advertisement
PORTABLE DVD
USER'S MANUAL
PDVD-102HB
Before connecting, operating or adjusting this product, please read this user's manual carefully and completely.
1
Table of Contents
Contents
Table of Contents
Safety Precautions
Before Use(Continued)
Identification of Controls
Main Unit
Battery Pack
Remote control unit
Insert the battery
Getting Started
Introduction
TFT screen adjust
Playing a DVD or Video CD(Operation)
Basic operation
Audio CD and MP3/WMA Disc Features
Playing an Audio CD or MP3/WMA
Playing a JPEG Disc
Playing a DVD VR format Disc
Playing a DIVX Movie Disc
Program playback(not for Picture CD/MP3)
P8-P9
P9
P10-P11
P12-P15
P12
P13
P13-P14
P14
P15
P16
P1
P2
P3-P4
P5-P8
P5
P6
P7
P8
P8-P11
SETUP Menu Setting
General Operation
General Setup Page
Speaker Setup Page
Dolby Digital Setup
Preference Page
Parameters and specifications
Troubleshooting tips
Definition of terms
P17-P23
P9-P10
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning:To reduce the risk of electric shock,do not remove the cover or back of this product.There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water,rain, or moisture. Do not place objects filled with water such as vases, on the Product.
Warning: This digital video disc player employs a laser system.
Use of controls,adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure.
Warning: To prevent direct exposure to laser beam,do not open the enclosure.Visible laser radiation when open.
N
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without permission.
This product features the copy protection function developed by
Macrovision.Copy protection signals are recorded on some discs.
When recording and playing the pictures of these discs picture
noise will appear.This product incorporates copyright protection
technology that is protected by method claims of certain U.S.
Patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners.Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Warning: Never stare directly into the laser beam.
Caution: Do not install this product in a confined space such as a book case or similar unit.
SERIAL NUMBER:
You can find the serial number on the back of the unit.This number
is unique to this unit and not available to others.You should record
requested information here and retain this guide as a permanent
record of your purchase.
Model No. ______________________________
Serial No. ______________________________
Date of Purchase_________________________
Warning: when the unit using by child, parents must make sure to let the child understand all contents in Instruction book how battery using to guarantee using battery correctly all the time.
Warning: when find battery overheat, swell or dour, please stop using battery and contact service centre for getting replacement.
Warning: do not charging battery on the place of insufficient ventilation such as: mattress, sofa, cushion , soft mat......
Warning: we will not take any responsibility if user incorrectly use battery, not following our warning instruction label on the battery case.
charge
Before using the player, please ensure that the local AC voltage is suitable for this unit.
strong impact over heat
40 C
2
Before Use(Continued)
Introduction
To ensure proper use of this product, please read this owner carefully and retain for future reference.
's manual
This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.
Symbol Used in this Manual
The lightning flash symbol alerts you to the presence of dangerous
voltage within the product enclosure that may constitute a risk of
electric shock.
About the Symbol Display
¡° ¡±may appear on your TV display during operation and indicates
that the function explained in this owner's manual is not available on that specific DVD video disc.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
The exclamation point alerts you to the presence of important
operating and maintenance / servicing instructions.
Indicates hazards likely to cause harm to the unit itself or other
material damage.
Storing Discs
After playing,store the disc in its case.Do not expose the disc to direct sunlight or source of heat and never leave it in a parked car exposed to direct sunlight.
Tip:
Indicates tips and hints for making the task easier.A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing,clean the disc with a clean cloth.
Wipe the disc from the center out.
DVD
VCD
CD
MP3
WMA
JPEG
DIVX
DVD and finalized DVD+R/RW
Video CDs
Audio CDs
MP3 Discs
WMA Discs
JPEG Discs
Divx Discs
Do not use strong solvents such as alcohol,benzine,thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
3
The above items are true of not only this unit but also most of the household electronic products.
Before Use (Continued)
DVD
Video CD (VCD)
Audio CD
(8 cm / 12 cm disc)
_________________________________________
In addition, this unit plays , DVD -R, DVD +R,DVD -RW,DVD +RW,
Kodak Picture CDs, SVCD, and CD-R / CD-RW that contains audio
Manufactured under license from Dolby Laboratories."Dolby",
"Pro Logic", and the double-D symbol are trademarks of
Dolby Laboratories.
