D-Link | DWS-3024L | User manual | L2+ Gigabit Wireless Switches
Add to my manuals5 Pages
The D-Link DWS-3024L is a powerful and versatile Gigabit switch that provides a comprehensive solution for businesses seeking to deploy a high-performance wired and wireless network. With 24 Gigabit ports, 4 SFP ports, and PoE+ support, the DWS-3024L offers flexible connectivity options for a wide range of devices, including wireless access points, IP cameras, and VoIP phones. Advanced features such as Layer 3 static routing, VLANs, and QoS ensure efficient network traffic management and optimization.
advertisement
▼
Scroll to page 2
of 5
DWS-3024 & DWS-3026 L2+ Gigabit Wireless Switches Centralized Management of Wireless Network + Tracks & Maintains User Authentication As Users Roam Throughout the Network +���������������������������������� Intelligently Designates Users to Virtual Groups Based on User’s Authenticated Identity +��������������������������������������� Provides Scaled, Resilient, Integrated Management Infrastructure +����������������������� Centrally Manages User Authentication/Security Policies +��������� Provides Key ������������������������ Management for Each Security Protocol +�������������������������������������� Configures and Controls All Connected Access Points Scalable Unified Wired / Wireless Network Architecture + 24 10/100/1000BASE-T Gigabit Ports +������������������������������������� Up to 48 Wireless AP Direct/Indirect Connections +�������������������������������� Mixed Wired/Wireless Connection From Any Port +������������������������������� 4 Combo SFP for Flexible Fiber Connection +��2 Open ��������������� Slots for Optional �������������������� 10-Gigabit Attachment to Fiber Backbone 1 +����������������������������� Expandable to 4 Peer Switches Simplified & Resilient Network Deployment + 802.3af Power Over Ethernet Simplifies AP Installation +������������������������������������ Gigabit Connection Ready for Future Wireless Speed Upgrade +������������������������������� Redundant Power Supply Support Maximizes Network Uptime Security Management + + + + + 64/128/152-Bit WEP Data Encryption WPA/WPA2 Personal WPA/WPA2 Enterprise MAC Address Filtering Rouge AP Classification & Detection The D-Link DWS-3024/DWS-3026 L2+ Gigabit Wireless Switches are optimized for wireless network deployment in business environments. With these devices, business can install high-performance, secure, manageable and scalable unified wired/wireless LAN switching. With combo SFP, open slots for optional 10-Gigabit connection 1, Power over Ethernet and redundant power supply (RPS) support, these Gigabit wireless switches provide enterprises with easy upgrade to next-generation 802.11n wireless LAN, simple deployment of wireless devices regardless of physical locations, and centralized management of secure wireless mobility and policy enforcement. Core Units Controlling Entire Wireless Network. The DWS-3024/DWS-3026 Gigabit Wireless Switches are core units that consolidate the security, manage the bandwidth and maintain the intelligence of the entire wireless network. In addition to monitoring users’ identities and maintaining their authentication as they roam, these wireless switches can configure and control all aspects of the wireless access points, including: RF channel and power management, wireless traffic segmentation, AP roaming and load balancing, rouge AP detection and AP access security. High Performance, Easy Deployment Designed for distributed deployments in the wiring closet, each wireless switch can support up to 48 wireless access points. AP connection can be directly to the wireless switch ports, or indirectly through a LAN switch. With 802.3af PoE integrated into every port, these switches allow connected AP to be located at places difficult to access from AC power sources. Gigabit transmission future-proof hardware investments when the network is installed with next-generation higher-speed 802.11n wireless standard devices. 24 Gigabit Ports, No Restriction on Port Usage Each DWS-3024/DWS-3026 provides 24 10/100/1000BASET Gigabit ports and 4 combo SFP. Each of the 10/100/1000BASE-T ports can connect to a wireless access point, or to a wired LAN device, such as a server, a network storage device, or simply another LAN switch. The combo SFP allows for flexible fiber connection, while optional 10Gigabit modules 1 enable bottleneck-free switch-to-switch cascading or attachment to a high-speed fiber backbone. Scalable Expansion & Unified Wired/Wireless Deployment Small to Medium Enterprises (SMB) may require only one wireless switch to manage a few AP or to use for mixed wired/wireless LAN purposes. When the number of AP is augmented, up to 4 switches can be added to form a large centralized management system. With easy expansion, Gigabit speed to support next-generation high-speed AP, and L3 routing to support enterprise-wide inter-subnet roaming, the DWS-3024/3026 provide an architecture that unifies and simplifies an otherwise complex WLAN environment, readily prepare an existing network for future technology upgrades. Authentication, Security & Power Management The DWS-3024/DWS-3026 provide user-based services such as virtual private group (SSID) membership, encryption type, authentication, location tracking and associated network statistics. Authorizations stay with users wherever they roam because all deployed DWS3024/DWS-3026 share stored information, ensuring secure access and connectivity to the right services. In addition to checking the identity of a connecting user from the switch’s local database, user authentication policies can be sent back to an external RADIUS server for complete verification. This offloading capability ensures that the wireless switch will not overload when clients are simultaneously connecting to the network. DWS-3024 & DWS-3026 L2+ Gigabit Wireless Switches Bandwidth & Power Management + + + + Auto-Adjusts RF Channels for AP Provides Fast Intra-Switch Roaming Advanced Inter-Subnet Roaming Auto-Adjusts Transmit Output Power for AP + Allows Remote Boot of AP LAN Management + L2+ Features: Spanning Tree, 802.3ad Link Aggregation, Port Mirroring, Jumbo Frames + IPv4 Packet Routing + QoS With 802.1p Priority Queues, Granular Bandwidth Control + LAN Security With ACL, RADIUS, TACACS+ Authentication, DoS Prevention, Broadcast Storm Control Secure & Versatile Management + + + + + Web Access Using HTTP Telnet Server/Client SSH v2, SSL v3 SNMP v1, v2c, v3, RMON SYSLOG, Dual Image 1 Available on DWS-3026 only. For power management, the DWS-3024/ DWS-3026 allow administrators to set the AP transmit output power to meet individual country regulations, and perform AP reboot from a remote place when required. Simplified Configuration & Deployment Through a centralized management platform, network maintenance and configuration become a more efficient process. If any access point were to fail, administrators can instantly identify the location of the failed AP and immediately swap it out with another AP. The DWS-3024/ DWS-3026 switches will automatically configure the new AP with the same configuration as the previous unit. Maximum Performance In addition to performing enhanced Layer 2+ forwarding, the DWS-3024/ DWS-3026 also provides Layer 3/4 and identity-tracking capabilities. Through centralized RF policies, auto-selection of the least utilized channels and AP load balancing, the DWS-3024/ DWS-3026 can effectively manage the wireless bandwidth to optimize WLAN traffic. Roaming across different AP is fast due to intra-switch roaming, inter-subnet roaming and the Gigabit speed transmission from the AP to the switch. These switches also offer resilient functions such as redundant load-sharing Gigabit links, 802.1q VLAN traffic segmentation, and IGMP snooping vital to supporting IP multicast streams. Maximum Network Protection Each client connecting to the wireless network goes through a strict authentication process to ensure maximum security. Whether the client is an assigned user, visiting guest, or just has department access, the DWS3024/ DWS-3026 protect the entire network infrastructure with its vast array of security protocols. These protocols include WPA/WPA2, 802.1x user authentication, and 802.11i standard security. Maximum Investment Protection With integrated Gigabit