advertisement
TopPage
LC-32/37D43U
SERVICE MANUAL
No. SX6Y9LC37D43U
LCD COLOR TELEVISION
MODELS
LC-32D43U
LC-37D43U
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified be used.
OUTLINE
This model is based on the LC-32D42U/LC-37D42U and partially modified.
For the contents not covered in this Service Manual, accordingly, please refer to the LC-32D42U/LC-
37D42U (S06X9LC32D42U) Service Manual.
CONTENTS
LIST OF CHANGED PARTS ............................. i
CAUTION ......................................................... ii
PRECAUTIONS A PRENDRE LORS DE
LA REPARATION .............................................iii
PRECAUTIONS FOR USING LEAD-
FREE SOLDER ............................................... iv
[1] SPECIFICATIONS.........................................1-1
[1] DIMENSIONS .................................................3-1
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only.
The contents are subject to change without notice.
LC-32/37D43U
DIFFERENCES FROM BASE MODEL
LIST OF CHANGED PARTS
Ref. No.
Description
PRINTED WIRING BOARD ASSEMBLIES
LC-32D42U/LC-37D42U LC-32D43U/LC-37D43U Note
AV TERMINAL Unit
POWER Unit
DUNTKD999FM04
RDENCA198WJQZ
DUNTKD999FM04
RDENCA198WJQZ
No Changes
No Changes
Refer to the PARTS GUIDE for CABINET PARTS, SUPPLIED ACCESORIES,PACKING PARTS and SERVICE JIGS.
i
LC-32/37D43U
Service Manual
IMPORTANT SERVICE SAFETY PRECAUTION
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow:
WARNING
1. For continued safety, no modification of any circuit should be attempted.
2. Disconnect AC power before servicing.
A V
C A U T I O N : F O R C O N T I N U E D
PROTECTION AGAINST A RISK OF
FIRE REPLACE ONLY WITH SAME
TYPE FUSE.
F701 (125V 8A),
F4701, F5701 (250V 3A ~ 115 O C)
• Use an AC voltmeter having with 5000 ohm per volt, or higher, sensitivity or measure the AC voltage drop across the resistor.
• Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor.
All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must be used only for the purpose of completing these checks.)
Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the monitor to the owner.
DVM
AC SCALE
BEFORE RETURNING THE RECEIVER (Fire &
Shock Hazard)
Before returning the receiver to the user, perform the following safety checks:
3. Inspect all lead dress to make certain that leads are not pinched, and check that hardware is not lodged between the chassis and other metal parts in the receiver.
4. Inspect all protective devices such as non-metallic control knobs, insulation materials, cabinet backs, adjustment and compartment covers or shields, isolation resistor-capacitor networks, mechanical insulators, etc.
1.5k ohm
10W
0.15
µF
TEST PROBE
5. To be sure that no shock hazard exists, check for leakage current in the following manner.
• Plug the AC cord directly into a 120 volt AC outlet.
TO EXPOSED
METAL PARTS
CONNECT TO
KNOWN EARTH
GROUND
• Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15
µF capacitor in series with all exposed metal cabinet parts and a known earth ground, such as electrical conduit or electrical ground connected to an earth ground.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have special safety-related characteristics.
These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc.
For continued protection, replacement parts must be identical to those used in the original circuit.
The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards.
Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by " " and shaded areas in the Replacement Parts List and Schematic Diagrams.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// ii
LC-32/37D43U
PRECAUTIONS A PRENDRE LORS DE LA REP-
ARATION
Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants.
AVERTISSEMENT
1.
N'entreprendre aucune modification de tout circuit. C'est dangereux.
2.
Débrancher le récepteur avant toute réparation.
A V
PRECAUTION : POUR LA PRO-
T E C T I O N C O N T I N U E C O N T R E
LES RISQUES D'INCENDIE, RE-
MPLACER LE FUSIBLE
F701 (125V 8A),
F4701, F5701 (250V 3A ~ 115 O C)
VERIFICATIONS CONTRE L'INCEN-DIE ET LE
CHOC ELECTRIQUE
Avant de rendre le récepteur à l'utilisateur, effectuer les vérifications suivantes.
3.
Inspecter tous les faisceaux de câbles pour s'assurer que les fils ne soient pas pincés ou qu'un outil ne soit pas placé entre le châssis et les autres pièces métalliques du récepteur.
