Audiovox PCD-5R User manual

OM8010GR
user manual
TXT8010
TXT8010
TXT8010
manual de usuario
5U000162R0A Rev00
User Guide
TXT8010
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 1
2008.11.3 5:4:38 PM
CHAPTER 2. BASIC OPERATION
BASIC OPERATION ......................................................................... 14
TURNING THE PHONE ON/OFF ..................................................... 14
ACCESSING THE MENU ................................................................ 14
MENU SUMMARY ....................................................................... 15
MAKING A CALL ......................................................................... 17
ANSWERING CALLS .................................................................... 17
MISSED CALL NOTIFICATION........................................................ 17
WAIT/PAUSE FEATURE ................................................................ 18
ANSWERING A CALL ................................................................... 18
2
Table of Contents
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 2-3
MAKING AN INTERNATIONAL CALL .............................................. 18
3-WAY CALLING ......................................................................... 19
CALL WAITING FUNCTION ........................................................... 19
CALLING A NUMBER FROM PHONEBOOK ...................................... 19
ADJUSTING VOLUME................................................................... 20
ADJUSTING THE CALL VOLUME .................................................... 20
CALLER ID FUNCTION ................................................................. 20
VIBRATE ON/OFF MODE ............................................................. 20
SPEAKERPHONE MODE.............................................................. 20
USING AUTO KEYPAD LOCK FUNCTION.......................................... 21
AVAILABLE OPTIONS DURING A CALL ........................................... 21
MAKING AN EMERGENCY CALL .................................................... 22
USING THE microSD CARD........................................................... 22
CHAPTER 3. MEMORY FUNCTION
MEMORY FUNCTION ...................................................................... 26
STORING A PHONE NUMBER ....................................................... 26
ENTERING LETTERS, NUMBERS & SYMBOLS ................................. 30
ONE, TWO-TOUCH DIALING ......................................................... 32
CHAPTER 4. MENU FUNCTION
RECENT CALLS............................................................................... 34
RECENT CALLS............................................................................ 34
ALL CALLS................................................................................. 34
MISSED CALLS ........................................................................... 35
RECEIVED CALLS ........................................................................ 35
DIALED CALLS ........................................................................... 36
CALL TIMERS ............................................................................. 36
PHONE BOOK ................................................................................ 37
NEW ENTRY ............................................................................... 37
LIST ENTRIES ............................................................................. 37
MESSAGE GROUPS...................................................................... 38
GROUPS .................................................................................... 40
SPEED DIALS .............................................................................. 41
MEDIA GALLERY ............................................................................ 43
SOUND BOX ............................................................................... 43
PICTURE BOX ............................................................................. 43
MP3 BOX ................................................................................... 44
NEO APPLICATIONS ....................................................................... 45
STARTING NEO APPLICATIONS ..................................................... 45
DOWNLOADING APPLICATIONS ................................................... 45
DOWNLOADING MELODIES/WALLPAPERS ..................................... 45
APPLYING MELODIES/WALLPAPERS ............................................. 46
CHECKING DATA FOLDER MEMORY............................................... 46
DELETE APPLICATION ................................................................. 46
NEO NAVIGATION .......................................................................... 47
STARTING NEO NAVIGATION ........................................................ 47
MOBILE WEB MENU.................................................................... 47
SETTINGS...................................................................................... 49
SOUND SETTINGS ....................................................................... 49
DISPLAY SETTINGS ..................................................................... 52
PHONE SETTINGS ....................................................................... 53
CALL SETTINGS .......................................................................... 56
MEMORY ................................................................................... 58
BLUETOOTH ............................................................................... 59
PHONE INFO .............................................................................. 62
CAMERA ....................................................................................... 63
CAMERA .................................................................................... 63
VOICE TOOLS ................................................................................. 65
VOICE COMMANDS ..................................................................... 65
VOICE COMMANDS SETTINGS ...................................................... 67
VOICE COMMANDS INFO ............................................................. 69
Table of Contents
Contents
Contents
CHAPTER 1. BEFORE USING TXT8010
BEFORE USING ................................................................................ 6
INSIDE THE PACKAGE .................................................................... 6
HANDSET DESCRIPTIONS .............................................................. 7
KEYS DESCRIPTIONS ..................................................................... 8
DISPLAY INDICATORS.................................................................... 9
INSTALL BATTERY ....................................................................... 11
REMOVE BATTERY ...................................................................... 11
CHARGING YOUR BATTERY .......................................................... 12
BATTERY HANDLING INFORMATION ............................................. 12
3
2008.11.3 5:4:40 PM
Contents
CHAPTER 5. MESSAGING MENU
MESSAGING .................................................................................. 80
WHEN A NEW MESSAGE ARRIVES ................................................ 80
NEW MESSAGE ........................................................................... 80
VOICEMAIL ................................................................................ 81
INBOX ....................................................................................... 82
SENT ......................................................................................... 83
DRAFTS ..................................................................................... 83
SETTINGS .................................................................................. 84
ERASE ....................................................................................... 85
4
CHAPTER 6. SAFETY AND WARRANTY
SAFETY ......................................................................................... 88
SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES ........... 88
SAFETY INFORMATION FOR FCC RF EXPOSURE .............................. 91
SAR INFORMATION ..................................................................... 91
FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS FOR
WIRELESS DEVICES..................................................................... 92
FDA CONSUMER UPDATE ............................................................. 94
AVOID POTENTIAL HEARING LOSS. ............................................... 98
FCC COMPLIANCE INFORMATION ................................................100
WARRANTY..................................................................................101
12 MONTH LIMITED WARRANTY .................................................101
CHAPTER 1
BEFORE USING TXT8010
This chapter provides important information about using the
TXT8010 including:
Inside the package
Handset descriptions
Keys descriptions
Display indicators
Install battery
Remove battery
Charging your battery
Battery handling information
BEFORE USING TXT8010
TOOLS ........................................................................................... 70
ALARM CLOCK ............................................................................ 70
CALENDAR ................................................................................. 71
WORLD CLOCK ........................................................................... 74
NOTEPAD ................................................................................... 75
CALCULATOR .............................................................................. 76
STOP WATCH .............................................................................. 76
MASS STORAGE .......................................................................... 77
Table of Contents
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 4-5
2008.11.3 5:4:41 PM
HANDSET DESCRIPTIONS
20 21 22
17
23
1
Standard Battery
User Guide
USB Cable
2
16
15
3
14
4
5
6
7
13
Handset
Battery Cover
6
Chapter 1 − Before Using TXT8010
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 6-7
Wall Charger
24
18
25
19
26
27
12
8
Before Using
Before Using
INSIDE THE PACKAGE
This package should include all items pictured below. If any are missing or different, immediately contact
the retailer where you purchased the phone.
9 10 11
1. Display Screen
2. Menu/Left Soft Key
3. SEND Key
4. Speakerphone Key
5. Voicemail Key
6. Dialing Keypad
7. Microphone
8. International Dial Key
9. Vibrate Mode Key
10. OK Key
11. My Messaging Key
12. QWERTY Keyboard
13. CLR Key
14. END Key
15. Phonebook/Right Soft Key
16. Directional Key
17. Earpiece
18. Headset Jack
19. Volume Keys
20. External Speaker
21. Self-Portrait Mirror
22. Camera Lens
23. Wrist Strap Eyelet
24. Charging / Data Jack
25. AVR Key
26. Camera Key
27. microSD Card Slot
Before Using TXT8010 − Chapter 1
7
2008.11.3 5:4:42 PM
KEYS DESCRIPTIONS
1. Display Screen: This screen displays all the information needed
to operate your phone.
2. [ ] Menu/Left Soft Key: Press to display the Main menu or
access the function listed above the key.
3. [ ] SEND Key: Press to make or receive a call. In standby mode,
press to access your All Calls list.
4. [ ] Speakerphone Key: Press to turn Speakerphone On
or Off.
5. [ ] Voicemail Key: Press and hold to automatically dial your
voicemail system.
6. Dialing Keypad: In idle mode, press to enter phone numbers.
7. Microphone: Allows the other caller to hear you clearly when
you are speaking to them.
8. [ ] International Dial Key: Press and hold to enter a plus “+”.
A “+” is reserved for international dialing code.
9. [ ] Vibrate Mode Key: Press and hold to place your device in
Vibrate mode.
8
Chapter 1 − Before Using TXT8010
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 8-9
10. [ ] OK Key: Allows you to accept choices when navigating
through a menu.
11. [ ] My Messaging Key: Press to access the My Messaging
menu.
12. QWERTY Keyboard: Press to enter numbers, letters, and
characters using a full QWERTY keypad interface.
13. [ ] CLR Key: When entering a phone number or text, press
to delete a single space or character. Press and hold to delete
entire words. Press this key once in a menu to go back one level.
In WAP applications mode, press to retrieve the last URL, or
press and hold to retrieve the home page URL. During download
mode, press to cancel the download.
14. [ ] END Key: Press to turn the phone on/off, end a call or
browser session, and/or return to idle mode.
15. [ ] Phonebook/Right Soft Key: Press to display
Phonebook or to access the function listed above the key.
16. [ ] Directional Key: The Directional Key allows you to scroll
through phone menu options.
17. Earpiece: The earpiece allows you to hear the other caller.
18. Headset Jack: Plug in the Headset Connector here to use a
headset.
19. [ ] Volume Keys: Allows you to adjust the master volume in
standby mode or adjust the voice volume during a call.
20. External Speaker: Music, Ringtones, and Sounds are played
through the speaker.
21. Self-Portrait Mirror: Displays your reflection when taking
pictures.
22. Camera Lens: The lens of your built-in camera.
23. Wrist Strap Eyelet: Accessory eyelet (optional straps and
lanyards - purchased separately).
24. Charging/Data Jack: Plug in the Wall Charger or USB Cable
here.
25. [ ] AVR Key: In idle mode, press and hold to activate ”Nuance
VSuite 3.2“.
26. [ ] Camera Key: Press to access Camera Viewfinder mode.
27. microSD Card Slot: You can insert a microSDTM memory card
here to increase memory capacity.
DISPLAY INDICATORS
Icon
Icon Discriptions
Before Using
Before Using
The following list correlates to the previous page’s phone illustration.
D Signal Strength: CDMA IS 95 service available.
1X Signal Strength: 1X service is available.
Airplane Mode: Transmitting and receiving information is restricted.
Roaming: The phone is outside of the home service area.
Voice Privacy: Indicates Voice Privacy mode is active.
Data Call: Data Session in progress.
Dormant: Phone is in a dormant state during a data call. Phone
reverts to Dormant mode when there hasn’t been activity on a page
for some time — the connection is still active and you can make and
receive calls.
No Service: Phone cannot receive a signal from the system.
TTY: TTY mode is active.
Voice Call: A call is in progress.
* No icon indicates the phone is in standby mode.
Before Using TXT8010 − Chapter 1
9
2008.11.3 5:4:43 PM
Icon Discriptions
Icon
Icon Discriptions
GPS Icon: Location Service of your phone is E911/Location On.
Message: Indicates you have new message(s).
Bluetooth: Indicates Bluetooth mode.
Voicemail: Indicates you have voicemail message(s).
Bluetooth Active: Indicates Bluetooth Active mode.
Alarm On: Appears when an alarm is set.
INSTALL BATTERY
REMOVE BATTERY
1. Remove the battery cover from the unit.
1. To remove the battery, push down on the top
of the battery while inserting your finger into
the slot and pulling up from the back of the
battery and slide it out.
Bluetooth Conncted: Indicates Bluetooth Device is connected.
Battery Level: Battery charging level — the more blocks, the
stronger the charge.
AVR Active: AVR mode is active.
2. Slide the battery into the slot located at the
bottom of the unit and press until you hear
the “click”.
2. Align the cover tabs with the slots at the top
of the device and slide the battery cover back
onto the unit.
AVR Listening: Indicates AVR listening.
All Sounds Off: Ringer volume is set to off.
Vibrate Only: Phone will vibrate when call is received.
If the battery is not correctly placed in the compartment, the handset will not turn on
and/or the battery may detach during use.
Speakerphone: Speakerphone mode is active.
10
Chapter 1 − Before Using TXT8010
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 10-11
Before Using TXT8010 − Chapter 1
Before Using
Before Using
Icon
11
2008.11.3 5:4:45 PM
Before Using
BATTERY HANDLING INFORMATION
• Only use the battery and charger approved for use with the TXT8010.
• Only use the battery for its original purpose.
• Try to keep batteries in a temperature between 41 °F (5 °C) and 95 °F (35 °C). If
2. To remove the adapter connection,
squeeze the adapter’s side buttons
(1) and pull.
•
•
•
•
• When you charge the battery with the phone power off, you will see a charging status
screen. You cannot operate the phone until it is powered on.
• The battery is not fully charged at the time of purchase. Fully charge the battery
before use.
• It is more efficient to charge the battery with the handset powered off.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the battery.
12
CHAPTER 2
DO’S
the battery is stored in temperatures above or below the recommended range,
give it time to warm up or cool down before using.
Completely drain the battery before recharging.
Store the discharged battery in a cool, dark, and dry place.
Purchase a new battery when its operating time gradually decreases after fully
charging.
Properly dispose of the battery according to local laws.
DON’TS
• Don’t attempt to disassemble the battery – it is a sealed unit with no service-
able parts.
• Don’t accidentally short circuit the battery by carrying it in your pocket or purse
with other metallic objects such as coins, clips and pens. This may critically
damage the battery.
• Don’t leave the battery in extremely hot or cold temperatures. Otherwise, it could
significantly reduce the capacity and lifetime of the battery.
• Don’t dispose of the battery by placing into a fire.
BASIC OPERATION
This chapter addresses and explains the basic features of your
phone including:
Turning the phone on/off
Accessing the menu
Menu summary
Making a call
Answering calls
Missed call notification
Wait/Pause feature
Answering a call
Making an international call
3-way calling
Call waiting function
Calling a number from phonebook
Adjusting volume
Adjusting the call volume
Caller ID function
Vibrate on/off mode
Speakerphone mode
Using auto keypad lock function
Available options during a call
Making an emergency call
Using the microSD card
BASIC OPERATION
CHARGING YOUR BATTERY
1. To charge the phone, open the
Charging/Data Jack cover on the
right side of the phone, and
connect the charger adapter.
Plug the other end into a standard
outlet.
Chapter 1 − Before Using TXT8010
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 12-13
2008.11.3 5:4:46 PM
Basic Operation
ACCESSING THE MENU
TURNING THE PHONE ON
Your phone can be customized via the menu. Each function can be accessed
by scrolling with the Directional Key or by pressing the number that
corresponds with the menu item.
1. Press and hold the END Key until your display turns on and the
tone sounds.
• If “Enter Lock Code” appears on the display, enter your 4-digit lock code to unlock
your phone.
• The default lock code is “1234”.
TURNING THE PHONE OFF
1. Press the OK Key [OK] to unlock the keypad, then press and hold
the END Key until your display turns off.
• Immediately change or recharge the battery when “BATTERY LOW” appears on the
display. Memory may possibly be damaged if the phone turns off due to the battery
completely draining.
• Turn the phone off before removing or replacing the battery. If the phone is on,
unsaved data may be lost.
Main Menu
Recent Calls
1. All Calls
2. Missed Calls
3. Received Calls
4. Dialed Calls
5. Call Timers
Phone Book
1. New Entry
2. List Entries
3. Message Groups
4. Groups
5. Speed Dials
1. To access the menu in idle mode, press the OK Key [OK] to unlock
the keypad, then press the Left Soft Key
[Menu].
2. To scroll through the menu, press the Directional Key
left or right.
2ND DEPTH
up, down,
. To exit the
3. To return to the previous page, press the CLR Key
current menu and return to the idle mode, press the END Key .