Region code
This DVD player is designed and manufactured for playback of region "4"encoded DVD software.
This unit can play only DVD discs labeled "4" or "ALL".
4
N
RW
C0MPATIBLE
This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format.
Notes:
1.Depending on the conditions of the recording equipment or the
CD-R/RW (or DVD -R, DVD +R,DVD -RW, DVD +RW) disc itself, someCD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be played on the unit.
2.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
3.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in malfunctions.
4.
Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDS and Video CDs according to disc content designed by the software manufacturer, therefore some playback features may not be available or other functions may be added.
N
Notes on Region Codes
Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player's region code or the disc cannot play. If you try to play a DVD with a different region code from your player,the message "Check region Code" appears on the TV screen.
Dirty disc may cause bad picture.
4
Identification of Controls
Main Unit
1.LCD screen
2.Speakers
3. Mode
,
Select LCD size:16:9, 4:3 mode and set the LCD s brightness/contrast/hue.
4.Stop
5. Previous/Fast backward
6. Next/Fast forward
7. Play/Pause
8.Menu
9. (Left/right/up/down)
10.Enter
11.DC in
12.DC out
13.DC in 9-12V Jack
14.Headphone Jack
15.AV out
16.Volume knob
17.Power ON/OFF switch
5
Weak batteries can leak and severely damage the remote control unit.
Identification of Controls
Battery Pack
1
1.Power charge indicator during recharging , indicator is red.If
recharging is complete, charge indicator changes to green.
2.Remote sensor.
3.Battery pack.
2
Charge the battery pack before using it for the first time.
Attaching the battery pack
1.Match the hooks of the battery pack into the holes on the bottom of the player.
2.Combine the battery pack to push up until you can
hear the click sound.
RELEASE
3
Detaching the battery pack to separate the battery pack,pull the switch which is locate beside the battery pack then slide down the battery pack at the same time.
6
Identification of Controls
Remote control unit
1. PLAY/PAUSE ( )
Starts playback or pause playback.
2. STOP ( )
Stops playback.
14.MENU
Accesses menu on a DVD disc.
(Left/right/up/down)or set PBC on or off on a VCD disc.
3. Reverse Skip ( )
Go to previous chapter / track or to the beginning.
15.DISPLAY
Accesses On-Screen display.
16.AUDIO
Selects an audio language (DVD).
4. Forward Skip( )
Go to the next chapter / track.
17.SUBTITLE
Selects a subtitle language.
5.ZOOM
Enlarges video image.
18.ANGLE
Selects a DVD camera angle if available 6.REPEAT
Repeat chapter, track, title all.
19.SETUP
Accesses or removes setup menu.
7.A B
Repeat sequence.
20.10+ BUTTON
Add 10+ while your selection is more than10.
8. PROGRAM
Place a track on the program list.
9. MUTE
Disable Audio output.
10.TITLE
Return to DVD title menu.
21.STEP
Step the motion.
22. BUTTON
Fast backward.
23. BUTTON
Fast forward.
11.POWER
Switches DVD Player ON and OFF.
24 . PBC
PBC on/off switch.
12.0-9 NUMBER BUTTON
Selects numbered items in a menu.
25.MODE
Set LCD parameter.
13.ENTER
Confirms menu selection.
7
Turn off the power and keep AC cord pulled out from the outlet when connecting the systerm.
Identification of Controls
Insert the battery
Refer to the drawing, take the back cover of the remote control off and remove the empty battery receptacle.
Prior to shipping, a separating film was applied to the battery.
Remove this film.
Insert the battery into the receptacle and insert the receptacle into the remote.
For the best results,aim the remote towards at the player,sreceiving window. Stay within 15 feet and angles of 60 degrees or less.
Under normal use the battery will last for one year.
Remove battery during storage or when you are not using the DVD player for a long time.
Getting Started
Introduction
DVD+R/RW
DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc only once. DVD +RW and DVD -RW are two standards for re-writable media, meaning the DVD content can be erased and re-recorded. Single-sided discs can hold 4.38 gigabytes and double-sided discs hold twice as much.There are no dual layer single sided recordable discs.
VCD (Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along with quality stereo sound.
MPEG
MPEG is an international standard for video and audio compression.
MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, and MPEG audio.
MP3
MP3 is a popular compression format used for digital audio files that yields very high near-CD quality.
