- No category
advertisement
CabRunner
®
Overhead Cable Routing System
SPECIFICATION SHEET s p e c i f i c a t i o n s
The overhead cable routing system shall provide a high capacity data cable pathway directly over Panduit ® Net-Access ™ Switch and Server Cabinets with or without vertical exhaust duct. Modular base components shall be molded from a rigid, non-metallic material and provide a smooth pathway for cables. The base units shall have 6" (150mm) high sidewalls to contain cables and shall have integral spill-outs that align with the cable inlets on the cabinet to provide 3" (75mm) bend radius control. Bases shall attach directly to the top of Net-Access ™ Cabinets with minimum fasteners. An optional molded, snap-in bridge insert shall provide support for cables passing over unused spill-outs, while also allowing for the 3" (75mm) bend radius to be maintained when cables are routed into an adjacent cabinet. An optional trapeze bracket shall enable the integration of a secondary overhead cable pathway for fiber optic cables. The system shall complement the aesthetics of Net-Access ™ Cabinets once installed.
t e c h n i c a l i n f o r m a t i o n
“X”
Material:
Flammability:
“Y”
ABS, Steel
UL94-HB
Internal Area in 2
Cat. 6A
7.62mm Dia.
0.3" Dia.
Fill “X” “Y”
CRB6BL – CabRunner ® Net Access ™ Base
40%
50%
60%
35"
35"
35"
6"
6"
6"
208.94
208.94
208.94
1182
1478
1774
Cat. 6
6.35mm Dia
0.25" Dia.
1703
2128
2554
CRB6VEDBL – CabRunner ® Net Access ™ Vertical Exhaust Duct Base
40%
50%
60%
25.2"
25.2"
25.2"
6"
6"
6"
151.2
151.2
151.2
854
1068
1282
1230
1538
1846 k e y f e a t u r e s a n d b e n e f i t s
2 piece molded design
Integral 6" (150mm) high sidewalls
Decorative shroud
Integral 3" (75mm) bend radius control
Large cable routing area
Multiple cable spill-outs
Bridge insert (optional)
Integral screw mounting bosses
Trapeze brackets (optional)
Provides self-supporting base eliminating need of secondary infrastructure; requires minimal components for quick installation
Contains high capacity cables and eliminates the need to lash bundles for faster installation
Complements the look of the Net-Access ™ Cabinet to enhance data center aesthetics
Protects cables from physical damage improving network reliability
Maximizes space utilization above the cabinets reducing cost of ownership
Allows cables to be routed into the front, middle, or rear of the
Net-Access ™ Cabinet for increased versatility
Supports cables passing over unused cable inlets minimizing damage to cables and improving network reliability
Provides a secure mounting method with minimum use of tools and loose fasteners for faster implementation
Enables simple integration of FiberRunner ® Cable Routing
System for fiber optic cables to speed implementation and provide greater system flexibility a p p l i c a t i o n s
The CabRunner ® Overhead Cable Routing System is a data center infrastructure pathway designed to route and manage high capacities of data cables directly over the Panduit ® Net-Access ™ Switch and
Server Cabinets with or without vertical exhaust duct.
Rugged construction ensures a solid pathway that supports and physically protects cables improving network reliability. The clean, simple design complements Net-Access ™ Cabinets providing greater data center aesthetics. It is optimized to support high performance copper data cables routed between the main distribution area (MDA), horizontal distribution area (HDA), and the equipment distribution area (EDA).
w w w. p a n d u i t . c o m
CabRunner ® Overhead Cable
Routing System
Base unit:
VED base unit:
Bridge insert:
Trapeze bracket:
VED trapeze bracket:
Net-Access ™ Switch Cabinets
CRB6BL
CRB6VEDBL
CRBRDGBL
CRTB
CRVEDTB
Includes cable management, threaded rails, doors, and side panels:
Includes cable management, threaded rails, and doors:
Includes cable management and threaded rails:
CN1
CN2
CN3
Net-Access ™ Server Cabinets
Includes cable management, POU brackets, cage nut rails, doors, and side panels:
Includes cable management, POU brackets, cage nut rails, and doors:
Includes cable management, POU brackets, and cage nut rails:
CS1
CS2
CS3
Net-Access ™ Vertical Exhaust
System Kits
Vertical extender: CVED32
Variable duct
42-70" (1068-1778mm): CVED32VE
Variable short duct
20-36" (508-914mm): CVED32VES
*For additional information on Net-Access ™
Cabinets, refer to brochure SA-RKCB14.
CabRunner
®
Overhead Cable Routing System
1
2
3
7
4
1 Base Unit – CRB6BL 2 Base for Net-Access ™
Vertical Exhaust Duct –
CRB6VEDBL
6
5
8
3 Bridge Insert – CRBRDGBL 4 Trapeze Bracket – CRTB
5 Trapeze Bracket for Net-Access ™
Vertical Exhaust Duct – CRVEDTB
6 FiberRunner ® System* –
FR6X4YL6
FiberRunner
®
Cable Routing System mounted to
CabRunner
®
Overhead Cable Routing System with optional trapeze brackets.
7 Net-Access ™
Switch Cabinet* – CN1
8 Net-Access ™
Server Cabinet* – CS1
*For the FiberRunner ® Routing System and Net-Access ™ www.panduit.com for more information.
Cabinets, refer to Physical Infrastructure Solutions Catalog, SA-NCCB51 or
PANDUIT CANADA
Markham, Ontario [email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK [email protected]
Phone: 44.20.8601.7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore [email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan [email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Jalisco, Mexico [email protected]
Phone: 52.33.3777.6000
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800-777-3300 and reference FRSP09
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia [email protected]
Phone: 61.3.9794.9020
© 2010 Panduit Corp.
ALL RIGHTS RESERVED.
WW-FRSP09
5/2010
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement