SR230
Service Manual
2004
x
PREFACE
This manual has been prepared by Yamaha primarily for use by Yamaha dealers and their trained
mechanics when performing maintenance procedures and repairs to Yamaha equipment. It is not
possible to put an entire mechanic’s education into one manual, so it is assumed that persons using
this book to perform maintenance and repairs on Yamaha machines have a basic understanding of
the mechanical concepts and procedures inherent in machine repair technology. Without such
knowledge, attempted repairs or service to this model may render it unfit to use and/or unsafe.
Because Yamaha has a policy of continuously improving its products, models may differ in detail
from the descriptions and illustrations given in this publication. Use only the latest edition of this
manual. Authorized Yamaha dealers are notified periodically of modifications and significant
changes in specifications and procedures, and these are incorporated in successive editions of this
manual.
SR230
SRT1000-B/BC Service Manual - 2003
First Edition
©2003 by Yamaha Motor Corporation, U.S.A.
July 2003
All rights reserved. Any reprinting
or unauthorized use
without the written permission of
Yamaha Motor Corporation, U.S.A.
is expressly prohibited.
Printed in U.S.A.
Specifications, features and options are subject to
change without notice.
03-187
HOW TO USE THIS MANUAL
MANUAL FORMAT
All of the procedures in this manual are organized in a sequential, step-by-step format. The information has been compiled to provide the mechanic with an easy-to-read, handy reference that contains comprehensive explanations of all disassembly, repair, assembly, and inspection operations.
In this revised format, the condition of a faulty component will precede an arrow symbol and the
course of action required will follow the symbol, e.g.:
● Bearings
Pitting/Damage ➔ Replace.
To assist you in finding your way about this manual, the Section Title and Major Heading is given
at the head of every page.
An index to contents is provided on the first page of each section.
THE ILLUSTRATIONS
Some illustrations in this manual may differ from the model you have. This is because a procedure
described may relate to several models, though only one may be illustrated. (The name of model
described will be mentioned in the description).
REFERENCES
These have been kept to a minimum, however, when you are referred to another section of the manual, you are told the page number.
WARNINGS, CAUTIONS AND NOTES
Attention is drawn to the various Warnings, Cautions, and Notes which distinguish important information in this manual in the following ways:
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
WARNING
Failure to follow WARNING instructions could result in severe injury or death to the machine
operator, a bystander, or a person inspecting or repairing the jet boat.
CAUTION:
A CAUTION indicates special precautions that must be taken to avoid damage to the jet boat.
NOTE: ________________________________________________________________________
A NOTE provides key information to make procedures easier or clearer.
IMPORTANT: __________________________________________________________________
This part has been subjected to change of specification during production.
HOW TO READ DESCRIPTIONS
1. A disassembly/installation job instruction mainly consists of the exploded diagram 1.
2. The numerical figures represented by the number 2 indicates the order of the job steps.
3. The symbols represented by the number 3 indicates the contents and notes of the job.
For the meanings of the symbols, refer to the next page(s).
4. The REMOVAL AND INSTALLATION CHART 4 is attached to the exploded diagram and
explains the job steps, part names, notes for the jobs, etc.
5. The SERVICE POINTS, other than the exploded diagram, explains in detail the items difficult to
explain in the exploded diagram of REMOVAL AND INSTALLATION CHART, the Service Points
requiring the detailed description 5, etc.
SYMBOLS
Symbols 1 to 9 are designed as thumb-tabs
to indicate the content of a chapter:
1
2
3
4
5
6
7
8
9
HULL
DECK
General Information
Specifications
Periodic Inspection and Adjustment
Fuel System
Power Unit
Jet Pump Unit
Electrical System
Hull and Deck
Trouble Analysis
Symbols 10 to 15 indicate specific data:
10 Special Tool
11 Specified Liquid
12 Specified Engine Speed
13 Specified Torque
14 Specified Measurement
15 Specified Electrical Valve
[Resistance (Ω), Voltage (V),
Electric Current (A)]
Symbol 16 to 18 in an exploded diagram indicate grade of lubricant and location of lubrication point:
16
17
18
Apply Yamaha 2-stroke outboard motor oil
Apply water resistant grease (Yamaha
grease A, Yamaha marine grease)
Apply molybdenum disulfide grease
Symbols 19 to 24 in an exploded diagram indicate grade of sealing or locking agent and location of application point:
19
20
21
22
23
24
Apply Gasket Maker®
Apply Yamabond #4 (Yamaha Bond No. 4)
Apply LOCTITE® No. 271 (Red LOCTITE)
Apply LOCTITE® No. 242 (Blue LOCTITE)
Apply LOCTITE® No. 567 (PST)
Apply Silicone Sealant
NOTE: ______________________________
In this manual, the above symbols may not be
used in every case.
567
INDEX
GEN
INFO
GENERAL INFORMATION
1
SPEC
SPECIFICATIONS
2
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
3
FUEL
FUEL SYSTEM
4
POWR
POWER UNIT
5
JET
PUMP
JET PUMP
6
ELEC
ELECTRICAL SYSTEM
7
HULL
DECK
HULL AND DECK
8
TRBL
ANLS
TROUBLE ANALYSIS
9
x
CHAPTER 1
GENERAL INFORMATION
IDENTIFICATION NUMBERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
PRIMARY I.D. NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
ENGINE SERIAL NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
HULL IDENTIFICATION NUMBER (H.I.N.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
SAFETY WHILE WORKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
FIRE PREVENTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
VENTILATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
SELF-PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
OILS, GREASES AND SEALING FLUIDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
GOOD WORKING PRACTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
SPECIAL TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
MEASURING TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
SPECIAL TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6
REMOVAL AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
GENERAL INFORMATION x
GEN
INFO
1
A60700-0*
IDENTIFICATION NUMBERS
PRIMARY I.D. NUMBER
The primary I.D. number is stamped on a label
attached to the deck under the rear seat.
Starting Primary I.D. Number:
F1C-700101~
ENGINE SERIAL NUMBER
The engine serial number is stamped on a label
attached to the crankcase.
Starting Engine Serial Number:
6B5: 700101~
HULL IDENTIFICATION NUMBER
(H.I.N.)
The H.I.N. is stamped into the hull on the starboard side of the stern.
1-1
1
GEN
INFO
GENERAL INFORMATION
SAFETY WHILE WORKING
The procedures given in this manual are those
recommended by Yamaha to be followed by
Yamaha dealers and their mechanics.
FIRE PREVENTION
Gasoline (petrol) is highly flammable.
Petroleum vapor is explosive if ignited. Do not
smoke while handling gasoline (petrol), and
keep it away from heat, sparks, and open
flames.
VENTILATION
Petroleum vapor is heavier than air and if
inhaled in large quantities will not support life.
Engine exhaust gases are harmful to breathe.
When test-running an engine indoors, maintain
good ventilation.
SELF-PROTECTION
Protect your eyes with suitable safety spectacles or safety goggles when using compressed
air, when grinding or when doing any operation
which may cause particles to fly off.
Protect hands and feet by wearing safety
gloves and protective shoes if appropriate to
the work you are doing.
OILS, GREASES AND SEALING FLUIDS
Use only Genuine Yamaha oils, greases and
sealing fluids or those recommended by
Yamaha.
Under normal conditions of use, there should
be no hazards from the use of the lubricants
mentioned in this manual. However, safety is
all-important, and by adopting good safety
practices, any risk is minimized. A summary of
the most important precautions is as follows:
1. While working, maintain good standards of
personal and industrial hygiene.
2. Clothing which has become contaminated
with lubricants should be changed as soon
as practicable and laundered before further
use.
1-2
GENERAL INFORMATIONx
GEN
INFO
1
3. Avoid skin contact with lubricants; do not,
for example, place a soiled wiping-rag in
one’s pocket.
4. Hands, and any other part of the body
which have been in contact with lubricants
or lubricant-contaminated clothing, should
be thoroughly washed with hot water and
soap as soon as practicable.
5. To protect the skin, the application of a suitable barrier cream to the hands before
working is recommended.
6. A supply of clean lint-free cloths should be
available for wiping purposes.
GOOD WORKING PRACTICES
1. The right tools
Use the special tools that are designed to
protect parts from damage. Use the right
tool in the right manner – don’t improvise.
2. Tightening torque
Follow the torque tightening instructions.
When tightening bolts, nuts and screws,
tighten the larger sizes first, and tighten
inner-positioned fasteners before outerpositioned ones.
3. Non-reusable items
Always use new gaskets, packings,o-rings,
oil seals, split-pins and circlips, etc. on
reassembly.
1-3
1
GEN
INFO
GENERAL INFORMATION
DISASSEMBLY AND ASSEMBLY
1. Clean parts with solvent and compressedair on disassembling them.
2. Oil the contact surfaces of moving parts on
assembly.
3. After assembly, check that moving parts
operate normally.
4. Install bearings with the manufacturer’s
markings on the side exposed to view and
liberally oil the bearings.
CAUTION:
Do not use compressed air to spin the bearings dry. This causes damage to the bearing
surfaces.
5. When installing oil seals, apply a light coating of water-resistant grease to the outside
diameter.
1-4
GENERAL INFORMATIONx
GEN
INFO
1
SPECIAL TOOLS
Use of the correct special tools recommended
by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and
use of improper tools can cause damage to the
equipment.
YU-03097-B
90890-01252
90890-06583
90890-06584
NOTE:
• For U.S.A. and Canada, use part numbers
starting with “J-”, “YB-”, “YM-”,“YS-”, “YU-” or
“YW-”.
• For other countries, use part numbers starting
with “90890-.”