WMA
Windows media audio file. A type of coding / decoding developed by
Microsoft Corp.
JPEG
Joint Pictures Expert Group. JPEG is a compressed file format that allows you to save images with no limit on the number of colors.
DIVX
Divx is the name of a revolutionary new video codec.which is based
On the new MPEG-4 compression standard for video.You will be able to play Divx movies using this DVD player.
8
Getting Started
Introduction
Title (DVD video discs only)
A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, and cast interviews could be title 3. Each title is assigned a reference number enabling you to locate it easily.
Chapter (DVD video discs only)
A chapter is a segment of a title such as a scene in a film or one interview in a series. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded.
PBC: Playback Control (Video CD only)
Playback control is available for Video CD (VCD) version 2.0 disc formats. PBC allows you to interact with the system via menus, search functions, or other typical computer-like operations.
Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio CDs.
Track
A distinct element of audiovisual information, such as the picture or sound track for a specific language (DVD), or a musical piece on a video or audio CD. Each track is assigned a track number, enabling you to locate the track you want. DVD discs allow one track of video (with multiple angles) and several tracks of Audio.
TFT screen adjust
If you want to adjust the effect of TFT you can use the"MODE"and
" "on the panel."BRIGHTNESS" "CONTRAST" "HUE" and
"SCREEN MODE":16:9 / 4:3 are adjustable.
N
Note:
If you want to set the parameter to default value.you can go into
"setup"menu and set the "Default" option. See "set default setting".
9
Weak batteries can leak and severely damage the remote control unit.
Getting Started
Playing a DVD or Video CD(Operation)
Playback Setup
1. turn on the power switch at the left side of the product.
2. Press OPEN to open the disc tray and insert your chosen disc in the tray, with the playback side down.
N
3. Close the tray. Playback will start automatically.
DVD
Use the buttons to select the title/chapter you want to view, then press ENTER to start.Press MENU to return to the menu screen.
VCD
Use the number buttons to select the track you want to view and press MENU to return to the menu screen. Menu settings and operating procedures may differ.Follow the instructions on the each menu screen.
Notes:
1.If parental control is set and the disc isn 't fit for the rating setting you must input the password.(See "parental" on page 21).
2.DVDs may have a region code.Your player does not play discs that have a region code different from your player.
3.Unless stated otherwise,all operations described use the remote control.Some features may also be available on the setup menu.
Moving to another CHAPTER/TRACK DVD VCD
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:
1.Press SKIP or briefly during playback to select the next
(or previous)chapter/track or to return to the beginning of the current chapter/track.
2.Press SKIP twice briefly to step back to the previous chapter/track.
3.To go directly to any chapter during DVD playback, input the chapter/track number .
Changing the Audio Channel
VCD
Press AUDIO repeatedly during playback to hear a different audio channel (Stereo, Left, or Right).
Repeat A-B
DVD VCD
To repeat a sequence.
1. Press A-B at your chosen starting point " A". Appears briefly on the TV screen.
2. Press A-B again at your chosen end point." AB" appears briefly on the TV screen and the repeat sequence begins.
3. Press A-B again to cancel.
Repeat
DVD VCD
You can play a title/chapter/all/track on a disc repeatedly.
Press REPEAT during playback to select a desired repeat mode.
Specifications and design are subject to change without prior notice.
10
Getting started
Playing a DVD or Video CD(Operation)
DVD Video Discs - " Repeat Chapter / Title/Off"
Chapter: repeats the current chapter. Chapter
Title: repeats the current title.
All : repeats all the tracks on a disc.
Off : does not play repeatedly.
Video CDs, discs - " Repeat Track /All/Off"
Track : repeats the current track
All : repeats all the tracks on a disc.
Off : does not play repeatedly.
N
Notes:
1.On a Video CD with PBC, you must set PBC to Off to use the repeat function.
2.If you press SKIP ( or ) once during Repeat Chapter(Track) playback, the repeat playback cancels
Zoom DVD VCD
Use zoom to enlarge the video image:
1.Press ZOOM during playback or still playback to activate the
Zoom function. The square frame appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV screen in the following sequence:
3. Use the buttons to move through the zoomed picture.
4. To resume normal playback, press ZOOM button until screen becomes 1X.
N
Note:Zoom may not work on some DVDs.
11
Special DVD Features Checking the contents of DVD discs:
Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Input the corresponding number or use the buttons to highlight your selection.Then press ENTER.
MENU
1. Press MENU.If the current title has a menu, the menu appears on the screen. Otherwise, the disc menu may not appear.
2. The MENU offers features such as camera angles,spoken language and subtitle options, and chapters for the title.
3. Press MENU to exit.
Camera Angle DVD
If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. Press
ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on screen.
N
Note:
The angle indicator will blink on the TV screen during scenes recorded at different angles as an indication that angle switching is possible.
Changing the Audio Language
DVD
Press AUDIO repeatedly during playback to hear a different audio language or audio track.With DVD-RW discs recorded in VR mode that have both a main and a Bilingual audio channel, you can switch between Main (L), Bilingual (R), or a mix of both (Main +
Bilingual) by pressing AUDIO.
Subtitles
DVD
Press SUBTITLE repeatedly during playback to see the different subtitle languages.
TITLE button
DVD disc:
DVD
Press TITLE button, then the DVD menu or titles available on the disc will be displayed. Then you can use " " and ENTER button to select programs.
Basic operation
Audio CD and MP3/WMA Disc Features
Disc
The DVD player can play CD and MP3/WMA formatted recordings on CD-R,CD-RW,DVD+R and DVD+RW discs.
Audio CD
Once an Audio CD is inserted it will be played automatically.Its
playblack information will be show on screen,such as chapter elapse time.
/
WMA
1. Press to select a folder, and press ENTER to see the folder contents.
2. Press to select a track then press PLAY or ENTER. Playback starts.
MP3 follows:
WMA
WMA
WMA extension other than MP3/WMA.
CD-R physical format should be ISO 9660.
If you record MP3/ WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3/WMA files.We recommend that you use Easy-CD Creator,which creates an ISO 9660 file system.
File names should have a maximum of 8 letters and must incorporate an" .mp3" or " .wma" extension.
They should not contain special letters such as "/? * : < > l "etc.
The total number of files on one disc should be less than 650.
This DVD player requires discs and recordings tomeet certain technical standards in order to achieve optimal playback quality.
Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats(including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
12
Basic operation
Playing an Audio CD or MP3/WMA
Pause CD MP3 WMA
1. Press PLAY/PAUSE during playback.
2. To return to playback, press PLAY/PAUSE again.
Moving to another Track CD MP3 WMA
1. Press SKIP ( or ) briefly during playback to go to the next
(or previous) track or to return to the beginning of the current track..
2. Press SKIP twice briefly to go back to the previous track.
3. You can play any track by inputting its number.
Repeat Track/Folder/All/Off CD
You can play a track/folder/all on a disc.
MP3 WMA
1. Press REPEAT when playing a disc. The repeat icon appears.
2. Press REPEAT to select a desired repeat mode.
Track: repeats the current track.
Folder: repeats the current folder.
All: repeats all the tracks on a disc.
Off(No display): normal playback.
N
Note:
If you press SKIP ( )once during Repeat Track playback, the repeat playback cancels.
Playing a JPEG Disc
Slide Show JPEG
There are 16 types for slide show.
You can press Program repeatly to select the slide show Mode.
Still Picture JPEG
1. Press PLAY/PAUSE during slide show.The player will now go into
PAUSE mode.
2. To return to the slide show, press PLAY/ PAUSE again.
Viewing a JPEG Disc
Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files.
1.Insert a disc and close the tray. The file menu appears on the TV screen.
2. Press to select a folder, and press ENTER. A list of files in the folder Appears. If you are in a file list and want to return to the previous Folder list, use the buttons on the remote to highlight and press ENTER.
3. If you want to view a particular file, press to highlight a file and press ENTER or PLAY. Viewing the file proceeding starts.
4.If the DISC you insert is a Kodak Picture CD it will be played automatically.
N
NOTE:
Press" " to move to the next page , " " to return to previons folder,and " MENU" return to menu.
Zoom
JPEG
1.Press 'ZOOM' .
2,Used " " to enlarge,or " " to shorten the picture.
1.To repeat a sequence during disc playback press A-B at your chosen starting point. The Repeat icon"A"appear on the menu screen.
2.Press A-B again at your chosen end point.The Repeat icon
"AB" appear on the menu screen, and the sequence begins to play repeatedly.
13
3.To exit the sequence and return to normal play,press A-B again.The Repeat icon disappears from the menu screen.
Basic operation
Playing a JPEG Disc
To rotate picture
Press or during showing a picture to rotate thepicture clockwise or counter clockwise.
To listen to MP3/WMA music watching picture JPEG
You can display files while listering to MP3/WMA music files recorded on the same disc.
1.select a MP3/WMA desired.
2.select a picture.
JPEG disc compatibility with this player is limited as follows:
1.Depending upon the size and number of JPEG files, it could take a long time for the DVD player to read the disc¡¯s contents. If you don¡¯t see an on screen display after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc.
2.The total number of files and folders on the disc should be less than 650.Some discs may be incompatible due to a different recording format or the condition of disc.Ensure that all the selected files have the." jpg" extensions when copying into the CD layout. If the files have. "jpg" or. "jpeg" extensions, please rename them as."jpg" file.File names without."jpg" extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in Windows Explorer.
Playing a DVD VR format Disc
This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder.
This unit will play DVD-RW discs recorded using the Video recording (VR) format.
1. Insert a disc and close the tray.The DVD-VR menu appears on
the TV screen.
2. Press / to select a track then press PLAY or ENTER and playback starts.
N Note:
Unfinalized DVD-R/RW discs cannot be played in this player.Some
DVD-VR disc are made with CPRM data by DVD RECORDER.
Player does not support these kinds of discs and display
"unknown disc".
What is "CPRM"
CPRM is a copy protection system (with scramble system)only allowing therecording of 'Copy once' broadcast programs.CPRM stands for content Protection for Recordable Media.
This player is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings.CPRM recordings can only be made on
DVD-RW discs formatted in VR mode,and CPRM recordings can onlybe played on players that are specifically compatible with CPRM.
Basic operation
Playing a Divx Movie Disc
Using this DVD Player you can play DivX disc.
1. Insert a disc and close the tray.The folder menu appears on the
TV screen.
2. Press to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the
Folder list,use the or button on the remote to highlight or
button and press ENTER.
3. If you want to view a particular file,press / to highlight a file
and press ENTER or PLAY.
4. Press STOP to exit.
5.Press NEXT to move to the next page.
Divx disc compatibility with this player is limited as follows:
1.Available resolution size of the Divx file is under 720x576 (W xH) pixel.
2.The file name of the Divx subtitle is available by 56 characters.
3.If there is impossible code to express in the Divx file, it may be displayed as " _ "mark on the display.
If the number of the screen frame is over 30 per second,this unit may not operate normally.
If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
Playable DivX file
".avi ", ".mpg ", ".mpeg".
Playable Codec format
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx "
Playable Audio format
"AC3 ", "PCM ", "MP3 ", "WMA ".Sampling frequency: within 8 - 48 kHz (MP3),within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA)
15
Basic operation
Program playback( not for Picture CD/MP3 )
DVD/VCD/CD
The program function enables you to store your favourite tracks from any disc in the player memory.
1. Press PROGRAM
The program menu appears.
Program:TT(06)/CH(- -)
3
4
5
1
2
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
Exit
6
7
8
9
10
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
NEXT
2.Use the numerical keypad(0-9) to direct input the titles, tracks or chapters (single track number with digit '0' in front ,for example '05').
3.Move the cursor by pressing to select START.
Program:TT(06)/CH(- -)
1 TT: 06 CH:01
4
5
2
3
TT: 05 CH:01
TT: CH:
TT: CH:
TT: CH:
Exit
6
7
8
TT: CH:
TT: CH:
TT: CH:
9
10
Start
TT: CH:
TT: CH:
NEXT
Helpful Hint:
- Program can be activated only when a disc is in the DVD player.
- When the program menu appears, the setup menu setting is forbiddened.
4. To resume normal playback from programmed playback,Press
PROGRAM and press STOP button on the program menu.
Program:TT(06)/CH(- -)
1 TT: 06 CH:01
2
3
4
5
TT: 05 CH:01
TT: CH:
TT: CH:
TT: CH:
Exit
6
7
8
9
10
Stop
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
NEXT
When this unit is not used, please turn off the power and leave no disc inside.
16
SETUP Menu Setting
General Operation&General Setup Page
General Operation
1.Press SETUP to enter the Setup Menu.
2.Press ENTER to enter the next level submenu or confirm your selection.
3.Press to enter the submenu or returen to the previous menu
4.Press to highlight the desired menu.
To exit from the menu
Press SETUP The settings will be stored in the player's memory even if the player is switched off.
Dolby
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
PS Normal/PS
On
ENG
On
On
Set TV Display Mode
1.Press to highlight 'TV Display'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing to highlight the selected item.
17
General Setup Page
The options included in General Setup page are:" TV Display","Angle
Mark","OSD lang","Captions","Screen Saver".
Follow the steps below:
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
Go To General Setup Page
Dolby
1.Press SETUP to enter the setup menu.
2.Press to select the 'General Setup page'.
TV Display
Set the aspect ratio of the DVD Player according to the TV you have connected.
16:9
Wide
4:3
Letter Box
4:3
Pan Scan
Normal/PS
If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.
Normal/LB
If you have a normal TV. In this case , a wide picture with black
bands on the upper and lower portions of the TV screen will be displayed.
Wide
If you have a wide-screen TV.
SETUP Menu Setting
General Setup Page
Angle Mark
Displays current angle setting information on the right hand corner of the TFT screen if available on the disc.
Dolby
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
PS
On On
Off
ENG
On
On
Set Angle Mark
1.Press to highlight 'Angle Mark'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing to highlight the selected item.
On:Enable Angle Mark.
Off:Disable the current angle setting display.
OSD Lang
You can select your own preferred language setting. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc's default language will be used instead. The OSD language in the system menu will remain once selected.
Dolby
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
Set OSD Language
PS
On
ENG
On
On
English
French
German
Italian
Spanish
Portuguese
1.Press the keys to highlight 'OSD Lang'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing the to highlight the selected item.
4.Select a language and press ENTER.
18
SETUP Menu Setting
General Setup Page
Closed Captions
Closed captions are data that are hidden in the video signal of some discs.Captions are different from subtitles because captions hearing are impaired by showing the sound effects(e.g.,"phone ringing" and
" footsteps"),while subtitles do not.
Before you select this function,please ensure that the disc contains closed captions information and your TV set also has this function.
Dolby
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
PS
On
ENG
On
On
On
Off
Closed Caption
Speaker Setup Page
1.Press to highlight 'Screen Saver'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing to highlight the selected item.
On:In STOP,PAUSE or No DISC mode,if no actions are performed about 3 minutes,the Screen Saver will be activated.
Off:Screen Saver is disabled.
Speaker Setup Page
The options included in Speaker Setup Page is 'Downmix'.
- - Speaker Setup Page - -
Downmix
Dolby
1.Press to highlight 'Closed Captions'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing to highlight the selected item.
On:Enable Closed Captions.
Off:Disable Closed Captions.
19
Screen Saver
This function is used to turn the screen saver On or Off.
Dolby
- - General Setup Page - -
TV Display
Angle Mark
OSD lang
Captions
Screen Saver
PS
On
On
On On
Off
Screen Saver
Go To Speaker Setup Page
1.Press SETUP.
2.Press to select the 'Speaker Setup page'.
Downmix
This options allows you to set the stereo analog output of your
DVD Player.
Dolby
- - Speaker Setup Page - -
Downmix LT/RT
Stereo
Set Downmix Mode
SETUP Menu Setting
Speaker Setup Page&Dolby Digital Setup
1.Press the keys to highlight 'Downmix'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing the keys to highlight the selected item.
LT/RT :Select this option if your DVD Player is connected to a
Dolby Pro Logic decoder.
Stereo :Select this option when output delivers sound from only the two front speakers.
Dolby Digital Setup
The options included in Dolby Digital Setup are: 'Dual Mono ' and
'Dynamic '.
Dolby
- - Dolby Digital Setup - -
Dual Mono
Dynamic
Go To Dolby Digital Setup
1.Press SETUP.
2.Press to select the 'Dolby Digital Setup'.
Dual Mono
Dolby
- - Dolby Digital Setup - -
Dual Mono
Dynamic
Stereo
L-Mono
R-Mono
Mix-Mono
Dual Mono (1+1) Setup
1.Press the keys to highlight 'Dual Mono'.
2.Enter its submenu by pressing .
3.Move the cursor by pressing the keys to highlight the selected item.
To select the setting that matches the number of speakers you have connected.
Stereo:Left mono sound will send output signals to Left speaker and Right mono sound will send output signals to Right speaker.
L-Mono:Left mono sound will send output signals to Left speaker and Right speaker.
R-Mono:Right mono sound will send output signals to Left speaker
and Right speaker.
Mix-Mono:Left and Right mixed mono sound will send output signals to Left and Right speakers.
Dynamic
To optimize the dynamic sound output high volume outputs are softened, enabling you to watch your favourite movie without disturbing others.
The levels for dynamic selection:Full,7/8,3/4,5/8,1/2,3/8,1/4,1/8 and Off.
Dolby
- - Dolby Digital Setup - -
Dual Mono
Dynamic ---
---
---
---
---
---
Full
Off
Set DRC To 1/8
20
SETUP Menu Setting
Preference Page
Preference Page
The options included in Preference page are : 'Audio',
'Subtitle','Disc Menu','Parental','Password',and 'Default'.
Dolby
- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
Password
Default
Go To Preference Page
1.Press SETUP.
2.Press to select the 'Preference Page'.
Note:
Some Preference features can be selected only during 'No
Disc' condition or STOP( ) mode.
Audio,Subtitle and Disc menu
These options set the Audio,Subtitle and Disc menu language fit for you
Dolby
- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
Password
Default
ENG
ENG
ENG
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Preferred Audio Language
- 'Audio '(disc 's soundtrack)
- 'Subtitle '(disc 's subtitles)
- 'Disc Menu '(disc 's menu)
1.Press to highlight DVD language options.
2.Enter its submenu by pressing .
3.Select a language and press ENTER.
4.Repeat steps 1~3 for other language settings.
21
SETUP Menu Setting
Preference Page
Parental
Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc.This feature lets you set a playback limitation level.The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes.
VCD,SVCD,CD have no level indication,so parental control function has no effect on those kinds of discs.This applies to most illegal
DVD discs.
Dolby
- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
Password
Default
ENG
ENG
ENG
2 G
3 PG
4 PG13
5 PGR
6 R
7 NC17
8 ADULT
Off
Set Parental Control
1.Press to highlight 'Parental' .
2.Enter its submenu by pressing .
3.Use to highlight a rating level for the disc inserted.
DVDs that are rated above the level you selected will not play unless you enter your four-digit password and choose a higher level rating.
To disable Parental controls and have all Discs play,choose 'Off'.
Helpful Hint:
- Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover. The rating level feature does not work for such Discs.
Rating explanations
1 KID SAF
- Kids material;recommended especially for children and viewers of all ages.
2 G
- General Audience;recommended as acceptable for viewers of all ages.
3 PG
- Parental Guidance suggested.
4 PG13
- Material is unsuitable for children under age 13.
5-6 PG-R
- Parental Guidance-Restricted;recommended that parents restrict children under 17 from viewing or allow to view only when supervised by a parent or adult guardian.
7 NC17
- No children under age 17;not recommended viewing for children under age 17.
8 ADULT
- Mature material;should be viewed only by adults due to graphic sexual material,violence or language.
OFF
- It will play all discs.
Password
This feature is used for Parental Control.
Enter your four digit password when a hint is displayed on the screen.The default password is 1369.
Dolby
- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
Password
Default
Change Password
ENG
ENG
ENG
Change
1.Press to highlight 'Password '
2.Enter its submenu by pressing .
3.Press ENTER to open the 'New Password ' page.
22
SETUP Menu Setting
Preference Page
Old Password
New Password
Confirm PWD
OK
23
4. Enter the default password 4-digit code.
5. Enter the new 4-digit code.
6. Enter the new 4-digit code a second time to confirm.
The new 4 digit code will be take effect.
7. Press OK to exit.
Helpful Hints:
- If the password has been changed ,the parental and disc lock code will also be changed.
- The default password (1369)is always active even the password
has been changed.
Default
Setting the 'Default ' function will reset all options and your personal settings to the factory defaults and all your personal settings will be erased.
Dolby
- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
Password
Default
ENG
ENG
ENG
Reset
Load Factory Setting
1.Press to highlight 'Default ' .
2.Highlight Reset by pressing .
3.Press ENTER to confirm selection.
Caution!
- When this function is activated,all settings will be reset to
factory defaults.
