Yamaha C750 - DVD Changer Owner`s manual

.YAMAHA
DVD PLAYER
LECTEUR DE DVD
DVD-S550
OWNER'S MANUAL
MODE D'EMPLOI
.YAMAHA
NATUFlAL SaUNa ova PLAYEFl
1M? illJD~@
V IDE 0
( DIGITAL VIDEO)
IMPORTANT SAFETY INSTRUCTIONS
12
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER·SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
13
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated "dangerous
voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
Read Instructions - All the safety and operating
instructions should be read before the product is operated.
Retain Instructions - The safety and operating instructions
should be retained for future reference.
Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
4 Follow Instructions - All operating and use instructions
should be followed.
Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
Water and Moisture - Do not use this product near water
- for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the product.
Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
A product and cart combination should be
9
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10 Ventilation - Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
11 Power Sources - This product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company.
For products intended to operate from battery power, or other sources, refer to the operating instructions.
14
15
16
17
18
19
20
21
22
23
Grounding or Polarization - This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry ~ Never push objects of any kind
into this product through openings as they may touch dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
product.
Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) Ifliquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any
way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting - The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC,.to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class
"8" digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning
the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic
Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
,
B
0'
I
I:
We
Wcn!Yau
~1~3:~!NG
For Customer Use:
.
~
, CLASS 1 LASER PRODUCT
I LASER KLASSE 1 PRODUKT
i LUOKAN 1 LASERLAITE
I KLASS 1 LASER APPARAT
I PRODUIT LASER DE CLASSE 1
.
~
..
-.~=_.,.
L]
.
I
~
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM
DANGER: INVISIBLE LASER RADIATION WHEN OPEN
AVOID DIRECT EXPOSURE TO THE BEAM
Read carefully the information located at the bottom of the
player (U.S.A. model) and enter below the Serial No. Retain
this information for future reference.
Model No.
Serial No.
_
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
Radio Interference Regulations of the Canadian Department
of Communications.
POUR LES CONSOMMATEURS CANADIENS
Pour eviter les chocs electriques, introduire la lame la plus
large de la fiche dans la borne correspondante de la prise et
pousser jusqu'au fond.
Cet appareil numerique de la classe Best conforme a la
norme NMB-003 du Canada.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
2
3
4
5
6
7
S
9
10
11
12
13
iii
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
Install this sound system in a well ventilated, cool,
dry, clean place - away from direct sunlight, heat
sources, vibration, dust, moisture, or cold. In a
cabinet, allow about 2.5cm (1 inch) of free space
all around this unit for adequate ventilation.
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
Avoid installing this unit in a location where
foreign objects may fall onto this unit or where
this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
- Other components, as they may cause damage
and/or discoloration on the surface of this unit.
- Burning objects (i.e., candles), as they may
cause fire, damage to this unit, and/or personal
injury.
- Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside thiS unit
rises, it may cause fire, damage to this unit and/or
personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
Do not use excessive force on switches, knobs
and/or cords.
When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
Use only the voltage speofied on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this
unit, and/or personal inJUry. YAMAHA will not be
held responsible for any damage resulting from
use of this unit with a voltage other than as
specified.
To prevent damage by lightning, disconnect the
power cord from the wall outlet dUring an
electrical storm.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
15 When not planning to use this unit for long
periods oHime (i.e., vacation), disconnect the AC
power plug from the wall outlet.
16 Be sure to read the "TROUBLESHOOTING"
section on common operating errors before
concluding that this unit is faulty.
17 Before moving this unit press STANDBY/ON to
set the unit in standby mode, then disconnect the
AC power plug from the wall outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
When playing DTS encoded CDs, excessive noise will
be heard from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer
should take proper precautions when the analog
stereo outputs of the player are connected to an
amplification system. To enJoy DTS Digital
Surround™ playback, an external 5.1-channel DTS
Digital Surround™ decoder system must be
connected to the digital output of the player.
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE TO BEAM
(WARNING LOCATION: INSIDE ON LASER
COVERSHIELD OR THE BACKPLATE OF SET)
LASER
Type
Wave length
Output Power
Beam divergence
Semiconductor laser GaAIAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (YCD/CD)
60 degree
DANGER
This unit emits VISible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged Into a wall outlet, do not
place your eyes close to the opening of the disc tray
and other openings or look Inside.
Contents
Special YCD & SVCD Features
Introduction
Region Codes
Supplied accessories
2
~
2
Notes about discs
2
Cleaning discs
2
Patent information
2
Functional Overview
Front and Rear Panels
3
Remote Control
4
Preparation
Playback Control (PBC)
Preview Function
Playing MP3/DivXlJPEG/Kodak Picture CD
General Operation
Selecting a folder and track/file
Repeat and Shuffle
Special picture disc features
Preview Function GPEG)
Zoom picture
Playback with multi-angles
Scan Effect
Playing MP3 music and JPEG picture
simultaneously
General Notes on connections
5
Digital Connections
5
Analog Connections
5
Setup Menu
Video Connections
6
General Setup menu
S-Video terminal <A>
Composite Video terminal <B>
Component Video terminal <C>
6
6
6
Getting Started
Inserting batteries into the Remote Control
Using the remote control
Turning on the power
Selecting the color system that corresponds
to your TV
Setting language preference
Setting the OSD Language
Setting the Audio, Subtitle and Disc menu
language
7
7
7
7
8
8
9
Disc Operations
Basic Playback
10
General Operation
10
Pausing playback
Selecting track/chapter
Searching backward/forward
Stopping playback
Selecting various repeat/shuffle functions
Repeat and Shuffle
Repeating a section within a chapter/track
Operations for video playback (DYDNCD/SYCD)
Using the Disc Menu
Zoo,ming in
Resuming playback from the last stopped point.
On-Screen Display (OSD)
Special DVD Features
Playing a Title
Camera Angle
Audio
Subtitles
10
10
10
10
11
11
11
.. 11
11
11
11
12
13
13
13
13
13
Locking/Unlocking the disc for viewing
Dimming player's front panel display
Programming disc tracks (not for Picture CD/
MP3)
;
OSD Language
Screen Saver
Sleep Timer
DivX® VOD registration code
Audio Setup Menu
Setting the Analog output..
Setting the Digital output..
CD Upsampling
Night Mode
Video Setup Menu
TV Type
Setting the TV Display
Progressive
Picture Setting
Selecting the black level (U.S.A. model only)
Closed Caption (U.s.A model only)
Preference Setup Menu
Audio, Subtitle, Disc Menu
Restricting playback by Parental Control
PBC (Playback Control)
MP3/JPEG Menu
Changing the Password
Restoring to original settings
13
13
13
14
14
15
15
15
15
16
16
16
16
17
17
17
17
18
18
18
19
19
19
20
20
21
21
21
21
22
22
23
23
24
24
24
24
25
25
25
Language Code
26
Troubleshooting
28
Glossary
30
Specifications
31
Introduction
Thank you for purchasing this unit. This
Owner's Manual explains the basic
operation of this unit.
DVD discs must be labeled for
ALL regions, Region 1 (U.S.A
model) or Region 4 (Australia
model) in order to play on this
Player. You cannot play Discs
that are labeled for other regions.
-
-
Remote control
Batteries (two AA size) for remote
control
AudioNideo cable
Owner's Manual
This unit is designed for use with DVD
video, Video CD, Super video CD, Audio CD,
CD-R, CD-RW, DVD+RW, DVD+R, DVD-R
and DVD-RW.
This unit can play:
MP3, picture (Kodak, jPEG) files on CDR(W).
- jPEGIISO 9660 format
- Maximum 30 characters display.
DivX® disc on CD-R[W]/DVD+R[W]/
DVD-R[WJ (3. 11, 4.x and S.x)
CD-R and CD-RW cannot be played unless
finalized.
Some discs cannot be played depending on
the recording conditions such as PC
environment and application software. The
characteristics and condition of the discs;
materials, scratches, curvature, and etc.,
may result in failure.
Be sure to use only CD-R and CD-RW discs
made by reliable manufacturers.
- Do not use any non standard shaped discs
(heart, etc.)
Do not use disc with tape, scals, or paste on
it, damage to the unit may result.
2
Do not use a disc printed on its surface by
a commercially available label printer.
• When a disc becomes dirty, clean it
with a cleaning cloth. Wipe the disc
from the centre out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine,
thinner, commercially available cleaners,
or antistatic spray intended for analog
records.
[]OIDOLBVI
DIGITAL
DIGITAL OUT
-
~
8
Manufactured under license from
Dolby Laboratories. "Dolby" and
the double-D symbol are
trademarks of Dolby
Laboratories.
"DTS" and "DTS Digital Out" are
trademarks of Digital Theater
Systems, Inc.
DivX, DivX Certified, and
associated logos are trademarks
of DivXNetworks, Inc and are
used under license.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.s. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Functional Overview
STANDBY/ON
- turns on this unit or sets it to the
standby mode
Disc tray
~ OPEN/CLOSE
- opens or closes the disc tray
PROGRESSIVE indicator
-lights up when the unit enters
Progressive mode
• STOP
- stops playback
II PAUSE
- pauses playback
~PLAY
- starts playback
Front panel display
- shows information about the
operational status of the unit
* Press button for about two seconds.
.A C Power Cord
- connects to a standard AC outlet
COAXIAL digital audio output
- connects to a digital (coaxial) input of
your AV receiver or stereo system
OPTICAL digital audio output
- connects to a digital (optical) input of
your AV receiver or stereo system
VIDEO output
(composite video out)
- connects to a video input on your AV
receiver
AUDIO OUT (Left/Right)
- connect to AUDIO inputs
of your AV receiver
or stereo system
COMPONENT video outputs
- connect to an AV receiver with Y
PB PR inputs
S VIDEO output
- connects to an $- Video input on
your AV receiver
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
3
Functional Overview
TOP MENU/RETURN
- display the top-level disc menu
(DVD) / go back to previous
menu (VCD)
MENU
- access menu of a disc (DVD) /
switch PBC on/off (VCD)
....
~AT
- (Ieft/right/up/down) select an
item in the menu
ENTER/OK
- acknowledge menu selection
~
- search backward* / go to a
previous chapter or track
STOP ( . )
- stop playback
PLAY (~)
- start playback
PAUSE (II)
- pause playback temporarily /
frame-by-frame playback
REPEAT
- repeat chapter, track, title, disc
/ shuffle chapter, track
A-B
- repeat a specific segment
SCAN
- preview the content of a track
or whole disc (VCD) / play the
first 6 seconds or less of each
track (CD)
MUTE
- disable or enable sound output
* Press and hold button for about two seconds.
4
<!)II
J - -............- - - - l -
turn this unit ON or go to
standby-on mode
0-9 numeric keypad
- select numbered items in a
menu
ON SCREEN
- access or remove player's On
Screen Display menu
SETUP
- access or remove player's
setup menu
~
- search forward* / next chapter
or track
SUBTITLE
- subtitle language selector
ANGLE
- select DVD camera angle
ZOOM
- enlarge video image
AUDIO
- audio language and format
selector
Preparation
Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
drawings.
• Please refer to the manuals of other
equipment as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit's audio out
jack to the phono in jack of your audio
system.
Note:
- If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure to select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
Use audio/video cable supplied with this
unit to connect AUDIO OUT L (left) and
R (right) jacks of this unit to corresponding
input jacks of your audio equipment such
as Stereo amplifier.
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using each specific cable (separate
purchase).
You will need to set this unit's digital
output to ALL (see page 20
"DIGITAL OUTPUT").
5
Preparation
S-Video terminal <A>
If your AV receiver has video output jacks,
connect your receiver (and then to your
TV) so that you can use one TV for several
different video sources (LD, VCR etc.) by
simply switching the input source selector
of your receiver.
The player has three types of video output
jacks. Use one of them in accordance with
the input jacks of the equipment to be
connected.
S (separate) video connection achieves a
clearer picture than composite video
connection by separating color and
luminance when transmitting signals. Use
commercially available S-video cable.
Receiver (and TV) with S-video input is
required.
Composite Video terminal <8>
Use audio/video cable supplied with this
unit when connecting the player to a TV.
Component Video terminal <C>
Component video connection achieves
high fidelity in reproducing colors (better
performance than S-video connection),
separating video signal into luminance (Y,
terminal color-coded as green), and color
difference (Pb, blue/Pr, red). Use
commercially available coaxial cables.
Receiver (and TV) with component input is
required. Observe the color of each jack
when connecting. If your receiver does not
have component output jacks, connecting
the player's component output directly to
your TV's component input can reproduce
better video image.
6
Getting Started
Connect the AC power cord to the power
outlet.
2 Turn on the TV and your AV receiver.
3 Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner's
manual for detail.
4 Turn this unit on.
1 Open the battery compartment.
2
Insert two batteries type R06 or AA,
following the indications (+ -) inside the
compartment.