4.
Inspecter tous les dispositifs de protection comme les boutons de commande non-métalliques, les isolants, le dos du coffret, les couvercles ou blindages de réglage et de compartiment, les réseaux de résistancecapacité, les isolateurs mécaniques, etc.
5.
S'assurer qu'il n'y ait pas de danger d'électrocution en vérifiant la fuite de courant, de la facon suivante:
• Brancher le cordon d'alimentation directem-ent à une prise de courant de 120V. (Ne pas utiliser de transformateur d'isolation pour cet essai).
• A l'aide de deux fils à pinces, brancher une résistance de 1.5 k
10 watts en parallèle avec un condensateur de 0.15
µF en série avec toutes les pièces métalliques exposées du coffret et une terre connue comme une conduite électrique ou une prise de terre branchée à la terre.
• Utiliser un voltmètre CA d'une sensibilité d'au moins 5000 /V pour mesurer la chute de tension en travers de la résistance.
• Toucher avec la sonde d'essai les pièces métalliques exposées qui présentent une voie de retour au châssis (antenne, coffret métallique, tête des vis, arbres de commande et des boutons, écusson, etc.) et mesurer la chute de tension CA en-travers de la résistance.
Toutes les vérifications doivent être refaites après avoir inversé la fiche du cordon d'alimentation. (Si nécessaire, une prise d'adpatation non polarisée peut être utilisée dans le but de terminer ces vérifications.)
La tension de pointe mesurèe ne doit pas dépasser 0.75V (correspondante au courant CA de pointe de 0.5mA).
Dans le cas contraire, il y a une possibilité de choc électrique qui doit être supprimée avant de rendre le récepteur au client.
DVM
ECHELLE CA
1.5k ohm
10W
0.15 µF
SONDE D'ESSAI
AUX PIECES
METALLIQUES
EXPOSEES
BRANCHER A UNE
TERRE CONNUE
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
AVIS POUR LA SECURITE
De nombreuses pièces, électriques et mécaniques, dans les téléviseur ACL présentent des caractéristiques spéciales relatives à la sécurité, qui ne sont souvent pas évidentes à vue. Le degré de protection ne peut pas être nécessairement augmentée en utilisant des pièces de remplacement étalonnées pour haute tension, puissance, etc.
Les pièces de remplacement qui présentent ces caractéristiques sont identifiées dans ce manuel; les pièces électriques qui présentent ces particularités sont identifiées par la marque " " et hachurées dans la liste des pièces de remplacement et les diagrammes schématiques.
Pour assurer la protection, ces pièces doivent être identiques à celles utilisées dans le circuit d'origine. L'utilisation de pièces qui n'ont pas les mêmes caractéristiques que les pièces recommandées par l'usine, indiquées dans ce manuel, peut provoquer des électrocutions, incendies, radiations X ou autres accidents.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
iii
LC-32/37D43U
PRECAUTIONS FOR USING LEAD-FREE SOL-
DER
Employing lead-free solder
• “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
Example:
Indicates lead-free solder of tin, silver and copper.
Indicates lead-free solder of tin, silver and copper.
Using lead-free wire solder
• When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause damage or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 °C, we recommend you to use a dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.
