Samsung HT-DS140 Instruction manual

9/15/04 6:09 PM
Page 3
DIGITAL HOME
THEATER SYSTEM
HT-DS140
Instruction Manual
OPEN/CLOSE
DVD
DIMMER
REMAIN
TUNER
BAND
EZ VIEW
SLOW
MO/ST
STEP
DSP/EQ
AUX
SUB TITLE
REPEAT
TUNING
VOLUME
PL II
MODE
PL II
EFFECT
INFO
MENU
E
MUT
RETU
RN
1p~36p(DS140)-Sea
ENTER
TEST TONE
SOUND EDIT
TUNER
MEMORY
P.SCAN
SLEEP
CANCEL
LOGO
SLIDE MODE DIGEST
ZOOM
COMPACT
VIDEO
DIGITAL AUDIO
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 4
Safety Warnings
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 5
Precautions
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 6
Safety Instructions
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the appliance is operated.
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near waterforexample, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been
followed.
POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
3
CLEANING
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from
battery power, or other sources, refer
to the operating instructions.
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 7
POLARIZATION
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
OUTDOOR ANTENNA GROUNDING
•If an outside antenna is connected to the
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
In
• the U.S.A section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
ATTACHMENTS
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
SERVICING
•Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer
all servicing to qualified service personnel.
•
REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SAFETY CHECK
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
c. If the video product has been exposed to rain
or water
d. If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
HEAT
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.
4
PREPARATION
POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 8
Features
Multi-Disc Playback & AM/FM Tuner
The HT-DS140 combines the convenience of multi-disc playback capability,
including DVD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a sophisticated
AM/FM tuner, all in a single player.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology that
improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater
Systems Inc. It delivers full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-DS140 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The HT-DS140 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The HT-DS140 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The HT-DS140 allows you to select your favorite image during JPEG,
DVD playback and set it as your background wallpaper.
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to
create the entire picture (odd scan lines, then even scan lines), Progressive Scan
uses one field of information (all lines displayed in one pass) to create a clear and
detailed picture without visible scan lines.
5
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 9
Contents
PREPARATION
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Safety Instructions ..............................................................................................................................................................3
Features..............................................................................................................................................................................5
Notes on Discs....................................................................................................................................................................7
Description ..........................................................................................................................................................................9
CONNECTIONS
Connecting the Speakers....................................................................................................................................................13
Connecting the Video Out to TV .........................................................................................................................................15
P.SCAN(Progressive Scan) Function .................................................................................................................................16
Connecting External Components ......................................................................................................................................17
Connecting the Antennas....................................................................................................................................................19
OPERATION
Disc Playback .....................................................................................................................................................................21
MP3-CD Playback...............................................................................................................................................................22
JPEG File Playback ............................................................................................................................................................23
Displaying Disc Information ................................................................................................................................................25
Checking the Remaining Time............................................................................................................................................26
Fast/Slow Playback.............................................................................................................................................................27
Skipping Scenes/Songs ......................................................................................................................................................28
Repeat Playback.................................................................................................................................................................29
A-B Repeat Playback..........................................................................................................................................................30
Angle Function ....................................................................................................................................................................31
Zoom Function ....................................................................................................................................................................32
Selecting Audio/Subtitle Language .....................................................................................................................................33
Moving Directly to a Scene/Song........................................................................................................................................34
Using Disc Menu.................................................................................................................................................................35
Using the Title Menu ...........................................................................................................................................................36
SETUP
Setting the Language..........................................................................................................................................................37
Setting TV Screen type .......................................................................................................................................................39
Setting Parental Controls (Rating Level).............................................................................................................................41
Setting the Password ..........................................................................................................................................................43
Setting the Wallpaper..........................................................................................................................................................45
Setting the Speaker Mode ..................................................................................................................................................47
Setting the Test Tone..........................................................................................................................................................48
Setting the Delay Time........................................................................................................................................................49
Setting the Audio Quality ....................................................................................................................................................51
Setting the DRC (Dynamic Range Compression)...............................................................................................................53
Sound Field (DSP)/EQ Function .........................................................................................................................................54
Dolby Pro Logic II Mode......................................................................................................................................................55
Dolby Pro Logic II Effect .....................................................................................................................................................56
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................57
Presetting Stations..............................................................................................................................................................58
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................59
Before Calling for Service ...................................................................................................................................................61
Cautions on Handling and Storing Discs ............................................................................................................................63
Specifications......................................................................................................................................................................64
Notes on Terminology.........................................................................................................................................................65
Warranty .............................................................................................................................................................................66
6
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 10
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
5"
Audio + Video
DVD
3 1/2"
VIDEO
AUDIO-CD
COMPACT
Audio
DIGITAL AUDIO
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5"
74 min.
