Boss Audio Systems 638BA Specifications

STEERING & CONTROLS

POWER A MARK II™ ELECTRONIC

CONTROL SYSTEM

Reliable, Digital, Ergonomically Styled Control Systems.

The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers.

Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards.

The PowerA Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling.

Other standard features include RPM Synchronization, which reduces engine vibration and improves fuel economy, a High Idle feature to increase RPM where higher idle is necessary for cold engine operations, a programmable Trolling Valve Control and neutral Warm Up.

The stylish and ergonomically designed control makes the PowerA Mark II™ suitable for many types of applications ranging from sport boats, yachts, and commercial applications.

Available with or without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system.

With the ability to control up to 2 engines from up to 4 different stations, the PowerA Mark II™ is a modular and flexible system with simple to install components.

The unique programming Module Display of the PowerA Mark II™ provides simple touch pad programming with descriptive information regarding the set up, tuning and diagnostics of the system.

The PowerA Mark II™ is a system that can replace mechanical controls either on fully mechanical engines, or on fully electronical engines, or on engines with the combination of both characteristics.

Technical Features:

• Single Lever/Dual Function and Dual Lever/Dual Function for shift, throttle and trolling

• Up to 4 control stations

• Control boxes IP Protection: IP66

• Power supply: min 9 max 32V

• Working temperature: -25˚C to+ 75˚C

• Control station functions:

• Station Select

• Engine Warm up

• High idle

Single Lever

• Docking

• Engine synchronization

• Trolling valve, on request, according to customer’s specifications

• Electronic throttle outputs:

• Voltage (double output 0 - 5V and 0 - 2, 5V)

• PWM (0-100%, frequency from 200Hz to 1kHz)

• Current (4 - 10mA)

• Digital Throttle Output:

• SAE J 1939

• NMEA 2000

• Trolling valve output

• Voltage (0 - 5V)

• PWM (0-100%, frequency from 100Hz to 1kHz)

• Current (4 - 20mA)

• Electric shift control:

• 2 or 3 ON/OFF or proportional solenoids

• Shift delays fully settable

Dual Lever

•

•

Private protocol Can Bus for data transmission

Suitable for mechanical shift and throttle as well as electronic throttle and shift

• Connection of multiple stations up to 4 controls

• Modular system

• Direct Communication with electronic engines

(SAE J 1939 or NMEA 2000)

• Plug’N Play Connectivity

• Automatic engine synchronization

• Dock assist

• Fully programmable shift delays

• Personalized label upon (special request)

Safety Devices:

• Start in-gear PROTECTION (start inhibition with shifted gear)

• Audible and visual diagnostic failure alarm

(Readable messages on the control unit display)

• Proportional shift delays

• Programmable working parameters

• Meets CEI EN 60945 standards

EMC Certification and CE Mark

Conforms with:

• CEI EN60945

• UNI-EN ISO 11547

Compatibility with all Mechanical Throttle Engines

Compatibility with all Electronic Throttle Engines

• Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini,

VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.

763-00011

763-00021

ORDER NO.

Mfr. No. Description

763-00011 PWA MM11 Single Engine, Single Station Control System, without Trim

763-00011-T PWA MM11T Single Engine, Single Station Control System, with Trim & Tilt

763-00021 PWA MM21 Twin Engine, Single Station Control System, without Trim

763-00021-T PWA MM21T Twin Engine, Single Station Control System, with Trim & Tilt

Kit Add-Ons

763-10001 PWA SS1 Add-On Kit, Single Engine, Single Station, without Trim

763-10001-T PWA SS1T Add-On Kit, Single Engine, Single Station, with Trim & Tilt

763-10002 PWA SS2 Add-On Kit, Twin Engine, Single Station, without Trim

763-10002-T PWA SS2T Add-On Kit, Twin Engine, Single Station, with Trim & Tilt

For more information see www.uflexusa.com

NOTE:

SPECIAL ORDER

ONLY

STEERING & CONTROLS

MARINE STEERING WHEELS

STELLA

All Stella wheels include assembled 3/4" tapered hub (1.75" length) and black plastic center cap. Ergonomically advanced polyurethane wheels.

New

ORDER NO.

Mfr. No. Series Dia. Spoke PU Colour

857-013101 PU013101 Fantasy 13.5" Brushed Black

857-026101-1 PU026101 Folletto 14.2" Polished Black

857-021111 PU021111 Folletto 14" Black w/Burl Inserts Black

For more information see www.schmittsteering.com

STEERING ACCESSORIES

ALIGNMENT VALVE FOR HYDRAULIC TIE BAR

When a Mechanical Tie Bar cannot be used

The Seastar® cylinder alignment valve will allow for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar as opposed to a solid link or a mechanical tie bar.

The standard helm and SeaStar® hoses may be used on vessels not exceeding speeds of 55 MPH. Boats exceeding 55 MPH must use the SeaStar® Pro Helm Pump #HH5770.

(CC Order No. 038-57700) and Seastar® Pro Kevlar® hoses.

ORDER NO.

Mfr. No.

033-54712 HA5471-2

For more information see www.seastarsolutions.com

@

Have a Technical Question?

Contact our Technical Support Staff email: [email protected]

[email protected]

2

INSTRUMENTATION & ELECTRONICS

BOXED SETS By Faria Marine Instruments

Packaged and ready for the display counter.

These Boxed Sets offer a complete set of gauges ready to install.

The INBOARD SET comes with Speedometer and Pitot, Tachometer, Fuel gauge,

Voltmeter, Water Temp gauge, and Oil Pressure gauge

The OUTBOARD SET comes complete with Speedometer and Pitot,

Tachometer, Fuel gauge, and Voltmeter.

ORDER NO.

860-00183

Mfr. No.

Style

KTF0183 Platinum

Description

Outboard Set 4 Gauge

Outboard Set 4 Gauge 860-00182 KTF0182 Spun Silver

860-00184

860-09799

KTF0184 Spun Silver

KT9799 Euro

860-09796 KT9796 Euro

860-09798 KT9798 Euro White

860-09795

860-09797

KT9795

KT9797

Euro White

Dress White

Inboard Set 6 Gauge

Inboard Set 6 Gauge


Inboard Set 6 Gauge


Inboard Set 6 Gauge

860-09794 KT9794 Dress White Outboard Set 4 Gauge

860-10001 KTF001 Chesapeake SS White Inboard Set 6 Gauge

860-10002 KTF002 Chesapeake SS White Outboard Set 4 Gauge

860-10003 KTF003 Chesapeake SS Black Inboard Set 6 Gauge

860-10004 KTF004 Chesapeake SS Black Outboard Set 4 Gauge

For more information see www.faria-instruments.com

AMEGA GAUGE KITS

New

PLATINUM

• Outboard (Speedo - 70MPH (Mech),

Tach (7000 RPM), Fuel Level,

Voltmeter (10-16 VDC)

SPUN SILVER

• Outboard (Speedo - 65MPH (Mech),


Voltmeter (10-16 VDC)

SPUN SILVER

• Inboard (Speedo - 65MPH (Mech),


Voltmeter (10-16 VDC), Water Temp

(100-250F), Oil PSI (80 PSI)

Teleflex Marine is introducing 16 new gauge kits giving you more options to refresh the look of the boat’s dash with crisp, clean, stylish, high quality gauges. Eight of the new kits include a Tach/Hourmeter instead of a regular Tachometer. The other eight kits are for dual engine applications. We eliminate the fuel and speedometer from the kit and include only other parts needed for second engine monitoring.

Hottest selling black dial line! Amega® Domed has clean-looking black dials with white & red graphics plus through-dial and perimeter lighting for great readability.

FEATURES:

• Black dial, red graduations, white numerals, vivid white pointer staff.

• Scratch resistant curved glass lenses, with black, near-flush bezels.

• U.S. and metric scales, with ISO symbols, where appropriate.

• Perimeter and thru-dial lighting.

• A comprehensive array of outboard water pressure instrument kits

• Optional add-on square bezels for modular appearance

(See Gauge Accessories for details).

105-69708

Note: Packaging may be different

ORDER NO.

105-68362

105-68363

105-69722

105-69721


New

68362P Instrument Set OB Contains: Tachometer, Speedo 65 MPH, Fuel Gauge, Voltmeter

68363P Instrument Set IB/IO

Contains: Tachometer, Speedo 65 MPH, Fuel Gauge, Water Temp, Oil Pressure, Voltmeter

69722P Twin Engine Add-On IB/IO Gauge Kit Contains: Tach, Water Temp., Oil Pressure, Voltmeter

69721P Twin Engine Add-On OB Gauge Kit

Contains: Tach, Voltmeter

New

4 Gauge Set

6 Gauge set

4 Gauge Set

2 Gauge Set

105-69708

105-69709

69708P Instrument Set OB w/Tach/Hr Contains: Tach/Hr, Speedo 65 MPH, Fuel Gauge, Voltmeter 4 Gauge Set

69709P Instrument Set IB/IO w/Tach/Hr

Contains: Tach/Hr, Speedo 65 MPH, Fuel Gauge, Water Temp, Oil Pressure, Voltmeter

6 Gauge set


3


860-36005 860-33009

SPUN SILVER

Design Features:

Perimeter-lighted silver dial with bold black graphics, polished stainless steel bezel, contoured black pointer, & domed glass lens.

INSTRUMENT DIAL RANGE DESCRIPTION SENDER SIZE ORDER NO.

Tachometer 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-36004

7000 RPM Universal for all outboard engines (4,6,8,10,12, & 20 pole) Not Required 4" 860-36005

Tachometer with Hourmeter 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-36032

Tach + System Check™ 7000 RPM Gas, J/E Outboard OMC System 4" 860-36050

Operator Warning System Indicator Check™

Speedometer 35 MPH 55 MPH (Mechanical) 4" 860-36009

55 MPH 65 MPH (Mechanical) 4" 860-36010 tube or connection to

Pitot Kit Universal speedometer pickup tube kit with hardware 860-91109

Same as above with 20 feet of tubing 860-91106

Fuel Level Gauge E - 1/2 - F American 2" 860-16001

Hourmeter 10,000 Hours Elapsed time in hours / tenths (12-32 volt) not illuminated Not Required 2" 860-16020

Oil Pressure Gauge 80 PSI American 2" 860-16002

Trim Gauge Up - Down Mercury & Mariner outboards, Mercruiser, Volvo DP,

Yamaha 2001 & newer 2" 860-16016

Johnson / Evinrude, Suzuki outboards 2" 860-16017 on outboard

Voltmeter 10 -16 Volt For all 12 volt electrical systems Not Required 2" 860-16023

Water Pressure Gauge Kit 30 PSI All water cooled outboard & I/O engines Not Required 2" 860-16003

Water Temperature Gauge 100 - 250º F American 2" 860-16004

Gauge Specifications 12 volt, negative ground, internally illuminated unless otherwise noted.

Sending Unit Information American requires standard American or standard Faria sending unit.

Mounting Information 4” tachometers, speedometers, synchronizers, & compasses - Hole Size: 3.375” / 85mm.

All 2” instruments - Hole Size: 2.0625” /53mm.

PLATINUM™


Polished stainless steel bezel, domed fog-resistant lens, perimeter lighted black dial with white and silver graphics. Orange tipped black pointer

Transferable Limited Lifetime Warranty


Yamaha 2001 & newer 2" 860-22003

Johnson / Evinrude, Suzuki outboards 2" 860-22001

Honda outboards (May require harness 93100) 2" 860-22002



4


860-32904 860-32950 860-12901 860-12916

EURO WHITE™


Perimeter-lighted white dial with bold black graphics, black aluminum bezel, contoured black pointer, flat glass lens.


Tachometer 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-32904

7000 RPM Universal for all outboard engines (4,6,8,10,12, & 20 pole) Not Required 4" 860-32905

Tach / Hourmeter 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-32932

Tach + System Check™ 7000 RPM Operator Warning System for ‘96 & newer electric start OMC System 4" 860-32950

Operator Warning System Indicator OMC outboards ( Johnson & Evinrude ) Check™

Requires pitot 860-32909 tube or connection to lower drive unit

Pitot Kit Universal speedometer pickup tube kit with hardware 860-91109

Same as above with 20 feet of tubing 860-91106

Fuel Level Gauge E - 1/2 - F American 2" 860-12901

Hourmeter 10,000 Hours Elapsed time in hours / tenths (12-32 volt) not illuminated Not Required 2" 860-12913

Oil Pressure Gauge 80 PSI American 2" 860-12902

Trim Gauge Up - Down Mercury & Mariner outboards, Mercruiser, Volvo DP,

Requires 860-12916 sending unit 860-12915 on outboard 860-12917 or stern drive 860-12989

Voltmeter 10 -16 Volt For all 12 volt electrical systems Not Required 2" 860-12911


Water Temperature Gauge 100 - 250º F American 2" 860-12904

Transferable Limited Lifetime Warranty

Gauge Specifications 12 volt, negative ground, internally illuminated unless otherwise noted.

Sending Unit Information American requires standard American or standard Faria sending unit.

Mounting Information 4” tachometers, speedometers, synchronizers, & compasses - Hole Size: 3.375” / 85mm.

All 2” instruments - Hole Size: 2.0625” /53mm.


5


GPS SPEEDOMETER

The GPS Speedometer is a drop in replacement for your current speedometer and can be made to match your existing instrumental dash.

GPS information is gathered from an internal GPS antenna.

No external antenna required.

The Faria GPS Speedometer uses a highly accurate

48 channel GPS receiver.

You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today.

Course Over Ground (COG) and actual heading (compass heading over ground) are displayed on the digital LCD.

Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation.

ORDER NO.

Mfr. No.

Description

860-33726 33726 Chesapeake SS Black

860-33826 33826 Chesapeake SS White

860-00049 KTF049 Optional GPS External Antenna

New

KTF049

FEATURES & BENEFITS

• Available in multiple Speed ranges up to 120 MPH, and 130 KPH

• Premium LED back-lit or edge-lit dials

• No external GPS antenna required

• Available LCD displays Compass Rose heading and Actual heading (COG)

• Ultra fast Satellite acquisition time (TTFF)

1 second from Hot Start

• Speed Accuracy of +/- 1 MPH

• Heading Accuracy of +/- 1 degree

• Digital stepper motor driven pointers

• Ideal replacement for speed sensing devices

(pitot tube and paddle wheel) that typically fail over time

• Perfect for slow moving vessels where pitot tubes typically don’t work

• Deutsch connector cases

DEPTH SOUNDERS

•

Depth readings from:

3 to 199 Feet

1 to 61 Meters

0.5 to 32 fathoms

•

Three push buttons for ease of adjustments.

•

“Quick-set” mode for rapid adjustment of settings.

•

Icons provide clear indication of status and alarms.

•

Out-of-range indication

•

Full Range shallow and deep alarms.

• Shallow and deep alarms are both audible and visible to operator.

• Power status stored when power is removed:

- if unit is OFF when key is turned off, it will be OFF when key is turned on.

- if unit is ON when key is turned off, it will be ON when key is turned on.

• Keel-Offset adjustment and indication

ORDER NO.

Style In-Hull

Euro Black™ 860-12851

Euro White™ 860-12951

Coral™ Black 860-13051

*

Chesapeake SS Black™ 860-13751

Dress White™ 860-13151

Chesapeake SS White™ 860-13851

Spun Silver™ 860-16151 *

ORDER NO.

Transom Mount

860-12850

860-12950

860-13050

*

860-13750

860-13150

860-13850

860-16150 *

New

6

The Faria Depth Sounder offers standard 199 foot depth capability, automatic gain control, backlighting for maximum night vision, keel offset, along with deep and shallow alarms. The Faria Depth Sounder is available in all Faria Styles.


INSTRUMENTATION & ELECTRONICS simply. cle arly. be t t er.

FISHFINDERS

600

SERIES™

Model

ORDER NO

Mfr. No.

Display Size

698ci HD SI Combo 688ci HD DI Combo

409-47001

409470-1M

5" Diagonal

409-46001

409460-1M

5" Diagonal

688ci HD Combo with Navionics Chip

*

409-44001-NV

409440-1MNAV

5" Diagonal

Display Pixel Matrix

Display Type

Display Colours/

Grayscale

Sonar - Standard

Sonar Coverage

480H x 640V

Colour TFT

480H x 640V

Colour TFT

256 Colours 256 Colours

Side Imaging®

Down Imaging®

DualBeam PLUS™

20˚, 60˚ & (2) 85˚ @-10db

(Total of 180˚)

Down Imaging® Dual-

Beam PLUS™

75˚,45˚,28˚&16˚@-10db

200/83/455 kHz 455/800/200/455 kHz Sonar Frequency

Sonar Optional — —

Target Separation

Power Output (Max)

Current Draw

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

615mA

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

615mA

480H x 640V

Colour TFT

256 Colours

DualBeam PLUS™

20˚ & 60˚@-10db

200/83 kHz

—

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

615mA

678c HD DI

409-43001

409430-1M

5" Diagonal

480H x 640V

Colour TFT

256 Colours

678c HD

Down Imaging® Dual-

Beam PLUS™

DualBeam PLUS™

75˚,45˚,28˚&16˚@-10db

455/800/200/455 kHz

—

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

615mA

409-41001

409410-1M

5" Diagonal

480H x 640V

Colour TFT

256 Colours

20˚ & 60˚@-10db

200/83 kHz

—

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

615mA

Depth Capability

Temperature

Speed

Backlight

100 ft. (SI/DI), 1500 ft.

Included

GPS Speed Included

Yes

350 ft. (DI), 600 ft.

Included

GPS Speed Included

Yes

1500 ft.

Included

GPS Speed Included

Yes

350 ft. (DI) & 600 ft

Included

Paddlewheel Capable

Yes

1500 ft.

Included

Paddlewheel Capable

Yes

Waterproof Class

Unit Size

- Gimbal Mount

Unit Size

- In-Dash Mount

Mount

Transducer

- Standard

Transducer

Mounting-Standard

Power Input

IPX7

6.9"W x 7.5"H x 4.5"D

Transom

10-20 VDC

IPX7

6.9"W x 7.5"H x 4.5"D

Inside Hull or Transom Inside Hull or Transom Inside Hull or Transom Inside Hull or Transom

10-20 VDC

IPX7

6.9"W x 7.5"H x 4.5"D

10-20 VDC

IPX7

6.9"W x 7.5"H x 4.5"D

IPX7

6.9"W x 7.5"H x 4.5"D

6.9"W x 5.4"H x 1.25"D 6.9"W x 5.4"H x 1.25"D 6.9"W x 5.4"H x 1.25"D 6.9"W x 5.4"H x 1.25"D 6.9"W x 5.4"H x 1.25"D

Quick Disconnect

Optional In-Dash

XNT 9 SI 180T

Quick Disconnect

Optional In-Dash

XNT 9 DI T

Quick Disconnect

Optional In-Dash

XNT 9 20 T

Quick Disconnect

Optional In-Dash

XNT 9 DI T

Quick Disconnect

Optional In-Dash

XNT 9 20 T

10-20 VDC 10-20 VDC

GPS Receiver Internal Internal Internal — —

* Optional 50 kHz transducers available for deepwater use. International models support 200/50 kHz.

*

For more information see www.humminbird.com

Navionics Combo Includes: 2 GB Navionics Chip with activation code. 12 months free downloading from time of activation

7


FISHFINDERS

800

SERIES™

simply. cle arly. be t t er.

Model 899ci HD SI Combo 859ci HD DI Combo 859ci HD XDCombo

ORDER NO.

Mfr. No.

Display Size


409-15001

409150-1M

7" Diagonal

800H x 480V

409-14001

409140-1M

7" Diagonal

800H x 480V

409-13001-NV*

409130-1MNAV

7" Diagonal

800H x 480V

Display Type


Grayscale


Sonar Coverage

Sonar Frequency

Sonar Optional



Current Draw


Temperature

Speed

Backlight

Colour TFT

65,000 Colours

Side Imaging®

Down Imaging®

DualBeam PLUS™

20˚, 60˚ & (2) 55˚ @-10db

(Total of 180˚)

200/83/455 kHz

QuadraBeam PLUS™

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

780mA

150 ft. (SI/DI), 1500 ft.

& 3000 ft.*

Included

GPS Speed Included

Yes

Colour TFT

65,000 Colours

Down Imaging®

DualBeam PLUS™

16˚, 28˚, 45˚ & 75˚ @-10db

455/800/200/455 kHz

—

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

780mA

350 ft. (DI), 600 ft.

Included

GPS Speed Included

Yes

Colour TFT

65,000 Colours

DualBeam PLUS™

20˚, 60˚ & 74˚@-10db

200/83/50 kHz

—

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)

780mA

3000 ft.

Included

GPS Speed Included

Yes


Unit Size

- Gimbal Mount

Unit Size

- In-Dash Mount

Mount

Transducer

- Standard

Transducer


Power Input

IPX7 IPX7 IPX7

11-1/4"W x 6-3/4"H x 4-1/4"D 11-1/4"W x 6-3/4"H x 4-1/4"D 11-1/4"W x 6-3/4"H x 4-1/4"D

11-1/4"W x 6"H x 2-1/2"D

In-Dash or Gimbal

XNT 9SI 180 T

Transom

10-20 VDC

11-1/4"W x 6"H x 2-1/2"D

In-Dash or Gimbal

XNT 9 DI T

Inside Hull or Transom

10-20 VDC

GPS Receiver Internal Internal


** To obtain 1000 watts, optional deep water transducer required.

Features and specifications subject to change without notice.

8

11-1/4"W x 6"H x 2-1/2"D

In-Dash or Gimbal

XNT 9 DB 74 T


10-20 VDC

Internal

* Navionics Combo

Includes:

2 GB Navionics Chip with activation code.

12 months free downloading from time of activation



FISHFINDERS

900™

SERIES

Model 999ci HD SI Combo 959ci HD DI Combo 959ci HD XD Combo

ORDER NO.

Mfr. No.

Display Size


Display Type


Grayscale


Sonar Coverage

Sonar Frequency

Sonar Optional

409-19001

409190-1M

8" Diagonal

800H x 480V

Colour TFT

65,000 Colours

HD Side Imaging®

HD Down Imaging®

DualBeam PLUS™

20˚, 60˚ & (2) 86˚ & (2) 55˚ @-10db

(Total of 180˚)

200/83/455/800/50* kHz

QuadraBeam PLUS™



Current Draw


Temperature

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

780 mA

150 ft. (SI/DI), 1500 ft.

& 3000 ft.*

Included

409-18001

409180-1M

8" Diagonal

800H x 480V

Colour TFT

65,000 Colours

Down Imaging,

DualBeam PLUS™

16˚, 28˚, 45˚ & 75˚

@-10db

455/800/200/455 kHz

—

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

780 mA

350 ft. (DI), 600 ft.

Included

409-17001

409170-1M

8" Diagonal

800H x 480V

Colour TFT

65,000 Colours

DualBeam PLUS™

20˚, 60˚ & 74˚@-10db

200/83/50 kHz

QuadraBeam PLUS™

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)

780 mA

3000 ft.

Included

Speed

Backlight

GPS Speed Included

Yes

GPS Speed Included

Yes

GPS Speed Included

Yes


Unit Size

- Gimbal Mount

Unit Size

- In-Dash Mount

Mount

Transducer

- Standard

Transducer


Power Input

IPX7

11-1/4"W x 6"H x 2-1/2"D

In-Dash or Gimbal

XHS 9 HDSI 180 T

Transom

IPX7 IPX7

11-1/4"W x 6-3/4"H x 4-1/4"D 11-1/4"W x 6-3/4"H x 4-1/4"D 11-1/4"W x 6-3/4"H x 4-1/4"D

11-1/4"W x 6"H x 2-1/2"D

In-Dash or Gimbal

XNT 9 DI T


11-1/4"W x 6"H x 2-1/2"D

In-Dash or Gimbal

XNT 9 DB 74 T


10-20 VDC 10-20 VDC 10-20 VDC

GPS Receiver Internal Internal Internal


** To obtain 1000 watts, optional deep water transducer required. Features and specifications subject to change without notice.


9


FISHFINDERS

1100™

SERIES

Model 1199ci HD SI Combo 1159ci HD DI Combo

ORDER NO.

Mfr. No.

Display Size


Display Type


Grayscale


Sonar Coverage

Sonar Frequency

Sonar Optional

409-23001

409230-1M

10.4" Diagonal

800H x 600V

Colour TFT

65,000 Colours

HD Side Imaging®

HD Down Imaging®

DualBeam PLUS™

20˚, 60˚ & (2) 86˚ & (2) 55˚ @-10db

(Total of 180˚)

200/83/455/800/50* kHz

QuadraBeam PLUS™



Current Draw


Temperature

Speed

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

1.3 Amps

150 ft. (SI/DI), 1500 ft.

& 3000 ft.*

Included

GPS Speed Included

409-22001

409220-1M

10.4" Diagonal

800H x 600V

Colour TFT

65,000 Colours

HD Down Imaging,

DualBeam PLUS™

75˚, 45˚, 28˚ & 16˚

@-10db

455/800/200/455 kHz

—

2-1/2"

500 Watts (RMS);

4000 Watts

(Peak-to-Peak)

1.3 Amps

350 ft. (DI), 600 ft.

Included

GPS Speed Included

Backlight Yes Yes


Unit Size

- Gimbal Mount

Unit Size

- In-Dash Mount

Mount

Transducer

- Standard

Transducer


Power Input

IPX7

13.1"W x 9.3"H x 2.9"D

13.1"W x 8.8"H x 2.9"D

In-Dash or Gimbal

XHS 9 HDSI 180 T

Transom

10-20 VDC

IPX7

13.1"W x 9.3"H x 2.9"D

13.1"W x 8.8"H x 2.9"D

In-Dash or Gimbal

XNT 9 DI T


10-20 VDC

GPS Receiver Internal Internal


** To obtain 1000 watts, optional deep water transducer required.

Features and specifications subject to change without notice.

10

1159ci HD XD Combo

409-21001

409210-1M

10.4" Diagonal

800H x 600V

Colour TFT

65,000 Colours

DualBeam PLUS™

20˚, 60˚ & 74˚@-10db

200/83/50 kHz

QuadraBeam PLUS™

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)

1.3 Amps

3000 ft.