Soldering
• As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 °C which is higher than the conventional lead solder by 40 °C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
• Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
PARTS CODE
ZHNDAi123250E
ZHNDAi126500E
ZHNDAi12801KE
PRICE
RANK
BL
BK
BM
PART
DELIVERY
J
J
J
DESCRIPTION
φ0.3mm 250g (1roll)
φ0.6mm 500g (1roll)
φ1.0mm 1kg (1roll) iv
LC-32/37D43U
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS
Service Manual
Item Model: LC-32D43U Model: LC-37D43U
LCD panel 32 Advanced Super View & BLACK TFT
LCD
37 Advanced Super View & BLACK TFT
LCD
3,147,264 dots (1366 768 3 dots) Number of dots
TV
Function
TV-standard (CCIR)
Receiving
Channel
VHF/UHF
CATV
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
1-135ch (non-scrambled channel only)
Digital Terrestrial
Broadcast (8VSB)
Digital cable
*1
(64/256 QAM)
2-69ch
1-135ch (non-scrambled channel only)
Audio multiplex BTSC System
Audio out
Terminals Rear INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
10W 2
AV in, COMPONENT in
S-VIDEO in, AV in
Audio in, COMPONENT in
HDMI in with HDCP
Audio in, HDMI in with HDCP
15 pin mini D-sub, Audio in (Ø 3.5 mm jack)
ANTENNA 75 Unbalance, F Type 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
DIGITAL AUDIO OUTPUT Optical Digital audio output 1 (PCM/Dolby Digital)
OSD language
Power Requirement
OUTPUT Audio out
English/French/Spanish
AC 120 V, 60 Hz
Power Consumption w/o stand
Weight with stand w/o stand
Dimension
*2
(W H D) with stand
Operating temperature
175 W (0.95 W Standby with AC 120V)
36.4 lbs./16.5 kg
43.0 lbs./19.5 kg
31
11
/
32
20
59
/
64
3
53
/
64 inch
31
11
/
32
23
13
/
64
9
37
/
64 inch
32°F to 104°F (0°C to 40°C)
185 W (0.95 W Standby with AC 120V)
43.0 lbs./19.5 kg
50.7 lbs./23.0 kg
35
61
/
64
23
37
/
64
35
61
/
64
25
27
/
32
3
53
/
64
11
35
/
64 inch inch
*1
*2
Emergency alert messages via Cable are unreceivable.
The dimensional drawings are shown on the inside back cover.
improvement without prior notice. The performance specication gures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
1 – 1
LC-32/37D43U
CHAPTER 2. OPERATION MANUAL
[1] OPERATION MANUAL
Part names
TV (Front)
Remote control sensor
OPC sensor*
NOTE
*OPC: Optical Picture Control
TV (Rear)
OPC indicator*
SLEEP indicator
POWER indicator
HDMI terminal (INPUT 4)
HDMI terminal (INPUT 5)
PC IN terminals (INPUT 6)
Antenna/Cable in
AUDIO terminals (INPUT 5)
DIGITAL AUDIO OUTPUT terminal
INPUT 3 terminals
INPUT 2 terminals
INPUT 1 terminals
AUDIO OUTPUT terminals
Channel buttons
(CH / )
Volume buttons
(VOL / + )
INPUT button
POWER button
AC INPUT terminal
2 – 1
LC-32/37D43U
Part names
Remote control unit
5
8
9
10
6
7
11
2
3
4
12
13
1 14
17
18
19
20
21
22
23
24
25
26
27
15
16
1 TV POWER: Switch the TV power on or enters standby mode.
2 DISPLAY: Display the channel information.
3 SOURCE POWER: Turns the power of the external equipment on and off.
4 External equipment operational buttons: Operate the external equipment.
5 0 – 9: Set the channel.
6 • (DOT):
7 INPUT: Select a TV input source. (TV, INPUT 1,
INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6)
8 VOL / : Set the volume.
9 SURROUND: Select Surround settings.
10 FREEZE: Set the still image. Press again to return to normal screen.
11 EXIT: Turn off the menu screen.
12 SLEEP: Set the sleep timer.
13 AUDIO: Selects the MTS/SAP or the audio mode during multi-channel audio broadcasts.
14 FUNCTION: Switches the remote control for TV,
CBL/SAT, VCR, DVD and AUDIO operation. Indicator lights up for the current mode.
* To enter the code registration mode, you need to press FUNCTION and DISPLAY at the same time.
15 LIGHT : When pressed all buttons on the remote control unit will light. The lighting will turn off if no operations are performed within about 5 seconds.
This button is used for performing operations in lowlight situations.
16 VIEW MODE: Select the screen size.
17 ENT: Jumps to a channel after selecting with the 0–9 buttons.
18 FLASHBACK: Return to the previous channel or external input mode.
19 CH : Select the channel.
20 MUTE: Mute the sound.
21 MENU: Display the menu screen.
22 ENTER: Select a desired item on the screen.
23 RETURN: Return to the previous menu screen.
24 FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4 different categories.
While watching, you can toggle the selected channels by pressing A, B, C and D.