Parameters and specifications
Battery Parameters
Battery Specifications£º
Output£º7.4V
Charge / Discharge Time£º
Standard charge time£º3h ~ 5h
Storage and work circumstances£º
1. Storage circumstances Temperature Humidity
6 months
1 week
-20 C ~ +45 C
-20 C ~ +65 C
65+20%
65+20%
2.Work circumstances Temperature Humidity
Standard charge
Standard discharge
0 C ~ +45 C
-20 C ~ +65 C
65+20%
65+20%
Maintenance and Service
Refer to the information in this chapter before contacting a service technician.
Handling the unit
When shipping the unit
Please save the original shipping carton and packing materials.
If you need to ship the unit, for maximum protection,re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray near the unit.
Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,or thinner, as these might damage the surface of the Unit.
Maintaining the unit
The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment,regular inspection and maintenance are recommended after every 1,000 hours of use. For details,please contact your nearest authorized service center.
The chargeing time is various acording to the transformation of quantity of electric charge
24
Parameters and specifications
Electronical parameters
Power requirements
Dimensions (Approx.)
Power consumption
Weight (Approx.)
: AC 100-240 V , 50/60 Hz
: 200(L)X150(W)X38.8MM
: <10W
: 0.66kg
Operating humidity : 5 % to 90 %
VIDEO OUT
AUDIO OUT
Audio
:1.4 Vrms (1 KHz, 0 dB)
:Speaker:1WX2, 1X Headphone output
System
Laser
Frequency response
Signal-to-noise ratio
Dynamic range
Accessories
:Semiconductor laser, wavelength 650 nm
: 20Hz to 20 kHz(1dB)
:More than 80 dB (ANALOG OUT connectors only)
:More than 85 dB (DVD/CD)
:Video/Audio cable,Remote control,
Stereo headphone,Rechargeable battery,
Car cigarette Adapter
N
Note: Design and specifications are subject to change prior notice.
25
Troubleshooting tips
Troubleshooting tips(Common)
Before calling for service, you can check the following items on symptoms and solutions
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are proper.
No picture:
Ensure that the equipment is connected properly.
Ensure that the LCD is on.
No play:
Condensation has formed : wait about 1 to 2 hours to allow the
player to dry out.
This player can't play discs other than DVDs, MP3s and CDs.
The disc may be dirty and require cleaning .
Ensure that the disc is installed with the label side up.
No remote control:
Check the batteries are installed with the correct polarities(+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control unit and the
remote control sensor.
Operate the remote control unit at a distance of not more than 8
meters from the remote control sensor.
No key operation(by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the re-connect it.(The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
Battery does not work
check whether the battery is out of power or in proper connection.
Troubleshooting tips(DVD)
Play does not commence even when title is selected:
Confirm the "Rating" settings.
Audio soundtrack and/or subtitle language is not the one selected at the initial settings:
If the audio soundtrack and/or subtitle language does not exist on
the disc, the language selected at the initial setting will not be seen/
heard.
No subtitles:
Subtitles appear only with discs which contain them.
Alternative audio soundtrack(or subtitle) language fail to be selected:
An alternative language is not selected with discs which do not contain
more than one language.
In the case of some discs, the alternative language cannot be selected by
operating the AUDIO or SUBTITLE button. Try selecting it from the DVD
menu if one is available.
Angle cannot be changed:
This function is dependent on software availability. Even if a disc has a
number of angles recorded, these angles may be recorded for specific
scenes only.
26
Definition of terms
Definition of terms
Angle
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles(the same scene is shot from the front, front the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.
DVD
This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. Incorpor-ating a new video compression technology(MPEG II) and high-density recording technology, DVD enables esthetically pleasing full-motion video to be recorded over long periods of time(for instance, a whole movie can be recorded).
DVD has a structure consisting of two 0.6mm thin discs which are ad-hered to each other. Since the thinner the disc, the higher the density at which the information can be recorded, a DVD disc has a greater capacity than a single 1.2mm thick disc. Since the two thin discs are adhered to each other, there is the potential to achieve double-sided play sometime in the future for even longer duration play.
Chapter number
These numbers are recorded on DVD discs. A title is subdivided into many sections, each of which is numbered, and specific parts of video presentations can be searched quickly using these numbers.
Subtitles
These are the printed lines appearing at the bottom of the screen which translate or transcribe the dialogue. They are recorded on DVD discs.
Track number
These numbers are assigned to the tracks which are recorded on CDs.
They enable specific tracks to be located quickly.
27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement