Q-See QSDR4420RC User manual
Add to my manualsadvertisement
◉
Touch to zoom
Quick Installation Guide 4 Channel H.264 Compression DVR with (CIF) Real-Time Recording and 4 Color CMOS Camera Kits MODEL QSDR4420RC Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC PART 1 - PACKAGE CONTENTS: QSDR04RTC DVR Power Supply for DVR Software CD 4 - Color CMOS Cameras (QSM2018) Pre-Installed Hard Drive User’s Manual Power Supply & 4 -Way Splitter For Cameras Camera Cables (4 Included) BNC (M) – RCA (F) Adapters (2 Included) Ethernet Cable USB 2.0 Mouse Remote Control 1|Page Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC PART 2 - DVR CAMERA AND POWER CONNECTIONS (Figure 1) 1. Connect one end of the 60 Ft. extension cables to the cables that are connected to the cameras (not shown). 2. Connect the other end of the 60 Ft. extension cable to the DVR as illustrated in Figure 1. 3. Following the illustration in Figure 1, plug the power connecter of the 60 Ft. extension cable to the 4 way splitter. Repeat steps 1 through 3 for each camera. 4. Plug the end of the camera power adapter into the 4 way splitter. 5. Plug the power adapter into the surge protector. 6. Plug the power adapter for the DVR into the back of the DVR as illustrated in Figure 1. 7. Plug the power chord of the power adapter into the surge protector. 8. Plug the surge protector in to an electricity outlet. 2|Page Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC PART 4 - CONNECTING THE DVR TO YOUR TV 1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR. 2. Connect the other end of the RCA cable to the Video Input on the TV if you are using a television screen. 3. If you are using a PC monitor, plug the VGA cable (not included) to the VGA port on the DVR. 4. Connect the other end of the VGA cable to the monitor. PART 5 - DVR CONTROLS: FRONT PANEL 1. 2. 3. 4. 5. 6. HDD Indicator Power Indicator IR Receiver Channel Selector Quad Mode Reverse 7. Pause 8. Play 9. Forward 10. Stop 11. Record 12. Menu/Escape 3|Page 13. Move Up 14. Select/Edit 15. Move Down 16. PTZ Mode 17. USB 2.0 Port Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC PART 6 - ACCESSING THE DVR MENUS Choose MENU by right clicking on the mouse or by pushing the MENU button on the DVR front panel or remote control. The Main Menu offers the following Setup Features: CAMERA: Setup name display, position, image view, and record quality of each channel (cameras). RECORD: Enable recording & audio, set resolution & quality, recording mode and file size. NETWORK: Setup Network access (Remote Internet Monitoring). SEARCH: Find files for playback and backup. DEVICES: Manage & Format hard drive and USB devices, setup alarms, PTZ cameras, mobile phone access and motion detection. SYSTEM: Setup time, date, password, and video mode. PART 7 - SETTING UP CAMERAS FOR VIEWING AND RECORDING From the Main menu, select CAMERA. Here you can setup the name display (up to 8 characters) and position of each channel (cameras). Select COLOR SETUP to adjust the image brightness, saturation, contrast and hue settings for each channel (camera). You can also choose whether each channel can be previewed in LIVE MODE and/or RECORDING MODE. PART 8 - TO START RECORDING This System offers 3 modes for recording: 1. Manual 2. Time Schedule 3. Motion Detection. From the main menu, select RECORD to enter into the Record Setup menu (shown at right). CHANNEL: “ON” enables video to record from the respective camera. If the channel is set to “OFF”, video from that channel will not record. RESOLUTION: D1=704x480, HD1=704x240, CIF=352x240 QUALITY: Best, Good, Normal Using higher resolution and quality settings results in better video quality, but takes up more space on the hard drive. Choosing lower settings result in lower video quality, but takes up less space on the hard drive. AUDIO: If audio is ENABLED sound will be recorded with the video from the channels, and will have audio output in playback mode. If audio is DISABLED, sound will not record, and there will be no audio output in playback mode (Audio cameras or a microphone is required to record the sound). REC MODE: Sets DVR to record on Manual, Motion Detection, and Time Schedule Recording (detailed instructions below). PACK TIME: Choose the time length of all recorded files: 15, 30, 45, 60 min. (Max = 60 min) 4|Page Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC Grid Explanation: Red = Alarm (motion detection) recording Green = General (time schedule) recording Transparent = No recording Blue = The channel and date selected. Manual Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected. Time Schedule Recording: From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (see below image). Select the channels (cameras) that you wish to record on a schedule. The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be “Grey. Click on the green GENERAL option box then click on the boxes for the days and times that you want to record using this option on the timeline. You can use the [From – To] pull-down menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on it’s Time Schedule, and separate files with the Pack Time Interval you selected. Click APPLY to activate your customized schedule, and then reboot the DVR. You can also click on the DEFAULT button to use the system defaults. The system default settings are: Hr 01:00 am-07:59 am : No recording Hr 08:00 am-18:59 pm : General recording (Time Schedule) Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection) Motion Detection Recording: From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (See picture above). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be “Grey. Click on the red ALARM option box then click on the boxes for the days and times that you want to record using this option on the timeline. You can use the [From – To] pull-down menus and COPY button to copy settings from one day to another day, or all days. Your DVR will record on Motion Detection. Click APPLY to activate your customized schedule, and then go to the Devices option (red box in first below picture) and select the Motion Option (red box in second picture below), which will display the Motion Detect Box. 5|Page Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC The Motion detection Menu has three sections, including Channel Status, Sensitivity and Motion area. STATUS: This option allows you enable motion detection on any channel. SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 4, with 4 being the highest. Next, click on the MD AREA SETUP button, which will display the picture on the left. This option allows you to select the area you want to be sensitive to motion. The area in red is sensitive to motion. You can set this area by using the mouse or REV, FWD, and SEL keys on the front panel. Once you have set the area, right click with the mouse or push the ESC key to save the setting. After you have set all of the cameras, click on the Apply button to save the settings. PART 9 - SETTING UP THE DVR TO PLAYBACK Searched Playback: From the Main Menu select SEARCH to display the Video Search Menu shown to the right. If you input a specific date and click Search, you will find all the recordings for that day. When you select an item, you will playback the recordings in 4 channel mode; or, click [File list] button to display File list interface, where you can playback or backup the file you selected. See File List heading below. In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow play at 1/2x, 1/4x, and 1/8x, or normal play, pause and play frame by frame using the playback control bar, and adjust volume by clicking or sliding tune control bar. When playback has finished, system will return to previous menu. File List: On the Video search menu mode, click File list to display the submenu shown in the picture on the left. This option will allow you to view all of the available files by channel and type (all, normal, or alarm). You can select a file and push the SEL button to playback the file, or use the FWD button and down button to select the backup option and backup the recorded file you selected. You can also put a checkmark in the BAK box at the end of multiple files if you want to backup more than one file. See section 5.2.4 Search Recordings in the User Manual for more information on using the File List option. 6|Page Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC PART 10 - BACKING UP THE VIDEO ON THE DVR Attach a USB flash drive or USB hard drive to the USB backup port and follow the instructions in Part 8 to go to the File List in the Search menu. If you want to backup a single recorded file from the file list, from the File List dialog box pictured above, select the file you wish to back up by placing a check mark in the accompanying green box and hit the [BACKUP] button on the right of the screen. You will then receive a pop up screen as illustrated in Picture 22 showing you the progression of your backup. Once backup is complete, you will then receive a pop up message informing you that you have backed up your files successfully (see picture below). Note that all files will be in an H264 format that can be converted to AVI using the Multi Player program that comes with the DVR or through the net-viewer program. Once converted, you can then view these files through any program that supports an AVI format. 7|Page Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QSDR4420RC Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: [email protected] Live Chat from our Website Website: Tech Support: http://www.q-see.com Fax: 714-998-3509 Phone: 877-998-3440 x 539 Email: [email protected] Live Chat from our Website REVISED 1/11/2010 8|Page
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project