transmission, the DWS-3024/ DWS3026 provide enterprises with an easy upgrade to future speed wireless LAN technologies by incorporating nextgeneration high-speed AP. Optional 10-Gigabit support1 allows the network to integrate with future high-speed servers and the network backbone, further protecting current investments in network hardware. DWS-3024 & DWS-3026 L2+ Gigabit Wireless Switches Technical Specifications Device Interfaces + 24 10/100/1000BASE-T Gigabit Ports With Integrated 802.3af PoE +����������������� 4 Combo SFP Slots +������������������� RS-232 Console Port +��2 ��������������� Open Slots for ��������������������������� Optional 10-Gigabit Module 1 Redundant Power Supply + Connector for Optional External DPS-600 RPS Power over Ethernet +����������������� Standard: 802.3af +����������������� Per Port Voltage �������������� Output: 15.4 W +�������������� Total Voltage ������������� Output: 370 W +����������������������������� Auto Disable If Port Current ���������� Over 350mA Performance + Switch Capacity: DWS-3024: 48Gbps DWS-3026: 88Gbps + Maximum Forwarding Rate: DWS-3024: 35.71Mpps DWS-3026: 65.47Mpps + Switching Method: Store and Forward + Packet Buffer Memory Size: 750KBytes Flow Control + 802.3x Standard in Full Duplex Mode +��������������������������������� Back Pressure in Half Duplex Mode Optional 10-Gigabit Uplink Modules 1 + DEM-410X 1-Slot 10-Gigabit XFP Module (For Fiber Backbone Attachment) + DEM-410CX 1-Port 10-Gigabit CX4 Module (For Switch Cascading) Optional 10-Gigabit XFP Transceivers 1 +������������������������� DEM-421XT XFP Transceiver �������������������������������������������������������������������� (10GBASE-SR Standard, Up to 300 m Multi-Mode Fiber Distance, 3.3/5V Operating ������������������ Voltage) +������������������������� DEM-422XT XFP Transceiver ��������������������������������������������������������������������� (10GBASE-LR Standard, Up to 10 km Single-Mode Fiber Distance, 3.3/5V Operating ������������������ Voltage) +������������������������� DEM-423XT XFP Transceiver ���������������������������������������������������������������������� (10GBASE-ER Standard, Up to 40 km Single-Mode Fiber. Distance, 3.3/5V ������������������ Operating Voltage) WLAN Management Capability +���������������������������������������������������������������������������� Up to 48 AP (Directly Connected and Indirectly Connected Through LAN Switch) +������������������������ Up to 512 Wireless Users Roaming +������������ Fast Roaming +�������������������� Intra-Switch Roaming +�������������������� Inter-Subnet Roaming Access Control & Bandwidth Management +��������������������������������������������������� Up to 16 SSID per AP (8 SSID per RF Frequency Band) +����������������� AP Load Balancing AP Management + AP Auto-Discovery + Remote AP Reboot + AP Monitoring: List Managed AP, Rogue AP, Authentication Failed AP + Client Monitoring: List Clients Associated with Each Managed AP + Ad-hoc Clients Monitoring + AP Authentication Supporting Local Database and External RADIUS Server + Centralized RF/Security Policy Management DWS-3024 & DWS-3026 L2+ Gigabit Wireless Switches WLAN Security + WPA Personal/Enterprise + WPA2 Personal/Enterprise + 64/128/152-bit WEP Data Encryption + Wireless Station and AP Classification Based on RF Channel, MAC Address, SSID, Time + Rogue and Valid AP Classification Based on MAC Address + Encryption Type Support: WEP, WPA, Dynamic WEP, TKIP, AES-CCMP, EAP-TLS, TTLS, PEAP-GTC, PEAP-MS-CHAPv2, EAP-FAST L2 Features + MAC Address Table Size: 8K Entries + IGMP Snooping: 1K Multicast Groups + Spanning Tree: 8021.D Spanning Tree 802.1w Rapid Spanning Tree 802.1s Multiple Spanning Tree + 802.3ad Link Aggregation: Up to 32 Groups Up to 8 Ports per Group + Port Mirroring: One-to-One Port Mirroring Many to One Port Mirroring + Jumbo Frame Size: Up to 9KBytes VLAN + 802.1Q VLAN Tagging + VLAN Groups: Up to 3965 + GVRP L3 Features + IPv4 Static Route + Routing Table Size: Up to 128 Static Routes + Floating Static Route + VRRP Quality of Service + 802.1p Priority Queues (Up to 8 Queues per Port) + CoS Based on: Switch Port, VLAN, DSCP, TCP/UDP Port, TOS, Destination/Source MAC Address, Destination/Source IP Address + Bandwidth Control: Granularity of one percent link speed. ACL (Access Control List) ACL Based on: Switch Port, MAC Address, 802.1p Priority Queues, VLAN, Ethertype, DSCP, IP Address, Protocol Type, TCP/UDP Port LAN Security + RADIUS Authentication for Management Access + TACACS+ Authentication for Management Access + SSH v1, v2 + SSL v3 + Port Security: 20 MAC Addresses per Port Trap Violation Notification + 802.1x Port-Based Access Control + Denial of Service Protection + Broadcast Storm Control: Granularity of one percent link speed. Management Methods + Web-Based GUI + Telnet Server: Up to 5 Sessions + TFTP Client + Multiple Configuration Files + BOOTP/DHCP Client + SNTP + Dual Images + CLI + Telnet Client + SNMP v1, v2c, v3 + RMON v1: 4 Groups (Statistics, History, Alarms, Events) + DHCP Server + SYSLOG DWS-3024 & DWS-3026 L2+ Gigabit Wireless Switches Diagnostic LEDs + Per Device: Power, Console, RPS + Per 10/100/1000BASE-T Port: Link/Activity/Speed, PoE Mode + Per SFP Slot: Link/Activity + Per 10-Gigabit Slot: Link/Activity 1 Power + AC Input Power: 100 to240 VAC, 50/60 Hz Internal Universal Power Supply + Power Consumption: + DWS-3024: 450 Watts (max. with all PoE ports in operation) + DWS-3026: 460 Watts (max. with all PoE ports in operation) Heat Dissipation + Heat Dissipation: DWS-3024: 1535.49 BTU/hr DWS-3026: 1569.61 BTU/hr - Ventilation DC Fans: DWS-3024: 4 40 x 40 mm DC Fans DWS-3026: 4 40 x 40 mm DC Fans Dimensions + 440 (W) x 389 (D) x 44 (H) mm (17.32 x 15.31x 1.73 inches) + 19-Inch Standard Equipment Rack Mount Width, 1U Height Weight + DWS-3024: 6kg (13.23 lbs) + DWS-3026: 6kg (13.23 lbs) Temperature +Operating Temperature: 0° to 40° C (32° to 104° F) + Storage Temperature: -10° to 70° C (14° to 158° F) Humidity +Operating Humidity: 10% to 90% non-condensing + Storage Humidity: 5% to 90% non-condensing EMI/EMC Certification + FCC Class A + VCCI + C-Tick + ICES-003 + CE Safety Certification + UL/cUL + CB 1 Applicable to DWS-3026 switch only. ACN 052 202 838 D-Link Worldwide Offices U.S.A. TEL: 1-800-326-1688 FAX: 1-866-743-4905 Spain TEL: 34-93-4090770 Turkey TEL: 90-312-473-40-55 Canada TEL: 1-905-8295033 FAX: 1-905-8295223 Portugal TEL: 351-21-8688493 FAX: 34-93-4910795 Egypt TEL: 202-291-9035 FAX: 90-312-473-40-58 FAX: 202-291-9051 Europe (U. K.) TEL: 44-20-8955-9000 FAX: 44-20-8955-9001 Czech Republic TEL: 420-(603)-276-589 Israel TEL: 972-9-9715700 FAX: 972-9-9715601 Germany TEL: 49-6196-77990 FAX: 49-6196-7799300 Switzerland TEL: 41-(0)-1-832-11-00 FAX: 41(0)-1-832-11-01 LatinAmerica TEL: 56-2-232-3185 FAX: 56-2-232-0923 France TEL: 33-1-30238688 FAX: 33-1-30238689 Greece TEL: 30-210-9914 512 FAX: 30-210-9916902 Brazil TEL: 55-11-218-59300 FAX: 55-11-218-59322 Netherlands TEL: 31-10-282-1445 FAX: 31-10-282-1331 Luxemburg TEL: 32-(0)2-517-7111 FAX: 32-(0)2-517-6500 South Africa TEL: 27-12-665-2165 FAX: 27-12-665-2186 Belgium TEL: 32(0)2-517-7111 FAX: 32(0)2-517-6500 Poland TEL: 48-(0)-22-583-92-75 FAX: 48-(0)-22-583-92-76 Russia TEL: 7-495-744-0099 FAX: 7-495-744-0099 #350 Italy TEL: 39-02-2900-0676 FAX: 39-02-2900-1723 Hungary TEL: 36-(0)-1-461-30-00 FAX: 36-(0)-1-461-30-09 Japan TEL: 81-3-5781-0963 FAX: 81-3-5781-0965 Sweden TEL: 46-(0)8564-61900 FAX: 46-(0)8564-61901 Singapore TEL: 65-6774-6233 FAX: 65-6774-6322 China TEL: 86-10-58635800 FAX: 86-10-58635799 Denmark TEL: 45-43-969040 FAX: 45-43-424347 Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 Taiwan TEL: 886-2-6600-0123 FAX: 886-2-6600-8168 Norway TEL: 47-99-300-100 FAX: 47-22-309580 India TEL: 91-022-26526696 FAX: 91-022-26528914 Headquarters TEL: 886-2-6600-0123 FAX: 886-2-6600-9898 Finland TEL: 358-9-2707 5080 FAX: 358-9-2707-5081 Middle East (Dubai) TEL: 971-4-3916480 FAX: 971-4-3908881 Specifications subject to change without prior notice. D-Link is a registered trademark and AirPremier is a trademark of D-Link Corporation/D-Link System Inc. All other trademarks belong to their proprietors. Release 03 (Feb. 2007)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Managed
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 24 Console port: RS-232
- Power over Ethernet (PoE)