3 1/2"
20 min.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
7
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 11
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
8
PREPARATION
Disc Recording Format
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 12
Description
—Front Panel—
Play/Pause (
Power (
) button
Stop ( ) button
) button
Function button
Open/Close button
Volume control
Standby indicator
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
Disc Tray
DOLBY DIGITAL indicator
LINEAR PCM indicator
DSP indicator
CHAPTER indicator
STEREO indicator
PROGRAM indicator
TUNER indicator
TITLE indicator
LINEAR PCM
L
C
DSP
TITLE
CHAP
PRGM
S
kHz
MHz
MPEG
RS
DTS Disc indicator
MPEG indicator
PRO LOGIC indicator
SPEAKER indicator
9
TUNED
R
SW
LS
ST
System Status Display
RADIO FREQUENCY
indicator
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 13
Video Output Connector
Connect the TV's video input connectors
(VIDEO IN) to the VIDEO OUT connector.
S-Video Output Connector
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output connector.
External Digital Optical Input Connector
Use this to connect external equipment capable of digital output.
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
SUBWOOFER
REAR
L
FRONT
L
REAR
R
FRONT
R
External Audio
Input Connector
5.1 Channel Speaker
Output Terminals
FM Antenna
Connector
Component Video
Output Connectors
AM Antenna
Connector
Connect a TV with component video
inputs to these connectors.
Accessories
E
LOS
N/C
OPE
EZ
R
ME
DIM
DVD
SUB
/EQ
DSP
X
AU
W
SLO /ST
MO
AIN
REM
P
STE
ER
TUN D
BAN
W
VIE
E
TITL
EAT
REP
E
LUM
VO
II
PL
DE
MO
ING
TUN
RETURN
MENU
II
PL
ECT
EFF
INFO
MUTE
ER
ENT
P
SLEE
TEST
O
LOG
M
ZOO
EST
DIG
ER
TUN ORYAN
MEMP.SC
EDIT
CEL
CAN
DE
E MO
SLID
ND
SOU
E
TON
Remote Control
(AH59-01323C)
AM Antenna
(AH42-20001P)
Speaker Cables
(AH81-01542F)
Audio Cable
(AH39-40001U)
Video Cable
(AH39-40001V)
FM Antenna
(AH42-00004A)
User's Manual
(AH68-01489W)
10
PREPARATION
—Rear Panel—
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 14
Description
—Remote Control—
TV, DVD POWER button
DIMMER button
OPEN/CLOSE button
REMAIN button
OPEN/CLOSE
DIMMER
REMAIN
DVD
TUNER
BAND
AUX
EZ VIEW
SLOW
MO/ST
SUB TITLE
STEP
DSP/EQ
REPEAT
DVD button
EZ VIEW button
STEP button
DSP/EQ button
AUX button
TUNER BAND button
SUB TITLE button
SLOW, MO/ST button
REPEAT button
Play/Pause button
PL II
MODE
PL II
EFFECT
PL II MODE button
INFO
U
MEN
INFO button
E
UT
M
RE
TU
RN
MENU button
ENTER
TUNER
MEMORY
11
TEST TONE button
SOUND EDIT
Number(0~9) buttons
SLIDE MODE button
MUTE button
Direction/Enter button
TEST TONE
SLEEP button
LOGO COPY button
Tuning Preset/CD Skip button
PL II EFFECT button
TUNING button
VOLUME button
RETURN button
Stop button
TUNING
VOLUME
SLEEP
CANCEL
LOGO
SLIDE MODE DIGEST
SOUND EDIT button
TUNER MEMORY, P.SCAN button
ZOOM
ZOOM button
CANCEL button
DIGEST button
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 15
PREPARATION
Insert Remote Batteries
1
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking batteries:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
12
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 16
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
SW
L
LS
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
R
RS
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times
the distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers so they face each other.
