Samsung SHS-DL22 SRF Product guide

Product Features
You can open the door with the fingerprints
After the fingerprint registration, you can open a door without any
password or card key. (up to 100 fingerprints recordable)
You can open the door with the password
After the password registration, you can open a door without additional
key.
Automatic door lock function
The door will be locked automatically when the door is closed on this
mode. (Automatic / manual lock mode selectable)
Internal forced lock mode
It is not allowed to unlock the door from outside with password or
fingerprint on the internal forced lock mode. This function prevents the
door from burglar intrusion or trespass, especially at night.
Incorrect password and children’s mischief
protection
If incorrect password is entered three (3) times consecutively, the doorlock will stop working in one (1) minute.
Fire alarm and emergency door unlock
If the door-lock detects inside temperature exceeding over certain level
of degree, an emergency alarm will sound and automatically arrange
to unlock the door. (This function may not work in some conditions.)
1
Contents
Product Features
1
Contents
2
Safety Instructions
4
Before using the product
7
Product Specification .................................................................. 7
Components .............................................................................. 8
Front Body Parts .......................................................................10
Main Body Parts........................................................................12
Mortise ....................................................................................13
Battery Replacement..................................................................14
How to use the emergency battery...............................................16
How to use the emergency key.................................................... 17
Basic Functions
18
How to reset the system (Password/Fingerprint/Remote Controller)...18
Password Registration ................................................................19
Fingerprint Registration ..............................................................21
Deleting Fingerprints ................................................................ 23
Remote Controller Registration ................................................... 24
Deleting Remote Controller ........................................................ 26
Unlock the door-lock with password from outdoor..........................27
Unlock the door-lock with fingerprint from outdoor ....................... 28
Unlock the door-lock from indoor ............................................... 29
Lock the door-lock from outdoor ................................................ 30
Lock the door-lock from indoor .................................................. 30
2
Additional Functions
31
Automatic / Manual lock mode setting.......................................... 31
Sound Setting ...........................................................................32
Warning / Emergency Alarm .......................................................34
Troubleshooting
38
Quick Manual
40
Product Specification
42
3
Safety Instructions
Please read these safety instructions carefully to prevent the product damage or injury
and keep this manual for future reference.
Symbols
Warning
This symbol is intended to prevent a user from injury or hazards.
Caution
This symbol is intended to prevent a product from physical or electrical damage.
Note
This symbol is intended to provide a user with additional product information.
Symbols used in the manual
General warning and caution
Prohibited action while handling the product
Guide a user to use the product
4
Installation instruction
Do not try to install or repair the
product yourself. Refer all servicing
to qualified service personnel or
official dealer.
Manufacturer is
not responsible for
any damage caused
by improper
installation or repair
To install and operate the product,
the door thickness should not
exceed over 5mm.
Product may not work
at the door, which is
more than 5mm thickness
Operation instruction
Do not disclose your password to
other people and change it
regularly.
Do not operate the product with
wet hands and never spill water /
drinks into the product.
Avoid the risk
of theft.
It may cause product
damage or
malfunction.
Handle the product gently and do
not push sharp object to / into the
product.
Make sure the door is locked
when going out.
It may cause
product damage
or scratch.
Manufacturer is not
responsible for
any loss or damage
for this.
5
Operation instruction
Keep attention to your finger
when the number pad cover is
shut
It may cause an injury
to your finger.
Do not drop or impact the remote
controller.
It may cause damage
to remote controller.
Repair & maintenance
Make sure the battery polarity
when inserting batteries.
Use only ‘AA’ sized battery and
do not mix old or different brand
It may cause leakage,
breakage or overheat
on the product.
It may shorten the product life and
cause damage.
Do not use liquid or aerosol
cleaners. Use only damp cloth.
Replace the batteries within a
week after the battery
replacement alarm.
It may cause damage or scratch.
The product will
be powered off
when batteries
run out.
6
Before using the product
Product Specification
SHS-DL22 series include / exclude following option;
No.
Model
Emergency
Key
Automatic
number pad
Password
Fingerprint
cover open
Remote
Controller
1
SHS-DL22 SNF
○
○
○
○
×
2
SHS-DL22 SRF
○
○
○
○
○
7
Components
Front Body
(installed outside of a door)
Main Body
(installed inside of a door)
User Guide
Main Body Install Panel
8
Main Body Rubber Pad
Mortise
Strike Box
Strike
Mounting screws for the Install
Panel & Front Body
Door handlebar
Screws for
BOLT FH+ M5 X L30
mounting screws
the mortise fixing
BOLT M4×L8
BOLT BH+ M5×L33
Mounting screws for the Install Panel
& Main Body
BOLT small head FH+ M4×L8
Emergency key (5EA) 'AA' batteries (LR6, 8EA)
Screws for the inner body fixing
BOLT PW+ #8×L16
L-shape hexagonal
Screws for the strike fixing
BOLT small head FH+ U10-24×L10
wrench(2mm)
Handle shaft Handle shaft
spring
Option
Remote Controller Holder
'AAA' Batteries (LR03, 2EA)
Remote Controller
9
Front Body Parts
Cover open
Open
Number pad cover
Number pad
Cover open/close button
Cover close
Indicating lamp
Close
Fingerprint reader
Lock indicator
Exterior handlebar
Emergency keyhole
Emergency power
supply plate
10
No.
Part
Function
1
Number pad cover Protect the number pad from dust and scratch.
2
Number pad
Enter the number to register, change or delete the password. A
user can use the number pad to open a door.
3
Cover open/close
button
Press this button to open / close the number pad cover. The
number pad will be closed automatically unless other button is
pressed within five (5) seconds.
4
Indicating lamp
Illuminate in blue when the door is working and blink in red to alert
the low battery.
5
Fingerprint reader
Read the fingerprint placed on the fingerprint reader and open a
door.
6
Lock indicator
Illuminate in blue when a user open the door with the password,
fingerprint or emergency key.
7
Exterior handlebar
Pull down the exterior handlebar to open the door when the door
is unlocked.
8
Emergency
keyhole
Insert the emergency key and turn to open a door when the
door-lock is powered off or malfunction.
9
Emergency power
supply plate
Contact 9V battery to the emergency power supply plate to supply
instant power to the door-lock when batteries are completely
discharged.
11
Main Body Parts
Battery cover mounting screw
Battery cover
Antenna (Option)
L-shaped wrench storage
Remote button
Fingerprint button
Password button
Open button
Interior handlebar
12
No.
Part
Function
1
Battery cover
mounting screw
Hold the battery cover from the main body.
2
Battery cover
Protect the batteries and registry buttons.
3
Antenna
For wireless home network communication (when it is used with H/A
or H/N devices).
4
L-shaped wrench
storage
Store the L-shaped wrench to fasten or loosen the exterior
handlebar mounting screws.
5
Remote button
Press this button to register / delete the remote controller.
6
Fingerprint button
Press this button to register / delete the fingerprint information.
7
Password button
Press this button to change password.
8
Open button
Lock/Unlock the door from the inside / set internal forced lock
9
Interior handlebar
Pull down the interior handlebar to open the door
Mortise
Dead bolt
Latch bolt
Automatic lock sensor
No.
Part
Function
1
Dead bolt
Lock the door on the door frame
2
Latch bolt
Hold the door on the door frame
3
Automatic lock
sensor
Detect whether the door is open or closed (on the automatic lock
mode only)
13
Battery Replacement
1. When the low battery alarm sounds...
Warning tune
Low battery warning melody will sound when
you open the door with a password or
fingerprint. If the indicating lamp on the front
body or [Open] button on the main body turns
on before the door is open, replace the
batteries.
About Battery
The batteries will last more than twelve (12) months on the
basis of using 10 times a day (SHS-DL22SNF model).
The battery life will vary from the brand, manufactured
date and environment and use ‘AA’ size 1.5V x 8EA
only.
2. How to open the battery Cover
Remove the battery cover mounting screw in anti-clockwise and lift up the battery cover.
14
3. How to replace the battery
Replace eight (8) batteries within a week from
the first low battery warning melody.
- The door-lock will be powered off when the
batteries run out.
- It is recommended to replace all batteries at once and do not mix old or different brands.
- Make sure the battery polarity when inserting batteries. It may cause product damage.
- Battery leakage may occur, check the battery on the door-lock regularly in every six
months.
- After the low battery alarm, a user can not register / change / delete / reset the product.
Replace the battery and then register / change / delete / reset it.
15
How to use the emergency battery
1. If the batteries are completely discharged…..
Replace the batteries before they are discharged. The door-lock will stop working if you
fail to replace the batteries on time.
or
Reading Fingerprint
Entering Password
The door-lock will not work properly
2. 9V Square-typed battery
Purchase and use a 9V battery to supply
instant power to the unit.
It is recommended to use the Alkaline battery rather than
rechargeable or manganese one to lengthen the battery life.
3. Opening the door with the emergency battery
or
Contact 9V battery to the emergency power supply plate and enter your password or
place a fingerprint on the reader.
16
How to use the emergency key
Use the emergency key when the batteries are discharged or inside electric mechanism
is out of order.
There is the emergency keyhole under the
front body.
Insert emergency key and turn it to unlock the
door.
Pull down the exterior handlebar to open the
door.
- Keep the emergency key in a safer place where accessible to outside door-lock or carry
it with you.
- When you lose the emergency key, we recommend you contact the service center to
change the whole key cylinder (Changing the key cylinder is charged).
- Pull out the emergency key after the door is open and keep it secure.
17
Basic Functions
Explain how to reset and register / delete the password, fingerprint and remote
controller. In addition, instruct how to open / close a door.
How to reset the system
(Password/Fingerprint/Remote Controller)
After the system reset, all information of previous password, fingerprint and remote
controller registration will be erased and the password will be set ‘1234’ ( factory default ).
Register new password before starting the system.
1. Opening the cover (from indoor)
Remove the battery cover mounting screw in
anti-clockwise and lift up the battery cover.
2. Press [Password] & [Fingerprint] button (from indoor)
Press [Password] button and [Fingerprint]
button simultaneously for five (5) seconds.
- Success: Beep Beep
3. Enter password (from outside)
Enter current password or ‘4560852580’ and
then press [¹] button.
- Success: Cheerful tune
- Failure: Beep~
18
Password Registration
The password is available from four (4) up to twelve (12) digits. (You can register only
one password.) Register new password after the system reset or purchase.
Make sure if your door is open during the new password
registration as the door may be locked.
Door open
1. Press [Password] button (from indoor)
Beep
Lift up the battery cover from the main body.
Press [Password] button.
2. Enter the current password (from outdoor)
Tunes
Enter current password (or ‘1234’ after the
system setup) and press [¹] button.
19
3. Enter new password (from outdoor)
Beep Beep
Enter a new password (from 4 up to 12 digits)
and press [¹] button.
- It is recommended to use over 6 digits password
for the security purpose. (The number 0 ~ 9 is
selectable for the password).
4. Confirm new password (from outdoor)
Cheerful tune
Enter a new password again and press [¹]
button for confirmation. The new password
registration is completed.
5. Test new password registration (from outdoor)
Cheerful tune
Do not close the door before you test the new
password registration is successful or not.
- See the page 27 (Unlock the door-lock with
password from outdoor)
- It is recommended to change the password regularly for security reason.
- Take good care of the password and not allow anyone to know it except for authorized persons.
- To change the password, register a new password or reset the system.
20
Fingerprint Registration
It is available to register max. one hundred (100) of fingerprints.
1. Press the [Fingerprint] button (from indoor)
Beep
Lift up the battery cover from the main body.
Press [Fingerprint] button. The number pad
cover will be open automatically.
2. Enter the password (from outdoor)
Tune
Enter current password and press [¹] button.
3. Read Fingerprint (from outdoor)
Red light
Beep
When the fingerprint reader part turns in red,
place your fingerprint on the fingerprint reader
and wait until the beep sound is heard.
(Approx. 1 second)
Tune
The fingerprint reader part will turn off
and then on. Place your fingerprint
again. The long beep (tune) will sound
and your fingerprint registration is
completed.
- Some fingerprints can not be registered properly when the fingerprint is cut or
contaminated with dust. It is recommended to register more than two (2) fingerprint of your.
21
4. Complete fingerprint registration (from outdoor)
Press [¹] button to complete the fingerprint
registration
- The number pad cover will be closed automatically
after the fingerprint registration is completed.
5. Test fingerprint registration (from outdoor)
Lift up the fingerprint reader cover and place your fingerprint into the fingerprint reader.
How to register extra fingerprints
Continue registration
To continue other fingerprint registration,
press [#] button within five (5) seconds and
place a new fingerprint.
The number pad cover will be closed unless
a new fingerprint is placed within five (5)
seconds.
Registering later
Press [¹] button to end fingerprint
registration.
How to place fingerprint on the reader
Correct
Front view
Side view
The fingerprint is positioned
correctly.
22
Incorrect
The finger
is moving
Finger is on
one side
Finger is
outside
Too deep
Deleting Fingerprints
Registered fingerprints can not be deleted individually. All registered fingerprints will be
erased after pressing [Fingerprint] button.
The erased fingerprint can not be used to open a door.
1. Press [Fingerprint] button (from indoor)
Beep Beep
Lift up the battery cover from the main body
and press [Fingerprint] button for five (5)
seconds.
2. Enter the password (from outdoor)
Success: Cheerful tune
Failure: Beep
The number pad cover will be
open automatically. Enter
current password and press
[¹] button.
- Register new fingerprint after the previous fingerprint information is deleted.
- After deleting the fingerprint information, if the door is closed by accident,
you can use the password or emergency key.
23
Remote Controller Registration
It is available to register up to two (2) remote controllers.
1. Press [Remote] button (from indoor)
Beep
Lift up the battery cover from the main body.
Press [Remote] button.
2. Enter the password (from outdoor)
Tune
The number pad cover will be open
automatically. Enter current password and
press [¹] button.
3. Press [Open] button (from indoor)
Tune
Press [Open] button on the remote controller
that you want to register for three (3) seconds.
To continue remote controller registration, repeat the above procedure.
24
4. Test remote controller registration
During automatic lock mode
- Press [Open] button on the remote controller
During manual lock mode
- Press [Open] button to lock or unlock the door.
25
Deleting Remote Controller
Registered remote controllers can not be deleted individually. All registered remote controllers
will be erased after pressing [Remote] button.
If you delete the remote controller registration information, it can not be used to open a door.
1. Press [Remote] button (from indoor)
Beep
Lift up the battery cover from the main body
and press [Remote] button for five (5) seconds.
2. Enter the password (from outdoor)
Success: Cheerful tune
Failure: Beep
When the number pad cover
is open automatically, enter
the password and press [¹]
button.
- Register new remote controller after the previous fingerprint information is deleted.
- After erasing the remote controller information, if the door is closed by accident,
you can use the password, fingerprint or emergency key.
26
Unlock the door-lock with password from
outdoor
1. Opening the cover
Press [Cover Open/Close] button.
2. Enter the password
Success: Cheerful
tune
Failure: Beep
The number pad will
illuminate in blue
Enter the password and
press [¹] button.
The number pad cover
will be closed
automatically.
- Password should be entered when the number pad illuminate in blue. After the light turns
off, press [¹] button and enter the password.
- The number pad cover may be closed automatically if the light turns off.
- If incorrect password is entered, press [#] button to cancel it and re-enter the correct
password.
If incorrect password is entered for three (3) times consecutively, a warning alarm will
sound (Biri ~ Biri ~ Biri) for ten (10) seconds and the door-lock will not work for a minute.
A beep sound will be heard in every ten seconds during incorrect password and children
mischief protection mode and the system will be restored with tune sound after a minute. If
pressing [#] button for three times consecutively, the children mischief alarm will sound.
27
Unlock the door-lock with fingerprint
from outdoor
Place the fingerprint correctly when the fingerprint reader illuminates in red.
1. Open the cover
Lift up the fingerprint reader cover.
2. Read fingerprint
Success: Cheerful tune
Failure: Beep
The fingerprint reader will turn red. Place
the fingerprint for one second.
Close the fingerprint reader cover and pull
down the exterior handlebar to open a door.
- Unregistered fingerprint or not properly read fingerprint will sound warning beep.
28
Unlock the door-lock from indoor
Pull down the handlebar
Cheerful tune
Pull down the interior handlebar.
Press the [Open] button
Press the [Open] button, then Pull down
the interior handlebar.
Press [Open] button
Press [Open] button on the remote controller
- During manual lock mode, the door-lock will be
unlocked or locked if the [Open] button is pressed.
29
Lock the door-lock from outdoor
Press [Cover Open / Close] button
During the manual lock mode, press [Cover
Open / Close] button to lock the door.
Lock the door-lock from indoor
Automatic lock mode
Manual lock mode
Tune
The door-lock will be locked in a second
when the door is closed.
30
Press the [Open] button or the [OPEN] on
the remote controller to lock the door.
Additional Functions
Automatic / Manual lock mode setting
It is available to set the automatic lock mode to allow the door locked automatically
when the door is closed.
Beep
Beep
Tune
Mode selection
[4] button : automatic lock
[5] button : manual lock
Press [Password] button for five (5)
seconds.
Press the number you want to select
and then press [¹] button. The lock
mode selection is completed.
About automatic lock and manual lock mode
- Automatic lock mode: The door-lock will be automatically locked when the door is
closed. (It may not work if the batteries are completely discharged.)
- Manual lock mode: Although the door is closed, it will not be locked. To lock the door,
press the [Open] button, [Cover Open/Close] button or [Open] button of the
registered remote controller.
- On the manual lock mode, the door-lock won’t be locked itself automatically when the
door is closed. Make sure if the door is locked properly.
- If the dead bolt on the mortise moves outside when the automatic lock sensor is pressed,
it indicates the automatic lock mode is selected.
- On the automatic lock mode, the beep sound will be heard in every fifteen (15) seconds if
the door is open. (There is no beep sound on the manual mode.)
- The door-lock will be automatically locked again if more than seven (7) seconds elapse
after the password is pressed or the fingerprint is placed.
31
Sound Setting
It is available to set the sound when the number pad is pressed; the door-lock is
locked or unlocked.
Setting the sound function
The factory default is set as the sound function on.
Beep Æ
Beep Beep
Tune
Sound setting
[0] button : sound off
[1] button : manner mode
[2] button : sound on
Press [Password] button on the main
body for five (5) seconds.
Press the number you want to select
and press [¹] button.
Sound Settings
-
32
[0] button: Sound is off (except for alarm / warning sound)
[1] button: Sound is off (except for the number pad and alarm / warning sound)
[2] button: Sound is on
Sound will be heard during the registration mode regardless of the sound mode you
selected, After the registration mode, the sound will work according to the sound mode
you selected.
Volume Setting
The factory default is set as a medium volume.
Beep Æ
Beep Beep
Tune
Volume adjustment
[7] button: Low
[8] button: Medium
[9] button: High
Press [Password] button on the main
body for five (5) seconds.
Press the number you want to select
and press [¹] button. The volume
adjustment is completed.
33
Warning / Emergency Alarm
Warning Alarm
When misused, a warning alarm will sound and will block the door-lock from working
Incorrect password
Number pad cover
Alarm
( Biri ~ Biri ~ Biri for
10 seconds)
If incorrect password is pressed consecutively
for three (3) times;
(A warning alarm will sound for ten (10)
seconds and the door-lock will freeze for a
minute. A beep sound will be heard in every
ten seconds during incorrect password and
children mischief protection mode and the
system will be restored with cheerful tune
sound after a minute.
Alarm
( Biri ~ Biri ~ Biri for
10 seconds)
If the number pad cover is lifted up and shut
in three (3) times or [#] button is pressed in
three (3) times ;
(A warning alarm will sound for ten (10)
seconds and the door-lock will freeze for a
minute. A beep sound will be heard in every
ten seconds and the system will be restored
with cheerful tune sound.)
Turn off the warning alarm
[From indoor]
[From outdoor]
or
Press the [Open] button or [Open] button
of the remote controller, or Pull down the
handlebar.
34
Place the fingerprint or press the password and
then press [¹] button to open a door.
It is only possible to turn off the warning alarm
while the alarm sounds (within 10 seconds)
Security Mode Setting
An emergency alarm will sound if someone inside tried to open a door during a resident
absence.
Cheerful tune
Cheerful tune
Arm Security
Enter the password and press
[¹] button.
Press [#] button for three (3) seconds
while the door is closed
The Security Mode will be disarmed automatically if a correct password or fingerprint is
entered or the emergency key is inserted.
Security Alarm
[From indoor]
Beep ~ Beep ~ Beep ~
(For 5 minutes)
When the security mode is on, if you press
the [Open] button or pull down the
handlebar to open the door,
[From outdoor]
Disarm setting
or
Place a fingerprint or enter the
password and then press [¹] button to
open a door.
35
Intrusion Detect Function
A warning alarm will sound if someone tries to break the door-lock or force the door
open. (This function is not selectable and set as factory default.)
Beep ~ Beep ~ Beep ~
(For 5 minutes)
[Indoor]
If someone tries to break the door-lock
or force the door open, the automatic
lock sensor will detect it and will sound
a warning alarm.
How to cancel the warning alarm
[Indoor]
[Outdoor]
or
or
After open the battery cover, pull out batteries,
or press a button among [Password],
[Fingerprint], [Remote], or press the [Open]
button of the remote controller.
Place a registered fingerprint or enter the
password and press [¹] button to open
the door.
Fire Alarm
If a fire detected, the door-lock will go off a warning alarm to allow people to
escape.(This function is not selectable and set as factory default.)
Beep ~ Beep ~ Beep ~
(For 15 seconds)
The thermal sensor of the door-lock will detect a fire and go off a warning alarm. After the
warning alarm, the door-lock will be unlocked automatically.
(If the indoor temperature come down, the door-lock will be restored and resume.)
36
Internal Forced Lock Mode
During this mode, it is not allowed to unlock the door from outside with password and
fingerprint.
Internal forced lock
setting
[Indoor]
Beep ~ Beep
While the door is locked, press the
[Open] button longer than two seconds.
[Indoor]
[Outdoor]
Internal forced lock
mode
Beep ~ Beep
Beep ~ Beep
If you press the [Open] button or [OPEN]
button of the remote controller, a
warning alarm will go off.
During the internal forced lock mode, if the
fingerprint reader cover is open or [Cover
Open/Close] button is pressed, the alarm will
sound.
Cancel internal forced
lock
[Indoor]
Pull down the interior handlebar to
disarm the internal forced lock mode.
Be careful because the door can be open from the outside only with the emergency key
during the internal forced lock mode. Take care not to select this mode by children.
37
Troubleshooting
If the problem persists after trying the following troubleshooting, please contact your local
dealer or the A/S center.
Power
Problem
The power is off
Checking point
- Make sure if any button on the unit is being pressed
- Make sure the polarity of the battery inserted and if the
batteries are completely discharged
Reference
Page 14~16
Password/Fingerprint
Problem
Checking point
Reference
Can not change the
password
- Make sure the password should be entered when the
number pad illuminates in blue. If the first digit of the
password is entered, the rest digits should be entered
within 5 seconds.
- Replace the batteries immediately if they are discharged.
- Refer to the “Password Registration”
Page 19~20
Can not register the
fingerprint
- Place the fingerprint after the fingerprint reader part
illuminates in red.
- To continue new fingerprint registration, press [#] button
within five (5) seconds and register a new fingerprint.
Page 21~22
Can not open a door
with the password
- Make sure if the password you try to enter is correct.
- The password can not be entered after the number pad
light turns off, press [¹] button and enter the password.
The number pad light will turn off and the number pad
cover will be shut if the number pad is not pressed
within 5 seconds.
Page 27
Can not open a door
using fingerprint
- Make sure if your fingerprint has been registered
properly. Otherwise, clean the fingerprint and place it
again.
- Place and hold the fingerprint on the reader for a
second.
Page 28
38
Password/Fingerprint
Problem
Checking point
Can not open a door
using password or
fingerprint
During the internal force lock mode, you cannot open the
door from the outside with passwords or fingerprint. If the
[Cover Open/Close] button is pressed or the fingerprint
reader cover is open, the alarm will sound.
Door is not open even
if the password and
fingerprint is verified.