3
Close the cover.
S Set the TV to the correct Video IN
channel. (eg. EXT1, EXT2, AV1, AV2,
AUDIONIDEO, etc. Refer to your TV
owner's manual for detail)
... The front display lights up and the
default screen appears on the TV.
Using the remote control
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
~
g~i
000
0000
0000
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
high humidity such as near a bath
high temperature such as near a heater
or stove
extremely low temperature
dusty places
1
Press SETUP.
2
Press ~ repeatedly to select {VIDEO
SETUP PAGE}.
3
Press ...T to highlight {TV TYPE}, then
press ~.
7
Getting Started
4
Press .... to highlight one of the options
below:
PAL
Select this if the connected TV is PAL
system. It will change the video signal of a
NTSC disc and output in PAL format.
You can select your own· preferred
language settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default language will be used
instead. The OSD language in the system
menu, will remain once selected.
NTSC
Select this if the connected TV is NTSC
system. It will change the video signal of a
PAL disc and output in NTSC format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Setting the OSDLanguage
S Select an item and press ENTER/OK.
Helpful Hint:
- Before changing the current TV
Standard setting, ensure that your TV
supports the ~se/ected TV Type'
system.
- I(there is not proper picture on your
TV, wait (or 15 seconds (or auto
recover.
8
(U.S.A. model)
1
Press SETUP.
2
Press ....
PAGE}.
3
Press .... to highlight {OSD LANGUAGE},
then press ~.
4
Press .... to select a language and press
ENTER/OK.
~
to select {GENERAL SETUP
Getting Started
Setting the Audio, Subtitle and
Disc menu language
1 Press STOP. twice, then press SETUP.
2
Press ~ repeatedly to select
{PREFERENCE PAGE}.
3 Press.T to highlight one of the options
below at a time, then press ~.
- 'Audio' (disc's soundtrack)
- 'Subtitle' (disc's subtitles)
- 'Disc Menu' (disc's menu)
4
Press.T to select a language and press
ENTER/OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code (see page 26 "Language Code") and
press ENTER/OK.
S Repeat steps 3-4 for other language
settings.
9
Disc Operations
IMPORTANT!
- If the inhibit icon (0 or X) appears
on the TV screen when a button is
pressed, it means the function is
not available on the current disc or
at the current time.
Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
Do not push on the disc tray or put
any objects other than disc on the
disc tray. Doing so may cause the
disc player malfunction.
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
During playback, press PAUSE II.
-. Playback will pause and sound will be
muted.
2 Press PAUSE II again to select the next
picture frame.
3
To resume normal playback, press
PLAY~.
Press STANDBY/ON on the front panel
to turn on the DVD player.
2 Press OPEN/CLOSE
~
on the front
panel to open disc loading tray.
3
Place the chosen disc in the tray, with the
label facing up.
~ again to close
the tray.
-. After recognizing this disc, the player
begin to playback automatically.
-. If you press PLAY ~ when the tray is
open, this unit closes the tray and starts
playback.
4 Press OPEN/CLOSE
Selecting track/chapter
• Press ~ / ~ or use the numeric
keypad (O-9) to key in a track/chapter
number.
-. If repeat mode is active, pressing ~ /
~ will replay the same track/chapter.
Searching backward/forward
• Press and hold ~ / ~, then press
PLAY ~ to resume normal playback.
-. While searching, pressing ~ / ~
again will decrease/increase the search
speed.
Stopping playback
• Press STOP •.
10
Disc Operations
Repeat and Shuffle
Using the Disc Menu
• While playing a disc, press REPEAT
continuously to choose a 'Play Mode'.
Depending on the disc, a menu may appear
on the TV screen once you load in the disc.
DVD
To select a playback feature or item
• Use .... ~..T or numeric keypad
~
~
~
~
~
RPT ONE (repeat chapter)
RPT TT (repeat title)
SHUFFLE (shuffle)
RPT SHF (shuffle repeat)
RPT OFF (repeat off)
(0-9) on the remote, then press
ENTER/OK to start playback.
To access or remove the menu
VCD/SVCD/CD
~ RPT ONE (repeat track)
~ RPT ALL (repeat disc)
~ SHUFFLE (shuffle)
~ RPT SHF (shuffle repeat)
~ RPT OFF (repeat off)
• Press MENU on the remote.
Zooming in
This function allows you to enlarge the
pictu re on the TV screen and to pan
through the enlarged picture.
MP3/DivX
~ RPT ONE (repeat track)
~ RPT FLD (repeat folder)
~ SHUFFLE (random play)
~ RPT OFF (repeat off)
Helpful Hint:
- For VCD, repeat playback is not possible if
the PBC mode is switched on.
Repeating a section within a
chapter/track
While playing a disc, press A-B at your
chosen starting point.
2
Press A-B again at your chosen end point.
The section A and B can be set only
within the same chapter/track.
~ The section will now repeat
continuously.
~
3 To exit the sequence, press A-B.
During playback, press ZOOM repeatedly
to display the picture with different scales.
~ Use .... ~ ..T to pan through the
enlarged picture.
-+ Playback will continue.
2
Press ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
Resume playback of the last 10 discs is
possible, even if the disc was ejected or the
power switched off.
• Load one of the last 10 discs.
~ "LOADING" appears.
• Press PLAY ~ and the disc will be
played back from the last point.
To cancel resume mode
• In stop mode, press STOP. again.
11
Disc Operations
Time Search (DVDNCD)
On-Screen Display (OSD)
Press ...... to select {TT TIME} or {CH
TIME} (DYD) or {TRACK TIME} or {DISC
TIME} (YCD).
~ {TT TIME} refers to the total time of the
current title, and the {CH TIME} refers
to the total time of the current chapter.
OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
During playback, press ON SCREEN.
A list of available disc information
appears on the TY screen.
~
2
Press ENTER/OK.
3
Enter hours, minutes and seconds from left
to right using the numeric buttons. (e.g.
0:34:27)
DVD
Audio/Subtitle/Angle (DVD)
You can change {AUDIO}, {SUBTITLE} or
{ANGLE} if available on the disc you are
playing.
Press ...... to select {AUDIO}, {SUBTITLE}
or {ANGLE}.
VCD/SVCD
2
Press ENTER/OK.
3
For Audio and Subtitle,
Press'"... to highlight your selection and
press ENTER/OK.
or
For Angle,
Select an angle using the numeric buttons.