MEASURING TOOLS
1 Dial Gauge
P/N YU-03097-B
90890-01252
2 Dial Gauge Stand
P/N 90890-06583
YW-06585
90890-06585
3 Dial Gauge Needle
P/N 90890-06584
YU-03112-C
90890-03112
4 Dial Gauge Stand Set
P/N YW-06585
90890-06585
YU-A1927
90890-03174
5 Pocket Tester
P/N YU-03112-C
90890-03112
90890-03094
90890-03060
7 Vacuum Synchronizer
P/N YU-44456
VacuumMate®
YU-44456
6 Digital Circuit Tester
P/N YU-A1927
90890-03174
4 DYN
3
55
2 AVE
40
54
25
RPM 1
39
53
2500
24
38
52
2400
23
37
51
2300
22
36
50
2200
21
35
49
2100
20
34
48
2000
19
33
47
1900
18
32
46
P
17
1800
31
45
16
1700
30
44
15
1600
29
43
14
1500
28
42
13
1400
27
41
12
1300
26
40
11
1200
25
39
10
24
1100
38
9
23
1000
37
8
900
22
36
7
800
21
Hg
cm
6
700
cm Hg
600
5
P
DYN
cm Hg
5
25
VAC
RPM
8 Vacuum Gauge
P/N 90890-03094
Vacuum attachment
P/N 90890-03060
Pa
AVE
35
40
20
12V
4
4-t
2-t
3
2
1
Pa
Pa
Pa
Pa
YW-06862
90890-06862
9 Test Connector
P/N YW-06862
90890-06862
YW-06842
90890-06842
10
1-5
Fuel Pressure Gauge Adapter
P/N YW-06842
90890-06842
1
GEN
INFO
GENERAL INFORMATION
SPECIAL TOOLS
11
Fuel Pressure Gauge
P/N YB-06766
90890-06786
12
Compression Gauge Extension
P/N 90890-06582
13
Cylinder Gauge Set
P/N YU-03017
90890-06759
14
Compression Gauge
P/N YU-33223-1
90890-03160
15
Peak Voltage Adapter
P/N YU-39991
90890-03172
16
Spark Gap Tester
P/N YM34487
90890-06754
17
Test Harness (2 pins)
P/N YB-06792
90890-06792
18
Test Harness (3 pins)
P/N YB-06791
90890-06791
19
Test Harness (3 pins)
P/N YB-06770
90890-06770
20
Test Harness (6 pins)
P/N YB-06790
90890-06790
21
Test Harness (3 pins)
P/N YB-06793
90890-06793
22
Test Harness ( 3 pins)
P/N YB-0677
90890-06777
1-6
GENERAL INFORMATIONx
GEN
INFO
1
SPECIAL TOOLS
YB-06769
90890-06769
YB-35956-A
90890-06756
23
Test Harness (3 pins)
P/N YB-06769
90890-06769
24
Vacuum/Pressure Pump Gauge Set
P/N YB-35956-A
90890-06756
25
Yamaha Diagnostic System for Watercraft
P/N LIT-YDIS1-21-00
26
Yamaha Diagnostic System Connector
for Watercraft
P/N 60V-WS850-00-00 USB Cable
P/N 68F-WS850-00-00 Serial Cable
LIT-YDIS1-21-00
60V-85300-01
-WS853-01
60V
60V-WS850-00-00
USB Cable /
68F-WS850-00-00 Serial Cable
YAMAHA DIAGNOSTIC SYSTEM
for Watercraft
INSTALLATION MANUAL
60E-2819K-10
YW-06862
90890-06862
1-7
1
GEN
INFO
GENERAL INFORMATION
REMOVAL AND INSTALLATION TOOLS
YU-38411
90890-01426
YW-06551
1 Oil Filter Wrench
P/N YU-38411
90890-01426
90890-06551
2 Coupler Wrench
P/N YW-06551
90890-06551
YS-01880-A
90890-01701
YM-01082
90890-01080
3 Sheave Holder
P/N YS-01880-A
90890-01701
4 Rotor Puller
P/N YM-01082
90890-01080
YU-01235
90890-01235
YM-45469
90890-04019
5 Rotor Holder
P/N YU-01235
90890-01235
6 Valve Remover/Installer Kit
P/N YM-45469
90890-04019
YM-4114 (¯19 mm )
90890-04114 (¯19 mm)
YM-4108 (¯22 mm )
90890-04108 (¯22 mm)
YM-04112 (¯4. 0 mm)
90890-04112 (¯4. 0 mm)
YM-04117 (¯4. 5 mm)
90890-04117 (¯4. 5 mm)
7 Valve Spring Compressor Attachment
P/N YM-4114 (ø19 mm)
90890-04114 (ø19 mm)
YM-4108 (ø22 mm)
90890-04108 (ø22 mm)
YM-04111 (¯ 4.0 mm)
90890-04111 (¯ 4.0 mm)
YM-04116 (¯ 4.5 mm)
90890-04116 (¯ 4.5 mm)
8 Valve Guide Remover
P/N YM-04111 (ø4.0 mm)
90890-04111 (ø4.0 mm)
YM-04116 (ø4.5 mm)
90890-04116 (ø4.5 mm)
YM-04113 (¯ 4.0 mm)
90890-04113 (¯ 4.0 mm)
YM-04118 (¯ 4.5 mm)
90890-04118 (¯ 4.5 mm)
9 Valve Guide Installer
P/N YM-04112 (ø4.0 mm)
90890-04112 (ø4.0 mm)
YM-04117 (ø4.5 mm)
90890-04117 (ø4.5 mm)
10
1-8
Valve Guide Reamer
P/N YM-04113 (ø4.0 mm)
90890-04113 (ø4.0 mm)
YM-04118 (ø4.5 mm)
90890-04118 (ø4.5 mm)
GENERAL INFORMATIONx
11
GEN
INFO
1
Valve Seat Cutter
Intake
P/N 90890-06813 (60°)
90890-06814 (45°)
90890-06815 (30°)
Exhaust
P/N 90890-06315 (60°)
90890-06312 (45°)
90890-06328 (30°)
1-9
12
Valve Seat Cutter Holder
P/N 90890-06811 (ø4.0 mm)
90890-06812 (ø4.5 mm)
13
Valve Seat Cutter Set
P/N YM-91043-C
14
Piston Ring Compressor
P/N YM-08037
90890-05158
15
Drive Shaft Holder (Impeller)
P/N YB-06151
90890-06519
16
Slide Hammer Set (jet pump bearing)
P/N YB-06096
17
Stopper Guide Plate (jet pump bearing)
P/N 90890-06501
18
Bearing Puller (jet pump bearing)
P/N 90890-06535
19
Bearing Puller Claw 1 (jet pump bearing)
P/N 90890-06536
20
Stopper Guide Stand (jet pump bearing)
P/N 90890-06538
21
Drive Rod L3 (jet pump bearing)
P/N 90890-06652
22
Needle Bearing Attachment
(jet pump bearing and oil seal)
P/N YB-06112, YB-06196
90890-06614, 90890-06653
1
GEN
INFO
GENERAL INFORMATION
1-10
CHAPTER 2
SPECIFICATIONS
GENERAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
MAINTENANCE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
JET PUMP UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
HULL AND HOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
TIGHTENING TORQUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
GENERAL TORQUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
CABLE AND HOSE ROUTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
GENERAL SPECIFICATIONSx
SPEC
GENERAL SPECIFICATIONS
1.72 (5.67 ft)
Jet thrust nozzle trim angle
Impeller pitch
Degree
Degree
+3
Port 17.3 / Stbd. 16.3
2-1
2
2
SPEC
GENERAL SPECIFICATIONS
2-2
MAINTENANCE SPECIFICATIONSx
2-3
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
2-4
MAINTENANCE SPECIFICATIONSx
2-5
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
Port 17.3 Stbd. 16.3
Marine Group 24
Dual Purpose 675 CCA
100 (12/68.4)
2-6
MAINTENANCE SPECIFICATIONSx
2-7
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
Main (At Battery)
Starter (At each engine)
B
2-8
MAINTENANCE SPECIFICATIONSx
Part To Be Tightened
1/4-20
8-32
10-24
2-9
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
TIGHTENING TORQUES
Part To Be Tightened
2-10
MAINTENANCE SPECIFICATIONSx
TIGHTENING TORQUES
Part To Be Tightened
2-11
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
TIGHTENING TORQUES
Part To Be Tightened
2-12
SPEC
MAINTENANCE SPECIFICATIONSx
TIGHTENING TORQUES
Part To Be Tightened
M8
2-13
6
3
20
2.0
14
2
2
SPEC
MAINTENANCE SPECIFICATIONS
TIGHTENING TORQUES
Part To Be Tightened
Water inlet cover/water inlet
strainer - impeller duct
Drive shaft nut - drive shaft
Impeller (left-hand threads) –
drive shaft
Intermediate housing - bulkhead
Driven coupling - shaft
Grease nipple - intermediate
housing
Hull:
Steering cable locknut
(jet thrust nozzle side)
Steering cable grommet – hull
Pilot water outlet - hull
Engine mount – hull
Engine damper – hull
Electrical:
Electrical box - bulk head
Terminal cover - electrical box
Cover - electrical box
Starter motor lead - electrical box
Battery positive lead electrical box
Fuse holder stay - electrical box
ECM - electrical box
Bracket (coupler) - electrical box
Part Name
Bolt
Thread
size
Qty
M6
43
Tightening torque
N•m
kgf•m ft•lb
6.6
0.66
4.8
Nut
Impeller
–
M20
1
1
69
18
6.9
1.8
50
13
Bolt
Driven
coupling
Nipple
M8
3
17
1.7
12
M24
–
1
1
36
5.4
3.6
0.54
25
3.9
Nut
–
1
6.5
0.65
4.7
Nut
Nut
Bolt
Bolt
–
M8
M6
1
2
8
4
5.9
4.2
17
6.4
0.59
0.42
1.7
0.64
4.3
3.0
12
4.6
Bolt
Screw
Tapping
screw
Screw
Screw
M8
M5
ø5
4
4
18
17
4.9
4.9
1.7
0.49
0.49
12
3.5
3.5
M6
M6
1
1
7.6
7.6
0.76
0.76
5.5
5.5
Tapping
screw
Tapping
screw
Tapping
screw
ø6
1
3.9
0.39
2.8
ø6
4
3.9
0.39
2.8
ø6
1
3.9
0.39
2.8
2-14
Remarks
SPEC
MAINTENANCE SPECIFICATIONSx
2
TIGHTENING TORQUES
Part To Be Tightened
Main and fuel pump relay
Rectifier/regulator
Ignition coil - oil tank
Ignition coil cover - ignition coil
case
Part Name
Tapping
screw
Tapping
screw
Bolt
Tapping
screw
Thread
size
Qty
ø6
1
2-15
Tightening Torque
N•m
kgf•m ft•lb
3.9
0.39
2.8
ø6
2
3.9
0.39
2.8
M6
ø6
3
10
7.6
4.9
0.76
0.49
5.5
3.5
Remarks
2
SPEC
Nut A
8 mm
10 mm
12 mm
14 mm
17 mm
MAINTENANCE SPECIFICATIONS
GENERAL TORQUE
General Torque
Specifications
Bolt B
M5
M6
M8
M10
M12
Nm
M•kg
ft•lb
5.0
8.0
18
36
43
0.5
0.8
1.8
3.6
4.3
3.6
5.8
13
25
31
This chart specifies the torques for tightening
standard fasteners with standard clean dry ISO
threads at room temperature. Torque specifications for special components or assemblies are
given in applicable sections of this manual. To
avoid causing warpage, tighten multifastener
assemblies in a criss-cross fashion, in progressive stages until the specified torque is
reached.
B
A
General Torque
Specifications
Bolt
Dia.
Nm
M•kg
ft•lb
6-32
8-32
10-24
1/4-20
5/16-18
1.1
2.3
2.6
8.6
15
0.11
0.23
0.26
0.86
1.5
0.8
1.65
1.9
6.25
11.0
2-16
MAINTENANCE SPECIFICATIONSx
CABLE AND HOSE ROUTING
2-17
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
CABLE AND HOSE ROUTING
2-18
MAINTENANCE SPECIFICATIONSx
CABLE AND HOSE ROUTING
2-19
SPEC
2
2
SPEC
MAINTENANCE SPECIFICATIONS
CABLE AND HOSE ROUTING
2-20
MAINTENANCE SPECIFICATIONSx
CABLE AND HOSE ROUTING
2-21
SPEC
2
CHAPTER 3
PERIODIC INSPECTION AND ADJUSTMENT
MAINTENANCE INTERVAL CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
PERIODIC SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
CONTROL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
POWER UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
JET PUMP UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20
BILGE PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
PERIODIC INSPECTION AND ADJUSTMENT x
3-1
INSP
ADJ
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
PERIODIC SERVICE
CONTROL SYSTEM
Steering helm inspection
1. Check:
● Friction
Excessively heavy ➔
Replace the steering helm unit.
2. Check:
● Free play
Excessive free play ➔
Replace the steering helm unit.
Steering cable adjustment
1. Measure:
● Distance between the center of the
steering nozzle joint and the cooling
water casting boss on the right side of
the pump. Incorrect distance ➔ Adjust
steering cable joint at nozzle end.
Steering Adjustment Distance:
11.24 in (285.45mm)
285.45MM
WARNING
The cable joints must be screwed in more
than 8mm (0.31 in).
4.9~7.8 Nm (0.49~.78 kg•m, 3.54~5.64 ft-lb)
Lock Nut: 4.9 ~ 7.8Nm
(0.49~0.78 kg-m, 3.54~5.64 ft-lb)
8MM (0.31 IN) MINIMUM
3-2
PERIODIC INSPECTION AND ADJUSTMENT x
INSP
ADJ
3
REMOTE CONTROL UNIT
1. Check throttle:
● Throttle lever at Wide-Open-Throttle
(W.O.T.) position.
Throttle cable wheel, clearance to stop
on carburetor incorrect ➔ Adjust.
● Throttle lever at idle position.
Throttle cable wheel does not touch idle
screw ➔ Adjust.
No free play ➔ Adjust.
a
Throttle cable inspection and adjustment
Throttle Cable Joint Set Position
a: .67 in (17mm)
min. engagement .5 in (12.5mm)
Throttle Cable Adjustment Steps:
a) Remove the four screws holding the
remote control unit cover. Remove the
four screws holding the remote control
unit to the deck. Lift the remote control
unit.
b) Check that throttle cable joints are set at
0.75 in (19mm) of thread engagement at
the control end. Adjust if necessary.
c) Adjust each throttle cable so that the
cable wheel has 0.001 in (0.025mm) to
0.079 in (2.0mm) clearance to the stop
when the levers are pushed to the WideOpen-Throttle (W.O.T.) position.
d) Check that the cable wheel hits the idle
screw when the throttle levers are pulled
back to the idle position and that there is
free play in the cable. If adjustment is
necessary, loosen the locknuts at the
carburetor end and turn the cable
adjuster. Tighten the locknuts.
1 Cable Wheel
2 Locknuts
3 Throttle Cable
REVERSE GATE
2. Check shifting:
● Reverse gate clearance with shift lever
in Neutral position.
Out of specification ➔ Adjust.
30+ 2MM
Reverse Gate Clearance:
1.18 + 0.05 in (30 + 2mm)
NOZZLE
3-3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
Shift cable inspection and adjustment
2.9 Nm (0.29 kg•m, 2.09 ft-lb)
Shift Cable Adjustment Steps:
a) Remove the four screws holding the
remote control unit cover. Remove the
four screws holding the remote control
unit to the deck. Lift the remote control
unit.
15MM (0.59 IN) MINIMUM
b) Check that shift cable joint has 15mm
(0.6 in) thread engagement at the control
end. Adjust if necessary.
CONTROL END
2.9 Nm (0.29 kg•m, 2.09 ft-lb)
c) Put the shift lever in Neutral. Check that
the shift cable joint at the reverse gate
end has 8mm (0.31 in) thread engagement.
d) Measure the clearance between the
reverse gate and the bottom of the nozzle. If adjustment is necessary, screw the
shift cable joint in or out until adjustment
is correct.
GATE END
WARNING
SHIFTER
ADJUSTER
The cable joints must have more than 8mm
(0.31 in) engagement after adjustment is
complete.
3. Check:
● Mechanical interlock
Shift lever can move when throttle
levers are not in idle position ➔
Replace interlock.
4. Check:
● Neutral switch
Refer to the “STARTING SYSTEM”
section in Chapter 7.
5. Check:
● Friction
Loose/stiff ➔ Adjust the friction control
screw
PORT
ADJUSTER
THROTTLE
BOW
STARBOARD
THROTTLE
ADJUSTER
BOW
NOTE:
The remote control unit must be raised to
adjust the throttle tension screws.
Starboard: 3mm Allen screw at RHS Pivot.
Port: 3mm Allen screw at LHS Pivot.
3-4
PERIODIC INSPECTION AND ADJUSTMENT x
3-5
INSP
ADJ
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
• Valve clearance adjustment should be made
on a cold engine at room temperature.
• When the valve clearance is to be measured
or adjusted, the piston must be at Top Dead
Center (TDC) on the compression stroke.
