HP ProLiant Generation ML310 Specifications

HP ProLiant ML310 Generation 5 Server
Maintenance and Service Guide
Part Number 450223-004
August 2008 (Fourth Edition)
© Copyright 2007, 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft, Windows, and Windows Server are U.S. registered trademarks of Microsoft Corporation.
Intel, Celeron, Core, Pentium, and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and
other countries.
Intended audience
This guide is for an experienced service technician. HP assumes you are qualified in the servicing of
computer equipment and trained in recognizing hazards in products with hazardous energy levels and
are familiar with weight and stability precautions for rack installations.
Contents
Customer self repair ...................................................................................................................... 5
Parts only warranty service ......................................................................................................................... 5
Illustrated parts catalog ............................................................................................................... 16
Mechanical components........................................................................................................................... 16
System components ................................................................................................................................. 19
Removal and replacement procedures ........................................................................................... 24
Required tools......................................................................................................................................... 24
Safety considerations ............................................................................................................................... 24
Preventing electrostatic discharge .................................................................................................... 24
Server warnings and cautions ......................................................................................................... 24
Rack warnings .............................................................................................................................. 25
Preparation procedures ............................................................................................................................ 26
Power down the server ................................................................................................................... 26
Remove the server from the rack ...................................................................................................... 26
Unlock the bezel ........................................................................................................................... 27
Bezel ..................................................................................................................................................... 27
Access panel .......................................................................................................................................... 28
Bezel blank ............................................................................................................................................ 28
Media bay blank .................................................................................................................................... 29
Hard drive blank ..................................................................................................................................... 30
Hard drives ............................................................................................................................................ 30
Power button/LED cable........................................................................................................................... 31
Temperature sensor ................................................................................................................................. 32
Front USB connectors ............................................................................................................................... 33
USB diskette drive ................................................................................................................................... 33
Diskette drive .......................................................................................................................................... 34
SATA optical drive .................................................................................................................................. 34
Full-height tape drive................................................................................................................................ 35
USB tape drive........................................................................................................................................ 36
Hard drive cage and hard drive backplane ................................................................................................ 37
Rear fan and fan holder ........................................................................................................................... 38
System air baffle and PCI card guide ......................................................................................................... 39
PCI fan .................................................................................................................................................. 39
Non-redundant power supply.................................................................................................................... 40
Hot-plug power supply ............................................................................................................................. 41
Redundant power supply backplane assembly ............................................................................................ 41
DIMM .................................................................................................................................................... 42
Heatsink................................................................................................................................................. 43
Processor ............................................................................................................................................... 45
Expansion boards ................................................................................................................................... 50
PCI-X extender board ............................................................................................................................... 50
Battery ................................................................................................................................................... 51
System board ......................................................................................................................................... 52
Server feet.............................................................................................................................................. 58
Contents 3
Cabling ..................................................................................................................................... 59
Server cabling ........................................................................................................................................ 59
SATA hard drive cabling .......................................................................................................................... 60
SAS hard drive cabling ............................................................................................................................ 60
Diagnostic tools .......................................................................................................................... 61
Troubleshooting resources ........................................................................................................................ 61
HP Insight Diagnostics.............................................................................................................................. 61
HP Insight Diagnostics survey functionality .................................................................................................. 61
Integrated Management Log ..................................................................................................................... 62
ROMPaq disaster recovery ....................................................................................................................... 62
Component identification ............................................................................................................. 63
Front panel components ........................................................................................................................... 63
Front panel LEDs and buttons .................................................................................................................... 64
SAS and SATA device numbers................................................................................................................. 65
Hot-plug SATA or SAS hard drive LEDs ...................................................................................................... 65
Rear panel components............................................................................................................................ 66
Rear panel LEDs ...................................................................................................................................... 67
System board components........................................................................................................................ 68
System maintenance switch............................................................................................................. 69
NMI functionality........................................................................................................................... 70
System board LEDs .................................................................................................................................. 71
System LEDs and internal health LED combinations....................................................................................... 72
PCI-X extender board components ............................................................................................................. 73
Fan locations .......................................................................................................................................... 73
Specifications ............................................................................................................................. 74
Environmental specifications ..................................................................................................................... 74
Server specifications ................................................................................................................................ 74
Acronyms and abbreviations........................................................................................................ 76
Index......................................................................................................................................... 78
Contents 4
Customer self repair
HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow
for greater flexibility in performing defective parts replacement. If during the diagnosis period HP (or HP
service providers or service partners) identifies that the repair can be accomplished by the use of a CSR
part, HP will ship that part directly to you for replacement. There are two categories of CSR parts:
•
Mandatory—Parts for which customer self repair is mandatory. If you request HP to replace these
parts, you will be charged for the travel and labor costs of this service.
•
Optional—Parts for which customer self repair is optional. These parts are also designed for
customer self repair. If, however, you require that HP replace them for you, there may or may not be
additional charges, depending on the type of warranty service designated for your product.
NOTE: Some HP parts are not designed for customer self repair. In order to satisfy the customer
warranty, HP requires that an authorized service provider replace the part. These parts are identified as
"No" in the Illustrated Parts Catalog.
Based on availability and where geography permits, CSR parts will be shipped for next business day
delivery. Same day or four-hour delivery may be offered at an additional charge where geography
permits. If assistance is required, you can call the HP Technical Support Center and a technician will help
you over the telephone. HP specifies in the materials shipped with a replacement CSR part whether a
defective part must be returned to HP. In cases where it is required to return the defective part to HP, you
must ship the defective part back to HP within a defined period of time, normally five (5) business days.
The defective part must be returned with the associated documentation in the provided shipping material.
Failure to return the defective part may result in HP billing you for the replacement. With a customer self
repair, HP will pay all shipping and part return costs and determine the courier/carrier to be used.
For more information about HP's Customer Self Repair program, contact your local service provider. For
the North American program, refer to the HP website (http://www.hp.com/go/selfrepair).
Parts only warranty service
Your HP Limited Warranty may include a parts only warranty service. Under the terms of parts only
warranty service, HP will provide replacement parts free of charge.
For parts only warranty service, CSR part replacement is mandatory. If you request HP to replace these
parts, you will be charged for the travel and labor costs of this service.
Réparation par le client (CSR)
Les produits HP comportent de nombreuses pièces CSR (Customer Self Repair = réparation par le client)
afin de minimiser les délais de réparation et faciliter le remplacement des pièces défectueuses. Si pendant
la période de diagnostic, HP (ou ses partenaires ou mainteneurs agréés) détermine que la réparation peut
être effectuée à l'aide d'une pièce CSR, HP vous l'envoie directement. Il existe deux catégories de pièces
CSR:
Customer self repair 5
•
Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à
HP de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront
facturés.
•
Facultatif - Pièces pour lesquelles la réparation par le client est facultative. Ces pièces sont
également conçues pour permettre au client d'effectuer lui-même la réparation. Toutefois, si vous
demandez à HP de remplacer ces pièces, l'intervention peut ou non vous être facturée, selon le type
de garantie applicable à votre produit.
REMARQUE: Certaines pièces HP ne sont pas conçues pour permettre au client d'effectuer lui-même la
réparation. Pour que la garantie puisse s'appliquer, HP exige que le remplacement de la pièce soit
effectué par un Mainteneur Agréé. Ces pièces sont identifiées par la mention "Non" dans le Catalogue
illustré.
Les pièces CSR sont livrées le jour ouvré suivant, dans la limite des stocks disponibles et selon votre
situation géographique. Si votre situation géographique le permet et que vous demandez une livraison le
jour même ou dans les 4 heures, celle-ci vous sera facturée. Pour bénéficier d'une assistance
téléphonique, appelez le Centre d'assistance technique HP. Dans les documents envoyés avec la pièce de
rechange CSR, HP précise s'il est nécessaire de lui retourner la pièce défectueuse. Si c'est le cas, vous
devez le faire dans le délai indiqué, généralement cinq (5) jours ouvrés. La pièce et sa documentation
doivent être retournées dans l'emballage fourni. Si vous ne retournez pas la pièce défectueuse, HP se
réserve le droit de vous facturer les coûts de remplacement. Dans le cas d'une pièce CSR, HP supporte
l'ensemble des frais d'expédition et de retour, et détermine la société de courses ou le transporteur à
utiliser.
Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus
d'informations sur ce programme en Amérique du Nord, consultez le site Web HP
(http://www.hp.com/go/selfrepair).
Service de garantie "pièces seules"
Votre garantie limitée HP peut inclure un service de garantie "pièces seules". Dans ce cas, les pièces de
rechange fournies par HP ne sont pas facturées.
Dans le cadre de ce service, la réparation des pièces CSR par le client est obligatoire. Si vous demandez
à HP de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront facturés.
Riparazione da parte del cliente
Per abbreviare i tempi di riparazione e garantire una maggiore flessibilità nella sostituzione di parti
difettose, i prodotti HP sono realizzati con numerosi componenti che possono essere riparati direttamente
dal cliente (CSR, Customer Self Repair). Se in fase di diagnostica HP (o un centro di servizi o di
assistenza HP) identifica il guasto come riparabile mediante un ricambio CSR, HP lo spedirà direttamente
al cliente per la sostituzione. Vi sono due categorie di parti CSR:
•
Obbligatorie – Parti che devono essere necessariamente riparate dal cliente. Se il cliente ne affida
la riparazione ad HP, deve sostenere le spese di spedizione e di manodopera per il servizio.
•
Opzionali – Parti la cui riparazione da parte del cliente è facoltativa. Si tratta comunque di
componenti progettati per questo scopo. Se tuttavia il cliente ne richiede la sostituzione ad HP,
potrebbe dover sostenere spese addizionali a seconda del tipo di garanzia previsto per il prodotto.
Customer self repair 6
NOTA: alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare
la garanzia, HP richiede che queste parti siano sostituite da un centro di assistenza autorizzato. Tali parti
sono identificate da un "No" nel Catalogo illustrato dei componenti.
In base alla disponibilità e alla località geografica, le parti CSR vengono spedite con consegna entro il
giorno lavorativo seguente. La consegna nel giorno stesso o entro quattro ore è offerta con un
supplemento di costo solo in alcune zone. In caso di necessità si può richiedere l'assistenza telefonica di
un addetto del centro di supporto tecnico HP. Nel materiale fornito con una parte di ricambio CSR, HP
specifica se il cliente deve restituire dei componenti. Qualora sia richiesta la resa ad HP del componente
difettoso, lo si deve spedire ad HP entro un determinato periodo di tempo, generalmente cinque (5) giorni
lavorativi. Il componente difettoso deve essere restituito con la documentazione associata nell'imballo di
spedizione fornito. La mancata restituzione del componente può comportare la fatturazione del ricambio
da parte di HP. Nel caso di riparazione da parte del cliente, HP sostiene tutte le spese di spedizione e
resa e sceglie il corriere/vettore da utilizzare.
Per ulteriori informazioni sul programma CSR di HP contattare il centro di assistenza di zona. Per il
programma in Nord America fare riferimento al sito Web HP (http://www.hp.com/go/selfrepair).
Servizio di garanzia per i soli componenti
La garanzia limitata HP può includere un servizio di garanzia per i soli componenti. Nei termini di
garanzia del servizio per i soli componenti, HP fornirà gratuitamente le parti di ricambio.
Per il servizio di garanzia per i soli componenti è obbligatoria la formula CSR che prevede la riparazione
da parte del cliente. Se il cliente invece richiede la sostituzione ad HP, dovrà sostenere le spese di
spedizione e di manodopera per il servizio.
Customer Self Repair
HP Produkte enthalten viele CSR-Teile (Customer Self Repair), um Reparaturzeiten zu minimieren und
höhere Flexibilität beim Austausch defekter Bauteile zu ermöglichen. Wenn HP (oder ein HP
Servicepartner) bei der Diagnose feststellt, dass das Produkt mithilfe eines CSR-Teils repariert werden
kann, sendet Ihnen HP dieses Bauteil zum Austausch direkt zu. CSR-Teile werden in zwei Kategorien
unterteilt:
•
Zwingend – Teile, für die das Customer Self Repair-Verfahren zwingend vorgegeben ist. Wenn Sie
den Austausch dieser Teile von HP vornehmen lassen, werden Ihnen die Anfahrt- und Arbeitskosten
für diesen Service berechnet.
•
Optional – Teile, für die das Customer Self Repair-Verfahren optional ist. Diese Teile sind auch für
Customer Self Repair ausgelegt. Wenn Sie jedoch den Austausch dieser Teile von HP vornehmen
lassen möchten, können bei diesem Service je nach den für Ihr Produkt vorgesehenen
Garantiebedingungen zusätzliche Kosten anfallen.
HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des
Kunden zu erfüllen, muss das Teil von einem HP Servicepartner ersetzt werden. Im illustrierten Teilekatalog
sind diese Teile mit „No“ bzw. „Nein“ gekennzeichnet.
CSR-Teile werden abhängig von der Verfügbarkeit und vom Lieferziel am folgenden Geschäftstag
geliefert. Für bestimmte Standorte ist eine Lieferung am selben Tag oder innerhalb von vier Stunden gegen
einen Aufpreis verfügbar. Wenn Sie Hilfe benötigen, können Sie das HP technische Support Center
Customer self repair 7
anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSRErsatzteil geliefert werden, können Sie entnehmen, ob das defekte Teil an HP zurückgeschickt werden
muss. Wenn es erforderlich ist, das defekte Teil an HP zurückzuschicken, müssen Sie dies innerhalb eines
vorgegebenen Zeitraums tun, in der Regel innerhalb von fünf (5) Geschäftstagen. Das defekte Teil muss
mit der zugehörigen Dokumentation in der Verpackung zurückgeschickt werden, die im Lieferumfang
enthalten ist. Wenn Sie das defekte Teil nicht zurückschicken, kann HP Ihnen das Ersatzteil in Rechnung
stellen. Im Falle von Customer Self Repair kommt HP für alle Kosten für die Lieferung und Rücksendung auf
und bestimmt den Kurier-/Frachtdienst.
Weitere Informationen über das HP Customer Self Repair Programm erhalten Sie von Ihrem Servicepartner
vor Ort. Informationen über das CSR-Programm in Nordamerika finden Sie auf der HP Website unter
(http://www.hp.com/go/selfrepair).
Parts-only Warranty Service (Garantieservice
ausschließlich für Teile)
Ihre HP Garantie umfasst möglicherweise einen Parts-only Warranty Service (Garantieservice
ausschließlich für Teile). Gemäß den Bestimmungen des Parts-only Warranty Service stellt HP Ersatzteile
kostenlos zur Verfügung.
Für den Parts-only Warranty Service ist das CSR-Verfahren zwingend vorgegeben. Wenn Sie den
Austausch dieser Teile von HP vornehmen lassen, werden Ihnen die Anfahrt- und Arbeitskosten für diesen
Service berechnet.
Reparaciones del propio cliente
Los productos de HP incluyen muchos componentes que el propio usuario puede reemplazar (Customer
Self Repair, CSR) para minimizar el tiempo de reparación y ofrecer una mayor flexibilidad a la hora de
realizar sustituciones de componentes defectuosos. Si, durante la fase de diagnóstico, HP (o los
proveedores o socios de servicio de HP) identifica que una reparación puede llevarse a cabo mediante el
uso de un componente CSR, HP le enviará dicho componente directamente para que realice su
sustitución. Los componentes CSR se clasifican en dos categorías:
•
Obligatorio: componentes para los que la reparación por parte del usuario es obligatoria. Si
solicita a HP que realice la sustitución de estos componentes, tendrá que hacerse cargo de los
gastos de desplazamiento y de mano de obra de dicho servicio.
•
Opcional: componentes para los que la reparación por parte del usuario es opcional. Estos
componentes también están diseñados para que puedan ser reparados por el usuario. Sin embargo,
si precisa que HP realice su sustitución, puede o no conllevar costes adicionales, dependiendo del
tipo de servicio de garantía correspondiente al producto.
NOTA: Algunos componentes no están diseñados para que puedan ser reparados por el usuario. Para
que el usuario haga valer su garantía, HP pone como condición que un proveedor de servicios
autorizado realice la sustitución de estos componentes. Dichos componentes se identifican con la palabra
"No" en el catálogo ilustrado de componentes.
Según la disponibilidad y la situación geográfica, los componentes CSR se enviarán para que lleguen a
su destino al siguiente día laborable. Si la situación geográfica lo permite, se puede solicitar la entrega
en el mismo día o en cuatro horas con un coste adicional. Si precisa asistencia técnica, puede llamar al
Customer self repair 8
Centro de asistencia técnica de HP y recibirá ayuda telefónica por parte de un técnico. Con el envío de
materiales para la sustitución de componentes CSR, HP especificará si los componentes defectuosos
deberán devolverse a HP. En aquellos casos en los que sea necesario devolver algún componente a HP,
deberá hacerlo en el periodo de tiempo especificado, normalmente cinco días laborables. Los
componentes defectuosos deberán devolverse con toda la documentación relacionada y con el embalaje
de envío. Si no enviara el componente defectuoso requerido, HP podrá cobrarle por el de sustitución. En
el caso de todas sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío
y devolución de componentes y escogerá la empresa de transporte que se utilice para dicho servicio.
Para obtener más información acerca del programa de Reparaciones del propio cliente de HP, póngase
en contacto con su proveedor de servicios local. Si está interesado en el programa para Norteamérica,
visite la página web de HP siguiente (http://www.hp.com/go/selfrepair).
Servicio de garantía exclusivo de componentes
La garantía limitada de HP puede que incluya un servicio de garantía exclusivo de componentes. Según
las condiciones de este servicio exclusivo de componentes, HP le facilitará los componentes de repuesto
sin cargo adicional alguno.
Para este servicio de garantía exclusivo de componentes, es obligatoria la sustitución de componentes
por parte del usuario (CSR). Si solicita a HP que realice la sustitución de estos componentes, tendrá que
hacerse cargo de los gastos de desplazamiento y de mano de obra de dicho servicio.
Customer Self Repair
Veel onderdelen in HP producten zijn door de klant zelf te repareren, waardoor de reparatieduur tot een
minimum beperkt kan blijven en de flexibiliteit in het vervangen van defecte onderdelen groter is. Deze
onderdelen worden CSR-onderdelen (Customer Self Repair) genoemd. Als HP (of een HP Service Partner)
bij de diagnose vaststelt dat de reparatie kan worden uitgevoerd met een CSR-onderdeel, verzendt HP
dat onderdeel rechtstreeks naar u, zodat u het defecte onderdeel daarmee kunt vervangen. Er zijn twee
categorieën CSR-onderdelen:
•
Verplicht: Onderdelen waarvoor reparatie door de klant verplicht is. Als u HP verzoekt deze
onderdelen voor u te vervangen, worden u voor deze service reiskosten en arbeidsloon in rekening
gebracht.