Repeat/Time Display (DVDNCD)
2
Press ...... to view the information and
press ENTER/OK to access.
3
Use the numeric keypad (0-9) to input
the number/time or press ~T to make the
selection, then press ENTER/OK to
confirm.
~ Playback will change to the chosen time
or to the selected title/chapter/track.
Title/Chapter/Track selection (DVD/
VCD)
Press ...... to select {TITLE} or
{CHAPTER} (DYD) or {TRACK} (YCD).
2
Press ENTER/OK.
3
Select a title, chapter or track number
using the numeric buttons.
12
Press ...... to select {REPEAT} or {TIME
DISP.}.
2
Press ENTER/OK.
3
Press ...... to highlight your selection and
press ENTER/OK.
Time display (CD)
Each time you press ON SCREEN, the
time display changes as follows;
[
Total Elapsed
~ Total Remain
Single Remain ••- - - Single Elapsed
J
Disc Operations
Playing a Title
Playback Control (PBC)
Press MENU.
disc title menu appears on the TV
screen.
For VCD with Playback Control
(PBC) feature (version 2.0 only)
~ The
• Press MENU to toggle between 'PBC
ON' and 'PBC OFF'.
~ If you select 'PBC ON', the disc menu (if
available) will appear on the TV.
~ Use the ~ I ~ or the numeric
keypad (0-9) to select a play option.
• During playback, pressing TOP
MENU/RETURN will return to the
menu screen (if PBC is on).
2 Use .... ~... or numeric keypad (0-9)
to select a play option.
3
Press ENTER/OK to confirm.
Camera Angle
• Press ANGLE repeatedly to select
different desired angle.
If you want to skip the index menu
and playback directly from the
beginning,
Audio
Changing the Audio Language and/or
format
• Press MENU on the remote control to
switch to PBC off.
• Press AUDIO repeatedly to select
different audio languages.
Preview Function
Subtitles
1
Press SCAN.
• Press SUBTITLE repeatedly to select
different subtitle languages.
2
Press ... to highlight {TRACK DIGEST},
{DISC INTERVAL} or {TRACK
INTERVAL}.
3
Press ENTER/OK to open one option.
Note:
- You can select {TRACK INTERVAL} only
during playback, with PBC Off.
13
Disc Operations
TRACK DIGEST
This function will minimize the picture of
every track in order to display every six of
these tracks on the screen to help you
know the content of every track on the
disc.
General Operation
Load a disc.
The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
~ The data disc menu appears on the TV
screen.
DISC INTERVAL
This function is used to divide a disc into
six parts by regular intervals and display
them on one page to preview the whole
disc.
TRACK INTERVAL
This function is used to divide a single track
into six parts by regular intervals and
display them on one page to help you
preview the selected track.
~
2
Playback will start automatically. If not
press PLAY~.
OQ:OO 00:00
@
0011020
_.... IIIIIIIIIII-~
(example for 6 thumbnail pictures display)
4
Use ~ ~.... to select a track or use
numeric keypad (0-9) to input the
selected track number next to {SELECT}.
5
Press ~ / ~ to open the previous or
next page.
6
Press ENTER/OK to confirm.
To quit preview function
• Use ~ ~.... to highlight {EXIT} and
press ENTER/OK to confirm.
To return to preview menu
• Use ~ ~.... to highlight {MENU} and
press ENTER/OK to confirm.
For CD
• At stop mode, press SCAN on the
remote control.
~ Each track will be played for a few
seconds.
14
During playback, you can;
• Press ~ / ~ to select another
track/file in the current folder.
• Press II to pause playback.
Helpful Hint:
- It may not be possible to play certain MP3/
JPEG/DivX disc due to the configuration
and characteristics of the disc or condition
of the recording.
Disc Operations
Selecting a folder and track/file
Press ....... to select the folder and press
ENTER/OK to open the folder.
2
3
Load a Picture disc (Kodak Picture CD,
JPEG).
~ For Kodak disc, the slide show will
begin.
~ For JPEG disc, the picture menu appears
on the TV screen.
Press ....... to select a track/file.
Press ENTER/OK to confirm.
Playback will start from the selected file
to the end of the folder.
~
2
Repeat and Shuffle
When the Picture CD/MP3 CD menu is
shown on the screen;
• Press REPEAT continuously to access
different 'Play Mode'.
~ FOLDER: files will be played back once.
~ REPEAT ONE: one file being played
repeatedly.
~ REPEAT FOLDER: all files in one folder
being played repeatedly.
~ SHUFFLE: all files in the current folder
being played at random order.
Press PLAY ~ to start the slide-show
playback.
Preview Function (JPEG)
This function shows the content of the
current folder or the whole disc.
Press STOP. during playback.
12 thumbnail pictures will appear on the
TV screen.
~
2
Press ~ / ~ to display the other
pictures on the previous/next page.
3
Use ~~....... to highlight one of the picture
and press ENTER/OK to start playback
OR
Move the cursor to highlight 1#1~lrfl~1 on the
bottom of the page to start playback from
the first picture on the current page.
4
Press MENU to return to Picture CD
menu.
15
Disc Operations
Playing MP3 music and JPEG
picture simultaneously
Zoom picture
During playback, press ZOOM repeatedly
to display the picture with different scales.
2
Use .....
~...T
Load a disc that contains music and
picture.
~ The disc menu appears on the TV
screen.
to view the zoomed picture.
Playback with multi-angles
• During playback, press ..... ~...T to
rotate the picture on the TV screen.
.....: rotate the picture anti-clockwise
~: rotate the picture clockwise
...: flip the picture vertically
T: flip the picture horizontally
Scan Effect
• Press ANGLE repeatedly to choose
different scan effect.
~ Various of scan effect appears on the
top left hand corner on the TV screen.
16
2 Select an MP3 track.
3
During MP3 music playback, select a
picture from the TV screen and press
PLAY~.
~
The picture files will be played back one
after another until end of the folder.
4 To quit simultaneous playback, press
MENU followed by STOP •.
Helpful Hint:
- Some files on Kodak or JPEG disc may be
distorted during playback due to the
conftguration and characteristics of the disc.
Setup Menu
The setup is carried out via the TV,
enabling you to customize the DVD Player
to suit your particular requirements.
Dimming player's front panel
display
You can select different levels of
brightness for the front panel display.
1
In 'GENERAL SETUP PAGE', press.T to
highlight {DISPLAY DIM}, then press ~.
Press SETUP.
~
2
Press ....
3
Press ENTER/OK to confirm.
to select 'General Setup' icon.
100%
Select this for full brightness.
70%
Select this for medium brightness.
40%
Select this for dimming the display.
2
Press.T to select a setting, then press
ENTER/OK to confirm your selection.
Programming disc tracks (not for
Picture CD/MP3)
You can play the contents of the disc in the
order you want by programming the tracks
to be played. Up to 20 tracks can be
stored.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc
from playing by locking the disc. Up to 40
discs can be locked.
In 'GENERAL SETUP PAGE', press.T to
highlight {DISC LOCK}, then press~.
In 'GENERAL SETUP PAGE', press.T to
highlight {PROGRAM}, then press ~ to
select {INPUT MENU}.
2
Press ENTER/OK to confirm.
LOCK
Select this to block the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is '000 000' (see
page 25 "Changing the Password").
UNLOCK
Select this to unlock the disc and allow
futu re playback.
2
Press.T to select a setting, then press
ENTER/OK to confirm your selection.
17
Setup Menu
To input your favorite tracks/chapter
3 Use the numeric keypad (0-9) to enter
OSD Language
This menu contains various language
options for display language on the screen.
For details, see page 8.
a valid track/chapter number.
4
Use ~ ~ ..... to move the cursor to the
next position.
... If the track number is more than ten,
press ~ to open the next page and
proceed with programming or,
... Use ~ ~..... to highlight {NEXT} on the
program menu, then press ENTER/
OK.
S
Repeat steps 3-4 to input another track/
chapter number.
6
Use ~~..... to move the cursor to the
track you want to remove.
7
Press ENTER/OK to remove this track
from the program menu.
Screen Saver
This function is used to turn the screen
saver on or off.
In 'GENERAL SETUP PAGE', press ..... to
highlight {SCREEN SAVER}, then press ~.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
If you want to remove a track
8
OFF
Select this to disable the screen saver
function.
To start program playback
2
Press ..... to select a setting, then press
ENTER/OK to confirm your selection.
Use ~~..... to highlight {START} on the
program menu, then press ENTER/OK.
... Playback will start with the selected
tracks under the programmed
sequence.
This feature automatically sets the DVD
player in standby mode after the amount of
time you have set.
Sleep Timer
In 'GENERAL SETUP PAGE', press ..... to
highlight {SLEEP}, then press ~.
To exit program playback
9
18
Use ~~..... to highlight {EXIT} on the
program menu, then press ENTER/OK.
2
Press ..... to select a setting.
... You can select from 15, 30, 45 and 60
minutes. Select {OFF} to cancel the
sleep timer function.
3
Press ENTER/OK to confirm your
selection.
Setup Menu
OivX® VOO registration code
Yamaha provide you with the DivX® VOD
(Video On Demand) registration code that
allows you to rent and purchase videos
using the DivX® VOD service.
For more information, visit at
www.divx.com/vod.
1
~
2
Press .....
3
Press ENTER/OK to confirm.
to select 'Audio Setup' icon.
In 'GENERAL SETUP PAGE', press .." to
highlight {DIVX(R) VOD CODE}, then
press ~.
~ The registration code will appear.
2
Press ENTER/OK to exit.
3
Use the registration code to purchase or
rent the videos from DivX® VOD service
at www.divx.com/vod. Follow the
instructions and download the video onto
a CD-R for playback on this DVD player.
Setting the Analog output
Helpful Hints:
- All the downloaded videos from DivX®
VOD can only be played back on this DVD
player.
- Time search feature is not available during
DivX movie playback.
Set Analog Output to match your DVD
Player's playback capability.
In 'AUDIO SETUP PAGE', press .." to
highlight {ANALOG OUTPUT}, then press
~.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
LT/RT
Select this if your DVD player is connected
to a Dolby Prologic decoder.
VIRTUAL SURROUND
Select this to reproduce the surround
channels virtually.
2
Press .... to select a setting, then press
ENTER/OK to confirm your selection.
19
Setup Menu
96K
Playback a disc recorded at the sampling
rate of 96kHz. If the 96kHz disc is copy
protected, the digital output will be muted
to comply with the standards.
Setting the Digital output
The options included in Digital Audio are:
'Digital Output' and 'LPCM Output'.
In 'AUDIO SETUP PAGE', press ...... to
highlight {DIGITAL AUDIO}, then press~.
2
Press the ...... to highlight an option.
3
Enter its submenu by
4
Move the cursor by pressing the ...... to
highlight the selected item.
CD Upsampling
pressing~.
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
automatically switch· to stereo mode.
DIGITAL OUTPUT
Set the Digital output according to your
optional audio equipment connection.
In 'AUDIO SETUP PAGE', press ...... to
highlight {CD UPSAMPLING}, then press
OFF
Turn off the digital output.
~.
ALL
If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
PCM ONLY
Only if your receiver is not capable of
decoding multi-channel audio.
LPCM OUTPUT
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc.,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
48K
Playback a disc recorded at the sampling
rate of 48kHz. 96kHz (if available on disc)
PCM data stream will be converted to
48kHz.
20
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2
Press ...... to select a setting, then press
ENTER/OK to confirm your selection.
Note:
- This setting is only applicable for the signals
output from the analog jacks.
Setup Menu
Night Mode
Setting the TV Display
In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favorite action
movie without disturbing others at night.
Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available on
the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
In 'AUDIO SETUP PAGE', press ...T to
highlight {NIGHT MODE}, then press ~.
ON
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
In 'VIDEO SETUP PAGE', press ...T to
highlight {TV DISPLAY}, then press ~.
2
4:3 PAN SCAN
Select this if you have
a normal TV and want
both sides of the
picture to be trimmed
or formatted to fit
your TV screen.
OFF
Select this when you want to enjoy the
surround sound with its full dynamic range.
2
1
Press ...T to select a setting, then press
ENTER/OK to confirm your selection.
2
Press ~ ~ to select 'Video Setup' icon.
Press ENTER/OK to confirm.
i i
j
1
:
--------'---,
4:3 LETTER BOX
Select this if you have a
normal TV. In this case, a
wide picture with black
bands on the upper and
lower portions of the TV screen will be
displayed.
Press SETUP.
3
Press ...T to highlight one of the options
below:
16:9
Select this if you have
a widescreen TV.
3
Select an item and press ENTER/OK.
(U.S.A. model)
TV Type
This menu contains the options for
selecting the color system that matches
the connected TV. For details, see page 7.
21
Setup Menu
2
Progressive
Picture Setting
This feature is only applicable if you have
connected this DVD Player to a
Progressive Scan TV through the Y Pb Pr
jacks (see page 6).
This DVD Player provides three
predefined sets of picture color settings
and one personal setting which you can
define yourself.
In 'VIDEO SETUP PAGE', press." to
highlight {PROGRESSIVE}, then press ~.
In 'VIDEO SETUP PAGE', press." to
highlight {PICTURE SETTING}, then press
OFF
~.
To disable Progressive Scan function.
STANDARD
ON
Select this for standard picture setting.
To enable Progressive Scan function.
BRIGHT
Press . . . to select a setting, then press
ENTER/OK to confirm your selection.
Select this will make the TV picture
brighter.
SOFT
Notes on activating Progressive:
-
Ensure that your TV has progressive
scan.
Connect with YPbPr video cable.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO' BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
"STANDARD DEFINITION" OUTPUT.IFTHERE
ARE QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE
CENTER.
This unit is compatible with the complete line of
YAMAHA products, including the projectors DPX1100, LPX-510 and the plasma monitor PDM4210.
22
Select this will make the TV picture softer.
PERSONAL
Select this to personalize your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
2
Press . . . to select a setting, then press
ENTER/OK to confirm your selection.
3
If you select {PERSONAL}, then proceed
to steps 4-7.
~ The 'PERSONAL PICTURE SETUP'
menu appears.
Setup Menu
4
Press ...T to highlight one of the following
options.
Closed Caption (U.S.A model
only)
BRIGHTNESS
Increase the value will brighten the picture
or vice versa. Choose zero (0) for average
setting.
Closed Captions are data that are hidden
in the video signal on specific discs,
invisible without a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. Subtitles rarely show all of the
audio. For example, captions show sound
effects (e.g., "phone ringing" and
"footsteps"), while subtitles don't.
Before you select this function, please
ensure that the disc contains closed
captions information and your TV set also
has this function.
CONTRAST
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
TINT
Increase the value will darken the picture
or vice versa. Choose zero (0) for average
setting.
COLOR
Increase the value will enhance the color in
your picture or vice versa. Choose zero
(0) to balance the color.
5
In 'VIDEO SETUP PAGE', press'"T to
highlight {CLOSED CAPTION}, then press
~.
Press ..... ~ to adjust the setting that best
suit your personal preference.
ON
To enable Closed Caption function.
6 Repeat steps 4-5 for adjusting other color
OFF
To disable Closed Caption function.
features.
7
Press ENTER/OK to confirm.
2
Selecting the black level (U.S.A.
model only)
Press ...T to select a setting, then press
ENTER/OK to confirm your selection.
If you set the TV type to NTSC, set Black
level to ON. This will improve the color
contrast during playback. The black level
setting has no effect if the TV type is set to
PAL.
In 'VIDEO SETUP PAGE', press'"T to
highlight {BLACK LEVEL}, then press ~.
ON
Select this for enhanced black level.
OFF
Select this for standard black level.
2 Press ...T to select a setting, then press
ENTER/OK to confirm your selection.
23
Setup Menu
In 'PREFERENCE PAGE', press ...T to
highlight {PARENTAL}, then press ~.
Press STOP. twice to stop playback (if
any), then press SETU P.
2
Press ..... ~ to select the 'Preference Setup'
icon.
3
Press ENTER/OK to confirm.
Audio, Subtitle, Disc Menu
These menus contain various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 9.
Restricting playback by Parental
Control
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not suitable
for your children or have certain discs
played with alternative scenes.
24
2
Press ...T to highlight a rating level for the
disc inserted and press ENTER/OK.
~ To disable Parental controls and have all
Discs play, select {8 ADULT}.
3
Use the numeric keypad (0-9) to enter
the six-digit password (see page 25
"Changing the Password").
~ DVDs that are rated above the level you
selected will not play unless you enter
your six-digit password.
Helpful Hints:
- VCD, SVCD, CD have no level indication, so
parental control function has no effect on
these type of discs. This applies to most
illegal DVD discs.
- Some DVDs are not encoded with a rating
though the movie rating may be printed on
the Disc cover. The rating level feature does
not work for such Discs.
PBC (Playback Control)
You can set the PBC to ON or OFF. This
feature is available only on Video CD 2.0
with playback control (PBC) feature. For
details, see page 13.
Setup Menu
MP3/JPEG Menu
2 Press ENTER/OK to enter the 'Password
Change Page'.
MP3/JPEG Navigator can be set only if the
disc is recorded with menu. It allows you
to select different display menus for easy
navigation.
In 'PREFERENCE PAGE', press .... to
highlight {MP3/JPEG NAY}, then press ~.
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
3 Use the numeric keypad (0-9) to enter
your old six-digit password.
.... When doing this for the first time, key
in '000 000'.
.... If you forget your old six-digit
password, key in '000 000'.
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
2 Press .... to select a setting, then press
ENTER/OK to confirm your selection.
Changing the Password
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is 000
000.
In 'PREFERENCE PAGE', press .... to
highlight {PASSWORD}, then press ~ to
select {CHANGE}.
4
Enter the new six-digit password.
5 Enter the new six-digit password a second
time to confirm.
.... The new six-digit password will now
take effect.
6 Press ENTER/OK to confirm.
Restoring to original settings
Setting the DEFAULT function will reset all
options and your personal settings to the
factory defaults, except your password for
Parental Control and Disc Lock.
In 'PREFERENCE PAGE', press .... to
highlight {DEFAULT}, then press ~ to
select {RESET}.
2 Press ENTER/OK to confirm.
.... All settings will now reset to factory
defaults.
25
Language Code
These pages can be used to select other languages.This does not affect the
options in "AUDIO", "SUBTITLE" or "DISC MENU".
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
.Basque
Belarusian
Bengali
Bihari
Bislama
Bokmal, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Ch~hew~Chew~Nya~a
Chinese
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Cornish
Corsican
Croatian
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scottish Gaelic
Gallegan
Georgian
26
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
German
Gikuyu; Kikuyu
Greek,
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Indonesian
Interlingua (International)
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
KalaaHisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger;
Limburger; Limburgan;
Limburgish; Limburger;
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
Language Code
These pages can be used to select other languages.This does not affect the options in
"AUDIO", "SUBTITLE" or "DISC MENU".
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmal; Bokmal,
Norwegian Nynorsk;
Nya~a;C~chew~Chewa
Nynorsk, Norwegian;
Occitan (post 1500); Proven
Old Bulgarian; Old Slavonic;
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provent;al; Occitan (post)
Pushto
Quechua
Raeto- Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Siovenian
Somali
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
7866
7878
7889
7878
7967
6785
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
VolapOk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
27
Troubleshooting
Refer to the chart below when this unit does not function properly. If the
problem you are experiencing is not listed below or if the instruction below does
not help, set this unit to the standby mode, disconnect the power cord, and
contact the nearest authorized YAMAHA dealer or service center.
No picture
Distorted picture
Completely distorted picture
or black/white picture with
DVD
No sound or distorted sound
No audio at digital output
Disc can't be played
Picture freezes momentarily
during playback
28
Troubleshooting
Buttons do not work
Player does not respond to
some operating commands
during playback.
DVD Player cannot read CDsl
DVDs
Menu items cannot be selected
Unable to play DivX movies
No sound during DivX movies
playback
29
Glossary
Analog: Sound that has not been turned into numbers.Analog sound varies, while digital sound has
specific numerical values. These jacks send audio
through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image. The horizontal vs. vertical
ratio of conventional TVs. is 4:3, and that of widescreens is 16:9.
AUDIO OUT lacks: Jacks on the back of the
DVD System that send audio to another system (TV,
Stereo, etc.).
Bit Rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds, or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate. or the higher the recording
speed, the better the sound quality. However. higher
bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece on
a DVD that are smaller than titles.A title is composed of several chapters. Each chapter is assigned a
chapter number enabling you to locate the chapter
you want.
Component Video Out lacks: Jacks on the back
of the DVD System that send high-quality video to a
TV that has Component Video In jacks (RJG/B.Y/Pb/
Pr, etc.).
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles.
etc. recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when you
use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks.These jacks send audio through multiple
channels. instead of just two channels as analog
does.
DivX 3.11/4xJSx: The DivX code is a patent pending. MPEG-4 based video compression technology,
developed by DivXNetworks, Inc., that can shrink
digital video to sizes small enough to be transported
over the internet, while maintaining high visual quality.
Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six
channels of digital audio (front left and right, surround left and right. center and subwoofer).
DTS: Digital Theatre Systems.This is a surround
sound system, but it is different from Dolby Digital.
The formats were developed by different companies.
'PEG: A very common digital still picture format.A
still-picture data compression system proposed by
the Joint Photographic Expert Group, which features small decrease in image quality in spite of its
high compression ratio.
30
MP3: A file format with a sound data compression
system. "MP3" is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3.By
using MP3 format, one CD-R or CD-RW can contain about 10 times as much data volume as a regular CD can.
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated,
playback will be prohibited if the software's level is
higher than the user-set level.
PCM (Pulse Code Modulation>: A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can
enjoy interactive-type software as well as software
having a search function.
Progressive Scan: It displays all the horizontal
lines of a picture at one time, as a signal frame. This
system can convert the interlaced video from DVD
into progressive format for connection to a progressive display. It dramatically increases the vertical resolution.
Region code: A system for allowing discs to be
played back only in the region designated beforehand.This unit will only play discs that have compatible region codes.You can find the region code of
your unit by looking on the product label. Some
discs are compatible with more than one region (or
ALL regions).
S-Video: Produces a clear picture by sending separate signals for the luminance and the color.You can
use S-Video only if your TV has S- video In jack.
Surround: A system for creating realistic three
dimensional sound fields full of realism by arranging
multiple speakers around the listener.
Title: The longest section of a picture or music feature on DVD, music, etc., in video software, or the
entire album in audio software. Each title is assigned
a title number enabling you to locate the title you
want.
VIDEO OUT jack: Jack on the back of the DVD
System that sends video to a TV.
Specifications
AUDIO PERFORMANCE
PLAYBACK SYSTEM
DVO Video
DA Converter
Video CO & SVCD
Signal-Noise (1 kHz)
24bit
105dB
CD
Dynamic range (1 kHz)
100dB
PICTURE CD
DVD
CD-R,CD-RW
DVD+R, DVD+RW
SVCD
DVD-R, DVD-RW
CDNCD
VIDEO PERFORMANCE
Video (CVBS) Output
1 Vpp into 75 ohm
S-Video output
Y: 1 Vpp into 7S ohm
Component video output
C: 0.3 Vpp into 7S ohm
Y: 1 Vpp into 7S ohm
fs 96 kHz
2Hz- 44kHz
fs 48 kHz
2Hz- 22kHz
fs 48 kHz
2Hz- 22kHz
fs 44.1 kHz
2Hz· 20kHz
fs 44.1 kHz
2Hz- 20kHz
Distortion and Noise (1 kHz)
0.003%
TV STANDARD (NTSC/60Hz) (PAUSOHz)
Number of lines
525
625
Playback
Multistandard
(PAUNTSq
Pa PR: 0.7 Vpp into
75 ohm
Cinch (green)
Pa Output
Cinch (blue)
Mpeg/ Dolby Digital! Compressed Digital
PR Output
Cinch (red)
DTS
S-Video Output
Mini DIN, 4 pins
16, 20, 24 bits
Video Output
Cinch
fs, 44.1, 48, 96 kHz
Audio Output (L+R)
Cinch
24,32,56,64,96,128,
Digital Output
1 coaxial, 1 optical
AUDIO FORMAT
Digital
CONNECTIONS
Y Output
PCM
MP3(ISO 9660)
WMA
2S6 kbps
lEC609S8 for CDDA / LPCM
fs, 16, 22.05, 24, 32,
lEC61937 for MPEG1, MPEG 2,
44.1,48 kHz
Dolby Digital and DTS
32 kbps-192 kbps, mono,
stereo
Analog Sound Stereo
CABINET
Dimensions (w x d x h)
435x310x51 mm
Weight
Approx. 2.6 Kg
POWER SUPPLY
Power supply
U.SAmodel
nov, 60Hz
Australia model
240V, 50Hz
Power usage
Approx.14W
Power usage standby
<1W
Specifications subject to change without prior
notice
31
.YAMAHA
©2004 YAMAHA CORPORATION All rights reserved.
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE, BlJENA PARK, CALIF. 90620, U.S.A
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1 S 3R1, CANADA
I'LI'CTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34. 25462 RELLINGEN 8EI HAMBURG, F.R OF GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORO, HERTS WD187GO. ENGLAND
SCANDINAVIA A.B. J A WETIERGRENS GATA 1, BOX 30053, 400 43 VASTRA FROLUNDA, SWEDEN
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE. 3205 VIC., AUSTRALIA
Printed
YAMAHA CORPORATION
in China ®
3139 246 14271
.YAMAHA
Registering Your New Yamaha
Product is Fast and Easy
Thank you for purchasing a new product from Yamaha Electronics.Weld like to
continue providing you with high quality products and better service. So, we've made
it simple to register your new product purchase online. Please take a few minutes to
visit our website at www.yamaha.comIYEC/registration/ and complete the
information and questions included there. We appreciate your business and we look
forward to hearing from you.
Failure to complete the registration form does not diminish your warranty rights in any way.
Product registration applies to USA customers only.
313924604121
WF13680
_YAMAHA
Should you encounter any problem with your model DV-S5650, DV-S5750, DV-S5751, DV-S5770, DV-S5860,
DVD-S540, DVD-S550, DVD-S657 ,DVD-S1500, DV-SL100, DVD-C740, DVD-C750, DV-C6660, DV-C6760,
DV-C6761, DV-C6770, DV-C6771 DVD Player, or DRX-2 DVD Recorder, please follow the troubleshooting
instructions in your Owner's Manual, and see the FAQs at WWW.YAMAHA.COMIYEC. Then, if your DVD
Player requires service, please follow the instructions shown below.
(NOTE: The following instructions and
form apply only to the above DVD Player models and only for warranty-covered repair or replacement service,
as provided by the YAMAHA One (1) Year Limited Warranty.)
INSTRUCTIONS:
1.
Complete the service/exchange form below.
2.
Pack the DVO Player, its Owner's Manual and all its accessories in the original box or a suitable alternative.
If YAMAHA elects to exchange your OVO Player, you will receive replacement accessories with your replacement
product. If you require information or wish to order new packing materials, call YAMAHA at (714) 522-9888.
3.
Put the completed service/exchange form and a copy of your original sales receipt into an envelope. Label the
envelope "Return Documents Enclosed." Place this envelope in the box with the product.
4.
Seal the box with packing tape and ship the complete package via,l:Jnited Parcel Service or FedEx, insured and
freight prepaid* to:
.)
YAMAHA Electronics Corp., USA
Attn: DVD PLAYER SERVICE/EXGHANGE
6600 Orangethorpe Avenue
Buena Park, CA 90620
Within the terms of your YAMAHA Limited Warranty, the DVD Player will be serviced and returned to you or it will be
. replaced wit~~~ new or refurbished product within 5 working days.
*(You will pay all shipping and insurance costs for shipment to YAMAHA; and YAMAHA will pay all warrantycovered service or exchange costs plus shipping and insurance costs when returning a product to you.)
SERVICE/EXCHANGE FORM
Your Address (i.e., the street address to which YAMAHA should ship the serviced or exchanged product)
Name:
_
Street Address:
City:
State:
Apt. #:
_
Zip Code:
_
Yourdayti~e phone number:~~~~~_~~~~~~~~~~_~~(8A~
to 5 p~ Pacffictime)
~etailed reason for return (use additional paper ~ necessary): ~~~~~_~~~~~~~~~~~
DVD Player you are shipp"ing to YAMAHA
Remember, the box you ship to YAMAHA must include the followin.g:
1.
2.
The DVD Player.
Owners Manual and all the accessories
originally supplied with the DVD PI.ayer.
3.
4.
Sales receipt showing date and place of purchase.
Completed service/exchange form.
~
IF THE WARRANTY HAS EXPIRED, LEA~N ABOUT YAMAHA'S DVD PLAYER CUSTOMER·
LOYALTY PROGRAM AT WWW.YAMAkiA.COMIYEC/CUSTOMER/DVDEXCHANGE.HTM OR
CALL (888) 435..7932, MONDAY THROUGH FRIDAY, 8 AM to 4 PM PACIFIC TIME.
.YAMAHA
HOME AUDIO PRODUCTS LIMITED WARRANTY'
,)
SERVICE DEPARTMENT
YAMAHA Electronics Corporation, USA
6660 Orangethorpe Avenue, Buena Park, California 90620-1345
Telephone: (714) 522-9105
Internet URL : http://www.yamaha.com/yec/
To obtain warranty service for yourVAMAHA DV~ player or changer, please'dial (800) 292·2982 or please visit us at
http://www.yamaha.com/yec/customer/dvdexchange.htm.
Type of Product
Duration of Warranty (beginning from first consumer purchase)
DVD Player
'
1 year
What is covered and what is Not Covered:
This warranty covers all defects in materials or workmanship in this product, but DOE; "
(1)
Damage, deterioration or malfunction resulting from:
a. Accident, negligence, misuse, abuse, improper installation or opera~
Manual.
b. Any shipment of the product. (Claims must be presented to the carrier)
(2)
c. Repair or attempted repair by anyone other than YAMAHA or an authori
Any unit which has been altered or on which the serial number has been defa
(3)
Normal wear, battery replacement and any periodic
(4)
Any unit which has not been purchased from
nce.
AHA Home A
whether adealer has been authorized by'fJ
(5)
tact YAMAHA's Se
r in the U.S.A. If you are uncertain as to
artment, above.
Any unit used for industrial or commercial
Who may enforce the warranty:
This warranty is enforceable only by the original pur
What we will pay for and what
er for labo.r or materials. YOU ARE RESPONSIBLE
G CHARGES, if the product(s) must be shipped for
YAMAHA will repair or replaqe units cove
FOR ANY INSTALLATION OR REMOVAL
ithin the U.S.A. if the repairs are covered by the warranty.
warranty service. However, we will pay the retur
How you can g
(1)
(2)
Center in the U.S.A., or a'
Product(s) shipped for servi
service, as well as your sales re
(3)
thorized YAMAHA dealer in the U.S.A. and the dealer will advise you of the
If your YAMAH
procedures to be f
request that you sen
Warranty registration is not require
AHA at the address, telephone number or Internet URL shown above. We may
horized YAMAHA Service Center, to an authorized YAMAHA Regional Service
oduct(s) to YAMAHA for repair or replacement at YAMAHA's option.
y and must be accompanied by a detailed explanation of the problem(s) requiring
date and place of purchase, as evidence of warranty coverage.
overage.
Limitation of Implied Warranties:
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
Exclusion of Damages:
YAMAHA'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT OUR OPTION.
IF WE ELECT TO REPLACE THE PRODUCT: THE REPLACEMENT MAY BE A RECONDITIONED UNIT. YAMAHA SHALL NOT BE LIABLE FOR
DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF
USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AN.D EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES·YOU
SPECIFIC.LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.