Included

GPS Speed Included

Yes

IPX7

13.1"W x 9.3"H x 2.9"D

13.1"W x 8.8"H x 2.9"D

In-Dash or Gimbal

XNT 9 DB 74 T


10-20 VDC

Internal



FISHFINDERS

ONIX™

SERIES

Model

ORDER NO.

Mfr. No.

Touch Screen

Display Size

Display Pixel

Matrix

Display Type


Grayscale


Sonar Coverage

ONIX 10 SI Combo ONIX 10 Combo ONIX 8 SI Combo ONIX 8 Combo

408-81001

408810-1M

Multi-Touch

10.4" Diagonal

1024H x 768V

Colour TFT

408-80001

408800-1M

Multi-Touch

10.4" Diagonal

1024H x 768V

Colour TFT

408-86001

408860-1M

Multi-Touch

8.4" Diagonal

1024H x 768V

Colour TFT

408-60001

408600-1M

Multi-Touch

8.4" Diagonal

1024H x 768V

Colour TFT

16.7 mm Colours 16.7 mm Colours 16.7 mm Colours 16.7 mm Colours

HD Side Imaging®, HD Down Imaging®, Digital Signal Processing

(DSP), DualBeamPLUS

Digital Signal Processing (DSP)

DualBeamPLUS

HD Side Imaging®, HD Down Imaging®, Digital Signal Processing

(DSP), DualBeamPLUS

20˚, 60˚, 75˚, 45˚, (2) 86˚ & (2) 55˚

@-10db (Total of 180˚)

20˚ & 60˚ @-10db

20˚, 60˚, 75˚, 45˚, (2) 86˚ & (2) 55˚

@-10db (Total of 180˚)

Digital Signal Processing (DSP)

DualBeamPLUS

20˚ & 60˚ @-10db

200/83/455/800/50*kHz 50*/200/83kHz 200/83/455/800/50*kHz 50*/200/83kHz Sonar Frequency

Sonar Optional



Current Draw

NMEA 0183/2000

Built-In


Temperature

Speed

Backlight


Unit Size

- Gimbal Mount

Unit Size

- In-Dash Mount

Mount

Transducer

- Standard

Transducer


Power Input

SM3000

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

—

14"W x 9"H x 4"D

12.25"W x 8"H x 4"D

In-Dash or Gimbal

XT 14 20 HDSI T

Transom

SM3000

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

—

■

150 ft.(SI), 350 ft.(DI),1500 ft.,

5000 ft.* & 10,000 ft.

✯

Included

■

1500 ft., 5000 ft.* & 10,000 ft.

✯

Included

GPS Speed Included

Yes

IPX7

GPS Speed Included

Yes

IPX7

14"W x 9"H x 4"D

12.25"W x 8"H x 4"D

In-Dash or Gimbal

XNT 14 20 T


SM3000

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

—

SM3000

2-1/2"

1000 Watts (RMS);

8000 Watts

(Peak-to-Peak)**

—

■

150 ft.(SI), 350 ft.(DI),1500 ft.,

5000 ft.* & 10,000 ft.

✯

Included

■

1500 ft., 5000 ft.* & 10,000 ft.

✯

Included

GPS Speed Included

Yes

IPX7

GPS Speed Included

Yes

IPX7

12.6"W x 8.25"H x 3.4"D

11"W x 8"H x 3.4"D

In-Dash or Gimbal

XT 14 20 HDSI T

Transom

12.6"W x 8.25"H x 3.4"D

11"W x 8"H x 3.4"D

In-Dash or Gimbal

XNT 14 20 T


10-20 VDC 10-20 VDC 10-20 VDC 10-20 VDC

GPS Receiver Internal 34-Channel Internal 34-Channel Internal 34-Channel Internal 34-Channel


** To obtain 1000 watts, optional deep water transducer required. Features and specifications subject to change without notice.


■ Included ✯ Requires optional purchase of CHIRP Ethernet SONAR module. Features and specifications subject to change without notice.

11


FISHFINDERS

ION SERIES™

ION10

• 10.4" Multi-Function Display

• 1024H x 768V Resolution

Take control of the extreme high-definition XGA LCD Touch Display w/multi-gesture support and bright graphics readable in harsh sunlight.

• Front Dual SD Card Slots & USB Port:

Access advanced cartography, save screenshots, sonar recordings and waypoints.

• Expandable Platform:

Conquer the seas with high-speed Ethernet networking, wireless connectivity and full

NMEA 0183/2000® support. From black box sonar and powerful radar to Autopilot integration and even IP cameras, you can assemble the ultimate angling system.

• Cross Touch™ Interface:

Take command of your display like never before with Cross Touch, exclusive to the ION and ONIX Series. Everything you can do with the touchscreen, you can also do with the touchpad

– so rough conditions will never compromise your control.

• Built-In Web Browser:

Surf the web, monitor weather and stay connected - from the dock, off shore waters

(up to 2 miles with the wireless antenna accessory) and everywhere in between thanks to the exclusive Humminbird Internet Browser, standard on the ION Series.

• Built-In Cartography: TriFuel

• Humminbird RADAR

• Autopilot

• Wireless Connectivity

• Included Navionics Cartography Type

• Platinum/Gold/Hotmaps

Mfr. No. 407840-1M

ORDER NO. 407-84001

ION12

• 12.1" Multi-Function Display

• 1024H x 768V Resolution

Take control of the extreme high-definition XGA LCD Touch Display w/multi-gesture support and bright graphics readable in harsh sunlight.

• Front Dual SD Card Slots & USB Port:

Access advanced cartography, save screenshots, sonar recordings and waypoints.

• Expandable Platform:

Conquer the seas with high-speed Ethernet networking, wireless connectivity and full

NMEA 0183/2000® support. From black box sonar and powerful radar to Autopilot integration and even IP cameras, you can assemble the ultimate angling system.

• Cross Touch™ Interface:

Take command of your display like never before with Cross Touch, exclusive to the ION and ONIX Series. Everything you can do with the touchscreen, you can also do with the touchpad

– so rough conditions will never compromise your control.

• Built-In Web Browser:

Surf the web, monitor weather and stay connected - from the dock, off shore waters

(up to 2 miles with the wireless antenna accessory) and everywhere in between thanks to the exclusive Humminbird Internet Browser, standard on the ION Series.

• Built-In Cartography: TriFuel

• Humminbird RADAR

• Autopilot

• Wireless Connectivity

• Included Navionics Cartography Type

• Platinum/Gold/Hotmaps

Mfr. No. 407510-1M

ORDER NO. 407-51001

12

simply. cle arly. be t t er.



VHF MARINE RADIO

HANDHELD TWO-WAY

VHF MARINE RADIO

New Floating Design

• 10 Hour battery life, TBC mAh NiMH battery

• Submersible JIS7

• 1 /2.5/ 6 watt TX power

• NOAA weather alert Mfr. No. ATLANTIS 270

• Display size: 18mm x 37mm

• Power boost key

• Glow seals & power key

• Includes AC & DC adapters, charging cradle

ORDER NO. 817-00270

For more information see www.uniden.com

CELLULAR ACCESSORIES

CELL PHONE BOOSTER KIT

TM

AURA CA-VAT

The AURA Cellular Booster Kit enables you to optimize cellular coverage on your boat or in your home where reception is weak due to distance from cell tower, topography or building materials.

Its compartmentalized design, sturdy metal casing ensures enhanced call clarity that will last for years. This kit enhances 3G voice and data for all major U.S. carriers and will support 5-10 simultaneous users in a 50 ft. wide by 100 ft. long direction, for total coverage of 5,000 square ft.

The kit comes with indoor and outdoor antennas, cell booster and cabling for a complete cellular enhancement solution. The AURA Booster features adjustable dials for pinpoint enhancement and features an indoor panel antenna to direct coverage where it’s needed most. This kit also features an industry-leading 2-year manufacturer’s warranty.

Mfr. No. CA-VAT

ORDER NO. 276-54990

MARINE TV ANTENNA

FLAT PANEL MARINE TV ANTENNA

2060

This razor-thin, multi-directional amplified TV antenna is the most advanced dual band

(VHF/UHF) antenna on the market. Designed with our revolutionary Clear Circuit Technology™, the embedded amplifier is able to amplify 100% of the signal at the element to maximize channel reception and minimize pixilation and dropouts for the best viewing experience possible. It is designed for the mobile lifestyle and can be used on marine vessels, RVs, pop-up campers, and more! Watch your favorite progams for free and in 1080 HD!

•

•

•

This digital TV antenna is best suited for areas up to 15 miles from broadcast towers.

No assembly required

Low Noise Amplifier

15' mini Coaxial Cable

(Attached to Antenna)

& 2 Suction cup clips are included

• Receives ALL local HD broadcast signals

• AC, DC and USB power adapter

• Multi-directional

Technical Specifications:

High VHF/UHF

Weight: 0.34 lbs.

Dimensions: 13" x 12"

Housing: 0.6" thick

Antenna Element: 0.17" thick ORDER NO. 276-20600 Mfr. No. 2060

For more information see www.shakespeare-marine.com

13


RECEIVER AND SPEAKER COMBO

MCK752WB.64

BLUETOOTH® - ENABLED IN-DASH

SINGLE-DIN MARINE

MP3-COMPATIBLE CD AM/FM RECEIVER

MR752UAB (Receiver), 2 Pair of MR6W (Speakers) & MRANT10 (Antenna)

FEATURES:

•

•

•

•

•

•

•

• Chassis Mounting: Single DIN

• Detachable Front Panel

• ID3-Tag

• Disk Player Mechanism: MP3

• Disk Player Compatible: MP3, CD, CDR, CDRW, WMA • Loudness

• USB Input: Full Size Front Panel

SD/MMC Memory Card Port Input: Behind Panel

RDS (Radio Data System)

AUX Input: Front panel

Audio RCA Output: 4

Illumination Buttons

Preset Equalizer Selection Switch

Separate Bass and Treble Adjustment Control

• Balance and Fader Adjustment Control

• Mute

• Stereo/Mono Selection Switch

• Local Distance Switch

• Digital Clock Display

• Last Position Memory

• ESP (Anti Skip Mechanism)

• 1-bit D/a Convertor

• 8x Oversampling

• Remote Control

• Speaker Outputs Channels: 4

• Total Output Power: 240 Watts

Mfr. No. MCK752WB.64

ORDER NO. 988-75200-64

SPEAKERS

MRBT200

WIRELESS BLUETOOTH® - ENABLED

PORTABLE MARINE SPEAKER SYSTEM

With an IPX4* water resistant exterior, the BOSS Marine Bluetooth portable speaker is the perfect audio device for all action sports and outdoor enthusiasts to take anywhere.

It’s rugged, shock absorbent, and has a certified water resistant exterior. This lightweight

MRBT200 is built for the outdoors and aquatic environment.

FEATURES:

• Water Resistant Construction

• Auto Pairing

• Audio Streaming

• Hands-Free Calling

• USB Cable (Included)

• USB Charging

• 3.5mm Aux-In (Aux Cable Included)

• Up to 8 hours of Playback

• Built-in Microphone

• Track Control

• Li-ion Rechargeable Battery

• Range: up to 33 ft. (10 m)

• Volume Control

*IPX4 - Protected against splashing water from any angle. It is not intended to be submersed completely in water.

Mfr. No. MRBT200

ORDER NO. 988-00200-00

For more information see www.bossaudio.com

14


MR4.3W

4" – 3-WAY INDOOR/OUTDOOR

BOX SPEAKER

200 Watts (White)

SPECIFICATIONS:

• Total Power: 200 Watts

• System Impedance: 4 Ohms

• Frequency Response: 80 Hz to 18 kHz

• Sensitivity @ 1W/1 m: 85dB

Components

• Number of Tweeters: 2

• Tweeter Size: (2) 1" Material: Mylar Dome

Mounting Options

• Swivel Bracket

Sold in pairs

Mfr. No. MR4.3W

ORDER NO. 988-00043-00

MARINE AMPLIFIERS

MR1200PA and MR800 amplifiers feature a unique rubber door, which tightly seals all control panel openings when not in use. It also uses in-line weatherproof connectors for all input and output connections, which are run through grommeted openings in end panels.

MR1200PA

4-CHANNEL MARINE POWER AMPLIFIER

1200 Watt Max Power

Public Address System with Microphone

SPECIFICATIONS:

• Power @ 4 Ohms (RMS): 150 W x 4

• Power @ 2 Ohms (Max): 300 W x 4

• Bridged Power (4 Ohms): 600 W x 2

• Dimensions: 12-3/4"L x 7-3/8"W x 2-1/4"H

Mfr. No. MR1200PA

ORDER NO. 988-01200-00

MR800

2-CHANNEL MARINE POWER AMPLIFIER

800 Watt Max Power

Public Address System with Microphone

SPECIFICATIONS:

• Power @ 4 Ohms (RMS): 125 W x 2

• Power @ 2 Ohms (Max): 400 W x 2

• Bridged Power (4 Ohms): 800 W x 1

• Dimensions: 8-3/4"L x 7-14"W x 2-1/4"H

Mfr. No. MR800

ORDER NO. 988-08000-02

For more information see www.bossaudio.com

15


STEREOS

CPM100 STEREO PACKAGE

AM/FM/USB/COMPACT STEREO

6.5" COAXIAL TWO WAY SPEAKERS

/ AUXILIARY AUDIO INPUT JACK

KEY STEREO FEATURES KEY SPEAKER FEATURES

•

•

• 160 watts (40W x 4) • Max power handling: 60 watts

• Compact 3" diameter, self-contained design • Magnet: 8.4 oz

• IPX6 waterproof rating

• Mounts in 3" hole

• Full four channel output

• USB input for MP3 enabled devices

Rear AUX audio input (RCA)

Rear line-out audio (RCA)

•

•

• Mounting hole diameter: 5"

• Mounting depth: 2-1/3"

Tweeter type: Dome

Tweeter material Mylar

• ASTM B117 Salt Spray Exposure Standard Compliant

• ASTM D4329 UV Exposure Standard Compliant

• Audio tone, balance and fader controls • Overall Dimensions: 3" Diameter x 3.35" Depth

KEY JPORT FEATURES

• 1/8" auxiliary input with 9 ft. RCA cable, includes 3 ft. connection cable for iPOD/MP3 player

JHD40BTR HEAVY DUTY STEREO

AM/FM/WB/USB WATERPROOF BLUETOOTH STEREO

KEY FEATURES

• Maximum power output: 160W (4x40W)

• Receives Bluetooth streaming audio (A2DP) and controls (AVRCP) BT enabled devices

• Waterproof (IPX6)

• 7-channel NOAA Weatherband tuner

• AM/FM electronic tuner (US/Euro)

• 30 programmable station presets (18FM, 12AM)• Auto-store/Preset scan

• iPod/iPhone ready via USB (rear pig tail)

• Two wire power (ground, +12VDC switched)

• Line level audio out (rear RCA pair)

• Auxiliary audio input (rear RCA pair)

• Multiple mounting capability; front flush mount, rear flush mount and surface mount with AMPS pattern

• White LED backlit dot matrix LCD display and buttons

• AMP remote turn on (12V @500mA)

• Wired remote control ready (Harley Davidson ™ Compatible)

• Low battery warning

• Conformal coated circuit boards

• UV-resistent finishes/materials (meets ASTMD4329)

• Corrosion resistant materials (meets ASTMB117)

• Overall Dimensions: 6.56"L x 4.09"W x 0.67"D

Mfr. No. CPM100

ORDER NO. 688-00300-CP

Mfr. No. JHD40BTR

ORDER NO. 688-00400

SPEAKERS

MS6007BR

6.5" WATERPROOF COAXIAL SPEAKER

Mfr. No. MS6007BR

ORDER NO. 688-60070-1

16

KEY FEATURES

• Max power handling: 60 Watts Sensitivity: 91dB

• Frequency: 75Hz-20kHz

• Nominal impedance: 4 Ohms

• Polypropylene woofer: 6-1/2"

• Magnet: 9.8 oz.

• Mounting Hole Diameter: 5"


• Tweeter type: Dome

• Tweeter material: Titanium

• One-piece plastic chassis with integrated drip-edge

• Voice coil size: 1"

• Suspension/Surround: Rubber



For more information see www.asaelectronics.com


SPEAKERS continued...

MSX60CPR

6.5" COAXIAL SPEAKER

KEY FEATURES

• Max power input: 75 Watts

• Frequency response: 65Hz-20kHz

• Bridged/suspended tweeter

• Polypropylene cone

• Rubber suspension/surround

• Magnet weight: 11 oz.

• High polished chrome grille

• Water and corrosion resistant sealed design

• All plastic chassis construction

• UV resistant (ASTM-D4329 compliant)



Mfr. No. MSX60CPR

ORDER NO. 688-60060-1

For more information see www.asaelectronics.com

MSX60RVR

6.5" COAXIAL SPEAKER

KEY FEATURES

• Max power handling: 75 Watts

• Sensitivity: 91dB

• Frequency: 65Hz-20kHz

• Nominal impedance: 4 Ohms

• Polypropylene Woofer: 6-1/2"

• Magnet weight: 11 oz.



• Tweeter type: Dome

• Tweeter material: Titanium



Mfr. No. MSX60RVR

ORDER NO. 688-60060-2

@




17


FISHFINDER ACCESSORIES

ELECTRONIC MULTI MOUNT

The AP-MT4NYL is constructed of nylon reinforced composite making it our lightest and most affordable electronics mount yet. It features the unmatched strength and durability that Anglers Pal mounts are known for at a very affordable price!

MT4 models are our lowest profile units which allows you to mount your electronics in the tightest spots! Comes complete with stainless steel mounting hardware.

Mfr. No. AP-MT4NYL

ORDER NO. 934-00004N

Nylon

For more information see www.marinetechproducts.com

ELECTRONIC ACCESSORIES

3 TIP

USB CHARGING CABLE

COUNTER

DISPLAY BOWL

50 PIECES

Charges almost any Handheld Device!

Product Features:

• Works with Micro USB, Mini USB, and Apple 30-Pin devices

• Super small with a retractable cord for less mess

• Interconnected tips to prevent loss

Mfr. No. CWP-USBBOWL-AMM

ORDER NO. 906-93178

USB PORTABLE

CAR CHARGER

COUNTER DISPLAY

BOWL

50 PIECES

Quick Charge


• 1000mAh, 12 volts

• Available in many colours

• Works with most portable devices

• USB charging cord not included

Mfr. No. CWP-USBBOWL-DC

ORDER NO. 906-92874

18

USB

AC PORTABLE CHARGER

COUNTER

DISPLAY BOWL

30 PIECES

Quick Charge


• 1000mAh

• Available in many colours

• Works with most portable devices

• USB charging cord not included USB

Mfr. No. CWP-USBBOWL-AC

ORDER NO. 906-91938

KNIT TOUCHSCREEN

GLOVES


• Knit: One size fits most

• 95% Acrylic, 5% Spandex

• Works on touchscreen devices: cell phones, tablets, smart phones, digital cameras, eReaders, navigation units, and more

• Three active touch screen fingers on each hand

• Solid black with grey tips - 23 cm

Mfr. No. BTP-GLV-BLACK

ORDER NO. 905-91709

For more information see www.bossgloves.com

LIGHTING & ELECTRICAL

BATTERY ACCESSORIES

SAVIOR BATTERY CASES

Each Savior battery case incorporates a patent-pending system called ShockStop Technology.

This system has been designed to absorb and dissipate violent shock and vibration, allowing your battery to ride smoother and last longer! Since boats have no suspension system, a battery case without ShockStop Technology will do nothing to protect your battery from dying an early death.

Shock & Vibration

• Shock and vibration are two leading causes of premature battery failure

Over Heating

• Savior has an open-air design to allow for proper ventilation of the battery’s gases.

The open-air design allows the battery to breath naturally, preventing over-heating, another cause of battery failure that a closed battery box may experience

Regulations

• Savior has been specifically designed and engineered to comply with all ABYC standards and regulations, as well as USCG reg. 183.420 concerning batteries.

Each Savior model has a unique machined pocket that both captures the battery and catches incidental spillage should it occur!

ORDER NO. Mfr. No. Description

913-40100 SAVIOR-100 Battery Case, OPTIMA - D31M

913-40105 SAVIOR-105 Battery Case, OPTIMA - D34

913-40110 SAVIOR-110 Battery Case, SERIES 27



D31M SAVIOR-100

Battery not included

D34 SAVIOR-105


SERIES 27 SAVIOR-110


For more information see www.stingrayhydrofoils.com

@




19


STANDARD WEATHER RESISTANT

CONTURA® V ROCKER SWITCHES

• Non-corrosive plastic construction

• Protects against dust and prolonged spray to IP66 and IP68 standards

• Meets UL 1500, ISO 8846 ignition protection requirements

• Supplied with neoprene mounting gasket

• Removable actuators

• Brass blade terminals, silver contacts – Rated: 20 amps @ 12VDC

ORDER NO.

Mfr. No.

051-19210 RK19210

051-19220 RK19220

051-19230 RK19230

051-19240 RK19240

051-22180 RK22180

051-22290 RK22290

Description

ON-OFF SPST

ON-OFF-ON SPST

MOM-ON-OFF SPST

MOM ON-OFF-MOM ON DPDT

Actuator, Black Contura® V (2ea)

Actuator Removal Tool

Circuit Diagram

See Circuit Diagram #12




051-22290

IIIUMINATED WEATHER RESISTANT

CONTURA® V ROCKER SWITCHES

• Non-corrosive plastic construction

• Protects against dust and prolonged spray to IP66 and IP68 standards

• Meets UL 1500, ISO 8846 ignition protection requirements

• Supplied with neoprene mounting gasket

• Removable actuators

• Brass blade terminals, silver contacts – Rated: 20 amps @ 12VDC

ORDER NO.

Mfr. No.

051-19310 RK19310

051-19320 RK19320

051-22190 RK22190

051-22200 RK22200

051-22290 RK22290

Description

ON-OFF SPST

Circuit Diagram


ON-OFF-ON SPST See Circuit Diagram #10

Actuator, Black Contura® V with Lens (2ea)

Actuator, Black Contura® V with 2 Lens (2ea)

Actuator Removal Tool

051-22290

EMERGENCY ENGINE CUT-OFF SWITCH

UNIVERSAL CUT-OFF SWITCH LANYARD

• Replaces: Honda, Mercury, Mariner, BRP, Yamaha, Suzuki, OMC

ORDER NO.

Mfr. No.

051-28850 MP28850


20


12 VOLT ACCESSORIES

DELUXE POWER SOCKET - 12 VOLT

Stamped Brass/Injection Molded Nylon & ABS

ORDER NO.

Mfr. No. A B C Amps

424-26120 426120-1 1-15/16" 1-1/2" 1-1/16" 16

DUAL POWER SOCKET - 12 VOLT

Stamped Brass/Plastic

ORDER NO.

Mfr. No. A B C D

424-26130 426130-1 4-3/8" 1-7/16" 2-3/8" 1-1/16"

Dual Power Socket allows two separate 12 volt devices to be operated at the same time using a power socket or cigarette lighter. Has internal 3 amp fuse. LED indicator light. 12 volt, sockets rated at 16 amps.

ELECTRICAL TOOLS

A

MINI TORCH

Plastic

B

ORDER NO.

Mfr. No. A B

424-29590 429590-1 3" 1-1/4"

Mini Torch is refillable. Great addition to any tool box.

FLAMELESS HEAT GUN WITH WIND GUARD

Plastic

ORDER NO.

Mfr. No. A B

424-29595 429595-1 4-3/4" 4"

Flameless Heat Gun with wind guard is refillable using a common cigarette lighter. Great addition to any tool box.

BATTERY ACCESSORIES

BATTERY TERMINAL COVERS

Injection Molded PVC

A

B

LED FINGER LIGHT

Plastic

Cable Colours

ORDER NO.

Mfr. No. A B C D Gauge in Pair

424-15110 Pair 415110-1 1/2" 1-5/8" 1-11/16" 2-7/8" 4,2,1 Red/Black

424-15115 Pair 415115-1 5/8" 1-5/8" 1-11/16" 2-7/8" 1/0, 2/0 Red/Black

LED LIGHTING

B A

ORDER NO.

Mfr. No. A B LED Colour

424-01959 401959-1 1-5/8" 1/2" White, Red, Green

LED Finger light is great for tight places and can be easily attached to any tool with its velcro strap.

For more information see www.sea-dog.com

21


LED NAVIGATION LIGHTS

SERIES 34 LED NAVIGATION LIGHTS

The latest LED generation in an attractive and slim design.

Totally maintenance-free

• Housing: Polycarbonate, seawater resistant, UV protected,

non-corrosive, non-magnetic, impact and shock resistant

• Voltage: 12V, 24V

• Electric: Multivolt, invers polarity protection included,

EMC tested, with degradation control, LED(s) included

• Optics: Visibility 2 nm. (Masthead 3 nm)

Innovative lens technology for wide visibility requires

only one or two light-emitting diode(s) (depending on product)

• Protection: IP 67

Model No. 34000-7 Model No. 34400-7


639-34000 34000-7 All-Round Light, Black

639-34400 34400-7 Masthead Light, Black with quicfits mounting system

639-34410 34410-7 Masthead Light/ Anchor, Black with quicfits mounting system

639-34606 34606-7 Tricolour Light, Black with quicfits mounting system

639-34706 34706-7 Tricolour Light/ Anchor, Black with quicfits mounting system

Model No. 34410-7 Model No. 34606-7

Angle Mounting Watts

360˚ Deck 1.0W

225˚ Deck 2.1W (Masthead)

225˚ Deck 2.1W (Masthead)

360˚ 1.0W (Anchor)

112.5˚/112.5˚/135˚ Deck 1.9W

Model No. 34706-7

Vessel Size

< 20 Meters

< 20 Meters

< 20 Meters

< 20 Meters

112.5˚/112.5˚/135˚ Deck 1.9W (Masthead)

360˚ 1.0W (Anchor)

< 20 Meters

For more information see www.aquasignal.net

RUB RAIL MOUNTED


• 3-Watt Port (Red) and Starboard (Green) LEDs

• Low draw, less than 0.25 amperes

• Enables more deck space

• Easy installation

• Reliable long-life LEDs will provide years of maintenance-free service

• Designed to fit the popular TACO V21-9659

Rigid Vinyl Rub Rail (1-5/8"H x 5/8"W) (CC No. 305-219659-20B), see page 769 in CC Marine 2013/2014 Catalogue

• For use on 20' - 35' boats

• 120˚ unobstructed view

• Meets ABYC/USCG requirements

• Low-voltage 12-14VDC

Mfr. No. F38-6600

ORDER NO. No. 305-38660

For more information see www.tacomarine.com

ORDER NO.

