User’s manual
Models:CS6319 /
CS6319-2
w w w.v tec h.c om / hk / tel
Table of Contents
1.
Important Safety InstructionS.........................................1
2.
SET UP THE TELEPHONE.............................................................3
3.
GET TO KNOW YOUR PHONE.......................................................7
4.
USE YOUR PHONE.........................................................................13
2.1
2.2
2.3
2.4
2.5
3.1
3.2
3.3
3.4
3.5
4.1
4.2
4.3
4.4
4.5
4.6 4.7
4.8
4.9
4.10
4.11
Package Contents.............................................................................3
Location.............................................................................................3
Connect the Base Station..................................................................4
Install and Charge the Handset Batteries..........................................5
Install the Charger (For CS6319-2)...................................................6
Overview of the Handset...................................................................7
Overview of the Base Station............................................................9
Handset LCD Display Icons and Symbols.........................................10
Menu Structure..................................................................................11
Text and Digit Entry Table..................................................................12
3.5.1
English Character Set........................................................12
Make a Call........................................................................................13
4.1.1
Preparatory Dialling............................................................13
4.1.2
Direct Dialling.....................................................................13
4.1.3
Call from the Phonebook....................................................13
4.1.4
Call from the Call Log.........................................................13
4.1.5
Call from the Redial List.....................................................13
4.1.6
Call Timer...........................................................................13
Answer a Call.....................................................................................14
End a Call..........................................................................................14
Adjust Earpiece and Speakerphone Volume.....................................14
Mute a Call.........................................................................................14
Silence a Ringing Handset Temporarily.............................................14
Redial the Last Number.....................................................................15
4.7.1
Redial a Number from the Redial List................................15
4.7.2
Store a Redial Number into the Contacts...........................15
4.7.3
Delete a Redial Number.....................................................15
4.7.4 Access the Redial List During a Call..................................15
Find the Handset...............................................................................15
Make an Internal Call.........................................................................16
4.9.1
Intercom Another Handset..................................................16
4.9.2
Transfer an External Call to Another Handset....................16
4.9.3
Make a 3-way Conference Call..........................................17
4.9.4
Answer an Incoming Call during an Intercom Call.............17
Call Waiting (Network Dependent).....................................................17
Clear Flashing Message Indicator.....................................................18
4.12
Power Fail Back-up Mode..................................................................18
4.12.1 Set Power Fail Back-up Mode............................................18
4.12.2 To activate Power Fail Back-up Mode................................19
4.12.3 Make a Call Using Power Fail Back-up Mode....................20
4.12.4 Answer a Call Using Power Fail Back-up mode.................20
5.PHONEBOOK .................................................................................21
5.1
5.2
5.3
5.4
6.
Add a New Contacts Entry ...............................................................21
View a Contacts Entry.......................................................................21
Dial a Contacts Entry.........................................................................21
5.3.1
Call from the Phonebook in Idle:........................................21
5.3.2
Call from the Phonebook during a Call...............................22
Delete a Contacts Entry.....................................................................22
CALLER DISPLAY...........................................................................23
6.1
6.2
6.3
6.4
6.5
View the Call Log...............................................................................23
Store a Call Log Number into the Contacts.......................................23
Delete an Entry in the Call Log..........................................................23
Delete the Entire List of the Call Log.................................................24
Call Log Display Screen Message.....................................................24
7.PHONE SETTINGS..........................................................................25
7.1
7.2
7.3
7.4
7.5
Clock Settings....................................................................................25
7.1.1
Change the Date Format....................................................25
7.1.2
Change the Time Format....................................................25
7.1.3
Set the Date and Time........................................................25
Handset Settings...............................................................................26
7.2.1
Set the Ringer Melody .......................................................26
7.2.2
Set the Ringer Volume.......................................................26
7.2.3
Set Key Tone......................................................................26
7.2.4
Select Base........................................................................26
7.2.5
Set the Auto Answer...........................................................27
Base Settings.....................................................................................27
7.3.1
Change the Flash Time......................................................27
7.3.2
Change the System PIN Code...........................................27
Registration........................................................................................28
7.4.1
Easy registration for additional handset.............................28
7.4.2
Register an additional handset through the menu..............28
7.4.3
De-register a Handset........................................................29
Reset Your Phone..............................................................................29
8.
DEFAULT SETTINGS......................................................................30
9.
TROUBLESHOOTING.....................................................................31
10. Technical Specifications......................................................34
11.cARE AND MAINTENANCE INSTRUCTIONS...............................35
1.
Important Safety InstructionS
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury, including the following:
1. Read and understand all the instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink,
swimming pool).
5. Do not expose the telephone to direct sunlight or extreme cold environment. Do
not put the telephone close to heating sources such as radiators, cookers, etc.
6. Do not overload wall outlets and extension cords as this can result in the risk of
fire or electric shock.
