Bartec

Mobile Computer

MC 9090

ex

RFID/LF

MC 9090

ex

RFID/HF

MC 9090

ex

RFID/UHF

Type 17-A1.9-R.../H.…...

Document no. 11-A119-7D0003

Status: 4 August 2010

English

Appendix A

Supplement for User Manual

ATEX Zone 1

UL Class I Division 1

UL Class I, II, III Division 1

This appendix contains information on the RFID devices.

A further applicable document is the user manual for the MC 9090 ex Mobile Computer for

- ATEX Zone 1 or

- UL Class I, Div 1 and

- UL Class I, II, III Div 1

Contents

MC 9090 ex Mobile Computer

RFID

1 Product Description.............................................................................................................................. 1

2 Safety Instructions................................................................................................................................ 2

2.1

Warnings about the Mobile Computers........................................................................................ 2

2.2

Warnings for Use of Wireless Devices......................................................................................... 2

2.2.1

Radio Frequency Interference Requirements - FCC ........................................................ 2

2.2.2

Radio Frequency Interference Requirements – Canada .................................................. 3

2.3

Warnings for screen protection .................................................................................................... 3

3 Technical Data....................................................................................................................................... 4

3.1

RFID/LF Internal Module/only UL................................................................................................. 4

3.1.1

Explosion Pr o tection ......................................................................................................... 4

3.1.2

General Data .................................................................................................................... 4

3.1.3

Radio Data Transmission RFID/LF (Internal module)........................................................ 4

3.1.4

Standards supported by firmware ...................................................................................... 4

3.2

RFID/LF External Module/ATEX and UL...................................................................................... 5

3.2.1

Explosion Protection......................................................................................................... 5

3.2.2

General Data .................................................................................................................... 5

3.2.3

Radio Data Transmission RFID/LF (External module)...................................................... 5

3.2.4

Standards supported by firmware..................................................................................... 5

3.3

RFID/HF External Module/ATEX and UL ..................................................................................... 6

3.3.1


3.3.2

General Data .................................................................................................................... 6

3.3.3

Radio Data Transmission RFID/HF External Module ....................................................... 6

3.3.4

Standards supported by Firmware.................................................................................... 6

3.4

RFID/UHF External Module/ATEX and UL .................................................................................. 7

3.4.1


3.4.2

General Data .................................................................................................................... 7

3.4.3

Radio Data Transmission RFID/UHF External Module..................................................... 7

3.5

RFID/UHF External Module + External Antenna.......................................................................... 8

3.5.1


3.5.2

General Data .................................................................................................................... 8

3.5.3

Radio Data Transmission RFID/UHF External Module + External Antenna ..................... 8

3.6

Information on Applied Directives, Standards, Marking and In-Process Inspections ................... 9

3.6.1

Product Marking on Mobile Computer MC 9090 ex RFID (UL Class I Division 1)............... 9

3.6.2

Product Marking on Mobile Computer MC 9090 ex RFID (UL Class I, II, III Division 1).... 11

3.6.3

Product Marking on Mobile Computer MC 9090 ex RFID (ATEX Zone 1) ........................ 13

4 Commissioning ................................................................................................................................... 15

4.1

MC 9090 ex Manual and Software for Windows Mobile from Motorola........................................ 15

4.2

MC 9090 ex RFID Documentation from BARTEC........................................................................ 15

4.3

MC 9090 ex RFID Software ......................................................................................................... 15

5 Additional Information........................................................................................................................ 16

5.1

Order numbers MC 9090 ex (ATEX Zone 1) ................................................................................ 16

5.2

Order numbers MC 9090 ex (UL Class I Division 1) .................................................................... 17

5.3

Order numbers MC 9090 ex (UL Class I, II, III Division 1)............................................................ 18

Appendix - Declaration of Conformity ..................................................................................................19-22

Technical data subject to change without notice.

Issue 08/2010

Appendix A

Additional Description

1 Product Description


RFID

The MC 9090 ex RFID mobile computer is a compact portable device and is designed by

BARTEC for use in hazardous areas. Accordingly, the extensive communication options, already standard in other areas, are available to the user in hazardous areas also.

The MC 9090 ex RFID mobile computer is available in two versions, with pistol grip

(MC 9090 ex Gun) and without (MC 9090 ex Brick). In these versions, the MC 9090 ex is a compact unit for scanning bar codes and RFID tags reliably.

The scan trigger is ideally positioned on the device, which allows bar codes and RFID tags to be captured easily. The integrated radio module ensures a real-time exchange of data with the host system.

The MC 9090 ex RFID combines the advantages of the Microsoft Pocket PC Platform with the strengths of the Intel® XScale™ PXA270 processor with 624 MHz.