•
Optioneel: Onderdelen waarvoor reparatie door de klant optioneel is. Ook deze onderdelen zijn
ontworpen voor reparatie door de klant. Als u echter HP verzoekt deze onderdelen voor u te
vervangen, kunnen daarvoor extra kosten in rekening worden gebracht, afhankelijk van het type
garantieservice voor het product.
OPMERKING: Sommige HP onderdelen zijn niet ontwikkeld voor reparatie door de klant. In verband
met de garantievoorwaarden moet het onderdeel door een geautoriseerde Service Partner worden
vervangen. Deze onderdelen worden in de geïllustreerde onderdelencatalogus aangemerkt met "Nee".
Afhankelijk van de leverbaarheid en de locatie worden CSR-onderdelen verzonden voor levering op de
eerstvolgende werkdag. Levering op dezelfde dag of binnen vier uur kan tegen meerkosten worden
aangeboden, indien dit mogelijk is gezien de locatie. Indien assistentie gewenst is, belt u een HP Service
Partner om via de telefoon technische ondersteuning te ontvangen. HP vermeldt in de documentatie bij het
vervangende CSR-onderdeel of het defecte onderdeel aan HP moet worden geretourneerd. Als het defecte
onderdeel aan HP moet worden teruggezonden, moet u het defecte onderdeel binnen een bepaalde
Customer self repair 9
periode, gewoonlijk vijf (5) werkdagen, retourneren aan HP. Het defecte onderdeel moet met de
bijbehorende documentatie worden geretourneerd in het meegeleverde verpakkingsmateriaal. Als u het
defecte onderdeel niet terugzendt, kan HP u voor het vervangende onderdeel kosten in rekening brengen.
Bij reparatie door de klant betaalt HP alle verzendkosten voor het vervangende en geretourneerde
onderdeel en kiest HP zelf welke koerier/transportonderneming hiervoor wordt gebruikt.
Neem contact op met een Service Partner voor meer informatie over het Customer Self Repair programma
van HP. Informatie over Service Partners vindt u op de HP website (http://www.hp.com/go/selfrepair).
Garantieservice "Parts Only"
Het is mogelijk dat de HP garantie alleen de garantieservice "Parts Only" omvat. Volgens de bepalingen
van de Parts Only garantieservice zal HP kosteloos vervangende onderdelen ter beschikking stellen.
Voor de Parts Only garantieservice is vervanging door CSR-onderdelen verplicht. Als u HP verzoekt deze
onderdelen voor u te vervangen, worden u voor deze service reiskosten en arbeidsloon in rekening
gebracht.
Reparo feito pelo cliente
Os produtos da HP são projetados com muitas peças para reparo feito pelo cliente (CSR) de modo a
minimizar o tempo de reparo e permitir maior flexibilidade na substituição de peças com defeito. Se,
durante o período de diagnóstico, a HP (ou fornecedores/parceiros de serviço da HP) concluir que o
reparo pode ser efetuado pelo uso de uma peça CSR, a peça de reposição será enviada diretamente ao
cliente. Existem duas categorias de peças CSR:
•
Obrigatória – Peças cujo reparo feito pelo cliente é obrigatório. Se desejar que a HP substitua
essas peças, serão cobradas as despesas de transporte e mão-de-obra do serviço.
•
Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas
para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a
cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto.
OBSERVAÇÃO: Algumas peças da HP não são projetadas para o reparo feito pelo cliente. A fim de
cumprir a garantia do cliente, a HP exige que um técnico autorizado substitua a peça. Essas peças estão
identificadas com a marca "No" (Não), no catálogo de peças ilustrado.
Conforme a disponibilidade e o local geográfico, as peças CSR serão enviadas no primeiro dia útil após
o pedido. Onde as condições geográficas permitirem, a entrega no mesmo dia ou em quatro horas pode
ser feita mediante uma taxa adicional. Se precisar de auxílio, entre em contato com o Centro de suporte
técnico da HP para que um técnico o ajude por telefone. A HP especifica nos materiais fornecidos com a
peça CSR de reposição se a peça com defeito deve ser devolvida à HP. Nos casos em que isso for
necessário, é preciso enviar a peça com defeito à HP dentro do período determinado, normalmente
cinco (5) dias úteis. A peça com defeito deve ser enviada com a documentação correspondente no
material de transporte fornecido. Caso não o faça, a HP poderá cobrar a reposição. Para as peças de
reparo feito pelo cliente, a HP paga todas as despesas de transporte e de devolução da peça e
determina a transportadora/serviço postal a ser utilizado.
Para obter mais informações sobre o programa de reparo feito pelo cliente da HP, entre em contato com
o fornecedor de serviços local. Para o programa norte-americano, visite o site da HP
(http://www.hp.com/go/selfrepair).
Customer self repair 10
Serviço de garantia apenas para peças
A garantia limitada da HP pode incluir um serviço de garantia apenas para peças. Segundo os termos
do serviço de garantia apenas para peças, a HP fornece as peças de reposição sem cobrar nenhuma
taxa.
No caso desse serviço, a substituição de peças CSR é obrigatória. Se desejar que a HP substitua essas
peças, serão cobradas as despesas de transporte e mão-de-obra do serviço.
Customer self repair 11
Customer self repair 12
Customer self repair 13
Customer self repair 14
Customer self repair 15
Illustrated parts catalog
Mechanical components
Item
1 Front
2 Access
3 Pla
4
Description
bezel
panel
Spare part number
Customer self repair
(on page 5)
459183-001 Mandatory
1
460024-001
Mandatory1
460421-001
Mandatory1
a) Fan holder
—
—
b) System air baffle and PCI card guide
—
—
c) Server feet
—
—
Hard drive blank
459187-001
Mandatory1
stics kit
Mandatory—Parts for which customer self repair is mandatory. If you request HP to replace these parts, you will be
charged for the travel and labor costs of this service.
2
Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If,
however, you require that HP replace them for you, there may or may not be additional charges, depending on the
type of warranty service designated for your product.
1
Illustrated parts catalog 16
No—Some HP parts are not designed for customer self repair. In order to satisfy the customer warranty, HP requires
that an authorized service provider replace the part. These parts are identified as "No" in the Illustrated Parts
Catalog.
3
Mandatory: Obligatoire—Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP
de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront facturés.
2
Optional: Facultatif—Pièces pour lesquelles la réparation par le client est facultative. Ces pièces sont également
conçues pour permettre au client d'effectuer lui-même la réparation. Toutefois, si vous demandez à HP de remplacer
ces pièces, l'intervention peut ou non vous être facturée, selon le type de garantie applicable à votre produit.
3
No: Non—Certaines pièces HP ne sont pas conçues pour permettre au client d'effectuer lui-même la réparation. Pour
que la garantie puisse s'appliquer, HP exige que le remplacement de la pièce soit effectué par un Mainteneur Agréé.
Ces pièces sont identifiées par la mention “Non” dans le Catalogue illustré.
1
1
Mandatory: Obbligatorie—Parti che devono essere necessariamente riparate dal cliente. Se il cliente ne affida la
riparazione ad HP, deve sostenere le spese di spedizione e di manodopera per il servizio.
2
Optional: Opzionali—Parti la cui riparazione da parte del cliente è facoltativa. Si tratta comunque di componenti
progettati per questo scopo. Se tuttavia il cliente ne richiede la sostituzione ad HP, potrebbe dover sostenere spese
addizionali a seconda del tipo di garanzia previsto per il prodotto.
3
No: Non CSR—Alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare la
garanzia, HP richiede che queste parti siano sostituite da un centro di assistenza autorizzato. Tali parti sono
identificate da un “No” nel Catalogo illustrato dei componenti.
Mandatory: Zwingend—Teile, die im Rahmen des Customer Self Repair Programms ersetzt werden müssen. Wenn
Sie diese Teile von HP ersetzen lassen, werden Ihnen die Versand- und Arbeitskosten für diesen Service berechnet.
2
Optional: Optional—Teile, für die das Customer Self Repair-Verfahren optional ist. Diese Teile sind auch für
Customer Self Repair ausgelegt. Wenn Sie jedoch den Austausch dieser Teile von HP vornehmen lassen möchten,
können bei diesem Service je nach den für Ihr Produkt vorgesehenen Garantiebedingungen zusätzliche Kosten
anfallen.
3
No: Kein—Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu
erfüllen, muss das Teil von einem HP Servicepartner ersetzt werden. Im illustrierten Teilekatalog sind diese Teile mit
„No“ bzw. „Nein“ gekennzeichnet.
1
Mandatory: Obligatorio—componentes para los que la reparación por parte del usuario es obligatoria. Si solicita a
HP que realice la sustitución de estos componentes, tendrá que hacerse cargo de los gastos de desplazamiento y de
mano de obra de dicho servicio.
2
Optional: Opcional— componentes para los que la reparación por parte del usuario es opcional. Estos
componentes también están diseñados para que puedan ser reparados por el usuario. Sin embargo, si precisa que
HP realice su sustitución, puede o no conllevar costes adicionales, dependiendo del tipo de servicio de garantía
correspondiente al producto.
3
No: No—Algunos componentes no están diseñados para que puedan ser reparados por el usuario. Para que el
usuario haga valer su garantía, HP pone como condición que un proveedor de servicios autorizado realice la
sustitución de estos componentes. Dichos componentes se identifican con la palabra “No” en el catálogo ilustrado de
componentes.
1
Mandatory: Verplicht—Onderdelen waarvoor Customer Self Repair verplicht is. Als u HP verzoekt deze onderdelen
te vervangen, komen de reiskosten en het arbeidsloon voor uw rekening.
2
Optional: Optioneel—Onderdelen waarvoor reparatie door de klant optioneel is. Ook deze onderdelen zijn
ontworpen voor reparatie door de klant. Als u echter HP verzoekt deze onderdelen voor u te vervangen, kunnen
daarvoor extra kosten in rekening worden gebracht, afhankelijk van het type garantieservice voor het product.
3
No: Nee—Sommige HP onderdelen zijn niet ontwikkeld voor reparatie door de klant. In verband met de
garantievoorwaarden moet het onderdeel door een geautoriseerde Service Partner worden vervangen. Deze
onderdelen worden in de geïllustreerde onderdelencatalogus aangemerkt met "Nee".
1
Mandatory: Obrigatória—Peças cujo reparo feito pelo cliente é obrigatório. Se desejar que a HP substitua essas
peças, serão cobradas as despesas de transporte e mão-de-obra do serviço.
1
Illustrated parts catalog 17
Optional: Opcional—Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o
reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa
adicional, dependendo do tipo de serviço de garantia destinado ao produto.
3
No: Nenhuma—Algumas peças da HP não são projetadas para o reparo feito pelo cliente. A fim de cumprir a
garantia do cliente, a HP exige que um técnico autorizado substitua a peça. Essas peças estão identificadas com a
marca “No” (Não), no catálogo de peças ilustrado.
2
Illustrated parts catalog 18
System components
Item
Description
Spare part number
Customer self repair
(on page 5)
459188-001
Mandatory1
457021-001
Mandatory1
—
—
System components
5 Fa
n
6 Processor
heatsink
7 Processor
a) 1.6-GHz Intel® Celeron® 420, single-core,
512-KB L2 cache, 800-MHz FSB
454523-001 Op
tional2
b) 1.8-GHz Intel® Pentium® 2160, dual-core, 1MB L2 cache, 800-MHz FSB*
455623-001 Op
tional2
c) 2.33-GHz Intel® Xeon® 3065, dual-core, 4MB L2 cache, 1333-MHz FSB*
454525-001 Op
tional2
d) 2.66-GHz Intel® Xeon® 3075, dual-core, 4MB L2 cache, 1333-MHz FSB*
454526-001 Op
tional2
e) 3.00-GHz Intel® Xeon® E3110, dual-core, 6MB L2 cache, 1333-MHz FSB*
463509-001 Op
tional2
f) 3.16-GHz Intel® Xeon® E3120, dual-core, 6MB L2 cache, 1333-MHz FSB*
493930-001 Op
tional2
g) 2.13-GHz Intel® Xeon® 3210, quad-core, 8MB L2 cache, 1066-MHz FSB*
457020-001 Op
tional2
Illustrated parts catalog 19
Item
Description
Spare part number
Customer self repair
(on page 5)
h) 2.40-GHz Intel® Xeon® 3220, quad-core, 8MB L2 cache, 1066-MHz FSB*
454529-001 Op
tional2
i) 2.00-GHz Intel® Core™2 E4400, dual-core, 2MB L2 cache, 800-MHz FSB*
454528-001 Op
tional2
j) 2.40-GHz Intel® Core™2 E4600, dual-core, 2MB L2 cache, 800-MHz FSB*
462569-001 Op
tional2
k) 2.66-GHz Intel® Xeon® X3350, quad-core,
12-MB L2 cache, 1333-MHz FSB*
463507-001 Op
tional2
l) 2.50-GHz Intel® Xeon® X3320, quad-core, 6MB L2 cache, 1333-MHz FSB*
463508-001 Op
tional2
m) 2.66-GHz Intel® Xeon® X3330, quad-core,
6-MB L2 cache, 1333-MHz FSB*
493929-001 Op
tional2
n) 2.83-GHz Intel® Xeon® X3360, quad-core,
12-MB L2 cache, 1333-MHz FSB*
469859-001 Op
tional2
o) 3.00-GHz Intel® Xeon® X3370, quad-core,
12-MB L2 cache, 1333-MHz FSB*
493928-001 Op
tional2
p) 2.00-GHz Intel® Celeron® C440, single-core,
512-KB L2 cache, 800-MHz FSB*
454524-001 Op
tional2
Memory
8
PC2-6400 ECC RoHS DIMM
—
—
a) 512-MB
459931-001
Mandatory1
b) 1-GB*
459932-001
Mandatory1
c) 2-GB*
460424-001
Mandatory1
454510-001
Optional2
459191-001
Optional2
—
—
a) 36-GB, SAS, 10,000-rpm
376593-001
Mandatory1
b) 72-GB, SAS, 10,000-rpm*
376594-001
Mandatory1
c) 146-GB, SAS, 10,000-rpm*
376595-001
Mandatory1
d) 72-GB, SAS, dual-port, 15,000-rpm*
389343-001
Mandatory1
e) 146-GB, SAS, dual-port, 15,000-rpm*
389344-001
Mandatory1
f) 300-GB, SAS, dual-port, 15,000-rpm*
416428-001
Mandatory1
g) 80-GB, SATA, 7,200-rpm*
397551-001
Mandatory1
h) 160-GB, SATA, 7,200-rpm*
397552-001
Mandatory1
i) 250-GB, SATA, 7,200-rpm*
397553-001
Mandatory1
j) 500-GB, SATA, 7,200-rpm*
395501-001
Mandatory1
k) 750-GB, SATA, 7,200-rpm*
432401-001
Mandatory1
Boards
9 System
10
board
Hard drive cage with hard drive backplane
Mass storage devices
11 Hard
drive
Illustrated parts catalog 20
Item
Description
Spare part number
Customer self repair
(on page 5)
447464-001
Mandatory1
—
—
a) Hot-plug power supply, 430-W
432479-001
Mandatory1
b) Non-hot-plug power supply, 410-W*
460422-001
Mandatory1
Power supply cage with backplane
432478-001
Mandatory1
battery
234556-001
Mandatory1
16
Optical drive cable*
459189-001
Mandatory1
17
SAS/SATA hard drive cable*
459190-001
Mandatory1
18
SAS hard drive cable*
459934-001
Mandatory1
19
Power button/LED cable*
459186-001
Mandatory1
20
Temperature sensor cable*
460423-001
Mandatory1
21
Front USB cable*
459184-001
Mandatory1
413965-001
Mandatory1
12 DV
D-ROM drive
Power
13 Power
14
supplies
15 System
Cables
Miscellaneous
22
23 Bezel
T-10/T-15 Torx screwdriver*
key*
405168-001 Mandatory
1
Options
24 DV
D-RW drive*
447466-001
Mandatory1
25 Disk
ette drive*
392545-001
Mandatory1
462412-001
Mandatory1
26 PC
I-X extender board*
27
HP Smart Array E200 Controller*
412799-001
Mandatory1
28
HP Smart Array E500 Controller*
444843-001
Mandatory1
29
HP Smart Array P400 Controller*
405832-001
Mandatory1
30
HP Smart Array P800 Controller*
398647-001
Mandatory1
* Not shown
1
Mandatory—Parts for which customer self repair is mandatory. If you request HP to replace these parts, you will be
charged for the travel and labor costs of this service.
2
Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If,
however, you require that HP replace them for you, there may or may not be additional charges, depending on the
type of warranty service designated for your product.
3
No—Some HP parts are not designed for customer self repair. In order to satisfy the customer warranty, HP requires
that an authorized service provider replace the part. These parts are identified as "No" in the Illustrated Parts
Catalog.
Mandatory: Obligatoire—Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP
de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront facturés.
2
Optional: Facultatif—Pièces pour lesquelles la réparation par le client est facultative. Ces pièces sont également
conçues pour permettre au client d'effectuer lui-même la réparation. Toutefois, si vous demandez à HP de remplacer
ces pièces, l'intervention peut ou non vous être facturée, selon le type de garantie applicable à votre produit.
1
Illustrated parts catalog 21
No: Non—Certaines pièces HP ne sont pas conçues pour permettre au client d'effectuer lui-même la réparation. Pour
que la garantie puisse s'appliquer, HP exige que le remplacement de la pièce soit effectué par un Mainteneur Agréé.
Ces pièces sont identifiées par la mention “Non” dans le Catalogue illustré.
3
Mandatory: Obbligatorie—Parti che devono essere necessariamente riparate dal cliente. Se il cliente ne affida la
riparazione ad HP, deve sostenere le spese di spedizione e di manodopera per il servizio.
2
Optional: Opzionali—Parti la cui riparazione da parte del cliente è facoltativa. Si tratta comunque di componenti
progettati per questo scopo. Se tuttavia il cliente ne richiede la sostituzione ad HP, potrebbe dover sostenere spese
addizionali a seconda del tipo di garanzia previsto per il prodotto.
3
No: Non CSR—Alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare la
garanzia, HP richiede che queste parti siano sostituite da un centro di assistenza autorizzato. Tali parti sono
identificate da un “No” nel Catalogo illustrato dei componenti.
1
1
Mandatory: Zwingend—Teile, die im Rahmen des Customer Self Repair Programms ersetzt werden müssen. Wenn
Sie diese Teile von HP ersetzen lassen, werden Ihnen die Versand- und Arbeitskosten für diesen Service berechnet.
2
Optional: Optional—Teile, für die das Customer Self Repair-Verfahren optional ist. Diese Teile sind auch für
Customer Self Repair ausgelegt. Wenn Sie jedoch den Austausch dieser Teile von HP vornehmen lassen möchten,
können bei diesem Service je nach den für Ihr Produkt vorgesehenen Garantiebedingungen zusätzliche Kosten
anfallen.
3
No: Kein—Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu
erfüllen, muss das Teil von einem HP Servicepartner ersetzt werden. Im illustrierten Teilekatalog sind diese Teile mit
„No“ bzw. „Nein“ gekennzeichnet.
Mandatory: Obligatorio—componentes para los que la reparación por parte del usuario es obligatoria. Si solicita a
HP que realice la sustitución de estos componentes, tendrá que hacerse cargo de los gastos de desplazamiento y de
mano de obra de dicho servicio.
2
Optional: Opcional— componentes para los que la reparación por parte del usuario es opcional. Estos
componentes también están diseñados para que puedan ser reparados por el usuario. Sin embargo, si precisa que
HP realice su sustitución, puede o no conllevar costes adicionales, dependiendo del tipo de servicio de garantía
correspondiente al producto.
3
No: No—Algunos componentes no están diseñados para que puedan ser reparados por el usuario. Para que el
usuario haga valer su garantía, HP pone como condición que un proveedor de servicios autorizado realice la
sustitución de estos componentes. Dichos componentes se identifican con la palabra “No” en el catálogo ilustrado de
componentes.
1
Mandatory: Verplicht—Onderdelen waarvoor Customer Self Repair verplicht is. Als u HP verzoekt deze onderdelen
te vervangen, komen de reiskosten en het arbeidsloon voor uw rekening.
2
Optional: Optioneel—Onderdelen waarvoor reparatie door de klant optioneel is. Ook deze onderdelen zijn
ontworpen voor reparatie door de klant. Als u echter HP verzoekt deze onderdelen voor u te vervangen, kunnen
daarvoor extra kosten in rekening worden gebracht, afhankelijk van het type garantieservice voor het product.
3
No: Nee—Sommige HP onderdelen zijn niet ontwikkeld voor reparatie door de klant. In verband met de
garantievoorwaarden moet het onderdeel door een geautoriseerde Service Partner worden vervangen. Deze
onderdelen worden in de geïllustreerde onderdelencatalogus aangemerkt met "Nee".
1
Mandatory: Obrigatória—Peças cujo reparo feito pelo cliente é obrigatório. Se desejar que a HP substitua essas
peças, serão cobradas as despesas de transporte e mão-de-obra do serviço.
2
Optional: Opcional—Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o
reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa
adicional, dependendo do tipo de serviço de garantia destinado ao produto.
3
No: Nenhuma—Algumas peças da HP não são projetadas para o reparo feito pelo cliente. A fim de cumprir a
garantia do cliente, a HP exige que um técnico autorizado substitua a peça. Essas peças estão identificadas com a
marca “No” (Não), no catálogo de peças ilustrado.
1
Illustrated parts catalog 22
Illustrated parts catalog 23
Removal and replacement procedures
Required tools
You need the following items for some procedures:
•
T-10/T-15 Torx screwdriver (included with the server)
•
HP Insight Diagnostics software ("HP Insight Diagnostics" on page 61)
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
•
Place parts on a grounded surface before removing them from their containers.
•
Avoid touching pins, leads, or circuitry.
•
Always be properly grounded when touching a static-sensitive component or assembly.
Server warnings and cautions
Before installing a server, be sure that you understand the following warnings and cautions.
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord
extends from the server.
Removal and replacement procedures 24
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
CAUTION: Protect the server from power fluctuations and temporary interruptions with a
regulating uninterruptible power supply (UPS). This device protects the hardware from damage
caused by power surges and voltage spikes and keeps the system in operation during a power
failure.
Rack warnings
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
WARNING: To reduce the risk of personal injury or equipment damage when unloading a
rack:
• At least two people are needed to safely unload the rack from the pallet. An empty 42U
rack can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and
may become unstable when being moved on its casters.
• Never stand in front of the rack when it is rolling down the ramp from the pallet. Always
handle the rack from both sides.
WARNING: When installing a server in a telco rack, be sure that the rack frame is adequately
secured to the top and bottom of the building structure.
Removal and replacement procedures 25
WARNING: This server is very heavy. To reduce the risk of personal injury or damage to the
equipment:
• Observe local occupational health and safety requirements and guidelines for manual
material handling.
• Get help to lift and stabilize the product during installation or removal, especially when the
product is not fastened to the rails. When the server weighs more than 22.5 kg (50 lb), at
least two people must lift the server into the rack together. A third person may be required
to help align the server if the server is installed higher than chest level.
• Use caution when installing the server in or removing the server from the rack; it is unstable
when not fastened to the rails.
Preparation procedures
Power down the server
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
IMPORTANT: If installing a hot-plug device, it is not necessary to power down the server.
1.
Shut down the OS as directed by the OS documentation.
2.
Press the Power On/Standby button to place the server in standby mode. When the server enters
standby power mode, the system power LED changes to amber.
3.
Disconnect the power cords.
The system is now without power.
Remove the server from the rack
If the server is installed with an optional rack enabling kit, remove the server from the rack before
beginning any service procedures.
1.
Power down the server (on page 26).
2.
Disconnect peripheral device and power cables.
3.
Release the server/tray from the rack.
4.
Extend the server/tray from the rack.
5.
Remove the server from the tray and place it on a flat work surface.
Removal and replacement procedures 26
Unlock the bezel
Unlock and remove the bezel before accessing the hard drive cage and media bays. Unlock the bezel
before removing the access panel. Close and lock the bezel during normal server operations to ensure
proper cooling airflow.
Bezel
Unlock and remove the bezel before accessing the hard drive cage and media bays. Unlock the bezel
before removing the access panel. Close and lock the bezel during normal server operations to ensure
proper cooling airflow.
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel.
Removal and replacement procedures 27
3.
Remove the bezel.
To replace the component, reverse the removal procedure.
Access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the server from the rack, if necessary ("Remove the server from the rack" on page 26).
3.
Unlock and open the bezel ("Unlock the bezel" on page 27).
4.
Loosen the two thumbscrews.
5.
Slide the access panel toward the rear of the server and remove from the server.
To replace the component, reverse the removal procedure.
Bezel blank
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the front bezel ("Bezel" on page 27).
Removal and replacement procedures 28
3.
Remove a bezel blank.
To replace the component, reverse the removal procedure.
Media bay blank
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the front bezel ("Bezel" on page 27).
3.
Remove a media bay blank.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 29
Hard drive blank
Remove the component as indicated.
To replace the component, slide the component into the bay until it clicks.
Hard drives
To remove the component:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1.
Determine the status of the hard drive from the hot-plug hard drive LEDs ("Hot-plug SATA or SAS
hard drive LEDs" on page 65).
IMPORTANT: When hot-plug SATA hard drives are installed, SATA LED functionality and full
SATA hot-plug capability are not supported with the embedded controller. For full LED and hotplug support, an optional SATA RAID or SAS controller must be installed.
2.
Unlock and open the bezel ("Unlock the bezel" on page 27).
Removal and replacement procedures 30
3.
Remove the hard drive.
To replace the component:
1.
Slide the drive into the cage until it clicks, locking the drive into place.
2.
Close the lever.
IMPORTANT: When the drive is inserted, the drive LEDs flash for 2 seconds to indicate that the
drive is seated properly and receiving power.
3.
As the drive begins to spin, be sure that the drive LEDs illuminate one at a time and then turn off
together to indicate that the system has recognized the new drive.
4.
In fault-tolerant configurations, allow the replacement drive to be reconstructed automatically with
data from the other drives. While reconstruction is in progress, the online LED flashes.
Power button/LED cable
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove the media drive in the bottom bay, if necessary ("SATA optical drive" on page 34).
5.
Disconnect the power button/LED cable from the system board ("System board components" on
page 68).
Removal and replacement procedures 31
6.
Remove the power button/LED cable.
To replace the component, reverse the removal procedure.
Temperature sensor
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the temperature sensor cable from the system board ("System board components" on
page 68).
5.
Remove the temperature sensor.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 32
Front USB connectors
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the front USB cable from the system board ("System board components" on page 68).
5.
Remove the front USB connectors.
To replace the component, reverse the removal procedure.
USB diskette drive
Disconnect a USB diskette drive from the USB connector on the server front panel.
Removal and replacement procedures 33
Diskette drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the power and data cables from the drive and the system board ("System board
components" on page 68).
5.
Remove the diskette drive.
To replace the component, reverse the removal procedure.
SATA optical drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the power and data cables from the rear of the drive and the system board ("System
board components" on page 68).
Removal and replacement procedures 34
5.
Remove the SATA optical drive.
To replace the component, reverse the removal procedure.
Full-height tape drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the power and data cables from the drive and the system board ("System board
components" on page 68).
Removal and replacement procedures 35
5.
Remove the full-height tape drive.
To replace the component, reverse the removal procedure.
USB tape drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the USB tape drive cable from the drive and the system board ("System board
components" on page 68).
Removal and replacement procedures 36
5.
Remove the USB tape drive.
To replace the component, reverse the removal procedure.
Hard drive cage and hard drive backplane
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove all hot-plug hard drives ("Hard drives" on page 30).
5.
Disconnect the power and data cables from the hard drive backplane and the system board
("System board components" on page 68).
6.
Remove the hard drive cage and hard drive backplane.
Removal and replacement procedures 37
To replace the component, reverse the removal procedure.
Rear fan and fan holder
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove the rear fan.
5.
Remove the rear fan from the fan holder.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 38
System air baffle and PCI card guide
To remove the component:
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove any full-length expansion boards installed in slot 1, 3, or 5, if installed ("Expansion boards"
on page 50).
5.
Disconnect the PCI fan cable, if installed ("System board components" on page 68).
6.
Remove the system air baffle and PCI card guide.
To replace the component, reverse the removal procedure.
PCI fan
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the PCI fan cable from the system board ("System board components" on page 68).
5.
Remove the system air baffle and PCI card guide ("System air baffle and PCI card guide" on page
39).
Removal and replacement procedures 39
6.
Remove the PCI fan.
To replace the component, reverse the removal procedure.
Non-redundant power supply
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the power and signal cables from the system board ("System board components" on
page 68).
5.
Remove the power supply.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 40
Hot-plug power supply
CAUTION: Leave all failed power supplies installed until ready to replace with a working
power supply.
1.
Disconnect the power cord of the failed power supply from the AC power source.
2.
Disconnect the power cord from the failed power supply.
3.
Remove the power supply.
To replace the component, reverse the removal procedure.
Redundant power supply backplane assembly
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove all power supplies ("Hot-plug power supply" on page 41).
5.
Disconnect all power cables.
Removal and replacement procedures 41
6.
Remove the redundant power supply backplane assembly.
To replace the component, reverse the removal procedure.
DIMM
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove the DIMM.
To replace the component, reverse the removal procedure.
IMPORTANT: DIMMs do not seat fully if turned the wrong way.
Removal and replacement procedures 42
You can expand server memory by installing PC2-6400 DDR2 SDRAM DIMMs. The system supports up to
four DIMMs for a maximum of 8 GB.
For DIMM slot locations and bank assignments, see "System board components (on page 68)."
Observe the following guidelines when installing additional memory:
•
DIMMs installed in the server must be unbuffered DDR2 SDRAM with ECC.
•
If only a single DIMM is installed, it must be installed in slot 1A.
•
All DIMMs installed must be the same speed.
BIOS detects the DIMM population and sets the system as follows:
•
Single-bank mode: Single DIMM installed in one bank only
•
Single-bank interleaved mode: DIMMs installed in one bank with equal capacities per slot
•
Dual-bank asymmetric mode: DIMMs installed in both banks, but of unequal capacities per bank
•
Dual-bank interleaved mode: DIMMs installed in both banks with equal capacities per bank
The following table lists some, but not all, possible configurations. For best performance, HP recommends
dual-bank interleaved mode configurations.
Slot 1A
Slot 2B
Slot 3A
Slot 4B
Total memory
512 MB
— — — 512
512 MB
—
1 GB
———1
1 GB
—
2 GB
———2
2 GB
—
2 GB
—
4 GB
Single-bank interleaved
2 GB
2 GB
2 GB
—
6 GB
Dual-bank asymmetric
2 GB
2 GB
2 GB
2 GB
8 GB
Dual-bank interleaved
MB
512 MB
—
1 GB
GB
1 GB
—
2 GB
GB
Mode
Single-bank
Single-bank interleaved
Single-bank
Single-bank interleaved
Single-bank
Heatsink
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Disconnect the processor heatsink fan cable from the system board ("System board components" on
page 68).
5.
Remove the heatsink.
CAUTION: Heatsink retaining screws should be loosened in diagonally opposite pairs (in an
"X" pattern).
Removal and replacement procedures 43
To replace the heatsink:
1.
Use the alcohol swab to remove all the existing thermal grease from the processor. Allow the alcohol
to evaporate before continuing.
2.
Apply new grease to the top of the processor in one of the following patterns to ensure even
distribution.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
CAUTION: The heatsink is designed to fit one way in the server. Failure to install the heatsink
properly can result in thermal damage or equipment failure.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
Removal and replacement procedures 44
3.
Align and install the heatsink with the arrow on the heatsink label pointing to the front of the server.
4.
Connect the processor heatsink fan cable to the system board ("System board components" on page
68). When the heatsink is oriented properly, cable length is sufficient for the corresponding
connector.
5.
Install the access panel.
6.
Lock the bezel.
Processor
CAUTION: Removal of the processor or heatsink renders the thermal layer between the
processor and heatsink useless. Clean the component with the provided alcohol swab, then
add thermal grease.
IMPORTANT: If upgrading processor speed, update the system ROM before installing the
processor.
NOTE: PPM 1 is embedded in the system board.
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove the heatsink ("Heatsink" on page 43).
Removal and replacement procedures 45
5.
Open the processor retaining latch and the processor socket retaining bracket.
6.
Using your fingers, remove the failed processor.
To replace the component:
IMPORTANT: Be sure the processor remains inside the processor installation tool.
Removal and replacement procedures 46
1.
If the processor has separated from the installation tool, carefully re-insert the processor in the tool.
2.
Align the processor installation tool with the socket and install the spare processor.
CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides
on the processor and socket to properly align the processor with the socket. Refer to the server
hood label for specific instructions.
Removal and replacement procedures 47
3.
Press down firmly until the processor installation tool clicks and separates from the processor, and
then remove the processor installation tool.
4.
Close the processor retaining latch and the processor socket retaining bracket.
5.
Clean the old thermal grease from the heatsink with the alcohol swab. Allow the alcohol to
evaporate before continuing.
Removal and replacement procedures 48
6.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: The heatsink is designed to fit one way in the server. Failure to install the heatsink
properly can result in thermal damage or equipment failure.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
7.
Align and install the heatsink with the arrow on the heatsink label pointing to the front of the server.
8.
Connect the processor heatsink fan cable to the system board ("System board components" on page
68). When the heatsink is oriented properly, cable length is sufficient for the corresponding
connector.
9.
Install the access panel.
10.
Lock the bezel.
11.
Power up the server.
Removal and replacement procedures 49
Expansion boards
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the bezel ("Bezel" on page 27).
4.
Remove the access panel ("Access panel" on page 28).
5.
Remove the expansion board.
To replace the component, reverse the removal procedure.
PCI-X extender board
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove the expansion board installed in slot 1, if installed ("Expansion boards" on page 50).
5.
Remove the system air baffle and PCI card guide ("System air baffle and PCI card guide" on page
39).
Removal and replacement procedures 50
6.
Remove the PCI-X extender board.
To replace the component, reverse the removal procedure.
Battery
If the server no longer automatically displays the correct date and time, you may need to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.
To remove the component:
1.
Power down the server (on page 26).
2.
Remove the bezel ("Bezel" on page 27).
3.
Remove the access panel ("Access panel" on page 28).
Removal and replacement procedures 51
4.
Remove the battery.
To replace the component, reverse the removal procedure.
IMPORTANT: After replacing the battery, the server is automatically configured with the default
settings. The user can update these settings using RBSU.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
System board
To remove the component:
1.
Power down the server (on page 26).
2.
Unlock the bezel (on page 27).
3.
Remove the access panel ("Access panel" on page 28).
4.
Remove all DIMMs ("DIMM" on page 42).
5.
Remove all PCI expansion boards ("Expansion boards" on page 50).
6.
Remove the system air baffle and PCI card guide ("System air baffle and PCI card guide" on page
39).
7.
Remove the PCI-X extender board, if installed ("PCI-X extender board" on page 50).
8.
Disconnect all cables from the system board ("System board components" on page 68).
9.
Remove the heatsink.
CAUTION: Heatsink retaining screws should be loosened in diagonally opposite pairs (in an
"X" pattern).
Removal and replacement procedures 52
10.
Open the processor retaining latch and the processor socket retaining bracket.
CAUTION: To avoid damage to the processor:
• Handle the processor only by the edges.
• Do not touch the bottom of the processor, especially the contact area.
Removal and replacement procedures 53
11.
Using your fingers, remove the processor from the failed system board.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
12.
Remove the failed system board.
To replace the system board:
1.
Install the spare system board in the server before installing the processor.
2.
Prepare the processor socket on the spare system board:
Removal and replacement procedures 54
a. Open the processor retaining latch and the processor socket retaining bracket.
b. Remove the processor socket protective cover.
3.
Install the processor socket cover onto the processor socket of the failed system board.
4.
Install the processor on the spare system board.
CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides
on the processor and socket to properly align the processor with the socket. Refer to the server
hood label for specific instructions.
CAUTION: Always install the processor parallel to the system board to avoid damage to the
pins.
Removal and replacement procedures 55
5.
Close the processor retaining latch and the processor socket retaining bracket.
6.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
Allow the alcohol to evaporate before continuing.
Removal and replacement procedures 56
7.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: The heatsink is designed to fit one way in the server. Failure to install the heatsink
properly can result in thermal damage or equipment failure.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
8.
Align and install the heatsink with the arrow on the heatsink label pointing to the front of the server.
9.
Connect the processor heatsink fan cable to the system board ("System board components" on page
68). When the heatsink is oriented properly, cable length is sufficient for the corresponding
connector.
IMPORTANT: Install all components with the same configuration that was used on the failed
system board.
Removal and replacement procedures 57
10.
Install all components removed from the failed system board.
11.
Install the access panel.
12.
Lock the bezel.
13.
Power up the server.
After you replace the system board, you must re-enter the server serial number and the product ID.
1.
During the server startup sequence, press the F9 key to access RBSU.
2.
Select the Advanced Options menu.
3.
Select Serial Number. The following warning is displayed:
Warning: The serial number should ONLY be modified by qualified service
personnel. This value should always match the serial number located on
the chassis.
4.
Press the Enter key to clear the warning.
5.
Enter the serial number.
6.
Select Product ID. The following warning is displayed.
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
7.
Enter the product ID and press the Enter key.
8.
Press the Esc key to close the menu.
9.
Press the Esc key to exit RBSU.
10.
Press the F10 key to confirm exiting RBSU. The server will automatically reboot.
Server feet
This procedure applies to tower servers only.
To remove the component:
1.
Power down the server (on page 26).
2.
Place the server on its side on a flat, level surface.
3.
Remove the screws securing each of the server feet.
4.
Remove the server feet.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 58
Cabling
Server cabling
Item
Description
1
SATA hard drive cable (hard drive)
2
Front USB cable
3
SATA optical drive cable
4
Front panel LED cable
Cabling 59
SATA hard drive cabling
Item
Description
1 Power
cable
2 SATA
cable
SAS hard drive cabling
Item
1 Power
2 SAS
Description
cable
cable
Cabling 60
Diagnostic tools
Troubleshooting resources
The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving common problems and
comprehensive courses of action for fault isolation and identification, error message interpretation, issue
resolution, and software maintenance on ProLiant servers and server blades. This guide includes problemspecific flowcharts to help you navigate complex troubleshooting processes. To view the guide, select a
language:
•
English (http://www.hp.com/support/ProLiant_TSG_en)
•
French (http://www.hp.com/support/ProLiant_TSG_fr)
•
Italian (http://www.hp.com/support/ProLiant_TSG_it)
•
Spanish (http://www.hp.com/support/ProLiant_TSG_sp)
•
German (http://www.hp.com/support/ProLiant_TSG_gr)
•
Dutch (http://www.hp.com/support/ProLiant_TSG_nl)
•
Japanese (http://www.hp.com/support/ProLiant_TSG_jp)
HP Insight Diagnostics
HP Insight Diagnostics is a proactive server management tool, available in both offline and online
versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify
server installations, troubleshoot problems, and perform repair validation.
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the
OS is not running. To run this utility, launch the SmartStart CD.
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective server management. Available in Microsoft® Windows® and
Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, refer to the HP website
(http://www.hp.com/servers/diags).
HP Insight Diagnostics survey functionality
HP Insight Diagnostics (on page 61) provides survey functionality that gathers critical hardware and
software information on ProLiant servers.
This functionality supports operating systems that may not be supported by the server. For operating
systems supported by the server, see the HP website (http://www.hp.com/go/supportos).
If a significant change occurs between data-gathering intervals, the survey function marks the previous
information and overwrites the survey data files to reflect the latest changes in the configuration.
Diagnostic tools 61
Survey functionality is installed with every SmartStart-assisted HP Insight Diagnostics installation, or it can
be installed through the HP PSP.
NOTE: The current version of SmartStart provides the memory spare part numbers for the
server. To download the latest version, see the HP website (http://www.hp.com/support).
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each
event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:
•
From within HP SIM
•
From within Survey Utility
•
From within operating system-specific IML viewers
o
For NetWare: IML Viewer
o
For Windows®: IML Viewer
o
For Linux: IML Viewer Application
•
From within the iLO 2 user interface
•
From within HP Insight Diagnostics (on page 61)
For more information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack.
ROMPaq disaster recovery
If the current version of the ROM is corrupt, perform ROMPaq disaster recovery procedures:
1.
Create a ROMPaq diskette using the Autorun Menu on the SmartStart CD.
2.
Power down the server (on page 26).
3.
Insert the ROMPaq diskette.
4.
Power up the server.
a. The server generates one long beep and two short beeps to indicate that you are in disaster
recovery mode. If the diskette is not in place, the system continues to beep until a valid ROMPaq
diskette is inserted.
b. The ROMPaq diskette flashes the system ROM image. If successful, a sequence of ascending
audible beeps is generated. If unsuccessful, a sequence of descending audible beeps is
generated and you need to repeat the disaster recovery process.
5.
Power down the server (on page 26).
6.
Remove the ROMPaq diskette.
7.
Power up the server.
Diagnostic tools 62
Component identification
Front panel components
Item
Description
1 DVD-ROM
drive
2
Media bays (bezel blanks)
3
USB connectors (2)
4 Bezel
5
lock
Hard drive bays
Component identification 63
Front panel LEDs and buttons
Item
Description
Status
1
DVD-ROM drive ejector button
—
2
DVD-ROM drive activity LED
On = Activity
Off = No activity
3
Power On/Standby button
—
4
System power LED
Green = AC power is functioning
Amber = AC power is in standby mode
Off = AC power is not available
5
Hard drive activity LED
Green = Activity
Off = No activity
6
NIC link/activity LED
Green = Linked
Flashing green = Linked with activity on the network
Off = No network link
7
Internal health LED*
Green = System health is OK
Amber = System health is degraded
Red = System health is critical
Off = Normal (when in standby mode)
* For servers with redundant hot-plug power supplies, the internal health LED also signals a power supply event
("Rear panel LEDs" on page 67).
Component identification 64
SAS and SATA device numbers
Hot-plug SATA or SAS hard drive LEDs
Item
LED description
Status
1
Fault/UID status
Amber = Drive failure
Flashing amber = Fault-process activity
Blue = Unit identification is active
Off = No fault-process activity
2
Online/Activity status
Green = Drive activity
Flashing green = High activity on the
drive or drive is being configured as part
of an array
Off = No drive activity
Component identification 65
The online/activity status LED will not illuminate if using SATA drives connected to the embedded storage
device. In this configuration, SATA hard drive activity can be identified using the hard drive activity LED
on the system front panel.
Rear panel components
The server may look different from that shown.
Item
Description
1
Power supply connector
2 Mouse
3K
connector
eyboard connector
4
10/100/1000 NIC 1 connector
5
iLO 2 management port
6
USB connectors (2)
7V
8 Seria
ideo connector
l connector
Component identification 66
Rear panel LEDs
•
Redundant hot-plug power supply model
Item
LED
Status
1
NIC/iLO 2 link
On = Link
Off = No link
2
NIC/iLO 2 activity
Flashing = Activity
Off = No activity
3 Redundant
power
supply
Green = Power supply is on and
functioning
Off = Power supply is not connected
or power supply fault
•
Non-redundant non-hot-plug power supply model
Component identification 67
Item
LED
Status
1
NIC/iLO 2 link
On = Link
Off = No link
2
NIC/iLO 2 activity
Flashing = Activity
Off = No activity
System board components
For this server, some system board slots and connectors are reserved.
Item
Description
1
DIMM slot 1 (bank A)
2
DIMM slot 2 (bank B)
3
DIMM slot 3 (bank A)
4
DIMM slot 4 (bank B)
5 Processor
socket
6
Redundant power supply connector
7
System power connector
8
Processor power connector
9
Processor heatsink fan connector
10 Reserved
11 Reserved
12
Front USB cable connector
13
SATA connector 2 (hard drive)
14
Front panel LED cable connector
15 NMI
16
jumper
Temperature sensor connector
Component identification 68
Item
Description
17
System maintenance switch
18
PCI fan connector
19 System
battery
20
SATA connector 4 (hard drive)
21
SATA connector 6 (optical drive)
22
Internal USB connector
23
PCI-X extender board connector
24
SATA connector 5 (optical drive)
25
USB tape drive connector
26
Diskette drive connector
27
SATA connector 3 (hard drive)
28
SATA connector 1 (hard drive)
29 Pa
rallel connector
30 Seria
31
l connector
PCI Express expansion slot 3
32 Reserved
33
PCI Express expansion slot 5*
34
PCI Express expansion slot 6*
35
Rear fan connector
36
PCI Express expansion slot 7*
37 Reserved
* x8 PCI Express cards are supported, but will run at x1 speeds.
System maintenance switch
Position
Default
S1 Off
Function
Off = iLO 2 security is enabled
On = iLO 2 security is disabled
S2 Off
Off = System configuration can
be changed
On = System configuration is
locked
S3 Off
Reserved
S4 Off
Reserved
S5 Off
Off = No function
On = Clears power-on
password and administrator
password
S6
Off
Off = Normal
On = ROM treats system
configuration as invalid
Component identification 69
Position
Default
Function
S7 Off
Reserved
S8 Off
Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
For information on emergency ROM backup recovery, refer to ROMPaq disaster recovery (on page 62).
NMI functionality
An NMI crash dump enables administrators to create crash dump files when a system is hung and not
responding to traditional debug mechanisms.
Crash dump log analysis is an essential part of diagnosing reliability problems, such as hangs in
operating systems, device drivers, and applications. Many crashes freeze a system, and the only
available action for administrators is to cycle the system power. Resetting the system erases any
information that could support problem analysis, but the NMI feature preserves that information by
performing a memory dump before a hard reset.
To force the OS to invoke the NMI handler and generate a crash dump log, the administrator can do any
of the following:
•
Short the NMI jumper pins
•
Press the NMI switch
•
Use the iLO Virtual NMI feature
For additional information, see the whitepaper on the HP website
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00797875/c00797875.pdf).
Component identification 70
System board LEDs
Item
LED description
Status
1
Processor failure
Amber = A multibit error has occurred.
Off = Normal
2
PPM failure
Amber = PPM has failed.
Off = Normal
3 Processor
heatsink
fan failure
Amber = Processor heatsink fan has failed or is
missing.
Off = Normal
4 Reserved
—
5 Reserved
—
6
Amber = PCI fan has failed or is missing.
PCI fan failure
Off = Normal
7
Overtemperature
Amber = System has reached a cautionary or
critical temperature level.
Off = Normal
8
DIMM 4 failure
Amber = DIMM has failed or is missing.
Off = Normal
9
DIMM 3 failure
Amber = DIMM has failed or is missing.
Off = Normal
10
DIMM 2 failure
Amber = DIMM has failed or is missing.
Off = Normal
11
DIMM 1 failure
Amber = DIMM has failed or is missing.
Off = Normal
12
Rear fan failure
Amber = Rear fan has failed or is missing.
Off = Normal
Component identification 71
System LEDs and internal health LED combinations
When the internal health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated system LEDs and the internal health LED indicate system
status.
NOTE: The system management driver must be installed for the internal system health LED to
provide pre-failure and warranty conditions.
The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM may
report server status differently than the health LEDs because the software tracks more system attributes.
System LED and
color
Internal health
LED color
Status
Processor failure
(Amber)
Red
One or more of the following conditions may exist:
•
Processor has failed.
•
Processor is not installed in the socket.
•
ROM detected a failed processor during POST.
Amber
Processor is in a pre-failure condition.
PPM failure (Amber)
Red
PPM has failed.
DIMM failure, slot X
(Amber)
Red
•
DIMM in slot X has failed.
•
DIMM has experienced a multi-bit error.
•
DIMM in slot X has reached single-bit correctable error
threshold.
•
DIMM in slot X is in a pre-failure condition.
•
No valid or usable memory is installed in the system.
•
The banks are not populated in the correct order.
Amber
DIMM failure (all
slots, Amber)
Red
Overtemperature
(Amber)
Red
System temperature has exceeded OS cautionary level or
critical hardware level.
Fan failure (Amber)
Red
A required fan has failed.
Component identification 72
PCI-X extender board components
Item
Description
1
PCI-X expansion slot 1
2
System board connector
Fan locations
Item
Description
1 Rea
r fan
2 Processor
3
fan
PCI fan (optional)
Component identification 73
Specifications
Environmental specifications
Specification
Value
Temperature range*
Operating 10
Shipping -1
Maximum wet bulb temperature
°C to 35°C (50°F to 95°F)
0°C to 60°C (14°F to 140°F)
28°C (82.4°F)
Relative humidity
(noncondensing)**
Operating 20%
to 80%
Non-operating 20%
to 90%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to
3048 m (10,000 ft) is applicable. No direct sunlight allowed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.
Server specifications
Specification
Value
Dimension
Height
43.2 cm (17.0 in)
Depth (without bezel)
58.0 cm (22.8 in)
Depth (with bezel)
61.0 cm (24.0 in)
Width
20.0 cm (7.9 in)
Weight (no drives installed)
15.0 kg (33.1 lb)
Input requirement
Rated input voltage
100 VAC to 240 VAC *
Rated input frequency
47 Hz to 63 Hz
Rated input current
8 A (100 V) to 4 A (200 V)
Rated input power
1000 W
BTUs per hour
2730
Power supply output
Rated steady-state power
3.3 V/5 V 110 W
12 V CPU 300 W
Specifications 74
Specification
Value
Maximum peak power
410 W (non-redundant non-hotplug)
430 W (redundant hot-plug)
* 100 to 127 VAC is required for 8 A; 200 to 240 VAC is required for 4 A.
Specifications 75
Acronyms and abbreviations
CMOS
complementary metal-oxide semiconductor
CSR
Customer Self Repair
DDR2
double data rate-2
HP SIM
HP Systems Insight Manager
NMI
non-maskable interrupt
PCI
peripheral component interface
PCI Express
Peripheral Component Interconnect Express
PCI-X
peripheral component interconnect extended
POST
Power-On Self Test
PPM
processor power module
RAID
redundant array of inexpensive (or independent) disks
RBSU
ROM-Based Setup Utility
Acronyms and abbreviations 76
SAS
serial attached SCSI
SATA
serial ATA
SCSI
small computer system interface
UID
unit identification
UPS
uninterruptible power system
USB
universal serial bus
Acronyms and abbreviations 77
Index
A
E
access panel 16, 28
additional information 61
air baffle 39
electrostatic discharge 24
environmental specifications 74
expansion boards 50
expansion slots 68, 73
B
battery 51, 70
bezel 16, 27
bezel blank 28
bezel key 19
bezel lock 27, 63
bezel, front 16, 28
bezel, removing 27
bezel, tower 27
blanks 16, 28, 29, 30
blue screen event 70
buttons 63, 64
C
cables 31, 32, 59, 60
cabling 59, 60
component identification 63, 70
components 16, 19, 63, 66
connectors 63
controller 19
crash dump analysis 70
CSR (customer self repair) 5
customer self repair (CSR) 5, 16, 19
D
device numbers 65
diagnostic tools 61
diagnostics utility 61
DIMM slot LEDs 71, 72
DIMMs 19, 42, 68
disaster recovery 62
Disaster Recovery, ROMPaq 62
diskette drive 19, 33, 34
diskette drive connectors 68
drive LEDs 65
DVD-ROM drive 19, 34, 63
F
fan connectors 68
fan holder 16, 38
fan LED 72
fans 19, 38, 39, 73
fans, replacing 39
features 63
feet, server 16, 58
front bezel 16, 27
front panel buttons 64
front panel components 63
front panel LEDs 64
front panel/LED board connector 68
front temperature sensor cable 19
front USB cable 19, 33
front USB connectors 33, 68
full-height media drive 19, 35
full-height tape drive 19, 35
H
half-height media drive 19
hard drive backplane 19, 37
hard drive bays 63
hard drive blanks 16, 30
hard drive cable 19
hard drive cable connector 68
hard drive cage 19, 37
hard drive LEDs 65
hard drive, replacing 30
hard drives 19, 30, 37
health LEDs 64, 70, 72
heatsink 19, 43
HP Insight Diagnostics 61
HP Insight Diagnosticts survey functionality 61
Index 78
I
iLO (Integrated Lights-Out) 69
IML (Integrated Management Log) 62
Insight Diagnostics 61
Integrated Management Log (IML) 62
internal health LED 72
internal USB connector 68
K
keyboard connector 66
L
LED, DIMM slot 71, 72
LED, drive activity 64
LED, fan 71, 72
LED, health 64, 72
LED, internal health 64, 72
LED, link/port activity 64, 67
LED, power supply signal 67
LED, processor 71, 72
LED, system power 26, 64
LEDs, front panel 64
LEDs, hard drive 65
LEDs, NIC 67
LEDs, power supply 67
LEDs, PPM failure 71, 72
LEDs, processor failure 71, 72
LEDs, rear panel 67
LEDs, SAS hard drive 65
LEDs, system board 71
LEDs, troubleshooting 65, 71, 72
M
management tools 61
mechanical components 16
media bay blank 29, 63
memory 19, 42
memory slot LEDs 71
mouse connector 66
N
network connector LEDs 67
NIC LEDs 64, 67
NMI switch 68, 70
O
optical device 34
optical drive cable 19
optical drive connector 68
overtemperature LED 71, 72
P
parallel connector 68
part numbers 16, 19
PCI card guide 16, 39
PCI fan 39
PCI slots 71
PCI-X extender board 19, 50
PCI-X extender board components 73
PCI-X extender board connector 68
power button/LED cable 19, 31
power connectors, external 66
power connectors, internal 68
power cord connector 66
Power On/Standby button 26, 63
power supplies 19, 40, 41, 66
power supplies, removing 40, 41
power supply backplane 41
power supply cage assembly 19, 41
powering down 26
PPM failure LEDs 71, 72
preparation procedures 26
processor failure LEDs 69, 72
processor power connector 68
processors 19
R
rear fan 38
rear panel components 66
rear panel connectors 66
rear panel LEDs 67
redundant power supply cable connector 68
required tools 24
RJ-45 network connector LEDs 67
ROMPaq Disaster Recovery 62
S
safety considerations 24
safety information 24
SAS cabling 60
SAS device numbers 65
SAS hard drive cabling 60
SAS hard drive LEDs 65
SATA cabling 60
SATA drives 65
SATA hard drive LEDs 65
Index 79
SATA optical drive 34
serial connector 66, 68
serial number 52
server feet 16, 58
server specifications 74
server, front panel LEDs 64
server, real panel LEDs 67
server, rear panel components 66
spare part numbers 16, 19
specifications, environmental 74
specifications, server 74
static electricity 24
switches 69, 70
system air baffle 16, 39
system battery 19, 68
system board 52, 68
system board battery 51
system board components 68
system board LEDs 71
system components 19
system maintenance switch 68, 69, 70
system power connector 68
system power LED 26
T
T-10/T-15 Torx screwdriver 19, 24
tape drives 35, 36
temperature ranges (environmental) 74
temperature sensor 32
tools 16, 24, 61
tower bezel, removing 27
troubleshooting 61
troubleshooting resources 61
U
USB connectors 33, 63, 66
USB devices 33
USB flash device 19, 36
USB tape drive cable connector 68
utilities 61
V
video connector 66
W
warnings 24, 25
Index 80