Contact the A/S Center
Reference
Page 37
-
Automatic lock mode
Problem
Checking point
Reference
The door is not locked
automatically when it is
closed
- Check whether it is the automatic lock mode. During
the manual lock mode, if the inside [Open] button or
outside [Cover Open/Close] button is pressed, the door
will be locked.
- The door may not be locked on the automatic lock
mode if the door-lock installation is failed.
- If the battery is discharged, the automatic lock mode
can not work.
Page 31
Warning Alarm
Problem
Checking point
Warning alarm goes off
when the [Cover Open
/ Close] button is
pressed.
If the internal forced lock mode is selected, the alarm will
sound when the [Cover Open / Close] button is pressed.
Alarm sound goes off
when the door-lock is
operated
Low battery alarm will sound before the batteries are
completely discharged. Replace the batteries within a
week from the first low battery alarm.
Reference
Page 37
Page 14~15
39
Quick Manual
Function
Factory
default
Set or cancel
(Follow the sequence.)
Reset
(Password/Fingerprint/
Remote Controller)
-
Fingerprint
Password button simultaneously for 5 sec.
button
Current Password or ‘4560852580’
※After the reset, the password will be set ‘1234’ as a factory default.
Password
Registration/Change
Current
Password or
'1234'
Fingerprint Registration
N/A
Delete Fingerprint
N/A
Remote Controller
Registration
N/A
Delete Remote
Controller
N/A
Password button
Current Password +
button
New Password +
Password +
Fingerprint button
Password +
fingerprint
Place fingerprint again
Fingerprint button for 5 sec.
[Remote] button for 5 sec.
New
button
Place
button
Password +
[Remote] button
Password +
button on Remote Controller for 3 sec.
button
button
button
Password +
button
[OPEN]
button
-
[Open] button: Press the [Open] button.
Handlebar: pull down the handlebar on main body.
Remote controller: press [OPEN] button on the remote controller.
-
Automatic lock mode: the door is automatically locked when the
door is closed.
Manual lock mode: Press the inside [Open] button or [OPEN] button
of the remote controller
Open the door from
outside
-
Fingerprint : Open the fingerprint reader cover
Place a
fingerprint within 5 sec.
Password : [Cover Open/Close] button
Password + [¹] button
Emergency key: Insert the key into the keyhole, then turn it left or
right
Close the door from
outside
-
Automatic lock mode : the door is automatically locked when the
door is closed.
Manual lock mode : Press [Cover Open/Close] button.
Open the door from
inside
Close the door from
inside
40
Function
Automatic lock
mode setting
Manual lock mode
setting
Factory
default
Automatic
lock mode
Set or cancel
(Follow the sequence.)
Password button for 5 sec.
button
Password button for 5 sec.
button
Volume setting
8(medium)
Password button for 5 sec.
,
, or
+
button
Sound setting
2(sound on)
Password button for 5 sec.
,
, or
+
button
Arm security
-
button for 3 sec. when door is closed
Press
button
Disarm security
mode
-
Enter password or place fingerprint.
Turn off the
warning alarm from
inside
-
Remote,
Fingerprint and
Remote Control
Turn off the
warning alarm from
outside
-
Enter password or place a fingerprint.
Set internal forced
lock mode
-
Press the [Open] button longer than two seconds while the door is
locked.
Cancel internal
forced lock mode
-
Pull down the interior handlebar.
Password +
Password or [Open] button of
41
Product Specification
Article
Power
Specification
AA 1.5 V Battery (LR6) × 8 (6V)
Emergency Power
9V Battery (6LF22) × 1 (Separately purchase)
Operational System
Electronic control system (Password or Fingerprint reading)
Weight
Size
5.6kg (indoor and outdoor)
Outdoor
(With the handlebar)
82 mm(W)×330 mm(H)×75.3 mm(D)
Indoor
(With the handlebar)
82 mm(W)×330 mm(H)×82.5 mm(D)
Mortise
25 mm(W)×110 mm(H)×56 mm(D)
The content of the instruction manual may change to improve the product without
informing the customers.
Model Name
Wireless Equipment for Security
System
(SHS-DL22)
Certification No.
SCT-SHS-DL22
Certified Company
Seoul CommTech
Country
Korea
42
45