• Place them about 60 to 90cm (2 to 3 feet) above your ear, facing slightly
downward.
the front and center speakers, the rear speakers are used to
* Unlike
mainly handle sound effects and sound will not come from them all
the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
13
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 17
CONNECTIONS
Rear Speaker (L)
Front Speaker (L)
Center Speaker
Blue
White
Green
Subwoofer
Purple
Gray
Red
Front Speaker (R)
Rear Speaker (R)
Back of the Speakers
1 Press down the terminal 2 Insert the wire into the
tab on the back of the
speaker.
terminal and release the
terminal tab.
• Insert the black wire into the black
•
Back of the Main Unit
3 Connect the connecting plugs (6)
to the back of the DVD player.
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
(–) terminal and the gray wire into
the gray (+) terminal.
Make sure the polarities (+ and –)
are correct.
Black
Gray
14
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 18
Connecting the Video Out to TV
TV
Composite
Video
*
S-Video
Component
Video
Depending on your TV, Component Video input jacks may be marked as DVD Video input.
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 16 to select Progressive Scan.
15
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 19
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
Press STOP button.
• When disc is played back, press the STOP button twice so that “STOP”, appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively.
• When you select P.SCAN, "P.SCAN" will appear on the display
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
• "NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
16
CONNECTIONS
1
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 20
Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Optical Cable
(not included)
DIGITAL OUT
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
2
Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX ➝ FM ➝ AM.
17
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 21
Connecting an External Analog Component
CONNECTIONS
Example: Analog signal components such as a VCR or TV.
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
R
L
AUDIO OUT
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
2
Press AUX on the remote control to select AUX.
• Be sure to match connector colors.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX ➝ FM ➝ AM.
18
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 22
Connecting the Antennas
FM antenna connection
FM Antenna (supplied)
1
2
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a
temporary measure.
Slowly move the antenna wire around until you find a location where reception
is good, then fasten it to a wall or other rigid surface.
19
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 23
AM antenna connection
1
2
3
CONNECTIONS
If AM reception is poor, connect an outdoor
AM antenna(not supplied).
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
1
2
Connect the AM loop antenna supplied to the AM and
If reception is poor, connect an outdoor single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna connected).
Cooling Fan
IMPEDANCE SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER
terminals.
REAR
L
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
FRONT
L
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
SUBWOOFER
REAR
R
FRONT
R
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
20
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 24
Disc Playback
1
Press OPEN/CLOSE button to
open the disc tray.
2
Load a disc.
• Place a disc gently into the tray with the
disc’s label facing up.
3
Press OPEN/CLOSE button
to close the disc tray.
DVD
CD
• Playback starts automatically.
Note
• Depending on the content of the disc, the initial screen may appear different.
To stop playback,
press STOP during playback.
To temporarily pause playback,
press PLAY/PAUSE during playback.
• If pressed once, “PRESS PLAY” is displayed and the
• To resume playback, press PLAY/PAUSE (
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
button again.
TV Broadcast System
• This device is designed to work with the NTSC video format.
• For normal playback, the video format a DVD disc is recorded in must coincide with your TV's video format.
21
)
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 25
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
MP3
1
Press the
OPEN/CLOSE
button to open the
disc tray, and then
load the MP3 disc.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear
and playback will start.
• Depending on the MP3 disc, the
appearance of the menu may be
different.
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
22
OPERATION
2
In Stop mode, use
to select the
album, and then press
the ENTER button.
Use
to select the
desired track, then
press ENTER or PLAY
to play the track.
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 26
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Slide Mode
1
Place the JPEG disc on the disc tray.
2
Press the OPEN/CLOSE button.
• Playback starts automatically.
• Each image is shown for 5 seconds before another image is displayed.
3
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
From top to bottom
From bottom to top
Rectangular shape in the center
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
Cancels the slide mode.
23
Press
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 27
Digest Function
You can view 9 JPEG images on the TV screen.
1
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
• The selected image is played for 5 seconds before moving to
9 windows.
the next image.
OPERATION
To view the previous or next image with 9 windows, press
.
Rotate/Flip Function
Press Cursor
,
,
,
buttons during playback.
button: Flip Vertically
button: Rotate 90°
Counterclockwise
button: Rotate 90° Clockwise
Original Image
button: Flip Horizontally
24
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 28
Displaying Disc Information
You can view disc playback information on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as follows:
DVD
CD
MP3
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
The information display
disappears from the screen
The information display
disappears from the screen
•
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Note
• What is a Title?
• Depending on the disc, the disc
•
The information display
disappears from the screen
A movie contained in a DVD disc.
information display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• What is a Track (File)?
A section of video or a music file recorded on a CD, or MP3-CD.
Screen Display
DVD display
TITLE display
REPEAT PLAYBACK display
AUDIO LANGUAGE display
DOLBY DIGITAL display
CD display
CHAPTER display
ELAPSED TIME display
SUBTITLE display
ANGLE display
MP3 CD display
TRACK (FILE) display
25
STEREO (L/R) display
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 29
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed
DVD
CD
TITLE ELAPSED
TRACK ELAPSED
TITLE REMAIN
TRACK REMAIN
CHAPTER ELAPSED
TOTAL ELAPSED
CHAPTER REMAIN
TOTAL REMAIN
MP3
TRACK REMAIN
TRACK ELAPSED
Note
• Press the INFO button twice to remove the display menu.
26
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 30
Fast/Slow Playback
Fast Playback
Press and hold
DVD
.
• Each time the button is held down during playback,
the playback speed changes as follows:
Slow Playback
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
27
CD
MP3
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 31
Skipping Scenes/Songs
DVD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track, or
directory (file) will be played.
DVD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
DVD RECEIVER
OPERATION
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
Playing Frame by Frame
DVD
Press STEP button.
• The picture moves forward one frame each time the
button is pressed during playback.
Press play to resume normal playback.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
28
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 32
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DVD
MP3
JPEG
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
RANDOM
Plays tracks in random order.
(A track that has already been played may
be played again.)
TRACK
Repeatedly plays the selected track.
DIR
Repeatedly plays all tracks in the selected
folder.
CD
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
To Select a Repeat Playback Mode in the Disc Information Screen
29
1
2
Press INFO button twice.
3
Press Cursor button
to select the desired
Repeat Playback mode.
4
Press ENTER button.
DVD
Press Cursor button to
move to REPEAT
PLAYBACK ( ) display.
CD
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 33
A-B Repeat Playback
DVD
1
CD
Press INFO button
twice.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
4
Press ENTER
button at the end
of the desired
segment.
• For a CD, press INFO button
once.
• When ENTER button is pressed,
the selected position will be stored in
memory.
OPERATION
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
• The specified segment will be played
repeatedly.
A-
A-B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
30
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 34
Angle Function
This function allows you to view the same scene in different angles.
DVD
1
Press INFO button.
2
Press Cursor
button to move to
ANGLE ( )
display.
1/3
3
1/3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
Note
31
• The Angle function works only with discs on which multiple angles have been recorded.
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 35
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to
enlarge.
DVD
3
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
OPERATION
Aspect Ratio
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
32
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 36
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button
twice.
2
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
Subtitle Language Selection Function
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
2
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
OFF
SP 02/ 03
FR 03/ 03
Note
• You can use the SUBTITLE
OFF / 03
33
•
button on the remote control to
select a subtitle language.
Depending on the disc, the
Subtitle and Audio Language
functions may not work.
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 37
Moving Directly to a Scene/Song
DVD
1
CD
Moving to a Title/Track
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor , buttons
or numeric buttons to select
the desired chapter and then
press ENTER button.
01/05
MP3
025/040
0:00:01
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
03/05
001/002
0:00:01
3
01/05
1/1
Moving to a Specific Time
5
1/1
025/040
1:17:30
001/040
0:00:01
1/1
Moving to a Specific Time
Press Cursor ,
buttons to move to
time display.
01/05
Press Cursor ,
buttons to move to
Chapter ( ) display.
6
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
Note
• You can press
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
from the disc information screen.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
34
OPERATION
Moving to a Chapter
4
2
Moving to a Chapter
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 38
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
In Play mode,
press MENU
button.
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
3
35
Press Cursor , ,
, buttons to
select the desired
item.
4
Press ENTER
button.
1p~36p(DS140)-Sea
9/15/04 6:10 PM
Page 39
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
OPERATION
Press MENU button to exit the setup screen.
36
37P~66P(DS140)-Sea
9/15/04 6:11 PM
Page 38
Setting the Language
OSD language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
37
37P~66P(DS140)-Sea
3
9/15/04 6:12 PM
Press ENTER
button.
Page 39
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
SETUP
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
38
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 40
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
In Stop mode,
press MENU
button.