Mfr. No.

558-02107 585-0210-7

22

LED DOCKING LIGHTS

• Rated at 50,000 Hours service life

• Shock and vibration proof

• Corrosion resistant and waterproof

• Front Light utilizes 2 high-power LEDs

• Side Light contains 8 LEDs that are operated independently from front lights

• Light spread of 160˚

• Mirror polished finish

• Stainless steel cover and mounting screws

• Installation requires only 1/2" hold for wire leads and 4 pilot holes for mounting screws

• USCG compliant, NMMA tested

Dimensions: 9.66"L x 4.7"W x 0.95"D

Sold in pairs

For more information see www.innovativelight.com


BAYONET BASE Non-polarity Sensitive


UNDERWATER TRIM TAB LIGHTING

FLEXIBLE STRIP LIGHTING

FLEXIBLE WATERPROOF STRIP LIGHTING

RIGID UNDER-CABINET LIGHT STRIPS

For more information see www.luxorlighting.net

23


3

ORDER NO. 001-43006

ORDER NO. 001-43012

ORDER NO. 001-43008

ORDER NO. 001-43020

24

ORDER NO. 001-43021

For more information see www.promariner.com


BATTERY CHARGER

P12 BATTERY CHARGER LED REMOTE

LED Indicators

• Charging LED- Quick check for green light confirms charging

• Charge Stage- Displays charging stage

• Equalize LED- Indicates the charger is currently in equalization mode

• Fan Mode- Indicates charger's internal fan mode

• Charge Output- Displays the percentage of output current for each battery.

Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations.

• Alert- Icon LEDs provide warning and alert status for quick diagnostics

Four Control Buttons

• Fan- User adjustable settings

• Dim/ Alarm- Provides adjustment to brightness of LEDs on display as well as Silence function for alarms.

• Output- User adjustable charger output when AC source limitations exist that require lowering the AC current draw.

• Power- Places P12 Battery Charger into standby mode

For more information see www.bluesea.com

ORDER NO.

Mfr. No.

738-75200 7520

DIGITAL VOLTAGE SENSING RELAY

DVSR: Dual Battery charging Made Easy

The Digital Voltage Sensing Relay (DVSR) allows the charging of a second battery bank from any single charging source.

When the voltage on the charged bank rises sufficiently, the DVSR engages allowing the 2nd battery bank to charge. When charging stops and voltage falls, the DVSR automatically isolates the battery banks, ensuring that engine start batteries are kept fully charged. Digital circuitry provides superior reliability and extremely low power consumption.

• Safely charge two or more independent battery banks from one charge source (alternator, battery charger…)

• Charges engine starting batteries before combining auxiliary bank for charging

• Protects start batteries from becoming flattened by domestic loads

• Isolates electronics from harmful electrical surges from starter motors

• Simple to install 3 wire connection, leaves alternator wiring intact

• No volt drop vs. diode isolators

• Ignition protected

• Surface or panel mountable

• Replaces previous models 710-125A and 710-125A-DS

Dimensions: 2.75"L x 2.75"W x 2"H (69 X 69 X 50 mm)

Replaces 710-125A

2011 Digital Enhancements:

• Multi voltage, auto selects between 12 and 24V DC operation

• Digital circuits provide very low power consumption and enhanced performance

• Remote sensing circuitry allows optional connection from ignition switch, provides same functionality as single sense

VSR and zero power consumption when engine is off

• Zero stand by current draw when remote sensing circuit utilized with storage mode switch fitted (switch in open position)

• Remote status LED output option

ORDER NO. Mfr. No. Volts Rating (A) Rating (A) Engages Disengages

Continuous Continuous (V DC) (V DC)

770-71140 710-140A 12/24 125 140 13.4/26.8 12.8/25.6

For more information see www.bepmarine.com

25


PRIMARY CABLE-UL1426

Tinned Boat Cable

16 AWG WIRE

ORDER NO.

Length Color

421-82003 25' Black

421-02010 100' Black

421-02050 500' Black

421-02110 100' Dk Blue

421-02210 100' Brown

421-82303 25' Green

421-02310 100' Green

421-02410 100' Grey

421-02510 100' Orange

421-02610 100' Pink

421-02710 100' Purple

421-82803 25' Red

421-02810 100' Red

421-02850 500' Red

421-82903 25' White

421-02910 100' White

421-03010 100' Yellow

421-03050 500' Yellow

New

Size

WINDSHIELD WIPER ARMS

DELUXE WIPER ARMS

ORDER NO.

Mfr. No . DESCRIPTION

856-33650 33650 Wiper Arm, Deluxe, "J" Hook Tip, 12" - 18"

856-33651 33651 Wiper Arm, Deluxe, "J" Hook Tip, 19" - 24"

856-33660 33660 Wiper Arm, Deluxe, Adj. "J" Hook Tip, 12" - 18"

856-33661 33661 Wiper Arm, Deluxe, Adj. "J" Hook Tip, 19" - 24"

856-33670 33670 Wiper Arm, Deluxe, Pantograph, 12" - 18"

856-33671 33671 Wiper Arm, Deluxe, Pantograph, 19" - 24"

WIPER ARM FOR STANDARD MOTOR

ORDER NO.


856-33680 33680* Arm,10-1/2" - 14" for Standard Motors

*Replaces Model # 30100

DELUXE WIPER BLADES

ORDER NO.


856-33011 33011 Wiper Blade, Deluxe, 11"







26

33680

COAX CABLE FITTINGS

UHF CONNECTORS

Twist UHF Male Plug (PL259)

ORDER NO. Mfr. No. Wire Size

422-02176 ea 202176 RG8X

Double Female (PL258)

ORDER NO. Mfr. No.

422-00258 ea 200258

Solder on UHF Male Plug (PL259)

ORDER NO. Mfr. No. Wire Size

422-00259 ea 200259 RG8U

For more information see www.marinco.com

33650

33660

33670

For more information see: www.schmittsteering.com/ www.ongaromarine.com


TRUMPET HORNS

MAXBLAST SINGLE TRUMPET HORN - 12 VOLT

Stamped 304 Stainless w/Over Molded Motor Housing

5 YEAR WARRANTY

ORDER NO.

Mfr. No. Type A B Amps dB Finish

424-31510 431510 Single 16" 4" 4 118 Stainless

Meets ABYC standard A-23, for use on vessels under 39'.

MAXBLAST DUAL TRUMPET HORN - 12 VOLT

Stamped 304 Stainless w/Over Molded Motor Housing

5 YEAR WARRANTY

ORDER NO.


424-31520 431520-1 Dual 18-1/4" 7" 8 123 Stainless

Meets the U.S. Coast guard’s C.O.L.R.E.G.S. and U.S. Inland Navigation Rules, Annex III Regulations for boats up to 20 meters/66 ft.

AIR TRUMPET HORN

MAXBLAST AIR HORN - MINI SINGLE TRUMPET

Chrome Plated Brass/Powder Coated Brass

ORDER NO.

Mfr. No. Type A B PSI Amps dB

424-32610 432610-1 Single 9-5/8" 2-3/4" 9-11 20 123

Includes compressor, air tubing, fittings, and mounting hardware.

Finish

Chrome

MINI COMPACT HORNS

SINGLE MINI COMPACT HORN - 12 VOLT

Stamped 304 Stainless Cover

ORDER NO.


424-31110 431110-1 Single 3-5/16" 3-5/8" 4 110 Stainless


A

SONIC MINI COMPACT HORN - 12 VOLT

ASA Plastic Cover B

ORDER NO.


424-31152 431152-1 Single 3-3/8" 4-3/8" 3 106 White


DROP-IN HIDDEN HORN

V.3 WITH GRILLS - 12 VOLT

ASA Plastic Cover

B

D

ORDER NO.

Mfr. No. Type A B C D Amps dB

424-31250 431250-1 Single 5-1/4" 3-3/8" 4" 1-1/2" 4 111

Includes 431255 horn plus 431351 chrome grill and 431352 white grill.

V.3 Horn meets ABYC standard A-23. For use on vessels under 39'


Grill Finish

Chrome & White

27

SAFETY EQUIPMENT & LIFEJACKETS

EMERGENCY DISTRESS FLARE KITS

SUPER-8

• C12T-B4 and ECONO4 stored in a floatable, waterproof bag

• 4 TYPE-B and 4 TYPE-C

• Exceeds Transport Canada approval for pleasure craft greater than

6m (19'8") in length but no greater than 8m (26'3") in length

ORDER NO. 977-00008

Mfr. No. SUPER-8

For more information see: www.cilexplosives.com

SUPER-12

• C12T-B6 and ECONO6 stored in a floatable, waterproof bag

• 6 TYPE-B and 6 TYPE-C

• Transport Canada approval for pleasure craft greater than

8m (26'3") in length but no greater than 12m (39'4") in length

ORDER NO. 977-00012

Mfr. No. SUPER-12

PET LIFEJACKETS

DOGGY LIFEJACKET - RACING FLAMES SERIES

Features & Benefits of the Paws Aboard Pet Life Jacket

Paws Aboard Pet Lifejacket and Designer Pet Lifejackets provide ultimate buoyancy and high visibility to keep pets safe on the water. Constructed to provide buoyancy, along with a cozy secure fit, the Paws

Aboard Pet Lifejackets features: An advanced breathable mesh underbelly for proper draining and drying, which provides your dog more comfort and healthier conditions than traditional pet life jackets, which can cause heat exhaustion and chafing.

• New reflective strips for maximum visibility

• Bright colors and unique designs

• Handle on top for quick and easy grabbing

• Adjustable nylon straps

• Quick-release buckles

• Heavy-duty yet more comfortable Velcro® fastening system around the belly and neck to keep securely fastened

PET PLAY TOYS

DOGSAVERS™ RETRIEVER TOYS

It even floats for fun summer water games!

Dogsavers™ Retriever toys are perfect for tossing, flinging and chewing!

These bright candy coloured and scented toys are constructed of super durable rubber, ideal for medium chewers and rambunctious fetchers.

Note: Comes in assorted colours and cannot be specified.

Small 7"

ORDER NO. 987-33038 Mfr. No. 33038F

Large 11"

ORDER NO. 987-33040 Mfr. No. 33040F Limited Quantities

For more information see www.pawsaboard.com

28

ORDER NO.

987-91100

987-91200

987-91300

987-91400

987-91500

987-91600

Mfr. No.

F1100

F1200

F1300

F1400

F1500

F1600

Size

XXS, 2-6 Lbs.

XS, 7-15Lbs.

Small, 15-20 Lbs.

Medium, 20-50 Lbs.

Large, 50-90 Lbs.

XLarge, Over 90 Lbs.

SAFETY EQUIPMENT & LIFEJACKETS

FIRST AID KIT

MINI FIRST AID KIT

Meets all of Health Canada’s regulations. Handy for any size boat.

53 items for small to medium wounds

• Plastic durable white snap lid case with integrated handle

• Can be mounted

Size: 8.25"L x 5.5"W x 3"D

ORDER NO. 561-79803 Mfr. No. 7928-0300

KIT INCLUDES:

• 1 - Abdominal/CombinePad - 5" x 9"

• 2 - Telfa Non-Adherent Pads - 2" x 3"

• 1 - Adhesive tape - 0.75" x 1 yds

• 2 - Cotton-Tipped Applicators 2/pk - 3"

• 2 - Tongue Depressors - 3/4" x 6"

• 1 - Elastic Compression Bandage - 2" x 5 yd

• 3 - Fabric Bandages - 7/8" x 3"

• 1 - Conforming Stretch Bandage, sterile - 2" x 4 yds

• 2 - Fingertip Fabric Bandages - 1-3/4" x 2"

• 2 - Gauze Pads - 3" x 3"

• 2 - Knuckle Fabric Bandages - 1-1/2" x 3"

•

8 - Plastic Adhesive Bandages - 3/4" x 3"

• 1 - First Aid & Emergency Care Guide

•

1 - Scissors - 4-1/8"

• 1 - Instant Cold pack, large - 6" x 9"

•

3 - After Bite Treatment Swabs

• 8 - Alcohol Antiseptic Swabs

•

6 - Benzalkonium Chloride Antiseptic Towelettes

• 3 - First Aid Cream - 0.03 oz.

•

1 - Water Gel, Cool Gel - 0.8 oz.

• 2 - Splinter-Out

SAFETY KITS AND ACCESSORIES

FLOATING LANYARDS

& CARD SAVER

Floating lanyards use flexible tubing to provide float protection.

Kit includes:

• Floating wrist lanyard

• Floating neck Lanyard

• Fox40 sonik blast CMG® pealess whistle

• Carabiner clip (non-locking aluminum)

• Plastic waterproof pouch holds cards, money, boat licence

ORDER NO. 561-79809 Mfr. No. 7928-0900

PADDLERS SAFETY PACK

Ultimate safety kit for your kayak, canoe or small boat

Kit includes:

• Micro first aid kit

• Fox40 micro pealess safety whistle

• 50 ft. (15 m) woven polypropylene Fox40 marine rope

• LED light

• Bilge sponge

• Clear waterproof screw-top container / bailer

• 2 glow sticks

• Compass

• Dry bag

ORDER NO. 561-79802 Mfr. No. 7928-0200

For more information see www.fox40world.com

STRAP & CARABINER

Can attach to almost anything, a belt loop, a backpack or PFD

Kit includes:

• Made from durable material

• Quick release clip

• Carabiner and brass key ring

• Imprinted with FOX40 logo

• Sold individually with retail handtag

ORDER NO. 561-79800 Mfr. No. 7928-0000

29

MOTOR ACCESSORIES & SPARK PLUGS

STATIONARY OUTBOARD MOTOR BRACKETS

FOR 4-STROKE MOTORS

• Fixed height for auxiliary or trolling motor - 4 stroke

• 304 stainless brackets and hardware

• Mounts to transom

• Motor safety cable included

• Up to 30 hp - 263 lbs.

• Poly mounting pad: 11-1/2" x 12" x 2"

Mfr. No. 71099:01

ORDER NO. 459-71099

For more information see www.garelick.com

STINGRAY™ STARFIRE HYDROFOIL

The StarFire is the World’s First No-Drill hydrofoil that gives boaters the option to install it by drilling through the cavitation plate. Although we recommend the No-drill installation, if you choose to drill your engine, you will only drill 2 holes instead of the conventional 4 holes required by most competitors!

StarFire utilizes ribbed-neck pins rather than clunky nuts and bolts used by others.

• No-Drill™ Installation

• Best Fuel Savings

• Best Top-End Speed

• Simplest, Quickest Installation

• The super-sleek profile of the StarFire’s wings combined with the streamlined

No-Drill attachment create a hydrofoil that is ultra-thin, easy to install, and an incredible performance improvement

• Has a narrower and thinner swept back Delta-wing profile and has a unique, inverted trailing edge design to relieve drag

• Requires only 2 set screws for No-Drill installation

• High quality inlay graphics designed to resemble polished stainless steel won’t scratch, tear, peel, or fade in the sun

ORDER NO.


913-50001 STARFIRE-1 StarFire Stabilizer, Black

913-50002 STARFIRE-2 StarFire Stabilizer, White

913-50003 STARFIRE-3 StarFire Stabilizer, Gray

For more information see www.stingrayhrdofoils.com

STORAGE LOCKING SYSTEM

Boat Storage Locking System with Alarm Padlock

Loc-R-Bar Alarm System, a full package of protection for your valuable fishing gear.

Loc-R-Bar Alarm System is the best way to protect all of your equipment;

Adjustable stainless steel security bars, solid aluminum mounting brackets and the innovative Loc – Alarm completes the system. When properly installed, Loc-R-Bar

Alarm System secures all deck lockers by extending across the entire deck surface, gunwale to gunwale. Even if thieves break out your hatch locks, they will not be able to open the lockers to get to your equipment.

Loc-R-Bar Alarm System is a fully self-contained alarm system for your boat. No wiring, sensors or complicated installation required. A full package of protection for less than the cost of a quality rod and reel.

Full Storage Locking System includes an alarm padlock and mounting brackets. Great for securing compartments and rod lockers on Bass Boats, Bay Boats, Walleye Boats and selected aluminum boats. An optional compartment adapter is available for securing additional storage units with the same bar (Mfr. No. LB-ADAPTER/1A).

ORDER NO.


205-98000 LB-LRBS113S Loc R Bar™ Complete Alarm System

205-98000-1 LB-LCK110DBA Loc R Bar™ Alarm Lock only

For more information see www.thmarine.com

30

COOLER CADDY

Your refreshments will be bobbing with you in the pool, lake or river

• Speed safety valve for quick inflating & deflating

• Fits up to 48 quart (45 litre) coolers (28" x 17" opening)

• 4 cup holders

• 2 molded tether points

• Self bailing drains

• 47" x 38" (deflated)

ORDER NO. 736-38244

Mfr. No. 40-1020

SPILLWAY PONTOON SLIDE

• Constructed of heavy-duty UV treated 1,000 denier polyester reinforced PVC

• Inflate & attach to your pontoon in 5 minutes or less

• Raised inflatable safety chambers on both sides keep sliders centered

• 8 foot long sliding surface

• 4 inset molded steps & 2 molded handles

• Seams are hot air overlap welded to increase durability

• 1 person capacity

• 10.5' x 33" x 54" (inflated)

ORDER NO. 736-38213

Mfr. No. 58-1350

WATERSPORTS & PWC

4K BOOSTER BALL

Custom Tow Rope with an inflatable buoy in the middle with tow rope connected to both ends

• 840 denier full nylon cover with zipper

• Heavy-guage PVC bladder

• Tough 2" webbing

• Keeps the tow rope out of the water while towing

• Reduces drag and submarining while towing

• Lowers stress on the tube and cover & prevents rope spray

• Acts as a barrier for snap backs, absorbs shock

• Increases visibility on the tow rope

• Enhances fuel economy


• Self bailing drain vent

• 1-4 Rider Towables

• Break Strength: 4,100 lbs.

• Length: 60 ft. (including ball)

• 38" x 27" (ball deflated)

ORDER NO. 736-09428

Mfr. No. 53-2030

BAT-X-RAY

Skill Tubing

• Aerodynamic winged design for slaloming & jumping the wake

• Fuel saver drag-less design

• Features the VEER Tow System & Tiger Tooth Steering Fins, simply lean the direction you want to go

• Constructed of heavy-duty K80 PVC (Special formula pvc)

• Multiple heavy-duty molded PVC handles

• Stainless steel D-ring

• Aluminum quick-connect tow point

• Speed safety valve for quick inflating and deflating

• 1 person capacity


ORDER NO. 736-09350

Mfr. No. 53-1510

MASTER BLASTER

• Tough 30 gauge PVC bladder

• Double-stitched full 840 denier nylon cover

• Air cushioned floor

• 10 comfortable tubular webbing handles with knuckle guards

• Quick-connect tow point for fast hook-ups

• Soft EVA topside panels provide extra comfort


• 3 rider capacity


ORDER NO. 736-38084

Mfr. No. 53-1831

For more information see www.sportsstuff.com


SUPER MABLE

DECK TUBE OR CHARIOT STYLE

• Dual tow points: Front & Back

• Air cushioned stabilizer walls

• Constructed of heavy-duty K80 PVC

• Unique backrest/front riser construction

• Multiple riding positions

• Heavy-duty double stitched full nylon cover with zipper

& self bailing drain vents


• EVA foam seating pads

• Multiple double webbing foam handles with knuckle guards


• 1-3 Rider


ORDER NO. 736-07264

Mfr. No. 53-2223

BIG MABLE













• 1-2 Rider


ORDER NO. 736-07240

Mfr. No. 53-2213

GREAT BIG MABLE


Sit, stand, lay, kneel or even lounge












• 1-4 Rider


ORDER NO. 736-07257

Mfr. No. 53-2218

ROCKIN’ MABLE

Slides effortlessly side-to-side

• Unique convex bottom surface provides rockin’ action

• Dual tow points for 2 different riding experiences


• Wrap around backrest



• Heavy-duty double stitched 840 denier full nylon cover

& 30 gauge vinyl bladder

• Self bailing drain tubes


• Seating pads


• 2 Speed safety valve for quick inflating and deflating

• 2 Rider


ORDER NO. 736-34345

Mfr. No. 53-2262

32



POPARAZZI

Unique High Winged Shape with Rocker Bottom

• High Rise Tower on Rear Deck

• Heavy-duty full nylon cover with zipper

• Heavy-duty K80 PVC bladder



• Self bailing drain vents

• Double webbing foam handles with knuckle guards

• 3 EVA foam body pads for maximum comfort

• Wide wing span construction

• 1-3 Rider


ORDER NO. 736-08179

Mfr. No. 53-1750

SPEED ZONE 2

• Reinforced tow system

• Custom caution stripe safety graphics

• Padded valve cover


• Heavy-duty double-stitched full nylon cover



• Air cushioned floors

• Air cushioned backrests


• 2 Rider


ORDER NO. 736-05413

Mfr. No. 53-1931

SPEED ZONE 3


• Custom caution stripe safety graphics

• Padded valve cover


• Heavy-duty double-stitched full nylon cover



• Air cushioned floors

• Air cushioned backrests


• 1-3 Rider

• 108" (deflated)

ORDER NO. 736-02382

Mfr. No. 53-1940


BANDWAGON 2+2

Sit Forward, Backward, Kneel, Lay or Lounge

• High visibility custom graphics

• Exclusive reduced drag nose design

• Heavy-duty full nylon cover with zipper


• High-back recumbent mesh seating


• Custom sure grip handles

• EVA foam floor pads, foam seat bumpers, and knuckle guards



• 1-4 Rider

• 120" X 73" (deflated)

ORDER NO. 736-08209

Mfr. No. 53-1620

33


FREQUENT FLYER

Deck Tube Design

• Heavy-duty double-stitched full nylon cover with zipper






• Padded valve covers


• Sleek custom graphics on top & bottom

• 1-3 Rider

• 80" (deflated)

ORDER NO. 736-10240

Mfr. No. 53-1661

STUNT FLYER

Deck Tube Design

• Heavy-duty double-stitched full nylon cover with zipper






• Padded valve covers


• Custom Dare-Devil graphics on top & bottom

• 1-2 Rider

• 70" (deflated)

ORDER NO. 736-10233

Mfr. No. 53-1651

CRAZY 8

Unique Figure-Eight Design

• Heavy-duty double-stitched partial nylon cover


• Dual tow points allow sitting in-line or side-by-side



• 2 Rider

• 83" X 54"(deflated)

ORDER NO. 736-02436

Mfr. No. 53-1450

BRAIN WASH COMBO KIT

Kit includes: Tube, Tow Rope, 12 Volt Air Pump & Rope Keeper

• Heavy-duty virgin K80 PVC bladder with electronically welded seams

• Double-stitched partial nylon cover


• Double reinforced internal tow harness

• Self draining floor vent


• 1 rider

• 48" diameter (deflated)

ORDER NO. 736-38237

Mfr. No. 53-6501


34


BIG BERTHA

Giant Classic Towable






• Non-slip foam handles with knuckle guards

• Reflective safety piping

• 1-4 Rider

• Capacity (680 lbs.)

• 74" (deflated)

ORDER NO. 736-08452

Mfr. No. 53-1329

ZIP SKI

• Heavy-duty partial nylon cover


• Double webbing foam handles

• EVA foam knuckle guards



• 1 Rider

• Capacity (170 lbs.)

• 54" (deflated)

ORDER NO. 736-04225

Mfr. No. 53-1313

RASCAL


• Heavy-duty PVC bladder




• Self bailing drain vent

• Tow rope holster

• Custom graphics

• 1 Rider

• 63" (deflated)

ORDER NO. 736-00944

Mfr. No. 53-1320


VIP SPORTSTUBE


• Heavy-duty molded tow system

• Heavy-duty molded PVC handles



• EVA foam knee floor pads. foam seat bumpers,& knuckle guards

• 1 Rider

• 54" (deflated)

ORDER NO. 736-01699

Mfr. No. 53-1116

35


FIESTA ISLAND


• Comfortable mesh seating / bottom surface

• Includes a central air chamber for extra support

• Inflated contoured backrests

• Floating platform

• Molded PVC cup holders

• Molded PVC handles


• Anchoring system to ensure you do not float away

• Grommet system

• Floating 16 quart cooler that can be tethered to the island

• Cooler includes zippered lid, cup holders, rope grommet, and molded PVC handles

• Convenient storage bag included

• 1-8 Person

• 11.5ft x 11.5ft (deflated)

ORDER NO. 736-04881

Mfr. No. 54-2010

CABANA ISLANDER


• Detachable wind-resistant nylon cabana top


• Center swim porthole

• Boarding platform

• Anchoring system to ensure you do not float away

• Grommet system

• Floating 16 quart cooler that can be tethered to the island

• Cooler includes zippered lid, cup holders, rope grommet, and molded PVC handles

• Convenient storage bag included

• 1-6 Person

• 108" x 82"(deflated)

ORDER NO. 736-04232 Mfr. No. 54-1920A

POOL N’ BEACH 2UP LOUNGE

• Thick, durable 20 gauge K80 construction

• Integrated connectors to link multiple

2UP lounges together and have a floating party!

• Comfortable mesh seating

• Air cushioned back & headrests


• Dual molded cup holders

• Rope holder for thethering in lakes or to shore

• Fashionable striped "creamsicle" design

• 2 Person


ORDER NO. 736-34390

Mfr. No. 54-1982

CANTINA LOUNGE



• Air cushioned backrests offer great support


• 4 molded PVC cup holders

• Centered large recessed area conveniently holds sundries or ice and drinks

• 4 Person


ORDER NO. 736-38091

Mfr. No. 54-2025

SIESTA LOUNGE

• Durable nylon full cover



• Air cushioned back & headrests

• Folding footrest


• Dual molded cup holders

• 2 zippered storage compartments

• 1 Person


ORDER NO. 736-08476

Mfr. No. 54-1602


36


THE BIG DOGS

• Constructed of UV resistant 31oz.