7. Unplug this product from the wall outlet and refer servicing to VTech under the
following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
8. Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
9. Do not use the telephone to report a gas leak in the vicinity of the leak.
10. Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities.
11. The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or unit damages. The
manufacturer will not be held liable for damage arising from such non-compliance.
12. Do not use third party charging bays. The batteries may be damaged.
13. Please note the correct polarity while inserting the batteries.
14. Do not immerse batteries in water, do not place in fire.
Disposal warning
1. When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products/battery should be disposed of
separately from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance/battery will help prevent potential
negative consequences for the environment and human health.
If you have questions about this product, or having difficulty with setup or operation,
call our Customer Service Centre.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCODRING TO THE
INSTRUCTIONS
2.
SET UP THE TELEPHONE
2.1Package Contents
The package contains the following items:
•
•
•
•
•
•
•
•
Handset(s) (1 for CS6319, 2 for CS6319-2)
1 Base unit
AC power adaptor(s) (1 for CS6319, 2 for CS6319-2)
1 Charger (for CS6319-2 only)
2 Telephone line cords
NiMH rechargeable battery pack (1 for CS6319, 2 for CS6319-2)
User’s Manual
Warranty Card
2.2Location
This telephone works by sending radio signals between the handset(s) and the base.
The maximum reception range between the base station and the handset(s) is up to
300 metres.
For maximum coverage and to reduce interference, here are some guidelines you
should consider when you place the base unit:
•
•
•
•
•
Place the telephone in reach of the power cable and the telephone cable
connecting the mains power socket and telephone socket (i.e. within 2 metres ).
When indoors, place it in a high, central and convenient location with no
obstruction in between the handset(s) and the base.
Place it away from electronic appliances such as televisions, microwave ovens,
radios, personal computers, wireless devices or other cordless phones.
Avoid facing radio frequency transmitters, such as external antennas of mobile
phone cell stations.
Avoid plugging it to the same circuit with other major household electrical
appliances to avoid potential interference. Use another power outlet for the base.
If the reception for the base unit is not satisfactory, move it to another location for
better reception.
Depends on surrounding conditions, as well as spatial and structural factors, the
range may vary. The reception range indoors is normally shorter than that outdoors.
2.3
Connect the Base Station
2. Plug the power adapter into a wall outlet which is not controlled by a wall switch.
3. Insert the other end of the telephone line cord into a telephone wall jack.
Note
Fed the cords through the slot on the edge of the base unit, so it sits flush with the
desk.
SET UP THE TELEPHONE
1. Insert the DC plug of the power adapter and the telephone line cord into the base
station accordingly, as shown above.
2.4
Install and Charge the Handset Batteries
1. Slide the battery compartment cover open.
2. Place the supplied rechargeable battery in the battery compartment and plug in
the battery connector.
3. Slide the battery compartment cover back.
4. Put the handset on the base or charger to charge for 16 hours before first time
usage. The Charging LED lights up, indicating that the handset is properly placed
on the base.
NOTES
1. Use only the supplied NiMH rechargeable batteries.
2. If you plan not to use the handset for a long time, disconnect and remove the
batteries to prevent possible leakage.
2.5
Install the Charger (For CS6319-2)
For users with CS6319-2, your product package comes with a charger.
2. Plug the other end into the mains power wall socket.
SET UP THE TELEPHONE
To install the charger:
1. Plug the mains power cable into the charger base.
3.
GET TO KNOW YOUR PHONE
3.1Overview of the Handset
1. EARPIECE
2. MENU / SELECT
In idle mode: Press to access the main menu.
During a call: Press to access intercom / phonebook / call log.
In menu / editing mode: Press to confirm and save settings.
In phonebook / call list entry: Press to edit the entry.
In redial list: Press twice to edit the entry.
3. UP / VOLUME + / PHONEBOOK
In menu mode: Press to scroll up the menu items.
In phonebook / redial list / call log: Press to scroll up the list.
In editing mode: Press to move the cursor to the right.
During a call: Press to increase volume.
4. SPEAKER
In idle / menu / pre-dial mode / during call: Press to turn the speakerphone on / off.
Call log / phonebook / redial list entry: Press to make a call with speakerphone.
During a call: Press to switch between the earpiece and speakerphone.
5. TALK OFF / CLEAR
During a call: Press to end a call and go back to idle screen.
In menu / editing mode: Press to go back to previous menu.
In menu / editing mode: Press and hold to go back to idle screen.
In pre-dial mode: Press to delete the last digit.
While the handset is ringing: Press to silence the ringer tone.
7. INTERCOM
In idle mode / during a call: Press to initiate an intercom call.
8. MICROPHONE
9. MUTE / REMOVE
In editing / pre-dial mode: Press to delete a character / digit.
In editing / pre-dial mode: Press and hold to delete all the characters / digits.
During a call: Press to mute / resume the microphone.
10.REDIAL / PAUSE
In idle mode: Press repeatedly to view the last 5 numbers dialled.
11.TALK ON / RECALL
During handset ringing: Press to answer a call.
In idle / menu / pre-dial mode / during a call: Press to make a call.
Call log / phonebook / redial list entry: Press to call the selected entry.
During a call: Press to access services provided by your telephone base, such as
call waiting.
12.DOWN / VOLUME / CALL LOG
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook / redial list / call log: Press to scroll down the list.
In editing mode: Press to move the cursor to the left.
During a call: Press to decrease volume.
13.CHARGE LED
On when the handset is charging in the telephone base or charger.
GET TO KNOW YOUR PHONE
6. ALPHANUMERIC KEYPAD, * (STAR), # (HASH)
In idle / pre-dial mode / during a call: Press to enter characters / numbers / * / #.
3.2Overview of the Base Station
1. CHARGING CRADLE
2. IN USE LIGHT
Steadily on when the handset is in use.
Flashes when there is an incoming call, or when the base is in registration mode
3. PAGE
Press
on the base station to page your handset(s).
Use during registration mode.
3.3
Handset LCD Display Icons and Symbols
The screen display gives you information on the current status of the telephone.
Steadily on when the ringer is switched off.
Steadily on when there is (are) new call(s) in the call log.
Steadily on when microphone is on mute during a call.
Steadily on when there is (are) new voicemail(s) from the
telephone provider.
Steadily on when the battery is fully charged.
Steadily on when the battery is 2/3 charged.
Steadily on when the battery is 1/3 charged.
Flashes when the battery level is low, indicating the handset
need to be charged.
Animates in cycle when the battery is charging.
In idle mode, the current time is displayed.
In call log review mode, the time of the call received is displayed.
In idle mode, the current date is displayed.
In call log mode, the date of the call received is displayed.
10
GET TO KNOW YOUR PHONE
Steadily on when the speakerphone is turned on.
3.4
Menu Structure
or
to access the phone menu, then press
In idle mode, press
navigate the menu. Please refer to the following for the menu structure.
to
/
Key Press
Main Menu
Phonebook
Call Log
Audio
Settings
Sub Menu
Review
Review
Ringer volume
Clr voicemail
Add contact
Del all calls
Ringer tone
Set date/time
Key tone
Time format
Date format
Auto answer
Select Base
Register
De-register
Power outage
Flash time
System PIN
Reset
11
3.5
Text and Digit Entry Table
The following table shows where each letter and punctuation can be found.
Respective character table will be used when the corresponding language is selected.
This is useful for storing a name in the Phonebook or renaming your handset(s).
In editing mode, a cursor indicates the current text entry position. It is positioned at
the right of the last character entered.
NOTES
1. Once a character is selected, the cursor will move to the next position after a short
pause.
2. You can move the cursor within the text by pressing
entry.
/
to amend the text
3.5.1English Character Set
Key
Alphanumeric Editing
Number
Editing
Key
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
11th
1
1
.
-
,
(
)
*
#
&
/
2
a
b
c
A
B
C
2
2
3
d
e
f
D
E
F
3
3
4
g
h
i
G
H
I
4
4
5
j
k
l
J
K
L
5
5
6
m
n
o
M
N
O
6
6
7
p
q
r
s
Q
Q
R
8
t
u
v
T
U
V
8
9
w
x
y
z
W
X
Y
0
space
0
Press
S
7
Z
9
1
7
8
9
0
12
GET TO KNOW YOUR PHONE
3. When entering a name in the phonebook, the first letter of each word will be
automatically capitalized.
4.
USE YOUR PHONE
4.1
Make a Call
4.1.1Preparatory Dialling
Enter the phone number and press
speakerphone.
4.1.2
to dial the number. Press
Direct Dialling
Press
to take the line and enter the phone number. Press
speakerphone.
4.1.3
to turn on the
to turn on the
Call from the Phonebook
1. Press
and then
/
to select Phonebook.
2. Press
and then
/
to scroll the desire entry.
Or
Search alphabetically using the keypad
3. Press
4.1.4
to dial the selected entry, press
to turn on the speakerphone.
Call from the Call Log
1. Press
and then
/
to select Call log.
2. Press
and then
/
to select the desired call log entry.
3. Press
4.1.5
to dial the selected call log entry, press
Call from the Redial List
1. Press
to access the redial list.
2. Press
/
or
repeatedly to select the desired redial number.
3. Press
to dial the selected redial number, press
speakerphone.
4.1.6
to turn on the speakerphone.
to turn on the
Call Timer
Your handset automatically times the duration of every call. The call timer will display
during your call and for a few seconds after the call is finished.
13
4.2Answer a Call
If the handset is not on the base station:
When the phone rings, press
speakerphone.
to answer a call, or press
to turn on the
If the handset is on the base station and if Auto answering is set to be ON:
When the phone rings, pick up the handset to answer a call.
4.3End a Call
During a call, press
to end the call.
OR
Put the handset on the base station to end the call.
For the earpiece, there are 5 volume levels to choose from. For the speakerphone,
there are 6 volume levels to choose from.
During a call:
Press
/
to adjust volume level.
Note
When the volume reaches the minimum or maximum setting, you will hear two beeps.
4.5
Mute a Call
With the call is muted, you can talk to someone nearby without the caller hearing you
during a call.
During a call:
Press
to mute the microphone and
caller cannot hear you.
will be displayed on the screen. Your
Press
again to resume the microphone. “Microphone on” will be displayed
temporarily on the handset screen.
4.6 Silence a Ringing Handset Temporarily
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next incoming call will ring normally at the original
volume.
Press
or
displayed.
when the handset is ringing. “Ringer muted” and
14
will be
USE YOUR PHONE
4.4Adjust Earpiece and Speakerphone Volume
4.7Redial the Last Number
You can redial up to 5 called numbers. If you have stored a name in the Phonebook
which matches with the number, the name will be displayed instead. The most recent
called number will display at the top of the redial list.
4.7.1Redial a Number from the Redial List
In idle mode:
1. Press
to access the redial list.
2. Press
/
3. Press
4.7.2
or
repeatedly to browse the redial list.
to dial the selected redial number.
Store a Redial Number into the Contacts
1. Follow Steps 1 and 2 in section 4.7.1.
2. Press
twice. The handset will show “Edit number”. Use the keypad to edit the
number, if necessary.
3. Press
The handset will display “Enter name”. Use the keypad to enter name.
4. Press
to confirm.
4.7.3
Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.7.1.
2. Press
to delete the number.
4.7.4 Access the Redial List During a Call
During a call:
1. Press
2. Press
/
or
repeatedly to access the desired redial number.
3. Press
to redial the number.
4. Press
to exit the redial list.
4.8Find the Handset
This feature helps you find the misplaced handset(s).
You can locate the handset(s) by pressing
on the base station. All the handsets
registered to the base will produce the paging tone and “**Paging**” will be displayed
on the screen. You press
/
or any dial pad key on any handset or press
on
the base again to stop paging.
NOTE
If the handset ringer volume is set to Off, the handset will still ring when being paged.
15
4.9
Make an Internal Call
This feature is only applicable when there are at least two registered handsets. It
allows you to make internal calls, transfer external calls from one handset to another
handset and make conference calls. If the called handset is not answered within 60
seconds, it will stop ringing and the calling handset will return to standby mode.
NOTE
If only one handset is registered to the base station, “Failed” will be displayed when
pressing
.
4.9.1
Intercom Another Handset
1. In idle mode, press
and “Intercom” will be displayed.
2. Enter the handset number you want to intercom with.
on the called handset to establish the internal
NOTE
If only two handsets are registered to the base station, press
handset immediately.
4.9.2
will call the other
Transfer an External Call to Another Handset
During an external call:
1. Press
to select Intercom.
2. Enter the handset number of the handset you want to intercom with.
3. The external call is put on hold automatically and the called handset rings.
4. Press
on the called handset to establish an internal call.
5. Press
on the calling handset or put the calling handset on the base station to
end the current call with the external party.
6. The external call is transferred to the called handset.
16
USE YOUR PHONE
3. The called handset rings. Press
call.
4.9.3
Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two handsets
(in intercom). The three parties can share the conversation and no network
subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.9.2
2. Press and hold
on the calling handset to establish the conference call.
NOTE
Hanging up any handset during a conference call will leave the other handset still in
connection with the external call.
4.9.4Answer an Incoming Call during an Intercom Call
When you receive an incoming call during an intercom call, you will hear an alert tone
and “Incoming call” will appear on the screens. The base and all the other handsets
will ring.
1. Press
to end the intercom call. Then press
to answer the incoming call.
2. Press
to end the intercom call without answering the incoming call. The
telephone will continue to ring.
4.10
Call Waiting (Network Dependent)
If you have subscribed the Call Waiting service from your telephone network provider,
you are able to answer another incoming call during an established call by putting
the first caller on hold. When there is an incoming call when you are already on the
phone, you will hear an alert tone.
1. Press and hold the
your second caller.
button. Your first caller is put on hold and you can talk to
2. To reestablish the original call, press and hold the
17
button again.
4.11
Clear Flashing Message Indicator
“New voicemail” and
will appear on the handset when you have new flashing
messages. After you have listened to all new flashing messages, the indicator on the
handset turns off automatically.
Use the clear voicemail feature when the telephone indicates that there is new
voicemail but actually there is none (for example, when you have accessed
your voicemail while away from home, or when you do not wish to listen to your
messages.) Clearing the flashing message indication only turns off the indicator, it
does not delete your messages. As long as you have new messages, your service
provider will continue to send the signal to turn on the indicators.
To manually turn off the new voicemail indicator, in idle mode:
, then
/
to select Settings
2. Press
, then
/
to select Clr voicemail
3. Press
.The handset will show “Turn off indicator?”.
4. Press
to confirm.
4.12Power Fail Back-up Mode
Power Fail Back-up system allows you to make calls during a mains power
interruption with your cordless phone. During a mains power interruption you can
supply the power stored in your handset battery to the base unit, so you can make
calls even when the power is out.
4.12.1
Set Power Fail Back-up Mode
In idle mode:
1. Press
, then
/
to select Settings
2. Press
, then
/
to select Power outage
3. Press
.then
/
to select Auto, Manual or Off.
4. Press
to confirm.
18
USE YOUR PHONE
1. Press
4.12.2
To activate Power Fail Back-up Mode
If Auto is selected:
1. During a mains power interruption, the handset will show “Place in cradle to pwr
up base“.
2. Place the handset onto the base unit to start up the base.
3. The handset will display “Power outage on don’t pick up“.
Or
1. If the handset is already on the base unit, it will automatically activate the Power
Fail Back-up mode and start up the base.
2. The handset will display “Power outage on don’t pick up”.
If Manual is selected:
1. During a mains power interruption, the handset will show “To pwr up base press
TALK OFF“.
2. Press
.
3. Place the handset onto the base unit to start up the base.
4. The handset will display “Power outage on don’t pick up”.
OR
1. If the handset is already on the base unit, just press
to start up the base.
2. The handset will display “Power outage on don’t pick up”.
NOTeS
• Power Fail Back-up mode will not work if the handset battery power is not
sufficient (i.e. lower than level 2).
• Do not pick up the power supplying handset from the base when Power Fail Backup mode is activated.
• Do not touch the charging contacts of the power supplying handset during Power
Fail Back-up mode.
• In Power failure back-up mode, none of the base functions will operate.
• It may take up to 90 seconds for the base and handset(s) to synchronise during
the power failure back-up activation process.
19
4.12.3
Make a Call Using Power Fail Back-up Mode
If there is only one registered handset:
1. Once the handset is placed onto the main base unit, enter the telephone number,
and then press
or
.
OR
Lift up the handset and enter the telephone number and place it back onto the
base unit within 60 seconds.
2. The speakerphone will automatically turn on and the call is made. The handset
may display “Please wait...“ while the handset starts up the base before dialling.
3. To end the call, press
.
If there is more than one registered handset:
The handset on the base unit should be left as a power supply of the base and you
can use the other handset(s) to make calls as normal.
4.12.4Answer a Call Using Power Fail Back-up mode
If there is only one registered handset:
1. When the phone rings, keep the handset on the base. Press
or
to answer
the call. The speakerphone will automatically turn on and the call is answered.
2. To end the call, press
.
If there is more than one registered handset:
The handset on the base unit should be left as a power supply of the base and you
can use the other handset(s) to receive calls as normal.
NoteS
• The handset should always remain on the base unit for the entire length of the
call.
• The range of the base unit is limited under the Power Fail Back-up mode. Keep
the handset close to the base unit.
20
USE YOUR PHONE
note
The handset should always remain on the base unit for the entire length of the call.
5.PHONEBOOK
Your phone can store up to 100 private contacts entries with names and numbers.
Each contacts entry can cover a phone number (maximum 24 digits) and a name
(maximum 15 characters).
5.1Add a New Contacts Entry
In idle:
1. Press
, then
/
to select Phonebook
2. Press
, then
/
to select Add contact
3. Press
. Enter number when “Enter number” is displayed.
4. Press
. Enter name when “Enter name” is displayed.
5. Press
to store the contacts entry.
5.2
View a Contacts Entry
In idle:
1. Press
The first entry in the Phonebook will be displayed.
2. Press
/
to browse the Phonebook entries.
OR
In idle:
1. Press
then
/
to select Phonebook.
2. Press
then
/
to select Review
3. Press
then
/
to browse the entries.
5.3
Dial a Contacts Entry
5.3.1
Call from the Phonebook in Idle:
In Idle:
1. Press
to access Phonebook
2. Press
/
3. Press
or
to select the desired contacts entry.
to dial.
OR
1. Search alphabetically using the keypad.
2. Press
or
to dial.
21
5.3.2
Call from the Phonebook during a Call
During a call:
1. Press
, then
/
to select Phonebook.
2. Press
, then
/
to access the desired number.
3. Press
4. Press
5.4
to dial the number
to exit Phonebook.
Delete a Contacts Entry
In idle:
1. Press
to access Phonebook.