3-6
PERIODIC INSPECTION AND ADJUSTMENT x
3-7
INSP
ADJ
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
3-8
PERIODIC INSPECTION AND ADJUSTMENT x
INSP
ADJ
Make a note of the position of each valve
lifter 3 and valve pad 4 so they can be
installed in the correct place.
lowing table:
3-9
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
3-10
PERIODIC INSPECTION AND ADJUSTMENT x
3-11
INSP
ADJ
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
CAUTION:
3-12
PERIODIC INSPECTION AND ADJUSTMENT x
INSP
ADJ
Place the craft in water, and then
CAUTION:
3-13
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
If the oil temperature is low, the reading on
the dipstick will be low. If the temperature is
high, the reading on the dipstick will be high.
CAUTION:
Do not run the engine for more than 15 seconds without supplying water when checking the oil level on land. The engine could
overheat.
craft in a horizontal position.
3-14
PERIODIC INSPECTION AND ADJUSTMENT x
CAUTION:
3-15
INSP
ADJ
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
CAUTION:
When starting the engine, make sure the dipstick is securely fitted into the oil tank.
3-16
PERIODIC INSPECTION AND ADJUSTMENT x
INSP
ADJ
CAUTION:
Make sure the air filter element is installed
in the filter case properly.
If cleaning the air filter element, use cold or
lukewarm water and let it air dry completely. Do not use detergent or a solvent to
clean the air filter element, or dry it with
heat or compressed air, otherwise it could
be damaged.
CAUTION:
3-17
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
3-18
PERIODIC INSPECTION AND ADJUSTMENT x
3-19
INSP
ADJ
3
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
A
Clean-out cap 1 by pressing Release
Bottom A and lift the cap out of the Port.
1
Align the grooved recess on the clean-out cap
with the projection in the clean-out opening.
CAUTION:
Be sure the cap is properly positioned and
locked in place. Otherwise, the cap could loosen
and be forced out of the access ports by water
pressure, causing loss of performance and possible damage.
3-20
A
PERIODIC INSPECTION AND ADJUSTMENT x
INSP
ADJ
3
BILGE PUMP
1. Remove inspection cover in pump clean-out
tray.
2. Inspect:
• Bilge strainer
Contaminants → Clean.
Cracks/damage → Replace.
Inspection Steps:
• Install the coupling cover.
Disconnect the bilge strainer from the bilge
strainer holder.
3-21
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
3-22
PERIODIC INSPECTION AND ADJUSTMENT x
INSP
ADJ
3
GENERAL
Drain plug inspection
1. Inspect:
● Drain plug
Crack/Damage ➔ Replace.
● O-Ring
Crack/Wear ➔ Replace.
● Screw threads
Dirt/Sand ➔ Clean.
Greasing points
1. Apply:
● Throttle cable inner wire
● Shift control cable
● Cable joint
● Steering cable
Recommended Grease:
Water resistant grease
NOTE:
Remove the cable joint and apply a small
amount of grease to the following parts.
●
●
Nozzle pivot shaft collar
Bearing housing
Recommended Grease:
Water resistant grease
NOTE:
Fill in the bearing housing with water resistant grease from a nipple.
● Fill the grease slowly and carefully, as it can
damage the hose and the joints.
● Refer to the “MAINTENANCE INTERVAL
CHART” section.
●
3-23
3
INSP
ADJ
PERIODIC INSPECTION AND ADJUSTMENT
Lubrication points
1. Lubricate:
● Throttle cable (throttle body end)
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
NOTE:
Before lubricating the QSTS control cables,
remove the QSTS cable housing cover. Spray
the rust inhibitor into the outer cables, and
apply grease to the inner cables.
2. Lubricate:
● Nozzle pivot shaft
● Steering cable (nozzle end)
● QSTS cable (nozzle end)
Recommended grease:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
3. Lubricate:
● Steering cable
● Steering cable joint
● Shift cable
● Shift cable joint
NOTE:
Disconnect the joints and apply a small amount
of grease.
Recommended grease:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
3-24
PERIODIC INSPECTION AND ADJUSTMENT x
4.
3-25
INSP
ADJ
3
x
CHAPTER 4
FUEL SYSTEM
FUEL TANK AND FUEL PUMP MODULE
EXPLODED DIAGRAM . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART
SERVICE POINTS . . . . . . . . . . . . . . . . .
Fuel hose disconnection . . . . . . . . . .
Fuel pump module removal . . . . . . . .
Check valve inspection . . . . . . . . . . .
Fuel tank inspection . . . . . . . . . . . . .
Fuel hose inspection . . . . . . . . . . . . .
Fuel pump filter inspection . . . . . . . .
Fuel strainer inspection . . . . . . . . . . .
Fuel pump module installation . . . . . .
Fuel hose connect . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4-1
4-1
4-4
4-4
4-4
4-4
4-4
4-4
4-5
4-5
4-5
4-5
FUEL INJECTION SYSTEM
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
SERVICE POINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Hose clamps removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Hose clamps installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Fuel hose disconnection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Fuel line inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Fuel hose installation (replacing with new fuel hose) . . . . . . . . . . . . . . . . . . . . . . 4-17
Fuel hose connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
Throttle body removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
Fuel injector inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Throttle body inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Throttle body installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19
Throttle bodies synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
Fuel pressure measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
FUEL
FUEL SYSTEM x
6
1
3
7
2
5
4.9~7.9 Nm (50~80 kgf-cm)
See Note
4
10
28
8
28
29
28
28
12
28
28
29
11
28
28
9
28
15
13
16
18
14
13
13
17
13
19
30
20
26
27
21
22
23
24
25
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
FUEL TANK PUMP MODULE
Service Points
Follow the “Step” order for removal.
1
2
3
4
5
6
Connector, harness
Cover
Screw, Machine
Clamp
Fuel hose
Screw
2
2
2
2
2
16
7
8
9
10
Plate
Fuel Pump Assembly
Seal
Screw
2
2
2
5
4-1
NOTE: Apply Loctite, torque in 2 steps
see page 4-4 Pump Module Removal,
4-5 Installation
Apply Loctite, 2.9 Nm (30 kgf-cm)
4
4
FUEL
FUEL SYSTEM
FUEL TANK AND FUEL PUMP MODULE (Cont’d.)
6
1
3
7
2
5
4
10
28
8
28
29
28
28
12
28
28
29
11
28
28
9
28
15
13
16
18
14
13
13
17
13
19
30
20
26
27
21
22
Step
11
12
13
14
15
16
17
18
19
20
21
Procedure / Part Name
Fuel Level Sender
Gasket
Clamp
Hose, Vent
Hose, Vent
Valve, Check
Nut
Washer, Star
Washer
Vent, Fuel
Clamp
Q’ty
1
1
4
1
1
1
1
1
1
1
4
22
23
24
25
Hose, Fuel Filler
Nut, #8-32 Nylon Lock
Washer, #8 Flat
Screw, #8-32
1
6
6
6
4-2
23
24
25
Service Points
4.2 Nm (0.42 kgf-m, 3.0 ft-lbs)
See detail on clamp installation
FUEL
FUEL SYSTEM x
4
FUEL TANK AND FUEL PUMP MODULE (Cont’d.)
6
1
3
7
2
5
4
10
28
8
28
29
28
28
12
28
28
29
11
28
28
9
28
15
13
16
18
14
13
13
17
13
19
30
20
26
27
21
22
Step
26
27
Procedure / Part Name
Filler Cap Assembly
Gasket
Q’ty
1
1
FUEL TANK
28
29
30
Screw, Machine 1/4” - 20 x 1”
Fix, Fuel Tank
Fuel Tank Assembly
8
2
1
23
24
25
Service Points
Note: Deck must be cut at outline to
access fuel tank for removal
4.9~7.9 Nm (50~80 kgf-cm)
Reverse the removal steps for installation.
4-3
4
FUEL
FUEL SYSTEM
SYSTEM.”
Screws
Loosen the screws in the sequence shown.
4-4
FUEL SYSTEM x
FUEL
Screws
4.9 Nm (0.49 kgf-m)
7.9 Nm (0.8 kgf-m)
SYSTEM.”
4-5
4
4
FUEL
FUEL SYSTEM
4-6
FUEL SYSTEM x
FUEL INJECTION SYSTEM (Cont’d.)
4-7
FUEL
4
4
FUEL
FUEL SYSTEM
FUEL INJECTION SYSTEM (Cont’d.)
4-8
FUEL SYSTEM x
FUEL INJECTION SYSTEM (Cont’d.)
4-9
FUEL
4
4
FUEL
FUEL SYSTEM
FUEL INJECTION SYSTEM (Cont’d.)
4-10
FUEL SYSTEM x
FUEL INJECTION SYSTEM (Cont’d.)
4-11
FUEL
4
4
FUEL
FUEL SYSTEM
FUEL INJECTION SYSTEM (Cont’d.)
Qty
4-12
FUEL SYSTEM x
FUEL INJECTION SYSTEM (Cont’d.)
4-13
FUEL
4
4
FUEL
FUEL SYSTEM
FUEL INJECTION SYSTEM (Cont’d.)
4-14
FUEL SYSTEM x
CAUTION:
4-15
FUEL
4
4
FUEL
FUEL SYSTEM
CAUTION:
Disconnect the fuel hose 1 directly from the
fuel pipe 2.
4-16
FUEL SYSTEM x
FUEL
4
If free play is not obtained, disconnect the fuel
hose, check the O-ring for damage and that it is
properly installed.
CAUTION:
4-17
4
FUEL
FUEL SYSTEM
CAUTION:
4-18
FUEL SYSTEM x
FUEL
Blow out all passages with compressed air.
CAUTION:
4-19
4
4
FUEL
FUEL SYSTEM
CAUTION:
Only butterfly valve #2 should be fully
closed. The other valves should be halfway
closed.
4-20
FUEL SYSTEM x
4-21
FUEL
4
4
FUEL
FUEL SYSTEM
CAUTION:
4-22
FUEL SYSTEM x
4-23
FUEL
4
4
FUEL
FUEL SYSTEM
4-24
FUEL SYSTEM x
FUEL
“Fuel hose disconnection.”
“Fuel hose connection.”)
nection.”)
connection.”
4-25
4
POWER UNIT x
POWR
Refer to “ENGINE HATCH” in Chapter 8.
5-1
5
5
POWR
POWER UNIT
ENGINE UNIT
EXPLODED DIAGRAM
5-2
POWER UNIT x
5-3
POWR
5
5
POWR
POWER UNIT
CAUTION:
5-4
POWER UNIT x
5-5
POWR
5
5
POWR
POWER UNIT
CAUTION:
5-6
POWER UNIT x
5-7
POWR
5
5
POWR
POWER UNIT
UNIT.”
5-8
POWER UNIT x
EXHAUST PIPE 3 (Cont’d.)
5-9
POWR
5
5
POWR
POWER UNIT
EXHAUST PIPE 3 (Cont’d.)
5-10
POWER UNIT x
PIPE 3.”
MOTOR.”
5-11
POWR
5
5
POWR
POWER UNIT
EXHAUST PIPES 1 AND 2 (Cont’d.)
5-12
POWER UNIT x
POWR
AND 2.”
5-13
5
5
POWR
POWER UNIT
EXHAUST MANIFOLD (Cont’d.)
5-14
POWER UNIT x
UNIT.”
“THERMOSTAT.”
5-15
POWR
5
5
POWR
POWER UNIT
OIL TANK (Cont’d.)
5-16
POWER UNIT x
OIL TANK (Cont’d.)
5-17
POWR
5
5
POWR
POWER UNIT
OIL TANK (Cont’d.)
5-18
POWER UNIT x
OIL TANK (Cont’d.)
5-19
POWR
5
5
POWR
POWER UNIT
OIL TANK (Cont’d.)
5-20
POWER UNIT x
OIL TANK (Cont’d.)
5-21
POWR
5
5
POWR
POWER UNIT
5-22
POWER UNIT x
5-23
POWR
5
5
POWR
POWER UNIT
5-24
POWER UNIT x
5-25
POWR
5
5
POWR
POWER UNIT
TANK.”
5-26
POWER UNIT x
OIL PUMP (Cont’d.)
5-27
POWR
5
5
POWR
POWER UNIT
OIL PUMP (Cont’d.)
5-28
POWER UNIT x
5-29
POWR
5
5
POWR
POWER UNIT
5-30
POWER UNIT x
5-31
POWR
5
5
POWR
POWER UNIT
MOTOR.”
PUMP.”
5-32
POWER UNIT x
REDUCTION DRIVE GEAR (Cont’d.)
5-33
POWR
5
5
POWR
POWER UNIT
REDUCTION DRIVE GEAR (Cont’d.)
5-34
POWER UNIT x
REDUCTION DRIVE GEAR (Cont’d.)
5-35
POWR
5
5
POWR
POWER UNIT
REDUCTION DRIVE GEAR (Cont’d.)
5-36
POWER UNIT x
5-37
POWR
5
5
POWR
POWER UNIT
5-38
POWER UNIT x
UNIT.”
5-39
POWR
5
5
POWR
POWER UNIT
GENERATOR AND STARTER MOTOR (Cont’d.)
5-40
POWER UNIT x
GENERATOR AND STARTER MOTOR (Cont’d.)
5-41
POWR
5
5
POWR
POWER UNIT
GENERATOR AND STARTER MOTOR (Cont’d.)
CAUTION:
Make sure not to pinch the pulser coil
leads between the washers and projections on the case when installing the
bolts.
5-42
POWER UNIT x
GENERATOR AND STARTER MOTOR (Cont’d.)
5-43
POWR
5
5
POWR
POWER UNIT
5-44
POWER UNIT x
5-45
POWR
5
5
POWR
POWER UNIT
CAUTION:
washer. Always replace them with new ones.