1000 denier polyester mesh reinforced PVC

• Double reinforced seat pads

• All seams are hot air overlap welded to increase durability

• Heavy-duty handles with knuckle guards

• 3 “H style” valves

• Double reinforced tow harness with 2 rings & swivel constructed of 316 stainless steel

• Includes a carry bag & foot pump

ORDER NO.

737-38190

737-38206

Mfr. No.

Riders

AHBD-5 5

AHBD-6 6

Dimensions

17'Long x 5'Wide (deflated)

Max. Capacity

1,000 lbs.

19' 3"Long x 5'Wide (deflated) 1,200 lbs.

SWITCHBACK

Two Riders Sit in Front & Two Riders Kneel Behind, Riding Chariot Style

• Rugged double-stitched nylon cover

• 2 Heavy gauge PVC bladders

• 2 Speed safety valves for quick inflating & deflating

• Plenty of boarding straps

• Heavy-duty handles with knuckle guards

• 1-4 Rider


ORDER NO. 737-38053

Mfr. No. AHSB-4

TRANSFORMER 4

4 Tubes in One!

SIT-IN OPEN TOP TOWABLE

• 88" diameter

• Inflatable seat for 4

• 8 heavy-duty tubular webbing handles with knuckle guards


• Kwik-Connect tow attachment

DECK TUBE

• 58" or 88" diameter

• 4 deluxe nylon-wrapped handles with neoprene knuckle guards


ORDER NO. 737-38107

Mfr. No. AHTF-4

NEW LOOK

SIT IN OPEN TOP

Multiple seating arrangements for up to 4 riders

88" DECK

Large Deck Style towable for up to 3 riders.

58" DECK

Small Deck Style towable for 1-2 riders.

G-FORCE®

• D-shape deck tube

• 2 Inflatable stabilizer fins keep riders on board

• Double-stitched full 840-denier nylon cover

• 30-gauge virgin PVC bladder with RF welded seams

• 6 Deluxe nylon-wrapped handles with neoprene knuckle guards

• Kwik-connect for easy & secure hook-ups


• 1-3 Riders


ORDER NO. 737-17179 Replaces 737-17218

Mfr. No. AHGF-3

For more information see www.airhead.com

37


NEW LOOK

TURBO BLAST®

• Double open top tube

• Rugged double-stitched

840 denier partial nylon cover

• 30 gauge virgin PVC bladder

• Kwik-Connect tow point for fast hook-ups

• 2 Self-draining floor vents

• 4 Deluxe handles with neoprene knuckle guards

• Boston valve for convenient inflating and deflating

• 2 Rider


ORDER NO. 737-37223

Replaces 737-18055

Mfr. No. AHTB-12

NEW LOOK

BLAST®

• Double-stitched partial nylon cover

• Heavy-duty virgin PVC bladder with electronically welded seams

• Reinforced internal tow harness

• Self-draining floor vents

• 4 Deluxe handles with neoprene knuckle guards

• Boston valve for convenient inflating and deflating

• 1 Rider

• 54" (deflated)

ORDER NO. 737-37186

Replaces 737-18017

Mfr. No. AHBL-12

BANZAI

WAKESURFER

Perfect for beginners, Intermediates,

Smaller Wakes & Bigger People

• Its classic shape is easy to get up on and forgiving

• Compression molded fiberglass board

• Dual hook grooves grab the wake

• EVA pad with molded kicktail provides plenty of grip, control & balance

• 3 Profiled fins are mounted to recessed fin boxes

• Pin shaped 2.5" rocker makes the board fast

• Length: 63" Center Width: 20.5"

ORDER NO. 737-38114

Mfr. No. AHWS-F01

SS STANDUP PADDLEBOARD

• Super Stable

• Great for fishing, yoga & more

• Experts appreciate the stiffness, lower standing area, tapered rails & aggressive nose for punching through waves

• 3 fins with removable center fin, ensure straight tracking

• Mesh backpack

• Includes high pressure hand pump, pressure gauge, valve wrench & repair kit

• SUP paddle (AHSUP-P1) Order No. 737-34628 sold separately

• 10'8" x 38" x 6" (inflated)

ORDER NO. 737-38220 Mfr. No. AHSUP-2

WAKESURF ROPE

• 16 ft. PolyE wakesurf rope has a 3 section mainline,

12" grasp knot, & an extra large spiral rope braid

• Blue/Black - Matches Banzai Wakesurfer

• Breaking Strength: 1200 lb.

ORDER NO. 737-38282

Mfr. No. AHWS-R01


38


AHP-120AP

AHP-12AP

INFLATABLE ACCESSORIES

AIR PIG PUMPS

• High volume, high pressure capabilities

• Quiet motor

• Includes 10 ft. power cord, 24" reinforced hose, 4 adapters

ORDER NO.

Mfr. No.

Volts psi Amp Draw / Watts

737-38299 AHP-120AP 120v 1.2

3.5amps / 470W

737-38305

10 ft. power cord with AC plug

AHP-12AP 12v 2.2

10 ft. power cord with alligator clips

22amps / 260W

AIR PRESSURE GAUGE

Ensure that your inflatables are inflated to the proper pressure

• Monitors air pressure from 0-10 psi with precision

• Protect your investment by not overinflating

ORDER NO. 737-38183

Mfr. No. AHPG-1

WATER TOYS / ACCESSORIES

AQUA ZOOKA®

DOUBLE SHOT™

• Easy to operate, over/under double barrel quick filling

• Constructed of high-impact thermoplastics

• Range of up to 60 feet

• Equipped with comfortable EVA handle

• Floats

• 18" long

ORDER NO. 737-38138 Mfr. No. AZ-18DS


AIRHEAD®

WAKEBOARD/KNEEBOARD DISPLAY

• Attractively displays a wakeboard, wakeboard combo, wakeskate or kneeboard

• Simple & stable, reversible

• Takes seconds to set up

ORDER NO. 737-25398 Mfr. No. WBD-1

39


MIRRORS

DELUXE REARVIEW SKI MIRROR

VISION 180˚ MIRROR HEAD

• Large 18-5/8"H x 2-1/2W x 5-5/8"L

• Black convex mirror provides 180˚ range of port to starboard rearview vision

• Cup mount with tightening knob works perfectly with deluxe windshield mirror

#02310 (CC Order No. 982-02310 - sold separately)

ORDER NO. 982-01600

Mfr. No. 01600

Back view

Back view

WAVE

MIRROR REPLACEMENT HEAD

• Large 4-1/2"H x 7-3/4W x 17-1/4"L

• New styling that provides for a better look and better performance

• Increased overall viewing size for better functionality

• Lightweight design of the mirror head minimizes vibration and bracket wear

• Includes 1 black mirror head with convex safety glass

Note: Mounting bracket not included

ORDER NO. 982-01408

Mfr. No. 01408

PONTOON BOAT MIRROR BRACKET

Attaches directly to boat rail. No drilling required.

• Fully adjustable mirror head for superior rearview visability

• 180˚ rotation with lock pin which provides secure positions for optimal rearview vision with out of the way storage and unobstructed canvas installation

• Bracket design provides 4 custom height adjustments secured with lock pin

• Includes fully adjustable 10-7/8" x 3-5/8" black mirror head

• Sold as single

ORDER NO. 982-01877

Mfr. No. 01877

For more information see www.cipausa.com

40

MOORING & ANCHORING

BOAT FENDERS

DOCKSIDE™ PREMIUM FENDERS

• Heavy-duty roto-molded with UV stabilizers and fungicides for prolonged life and durability

• Integral air valve for inflation

• Available in both twin eye and center hole

Note: Stocked in white only

Mfr. No.

Description ORDER NO.

TWIN EYE

440-79161

440-79201

440-79231

79-161-F White, Ribbed, 4.5" x 16"

79-201-F White, Ribbed, 5.5" x 20"

79-231-F White, Ribbed, 6.5" x 23"

CENTER HOLE

440-71201 71-201-F White, Ribbed, 8" x 20".

MOORING WHIPS

ECONOMY HOWELL™ MOORING WHIPS

The economical way to fasten your boat, these fiberglass WHIPS are exceptionally strong, attractive and will not obstruct your waterfront view.

Each whip mounts into a durable cast aluminum base. DockEdge base is superior to other bases due to its solid cast aluminum design with molded-in cleat, ring and convenient thumb screw for securing the whip into position. It is unaffected by UV and cannot be damaged when securing to the dock due to it’s tough 3/8” thick mounting footprint. Each whip includes a unique tip with a functional roller which allows easier access to your boat. By simply releasing the whip line from the base cleat, the whip lines effortlessly roll through the unique roller tip causing the boat to gently approach the dock for boarding. Each WHIP is constructed to the most rigid specifications and is of the higest quality. Great for PWCs too!

ORDER NO.

Description

440-31000 8’ Whip, (Set of 2) For boats up to 18’, or 2,000lb.

440-31200 12’ Whip (Set of 2) For boats up to 23’, or 4,000lb.

440-14200 Wheel Pulley, Nylon Black Replacement Part

For more information see www.dockedge.com

New

@




41

MOORING & ANCHORING

FENDER BOOTS

• Made from 100% Premium Polyester knit fabric looks great and lasts season after season

• Constructed to fit most fender styles and sizes

Refer to sizing chart to choose the right cover for your fenders

• UV Protected, abrasion and mildew resistant to hold up in the harsh marine environment

• These heavy weight fender covers protect your hull’s finish and help to prolong the life of your fenders

• With proper cleaning your fender covers will last for many seasons

Washable in cold water and mild detergent

• Sold individually

New Longer

Lasting Fabric!

NAVY BLACK FITS FENDER SIZE

ORDER NO. ORDER NO.

Hull Gard®

111-92050-N 111-92050-R 8-1/2" x 27"

Super Gard™

8-1/2" x 26"

111-92060-N 111-92060-R 10-1/2" x 30"

111-92070-N 111-92070-R -

10-1/2" x 30"

-

Big B™

8" x 20"

10" x 26"

12" x 34"

For more information see www.taylormadeproducts.com

DOCK LINES & STARTER ROPES

DOCK LINE KIT– 24 PACK

• 100% nylon

• Ready to use with 12" eye spline

• Easy to handle

• Absorbs shock

• Rot, mildew, and abrasion resistant

Kit includes: – 24 Pack

(16) 3/8" x 15' White Nylon

(8) 3/8" x 15' Black Nylon

ORDER NO.

666-61501

Mfr. No.

NDL0615-D01

Description

Dock Line Kit - 24 Pack

108-00170-1 (Ea) NDL0615-D01-W 3/8" X 15', White, Double Braid

108-00330-1 (Ea) CDL0615-D01-B 3/8" X 15', Black, Double Braid

24 Pack Kit

Colour not shown

Canada Cordage

STARTER ROPES

ORDER NO.

108-00380

108-00390

108-00401

108-00400

Size

# 4

# 5

# 6

# 7

Dia.

1/8"

5/32"

3/16"

7/32”

Length

250'

250'

250'

250’

New

Size

BUNGEE DOCK LINES

Recommended for Docking Boats & PWC’s up to 4,000 lbs.

• Absorbs shock to boats, cleats, docks, pylons & other hardware

• Bungee is hidden inside the rope and acts as a built-in snubber.

• Two foam floats protect the boat from chafing

• Sliding adjustment at both ends for quick docking

• Colour: Black/Blue/Red

• Tensile Strength: 2,150 lb.

ORDER NO.

737-18178

737-18185

737-18192

Mfr. No.

Description Max.

AHDL-4 4 ft. - Stretches to 5-1/2 ft.

AHDL-5 5 ft. - Stretches to 7 ft.

AHDL-6 6 ft. - Stretches to 9 ft.

42

For more information see www.bridgelineropes.com


BOAT CARE & MAINTENANCE

SPIDER SPOT &

BIRD DROPPING REMOVER

For Decks, Boat Tops and Non-Porous Surfaces

• Dissolves messy spider & bird droppings •

Safe for use around children & pets

• Contains no bleach

• Natural formulation

• Will not remove waxes & polishes

• Non-toxic

ORDER NO.

Mfr. No. Size

706-02901 290 935 ml

CLEANERS / MAINTENANCE

AD OFF

GRAPHIC LABEL/DECAL

REMOVER

Adhesive Remover

• Water or solvent clean-up

• No petroleum solvents

• Biodegradable

• Reuseable spray bottle included

ORDER NO.

Mfr. No. Size

706-06101 610 535 ml

URETHANE CAULKING

REMOVER

Breaks down the bond for all types of caulk & adhesives including cured polyurethane.

• Breaks the bond, but does not break down the adhesive material itself

• Can simply be peeled away without damaging the surface

• Will not harm gelcoat, clear coat, plexiglas, awlgrip®, imron®

ORDER NO.

Mfr. No. Size

706-06181 618 200 gr (8 oz.)

MARINE STRIP-IT

Paint Stripper for all Epoxies,

Enamels, & Urethanes

• Safe for fiberglass surfaces

ORDER NO.

Mfr. No. Size

706-05901 590 1 L

706-05921 592 4 L

XTRA FAST HULL CLEANER

Extra strong - Not for consumer use

• Especially rapid removal of mineral deposits, waterlines, algae, mussels, silt and barnacles.

• Applied by brush, roller or sprayer.

• For use by professionals only.

(Not for resale to consumers) New

Size

ORDER NO.

Mfr. No. Size

706-03831 383 980 ml.

706-03841 384 4 L

706-03850 385 20 L

ACETONE

100% Pure

• Ideal for removing fiberglass, cleaning brushes, spray equipment & tools

• A strong, fast drying solvent for specified coatings, including epoxy resins, polyester ink, adhesives & contact cement

• VOC exempt solvent

New

Size

ORDER NO.

Mfr. No. Size

706-03501 350 1 L

706-03511 351 4 L

706-03521 352 20 L

STRIP-IT GREEN

Paint Stripper for all Epoxies,

Enamels, & Urethanes

• Thick gel that clings to vertical surfaces

• Strips multiple layers of paint at a time

• Paint wrinkles, when job is done

• Odourless & won’t burn your skin

• Biodegradable, water-based, safe for user

ORDER NO.

Mfr. No. Size

706-05911 591 1 L

CAN-AD™ CONCENTRATED

HOLDING TANK TREATMENT

- Septic Safe

100% Biodegradable

• Eliminates odours

• Breaks down waste

• Cleans tanks & sensors

• Does not stain

ORDER NO.

Mfr. No. Size

706-03651 365 1 L

New

Size

706-03661 366 120 ml (6 oz.)

AIR DRY GRANULAR

Refill for all granular moisture traps

• Removes excess moisture from the air

• Great for RV’s, boats, trailers, & home

• Size: 4 litre

ORDER NO. 706-02941

Mfr. No. 294

For more information see www.captphab.com

43


CLEANERS / ACCESSORIES

FLAT/MATTE BLACK PAINT CLEANER

• Safe for use on flat & matte paint finishes and vinyl wraps - cars, trucks, motorcycles, tubs, sinks, faucets, toolboxes & more

• Removes fingerprints, bird droppings, bugs, wax residue soap scum, water stains, oils, lotions & more

• Will NOT leave a shine

• Does NOT contain wax or fillers

• Size: 473 ml / 16 oz. Spray Bottle

ORDER NO. 558-11506

Mfr. No. FM 11506

STAINLESS STEEL & CHROME

CLEANER WITH DEGREASER

• Instantly & easily removes fingerprints, oil, grease, water spots, brake dust, soil wax, soap, automotive fluids & more

• Safe on brushed or polished stainless steel, chrome, painted surfaces, plastics, acrylics jewelry, and watches


ORDER NO. 558-01506

Mfr. No. SP 01506

STAINLESS STEEL & CHROME

POLISH

• Premium, water-based polish

• Leaves a brilliant, protective gloss

• Dust & fingerprint resistant

• Safe on brushed or polished stainless steel: appliances, gas grills, vent hoods & more.

Chrome, painted surfaces, plastics & acrylics


ORDER NO. 558-01306

Mfr. No. SS 01306

MARINE INSTANT

CALCIUM/RUST & LIME REMOVER

• Instantly remove the harsh corrosion caused by

Magnesium Chloride & Calcium Chloride, brake dust, calcium, lime, grease, oil & water stains from aluminum and stainless steel

• Safe on painted surfaces, fiberglass and chrome

• Won’t haze aluminum


ORDER NO. 558-21706

Mfr. No. MR 21706

BUFF BALLS

• Fits any 3/8” drill or air tool

• No exposed hardware to scratch surfaces

• Use on all surfaces - quickly and safely buffs out brake dust, scuff marks, light scratches, oxidation, chalking, tarnish, pitting & corrosion

• Polishing fingers conform to concave, convex & odd shaped surfaces

• Self-cooling - won’t scorch or burn

• Won’t tear like foam buffers when hitting sharp edges

• Washable when used exclusively with Flitz polishing products

• Clamshell packaging

MARINE FABRIC UV - SPF50

• Use on rubber, plastics, marine canvas, upholstery, vinyl, clear vinyl, finished leather, acrylics, polyester, sail cloth, inflatable boats and nylon

• Protects against sun rays, UV, acid rain, dirt, dust, grease, stains from lotions, oils and hard water

• Safe on painted surfaces, fiberglass, plastic windows, eisenglass

• For best results clean surfaces w/ FZ Fabric

Cleaner or soap & water. Apply 2 light coats with drying time between. Recommended by fabric manufacturers for prolonged life


ORDER NO. 558-30406

Mfr. No. MAF 30406

LARGE, ORANGE 5"

• A great all-around size

ORDER NO. 558-00101

Mfr. No. PB 101

44

X-LARGE, BLUE 7"

• Perfect for large, flat surfaces

ORDER NO. 558-00201

Mfr. No. WB 201

For more information see www.flitz. com


CLEANERS / ACCESSORIES

CYCLE 2GO CARE KIT

• Removes water spots, road dirt, oils/grease on chrome, painted wheels as well as any of the high-polished parts

• Removes bug spots on painted or plastic parts & leaves a protective coating for a quick

“show & shine” finish.

• Removes burned on rubber & nylon from boots

& rain gear on pipes, bluing on pipes, fine scratches, oxidation, fingerprints & more!

Kit includes:

Paste Metal Polish 1.76oz

Stainless Cleaner 1.7oz

Speed Waxx 1.7oz

Microfiber Cloth & Carry-Along Pouch

ORDER NO. 558-41503

Mfr. No. CY 41503

BBQ GRILL CARE KIT

• Instantly & easily remove fingerprints, oil, grease, water spots, dirt, corrosion & more.

• Safe on brushed or polished stainless steel:

Appliances, gas grills, vent hoods

• A premium, water-based polish leaves a brilliant, protective gloss that’s dust & fingerprint resistant

• Safe on brushed or polished stainless steel:

Appliances, gas grills, vent hoods

Kit includes:

Liquid metal polish 3.4oz

Stainless Cleaner 1.7oz

Stainless Polish 1.7oz

Microfiber Cloth

ORDER NO. 558-41504

Mfr. No. BBQ 41504

MARINE DETAILERS KIT/BUCKET

• Removes oxidation, haziness, scuff marks, water spots & more from virtually all metal brightwork, fiberglass, plexiglas, eisenglass & more

• Removes corrosion, lime scales, hard water buildup

& more from aluminum & fiberglass.

• Quick gloss detail spray

Kit includes:

5" & 7" Buff Ball

Polish/Paste 5.29oz tube

Calcium, Rust, & Lime Remover

16oz Sprayer

Marine Speed Waxx 16oz Sprayer

Marine “How-to” DVD

Convenient Bucket with handle

ORDER NO. 558-21503

Mfr. No. MAR 21503

For more information see www.flitz.com

PLASTIC WINDOW & FIBERGLASS

RESTORATION KIT

• One kit does it all GUARANTEED!

Eisenglass, fiberglass, gelcoat, plexiglas & plastics

• Restores clarity to windshields, hatch covers & sails

Kit includes:

7" Buff Ball

Polish/Paste 1.76oz tube

Marine Speed Waxx 1.7oz

ORDER NO. 558-31503

Mfr. No. PL 31503

45


CLEANERS

MARINE RE-FRESH

• Absolute ODOUR control & Secure Clean all surfaces

• Even SKUNK odours!!!

• Helps prevent MILDEW stains

• De-odourize any hard or soft surfaces

• Cabin, head, shower

• Rugs, interior, sail locker, pets

• Perfect for launch or haul-out

• Waterbased

• 900 ml / Spray Bottle

ORDER NO. 791-55020

Mfr. No. 5502

NANO/FOUL RELEASE

Advanced Molecular Level Technology!

• For use on fiberglass, aluminum, painted surfaces, inflatables, dingys

• Simple D.I.Y. Application

• Invisible protective surface

• Fresh or salt water

• Up to 3 years Foul Release Protection

• Treats up to 120 sq. ft.

• Easily maintained

• Size: 250 ml

ORDER NO. 791-54350

Mfr. No. 5435

BOAT/YACHT CLENZ

• Cleans & revitalizes any marine surface including decks, hulls, non-skid, fenders, chrome

• Removes black streaks & mildew stains

• Great for fiberglass, aluminum, inflatables & pontoons

• Non-scratch formula

• Hose or rinse off with damp cloth

• Use white abrasive brush on stubborn stains

• Size: 450 ml Eco-Rated

ORDER NO. 791-60981

Mfr. No. 6098

Replaces 791-60971 (Boat Yacht Scrub)

NANO/ULTRA POLISH

Advanced Molecular Technology!

• For use on fiberglass, aluminum, painted surfaces, plastic, isinglass, chrome

• Invisible protective surface

• Repels water and dirt

• Fresh or salt water

• Helps renew surfaces

• Treats up to 120 sq. ft.

• Size: 250 ml

ORDER NO. 791-55350

Mfr. No. 5535

ULTRA SAIL CLEAN

Whistle clean and De-Odorize all sails

• Cleans, removes stains, revitalizes look

• Extends life of sails,spinnaker, biminis & canvas

• Simple D.I.Y. action

• Waterbased

• Size: 450 ml / Spray Bottle

Eco-Rated

ORDER NO. 791-55040

Mfr. No. 5504

MAST & BOOM

CLEANER & BRIGHTENER

• Easy brush on & hose off

• Anodized aluminum & painted masts

• Cleaner sails

• Reduced racing weight

• Size: 900 ml

ORDER NO. 791-66050

Mfr. No. 6605

For more information see www.alexmilne.com

ULTRA SAIL SPOTTER

Eliminates Tough Spots

• Cleans sails, biminis, line, carpets and other fabric

• Removes leaf, mildew, grease, oil, blood stains, spider droppings, & black streaks

• D.I.Y. anytime & rinse

• Size: 450 ml

ORDER NO. 791-50580

Mfr. No. 5058

For more information see www.alexmilne.com

PERMATEX®

ULTRA CHERRY®

PUMICE HAND SCRUB

A professional strength hand cleaner concentrated to tackle the toughest grease, while conditioning hands. This premium fine pumice lotion acts quickly to power out the harshest soils without leaving hands feeling greasy or irritated. Great for hard working hands, it contains a unique skin conditioning system that helps to restore moisture and prevent dry, chapped hands. Its light clean cherry scent is refreshing and contains no petroleum odors. No Kerosene, no Phosphates.

Suggested Applications: Removes grease, grime, tar, adhesives, asphalt, carbon, epoxies, tile cement, oil, paint, odors, ink, and much more!

ORDER NO. 814-21222

Mfr. No. 21222 Size: 3 litre

For more information see: www.permatex.com

46

TROLLING MOTORS & FISHING SUPPLIES

ORDER NO.

BOW MOUNT TROLLING MOTORS MOTOR SELECTION CHART

MODEL MOUNT CONTROL

MAX

THRUST

VOLTS

SPEEDS

(FWD/REV)

SHAFT

LENGTH

PROP

COMPOSITE

SHAFT

UNIV.