The large, easy-to-read 1/4 VGA colour display is equipped with touch screen technology. The device works with the IEEE802.11 a/b/g (direct sequence) radio standard.


Issue 08/2010

Page 1 of 22

Appendix A


2 Safety Instructions


RFID

2.1 Warnings about the Mobile Computers

MC 9090 ex mobile computer types 17-A119-R ** 6/H *******, type 17-A119-R ** 7 ******* with external RFID/UHF antenna may not be used in processes that generate high charge levels.

High charge levels can occur in particular with electrostatic painting, pneumatically conveyed dust, flowing liquids and droplets, mechanically driven belts, brushes and foils etc.

2.2 Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless devices.

2.2.1 Radio Frequency Interference Requirements - FCC

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

¨ Reorient or relocate the receiving antenna.

¨ Increase the separation between the equipment and receiver.

¨ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

¨ Consult the dealer or an experienced radio/tv technician for help.

Page 2 of 22

Issue 08/2010

Appendix A



RFID

FCC Note according to 15.21

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

2.2.2 Radio Frequency Interference Requirements – Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Label Marking: The Term "IC:" before the radio certification only signifies that "Industry

Canada" technical specifications were met.

2.3 Warnings for screen protection

The screen protection type 17-A1Z0-0003 of the MC 9090 ex Mobile Computer types 17-A119-H ****/ ******* may be used only in the gas group IIB Ex.


Issue 08/2010

Page 3 of 22

Appendix A


3 Technical Data


RFID

3.1 RFID/LF Internal Module/only UL

3.1.1 Explosion Protection

3.1.2

3.1.3

3.1.4

Ex protection type

Certification

Class I Division 1 Groups C and D

UL file E226123

Ex protection type

Certification

General Data

Ambient temperature

Weight including battery

MC9090 ex -K

MC9090 ex -G

Radio Data Transmission RFID/LF (Internal module)

Nominal writing distance

Antenna

Frequency range

Transmitting power

Standards supported by firmware

Firmware version

Btrw-rw.V.1.40.frm

HITAG S256

HITAG S 2 kbit

HITAG 1

HITAG 2


Class II Division 1 Groups F and G

Class III Division 1

UL file E226123

-20 °C to +40 °C approx. 700 g approx. 830 g approx. 5 cm


Btrw-ti.V.1.40.frm

EM 4450/4550

EM4xxx (UNIQUE)

FDX-B

BDE approx. 1.9 inch

Integrated in the device as a ferrite antenna or air coil antenna

125/134 kHz

100 mW ± 2 dB


Btrw-hdx.V.1.40.frm

HDX - RO

HDX (Multipage)

EM4xxx (UNIQUE)

FDX-B

-4 °F to +104 °F approx. 24 oz approx. 29 oz

ATA5567 ISO 117845 ISO Animal

Page 4 of 22

Issue 08/2010

Appendix A



RFID

3.2 RFID/LF External Module/ATEX and UL


Types 17-A119-R..1/H.......

Ex protection type II 2G Ex q [ib] IIC T4

Certification PTB 05 ATEX 2055

Types 17-A129-R..1/H.......

Ex protection type Class I Division 1 Groups C and D

Certification UL file E226123

Types 17-A169-R..1/H.......





3.2.2

3.2.3

3.2.4

General Data

Ambient temperature

Dimension (length x width x height)

MC 9090 ex -K

MC 9090 ex -G

Weight including battery (ATEX)

MC 9090 ex -K

MC 9090 ex -G

Weight including battery (UL)

MC 9090 ex -K

MC 9090 ex -G

Radio Data Transmission RFID/LF (External Module)


Antenna

Frequency range

Transmitting power

Standards supported by firmware

-20 °C to +40 °C -4 °F to +104 °F

231x91x105 mm 9.1x3.6x4.1 inches

231x91x193 mm 9.1x3.6x7.6 inches approx. 1320 g approx. 1400 g approx. 1040 g approx. 1170 g approx. 46 oz approx. 49 oz approx. 40 oz approx. 41 oz approx. 5 cm approx. 1.9 inches

Integrated in the device as ferrite antenna or air coil antenna

125/134 kHz

100 mW ± 2dB


Btrw-rw.V.1.40.frm


Btrw-hdx.V.1.40.frm


Btrw-ti.V.1.40.frm

HITAG S256

HITAG S 2 kbit

HITAG 1

HITAG 2

HDX - RO

HDX (Multipage)

EM4xxx (UNIQUE)

FDX-B

EM 4450/4550

EM4xxx (UNIQUE)

FDX-B

BDE

Q5 BDE

ATA5567 ISO 117845 ISO Animal


Issue 08/2010

Page 5 of 22

Appendix A



RFID

3.3 RFID/HF External Module/ATEX and UL


Types 17-A119-R..2/H.......

Ex protection type II 2G Ex q [ib] IIC T4

Certification PTB 05 ATEX 2055

Types 17-A129-R..2/H.......



Types 17-A169-R..2/H.......





3.3.2

3.3.3

3.3.4

General Data

Ambient temperature


MC 9090

MC 9090 ex ex

-K

-G


MC 9090

MC 9090 ex ex

-K

-G


MC 9090

MC 9090 ex ex

-K

-G

Radio Data Transmission RFID/HF External Module

Supported standards

Nominal reader calibration width

HF ISO 15693

HF ISO 14443


HF ISO 15693

HF ISO 14443

HF ISO 15693

HF ISO 14443 approx. 7 to 12 cm approx. 2.75 to 4.72” approx. 1 to 6 cm approx. 0.4 to 2.36 inches

(with tags in cheque card format) approx. 7 to 12 cm approx. 2.75 to 4.72” approx. 1 to 6 cm approx. 0.4 to 2.36 inches

(with tags in cheque card format)

Antenna integrated

Frequency range

Transmitting power

13.56 MHz

250 mW ± 2 dB

Standards Supported by Firmware

-20 °C to +40 °C -4 °F to +104 °F

231x91x105 mm 9.1x3.6x4.1 inches

231x91x193 mm 9.1x3.6x7.6 inches approx. 1320 g approx. 1400 g approx. 46 oz approx. 49 oz approx. 1040 g approx. 1170 g approx. 40 oz approx. 41 oz

ISO14443-A compatible ISO14443-B compatible ISO15693 compatible e.g. mifare, mifare Ultra

Light, my-d proximity

I-Code 1 (optional) e.g. I-Code SLI, Tag-IT HFI, my-d vicinity, STM LRI512

Page 6 of 22

Issue 08/2010

Appendix A



RFID

3.4 RFID/UHF External Module/ATEX and UL


Types

Ex protection type

Certification

Types

Ex protection type

Certification

Types

Ex protection type

Certification

17-A119-R ** 3/H *******

17-A119-R ** 4/H *******

II 2G Ex q [ib] IIC T4

PTB 05 ATEX 2055

17-A129-R ** 3/H *******


UL file E226123

17-A169-R ** 3/H *******




UL file E226123

3.4.2

3.4.3

General Data

Ambient temperature


MC 9090 ex

-K

MC 9090 ex -G


MC 9090 ex -K

MC 9090ex-G


MC 9090 ex -K

MC 9090 ex -G

-20 °C to +40 °C approx. 1320 g approx. 1400 g approx. 1040 g approx. 1170 g

-4 °F to +104 °F

231x91x105 mm 9.1x3.6x4.1 inches

231x91x193 mm 9.1x3.6x7.6 inches approx. 46 oz approx. 49 oz approx. 40 oz approx. 41 oz

Radio Data Transmission RFID/UHF External Module

Supported standards

Nominal reading range

EPC Class 1 Gen 2 tag approx. 30 to 50 cm approx. 11.8 to 19.6“

Nominal writing distance approx. 30 to 50 cm approx. 11.8 to 19.6“

Antenna integrated

Frequency range

Europe

USA

Transmitting power

865.6 to 867.5 MHz (EN302 208)

902.0 to 928.0 MHz

(FCC CFR 47 part 15.247)

200 mW ± 2dB


Issue 08/2010

Page 7 of 22

Appendix A



RFID

3.5 RFID/UHF External Module + External Antenna


Types

Ex protection type

Certification

Types

Ex protection type

Certification

Types

Ex protection type

Certification

17-A119-R ** 6/H *******

17-A119-R ** 7/H *******


PTB 05 ATEX 2055

17-A129-R ** 5/H *******


UL file E226123

17-A169-R ** 5/H *******




UL file E226123

3.5.2

3.5.3

General Data

Ambient temperature


MC9090 ex -K

MC9090 ex -G


MC9090 ex -K

MC9090 ex -G


MC 9090

MC 9090 ex ex

-K

-G

-20 °C to +40 °C -4 °F to +104 °F

231x119x105 mm 9.1x4.7x4.1 inches

231x119x193 mm 9.1x4.7x7.6 inches approx. 1370 g approx. 1450 g approx. 47 oz approx. 50 oz approx. 1090 g approx. 1220 g approx. 41 oz approx. 42 oz

Radio Data Transmission RFID/UHF External Module + External Antenna

Supported standards

Nominal reading range


Antenna

Frequency range

Europe

USA

Transmitting power

EPC Class 1 Gen 2 Tag approx. 150 cm approx. 150 cm approx. 59 inches external (UPM Raflatac)

865.6 to 867.5 MHz (EN302 208)

902.0 to 928.0 MHz

(FCC CFR 47 Part 15.247)

200 mW ± 2 dB approx. 59 inches

Page 8 of 22

Issue 08/2010

Appendix A



RFID

3.6 Information on Applied Directives, Standards, Marking and In-Process

Inspections

3.6.1 Product Marking on Mobile Computer MC 9090 ex RFID (UL Class I, II, III Division 1)

MC 9090 ex RFID/LF internal

E

Warning laser

No Integrated scan engine!

FCC instructions

Ex protection type see type label MC 9090 ex RFID/LF internal

Type 17-A129… Class I Division 1 Groups C and D

Type 17-A169… Class I Division 1 Groups C and D



Warning laser

No Integrated scan engine!


Issue 08/2010

Page 9 of 22

Appendix A



RFID

E

Type label

Labels in the battery compartment

Licence sticker for Windows Mobile TM 5.0 Premium operating system

Label contains details on the Motorola device before it was modified by BARTEC GmbH.

- CE mark and notified body used by Motorola

- Manufacturer Motorola

(formerly Symbol Technologies Incorporation)

- Type number (part)

- Serial number ((S) S/N)

Important: You will need to quote the type number and serial number when making enquiries directly to the Technical Support department at Motorola.

Page 10 of 22

Issue 08/2010

3.6.2

Appendix A



RFID

Product Marking on Mobile Computer MC 9090 ex RFID (UL Class I, II, III Division 1)

MC 9090 ex RFID/LF/HF/UHF external MC 9090 ex RFID/LF/HF/UHF external

E

Warning laser

Laser compliance and

FCC instructions

CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE

EXPOSURE.

ATTENTION - LUMIÈRE LASER DE CLASSE 3R, EN CAS D’OUVERTURE.

EXPOSITION DANGEREUSE AU FAISCEAU.

VORSICHT - LASERLICHT KLASSE 3R, WENN ABDECKUNG GEÖFFNET.

DIREKTE BESTRAHLUNG DER AUGEN VERMEIDEN.

MC 9090 ex RFID/LF/HF/UHF external

Ex protection type see type label MC 9090 ex RFID/LF/HF/UHF external

Type 17-A129…

Type 17-A169…






Issue 08/2010

Page 11 of 22

Appendix A



RFID


Warning laser

E

Type label



Licence sticker for operating system Windows mobile TM 5.0 Premium

Label contains details on the Motorola device before it was modified by

BARTEC GmbH.

- CE mark and Notified Body used by Motorola





Important: You will need to quote the type number and serial number when making enquiries directly to the Technical Support department at

Motorola.

MC 9090 ex RFID/LF/HF/UHF external and MC 9090 ex RFID/LF internal

Page 12 of 22

Issue 08/2010

3.6.3

Appendix A



RFID

Product Marking on Mobile Computer MC 9090 ex RFID (ATEX Zone 1)

MC 9090 ex RFID/LF/HF/UHF external MC 9090 ex RFID/LF/HF/UHF external

E

Warning laser

Laser compliance and

FCC instructions

CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE

EXPOSURE.

ATTENTION - LUMIÈRE LASER DE CLASSE 3R, EN CAS D’OUVERTURE.

EXPOSITION DANGEREUSE AU FAISCEAU.

VORSICHT - LASERLICHT KLASSE 3R, WENN ABDECKUNG GEÖFFNET.

DIREKTE BESTRAHLUNG DER AUGEN VERMEIDEN.


CE and Ex protection type see type label MC 9090 ex RFID/LF/HF/UHF external



Issue 08/2010

Page 13 of 22

Appendix A



RFID


Warning laser

E

Type label



Licence sticker for the Windows Mobile ™ 5.0 Premium operating system

Label contains details on the Motorola device before it was modified by

BARTEC GmbH.

- CE mark and notified body used by Motorola





Important: You will need to quote the type number and serial number when making enquiries directly to the Technical Support department at

Motorola.


Page 14 of 22

Issue 08/2010

Appendix A


4 Commissioning


RFID

4.1 MC 9090

ex

Manual and Software for Windows Mobile from Motorola

Link: http://support.symbol.com/support/product/manuals.do

Mobile Computers

MC9090 WM

List of the available manuals and software downloads for the standard Motorola versions

4.2 MC 9090

ex

RFID Documentation from BARTEC

Use the following link to access the available documentation and downloads.

If you have any further questions, please contact us directly at [email protected]

.

Left German homepage: http://www.bartec.de/

Link to English homepage: http://www.bartec.de/index_eng.htm

4.3 MC 9090

ex

RFID Software

The software has been programmed as a demonstration program to test the devices.

The demonstration software has been written into Open Source so that every user with the development tools can view and use the structure.

The DLL files and the demonstration program are available on a password-protected page for download on request.

The password can be inquired from BARTEC at [email protected]

.


Issue 08/2010

Page 15 of 22

Appendix A


5 Additional Information


RFID

5.1 Order Numbers MC 9090

ex

(ATEX Zone 1)

Example: MC ex RFID/HF with 2-D imager engine and 53 keys without SD card.

Page 16 of 22


Issue 08/2010

Appendix A



RFID


ex

(UL Class I Division 1)

Example: MC ex K RFID/LF without scan engine, internal RFID/LF module,

28 keys and without SD card.


Issue 08/2010

Page 17 of 22

Appendix A



RFID


ex

(UL Class I, II, III Division 1)

Example: MC ex G RFID/UHF with long-range scan engine, external RFID/UHF module,

53 keys, without SD card.

Page 18 of 22


Issue 08/2010

Declaration of EC

Conformity


RFID


Issue 08/2010

Page 19 of 22


Conformity


RFID

Page 20 of 22


Issue 08/2010


Conformity


RFID


Issue 08/2010

Page 21 of 22


Conformity


RFID

Page 22 of 22


Issue 08/2010

BARTEC GmbH

Germany

Max-Eyth-Straße 16

97980 Bad Mergentheim

Phone: +49 7931 597-0

Fax:

+49 7931 597-119 [email protected]

www.bartec-group.com

Bartec | MC 9090ex-G | Mobile Computer Appendix A Supplement for User Manual

Mobile Computer

MC 9090

RFID/LF

MC 9090

RFID/HF

MC 9090

RFID/UHF

English

Appendix A

Supplement for User Manual

1 Product Description

2 Safety Instructions

2.1 Warnings about the Mobile Computers

2.2 Warnings for Use of Wireless Devices

2.3 Warnings for screen protection

3 Technical Data

3.1 RFID/LF Internal Module/only UL

3.2 RFID/LF External Module/ATEX and UL

3.3 RFID/HF External Module/ATEX and UL

3.4 RFID/UHF External Module/ATEX and UL

3.5 RFID/UHF External Module + External Antenna

3.6 Information on Applied Directives, Standards, Marking and In-Process

Inspections

4 Commissioning

4.1 MC 9090

Manual and Software for Windows Mobile from Motorola

4.2 MC 9090

RFID Documentation from BARTEC

4.3 MC 9090

RFID Software

5 Additional Information

5.1 Order Numbers MC 9090

(ATEX Zone 1)

5.2 Order Numbers MC 9090

(UL Class I Division 1)

5.3 Order Numbers MC 9090

(UL Class I, II, III Division 1)

Related manuals

Table of contents

Bartec | MC 9090ex-G | Mobile Computer Appendix A Supplement for User Manual

Mobile Computer

MC 9090

RFID/LF

MC 9090

RFID/HF

MC 9090

RFID/UHF

English

Appendix A

Supplement for User Manual

1 Product Description

2 Safety Instructions

2.1 Warnings about the Mobile Computers

2.2 Warnings for Use of Wireless Devices

2.3 Warnings for screen protection

3 Technical Data

3.1 RFID/LF Internal Module/only UL

3.2 RFID/LF External Module/ATEX and UL

3.3 RFID/HF External Module/ATEX and UL

3.4 RFID/UHF External Module/ATEX and UL

3.5 RFID/UHF External Module + External Antenna

3.6 Information on Applied Directives, Standards, Marking and In-Process

Inspections

4 Commissioning

4.1 MC 9090

Manual and Software for Windows Mobile from Motorola

4.2 MC 9090

RFID Documentation from BARTEC

4.3 MC 9090

RFID Software

5 Additional Information

5.1 Order Numbers MC 9090

(ATEX Zone 1)

5.2 Order Numbers MC 9090

(UL Class I Division 1)

5.3 Order Numbers MC 9090

(UL Class I, II, III Division 1)

Related manuals

MC 9090ex RFID / LF

TBURFID-UHF

MC 9090ex-G

Bartec

MC 9090ex-G

Bartec

MC 9090ex-G

Bartec

MC 9090ex-G

Bartec

MC 9090ex-G

Bartec

17-28BE-F006/0001

Bartec

Bartec

Bartec

Bartec

Table of contents