25 FAVORITE: Register favorite channel.
26 CC: Display captions from a closed-caption source.
27 AV MODE: Select an audio or video setting.
(When the input source is TV, INPUT 1, 2 or 3:
STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed),
DYNAMIC. When the input source is INPUT 4, 5 or 6:
STANDARD, MOVIE, GAME, PC, USER, DYNAMIC
(Fixed), DYNAMIC)
NOTE
• When using the remote control unit, point it at the TV.
2 – 2
LC-32/37D43U
QUICK REFERENCE
Attaching the stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are 9 screws (all the same size) supplied with the TV.
3
Insert the stand into the openings on the bottom of the TV.
Insert and tighten the 4 screws into the 4 holes on the rear of the TV.
2
Set the post for the stand unit onto the box.
Attach the base to the post.
Insert and tighten the 5 screws into the 5 holes on the bottom of the base.
Hex key
Screw
Soft cushion
Hex key
Screw
NOTE
To detach the stand, perform the steps in reverse order.
2 – 3
LC-32/37D43U
Basic adjustment settings
Menu items for TV/INPUT 1/2/3 Menu items for HDMI/PC-IN
Picture Picture
OPC
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Color Temp.
Black
I/P Setting
Film Mode
3D-Y/C
Monochrome
Range of OPC
OPC
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Color Temp.
Black
I/P Setting
Film Mode
Monochrome
Range of OPC
Audio Audio
Treble
Bass
Balance
Surround
Treble
Bass
Balance
Surround
Power Control Power Control
No Signal Off
No Operation Off
No Signal Off
No Operation Off
Setup Setup
EZ Setup
CH Setup
Antenna Setup-DIGITAL
Input Skip
Input Label
Parental CTRL
Position
Language
Reset
Input Skip
Input Signal
Auto Sync.
Input Label
Fine Sync.
Position
Language
Reset
Option
Option
Audio Only
Digital Noise Reduction
Input Select
Output Select
Color System
Caption Setup
Program Title Display
Favorite CH
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
NOTE
Some menu items may not be displayed depending on the selected input source.
Digital Setup
Audio Setup
2 – 4
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS
LC-32D43U
31 11 /
32
(796)
27 9 /
16
(700.0)
19 45 /
64
(500)
7 7 /
8
(200)
19 45 /
64
(500)
3 9 /
32
(83) 3 53 /
64
(97)
LC-32/37D43U
Unit: inch/(mm)
9 37 /
64
(243)
LC-37D43U
35 61 /
64
(913)
32 25 /
64
(822.6)
21 35 /
64
(547)
7 7 /
8
(200)
21 35 /
64
(547)
4 5 /
8
(117) 3 53 /
64
(97)
3 – 1
11 35 /
64
(293)
LC-32/37D43U
- M E M O -
3 – 2
PartsGuide
LC-32/37D43U
PARTS GUIDE
No.SX6Y9LC37D43U
LCD COLOR TELEVISION
MODELS
LC-32D43U
LC-37D43U
[1] CABINET AND MECHANICAL
PARTS (LC-32D43U)
[2] CABINET AND MECHANICAL
PARTS (LC-37D43U)
[3] SUPPLIED ACCESSORIES
CONTENTS
[4] PACKING PARTS (NOT
REPLACEMENT ITEM)
[5] SERVICE JIGS (USE FOR
SERVICING)
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only.
The contents are subject to change without notice.
LC-32/37D43U
[1] CABINET AND MECHANICAL PARTS (LC-32D43U)
3 3-1
3-2
26
4
47
36
41
36
41
49
36 48
41 47
50-2
41
36
39
14
28
32 50-1
1-3
1-10
1 1-7
1-8
1-12
1-8
1-8
1-1
1-8
1-5
1-11
1-6
1-11
1-7
1-8
1-8
1-8
1-13
1-2
1-9
1-4
21
36
24
25
27
1-6
1-11
29
31
39
14
33
40
2-1
34
34
18
19
23
20
46
34
36
17
46
34
5-1
36
2-4
5-2
35 11
42
2
50
34
36
2-3
2-2
2-5
35
30
7-4
7-2
7-3
36
13
9
7-1
36
36
15
6-1
6
36
37
16
22
6-2
36
8
38
10
5
12
44
40
45
43
45
2
NO.
PARTS CODE
PRICE
RANK
NEW
MARK
PART
DELIVERY
DESCRIPTION
[1] CABINET AND MECHANICAL PARTS (LC-32D43U)
1 CCABAB612WJ03
1-1 Not Available
1-2 Not Available
1-3 Not Available
1-4 Not Available
1-5 HPNLSA100WJSA
1-6 Not Available
1-7 Not Available
1-8 Not Available
1-9 TLABZA635WJZZ
1-10 TLABZB392WJSA
1-11 XJPSN30P08XS0
1-12 HDECSA014WJSA
1-13 Not Available
2 CCABBA950WJ01
2-1 Not Available
2-2 Not Available
2-3 LHLDWA057WJKZ
2-4 PSPAHB078WJZZ
2-5 LHLDWA055WJKZ
3 CCOVAB929WJ01
3-1 Not Available
3-2 Not Available
4 R1LK315T3LF15
5 CSLDMB061WJ01
5-1 Not Available
5-2 LHLDWA102WJKZ
6 CANGKA902WJ01
6-1 Not Available
6-2 Not Available
7 CCHSMA346WJ01
7-1 Not Available
7-2 LHLDWA102WJKZ
7-3 LHLDWA120WJKZ
7-4 Not Available
8 GCOVAA678WJKA
9 GCOVAB931WJKA
10 HINDPB715WJSA
11 HINDPC239WJSA
12 LANGKA913WJM1
13 LANGKA914WJFW
14 LX-HZA003WJFN
15 LX-NZ3047GEZZ
16 NSFTZ0134CEFW
17 PCLICA004WJKZ
18 PRDARA414WJFW
19 PSPAZA635WJKZ
20 PSPAZA917WJKZ
21 PSPAZB030WJKZ
22 QCNCWA496WJZZ
23 QCNW-E249WJPZ
24 QCNW-E257WJQZ
25 QCNW-E258WJQZ
26 QCNW-E266WJQZ
27 QCNW-E278WJQZ
28 QCNW-E703WJPZ
29 QCNW-F250WJQZ
30 QCNW-F300WJQZ
31 QCNW-F316WJQZ
32 RSP-ZA215WJZZ
33 RSP-ZA216WJZZ
34 XBBS740P06000
35 XBBS930P06000
36 XBPS730P06WS0
37 XBPS830P06000
38 XEBS930P08000
39 XEBS930P10000
40 XEBS940P16000
41 XEBSN40P10000
42 Not Available
43 CDAI-A332WJ01
44 Not Available
45 LX-BZA176WJF9
46 LANGTA414WJM1
47 LANGHA052WJFW
48 LANGHA051WJFW
49 LANGKA929WJFW
50 CANGKA930WJ01
50-1 Not Available
50-2 LHLDWA120WJKZ
-
AF
AP
AG
AG
AK
AL
-
AB
N
N
N
N
N
N
N
S
N
S
S
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
X
-
X
-
-
X
X
J
-
J
X
-
X
-
-
X
-
-
-
AL
AL
AG
AY
AY
AA
AA
AA
AB
AK
AH
AH
AG
AF
AH
AX
AA
AA
AA
AB
AB
-
AL
AC
AA
AD
AC
AK
AC
AH
AB
AB
-
AF
AQ
AC
AM
BC
AW
-
AB
AN
-
-
AZ
-
-
AE
AS
AC
AS
-
-
EC
-
AD
AF
AA
AQ
-
BH
-
BT
-
-
-
-
AY
-
-
Front Cabinet Ass'y
Front Cabinet
LED Cover
Front Cover
Badge, SHARP
SP-Net
Spacer, x2
Spacer, x2
Spacer, x7
POP Label
POP Label
Screw (for Front Cover), x3
Shine trim
Spacer
Rear Cabinet Ass'y
Rear Cabinet
Terminal Label
Wire Holder
Spacer, x6
Wire Holder
Top Cover Ass'y
Top Cover
Operation Button
32" WIDE LCD Panel Module Unit
MAIN Shield Ass'y
MAIN Shield
Wire Holder, x3
Jack Angle Ass'y
Jack Angle
Jack Indicator
Tray Chassis Ass'y
Tray Chassis
Wire Holder, x3
Wire Holder
Barrier Sheet
SD Card Cover
Stand Area Cover
Terminal Label