Media Gallery
1. Sound Box
2. Picture Box
3. MP3 Box
Messaging
1. New Message
2. Voicemail
3. Inbox
4. Sent
5. Drafts
14
Chapter 2 − Basic Operation
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 14-15
3RD DEPTH
Main Menu
Messaging
2ND DEPTH
6. Settings
7. Erase
Neo Applications
1. Text Message
2. Picture Message
Basic Operation
MENU SUMMARY
TURNING THE PHONE ON/OFF
3RD DEPTH
1. Entry Mode
2. Auto Save
3. Auto Erase
4. Auto Receive
5. Quick Text
6. Callback #
7. Signature
1. Erase Inbox
2. Erase Drafts
3. Erase Sent
4. Erase All
1. Neo Applications
Neo Navigation
1. Connect WAP
Settings
1. Sound Settings
1. Ringer Volume
2. Dial Sounds
3. Call Sounds
4. Msg Sounds
5. Service Alerts
Basic Operation − Chapter 2
15
2008.11.3 5:4:47 PM
Basic Operation
2ND DEPTH
Settings
2. Display Settings
3. Phone Settings
4. Call Settings
3RD DEPTH
6. Power On/Off
7. Key Tone
1. My Banner
2. Backlight Duration
3. Contrast
4. Wallpaper
5. Clock Format
6. Menu Type
1. Airplane Mode
2. Language
3. Menu Readout
4. Message Readout
5. Location
6. Security
7. NAM Selection
1. Answer Options
2. Auto Retry
3. TTY Mode
4. One Touch Dial
5. Voice Privacy
Main Menu
Settings
2ND DEPTH
5. Memory
6. Bluetooth
7. Phone Info
Camera
1. Take a Picture
2. Picture Gallery
Utilities
1. Voice Commands
2. Alarm Clock
3. Calendar
4. World Clock
5. Notepad
6. Calculator
7. Stop Watch
8. Mass Storage
3RD DEPTH
1. Save Options
2. Internal Memory
3. External Memory
1. New Device
1. My Number
2. SW Version
MAKING A CALL
1. Slide out the QWERTY keyboard and from standby mode enter the
phone number (include the area code if needed). Press the SEND
Key .
• To erase one digit at a time press the CLR Key
.
• To erase the entire number, press and hold the CLR Key
.
• When you place or receive a call from phone numbers stored in your Phonebook list
with a entry name, the name will be displayed.
2. To end a call, press the END Key .
• If you activate the “Auto Retry” function, the phone will automatically re-dial the
number (Refer to page 57).
• You can also place calls using Voice-Activated Dialing. Please refer to page 65 for
more details.
ANSWERING CALLS
1. When your phone rings or vibrates, press the SEND Key to answer
the incoming call. (Depending on your phone’s settings, you may also
answer incoming calls by opening the phone or by pressing any key.)
2. To ignore incoming calls, press the Right Soft Key
3. To end a call, press the END Key .
16
Chapter 2 − Basic Operation
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 16-17
[Ignore].
In “Auto Answer” a call is automatically answered after a preset number of ring tones
(Refer to page 56).
MISSED CALL NOTIFICATION
When an incoming call is not answered, the Missed Call logo appears on the
display.
TO DISPLAY THE MISSED CALL ENTRY FROM THE
NOTIFICATION SCREEN:
1. Highlight the entry “View Now” and press the OK Key
.
2. To dial the phone number, press the SEND Key .
TO DISPLAY A MISSED CALL ENTRY FROM STANDBY MODE:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the Left Soft Key
[Menu], then select “Recent Calls”
menu.
2. Slide out the QWERTY keyboard, and then select “Missed Calls”.
3. Highlight the entry you wish to view, then press the OK Key
[OK].
4. To dial the phone number, press the SEND Key .
Basic Operation − Chapter 2
Basic Operation
Main Menu
17
2008.11.3 5:4:48 PM
Basic Operation
ANSWERING A CALL
3WAY CALLING
1. If your phone is set to “Slide Open” for “Answer Options,” simply
open the phone to answer a call. If your phone is set to “Any Key” for
“Answer Options,” press any key to answer a call.
If your phone is set to “Auto Answer” for “Answer Options,” calls are
answered automatically with a 5 second delay. If your phone is set
to “Send Key” for “Answer Options,” only press the SEND Key to
answer a call. For information on how to set your Answer Options,
see page 56.
With 3-Way Calling, you can talk to two people at the same time. When using
this feature, the normal airtime rates will be applied for each of the two calls.
Hard Pause (P)
The phone stops dialing until you press the OK Key
the next number.
[SEND] to advance to
2 Sec Pause (T)
The phone waits 2 seconds before sending the next string of digits
automatically.
1. Slide out the QWERTY keyboard, and from standby mode enter the
phone number.
2. Press the Right Soft Key
[Options].
2. To end the call, press the END Key .
MAKING AN INTERNATIONAL CALL
1. Slide out the QWERTY keyboard, and then press and hold the * Key
. The + required for international calls will be displayed.
up or down to select pause type, then
3. Press the Directional Key
the OK Key [OK]. “2 Sec Pause/Hard Pause”.
2. Enter the country code, area code, and phone number, then press
the SEND Key .
4. Enter additional number(s) (pin number or credit card number).
3. To end the call, press the END Key .
5. Press the SEND Key to dial or the Left Soft Key
18
Chapter 2 − Basic Operation
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 18-19
1. Slide out the QWERTY keyboard, enter the phone number you wish to
call, then press the SEND Key .
2. Once you have established the connection, enter the second phone
number you wish to call and then press the SEND Key again.
3. When you’re connected to the second party, press the SEND Key
again to begin your 3-Way call.
If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all three calls are
disconnected.
CALL WAITING FUNCTION
If you are on a call and you receive another incoming call, you will hear two
beeps and the caller’s phone number will appear on the display. With Call
Waiting, you may put the active call on hold while you answer the other
incoming call. To use Call Waiting:
1. To answer another call while on the phone, press the SEND Key .
This places the first call on hold. To switch back to the first caller,
press the SEND Key again.
CALLING A NUMBER FROM PHONEBOOK
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the Right Soft Key
[Phonebook].
up or down to select the Phonebook
2. Press the Directional Key
entry then press the OK Key [VIEW].
3. Press the Directional Key
number.
up or down to select the phone
4. Press the SEND Key to place the call.
Pressing the Directional Key up or down to select the “LIST ENTRIES” and then
pressing the SEND Key will automatically dial the Default Number of the Phonebook
entry. If multiple numbers are saved in the “LIST ENTRIES”, press the Directional Key
up or down to select the “LIST ENTRIES” and then press the Directional Key left
or right to select the number you want to dial. Then press the SEND Key .
[Save].
Basic Operation − Chapter 2
Basic Operation
WAIT/PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail or calling cards).
Insert a pause after a phone number and then enter another group of
numbers. The second set of numbers is dialed automatically after the pause.
This feature is useful for dialing into systems that require a code.
19
2008.11.3 5:4:49 PM
Basic Operation
CALLER ID FUNCTION
USING AUTO KEYPAD LOCK FUNCTION
PHONE BOOK
Caller ID displays the number of the person calling when your phone
rings. If the caller’s identity is stored in Phonebook, the name appears on
the screen. The caller ID is stored in the Recent Calls Menu.
When the Slide is closed, the Side Keys and the Directional Key
are locked. To unlock them, press any key, “Press ok to unlock keypad”
displays, then press the OK Key [OK].
To view your Phone Book list during a call:
1. In idle mode, press the OK Key [OK] to unlock the keypad, then
press the Volume Keys up or down.
2. Select one of the following options and press the OK Key
to save it.
[SET]
• Silent
• Vibrate On
• Level 1 ~ Level 5
Press the Volume Keys up or down to adjust Earpiece volume during a call.
ADJUSTING THE CALL VOLUME
To adjust the earpiece volume during a call, press the Volume Keys up
or down. Press the Volume Keys up to increase the volume level and
the Volume Keys down to decrease the level. In Idle mode, you can also
adjust the ringer volume by following the same steps.
20
Chapter 2 − Basic Operation
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 20-21
VIBRATE ON/OFF MODE
Vibrate Mode mutes key tones and activates an alert for an incoming call or
message. To activate Vibrate Mode:
1. From the idle screen, slide out the QWERTY keyboard, and then press
and hold the # Key .
2. To disable Vibrate Mode, from the idle screen press and hold the #
Key again.
SPEAKERPHONE MODE
The Speakerphone feature lets you hear audio through the speaker and talk
without holding the phone.
To activate the Speakerphone in idle mode or while on a call, press the
Speakerphone Key
. If you press the Speakerphone Key
when
you are not on a call, Speakerphone mode will be active for one minute,
then turn itself off automatically.
You can also open the slide to unlock the keypad.
1. Press the Right Soft Key
[Options], slide out the QWERTY
keyboard, and press “2. Phone Book”.
RECENT CALLS
AVAILABLE OPTIONS DURING A CALL
To view your Recent Calls list during a call:
During a phone call, you can access the following features by pressing the
Right Soft Key [Options]:
1. Press the Right Soft Key
[Options], slide out the QWERTY
keyboard, and press “3. Recent Calls”.
MUTE/UNMUTE
CONNECT BLUETOOTH
If you press Mute during a call, the person you are speaking with cannot hear you or
any sounds from your side of the conversation. However, you can still hear them.
To access the Bluetooth menu during a call:
1. Press the Left Soft Key
[Mute/Unmute].
TEXT MESSAGE
1. Press the Right Soft Key
[Options], slide out the QWERTY
keyboard, and press “4. Connect Bluetooth”.
If an Audio device is connected, “Audio To Phone/Audio To Device” is displayed in the
options menu instead of “Bluetooth”.
To send a Text Message (SMS) during a call:
1. Press the Right Soft Key
[Options], slide out the QWERTY
keyboard, and press “1. Text Message”.
Basic Operation − Chapter 2
Basic Operation
ADJUSTING VOLUME
To adjust the master volume:
21
2008.11.3 5:4:50 PM
Basic Operation
911 USING ANY AVAILABLE SYSTEM
INSTALLING THE microSD CARD
To make an Emergency Call using any available system:
To install a microSD card:
1. Press the Right Soft Key
[Options], slide out the QWERTY
keyboard, and press “5. Speaker Phone On/Off”.
1. Slide out the QWERTY keyboard, enter “911”, then press the SEND
Key .
1. With the microSD card slot opened and the
gold contacts facing down, insert the microSD
card into the slot.
MAKING AN EMERGENCY CALL
The 911 feature automatically places the phone in the Emergency Call Mode
when you dial the preprogrammed emergency number, 911. It also operates
in Lock Mode and out of the service area.
911 IN LOCK MODE
To make an emergency call in Lock Mode:
2. The call connects.
3. The phone will stay in Emergency Mode for 5 minutes. While the
phone is in Emergency Mode, the phone can receive an incoming call
from any available system or you can make outgoing calls even in
Emergency Callback Mode. In this case, making a call can automatically end the Emergency Callback Mode.
The 911 call does not appear in the recent call list.
1. Slide out the QWERTY keyboard, enter “911”, then press the SEND
Key .
USING THE microSD CARD
2. The call connects.
The microSD card stores sounds, images, photos, music, and other files.
3. The phone maintains Emergency Mode for 5 minutes. When the call
ends, the phone returns to Lock Mode.
• When you insert the microSD card, make sure contact terminals are facing down.
• Do not remove the microSD card while reading or writing files. Otherwise it could be
damaged.
To ensure the proper function of removable memory, please use a microSD card.
HOW IS MUSIC TRANSFERRED?
2. Push the card in until it clicks into place.
“Memory card detected” will appear on the
display. Close the microSD card slot.
To prevent possible damages, please keep microSD card slot closed at all times
regardless of whether the microSD card is inserted or not.
MP3 Songs
Transfer from PC
to Handset via USB
Cable
Transfer from
PC to Handset
via Memory card
Yes
Yes
REMOVING THE microSD CARD
To remove the microSD card:
The microSD card is sold separately and is not included in with your phone.
1. Open the microSD card slot. Use your thumb
to press and release the microSD card.
It will pop-out to allow you to remove the
card.
2. Remove the card and close the microSD card
slot.
22
Chapter 2 − Basic Operation
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 22-23
Basic Operation − Chapter 2
Basic Operation
SPEAKER PHONE ON/OFF
To activate the speakerphone during a call:
23
2008.11.3 5:4:51 PM
MEMORY FUNCTION
Note
This chapter addresses memory functions including:
Storing a phone number
Entering letters, numbers & symbols
One, Two-touch dialing
24
MEMORY FUNCTION
CHAPTER 3
Chapter 2 − Basic Operation
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 24-25
2008.11.3 5:4:52 PM
Memory Function
ADDING A NEW ENTRY
1. From standby mode slide out the QWERTY keyboard, then enter the
phone number you want to save.
2. Press the Left Soft Key
3. Press the Directional Key
press the OK Key [OK].
[Save].
up or down to select “New Entry”, then
up or down to select the type of phone
4. Press the Directional Key
number you want to save, then press the OK Key [OK].
Mobile/Home/Work/Pager/Fax
Use Existing Entry to add another phone number to a contact already stored in memory.
5. Enter a name for the phone number (up to 32 characters), then press
the OK Key [SAVE].
6. “Entry saved” appears, then the phone number reappears on the
screen. Press the END Key to exit, or press the SEND Key to call
the number.
26
Chapter 3 − Memory Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 26-27
Press the Right Soft Key
options:
•
•
•
•
[Options] to access the following
2 Sec Pause: Insert a 2-sec Pause in the number.
Hard Pause: Insert a Wait pause in the number.
Text Message: Send a Text message to the contact.
Picture Message: Send a Picture message to the contact.
OPTIONS TO CUSTOMIZE YOUR CONTACTS
Once the basic phone number and name information is stored in your Phonebook,
you can edit and/or customize the entries.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook], then press the
Directional Key
up or down to highlight the Phonebook entry
you want to edit.
2. Press the Left Soft Key
CHANGING GROUPS
then press the Right Soft Key
To organize your contacts into groups:
[Edit] to access the Edit Entry screen.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook], then press the
Directional Key
up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight ”Group”.
left or right to select the group.
4. Press the Directional Key
No Group/Family/Friends/Colleagues/Business
5. Press the OK Key
[SAVE] to save.
CHANGING THE CALL RINGTONE
To identify who is calling by setting different ringtones for different contacts in your
Phonebook:
[Add].
4. Press the Directional Key
up or down to select the new
ringtone, then press the OK Key [OK].
Press the Left Soft Key
[Play] to listen to a highlighted ringtone before you
press the OK Key [OK].
5. Press the OK Key
[SAVE] to save.
ADDING OR CHANGING THE PICTURE ID
To select a picture or graphic to assign to a Caller ID:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook], then press the
Directional Key
up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight ”Picture”,
then press the Right Soft Key
[Add].
up or down to highlight the
3. Press the Directional Key
information field you want to customize. Additional fields include:
Name/Mobile/Home/Work/E-mail 1/Group/Picture/Ringtone/
Pager/Fax/E-mail 2
1. From standby mode, press the OK Key [OK] to unlock the
[Phonebook], then press the
keypad, press the Right Soft Key
Directional Key
up or down to highlight an entry.
up, down, left or right to select a
4. Press the Directional Key
picture, then press the OK Key [OK].
4. Slide out the QWERTY keyboard, change the data as necessary, then
press the OK Key [SAVE] to save.
2. Press the Left Soft Key
5. When completed, press the OK Key
3. Press the Directional Key
[Edit].