SONAR 2 i-PILOT

LINK i-PILOT

AUTOPILOT

DIGITAL

MAXIMIZER

BATTERY

METER

MAX BOAT

LENGTH

*

TERROVA BOW-MOUNT MOTORS

Compatible

713-58861

TERROVA 80

Terrova

Electric

Steer

80 24 Variable 60"

Weedless

Wedge 2

Yes _

Compatible

Compatible

713-66161

TERROVA 80/AP/US2

Terrova

Electric

Steer

80 24 Variable 60"

Weedless

Wedge 2

Yes Yes

Compatible

713-58853

713-58865

713-58855

713-58867

713-58840

713-58704

713-58711

713-58751

713-66201

713-66251

713-58756

713-58741

713-58753

713-58758

TERROVA 55/IP/US2

+


+

Terrova

Terrova

713-58873

Limited Qty


+

713-58842

Terrova


+

Terrova

New

TERROVA with i-PILOT

55/IP LINK /US2

+

Terrova


80/IP LINK /US2

+

Terrova


112/IP LINK /US2

+

Terrova

New

POWERDRIVE

45PD V2

POWERDRIVE

55PD V2

POWERDRIVE

55PD V2/US2

POWERDRIVE

55PD V2/AP

POWERDRIVE

55PD V2/AP/US2

POWERDRIVE 70PD

V2/US2

POWERDRIVE

55PD V2/IP

POWERDRIVE

55PD V2/IP/US2

POWERDRIVE 70PD

V2/IP/US2

TERROVA with i-PILOT BOW-MOUNT MOTORS

Compatible i-Pilot 55 12 Variable 54"

Weedless

Wedge 2

Yes Yes

Yes


Weedless

Wedge 2

Yes Yes

Yes


Weedless

Wedge 2

Yes Yes

Yes

Yes i-Pilot 112 36 Variable 60"

Weedless

Wedge 2

Yes Yes

Compatible

TERROVA with i-PILOT Link BOW-MOUNT MOTORS

Yes i-Pliot Link 55 12 Variable 54"

Weedless

Wedge 2

Yes Yes

Compatible


Weedless

Wedge 2

Yes Yes

Compatible


Weedless

Wedge 2

Yes Yes

Compatible

POWERDRIVE V2 BOW-MOUNT MOTORS

Compatible

PowerDrive

Electric

Steer

45 12 Variable 48" Power Prop Yes _

Compatible

Compatible

PowerDrive

Electric

Steer

55 12 Variable 54"

Weedless

Wedge 2

Yes _

Compatible

Compatible

PowerDrive

Electric

Steer

55 12 Variable 54"

Weedless

Wedge 2

Yes Yes

Compatible

Compatible

PowerDrive

Electric

Steer

55 12 Variable 54"

Weedless

Wedge 2

Yes _

Compatible

Compatible

PowerDrive

Compatible

Compatible

PowerDrive

Compatible

PowerDrive

POWERDRIVE V2 with i-PILOT BOW-MOUNT MOTORS


Weedless

Wedge 2

Yes _

Yes

Compatible

PowerDrive

Electric

Steer i-Pilot

70

55

24

12

Variable

Variable

60"

54"

Weedless

Wedge 2

Weedless

Wedge 2

Yes

Yes

Yes

Yes

Yes

Compatible

PowerDrive

Electric

Steer i-Pilot

55

70

12

24

Variable

Variable

54"

60"

Weedless

Wedge 2

Weedless

Wedge 2

Yes

Yes

Yes

Yes

Yes

713-68670

FORTREX 80/US2

FORTEX BOW-MOUNT MOTORS

Lift-Assist/

Bowguard

360˚

Cable Steer 80 24 Variable 45"

EDGE BOW-MOUNT MOTORS

Weedless

Wedge 2

Yes Yes _

_

Yes

Yes *

Yes *

Yes *

Yes *

Yes *

Yes *

Yes *

_

_

_

Yes

Yes

_

Yes *

Yes *

Yes *

_

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

_

25’

25’

21’

25’

25’

25’

21’

25’

25’

18’

21’

21’

21’

21’

23’

21’

21’

23’

25’

713-55948

EDGE 45 Compact

Latch & Door

Cable Steer 45 12 5 50" Power Prop Yes _ _ _ _ _ 18’

713-55957

EDGE 55 Compact

Latch & Door

Cable Steer 55 12 5 52"

Weedless

Wedge 2

Yes _ _ _ _ _

* General guideslines only. See your dealer for specific information on which motor best suits your boat style & intended use.

* Advanced AutoPilot included on i-Pilot.

+ Includes foot pedal. IP Link= i=Pilot Link CP= Co-Pilot AP=Autopilot H=Hand Control SC= Speed Coil US2=Universal Sonar 2

For more information see www.minnkotamotors.com

47

21’

TROLLING MOTORS & FISHING SUPPLIES

•

FISHING ACCESSORIES

PONTOON SQUARE RAIL

ADJUSTABLE ROD HOLDER

Each rod holder comes with 2 protective liners, one to fit 1" and one to fit

1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water. The hidden left or right adjustment allows even more adjustment choices. Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp. Angle around the rail is infinitely adjustable. Angle to the left or right adjusts

15˚ increments.

• Fits 1" or 1-1/4" square rail

• Fully adjustable around the rail and side to side

• 9" tall tube with 1-5/8" ID

Includes everything you need to install, mounting screws and the right hex key needed to make the angle adjustment and to tighten the clamp in place

ORDER NO. 336-55108

Mfr. No. 55108A

For more information see www.cesmith.com

KNIFE & PLIERS HOLDER

C

ORDER NO.

Mfr. No.

A B C FASTENER

423-25925 325925-1 3-7/8" 2-1/4" 8-7/8" # 8 FH

Great for storing your knives, pliers and fishing lures.


DELUXE PONTOON BOAT

TACKLE RACK

• Compact design is big enough to hold spinning & conventional tackle

• Stainless steel fasteners resist rust & corrosion

• Easy assembly

• UV-stabilized high density polyethylene

• Secure & convenient, on-board rod storage

Mfr. No. P03-074W

ORDER NO. No. 305-03074

TACO OUTRIGGER-READY ACCESSORY

GRAND SLAM 880 ANTENNA MOUNT

• Unique design allows for raising and lowering antenna from under the top

• Folding crank handle stores flush into base

• Bolts down to standard TACO Outrigger-Ready mounting plates

• Brushed anodized aluminum body

• Polished 316 stainless steel crank handle

• Fits standard 1" x 14" thread antenna

• Delrin roller bearings provide for smooth operation and durability

• Hand crank; no power required

• Dimensions: 7.5"H, 4.25"W, 3-5/16" Hand Crank

Mfr. No. GS-880

ORDER NO. No. 305-00880

48

Folding

Crank

Handle


DECK HARDWARE & BOAT TOPS

NEPTUNE III ACCESSORIES

NEPTUNE III LEANING POSTS

FEATURES & BENEFITS

• (4) TACO poly tulip rod holders

• Deluxe includes (4) TACO aluminum tulip rod holders

& backrest/grabrail

• Folding foot rest

• Cooler storage and strap

MATERIAL CHARACTERISTICS

• Aluminum frame, spiral sanded, bright dip anodized

• One-piece welded frame construction made from marine-grade aluminum

• Seat cushions constructed with marine-grade vinyl, foam and PVC board substrate

• White upholstery

• Anti-warp and anti-rot

• Mildew, fungus and UV-resistant

L10-2010BSA-1

L10-2005BSA-1

ORDER NO.

Mfr. No.

Description

305-10205 L10-2005BSA-1 Neptune III Leaning Post

305-10201 L10-2010BSA-1 Neptune III Deluxe Leaning Post

73"

60"

NEPTUNE T-TOP with/BLUE CANVAS TOP

"No-Weld" Adjustable T-Top

Boat owners now can have the look, strength and durability of a factory-installed, anodized aluminum T-Top, that can be assembled and installed without welding.

• Easy to install and to remove

• Assembles and installs without costly welding or drilling

• Design & marine tested for strength & durability

• Adjustable to fit most consoles up to 51" wide

• Packs flat for easy shipping & storage

• Footprint Dimensions: 39-1/2"L, 18" TO 51"W (adjustable)

• Easy removal for storage when not in use

Mfr. No. T34-1001BSA-1 Blue Canvas Top

ORDER NO. No. 305-34101


60"

32"

36"

T34-1001BSA-1

ANCHORSHADE®III

Long known for manufacturing quality marine products,

Taylor Made Products has re-invented the highly successful Anchorshade.

Several important design changes are being introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model.

Also added to these improvements, is a powder-coated aluminum frame

(so even if scratched, it will not rust), a 4-point locking height adjuster

Great

NEW

Design!

and a Sur- Lock push-up mechanism. These newest innovations are sure to keep your Anchorshade III looking and working well, for years to come!

This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high performance boats.

AnchorShade®III is designed to be used when anchored or at idle speed on a calm day.

AnchorShade®III is perfect for relaxing on the water, at dockside, or just lounging on the beach.

• Adjustable pole locks in place up to 8'

• Lightweight, mildew/fade resistant UV-treated nylon top

• Excellent sun protection. Blocks out 85-90% of harmful rays

• Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications

• “Market Style” top allows venting to occur without loss of sun protection

• Comes complete with its own heavy-duty carrying case with a shoulder strap

ORDER NO.

Mfr. No.

666-22042 22042

666-22043 22043

Description

Anchorshade III, White

Anchorshade III, Blue

For more information see www.taylormadeproducts.com

49

DECK HARDWARE & BOAT TOPS

ADHESIVE FASTENERS

New adhesive snaps from YKK allow for secure attachment without damaging your installation surface.

No tools are required, no splits to worry about, no extra holes in your boat.

Tested by marine canvas professionals as a high performing metal snap alternative that attaches to a surface with adhesive rather than screws. These adhesive snaps make installation a breeze, even for a novice DIY’er.

Unlike traditional metal screw studs, these adhesive backed fasteners will not deteriorate in the typical marine environment.

Plus the unique dome shape enables the fasteners to be walked on without causing pain.

The adhesive snaps secure to most boat surfaces with a pad of 3M VHB acrylic conformable foam adhesive tape on the underside of the domed plastic stud or socket that allows for the snap to adhere to boat surfaces without having to drill a hole in your boat.

Simply clean the application surface, peel off the protective paper backing, position the snap and firmly hold it in place.

Adhesive snaps can be used wherever a conventional screw stud might be used.

• Marine canvas, carpeting, cushions, and seating

• Decks, bulkheads, panels, or console covers

• Can also be used to replace broken or rusted existing screw-in studs without the need to fill-in the old screw hole

FLEXIBLE BASE ADHESIVE CANVAS FASTENERS

Stainless/POM

ORDER NO.

Mfr. No. Style

422-97123-1 Pair 297123-1 Stud

422-97123-2 25/pcs. 297123-2 Stud

422-97143-1 Pair 297143-1 Stud

Base Colour

Clear

Clear

Clear

422-97143-2 25/pcs. 297143-2 Stud Clear

422-97623-1 Pair 297623-1 Socket Clear

422-97623-2 25/pcs. 297623-2 Socket Clear

A

1"

1"

1-9/16"

1-9/16"

1"

1"

B

5/16"

5/16"

1/4"

1/4"

5/16"

5/16"

Clear when applied - Remove red backing

Socket Stud

Socket

Socket

Stud

DOME BASE ADHESIVE CANVAS FASTENERS

POM

ORDER NO.

Mfr. No. Style

422-97240-1 Pair 297240-1 Stud

422-97240-2 25/pcs. 297240-2 Stud

422-97241-1 Pair 297241-1 Stud

Base Colour

Black

Black

White

422-97241-2 25/pcs. 297241-2 Stud White

422-97440-1 Pair 297440-1 Socket Black

422-97440-2 25/pcs. 297440-2 Socket Black

422-97441-1 Pair 297441-1 Socket White

422-97441-2 25/pcs. 297441-2 Socket White

Tension

N/A

N/A

N/A

N/A

Heavy

Heavy

Heavy

Heavy

A B

1-9/16" 1/4"

1-9/16" 1/4"

1-9/16" 1/4"

1-9/16" 1/4"

1-9/16" 7/32"

1-9/16" 7/32"

1-9/16" 7/32"

1-9/16" 7/32"

CANVAS FASTENERS

21A 21B

Oversized

CANVAS FASTENERS Nickel Plated Brass

ORDER NO.

Mfr. No. Fig. No.

422-99113 Ea set 299113-1 21A

422-99114 Ea set 299114-1 21B

Description

Canvas Snap Stud (#10 Sheet Metal Screw) 5/8" (6/set)

Canvas Snap Stud (#8 Sheet Metal Self Tap Screw) 1/2" (6/set)

CLEATS

HEAVY DUTY CLEAT

Injection Molded Nylon

ORDER NO. Mfr. No. A B C D E Colour Fastener

420-43380 each 043380-1 8-1/16" 1-3/4" 2-1/4" N/A 4-3/16" Black 5/16" FH


50

LADDERS & DOCK HARDWARE

OVER PLATFORM TELESCOPING LADDER

• Steps - fold out and over, telescope down easily

• Compact stowage - steps fold over flat on platform

• Comfortable black contour traction molded steps

• Standard folding gudgeons

• Electropolished 304 stainless steel - rated to 275 lbs.

• Black poly steps

• Nylon bushings between ladder sections prevent inadvertnt deployment when flipping ladder into the water

• 3 Step, L - deployed: 34.5" (88cm), L stowed: 14.5" (37cm), Overall height: 1.25" (3cm),

W: 11.5" (29cm), L of gudgeons: 7" (18cm)

ORDER NO. 459-19656 Mfr. No. 19656:01

• 4 Step, L - deployed: 45.5" (116cm), L stowed: 15.5" (40cm), Overall height: 1.50" (4cm),

W: 12" (30.5cm), L of gudgeons: 6.5" (17cm)

ORDER NO. 459-19657 Mfr. No. 19657:01

459-19656

Stowed

459-19656

PREMIUM FOLDING PONTOON TRANSOM BOARDING LADDER

Folded

• Permanent mount at transom, ideally at stern gate door

• Folds down for easy boarding

• Comfortable black contour traction molded steps extra deep for added step surface (5" x 12")

• Durable 1" (3 cm) diameter anodized aluminum tube

• Includes securing clip, and second step abuts end of pontoon log

• 250 lb. capacity

• 2 - 4 Step, Fold Down: L: 14" + 32" (36cm + 81cm),

OL: 46" (117cm), 16" (41cm)

ORDER NO. 459-12380 Mfr. No. 12380:01

REMOVABLE PONTOON FOLDING BOARDING LADDER

• Folds down to 4 steps; hooks fold and ladder stows in locker underneath furniture

• Securing clip included

• Sturdy design with overrail hooks for easy boarding

• Lightweight anodized aluminum 1" (3cm) diameter resists corrosion

• Attaches easily to deck at side gate for temporary or permanent mounting with black poly deck mounting cups (C.C. Order No. 459-99076)

• Comfortable contour black traction molded steps


• Includes deck mounting cups

• 4 Step, Fold Down: L: 30" + 13" (76cm + 33cm), W: 16" (41cm) Deck Mounting Cups

459-99076

ORDER NO. 459-12350-21 Mfr. No. 12350-21:01

LADDER ACCESSORIES

Deck Mounting Cups

• For use with 12350-21 ladder

• UV resistant durable black poly

• Packaged in pairs

Mfr. No. 99076:01

ORDER NO. 459-99076


Folded

51


DOCK LADDERS

FIXED – WIDE STEP LADDERS

Welded Marine Grade Aluminum

These durable ladders are ideal for sure-footed access to and from the water or boat and with a load capacity of 665 lbs. these rugged ladders will stand the test of time. Perfect for seawalls or dock applications with varying water levels.

Rail Height: 21" above the dock

Distance to first step: 12" from dock surface,

& 12" between steps

Steps: 4" deep and 14" wide

ORDER NO. Mfr. No.

440-02043 2043-F

440-02044 2044-F

440-02045 2045-F

4"

Description

3-Step Complete Dock Ladder



DOCK CLEATS

CLEAVER CLEAT

Knotless Marine Cleat

• Secure and release your marine lines without knots

• Maintenance free

• Withstands harsh marine conditions

• Easily installed in minutes

Note: Bolts not included

ORDER NO. Mfr. No.

440-02715 2715-F

SOLAR DOCK LIGHTING

STARLITE™

SOLAR CAPACITOR SERIES 5 Year Warranty

Welded Marine Grade Aluminum

The Starlite™ Capacitor Series of Solar lighting is for those with distinguishing tastes in design, durability and function. Not only are these unique and advanced solar lights built to provide a long and useful life, they actually seem to put out more light than they take in during the charging process. A capacitor stores the energy created from exposure to the sun, as well as charges the rechargeable battery. On days when there is insufficient sunlight to charge the battery, the capacitor re-energizes the battery with what it has held in safe keeping so you never have to go without light at night just because there wasn’t enough during the day.

ORDER NO. Mfr. No.

Description

440-96306 96-306-F Model 108

ORDER NO. Mfr. No.

Description

440-96307 96-307-F Model 120

ORDER NO. Mfr. No.

Description

440-96308 96-308-F Model 125

SPECIFICATIONS Model 108 Model 120

Auto On-At-Dusk YES YES

Colour Charcoal Grey Charcoal Grey

Dimensions (LxWxH) 4.25" x 3.46" x 0.9" 4.72" x 4.33" x .78"

Materials Aluminum & Polycarbonate Aluminum & Polycarbonate

LED’s 6 4

Lumens (light emitted) 5 5

Solar Panel 2.5v, 95mA 2.5v, 105mA

Battery Ni-MH 700mAh Ni-MH 1000mAh

Capacitor Super Capacitor 2 x 30F Super Capacitor 2 x 30F

Operating Temperature 13 - 167˚F (-25˚C to 75˚C) 13 - 167˚F (-25˚C to 75˚C)

Waterproof to IP67 YES YES

Load Capacity (weight) 30 Tons 30 Tons

Model 125

YES

Charcoal Grey

6

5

4.92" x 3.93" x 0.78"

Aluminum & Polycarbonate

2.5v, 95mA

Ni-MH 1000mAh

Super Capacitor 50F

13 - 167˚F (-25˚C to 75˚C)%

YES

30 Tons


52


SOLAR DOCK LIGHTING

STARLITE™ SIDE MOUNT

SOLAR LIGHT

• 4 brite white LED’s w/life span of 100,000 hours

• Weatherproof, durable & attractive

• Ideal for home, cottage, deck or dock

• Small & compact

• No wiring necessary

ORDER NO. Mfr. No.

440-96272 96-272-F

• Secure to any vertical surface

• Light will automatically become active at dusk

• Convenient On/Off switch

• Li-ion battery - 1.2V 900 mh

DOCKLITE™ SOLAR

DOCK & DECK LIGHT

• Super brite LED’s

• Durable, weatherproof low profile construction

• Attractive design

• Ideal for docks, walkways, decks, patios & landings

2 pack

ORDER NO. Mfr. No.

440-96262 96-262-F


•

•

•

• Up to 8 hours of illumination

Light will automatically become active at dusk

Wireless & easy to install

Extended duty solar charged batteries

ROD HOLDER LIGHT

ROD HOLDER LITE

The rod holder light may be possibly the most convenient and useful solar lighting you could have for your boat.

The tapered design allows it to fit several sizes of rod holders and adjustable angle means you can position it to where it will be the most benefit. Six preinstalled colour LEDs mean that you can change the colour any time and it will illuminate 360˚ around it. Great for night fishing and an added bonus is that it can be used as a torch light when boarding and docking.

Rechargeable, replaceable battery included.

ORDER NO.

440-96285

Mfr. No.

96-285-F

6 PREINSTALLED LED Colours!

Change Colours ANY TIME!

360˚

@




53


DOCK CORNER & SPOT PROTECTION

DOCK GUARD™ DOCK BUMPER KIT

This roto-molded bumper kit is fabricated from soft vinyl with UV inhibitors and fungicides. Each piece has angled ends to deflect craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.

Convenient 3-Piece value pack.

3-3/4"

12" Corner x 1, 18" Straight x 2

440-73106 440-73103

ORDER NO. Mfr. No.

Description

440-73100 73-100-F Dock Bumper Kit (3 pieces)

440-73103 73-103-F 12" Corner Bumper only

440-73106 73-106-F 18" Straight Bumper only

18"

New

12"

OCEANUS BUMPERS 35"

These heavy-duty roto-molded bumpers incorporate all the benefits of a multi-usage product with the strength and integrity you’ve come to

•

• know from DockEdge products. Due to its’ design it will not only protect the lower bow but anywhere you install an Oceanus bumper. Fabricated to be permanently secured in place, it also has grooves which act as reinforcing ribs and can be used for temporary strapping in places where fastening isn’t allowed. Ideal for commercial & marina applications.

Fabricated with UV inhibitors & fungicides

Includes screw-in inflation valve

ORDER NO. Mfr. No.

Description

440-73071 73-071-F Oceanus Bumper, White

DO IT YOURSELF – FLOATING DOCK KITS

DOCK 2 GO MODULAR FLOATING DOCK HARDWARE KIT

• Includes heavy duty hot dipped galvanized mounting hardware required to assemble a

6' x 12' modular floating dock section*

• Detailed construction and hardware placement instructions included

• Each kit may be utilized to construct a stand-alone dock or may be attached to another

Dock 2 Go section using a Dock 2 Go modular connector kit (Mfr. No. 85-205-F) to increase dock length or width as required

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements

Kit includes: (6) Backer Plate (CC Order No. 440-93122), (4) Inside Corner (CC Order No.440-75460),

(16) Joist Corner (CC Order No. 440-99002), (28) Washer Plate (CC Order No. 440-99006),

(2) Chain Retainer (CC Order No. 440-99013)

ORDER NO. Mfr. No.

Description

440-85272 85-272-F Dock 2 Go Dock Hardware Kit

DOCK 2 GO PLUS MODULAR FLOATING DOCK HARDWARE KIT

The Dock-2-Go PLUS Kit comes complete with all hardware**and floatation you need to construct a modular floating dock.

Kit includes: All necessary hardware & FOUR of the popular and versatile Howell™ 550 floats

(CC Order No.440-99246)

**

Fasteners, lumber, and anchorage sold separately to allow for consumer preferences or requirements

***

SPECIAL ORDER ONLY ORDER NO. Mfr. No.

Description

440-85300 85-300-F Dock 2 Go PLUS Dock Hardware Kit

*** SPECIAL ORDER ONLY


54

SEATING & TABLES

DELUXE PONTOON FURNITURE

I

C

G

C

H

D

F

A E

A

Note: Pedestal sold separately

Mfr. No. 8WP21-18S

ORDER NO. 870-82118

Features:

• State of the Art, High Impact Plastic Frames

• Molded Plastic Base

• Scuff and Mar Resistant

• Compression Foam Padding

• Storage Compartments

• Heavy-Duty 28 oz. Marine Grade Vinyl

• Mildew Resistant & UV Treated

• 6 Year Warranty on Frame

• 3 Year Warranty on Upholstery

B

ORDER NO.

Mfr. No.

870-135241011 WD13524-1011

SPECIAL ORDER ONLY

Complete Deluxe Pontoon Furniture Group

11 Piece, Colour: Grey / Navy / Blue

DIMENSIONS: 90-3/8" Length Across Back, 71-3/8" / 63" Length Across Side

Fig.

ORDER NO.

A

870-1311011

B

870-1321011

C

870-0951011

D

870-1331011

E

870-13051011-R

F

G

H

I

870-13051011-L

870-1201011

870-1151011

870-1050221

New

New

New

New

Mfr. No.

WD131-1011

WD132-1011

WD95-1011

Qty Description

2 46" Long Corner Lounge & Base – Left, 29"H x 46"W x 23"D

1 46" Long Corner Lounge & Base – Right, 29"H x 46"W x 23"D

2 28" Bench and Base, 29.25"H x 28"W x 24"D

WD133-1011

WD1305R-1011

1 Radius Corner Section & Base, 29.25"H x 25.375"W x 32.75"D, 23" Seat Depth

1

Lean Back Recliner – Right Radius with 2 Cup Holders

29.25"H x 17"W x 23.75"D, 28.25" (Height without Cushion)

WD1305L-1011 1

Lean Back Recliner – Left Radius with 2 Cup Holders


WD120LS-1011 1 Bucket Seat, 23"H x 24.25"W x 22.25"D, 16.5" Seat Depth

WD115-1011

WD105-221

1 Steering Console with 2 Cup Holders, 29.25"H x 26"W x 18"D

1 Square Arm Rest, 22.5"H x 9"W x 22.75"D

For more information see www.wiseseats.com

55


DELUXE PONTOON FURNITURE

1

5

6 7

2

8

3

4

Fig.

ORDER NO.

1

870-1311011

2

870-1321011

3

870-13051011-R

4

870-13051011-L

5

870-4341011

6

870-110221

7

870-112221

8

870-82118

9

870-00015

Mfr. No.

WD131-1011

Description

46" Long Corner Lounge & Base – Left, 29"H x 46"W x 23"D

WD132-1011

WD1305R-1011

WD1305L-1011

46" Long Corner Lounge & Base – Right, 29"H x 46"W x 23"D

Lean Back Recliner – Right Radius with 2 Cup Holders


Lean Back Recliner – Left Radius with 2 Cup Holders


WD434LS-1011 High Back Boat Seat – 23.25"H x 17"W x 20.5"D – Seat Depth: 14.5"

WD110-221 Arm Rest – Left Radius, 22.5"H x 9"W x 22.75"D

WD112-221

8WP21-18S

WD15

Arm Rest – Right Radius, 22.5"H x 9"W x 22.75"D

Adjustable Pedestal – Seat Mount Spider, Adjusts from 12" to 18"

12 Way Position Locking, Swivels 360˚

AD

9

For more information see www.wiseseats.com

56


SEATING

CLASSIC NAVY DECK CHAIR

• Lightweight, sturdy and very comfortable

• 1" diameter, corrosive resistant folding anodized aluminum tube frame

• One piece canvas back with 24" high back frame

• Double leg and front cross bar frame for stability, easy to stow

• Beautifully sewn olefin woven fabric

• Varnished hardwood arms

• Seat Height: 16" (41cm)

• Premium double leg chair tips - white poly

Replacement tips for 1" dia. deck chair legs:

C.C. Order No. 459-76012 (Pkg. 2)

Mfr. No. 35035-62:01

ORDER NO. 453-503562


TAPER-LOCK™ SERIES

CLASSIFICATIONS

B

2-PIECE PEDESTAL SET

HI-LO NON-LOCKING 2-PIECE PACKAGE

This 2-position, 2-part system allows upright seating while fishing, or compact storage and increased driver visibility while the boat is underway.

2-Piece Hi-Lo Set Includes:

• Taper-Lock™ Hi-Lo Polished Post, 2-3/8" (Order No. 160-04060)

• Taper-Lock™ Hi-Low Swivel (Order No. 160-02050)

• 16" from deck to top of swivel

• Use with any Taper-Lock™ base (Sold Separately)

Replaces 160-04270

ORDER NO.

Mfr. No.

160-04200 1600420

POWER-RISE STAND-UP PEDESTAL

Post with Seat Mount

• Adjusts from 22-1/2" to 29-1/2". Rotates 360˚

• 2-3/8" post

• Brite Dip finish


Replaces 160-20240

ORDER NO.

Mfr. No.

160-20160 1602016

POWER-RISE SIT DOWN PEDESTAL

Post with Seat Mount

• Adjusts from 13" to 19-1/8". Rotates 360˚

• 2-3/8" post

• Brite Dip finish

• Cam prevents free spinning while trailering

(on locking pedestals)


Replaces 160-20110

ORDER NO.

Mfr. No.

160-20020 1602002

For more information see www.springfieldgrp.com

57


REMOVABLE PEDESTAL SYSTEMS

CLASSIFICATIONS

B

KINGPIN™ SERIES

HI-LO 3-PIECE PACKAGE

This is unique 2-position, 3-part system allows full upright seating while fishing.

3-Piece Hi-Lo Set Includes:

• 11" standard KingPin™ post, satin finish (CC #161-04110)

• Hi-Lo swivel with spring, e-coat finish (CC #161-52010)

• 7" x 7" standard KingPin™ base, satin finish (CC #162-00010)

Note: Swivel adds 2-1/2" to height of post

ORDER NO.161-54310

Mfr. No. 1615431

Note: Replaces 161-54310

PLUG-IN™ SERIES

2-3/8" 3-PIECE PEDESTAL SETS

This is a unique 2-position, 3-part system that allows full upright seating while fishing or remove the pedestal and insert the seat mount into the base for compact storage.

3-Piece set includes the following:

• Plug-In™ Hi-Lo swivel seat mount (Mfr. No. 1312700)

• Plug-In™ Hi-Lo fixed height post, anodized (see sizes below)

• Plug-In™ 9" diameter base, satin (CC # 130-07510)

ORDER NO.

Mfr. No. Post Length

130-07090-1 1300709-HL1 9"

Replaces 1300709-HL

130-07120-1 1300712-HL1 12"

Replaces 1300712-HL

130-07150-1 1300715-HL1 15"

Replaces 1300715-HL

For more information see www.springfieldgrp.com

CLASSIFICATIONS

B

B

@




58

PUMPS & PLUMBING

BILGE PUMPS – LoPro Series

LOPRO SERIES 900S

FULLY AUTOMATIC LOW PROFILE BILGE PUMP

Designed to bring automatic pumping power to tight spaces.

Rule’s LoPro Series Bilge Pumps are only 2.25” high. Yet each one can move a mighty

900 gallons per hour. In addition, the 900S model features two automatic modes.

The first one engages the pump when the water level reaches 1.3" or 2", and the second one checks for water by briefly turning on the pump every 2.5 minutes.

• Fully rotating discharge body – The entire body swivels up to 180˚, making the pump extremely easy to install.

• Threaded discharge nozzle – The threads allow the discharge nozzle to couple with either a staight or 90˚ fitting, both of which are included.

An included tricuspid check valve, used with the straight fitting, can be used to minimize the backflow of water.

• Multiple modes of operation – In addition to manual, the 900S features two automated modes of operation.

• Electronic automatic mode – The pump automatically turns on every 2.5 minutes to check for water, and if it’s detected the pump stays on until the water is gone.

• High or low water sensing mode – The low setting automatically starts the pump when the water level rises to 1.3", and the high setting engages the pump when the water rises to 2".

• Horizontal or vertical mounting – The 900S features a variety of mounting options to accommodate the boat’s design.

SPECIFICATIONS:

Voltage: 12 VDC

Flow: 900 GPH open flow at 13.6V

Amp Draw: 4A approximate

Protection: TCO

Port Configuration: 3/4", 1", 1-1/8" Straight,

90˚ 3/4"

Backflow preventer valve can be used with straight fittings

Dimensions: 2.3"H x 9.3"L x 2.3"W

ORDER NO.

Mfr. No.

272-09001 LP900S

SPECIFICATIONS:

Voltage: 12 VDC

Flow: 900 GPH open flow at 13.6V

Amp Draw: 4A approximate

Protection: TCO

Port Configuration: 3/4", 1", 1-1/8" Straight,

90˚ 3/4"

Backflow preventer valve can be used with straight fittings

Dimensions: 2.3"H x 7.6"L x 2.3"W

ORDER NO.

Mfr. No.

272-09002 LP900D

For more information see www.xylemflowcontrol.com

LOPRO SERIES 900D

LOW PROFILE HIGH CAPACITY BILGE PUMP

Designed to bring pumping power to tight spaces.

Rule’s LoPro Series Bilge Pumps are only 2.25” high, but can move a mighty

900 gallons per hour. Each one features a threaded discharge nozzle with straight and 90˚ fittings, and the body can swivel up to 180°, making it a great fit for small spaces and odd configurations.

• 900 gallon per hour capacity – The 900D can move a colossal 900 gallons of water per hour, even though it has an extremely low profile.

• Fully rotating discharge body – The entire body swivels up to 180°, making the pump extremely easy to install.

• Threaded discharge nozzle – The threads allow the discharge nozzle to couple with either a staight or 90˚ fitting, both of which are included. An included tricuspid check valve, used with the straight fitting, can be used to minimize the backflow of water.

• Horizontal or vertical mounting – The 900D features a variety of mounting options to accommodate the boat’s design.

• 12V DC operation – The pump operates on standard marine electrical power while delivering high capacity pumping power.

PLUMBING FITTINGS

EXHAUST PORTS

• Designed for engines with water cooled exhaust systems

• Optional flap for secure seal

• Molded in nylon (S.T. 801)

ORDER NO.


732-81000 8100 Exhaust Port, 3", Black

732-81040 8104 Exhaust Port, 4", Black

732-81170 8117 3 or 4" Exhaust Port Flap

732-81180 8118 3 or 4" Exhaust Port Split Pin

For more information see www.marineeast.com

New

Size

732-81000

59

PUMPS & PLUMBING

LIVEWELL ACCESSORIES

PRO LIVEWELL FLUSH MOUNT OXYGENATOR™

The OXYGENATOR Pro Livewell Flush Mount is the best way to ensure your fish stays alive and make it to the weigh in.

The OXYGENATOR is much more efficient than the traditional aeration process which produces much lower oxygen levels.

Using a patented process, the OXYGENATOR produces oxygen that is readily absorbed into the water which keeps bait and fish not only healthy, but livelier as well. This is the most efficient means of maintaining high-levels of oxygen in a livewell and nothing comes close to the OXYGENATOR’S ability to create an oxygen-rich environment. In addition, the OXYGENATOR uses advanced sensor technology to increase or decrease the frequency and duration of the output to maintain the highest yet safest dissolved oxygen level based on the livewell water temperature variation.

• 12V dc drawing less than 1 amp

• No switch required - automatically activated when livewell fills with water

• Easy installation instructions

• Silent running

• Emitter size: 3.375" in diameter

• Rated capacity: 10-20 gallons

ORDER NO.

Mfr. No.

205-88000 O2-BK3-DP


HIGH PERFORMANCE FIRST MATE

Designed specifically for Pontoon livewell and PWC Bilge applications.

Where space is at a premium and ease of maintenance is desired.

Easy to plumb 90˚ Dura Port makes short work of challenging hose routing.

ORDER NO.

847-21405-HP 21405HP 400 GPH, 12V

ONAN

ORDER NO. 651-01010

MODEL # G1010

Inlet port: 1"

Outlet port: 1"

Replaces G1006 (CC No. 651-01006)

For more information see: www.sherwoodpumps.com

60

Mfr. No.

Description

Capacity

Straight (13.6 V/27V)

30 L/min - 400 GPH

Amps Fuse Size Hose Size

2.5 A 5 A 3/4"

For more information see www.johnson-pump.com

ENGINE COOLING PUMP

ORDER NO.

651-10615

651-12231

651-04432

Mfr. No.

25073

25065

25066

Description

Major Repair Kit

Body

Housing

10615K-SHW+ Impeller

12231-SHW+ O-Ring

19295+ Wear Plate

04432-SHW+ Woodruff KeyNon-Rocking

25068 Shaft

651-04258

651-10929

651-19714

04258-SHW+ Retaining Ring (Ext)

25069+ Cover

24930+

25071

Slinger

Pulley/Gear

10929-SHW+ Cam

19714-SHW+ Cam Screw Assembly

651-22117

12211 Bearing Assembly

22117-SHW+ Seal/ Seat Assembly

25067+ Lip Seal

+ Items contained in Major Repair Kits

Qty

For more information see www.sherwoodpumps.com

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

PAINT & FIBERGLASS REPAIR

3M™ ACCUSPRAY™ HGP SPRAY GUN KIT

An HVLP gravity pressured spray gun, to be used with a pressurized

Pressurized

Gravity Feed for

High viscosity

Coatings

H/O cup system to provide superior application of high viscosity coatings.

Complete Kit Includes:

(1) HGP Spray Gun

(1) Air Flow Valve

(4) Atomizing Heads – 2 each 1.8mm nozzles & 2 each 2.0mm nozzles

Now you can spray those high viscosity coatings such as gelcoats, bottom paints, extremely heavy bodied primers and adhesives. Virtually any sprayable coating. The innovative 3M™ Accuspray™ System with its replaceable atomizing head, in conjunction with the 3M™ PPS™ Pressure cup allows for the following benefits:

Boosts Productivity

• Lowers application time

• High delivery rates

• Eliminates costly gun maintenance

• Builds mil thickness quickly

Reduces Coating Consumption

• Minimizes overspray

• Reduces coating waste

Maximizes Benefits of the 3M™ PPS™ System

• Reduces spray gun cleaning time

• Uses less solvent for clean up

• Decreases hazardous waste disposal cost

ORDER NO. 619-16587

Mfr. No. 16587

Technical Data

Weight

Operating Pressure (Full Trigger)

Operating Pressure (First stage)

Air Consumption

ACCESSORIES FOR ACCUSPRAY™ HGP SPRAY GUN

3M™ ACCUSPRAY™ ATOMIZING HEAD

REFILL KIT 2.0mm

Kit Includes: 4 Nozzles

Replaceable atomizing heads for use with the 3M™ Accuspray™ HGP Spray System

(619-16587).

ORDER NO. 619-16609

Mfr. No. 16609 4-Pack

11.4

15 psi max

25 psi max

10 cfm

3M™ PPS™ TYPE H/O PRESSURE CUPS

This product is intended for use in place of metal cups on most pressure cup guns. Setting up the pressure cup vs. standard PPS™ is connecting the pressure hose to the cup port to the pressure port on the spray gun, or spray gun regulator. For use with the 3M™ HGP Spray Gun kit

MINI H/O PRESSURE CUP

ORDER NO. 616-16121

Mfr. No. 16121 6 ounce (177 ml)

3M™ ACCUSPRAY™ FLUID NEEDLE

Replaceable fluid needle.

ORDER NO. 619-16571

Mfr. No. 16571

LARGE H/O PRESSURE CUP

ORDER NO. 616-16124

Mfr. No. 16124 28 ounce (828 ml)

3M™ ACCUSPRAY™ ATOMIZING

HEAD REFILL KIT 1.80mm

Kit Includes: 4 Nozzles

Replaceable atomizing heads for use with the 3M™ Accuspray™ HGP Spray Gun System

(619-16587).

ORDER NO. 619-30729

Mfr. No. 16611 4-Pack

3M™ PPS™ MINI

FILTERS/LIDS LINERS

Kit Includes:

(50) Disposable Lids with 200 micron filters

(50) Disposable Liners, (20) Sealing plugs

• Graduated measurement to 5-1/2 oz.

(with generic mix ratio film insert). Max capacity of 6 fl. oz.

For use with part number (619-16121)

ORDER NO. 619-16114 Mfr. No. 16114

3M™ ACCUSPRAY™

HG09 HVLP TEST AIR CAP

Provides the ability to test the

3M™ Accuspray™ Spray Gun System.

ORDER NO. 616-16572

Mfr. No. 16572

3M™ ACCUSPRAY™ AIR FLOW

CONTROL VALVE

For use with the 3M™ Accuspray™ Spray

Gun. Gauge face is colour-coded to indicate appropriate air pressure settings.

ORDER NO. 616-16573

Mfr. No. 16573

For more information see www.3m.com/marine

3M™ PPS™ LARGE

FILTERS/LIDS LINERS

Kit Includes:

(25) Disposable Lids with 200 micron filters

(25) Disposable Liners, (10) Sealing plugs

• Graduated measurement to 28 oz/840ml

(with generic mix ratio film insert). Max capacity of 32 fl. oz.

For use with part number (619-16124)

ORDER NO. 616-16024 Mfr. No. 16024

3M™ MINI LID & LINER DISPENSER

Wall mounted dispenser which is designed to hold at least

50 3M™ PPS™ Mini lids and liners. Easy loading from top with easy access to a new lid and liner. Keeps lids and liners clean, organized and safe from outside contamination.

ORDER NO. 619-16098

Mfr. No. 16098


3M™ PERFECT-IT™

100% WOOL COMPOUNDING PAD - 9"

Double sided, low linting, 100% wool, aggressive fast cutting compound pad. Designed to refine P1200 and finer sand scratches and other paint surface defects. Provides a finer finish than most 100% wool pads without lint mess.

For use with 3M™ Quick Connect Adapter 05752.

Suggested for use with Perfect-It™ Rubbing Compound

(39060, 06085, 06086)

ORDER NO. 600-33279

Mfr. No. 33279

3M™ PERFECT-IT™

100% WOOL POLISHING PAD - 9"

Double sided yellow blended wool, aggressive polishing pad.

Removes compound swirl marks and fine paint surface defects.

These high performance buffing pads make it quick and easy to attach pads to polishers, plus they perfectly center each pad every time.

For use with 3M™ machine polishes and 3M™ Quick connect Adapter 05752.

ORDER NO. 600-05754

Mfr. No. 5754

3M™ FLEXIBLE ABRASIVE HOOKIT™ SHEETS

For hand sanding applications including primer sanding, blend preparation and paint finishing. Combines excellent cut and finish performance with high flexibility, conformability and a soft feel. This product is excellent for sanding panel edges and parts that involve many hard-to-reach areas.

Sold in packs of 25.

ORDER NO.

Mfr. No. Grade

600-34337 34337 P400

600-34339 34339 P600

600-34340 34340 P800

600-34341 34341 P1000

600-34342 34342 P1200

600-34343 34343 P1500

3M™ PURPLE FINISHING FILM

HOOKIT™ - 6" DISCS

High performance aluminum oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use with a soft interface pad #05777 to scuff sand before painting. Use for scuffing the blend area before painting. Removes runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding.

Grade: P1000 Sold / Box of 50

ORDER NO. 600-30669 Mfr. No. 30669

3M™ DUST FREE HOSE

EXTENSION KIT

To be used for sanding with dust free blocks and tool. This kit will convert large hose dust free systems into a 20 foot, 1" outside diameter vacuum hose.

ORDER NO. 600-05215

Mfr. No. 05215

3M™ HOOKIT™ SANDING BLOCK

Used for sanding applications.

Size: 9" x 4-1/2"

ORDER NO. 600-05216

Mfr. No. 05216

3M™ HOOKIT™

PURPLE CLEAN

SANDING SHEET ROLL

Use for fine featheredging, and for final sanding or shaping of putty and primer.

3M’s fastest cutting, longest lasting abrasive for saving labor costs and improving quality. To achieve maximum performance,

3M has added hundreds of small holes arranged in a chevron formation. The holes allow for optimal particulate removal from the face of the sheet, improving performance when used with or without dust extraction. See page

797 of C.C. Marine Distributor 2013 Catalogue for other grade options.

ORDER NO.

Mfr. No. Grade Size(W x L)

600-30731 30731 P240 115mm x 12 m

600-30727 30727 P400 115mm x 12 m

3M™ 6" PURPLE CLEAN SANDING

HOOKIT™ DISCS

Features

• Precisely-patterned openings

• Hookit™ backing

Benefits

• Can reduce consumable costs

• Can improve productivity

• Cleaner work area

Advantages

• Reduced loading

• Up to two-times longer disc life than no-hole abrasives*

• Improved dust extraction over 5-hole and 6-hole discs

• Lining-up disc holes with disc pad hole not required

*Results may vary based on application.

See page 797 of C.C. Marine Distributor 2013 Catalogue for other grade options.

ORDER NO.

Mfr. No. Grade Discs/Box

600-01812 01812 P320 50

3M™ 6" PURPLE CLEAN

SANDING HOOKIT™ DISCS

Use for primer sanding, or preping before blending.

Use with a soft interface pad #05777.

Features

• Clear out more dust with less disc loading

• Hookit™ backing

Benefits

• Extended disc life

• Improve cutting ability

• Can reduce consumable costs

• Can improve productivity

• Cleaner work area

ORDER NO.

Mfr. No. Grade Discs/Box

600-30761 30761 P600 50


62


BIO-SOLV™

Bio-Solv™ is a tried and proven green solvent replacement which will out-perform traditional solvents such as Acetone, Xylene,

MEK and other solvent based cleaning products. It is ideally suited for a variety of industrial cleaning and surface preparation applications including metal surfaces, paint systems, pumps, overspray, adhesive clean-up, parts cleaning, vinyl graphics and graffiti removal. Bio-Solv™ can be easily recycled though simple filtering or distillation for repeated reuse, and the low evaporation rate and high solvency formula can significantly reduce overall solvent usage. It contains no water and is completely reactive, unlike other green solvents which may contain up to 50% water.

Features and Benefits

• Not a flammable liquid*. No special storage or DOT requirements.

• Excellent resin and adhesive cleaner.

• Cleans polyester, vinyl ester, and epoxy resins from tools and guns.

• Effective against polyurethanes, varnishes, enamels, and UV curable coatings.

• One cleaner does it all. Multiple solvents not required.

• Suitable for paint preparation and wipe down. Leaves no residue after drying.

•

• High solvency. Can effectively replace and outperform all petroleum based solvents.

Low vapor pressure and evaporation rate. Lasts five times longer than traditional solvents.

ORDER NO. Mfr. No. Size

• Easily recycled and reused. Saves money. Less downstream waste.

• May be diluted with water for extended applications.

• 100% bio-based, bio-degradable, and carbon neutral.

• No ozone depleting chemicals (EPA SNAP solvent).

• No environmentally hazardous ingredients.

• Made from renewable resources.

303-35332 CA35-332 Bio-Solv, US Pint

303-35333 CA35-333 Bio-Solv, US Quart

303-35335 CA35-335 Bio-Solv, US Gallon

303-35345 CA35-345 Bio-Solv, 40-CT, Cannister

303-35347 CA35-347 Bio-Solv, 100-Pk/Pre-Moistened Wipes

For more information see www.greenacetone.com

PENETRATING EPOXY RESIN

MAS Epoxies epoxy sealer is a low-viscosity epoxy formulation that penetrates deep into rotten or damaged wood, restoring structure, and providing a solid base for addional repairs. Easy two part system developed to penetrate soft rot damaged wood while restoring strength and structure to create a solid base. MAS penetrating epoxy system is particularly valuable when damage is limited to a portion of an otherwise sound component; or in cases where the damaged piece of wood is impossible or too costly to replace.

ORDER NO.


303-30210 30-210 Pint with hardener, US Pint

303-30220 30-220 Quart with hardener, US Quart

MARINE EPOXY RESIN 5 to 1 SYSTEM

Marine Epoxy Resin 5 to 1 is an epoxy resin that has been specifically formulated for bonding and coating wood. This resin has superior penetrating power, which lends itself to superior moisture and resistance and high strength. Marine Epoxy resin 5 to 1 is available for use with two hardeners of varying work life/gel time. They are well suited for sealing wood surfaces, bonding applications, general marine construction/repair, and the cold molding process for fabricating wood and fiberglass structures.

These systems are great for beginners and loved by professionals.


303-35710 30-710 1 Gallon - 5 to 1 Resin

303-35910 30-910 1 Quart - 5 to 1 Slow Hardener

303-35810 30-810 1 Quart - 5 to 1 Fast Hardener

303-35700 30-700 1 Quart - 5 to 1 Resin

303-35900 30-900 1 Pint - 5 to 1 Slow Hardener

303-35800 30-800 1 Pint - 5 to 1 Fast Hardener

303-35720 30-720 1 to 5 Gallon - 5 to 1 Resin

303-35920 30-920 1 Gallon - 5 to 1 Slow Hardener

303-35820 30-820 1 Gallon - 5 to 1 Fast Hardener

For more information see www.masepoxies.com

63


FLAG RESIN

Highly recommended resin for general purpose gluing

New

Size applications where wet-out of fiberglass is not a consideration, and for all filleting and fairing needs.

• Medium body resin specifically designed to perform as an adhesive and structural laminating foundation

ORDER NO. 303-00004

Mfr. No. FLAG4G Size: 4 US Gallon

RESINS

LOW VISCOSITY EPOXY RESIN

• Use for simple 2:1 ratio for mixing

• Easy wet-out of your material

• No messy wash downs

• Non-blushing, low viscosity, and low odour

• Used at room temperatures using your choice of

MAS hardeners (Fast, Medium & Slow) in a 2:1 mix ratio, resin:hardener

• Great for beginners

ORDER NO. 303-30003

Mfr. No. 30-003 Size: 4 US Gallon

New

Size

NON-BLUSHING HARDENERS

SLOW HARDENER

ORDER NO. 303-30008


MEDIUM HARDENER

ORDER NO. 303-30510


FAST HARDENER

ORDER NO. 303-30611

Mfr. No. 30-611 Size: 1 US Pint

ORDER NO. 303-30613


New

Sizes

ACCESSORIES


303-35757 35-657 Dispensing Gun - Single Cartridge

303-35739 35-739 9" Roller Cover Nylon short nap

303-35740 30-740 Calibrated Pump Set, 5:1

303-35662 35-662 Mixers (2 pack)

303-35663 35-663 Mixers (6 pack)

FILLERS

New

Sizes

CAB-O-SIL (COLLOIDAL SILICA)

For use when an extremely hard solid with high density is needed.

Application: Structural bonding, laminating, filling, & filleting

ORDER NO.

Mfr. No. Size

303-25001 25-001 US Quart

303-25002 25-002 US 1/2 Gallon

CELL-O-FILL

Non-toxic, non-carcinogenic. For use in place of Colloidal Silica when high strength and low density are required.

Application: Bonding, filling, & filleting

ORDER NO.

Mfr. No. Size

303-25003 25-003 US Quart

303-25004 25-004 US 1/2 Gallon

PHENOLIC MICRO BALLOONS

Organic phenolic hollow spheres for when low density, light weight, sandable, paint ready surfaces are required

Application: Fairing & filling

ORDER NO.

Mfr. No. Size

303-25008 25-008 US 1/2 Gallon

WOOD FLOUR

For use when a hard solid for filling & filleting is required.

Application: Wood gluing, filleting & bonding

ORDER NO.

Mfr. No. Size

303-25021 25-021 US 1/2 Gallon

303-35757

303-35740


64


ADHESIVES

The perfect All Around Adhesives

• Fast curing, translucent paste epoxy with unlimited bonding, sealing and filling applications

• For use by professionals, homeowners and DIY hobbyists

• Formulated with a viscosity like vaseline to be extremely versatile, flexible and resilient with enormous strength

• Easy to work with and won’t drip or sag when used overhead or on vertical surfaces

• Demonstrate excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water

• Both Gluzilla & Woodzilla mix better at 80˚F than 40˚F

• After cure both Gluzilla & Woodzilla can be painted, drilled, machined, sanded, filed, tapped or sawn

GLUZILLA - CAULK EPOXY CARTRIDGE

Suggested Uses:

As an Adhesive: Wood, metal (all types), glass, brick, block, concrete, stone, slate, fiberglass, tile, & other substances

As a Sealant: Oil, water & pressure tanks, cellar cracks, plumbing leaks, & much more

As a Filler: Holes, castings, patterns, molds, voids, welds, steering wheels, & much more

Please Note: Gluzilla will not bond to wax paper, teflon, polythylene and some other plastics. When in doubt, test a small area.

Size: 185 ml

ORDER NO. 303-35100 Mfr. No. 35-100

WOODZILLA - WOOD COLOURED

EPOXY CARTRIDGE

Suggested Uses:

As an Adhesive: Wood (all types), doors, chip board, window sills, decks, furniture, chairs

As a Sealant: Boat hulls, door frames, decks, window sills

As a Filler: Holes, castings, patterns, molds, voids, & much more

Size: 185 ml

ORDER NO. 303-35130 Mfr. No. 35-130

CRACKZILLA - LOW VISCOSITY EPOXY CRACK FILLER

Epoxy with a Filling Purpose

• Two component epoxy adhesive easily dispensed from a standard caulk gun

• Excellent adhesion and flow for quick repairs

Suggested Uses:

Concrete, acrylic, glass, stone, brick, sidewalks, foundations, steps

Size: 185 ml

ORDER NO. 303-35110 Mfr. No. 35-110


@




65


PAINT PRODUCTS

TOPSIDE ENAMELS

• Commercial grade

• Can be used on fiberglass, wood, aluminum & steel

• Colourfast & UV resistant

• Hard hi-gloss finish

• Abrasion & staining resistant

• Single component enamel

• Oil & gas resistant

• Superior colour retention

• Easy to obtain a smooth finish with brush or roller

ORDER NO.


353-52001 52001 Light Black (Qt)

353-52002 52002 Light Red (Qt)

353-52003 52003 Dark Blue (Qt)

353-52016 52016 International Orange (Qt)

353-52017 52017 Light Grey (Qt)

353-52018 52018 Medium Grey (Qt)

353-52021 52021 High-Gloss White (Qt)

353-52024 52024 Semi-Gloss White (Qt)

353-52094 52094 Dull Dead Grass (Qt)

180 WASH & DEWAXER

For use on bare fiberglass & aluminum surfaces

• Marine grade

• Formulated to strip mold release agent from fiberglass surface

• Removes grease and wax from gelcoat and aluminum

• Smooths surface for paint application

ORDER NO.

Mfr. No. Size

353-30000 30000 Quart

353-30100 30100 Gallon

For more information see www.aquagardboatpaint.com

SPECIALTY EPOXY PRODUCTS

A-788 SPLASH ZONE

Two-Part Epoxy Repair Compound

Extremely hard, abrasion and impact resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch or rebuild aluminum, wood, concrete, fiberglass, & steel. It can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, & more.

Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood.

Splash Zone’s rock-hard surface can be drilled, tapped, or machined.

Recommended for patching and repairing damaged underwater surfaces.

Not for use in potable water.

• Two-part multi-purpose epoxy patching & repair compound

• So versatile, it has been called “The duct tape of the marine world”

• Excellent for underwater repairs

• Produces a rock-hard protective surface

• Provides excellent protection against corrosion of metals

• Stops erosion and deterioration of concrete or wood

ORDER NO.

Mfr. No. Kit Size

50788-5001 A-788-SG2 2-Gallon Kit

50788-5002 A-788-HGS 1/2-Gallon Kit

For more information see www.pettitpaint.com

66

PROPELLERS & UNDERWATER HARDWARE

TRIM TABS

COMPLETE ELECTRIC

TRIM TAB KITS - 12V

Packaged with

Switch Kits

SPECIAL ORDER

ONLY

New

ELECTRIC TRIM TAB KITS

• Instant response electric actuators for precise control

• Everything is fully submersible and maintenance-free

• Clean, time saving installation

Each kit contains:

• Switch kit included

• 2 actuators - 6ft. leads w/ Deutsch connectors

• 2 (20ft.) Actuator extension harnesses

• 2 12 gauge stainless steel planes

• All stainless steel mounting hardware

ORDER NO.

Mfr. No. Boat Size Description

Length (L" x W")

288-15101 15101-104 16' - 25' 9" X 12" Standard

Trim Tab Kit

For more information see www.lencomarine.com

Switch Kit

Included

Double Rocker

Switch

AUTO GLIDE™ BOAT LEVELING SYSTEM AFTERMARKET KITS

The World’s Leading Boat Leveling Trim Tab System

A Real Automatic Boat Control / Trim Tab Control System that actually works – completely & automatically!

The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again!

The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed.

The Lenco Glide System will work on ALL boats with ALL engines. GPS data is used to provide data to the control box. Optional connection to NMEA 2000 is included.

• Boat must be equipped with Lenco Electric Trim Tabs

• Simple all in one solid state design

• Minimizes bow rise on take off

• Adjusts to changing sea conditions automatically

• Automatically trims boat to the most fuel efficient position

• Cuts planing time in half

• Manual override at the touch of a button

• Reads SmartCraft

NMEA 2000 & J1939 data

Kit Description

• 12 & 24 volt compatible

• Fast & easy installation

• All plug & play connections

• All waterproof, solid state components

(Key pad with waterproof connector)

(control box with waterproof mating connector)

• Quick response

• Built-in retractor for trim tabs except while in manual mode

• Dual station installations available

For more information see www.lencomarine.com

ORDER NO.


288-15500 15500-101 Aftermarket Auto Glide Kit

For Single Actuator Trim System

SPECIAL ORDER

ONLY

For more information see www.lencoautoglide.com

67


EVINRUDE

®

, JOHNSON

®

OUTBOARDS

40-75 HORSEPOWER • LARGE (4-1/4") GEARCASE

Thru Hub Exhaust & 13 Tooth Spline

40 HP E-Tec® .....................2004 & Newer 55 HP 2 Cyl. Commercial .....1980 & Newer 65 HP 3 Cyl. Commercial ..........1984-2001

45 HP 2 Cyl. Commercial..........1986-1995 55 HP E-Tec® ......................2009 & Newer 70 HP 3 Cyl. Pleasure ..........1974 & Newer

50 HP E-Tec® .....................2004 & Newer 60 HP 3 Cyl. Pleasure 1970-1971;1986-2001 70 HP 3 Cyl. Commercial ..........1974-2001

50 HP 2 Cyl. Commercial..........1977-1979 60 HP E-Tec® ......................2004 & Newer 70 HP 4-Stroke.....................1998 & Newer

50 HP 2 Cyl. Pleasure ...............1971-1974 60 HP 4-Stroke.....................1998 & Newer 75 HP 3 Cyl. Pleasure................1975-1984

50 HP 3 Cyl. Pleasure ...............1994-1998 65 HP 3 Cyl. Pleasure ................1972-1973 75 HP E-Tec® ......................2004 & Newer

55 HP 3 Cyl..............................1968- 1969

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

Part No.

941411

941413

941415

941417

941419

C.C. MARINE

ORDER NO.

999-41411

999-41413

999-41415

999-41417

999-41419

Note: For 60HP & 70HP 4-Stroke engine applications. 1998 & Newer use XHS II® (Drop-in Hub) Kit #210.

For all other engine applications use XHS II® (Drop-In Hub) Kit #206.

Do NOT use Gearcase

Adapter Ring supplied with propeller.

Drop-In Hub

Use XHS II®

Hub Kit

206 / 210

ORDER NO.

999-00206 /

999-00210

EVINRUDE

®

, JOHNSON

®

OUTBOARDS

85-140 HORSEPOWER • V-4 (4-1/4") GEARCASE


85 HP ....................1969-1980; 1991-1995 110 HP.......................................1986-1989 125 HP .....................................1971-1972

88 HP........................................1981-1996 112 HP.......................................1994-1996 130 HP E-Tec® .........................2004-2010

90 HP .................................1981 & Newer 115 HP ..................................

1973 & Newer 135 HP .....................................1973-1976

90 HP E-Tec® Std. Length ..2004 & Newer 115 HP E-Tec®

(Includes H.O.)

.2004 & Newer 140 HP .....................................1977-1994

100 HP ..................1979-1980; 1989-1993 120 HP ......................................1986-1994

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419



EVINRUDE

®

, JOHNSON

®

OUTBOARDS

90, 115 & 140 HORSEPOWER • JOHNSON (4-1/4") GEARCASE


90 HP 4-Stroke .........................2002-2005 115 HP 4-Stroke ........................2002-2005 140 HP 4-Stroke........................2002-2005

Drop-In Hub

Use XHS II®

Hub Kit

206

ORDER NO.

999-00206

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

Part No.

941411

941413

941415

941417

941419

C.C. MARINE

ORDER NO.

999-41411

999-41413

999-41415

999-41417

999-41419

Note: For 90 & 115HP 4-Stroke engine applications use XHS II® (Drop-In Hub) Kit #225.

For 140HP 4-Stroke engine applications use XHS II® (Drop-in Hub) Kit #226.

Use Gearcase Adapter

Ring supplied with propeller.

Drop-In Hub

Use XHS II®

Hub Kit

225 / 226

ORDER NO.

999-00225 /

999-00226

For more information see www.miwheel.com

68


FORCE

®

, CHRYSLER

®

U.S. MARINE OUTBOARDS

85-150 HORSEPOWER • DUAL EXHAUST UNITS • 4-1/4" GEARCASE


85 HP .......................................1988-1989 120 HP ......................................1990-1994 150HP ...................................... 1989-1994

90 HP .......................................1990-1994 120 HP L-Drive ..........................1989-1991 150 HP L-Drive ...................................1991

90 HP L-Drive ...........................1989-1991 125 HP.......................................1988-1989

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419



Drop-In Hub

Use XHS II®

Hub Kit

202

ORDER NO.

999-00202

FORCE

®

, CHRYSLER

®

U.S. MARINE OUTBOARDS

75-150 HORSEPOWER • USING MERCURY (4-1/4") GEARCASE


75 HP * ...............................................1999

120 HP * ..............................1995 & Newer 150 HP + ...........................................................

1989-1994

90 HP * ................................1995 & Newer 120 HP L-Drive + ........................1990-1991 150 HP L-Drive ...................................1991

90 HP L-Drive + .........................1990-1991

* For all units 1995 & Newer. Requires thrust washer 13191A1 + For dual exhaust units only. Requires thrust washer 23-819057

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419



Drop-In Hub

Use XHS II®

Hub Kit

202

ORDER NO.

999-00202

HONDA

®

OUTBOARDS

60-130 HORSEPOWER • 4-1/4" GEARCASE


BFP 60.................................2010 & Newer BF 90 ....................................1995 & Newer BF 130 ...............................................................

BF 75...................................1995 & Newer BF 115 .......................................1998-2010

1998-2004

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

Part No.

941411

941413

941415

941417

941419

C.C. MARINE

ORDER NO.

999-41411

999-41413

999-41415

999-41417

999-41419

Note: For BF 75 & BF 90HP 1995-1998 engine applications use XHS II® (Drop-in Hub) Kit #202.

For BF 75 & BF 90HP 1999 & Newer engine applications use XHS II® (Drop-in Hub) Kit #207.

For BFP 60, BF 115 & BF 130HP 1998 & Newer engine applications use XHS II® (Drop-in Hub) Kit #207.



Drop-In Hub

Use XHS II®

Hub Kit

202 / 207

ORDER NO.

999-00202

999-00207


69


MERCURY®, MARINER®, SEARAY OUTBOARDS



40 & 50 HP 4-Stroke/Bigfoot .......All Years 80 HP ........................................1978-1989 100 HP .....................................................

1988 & Newer

60 HP 4-Stroke/Bigfoot .......1995 & Newer 80 HP (Mariner®) .....................1978-1983 115 HP (Yamaha®)...................1978-1983

60 HP (Sea Pro/Marathon) ..1995 & Newer 80 HP (Model 800; 2 & 4 Cyl.) ...Thru 1977 115 HP .................................1978 & Newer

65 HP (Model 650 - 2 Cyl.)........Thru 1971 80 HP (Yamaha®) ....................1977-1983 115 HP 4-Stroke ..................2001 & Newer

65 HP (Model 650 - 4 Cyl.).......1961-1970 85 HP (Model 850; 2 & 4 Cyl.) ...Thru 1977 125 HP ......................................1994-2005

70 HP .......................................1987-1989 90 HP (Yamaha®) ....................1978-1983 140 HP (Includes Sea pro/Offshore) ....1978-1981

75 HP (Sea Pro/Marathon) ...........All Years 90 HP 2-Stroke ....................1978 & Newer 140 HP (Yamaha®)...................1978-1979

75 HP 2-Stroke .........................1984-2005 90 HP 4-Stroke ....................2001 & Newer Models 900-1150-1500..............Thru 1977

75 HP 4-Stroke....................2001 & Newer

Includes EFI Engines

Vortex (Aluminum)

Dia. Rot.

13-7/8 R

Pitch

11

Bld#

3

13-7/8 R

13-3/8 R

13 R

12-1/2 R

13

15

17

19

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419



Drop-In Hub

Use XHS II®

Hub Kit

202

ORDER NO.

999-00202

NISSAN®, TOHATSU® OUTBOARDS



60C (Large Gearcase) ................Thru 1999 90 HP ........................................1987-2001 120 HP ..............................................................

1988-2003

70C (Large Gearcase) ................Thru 2002 90 HP TLDI...........................2001 & Newer 140 HP .....................................1988-2003

70 HP TLDI ...............................2002-2009 115 HP .....................................1992-2001

75 HP TLDI..........................2010 & Newer 115 HP TLDI ........................2004 & Newer

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419



Drop-In Hub

Use XHS II®

Hub Kit

209

ORDER NO.

999-00209

SUZUKI® OUTBOARDS



DF 60 4-Stroke .........................1998-2009 DT 85 ........................................1979-2000 DT 115 ...............................................................

1981-2001

DF 70 4-Stroke .........................1998-2008 DT 90.........................................1989-1997 DT 140 .....................................1981-2001

DT 75........................................1983-1997 DT 100 .....................................1989-2000

Vortex (Aluminum)

Dia. Rot.

13-7/8 R

Pitch

11

Bld#

3

13-7/8 R

13-3/8 R

13 R

12-1/2 R

13

15

17

19

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419

Drop-In Hub

Use XHS II®

Hub Kit

210

ORDER NO.

999-00210 Do NOT use Gearcase



70


SUZUKI® OUTBOARDS

70-140 HORSEPOWER (4-STROKE) • 4-1/4" GEARCASE


DF 70A 4-Stroke..................2009 & Newer DF 90A 4-Stroke ..................2009 & Newer DF 115A 4-Stroke ..........................

2013 & Newer

DF 80A 4-Stroke..................2009 & Newer DF 100 4-Stroke ...................2009 & Newer DF 140 4-Stroke .......................2002-2012

DF 90 4-Stroke .........................2001-2008 DF 115 4-Stroke ......................2001-2012 DF 140A 4-Stroke.................2013 & Newer

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

Part No.

941411

941413

941415

941417

941419

C.C. MARINE

ORDER NO.

999-41411

999-41413

999-41415

999-41417

999-41419

Note: For DF 90 / DF 100 / DF 115HP 4-Stroke engine applications use XHS II® (Drop-In Hub) Kit #225.

For DF 115A / DF 140HP / DF 140A 4-Stroke engine applications use XHS II® (Drop-In Hub) Kit #226.

For DF 70A / 80A / 90A applications use XHS II® (Drop-In Hub) Kit #227.



Drop-In Hub

Use XHS II®

Hub Kit

225 /226

/227*

ORDER NO.

999-00225/

999-00226/

999-00227

*XHS II 227 Hub Kit

Not Available in Solid

Hub

YAMAHA® OUTBOARDS


Thru Hub Exhaust & 15 Tooth Spline • Replaces Yamaha® “K” Series Propellers

T50 HP ................................1996 & Newer 75 HP (Includes C75/E75/P75) ...1994-1999 90 HP (Includes C90) ................

1984 & Newer

DF 80A 4-Stroke..................2003 & Newer 80 HP ..................................................1997

F100 4-Stroke ...........................1999-2002

60 HP (Includes C60/E60/P60) ...1992-2005 F80 4-Stroke ............................1999-2002 F115 4-Stroke ......................2000 & Newer

F70 4-Stroke .......................2010 & Newer 85 HP .......................................1991-1997 115 (Includes C115/P115) ...1984 & Newer

70 HP ..................................1984 & Newer F90 4-Stroke .......................1999 & Newer 130 HP ......................................1984-2003

F75 4-Stroke .......................2003 & Newer

Vortex (Aluminum)

Dia. Rot.

13-7/8 R

Pitch

11

Bld#

3

13-7/8 R

13-3/8 R

13 R

12-1/2 R

13

15

17

19

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419

Note: For 115HP, F115 (4-Stroke), and 130 HP engine applications use XHS II® (Drop-in Hub) Kit #203.

For all other engine applications use XHS II® (Drop-In Hub) Kit #208

OMC® OUTBOARD MARINE STERNDRIVES

MODEL 400, COBRA® • 4-1/4" GEARCASE


Model 400 Cobra®

2.3 L (120 HP)...........................Thru 1991 2.3 L (128 HP) ...........................1988-1991

2.5 L (120 HP) ...........................1978-1984 2.5 L (120 HP) .........................1985-1987

3.0 L (140 HP)...........................Thru 1989 3.0 L (140 HP) .........................1985-1987

Vortex (Aluminum)

Dia. Rot.

Pitch Bld#

13-7/8 R

13-7/8 R

13-3/8 R

13 R

12-1/2 R

11

13

15

17

19

3

3

3

3

3

C.C. MARINE

Part No.

ORDER NO.

941411 999-41411

941413 999-41413

941415 999-41415

941417 999-41417

941419 999-41419





Drop-In Hub

Use XHS II®

Hub Kit

203 /208

ORDER NO.

999-00203/

999-00208

Drop-In Hub

Use XHS II®

Hub Kit

206

ORDER NO.

999-00206


71


Replacing a Flo-Torq® Hub with Michigan Propellers

Propellers supplied from Mercury®, Mariner® and Force® since 1996 come with the Flo-Torq® II drop in hubs.

When switching to Michigan Match® or Ballistic® propellers, change the attaching hardware set-up as follows.

When converting to a Michigan Propeller on a V-4 gearcase, eliminate B & C, replace A with H and use existing hardware F & G.

When converting to a Michigan Propeller on a V-6 gearcase, eliminate B & C and use A, D, E, F & G as attaching hardware (D & E replace C).

Be sure to use high-performance trim tab 822777A1 for stainless steel installations.

Michigan Wheel offers the following attaching hardware kits for these installations:

990312 Includes D & E for the V-6 gearcase

990332 Includes forward Thrust Washer H for V-4 gearcase

9661-1 Includes A, D, E, F & G for the V-6 gearcase

9660-1 Includes H, F & G for the V-4 gearcase

HARDWARE KITS

ORDER NO.


999-66010 9660-1 Propeller Hardware Kit, Mercury, V-4

999-66011 9661-1 Propeller Hardware Kit, Mercury, V-6

999-90312 990312 Castle & Star Washer

999-90332 990332 Thrust Washer, Forward

If your engine is a Mercury built prior to 1978, additional parts may be needed for installation.

For 4-Blade Evinrude®/Johnson® installations, use Michigan Wheel Marine thrust washer 9500-140.

ORDER NO.


999-50014 9500-140 Thrust Washer, OMC


ENGINE ACCESSORIES

BRASS KEY STOCK

ORDER NO.

Mfr. No. Shaft Size Qty

Diameter

655-59011 590011 3/4" 3/16 x 1-1/2" 1

655-59021 590021 7/8" 1/4 x 1-25/32" 1

655-59031 590031 1 & 1-1/8" 1/4 x 2-1/8" 1

655-59041 590041 1-1/4" 5/16 X 2-13/16" 1

655-59051 590051 1-3/8" 5/16 x 3-3/16" 1

72

For more information see www.handimanmarine.com

FUEL SYSTEM & HOSE

PORTABLE FUEL - JERRY CANS

Scepter Continues to Set the Standard for the Way You Flo n’ Go

Always the leader in portable fuel can technology, Scepter developed the original plastic Jerry Can and changed the industry forever. For almost half a century Scepter has continued to set the standard with evolving product features that are breaking new ground in awayfrom-the-pump fuel transport and transfer like our new Child Resistant Closures (CRC’s) available on our full line.

• Scepter Jerry Cans are virtually indestructible, manufactured from high-density, unbreakable polyethylene that is rustproof, crush-resistant and non-corroding.

• Self-Venting Jerry Cans feature a reversible self-venting spout – no need to worry about separate vent closures

• All sizes easily attach to the patented Flo n‘ Go™ hand pump.

• Extra Large, durable, molded-in handle provides superior comfort, pouring and carrying ability .

ORDER NO.

Mfr. No. Capacity Description

080-07081 07081 5 Litre Self Venting Jerry Can w/ CRC1.25 Gal.

080-07079 07079 10 Litre Self Venting Jerry Can w/ CRC 2.5 Gal.

080-07539 07539 25 Litre Self Venting Jerry Can w/ CRC 6.6 Gal.

080-07622 07622 20 Litre Self Venting Jerry Can w/ CRC 5. Gal.

080-04933 04933 20 Litre Manual Venting Water Jerry Can

(Light Blue) 5.3 Gal

080-03711 03711 20 Litre Manual Venting Military Style

Diesel Can, (Yellow) 5.3 Gal

New

For more information see www.sceptermarine.com

MILITARY STYLE

DIESEL CAN

• UN approved

• Used by most NATO countries

• Fits standard military bracket

• Flouro-elastomer gasket doesn’t swell

• Can be used with blended fuels

ACCESSORIES

OETIKER® STEPLESS®

EAR HOSE CLAMPS

• Forms a full 360˚ circle

• Tongue and groove interlock design

• Fast clamping with tool

• Specially formed strip edges reduce the risk of damage to the part being clamped

• No leaks around hose

• Light weight design

• 100 ea. per bag

ORDER NO.

Mfr. No. Size Included

in Kit

167-00001 16700001 5.8 - 7.0mm

167-00004 16700004 7.8 - 9.5mm

167-00006 16700006 8.8 - 10.5mm (3/8)Y

167-00007 16700007 9.6 - 11.3mm

167-00010 16700010 10.8 - 13.3mm

167-00012 16700012 11.5 - 14.0mm

167-00013 16700013 12.0 - 14.5mm

167-00016 16700016 13.2 - 15.7mm

167-00017 16700017 14.5 - 17.0mm (5/8)

167-00020 16700020 15.3 - 18.5mm

167-00024 16700024 17.8 - 21.0mm (3/4)

167-00031 16700031 22.4 - 25.6mm (1)

167-00037 16700037 26.9 - 30.1mm

167-00040 16700040 28.4 - 31.6mm

167-05989 16705989 37.8 - 41.0mm

Installation Tool Description

141-00118 14100118 Standard Jaw

Pincer Pliers

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

OETIKER® STEPLESS®

EAR CLAMP KIT

• Great for shop or rigging work

• Contains 10 each of the 15 most needed sizes

• Complete with connection tool

ORDER NO.

Mfr. No. Size

185-00000 18500000 Stepless® Clamp

Rigging Kit


73

FUEL SYSTEM & HOSE

205-00301

RIGGING ACCESSORIES

•

RIGGING FLANGE

• Completes professional rigging installation

• Complies with ABYC-NMMA specifications

• Fuel hose port fits type “A” hose and hose union fits type “A” and “B” hose

Installs with T-H Marine rigging hose

ORDER NO.


205-00300 RFFHP-1-DP Rigging Flange w/ Fuel Hose Port, Black

205-00350-1

RIGGING FLANGE

& HOSE

• Protects cables, hoses and wiring from elements

• Molded polypropylene flange threaded to retain hose

• Vinyl cap provides closure for the engine end of hose

ORDER NO.


205-00301 RF-1-DP Rigging Flange, Black

Fits 2" Rigging Hose

205-00350-1 RFH-1-DP 2" x 50 Ft. Hose, Black


FUEL LINE ACCESSORIES

ORDER NO.

Mfr. No.

018-70830 18-7083

PRIMER BULB

Fits:

30 2 cycle (All)

30 JET 3 cycle (All)

40 2 cycle (All)

40 3 cycle (All)

40 JET (All)

50 3 cycle (G590000 & Up)

55 3 cycle (G590000 & Up)

60 3 cycle (G590000 & Up)

60 3 cycle Bigfoot (All)

65 JET (All)

75 3 cycle (D283222 & Up)

90 3 cycle (D283222 & Up)


@




74

ENGINE & DRIVE PARTS

EXHAUST ELBOWS

OMC

MODEL 5.0/5.8L/5.8 & 351 KING EFI - V8, FORD 302/351 CID (1991 & Up)

ORDER NO.

Mfr. No. OEM No. Description

626-51334 51334 3855269 Exhaust Elbow Assembly

-STBD (1993-96 EFI)

626-51334

VOLVO PENTA

MODEL 5.0/5.8L & Fi/FSi - FORD 302/351 CID V8 S.B.

(1993 & Up)

ORDER NO.

Mfr. No. OEM No. Description

626-51334 51334 3855269 Exhaust Elbow Assembly

-STBD ( EFI)

For more information see www.glmmarine.com

FUEL FILTER WATER SEPARATOR

SNAPP™ FUEL FILTER

WATER SEPARATOR FOR OUTBOARDS

The fuel filter change... that changes everything

The One-Piece, High Performance Snap-In Fuel Filter Water Separator

Fits anywhere – Protects Everywhere

• Now the fastest fuel filter change is also the smartest

• No Tools, No Mess, No Fuss

• One-Piece Leak-Free Construction

• Now, filter changes are a SNAPP!

• Snapp™ is 100% Racor quality

• Legendary Aquabloc® filter media delivers efficiency in 2, 10 or 30 micron

• Trademark Racor clear bowl for instant water-in-fuel inspection – Won’t Rust!

• Self-venting drain for easy service

• Heavy-duty high impact nylon construction won’t corrode

• Rugged electrostatically-coated mounting bracket

Features:

• Easy to install and service

• Patented easy priming system

• For all small engines up to 140 hp – Diesel / Bio-Diesel / Gasoline

• Fuel fitting connection: Includes 3/8" quick connect fittings

(per SAE J2044) for use with 5/16" I.D. hose

• Large finger tabs for one-handed removal

• Compact design

Maximum Flow Rate

Horsepower Range

Aquabloc Micron

Height

Width

Depth

Water Sump Capacity

Body Material

Bracket Material

Port Size

Quick Connect Fittings

Rated Pressure

Water Removal Efficiency

Rated Temperature Range

SPECIFICATIONS

26 gph (100 lph) up to 140 hp

2, 10, or 30 micron

7.8" (198 mm)

3.8" (97 mm) at bracket

4.1" (104 mm)

3.4 oz. (100 ml)

Nylon 6 plastic

Coated Steel

3/8" (9.5 mm)

3/8" (9.5 mm) per SAE J2044

50 PSI (3.5 bar)

99%

-20˚ to 150˚F (-29˚ TO 66˚C)

Mobile SNAPP™ First Fit Assembly

(Powder Coated Steel Bracket)

ORDER NO.

Mfr. No.

Micron

209-23106-02 23106-02 2

209-23106-10

209-23106-30

23106-10

23106-30

10

30

Mobile SNAPP™ Replacements

(Powder Coated Steel Bracket)

209-23107-02 R23107-02 2

209-23107-10 R23107-10 10

209-23107-30 R23107-30 30

Marine SNAPP™ First Fit Assembly

(Stainless Steel Bracket)

ORDER NO.

209-23281-02

209-23281-10

209-23281-30

Mfr. No.

23281-02

23281-10

23281-30

Micron

2

10

30

Marine SNAPP™ Replacements

(Stainless Steel Bracket)

209-23280-02

209-23280-10

209-23280-30

R23280-02

R23280-10 10

R23280-30

2

30

SNAPP™ fuel filter water separators are packaged for a first installation with mounting bracket and quick connect fittings.

The replacement kit includes a new SNAPP™ filter and priming accessory. Note: Kits include Aquabloc media in 2, 10 or 30 micron ratings.

Two micron is recommended for ultra fine filtration of solid contaminants.

For more information see www.parker.com/racor

75

ENGINE & DRIVE PARTS

FUEL FILTERS

MERCURY VERADO FILTER

Replacement Filter for Mercury Engines – 31871 Twin Pack

You should always carry extra replacement elements as one tankful of dirty fuel can plug a filter. The 31871 solves this problem by providing two filters in every pack!

• Legendary Aquabloc®II, 2 micron filter media, removes up to 100% of free water and protects sensitive fuel system components from particulates

• Meets or exceeds OEM requirements

• Compatible with ethanol gasoline blends

• Height: 5" (12.7 cm), Diameter: 2.1" (5.3 cm)

• Replaces Mercury filter no. 35-884380T or 35-8M0020349

ORDER NO. 209-31871

Mfr. No. 31871 (2 per pack)

GASOLINE SPIN-ON SERIES

GASOLINE FUEL FILTERS

SPECIFICATIONS

025-RAC-01

Outboard

025-RAC-02

Outboard

025-RAC-10

Outboard/Inboard

Micron 250 10 104

Maximum Flow Rate 25 GPH (95 LPH) 25 GPH (95 LPH) 35 GPH (132 LPH)

Ports 1/4"-18 NPTF 1/4"-18 NPTF 1/2"-14 NPTF

Replacement Filter

Height

Diameter

Width

S2501

4.3" (10.9 cm)

2.1" (5.3 cm)

2.3" (5.8 cm)

S2502

4.3" (10.9 cm)

2.1" (5.3 cm)

2.3" (5.8 cm)

Replace Entire Unit

4.2" (10.7 cm)

1.9" (4.8 cm)

N/A

ORDER NO.

209-025RAC01 209-025RAC02 209-660RAC01

025-RAC-01

025-RAC-10

025-RAC-02

REPLACEMENT GASOLINE ELEMENT

S3220SUL

Mercruiser Inboard/Outboard Application

• Replacement element for B32020MAM

• 2 Micron

• Maximum Flow Rate: 60 GPH (227 LPH) Gas

• Maximum Flow Rate: 30 GPH (114 LPH) Diesel

• Height: 4.0" (10.2 cm)

• Diameter: 3.7" (9.4 cm)

• Center Threads: 11/16"-16**

** The 11/16"-16 thread is the most common and fits most existing filter mounting heads in service

ORDER NO. 209-03220S-UL

Mfr. No. S3220S-UL

For more information see www.parker.com/racor

INTERIOR HARDWARE & APPLIANCES

REFRIGERATORS

Norcold offers a comprehensive line of top-performing AC/DC refrigerators for reliable performance for all marine applications.

Norcold refrigerators are quiet, dependable and designed for years of reliable service – perfect for boats, RV’s, and vans.

NR740 – 1.7 CU. FT.

AC/DC Refrigerator

• NEW - Danfoss BD35 compressor improves performance, especially at higher ambient temperatures

• NEW - LED interior light

• Improved styling - new hidden ventilation grill

• Fits the same cutout as the old 0740 model

• Base model is 12/24 DC - AC operation comes w/optional power cord

• Closing freezer door

• Can be flush- or proud-mounted without additional hardware

• Self-venting - a Norcold exclusive

• EV model for European Voltage applications

• 2-Year Warranty

• Installation Dimensions: 20-1/2"H x 15-1/4"W x 17-7/8"D Flush 19-15/16"

ORDER NO.

Mfr. No. Description Finish

905-07400 NR0740BB AC/DC Refrigerator, Built-in, 1.7 cu. ft., Black

905-07400-2 NR0740SS AC/DC Refrigerator, Built-in, 1.7 cu. ft., Stainless Steel

NR751 – 2.7 CU. FT.

AC/DC Refrigerator

• NEW - Danfoss BD35 compressor improves performance, especially at higher ambient temperatures

• NEW - LED interior light

• Improved styling - new "hidden" ventilation grill

• Fits the same cutout as the old 0751 model

• Base model is 12/24 DC - AC operation comes w/optional Power Cord

• Closing freezer door

• Self-venting - a Norcold exclusive

• 2-Year Warranty

• Installation Dimensions: 20-1/2"H x 18-1/2"W x 21-1/16"D Flush 23-3/16"

ORDER NO.

Mfr. No. Description Finish

905-07510 NR0751BB AC/DC Refrigerator, Built-in, 2.7 cu. ft., Black

905-07510-2 NR0751SS AC/DC Refrigerator, Built-in, 2.7 cu. ft., Stainless Steel

For more information see www.norcold.com

77

LUBRICATION & SHOP SUPPLIES

M.E.D.S. MARINE DIAGNOSTICS SOFTWARE

Software Capabilities:

• Multi-engine platform

• Live 3D digital dashboard

• Live digital charts

• Engine system data

• Auto self test

• Engine History Data

• Freeze frames – engine faults in operation

• Special function, tachometer, and output load tests

• M.E.D.S. Check report – customized for each customer

French & Spanish versions available

Portable, simple-to-use interface. Plug and play system.

Saves you time and money!

M.E.D.S. works with most major engine brands.

Compatible to test most Mercury, Mariner, Mercruiser, Johnson,

Evinrude, Yamaha, Yamaha PWC’s, Suzuki, Volvo Penta,

MEFI 1-4, and select gasoline inboard engines.

Features:

• Hands free information

• Engine configuration data

• Displays active & inactive faults

• Clear faults with a single click

• Displays run history by RPM range and # of hours

• MEDS help built in

• Display engine functions during a fault

(i.e. an engine stall)

• Drill down to the engine failure (i.e. injector)

• Individually test components (i.e. one injector at a time)

ORDER NO.

Mfr. No. Description

531-01180-B 531-0118B (BRP Platform Version 4.0)

531-01180-14 531-0118I 4 (MEFI Version)

531-01180-15 531-0118I 5 (CANbus Platform)

531-01180-M 531-0118M (Mercury Version 3.0)

531-01180-S 531-0118S (Suzuki)

531-01180-T 531-0118T (Mercury & Yamaha)

New

531-01180-T1 531-0118T 1 (Mercury, Yamaha, BRP)

531-01180-T2 531-0118T 2 (Mercury, Yamaha, BRP, Suzuki)

531-01180-T3 531-0118T 3 (Mercury, Yamaha, BRP, Suzuki, MEFI)

531-01180-T4 531-0118T 4 (Mercury, Yamaha, BRP, Suzuki, MEFI, CANbus)

531-01180-U 531-0118U (Software Update from 5.0 to 6.0)

531-01180-Y 531-0118Y (Yamaha Version 3.0)

531-01190-B 531-0119B (Add BRP to Upgrade)

531-01190-14 531-0119I 4 (Upgrade to MEFI 1-4, I/O Sterndrive)

New 531-01190-15 531-0119I 5 (Upgrade to MEFI 1-4), CANbus)

531-01190-M 531-0119M (Upgrade 531-0118Y to Mercury Version 3.0)

531-01190-MP 531-0119MP (Upgrade 531-0118Y to Mercury Plus)

531-01190-S 531-0119S (Add Suzuki to Upgrade)

531-01190-Y 531-0119Y (Add Yamaha to Upgrade)

New

531_0118T 4

@




For more information see www.cdielectronics.com or Call CDI Tech Support 1-866-423-4832

78


engine

diagnostics =

STATS™ (Sierra Touch And Test System) is an innovative new handheld portable engine diagnostic tool from Sierra.

Now a marine technician can plug into a marine engine’s Electronic Control module (ECM) and diagnose engine problems without needing a laptop or PC. Techs will save time – and dealers will save money – moving directly to the job, instead of having to maneuver a boat trailer or motor on a stand to the computer bay, or roll around an ungainly computer cart. Techs can even perform engine diagnostics on boats while they’re still in the water.

STATS is the perfect solution for performing diagnostics on your marine engine. This self contained system requires no additional computer hardware to operate and works with most popular watercraft including, outboard, sterndrive, & inboard engines worldwide. Also includes PWCs.

The console integrates an easy to use touch screen with a left/right tactile user interface to create an efficient user experience.

• ECU Identification

• Reads Fault Codes

• Clears Fault Codes

• Displays Live Data

• Performs Engine Systems Tests

• Stationary Tests

• Service Info

• Vibration Proof

• Splash Proof

• Service Reset

• Component Actuation

• Internet Software Updates

• Print & Save Service Results

• USB, PC Interface

• Standard & Test Software

• Number of hours engine has run

• Programs keys and remotes on systems that have this capability

STATS ADD-ON UPGRADE SOFTWARE

ORDER NO.

180-00111

180-00112

180-00113

180-00114

180-00115

180-00116

180-00117

180-00413

Mfr. No.

18-SD111

18-SD112

18-SD113

18-SD114

18-SD115

18-SD116

18-SD117

180-00405-SD 18-SD405

180-00406-SD 18-SD406

180-00407-SD 18-SD407

18-SD413

STATS DIAGNOSTIC SYSTEM COMPLETE KITS

Description

Mercury/Mercruiser/MEFI Add-On Software

BRP Add-On Software

Yamaha Outboard Add-On Software

Suzuki Add-On Software

Yamaha PWC Add-On Software

Kawasaki Add-On Software

Sea Doo Add-On Software

Hydrospace/Benelli/Weber

Volvo D3, D4, D6

Yanmar Diesel

MEFI V-VI Upgrade kit

New

New

New

New

STATS Diagnostic System

Full PWC Package

For: Sea-Doo, Yamaha PWC, Kawasaki,

Hydrospace/ Benelli/Weber PWC

ORDER NO.

180-00118

Mfr. No.

18-SD118

STATS Diagnostic System Inboard/Outboard Package

For: Mercury/Mercruiser/MEFI I-IV,

BRP, Yamaha, Suzuki Outboard, Volvo

Diesel, Yanmar Diesel

ORDER NO.

180-00119

Mfr. No.

18-SD119


Volvo

For: Volvo D3, D4, D6 Package

ORDER NO.

180-00120

Mfr. No.

18-SD120


Complete Kit Plus

For: Mercury/Mercruiser/MEFI I-IV,

BRP, Yamaha, Suzuki, Volvo Diesel,

Yanmar

Diesel,

Sea-doo,

Yamaha

PWC,

Kawasaki

PWC, Hydrospace/Benelli/

Weber PWC.

ORDER NO.

180-00202

Mfr. No.

18-SD202


Tester Only Kit

Tester and basic cables included.

(Will require purchase of Software

Upgrade kits for use)

STATS DIAGNOSTIC SYSTEM ACCESSORIES

ORDER NO.

Mfr. No.

180-00510 18-ADA510

Description

MEFI Neoprene Cable Bag

180-00512 18-ADA512 STATS Volvo Neoprene Bag

180-00300E 18-ADC300E STATS Master Cable 20'

180-00415 18-ADC415

180-00417 18-ADC417

180-00425 18-ADC425

180-00199 18-ADC199

Volvo Diesel Diagnostic Cable

Yanmar Diesel Diagnostic Cable

MEFI V-VI Cable

Jack Screws for STATS Console

ORDER NO.

180-00100

Mfr. No.

18-SD100


for multiple engines

79

New


PORTABLE POWER PACKS

RESCUE™ JUMP PACK 2100

The Rescue™ Jump Pack 2100 is a second generation dual voltage portable power pack that uses advanced technology microprocessor controls to offer a level of safety and performance that is unique in the industry.

The advanced analytical display on the membrane panel provides user feedback on the state of the external battery to be jump started as well as the batteries inside the Rescue 2100. Quick Cable’s exclusive voltage and polarity protection prevents the unit from engaging when the unit is connected incorrectly, either through reversed polarity, or incorrect voltage setting.

The Rescue 2100 can also be used in very low voltage situations or as a power source for 12V or 24V equipment without the polarity and voltage protection features. An all-new digital battery meter displays both internal and external battery voltage, and indicates recharging and fully-charged internal batteries. LED’s signal system voltage selection, low internal battery voltage, low voltage situations and reversed polarity. A 12V cigarettestyle power outlet protected by an internally-resetting 15 amp circuit breaker, and a USB charging port are both provided. A selectable worklight/safety flasher is built in. Like all

Rescue portable power packs, the 2100 comes with a built-in battery charger. The 62" booster cables are all-copper welding cable to stay flexible even in subzero temperatures and feature heavy duty parrot clamps. With 4000 peak amps at 12V, the 2100 offers commercial-grade power for cars, trucks and commercial equipment in a hand-carried package, and Quick Cable backs it with a 12 month limited warranty.

• 12/24V power

• Dual 12-Volt 20AH high output

• AGM batteries

• Built-in, CEC compliant, 1 amp internal charger

•

•

•

•

12V power outlet

Work light and flasher

Battery charging status

Professional quality

• 2 gauge 62" 100% copper cables • Unit will not operate if polarity or voltage is set incorrectly

• Digital battery voltage gauge reads internal and external • USB power outlet

ORDER NO.

Mfr. No. Description Gauge Starting Current Peak Current

366-04063 604063-001 12 /24 Volt 2 700 Amp 4000 Amp - 12V

1800 Amp - 24V

For more information see www.quickcable.com

TUNE UP & REPAIR

What better aid for the professional technician and shop than complete and total access to our entire database of repair and service information.

SELOC PRO

Seloc Pro is a mechanical repair database that is accessed via the internet. Marine Repair Shops have access to complete maintenance and repair sections, Quick access buttons to Maintenance Schedules, Wiring Diagrams, Specification Charts, Aftermarket Parts Database, Flat Rate Time

(freshwater and saltwater) and a search engine hyper-linked index.

Manufacturers covered include Chrysler, Force, Honda, Johnson, Evinrude, Mercruiser, Mercury, Mariner, Nissan, OMC, Suzuki, Tohatsu,

Volvo, Yamaha, and Yanmar Engines with coverage dating from mid 50's forward to 2012. We have recently added coverage of Sea-Doo and

Yamaha 4-Stroke PWC models through 2011.

With Seloc Pro you will find each mfg. information organized the same way, our procedures can be accessed in less than a minute, and the average length of those procedures are 1 – 3 pages. A new feature added is a parts and labor estimating tool, along with an ever-growing

OEM parts database.


019-50050 5505 Seloc Pro, Annual Subscription

(Unlimited Access 1 Year)

For more information see www.selocmarine.com

80


MOTOR FLUSHERS & ACCESSORIES

PRO MOTOR FLUSHER

For Inboard Applications

• Easy to install in seconds for out of the water engine flushing applications

• Designed to fit inboards, performance ski boats and all boats with a tear drop shaped slotted thru hull water intake

• Stainless steel T fitting slides into the intake slot in either direction for a quick fit

• Flusher is supported with 360˚ plastic support ring insuring a tight fit to the bottom of the boat

• No more trying to fit between the trailer bunks and secure a pole to the ground

• A quick couple of turns of the locking nut and the flusher is fully secure and ready to use

DRIP TRAY

For Inboard Applications

• Tough, rugged HDPE

• Catches oil, fluids under any engine or lower unit

• Prevents spills onto the ground

• Ideal tray for wet gear

Dimensions: 37.5" x 25.0" (95cm x 64cm)

For more information see: www.sceptermarine.com

SHOP SUPPLIES

PERMATEX® LOW STRENGTH

THEADLOCKER PURPLE

Designed for fasteners under 1/4" (6mm) that require occasional adjustment. Removable with hand tools for easy assembly. Set screws, headlamp screws, carburetors, relay locks, throttle body assembly, choke assembly, fuel injection set scews, body panel mounting screws

& any small screw assembly. Protects against corrosion & prevents vibration loosening. Size: 6 ml

(Replaces 814-22200)

For more information see: www.permatex.com

ORDER NO.

Mfr. No.

615-10041 10041

ORDER NO.

Mfr. No.

080-06951 06951

ORDER NO.

Mfr. No.

814-24024 24024

551-00334-V

551-00334-M

551-00334-S

REPLACEMENT ADAPTERS

FOR GEARCASE FILLER


551-00334-V 551-334V Adapter, Volvo

551-00334-M 551-334M Adapter, Metric

551-00334-S 551-334S Adapter, Suzuki

For more information see www.cdielectronics.com

3M™ SCOTCH-WELD™

NITRILE HIGH PERFORMANCE

RUBBER & GASKET ADHESIVE

• Quick drying and flexible with fuel & oil resistance

• Heat & solvent reactivatable

• Curable with heat

• Bonding, adhering, gluing, joining & attaching

Consistency: Medium liquid

Bonding Range: Up to 15 minutes

Colour: Brown

ORDER NO. 600-00847

Mfr. No. 847-5OZ Size: 5 oz.Tube


81

TRAILERING & BOAT CARPET

TRAILER ACCESSORIES

TONGUE JACK - 6430


• 8" slotted wheel for added maneuverability

• 1/2" swivel pin

• Zinc TUFFPLATE finish

• Jack rotates easily to horizontal towing position & locks into place

• Fits trailer tongues up to 3" x 5"

Mfr. No. 22359

ORDER NO. 106-64300

6430

For more information see www.dutton-lainson.com

XLT TONGUE JACK

XLT is stylized with ergonomic comfort like the F2® series.

• 5 pitch acme screw with corrosion-resistant finish

• 12" screw travel

• Improved corrosion-resistance with Sharkskin™ on exterior surfaces and ZMax™ clear zinc on acme screw

• Thermoplastic bushings on inner and outer tubes reduce

“tube drag” when raising and lowering

• Patented XP bolt-through swivel/mount system

• 1,500 lb.capacity with superior castering performance

Mfr. No. 141133

ORDER NO. 141-13300

F2 JACK ADAPTER PLATE

Upgrade your Fulton® center-bolt swivel mount jack to an F2® jack.

• Fits Fulton’s patented center-bolt design

– used on XP10 and XP15 weld-on jacks

• Installs easily – no drilling or welding

ORDER NO. 141-50032

Mfr. No. 500320

For more information see www.cequentgroup.com

ELIMINATOR VENTED DISC BRAKES

“Integral” one piece style vented rotor and aluminum caliper with automotive quality brake pads

• Lifetime ceramic pads with stainless steel backing plates.

• Distinctive 380 aluminum caliper with E-coat finish

• Vented rotor with GalvX finish

• Galvanized heavy duty mounting bracket included

• Stainless steel bleeder valves and slider pins

• Bimetal piston with Stainless Steel piston cup

• Aluminum caliper with raised ribs dissipates heat up to 5 times faster than cast iron calipers

• Precision bearings, seal and grease factory installed

• 2 kits required per axle


404-82113 82113 10" Eliminator 10" Disc Brakes

404-82100 82100 12" Eliminator 10" Disc Brakes

404-81251 81251 Replacement Ceramic Brake Pad Kit

New

Size

AXLE BRAKE LINE KITS

Add disc or drum brakes to your trailer. All hardware included, you supply the actuator and brakes. The “Add On” Axle Kit must be used with the Single Axle Kit. The Tandem Axle Kit combines both Single Axle and “Add On” Kits into one package.

ORDER NO.


404-80326 80326 Single Axle Brake Line Kit

404-80327 80327 "Add On" Axle Brake Line Kit

404-80328 80328 Tandem Axle Brake Line Kit

For more information see www.tiedown.com

82

TRAILERING & BOAT CARPET


TAIL LIGHT PROTECTORS

Added protection for fragile trailer tail lights. Mounts between the existing tail light mounting brackets and the lamp using the two lamp mounting studs. Mounting holes fit standard DOT brake/tail lamps.

No hardware required for installation.

ORDER NO. Mfr. No. Material Thickness

336-26051 26051A Alum Tread 0.080"

Lamp not included

LICENCE PLATE BRACKET

Upgrade the appearance of your trailer with an aluminum tread plate licence plate bracket.

Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing tail light mounting bracket and the left side tail light via the lamps two mounting studs.

ORDER NO. Mfr. No. Material Thickness

336-26053 26053A Alum Tread 0.080"

FRAME CLIPS

To Secure Trailer Wiring

All trailer light kits come with a few of these clips, but never enough to secure the wiring along the frame as frequently as you want. With a pack or two of these clips, you can secure your drooping trailer wiring.

• Zinc plated steel clips - 3/8" wide

• Grips edges up to 5/32" thick

For more information see www.cesmith.com

ORDER NO. 336-16867

Mfr. No. 16867A (10 per pack)

Lamp not included

PACKAGED HITCH BALLS

ORDER NO.

Mfr. No. Ball Shank Shank Drawbar GTW

Dia. Dia. Length Thickness GVWR

Range Rating

075-63880 63880 1-7/8" 3/4" 1-1/2" 3/8" - 5/8" 2,000

075-63884 63884 1-7/8" 1" 2-1/8" 3/8" - 3/4" 2,000

075-63887 63887 2" 3/4" 1-1/2" 3/8" - 5/8" 3,500

075-63908 63908 2-5/16" 1" 2-1/8" 3/8" - 3/4" 7,500

075-63909 63909 2" 1" 2-1/8" 3/8" - 3/4" 7,500

075-63894 63894 2-5/16" 1" 2-1/8" 3/8" - 3/4" 6,000

New

Size

J-PIN® ANTI-RATTLE PIN WITH BARREL LOCKSET

J-Pin® quickly and confidently secures ball mounts and other hitchmounted accessories, eliminating the sway and rattle caused by part clearance issues. J-Pin® ready receiver design allows for the most confident and secure hookup in today’s towing market by compressing the hitch-mounted accessory against the inner side wall of the hitch receiver tube. Once attached, the hitch and towing components seem virtually welded together. Packaged complete with its integral ball mount lock, J-

Pin® makes your towing system complete.

• For 2" receivers only

• Ideal for bike racks and hitch-mounted cargo carriers

• Attachment wrench included

• Requires hitch with additional 17/32" hole in receiver tube

• Convenient 1/4" turn key for ease of use

ORDER NO. 206-63201

Mfr. No. 63201

CLASS III INTERLOCK

TOWING STARTER KIT

• Includes 2" hitch ball

• Includes receiver lock

• Black powder coat finish over e-coat

• Fits 2" square receiver tube opening

Rating (lbs.) Length Rise Drop Secure

GTW/TW

6,000/600 8-1/2" 3/4" 2" Lock

ORDER NO. 075-80565

Mfr. No. 80565

For more information see www.cequentgroup.com

A C

STRAP GUARD

Injection Molded Nylon B


ORDER NO.

Mfr. No. A B C

427-56012 756012-1 6-1/4" 1-1/2" 9/16"

427-56020 756020-1 7" 2" 3/4"

Strap Guard 756012 fits 1-1/2" straps, Strap Guard 756020 fits

2" straps. Great for protecting your boat, Motorcycle or any vehicle.

83

MISCELLANEOUS

BOAT STANDS

STERN DRIVE INSTALLATION JACK

• Adjusts on 3 axes to make stern drive removal and installation an easy one man job

• Heavy-duty

• Features pneumatic wheels

• Coated surfaces to prevent scratching

• Rating: NMDA, NMMA, ABYC, ABBRA, BBB and Association of Marine Industries

• Weight: 165 lbs. (74 kg)

Mfr. No. SD3

ORDER NO. No. 758-00053

For more information see www.boatstands.com

BARBEQUE ACCESSORIES

BBQ VINYL COVERS

Cover your BBQ with a Dickinson cover to keep your BBQ looking it’s best.

ORDER NO.

Mfr. No. Fits Description

850-15169 15-169 Spitfire 180

850-15171 15-171 Spitfire 180

Royal Blue Vinyl

Black Vinyl

850-15170 15-170 Sea-B-Que-Round Black Vinyl

850-15182 15-182 Sea-B-Que-Small Royal Blue Vinyl

850-15185 15-185 Sea-B-Que-Small Black Vinyl

850-15183 15-183 Sea-B-Que-Large Royal Blue Vinyl

850-15184 15-184 Sea-B-Que-Large Black Vinyl

New

Size

New

Size

For more information see www.dickinsonmarine.com

BINOCULARS

MARINE BINOCULARS

Consumer’s Choice Water Resistant Optics

• Progressive Design

• Water Resistant

• Center Focus

• Bak 4 Prisms

• Retained Lens Caps

• Field View Angle: 6.6˚

• Field of View:116m/1000m

• Green Coated Lenses

• Includes case

Mfr. No. 11752

ORDER NO. 001-11752

Binoculars, 7 x 50

For more information see www.promariner.com

84


TRAILER PREMIUM GLYDE SLICKS

• Launch & load your boat with ease

• Eliminates friction between the bottom of the boat & the runners

• Easily insytalled on carpeted or bare bunks

• Evenly distribute the weight of the boat

• Ideal for all aluminum, fiberglass & wood boats up to 2000 lbs.

• Includes stainless steel screws and instructions

• Dimensions: 2'L x 1-1/2"W x 7/16" Thick

Mfr. No. P06-06W

ORDER NO. No. 305-06006


MISCELLANEOUS HARDWARE

OARLOCKS

Cast Brass

ORDER NO.

Mfr. No. TYPE A B

425-80610 (pr.) 580610-1 Side Mount 1/2" 3-3/4"

STANDARD COWL VENT/SNAP-ON DECK PLATE

Dip Molded PVC

ORDER NO. Mfr. No. Diameter Height Required Int. Colour

Hole Size

427-27147 727147-3 4" 9-1/4" 4-3/4" White

HEAVY DUTY UTILITY SNAP

Forged Steel

Electrogalvanized

ORDER NO. Mfr. No.

A B C B.S (Ib.)

421-55832-1 Pkg. 155832-1 4-1/4" 11/16" 3/4" 7,000

SNAP HANDLE

DRAIN PLUG POP DISPLAY

Stamped Aluminum

Fits 1" Drain Tube

ORDER NO.

Mfr. No. A

425-20077 520077-5 1"

Sold As

POP Display Pk/20

Recommended for use with aluminum boats only.

GARBOARD DRAIN & PLUG

Injection Molded Nylon

DRINK HOLDER

PVC

MISCELLANEOUS

Note: Plug only

ORDER NO.

Mfr. No.

425-20056 520056-1 Replacement Plug (Pair) for 520055-1


ORDER NO.

Mfr. No. A B C

425-88115 588115-1 2-3/4"" 3-1/2" 4-5/8"

STAINLESS STEEL

4 PRONG LINE HOLDER

• Designed to bolt into place

• Stainless steel construction for the marine environment

• 5"H x 3"W x 16"L

ORDER NO. 960-01200 Mfr. No. 960012

For more information see: www.handimanmarine.com

85

MISCELLANEOUS

FUEL TREATMENT

STAR TRON® VERTICAL

SHOOTER DISPENSER

SMALL ENGINE FORMULA

• Holds (12) (14311C) Star Tron® 1 fl. oz. shooters

• 1 fl. oz. (30 ml) treats 6 gallons (23 litres) of fuel

• An ideal way for first-time users to experience Star Tron®

Mfr. No. 14312C

ORDER NO. 409-14312

STAR TRON® SUPER CONCENTRATE

SHOOTER DISPENSER

• Holds (16) (14501C) Star Tron® Super Concentrate Gas Additive,1 fl. oz.

• 1 fl. oz. (30 ml) treats 25 gallons (94.5 liters) of fuel

• An ideal way for first-time users to experience Star Tron®

• Attractive display

Mfr. No. 14316C

ORDER NO. 409-14516

For more information see www.starbrite.com

GOPRO CAMERA ACCESSORIES

GOPRO CAMERA

ADAPTER

Camera adapter compatible with GoPro Cameras and Shurhold Handles.

Extend the versatility of your camera by quickly and easily attaching it to any Shurhold handle.

• Capture underwater footage from inside the boat or on the dock

• Use to get above the crowd

• Use to capture moments of yourself scuba diving and more

• Set in rod holder for aerial view of all the fishing action

• Use to inspect under vessel or vehicle or other hard to reach areas

ORDER NO. 962-01040

Mfr. No. 104

86

For more information see www.shurhold.com

No results