2. Press
/
3. Press
The display will show “Delete contact?”.
4. Press
to confirm.
to select the desired contacts entry.
1. Search alphabetically using the keypad.
2. Press
The display will show “Delete contact?”.
3. Press
to confirm.
Note
Once an entry is deleted, it cannot be retrieved.
22
PHONEBOOK
OR
6.
CALLER DISPLAY
(NETWORK DEPENDENT)
This feature is available if you have subscribed to the Caller Line Identification service
from your network service provider. Your phone can store up to 10 received calls
with date / time information in the call log. The number will be shown on the screen
when the phone is ringing. If the number matches with one of the entries in your
Phonebook, the caller’s name stored in the Phonebook will be displayed alternatively
with the number. In standby, if three unanswered calls are received, “3 Missed call(s)” will be displayed.
6.1
View the Call Log
All received calls are saved in the call log with the latest call at the top of the list.
When the call log is full, the oldest call will be replaced by the latest call. Any
unanswered call unread is marked with
icon.
1. Press
to access the call log.
OR
1. Press
and
/
to select Call log.
2. Press
and
/
to select Review.
3. Press
and
/
to browse the entries.
6.2
Store a Call Log Number into the Contacts
1. Follow Steps 1 and 2 in Section 6.1.
2. Press
/
to select the desired entry.
3. Press
.The handset will show “Edit number”. Use the keypad to edit the
number, if necessary.
4. Press
The handset will display “Edit name”. Use the keypad to edit name
5. Press
to confirm.
6.3
Delete an Entry in the Call Log
1. Follow Steps 1 and 2 in Section 6.1.
2. Press
/
3. Press
to delete.
to select the desired entry.
23
6.4
Delete the Entire List of the Call Log
1. Press
and
/
to select Call log.
2. Press
and
/
to select Del all calls.
3. Press
.The handset will show “Delete all calls?”.
4. Press
to confirm.
6.5
Call Log Display Screen Message
Private
The caller is blocking the telephone number.
Unavailable
This caller’s number is unavailable.
24
CALLER DISPLAY (NETWORK DEPEENDENT)
The call list information might not be available for every incoming call. The callers
might intentionally block their names and / or telephone numbers.
7.PHONE SETTINGS
Your phone comes with a selection of settings that you can change to personalize
your phone the way you like it to work.
7.1
Clock Settings
You will need to set the correct date and time so that the call log records display the
correct date and time of received calls.
7.1.1
Change the Date Format
1. Press
and
/
to select Settings.
2. Press
and
/
to select Date format.
3. Press
and
MMDDYY).
/
to select your desired date format (DDMMYY or
4. Press
7.1.2
to confirm.
Change the Time Format
1. Press
and
/
to select Settings.
2. Press
and
/
to select Time format.
3. Press
and
24-HOUR.)
/
to select your desired date format (12-HOUR or 4. Press
7.1.3
to confirm.
Set the Date and Time
1. Press
and
/
to select Settings.
2. Press
and
/
to select Set date/time.
3. Press
then use the keypad to enter the date information. The date will be
shown in the format you set in section 7.1.1.
4. Press
then use the keypad to enter the time information. The time will be
shown in the format you set in section 7.1.2.
5. Press
to confirm.
25
7.2
Handset Settings
7.2.1
Set the Ringer Melody
You can set special melody to personalize your ringers.
1. Press
and
/
to select Audio.
2. Press
and
/
to select Ringer tone.
3. Press
and
/
to select your desired ringer tone.The respective ringer
melody will be played while you are browsing the melody list.
4. Press
to confirm.
7.2.2
Set the Ringer Volume
You can set the ringer volume level. A total of 6 ringer volume levels are provided for
your selection. You can also turn the ringer Off.
and
/
to select Audio.
2. Press
and
/
to select Ringer Volume.
3. Press
and
/
to select your desired ringer volume level or to turn the
ringer off. The respective ringer volume level will be played while you are browsing
the list, except when you turn the ringer off.
4. Press
7.2.3
to confirm.
Set Key Tone
A single beep is emitted when you press a key. You can turn on or off the key tone.
1. Press
and
/
to select Audio.
2. Press
and
/
to select Key tone.
3. Press
and
/
to select On or Off.
4. Press
to confirm.
7.2.4
Select Base
If you have registered the handset to more than one base, you can select any one of
them to use with your handset.
1. Press
and
/
to select Settings.
2. Press
and
/
to select Select base.
3. Press
and
/
to select your desired base station.
4. Press
to confirm.
26
PHONE SETTINGS
1. Press
7.2.5
Set the Auto Answer
If you turn on the Auto Answer, you can answer a call by lifting the handset from the
base station without pressing any key.
1. Press
and
/
to select Settings.
2. Press
and
/
to select Auto answer.
3. Press
and
/
to select On or Off.
4. Press
to confirm.