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
be taken to the previous screen.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
39
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 41
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a widescreen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
•You can enjoy the widescreen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
•Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
SETUP
4:3PS
(4:3 Pan&Scan)
•You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
40
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 42
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
41
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
37P~66P(DS140)-Sea
3
9/15/04 6:12 PM
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
Page 43
4
Press Cursor ,
buttons to select the
desired rating level and
then press ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
SETUP
Note
• This function works only if a DVD disc contains rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
42
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 44
Setting the Password
You can set the password for the Parental (rating level) setting.
1
Note
43
Press MENU button.
2
• The password is set to "7890" by default.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
37P~66P(DS140)-Sea
3
9/15/04 6:12 PM
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
Page 45
4
Press ENTER
button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
44
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 46
Setting the Wallpaper
JPEG
DVD
While watching a DVD or JPEG, CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
2
Press LOGO
button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• The selected wallpaper will be
displayed.
4
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Select this to set the
Samsung Logo image as
your wallpaper.
45
Press OPEN/
CLOSE to close
the disc tray.
Select this to set the desired
image as your wallpaper.
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 47
To Change the Wallpaper
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
SETUP
1
In Stop mode,
press MENU
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
46
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 48
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will be automatically adjusted
according to your speaker configuration and whether certain speakers are used or not.
1
In Stop mode,
press MENU
button.
3
In the Speaker
Setup, press the
ENTER button again.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
47
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 49
Setting the Test Tone
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
48
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 50
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center and Surround Speakers.
Note
• With
•
49
(Dolby Pro Logic II), the delay time may be different for each
mode.
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
37P~66P(DS140)-Sea
3
9/15/04 6:12 PM
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
Page 51
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0 inch
13.6 inches
27.2 inches
40.8 inches
4.5 feet
5.6 feet
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0 inch
40.8 inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
50
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 52
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
1
In Stop mode,
press MENU
button.
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
4
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
51
37P~66P(DS140)-Sea
Method 2
9/15/04 6:12 PM
When manually adjusting with the SOUND EDIT button
Adjusting Front Speaker Balance
1
TITLE
Page 53
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
TUNED
Adjusting Rear Speaker Balance
2
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
kHz
MHz
Adjusting Rear Speaker Level
TITLE
CHAP PRGM RDS RT
ST
TUNED
3
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TITLE
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
TUNED
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
ST
TUNED
kHz
MHz
Note
• The adjustments will appear on the main unit, not on your TV screen.
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
52
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 54
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
3
In Stop mode, press
MENU button.
Press Cursor button to
move to ‘DRC’ and then
press ENTER button.
2
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
4
Press Cursor ,
adjust the ‘DRC’.
to
• Pressing the Cursor
button increases the
compression, and pressing the Cursor
reduces it.
Press RETURN button to return to the previous level.
53
Press MENU button to exit the setup screen.
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 55
Sound Field (DSP)/EQ Function
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
Press DSP/EQ button.
• "DSP" appears on the display panel.
• Each time the button is pressed, the selection changes as follows:
SETUP
Note
• This feature works with CDs, MP3-CDs and 2 channel DVD-Audio
and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
54
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 56
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers,
while using just the front left and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
55
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 57
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
Press
PL II MODE
button to select ‘MUSIC’
mode.
1
Press the PLII EFFECT
button to select Panorama.
Then press the Cursor ,
buttons to select the desired
effect setting.
2
• You can select either 0 or 1.
LINEAR PCM
L
C
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
TUNED
LINEAR PCM
R
SW
RS
L
CMX
MPEG-2 AAC MPEG
kHz
MHz
LS
LINEAR PCM
C
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
RS
RS
4
LINEAR PCM
L
CMX
MPEG-2 AAC MPEG
Note
ST
TUNED
kHz
MHz
Press the
PLII EFFECT
button to select Dimension.
Then press the Cursor ,
buttons to select the desired
effect setting.
TUNED
R
SW
TA
CMX
MPEG-2 AAC MPEG
• You can select between 0 and 6.
• You can select between 0 and 7.
L
DSP TITLE PBC CHAP PRGM RDS RT
R
kHz
MHz
C
LS
DSP TITLE PBC CHAP PRGM RDS RT
TA
ST
TUNED
R
SW
RS
CMX
MPEG-2 AAC MPEG
kHz
MHz
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
56
SETUP
Press the
PLII EFFECT
button to select C-Width. Then
press the Cursor , buttons
to select the desired effect
setting.
3
C
SW
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 58
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
1
2
Press TUNER/
BAND button.
Tune in to the
desired station.
Automatic Tuning 1
• The selection toggles back
and forth between "FM" and
"AM" each time the
TUNER(BAND) button is
pressed.
Automatic Tuning 2
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM, AM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
57
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 59
Presetting Stations
You can store up to:
•15 FM stations
•15 AM stations
• FM
• AM
Frequency Modulation
Medium Wave
Example: Presetting FM 89.1 in the memory
1
Press the
TUNER(BAND)
button and select
the FM band.
• Each time the button is pressed,
the band switches between
"FM" and "AM".
TITLE
CHAP PRGM RDS RT
ST
2
• Refer to Step 2 on page 57 to
Press the TUNER
MEMORY button.
• “PRGM” flashes in the display.
automatically or manually tune in
to a station.
TUNED
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
4
3
Press
to
select "89.10".
Press
to select a preset
number.
5
RDS RT
ST
TUNED
kHz
MHz
kHz
MHz
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
RADIO OPERATION
• You can select between 1 and
TITLE
TUNED
‘PRGM’ disappears from the display.
15.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
TITLE
RDS RT
ST
TUNED
TITLE
CHAP
RDS RT
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
ST
TUNED
kHz
MHz
on the
58
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 60
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• "SLEEP" will be displayed. Each time the button is pressed,
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
59
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 61
Adjusting Display Brightness
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
Press DIMMER button.
• Each time the button is pressed, the brightness changes as
follows: SLIGHTLY DARK ➞ DARK ➞ BRIGHT.
Mute Function
This is useful when answering the door or a
telephone call.
Press MUTE button.
MISCELLANEOUS
• ‘MUTE’ flashes in the display.
• To switch the sound back on (at the same volume as
before), press MUTE again or the VOLUME buttons.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
60
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 62
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Is the region code of the disc "1" or "ALL"?
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
•
player.
Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all six.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
61
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there a "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
•
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Page 63
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
The remote control does not • Is the remote control being operated within its operation range of
angle and distance?
work.
• Are the batteries exhausted?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them, and depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
a strange noise is heard.)
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
62
MISCELLANEOUS
• The DVD player is not
working normally.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 64
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Caution
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
63
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 65
Specifications
G
E
N
E
R
A
L
T
F U
N
M E
R
T
A U
N
M E
R
V
I
D
E
O
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
Component Video
S-VIDEO
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weight
10% ~ 75%
10 dB
60 dB
0.5%
54 dB
40 dB
2%
1.0 Vp-p(75 Ω load)
Y:1.0 Vp-p(75 Ω load)
Pr:0.70 Vp-p(75 Ω load)
Pb:0.70 Vp-p(75 Ω load)
Luminance Signal: 1.0Vp-p(75 Ω load)
Color Signal: 0.286 Vp-p(75 Ω load)
40 W(6 Ω)/ CH
40 W(6 Ω)
40 W(6 Ω)/ CH
55 W(3 Ω)
20 Hz~20 kHz
75 dB
50 dB
(AUX)500 mV
5.1ch speaker system
Front/Center/Rear speaker
Subwoofer speaker
6Ω x 5
3Ω
150Hz~20kHz
30 Hz~150 Hz
85 dB/W/M
86 dB/W/M
40 W
55 W
80 W
110 W
3.3 x 45.2 x 3.7 inches
Front
Center / Rear 3.3 x 3.7 x 3.7 inches 5.1 x 12.6 x 13.2 inches
Front
3.5 Ibs
Center/ Rear 0.7 Ibs
9.5 Ibs
64
MISCELLANEOUS
S
P
E
A
K
E
R
S
110 W
13.7 Ibs
14.2 x 2.6 x 16.1 inches
41°F ~ 95°F
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 66
Notes on Terminology
ANGLE
CHAPTER
NUMBER
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
65
37P~66P(DS140)-Sea
9/15/04 6:12 PM
Page 67
SAMSUNG DVD PLAYER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
1-800-SAMSUNG (1-800-726-7864) and www.SAMSUNGUSA.com
66
MISCELLANEOUS
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
1p~36p(DS140)-Sea
9/15/04 6:09 PM
Page 2
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
AH68-01489W