Model Label
Stand Fix Angle
Stand Assist Angle
Screw (for SP-BOX), x4
Nut
Shaft, x2
Rivet, x3
Heat Sink
Cool Sheet
Cool Sheet
Spacer
Connector (F-RCA)
Connecting Cord (ANT IN)
Connecting Cord (PE)
Connecting Cord (PD)
Connecting Cord (KM)
Connecting Cord (SH)
Connecting Cord (LV)
Connecting Cord (RA)
Connecting Cord (LA-LA-LB)
Connecting Cord (SP)
Speaker (L)
Speaker (R)
Screw (for ANG), x6
Screw (for CAB-B), x5
Screw (for PWB,ANG), x41
Screw (for HDMI), x2
Screw (forJack)
Screw (for LED), x2 (for SOUSA), x2
Screw (for CAB-B), x10
Screw (for PANEL), x4
No. Label
Stand Base Ass'y
Stand Support
Screw (forStand), x9
Center Angle, x2
Rug Angle Top, x2
Center Angle Top
Rug Angle Bottom L
Rug Angle Bottom R Ass'y
Rug Angle Bottom R
Wire Holder
X
X
X
X
J
-
X
-
X
X
-
J
J
J
J
J
X
J
J
J
X
X
X
X
J
J
J
X
J
X
J
J
J
X
J
J
X
J
J
J
X
X
X
X
J
J
-
X
-
-
X
-
X
-
J
X
X
-
-
J
3
LC-32/37D43U
LC-32/37D43U
[2] CABINET AND MECHANICAL PARTS (LC-37D43U)
1
3
1-12
1-7
1-3
1-10
1-9
1-8
1-8
1-8
1-1
1-8
1-5
1-11
1-6
1-11
1-7
1-8
1-8
1-8
1-13
1-2
1-4
3-1
3-2
39
32
26
4
14
1-6
1-11
31
14
29
39
33
36
24
2
2-1
34
34
30
21
7
7-2
25
7-1
28
36
7-4
7-2
7-3
36
27
18
23
19
20
46
36
34
49
34
36
17
5-1
2-4
5-2
36
15
6-1
6
6-2
36
8
37
5
16
22
38
10
36
47
36
41
36
40
36
49
35 11
48
41
42
47
50-1
50-2
50
41
2-5
2-3
2-2
41
36
36
12
44
36
13
9
34
40
45
35
43
45
4
NO.
PARTS CODE
PRICE
RANK
NEW
MARK
PART
DELIVERY
DESCRIPTION
[2] CABINET AND MECHANICAL PARTS (LC-37D43U)
1 CCABAB633WJ03
1-1 Not Available
1-2 Not Available
1-3 Not Available
1-4 Not Available
1-5 HPNLSA101WJSA
1-6 PSPAHA416WJZZ
1-7 Not Available
1-8 Not Available
1-9 TLABZA635WJZZ
1-10 TLABZB392WJSA
1-11 XJPSN30P08XS0
1-12 HDECSA015WJSA
1-13 Not Available
2 CCABBA962WJ01
2-1 Not Available
2-2 Not Available
2-3 LHLDWA057WJKZ
2-4 PSPAHB078WJZZ
2-5 LHLDWA055WJKZ
3 CCOVAB929WJ01
3-1 Not Available
3-2 Not Available
4 R1LK370T3LZ5BW
5 CSLDMB061WJ01
5-1 Not Available
5-2 LHLDWA102WJKZ
6 CANGKA902WJ01
6-1 Not Available
6-2 Not Available
7 CCHSMA346WJ01
7-1 Not Available
7-2 LHLDWA102WJKZ
7-3 LHLDWA120WJKZ
7-4 Not Available
8 GCOVAA678WJKA
9 GCOVAB931WJKA
10 HINDPB715WJSA
11 HINDPC240WJSA
12 LANGKA913WJM1
13 LANGKA914WJFW
14 LX-HZA003WJFN
15 LX-NZ3047GEZZ
16 NSFTZ0134CEFW
17 PCLICA004WJKZ
18 PRDARA414WJFW
19 PSPAZA635WJKZ
20 PSPAZA917WJKZ
21 PSPAZB030WJKZ
22 QCNCWA496WJZZ
23 QCNW-E249WJPZ
24 QCNW-E257WJQZ
25 QCNW-E258WJQZ
26 QCNW-E266WJQZ
27 QCNW-E278WJQZ
28 QCNW-E703WJPZ
29 QCNW-F265WJQZ
30 QCNW-F271WJQZ
31 QCNW-F272WJQZ
32 RSP-ZA215WJZZ
33 RSP-ZA216WJZZ
34 XBBS740P06000
35 XBPS930P08JS0
36 XBPS730P06WS0
37 XBPS830P06000
38 XEBS930P08000
39 XEBS930P10000
40 XEBS940P16000
41 XEBSN40P10000
42 Not Available
43 CDAI-A337WJ01
44 Not Available
45 LX-BZA176WJF9
46 LANGTA417WJFW
47 LANGKA932WJFW
48 LANGKA916WJFW
49 LANGKA931WJFW
50 CANGKA931WJ01
50-1 Not Available
50-2 LHLDWA120WJKZ
51 QCNW-F273WJQZ
-
AF
AP
AG
AG
AK
AL
-
AB
AG
N
N
N
N
N
N
N
N
S
S
S
S
N
S
S
N
S
N
N
N
N
N
N
N
N
N
N
N
N
N
S
N
N
N
X
-
X
-
-
X
X
J
-
J
X
-
X
J
-
X
-
-
-
AM
AM
AH
AY
AY
AA
AB
AA
AB
AK
AH
AH
AG
AF
AH
AX
AA
AA
AA
AB
AB
-
AL
AC
AA
AD
AC
AK
AC
AH
AB
AB
-
AF
AQ
AC
AH
BC
AW
-
AB
AN
-
-
AZ
-
-
AE
AS
AC
AS
-
-
EZ
-
AD
AF
AA
AQ
-
BD
-
BW
-
-
-
-
AZ
AC
-
Front Cabinet Ass'y
Front Cabinet
LED Cover
Front Cover
Badge, SHARP
SP-Net
Spacer, x2
Spacer, x2
Spacer, x7
POP Label
POP Label
Screw (for Front Cover), x3
Shine trim
Spacer
Rear Cabinet Ass'y
Rear Cabinet
Terminal Label
Wire Holder
Spacer, x6
Wire Holder
Top Cover Ass'y
Top Cover
Operation Button
37" WIDE LCD Panel Module Unit
MAIN Shield Ass'y
MAIN Shield
Wire Holder, x3
Jack Angle Ass'y
Jack Angle
Jack Indicator
Tray Chassis Ass'y
Tray Chassis
Wire Holder, x3
Wire Holder
Barrier Sheet
SD Card Cover
Stand Area Cover
Terminal Label
Model Label
Stand Fix Angle
Stand Assist Angle
Screw (for SP-BOX), x4
Nut
Shaft, x2
Rivet, x3
Heat Sink
Cool Sheet
Cool Sheet
Spacer
Connector (F-RCA)
Connecting Cord (ANT IN)
Connecting Cord (PE)
Connecting Cord (PD)
Connecting Cord (KM)
Connecting Cord (SH)
Connecting Cord (LV)
Connecting Cord (RA)
Connecting Cord (LA-LA-LB)
Connecting Cord (SP)
Speaker (L)
Speaker (R)
Screw (for ANG), x6
Screw (for CAB-B), x5
Screw (for PWB,ANG), x42
Screw (for HDMI), x2
Screw (for JACK)
Screw (for LED), x2 (for SOUSA), x2
Screw (for CAB-B), x10
Screw (for PANEL), x4
No. Label
Stand Base Ass'y
Stand Support
Screw (for Stand), x9
Center Angle, x2
Rug Angle Top LR, x2
Chassis Fix Angle Top
Rug Angle Bottom LR
Rug Angle Bottom LR Ass'y
Rug Angle Bottom LR
Wire Holder
Connecting Cord (MODEL SETTING)
X
X
X
X
J
-
X
-
X
X
-
J
X
J
J
J
J
X
J
J
J
X
X
X
X
J
J
J
X
J
X
J
J
J
X
J
J
X
J
J
J
X
X
X
X
J
J
-
X
-
-
X
-
X
-
J
X
X
-
-
J
5
LC-32/37D43U
LC-32/37D43U
[3] SUPPLIED ACCESSORIES
X1 X2 X3 X4
X5 X6 X9
!
NO.
