFUL TIPS
INFORMATION
• Designs and specifications are subject to change without
notice and without our legal obligation.
• If there is a discrepancy between languages, the default
language will be English.
32
LIMITED WARRANTY
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
Limited Warranty
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501