Zanussi ZIE6004F User manual

EN
User manual
Ceramic glass induction hob
ZIE6004F
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
3
6
7
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Subject to change without notice
Safety information
For your safety and correct operation of the appliance, read this manual carefully before installation
and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know
the operation and safety features of the appliance.
General safety
Warning! Persons (including children) with
reduced physical sensory, mental capabilities or
lack of experience and knowledge must not use the
appliance. They must have supervision or instruction
for the operation of the appliance by a person
responsible for their safety.
Child safety
• Only adults can use this appliance. Children must
get supervision to make sure that they do not play
with the appliance.
• Keep all packaging away from children. There is a
risk of suffocation.
• Keep children away from the appliance when it is on.
Safety during operation
• Remove all packaging, stickers and layers from the
appliance before the first use.
• Set the cooking zones to "off" after each use.
• Risk of burns! Do not put metallic objects, for example cutlery or saucepan lids, on the cooking surface,
as they can become hot.
• Users with an implanted pacemaker must keep their
upper body minimum 30 cm from induction cooking
zones that are switched on.
Warning! Fire danger! Overheated fats and oils
can catch fire very quickly.
2
Correct operation
•
•
•
•
Always monitor the appliance during operation.
Only use the appliance for domestic cooking tasks!
Do not use the appliance as a work or a storage surface.
Do not put or keep very flammable liquids and materials, or fusible objects (made of plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the
near sockets. Do not let electricity bonds touch the
appliance or hot cookware. Do not let electricity
bonds tangle.
How to prevent a damage to the appliance
• If the objects or cookware fall on the glass ceramic,
the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with
damaged bottoms can scratch the glass ceramic if
you move them on the surface.
• Do not let cookware boil dry to prevent the damage
to cookware and glass ceramics.
• Do not use the cooking zones with empty cookware
or without cookware.
• Do not cover the parts of the appliance with aluminium foil.
• Leave a ventilation space of 5 mm between the worktop and front of the unit below it.
Warning! If there is a crack on the surface,
disconnect power supply to prevent the electric
shock.
Installation instructions
Before the installation , note down the serial number (Ser. Nr.) from the rating plate. The rating
plate of the appliance is on its lower casing.
ZANUSSI
942 116 604
ZIE6004F
55 GAD D5 AU
50
220-240 V
220-240 V
6.9 kW
Induction 6.9 kW
Safety instructions
Warning! You must read these!
Make sure that the appliance is not damaged
because of transportation. Do not connect a damaged
appliance. If it is necessary, speak to the supplier.
Only an authorised service technician can install,
connect or repair this appliance. Use only original spare
parts.
Only use built-in appliances after you assemble the
appliance into correct built-in units and work surfaces
that align to the standards.
Do not change the specifications or modify this
product. Risk of injury and damage to the appliance.
Fully obey the laws, ordinances, directives and
standards in force in the country where you use the
appliance (safety regulations, recycling regulations,
electrical safety rules etc.)!
Keep the minimum distances to other appliances and
units!
Install anti-shock protection, for example install the
drawers only with a protective floor directly below the
appliance!
Protect the cut surfaces of the worktop against moisture
with a correct sealant!
Seal the appliance to the work top with no space left
with a correct sealant!
Protect the bottom of the appliance from steam and
moisture, e.g. from a dishwasher or oven!
Do not install the appliance adjacent to doors and
below windows! If not, hot cookware can be hit off the
hob when you open doors or windows.
Warning! Risk of injury from electrical current.
Carefully obey the instructions for electrical
connections.
•
•
•
•
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Install correctly to give anti-shock protection.
Loose and incorrect plug and socket connections
can make the terminal become too hot.
• A qualified electrician must install the clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single-phase or two-phase connection.
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or higher). Speak
your local Service Force Centre.
The appliance must have the electrical installation
which lets you disconnect the appliance from the mains
at all poles with a contact opening width of minimum 3
mm.
You must have correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
3
Assembly
min. 500 mm
min.
50 mm
min.
50 mm
min.
5 mm
1
4
2
R 5mm
600mm
=
490+1mm
560+1mm
=
min.
25 mm
min.
20 mm
min.
5 mm
min.
38 mm
min.
5 mm
5
Product description
Cooking surface layout
1
2
145
180
mm
1
2
3
4
5
mm
210
145
5
4
3
mm
mm
Single cooking zone 1400 W
Single cooking zone 1800 W
Single cooking zone 1400 W
Control panel
Single cooking zone 2300 W
Control panel layout
1
2
3
Use the sensor fields to operate the appliance. Indicators and displays tell which
functions operate.
sensor field
function
starts and stops the hob
1
heat setting display
2
3
shows the heat setting or functions which are on
increases or decreases the heat settings
/
Heat setting displays
Display
Description
The cooking zone is off
-
The cooking zone operates
There is a malfunction
6
Display
Description
A cooking zone is still hot (residual heat)
The automatic switch off is active
Cookware unsuitable or too small or no cookware on the cooking zone
Residual heat indicator
Warning!
The induction cooking zones make the heat directly in
the bottom of the cookware. The glass ceramic is heated
by the residual heat of the cookware.
Risk of burns from residual heat!
Operating instructions
• the hob gets too hot (e.g. when a saucepan boils
dry). Before you use the hob again, the cooking zone
must be cool.
• you use incorrect cookware.
comes on in the display and after 2 minutes the cooking zone stops automatically.
• you do not stop a cooking zone or change the heat
comes on and the hob
setting. After some time
stops. See the table.
Use the induction cooking zones with suitable cookware.
On and Off
Touch
for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
.
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a
cloth, etc.) for longer than 10 seconds.
Automatic Switch Off times
Heat setting
Stops after
6 hours
-
-
5 hours
The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. The display shows the heat set-
4 hours
ting. Touch
and
the cooking zone.
1.5 hours
at the same time to switch off
Helpful hints and tips
Cookware
Cookware for induction cooking zones
• The bottom of the cookware must be as thick
and flat as possible.
• Cookware made of enamelled steel and with aluminium or copper bottoms can cause discoloration on
glass ceramic surface.
Important! In induction cooking a powerful
electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless
steel, a multi-layer bottom (marked as correct by a
manufacturer).
7
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the
highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
Energy saving
The bottom of the cookware must be as thick and
flat as possible.
Cookware dimensions : induction cooking zones adapt
to the dimension of the bottom of the cookware automatically to some limit. But, the magnetic part of the bottom of the cookware must have a minimum diameter of
approximately 3/4 of the cooking zones.
• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you
start it.
• Stop the cooking zones before the end of the cooking
time to use residual heat.
• The bottom of pans and cooking zones must have
the same dimension.
Operating noises
Examples of cooking applications
If you can hear
• cracking noise: cookware is made of different materials (Sandwich construction).
• whistling: you use one or more cooking zones with
high power levels and the cookware is made of different materials (Sandwich construction).
Heat
setting
Use to:
The data in the table is for guidance only.
Time
1
Keep cooked foods warm
1-2
Hollandaise sauce, melt: butter, chocolate, ge- 5-25 min
latine
Mix occasionally
1-2
Solidify: fluffy omelettes, baked eggs
10-40
min
Cook with a lid on
2-3
Simmer rice and milkbased dishes, heating
up ready-cooked meals
25-50
min
Add at least twice as much liquid as rice,
stir milk dishes part way through
3-4
Steam vegetables, fish, meat
20-45
min
Add a few tablespoons of liquid
4-5
Steam potatoes
20-60
min
Use max. ¼ l water for 750 g of potatoes
4-5
Cook larger quantities of food, stews and soups 60-150
min
Up to 3 l liquid plus ingredients
6-7
Gentle fry: escalope, veal cordon bleu, cutas relets, rissoles, sausages, liver, roux, eggs, pan- quired
cakes, doughnuts
Turn halfway through
7-8
Heavy fry, hash browns, loin steaks, steaks
Turn halfway through
9
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips
8
as required
Hints
5-15 min
Cover
Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one which
contains starch), acrylamides can pose a health risk.
Thus, we recommend that you cook at the lowest
temperatures and do not brown food too much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic
have no effect on how the appliance operates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil,
and food with sugar. If not, the dirt can cause
damage to the appliance. Use a special scraper
for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the
surface .
– Remove after the appliance is sufficiently cool:
limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent
for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
What to do if…
Problem
Possible cause and remedy
You cannot start the appliance or op- • You touched 2 or more sensor fields at the same time. Only touch one
erate it.
sensor field.
• There is water or fat stains on the control panel. Clean the control panel
• Start the appliance again and set the heat setting within 10 seconds.
The residual heat indicator does not
come on.
The cooking zone is not hot because it operated only for a short time. If
the cooking zone must be hot, speak to the after sales service.
The appliance stops.
You covered
. Uncover the sensor field.
comes on
• Not correct cookware. Use the correct cookware.
• No cookware on the cooking zone. Put cookware on the cooking zone.
• The diameter of the bottom of the cookware is too small for the cooking
zone. Move cookware to a smaller cooking zone.
comes on.
• The automatic switch-off operates. Stop the appliance and start it again.
Overheating protection for the cooking zone operates. Stop the cooking
zone and start it again.
and a number come on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect again. If
comes on again, speak to the After Sales Service.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the Customer Care Department. Give the data from the rating plate, three-digit-
letter code for the glass ceramic (it is in the corner of
the cooking surface) and an error message that comes on.
9
If you operated the appliance incorrectly, the servicing
by a customer service technician or dealer will not be
free of charge, even during the warranty period. The in-
structions about the customer service and conditions of
guarantee are in the guarantee booklet.
Environment concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
10
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the
waste disposal facilities in your municipality.
11
892933204-C-292010
www.zanussi.com/shop