PARTS CODE
PRICE
RANK
NEW
MARK
[3] SUPPLIED ACCESSORIES
X1 LHLDWA083WJ00
X2 LHLDWA131WJKZ
X3 QACCDA039WJPZ
X4 RRMCGA535WJSA
X5 TINS-D004WJZZ
X6 Not Available
X7 TCADEA208WJZZ
X8 Not Available
X9 CDAI-A332WJ02
X9 CDAI-A337WJ02
X9-1 UKOGLA001WJZZ
X10 TGAN-A768WJZZ
AD
AE
AQ
AY
AM
-
AD
-
BM
BP
AK
AD
N
N
N
N
N
PART
DELIVERY
X
X
X
-
X
-
X
J
J
J
X
Cable Band
Cable Clamp
AC Cord
Remote Control Unit
Operation Manual
"AAA" Size Battery
Enquete Card
Caution Card
Stand Unit [LC-32D43U]
Stand Unit [LC-37D43U]
Tool for Stand
Extend warranty
DESCRIPTION
X9-1
6
[4] PACKING PARTS (NOT REPLACEMENT ITEM)
S7
S8
S9
S7
S2
S3
S5
S6
S10
S11
S4
LC-32/37D43U
S7
S7
S1
7
S12
LC-32/37D43U
NO.
PARTS CODE
PRICE
RANK
NEW
MARK
PART
DELIVERY
DESCRIPTION
[4] PACKING PARTS (NOT REPLACEMENT ITEM)
S1 SPAKCD351WJZZ
S1 SPAKCD352WJZZ
S2 SPAKFB119WJZZ
S2 SPAKFB132WJZZ
S3 SPAKFB120WJZZ
S3 SPAKFB133WJZZ
S4 SPAKPA794WJZZ
S4 SPAKPA795WJZZ
S5 SPAKPA796WJZZ
S5 SPAKPA797WJZZ
S6 SPAKPA798WJZZ
S7 SPAKXB306WJZZ
S7 SPAKXB320WJZZ
S8 SSAKA0101GJZZ
S9 SSAKAA032WJZZ
S10 SSAKHA020WJZZ
S11 SSAKHA033WJZZ
S12 TLABKA009WJZZ
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
N
N
N
N
N
N
N
N
N
N
N
N
N
N
[5] SERVICE JIGS (USE FOR SERVICING)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Packing Case [LC-32D43U]
Packing Case [LC-37D43U]
Stand Case [LC-32D43U]
Stand Case [LC-37D43U]
Stand Pad [LC-32D43U]
Stand Pad [LC-37D43U]
Wrapping Paper (Monitor) [LC-32D43U]
Wrapping Paper (Monitor) [LC-37D43U]
Mirror Mat Base [LC-32D43U]
Mirror Mat Base [LC-37D43U]
Mirror Mat Sup
Packing Add. [LC-32D43U]
Packing Add. [LC-37D43U]
Polyethylene Bag
Polyethylene Bag
Polyethylene Bag (for Screw)
Polyethylene Bag (for Cloth)
No. Label
N QCNW-D483WJQZ
0
N QCNW-E068WJQZ
0
N QCNW-F304WJQZ
0
0
0
N QCNW-E673WJPZ
0
N QCNW-E674WJQZ
AX
AS
AV
BP
AS
J
J
J
J
J
Connecting Cord (PE (PA) 12pin 100cm)
MAIN to POWER Unit
Connecting Cord (PD (MI) 6pin 100cm)
MAIN to POWER Unit
Connecting Cord (LA/LB 4p-8p 130cm)
MAIN to INVERTER Unit
Connecting Cord (LA 10p-14p 100cm)
POWER to INVERTER Unit
Connecting Cord (LV 30pin 100cm)
MAIN to LCD CONTROL Unit
Connecting Cord (SH 7pin 100cm)
8
- M E M O -
LC-32/37D43U
9
LC-32/37D43U
COPYRIGHT
©
2007 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No Part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any from or by any means, electronic, mechanical, photocopying, recording, orotherwise, without prior written permission of the publisher.
Jan. 2007 Printed in Japan
TQ2092-S SY. KG
SHARP CORPORATION
AV Systems Group
CS PromotionCenter
Yaita,Tochigi 329-2193, Japan
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement