Bosch B5512 Owner`s manual

Intrusion Alarm Systems | B5512 Control Panel
B5512 Control Panel
The B5512 Control Panel integrates intrusion and
residential fire, providing one simple user interface for
both systems. The B5512 provides up to 48
individually identified points that can be split into 4
areas. The control panel includes a built-in Ethernet
port for IP network communications, and is
compatible with modules that send events to selected
public switched telephone network (PSTN), IP
network, or cellular network destinations through four
programmable route groups.
With the B5512, you can monitor doors, windows, and
motion within areas like showrooms or those that hold
inventory. Each user can have a personalized
passcode, a wireless keyfob, and a credential to
control the system.
Supports up to 48 points using a combination of
hardwired or wireless points for installation
flexibility and up to 4 areas with perimeter and
interior control
On-board Ethernet port for Conettix IP alarm
communication and remote programming,
compatible with modern IP networks including IPv6/
IPv4, Auto-IP, and Universal Plug and Play
Installer-friendly features including on-board USB
for easy on-site RPS programming, plus plug-in
PSTN and Cellular communication modules for
simple installation and future proof upgrades
Notifications with email and text messaging, and the
Remote Security Control app for Android and iOS
mobile devices
Programmable keypad shortcuts, situation sensitive
on-screen help, and a bilingual user interface make
system operation simple and easy
Use programmable authority levels with restricted
privileges to provide service, security, and cleaning
personnel with full or limited access. Use the three
programmable outputs (expandable up to 43) to turn
on lights or lock and unlock doors. Users can:
• Turn on the system to secure the stockroom while
you conduct daily business.
• Perform tests to ensure your system is working
• Set your system to alarm immediately if a door opens.
• Activate the Watch feature so a tone sounds
whenever a customer enters.
• Set a schedule for your system to automatically turn
on at closing time.
• Use wireless security options to customize your
2 | B5512 Control Panel
Central monitoring stations provide 24-hour system
monitoring with access to vital services. Professional
security personnel can test the system, monitor
system activity, and alert the police, fire department,
or other emergency response teams if necessary.
Programmable outputs
• 500 mA not to exceed 1.3 A total current for a
burglary system, or not to exceed 1.0 A total current
for household fire applications
• 800 mA auxiliary power at 12 VDC
• Four alarm-output patterns
• Programmable bell test
• Three programmable outputs; one high current using
a relay, and two trigger outputs
• Output A contact rating is 3 Amps
System response
• High-performance micro-controller provides industry
leading system response
• 20 custom point indexes
• Selectable point response time
• Cross point capability
• Fire alarm verification
• Dangerous gas indicator includes carbon monoxide
(NFPA 720)
• Watch mode
• Scheduled events (SKEDs) perform several functions,
such as turn on (arm) the system, turn off (disarm)
the system, bypass and unbypass points, and control
User interface
• Supervision of up to 8 keypads
• Custom keypad text is fully programmable through
• Full function menu including custom functions
• Authority by area and 32 character name for each
• 14 custom authority levels control user’s authority to
change, add, or delete passcodes to disarm or bypass
areas; and to start system tests
• Programmable primary and secondary language by
user and keypad; select from English, Spanish,
French, and Portuguese
Area configurations
Area programming offers a wide selection of different
system configurations. Make area arming conditional
on other areas (master or associate), if desired. You
can configure any area for perimeter and interior
arming, not requiring a separate area for this function.
Link multiple areas to a shared area which is
automatically controlled (hallway or lobby). For higher
security applications, the Area Re-Arm feature
guarantees that areas are always rearmed, and are
disarmed for no longer than a specific, configurable,
amount of time (for example, service time).
Custom functions
For added convenience, the installer can program
custom functions that allow customers to complete
complex tasks with one simple action. For example, a
custom function can bypass a group of points and arm
the system, allowing the user to perform these
functions with one easy command. Users can activate
custom functions with a keypad, keyfob, token, or
card, or the control panel can activate a function in
reaction to a faulted point, or automatically through a
scheduled event (SKED).
Passcode security
• Two-man rule. Requires two people with two unique
passcodes to be present at the time of opening.
• Early ambush. Allows users to verify that the facility is
safe by requiring two passcodes. The control panel
sends a duress event if the user does not enter the
passcode a second time after inspecting the
• Dual authentication. Requires two forms of
identification before processing certain system
commands, including turning off the system and
opening doors. A standard system user must have a
passcode, a credential (token or card), and
appropriate command authority permissions assigned
in the door and keypad’s assigned area.
Easy exit control
The control panel changes from one On (armed) state
to another without turning off (disarming) the system.
For example, if you change the state from Part On
(Perimeter Arm) to All On (Master Arm), the control
panel complies and reports the change. Easy Exit
Control reduces the number of keystrokes, simplifying
system operation.
Programmable passcode-controlled menu list
Passcode-controlled shortcuts provide users only with
the options and information pertinent to them,
simplifying system operation.
Flexible control
The system provides the flexibility to choose added
convenience or high security. For example, you can
restrict to a keypad's immediate local area turning on
(arming) and turning off (disarming) the system with a
passcode, even if the user has access to other areas.
This is particularly useful for high security areas,
where a user may have access to the area, but would
prefer to only turn off (disarm) the area individually
rather than with the rest of the system. Another option
is to program the system to turn off all areas the user
can access from any keypad.
Monitor Delay/Delayed Response
Create a special point index that delays the reaction of
a point for a specified time (up to 1 hour in minutes
and seconds). This delay provides time for the
specified condition to reset before activating any
annunciation. The system can annunciate locally and
send a report, if desired. When the system is armed,
3 | B5512 Control Panel
the point can respond like a normal point – providing
dual functionality. Use this feature to ensure that
perimeter doors have not been propped open, or to
monitor critical areas such as computer rooms and
safes, for example.
System users
The system supports up to 50 users. Each user can
have a personalized passcode, a wireless keyfob, and a
credential to control the system. User passcodes
contain three to six digits. You can assign passcodes
to one of 14 customized authority levels in each area
that can be restricted to operate only during certain
times. Programmable primary and secondary language
by user and keypad; select from English, Spanish,
French, and Portuguese.
Communication formats
The control panel prioritizes and sends reports to four
route groups. Network communication uses the
Modem4 communication format, whereas phone
communication uses Contact ID or Modem4
communications formats. Each group has a
programmable primary and backup destination.
The control panel provides flexible communications for
most central stations with reporting capabilities such
Individual point numbers
Opening or closing reports by user and area number
Remote programming attempts
Diagnostic reports
IP communication
The control panel uses on-board Ethernet (IP)
connection (the on-board Ethernet port is excluded on
“E” versions) to communicate with a Conettix D6600
or a Conettix D6100IPv6 Communications Receiver/
The control panel can optionally communicate with a
Conettix D6600 or a Conettix D6100IPv6
Communications Receiver/Gateway using a B426
Conettix Ethernet Communication Module or a
Conettix Plug-in Cellular Communicator (B440/B441/
Using Conettix IP communication offers a secure path
that includes anti-replay/anti-substitution features and
provides enhanced security with AES 256-bit
encryption (using Cipher Block Chaining (CBC)).
The control panel supports Domain Name System
(DNS) for both remote programming and central
station communication. DNS provides ease of use,
eliminating the need to use static IP addresses as your
reporting destination, and accommodates a simple
solution for central station disaster recovery. IP Setup
is available via the keypad Installer menu and the
remote programming software, eliminating the need to
use complicated internet programming tools such as
ARP and Telnet. The control panel supports both IPv6
and IPv4 networks.
For more information on the enhanced
communications capabilities, refer to RPS Help or the
control panel's Program Entry Guide.
Communication paths
The control panel accommodates up to four separate
phone and four separate network paths to the central
station receiver. When resetting alarms or turning a
system on and off, the user is identified by name and
Personal notification
The control panel can send text messages and emails
for personal notification over Ethernet or using a
cellular communicator. You can configure up to 16
destinations using a combination of cellular phone
numbers and email addresses. The control panel sends
notifications in the user’s programmed primary
Firmware updates
The system allows remote firmware updates through
Remote Programming Software (RPS) using the RPS
Firmware Update Wizard. The Firmware Update Wizard
uses the on-board USB connection or the on-board
Ethernet (IP) connection (the on-board Ethernet port
is excluded on “E” versions) to transmit firmware
The control panel can optionally receive firmware
updates from RPS using a B426 Conettix Ethernet
Communication Module or a Conettix Plug-in Cellular
Communicator (B440/B441/B442/B443). Notice!
Cellular firmware updates require more time than
Ethernet updates and carrier data rates apply.
• Control panel updates. Remotely update the control
panel firmware for easy feature enhancements
without replacing ROM chips.
• Module update support. Remotely update the
firmware on connected SDI2 modules for easy feature
enhancements without visiting each individual
A wide variety of input options
Each point:
• Accommodates normally‑open (NO) and
normally‑closed (NC) devices with end‑of‑line (EOL)
resistor supervision.
• Accepts programming for fire, gas, fire supervisory, or
intrusion applications.
• Supports hardwired and wireless devices.
• Supports IP cameras by Bosch as point sources.
Security and fire detection
The control panel provides eight on-board points, and
up to 40 additional off-board points (depending on
model and expansion interfaces). You can program
individual points to monitor some types of burglar
alarms, fire alarms, and supervision devices.
Event log
The event log stores local and reported events. The
event log includes information such as time, date,
event, area, point, and user. View the event log from a
4 | B5512 Control Panel
keypad or use RPS to remotely retrieve event
information. When the event log reaches a
programmed threshold of stored events, it can send an
optional report to a receiver.
The event log stores up to 255 local and reported
CAN/ULC S304 - Signal Receiving Centre and Premise
Alarm Control Units
Scheduled events (SKEDs)
The internal clock and calendar start individually
scheduled events (SKEDs). SKEDs perform functions
such as turn on or off, relay control, or point
The control panel offers:
ULC-ORD C1076 - Proprietary Burglar Alarm Units and
• Five scheduled events with up to 25 different
• Four opening windows and four closing windows
• Four user windows
• Day-of-week, date-of-month, or holiday only schedules
• One holiday schedule of 366 days (leap year)
Installers can perform limited programming on-site
with a keypad (critical parameters; such as account
IDs, central station and RPS IP addresses and phone
numbers, reporting formats, and more). They can also
do full programming on-site or remotely (attended or
unattended) with RPS. A programmable system
passcode prevents unauthorized remote programming.
Keypads and RPS offer diagnostic help for monitoring
and troubleshooting. The diagnostics features allow
you to view the status of the on-board Ethernet
connection, plug-in communicators, and SDI2 devices,
including inputs, outputs, and RF. The features provide
the status of the control panel and its connected
devices, such as firmware version, power, and missing
conditions. View the status of each area. Diagnostics
also include connection data for connected wireless
and Ethernet devices.
CAN/ULC S545, Residential Fire Warning System Control
ULC-ORD C1023 - Household Burglar Alarm System Units
CP-01-2010-Control Panel Standard - Features for False
Alarm Reduction
see our website
Installation/configuration notes
Compatible products
B942/B942W Touch Screen Keypad
B930 ATM Style Alphanumeric Keypad (SDI2)
B921C Two-line Capacitive Keypad
B920 Two-line Alphanumeric Keypad (SDI2)
B915 Basic Keypad
CX4010 Plug-in Transformer (18 VAC 22 VA 60 Hz)
ICP‑TR1822‑CAN Plug‑in Transformer (110 VAC primary, 18 VAC 22 VA
B10 Medium Control Panel Enclosure
B11 Small Control Panel Enclosure
Certifications and approvals
B12 Mounting Plate for D8103 Enclosure
D2203 Enclosure
UL 365 - Police Station Connected Burglar Alarm Units
and Systems
UL 609 - Local Burglar Alarm Units and Systems
UL 636 - Holdup Alarm Units and Systems
UL 985 - Household Fire Warning System Units
UL 1023 - Household Burglar Alarm System Units
UL 1076 - Proprietary Burglar Alarm Units and Systems
UL 1610 -Central Station Burglar Alarm Units
FCC Part 15 Class B
CP-01-2010-Control Panel Standard - Features for False
Alarm Reduction
CAN/ULC S303 - Local Burglar Alarm Units and Systems
D8103 Universal Enclosure (requires a B12)
D8108A Attack Resistant Enclosure (requires a B12)
D8109 Fire Enclosure (requires a B12)
B56 B56 Keypad Surface Mount Box
B96 Keypad Trim Bezel
B99 USB Direct Connect Cable
B501-10 Interconnect wiring cables (pack of 10)
D285/TH Photoelectric Smoke Detector Heads
5 | B5512 Control Panel
FCC-380 Carbon Monoxide Detector
RFDW-RM-A recessed mount door/window contact
Bosch conventional detectors, including Professional Series, Blue Line
Gen2, Blue Line, Classic Line, Commercial Line, and Ceiling Mount
motion detectors, as well as glass break, seismic, request-to-exit,
photoelectric, heat, and smoke detectors.
RFDW-SM-A surface mount door/window contact
RFKF-A two-button keyfob
B201 2-wire Powered Loop Module
RFKF-FB-A four-button keyfob
B208 Octo-input Module
RFKF-TB-A two-button keyfob
B308 Octo-output Module
RFPB-SB-A single-button panic
B426 Conettix Ethernet Communication Module
RFPB-TB-A two-button panic
B430 Plug-in Telephone Communicator
RFRP-A repeater
B440 Conettix Plug-in Cellular Communicator
RFSM-A smoke detector
B441 Conettix Plug-in Cellular Communicator
RFPR-12-A PIR motion detector
B442 Conettix Plug-in Cellular Communicator (Latin America)
RFPR-C12-A PIR curtain motion detector
B443 Conettix Plug-in Cellular Communicator (Canada)
RFUN-A universal transmitter
B450 Conettix Plug-in Communicator Interface
Inovonics Wireless
B520 Auxiliary Power Supply Module
B820 SDI2 Inovonics Interface Module
B810 wireless receiver (RADION)
B820 SDI2 Inovonics Interface Module
ENKIT-SDI2 SDI2 Inovonics Interface and Receiver Kit. Includes B820
and EN4200
D113 Battery Lead Supervision Module
EN1210 Universal Transmitter (Single-input)
D125B Dual Class B Initiating Module
EN1210EOL Universal Transmitter with EOL Resistor
D129 Class A Initiating Module
EN1210W Door-Window Transmitter with Reed Switch
D130 Auxiliary Relay Module
EN1215EOL Universal Transmitter with Wall Tamper, Reed Switch, and
EOL Resistor
D132A Smoke Detector Reversing Relay Module
D133/D134 Relay Module
D185 Reverse Polarity Signaling Module
D192G Class “B”, Style Y Bell Circuit Supervision
RFGB-A glass break detector
RFIN-A inertia detector
EN1223D Water‑resistant Pendant Transmitter (Double‑button)
EN1223S Water‑resistant Pendant Transmitter (Single‑button)
EN1224-ON Multiple-Condition Pendant Transmitter
EN1233D Necklace Pendant Transmitter (Double-button)
EN1233S Necklace Pendant Transmitter (Single-button)
Remote Programming Software (RPS or RPS‑LITE) v5.17 or higher
EN1235D Beltclip Pendant Transmitter (Double-button)
Conettix receivers
(Managed and configured with Conettix D6200 Programming/
Administration Software v2.00)
Conettix D6600 Communications Receiver/Gateway (with only D6641
line cards installed) with CPU version 01.10.00
Conettix D6100IPv6 Communications Receiver/Gateway with CPU
version 61.10.00
Conettix D6100i Communications Receiver/Gateway with CPU version
RADION wireless from Bosch
B810 wireless receiver (RADION)
RFBT-A bill trap
RFDL-11-A TriTech motion detector
EN1235DF Fixed-location Transmitter (Double-button)
EN1235S Beltclip Pendant Transmitter (Single-button)
EN1235SF Fixed-location Transmitter (Single-button)
EN1247 Glass-break Detector Transmitter
EN1249 Bill Trap Transmitter
EN1242 Smoke Detector Transmitter
EN1260 Wall Mount Motion Detector
EN1261HT High Traffic Motion Detector
EN1262 Motion Detector with Pet Immunity
EN1265 360° Ceiling Mount Motion Detector
6 | B5512 Control Panel
EN4200 Serial Receiver
RF points
EN5040-T High Power Repeater with Transformer
Parts included
Power Requirements
The B5512 includes the following:
Current draw (maximum)
Idle 125 mA; Alarm 155 mA
Output (alarm)
1.3 A at 12 VDC
B5512 board
800 mA at 12 VDC nominal
Literature pack
• UL Installation Instructions
• Owner’s Manual
• Release Notes
• SIA Quick Reference Guide
Output (auxiliary, continuous
power, and switched auxiliary
Voltage (operating):
12 VDC nominal
Voltage (AC)
CX4010 Plug-in Transformer (18
VAC 22 VA 60 Hz) or
ICP‑TR1822‑CAN Plug‑in
Transformer (110 VAC primary,
18 VAC 22 VA secondary)
Literature CD containing product literature
The B5512E is available only in kits. Refer to Ordering
Each B5512E control panel kit includes the following:
*The “E” control panels do not include an on-board
Ethernet connector.
B5512E board (without on-board Ethernet port)
Plug-in communicator (telephone or cellular, depending on
the kit)
Plug-in Transformer (18 VAC 22 VA 60 Hz)
Ordering information
Control panel enclosure (kit dependent)
Literature pack
• UL Installation Guide
• Owner’s Manual
• Release Notes
• SIA Quick Reference Guide
The B5512 is available individually or in kits. The
B5512E is available only in kits.
For kits, refer to Special (B Series Kits) on the
Documents tab of the control panel’s Product Page at
Literature CD containing product literature
Technical specifications
One on-board Ethernet connector*
Environmental considerations
Relative humidity
5% to 93% at +90℉ (+32℃),
Temperature (operating)
+32°F to +122°F (0°C to +49°C)
Number of…
Custom functions
Up to 255
Passcode users
50, plus 1 Installer passcode
48 (8 on‑board, up to 40
Programmable outputs
43 (3 on‑board, up to 40
All hardware and software product names used in this
document are likely to be registered trademarks and
must be treated accordingly.
Order number B5512
7 | B5512 Control Panel
Represented by:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
© Bosch Security Systems 2015 | Data subject to change without notice
6085453963 | en, V21, 23. Feb 2015
Robert Bosch (SEA) Pte Ltd, Security
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
203 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398