[SAVE].
up or down to highlight ”Ringtone”,
Memory Function − Chapter 3
27
Memory Function
STORING A PHONE NUMBER
The Phonebook List stores up to 500 entries.
2008.11.3 5:4:53 PM
Memory Function
up or down to highlight the existing
4. Press the Directional Key
Phone Book entry, then press the OK Key [OK].
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook], then press the
Directional Key
up or down to highlight an entry.
5. Press the Directional Key
up or down to highlight the phone
number type, then press the OK Key [OK].
Mobile/Home/Work/Pager/Fax
2. Press the Left Soft Key
6. If a phone number is already assigned to the item you selected,
press the Left Soft Key
[No] or Right Soft Key
[Yes]. If
nothing is currently assigned to the phone number item, press the
OK Key [OK].
ADDING OR CHANGING AN EMAIL ADDRESS
3. Press the Directional Key
or ”E-mail 2”.
[Edit].
up or down to highlight ”E-mail 1”
4. Slide out the QWERTY keyboard, enter an Email address, then press
the OK Key [SAVE] to save.
EDITING PHONE BOOK ENTRIES
7. “Entry updated” appears, then the phone number reappears on
the screen. Press the END Key to exit, or press the SEND Key
to call the number.
ADDING A PHONE NUMBER FROM THE STANDBY MODE
ADDING A PHONE NUMBER FROM THE PHONE BOOK LIST SCREEN
1. From standby mode slide out the QWERTY keyboard, and then
enter the phone number you want to save (up to 32 digits).
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook]. Your entries
display alphabetically.
2. Press the Left Soft Key
[Save].
up or down to highlight
3. Press the Directional Key
”Existing Entry”, then press the OK Key [OK].
28
Chapter 3 − Memory Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 28-29
up or down to highlight the
2. Press the Directional Key
Phonebook entry you want to edit, then press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight the phone
number field you want to add, slide out the QWERTY keyboard,
enter the number, then press the OK Key [SAVE] to save. A
confirmation message appears.
EDITING STORED PHONE NUMBERS
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook]. Your Phone
Book entries display alphabetically.
up or down to highlight the Phone
2. Press the Directional Key
Book entry you want to edit, then press the Left Soft Key
[Edit].
3. Press the Directional Key
number.
up or down to highlight the phone
4. Slide out the QWERTY keyboard, and then edit the phone number
as necessary, then press the OK Key [SAVE].
EDITING STORED NAMES
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook].
Your Phone Book entries display alphabetically.
2. Press the Directional Key
up or down to highlight the Phone
Book entry you want to edit, then press the Left Soft Key
[Edit].
3. Slide out the QWERTY keyboard, and then edit the name as
necessary, then press the OK Key [SAVE].
DELETING
DELETING A PHONE NUMBER FROM A CONTACT ENTRY
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook]. Your Phone
Book entries display alphabetically.
up or down to highlight the Phone
2. Press the Directional Key
Book entry, then press the Left Soft Key
[Edit].
3. Press the Directional Key
number to be deleted.
4. Press and hold the Clear Key
5. Press the OK Key
up or down to highlight the phone
to delete the number.
[SAVE]. A confirmation message appears.
Memory Function − Chapter 3
29
Memory Function
To enter or add an Email address to a Phonebook entry:
2008.11.3 5:4:55 PM
Memory Function
ENTERING LETTERS, NUMBERS & SYMBOLS
Your device has a QWERTY keyboard that provides a superior typing
experience on a small handheld device for easy and comfortable input.
You can use all of the handset functions with the keyboard either closed
or open. When you slide open the keyboard you have the extra benefit of
a full messaging keyboard.
2. Press the Directional Key
up or down to highlight the
Phonebook entry to be deleted.
3. Press the Right Soft Key
[Options].
4. Slide out the QWERTY keyboard, and then press ”3. Erase”.
5. Press the Right Soft Key
appears.
[Yes]. A confirmation message
Your device has dictionaries for English. The appropriate dictionary is
activated automatically when you select a language on your device.
8
7
1
6
2
30
Chapter 3 − Memory Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 30-31
3
4 5
Your device uses the active dictionary to suggest corrections or complete
the word you’re typing.
1. [ ] Mode Change Key:
• When in idle mode :
- Slide out the QWERTY keyboard, and then press to change
between entering numbers and letters that appear on the
same key.
- Press and hold Mode Change Key to lock in numeric mode or
text entry mode.
• When in Text entry mode :
- Press to change between entering upper and lower case letters.
- Press and hold to lock in numeric or text entry mode.
2. [ ] Word Change Key: When in text entry mode, press to select
the next matching word.
] Space Key: Press to accept a word and add a space.
3. [
4. [ ] Symbols Key: Press to open symbols list.
5. [ ] Caps Key: Press to select a letter case for the standard text
[Abc] input mode. [Abc], [ABC] and [abc] indicate the standard text
input.
6. [ ] Enter Key: Press to insert a carriage return.
7. [ ] Del Key: When in a Text entry field and in entry mode, press to
delete the character to the left of the cursor. Press and hold to delete
the entire word or character string that was just entered.
] CLR Key: When in a Text entry field and in entry mode, press
8. [
to delete the character to the left of the cursor. Press and hold to
delete the entire word or character string that was just entered.
For best performance in low-light environments, your handset includes a backlight
feature that can illuminate both the display and the keyboard so you can keep reading
and typing. (Please refer to page 52 for more details on “Backlight Duration”.)
Memory Function − Chapter 3
31
Memory Function
DELETING A PHONEBOOK ENTRY
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Right Soft Key
[Phonebook].
2008.11.3 5:4:56 PM
Memory Function
CHAPTER 4
MENU FUNCTION
ONETOUCH DIALING:
1-9 : Slide out the QWERTY keyboard, and then press and hold the
number you wish to connect to for more than 1 second.
TWOTOUCH DIALING:
10-20 : Slide out the QWERTY keyboard, and then press the first digit and
press and hold the second digit of the number to dial.
32
Chapter 3 − Memory Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 32-33
This chapter addresses accessing the menu and using its functions
and features to customize your phone.
Recent calls
All calls
Missed calls
Received calls
Dialed calls
Call timers
New entry
List entries
Message groups
Groups
Speed dials
Sound box
Picture box
MP3 box
Starting Neo Applications
Downloading Applications
Downloading melodies/wallpapers
Applying melodies/wallpapers
Checking data folder memory
Delete Application
Starting Neo Navigation
Mobile Web menu
Sound settings
Display settings
Phone settings
Call settings
Memory
Bluetooth
Phone info
Camera
Voice commands
Voice commands settings
Voice commands info
Alarm clock
Calendar
World clock
Notepad
Calculator
Stop watch
Mass storage
MENU FUNCTIONS
ONE, TWOTOUCH DIALING
Ideal for frequently dialed numbers, this feature allows Phonebook entries to
be dialed via the keypad with only one or two key presses.
2008.11.3 5:4:58 PM
Recent Calls
ALL CALLS
MISSED CALLS
RECEIVED CALLS
Displays information about the most recently received, dialed and missed calls.
Displays information about the 90 most recently missed calls. Place a call to a
missed call by simply pressing the SEND Key .
Displays information about the 90 most recently received calls. Place a call to a
received call by simply pressing the SEND Key .
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Recent Calls”, then slide out the QWERTY keyboard and press
2. Missed Calls.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Recent Calls”, then slide out the QWERTY keyboard and press
3. Received Calls.
2. Press the Directional Key
2. Press the Directional Key
ACCESS AND OPTIONS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu].
then press the Left Soft Key
2. Press the Directional Key
to select the “Recent Calls” menu.
3. Select a submenu.
1. All Calls
2. Missed Calls
3. Received Calls
4. Dialed Calls
5. Call Timers
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Recent Calls”, then slide out the QWERTY keyboard and press
1. All Calls.
2. Press the Directional Key
up or down to highlight an entry, then:
• Press the OK Key [OK] to view the entry.
• Press the SEND Key to place a call to the number.
• Press the Right Soft Key
[Options] to select:
Save: To store the phone number in your Phone Book.
Prepend: To add a desired number before the number. For example, It is useful when
adding “1” for a long distance call. You may save it in the phone book after entering the
Prepend.
New Text Message: To send a Text message to the contact.
New Picture Message: To send a Picture message to the contact.
Erase All: To erase all All Call entries.
• Press the Left Soft Key
[Erase] to erase a call listing.
After the 270th received, dialed or missed calls, the oldest call will automatically be
erased from the history.
up or down to highlight an entry, then:
• Press the OK Key [OK] to view the entry.
• Press the SEND Key to place a call to the number.
• Press the Right Soft Key
[Options] to select:
Save: To store the phone number in your Phone Book.
Prepend: To add a desired number before the number. For example, It is useful when
adding “1” for a long distance call. You may save it in the phone book after entering the
Prepend.
New Text Message: To send a Text message to the contact.
New Picture Message: To send a Picture message to the contact.
Erase All: To erase all Missed Call entries.
• Press the Left Soft Key
[Erase] to erase a call listing.
After 90 missed calls, the oldest call will automatically be erased from the history.
up or down to highlight an entry, then:
• Press the OK Key [OK] to view the entry.
• Press the SEND Key to place a call to the number.
• Press the Right Soft Key
[Options] to select:
Save: To store the phone number in your Phone Book.
Prepend: To add a desired number before the number. For example, It is useful when
adding “1” for a long distance call. You may save it in the phone book after entering the
Prepend.
New Text Message: To send a Text message to the contact.
New Picture Message: To send a Picture message to the contact.
Erase All: To erase all Received Call entries.
• Press the Left Soft Key
[Erase] to erase a call listing.
After 90 received calls, the oldest call will automatically be erased from the history.
Recent Calls
RECENT CALLS
The Recent Calls menu is a list of the last phone numbers or Phonebook entries
for calls you placed, accepted or missed. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed
from the bottom of the list.
Shortcut: To view a quick list of all your calls, press the SEND Key from standby
mode.
34
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 34-35
Menu Function − Chapter 4
35
2008.11.3 5:4:59 PM
CALL TIMERS
Entries can be retrieved by name or group.
Displays information about the 90 most recently dialed numbers. Place a call
to a dialed call by simply pressing the SEND Key .
Checks the usage time and manages your calls within the limit you set.
The 11 timers include (Last Call, All Calls, Received Calls, Dialed Calls, Home
Calls, Roaming Calls, Transmit KB, Incoming KB, Total KB, Lifetime Calls,
Lifetime Data Counter):
NEW ENTRY
LIST ENTRIES
To add a new number to your Phonebook List:
You can review all the entries stored in your Phone Book List or quickly find an
entry by entering a name or its character string.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to
select “Recent Calls”, then slide out the QWERTY keyboard and press
5. Call Timers.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to
select “Phone Book”, then slide out the QWERTY keyboard and press
1. New Entry.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Recent Calls”, then slide out the QWERTY keyboard and press
4. Dialed Calls.
2. Press the Directional Key
up or down to highlight an entry, then:
• Press the OK Key [OK] to view the entry.
• Press the SEND Key to place a call to the number.
• Press the Right Soft Key
[Options] to select:
Save: To store the phone number in your Phone Book.
Prepend: To add a desired number before the number. For example, It is useful when
adding “1” for a long distance call. You may save it in the phone book after entering the
Prepend.
New Text Message: To send a Text message to the contact.
New Picture Message: To send a Picture message to the contact.
Erase All: To erase all Dialed Call entries.
• Press the Left Soft Key
[Erase] to erase a call listing.
After 90 dialed calls, the oldest call will automatically be erased from the history.
up or down to highlight a call timer.
2. Press the Directional Key
Call timers include:
Last Call/All Calls/Received Calls/Dialed Calls/Home Calls/Roaming
Calls/Transmit KB/Incoming KB/Total KB/Lifetime Calls/Lifetime Data
Counter
• Press the Left Soft Key
• Press the Right Soft Key
[Reset] to reset highlighted timer.
[Reset All] to reset all timers.
Using this submenu, the number is saved as a new Phonebook entry.
To save the number into an existing Phonebook entry, edit the Phonebook entry.
2. Enter the name, then press the Directional Key
down. To change
the input mode, press the Left Soft Key
[Abc].
down to enter information in other
3. Press the Directional Key
fields for the entry. Fields include:
Mobile/Home/Work/E-mail 1/Group/Picture/Ringtone/Pager/
Fax/E-mail 2
If entering information in a phone number field, press the Right Soft
Key
[Options] to select one of the following options:
1. Hard Pause/2. 2 Sec Pause
4. Press the OK Key
36
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 36-37
[SAVE].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Phone Book”, then slide out the QWERTY keyboard and press
2. List Entries. Or in standby mode, press the Right Soft Key
[Phonebook]. The list of names in your Phone Book List is displayed
alphabetically.
2. Enter a name or part of a name in the Search Field at the bottom
of the screen or press the Directional Key
up or down to scroll
through your Phone Book List.
3. To edit the entry, press the Left Soft Key
details, press the OK Key [VIEW].
[Edit]. To view entry
• By pressing the Right Soft Key
[Options], you can choose from the following:
1. New Entry: To add a New Phone Number.
2. Prepend: To add a desired number before the number. For example, It is useful when
adding “1” for a long distance call. You may save it in the phone book after entering the
Prepend.
3. Erase: To delete the entry.
Menu Function − Chapter 4
Phone Book
Recent Calls
For additional details on how to add a new Phonebook entry, see page 26.
DIALED CALLS
37
2008.11.3 5:5:0 PM
“Phone Book”, then slide out the QWERTY keyboard and press
3. Message Groups.
2. Press the Directional Key
up or down to select the group where
you want to add the entry, and then press the Right Soft Key
[Options].
4. To call the selected number, press the SEND Key .
MESSAGE GROUPS
Allows the user to create a message group with up to 10 phone numbers. The
user can add, change, and delete Message Groups.
TO ADD NEW MESSAGE GROUP
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Phone Book”, then slide out the QWERTY keyboard and press
3. Message Groups.
2. Press the Left Soft Key
[New].
3. Enter a new message group name, then press the OK Key
[SAVE].
TO ASSIGN PHONE NUMBER TO GROUP
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
38
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 38-39
[Options]. The default groups Family, Friends, Colleagues and
Business cannot be changed.
3. Select “Rename”.
press the Left Soft Key
[Menu], the Directional Key
to select
“Phone Book”, then slide out the QWERTY keyboard and press
3. Message Groups.
3. Select “Add”.
ERASE GROUP
2. Press the Directional Key
up or down to select the message
group you want to send a message to then press the Right Soft Key
[Options].
4. Your Phonebook entries will be displayed in alphabetical order. Select
the entry you want to add then press the Left Soft Key
[Mark/
Unmark].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Phone Book”, then slide out the QWERTY keyboard and press
3. Message Groups.
4. Input your message in the Text Field and then press the Right Soft
Key
[Options] to select “Read Message”, “Save As Draft”, “Add
Quick Text”, “Priority Level”, “Delivery ACK” or “Cancel Message”.
5. Press the OK Key
displayed.
[OK]. “Entry added to message group” will be
TO CHANGE GROUP NAME
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Phone Book”, then slide out the QWERTY keyboard and press
3. Message Groups.
2. Press the Directional Key
up or down to select the message
group you want to rename then press the Right Soft Key
4. Enter the new group name, then press the OK Key
[SAVE].
3. Press “1. Text Message”.
2. Press the Directional Key
up or down to select the existing
message group name that you want to erase, and then press the
Right Soft Key
[Options]. The default groups Family, Friends,
Colleagues and Business cannot be erased.
5. To send the Text message, press the OK Key
SEND Key .
3. Select “Erase”. “Erase message group?” will appear on the screen.
TO SEND A TEXT MESSAGE TO A GROUP
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Phone Book”, then slide out the QWERTY keyboard and press
3. Message Groups.
1. From standby mode, press the OK Key
2. Press the Directional Key
4. Press the Right Soft Key
[Yes]. A confirmation message appears.
[OK] to unlock the keypad,
[SEND] or press the
TO SEND A PICTURE MESSAGE TO A GROUP
Phone Book
Phone Book
4. Text Message: To create a Text Message.
5. Picture Message: To create a Picture Message.
6. Erase All: To delete all Phone Book entries.
up or down to select the message
Menu Function − Chapter 4
39
2008.11.3 5:5:1 PM
3. Press “2. Picture Message”.
4. Under “Text”, input your message and then press the Directional Key
down.
5. Under “Picture”, press the Left Soft Key
[Add] to select the
picture you would like to send then press the OK Key [OK].
GROUPS
3. Select “Rename”.
Groups allows you to classify phone entries into groups with up to 10
numbers in each group. The default groups include No Group, Family, Friends,
Colleagues and Business and they cannot be erased or renamed.
4. Enter the new group name, then press the OK Key
TO ADD NEW GROUP
[Add] to select the sound
6. Under “Sound”, press the Left Soft Key
you would like to send then press the OK Key [OK].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to
select “Phone Book”, then slide out the QWERTY keyboard and press
4. Groups.
7. Under “Subject”, input a subject.
2. Press the Left Soft Key
[Options] to select “Preview”, “Read
8. Press the Right Soft Key
Message”, “Save As Draft”, “Add Quick Text”, “Add Slide”, “Priority
Level”, “Remove Picture”, “Remove Slide”, “Remove Sound” or “Cancel
Message”.
3. Enter a new group name, then press the OK Key
These options will vary depending on the message contents chosen.
9. To send the Picture Message, press the OK Key
the SEND Key .
40
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 40-41
[SEND] or press
[New].
[SAVE].
TO CHANGE GROUP NAME
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to
select “Phone Book”, then slide out the QWERTY keyboard and press
4. Groups.
up or down to select the group you
2. Press the Directional Key
want to rename then press the Right Soft Key
[Options].
SPEED DIALS
[SAVE].
ERASE GROUP
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to
press the Left Soft Key
select “Phone Book”, then slide out the QWERTY keyboard and press
4. Groups.
2. Press the Directional Key
up or down to select the existing group
name that you want to erase, and then press the Right Soft Key
[Options].
3. Select “Erase”. “Erase entry from group?” will appear on the screen.
4. Press the Right Soft Key
[Yes]. A confirmation message appears.
In idle mode, calls can be placed to numbers stored in speed dial by sliding
out the QWERTY keyboard, and pressing & holding the location number on
the key pad. For a 2-digit location number, press the first number and then
press and hold the second number. Speed Dial 1 is assigned to Voice Mail and
cannot be changed.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
”Phone Book”, then slide out the QWERTY keyboard and press
5. Speed Dials.
2. Press the Directional Key
up or down to highlight the Speed
Dial position, or enter the Speed Dial digit, then press the OK Key
[SET].
3. Press the Directional Key
press the OK Key [OK].
up or down to highlight the entry then
up or down to highlight the number
4. Press the Directional Key
you wish to select then press the OK Key [OK].
5. Press the Right Soft Key
Phone Book
Phone Book
group you want to send a message to then press the Right Soft Key
[Options].
[Yes]. A confirmation message appears.
“Unassigned” appears if the location is available.
Menu Function − Chapter 4
41
2008.11.3 5:5:3 PM
Phone Book
SOUND BOX
PICTURE BOX
This menu displays the list of downloaded ringtones.
This menu displays the list of pictures taken with the Camera.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Media Gallery”, then slide out the QWERTY keyboard and press
1. Sound Box.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Media Gallery”, then slide out the QWERTY keyboard and press
2. Picture Box.
2. Press the Right Soft Key
[OPTIONS] to choose from the
following:
1. Send/2. Rename/3. Set As/4. Move/5. Erase All/6. File Info.
2. Press the Right Soft Key
[OPTIONS] to choose from the
following:
1. Send/2. My Movilnet Space/3. Set As/4. Rename/5. Move/6. Erase
All/7. File Info
2. Press the Directional Key
entry you want to erase.
3. Press the Left Soft Key
4. Press the Right Soft Key
up or down to select the Speed Dial
[Erase].
[Yes]. A confirmation message appears.
3. Scroll through the downloaded sounds to display the sound you want
[OPTIONS], then select
to send. Press the Right Soft Key
“1. Send”. Press the OK Key .
Since you can’t Send or Move a DRM file, the Send/Move options will not appear when
working with this type of file.
42
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 42-43
3. Scroll through the downloaded images to display the image you
[OPTIONS], then select
want to send. Press the Right Soft Key
“1. Send”. Press the OK Key .
Menu Function − Chapter 4
Media Gallery
TO ERASE A SAVED SPEED DIAL
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
”Phone Book”, then slide out the QWERTY keyboard and press
5. Speed Dials.
43
2008.11.3 5:5:4 PM
Media Gallery
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Media Gallery”, then slide out the QWERTY keyboard and press
3. MP3 Box.
[OPTIONS] to choose from the
2. Press the Right Soft Key
following:
1. Setting: To select music file playback options. (1. Normal,
2. Repeat, 3. Repeat All, 4. Shuffle)/2. Set As/3. Mark All/Unmark All/
4. Erase/5. Erase All/6. File Info
When setting an MP3 file from a microSD card as a ringtone (Options –> Set As –>
Ringtone), the MP3 file will be moved to the internal memory and will not appear on
the MP3 Box list any more. You can see the saved MP3 file on the ringtone list (Settings
–> Sound Settings –> Call Sounds –> Call Ringtone).
44
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 44-45
Your phone provides a unique feature -Neo Applications- that enables
you to download melody ringtones, wallpapers, games and more from
your network to your phone. Please contact your service provider for the
availability of these services.
Shortcut: In idle mode, press the Directional Key
left to access Neo Applications.
STARTING NEO APPLICATIONS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Neo Applications”, then slide out the QWERTY keyboard and press
1. Neo Applications. Or, in standby mode, press the Directional Key
left.
2. When three or more icons appear on the screen, select an application
.
with the Directional Key
3. To start the application, press the OK Key
DOWNLOADING APPLICATIONS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Neo Applications”, then slide out the QWERTY keyboard and press
1. Neo Applications. Or, in standby mode, press the Directional Key
left.
2. Select “ Neo Aplicaciones” with the Directional Key
press the OK Key .
3. Select “Catalog” and press the OK Key
then
.
4. The phone will access your service provider’s server. Follow the
prompt to download applications.
• To select an option, press the Directional Key
then press the OK Key
• When a prompt appears, press the OK Key to proceed or the CLR Key
to cancel.
.
.
4. To end the application, press the END Key . The phone will return
to the idle mode.
DOWNLOADING MELODIES/WALLPAPERS
Before downloading melody ringtones and wallpapers, you need to
download the dedicated downloader. Please contact your service provider
for details.
Menu Function − Chapter 4
Neo Applications
MP3 BOX
This menu appears when using a micro SD card. To play music through your
phone, copy downloaded music from your PC to the card then insert the card
into your phone.
45
2008.11.3 5:5:5 PM
Neo Applications
DELETE APPLICATION
Downloaded melody ringtones, wallpapers and applications are saved to the
data folder in your phone.
CHECKING DATA FOLDER MEMORY
Downloaded melody ringtones, wallpapers and applications are saved to the
data folder in your phone.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Neo Applications”, then slide out the QWERTY keyboard and press
1. Neo Applications. Or, in standby mode, press the Directional Key
left.
2. Select “Settings” with the Directional Key
Key .
and press the OK
3. Select “Manage Apps” with the Directional Key
OK Key .
4. To exit, press the END Key .
46
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 46-47
and press the
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Neo Applications”, then slide out the QWERTY keyboard and press
1. Neo Applications. Or, in standby mode, press the Directional Key
left.
2. Select “Settings” with the Directional Key
Key .
and press the OK
3. Select “Manage Apps” and press the OK Key
.
4. Select the application to be erased with the Directional Key
press the OK Key .
5. Select “Remove” then press the OK Key
6. Select “Yes” then press the OK Key
HOME
Returns the user to the home page.
STARTING NEO NAVIGATION
.
.
then
LAUNCHING MOBILE WEB 2.0
Now you can access news, sports, weather, and e-mail from your TXT8010.
Mobile Web 2.0 keeps you updated by providing access to up-to-date
information such as news, sports, weather and stock quotes when you
subscribe to Internet service with your service provider. Please contact your
service provider for a list of available websites and service details.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Neo Navigation”, then slide out the QWERTY keyboard and press
1. Connect WAP.
Shortcut: In idle mode, press the Directional Key
right to access Neo Navigation.
MOBILE WEB MENU
MOBILE WEB MENU
The Mobile Web menu lists the actions necessary to operate Mobile Web.
To access the Mobile Web menu, press the Left Soft Key [Menu], 6. Neo
Navigation, 1. Connect WAP. Or, in standby mode, press the Directional Key
right, then 1. Connect WAP.
BACK
Returns to the previously viewed page.
FORWARD
To forward to the next page.
GO TO URL
To access the Web site directly by entering the address.
REFRESH
To refresh the current page.
HISTORY
To view a list of Web pages and Web addresses that you have visited
or tried to visit.
SHOW URL
To display the URL address of the page to which you are currently
connected.
Menu Function − Chapter 4
Neo Navigation
APPLYING MELODIES/WALLPAPERS
Downloaded melody ringtones apply to several functions including the
incoming call alert, new text message alert, alarm clock and scheduler
alarm. Downloaded wallpapers apply to the idle mode.
47
2008.11.3 5:5:6 PM
Neo Navigation
• Connection Time Out: When the Connection Timeout item is selected from the Settings
menu, the user can set the connection timeout. The connection timeout determines how
long the browser will wait for a response from the network for a network request.
•
•
•
•
ADVANCED
Clear Cache: Clears the cache.
Clear History: Clears the list of recently visited URLs.
Clear Cookies: Clears saved cookies.
Autofill: Automatically fills in character for browser recognized words.
SETTINGS
Select this option to access:
• Downloads: Selecting the “Downloads” item allows the user to enable/disable
downloading images, background sounds, and object downloads when a URL is accessed.
• Restart Browser: Selecting “Restart Browser” causes the history and cache to be cleared
and returns the user to the homepage.
• Scroll Mode: Selecting “Scroll Mode” from the Settings menu allows the user to select the
way text scrolls and the scroll speed.
• Send Referrer: When the “Send Referrer” item is selected from the Settings menu, the user
can turn on or off sending the referrer URL.
• Key Press Time Out: When the “Key Press Timeout” item is selected from the Settings
menu, the user can set the key press timeout as fast, medium or slow. Medium is 1.5 seconds, slow 2 seconds and fast is 1 second. The key press timeout is the period of time after
which the cursor auto-advances to the next entry position. In most cases, a single key can be
used to enter more than one character. Each time the key is pressed the last character of the
line is replaced by the next choice for that key. As long as the same key is repressed within
key press timeout, the last character cycles between all the choices for the key.
48
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 48-49
• About: Displays the name of the supplier of the Browser and the Browser SW version.
• Encryption: Displays the following list of options.
1. Authentication: Gives the option to turn Authentication Caching ON or OFF.
2. Root Certificate: Shows the root security keys for TLS.
3. Current Certificate: Shows the current site security key for TLS (if applicable).
EXIT
To exit Mobile Web, select È or press the END Key to exit out of the
browser and return to idle mode.
2. Press the Directional Key
up or down to select “DTMF” or
“Instrument”, then press the OK Key [OK].
SOUND SETTINGS
RINGER VOLUME
To adjust the ringer volume:
CALL SOUNDS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 1. Ringer Volume.
To set ringtones for types of incoming calls:
2. Press the Directional Key
up, down, left or right to select one of
the following settings, then press the OK Key [SET].
Silent/Vibrate On/Level 1 ~ Level 5
Press the Left Soft Key
[Play/Stop] to play/stop sound.
DIAL SOUNDS
To select the dial sound type:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 2. Dial Sounds.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 3. Call Sounds.
CALL RINGTONE
1. From standby mode, press the OK Key [OK] to unlock the keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and press
1. Sound Settings, 3. Call Sounds, 1. Call Ringtone.
up or down to select a ringtone,
2. Press the Directional Key
then press the OK Key [OK] to save the sound. To play the
ringtone, press the Left Soft Key [Play/Stop].
Menu Function − Chapter 4
Settings
MANAGE MEMORY
Select this option to manage the browser memory including:
49
2008.11.3 5:5:8 PM
2. Press the Directional Key
up or down to select “On” or “Off”,
then press the OK Key [OK].
2. Select “Tone”, “Vibrate” or “Reminder” by pressing the Directional
up or down and then select one of the following options
Key
by pressing the Directional Key
up or down:
• Tone: Ringtones or select your desired ringer type by pressing the Directional Key
up or down. Press the Left Soft Key
[Play/Stop] to play/stop sound.
• Vibrate: Select “On” or “Off”.
• Reminder: Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”.
3. To save, press the OK Key
[OK].
MSG SOUNDS
PIX MESSAGE
To select a ringer type for Incoming messages:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 1. Sound Settings, 4. Msg Sounds, 2. Pix Message.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 4. Msg Sounds.
TXT MESSAGE
1. From standby mode, press the OK Key [OK] to unlock the keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and press
1. Sound Settings, 4. Msg Sounds, 1. TXT Message.
50
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 50-51
2. Select “Tone”, “Vibrate” or “Reminder” by pressing the Directional
up or down and then select one of the following options
Key
by pressing the Directional Key
up or down:
• Tone: Ringtones or select your desired ringer type by pressing the Directional Key
up or down. Press the Left Soft Key
[Play/Stop] to play/stop sound.
• Vibrate: Select “On” or “Off”.
• Reminder: Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”.
3. To save, press the OK Key
[OK].
VOICEMAIL MSG
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 1. Sound Settings, 4. Msg Sounds, 3. Voicemail MSG.
2. Select “Tone”, “Vibrate” or “Reminder” by pressing the Directional
Key
up or down and then select one of the following options
up or down:
by pressing the Directional Key
• Tone: Ringtones or select your desired ringer type by pressing the Directional Key
up or down. Press the Left Soft Key
[Play/Stop] to play/stop sound.
• Vibrate: Select “On” or “Off”.
• Reminder: Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”.
3. To save, press the OK Key
[OK].
SERVICE ALERTS
To set any of the three Alert options to either On or Off:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 5. Service Alerts.
2. Press the Directional Key
up or down to select one of the
following options, then press the OK Key [OK].
• Roam: The Enhanced Roaming Indicator (ERI) feature displays a text banner on the
display screen informing the handset user of which systems the wireless device is using
as compared to the service plan they purchased. The ERI Banner text changes to tell a
customer if they are using the: “Extended Network” or “Roaming”.
• Minute Beep: Alerts you every minute during a call.
• Call Connect: Alerts you when a call is connected.
3. Press the Directional Key
press the OK Key [OK].
up or down to select “On” or “Off”, then
POWER ON/OFF
To set the phone to sound a tone when the phone is powered on/off:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 6. Power On/Off.
Settings
Settings
CALL VIBRATE
1. From standby mode, press the OK Key [OK] to unlock the keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and press
1. Sound Settings, 3. Call Sounds, 2. Call Vibrate.
2. Press “1. Power On Tone” or “2. Power Off Tone”.
3. Press the Directional Key
press the OK Key [OK].
up or down to select “On” or “Off”, then
Menu Function − Chapter 4
51
2008.11.3 5:5:9 PM
KEY TONE
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 1. Sound
Settings, 7. Key Tone.
2. Adjust the volume by pressing the Directional Key
up, down, left
or right, then press the OK Key [OK] to save the setting.
Silent/Level 1 ~ Level 5
DISPLAY SETTINGS
Allows you to customize the display.
MY BANNER
The text greeting can be up to 16 characters and is displayed on your phone’s screen
in idle mode.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 2. Display
Settings, 1. My Banner.
52
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 52-53
2. Enter your banner text (up to 16 characters) then press the OK Key
[OK].
BACKLIGHT DURATION
To set the duration for backlight illumination for the Main Screen and Keypad:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 2. Display
Settings, 2. Backlight Duration.
2. Press “1. Display” or “2. Keypad”.
3. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
7 Seconds/15 Seconds/30 Seconds/Always On/Always Off
Even if “Always On” is selected for the Backlight setting, the backlight will turn off when
the phone is closed.
“Settings”, then slide out the QWERTY keyboard and press 2. Display
Settings, 3. Contrast.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
Level 1 ~ Level 5
Settings, 5. Clock Format.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
Digital/Analog/Digital+Analog/Off
MENU TYPE
WALLPAPER
To change Main Menu layout and type:
To choose the kind of background to be displayed on the phone:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 2. Display
Settings, 6. Menu Type.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 2. Display
Settings, 4. Wallpaper.
2. Select from the available screens, then press the OK Key
To view the image, press the Left Soft Key [View].
[OK].
2. Press the Directional Key
up or down to select “Graphic Type” or
“List Type”, then press the OK Key [OK].
PHONE SETTINGS
CLOCK FORMAT
CONTRAST
To choose the kind of clock to be displayed on the LCD screen:
AIRPLANE MODE
To adjust the display contrast:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 2. Display
In Airplane Mode, all menu functions can be accessed except making calls, receiving
calls, data connection and Bluetooth®. Activating Airplane Mode will disable all
wireless communications. In the Airplane Mode, services that support Location On
functions like Chaperone are temporarily disabled.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
Menu Function − Chapter 4
Settings
Settings
To set the keypad tone:
53
2008.11.3 5:5:10 PM
Settings
2. Press the Directional Key
press the OK Key [OK].
2. Press the Directional Key
press the OK Key [OK].
MESSAGE READOUT
up or down to select “On” or “Off”, then
“Settings”, then slide out the QWERTY keyboard and press 3. Phone
Settings, 3. Menu Readout.
up or down to select “On” or “Off”, then
LANGUAGE
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 3. Phone
Settings, 2. Language.
SECURITY
up or down to select “English” or
2. Press the Directional Key
“Español”, then press the OK Key [OK].
MENU READOUT
To turn the Menu Readout on/off:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
54
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 54-55
up or down to select “On“ or “Off”, then
LOCATION
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 3. Phone
Settings, 5. Location.
2. Press the Directional Key
up or down to select one of the
up or down to select one of the
4. Press the Directional Key
following settings, then press the OK Key [OK].
• Lock Now: Phone is locked.
• Unlocked: Phone is unlocked.
• On Power Up: Phone will lock when it is turned on.
EDIT CODE
To set a new Lock Code:
The default lock code is “1234”.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 3. Phone
Settings, 4. Message Readout.
2. Press the Directional Key
press the OK Key [OK].
[OK].
• E911 Only: Your location will be hidden from the network and applications, except
for 911.
• Location On: Your location is now available to the network.
The Security menu allows you to electronically secure the phone.
To turn the Message Readout on/off:
To set the bilingual feature to either English or Spanish:
following settings, then press the OK Key
LOCK MODE
This setting specifies whether the phone should be locked whenever it is turned on.
Lock Mode prevents the unauthorized use of your phone. Once the phone is locked, it
is in restricted mode until the Lock Code is entered. You can still make emergency calls.
You can modify the Lock Code using the new Lock code within the Security menu.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 3. Phone Settings, 6. Security.
2. Enter the four-digit Lock Code, then press the OK Key
The default lock code is “1234”.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 3. Phone Settings, 6. Security.
3. Press “2. Edit Code”.
2. Enter the four-digit Lock Code, then press the OK Key
The default lock code is “1234”.
5. Press the OK Key
3. Press “1. Lock Mode”.
[OK].
[OK].
4. Enter the new four-digit code in the “New Code” field. Enter the
new four-digit code in the “Confirm Code” field.
Settings
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 3. Phone
Settings, 1. Airplane Mode.
[OK].
RESET PHONE
To delete all User Data and reset all settings to their initial defaults:
Menu Function − Chapter 4
55
2008.11.3 5:5:12 PM
2. Enter the four-digit Lock Code, then press the OK Key
The default lock code is “1234”.
[OK].
3. Press “3. Reset Phone”.
4. After reading the warning message that appears, press the Right
[Yes].
Soft Key
5. The phone will turn off and then back on again automatically.
NAM SELECTION
Enables Auto NAM (Number Assignment Modules) or manually selects a NAM.
AUTO NAM
press 3. Phone Settings, 7. NAM Selection.
up or down to select “1. Auto NAM”,
2. Press the Directional Key
then press the OK Key [OK].
3. Select “On” or “Off”, then press the OK Key
CHANGE NAM
1. From standby mode, press the OK Key [OK] to unlock the key[Menu], the Directional Key
pad, press the Left Soft Key
to select “Settings”, then slide out the QWERTY keyboard and press
3. Phone Settings, 7. NAM Selection.
up or down to select “2. Change
2. Press the Directional Key
NAM”, then press the OK Key [OK].
3. Select “NAM 1 - MOVILNET” or “NAM 2 - MOVILNET” , then press
the OK Key [OK].
Automatically switches phone to proper NAM when you have multiple NAM
registrations.
CALL SETTINGS
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
To determine how to handle an answered call:
56
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 56-57
[OK].
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
Slide Open/Any Key/Auto Answer/Send Key
• When the phone is closed, the Auto Answer Mode will not function.
• The Auto Answer Mode will function after about five seconds.
AUTO RETRY
To set the length of time the phone waits before automatically redialing a number
when the attempted call fails:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 2. Auto Retry.
up or down to select one of the
2. Press the Directional Key
following settings, then press the OK Key [OK].
Off/7 Seconds/10 Seconds
ANSWER OPTIONS
1. From standby mode, press the OK Key
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 1. Answer Options.
[OK] to unlock the keypad,
TTY MODE
You can attach a TTY device to your phone enabling you to communicate with
parties also using a TTY device. A phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into characters and then displayed
on the TTY.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 3. TTY Mode.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
TTY Full/TTY + Talk/TTY + Hear/TTY Off
ONE TOUCH DIAL
To initiate a speed dial call by holding down the speed dial digit:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 4. One Touch Dial.
2. Press the Directional Key
Settings
Settings
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 3. Phone Settings, 6. Security.
up or down to select “On” or “Off”, then
Menu Function − Chapter 4
57
2008.11.3 5:5:14 PM
press the OK Key
1. Save Options.
[OK].
If One Touch Dial is disabled, Speed Dial numbers designated in your Phone Book will
not function.
To turn the voice privacy feature On or Off:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 5. Voice Privacy.
2. Press the Directional Key
press the OK Key [OK].
up or down to select “On” or “Off”, then
MEMORY
[OK] to select “1. Picture”.
INTERNAL MEMORY
To check the available Internal Memory capacity, used capacity, and total capacity:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 5. Memory,
2. Internal Memory.
2. Press the OK Key
[OK] to return to the previous screen.
SAVE OPTIONS
EXTERNAL MEMORY
To select whether to save to Internal Memory or to External Memory when saving
a file:
To check the available External Memory capacity, used capacity, and total capacity:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 5. Memory,
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
58
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 58-59
Memory card must be inserted into the phone to perform these functions.
2. Press the OK Key
[OK] to return to the previous screen.
Important: Features using Bluetooth technology, or allowing such features to run in
the background while using other features, increase the demand on battery power and
reduce the battery life.
BLUETOOTH ON/OFF
BLUETOOTH
To toggle Bluetooth® power On/Off:
Bluetooth technology connectivity enables wireless connections between
electronic devices. If connected with a Bluetooth Handsfree device, you can
use your phone more freely. Since devices with Bluetooth connectivity communicate using radio waves, your phone and the other device do not need to
be in direct line-of-sight. The two devices only need to be within 10 meters
(30 feet) of each other. The connection can be subject to interference from
obstructions such as walls or other electronic devices.
This device is compliant with Bluetooth specification 2.0, supporting the
following profiles: HSP V1.0 (headset profile), AVRCP V1.0 (stereo profile), HFP
V1.5 (handsfree car kit profile) and File Transfer. To ensure interoperability
between other devices supporting Bluetooth technology, use approved
enhancements for this model. Check with the manufacturers of other devices
to determine their compatibility with this phone. There may be restrictions on
using Bluetooth technology in some locations. Check with your local authorities or PCD Personal Communications. If you want more information on this
function, visit the Bluetooth Technology organization Web site:
https://www.bluetooth.org/.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press
6. Bluetooth.
2. Press the Left Soft Key
appears.
[On/Off]. A Confirmation window
NEW DEVICE
Pairing is the process that allows the handset to locate, establish and register a
1-to-1 connection with the target device.
Settings
Settings
VOICE PRIVACY
2. Press the OK Key
3. Press the Directional Key
up or down to select one of the
following settings, and then press the OK Key [OK].
Internal Memory/External Memory
“Settings”, then slide out the QWERTY keyboard and press 5. Memory,
3. External Memory.
1. Follow the Bluetooth® accessory instructions to set the device to
pairing mode.
2. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the Left Soft Key
[Menu], the Directional Key
to select “Settings” menu, then slide out the QWERTY keyboard, and
Menu Function − Chapter 4
59
2008.11.3 5:5:15 PM
[OK] or select
3. If the Bluetooth® power is switched off, the following message will
appear on the LCD screen: “TURN BLUETOOTH POWER ON?” Press the
Right Soft Key
[Yes].
4. The handset will prompt you with the following message on the LCD
screen: “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE
MODE”. Press the OK Key [OK].
5. The device will appear in the “NEW DEVICE” menu. Press the
up or down to select the device you wish to pair
Directional Key
to, then press the Left Soft Key
[Pair].
6. The handset will prompt you for the passkey. Consult the Bluetooth®
accessory (sold separately) instructions for the appropriate passkey
(typically “0000”—4 zeroes). Enter the passkey, then press the OK
Key [OK].
You do not need to input the passkey for pairing when the passkey of the Bluetooth®
Headset or hands-free kit is 0000.
7. Once connected, you will see the device listed in the Bluetooth and
the Bluetooth® device connected icon will appear at the top of the
60
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 60-61
LCD screen when connected to the Bluetooth® device.
You can also check out the connection with an Arrow icon on the
Bluetooth.
• In the Bluetooth, you can disconnect the connected device with an icon by pressing
the OK Key [Drop]. Conversely, you can reconnect by pressing the OK Key
[OK] again.
• When an audio device is connected, you can select another device and the connection
is automatically transferred from that audio device to the other one.
• If multiple devices are displayed, select the devices you want to connect.
OPTIONS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press
6. Bluetooth.
• Service Discovery: To search for the services that the selected device supports.
• Send Picture: Send photos stored in Picture Gallery to a selected device.
• Device Info: Displays device information.
If ”Send Picture“ selected, FILE TRANSFER support only jpg(jpeg) file.
2. Press the Right Soft Key
SETTINGS
MY PHONE NAME
To edit the Bluetooth® name of your phone:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
2. Press the Right Soft Key
[Options].
2. Press the Directional Key
up or down to select the paired device.
3. Press the Right Soft Key
[Options].
4. Use the numeric keypad to enter a new custom name.
• Remove Device: Removes a device from the pairing list.
• Rename Device: Renames a paired device.
5. Press the OK Key
[Options].
3. Press “2. Discovery Mode”.
3. Press “1. My Phone Name”.
up or down to select one of the
4. Press the Directional Key
following options, then press the OK Key [OK].
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
[OK] to save and exit.
DISCOVERY MODE
To set whether your device is able to be searched for by other Bluetooth® devices in
the area:
If Bluetooth power is not on, you will be prompted to turn it on in order to proceed.
4. Press the Directional Key
up or down to select “On” or “Off”,
then press the OK Key [OK].
SUPPORTED PROFILES
To view brief descriptions of the profiles supported by the phone:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
2. Press the Right Soft Key
Settings
Settings
press 6. Bluetooth. Press the OK Key
“1. New Device”.
[Options].
3. Press “3. Supported Profiles”.
4. Press the Directional Key
up or down to select one of the
Menu Function − Chapter 4
61
2008.11.3 5:5:16 PM
following profiles, and then press the OK Key
Headset/Handsfree/Stereo/File Transfer
[VIEW].
AUTO PAIR HANDSFREE
1. From standby mode, press the OK Key [OK] to unlock the
[Menu], the Directional Key
keypad, press the Left Soft Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
2. The following information appears:
Mobile Device Number (MDN)/Mobile Identifications Number (MIN)/
Other device information
SW VERSION
3. Press “4. Auto Pair Handsfree”.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Settings”, then slide out the QWERTY keyboard and press 7. Phone
Info, 2. SW Version.
4. Press the Directional Key
up or down to select “On” or “Off”,
then press the OK Key [OK].
2. Displays the Software Version/Hardware Version/PRL Version/Browser
Version/Neo Version.
2. Press the Right Soft Key
[Options].
PHONE INFO
MY NUMBER
To view your phone number:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
62
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 62-63
3. Press the OK Key
[OK] to return to the previous screen.
CAMERA
TAKE PICTURE
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Camera”, then slide out the QWERTY keyboard and press 1. Take a
Picture. Or, to access the camera, press the Side Camera Key when
slide is opened.
If the slide is closed, unlock the keypad by pressing the OK Key
Camera Key to access the camera view mode.
[OK]. Press the Side
2. Point the camera lens at your subject. You can check the picture
framing through the display screen.
3. Settings...:
• Resolution: To select a resolution for a picture. (1280x960/640x480/
320x240/160x120)
• Quality: To select a picture quality. (High/Medium/Low)
• Shutter Sound: To select a shutter sound. (Off/Default/Say “Cheese”/Ready! 123)
To view captured images, press the Left Soft Key
3. Press the Side Camera Key or press the OK Key
the picture.
[Gallery].
[TAKE] to take
4. After taking the picture it will be displayed.
[Save].
To save the picture, press the Left Soft Key
To take another picture without saving the picture you just took,
press the Right Soft Key
[Erase].
To send the picture to someone, press the OK Key [SEND].
• Press the Directional Key left/right: Zoom Down/Up.
(Except 1280X960 mode).
• Pressing the Right Soft Key
[Options], you can choose from the following:
1. Self Timer: To activate the camera’s timer function.
(Off/3 Seconds/5 Seconds/10 Seconds)
2. Image Controls...:
• Brightness: To brightness up/down( -2, -1, 0, 1, 2).
• White Balance: To select a white tone balance. (Auto/Sunny/Cloudy/Tungsten/
Fluorescent)
• Color Effect: To select picture effects. (Normal/Gray/Sepia/Negative)
Menu Function − Chapter 4
Camera
Settings
To set Auto Pair Handsfree On/Off:
“Settings”, then slide out the QWERTY keyboard and press 7. Phone
Info, 1. My Number.
63
2008.11.3 5:5:18 PM
Camera
TO ERASE THE CURRENT PICTURE:
VOICE COMMANDS
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key
[Menu], the Directional Key
to select “Camera”, then slide out the QWERTY keyboard and
press 2. Picture Gallery.
Your phone is equipped with an AVR (Advanced Voice Recognition) feature.
This feature allows you to make calls or use the phone’s functions by simply
using your voice. All you have to do is talk into the phone, and the phone will
recognize your voice and complete tasks by itself.
2. Press the Directional Key
up, down, left or right to select the
picture you want to erase, and then press the Left Soft Key
[Erase]. “Erase Picture file?” will appear on your display.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Camera”, then slide out the QWERTY keyboard and press 2. Picture
Gallery.
up, down, left or right to select your
2. Press the Directional Key
[Options].
desired pictures, then press the Right Soft Key
3. Select one of the following options:
•
•
•
•
•
Send: To send a picture message.
My Movilnet Space: To upload selected picture to picture server.
Set As: Assigns the selected picture to display for specific tasks. (Wallpaper/Picture ID)
Rename: Rename the selected picture.
Move: To move the picture to another save location. This only appears when a memory
card is inserted.
• Erase All: To erase all the pictures in your phone. (Internal Memory/External Memory)
• File Info: Displays information about the selected picture. (File Name/Date/Time/
Resolution/Size)
3. Press the Right Soft Key
appears.
[Yes]. A confirmation message
Shortcut: In idle mode, press and hold the Side AVR Key
Commands menu.
to access the Voice
4. When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command within
approximately eight seconds, AVR mode will turn itself off.
CALL <NAME OR #>
Use the Call command to voice dial a name from your Phonebook list or a phone
number. When dialing a number, pronounce each digit, but do not pause noticeably
between the digits.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. The phone displays the Command menu and prompts you to say
the name of the command you want to use. To complete your task,
simply follow the voice prompts. You can speak the name of the
command after you hear a beep.
2. If calling a contact from your list, say Call <Name>. Your phone will
ask you to confirm the name you said. Say “Yes” if it was repeated
correctly. That phone number will be dialed. If there is more than
one number saved for that Phonebook, you will be asked to confirm
which number to dial.
3. Select one of the following options by pressing the Directional Key
up or down, press the OK Key .
Examples: - Call Tom Smith, - Call 617 555-1212,
- Call Bob Carson’s mobile, - Call Dee Harper at Home.
• Call <Name or #> / • Send Text <Name or #> / • Send Picture <Name or #> /
• Lookup <Name> / • Go To <Menu> / • Check <Item>
Voice Tools
PICTURE GALLERY
In My Pictures you can view all the pictures you have taken, store selected images in
your phone, delete images and access additional picture options.
SEND TEXT <NAME OR #>
Use the Send command to send a text message to a specified name or number.
64
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 64-65
Menu Function − Chapter 4
65
2008.11.3 5:5:19 PM
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
Examples: - “Send Text to Dee Harper’s Mobile“.
- “Send Text Tom Smith“.
- “Send Text to Tom Smith’s Mobile”.
- “Send Text to 617 555-1212”.
SEND PICTURE <NAME OR #>
Use the Send command to send a picture message to a specified name or number.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. Say “Send Picture <Name or #>”.
Examples: - “Send Picture to Dee Harper’s Mobile“.
- “Send Picture Tom Smith“.
- “Send Picture to Tom Smith’s Mobile”.
- “Send Picture to 617 555-1212”.
LOOKUP <NAME>
Use the Lookup command to retrieve and display information for any name stored in
66
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 66-67
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. Say “Lookup <Name>”.
Examples: - Lookup Tom Jones.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. Say “Check” followed immediately by one of the following items:
• Status / • Voicemail / • Messages / • Missed Calls / • Time / • Signal Strength /
• More Options (Network, Battery, My Phone Number, Volume)
3. The View Phonebook page will be displayed for that entry name.
VOICE COMMANDS SETTINGS
GO TO <MENU>
CONFIRMATION
Use the Go To command to open an application on your phone. You can say ”Go To”
by itself and be prompted to say the application name, or you can skip the prompt
by saying ”Go To” followed by the application name.
You can control when the system asks you to confirm a name or number. You can
adapt the system to your voice for optimal recognition accuracy. During adaptation,
the system will prompt you to speak a series of short phrases. If you need to erase
adaptation data and set the system back to the factory default, select Reset Voice.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. Say “Go To” followed immediately by one of the following items:
• Phonebook / • Recent Calls / • Messaging / • Neo Applications / • Settings /
• Neo Navigation
CHECK <ITEM>
The Check command lets you check status information for your phone. You can say
“Check“ or “Check Status“ to see and hear all status information.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “1. Confirmation”.
3. Select “Automatic”, “Always Confirm” or “Never Confirm” by pressing
up or down, then press the Left Soft Key
the Directional Key
[OK].
ADAPTATION
Voice Command is speaker independent, which means that no training or adaptation is required. Some users with heavy accents or unusual voice characteristics may
find difficulty in achieving high accuracy with speaker independent Voice Command,
so the Adapt Voice feature allows users to dramatically improve the recognition
accuracy through adaptation. Users who get acceptable recognition accuracy will
find no additional benefit to performing the Adapt Voice adaptation.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
press the OK Key .
[Settings], scroll to “2. Adaptation”, and
3. Scroll to select “1. Adapt Voice” or “2. Reset Voice” and press the OK
Key .
• Adapt Voice: Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
• Reset Voice: Once you finish the adaptation process, you can reset the adaptation to the
factory default settings.
Voice Tools
Voice Tools
2. Say “Send Text <Name or #>”.
your Phonebook Entry list.
Reset Voice menu option only appears after you finish the Adapt Voice process.
Menu Function − Chapter 4
67
2008.11.3 5:5:20 PM
5. Repeat steps 1- when you are finished with a full session, you will
reach a screen that reads Adaptation Complete.
AUDIO MODES
You can control the level of audio guidance provided by the system. In prompt mode
(the default), the system prompts for required information. In readout mode, the
system prompts for required information and reads out the contents of the screen.
In expert mode, audio guidance is provided by beeps only.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “3. Audio Modes”.
3. Select “Expert Mode”, “Prompt Mode” or “Readout Mode” by pressing
up or down, then press the Left Soft Key
the Directional Key
[OK].
SPEAKERPHONE
You can control how the system uses the speakerphone. Select Always on to have
outgoing audio play through the speakerphone. Select Always off to have outgoing
audio play through the internal speaker. Select Automatic to use the speakerphone
setting of the phone.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “4. Speakerphone”.
3. Select “Automatic”, “Always On” or “Always Off” by pressing the
up or down, then press the Left Soft Key
Directional Key
[OK].
ABOUT
When voice recognition is not confident it has recognized a name or number
correctly, it will show you a list of up to three choices. You can control when choice
lists appear.
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “5. About”.
Voice Tools
Voice Tools
4. Wait for the beep, and then repeat the sentences using a normal
tone of voice.
3. The ”Nuance VSuite 3.2“ version appears.
4. To return to the previous page, press the Right Soft Key
[Back].
VOICE COMMANDS INFO
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Left Soft Key
[Tutorial].
3. Voice Commands menu information appears.
4. To return to the previous page, press the Left Soft Key
[Skip].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
68
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 68-69
Menu Function − Chapter 4
69
2008.11.3 5:5:21 PM
ALARM CLOCK
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press
2. Alarm Clock.
up or down to highlight an Alarm
2. Press the Directional Key
(1, 2 or 3), then press the OK Key [OK].
3. The setting field will be highlighted. Press the Directional Key
down to select alarm options.
ALARM
Press the Directional Key
left or right to select “On” or “Off”.
TIME
Use the keypad to set a time for the alarm and press the Left Soft Key
for “am/pm”.
70
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 70-71
FREQUENCY
left or right to select a setting for the
Press the Directional Key
alarm (Once, Daily, Mon - Fri, Weekends).
RINGER
[Set] to select the alert tone you wish to
Press the Left Soft Key
[Play/Stop] to preview a ringtone.
set. Press the Left Soft Key
Press the OK Key [OK] to make your selection.
4. To save an alarm setting, press the OK Key
[SAVE].
RESET THE ALARM SETTING
CALENDAR
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press
2. Alarm Clock.
The Calendar tool provides easy and convenient access to your schedule.
Simply store your appointments and your phone will alert you to them.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2 or 3), then press the Right Soft Key
[Options].
3. Select “Reset”, then press the Right Soft Key
[Yes].
RESET ALL ALARM SETTINGS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press
2. Alarm Clock.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press
2. Alarm Clock.
up or down to highlight an Alarm
2. Press the Directional Key
(1, 2 or 3), then press the Right Soft Key
[Options].
2. Press the Right Soft Key
3. Select “Turn On/Turn Off” then press the OK Key
[OK].
2. Press the Directional Key
scheduled day.
3. Press the Left Soft Key
TURN ON/OFF THE ALARM SETTING
[Options].
3. Select “Reset All”, then press the Right Soft Key
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Utilities”, then slide out the QWERTY keyboard and press 3. Calendar.
[Yes].
up, down, left or right to highlight the
[New].
4. The Appointment field is highlighted. Enter the name of the event.
down to set the other fields for the
Press the Directional Key
event:
Tools
Tools
The Alarm Clock tool allows you to set up to three alarms. When you set an
alarm, the current time is displayed at the top of the screen. When the alarm
goes off, Alarm 1 (or 2 or 3, as applicable) will be displayed on the LCD screen
and the alarm will sound.
SCHEDULE
Use the keypad to enter an appointment in your schedule.
START TIME
Use the keypad to set a start time and press the Left Soft Key
for “am/pm”.
Menu Function − Chapter 4
71
2008.11.3 5:5:22 PM
END TIME
Use the keypad to set an end time and press the Left Soft Key
for “am/pm”.
REMINDER
Press the Directional Key
interval option.
left or right to select an alert time
Tools
START DATE
Use the keypad to change or enter the start date.
RECURRENCE
Press the Directional Key
left or right to set the recurrence of
the event (Daily, Weekly, Monthly, Yearly). For each recurrence setting, press the Directional Key
down to set the “By Count” field.
For “Daily”, set the number of days. For “Weekly”, you can press the
Directional Key
left or right to select “By Count” or “By Day”.
Then press the Directional Key
down again to make the setting - for “By Count”, enter the number of weeks. For “By Day”, press
the Directional Key
left or right to select a day of the week.
For “Monthly”, set “By Count” the number of months, or press the
72
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 72-73
right to set “By Day/Month”. For “Yearly”, set “By
END DATE
Use the keypad to change or enter the end date.
TIME ZONES
If the Time Zone needs to be adjusted, press the Left Soft Key
up or down to select a new time
[Set]. Press the Directional Key
zone then press the OK Key [OK].
• Off / • EST / • EDT / • CST / • CDT / • MST / • MDT / • PST / • PDT / • AKST /
• AKDT / • HAST / • HADT / • GMT/UTC
ALERT
[Set] to select a new ringtone. Press the
Press the Left Soft Key
Directional Key
up or down to highlight a ringtone then press
the OK Key [OK]. Press the Left Soft Key
[Play/Stop] to
preview a ringtone.
VIBRATE
Press the Directional Key
VIEW PLAN LIST
ERASE ALL
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 3. Calendar.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 3. Calendar.
2. Press the Directional Key
up, down, left or right to choose the
event then press the OK Key [VIEW].
2. Press the Directional Key
up, down, left or right to choose the
event then press the OK Key [VIEW].
ERASE SAVED EVENT
3. Press the Right Soft Key
[Options], “6. Erase Passed”, then press
the Right Soft Key
[Yes].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 3. Calendar.
up, down, left or right to choose the
2. Press the Directional Key
event then press the OK Key [VIEW].
3. Press the Left Soft Key
[Yes].
Tools
• 0 Minute / • 5 Minutes / • 10 Minutes / • 15 Minutes
Directional Key
Day/Month”.
[Erase], then press the Right Soft Key
left or right to set “On” or “Off”.
5. Press the OK Key [SAVE] to save it. The date of the event will be
marked on your calendar.
Menu Function − Chapter 4
73
2008.11.3 5:5:23 PM
WORLD CLOCK
To display the time and date in pre-programmed cities:
2. Press the Left Soft Key
[Cities] to access the CITIES LIST.
up or down to select the city, then
Press the Directional Key
up,
press the OK Key [OK]. Or, press the Directional Key
down, left, or right to select your city using the world map.
3. The world map appears with the city, its date, and time.
DST DAYLIGHT SAVING TIME SETTING
1. Press the OK Key [OK] to unlock the keypad, then press the Right
Soft Key
[DST] to set the DST options. Press the Directional Key
left or right to select City and then press the Directional Key
down.
4. Under “Start Time”, use the keypad to set a start time and press the
Left Soft Key
for “am/pm” and then press the Directional Key
down.
5. Under “End Date”, use the keypad to change or enter the end date
and then press the Directional Key
down.
6. Under “End Time”, use the keypad to set a end time and press the Left
for “am/pm”.
Soft Key
7. To save a DST setting, press the OK Key
[SAVE].
NOTEPAD
ERASE SAVED MEMO
Your phone includes an internal notepad that can be used to compose and
store reminders and notes. To create a note:
To erase a saved memo:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Utilities”, then slide out the QWERTY keyboard and press 5. Notepad.
2. Press the Left Soft Key
done, press the OK Key
[New] to write a new note. When you are
[SAVE].
2. Press the Right Soft Key
[Options], then select “Erase.”
3. Press the Right Soft Key
[Yes].
ERASE ALL SAVED MEMOS
VIEW SAVED MEMO
To erase all saved memos:
To view a saved memo:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 5. Notepad.
2. Press the OK Key
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 5. Notepad.
[VIEW] to view a selected Note.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 5. Notepad.
2. Press the Right Soft Key
[Options], then select “Erase All.”
3. Press the Right Soft Key
[Yes].
Tools
Tools
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press
4. World Clock.
3. Under “Start Date”, use the keypad to change or enter the start date
and then press the Directional Key
down.
left or right to turn DST (Daylight
2. Press the Directional Key
down.
Savings Time) “On” or “Off”. Press the Directional Key
74
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 74-75
Menu Function − Chapter 4
75
2008.11.3 5:5:25 PM
STOP WATCH
4. To measure up to eight time periods, repeat the above steps.
Simultaneously times up to eight different events. To operate the stop watch:
5. To stop the stop watch, press the OK Key
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press
7. Stop Watch.
6. To review the results, press the Left Soft Key
[View].
7. To return to the stop watch, press the OK Key
[OK].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
[Menu], the Directional Key
to select
press the Left Soft Key
“Utilities”, then slide out the QWERTY keyboard and press
6. Calculator.
2. Follow the instructions below to calculate 8×6÷4-2.5=9.5
•
•
•
•
•
•
Input 8 and then press the Directional Key right.
Input 6 and then press the Directional Key left.
Input 4 and then press the Directional Key down.
Input 2 and then press the to input (.).
Press 5.
Then press the OK Key and you will see the answer (9.5).
3. To reset, press the Left Soft Key
[Clear].
• Directional Key right : X, Directional Key down : -,
Directional Key left : ÷, Directional Key up : +, * Key : .,
Left Soft Key
: Clear, OK Key : =.
• To change the displayed number from positive (+) to negative (-) and vice versa,
press # Key .
• Press the Right Soft Key
[Operator] to use parenthesis “1. (”, “2. )” and
“3. Exponent”.
76
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 76-77
[Reset].
MASS STORAGE
TO MEASURE A TIME PERIOD
1. To start the stop watch, press the OK Key
2. To pause it, press the OK Key
8. To reset it, press the Right Soft Key
[STOP].
[START].
[STOP].
3. To resume it, press the OK Key
4. To reset it, press the Right Soft Key
[START].
[Reset].
TO TIME UP TO EIGHT EVENTS AT ONCE:
1. To start the stop watch, press the OK Key
[START].
Before using mass storage capabilities, you need to prepare your device’s
data services to synchronize with your desktop or laptop computer. Once the
phone is connected to the PC, you can transfer your data in the microSD card
quickly and easily.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Utilities”, then slide out the QWERTY keyboard and press 8. Mass
Storage.
2. To stop a time period and continue measuring another one,
press the Left Soft Key
[Lap].
2. Connect your phone to the PC by using the included USB cable. (Wait
until the connection is completed.)
3. To stop the second and continue measuring a third one, press the Left
[Lap].
Soft Key
3. Once plugged into the USB port, the Mass Storage Device is detected
by the host computer.
4. When you have finished, click on the USB device icon on your
computer’s task bar and follow the instructions provided to safely
unplug the USB cable. (The process may vary depending on the PC.)
• No driver installation is required for Windows 2000/ME/ XP users. If you use Windows
98/98SE, you have to download and install the USB Mass Storage Driver.
• To avoid loss of data, DO NOT remove the USB cable, the microSD card or the battery
while files are being accessed or transferred.
• Make sure to follow the proper procedure when you disconnect the USB cable. Your
computer may no longer detect your handset when you disconnect it several times
improperly.
• DO NOT change or edit the folder/file name in the microSD card via the computer or
attempt to transfer large amounts of data from the computer to the microSD card. It
may result in microSD card failure.
• DO NOT turn off, put into idle mode or restart your computer while using the Mass
Storage Device. It will result in loss or damage of data.
• While you are connected to the computer, your phone’s screen will display “Phone Off.”
You cannot make or receive calls.
• When you connect a Mass Storage device to a peripheral device, your device may
not work properly.
Menu Function − Chapter 4
Tools
Tools
CALCULATOR
The Calculator allows you to perform simple mathematical calculations.
To access the calculator:
77
2008.11.3 5:5:26 PM
MESSAGING MENU
Note
This chapter addresses Voicemail, Text, Picture Messaging
functions including:
When a new message arrives
New message
Voicemail
Inbox
Sent
Drafts
Settings
Erase
78
MESSAGING MENU
CHAPTER 5
Chapter 4 − Menu Function
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 78-79
2008.11.3 5:5:28 PM
2. Recent Calls: Search for a phone number which is stored in the recent calls list.
3. Message Groups: Search the message groups stored in the Phonebook list.
4. To List Entries: Save the number or email you’ve entered to the Phonebook list, when
you enter the number.
WHEN A NEW MESSAGE ARRIVES
4. Under “Text”, input a new Text message. When completed, press the
OK Key [SEND].
2. To display the message, select “View”
and then press the OK Key [OK].
NEW MESSAGE
Shortcut: In idle mode, press the Directional Key
down to access Messaging menu.
TEXT MESSAGE
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press 1. New
Message.
2. Press “1. Text Message”.
3. Under “To”, input the phone number and then press the OK Key
[OK].
• By pressing the Right Soft Key
[Add], you can choose from the following:
1. From List Entries: Search for a phone number which is stored in the Phonebook list.
80
Chapter 5 − Messaging Menu
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 80-81
• By pressing the Right Soft Key
[Options], you can choose from the following:
1. Read Message: To readout already written sentences in Text message.
2. Save As Draft: To save the Text message.
3. Add Quick Text: Inserts already written sentences in Text message.
4. Priority Level: Select “High” or “Normal” by pressing the Directional Key up or
down.
5. Delivery ACK: Select “On” or “Off” by pressing the Directional Key up or down.
6. Cancel Message: To cancel message.
If one of the fields is inserted in the Text message field, the message is saved in the
draft box.
PICTURE MESSAGE
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press 1. New
Message.
2. Press “2. Picture Message”.
• By pressing the Right Soft Key
[Add], you can choose from the following:
1. From List Entries: Search for a phone number which is stored in the Phonebook list.
2. Recent Calls: Search for a phone number which is stored in the recent calls list.
3. Message Groups: Search the groups stored in the Phonebook list.
4. To List Entries: Save the number or email you’ve entered to the Phonebook list, when
you enter the number.
5. My Movilnet Space: To send Picture message by using Movilnet online Address.
4. Under “Text”, input a New Picture Message and then press the
down.
Directional Key
5. Under “Picture”, you can only insert/remove one picture.
[Add] to select the picture you would like
Press the Left Soft Key
to send then press the OK Key [OK].
6. Under “Sound”, you can only insert/remove one sound. Press the Left
[Add] to select the sound you would like to send then
Soft Key
press the OK Key [OK].
7. Under “Subject”, input a subject.
8. Press the Right Soft Key
[Options] to access the following:
• Preview: To preview a written Picture Message.
• Read Message: To readout already written sentences in Text message.
•
•
•
•
•
•
•
•
Save As Draft: To save the Picture Message.
Add Quick Text: Inserts already written sentences in Picture Message.
Add Slide: To add a another message.
Priority Level: Select “High” or “Normal” by pressing the Directional Key
Remove Picture: To remove inserted picture in Picture field.
Remove Slide: To remove inserted Slide Message.
Remove Sound: To remove inserted sound in Sound field.
Cancel Message: To cancel message.
9. To send the Picture message, press the OK Key
up or down.
[SEND].
If one of the fields is inserted in Picture Message field, the message is saved in the
draft box.
VOICEMAIL
New voicemail alerts are sent via an SMS text message. These messages
indicate how many new and urgent voicemails are in your voicemail box.
Open the text message to view the number of new voice messages in your
voicemail. If a caller leaves a callback number, this number will also be sent via
an SMS text message. Displays the number of voice mails and accesses them
by pressing and holding the SEND Key .
Messaging
Messaging
1. The following display appears when a new
message arrives.
3. Under “To”, input the phone number and then press the OK Key
[OK].
TO ACCESS YOUR VOICE MAILBOX
1. To dial voice mail directly, slide out the QWERTY keyboard and
then press * Key , 9 Key and then the SEND Key . Or, from
Messaging Menu − Chapter 5
81
2008.11.3 5:5:29 PM
Messaging
2. Follow the prompts to enter your lock code and retrieve your
messages.
If you hear your own system greeting when you dial *VM (
interrupt it and follow the prompts to enter your lock code.
,
), press
VOICE MAIL SETUP
to proceed.
You will be charged airtime for using your wireless phone to set-up or retrieve
voice mail. Toll and/or long distance charges may also apply.
3. Follow the prompts to personalize your lock code, greeting and
mailbox options.
VOICE MAIL SETUP
1. Press * Key
82
, 9 Key
and then the SEND Key . (To access your
Chapter 5 − Messaging Menu
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 82-83
2. If you hear a greeting, press
to proceed.
You will be charged airtime for using your wireless phone to set-up or retrieve
voice mail. Toll and/or long distance charges may also apply.
3. Enter your lock code and press
to
1. Press * Key , 9 Key and then the SEND Key . (If calling from
a touch-tone phone, enter your wireless number.)
2. If you hear a greeting, press
voice mail from outside the network or from a touch-tone phone,
enter your wireless number.)
.
INBOX
The Inbox manages received Text, Picture, Voice, Web Alert messages. To
access:
3. Press the Right Soft Key
•
•
•
•
•
•
•
•
•
•
•
•
[Options] to access the following:
Play Again: To play a received Picture message.
Reply: Type your reply.
Forward: Select to forward the Text or Picture message.
Save Picture (MMS Picture): Select to save a picture to the “Picture Box” folder.
Save As Ringtone (MMS Sound): Select to save a sound to the “Sound Box” folder.
Save Sound (MMS Sound): Select to save a sound to the “Sound Box” folder
Read Message: To readout sentences in received message.
Save Quick Text: Select to save received text msg to “Quick Text”.
To List Entries: Select to save number to Phonebook.
Lock/Unlock: Select to lock or unlock the Text or Picture message.
Erase All: To erase all inbox message.
Message Info: Select to show received Text/Picture message information.
MESSAGE ICON REFERENCE
Sent
Delivered
Priority
Sent Failed
3. With the message open, press the Right Soft Key
access the following:
•
•
•
•
•
•
•
•
•
Incomplete
Delivery
[Options] to
Play Again: Select to play sent MMS message.
Forward: Select to forward the Text or Picture message.
Resend: To resend a sent Text or Picture message.
Lock/Unlock: Select to lock or unlock the Text or Picture message.
Read Message: To readout sentences in sent message.
Save Quick Text: Select to save sent text msg to “Quick Text”.
To List Entries: Select to save number to Phonebook.
Erase All: To erase all sent message.
Message Info: Select to show sent Text/Picture message information.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press 3. Inbox.
Manages Text, Picture messages already sent or waiting to be sent.
2. Select a message and then press the OK Key [OK].
The message is displayed. To delete a message, press the Left Soft
Key
[Erase], then press the Right Soft Key
[Yes].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press 4. Sent.
Draft Folder contains any draft messages or saved messages. If message
composition is interrupted by a voice call or other interrupting event, the
message of the current composition is automatically saved in the drafts folder.
2. Select a message and then press the OK Key [OK].
The message is displayed. To delete a message, press the Left Soft
Key
[Erase], then press the Right Soft Key
[Yes].
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press 5. Drafts.
MESSAGE ICON REFERENCE
Read
Unread
Priority
MMS Unread
MMS Read
SENT
DRAFTS
Messaging Menu − Chapter 5
Messaging
standby mode, press the OK Key [OK] to unlock the keypad, press
the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press
2. Voicemail then the SEND Key .
83
2008.11.3 5:5:30 PM
Messaging
[EDIT].
3. To delete a message, press the Left Soft Key
the Right Soft Key
[Yes].
[Erase], then press
MESSAGE ICON REFERENCE
MMS Drafts
4. Press the Right Soft Key
•
•
•
•
SMS Drafts
[Options] to access the following:
Send: Select to send a selected message.
Lock/Unlock: Select to lock or unlock the Text or Picture message.
To List Entries: Select to save number to Phonebook.
Erase All: To erase all drafts messages.
SETTINGS
To configure received message settings:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to
select “Messaging”, then slide out the QWERTY keyboard and press
6. Settings.
up or down to highlight one of the
2. Press the Directional Key
settings below, then press the OK Key [OK] to select it:
84
Chapter 5 − Messaging Menu
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 84-85
ENTRY MODE
AUTO RECEIVE
Sets an Entry Mode as a default.
1. Select “On” or “Off” by pressing the Directional Key
then press the OK Key [OK].
1. Select “Abc”, “ABC” or “123” by pressing the Directional Key
down then press the OK Key [OK].
up or
• On: Picture message downloaded automatically.
• Off: Picture message must be retrieved from the inbox or at new Picture Message prompt.
AUTO SAVE
1. Select “On”, “Off” or “Prompt” by pressing the Directional Key
or down then press the OK Key [OK].
up
• On: All sent messages saved in the Sent box.
• Off: All sent messages not saved in the Sent box.
• Prompt: “Yes”, “No” dialogue box displayed after sent message.
QUICK TEXT
To edit the Quick Text you have saved:
1. Select a message from the list then press the OK Key
AUTO ERASE
3. To erase a saved Quick Text, press the Left Soft Key
press the Right Soft Key
[Yes].
up or down
• On: Oldest read message erased from inbox automatically when Inbox is full.
• Off: Oldest read message not erased from inbox automatically when Inbox is full.
[Erase], then
CALLBACK #
Edits a default callback number so that the recipient can callback or reply.
1. Select “On” or “Off” by pressing the Directional Key
then press the OK Key [OK].
Create a signature that can be automatically inserted at the end of all Text and
Picture messages.
1. To deactivate Signature function, select “None”.
2. To input a “Signature”, select “Custom”. Enter your signature in the
text box then press the OK Key [OK].
ERASE
[EDIT].
[New].
2. To add a new Quick Text, press the Right Soft Key
Enter the new text then press the OK Key [SAVE].
Automatically erases inbox messages when new messages arrive.
1. Select “On” or “Off” by pressing the Directional Key
then press the OK Key [OK].
SIGNATURE
up or down
up or down
To erase all messages stored in your Inbox, Drafts or Sent folders:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key
to select
“Messaging”, then slide out the QWERTY keyboard and press 7. Erase.
•
•
•
•
Press “1. Erase Inbox” to erase all messages or only read message stored in the Inbox.
Press “2. Erase Drafts” to erase all messages stored in the Drafts folder.
Press “3. Erase Sent” to erase all messages stored in Sent Folder.
Press “4. Erase All” to erase all messages stored in the Inbox, Sent, and Drafts folders.
Locked messages cannot be erased.
2. Press the Right Soft Key
Messaging
2. Select a message and then press the OK Key
The message is displayed.
[Yes]. A confirmation message appears.
2. If “On” is selected, input a new callback number then press the OK
Key [OK].
Messaging Menu − Chapter 5
85
2008.11.3 5:5:32 PM
SAFETY AND WARRANTY
Note
This chapter addresses the safety guidelines and precautions to follow when operating
your phone. Before operating your phone, please be aware of all the safety details.
This chapter contains the terms and conditions of services and the
warranty for your phone. Please review them thoroughly.
Safety information for wireless handheld phones
Safety information for FCC RF exposure
SAR information
FCC hearing-aid compatibility (HAC) regulations for wireless devices
FDA consumer update
Avoid potential hearing loss.
FCC compliance information
12 month limited warranty
86
SAFETY AND WARRANTY
CHAPTER 6
Chapter 5 − Messaging Menu
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 86-87
2008.11.3 5:5:33 PM
SAFETY INFORMATION FOR WIRELESS HANDHELD
PHONES
READ THIS INFORMATION BEFORE USING YOUR HANDHELD
PORTABLE CELLULAR TELEPHONE
Your wireless handheld portable telephone is a low power radio transmitter and
receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.
In August 1996, the Federal Communications Commissions (FCC) adopted RF
exposure guidelines with safety levels for handheld wireless phones. Those
guidelines are consistent with the safety standards previously set by both U.S. and
international standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986) *
ICNIRP (1996) *
Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians
from universities, government health agencies, and industry reviewed the available
body of research to develop the ANSI Standard (C951).
The design of your phone complies with the FCC guidelines (and those standards).
88
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 88-89
ANTENNA SAFETY
Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could impair call quality, damage the phone, or result
in violation of FCC regulations. Please contact your local dealer for replacement
antenna.
Do not use the phone with a damaged antenna. If a damaged antenna comes into
contact with the skin, a minor burn may result. Please contact your local dealer for
replacement antenna.
DRIVING SAFETY
Talking on the phone while driving is extremely dangerous and is illegal in some
states. Remember, safety comes first. Check the laws and regulations on the use of
phones in the areas where you drive. Always obey them. Also, if using your phone
while driving, please:
• Give full attention to driving. Driving safely is your first responsibility.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call, if driving conditions
so require.
If you must use the phone while driving, please use one-touch, speed dialing, and
auto answer modes.
An airbag inflates with great force. DO NOT place objects, including both installed
or portable wireless equipment, in the area over the airbag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
WARNING: Failure to follow these instructions may lead to serious personal injury and
possible property damage.
ELECTRONIC DEVICES
Your wireless handheld portable telephone is a low power radio transmitter and
receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.
• ALWAYS keep the phone more than six inches from your pacemaker when the
phone is turned on.
• Do not carry the phone in a breast pocket.
• Use the ear opposite the pacemaker to minimize the potential for interference.
• If you have any reason to suspect that interference is taking place, turn your
phone OFF immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider (or call the
customer service line to discuss alternatives).
OTHER MEDICAL DEVICES
Most modern electronic equipment is shielded from RF energy. However, certain
electronic equipment may not be shielded against the RF signals from your wireless
phone. Therefore, use of your phone must be restricted in certain situations.
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
PACEMAKERS
Turn your phone OFF in healthcare facilities when any regulations posted in these
areas instruct you to do so. Hospitals or healthcare facilities may be using
equipment that could be sensitive to external RF energy.
The Health Industry Manufacturers Association recommends that a minimum
separation of six (6”) inches be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations
of Wireless Technology Research. Persons with pacemakers:
Safety
Safety
EXPOSURE TO RADIO FREQUENCY SIGNALS
1* : American National Standards Institute.
2* : National Council on Radiation protection and measurements.
3* : International Commission on Nonionizing Radiation Protection.
VEHICLES
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding
Safety and Warranty − Chapter 6
89
2008.11.3 5:5:34 PM
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
POSTED FACILITIES
Areas with a potentially explosive atmosphere are often, but not always, clearly
marked. They include fueling areas such as gas stations; below deck on boats; fuel or
chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such
as propane or butane); areas where the air contains chemicals or particles, such as
grain, dust, or metal powders; and any other area where you would normally be
advised to turn off your vehicle’s engine.
Turn your phone OFF where posted notices so require.
Safety
OTHER SAFETY GUIDELINES
AIRCRAFT
FCC regulations prohibit using your phone while in the air. Turn your phone OFF
before boarding an aircraft. Always request and obtain prior consent and approval
of an authorized airline representative before using your phone aboard an aircraft.
Always follow the instructions of the airline representative whenever using your
phone aboard an aircraft, to prevent any possible interference with airborne
electronic equipment.
BLASTING AREAS
To avoid interfering with blasting operations, turn your phone OFF when in a
“blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and
instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a potentially explosive atmosphere and
90
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 90-91
PRECAUTIONS
Your Handheld Portable Telephone is a high quality piece of equipment. Before
operating, read all instructions and cautionary markings on (1) AC/DC Travel Adaptor
(2) Battery and (3) Product Using Battery.
Failure to follow the directions below could result in serious bodily injury and/or
property damage due to battery liquid leakage, fire or rupture.
• DO NOT use this equipment in an extreme environment where high temperature
or high humidity exists.
• DO NOT abuse the equipment. Avoid striking, shaking or shocking. When not
using, lay down the unit to avoid possible damage due to instability.
• DO NOT expose this equipment to rain or spilled beverages.
• DO NOT use unauthorized accessories.
• DO NOT disassemble the phone or its accessories. If service or repair is required,
return unit to an authorized PCD Personal Communications cellular service center.
If unit is disassembled, the risk of electric shock or fire may result.
• DO NOT short-circuit the battery terminals with metal items etc.
SAFETY INFORMATION FOR FCC RF EXPOSURE
WARNING! READ THIS INFORMATION BEFORE USING
CAUTIONS
In August 1996 the Federal Communications Commission (FCC) of the United States
with its action in Report and Order FCC 96-326 adopted an updated safety standard
for human exposure to radio frequency electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone
complies with the FCC guidelines and these international standards.
BODYWORN OPERATION
This device was tested for typical body-worn operations with the back of the
phone kept 1.5 cm. from the body. To maintain compliance requirements, use only
belt-clips, holsters or similar accessories that maintain a 1.5 cm separation distance
between the user’s Body and the back of the phone, including the antenna.
The use of belt-clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov.
SAR INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy
set by the Federal Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on standards that were developed
by independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6
W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at
the highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach the
Safety and Warranty − Chapter 6
Safety
your vehicle. You should also consult the manufacturer of any equipment that has
been added to your vehicle.
91
2008.11.3 5:5:35 PM
Before a phone model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for use at the ear
is 1.19 W/Kg and when worn on the body, as described in this user guide, is
0.694 W/Kg. (Body-worn measurements differ among phone models, depending
upon available accessories and FCC requirements). While there may be differences
between the SAR levels of various phones and at various positions, they all meet the
government requirement for safe exposure.
The SAR testing for Body-worn operation was performed with a belt clip that
provided a 22mm separation. The User’s Manual indicates that any holsters/clips
used with this device should contain no metallic components.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
SAR information on this model phone is on file with the FCC and can be found under
the Display Grant section of http://www.fcc.gov/oet/ea after searching on PP4ELVIS.
Additional information on Specific Absorption Rates (SAR) can be found on the
Cellular Telecommunications Industry Association (CTIA) web-site
at http://www.wow-com.com.
92
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 92-93
* In the United States and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard
incorporates a sub-stantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
FCC HEARINGAID COMPATIBILITY HAC
REGULATIONS FOR WIRELESS DEVICES
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and
Order in WT Docket 01-309 modified the exception of wireless phones under the
Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones
be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable
access to telecommunications services for persons with hearing disabilities.
While some wireless phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for wireless phones,
to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating
on their box or a label located on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to interfer-
ence, you may not be able to use a rated phone successfully. Trying out the phone
with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices
than phones that are not labeled. M4 is the better/higher of
the two ratings.
Hearing devices may also be rated. Your hearing device manufacturer or hearing
health professional may help you find this rating. Higher ratings mean that the
hearing device is relatively immune to interference noise.
For information about hearing aids and digital wireless phone
• Fcc Hearing Aid Compatibility and Volume Control
http://www.fcc.gov/cgb/dro/hearing.html
• Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm
• Self Help for Hard of Hearing People Inc. [SHHH]
www.hearingloss.org/hat/TipsWirelessPhones.htm
• The Hearing Aid Compatibility FCC Order
http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-168A1.pdf
Safety
Safety
network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
The hearing aid and wireless phone rating values are then added together. A sum of
5 is considered acceptable for normal use. A sum of 6 is considered for best use.
In the above example, if a hearing aid meets the M2 level rating and the wireless
phone meets the M3 level rating, the sum of the two values equal M5. This should
provide the hearing aid user with “normal usage” while using their hearing aid with
the particular wireless phone. “Normal usage” in this context is defined as a signal
quality that is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The T mark is intended
to be synonymous with the UT mark. The M and T marks are recommended by the
Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks
are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement
procedure are described in the American National Standards Institute (ANSI) C63.19
standard.
Safety and Warranty − Chapter 6
93
2008.11.3 5:5:35 PM
FDA CONSUMER UPDATE
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF)
in the microwave range while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional
research. In some cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
2. What is FDA’s role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to
94
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 94-95
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists. Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone industry to take a number of
steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some inter-agency working group
activities, as well. FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold in the United
States must comply with FCC safety guidelines that limit RF exposure. FCC relies on
FDA and other health agencies for safety questions about wireless phones. FCC also
regulates the base stations that the wireless phone networks rely upon. While these
base stations operate at higher power than do the wireless phones themselves, the
RF exposures that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base stations are thus
not the subject of the safety questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term “wireless phone” refers here to hand-held wireless phones with built-in
antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless
phones can expose the user to measurable radiofrequency energy (RF) because of
the short distance between the phone and the user’s head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the
phone is located at greater distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly with increasing distance
from the source. The so-called “cordless phones,” which have a base unit connected
to the telephone wiring in a house, typically operate at far lower power levels, and
thus produce RF exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating
the effects of radiofrequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals.
However, many of the studies that showed increased tumor development used
animals that had been genetically engineered or treated with cancer-causing
chemicals so as to be predisposed to develop cancer in the absence of RF exposure.
Other studies exposed the animals to RF for up to 22 hours per day. These conditions
are not similar to the conditions under which people use wireless phones, so we
don’t know with certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use
of wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neu-roma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
Safety
Safety
U.S. FOOD AND DRUG ADMINISTRATION  CENTER
FOR DEVICES AND RADIOLOGICAL HEALTH
CONSUMER UPDATE ON WIRELESS PHONES
5. What research is needed to decide whether RF exposure from wireless
phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
Safety and Warranty − Chapter 6
95
2008.11.3 5:5:36 PM
Safety
6. What is FDA doing to find out more about the possible health effects of
wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted
to address important questions about the effects of exposure to radiofrequency
energy (RF). FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the development of a detailed agenda
of research needs that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of public information
documents on EMF issues. FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and Development Agreement
96
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 96-97
(CRADA) to do research on wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through contracts to independent
investigators. The initial research will include both laboratory studies and studies of
wireless phone users. The CRADA will also include a broad assessment of additional
research needs in the context of the latest research developments around the world.
7. How can I find out how much radiofrequency energy exposure I can get
by using my wireless phone?
All phones sold in the United States must comply with Federal Communications
Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC
established these guidelines in consultation with FDA and the other federal health
and safety agencies. The FCC limit for RF exposure from wireless telephones is set
at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC
limit is consistent with the safety standards developed by the Institute of Electrical
and Electronic Engineering (IEEE) and the National Council on Radiation Protection
and Measurement. The exposure limit takes into consideration the body’s ability
to remove heat from the tissues that absorb energy from the wireless phone and
is set well below levels known to have effects. Manufacturers of wireless phones
must report the RF exposure level for each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC
identification number on your phone so you can find your phone’s RF exposure level
in the online listing.
8. What has FDA done to measure the radiofrequency energy coming from
wireless phones ?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical
standard for measuring the radiofrequency energy (RF) exposure from wireless
phones and other wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, “Recommended Practice for Determining
the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques,” sets forth the first consistent
test methodology for measuring the rate at which RF is deposited in the heads of
wireless phone users. The test method uses a tissue-simulating model of the human
head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is
the measurement of the amount of energy absorbed in tissue, either by the whole
body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine whether a wireless phone complies
with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency energy
from my wireless phone?
If there is a risk from these products—and at this point we do not know that there
is—it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone away from your
body or use a wireless phone connected to a remote antenna. Again, the scientific
data do not demonstrate that wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radiofrequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government
in the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Safety and Warranty − Chapter 6
Safety
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but 10 or more years’ follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors
develop - if they do -may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during
day-to-day use of wireless phones. Many factors affect this measurement, such as
the angle at which the phone is held, or which model of phone is used.
97
2008.11.3 5:5:36 PM
Safety
• Federal Communications Commission (FCC) RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
• International Commission on Non-Ionizing Radiation Protection
(http://www.icnirp.de)
• World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
• National Radiological Protection Board (UK) (http://www.hpa.org.uk/radiation/)
12. Where can I find additional information?
For additional information, please refer to the following resources:
The amount of sound produced by a portable audio device varies depending on
the nature of the sound, the device, the device settings and the headphones. You
should follow some commonsense recommendations when using any portable
audio device:
• FDA web page on wireless phones
(http://www.fda.gov/cellphones)
98
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 98-99
AVOID POTENTIAL HEARING LOSS.
Prolonged exposure to loud sounds (including music) is the most common cause
of preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced
hearing loss. This includes the use of headphones (including headsets, earbuds and
Bluetooth® or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing. Individual susceptibility to noise-induced hearing loss
and other potential hearing problems varies.
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, use noise-cancelling headphones
to block out background environmental noise.
• Limit the amount of time you listen. As the volume increases, less time is required
before your hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing
in your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
YOU CAN OBTAIN ADDITIONAL INFORMATION ON THIS SUBJECT FROM
THE FOLLOWING SOURCES:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: 800-AAA-2336, 703-790-8466
Email: info@audiology.org
Internet: www.audiology.org
Safety
11. What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless
phone EMI. FDA has tested hearing aids for interference from handheld wireless
phones and helped develop a voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless phones so that that no
interference occurs when a person uses a “compatible” phone and a “compatible”
hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA
continues to monitor the use of wireless phones for possible interactions with other
medical devices. Should harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the problem.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD USA 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nidcd.nih.gov
Internet: http://www.nidcd.nih.gov/health/hearing
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-CDC-INFO (1-800-232-4636)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Safety and Warranty − Chapter 6
99
2008.11.3 5:5:37 PM
FCC COMPLIANCE INFORMATION
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
Safety
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and,
if Not installed and used in accordance with the instructions, may cause harmful
Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet of a circuit different from that to which the
receiver is connected.
100
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 100-101
CAUTION: Changes or modification not expressly approved by the party responsible for
Compliance could void the user’s authority to operate the equipment. Connecting of
peripherals requires the use of grounded shielded signal cables.
12 MONTH LIMITED WARRANTY
PCD Personal Communications (the Company) warrants to the original retail purchaser of this PCD Personal Communications handheld portable cellular telephone,
that should this product or any part thereof during normal consumer usage and
conditions, be proven defective in material or workmanship that results in product
failure within the first twelve (12) month period from the date of purchase, such
defect(s) will be repaired or replaced (with new or rebuilt parts) at the Company’s
option, without charge for parts or labor directly related to the defect(s).
The antenna, keypad, display, rechargeable battery and battery charger, if included,
are similarly warranted for twelve (12) months from date of purchase.
This Warranty extends only to consumers who purchase the product in the United
States or Canada and it is not transferable or assignable.
This Warranty does not apply to:
(a) Product subjected to abnormal use or conditions, accident, mishandling, neglect,
unauthorized alteration, misuse, improper installation or repair or improper
storage;
(b) Product whose mechanical serial number or electronic serial number has been
removed, altered or defaced.
(c) Damage from exposure to moisture, humidity, excessive temperatures or extreme
environmental conditions;
(d) Damage resulting from connection to, or use of any accessory or other product
not approved or authorized by the Company;
(e) Defects in appearance, cosmetic, decorative or structural items such as framing
and non-operative parts;
(f) Product damaged from external causes such as fire, flooding, dirt,sand, weather
conditions, battery leakage, blown fuse, theft or improper usage of any electrical source.
The Company disclaims liability for removal or reinstallation of the product, for
geographic coverage, for inadequate signal reception by the antenna or for
communications range or operation of the cellular system as a whole.
When sending your wireless device to PCD Personal Communications for repair or
service, please note that any personal data or software stored on the device may be
inadvertently erased or altered. Therefore, we strongly recommend you make a back
up copy of all data and software contained on your device before submitting it for
repair or service. This includes all contact lists, downloads (i.e. third-party software
applications, ringtones, games and graphics) and any other data added to your
device. In addition, if your wireless device utilizes a SIM or Multimedia card, please
remove the card before submitting the device and store for later use when your
device is returned, PCD Personal Communications is not responsible for and does not
guarantee restoration of any third-party software, personal information or memory
data contained in, stored on, or integrated with any wireless device, whether under
warranty or not, returned to PCD Personal Communications for repair or service.
Warranty
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
• Consult the dealer or an experienced radio/TV technician for assistance.
To obtain repairs or replacement within the terms of this Warranty, the product
should be delivered with proof of Warranty coverage (e.g. dated bill of sale),
the consumer’s return address, daytime phone number and/or fax number and
Safety and Warranty − Chapter 6
101
2008.11.3 5:5:37 PM
Warranty
complete description of the problem, transportation prepaid, to the Company at the
address shown below or to the place of purchase for repair or replacement processing. In addition, for reference to an authorized Warranty station in your area, you
may telephone in the United States (800) 229-1235, and in Canada (800) 465-9672
(in Ontario call 416-695-3060).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO
THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LAIBILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE
PRODUCT.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OF
ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR AN SPECIAL
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. THE COMPANY SHALL NOT BE
LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF
USE DURING THE TIME THE PRODUCT IS BEING REPAIRED OR REPLACED.
above limitation or exclusions may not apply to you. This Warranty gives you specific
legal rights, and you may also have other rights, which vary from state to state or
province to province.
IN USA:
PCD Personal Communications
555 Wireless Blvd.
Hauppauge, NY 11788
(800) 229-1235
IN CANADA:
PCD Canada Company
5535 Eglinton Avenue West
Suite# 234
Toronto, ON M9C 5K5
(800) 465-9672
No person or representative is authorized to assume for the Company any liability
other than expressed herein in connection with the sale of this product.
Some states or provinces do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damage so the
102
Chapter 6 − Safety and Warranty
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 102
2008.11.3 5:5:37 PM