5-46
POWER UNIT x
5-47
POWR
5
5
POWR
POWER UNIT
CAMSHAFTS (Cont’d.)
5-48
POWER UNIT x
POWR
CAMSHAFTS (Cont’d.)
GEAR.”
5-49
5
5
POWR
POWER UNIT
CAMSHAFTS (Cont’d.)
5-50
POWER UNIT x
CAMSHAFTS (Cont’d.)
5-51
POWR
5
5
POWR
POWER UNIT
5-52
POWER UNIT x
5-53
POWR
5
5
POWR
POWER UNIT
5-54
POWER UNIT x
5-55
POWR
5
5
POWR
POWER UNIT
CAUTION:
5-56
POWER UNIT x
5-57
POWR
5
5
POWR
POWER UNIT
5-58
POWER UNIT x
POWR
5
Tighten the cylinder head cover bolts in a crisscross pattern.
5-59
5
POWR
POWER UNIT
UNIT.”
PIPE 3.”
AND 2.”
TANK.”
“CAMSHAFTS.”
5-60
POWER UNIT x
CYLINDER HEAD (Cont’d.)
5-61
POWR
5
5
POWR
POWER UNIT
5-62
POWER UNIT x
5-63
POWR
5
5
POWR
POWER UNIT
5-64
POWER UNIT x
HEAD.”
5-65
POWR
5
5
POWR
POWER UNIT
VALVES AND VALVE SPRINGS (Cont’d.)
5-66
POWER UNIT x
5-67
POWR
5
5
POWR
POWER UNIT
5-68
POWER UNIT x
POWR
Before checking the valve guide, make sure
the valve stem diameter is within specification.
5-69
5
5
POWR
POWER UNIT
5-70
POWER UNIT x
5-71
POWR
5
5
POWR
POWER UNIT
5-72
POWER UNIT x
CAUTION:
5-73
POWR
5
5
POWR
POWER UNIT
5-74
POWER UNIT x
CAUTION:
5-75
POWR
5
5
POWR
POWER UNIT
5-76
POWER UNIT x
POWR
UNIT.”
PIPE 3.”
AND 2.”
MANIFOLD.”
MOTOR.”
TANK.”
5-77
5
5
POWR
POWER UNIT
CRANCASE (Cont’d.)
PUMP.”
GEAR.”
“CAMSHAFTS.”
5-78
POWER UNIT x
CRANCASE (Cont’d.)
5-79
POWR
5
5
POWR
POWER UNIT
CRANCASE (Cont’d.)
5-80
POWER UNIT x
CRANCASE (Cont’d.)
“CRANKSHAFT.”
5-81
POWR
5
5
POWR
POWER UNIT
CAUTION:
Tap on one side of the crankcase with a
soft-face hammer. Tap only on reinforced portions of the crankcase, not on
the crankcase mating surfaces. Work
slowly and carefully and make sure the
crankcase halves separate evenly.
5-82
POWER UNIT x
5-83
POWR
5
5
POWR
POWER UNIT
5-84
POWER UNIT x
CAUTION:
5-85
POWR
5
5
POWR
POWER UNIT
5-86
POWER UNIT x
“CRANKCASE.”
5-87
POWR
5
5
POWR
POWER UNIT
CONNECTING RODS AND PISTONS (Cont’d.)
5-88
POWER UNIT x
CAUTION:
5-89
POWR
5
5
POWR
POWER UNIT
pistons:
5-90
POWER UNIT x
formula:
5-91
POWR
5
5
POWR
POWER UNIT
5-92
POWER UNIT x
5-93
POWR
5
5
POWR
POWER UNIT
CAUTION:
5-94
POWER UNIT x
POWR
Lubricate the bolt threads and nut seats
installation.”
removal.”
5-95
5
5
POWR
POWER UNIT
5-96
POWER UNIT x
5-97
POWR
5
5
POWR
POWER UNIT
5-98
POWER UNIT x
POWR
procedure.”
CAUTION:
5-99
5
5
POWR
POWER UNIT
“CRANKCASE.”
PISTONS.”
5-100
POWER UNIT x
5-101
POWR
5
5
POWR
POWER UNIT
CAUTION:
5-102
POWER UNIT x
“CRANKCASE.”
5-103
POWR
5
5
POWR
POWER UNIT
5-104
POWR
POWER UNIT x
FW
5-105
D
5
5
POWR
POWER UNIT
THERMOSTAT (Cont’d.)
FW
5-106
D
POWER UNIT x
POWR
Does not open at 50~60°C (123~
5-107
5
5
POWR
POWER UNIT
MANIFOLD.”
5-108
POWER UNIT x
PRESSURE CONTROL VALVE (Cont’d.)
5-109
POWR
5
5
POWR
POWER UNIT
PRESSURE CONTROL VALVE (Cont’d.)
5-110
POWER UNIT x
PRESSURE CONTROL VALVE (Cont’d.)
5-111
POWR
5
5
POWR
POWER UNIT
5-112
CHAPTER 6
JET PUMP UNIT
INTAKE GRATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
PUMP UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
REVERSE GATE AND DEFLECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
IMPELLER AND DRIVE SHAFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
JET PUMP CLEAN-OUT PORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
INTERMEDIATE SHAFT AND HOUSING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
SERVICE POINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Seal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
JET PUMP x
JET
PUMP
6
INTAKE GRATING
EXPLODED DIAGRAM
5
LT
242
LT
2
4
242
3
LT
242
1
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty (ea)
INTAKE GRATING
REMOVAL
1
2
3
4
5
Screw
Screw
Intake Grating
Screw
Intake Duct
Service Points
Follow the left “Step” order for removal.
2
4
2
12
2
6-1
8 x 35mm
8 x 20mm
Port and Starboard Units
8 x 40mm
Port and Starboard Units
Reverse the removal steps for installation.
NOTE: Apply clear silicone before
installing a duct into the hull.
6
JET
PUMP
JET PUMP
FILL GAPS WITH SILICONE
FILL GAPS WITH SILICONE
Apply clear silicone as shown before installing
Duct into hull. Install Duct and torque screws to
15Nm (1.5m-kg, 11 ft-lb).
6-2
JET PUMP x
JET
PUMP
6
PUMP UNIT
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty (ea.)
PUMP UNIT REMOVAL
1
2
3
4
5
6
7
8
9
Shift Cable Joint
Steering Cable Joint
Bolt (with washer)
Nozzle
Dowel Pin
Duct w/Driveshaft and Impeller
Bolt (with washer)
Dowel Pin
Impeller Housing Assembly
Service Points
Follow the “Step” order for removal.
1
1
4
1
1
2
1
4
2
1
NOTE:
May be left on to remove pump as an
assembly.
10 x 40mm
Reverse the removal steps for installation.
6-3
6
JET
PUMP
JET PUMP
REVERSE GATE AND DEFLECTOR
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty (ea)
REVERSE GATE AND NOZZLE
DEFLECTOR REMOVAL
Service Points
Follow the “Step” order for removal.
1
2
3
4
5
6
Bolt (with washer)
Collar
Reverse Gate
Bolt (with washer)
Collar
Nozzle Deflector
2
2
1
2
2
1
8 x 20mm
1
2
3
4
5
REVERSE GATE
DISASSEMBLY
Bolt (with washer)
Gate Control Arm
Bolt (with washer)
Collar
Swivel
2
1
2
2
1
6 x 16mm
8 x 20mm
Reverse the removal steps for installation.
6-4
JET
PUMP
JET PUMP x
6
IMPELLER AND DRIVE SHAFT
EXPLODED DIAGRAM
DISTINCT MARK
(BY CASTING)
6B5
PART NUMBER
NO MARK
68N
PART NUMBER
NOTE *1: EPNOC AP #0
or equivalent
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty (ea)
IMPELLER DUCT AND DRIVE
SHAFT ASSEMBLY
Service Points
Follow the “Step” order for removal.
1
Impeller, Port
1
2
3
4
Impeller, Starboard
Spacer
Bolt
Cap
1
1
3
1
5
6
7
8
9
10
11
12
13
14
15
O-ring
Nut
Washer
Drive shaft
Rear Bearing
Spacer
Front Bearing
Oil Seal
Oil Seal
Bolts
Cover, O-rings and filter
1
1
1
1
1
1
1
1
1
4
1
17.3° Pitch, 6B5, csting marks on hex
Left-hand threads
16.3° Pitch, 68N, Left-hand threads
Fill cap approximately 1/3 full with
EPNOC AP#0 or equivalent grease.
Not reusable
Not reusable
Not reusable
Not reusable
Reverse the removal steps for installation.
6-5
6
JET
PUMP
JET PUMP
JET PUMP CLEAN-OUT PORTS
EXPLODED DIAGRAM
LT
242
A
REMOVAL AND INSTALLATION CHART
Step Procedure / Part Name
Qty (ea.) Service Points
1
2
JET PUMP CLEAN-OUT
TRAY REMOVAL
Inspection Cover
Clamp, Upper
Follow the “Step” order for removal.
2
2
3
4
5
6
Screw #8
Rubber Cushion
Screw #10
Clean-out Tray
4
4
14
1
7
Hatch Interlock Switch
2
8
9
Clamp, lower
Hose, clean-out
2
2
10
11
12
Packing
Drain Hose
Drain Hose Clamp
1
1
1
Access top hose clamps through inner inspection holes,
loosen both top clamps to remove Clean-out Tray.
Clamp screw heads must be on forward (bow side) of
clean-out Hose and face center of boat (See A).
Apply silicone sealant to outside of clean-out port
flanges.
Set height a = 14mm (0.55”). Apply one (1) drop of
removable thread lock (LT242) to threads.
Do not need to remove unless replacing clean-out hose.
If hose is removed, apply silicone sealant to inside of
hose at bottom, remove sealant from Cap locking
grooves in jet pump clean-out port.
Lift Clean-out Tray to loosen drain hose clamp and
remove drain hose.
13
Cap
2
Leave Caps in place unless jet pump clean out is
required.
NOTE: Follow Cap removal and installation instructions in JET PUMP UNIT INSPECTION,” Chapter 3.
6-6
JET PUMP x
6-7
JET
PUMP
6
6
JET
PUMP
JET PUMP
2
10
11
6-8
JET PUMP x
6-9
JET
PUMP
6
6
JET
PUMP
JET PUMP
6-10
x
CHAPTER 7
ELECTRICAL SYSTEM
ELECTRICAL COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
ELECTRICAL BOX AND IGNITION COIL BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
ELECTRICAL ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Digital Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Low Resistance Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Peak Voltage Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Peak Voltage Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Test Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
IGNITION SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
IGNITION SPARK GAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
IGNITION SYSTEM PEAK VOLTAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
FUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
SPARK PLUGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
SPARK PLUG LEAD ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
IGNITION COIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
ENGINE STOP SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
ENGINE TEMPERATURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21
INTAKE AIR TEMPERATURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21
THERMOSWITCH (ENGINE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22
THERMOSWITCH (EXHAUST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22
MAIN AND FUEL PUMP RELAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23
THROTTLE POSITION SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24
CAM POSITION SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25
INTAKE AIR PRESSURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26
FUEL CONTROL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-28
WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-28
FUEL PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30
FUEL SENDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30
FUEL INJECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31
MAIN AND FUEL PUMP RELAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31
OIL PRESSURE SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31
THERMOSWITCH (ENGINE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31
THERMOSWITCH (EXHAUST) . . . . . . .
SLANT DETECTION SWITCH . . . . . . . .
STARTING SYSTEM . . . . . . . . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . . . . . . . .
BATTERY . . . . . . . . . . . . . . . . . . . . . . .
WIRING CONNECTIONS . . . . . . . . . . . .
FUSE . . . . . . . . . . . . . . . . . . . . . . . . . . .
KEY SWITCH . . . . . . . . . . . . . . . . . . . .
STARTER RELAY . . . . . . . . . . . . . . . . .
STARTING MOTOR . . . . . . . . . . . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART
SERVICE POINTS . . . . . . . . . . . . . . . . .
Armature Inspection . . . . . . . . . . . . .
Brush Holder Inspection . . . . . . . . . .
Starter Motor Front cover Inspection .
CHARGING SYSTEM . . . . . . . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . . . . . . . .
FUSE . . . . . . . . . . . . . . . . . . . . . . . . . . .
BATTERY . . . . . . . . . . . . . . . . . . . . . . .
LIGHTING COIL . . . . . . . . . . . . . . . . . . .
RECTIFIER REGULATOR . . . . . . . . . . .
ELECTRIC BILGE PUMP . . . . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . . . . . . . .
ELECTRIC BILGE PUMP . . . . . . . . . . . .
MAIN COMPONENT LOCATION . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . .
SWITCH LOCATION . . . . . . . . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . . . . . . . .
METER PANEL BACK VIEW . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . . . . . . . .
ELECTRICAL COMPONENTS . . . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART
SWITCH AND COMPONENT . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . . . . . . . . .
KEY SWITCH . . . . . . . . . . . . . . . . . . . .
CIRCUIT BREAKER . . . . . . . . . . . . . . .
PANEL SWITCHES . . . . . . . . . . . . . . . .
BLOWER MOTOR . . . . . . . . . . . . . . . . .
BILGE PUMP . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-31
7-31
7-32
7-32
7-33
7-33
7-33
7-33
7-34
7-35
7-35
7-35
7-38
7-38
7-39
7-39
7-40
7-40
7-41
7-41
7-41
7-41
7-42
7-42
7-43
7-44
7-44
7-45
7-45
7-46
7-46
7-47
7-47
7-47
7-48
7-48
7-49
7-49
7-49
7-50
7-50
ELECTRICAL SYSTEM x
7
ELEC
ELECTRICAL COMPONENTS
17
19
1
16
2
11
3
15
4
14
13
10
5
12
6
22
23
23
18
23
23
20 21
24
7
9
8
1
2
3
4
5
6
7
8
9
23
24
7-1
Bow light
Fuel pumps
Fuel sender
Stereo
Speaker
Running Light
7
ELEC
ELECTRICAL SYSTEM
ELECTRICAL BOX AND IGNITION COIL BOX
EXPLODED DIAGRAM
2
REMOVAL AND INSTALLATION CHART
Step Procedure / Part Name
Qty
ELECTRICAL BOX REMOVAL
1
2
3
4
5
6
7
8
Battery negative lead
Battery positive lead
Bolt
Battery hold down bracket
Battery
Battery tray
Nut
Washer
Service Points
Follow the left “Step” for removal.
1
1
2
1
1
1
4
4
7-2
ELECTRICAL SYSTEM x
ELEC
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
2
REMOVAL AND INSTALLATION CHART
Step Procedure / Part Name
9
10
11
12
13
14
15
16
Bolt
Screw
Terminal cover
Gasket
Screw
Starter motor lead
Bolt
Cover
Qty
4
4
1
1
1
1
3
1
Service Points
Not reusable
7-3
7
7
ELEC
ELECTRICAL SYSTEM
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
2
REMOVAL AND INSTALLATION CHART
Step
17
18
19
20
21
Procedure / Part Name
Gasket
Bolt
Ground led
Holder
Coupler
Q’ty
1
2
2
1
15
Service Points
Not reusable
NOTE: Disconnect all couplers.
Reverse the removal steps for installation.
7-4
ELECTRICAL SYSTEM x
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
7-5
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
7-6
ELECTRICAL SYSTEM x
ELEC
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
Step
19
20
21
22
23
24
25
Procedure / Part Name
Q’ty
Tapping screw
Bracket
Joint connector
Tapping screw
Main and fuel pump relay
Tapping screw
Rectifier/regulator
1
1
2
1
1
2
1
Service Points
Reverse the disassembly steps for assembly.
7-7
7
7
ELEC
ELECTRICAL SYSTEM
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
7-8
ELECTRICAL SYSTEM x
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
EXPLODED DIAGRAM
High tension code
7-9
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
ELECTRICAL BOX AND IGNITION COIL BOX (Cont’d.)
7-10
ELECTRICAL SYSTEM x
ELEC
7
Throughout this chapter, the digital tester’s part
number has been omitted. Refer to the following
part number.
“O O” indicates a continuity of electricity (e.g.,
a closed circuit at the respective switch position).
7-11
7
ELEC
ELECTRICAL SYSTEM
• When checking the condition of the ignition
system, it is vital to know the peak voltage.
• Cranking speed is dependant on many factors
(e.g., fouled or weak spark plugs or a weak
battery). If one of these is defective, the peak
voltage will be lower than specification.
• If the peak voltage measurement is not within
specification, the engine will not operate properly.
• A low peak voltage will also cause components to prematurely wear.
7-12
ELECTRICAL SYSTEM x
ELEC
7
• Throughout this chapter, the peak voltage
adaptor’s part number has been omitted.
Refer to the following part number.
tests:
7-13
7
ELEC
ELECTRICAL SYSTEM
IGNITION SYSTEM
WIRING DIAGRAM
Y
Br
13 : B/R
15 : G/O
17 : L/B
18 : R/Y
19 : P/G
20 : P
21 : B/Y
27 : B
28 : B/W
2 :W
3 : P/W
4 :P
5 : B/Y
6 : B/O
7 :Y
8 :O
9 : W/R
10 : W/B
11 : L/R
B
L/R
1
L
R/Y
R/Y
3
R/Y
R/Y
2
R/Y
R
R
4 3 2 1
8 7 6 5
R
P
R
R
P
Br B
R/Y
R/Y
R/Y
R
O
12 3 456
R/Y
7 8
O O P
P R R R
4
Y
L/R
5
P/W
6
OFF
B
Pu/B
R/Y
Pu/G
P/W
W B
ON
START
B/O
R/B
Pu/R
B
Bu/Y
FREE
PUSH
W
Br
W
B
B/Y
W
G/O
O
P/W
P
P/G
B/Y
B
R/Y
B/O
Pu/B
B
W
B
B/O
B
B/O
Pu/Y
Pu/G
W
7
Pu/R
20
⁄
B/O
G/O
R/Y
B
Br Br
FREE
PUSH
R/B
W
Br
11
⁄
B
R
R/B
Br
Br
B/R
R/Y
Br
P
W
W/R
B
R
P
B/W
P
B
B/O
B/O
R
B/O
W/B
P
P
R
B/O
18
⁄
P
B/W
#1
#4
B
B/O
18
⁄
R
G
R
B/O
B/Y
G
B/O
R/Y
12
⁄
B/O
B/W
W B
R
15
⁄
B
G
B/O
G
B/Y
B/Y
10
⁄
B/Y
B
G
B/Y
B/O
G
B/Y
G
B/W
B/O
G
16
⁄
R
R
P/G
B/W
#2
14
⁄
O
G
G
14
⁄
G
B/O
G
B/O
B/O
B/O
O
17
⁄
18
⁄
19
⁄
13
⁄
P
#3
18
⁄
9
B
B/O
19
⁄
8
B
B/O
B/O
B/O
7-14
7
ELEC
ELECTRICAL SYSTEM x
IGNITION SYSTEM
WIRING DIAGRAM
Y
Br
13 : B/R
15 : G/O
17 : L/B
18 : R/Y
19 : P/G
20 : P
21 : B/Y
27 : B
28 : B/W
2 :W
3 : P/W
4 :P
5 : B/Y
6 : B/O
7 :Y
8 :O
9 : W/R
10 : W/B
11 : L/R
B
L/R
1
L
R/Y
R/Y
3
R/Y
R/Y
2
R/Y
R
R
4 3 2 1
8 7 6 5
R
P
R
R
P
Br B
R/Y
R/Y
R/Y
R
O
12 3 456
R/Y
7 8
O O P
P R R R
4
Y
L/R
5
P/W
6
OFF
B
Pu/B
R/Y
Pu/G
P/W
W B
ON
START
B/O
R/B
Pu/R
B
Bu/Y
FREE
PUSH
W
Br
W
B
B/Y
W
G/O
O
P/W
P
P/G
B/Y
R/Y
B/O
Pu/B
B
B
W
B
B/O
B
B/O
Pu/Y
W
7
Pu/R
20
⁄
Pu/G
B/O
R/Y
B
Br Br
FREE
PUSH
G/O
R/B
W
Br
11
⁄
B
R
R/B
Br
Br
B/R
R/Y
Br
P
W
W/R
B
R
P
B/W
P
B
B/O
B/O
R
B/O
W/B
P
P
R
B/O
18
⁄
P
B/W
#1
#4
B
B/O
18
⁄
R
G
R
B/O
B/Y
G
B/O
12
⁄
B/O
B/W
R/Y
W B
R
15
⁄
B
G
B/O
B/Y
G
B/Y
B/Y
B
G
10
⁄
B/Y
B/O
G
B/Y
G
B/W
B/O
G
16
⁄
R
R
P/G
B/W
#2
14
⁄
O
G
G
14
⁄
G
B/O
G
B/O
B/O
B/O
O
17
⁄
18
⁄
19
⁄
13
⁄
P
#3
18
⁄
9
B
B/O
19
⁄
8
B
B/O
B/O
B/O
7-15
7
ELEC
ELECTRICAL SYSTEM
7-16
ELECTRICAL SYSTEM x
ELEC
7
• If there is no spark or the spark is weak, continue with the ignition system test.
• If a good spark is obtained, the problem is not
with the ignition system but possibly with the
spark plug(-s) or another component.
7-17
7
ELEC
ELECTRICAL SYSTEM
7-18
ELECTRICAL SYSTEM x
ELEC
SYSTEM.”
7-19
7
7
ELEC
ELECTRICAL SYSTEM
measurement.”
Lanyard Clip
7-20
White
Black
Installed
O
O
Removed
O
O
ELECTRICAL SYSTEM x
7-21
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-22
ELECTRICAL SYSTEM x
7-23
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-24
ELECTRICAL SYSTEM x
7-25
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-26
ELECTRICAL SYSTEM x
ELEC
7
FUEL CONTROL SYSTEM
WIRING DIAGRAM
13
6
12
7
9
8
10
11
8
9
10
11
12
6
7
Thermoswitch (exhaust)
Thermoswitch (engine)
13
7-27
Engine temperature sensor
Intake air temperature sensor
Intake air pressure sensor
Throttle position sensor
Fuel injector
Oil pressure switch
7
ELEC
ELECTRICAL SYSTEM
FUEL CONTROL SYSTEM
WIRING DIAGRAM
13
6
12
7
9
8
10
11
7-28
ELECTRICAL SYSTEM x
ELEC
7
Purple
12VDC
FUEL GAUGE, LOW FUEL
LED AND WIRING CHECK
1. Open the fuel hatch and locate the three wire
connector for the Fuel Sensor. Unplug the
sensor's connector and turn the starboard key
to the “ON” position. The gauge should then
read below “EMPTY” and the Low Fuel LED
should be illuminated.
7-29
7
ELEC
ELECTRICAL SYSTEM
FUEL INJECTOR
Refer to “FUEL INJECTION SYSTEM” in
Chapter 4.
2. Put the black lead of a voltmeter on the
Black/White wire of the harness. Then use
the red lead of the voltmeter to measure the
voltage on the other two pins.
MAIN AND FUEL PUMP RELAY
Refer to “IGNITION SYSTEM.”
PURPLE = More than +12 VDC (or close to
Battery terminal voltage)
OIL PRESSURE SWITCH
Refer to “IGNITION SYSTEM.”
PINK = More than +7 VDC (sensor disconnected).
THERMOSWITCH (ENGINE)
Refer to “IGNITION SYSTEM.”
3. If the above voltages are as indicated turn the
key off and insert a jump lead between the
PINK and BLACK/WHITE pins of the harness
connector to ground. Turn the starboard key
on. The gauge should read above the “FULL”
mark.
THERMOSWITCH (EXHAUST)
Refer to “IGNITION SYSTEM.”
4. If the test voltages were incorrect, check continuity of the wire harness between the sensor connector and the corresponding wires at
the back of the fuel gauge. (See Connector
Wiring chart below)
5. If the harness wiring is correct then test the
gauge by connecting a 12VDC power source
to the PURPLE wire connector and jumping
the PINK to BLACK wire connectors to
ground. The gauge needle should read
above the “FULL” mark. If it does not read
above Full, replace the gauge.
CONNECTOR WIRING
Signal
Sender
Harness
Gauge
Positive (12V)
Red
Purple
Purple
Ground
Black
Blk/Wht
Black
Send
White
Pink
Pink
FUEL LEVEL SENSOR/LOW FUEL SWITCH
The Fuel Level Sensor and Low Fuel Switch are
tested by eliminating other causes. Test the
gauge, low fuel LED and wiring as above in the
“Fuel Gauge” section. If the gauge and wiring are
normal then replace the Fuel Sensor.
NOTE: If the Fuel Gauge reads “FULL” on a partially full tank (less than 3/4 full) then the problem
may be due to collected water in bottom of the
tank. Inspect the tank, drain and clean if water is
found.
7-30
ELEC
ELECTRICAL SYSTEM x
STARTING SYSTEM
WIRING DIAGRAM
Br
Y
B
L/R
L
R
4 3 2 1
8 7 6 5
1
R/Y
R/Y
R/Y
R/Y
2
R
R
R/Y
P
P
O
R/Y
12 3 456 7 8
7
R/Y
18
R/Y
R
R R
Y
3
R
B
B
Br
B
B
B
B
Br
4
B
R
8
7
OFF
ON
START
W
B
5
Br Br
SET
PULL
B
Br
6
R/B
Br
R/B
R
Br
Br
R
7-31
7
7
ELEC
ELECTRICAL SYSTEM
KEY SWITCH
1. Check:
• Continuity
Out of specification → Replace.
Start continuity
Brown
Red/Black
White
OFF
ON
O
O
START
O
O
Black
Purple
O
O
O
1. Disconnect switch at harness.
2. Turn key to function to be checked.
3. Check continuity between the indicated wire
leads.
No continuity → Replace switch assembly.
7-32
ELECTRICAL SYSTEM x
7-33
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-34
ELECTRICAL SYSTEM x
STARTER MOTOR (Cont’d.)
7-35
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
STARTER MOTOR (Cont’d.)
7-36
ELECTRICAL SYSTEM x
7-37
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-38
ELECTRICAL SYSTEM x
7-39
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
SYSTEM.”
SYSTEM.”
SYSTEM.”