7.3Base Settings
7.3.1
Change the Flash Time
The default flash time is most suitable for your country and network operator. It is
unlikely that you would need to change this setting unless being advised to do so.
1. Press
and
/
to select Settings.
2. Press
and
/
to select Flash time.
3. Press
and
/
to select your desired flash time (Short, Medium, Long).
4. Press
to confirm.
7.3.2
Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorized use. The default system
PIN code is 0000.
1. Press
and
/
to select Settings.
2. Press
and
/
to select System PIN.
3. Press
and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.(Default 4-digit PIN is 0000)
5. Press
and enter the new system PIN.
6. Press
and enter the new system PIN again.
7. Press
to confirm.
NOTE
If the new PIN entered in Step 6 is not identical to the new system PIN entered in
Step 5, the user will be requested to enter the valid system PIN again in Step 5.
27
7.4Registration
Your handset and base station is already registered. You can add new handsets to
your telephone system, but each device must be registered with the telephone base
before use. To register a cordless handset to your CS6319/CS6319-2, there are two
options, either via the easy registration process or through the handset menu.
7.4.1Easy registration for additional handset
Before registration, make sure the handset is out of the telephone base or charger.
The screen displays “Register handset!”
1. Press and hold
on the telephone base until the IN USE LED flashes in red.
2. Put the handset you wish to register on the telephone base cradle. The handset
displays “Registering... Please wait”. It takes about 90 seconds to complete the
registration process.
Note
• Make sure the handset is put in the telephone base, not the charger.
• If registration fails, the system will automatically try to register again. If it fails after
the third try, the handset displays “Registration failed”. This may take up to 5 minutes to occur. Please start again from Step 1 above.
7.4.2
Register an additional handset through the menu
1. Press
then
/
to select Settings.
2. Press
then
/
to select Register.
3. Press
then enter the PIN (Default 4-digit PIN is 0000).
4. Press
. The display will show “Press and hold Page button”
5. Press and hold
on the base until the In Use LED flashes in red. The display
will show “Registering...Please wait”.
6. The display will show “Handset registered“ if the registration is successful
NOTE
If the base is not found, “No base found” will display.
28
PHONE SETTINGS
3. The screen displays “Handset registered” and you will hear a beep when the
registration is successful.
7.4.3
De-register a Handset
1. Press
then
/
to select Settings.
2. Press
then
/
to select De-register.
3. Press
then use the keypad to enter 4-digit PIN (default 4-digit PIN is 0000).
4. Press
then
5. Press
. The display will show “Deregister HANDSET X?”.
/
to select the handset you want to deregister.
6. Press
to confirm. If the handset is successfully deregistered, the display will
show “De-registered”.
Note
You cannot deregister the handset currently in use or deregister any handset if
another handset is in use.
7.5Reset Your Phone
You can reset your phone to the default settings. After reset, all your personal settings
and call log entries will be deleted, but your contacts list remains unchanged.
1. Press
then
/
to select Settings.
2. Press
then
/
to select Reset.
3. Press
then use the keypad to enter 4-digit PIN (default 4-digit PIN is 0000).
4. Press
. The display will show “Reset to default?”.
5. Press
to confirm.
Note
If you have multiple handsets, all the registered handsets will be reset when one of
them is reset.
29
8.
DEFAULT SETTINGS
Items
Default Values
LANGUAGE
ENGLISH
EXT RING
MELODY 6
INT RING
MELODY 6
INT RING VOLUME
VOLUME 5
EXT RING VOLUME
VOLUME 5
EARPIECE VOLUME
VOLUME 5
SPEAKER VOLUME
VOLUME 5
HANDSET NAME
VTECH
KEY TONE
ON
LOW BATTERY BEEP
ON
OUT OF RANGE BEEP
ON
AUTO ANSWER
ON
DATE FORMAT
DD--MM--YYYY
TIME FORMAT
24 HR
SET DATE
01--01--2012
SET TIME
00--00
Default Settings of Base
FLASH TIME
LONG
DIAL MODE
TONE
ECO MODE
ON
30
GET TO KNOW YOUR PHONE
Default Settings of Handset
9.
TROUBLESHOOTING
If you have difficulty with your phone, please try the suggestions listed below.
Problem
Solutions
Phone does not
work
•
•
Make sure you have installed the battery correctly.
Make sure the mains power is correctly connected.
No dial tone
•
Make sure the telephone cord is plugged into the phone
socket.
Make sure the mains power is switched on at the power
point.
Only use the telephone cord supplied with the phone.
The telephone line cord might be malfunctioning. Install a
new telephone line cord.
The handset might be out of range. Move it closer to the
telephone base.
Disconnect the telephone and connect the telephone
phone line cord to a different telephone. If the problem
appears again on the other telephone, your wiring or
local service might be the cause of the problem. Contact
your local telephone company.
•
•
•
•
•
Cannot dial out or
receive calls
•
•
•
Make sure the mains power is correctly connected.
The battery may need recharging.
Place the handset back on the base for 10 seconds and
try again. If that still does not work, disconnect the battery
and mains power for 10 minutes, then reconnect and try
again.
You have a dial
tone, but the
phone will not dial
out
•
If you are connected to a PABX, check whether you need
to dial an access code.
Handset does not
ring
•
•
•
Make sure the ringer volume is switched on.
Make sure the mains power is correctly connected.
Make sure the handset is registered to the base.
No display
•
The battery might be flat, dead or incorrectly inserted.
Recharge or replace the battery.
31
Problem
Solutions
Handset displays
“Out of range or
no pwr at base”
•
•
•
•
Make sure the handset is registered correctly to the base.
Make sure the mains power is correctly connected.
Make sure the handset is within range of the base.
If the battery is low, place the handset on the base /
charger to recharge.
Try cleaning the charging contacts.
Check that the mains power is correctly connected.
If the above measures do not correct the problem,
replace the battery.
You hear the busy
tone when you
press
•
•
Make sure the handset is in range of the base.
Another handset registered to the base might be on the
line.
No Calling
Number Display
number / name
displayed
•
You might need to subscribe to Calling Number Display
Service from your telephone company.
The caller may have blocked their number.
An exact name / number match was not found in your
phonebook. Make sure you have stored the complete
number including the area code.
The caller might not be calling from an area which
supports Calling Number Display.
Check if both you and the caller’s telephone companies
use equipment compatible with the Calling Number
Display service.
In some occasions, the Calling Number Display
information will show after the first or second ring.
•
•
•
•
•
Base unit does
not ring, but the
lights are on
•
•
•
Make sure you connected the telephone line correctly.
Make sure the base ringer is set to On.
You may have a faulty line or socket. Try with another
socket.
Buzzing noise on
my phone or on
other electrical
equipment nearby
•
Sometimes your cordless telephone can interfere with
other electrical equipment if they are placed too closely
to each other. It is recommended for you to place your
phone at least one metre away from electrical appliances
or metal obstructions to avoid any risk of interference.
32
TROUBLESHOOTING
•
icon does not
•
appear to be filling •
Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function! Therefore some of the
functions may be limited when used in PBX systems.
Technical Support
For technical support, please call VTech Technical Inquiry Hotline 852-2667 7433.
Please read out the serial number of this telephone to Technical Centre. The serial
number can be found in the battery compartment after having the batteries removed.
33
10. Technical Specifications
Basic Information
Dimensions
Handset: width / depth / height = 161.8 x 47.1 x 31 mm
Base: width / depth / height = 154 x 103.5 x 63 mm
Weight
Handset: 127.4g
Base: 152.6g
Valid Range
Indoor: 50m
Outdoor: 300m
Handset Operating Time
Standby time: 120 Hours approx.
Talk time: 12 Hours approx.
Frequency
1.88GHz to 1.9GHz
Number of Channels
10
Power Supply
Base
Input 100-240V 50/60Hz; output 6V 300mA adapter
Handset
2 x AAA NIMH PACK; 2.4V; 550mA rechargable batteries
34
TECHNICAL SPECIFICATIONS
RF Parameter
11.cARE AND MAINTENANCE
INSTRUCTIONS
Take care of your telephone
• Your cordless telephone contains sophisticated electronic parts, so you must treat
it with care.
• Avoid rough treatment.
• Place the handset down gently.
• Save the original packing materials to protect your telephone if you ever need to
ship it.
Replacing the handset batteries
• After a time, you may find that the handset battery is running out of charge more
quickly. This is a standard sign of wear and the battery will need replacing.
Avoid water
• You can damage your telephone if it gets wet. Do not use the handset in the rain,
or handle it with wet hands. Do not install the telephone base near a sink, bathtub
or shower.
NOTE
Remember that electrical appliances can cause serious injury if used when you
are wet or standing in water. If the telephone base should fall into water, DO NOT
RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE
LINE CORDS FROM THE WALL.Then pull the unit out by the unplugged cords.
Electrical storms
• Electrical storms can sometimes cause power surges harmful to electronic
equipment.
• For your own safety, take caution when using electric appliances during storms.
Cleaning your telephone
• Your telephone has a durable plastic casing that should retain its luster for many
years. Clean it only with a soft cloth slightly dampened with water or a mild soap.
• Do not use excess water or cleaning solvents of any kind.
• Never use household polish as this will damage the product.
• Never use a dry cloth as this may cause a static shock.
35
Customer Service Centre
Suite 1601, Lever Tech Centre, 69-71 King Yip Street,
Kwun Tong, Kowloon, Hong Kong.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
© 2012 VTech Telecommunications Ltd. All Rights Reserved.