7-40
ELECTRICAL SYSTEM x
ELECTRIC BILGE PUMP
WIRING DIAGRAM
Br
Br
Br
Br
B
B
B
B: Black
Br: Brown
7-41
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-42
ELECTRICAL SYSTEM x
ELEC
MAIN COMPONENT LOCATION
EXPLODED DIAGRAM
3
8
11
7
1
2
5
4
6
9
10
1. Battery
2. Fuel Level Sensor
3. Bow Light
4. Stern Light Connector
5. Blower Motors
6. Bilge Pump
7. Horn
8. Stereo Unit
9. Hull Harness #3
10. Deck Harness
11. 12V Outlet and Circuit Breaker
7-43
7
7
ELEC
ELECTRICAL SYSTEM
SWITCH LOCATION
WIRING DIAGRAM
1
2
4
3
5
1. Key Switches
2. Lanyard Switch
3. Neutral Switch
4. Hatch Interlock Switches
5. Engine Harness #2
7-44
3 Port Tach
4 Fuel Gauge
MOUNT USING
4 SCREWS (BLACK)
F
TO IPA
PWR 2
GND 1
DEUTSCH
2 PIN 10 AWG
CAP 52769
WEDGE 52770
PIN 52767
BLACK -41" 10 AWG
RED/BLACK -39" 10 AWG
18467
3
6
STB TACH
STB LO OIL
3
6
-
5A
ORG -4"
HORN
52268
53089
RD/BLK -4"
10 AWG
ORG -4"
ORG -4"
BLACK -41" 10 AWG
SMALL
WEEP HOLE
52519 5
RED
WHITE
YELLOW
PURPLE
GREEN
BLUE
BLACK
LIGHTS
52267
52329
5A
S
1
4
2
3
RD/BLK -4"
10 AWG
5A
BLUE -22"
STEREO
52265
51342
B+
ORANGE -24"
RD/BLK -4"
10 AWG
5A
I
FUEL
53107
RED -21"
RD/BLK -4"
10 AWG
BILGE
52264
51342
5A
PINK -9"
51078
3 1 2 4 5 6
BLOWER
52263
51342
RD/BLK -4"
10 AWG
5A
5A
BLUE -5"
BLUE -8"
3 1 2 4 5 6
BLK -4" 10 AWG
BLUE -9"
PLUG 52506
WEDGE 52508
SOC 52518
DEUTSCH
6 PIN
CAP 52505
WEDGE 52507
PIN52517
PURPLE -9"
S
G
BLK -5"
9495
MALE
SPEEDO
53106
BLUE -4"
4
5251
FEMALE
BLK
BLK -4" 10 AWG
RED/PURPLE -22" 14 AWG
YELLOW -21"
CT LT
52266
51342
BLK -4" 10 AWG BLK -4" 10 AWG
5 52519
2 STB TACH GND 2
8 STB CHECK ENG. 8
7 STB OVERHEAT 7
4
STB LIGHT
4
GRAY/GREEN -23"
RED -6"
STB TACH PWR 2
GRAY -6"
STB TACH 1
BLUE/WHITE -6"
STB LO OIL 4
TAN/WHITE -6"
STB OVERHEAT 5
BLUE -6"
STB CHECK ENG. 6
BLACK -6"
STB TACH GND 3
BLUE -9"
TO HARNESS
GRAY/BLUE -23"
PURPLE -9"
ST
ORG -4"
BLK
-9"
PINK
BLK -20" 14 AWG
DEUTSCH
6 PIN
PLUG 52506
WEDGE 52508
SOC 52518
BLUE -22"
BLUE -9"
GND
RED/BLK -5" 10 AWG
8 PIN DEUTSCH
PLUG 52510
CAP
WEDGE 52512
SOC. 52518
RED -6"
1 STB TACH PWR 1
BLUE -9"
ORG -4"
BLK -21"
RED/BLK -4"
10 AWG
+12V
BRN -19"
BLUE -4"
G
BLK -19" 14 AWG
L
5251 9495
FEMALE MALE
COPPER
COMPASS
53232
ON
START
BLOWER
#1
#2
+12V
SW
OFF
ON
START
PINK -20"
5 FUEL
PURPLE -20"
10 IGNITION
YELLOW -18" 14 AWG
8 BLOWER 2
YELLOW -18" 14 AWG
7 BLOWER 1
BROWN -19"
4 BILGE
BLUE -22"
11 CTSY LT
GRAY/BLUE -23"
1 STERN
GRAY/GREEN -23"
3 BOW
ORANGE -24"
2 HORN
52519 12 52519 9 52519 6 -
1
4
2
18275
S
3
PORT
TACH
53105
52519
BLACK
BLUE
GREEN
PURPLE
YELLOW
WHITE
RED
GND
DEUTSCH
12 PIN
CAP 52513
WEDGE 52515
PIN 52517
TO IPA
6 PIN
CAP 5211
SEAL 52014
PIN 52024
B
MOUNT USING
4 STUDS
#20888B
5
5 52519
STBD
53051
MOUNT USING
4 STUDS
#20888B
-
SI
PI
DEUTSCH
6 PIN
CAP 52505
WEDGE 52507
PIN52517
BLACK -6"
BLUE -6"
TAN/WHITE -6"
7 PORT OVERHEAT 7
BLUE/WHITE -6"
6 PORT LO OIL
6
GRAY -6"
3
3
PORT TACH
BLUE -14"
4
4
PORT LIGHT
RED -6"
1 PORT TACH PWR 1
2 PORT TACH GND 2
8 PORT CHECK ENG. 8
8 PIN DEUTSCH
CAP
PLUG 52510
WEDGE 52512
SOC. 52518
DEUTSCH 1 2 3 4 5 6
6 PIN
CAP 52505
WEDGE 52507
PIN52517
BILGE STEREO CSTY. LT
LIGHTS HORN
TO STEREO
HARNESS
18274
3 GROUND
2 12V REC. GND
5 STEREO PWR
6 CT LT
1 12V REC. PWR
4 STEREO REMOTE
PLACE BLOWER
WARNING HERE
BLACK -19" 14 AWG
BLACK -20" 14 AWG
RED -21"
BLUE -22"
RED/PURPLE -22" 14 AWG
YELLOW -21"
OFF
THRU-BOLT
FOR RADIO REMOTE
BLACK -8"
5251
9495
MALE FEMALE
BLUE -5"
52519
STB
TACH
53105
ORG -4"
51078
BLUE -14"
BLACK -4"
BLACK -5"
52519
BLACK -5"
BLACK -5"
52519
LIGHTS
GROUND
IGNITION
FUEL
52519
PURPLE -20"
PINK -20"
SILVER
SW
BROWN
RED
WHITE
BLACK
YELLOW/RED
3
PORT
53051
TO HARNESS
DEUTSCH
6 PIN
PLUG 52506
WEDGE 52508
SOC. 52518
1 2 3 4 5 6
PT
3 PORT TACH GND
6 PORT CHECK ENG.
5 PORT OVERHEAT
4 PORT LO OIL
1 PORT TACH
2 PORT TACH PWR
52519
2
52519
STBD START
STBD PWR START
STBD START
STBD STOP GND
STBD IGN.
-
7-45
BROWN
RED
WHITE
BLACK
YELLOW/RED
1 Starboard Tach
2 Speedometer
PORT START
PORT PWR START
PORT START
PORT STOP GND
PORT IGN.
-
1
ELECTRICAL SYSTEM x
ELEC
METER PANEL BACK VIEW
WIRING DIAGRAM
7
7
ELEC
ELECTRICAL SYSTEM
ELECTRICAL COMPONENTS
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Qty (ea.)
METER PANEL DISASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Cover, Steering Wheel
Nut w/Washer
Steering Wheel
Woodruff Key
Nut
Key Switch
Screw
Nut w/Washer
Meter Panel
Speedometer
Fuel Gauge
Tachometer
Nut
Breaker
Nut
Controller, Stereo
Service Points
Follow the “Step” order for removal.
1
1
1
1
2
2
3
3
1
1
1
2
7
7
2
1
#8 x 3/4” PTH
#8 x 32 Hex
Reverse the removal steps for installation.
7-46
ELECTRICAL SYSTEM x
SWITCH AND COMPONENT
WIRING DIAGRAM
1 Circuit Breaker
8 Stereo
2 Stereo Switch
9 Courtesy Lead
3 Courtesy Light Switch
10
10
4 Navigation Light Switch
11 Bilge Pump
11
5 Bilge Pump Switch
12 Horn
12
6 Blower Switch
13 Stern Light
13
7 Horn Switch
14 Bow Light
14
7-47
Blower Motors
ELEC
7
7
ELEC
ELECTRICAL SYSTEM
7-48
ELECTRICAL SYSTEM x
7-49
ELEC
7
CHAPTER 8
HULL AND DECK
ENGINE COMPARTMENT LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
VENTILATION SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COOLING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-2
8-2
8-3
8-4
8-4
8-5
STEERING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
REMOTE CONTROL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
ENGINE HATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
HATCH FITTINGS/BOW COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
SEAT FITTINGS . . . . . . . . . . . . . . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART
DECK FITTINGS . . . . . . . . . . . . . . . . . . . . . . . .
EXPLODED DIAGRAM . . . . . . . . . . . . .
REMOVAL AND INSTALLATION CHART
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-14
8-14
8-15
8-16
8-16
8-17
THROUGH HULL AND DRAIN FITTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23
GUNWALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
REMOVAL AND INSTALLATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
HULL CONSTRUCTION AND CARE
FRP . . . . . . . . . . . . . . . . . . . .
WHAT IS FRP? . . . . . . . . . . .
CHARACTERISTICS OF FRP
MAINTENANCE OF FRP . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-25
8-25
8-25
8-25
8-25
HULL
DECK
HULL AND DECK x
ENGINE COMPARTMENT LAYOUT
EXPLODED DIAGRAM
4
1
5
6
2
7
3
1. Engine
2. Water Lock
3. Jet Pump
4. Fuel Tank
5. Battery
6. Blowers
7. Bilge Pump
8-1
8
8
HULL
DECK
HULL AND DECK
VENTILATION SYSTEM
EXPLODED DIAGRAM
8-2
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
VENTILATION SYSTEM
DISASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Hose Clamp
Screw, Oval Head Tapping
Ventilator (White)
Ventilator (Black)
Hose, Ventilation
Hose, Ventilation
Hose, Ventilation
Screw, Truss Head Tapping
Blower Assembly
Ventilator
Band
Hose, Ventilation 2
Joint, Drain
Clamp, Cable
Service Points
Follow the “Step” order for removal.
11
28
5
2
3
2
1
4
2
2
4
2
2
5
Snap type
Intake 36”
Exhaust 24”
Reverse the removal steps for installation.
8-3
8
HULL
DECK
HULL AND DECK
COOLING SYSTEM
EXPLODED DIAGRAM
25
28
28
27
27
29
29
30
30
8-4
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
COOLING SYSTEM AND
WATER LOCK REMOVAL
Service Points
Follow the “Step” order for removal.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Band, Hose 18
Clip
Hose 1
Joint, Hose 1
Clip
Nut
Cap, 1
Joint Assy
Band, Hose 18
Clip
Hose (L=1250)
Clip
Band, Hose 18
Hose (L=900)
Floor, Drain
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
16
17
18
19
20
21
22
23
24
Clip
Housing, Thermostat
Band, Hose
Hose 8
Joint, Pipe
Clip
Hose
Nut, M14-1.5mm
Pilot, Water
2
2
6
2
2
2
2
4
4
25
26
Band, Hose
Clean-out Tray Assembly
1
1
27
28
29
30
Band, Hose
Hose, Exhaust Outlet
Strap
Water Lock
2
1
2
1
8-5
Apply clear silicone around the flange of
the fitting.
Oetiker type clamps.
Straight connector for Port pilot water hose.
STARBOARD hose is shortened to fit.
Apply clear silicone around the flange of
the water pilots.
Located in engine compartment
See pg. 6-6 “Jet Pump Clean-out
Tray RemovaL
Apply soapy water to inside of hose ends
on reassembly so that hoses seat
completely on Water Lock
8
HULL
DECK
HULL AND DECK
STEERING SYSTEM
EXPLODED DIAGRAM
9
A
12
11
7
10
8
A
SS
1
22
33
44
A
6
SS
5
13
NOTE: See REMOVAL AND INSTALLATION CHART
on next page for torque specs and locking agent
instructions.
8-6
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty Service Points
STEERING HELM REMOVAL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Cover
Nut
Washer
Steering Wheel
Key
Boot
Screw
Helm, Bezel
Screw, socket head
Screw
Steering Pivot
Nut
Washer
Bolt
Bearing
Bolt, Shoulder
Bearing
Bolt
Washer
Steering Master
Nut
Washer
Hex Head Bolt
Steering Mount
1
2
3
4
STEERING CABLE
Nut w/Washer
Block, Pivot Arm
Screw
Connector Sub-Assembly
Follow the “Step” order for removal.
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
3
3
1
3
3
3
1
2
1
2
1
Cleanout Tray
Nut
4
6
7
8
9
Washer
Clip
Washer
Pin
Bushing, Nylon
Nut
Steering Clevis
Steering Cables
4
2
2
2
4
2
2
2
11
12
13
#8 x 1", 1.8 Nm (0.18 m-kg, 1.3 ft-lb)
3/16"-24 x 1", LT 242
3/8" Nylon lock, 20 Nm (2.0 m-kg, 14 ft-lb)
3/8"
1/4"-20, shoulder bolt, 6.4 Nm (0.64 m-kg, 4.6 ft-lb)
1/4"-20, 14 Nm (1.4 m-kg, 10 ft-lb), LT 242
1/4"-20 Nylon lock, 7 Nm (0.7 m-kg, 5 ft-lb)
1/4" fender
1/4"-20
12 Nm (1.2 m-kg, 8.7 ft-lb), LT 242
3.7 Nm (0.37 m-kg, 2.7 ft-lb)
Refer to "Jet Pump Clean-Out Ports" in Chapter 6.
5
10
1/2"-13, Nylon lock, 18 Nm (1.8 m-kg, 13 ft-lb)
1/2"
33 Nm (3.3 m-kg, 24 ft-lb),
1 drop LT 242 on threads
Seal with Silicone sealer on inside of hull
3.5 Nm (0.35 m-kg, 2.5 ft-lb)
17 Nm (1.7 m-kg, 12 ft-lb)
Reverse the removal steps for installation.
8-7
8
HULL
DECK
HULL AND DECK
REMOTE CONTROL SYSTEM
EXPLODED DIAGRAM
8-8
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
Service Points
REMOTE CONTROL UNIT
REMOVAL
1
2
3
4
5
6
7
8
9
10
11
12
Throttle Lever Plugs (red)
Shift Lever Plugs (black)
Screw, Oval Head
Cover, Remote Control
Screw, Flat Head
Clevis Pin
Screw, Plate
Nut
Plate, Retaining
Remote Control Assembly
Screw
Switch, Neutral
13
14
15
16
17
18
CABLE REMOVAL
Clevis Assembly
Nut
Nut
Cable, Throttle
Shaft Joint Ball
Nut
Follow the “Step” order for removal.
2 sets
1 set
4
1
4
4
2
1
2
1
1
1
Screws face starboard
Screws face starboard
4
4
2
2
2
2
Clean-out Tray
Refer to “JET PUMP CLEAN-OUT PORTS”
in Chapter 6.
19
20
Thru-hull Fitting
Cable, Shift
2
2
21
22
23
24
REMOTE CONTROL UNIT
MOUNT PLATES
Nut, #10-24 Nylon Lock
Washer, #10 Flat
Screw, #10-24
Plate, Remote Control
4
4
4
2
Reverse the removal steps for installation.
8-9
8
HULL
DECK
HULL AND DECK
ENGINE HATCH
EXPLODED DIAGRAM
8-10
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
ENGINE HATCH REMOVAL
AND DISASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Support, Engine Hatch
Nut, #10-24 Nylon Lock
Washer, 310 Fender 3/4” O.D.
Screw #10-24 x 1”
Bracket, Support
Nut, 1/4-20 Nylon Lock
Washer, Fender 1/4”
Screw 1/4-20 x 1-3/4”
Engine Hatch Assembly
Nut, 1/4-20 Nylon Lock
Washer, Fender 1/4”
Screw 1/4-20 x 1-3/4”
Hinge, Engine Hatch
Nut, #10-24 Nylon Lock
Washer, #10 Fender 3/4” O.D.
Screw, #10-20 x 2.5”
Base, hatch Support
Nut, 1/4-20 Nylon Lock
Washer, 1/4”
Screw, 1/4-20 x 1-3/4”
Seat Lock Assembly
Nut, #10-24 Nylon Lock
Washer, 7/16” Fender 1-1/2” O.D.
Washer, Special Cotton
Pin
Service Points
Follow the “Step” order for removal.
2
4
4
4
2
6
6
6
1
6
6
6
2
6
6
6
2
4
4
4
2
2
4
2
2
Support Hatch Lid before removal.
Reverse the removal steps for installation.
8-11
8
HULL
DECK
HULL AND DECK
HATCH FITTINGS/BOW COVER
EXPLODED DIAGRAM
8-12
HULL
DECK
HULL AND DECK x
8
REMOVAL AND INSTALLATION CHART
Step Procedure / Part Name
BOW LOCKER
DISASSEMBLY
Q’ty
1
2
3
4
5
6
7
8
9
10
11
12
Screw, Tapping
Hinge
Hatch
Screw, Machine
Latch
Screw, Tapping
Catch
Screw
Cushion
Screw
Screw
Hatch Support
16
1
1
2
1
2
1
2
2
1
1
1
13
14
15
Screw
Anchor Retainer Bracket
Anchor Retainer
6
2
2
Service Points
Follow the “Step”
order for removal.
Step Procedure / Part Name
GLOVEBOX HATCH
37
38
39
#8 x 5/8”
Screw
Hinge
Bi-Fold Door Assembly
Screw
Catch
Screw
U-Channel
Edge Guard 1/2” x 3/8”
40
41
42
43
44
45
46
47
48
49
#8 x 3/4”
#10 x 1/2”
#8 x 3/4”
Twist one turn
when re-attaching
28
1
1
4
3
5
1
1
#6 X 3/4”
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
#8 x 5/8”
#8 x 3/4”
Re-install with hot
melt adhesive
Screw
10
Door Assembly, Console 1
#8 X 5/8”
SKI LOCKER HATCH
66
26
27
28
29
30
31
32
33
34
35
36
3
3
1
#10 X 3/4”
10-24
Screw
Hinge, Fuel Hatch
Nut, Nylon Lock
Washer, Flat
Screw
Catch
Screw, Machine
Latch
Seal, Fuel Hatch
Hatch, Fuel Hatch
12
2
2
2
2
1
2
2
1
1
#8 x 3/8”
#10-24
#10
10-24 x 1-1/4”
STERN LOCKER
HATCHES
STARBOARD
CONSOLE DOOR
24
25
Service Points
FUEL HATCH
BI-FOLD DOOR
16
17
18
19
20
21
22
23
Screw
Nut
Glovebox Hatch Assem.
Q’ty
Screw
6
Support, Ski Hatch
1
Screw
12
Hinge
2
Hatch Assem., Ski Hatch 1
Screw, Machine
2
Latch
1
Screw
2
Catch
1
Screw
5
Cushion
5
Support, Locker hatch
Screw
Bracket
Screw, Machine
Lock Assembly
Nut, Nylon Lock
Washer, Flat
Catch
Screw
Nut, Nylon Lock
Washer, Flat
Screw
Bracket
Screw, #10-24 x 1.5”
Screw
Hinge,Stern
Locker Hatch
Packing, 4
2
4
2
4
2
4
4
2
2
2
2
2
5
1
6
#10 x 1/2”
#10-24
#10 7/16” O.D.
#10-24x1.0”
1/4-20
1/4-Flat
1/4-20x1”
Starboard only
#10 x 3/4”
2
2
CLEANOUT HATCH
#8 x 3/4”
67
68
69
70
71
72
73
#8 x 5/8”
#8 x 3/4”
Hatch
Screw
Screw
Hinge, Cleanout Hatch
Machine Screw
Lock Asembly
Hatch, Cleanout
1
14
12
1
2
1
1
#10 x 1/2”
#10 x 3/4”
Reverse the
removal steps
for installation.
8-13
8
HULL
DECK
HULL AND DECK
SEAT FITTINGS
EXPLODED DIAGRAM
8-14
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
SEAT FITTING DISASSEMBLY
Service Points
Follow the “Step” order for removal.
DRIVER’S BUCKET SEATS
1
2
3
4
5
6
Screw, 1/4-20 x 1/2"
Washer, Flat 1/4 x 1" Fender
Driver Seat Assembly
Seat Slider
Screw, 1/4-20 x 1 1/4"
Pedestal Base
8
8
2
2
12
2
BOW SEATS
7
8
9
10
Seat Cushions
Nut 1/4-20
Washer, Flat 1/4 x 1 1/2" Fender
Bow Seat Backrests
3
24
24
3
Access nuts through under seat storage
Lift backrests off mounting clips
MIDSHIP SEATING
11
12
13
14
Seat Cushions
Nut 1/4-20
Washer, Flat 1/4 x 1 1/2" Fender
Seat Backrests
2
4
4
2
Access nuts through under seat storage
Lift backrests off mounting clips
ENGINE HATCH SEATS
15
16
17
18
19
20
21
22
23
24
25
Nut 1/4-20
Lock Washer 1/4-20
Washer, Flat 1/4 x 1 1/2" Fender
Seat Cushions
Nut 1/4-20
Lock Washer 1/4-20
Washer, Flat 1/4 x 1 1/2" Fender
Backrest
Screw, Tapping
Hinge
Folding Backrest
4
4
4
3
4
4
4
2
8
1
1
Open engine hatch
18
18
4
Access nuts through stern port and
starboard hatch inspection covers
SWIM PLATFORM PADS
26
27
28
Nut 1/4-20
Washer, Flat 1/4 x 1 1/2" Fender
Backrest Pads
Reverse the removal steps for installation.
8-15
8
HULL
DECK
HULL AND DECK
DECK FITTINGS
EXPLODED DIAGRAM
8-16
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
1
2
3
4
5
6
Procedure / Part Name
STERN LIGHT
Stern Light Assembly
Lens
Bulb
Screw, Tapping
Socket Assembly
Collar (Shim)
7
8
9
10
11
12
BOW LIGHT
Screw, Tapping
Cover
Lens
Bulb
Screw
Socket Assembly
1
1
1
1
3
1
13
14
15
16
17
18
19
20
21
22
23
24
25
DECK FITTINGS
Screw, #8 X 3/4”
Handle, Grip
Nut, 5/16-18
Washer, Lock 5/16”
Washer, Flat 5/16”
Cleat
Nut, 5/16-18
Washer, Lock 5/16”
Washer, Flat 5/16”
Rail, Hand (Bow)
Nut, 5/16-18
Washer, Lock 5/16”
Washer, Flat 5/16”
24
6
12
12
12
6
4
4
4
2
4
4
6
26
27
28
29
30
31
32
33
34
35
36
37
38
Q’ty
1
1
1
3
1
1
Grip Assembly, Ski Tow
Bolt, M8 x 35mm HH
Washer, M8 Flat
Ladder, Transom
Screw (w/ nut & washer)
Band
Screw, #8 x 5/8” PPH
Clamp
Clamp, Cable
(Tiewrap, 6”)
Tube (Speedometer)
Screw, #8 X 3/4” PPH
Speedometer Sensor
1
4
4
1
1
1
1
1
Bow and Stern Eyes
(w/ nuts and plates)
3
1
1
3
1
Service Points
Follow the “Step” order for removal.
ML1004 obtain locally
Position so that Stern Light angles towards stern.
Drawing F1C-U268B-00
Festoon 12V 8W, obtain locally
Apply silicone sealer to mounting holes
LT242,Torque 13 Nm (1.35m-kg. 9.5ft-lb)
Silicone sealer in cleat mount holes.
LT242, Torque 13Nm (1.35m-kg, 9.5 ft-lb)
LT242, Torque 13Nm (1.35m-kg, 9.5ft-lb)
Washers are placed on center 2 studs of the Grip Ass’y,
Ski Tow before installing on hull. The remaining 4 washers
are placed on all 4 studs after inserting thru holes in hull.
Silicone sealer around base of studs.
LT242, Torque 17Nm (1.7 m-kg, 12 ft-lb)
Attaches Band to Ladder
Silicone sealer on back side of speedo sensor and in
the 3 mounting holes in hull
Torque 15Nm (1.5m-kg, 11 ft-lb)
Apply silicone sealer to mounting surfaces.
8-17
8
HULL
DECK
HULL AND DECK
DECK FITTINGS
(Continued)
EXPLODED DIAGRAM
Step
39
40
41
42
43
44
45
46
47
Procedure / Part Name
TABLE
Table
Stanchion (Table Post)
Short, Swim Deck
Stanchion (Table Post)
Long, Cockpit
Screw 1/4-20 x 1-3/4”
POH
Nut, 1/4-20 Nylon Lock
Washer, 1/4” x 1” OD
Fender
Table Mount
ANCHOR ROPE
RETAINER
Screw, #10 X 1-1/2”
POH
Bracket
Q’ty
Service Points
1
Optional Accy
1
330mm, 13 in, Optional Accy
1
622mm, 24.5 in, Optional Accy
12
12
Torque 8Nm (0.8m-kg, 6 ft-lb)
12
2
Silicon sealer around bolt holes and mount opening in
deck.
6
2
8-18
HULL AND DECK x
REMOVAL AND INSTALLATION CHART (Continued)
Step
48
49
50
51
52
53
54
55
56
57
Procedure / Part Name
BIMINI TOP BRACKETS
Nut, 10-24 Nylon Lock
Washer, 10 x 3/4” OD
Screw, 10-24 x 1-1/2”
POH
Bracket, Awning (front)
Screw, 10-24 x 1” POH
Bracket, Awning 2 (rear)
Nut, #8-32 Nylon Lock
Washer, #10 x 3/4” OD
Screw, #8-32 x 1” POH
Eye, Strap
Q’ty
8
8
4
2
4
2
4
4
4
2
Service Points
Torque 4Nm (0.4m-kg, 3 ft-lb)
Torque 3Nm (0.3m-kg, 2 ft-lb)
8-19
HULL
DECK
8
8
HULL
DECK
HULL AND DECK
DECK FITTINGS
(Continued)
EXPLODED DIAGRAM
8-20
HULL AND DECK x
REMOVAL AND INSTALLATION CHART (Continued)
Step Procedure / Part Name
Q’ty
WINDSHIELD
58 Nut, 10-24 Nylon Lock
4
59 Washer, #10 Flat
4
60 Screw, 10-24 x 2” PPH
4
61 Screw, #8 x 3/8” PPHType B
4
62 Windshield Brace
2
63 Windshield Trim
64 Screw, #8 x 3/4” POH
14
65 Nut, 8-32 Nylon Lock
8
66 Washer, #8 Flat
8
67 Screw, 8-32 x 2” POH
2
68 Screw, 8-32 x 1-1/2 POH 6
69 Windshield Assembly
1
70 Pad, Windshield
1
71 Windshield Tie-down
1
Service Points
Torque 4Nm (0.4m-kg, 3 ft-lb)
Remove to access screws
Torque 3Nm (0.3m-kg, 2 ft-lb)
8-21
HULL
DECK
8
8
HULL
DECK
HULL AND DECK
THROUGH HULL AND DRAIN FITTINGS
EXPLODED DIAGRAM
Qty 3 for Bilge Hose
8-22
HULL AND DECK x
HULL
DECK
8
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
THROUGH HULL AND DRAIN
FITTINGS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Drain Plug
Screw #8 x 3/4 POH
Clamp, Hose 2 (SAE #24)
Cockpit Drain
Scupper Drain for Cockpit
Pipe, Bilge (Hose, 1 1/2" X 72")
Clamp, Hose 2 (SAE #24)
Ski Hatch Drain
5/16" Worm Gear Clamp
Hose, Drain
Thru Hull Fitting
Hose, Drain
Joint Drain - Y Fitting
Fuel Tank Compartment Drain
Hose, Drain
Cleanout Tray Drain
Hose, Drain
Hose, Drain
Drain Outlet
Clamp, Cable (Tiewrap 8")
Screw, #8 x 5/8" PPH
Drink Holder
Bilge Pump
5/16" Worm Gear Clamp
Bilge Outlet
Hose,1 (3/4" x 48" Bilge Hose)
Screw, #10 x 1/2 PPH
3/4" Through Hull (90°)
5/16" Worm Gear Clamp
Hose, Drain, 11.5"
Service Points
Follow the “Step” order for removal.
1
3
1
1
1
1
1
1
12
2
1
1
1
1
1
1
1
1
1
8
8
7
1
2
1
1
2
2
2
1
8-23
Apply silicone to the drain plug assy flange.
Apply clear silicone to the base.
Apply clear silicone to the base.
Apply clear silicone to the base.
Apply clear silicone to the base.
Apply clear silicone to the base.
Apply clear silicone to the base.
Apply clear silicone to the base.
Apply clear silicone to the base.
8
HULL
DECK
HULL AND DECK
GUNWALE
EXPLODED DIAGRAM
1
2
4
3
5
REMOVAL AND INSTALLATION CHART
Step
Procedure / Part Name
Q’ty
GUNWALE
Service Points
Follow the “Step” order for removal.
1
2
Screw, 310 x 2” POH
Cover, rub Rail Joint
2
1
3
Inner Gunwale (Rubrail insert)
1 pc
4
5
Screw, #10 x 1-1/4” PFH
Gunwale (Rubrail)
210
1 pc
8-24
Torque 2 Nm (0.2m-kg, 1.5 ft-lb)
Before installing, apply silicone to the join
area.
Heat in warm water for installation and
gunwale indent area with a hair dryer or
low temperature heat gun.
Torque 2 Nm (0.2m-kg, 1.5 ft-lb)
Fill in any gaps above or below the
gunwale with white silicone.
Reverse the removal steps for installation.
HULL AND DECK x
8
1. Maintenance of luster
The gelcoat layer is 0.3 to 0.5mm (0.12 to
0.20 in) thick. When it has faded or has lost
its luster, the original luster can be restored
by polishing to remove the oxidized layer.
HULL CONSTRUCTION
AND CARE
The SRT1000 hull is built of a material called
FRP. This is then finished with a very hard
product called gelcoat to protect the fiberglass
and provide a durable finish.
Polishing procedures:
a. Clean the gelcoat surface with water
and neutral detergent.
b. Polish with a fine rubbing compound. If
no polisher is available, polish with a
rag and compound.
c. After polishing, apply several coats of a
good marine wax, allowing each coat to
dry prior to buffing and applying the
next coat.
WHAT IS FRP?
FRP stands for Fiberglass Reinforced Plastic.
It is a composite material in which a fiberglass
reinforcement material such as chopped strand
mat (mat) and/or a woven fabric (cloth) is
impregnated with a catalyzed polyester resin
and allowed to cure into a rigid state. Also,
included in this definition are fabrics impregnated with epoxy resins and hardeners.
2. Fading and discoloration
How to clean:
a. Fading may require the use of a heavy
duty rubbing compound and subsequent polishing to restore the original
gelcoat luster. If this does not work, see
item “d” below.
b. Discoloration due to oil stains, fuel
stains, or environmental factors may be
removed with detergents or industrial
solvents if needed. A rag or sponge
moistened with acetone may also help.
However, avoid excessive exposure of
gelcoat to acetone as the surface may
become permanently damaged.
c. Marine growth can be scraped off using
sharpened wooden sticks. Avoid metal
putty knives, etc. as they will tend to
scratch the gelcoat.
d. If all else fails, use a wet/dry sandpaper
to color sand the gelcoat down to
consistent color. Use extreme care as
too much sanding will remove all the
gelcoat and new gelcoat will have to be
applied. Start with #600 grit and end
with #1200 to #1500 grit with lots of
water. For best results, final sanding
should always be in the same directions (e.g., back and forth). Follow with
polishing procedures given above.
e. If none of the above helps, it is time to
re-gelcoat.
CHARACTERISTICS OF FRP
FRP has the following characteristics:
1.
2.
3.
4.
HULL
DECK
High strength yet light-weight
Excellent malleability
Corrosion free
Easy to care for and easy to repair. On the
other hand, it is liable to get scratched and
is vulnerable to shocks and, therefore,
must be handled with care.
NOTE: Should any of the FRP or Gelcoat
require repair, refer to the Basic Hull Repair
Video and Workbook (VID-10660-00-43).
MAINTENANCE OF FRP
Routine care is important for FRP as it helps in
maintaining the high luster. During maintenance, any damage to the FRP can be detected early so repairs can be easily accomplished
ensuring long service life.
After use, wash down the hull with fresh water.
Wax the hull with a non-abrasive wax such as
Yamaha Ultra-gloss Cleaner Wax or other wax
designed for marine gelcoat.
Take the following additional steps when necessary:
8-25
TROUBLE ANALYSIS x
®
®
TRBL
ANLS
®
WINDOWS 95, WINDOWS 98, WINDOWS ME,
®
®
®
WINDOWS 2000, OR WINDOWS XP .......................................... 9-3
UPDATING THE DATABASE ............................................................ 9-7
ENGINE MONITOR.................................................................................... 9-26
Operating procedure............................................................................ 9-27
9
Operating procedure............................................................................ 9-41
Data display item selection.................................................................. 9-42
Operating procedure............................................................................ 9-42
TRBL
ANLS
TROUBLE ANALYSIS x
®
®
®
®
9
If this software is run on Microsoft Windows 95, Windows 98, Windows Me, Windows 2000, or
®
Windows XP, the information can be displayed in colorful graphics. Also, the software can be operated using either a mouse or a keyboard.
1
2
9-1
3
4
5
9
TRBL
ANLS
TROUBLE ANALYSIS
Make sure your computer meets the following requirements before using this software.
RS232C (Dsub-9 pin) port, USB portj
9-2
TRBL
ANLS
TROUBLE ANALYSIS x
INSTALLING THE YAMAHA DIAGNOSTIC SYSTEM UNDER WINDOWS 95,
WINDOWS 98, WINDOWS ME, WINDOWS 2000, OR WINDOWS XP
9-2.
9-3
9
9
TRBL
ANLS
TROUBLE ANALYSIS
9-4
TROUBLE ANALYSIS x
9-5
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
Install the Database file before using the Yamaha Diagnostic System, otherwise, the program will not
operate correctly. For installation procedures, refer to “UPDATING THE DATABASE” on the next page.
9-6
TROUBLE ANALYSIS x
TRBL
ANLS
9
After about three seconds, the display will automatically go to the first menu display, or you can click
or press any key to go to the first menu. (See fig. 12.)
9-7
9
TRBL
ANLS
TROUBLE ANALYSIS
Do not click the Starting service tool [Enter] button or press the Enter key on your keyboard until
the database has been updated, otherwise, the program will not operate correctly.
9-8
TROUBLE ANALYSIS x
9-9
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
When the database is updated, a confirmation screen is displayed.
9-10
TROUBLE ANALYSIS x
9-11
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
1
2
9-12
TROUBLE ANALYSIS x
TRBL
ANLS
9
Open the Yamaha Diagnostic System window. (Fig. 20) After about three seconds, the display will
automatically go to the first menu, or click or press any key to go to the first menu. (See fig. 21.)
9-13
9
TRBL
ANLS
TROUBLE ANALYSIS
9-14
TROUBLE ANALYSIS x
9-15
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
Eight commands appear in the main Menu. Select a command in any of the following three ways:
9-16
TROUBLE ANALYSIS x
9-17
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
9-18
TROUBLE ANALYSIS x
top.
9-19
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
9-20
TROUBLE ANALYSIS x
9-21
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
9-22
TROUBLE ANALYSIS x
.
9-23
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
Check that the items deleted are normal in the Diagnosis Record. If the items remain irregular, they
will appear as irregular in the Diagnosis Record. Even if you try to delete them, they are undeletable.
9-24
TROUBLE ANALYSIS x
TRBL
ANLS
9
Click the OK button or press the Enter key on your keyboard (Fig. 35): The selected item is deleted.
To cancel deleting the item, click the Cancel button or press the Esc key on your keyboard.
9-25
9
TRBL
ANLS
TROUBLE ANALYSIS
Do not use the Engine Monitor function to check the engine condition while operating a watercraft, otherwise, you could become distracted which could result in a collision.
display.
9-26
TROUBLE ANALYSIS x
TRBL
ANLS
in the scroll bar or press the up or down
keyboard
(Fig. 38).
9-27
9
9
TRBL
ANLS
TROUBLE ANALYSIS
Avoid clicking the Execute and Cancel buttons repeatedly, otherwise, the ECM or PC will not
work properly and they could be damaged.
item.
test.
9-28
TROUBLE ANALYSIS x
keys on your keyboard (Fig. 39).
(Spark Gap Tester YM-34487/90890-06754) is needed.
keyboard (Fig. 39).
9-29
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
keyboard (Fig. 42).
9-30
TROUBLE ANALYSIS x
TRBL
ANLS
If the engine is running an error message is displayed, follow the instructions that appear (Fig. 44).
instructions in the messages that are displayed (see Fig. 43).
instructions that appear in the error message (Fig. 45).
To stop the stationary test, click the Cancel button (see Fig. 43).
9-31
9
9
TRBL
ANLS
TROUBLE ANALYSIS
selected (Fig. 46).
displayed (Fig. 47).
9-32
TROUBLE ANALYSIS x
TRBL
ANLS
9
keyboard (Fig. 48).
Make sure that there is fuel in the fuel tank, otherwise, an error will occur and the test cannot be performed.
keyboard (Fig. 48).
9-33
9
TRBL
ANLS
TROUBLE ANALYSIS
keyboard (Fig. 49).
9-34
TROUBLE ANALYSIS x
TRBL
ANLS
9
selected (Fig. 51).
CAUTION:
Do not test the same cylinder three or more times, otherwise, the spark plug insulator could be
damaged.
Make sure there is fuel in the fuel tank, otherwise, an error will occur and the test cannot be performed.
9-35
9
TRBL
ANLS
TROUBLE ANALYSIS
Select the test to be performed, then click the Select button or press the Enter key on your keyboard
(Fig. 52).
Make sure the engine is not running.
9-36
TROUBLE ANALYSIS x
keyboard (Fig. 53).
selected (Fig. 54).
9-37
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
Avoid clicking the Execute and Cancel buttons repeatedly, otherwise, the ECM or PC will not
work properly and they could be damaged.
9-38
TROUBLE ANALYSIS x
TRBL
ANLS
9
For the first ten seconds, operate all four cylinders, then stop one cylinder for five seconds. For the last
five seconds, operate all four cylinders.
keyboard (Fig. 55).
keyboard (Fig. 55).
keyboard (Fig. 56).
9-39
9
TRBL
ANLS
TROUBLE ANALYSIS
If the engine is not running, an error message is displayed. Follow the instructions that appear (Fig. 57).
displayed (Fig. 56).
appear (Fig. 58).
9-40
TROUBLE ANALYSIS x
TRBL
ANLS
board (Fig. 59).
Press the Enter key on your keyboard. The window of the selected item is displayed
(Fig. 59).
9-41
9
9
TRBL
ANLS
TROUBLE ANALYSIS
bar (Fig. 60).
displayed (See fig. 61).
9-42
TROUBLE ANALYSIS x
TRBL
ANLS
axis (Fig. 61).
value at the time the Enter key on your keyboard was pressed in the Monitor item selection.
9-43
9
9
TRBL
ANLS
TROUBLE ANALYSIS
(Fig. 62).
Although the engine is running, the displayed time refers to the added hours until the Data logger
starts.
9-44
TROUBLE ANALYSIS x
TRBL
ANLS
displayed (Fig. 63).
9-45
9
9
TRBL
ANLS
TROUBLE ANALYSIS
(Fig. 65).
9-46
TROUBLE ANALYSIS x
Programs (Fig. 66).
(Fig. 67).
9-47
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
button (see Figs. 68~70).
9-48
TROUBLE ANALYSIS x
9-49
TRBL
ANLS
9
9
TRBL
ANLS
TROUBLE ANALYSIS
test,
9-50
TROUBLE ANALYSIS x
TRBL
ANLS
.
Display (Fig. 73).
slider (Fig. 74).
9-51
9
9
TRBL
ANLS
TROUBLE ANALYSIS
button (see Figs. 75~76).
9-52
TROUBLE ANALYSIS x
TRBL
ANLS
consulted:
9-53
9
9
TRBL
ANLS
TROUBLE ANALYSIS
9-54
TROUBLE ANALYSIS x
9-55
TRBL
ANLS
9
LIT-18616-02-52
©2003 YAMAHA MOTOR CORPORATION, U.S.A.
Printed in U.S.A.