OWNER'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain
this Owner's Manual in a safe place for future reference.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
I)
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association's Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
En
B
LISTENING
Fol:ALlletllne==
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers)
IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC,
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit "OFF"
and "ON", please try to eliminate the problem by using
one of the following measures:
to use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class "B" digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/so
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300 ohm
ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Electronics Corp., USA 6660 Orangethorpe
Ave., Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
ii
En
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
iii
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry,
clean place - away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold. For proper
ventilation, allow the following minimum clearances
around this unit.
Top: 30 cm (11-3/4 in)
Rear: 20 cm (7-7/8 in)
Sides: 20 cm (7-7/8 in)
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes
from cold to hot, and do not locate this unit in an
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit,
which may cause an electrical shock, fire, damage to this
unit, and/or personal injury.
Avoid installing this unit where foreign object may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do not
place:
- Other components, as they may cause damage and/or
discoloration on the surface of this unit.
- Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
- Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage
other than specified.
To prevent damage by lightning, keep the power cable
and outdoor antennas disconnected from a wall outlet or
this unit during a lightning storm.
Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reasons.
When not planning to use this unit for long periods of
time (i.e. vacation), disconnect the AC power plug from
the wall outlet.
Be sure to read the "TROUBLESHOOTING" section on
common operating errors before concluding that this unit
is faulty.
En
17 Before moving this unit, press 6 to set this unit to the
standby mode, and disconnect the AC power plug from
the wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the power off, then leave this unit
alone for cooling.
20 Install this unit near the AC outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.
22 Excessive sound pressure from earphones and
headphones can cause hearing loss.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you set this unit to
standby mode by CJ. In this state, this unit is designed to consume a
very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
This label is required to be attached to a product of which
the temperature of the top cover may be hot during
operation.
CONTENTS
INTRODUCTION
USEFUL FEATURES
SUPPLIED ACCESSORIES
CONTROLS AND FUNCTIONS
Front panel
Front panel display
Rear panel
Remote control.
Zone 2 remote control (R-S700 only)
Using the remote controls
ADVANCED OPERATION
2
3
4
4
6
7
8
10
II
Connecting speakers and source components
Connecting the FM and AM antennas
Using COUPLER jacks (R-S700 only)
Connecting power cable
12
12
14
15
15
.40
Option menu items
40
ADVANCED SETUP
43
Changing the ADVANCED SETUP
menu parameters
Switching the remote control ID
ZONE 2
Connecting Zone 2 components
Controlling Zone 2
REMOTE CONTROL FEATURES
PREPARATION
CONNECTIONS
SETTING THE OPTION MENU
FOR EACH INPUT SOURCE
Controlling this unit, a TV, or other components
Configuring the remote control
43
44
45
45
46
47
47
49
ADDITIONAL INFORMATION
TROUBLESHOOTING
SPECIFICATIONS
50
57
BASIC OPERATION
PLAYING AND RECORDING
Playing a source
Adjusting the tonal quality
Recording a source
Using the sleep timer
FM/AM TUNING
Automatic tuning
Manual tuning
Automatic station preset (FM stations only)
Manual station preset..
Recalling a preset station
Clearing a preset station
Clearing all preset stations
LISTENING TO SIRIUS Satellite Radio™
Connecting the SiriusConnect™ tuner
Activating SIRIUS Satellite Radio™
subscription
SIRIUS Satellite Radio™ operations
Registering and recalling SIRIUS
Satellite Radio™ channels
Setting the Parental Lock
Displaying the SIRIUS Satellite Radio™
information
PLAYING BACK TUNES
FROM YOUR iPhone/iPod/
Bluetooth™ COMPONENT
Using a Universal Dock for iPod
Using a Wireless System for iPod
Using a Bluetooth Wireless Audio Receiver
16
16
17
19
19
20
20
21
22
23
24
24
25
26
27
27
28
30
32
34
35
36
37
38
1 En
USEFUL FEATURES
This unit allows you to:
Improve sound quality by using the CD Direct Amp*1 and Pure
Direct functions
•
Play back music from your iPhone/iPod*2 or Bluetooth
component*2
•
•
•
•
•
•
Play back video content from your iPhone/iPod*1 *2
Listen to SIRIUS Satellite Radio channels*3
Listen to FM and AM radio stations
Boost bass sounds by connecting a subwoofer
Connect an external device*1 such as a graphic equalizer or a
surround-sound processor
Use this unit's remote control to operate other components such
as a CD player, BD/DVD player or TV
Save power by using the automatic power down function
Use this unit to listen to another input source in two different
rooms
*1
•
•
•
p.17
p.35
p.36
p.26
p.20
p.12
p.15
p.47
p.43
p.45
R-S700 only
*2 Optional Yamaha product required
*3
Optional SiriusConnect tuner required
SIRlusiI
REA D Y
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights
reserved. Service not available in Alaska and Hawaii.
iPhone, iPod
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.
• o'C,{< indicates a tip for your operation.
• This manual is the owner's manual for both the R-S700 and the R-S500. Model names are given where the details of functions are
unique to each model. Generally, illustrations of the R-S700 are used for explanations.
• Some operations can be performed by using either the buttons on the front panel of this unit or those on the remote controls. In case
the button names differ between this unit and the remote controls, the names of the buttons on the remote controls are given in
parentheses.
• In case the buttons on the remote control and the Zone 2 remote control have certain functions in common, the illustrations of the
buttons on the remote control are used for explanation throughout the manual.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
2
En
SUPPLIED ACCESSORIES
Please check that you received all of the following parts.
Remote control
.....
16)
I
10
Power cable
(R-S700 only)
AM loop antenna
......
_...,
I I
Zone 2 remote control
(R-S700 only)
161
1....1
1
8 8 e ~
8 8 8 @
(3 8 (3 ~
F.
8
0 0 0 """'
I\1VO<
NO
Indoor FM antenna
Batteries (x2)
(AAA, R03, UM-4)
AM
<l,""",<>
1"""'1 I
""-
IX
A
......
1I
B
I I"'" I
~~VOBE
·~I
~Q
o
•
,,,,,,,,=
REC
'I'
1~IIDlloollc>1
lJI'
lJI.
1I-oqII~II-oqII-11
TV
CD CD CD
rn
CD CD CD
~
~
CD CD CD
_lET
CD
~
~~
~
~
@YAMAHA
•
Notes on remote controls and batteries
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following conditions:
- places of high humidity, such as near a bath
- places of high temperatures, such as near a heater or stove
- places of extremely low temperatures
- dusty places
Use AAA, R03, UM-4 batteries for the remote control.
Use a CR2025 battery for the Zone 2 remote control (R-S700 only).
Insert batteries according to the polarity markings (+ and -).
Change all batteries if you notice the operation range of the remote control narrows.
If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked material. If the leaked material
comes into contact with your skin or gets into your eyes or mouth, rinse it away immediately and consult a doctor. Clean the battery
compartment thoroughly before installing new batteries.
Do not use old batteries together with new ones. This may shorten the life of the new batteries or cause old batteries to leak.
Do not use different types of batteries (such as alkaline and manganese batteries) together. Batteries that look the same may have a
different specification.
Before inserting new batteries, wipe the battery compartment clean.
Dispose of batteries according to your regional regulations.
3
En
CONTROLS AND FUNCTIONS
Front panel
1 2
3
10
1-------1-----1- -
-
-
-
11
13
--- --- -- -- -
14
16
- - --1----,
@VAMAHA
e .....
e ... ~NeE
TIIlI!BLl!
°
MAIN ZONE
<!>
3
I-OUONI!8S
~
"...
0+
3
0+
0.
C
-----c
18
19
fi!ImII indicates buttons and controls that can also be used to
control Zone 2. For more infOImation about Zone 2, see pages 45
and 46.
CD
MAIN ZONE c.>
Turns on this unit's Main Zone unit or sets the Main Zone
to standby mode (see page 16).
Note
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
®
MAIN ZONE indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
Note
The MAIN ZONE indicator is brightly lit while an iPhoneliPod is
charging.
@ SPEAKERS AlB
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS 8 terminals on the rear
panel each time the corresponding button is pressed (see
page 16).
@ DIMMER
Changes the brightness level of the front panel display.
Choose brightness from 3 levels by pressing this button
repeatedly.
4
En
(R-S700)
This setting is retained even if you tum off this unit.
®
FM MODEIINFO
Changes the FM radio wave reception mode (stereo or
monaural) when TUNER is selected as the input source
(see page 21).
Changes the SIRIUS Satellite Radio information
displayed on the front panel display when SIRIUS is
selected as the input source (see page 34).
Changes the playback information displayed about the
song playing on the iPhoneliPod when DOCK is selected
as the input source (see page 36).
Note
Playback information can only be displayed for an iPhoneliPod
that is connected using a Universal Dock for iPod.
®
MEMORY
Stores the current FMIAM station as a preset when
TUNER is selected as the input source (see page 23).
Stores the current SIRIUS channel as a preset when
SIRIUS is selected as the input source (see page 30).
(J) CLEAR
Clears the current FM/AM preset station when TUNER is
selected as the input source (see page 24).
Clears the current SIRIUS preset channel when SIRIUS is
selected as the input source (see page 32).
®
Front panel display
Shows information about the operational status of this
unit.
CONTROLS AND FUNCTIONS
® PRESET <I > f1!lmI
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Selects a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
@) FM/CATEGORY <:J, AM/CATEGORY l> f1!lmI
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
TUNING/CH <<I >> fI!lmII
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
®
®
Remote control sensor
Receives infrared signals from the remote control.
@ REC OUT selector
Selects a source for recording to a CD recorder or to a tape
deck independently of the INPUT selector setting,
allowing you to record the selected source while listening
to another source (see page 19).
@ BASS control
Increases or decreases the low frequency response. The
center position produces a flat response (see page 18).
®
TREBLE control
Increases or decreases the high frequency response. The
center position produces a flat response (see page 18).
@ BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (see page
18).
@ LOUDNESS control
Switch the remote control ID between IDI and 1D2 when using
multiple Yamaha receivers or amplifiers (see page 44).
Retains a full tonal range at any volume level to
compensate for the human ears' loss of sensitivity to high
and low-frequency ranges at a low volume level (see page
18).
@ ZONE2
®
Turns on Zone 2 or sets ZONE 2 to standby mode. When
Zone 2 is turned on, signals are output to the ZONE 2
OUT jacks (see page 45).
®
Note
@ ZONE 2 CONTROL
Allows buttons and controls on the front panel to be used
to control Zone 2. For more information about controlling
Zone 2, see page 46.
INPUT selector f1!lmI
Selects the input source you want to listen to.
VOLUME control (f1!lmI R·S700 only)
Increases or decreases the sound output level.
Nott,This does not affect the output level of the REC jacks.
@ CD DIRECT AMP and indicator (R-S700 only)
Allows you to listen to a CD source in the purest possible
sound (see page 17). The indicator lights up and the front
panel display turns off when this function is turned on.
Notes
• Ifboth the CD DIRECT AMP and the PURE DIRECT are
turned on, only the CD DIRECT AMP will function.
• Zone 2 cannot be used while this function is turned on.
@ PURE DIRECT and indicator
Allows you to listen to a source in the purest possible
sound (see page 17). The indicator above it lights up and
the front panel display turns off when this function is
turned on.
Note
Zone 2 cannot be used while this function is turned on.
@ PHONES jack
Outputs audio to your headphones for private listening.
Note
Press SPEAKER AlB so that the SP AlB indicators tum off
before you connect your headphones to the PHONES jack.
5
En
CONTROLS AND FUNCTIONS
FrtJfJlR-R.,l1fspJa,
~lNO I~K
~ tPE L~I~E
tNER CD
SP A SP B PRESET MEMORY CATEGORY TUNED STEREO
f f 1 ?-----,
1
=I~INE 2 =f L1N~I~
HOLD ZONE 2 SLEEP MUTE
~!-===I =================
CD
SP (SPEAKERS) AlB indicators
Light up according to the set of speakers selected.
Both indicators light up when both sets of speakers are
selected.
®
® Input source indicators
Light up brightly to indicate the input source that is
currently selected.
@ Multi-information display
Shows information when adjusting or changing settings.
@ PRESET indicator
Displays the current volume level.
Lights up when you recall a preset radio station or SIRIUS
channel. Blinks while the automatic station preset feature
is scanning for FM stations to register as presets.
@ MEMORY indicator
Lights up or blinks when an FMI AM station or SIRIUS
channel is being stored as a preset.
®
CATEGORY indicator
Lights up when searching for a SIRIUS channel by
category.
®
TUNED indicator
Lights up when this unit is tuned in to an FM or AM
station.
(j) STEREO indicator
Lights up when this unit is receiving a strong signal for an
FM stereo broadcast.
®
HOLD indicator
Blinks when the hold function is used to display the artist
name, song title, etc. while listening to a SIRIUS channel.
® ZONE 2 indicator
Lights up when Zone 2 is turned on.
@l SLEEP indicator
Lights up when the sleep timer is turned on.
® MUTE indicator
Blinks while the MUTE function is turned on.
6
En
P indicator
Lights up when a preset number is selected. Blinks while
you are registering a preset radio station or SIRIUS
channel.
@ Volume indicator
CONTROLS AND FUNCnONS
Rear panel
1
'-i-' i
f
7
8
(R-S700)
I
r :0_"00
- "'00 e-:
_
~
I
~-
~g @)::Oo ~=
iJ.:.
'~o ~
a IJ~
:::0
"00
I"""" ... -~
0
00'00;
_.~
~.:
~ =
8
~ 'O~
oo·o~
..
.. 0
<0
~
l:
9
10
-
~
11
-
-
\b)
+
~A~
QJ.I81~
[:]
gJl-::==0..l..cll!!
33 0 75~B~ ~~
@
~~,
=
...,.....
.
---~
~
[ll[]
<0
- - --
I
<!~
®
".
......""'"
SELfCT(UII'ID'1IWUI4NCE
..-"'"
<!l
=:r
+
.........
I
I
13
14
<!~
16
CD
TRIGGER OUT jack (R-S700 only)
When this unit is turned on or when a certain input source
is selected, this unit can send a 12 V/lOO rnA direct
electric current via the TRIGGER OUT jack that can be
used to control an external component. The current is sent
according to the "Trigger out" setting in the Option menu
(see page 40).
Note
Do not connect a component that requires more than 100 rnA of
electric current, otherwise the component may not perform
consistently or properly due to insufficient power.
®
REMOTE 2 IN jack (R-S700 only)
Used to receive remote control signals (see page 45).
@ REMOTE 1 IN/OUT jacks
Used to send and receive remote control signals (see page
45).
<ill
18
19
@ CD jacks
Used to connect a CD player (see page 12).
®
LINE 1-3 jacks
Used to connect audio components (see page 12).
@ iPod VIDEO output jack (R-S700 only)
Used to send iPhoneliPod video content to a video
monitor, such as a TV (see page 35).
Notfl
Video content output is possible only when an iPhoneliPod is
connected this unit using a Universal Dock for iPod (such as the
YDS-12).
@ SIRIUS jack
Used to connect SiriusConnect tuner (sold separately) (see
page 27).
®
@ GND terminal
COUPLER jacks (R·S700 only)
Used to connect an external unit (see page 15).
Used to connect a turntable (see page 12).
@ SUBWOOFER OUT jack
®
ZONE 2 OUT jacks
Used to connect a Zone 2 component (see page 45).
Used to connect a subwoofer with built-in amplifier (see
page 12).
®
@ POWER MANAGEMENT switch
Antenna terminals
Used to connect FM and AM antennas (see page 14).
(j) TAPE jacks
Used to connect a tape deck (see page 12).
®
DOCKjack
Used to connect an optional Yamaha Universal Dock for
iPod (such as the YDS-12), Wireless System for iPod
(YID-W 10), or Bluetooth Wireless Audio Receiver
(YBA-IO) (see page 35).
®
PHONO jacks
Used to connect a turntable (see page 12).
Used to enable or disable the automatic power down
function. When this function is enabled, this unit's Main
zone and Zone 2 automatically enters standby mode if this
unit is not operated for a certain amount oftime (3 settings
are available; see page 43).
@ SPEAKERS terminals
Used to connect speakers (see page 12).
@ IMPEDANCE SELECTOR switch
Used to select the impedance setting (see page 13).
@) AC IN (R-S700 only)
Used to plug in the supplied power cable (see page 15).
7
En
CONTROLS AND FUNCnONs
Remote control
This section describes the function of each button on the
remote control used to control this unit or other
components made by Yamaha or other manufacturers.
® RECEIVER 0 I6!ImII
Turns this unit on, or sets it to standby mode.
@ 10
Changes the remote controllD (see page 44).
I6!ImII
indicates buttons that can also be used to control Zone 2.
For more information about Zone 2, see pages 45 and 46.
(1)>-----
~~Tnl---~
II
o
MAINIZONE 2
Switches the zone to be operated by the remote control
between the Main Zone and Zone 2 (see page 46).
®
SLEEP
Sets the sleep timer (see page 19).
®
Input selector buttons I6!ImII
Selects the input source and changes the control area (see
page 47).
_/XJ£,
~'DIIII
see
(j) OPTION
Turns the OPTION menu on and off (see page 40).
6
® SPEAKERS AlB
Turns on and off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed.
®
MUTE I6!ImII
Mutes the sound output. Press again to restore the sound
output to the previous volume level.
I\~-::-(I
~
~A
~B
@
Note
/Z>.
~
RETURN
Returns to the previous menu or ends the menu display
when using the Option menu (see page 40).
TV
1
[IJ IT] ( I )
IT]
CD CD
[IJ
CD CD
~ m @@
@- -~I~
~
~
~
En"),
't.Y
@YAMAHA
'-
•
Common controls
The following buttons can be used no matter which input
source is selected.
CD
Infrared signal transmitter
Sends infrared signals.
8
En
This does not affect the output level of the REC jacks.
®
....--
CD
@J VOLUME +/- (16!ImII R-S700 only)
Increases or decreases the sound output level.
@ 1'>. / V' / <J / t> / ENTER
Selects and confirms items in the Option menu (see page
40).
@ CODE SET/RECEIVER
Used to program the remote control so that it can control
your other external components (see page 49).
After using the remote control to control one of your
components, this button is used to switch the remote
control to receiver mode so that remote control commands
will be sent to this unit (see page 48).
CONTROLS AND FUNCTIONS
•
•
SIRIUS and FM/AM controls
The following buttons can be used when SIRIUS or
TUNER is selected as the input source.
®
TUN.lCH ~ I ~ IfEmI
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
The following buttons can be used to control external
audio/video components when CD, TAPE, PHONO,
LINE 1, LINE2, or LINE3 is selected as the input source.
For more information, see page 47.
®
RETURN
® LlI \l I <J II> I ENTER
®
@ PRESET AI v IfEmI
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Select a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
External component controls
Numeric buttons, ENTER
@ TOP MENU
® MENU
@ DISPLAY
@ FM/CATEGORY <J, AM/CATEGORY c> IfEmI
@ SOURCE 0
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
®
®
External component control buttons
TV control buttons
®
Numeric buttons, ENTER IfEmI
Specifies the frequency or the preset number of the FM/
AM station when TUNER is selected as the input source
(see page 21).
Specifies the channel number or preset number of the
SIRIUS channel when SIRIUS is selected as the input
source (see page 30).
@ INFO
Changes the SIRIUS Satellite Radio information
displayed on the front panel display when SIRIUS is
selected as the input source (see page 34).
•
iPod controls
The following buttons can be used when DOCK is
selected as the input source for listening to an iPhone/
iPod. For more information, see page 35.
®
REPEAT 0
®
MENUlI>DD II<J<lI t>t>ll ENTER
IfEmI
@ INFO
@ SHUFFLE:::x:::
9
En
CONTROLS ANO FUNCTIONS
Zone 2 remote control (R-S700 only)
This section describes the function of each button on the
Zone 2 remote control, which is used to control Zone 2.
CD------..
MUTE
Mutes the sound output to Zone 2. Press again to restore
the sound output to the previous volume level.
(j) VOLUME +/Increases or decreases the sound output level of Zone 2.
(0
tV
®
•
III
~
I«PIINJ~ «W'E ~ ¢ co )
III ~ ~ ((lIffi (tmJ)
10
«SIU)II~ :'lA£i«T':;)
5
¢1INIl)
1
'aDr
SIRIUS and FM/AM controls
The following buttons can be used when SIRIUS or
TUNER is selected as the input source for Zone 2.
®
III
~e~
<C~JI'»
FM/CATEGORY <J, AM/CATEGORY I>Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
®
PRESET</>
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Selects a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
@) TUN.lCH«
/»
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
@VAMAHA
1 - - - Insulation sheet
Note
The Zone 2 remote control comes with a battery already installed.
Before using the Zone 2 remote control for the very first time,
pull out the insulation sheet, as shown.
•
Common controls for Zone 2
The following buttons can be used no matter which input
source is selected for Zone 2.
CD
Infrared signal transmitter
Sends infrared signals.
® 6
(Zone 2 standby)
Sets Zone 2 to standby mode.
@
I (Zone 2 on)
Turns on Zone 2.
G) 10
Changes the Zone 2 remote control ID (see page 44).
®
Zone 2 input selector buttons
Selects the desired input source for Zone 2.
10
En
®
Numeric buttons, ENTER
Specifies the frequency or the preset number of the FM/
AM station when TUNER is selected as the input source
(see page 21).
Specifies the channel number or preset number of the
SIRIUS channel when SIRIUS is selected as the input
source (see page 30).
•
iPod controls
The following buttons can be used when DOCK is
selected as the input source for Zone 2, for listening to an
iPhone/iPod. For more information, see page 35.
em
MENU! t>DD /1<J<I/1>I>l/ ENTER
CONTROLS AND FUNCTIONS
•
Yamaha CD player controls
The following buttons can be used to control a Yamaha
CD player when CD is selected as the input source for
Zone 2.
• I<1<J
• I>C>l
.~
• <l<I
•
[>{>
Skips backward
Skips forward
Ejects the disc
Rewinds playback
Fast-forwards playback
Not all Yamaha CD players can be controlled by the Zone 2
remote controL
•
Operation range
The remote controls transmit a directional infrared beam.
Be sure to aim the remote controls directly at the remote
control sensor on the front panel of this unit or on the
infrared signal receiver in Zone 2 during operation.
•
Replacing the battery in the Zone 2
remote control
Change the battery when the operation range of the Zone 2
remote control decreases.
Remote control or Zone 2
remote control
/~\- St..'ghtp'"
~dSl
~d'~~
1~~4
~
CR2025 battery
11
En
CONNECTIONS
Connecting ipeakers and source components
CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "-" to "_". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner's manual for each of your components.
• Use RCA cables for audio components (except for speaker connections and DOCK jack connections).
• The IMPEDANCE SELECTOR must be set to the appropriate position before connecting speakers. See page 13 for
details.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the
speakers.
For information about
other components that
can be connected to
this unit, see page 35.
Turntable
UdiO
~
out
RL
CD player
~UdiO
~UdiO
AUd~.OAUdO·O
out
out
out
RL
RL.
AL
Speakers A
@
@
@
@)
0)
0)
RL
In
@
©
@
@
a
VCR, etc.
DVD player,
etc.
CD recorder,
etc.
Subwoofer
a
Speakers B
",
~<i>~
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
12
En
CONNECTIONS
•
IMPEDANCE SELECTOR switch
CAUTION
Do not change the IMPEDANCE SELECTOR switch
while the power of this unit is turned on, as doing so may
damage the unit.
If the unit fails to tum on, the IMPEDANCE SELECTOR
switch may not be fully slid to either position. If this is the
case, remove the power cable and slide the switch all the
way to either position.
Select the switch position (LOW or HIGH) according to
the impedance of the speakers in your system.
•
Switch
position
Impedance level
HIGH
• If you use one set (A or B), the impedance of
each speaker must be 6 Q or higher (R-S700)
or 8 Q or higher (R-S500).
• If you make bi-wire connections, the
impedance of each speaker must be 6 Q or
higher (R-S700) or 8 Q or higher (R-S500).
See page 13 for Bi-wire connection.
LOW
• If you use one set (A or B), the impedance of
each speaker must be 4 Q or higher.
• If you use two sets (A and B) simultaneously,
the impedance of each speaker must be 8 Q or
higher.
• If you make bi-wire connections, the
impedance of each speaker must be 4 Q or
higher. See page 13 for Bi-wire connection.
Connecting speaker cables
-SPEAKfRs -
__
•
Bi-wire connection
Hi-wire connection separates the woofer from the
combined midrange and tweeter section. A bi-wire
compatible speaker has four binding post terminals. These
two sets of terminals allow the speaker to be split into two
independent sections. With these connections, the mid and
high frequency drivers are connected to one set of
terminals and the low frequency driver to another set of
terminals.
This unit
"""""-----
Speaker
Connect the other speaker to the other set of terminals in
the same way.
CAUTION
When making bi-wire connections, set the IMPEDANCE
SELECTOR switch to HIGH or LOW depending on the
impedance of your speakers:
6 n or higher: HIGH (R-S700)
8 n or higher: HIGH (R-S500)
4 n or higher: LOW
See page 13 for more information about the
IMPEDANCE SELECTOR switch.
Note
When making bi-wire connections, remove the shorting bridges
or cables on the speaker.
,0,
~<i>~
Note
When inserting speaker cables into the speaker terminals, insert
only the bare speaker wire. If insulated cable is inserted, the
connection may be poor and sound may not be heard.
•
Connecting via banana plug
Tighten the knob and then insert the banana plug into the
end of the corresponding terminal.
To use the bi-wire connections, press SPEAKERS A and
SPEAKERS B on the front panel or on the remote control so that
both SP A and B light up on the front panel display.
-
I
'lSo'lSlJ 0-0
CH)
I
00
6'0
6~ r~ ft ffi, ij..;~~ 0
SPEAKERS AlB
8ee~
eee~'"
88S~
11'0
..
,..
~
00 0'. (:V
<lCflllKll'I'>
~1r-!f!'Il--'-r-ITmiiD-'
-.--t'--'-,-
SPEAKERS AlB
13
En
CONNECTIONS
Connecting' the~FM and AM,antennas
Indoor antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should
provide sufficient signal strength. Connect each antenna correctly to the designated terminals.
Note
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
Indoor FM antenna
(included)
Outdoor FM antenna
Outdoor AM antenna
Use'S to 10 m of vinylcovered wire extended
outdoors from a window.
AM loop antenna
(included)
o
• The AM loop antenna
should always be connected,
even if an outdoor AM
antenna is connected to this
unit.
• The AM loop antenna
should be placed away from
this unit.
I
I
I
I
I
I
a
I
I
I
I
I
Ground (GND terminal)
For maximum safety and minimum interference. connect
the antenna GND terminal to a good earth ground. A
good earth ground is a metal stake driven into moist earth.
•
Assembling the supplied AM loop
antenna
14
En
•
~
~
/?
~
Connecting the wire of the AM loop
antenna
CONNECTIONS
Removing the jumper pins from the PRE OUT/MAIN IN
jacks enables this unit to operate separately as a control
amplifier or a power amplifier. These jacks are used to
connect a signal-processing system such as a graphic
equalizer or a surround-sound processor to this unit. If an
external unit is connected to these jacks, the VOLUME
control of this unit can be used to adjust the overall sound
output level.
To connect an external unit, first remove the jumper pins
from the PRE OUT/MAIN IN jacks and then connect the
input jacks of that external unit to the PRE OUT jacks or
its output jacks to the MAIN IN jacks. For details, refer to
the owner's manual included with the external unit to be
connected.
COUPLER
Plug the power cable into the AC IN on the rear panel of
this unit (R-S700 only).
Plug the power cable into the AC wall outlet after all other
connections are complete.
SUB
PCItYER
WOOFER MANAGEIIEHT
MAIN IN
®
©
,f-
LOfFON
00
em
®
©
PRE OUT
• If you do not use the COUPLER jacks, never remove the
jumper pins from these jacks. If removed, no sound will be
output from this unit.
• Before installing or removing the jumper pins, be sure to
disconnect the power cable of the unit. Leaving the power cable
connected could cause noise to be emitted from the speakers or
damage the unit.
• When you use this unit as a power amplifier, connect the output
jacks of the external control amplifier, etc. to the MAIN IN
jacks of this unit. In this case, the controls of this unit will not
function except the PHONES jack and the SPEAKERS AlB
buttons. Use the controls on the external control amplifier to
make volume adjustments, etc.
15
En
PLAYING AND RECORDING
CAUTION
Extreme caution should be exercised when you play back CDs encoded in DTS.
If you play back a CD encoded in DTS on a CD player that does not support DTS, only noise will be heard, and this noise
may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output
level of your CD player before you play back a CD encoded in DTS.
3
Press SPEAKERS A and/or SPEAKERS B on
the front panel or on the remote control to
select speakers A and/or speakers B.
When speaker set A or speaker set B are turned on,
SP A or SP B is displayed on the front panel display
accordingly (see page 6).
Note$
SPEAKERS AlB
INPUT selector
MAIN ZONE c!.J
VOLUME
,.,,~.c,......c,.....~w_
• When one set of speakers is connected using bi-wire
connections, or when using two sets of speakers simultaneously
(A and B), make sure SP A and SP B are displayed on the front
panel display.
• When listening with headphones, tum off the speakers.
4
Play the source.
5
Rotate the VOLUME control on the front
panel (or press VOLUME +/- on the remote
control) to adjust the sound output level.
RECEIVER c!.J
Input selector
buttons
SPEAKERS AlB
,"
~<i'~
You can adjust the tonal quality by using the BASS, TREBLE,
BALANCE and LOUDNESS controls, the CD DIRECT AMP
switch (R-S700 only), or the PURE DIRECT switch on the front
panel (see page 17).
6
VOLUME +/-
1
Press MAIN ZONE 6 on the front panel (or
RECEIVER 6 on the remote control) to turn
on this unit.
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the input source
you want to listen to.
16
En
Press MAIN ZONE 6 on the front panel again
(or RECEIVER 6 on the remote control) to
finish using this unit and set it to standby
mode.
PLA YING AND RECORDING
A(liu~fi"9 the togalquality
.,'
•
n,','"
:.'.",,'
'\>,:..
...: . ; , . : " , . ' .' :',',
·i,i'<····,·,
Using the CD DIRECT AMP switch
(R-S700 only)
CD Direct Amp feature
Generates a normal phase and reverse phase signal for
both the left and right channels from the input signal
and uses the four electronic volumes to send a
balanced signal to the amplifying circuit. This feature
provides clearer sound as a result of:
• improved signal-to-noise ratio
• external noise canceling
• reduced distortion
Routes input signals from your CD player directly to the
specially built-in amplifier for the CD player. As a result,
the input signals bypass the INPUT selector and the
BASS, TREBLE, BALANCE and LOUDNESS controls
and then sent to the power amplifier, thus eliminating any
alterations to the CD signals and creating the purest
possible sound. The CD DIRECT AMP indicator lights up
and the front panel display turns off after a few seconds.
•
Using the PURE DIRECT switch
Routes input signals from your audio sources so that the
input signals bypass the BASS, TREBLE, BALANCE and
LOUDNESS controls, thus eliminating any alterations to
the audio signals and creating the purest possible sound.
The PURE DIRECT indicator lights up and the front panel
display turns off after a few seconds.
Notes
• Zone 2 cannot be used while the PURE DIRECT feature is
turned on.
• The BASS, TREBLE, BALANCE, and LOUDNESS controls
do not function while the PURE DIRECT feature is turned on.
• This setting is retained even if you tum off this unit.
CD DIRECT AMP switch
Notes
• Ifboth the CD DIRECT AMP and the PURE DIRECT switches
are turned on, only the CD DIRECT AMP switch will function.
• Zone 2 cannot be used while the CD DIRECT AMP feature is
turned on.
• The INPUT selector and the BASS, TREBLE, BALANCE, and
LOUDNESS controls do not function while the CD DIRECT
AMP feature is turned on.
• A CD player must be connected to the CD jacks in order to use
the CD DIRECT AMP feature.
• This setting is retained even if you tum off this unit.
17 En
PLA YING AND RECORDING
•
Adjusting the BASS and TREBLE
controls
•
Adjusting the LOUDNESS control
LOUDNESS
VOLUME
The BASS and TREBLE controls adjust high and low
frequency response.
The center position produces a flat response.
BASS
When you feel there is not enough bass (low frequency
sound), rotate clockwise to boost. When you feel there is
too much bass, rotate counterclockwise to suppress.
Control range: -10 dB to + 10 dB (20 Hz)
Retain a full tonal range at any volume level, thus
compensating for the human ears' loss of sensitivity to
high and low-frequency ranges at low volume.
CAUTION
TREBLE
When you feel there is not enough treble (high frequency
sound), rotate clockwise to boost. When you feel there is
too much treble, rotate counterclockwise to suppress.
Control range: -10 dB to + 10 dB (20 kHz)
If the CD DIRECT AMP switch (R-S700 only) or the
PURE DIRECT switch is turned on with the LOUDNESS
control set at a certain level, the input signals bypass the
LOUDNESS control, resulting in a sudden increase in the
sound output level. To prevent your ears or the speakers
from being damaged, be sure to press the CD DIRECT
AMP switch (R-S700 only) or the PURE DIRECT switch
after lowering the sound output level or after checking that
the LOUDNESS control is properly set.
•
1
Set the LOUDNESS control to the FLAT
position.
2
Rotate the VOLUME control on the front
panel (or press VOLUME +/- on the remote
contrOl) to set the sound output level to the
loudest listening level that you would listen
to.
3
Rotate the LOUDNESS control until the
desired volume is obtained.
Adjusting the BALANCE control
1 ' - 1 Deroo
0Y '.
li·,f'~~J~J~~~~·.~~jril~f:c~r
BALANCE
The BALANCE control adjusts the sound output balance
of the left and right speakers to compensate for sound
imbalance caused by speaker locations or listening room
conditions.
'"
~tfl~
After setting the LOUDNESS control, enjoy listening to music at
your preferred volume level. If the effect of the LOUDNESS
control setting is too strong or weak, readjust the LOUDNESS
control.
18
En
PLA YING AND RECORDING
tiilng,tils
s1e,ptimer::
....
.-:,-""'-
• Audio signals are not output to the TAPE REC or LINE I REC
output jacks when TAPE or LINE I is selected with the REC
OUT selector.
Audio signals are output to both the TAPE REC and the LINE I
REC output jacks if when PHONO, DOCK, TUNER, CD,
SOURCE or LINE 2 is selected with the REC OUT selector.
• This unit must be turned on in order to record.
• The VOLUME, BASS, TREBLE, BALANCE and
LOUDNESS controls and the CD DIRECT AMP switch (RS700 only) and the PURE DIRECT switch have no effect on the
source being recorded.
• Check the copyright laws in your country before recording from
records, CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.
~.
""
~
Use this feature to automatically set this unit to standby
mode after a certain amount of time. The sleep timer is
useful when you are going to sleep while this unit is
playing or recording a source.
MAINZONE(')
RECEIVER (')
, .. ,M
REC OUT selector
1
INPUT selector
Rotate the REC OUT selector on the front
panel to select the source you want to
record.
When SOURCE is selected, the current input source
is output.
Notes
• The sleep timer can only be set with the remote control.
• The sleep timer automatically turns off Zone 2. However, Zone
2 components are not turned off.
1
Note
SIRIUS Satellite Radio broadcasts cannot be recorded.
2
SLEEP
Play the source and begin recording using
the recording device connected to the REC
jacks (TAPE and/or LINE 1) on the rear panel.
See page 12.
Press SLEEP repeatedly to set the amount of
time before this unit is set to standby mode.
Each time you press SLEEP, the front panel display
changes as shown below.
The SLEEP indicator blinks while setting the amount
of time for the sleep timer.
••• SLEEP •••
SPA
"j ,,::: C:j
r:': ..
: .1••• '.... I::
.I.
..'
i : .
~
'°rln
LldB
If the sleep timer is set, the SLEEP indicator on the
front panel display lights up.
,',
~<i>~
• To disable the sleep timer, select "Sleep Off'.
• The sleep timer setting can also be canceled by pressing
RECEIVER <!J on the remote control (or MAIN ZONE <!J on
the front panel) to set this unit to standby mode.
19
En
FM/AM TUNING
There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of
station signals.
Automatic tuning .
3
Automatic tuning is effective when station signals are
strong and there is no interference.
I~'
.=-=-c::-:,::"~=-=I
00'0' 0 0-0
"600 0# '~, .~, ,~,·:m.
DO
-: 0
o
'-
-1-.,....-....,-""'"
l-.:..l-"';"-~.,---'-'-----I-
INPUT selector
TUNINGICH
«I»
FM,AM
Press and hold TUNING/CH <<I >>on the
front panel (or TUN.lCH ~ I ~ on the remote
control) for more than 1 second to begin
automatic tuning.
Press» (or ~) to tune in to a higher frequency.
Press« (or~) to tune in to a lower frequency.
Notes
• When you tune in to a station, the frequency of the station is
displayed on the front panel display.
• If the tuning search does not stop at the desired station because
the station signals are weak, try using the manual tuning
method.
•
Auto Mute feature
When listening to an FM radio station, the output will
automatically be muted when the radio signal is weak if
the station was tuned in to by:
• using the automatic tuning feature
• recalling a preset that was registered using the
automatic preset registration feature
If you want to listen to a station that has a weak signal,
tune in to the station manually.
I.,
- FM,AM
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input source.
2
Press FM or AM on the front panel (or FM or
AM on the remote control) to select the
reception band (FM or AM).
FM or AM is displayed on the front panel display.
20
En
FM/AM TUNING
,·Manualtunirig;,·.;
,~
-
~ -~:
-~'
4
,
Manual tuning is effective when station signals are weak
To tune in by direct frequency tuning, press
the numeric buttons on the remote control to
enter the frequency of the station.
Enter only integers. For example, if you want to set
the frequency to 88.9 MHz, enter "889",
• When you press the numeric buttons on the remote control
during preset tuning, a preset number is selected. Set the tuning
mode to frequency tuning mode using TUNING/CH
on
the front panel (or TUN JCH ~ / ~ on the remote control)
before pressing the numeric buttons,
• "WRONG STATION!" is displayed on the front panel display if
you enter frequency that is out of receivable range, Make sure
that the entered frequency is correct
« /»
INPUT selector
TUNINGICH
FM,AM
«I»
:,
','
a
"
•
Improving FM reception
If the signal from the station is weak and the sound quality
is not good, set the FM band reception mode to monaural
mode to improve reception.
TUNER
,)
FM,AM
,
CD CD CD
tv
rn
o
f--+7-- Numeric
CD,' CD CD ~.,
CD CD CD,~'
buttons
":::':\~I
,
"
1',;:
K'
•
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input source.
2
Press FM or AM on the front panel (or FM or
AM on the remote control) to select the
reception band (FM or AM).
FM or AM is displayed on the front panel display.
3
".' 1,1.
.10
~~.·rirJf~G
FM MODE/INFO
\,,;~'
;$vAJiAHA "", .
.
..
Press TUNINGICH <<I >>on the front panel
(or TUNJCH ~ I ~ on the remote control) to
manually tune in to the desired station.
1
Press FM MODE/INFO on the front panel
repeatedly to select "STEREO" (automatic
stereo mode) or "MONO" (monaural mode)
when this unit is tuned in to an FM radio
station.
• When MONO is selected, FM broadcasts will be
heard in monaural sound.
• When STEREO is selected and an FM station with
a stereo broadcast is tuned in, the broadcast will be
heard in stereo,
Note
The STEREO indicator on the front panel lights up while
listening to a station in stereo,
,',
~'i'~
The FM band reception mode (monaural or stereo) can also be
changed by selecting FM Mode in the Option menu (see page 40).
When you tune in to a station, the frequency of the received
station is shown in the front panel display.
21
En
FM/AM TUNING
Aillpm,(ic station,prl!set "
(fM stations only)
.
You can use the automatic station preset function to
automatically register FM stations as presets. This
function enables this unit to automatically tune in to FM
stations that have a strong signal and store up to 40 of
those stations in order. You can then easily recall any
preset station by selecting its PIeset number.
3
Press OPTION on the remote control.
The Option menu for TU ER is displayed (see page
40).
4
Press f::,. I \l on the remote control to select
"Auto Preset", and then press ENTER.
TIlNER
SPA
Notes
• If a station is registered to a preset number that already has a
station registered to it, the previously registered station is
overwritten.
• [fthe station you want to store is weak in signal strength, try
using the manual preset tuning method.
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
'"
':-(f)":
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET
on the front panel (or
PRESET A/V or 1:;,./\1 on the remote control).
• To cancel scanning, press FM or AM on the front panel (or FM
or AM or RETURN on the remote control).
</ >
'"
0<iJ~
FM stations registered as presets using the automatic preset
registration feature will be heard in stereo.
TIlNER
SP A
p 1;:J
PRESET MEMORY
I
Preset number
FM
PRESET
INPUT selector
<I>
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input sourse,
2
Press FM on the front panel (or FM on the
remote control) to select FM as the reception
band.
FM is displayed on the front panel display.
22
En
!:::'
....:
"I : F'i"'l
I
Frequency
When presets are registered, information is displayed
on the front panel display as shown in the illustration
above.
When scanning is complete, "FINISH" is displayed
and then the display returns to the Option menu.
To return the display to the original state, press
OPTION or RETURN on the remote control.
FM/AM TUNING
lIinual,ta';onp,esel~,
3
You can manually register up to 40 FM/AM stations
(40 total). You can then easily recall any preset station by
selecting its preset number.
<>
Press PRESET I on the front panel (or
PRESET A I v on the remote control) to
select the preset number to which the station
will be registered.
When you select a preset number to which no station
is registered, "EMPTY" is displayed. When you
select a preset number to which a station has already
been registered, the frequency of the station is
displayed.
S'.~
:
~ MEMORV
"F ::;:~ ';:::
···.::..-:·1..::.···
nJNER
1\JNED STEREO
·:···E i"'l FI or \1
MEMORY
-
I-nn
]U~i
Preset number
,I,
~<il~
You can also select a preset number using the numeric buttons on
the remote control.
4
Press MEMORY on the front panel.
When registration is complete, the display returns to
the original state.
,I,
~<il~
To cancel registration, RETURN on the remote control or do not
perform any operations for about 30 seconds.
RETURN
1
Tune in to the desired FM/AM station.
See pages 20 and 21 for tuning instructions.
2
Press MEMORY on the front panel.
"MANUAL PRESET" is displayed briefly on the
front panel display, and then the preset number to
which the station will be registered is displayed.
nJNER
SPA
1\)NED STEREO
Iii: .'. I
j..·l i\ i..,i j...! LN,
:"j .'.
i'l
·1.... "I"
I.... :.... I.... ••..
I·..· I'::: t. ::::: :::, i
__
C[""jll--'I'
J UilB
,I,
~<il~
By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (i.e., the
preset number following the last preset number used).
23
En
FMIAM TUNING
Recal.ling a pres.' station
Clearing a.prestilslation
You can recall preset stations that were registered using
automatic station preset or manual station preset.
-
..
11;0'
Follow the steps below to clear a preset station.
.-
0 0
1
1 0 0 66.
w:-a:~n 6-64-.0 60 <,
6o<ti,.,ll~
6~6b"'\'~rfiO Q
IJi:6Q
CLEAR
PRESET <I>
RETURN
1
<>
Press PRESET I on the front panel (or
PRESET A. I v on the remote control) to
select a preset number.
,',
1
See "Recalling a preset station" on page 24.
2
</ >
Press CLEAR on the front panel.
The selected preset number flashes on the front panel
display.
~<i>~
• Preset numbers to which no stations are registered are skipped.
• "NO PRESETS" is displayed ifno stations are registered.
• You can directly select a preset number by pressing the numeric
buttons on the remote control while recalling a preset station.
"EMfYfY" is displayed on the display if you enter a preset
number to which no station is registered. "WRONG NUM." is
displayed if you enter an invalid number.
• When you press the numeric buttons on the remote control
during nonnal tuning, a frequency is entered. Set the tuning
on the front
mode to preset tuning mode using PRESET
panel (or PRESET A / von the remote control) before
pressing numeric buttons.
Select the desired preset station number.
TUNER
lIJNED Sl<R£O
,-" ,"", i",
.r'·.i .!..·.i .'.:.:.:.' . . Lri i.U
~J
LJdB
."
~<i>~
To cancel clearing the preset station, press RETURN on the
remote control or leave this unit without any operations for about
30 seconds.
3
Press CLEAR on the front panel to confirm.
"PXX: CLEARED" (XX indicates the preset
number) is displayed on the front panel display, and
then the display returns to its original state.
24
En
FM/AM TUNING
C/~aring·allpreset stations.
4
Follow the steps below to clear all preset stations.
-
Press <1/ t> on the remote control to select
"YES", and then press ENTER.
nJNER
SPA
I
'
cs :0 0 0 0-0
6(; 0 0:1=
0..0
0
0
I DO
z~, t~, .::~.:
!
[] []
00
I
'........_..,JI
:
I
8ee.~
r-':
L.. I::. i"'! 1'1:.
i
i
i:::i
::
f
:'HO
i
I.....
i.': i:::' r:::.
! :........1
,0,
~<il~
To cancel without clearing the presets, select "NO".
I
When all presets have been cleared, "PRESET
CLEARED" is displayed, and then the display returns
to the Option menu.
INPUT selector
see
~II
8SS~'"
llJl'oEIl STEREO
PRESET
TUNER
SPA
•i.·.·.·: .i.·.·.·: .i.·.·
! : :
oo'o~
lUNER
nJrIED STEREO
PRESET
i.·.· ""II'"
: :.... i
=••••••••
:
:
ill':
I··..
ill':
f'''
r'J n
ti" L.. 1:::. i''': r::. I:::. ill': . - i] Lj~·~
C<3~t>
OPTION
5
To exit the Option menu, press OPTION or
RETURN on the remote control.
RETURN
1
Rotate the INPUT selector on the front panel
(or press TUNER on the remote control) to
select TUNER as the input sourse.
2
Press OPTION on the remote control.
The Option menu for TUNER is displayed (see
page 40).
3
Press f::" / v on the remote control to select
"Clr All Preset", and then press ENTER.
TUNER
SPA
:....
i.... :
TIJNED STEREO
roo
..
f"'i: I
,0,
~(j)-:'
To cancel the operation and return to the Option menu, press
RETURN on the remote control.
25
En
LISTENING TO SIRIUS Satellite Radio™
Listening to Satellite Radio
To listen to Satellite Radio, you'll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready
receiver. SIRIUS Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada.
Satellite Radio delivers a variety of commercial-free music from categories ranging from Pop, Rock, Country, R&B,
Dance, Jazz, Classical and many more plus coverage of all the top professional and college sports including play by play
games from select leagues and teams. Additional programming includes expert sports talk, uncensored entertainment,
comedy, family programming, local traffic and weather and news from your most trusted sources.
Once you've purchased a SIRIUS tuner you'll need to activate it and subscribe to begin enjoying the service. Easy to
follow installation and setup instructions are provided with the SIRIUS tuner. There are a variety of programming
packages available, including the option of adding "The Best of XM" programming to the SIRIUS service. The "Best of
XM" service is not available to SIRIUS Canada subscribers at this time. Please check with SIRIUS Canada for any
updates using the numbers and web address below.
Family friendly packages are also available to restrict channels featuring content that may be inappropriate for children.
To subscribe to SIRIUS, U.S. and Canadian customers can call 1-888-539-SIRI (1-888-539-7474) or visit sirius.com
(US) or siriuscanada.ca (Canada).
SIRIUS Radio Legal
SIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks
and logos are the property of their respective owners. All rights reserved. SIRIUS subscription sold separately. Taxes
and a one-time activation fee may apply. SIRIUS tuner required (sold separately) to receive the SIRIUS service. All
programming and fees subject to change. It is prohibited to copy, decompile, disassemble, reverse engineer, hack,
manipulate or otherwise make available any technology or software incorporated in receivers compatible with the
SIRIUS Satellite Radio System. Service not available in Alaska or Hawaii.
26
En
LISTENING TO SIRIUS Satellite Radio ™
Connecting the SiriusConnect™ .
Activating SIRIUS Satellite
Radio 1M subscription
.tuner
Connect the SiriusConnect tuner (sold separately) to the
SIRIUS jack on the rear panel of this unit. For details, see
the instruction manuals provided with the SiriusConnect
tuner.
SiriusConnect Tuner and the
antenna (sold separately)
Before using the SIRIUS Satellite Radio feature, you need
to activate your SIRIUS Satellite Radio subscription. To
activate the subscription you need the Sirius ID which is
uniquely assigned to the SiriusConnect tuner. A Sirius ID
is 12-digit number which is indicated on the package of
the SiriusConnect tuner and on the label of the
SiriusConnect tuner. The Sirius ID is also displayed on the
front panel display when you tune in to the SIRIUS
Satellite Radio channel "0".
•
• To ensure optimal reception of SIRIUS Satellite Radio signals,
the antenna of the SiriusConnect tuner must be placed at or near
a window with no obstacles in the path to the sky. You can
mount it indoors or outdoors. The orientation of the antenna for
the best reception differs depending on the area. Refer to the
instruction manuals provided with the SiriusConnect tuner for
information about antenna installation.
• Use the "Antenna" information on the front panel display (see
page 34) to check the antenna reception level and adjust the
orientation of the antenna.
• You need to connect the SiriusConnect tuner to the AC wall
outlet.
Displaying the Sirius ID of your
SiriusConnect tuner
INPUT selector
SIRIUS
-
Notes
• If "CHECK SR TUNER" or "ANTENNA ERROR" is
displayed on the front panel display, the SiriusConnect tuner or
antenna is not connected correctly. In such cases, check the
connection of the SiriusConnect tuner and the antenna.
• If"NOT SUPPORTED" is displayed on the front panel display,
this unit does not support the connected SiriusConnect tuner.
o
ENTER
@VAMAHA
27
En
LISTENING TO SIRIUS Satellite Radio ™
1
2
Rotate the INPUT selector on the front panel
(or press SIRIUS on the remote control) to
select SIRIUS as the input source.
operali"" .
Press 0 on the remote control and then
.ENTER to display the Sirius 10 of your
SiriusConnect tuner.
"000 Sirius lD" and "xxxxxxxxxxxx" is displayed
alternately on the front panel display.
("xxxxxxxxxxxx" indicates the l2-digit Sirius lD of
your SiriusConnect tuner.)
Write the Sirius lD below.
lD:
3
'SIR1US~ Satellite R6dil1rt:t ;
,
.,..
.
'I"''''
, . , ' . -..
~
~"or-:-r;J
~o j~;i;'~Tif.;rt.8:.09_~."
.' ,. '. 1- .......
FM MODE/INFO
INPUT selector
~-----------
Contact SIRIUS Satellite Radio to activate
your subscription.
SIRIUS Satellite Radio online information
Contact for activation
URL: https://activate.siriusradio.com/
Phone: l-888-539-SIRIUS (1-888-539-7474)
SIRIUS
,"
~'il~
Status messages are displayed on the front panel display during
the activation. For details, see "SIRIUS Satellite Radio™'' on
page 53. Once the activation is finished, "SUB UPDATED"
appears.
1
Rotate the INPUT selector on the front panel
(or press SIRIUS on the remote control) to
select SIRIUS as the input source.
The SIRIUS indicator lights up on the front panel
display and the SIRIUS Satellite Radio information
(such as channel number, channel name, category,
artist name, or song title) for the currently selected
channel is displayed on the front panel display.
SIRIUS
SPA
I
Channel number
I
Channel name
• When you select SIRIUS as the input source, this unit
automatically recalls the previously selected channel.
• You can change the SIRIUS Satellite Radio information that is
displayed by pressing FM MODEIINFO on the front panel (or
INFO on the remote control) (see page 34).
Notes
• If you have not activated your subscription yet, you can only
select" 184" or "ODD".
• If a status message or an error message is displayed on the front
panel display, see "SIRIUS Satellite Radio n, " (see page 53).
28
En
LISTENING TO SIRIUS Satellite Radio ™
,I,
~<i>~
2
Search for a channel by using one of the
SIRIUS Satellite Radio search modes.
• All channel search mode
Selects a channel from a list of all channels (see
page 29).
• Category search mode
Selects a channel by category (see page 29).
• Direct number access mode
Selects a channel directly by channel number (see
page 30).
• Preset search mode
Selects a channel from the preset channels (see
page 31).
You can register channels as presets and then easily
recall any preset channel by selecting its preset
number.
• You can search for a channel quickly by holding down
TUNING/CH«
on the front panel (or TUN.lCH ~ / ~ on
the remote control).
• You can skip to channels in the previous or next category by
pressing CATEGORY <l / l> on the front panel (or
CATEGORY <l / l> on the remote control).
/»
•
Category search mode
<<I»
TUNINGICH
CATEGORY <l / l>
,I,
~<i>~
• You can display SIRIUS Satellite Radio information on the
front panel display (see page 34).
• If you tune in to a channel that you do not subscribe to, "CALL
888-539-SIRIUS TO SUBSCRIBE" scrolls across the front
panel display, and then "CALL SIRIUS" is displayed.
• You can register SIRIUS Satellite Radio channels as presets
(see page 30).
•
TUNJCH ~/~
All channel search mode
CATEGORY <l / I> -H~*-'--'-"".'
1
Press CATEGORY <]1 c> on the front panel
(or CATEGORY <]1 c> on the remote control)
to select a channel category.
The CATEGORY indicator lights up in the front
panel display when selecting a category. When you
select a category, the first channel in the category is
selected.
SIRIUS
SPA
I
Category name
,I,
':-\t)":.
You can search for a channel category quickly by pressing and
holding CATEGORY <l / l> on the front panel (or CATEGORY
<l / l> on the front panel).
CATEGORY <l / l> ---;-,C"-:-~",,=,--J
1
Press TUNINGICH <<1>>on the front panel
(or TUN.lCH ~ 1 ~ on the remote control)
repeatedly to search for a channel from a list
of all channels.
Note
If no operations are performed for 10 seconds, the search mode
returns to the all channel search mode.
SIRIUS
SPA
·...1 .; 'j" .:::
1 1.1...' .....
"j
. Mcnn
JU.il
29
En
LISTENING TO SIRIUS Satellite Radio™
2
While the CATEGORY indicator on the front
>>
panel display is lit, press TUNING/CH
on the front panel (or TUN.lCH ~ I ~ on the
remote control) repeatedly to search for a
channel within the selected channel
category.
Regisleringrandrecalling.SJRIOS
Satellite Radio TM channels
«I
Up to 40 SIRIUS Satellite Radio channels can be
registered as preset channels.
•
--
• You can search for a channel quickly by pressing and holding
TUNING/CH«
on the front panel (or TUN.lCH ~ ~ on
the remote control).
• In the category search mode, you can only search for a channel
within the selected channel category.
I»
Registering preset channels
I
I
00
0 []
,6o~~I~rrf 0 ,0,
Note
PRESET<I>
This unit skips the following channels in all channel search mode
or category search mode. This is not a malfunction.
• channels that are locked (see page 32)
• channels that are not currently in service
• channels that you do not subscribe to
•
I
MEMORY
8~8@11
~ ~ (~'~ll- PRESET
000 05~
Direct number access mode
cq~t>
Numeric
buUons, ENTER
1
Press the numeric buttons on the remote
control to enter the desired three-digit
channel number.
For example, to enter the number 123, press the
numeric buttons "I," "2" and then "3".
m
Numeric
buUons
. lY .
CD CD CIl
CD CD CD .~.
"ot
CD CD -
m
:::~
,',
~<i>~
• To entering a one-digit or two-digit channel number, enter the
number using the numeric buttons and then press ENTER on
the remote control to confirm your entry.
• This unit automatically accepts your entry if you do not press
ENTER on the remote control within a few seconds after
entering the number.
• If the selected channel is locked, "PIN:_" is displayed on the
front panel display. Enter the 4-digit Parental Lock code
number by using the numeric buttons or press ENTER on the
remote control to cancel (see page 32).
• If the selected channel is not available, an advisory message
may be displayed. For details, refer to "SIRIUS Satellite
Radio™'' (see page 53).
• If this unit is in preset search mode, a preset number is selected
instead of a channel number when you press the numeric
buttons on the remote control. To switch to direct number
access mode. press TUNING/CH
on the front panel (or
TUN.lCH ~ I ~ on the remote cuntrol).
«I»
30
En
1
Search for a channel to be registered.
For details on searching channels, refer to the
following pages.
• All channel search mode (see page 29)
• Category search mode (see page 29)
• Direct number access mode (see page 30)
A
Iv
LISTENING TO SIRIUS Satellite Radio ™
•
2
Press MEMORY on the front panel.
The indicator on the front panel display changes as
follows.
Recalling a preset channel (Preset
Search mode)
You can recall preset channels by specifying their preset
numbers.
Currently registered channel number
(or "-" if empty)
SIRIUS
SP A
p
PRESET MEMOR'f
Ci ", :
.
I
Preset number to which new
channel number is registered
Channel number to be
registered
• By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically
register the selected channel to an empty preset number (i.e., the
preset number following the last preset number used).
• To cancel registration, press RETURN on the remote control or
do not perform any operations for about 30 seconds.
3
<>
Press PRESET I on the front panel (or
PRESET A. I v on the remote control) to
select preset number.
'"
~<i>~
• You can also select a preset number using the numeric buttons
on the remote control.
• If you select a preset number that is being used (i.e., if the
currently registered channel number is displayed next to the
preset number), the current preset will be overwritten.
4
SIRIUS
SPA
i...! .;
i i .i.
1
Press MEMORY on the front panel.
PRESET
':n ....
"j
1••- .:::'
I
<>
Press PRESET I on the front panel (or
PRESET A. I v on the remote control)
repeatedly to change the preset number
(1 to 40).
31
En
LISTENING TO SIRIUS Satellite Radio ™
•
Clearing a preset channel
Follow the steps below to clear a preset channel one at a
time.
--
I
I
00
[)
[)
D;;~~'il-ffi:0 0
Setting the Parental Lock
You can use the Parental Lock feature to limit access to
certain SIRIUS Satellite channels. This unit automatically
skips the locked channels when this unit is in the all
channel search mode or category search mode and you
search for a channel by pressing TUNING/CH <</
on
the front panel (or TUN.lCH ~ /:::::; on the remote
control).
>>
•
CLEAR
Setting the code number and lockingl
unlocking channels
Use this feature to set the Parental Lock code number
(PIN) and select the channels to be locked or unlocked.
OPTIONfi~~
RETURN
---~~,~~ GJ
<J/f>/6/\l
ENTER
I ..... ~ - '
.cn.'·
1
AI,
Select the desired preset.
See "Recalling a preset channel (Preset Search
mode)" on page 31.
2
Press CLEAR on the front panel.
The selected preset number flashes on the front panel
display.
·i......
I.." .:::'
rn
n1
•
.•
....lLJdB
,',
~<i>~
To cancel clearing the preset channel, press RETURN on the
remote control or leave this unit without any operations for
about 30 seconds.
3
Press CLEAR on the front panel to confirm.
"PXX: CLEARED" (XX indicates the preset
number) is displayed on the front panel display, and
then the display returns to its original state.
32
En
1
Press OPTION on the remote control.
The Option menu for SIRIUS is displayed.
2
Press 6. I \l on the remote control to select
"Parental Lock" l and then press ENTER.
LISTENING TO SIRIUS Satellite Radio ™
3
Use <lll> (to select a digit to edit) and f:, I \1
(to select a number) on the remote control to
enter the 4-digit code number.
6
• If the selected channel is locked, the channel
number and "LOCKED" are displayed on the front
panel display.
• If the selected channel is unlocked, the front panel
display changes from "LOCKED" to the channel
name.
• If you are entering a code number for the first time,
enter the desired code number.
• If you have entered a code number before, enter the
same code number.
SIRIUS
SPA
I:::: 'I' : :
: .I. r"!
........
:,": :.': I.': I.':
...
In
r:..= ::..:
.oo
...
,-,-,n
::••: ::..:
..
']LjJ'~
I I
The entered code number is needed for tuning in the
channel or unlocking the channel. Write it down below.
Code number:
_
You can also enter the code number using the numeric buttons on
the remote control.
4
:oo.:
' i
i ". i
I
r".:
ilO.:
;
. ~ ;~:j
j"'-i
f-r
U~.~ _
Press OPTION once or press RETURN
repeatedly on the remote control to exit the
"Parental Lock".
• If the last channel you selected was locked, the unit
tunes in to "184 Weather/Emergency" or "000
SIRIUS ID".
• If the last channel you selected was unlocked, the
unit tunes in to that channel.
If the code number was entered for the first time, a confirmation
message is displayed. Press ENTER again to confirm the code
number.
5
.:
I....
8
'"
• If a code number is already registered and you enter a different
number, "WRONG" is displayed and the display returns to step
3. Enter the correct code number.
• If you forget the Parental lock code or want to change it, reset it
using "SR PIN" (see page 43).
:'":: ;,.;: ":
=::.= :::.: i
Repeat steps 5 and 6 to lock or unlock other
channels as desired.
:Cj>-:'
Notes
s~
7
Press ENTER on the remote control.
The SIRIUS channel number and channel name are
displayed on the front panel display.
Press ENTER on the remote control to lock
or unlock the selected channel.
•
Tuning in to the locked channels
Tune in to the channel using direct number access mode
(see page 30) or preset search mode (see page 31). When
you tune in to a locked channel "LOCKED" is displayed
on the front panel display, followed by the following
message. Enter the Parental lock code set previously by
using the numeric buttons on the remote control. To cancel
this operation, press ENTER on the remote control.
Search for a channel to be locked or
unlocked.
Numeric
buttons,
ENTER
For details on searching channels, refer to the
following pages.
• All channel search mode (see page 29)
• Category search mode (see page 29)
.•
','i;'
,
~
Note
When searching for a channel, the sound of the selected channel
can be heard even if the channel is locked.
SIRIUS
SPA
Note
If the number you entered does not match the code number,
"WRONG" is displayed on the front panel display and this unit
tunes in to the previously selected channel.
33
En
LISTENING TO SIRIUS Satellite Radio ™
1
Use this feature to display the SIRIUS Satellite Radio
information on the front panel display.
Press FM MODEIINFO on the front panel (or
INFO on the remote control) repeatedly to
switch between the following SIRIUS Satellite
Radio information display modes.
Channel number, channel name
If a status message or an error message is displayed on the front
panel display, see "SIRIUS Satellite Radio™'' on page 53.
CRTE130F.:\'
Channel category
RPTIST.···SOt-i(J
Artist name, song title
COt'1PO~:EP
Composer name
Antenna reception level
t
Back to "CHRHt'~EL"
Display example (RtHEt·jt·jR)
SlAlUS
SPA
>"
~<il<'
• If the SIRIUS Satellite Radio information contains a character
that cannot be recognized by this unit, the character will be
displayed as a space.
• When the antenna of the SiriusConnect tuner cannot receive the
signals, "ACQUIRING" is displayed on the front panel display.
• When an information is unavailable, "--" is displayed.
• To hold or release the displayed information, press ENTER on
the remote control. While it is held, the "HOLD" indicator
flashes on the front panel display.
34
En
PLAYING BACK TUNES FROM YOUR iPhone/iPod/
Bluetooth™ COMPONENT
Once you have connected an optional Yamaha Universal Dock for iPod (such as the YDS-12), Wireless System for iPod
(YID-WlO), or Bluetooth Wireless Audio Receiver (YBA-lO) to the DOCK jack on the rear panel of this unit, you can
enjoy playback of your iPhone/iPod or Bluetooth component using the remote control supplied with this unit.
Such as the
YID-W10
YBA.10
~~~
~
v.doomD
f----------------
----.--Position
.. the connected
device as far as possible
from the unit.
TV
Universal Dock for iPod
Model
(As of July 2010)
Supported iPhone/iPod
(As of July 2010)
Remarks
Bluetooth Wireless Audio
Receiver
YID-WIO
YBA-IO
Only audio
Only audio
• Remote control
• Zone 2 Remote control
(R-S700 only)
• iPhone/iPod connected to the
dock
• iPhoneliPod connected to the
YID-WI 0 transmitter
• Remote control
• Zone 2 Remote control
(R-S700 only)
Bluetooth components
• iPod touch
• iPod (4th Gen/
5th Gen/
classic)
• iPod nano
• iPod touch
• iPod (5th Gen/
classic)
• iPod nano
• YDS-12
• YDS-II
• YDS-IO
This unit can play back Audio and video
Operated by
Wireless System for iPod
•
•
•
•
iPod mini
iPhone
iPhone 3G
iPhone 3GS
• Only the R-S700 supports video
output.
• The YDS-l 0 does not support
video playback.
• iPhone/iPod charging also
supported.
• The YDS-I OIYDS-Il does not
support iPhone connectioll.
• iPhone
• iPhone 3G
• iPhone 3GS
iPhone/iPod charging also
supported.
~
CAUTION
To prevent accidents, unplug the power cable of this unit before connecting a Universal Dock for iPod, a Wireless
System for iPod or a Bluetooth Wireless Audio Receiver.
Note
If the iPhone connected to the YI D-WI 0 receives a call while this unit is in standby mode, the unit tums on automatically and the
ringtone is heard through this unit. If you do not want this unit to tum on when a call is received, set the iPhone to silent mode.
35
En
PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
•
Controlling your iPhone/iPod
After setting your iPhone/iPod in your dock, rotate the INPUT selector on the front panel (or press DOCK on the remote
control) to select DOCK as the input source to play your iPhone/iPod.
CD
,"'CD
OCllDcmCaD'
'~'• •
DOCK
,.·~ts\.~
.',",I,·iR~.~~'1
I
.
'\"
~~O·
MENU! oDD II<J<J II»<
.11
ENTER
MENUlI>DD 11<J<l/!>t>l
ENTER
While viewing the information displayed on your iPhone/iPod, use the following remote control buttons to operate
(playback, pause, skip, etc.) your iPhone/iPod.
Remote control
Zone 2 remote control
(R·S700 only)
MENU
MENU
Displays the menu.
ENTER
ENTER
• If an item is selected: Confirms the item and displays the next screen.
• If a song is selected: Plays the selected song.
t:>.
It'
Scroll up.
\!
"lilt.
Scroll down.
[>[][]
[>[][]
t>t>l
t>t>l
• Ifa song is playing or paused: Skips to the beginning of the next song.
• If pressed and held: Searches forward.
I<J<l
I<J<l
• If a song is playing or paused: Skips to the beginning of the current song.
• Pressing repeatedly skips one song backwards with each press.
• If pressed and held: Searches backward.
:::::c: *
0*
INFO*
N~ies
----------------
~
Operation
• If a song is playing: Pauses the song.
• If a song is paused: Plays the song.
Switches between shuffle modes (Off -7 Songs
-7
Switches between repeat modes (Off -7 One
All
-7
Albums
-7
-7
Of/).
Of/).
Switches between items displayed on the front panel display of this unit (Song
number and elapsed time -7 Songs -7 Artists -7 Albums -7 Song number and
elapsed time).
• "*,, indicates buttons that can be used to control the Main zone only,
• Some shuffle modes and repeat modes may not be available depending on the model or the software version of your iPhone/iPod.
,"
~<i>~
When this unit is turned on or is in standby mode, your iPhone/iPod can be charged automatically if it is connected to a Universal Dock
for iPod. The MAIN ZONE indicator remains brightly lit when an iPhone/iPod is being charged.
•
Playing videos from your iPhone/iPod (R-S700 only)
Ifa video monitor, such as a TV, is connected to this unit's iPod VIDEO jack using a composite video cable, you can use
the video monitor to watch videos stored on or streamed from your iPhone/iPod.
fNene'
;.
iPhone/iPod operation screens are not displayed on the video monitor.
36
En
PLA YING BACK TUNES FROM YOUR iPhoneliPodlBluetooth 1M COMPONENT
•
By connecting a Wireless System for iPod to this unit, you
can play songs on your iPhone/iPod and listen to them
using a wireless connection.
You can use the remote control to control the iPhoneliPod. For
more information, see page 36.
Note
When playing an iPhoneliPod using a Wireless System for iPod,
playback information is not displayed on the front panel display.
-'I
L-
o
0 0
0000000000
00000
YID-Wl0
transmitter
•
0
0
0 D .D 0 0
-)~
~
---~
YID-W10 receiver
Establishing a wireless connection
Once the iPhoneliPod is connected to the YID-W 10
transmitter and playback begins, it takes about 5 seconds
for audio to be heard. During this time the wireless
connection between the YID-WI 0 transmitter and
receiver is established.
The status of the wireless connection between the
YID-WIO transmitter and receiver is indicated by the
respective indicator.
Status of
Connection
YID-W10
transmitter
indicator
YID-W10
receiver
indicator
No connection
OfT
OfT
Confirming
connection
Green, flashing
Blue, flashing
Connected
Green, lit
Blue, lit
Controlling this unit with your iPhonel
iPod
• When playback begins on an iPhone/iPod that is
connected to a YID-W J 0 transmitter, and if the
YID- W J 0 transmitter is within range of the YID-WI 0
receiver, this unit performs as follows:
- If this unit is already turned on when playback
begins: The input source switches to DOCK.
- If this unit is in standby mode when playback
begins: This unit turns on and the input source
switches to DOCK.
• In the following situations, the wireless connection
between the transmitter and receiver is disconnected.
After 30 seconds this unit automatically enters standby
mode.
- The iPhone/iPod is not operated for about 30-120
seconds after the playback is paused.
- The sleep timer of the iPhone/iPod is activated.
- The iPhoneliPod is disconnected from the
YID-WI 0 transmitter.
- The iPhone/iPod battery level decreases to a level
where it cannot provide enough power to the
YID-W10 transmitter.
The YID-WIO transmitter is moved outside of the
wireless communication range of the YID-WIO
receiver.
- Communication between the YID-WIO transmitter
and receiver becomes disrupted due to interference
from other wireless LAN devices, cordless
telephones, microwave ovens, etc.
These features can be disabled by setting "Interlock" to "OFF" in
the Option menu (see page 42).
• Adjusting the volume on the iPhone/iPod also adjusts
the volume of this unit. The iPhone/iPod can increase
the volume to up to 0 dB (or the value set for the
"MaxVol" setting in the Option menu). To further
increase the volume, adjust the volume using this unit's
VOLUME control or the remote control.
,',
~<il~
• When this unit is turned on or is in standby mode, your iPhonel
iPod can be charged automatically if the YID- WI 0 transmitter
connected to your iPhone/iPod is stationed in the YID-WI 0
receiver. The MAIN ZONE indicator remains brightly lit when
an iPhoneliPod is being charged.
• Refer to the operating instructions of the YID- WI 0 for more
information.
Note
When the iPhone/iPod is used in Zone 2, these features are not
available.
37
En
PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT
4
~ot~
Press Do I \l on the remote control to select
"Pairing", and then press ENTER.
"Searching..." is displayed and pairing begins.
DOCK
SPA
I-nn
This unit supports A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio and Video Remote Control Profile) of the
Bluetooth profile.
-']UJ~
,',
•
Pairing Bluetooth™ components
INPUT selector
~"'~
To cancel pairing, press RETURN on the remote control.
5
Make sure the Bluetooth component
recognizes the Bluetooth Wireless Audio
Receiver.
When the component is recognized, it will be
displayed in the Bluetooth component list, for
example as "YBA-IO YAMAHA".
6
Select the Bluetooth Wireless Audio
Receiver from the Bluetooth component list,
and enter a pass key "0000" using the
Bluetooth component.
When pairing is complete, "Completed" is displayed
on the front panel display.
To exit the Option menu, press OPTION on the
remote control.
DOCK
SPA
,-
:
••••••
: ....
: . .1
1
r"
:".". :"".
! II
I:.
:.:••••••••••
:i••••• ,•• • • • • ,•••••••:i.
,-, ,._,
- !=dJJ-~
'"
~"'~
Be sure to pair the Bluetooth Wireless Audio Receiver and
the Bluetooth component when connecting for the first
time or when settings have been deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
Not~C
The Bluetooth Wireless Audio Receiver can be paired with up to
eight Bluetooth components. When the ninth device is paired, the
pairing settings for the device which has not been used for the
longest period of time will be deleted.
1
Rotate the INPUT selector on the front panel
(or press DOCK on the remote control) to
select DOCK as the input source.
2
Turn on the Bluetooth component you want
to pair and set it to pairing mode.
3
Press OPTION on the remote control.
The Option menu for DOCK displayed (see page 40).
38
En
When the input source is set to DOCK, you can also begin pairing
by pressing and holding MEMORY on the front panel (or
ENTER on the remote control).
PLA YfNG BACK TUNES FROM YOUR iPhone/iPod/Bfuetooth ™ COMPONENT
•
Playing back Bluetooth TM components
jj i!
3
I
'"
I
0 D
ij- 0
~ "ir-,-,-,~:-,- ,-,·.~-,- •,.~-,-,-~-,- ,-,l_,- -", , -, , , -;,- '
Press D. I v on the remote control to select
"Connect", and then press ENTER.
When wireless connection is complete, "Connected"
is displayed on the front panel display.
To exit the Option menu, press OPTION on the
remote control.
DOCK
MEMORY
SPA
INPUT selector
f'" ."", : :
t.... :•••
=: :: : ::::" :
oi"
."11
;
t... ::::" t :
Note
"Not found" is displayed if there is a connection error. Check that
the following conditions have been satisfied, and try to establish a
wireless connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 32 feetllO meters of the
Bluetooth wireless audio receiver.
4
When pairing is complete, carry out the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component.
When the wireless connection is complete, you can enjoy
playback from B1uetooth components.
Operate the Bluetooth component for
playback.
While the Bluetooth component is playing,
"BLUETOOTH" is displayed on the front panel
display.
DOCK
SPA
f- i-l
Depending on the Bluetooth component, a wireless connection is
established automatically or when the Bluetooth component is
operated. In these cases, it is not necessary to carry out the
following procedure.
n
_. ']U~i
Note
Note·
To disconnect a wireless connection, repeat these steps and select
"Disconnect" in step 3.
,',
1
Rotate the INPUT selector on the front panel
(or press DOCK on the remote control) to
select DOCK as the input source.
2
Press OPTION on the remote control.
The Option menu for DOCK displayed (see page 40).
~"'~
When the input source is set to DOCK, you can also establish a
wireless connection by pressing MEMORY on the front panel (or
ENTER on the remote control).
39
En
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
The Option menu allows you to configure various settings for each input source and recall those settings automatically
when an input source is selected. Also, you can view the signal information for certain input sources.
The procedure for setting the Option menu items is described below.
5
To exit the Option menu, press OPTION on
the remote control.
To return to the previous menu, press RETURN on
the remote control.
Note
INPUT selector
Input selector
buttons
If 6. / v / <J / l> on the remote control or other buttons do not
work after closing the Option menu, rotate the INPUT selector on
the front panel (or press one of the input selector buttons on the
remote control) to select the current input source again.
Option/nenu'items
The following menu items are provided for each input
source.
Input source
1
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
Press OPTION on the remote control.
Note
If the input source is changed while the Option menu is displayed,
the front panel display exits the Option menu and the display for
the selected input source is displayed.
3
Press f:::,. / \1 on the remote control to select
the desired menu item, and then press
ENTER.
4
Press f:::,. / \1 / <1/1> on the remote control to
change the settings.
For cert.ain menu items, you must press ENTER to save the new
setting.
40
En
Menu items
PHONO, CD, TAPE 1,
LINE 1-3
Volume, Zone2 Volume'l, Trigger
Out'l
TUNER
Volume, Zone2 Volume'l, Trigger
Out'l, FM Mode, Auto Preset, Clr
All Preset
SIRIUS
Volume, Zone2 Volume'l, Trigger
Out'l, Parental Lock
DOCK (iPhoneliPod)
Volume, Zone2 Volume'l, Trigger
Out'l, Interlock'2
DOCK (Bluetooth)
Volume, Zone2 Volume'l, Trigger
Out'j, Connect, Disconnect, Pairing
Notes
"Zone2 Volume" and "Trigger Out" are available on the R-S700
only.
'2 "Interlock" is displayed in the Option menu only when using a
Wireless System for iPod.
'I
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Details of the menu items are as follows. The
configuration will be reflected to the input source
currently selected.
,',
~<il-:'
The default settings are marked with "*".
Volume
Submenus:
Adjustable range
(MaxVol):
Adjustable range
(IniVol):
If"MaxVol" is set to a value lower than the "[niVor' setting. the
setting for "Max Vol" overrides the "IniVol" setting. For
example, if you set "MaxVol" to "-3D.DdB" and "lniVol" to
"D.DdB", the volume is automatically set to ·'-3D.DdB" the next
time this unit is turned on.
MaxVol,lniVol
Trigger Out (R-S700 only)
-30.0dB
to
+ 15.0dB, + 16.5dB* (5.0 dB step)
Otf*, Mute, -89.5dB to +16.5dB (0.5 dB step)
Sets items for volumes.
MaxVol (Maximum volume)
Sets the maximum volume level so that the volume will not
be accidentally increased above a certain level. For
example, you can adjust the volume between -89.5 dB and
-5.0 dB (or Mute) when you set this parameterto "-5.0dB".
The volume can be increased to the maximum level when
this parameter is set to + 16.5 dB (default).
IniVol (Initial volume)
Sets the volume at the time this unit is turned on. When
this parameter is set to "Off', the volume level used when
this unit was set to standby is applied.
If"MaxVol" is set to a value lower than the "lniVol" setting, the
setting for "MaxVol" overrides the "IniVol" setting. For
example, if you set "MaxVol" to "-3D.DdB" and "lniVol" to
"D.DdB", the volume is automatically set to "-3D.DdB" the next
time this unit is turned on.
Zone2 Volume (R-S700 only)
Submenus:
Adjustable range
(MaxVol):
Adjustable range
(IniVal):
Note
MaxVol,IniVol
Submenu:
Choices:
Mode
Power*, Source, Manual
Use this feature to select the functions of the TRIGGER
OUT jack of this unit.
Power
Select this setting to send the voltage signals while the
selected zone is turned on.
Source
Select this setting to send the voltage signals while the
input source is selected.
Manual
Select this setting to send the voltage signals manually.
Noie
The settings that are available depend on the mode (Power,
Source, or Manual) that is selected.
Power: Zone
Source: Zone and Output level for each input source
Manual: Manual test
Zone
Choices:
AII*, Main, Zone 2
Select the zone to apply the setting you selected in
"Mode".
-30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Otf*, Mute, -89.5dB to +16.5dB (0.5 dB step)
Sets the maximum volume level and initial volume level
of Zone 2.
MaxVol (Maximum volume)
Sets the maximum volume level for Zone 2. Refer to
"MaxVol (Maximum volume)" above.
IniVol (Initial volume)
Sets the volume at the time Zone 2 is turned on. Refer to
"IniVol (Initial volume)" above.
All
The "Mode" setting is applied to the Main zone and
Zone 2.
Main
The "Mode" setting is applied to the Main zone only.
Zone 2
The "Mode" setting is applied to Zone 2 only.
'"
~<il-:'
The "ZONE 2" indicator on the front panel display flashes when
the Zone2 volume is adjusted.
41
En
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Output level for each input source
Interlock
Choices:
Choices:
High·, Low
Select the function of the TRIGGER OUT jack when
the corresponding input source is selected.
High
Send the voltage signals when you select the input
source you set in "Source".
Low
Stop sending the voltage signals when you select the
input source you set in "Source".
When an iPhoneliPod is connected to this unit wirelessly
using a Wireless System for iPod, the iPhone/iPod can be
used to tum this unit on, set it to standby mode or select
DOCK as the input source.
"Interlock" is displayed in the Option menu only when
using a Wireless System for iPod and DOCK is selected as
the input source.
ON
OFF
Manual test (Manual)
Choices:
High·, Low
Confirm that the component connected to the
TRIGGER OUT jack operates when voltage signals
are sent to the component. This setting is available
only when "Mode" is set to "Manual".
High
Send the voltage signals.
Low
Stop sending the voltage signals.
FM Mode
Choices:
STEREO·, MONO
Sets the FM broadcast receiving mode.
"FM Mode" is displayed in the Option menu only when
TUNER is selected as the input source.
STEREO Receives in automatic stereo mode by priority.
MONO Receives in monaural mode. You can get a
better reception in monaural mode.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (see page 22).
"Auto Preset" is displayed in the Option menu only when
TUNER is selected as the input source.
Clr All Preset
Clears all preset stations (see page 25).
"Clr All Preset" is displayed in the Option menu only
when TUNER is selected as the input source.
Parental Lock
Sets the Parental Lock (see page 32).
"Parental Lock" is displayed in the Option menu only
when SIRIUS is selected as the input source.
42
En
ON·, OFF
This unit responds to certain iPhone/iPod
operations.
Disables this feature.
Connect/Disconnect
Connects to or disconnects from a Bluetooth component
(see page 39).
"Connect/Disconnect" is displayed in the Option menu
only when DOCK (Bluetooth) is selected as the input
source.
Pairing
Pairs the Bluetooth Wireless Audio Receiver and a
Bluetooth component (see page 38).
"Pairing" is displayed in the Option menu only when
DOCK (Bluetooth) is selected as the input source.
ADVANCED SETUP
•
ADVANCED SETUP menu parameters
Chal1,f".thilADVANCEQ,sttup -
Change the initial settings to reflect the needs of your
listening environment.
metiii,iram,tei'S:. '." •
c. ", ,".
-
,0,
"",.
'F
.-.
-
,
';,'
.•
~<i>~
The default settings are marked with "*".
REMOTE 10
Choices: IDl, ID2*
Changes the remote control ID of this unit.
• Select ID I to operate this unit using an alternative
code.
• Select ID2 to operate this unit using the default code.
The ADVANCED SETUP menu is displayed in the front
panel display.
,0,
~<i>~
• Audio output is muted while setting parameters in the
ADVANCED SETUP menu.
• While setting parameters in the ADVANCED SETUP menu,
most controls on the front panel are disabled; only MAIN
ZONE 6, the INPUT selector and FM MODE/INFO are
operational.
The remote control's ID (see page 44) must be set to the same ID
as this unit.
SR PIN (SIRIUS Personal Identification Number)
Choices: CANCEL*, RESET
Resets the Parental Lock code used to lock/unlock
SIRIUS satellite radio channels.
MAIN ZONE(')
APD (Automatic Power Down) TIMER
Choices: 4H (4 hours), 8H* (8 hours), 12H (12 hours)
When the POWER MANAGEMENT switch on the rear
panel of this unit (see page 7) is set to ON, this unit's Main
zone and Zone 2 automatically enters standby mode if this
unit is not operated for the specified amount of time.
Note
If"YES" is selected the parameters are reset the next time you
tum on the power of this unit.
INPUT selector
1
Press and hold FM MODEIINFO on the front
panel, and then press MAIN ZONE c!.J.
This unit turns on, and the ADVANCED SETUP
menu is displayed on the front panel display.
2
Rotate the INPUT selector on the front panel
to select the parameter you want to change.
See "ADVANCED SETUP menu parameters" on
page 43 for a complete list of available parameters.
3
Press FM MODE/INFO on the front panel
repeatedly to change the selected parameter
setting.
To change other settings, repeat steps 2 and 3.
4
Press MAIN ZONE c!.J to set this unit to
standby mode to confirm your setting.
When the POWER MANAGEMENT switch is set to OFF, "APD
TIMER -OFF" is displayed.
INITIALIZE
Choices: NO*, YES
Resets all parameters to their factory presets.
• Select NO to cancel without resetting all parameters to
their factory presets.
• Select YES to reset all parameters to their factory
presets.
FM MODE/INFO
Note
The settings you made take effect the next time you tum on this
unit.
43
En
ADVANCED SETUP
When using multiple Yamaha receivers or amplifiers with
the same default code setting, you may unintentionally
operate those components simultaneously. In this case, set
one of the alternative codes for this unit to operate this
unit separately.
. '.
m" .'
r;
10
• Switching to ID I
Press and hold the ID button and the numeric button
"I" on the remote control together for about 3 seconds.
• Switching to ID2
Press and hold the ID button and the numeric button
"2" on the remote control together for about 3 seconds.
Remote control 10*
(this unit's setting)
Function
101
To operate this unit using
an alternative code.
102
(default setting)
To operate this unit using
the default code.
• When you change the remote control 10, you must
change the remote control 10 of this unit (see page 43).
Note
If the remote control batteries are weak or removed, the remote
control 10 will switch to the default setting (102). In this case,
replace the batteries and set the remote control 10 again.
44
En
ZONE 2
Connecting Zone 2 components
This unit allows you to configure a multi-room audio system. The Zone 2 feature enables you to set this unit to reproduce
separate input sources in the main room and in Zone 2 (the second room) simultaneously. You can control this unit from
the second room using the supplied remote control.
The R-S700 can also be operated using the supplied Zone 2 remote control.
You need the following additional equipment to use the multi-room system of this unit:
o
An infrared signal receiver for the second room.
o
An infrared emitter for the main room. This emitter transmits the infrared signals sent by the remote control in Zone 2
to the components in the main room.
o
An amplifier and speakers for the second room.
,0,
~<il~
Some Yamaha models are able to connect directly to the REMOTE OUT jack on the rear panel of this unit. If you own one of these
products, you may not need to use an infrared emitter. Up to six Yamaha components can be connected as shown below.
REMOTE
REMOTE
REMOTE
0---- --- -- _!~ ..I ·Ir-::°....::;.UT-'-----'-'-IN••'
-.:::==----,==
""==-~-""'=='
Infrared signal
receiver
•
This unit
REMOTE
I....::;.O~UT'--_I_N••
f ~lJ!__ ---- ..
-.:::==----.::==-"
1
Yamaha component
Yamaha component
Multi-room configuration and connections
The following illustration shows an example of a multi-room system configuration and connections.
ZONE 2 OUT
f SPEAKER
(
~.~!
Q
CD changer
(or other components)
This unit
Zone 2 C=:J) ) ))
Remote control ~
(R-S700 only) Infrared signal
receiver
I
y
'
'--
l,,
SPEAKER
Amplifier
LINE
..---..
f
Q
:,--_._._----~
Infrared emitter
':
~~~~_:~~~_(_~~i_~_~~_~~~
REMOTE OUT
,
I
: L,--_s_ec_o_n_d_ro_o_m--,-cz_o_n_e_2:...>---,
REMOTE IN
,0,
~<il~
Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with
your nearest authorized Yamaha dealer or service center for the Zone 2 connections that best meet your requirements.
Note
If you want to adjust the Zone 2 volume level by using the amplifier in the second room, we recommend setting the Zone 2 volume level
to or near 2.5 dB.
45
En
ZONE 2
•
Use the supplied remote control, Zone 2 remote control
(R-S700 only) or front panel to control the input source or
adjust the sound output level of Zone 2 independently of
the listening conditions in the main room.
Using the remote control
~~~;:::;;=::f~1
'="='~~~7-2
MAIN!
ZONE 2
• Sound output level can be adjusted on the R-S700 only.
Note'
When using the R-S500, follow the procedure described in
"Using the remote control" and "Using the front panel".
•
Using the Zone 2 remote control (R-S700
only)
1
Change the zone that is operated by the
remote control.
• To control the Main zone
Press and hold the MAIN/ZONE 2 button and the
numeric button I on the remote control together for
about 3 seconds.
• To control Zone 2
Press and hold the MAIN/ZONE 2 button and the
numeric button 2 on the remote control together for
about 3 seconds.
I (Zone 2 on)
2
Use the remote control as desired.
For information about the buttons that can be used to
control Zone 2, see "Remote control" on page 8.
Buttons that can be used to control Zone 2 are
indicated by "fEmI" on page 8.
1
2
Press I (Zone 2 on) on the Zone 2 remote
control to turn on Zone 2.
•
Using the front panel
Use the Zone 2 remote control as desired.
For information about each of the buttons on the
Zone 2 remote control, see "Zone 2 remote control
(R-S700 only)" on page 10.
ZONE 2 CONTROL
ZONE 2
1
Press ZONE 2 on the front panel to turn on
Zone 2.
2
Press ZONE 2 CONTROL on the front panel
to control Zone 2.
The ZONE 2 indicator on the front panel display
blinks for about I0 seconds. During this time, you
can control Zone 2 from the front panel.
For information about the buttons and controls that
can be used to control Zone 2, see "Front panel" on
page 4. Buttons and controls that can be used to
control Zone 2 are indicated by "fEmI " on page 4.
46
En
REMOTE CONTROL FEATURES
The remote control can be used to control not only this unit, but also seven other audio-visual components (TV, DVD
player, VCR, etc.) made by Yamaha and other manufacturers. To control other components with this unit's remote
control, you must first configure the remote control to control each component (see page 49).
.
-
Controlling IhisiJnil,-a T~(Jr;Dlh8rcompo.neiJI$
•
•
Controlling this unit
,.,., . '.
-~,
10 I ! !
Controlling a TV
To use this unit's remote control to control your TV,
determine the remote control code that corresponds to
your TV and assign that code to the TV 0 button or to
another input selector button on the remote control. For
details about assigning remote control codes, see page 49.
:ffj
(u.)
*1
*1 -
*1
*2
These buttons always control this unit.
These buttons control this unit only when OPTION is pressed.
*' These buttons control your TV if your TV's remote control
*2
code has been assigned to an input selector button.
These buttons (described below) control your TV if your TV's
remote control code has been assigned to the TV C; button or to
an input selector button.
TV CJ
Turns the TV on and off.
TV CH+/-
Changes the TV's channel.
TV VOL +/-
Adjusts the TV's volume.
TV INPUT
Changes the TV's input source.
MUTE
Mutes the TV's audio output.
47
En
REMOTE CONTROL FEA TURES
NoteS'
• When using only one TV: Assign the TV's remote control code
to the TV 6 button. The TV control buttons always control your
TV, regardless of the selected input source.
• To use other buttons (* 1, above) to control your TV: Assign the
TV's remote control code to the TV 6 bUllon, and also to an
input selector button. The TV control buttons always control
your TV, regardless of the selected input source. You can use
the other buttons to operate the TV by first pressing the input
selector bullon to which the TV is assigned.
• To control more than one TV: Assign one TV to the TV 6
bullon and the other TVs to other input selector buttons. You
can control the other TVs assigned by first pressing the input
selector button to which a TV is assigned. You can use the TV
control buttons to control the first TV whenever an input
selector bullon with no TV assigned to it is selected.
•
Controlling other components
To use this unit's remote control to control other
components (DVD player, VCR, etc.), determine the
remote control code that corresponds to the component
and assign that code to the desired input selector button on
the remote control. For details about assigning remote
control codes, see page 49.
To switch the input source and control the corresponding
component, press the input selector button on the remote
control, and then press the desired control button.
If you are unable to operate this unit after using the remote
control to operate an external component, press RECEIVER and
then try operating the remote control again.
[6]
48
En
The following table is an example of the component
features that may be controlled using this remote control.
Note that some features of the corresponding component
may not be supported, and that some buttons may not
correctly control the selected component.
SOURCEeJ
Power
TOP MENU
Title
t::.
Up
\1
Down
<l
Left
~
Right
ENTER
Enter
[4] RETURN
Return
[5] DISC SKIPIREC
Disc skip (player)
Rec (recorder)
C>
Play
<}<]
Search backward
1>1>
Search forward
ml/AIB
Pause (player, recorder)
Deck AlB (tape deck)
I<J<lIDIR A
Skip backward (player, recorder)
Direction A (tape deck)
l>l>lIDIR B
Skip forward (player, recorder)
Direction B (tape deck)
0
[6] 1-9,0, +10
Stop
Numeric buttons
[7] MENU
Menu
[8] DISPLAY
Display
[9] ENTER
TitlelIndex
REMOTE CONTROL FEA TURES
To use this unit's remote control to control other
components (TV, DVD player, VCR, etc.), determine the
remote control code that corresponds to the component
and assign that code to the desired input selector button on
the remote control. Remote control codes are listed in the
"LIST OF REMOTE CONTROL CODES" at the end of
this manual.
Input selector
buttons
•
Assigning remote control codes
1
Refer to the "LIST OF REMOTE CONTROL
CODES" at the end of this manual and
determine the remote control code that
corresponds to each of your components.
Components are listed by category (TV, VCR, DVD
player, etc.) and manufacturer.
2
Press and hold CODE SET on the remote
control for more than 3 seconds.
3
Press an input selector button on the remote
control to select the input source you want to
configure.
You can also press TV C) to configure the TV control
buttons (see page 47).
OPTION
4
TVc!:J
Numeric
.~.:..,-;-,.;-- buttons
,;-+...,.-...,.-...,.-;:-:-:;-';'-
•
When the component has been assigned, "OK" is
displayed on the front panel display. If an error
occurs, "NG" is displayed.
CODE SET
Default remote control configuration
The remote control is configured at the factory as shown
below.
• If the manufacturer of your component has more than one
remote control code, assign each code one at a time until you
find the code that successfully controls your component.
• You can only assign one remote control code to each input
selector button.
•
CD
CD player
Yamaha
5082
TAPE
TAPE deck
Yamaha
5087
Use the numeric buttons on the remote
control to enter the four-digit remote control
code corresponding to the component you
want to assign.
Resetting the remote control
Use this procedure to reset the remote control codes
assigned to each input selector to the factory default (see
"Default remote control configuration" above).
Note
PHONO
LINEl
CD recorder
Yamaha
5083
LINE 2
DVD player
Yamaha
2082
LINE 3
Blu-ray disc
player
Yamaha
2064
TVc!:J
Note
If you cannot operate a Yamaha component when the remote
control is configured using the remote control code listed above,
refer to the "LIST OF REMOTE CONTROL CODES" at the end
of manual and try assigning a different Yamaha remote control
code.
This procedure will be cancelled if you do not press any buttons
for I minute. If the procedure is cancelled, repeat from step I if
necessary.
1
Press and hold CODE SET on the remote
control for more than 3 seconds.
2
Press OPTION on the remote control.
3
Use the numeric buttons on the remote
control to enter "9981".
The remote control code assigned to each input
selector button will be reset to its factory default
code.
49
En
,
TROUBLESHOOTING
Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or
if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and contact the nearest
authorized Yamaha dealer or service center.
•
General
Problem
This unit fails to turn
on.
No sound
The sound suddenly
goes off.
Only the speaker on
one side can be
heard.
There is a lack of bass
and no ambience.
50
En
Cause
Remedy
See
page
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly.
The impedance setting is incorrect.
Set the impedance to match your speakers.
13
The protection circuitry has been activated
because of a short circuit, etc.
Check that the speaker wires are not touching each
other and then tum the power of this unit back on.
12
The IMPEDANCE SELECTOR switch on
the rear panel is not set to either end.
Set the IMPEDANCE SELECTOR switch to either
end when the power of this unit is turned off.
13
This unit has been exposed to a strong
external electric shock (such as lightning
or strong static electricity).
Set this unit to standby mode, disconnect the power
cable, plug it back in after 30 seconds, then use it
normally.
-
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
12
No appropriate input source has been
selected.
Select an appropriate input source with the INPUT
selector on the front panel (or one of the input
selector buttons on the remote control).
16
The SPEAKERS AlB switches are not set
properly.
Tum on the corresponding SPEAKERS A or
SPEAKERS B.
16
Speaker connections are not secure.
Secure the connections.
12
Output has been muted.
Tum off the mute.
8
The MaxVol or IniVol setting is set too
low.
Set the setting to a higher value.
The component corresponding to the
selected input source is turned off or is not
playing.
Tum the component on and make sure it is playing.
The protection circuitry has been activated
because of a short circuit, etc.
Check that the IMPEDANCE SELECTOR switch is
set to the correct position.
13
Check that the speaker wires are not touching each
other and then tum the power of this unit back on.
12
This unit has become too hot.
Make sure the openings on the top panel are not
blocked.
-
The automatic power down function has
turned this unit off.
Change the automatic power down setting ("APD
TIMER" in the Advanced Setup menu) to a longer
setting, or disable the automatic power down function
by setting the POWER MANAGEMENT switch on
the rear panel to OFF.
43
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
12
Incorrect setting for the BALANCE
control.
Set the BALANCE control to the appropriate
position.
18
The + and - wires are connected in
reverse at the amplifier or the speakers.
Connect the speaker wires to the correct + and phase.
12
-
40
-
TROUBLESHOOTING
Problem
A "humming" sound
can be heard.
Cause
Remedy
See
page
Incorrect cable connections.
Connect the audio plugs firmly. (fthe problem
persists. the cables may be defective.
12
No connection from the turntable to the
GND tenninal.
Make the GND connection between the turntable and
this unit.
12
The volume level is
low while playing a
record.
The record is being played on a turntable
with an MC cartridge.
The turntable should be connected to this unit through
the MC head amplifier.
The volume level
cannot be increased,
or the sound is
distorted.
The component connected to the TAPE
REC or LINE I RIC output jacks of this
unit is turned off.
Turn on the power of the component.
The sound is
degraded when
listening with the
headphones
connected to the CD
player or the tape
deck connected to
this unit.
The power of this unit is turned off, or this
unit is set to standby mode.
Turn on the power of this unit.
The sound level is
low.
The loudness control function is
operating.
Tum down the volume, set the LOUDNESS control
to the FLAT position, and then adjust the volume
again.
The input source
cannot be changed
although the INPUT
selector is rotated.
The CD DIRECT AMP switch is turned
on (R-S700 only).
Turn off the CD DIRECT AMP switch.
Using the BASS,
TREBLE,BALANCE
and LOUDNESS
controls does not
affect the tonal
quality.
The CD DIRECT AMP (R-S700 only) or
the PURE DIRECT switch is turned on.
The CD DIRECT AMP or the PURE DIRECT switch
must be turned off to use those controls.
-
-
16
18
17
17
51
En
TROUBLESHOOTING
•
Tuner
Problem
FM stereo
reception is
noisy.
FM
Cause
Remedy
The particular characteristics of the FM
stereo broadcasts being received may
cause this problem when the transmitter is
too far away or the antenna input is poor.
Check the antenna connections.
Try using a high-quality directional FM antenna.
14
Switch to monaural mode.
2l
There is
distortion, and
clear reception
cannot be
obtained even
with a good FM
antenna.
There is multipath interference.
Adjust the antenna position to eliminate the multipath
interference.
The desired
station cannot
The signal is too weak.
-
Try using the manual tuning method.
be tuned in
AM
52
En
14
Try using a high-quality directional FM antenna.
with the
automatic
tuning method.
FMI
AM
See
page
2l
NO PRESETS
is displayed.
No preset stations are registered.
Register stations you want to listen to as preset
stations before operation.
WRONG
STATION is
displayed.
An invalid FM/AM frequency has been
input.
Input a frequency that can be received.
The desired
station cannot
be tuned in
with the
automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections and orient
it for the best reception.
Automatic
station preset
does not work.
Automatic station preset is not available
for AM stations.
Use manual station preset.
There are
continuous
crackling and
hissing noises.
The noises may result from lightning,
fluorescent lamps, motors, thermostats or
other electrical equipment.
Try using an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
There are
buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV set.
22
21
-
Try using the manual tuning method.
21
23
-
-
TROUBLESHOOTING
•
SIRIUS Satellite Radio™
The following messages may be displayed on the front panel display in certain situations.
Message
Status/Cause
Remedy
See
page
ANTENNA ERROR
The antenna is not connected to the
SiriusConnect tuner properly.
Check the connection of the antenna and
SiriusConnect tuner.
27
SIRIUS LOADING
This unit is communicating with the
SiriusConnecttuner.
The message disappears normally within several tens
of seconds.
-
CHECK SR TUNER
The SiriusConnect tuner is not connected
to the SIRIUS jack of this unit correctly.
Check the connection of the SiriusConnect tuner and
this unit.
27
The SiriusConnect tuner is not connected
to the AC wall outlet.
Connect the power cable of the SiriusConnect tuner
to the AC wall outlet.
-
NOT SUPPORTED
This unit does not support the connected
SIRIUS Satellite Radio tuner.
Connect the SiriusConnect tuner that this unit
supports,
-
ACQUIRING
The signal is too weak.
Adjust the orientation of the antenna of the
SiriusConnect tuner. Check the antenna reception
level from the Antenna information on the front
panel display.
34
UPDATING
The SiriusConnect tuner is updating the
channel list.
Wait until the updating is complete.
The period of the subscription is end.
Contact SIRIUS Satellite Radio to renew the
subscription.
FIW UPDATING
The SiriusConnect tuner is updating the
firmware.
Wait until the updating is complete.
CALL SIRIUS
(CALL 888-539SIRIUS TO
SUBSCRIBE)
The selected channel is not subscribed.
Contact SIRIUS Satellite Radio to subscribe the
selected channel.
URL: https://activate.siriusradio.com/
Phone: l-888-539-SIRIUS (1-888-539-7474)
-
Select another channel.
28
SUB UPDATED
The subscription information is updated.
INVALID
The selected channel is currently out of
service.
NOT AVAILABLE
The operation you made is not available.
Select another channel.
-
-
-
28
53
En
TROUBLESHOOTING
•
iPhone/iPod
The following messages may be displayed on the front panel display in certain situations.
Message
Connect error
Status/Cause
There is a problem with the signal path
from your iPhone/iPod to the unit.
Unknown iPod
The iPhoneliPod being used is not
supported by the unit.
Connected
Your iPhone/iPod is properly placed in
the Universal Dock for iPod.
Your iPhone/iPod is properly placed in
the Wireless System for iPod and
connected with this unit via wireless
transmission.
Disconnected
Your iPhone/iPod is removed from the
Universal Dock for iPod.
Remedy
Tum off the unit and reconnect the Universal Dock
for iPod to the DOCK jack of the unit.
35
Remove your iPhoneliPod from the Universal Dock
for iPod and then place it back in the dock.
35
Connect an iPhone/iPod supported by the unit.
-------~
Your iPhone/iPod is disconnected with
this unit via wireless transmission.
The wireless connection is poor.
Problem
Cause
When using the
Universal Dock for
iPod:
Your iPhone/iPod is
not being charged
even though it is
connected to the
Universal Dock for
iPod.
The iPhone/iPod is not connected
securely.
When using the
Wireless System for
iPod:
Your iPhoneliPod is
not being charged
even though the YIDW10 transmitter
connected to your
iPhoneliPod is
stationed in the YIDW10 receiver.
The YID-WI 0 transmitter is not stationed
securely in the YID-WI 0 receiver.
54
En
See
page
35
-
37
-
Place the YID-WI 0 receiver as far away from this
unit as possible.
Remedy
35
See
page
Connect the iPhone/iPod securely to the Universal
Dock for iPod.
-
Station the YID-WI 0 transmitter connected to your
iPhone/iPod securely in the YID-WI 0 receiver.
-
TROUBLESHOOTING
•
Bluetooth™
The following messages may be displayed on the front panel display in certain situations.
Message
Searching ...
Status/Cause
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of pairing.
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of establishing a connection.
Completed
The pairing is completed.
Canceled
The pairing is canceled.
Connected
The connection between the Bluetooth
Wireless Audio Receiver and the
Bluetooth component is established.
Disconnected
Not found
The Bluetooth component is
disconnected from the Bluetooth Wireless
Audio Receiver.
The Bluetooth component is not found.
Pairing may not have been achieved.
Remedy
~
~
~
~
See
page
-
-
-
-
During pairing:
- pairing must be performed on the Bluetooth
component and this unit simultaneously. Check if
the Bluetooth component is in pairing mode.
During connecting:
- check if the Bluetooth component is turned on.
- check if the Bluetooth component is within 10 m
(32 feet) of the Bluetooth Wireless Audio
Receiver.
-
Try pairing again.
38
55
En
TROUBLESHOOTING
•
Remote control
Problem
The remote control
does not work nor
function properly.
56
En
Remedy
See
page
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel.
11
Cause
Wrong distance or angle.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
The batteries are weak.
Replace all batteries.
The remote controllD and this unit's ID
do not match.
Switch the remote control ID or this unit's ID.
The remote control code was not correctly
set.
Try setting another code of the same manufacturer
using "LIST OF REMOTE CONTROL CODES" at
the end of this manual.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Use the supplied remote control for the components.
You did not press the input selector button
corresponding to the component you are
trying to control.
Press the input selector button corresponding to the
component you are trying to control, and then press
the desired remote control button(s).
-
The remote control is not set to the correct
zone.
Set the remote control to the correct zone, the Main
zone or Zone 2, and then operate the remote control.
46
If the remote control batteries are weak or
removed, the remote control ID and zone
will switch to the default settings (102 and
Main zone).
Replace all batteries, and then set the remote control
ID and zone again.
-
II
44
49
-
44,46
SPECIFICATIONS
AUDIO SECTION
• Minimum RMS output power
[R-S700]
... 100W+ 100W
(8
20 Hz to 20 kHz, 0.019% THO)
120W+120W
(6
20 Hz to 20 kHz, 0.03% THD)
[R-S500]
(8 n, 20 Hz to 20 kHz, 0.04% THD)
.... 75 W + 75 W
• Dynamic power per channel (IHF)
(8/6/4/2 Q)
[R-S700]
140/170/220/290 W
[R-S500]
105/125/150/178 W
• Maximum power per channel [Europe model only]
(1 kHz, 0.7% THD, 4 Q)
160W
[R-S700]
.
105 W
[R-S500]
• IEC power [Europe model only]
ll5 W
[R-S700] (I kHz, 0.019% THO, 8 Q)
.
84 W
[R-S500] (I kHz, 0.04% THO, 8 Q)
• Power band width
[R-S700] (0.06% THO, 50 W, 8 Q)
10 Hz to 50 kHz
[R-S500] (0.06% THO, 37.5 W, 8 Q)
10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
I kHz, 8Q
[R-S700]
240 or more
[R-S500]
150 or more
• Maximum effective output power (lEITA)
[Asia (R-S500 only) and Central/South America models only]
. 145/170 W
[R-S700] (I kHz, 10% THO, 8/6 Q)
[R-S500] (I kHz, 10% THD, 8 Q)
115 W
• Input sensitivity/Input impedance
PHONO (MM)
3.5 mV/47 kQ
CD, etc
200 mV/47 kQ
1.0 V/47 kQ
[R-S700] MAIN IN
• Maximum input signal
PHONO (MM) (I kHz, 0.003% THD)
60 mV or more
2.2 V or more
CD, etc. (I kHz, 0.5% THO)
• Output level/Output impedance
CD, etc. (Input I kHz, 200 mY)
REC
200 mV/I.O kQ
CD, etc. (Input I kHz, 200 mY, 8 Q)
PHONES
410 mV/470 Q
• Frequency response
0 ± 0.5 dB
CD, etc. (20 Hz to 20 kHz)
[R-S700] CD, etc., PURE DIRECT on/MAIN IN
(10 Hz to 100 kHz)
O± 1.0 dB
[R-S500] CD, etc., PURE DIRECT on
(10 Hz to 100 kHz)
......................... O± 1.0dB
• RIAA equalization deviation
PHONO(MM)
.
.
± 0.5 dB
• Total harmonic distortion
PHONO (MM) to REC
0.025% or less
(20 Hz to 20 kHz, 3 V)
[R-S700]
CD, etc. to PRE OUT
.
0.005% or less
(20 Hz to 20 kHz, I V)
CD, etc. to SPEAKERS
0.015% or less
(20 Hz to 20 kHz, 50 W. 8 Q)
[R-S500]
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 37.5 W, 8 Q)
................... 0.015% or less
• Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted) ...
87 dB or more
CD, etc., PURE DIRECT on
100 dB or more
(200 mV input shorted)
.
[R-S700] CD, CD DIRECT AMP on
107 dB or more
(200 mV input shorted)
• Residual noise (IHF-A network)
.
30!JV
• Channel separation
CD, etc. (5.1 kQ input shorted. l/l 0 kHz) . .. 65/50 dB or more
n.
n.
• Tone control characteristics
BASS
Boost/Cut (50 Hz)
Turnover Frequency
TREBLE
Boost/Cut (20 kHz)
Turnover Frequency
• Continuous loudness control
Attenuation (I kHz) ..
• Gain tracking error (0 to -99 dB)
.
.. ± 10 dB
...350 Hz
.
±IOdB
......... 3.5 kHz
.
-30 dB
0.5 dB or less
FM SECTION
• Tuning range
[U.S.A. and Canada models]
87.5 to 107.9 MHz
[Asia (R-S500 only) and Central/South America models]
................................................. 87.5/87.50 to 107.9/108.00 MHz
[Europe, Russia and Australia models]
87.50 to 108.00 MHz
• 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)
Mono
.
30!JV (20.8 dBf)
• Signal to noise ratio (IHF)
Mono/Stereo
.
74 dBnO dB
• Harmonic distortion (I kHz)
Mono/Stereo
0.3%/0.3%
AM SECTION
• Tuning range
[U.S.A. and Canada models]
530 to 1710kHz
[Asia (R-S500 only) and Central/South America models]
......................................................... 530/531 to 1710/1611 kHz
531 to 1611 kHz
[Europe, Russia and Australia models]
GENERAL
• Power supply
[U.S.A. and Canada models]
AC 120 V, 60 Hz
[Central/South America models]
............................................... AC Il 0-120/220-240 V, 50/60 Hz
[Australia model]
AC 240 V, 50 Hz
[Europe and Russia models]
AC 230 V, 50 Hz
[Asia model (R-S500 only)]
AC 220-240 V, 50/60 Hz
• Power consumption
[R-S700]
..
.
270 W, 370 VA
[U.S.A. and Canada models]
[Other models]
..
270W
[R-S500]
[Asia model]
170 W
[Other models]
190 W
• Standby power consumption
0.5 W or less
• YID- WI 0 standby power consumption
(YID- WI 0 connect)
1.2 W or less
• iPod charge power consumption
[R-S700]
40 W or less
35 W or less
[R-S500]
.
• Maximum power consumption [Central/South America models
only]
[R-S700] (6 Q, I kHz, 10% THO) ..
.
570 W
[R-S500] (8 Q, I kHz, 10% THO)
380 W
435 x 151 x 387 mm
• Dimensions (W x H x D)
(17-1/8"x6"x 15-1/4")
• Weight
[R-S700] ..
........................................ 11.2 kg (24.7 Ibs)
.........
10.2 kg (22.5 Ibs)
[R-S500] ..
* Specifications are subject to change without notice.
57
En
LIST OF REMOTE CONTROL CODES
0171,0282,0337,
0339,0342
Aventura
0051
0277,0282
Awa
0156
Axion
0282
Baird
Bang & OlufsenOl80, 0339
0282, 0320, 0323,
Basic Line
0340,0343,0350
0282,0342
Bastide
0320,0349
Baur
Bazin
0282
0161,0269,0294,
Beko
0302, 0311, 0320,
0328,0351
Belcor
0008
Bell & Howell 0019,0054
0097,0242,0361
Benq
0320,0349,0350
Beon
0161
Best
0161,0320,0350
Bestar
0282,0342
Binatone
Blue Sky
0320,0340
0348
Blue Star
0282,0342
Boots
0320,0348
BPL
0058,0179
Bradford
0322,0345
Brandt
0182
Brillian
0320
Brinkmann
0320,0339,0349,
Brionvega
0350
0277,0282,0342
Britannia
Brockwood
0008
0109,0179
Broksonic
0339
Bruns
0340
BTC
0269,0282,0283,
Bush
0304,0320,0323,
0328,0332, 0340,
0343,0344, 0346,
0348, 0349, 0350,
0372, 0382, 0463,
0470,0472
0008, 0026, 0050,
Candle
0057
Capsonic
0337
Carena
0320
Camivale
0050
0344
Carrefour
Carver
0010
0320,0323,0343
Cascade
0367
Casio
0320,0349,0350
Cathay
0183,0282
CCE
0055,0107
Celebrity
Celera
0039
0320,0349,0350
Centurion
Century
0339
0161,0171
CGE
Changhong
0039
0273
Chimei
0323,0343
Cimline
0007,0008,0026,
Citizen
0050,0058
0323,0343
City
Clarion
0179
Clarivox
0349
0161, om, 0282,
Clatronic
0320, 0323, 0337,
0340, 0342, 0343,
0350,0351
CMS
0277
CMS Hightec 0282
Autovox
TV
0320
0342
0323,0343
0337
0054,0178,0336,
0337,0339,0346,
0347
0158
Advent
0057
Adventura
0277, 0282, 0342
Adyson
0277,0282
Agashi
0337
Agazi
0277,0282,0320,
Aiko
0323,0342,0343
0320
Aim
0078,0379
Aiwa
0050,0055,0109,
Akai
0159,0181,0277,
0282, 0320, 0323,
0340, 0343, 0349,
0350
0320,0340
Akiba
0320,0323,0337,
Akura
0340
0277
Alaron
0161,0277,0320,
Alba
0323, 0340, 0342,
0343, 0344, 0349,
0351,0372,0382
0140
Albatron
0171
Alcyon
Aileron
0059
0282
Allorgan
0320,0350
Allstar
America Action 0179
0276
AMOi
0161,0282,0321,
Amplivision
0342
0320,0323,0337,
Amstrad
0340,0343
0058
Amtron
0179,0343
Anam
Anam National 0052,0058
0323,0343
Anglo
0171,0320,0323,
Anitech
0337,0343
0161,0168,0320,
Ansonic
0323, 0341, 0343
0008, 0026, 0050,
AOC
0053
0039,0111,0217
Apex
0277,0282
Arcam
Arcam Delta
0342
0320,0349,0350
Aristona
Arthur Martin 0321
0339,0347
ASA
0171,0320,0350
Asberg
Astra
0343
0277,0282,0337,
Asuka
0340,0342
0277,0320,0342,
Atlantic
0349,0350
0323,0343
Atori
Auchan
0321
0161,0282,0320,
Audiosonic
0340,0342,0343,
0349,0350
0161,0282,0342
AudioTon
0058,0179,0194
Audiovox
Ausind
0171
A.R. Systems
Acme
Acura
ADC
Admiral
0197
Coby
0008,0026
Colortyme
Commercial Solutions
0021
0008,0026
Concerto
0323,0343
Concorde
0161,0277,0320,
Condor
0323,0342,0350,
0351
0179,0277,0323,
Contec
0342,0343,0344
Contec/Cony 0012,0058
Continental Edison
0345
0323,0343
Cosmel
0058,0179
Craig
0010,0037,0171 ,
Crosley
0339
0058,0161, om,
Crown
0179,0320,0323,
0343,0349,0350,
0351
CS Electronics 0277,0340,0342
CTC Clatronic 0341
0205
CTX
Curtis Mathes 0007,0008,0010,
0019,0021,0026,
0049,0050,0178
0058,0179
CXC
0340
Cybertron
0152
Cytron
0007,0008,0026,
Daewoo
0037,0053,0167,
0266,0275,0277,
0282, 0315, 0320,
0323, 0331, 0335,
0342, 0343, 0350,
0381,0465
0277,0340
Dainichi
0277, 0282, 0320,
Dansai
0337,0349,0350
0161,0349
Dantax
Dawa
0320
0007,0008,0026,
Daytron
0323,0343
0346
De Graaf
0282, 0320, 0342,
Decca
0349,0350
0145,0245
Dell
0358,0362
Denver
0320,0349,0350
Desmet
0320
Diamant
0277
Diamond
DiamondVision 0135,0143
Dimensia
0049
0219
Disney
0282, 0320, 0323,
Dixi
0343,0349,0350
Dream Vision 0461,0498
0323,0343
DTS
0282,0320,0342
Dual
0342,0343
Dual-Tee
0008, 0030, 0062,
Dumont
0282,0339,0341,
0342
0031,0051,0179,
Durabrand
0215
0349
Dux
0178
Dwin
0320,0349,0350
Dynatron
0228,0231
Dynex
0161,0168,0282,
Elbe
0320
Elcit
0339
Electa
ELECTRO TECH
Electroband
Electrograph
Electrohome
0348
0343
0055,0107
0176
0008, 0026, 0052,
0055
Element
0230
0277,0320,0323,
Elin
0342,0349,0350
0320,0340,0350
Elite
0341
Elman
0277,0323,0343
Elta
0000,0007,0008,
Emerson
0012,0013,0019,
0026,0031,0037,
0051,0058,0059,
0161,0179,0320,
0339
0154
Emprex
0008,0026,0050
Envision
0155,0206,0359
Epson
0320,0349,0350
Erres
0051
ESA
0282
ESC
0343
Etron
0282
Eurofeel
0337
Euro-Feel
0349
Euroline
0161,0277, 0282
Euroman
0320,0337,0342,
Euromann
0350
0277,0282,0320,
Europhon
0341, 0342, 0350
0321
Expert
0320
Exquisit
0323,0343
Fenner
0322,0345,0349
Ferguson
0277,0320,0342,
Fidelity
0346
0282
Filsai
0346
Finlandia
om, 0282, 0320,
Finlux
0339,0341,0342,
0349,0350
0342,0343,0350
FIRST LINE
0277,0282,0320,
Firstline
0323
0019,0161,0282,
Fisher
0339,0342,0344,
0351
0320,0350
Flint
0171,0277,0336,
Formenti
0339,0342,0349
FormentiIPhoenix 0277
0336,0339
Fortress
0161,0320
Fraba
0161
Friac
0282,0323,0337,
Frontech
0343,0346,0347
0059,0069,0074,
Fujitsu
0075,0282
Fujitsu General 0282
Fujitsu Siemens 0504, 0505, 0507,
0510,0511
005 I, 0058, 0059,
Funai
0112,0113, OilS,
0118,0119,0179,
0337
0058,0179
Futuretech
0320,0351
Galaxi
0161,0320
Galaxis
0176,0177,0241
Gateway
0323,0343,0344
GBC
0008, 0021, 0023,
0026, 0027, 0031,
0034,0049.0052,
0056,0209
Geant Casino 0321
0282, 0320, 0342,
GEC
0347,0349.0350
0323,0343,0346
Geloso
General Technic 0323, 0343
0320,0340,0347,
Genexxa
0350
0128.0227
GFM
Giant
0282
0008, 0030, 0050,
Gibralter
0062
GoldHand
0277
Goldline
0320
GoldStar
0007,0008,0012,
0026, 0031 , 0050,
0053,0161,0277,
0282, 0320, 0323,
0342, 0343, 0346,
0349,0350
Goodmans
0246. 0272, 0282,
0320,0323,0337,
0343,0344,0349,
0350, 0462, 0473,
0477
0161,0351
Gorenje
0340
GPM
0129
GPX
Gradiente
0240
0347
Graetz
0171, 0282, 0320,
Granada
0321, 0342, 0344,
0346,0349,0350
0340,0343,0348,
Grandin
0349
0282
Gronic
0160,0161,0171,
Grundig
0310,0320
0058,0059,0179
Grunpy
0157,0233
Haier
0277,0282,0337,
Halifax
0342
0008,0026,0031
Hallmark
0277,0282,0342
Hampton
0161,0168,0282,
Hanseatic
0320, 0323, 0342,
0343,0344,0349,
0350
0320,0323,0343
Hantarex
0320
Hantor
HarmanlKardon 00 I0
0058,0179
Harvard
0320,0323
Harwood
0178
Havermy
0282, 0320, 0323,
HCM
0337, 0342, 0343,
0348
0282,0323
Hema
Hewlett Packard 0 192
Higashi
0277
0320
HiLine
0320, 0323, 0340,
Hinari
0343, 0344, 0349,
0350
0321,0340,0348
Hisawa
0247
Hisense
GE
Hitachi
Hornyphon
Hoshai
Huanyu
Hygashi
Hyper
Hypson
Hyundai
Iberia
ICE
ICeS
110
IMA
Imperial
Indiana
Infinity
InFocus
Ingelen
Ingersol
Initial
Inno Hit
Innovation
Insignia
Inteq
Interactive
Interbuy
Interfunk
International
lntervision
Irradio
Isukai
ITC
ITS
lIT
lTV
Janeil
JBL
JC Penney
JCB
Jensen
JVC
Kaisui
Kamosonic
Kamp
0008,00 12, 0026,
0066, 0084, 0092,
0093.0120,0172.
0173, 0255, 0270,
0271, 0282, 0320,
0335,0338, 0342,
0344,0346,0347.
0365, 0382, 0448,
0456,0467
0320,0350
0340
0277,0342
0277,0282,0342
0277, 0282, 0323,
0342,0343
0282, 0320, 0321,
0337,0342,0348,
0349,0350
0141
0320
0277,0282,0320,
0323,0337,0340,
0342,0343,0350
0277
0148,0153
0058
0161,0171,0320,
0347,0350,0351
0320,0349,0350
0010
0250, 0327, 0363,
0479,0508
0347
0323,0343
0153
0171, 0282, 0320,
0323, 0340, 0342,
0343,0349,0350
0337,0343
0131, 0228, 0236,
0238
0030
0161
0323,0343
0161,0320,0339,
0347,0349,0350
0277
0161,0282,0320,
0337,0341,0342
0171, 0320, 0323.
0340,0343,0349,
0350
0320,0340
0282,0342
0277,0320,0340,
0348,0350
0343,0347
0320,0343,0349
0057
0010
0007,0008.0026,
0027,0049,0053,
0056
0055,0107
0008,0026
0012,0014,0015,
0056, 0064, 0065,
0067,0169,0174,
0297,0314,0344,
0350,0375
0277,0282,0320,
0323, 0340, 0342,
0343,0348
0342
0277, 0342
Kapsch
Karcher
Kawasho
KEC
Kendo
Kenwood
KIC
Kingsley
KLH
Kloss Novabeam
Kneissel
Koister
Konka
Korpel
Korting
Kosmos
Koyoda
KTV
Kyoto
Lasat
Lenco
Lenoir
Leyco
LG
LGIGoldStar
Liesenk
Liesenkotter
Life
Lifetec
Lloyds
Loewe
LoeweOpta
Logik
Luma
Lumatron
Lux May
Luxman
Luxor
LXI
M Electronic
MAG
Magnadyne
Magnafon
Magnavox
Magnum
Majestic
Mandor
0347
0161, 0320, 0342,
0343.0349
0008,0026,0055,
0277
0179
0161,0320.034 L
0346
0008,0026,0050
0282
0277,0342
0039
0057,0058
0161,0168,0320
0320,0350
0340
0320,0349,0350
0161,0339
0320
0343
0007,0050,0058,
0179,0183,0282,
0342
0277,0282
0161
0323,0343
0323,0342,0343
0320,0337,0349,
0350
0031,0053,0066,
0116,0117,0140,
0161,0164,0175,
0195,0269,0277,
0282,0300,0309,
0317,0320,0323,
0328, 0342,0343,
0346,0349,0350,
0366,0368,0377,
0466,0471,0478
0164
0349
0320
0337,0343
0320,0323,0337,
0343
0323
0161,0168,0265,
0320,0330,0352
0339,0349,0350
0054
0320, 0323, 0346.
0349
0282, 0320, 0346,
0349,0350
0350
0008,0026
0282,0342.0346
0010,0019,0021,
0026, 0027, 0031,
0049,0111
0342,0343,0345,
0347,0349,0350
0096
0339,0341,0349
0171,0277,0341,
0342
0008.0009,0010,
0013,0026,0032,
0033, 0048, 0050,
0128,0211,0212,
0224,0226,0239
0337.0343
0054
0337
0282,0320,0337,
0342,0349,0350
0008.0010.0026,
Marantz
0050, 0204, 0320.
0349,0350
0339
Marelli
0277,0282,0320,
Mark
0323,0349.0350
0282
Masuda
0282, 0320, 0323,
Matsui
0342, 0343, 0344,
0346, 0349. 0350,
0455
Matsushita
0017
0147,0176
Maxent
0320,0349,0350
Mediator
0320,0337.0343
Medion
0140
Megapower
0026,0031
Megatron
0277,0282,0320,
MElectronic
0323
Melvox
0321
Memorex
0019,0026,0031,
0053,0054,0137,
0215,0323,0343
0323,0343
Memphis
0320,0323
Mercury
0339
Metz
0008,0026,0031,
MGA
0050,0053
0337,0343
Micromaxx
Microstar
0337,0343
0007,0021,0023,
Midland
0027,0030,0056,
0062
Minerva
0171
Minoka
0320,0350
0153
Mintek
0008, 0026, 0031,
Mitsubishi
0053, 0066, 0084,
0093,0098,0150,
0178,0289,0320,
0339,0344,0350,
0376
0161,0168,0171,
Mivar
0277,0282,0342
Monivision
0140
Montgomery Ward
0054
Motion
0171
Motorola
0052,0178
0008, 0026, 0050,
MTC
0053,0161,0277
Multi System 0349
0058,0161,0179,
Multitech
0183,0277,0282,
0320, 0323, 0341,
0342, 0343. 0344.
0346,0349
0277,0342
Murphy
0026,0031,0111
NAD
0346
Naonis
0008, 0026, 0050,
NEC
0052, 0053, 0072,
0103, 0282, 0344
0161,0282,0320,
Neckermann
0339,0342,0346,
0349,0350,0351
0320,0349,0350
NEI
Net-TV
0176
0320,0323
Neufunk
New Tech
0343,0350
New World
0340
NewTech
0282,0320,0323
0277,0342
Nicamagic
Manesth
ii
Nikkai
Nikko
Nobliko
Nokia
Norcent
Nordic
Nordmende
Nordvision
Novatronic
Oceanic
Okano
Olevia
ONCEAS
Onwa
Opera
Oppo
Optimus
Optoma
Optonica
Orbit
Orion
Orline
Osaki
Oso
Otto Versand
Pael
Palladium
Palsonic
Panama
Panasonic
Panavision
Pathe Cinema
Pausa
Penney
Perdio
Perfekt
Philco
Philharmonic
iii
0277,0282,0320,
0323,0337, 0340,
0342,0349,0350
0026,0031,0050
0171,0277, 0341,
0342
0347
0201
0282
0339,0345, 0347,
0350
0349
0320
0321,0347
0161,0320,0351
0102,0199,0200,
0207,0222
0342
0058,0179
0320
0130
0017,0019
0144
0178
0320,0350
0043,0146,0283,
0320, 0323, 0328.
0343,0349,0350
0320
0282, 0320, 0337,
0340,0342
0340
0282, 0320, 0336,
0342,0344,0348.
0349,0350
0277,0342
0161,0282,0320,
0342,0351
0282
0277,0282,0320,
0323, 0337. 0342,
0343
0016,0017.0020,
0022, 0023. 0035,
0052,0056,0084,
0085,0133.0163,
0193,0284,0286,
0290, 0292, 0320,
0325,0347,0356
0320
0161,0168,0277,
0321,0342
0323,0343
0021,0023.0031,
0050,0111
0277,0320
0320
0008,0009.0010,
0012,0026.0050,
0052,0053.0161,
om, 0320. 0339
0282,0342
0008,0009,0010,
0011,0012,0032,
0048,0049, 0052,
0122,0128,0134,
0186,0187,0213,
0221,0224,0226,
0239,0256,0257,
0259,0261,0263,
0267,0280,0281,
0287,0296,0299,
0301,0303,0305,
0313, 0319, 0320,
0324,0333, 0339,
0342, 0349, 0350,
0353,0357,0360,
0380,0383, 0452,
0459,0460
Philips Magnavox 0011,0032,0033
0161,0277, 0320,
Phoenix
0339.0349,0350
0277, 0320, 0339,
Phonola
0349,0350
0007,0008,0050
Pilot
0008, 0026, 0094,
Pioneer
0095,0161,0320,
0345,0347,0349,
0350,0458
0320.0323,0337.
Plantron
0350
Playsonic
0282
0039,0142,0202,
Polaroid
0234
0323,0343
Poppy
0007,0008.0026,
Portland
0053
Prandoni-Prince 0171, 0346
0282,0342
Precision
0157,0243,0323,
Prima
0343,0347
0140
Princeton
0023,0056
Prism
0323,0343
Profex
0320,0350
Profi-Tronic
0320,0350
Proline
0021,0027,0049
Proscan
0161,0277,0282,
Prosonic
0320,0342,0349
0282,0337.0341,
Protech
0342,0343,0349,
0350
0008,0012,0026,
Proton
0031
0196
Protron
PROVIEW
0096,0246
0320,0349
Provision
0008,0030,0062
Pulsar
0256,0320,0349,
Pye
0350,0378
0323,0343
Pymi
Quandra Vision 0321
0017, 0023, 0052,
Quasar
0056
0282,0320,0337,
Quelle
0342.0349,0350
Questa
0344
Radial va
0320
0019,0021,0031,
RadioShack
0050,0179,0320
RadioShack/Realistic
0007,0008,0012,
0026,0049,0058
0282,0320, 0349,
Radiola
0350
Radiomarelli
0320,0339
Philips
0161,0320,0323,
0350
0344
Rank
0008,0021,0024,
RCA
0025,0026,0027,
0042, 0049, 0052,
0053,0063,0136,
0225
0019,0031,0050,
Realistic
0179
0320
Recor
0320
Redstar
0320
Reflex
0161,0320,0349,
Revox
0350
0337,0346,0347
Rex
0161,0168,0339
RFf
0277
Rhapsody
0320,0349,0350
R-Line
0323,0337,0340.
Roadstar
0343
0339
Robotron
0277,0282
Rowa
0161
Royal Lux
0339
RTF
0030,0050,0062
Runco
0298,0322,0339,
Saba
0345,0347
0282,0323,0337,
Saisho
0342,0343
0346,0347
Salora
0171,0341
Sambers
0007, 0008, 0026.
Sampo
0050,0176
0004, 0005, 0006,
Samsung
0007,0008,0012.
0026, 0031, 0036.
0050, 0053, 0076,
0077,0079,0114,
0124,0125,0126.
0127,0139,0161,
0183, 0185, 0190,
0191, 0258, 0264,
0277,0282,0320,
0323,0334,0337,
0342,0343,0349,
0350,0351,0373,
0453,0468
0277,0282,0342
Sandra
0043,0109,0320,
Sansui
0350
0008,0019,0068,
Sanyo
0070,0071,0099.
0161,0168,0223,
0237, 0277, 0282,
0288,0295, 0323.
0342,0344,0369,
0469
0320,0349
SBR
0235,0244
Sceptre
Schaub Lorenz 0347
0282, 0316, 0318,
Schneider
0320, 0333, 0340,
0342, 0349, 0350,
0382
0026,0031
Scotch
0008,0012,0026,
Scott
0031,0058,0059,
0149,0179
0008,0010,0019,
Sears
0021,0026.0027.
0031,0049,0051,
0059,0111
Radiotone
0277,0282,0320,
0323,0337,0341,
0342,0344,0349,
0382
SEI
0320
SEI-Sinudyne 0339,0341,0347
0344,0346,0347
Seleco
Sencora
0323,0343
Sentra
0323
Serino
0277
0000,0001,0002,
Sharp
0003,0007,0008,
0012,0026,0060,
0088,0089,0091,
0138,0165,0170,
0178,0198,0229,
0262, 0278, 0279,
0291,0308,0312,
0336,0344,0354,
0370, 0449, 0450,
0451,0464,0474,
0476
Sheng Chia
0178
0008
Shogun
0320,0339,0341
Siarem
0320,0350
Sierra
0161
Siesta
0054
Signature
Silva
0277
0344
Silver
0321,0339.0341
Singer
0320, 0339, 0341,
Sinudyne
0349
0347
Skantic
Solavox
0347
0161,0282
Sonitron
0282, 0320, 0323,
Sonoko
0337, 0342, 0343,
0349,0350
0321,0347
Sonolor
0161.0320,0349,
Sontec
0350
0038, 0044, 0045,
Sony
0047,0055,0104,
0105,0107, OlIO,
0123,0184,0220,
0248,0249,0251,
0252, 0254, 0326,
0343,0344,0371,
0374.0457,0475
Sound & Vision 0340, 0341
0008. 0026, 0031,
Soundesign
0058,0059.0179
0320.0349,0350
Soundwave
0051
Squareview
0008,0058,0179
SSS
0282, 0320, 0323,
Standard
0340, 0342. 0343,
0350
0058,0179,0320,
Starlite
0323,0349
0348
Stenway
0346,0347
Stem
0320,0323
Strato
0282
Stylandia
0343
Sunkai
0320.0323
Sunstar
0320, 0323,0343,
Sunwood
0350
0277,0282,0342
Superla
0013,0178
Superscan
0277,0320,0323
SuperTech
0323,0343
Supra
0057
Supre-Macy
0055,0107
Supreme
SEG
0340
0323,0343
0151
0277,0282,0342
0008,0009,0010,
0011,0013,0026,
0048, 0050, 0051,
0128,0227,0253
0051, 0058, 0062,
Symphonic
0128,0179,0215
Syntax
0199
Syntax-Brillian 0199
Sysline
0349
Sytong
0277
Tandy
0178, 0282, 0336,
0340,0342,0347
0277,0282,0342,
Tashiko
0344,0346
0052, 0177, 0282,
TalUng
0320, 0342, 0349,
0350
TCM
0337,0343
Teac
0282,0320
0282, 0323, 0342,
Tec
0343
0017,0023,0056
Technics
TechniSat
0274,0496,0497,
0499
0008, 0023, 0026,
Techwood
0056
0282
TEDELEX
Teknika
0007,0008,0010,
0012,0026,0053,
0054, 0058, 0059,
0179
0345
Teleavia
0282,0320
Telecor
Telefunken
0320,0322,0345,
0350
Telegazi
0320
Telemeister
0320
Telesonic
0320
0320
Telestar
Teletech
0320, 0323, 0343,
0349
0282,0342
Teleton
Televideon
0277
Televiso
0321
0282, 0320, 0323,
Tensai
0340,0343,0350
Tesmet
0350
0337,0343
Tevion
0277,0282,0323,
Texet
0342
Thomson
0162,0188,0189,
0285, 0320, 0322,
0342,0345,0350
Thorn
0320,0349
0008, 0026, 003 I
TMK
TNCi
0030
Tokai
0282,0320,0350
Tokyo
0277,0342
Tomashi
0348
0018,0019,0040,
Toshiba
0041,0046,0073,
0100,0103,0108,
0109,0111,0121,
0132,0166,0208,
0210,0214,0217,
0260, 0268, 0282,
0283,0293,0304,
0306,0307,0329,
0344,0355,0454
Totevision
0007
Towada
0282,0347
Susumu
Sutron
SVA
Sydney
Sylvania
Trakton
0282
Trans Continens 0282, 0320
Transtec
0277
0282
Trident
0320
Triumph
0161,0171,0320,
Uher
0347.0350
0277,0320,0339,
Ultravox
0341,0342
Unic Line
0320
0349
United
0161,0171,0282,
Universum
0320,0337,0349,
0350,0351
Univox
0320
Vector Research 0050
0282, 0320, 0346,
Vestel
0347,0349,0350,
0351
0320, 0323, 0343,
Vexa
0349
0015,0344,0350
Victor
VIDEOLOGIC 0277
Videologique 0277,0282,0340,
0342
VideoSystem 0320,0350
Videotechnic
0277,0282
Vidikron
0010
0008, 0026, 0031,
Vidtech
0053
0176,0203,0232,
Viewsonic
0364
Viking
0057
Viore
0148
0277, 0342
Visiola
Vision
0282,0320,0350
0008,0177,0218,
Vizio
0242,0500,0501,
0502,0503,0506
0320,0349,0350
Vortec
o171, 0320, 0339,
Voxson
0346,0347,0350
Waltham
0282,0320,0342
0008,0009,0010,
Wards
0026, 0031, 0048,
0049, 0050, 0053,
0054,0059
Watson
0320,0349,0350
0277,0341,0342
Wall Radio
Waycon
0111
0320,0339,0344
Wega
Wegavox
0323
0282, 0320, 0349,
Weltblick
0350
Westinghouse 0107,0216,0220
White Westinghouse
0037,0090,0277,
0320,0341,0342.
0349
0101,0106
Wincom
Xrypton
0320
0008, 0026, 0050,
Yamaha
0053, 0080, 0081.
0082, 0083, 0086,
0087
0282,0320
Yamishi
0320
Yokan
0161,0277.0282,
Yoko
0320,0323,0337,
0340, 0342, 0343,
0349,0350
Yorx
0340
0282,0346
Zanussi
Zenith
0008,0028,0029,
0030, 0031, 0054,
0061,0062
VCR
1016
1069
1008
1024, 1026, 1027,
1069
Akai
1021, 1027
1008, 1029
Akiba
1008, 1027, 1029
Akura
1008, 1009, 1024,
Alba
1025,1029,1030
Alienware
1016
Ambassador
1030
American High 1068
1008, 1009, 1026
Amstrad
1008,1029
Anitech
Apex
1088
1028, 1031
ASA
1070
Asha
1008, 1026, 1028,
Asuka
1029,1031
Audio Dynamics 1064
1009
Audiosonic
Audiovox
1071
Baird
1009, 1025, 1026,
1027
Bang & Olufsen 1017
1008, 1009, 1024,
Basic Line
1025, 1029, 1030
1028
Baur
Beaumark
1070
Bell & Howell 1065
1009, 1025, 1030
Bestar
Black Panther Line
1009,1025
1028
Blaupunkt
1008, 1030
Bondstec
Broksonic
1100
1008, 1009, 1024,
Bush
1025,1029,1049,
1051,1063,1217
1071
Calix
Candle
1070,1071
Canon
1068
Cathay
1009
1030
Catron
1026,1027
CGE
Cimline
1008, 1024, 1029
CineVision
1104
Citizen
1070,1071
Clatronic
1008,1030
Colortyme
1064
1009,1025,1030
Condor
1070,1071
Craig
1008,1009,1025,
Crown
1029, 1030
Curtis Mathes 1064, 1068, 1070
1070
Cybernex
CyberPower
1016
Daewoo
1009, 1025, 1030,
1038, 1069,1223
1008, 1009, 1029
Dansai
Dantax
1024
1009, 1025
Daytron
1064
DBX
1028
De Graaf
1026, 1027, 1028
Decca
Dell
1016
Denko
1008
DiamondVision 1096
ABS
Adventura
Adyson
Aiwa
1014
1019,1105,1110,
1111.1113,1116,
1122
Dish Network 1018
Dishpro
1018
1009,1027,1028
Dual
1026, 1028
Dumont
1114
Durabrand
Dynatech
1069
1018
Echostar
1009
Elbe
Elcatech
1008
Electrohome
1071
Electrophonic 1071
EIsay
1008
1008, 1009, 1029
Elta
1008, 1020, 1068,
Emerson
1069,1071
1009, 1025
ESC
1008,1029
Etzuko
1018
Expressvu
Ferguson
1027
1008,1026
Fidelity
1028
Finlandia
1026, 1027, 1028
Finlux
1008, 1024, 1029,
Firstline
1031
Fisher
1065
1024
Flint
ForrnentilPhoenix 1028
Frontech
1030
1068
Fuji
1026
Fujitsu
1026, 1069
Funai
Galaxy
1026
Garrard
1069
Gateway
1016
1029, 1030
GBC
1068, 1070
GE
1028
GEC
1029
Geloso
General
1030
General Technic 1024
1018
GO!
GoldHand
1008, 1029
1026,1031,1064,
Goldstar
1071
1008, 1009,1025,
Goodmans
1026, 1029, 1030,
1031
1069
Gradiente
1027
Graetz
Granada
1028
1008, 1009. 1025,
Grandin
1026, 1029, 1030,
1031
1028, 1029
Grundig
Hanseatic
1009, 1028, 1031
Harley Davidson 1069
HarrnanlKardon 1064
Harwood
1008
1008, 1029
HCM
Headquarter
1065
Hewlett Packard 1016
1008, 1009, 1024,
Hinari
1029
Hisawa
1024
1011,1026,1027,
Hitachi
1028, 1046, 1062
1110
HNS
Howard Computers
1016
HP
1016
HTS
1018
DigiFusion
DIRECfV
iv
1111, 1113, 1122
Hughes
Hughes Network Systems
1110,1116
1012,1110,1113
Humax
1016
Hush
1008, 1009, 1024,
Hypson
1029
iBUYPOWER 1016
1030
Impego
1026
Imperial
1008, 1009, 1025,
InnoHit
1028, 1029, 1030
1024
Innovation
Instant Replay 1068
1008, 1031
Interbuy
1028
Interfunk
1009, 1026
Intervision
1008,1029,1031
Irradio
1027
ITT
1009,1025,1031
lTV
1064, 1065, 1068,
JC Penney
1070, 1071
1068
JCL
1007,1018,1027,
JVC
1039, 1064, 1065,
1066, 1067, 1078,
1089, 1092, 1093,
1094, 1095, 1113,
1208,1209,1212,
1213, 1215, 1218
1008, 1029
Kaisui
1028
Karcher
1008, 1024, 1025,
Kendo
1030
1027, 1064, 1065
Kenwood
1068,1071
Kodak
1008, 1029
Korpel
1008
Kyoto
Lenco
1025
1008,1029
Leyco
1010, 1026, 1031,
LG
1047, 1054, 1056,
1071,1103,1221
1024
Lifetec
1016
Linksys
Lloyd's
1069
1028,1031
Loewe Opta
1008, 1029
Logik
1009,1025
Lumatron
1008
Luxor
LXI
1071
M Electronic
1026
1020, 1068, 1114,
Magnavox
1126
Magnin
1071
1008, 1029
Manesth
1028, 1064, 1065,
Marantz
1068
Mark
1009
1071
Marta
1024, 1031
Matsui
Matsushita
1068
Media Center PC 1016
1028
Mediator
Medion
1024
MEl
1068
1023,1026,1031,
Memorex
1065, 1068, 1069,
1070, 1071, 1098,
1114
1008,1029
Memphis
MGN Technology 1070
1024
Micromaxx
Microsoft
1016
1024
Microstar
V
Migros
Mind
Mitsubishi
Motorola
MTC
Multitech
1026
1016
1026, 1028, 1"079
1068
1070
1008, 1026, 1028,
1029,1030, 1069,
1070
Murphy
1026
1027,1064, 1065
NEC
1027, 1028
Neckermann
1028
NEI
1008,1029
Nesco
1008, 1009, 1030
Nikkai
1071
Nikko
Niveus Media 1016
1070
Noblex
1009, 1027
Nokia
Nordmende
1027
Northgate
1016
1026,1027
Oceanic
1008, 1009, 1024
Okano
1068
Olympus
1071
Optimus
1023,1024,1051,
Orion
1115,1217
Orson
1026
1008, 1026, 1029,
Osaki
1031
Otto Versand
1028
1008, 1027, 1029,
Palladium
1031
1000, 1022, 1044,
Panasonic
1055, 1068, 1072,
1085,1090,1091,
1120,1121,1214
Pathe Marconi 1027
1026
Perdio
1008, 1068
Phileo
1006, 1013, 1028,
Philips
1035, 1040, 1045,
1046, 1050, 1058,
1059,1061, 1068,
1076,1101,1110,
1113,1116,1117,
1122,1126,1210,
1211
Philips Magnavox 1076
1028
Phonola
1071
Pilot
1028, 1036
Pioneer
1088, 1099
Polaroid
1009,1025,1030
Portland
Prinz
1026
Profex
1029
Proline
1026
1019
Proscan
1009,1024
Prosonic
1114
Pulsar
1028, 1102
Pye
Quarter
1065
Quartz
1065
Quasar
1068
1026,1028
Quelle
Radialva
1008
1071
RadioShack
RadioShackIRealistic
1065,1068,1069,
1070,1071
Radiola
1028
1071
Radix
1071
Randex
1019,1068,1070,
RCA
1075,1110,1113,
1122,1125
1065, 1068, 1069,
1070,1071
1022, 1123
ReplayTV
Rex
1027
1008, 1028, 1030
RFI'
Ricavision
1016
1008, 1009, 1025,
Roadstar
1029,1031
Royal
1008
1114
Runco
1027
Saba
1024,1029
Saisho
1002,1034,1041,
Samsung
1043,1057,1060,
1070, 1084, 1110,
1116,1122,1124,
1220, 1222
1008,1030
Samurai
1114
Sanky
1023, 1027, 1106,
Sansui
1115
1032, 1065, 1070
Sanyo
Saville
1009
SBR
1028
Schaub Lorenz 1026, 1027
1008,1009, 1024,
Schneider
1025, 1026, 1028,
1029, 1030, 1031
1065,1068,1071
Sears
1008,1009, 1029
SEG
SEI-Sinudyne 1028
Seleco
1027
1008, 1030
Sentra
1008, 1029
Sentron
1003, 1033, 1077,
Sharp
1107,1127,1219
1008, 1029
Shintom
1031
Shivaki
1070
Shogun
1031
Siemens
1031
Silva
Silver
1009
Singer
1068
1028
Sinudyne
Solavox
1030
1022, 1123
Sonic Blue
Sonneclair
1008
1009, 1025
Sonoko
1031
Sontec
1001, 1016, 1048,
Sony
1053, 1073, 1074,
1080, 1081, 1082,
1083, 1108, 1118,
1216
1016
Stack
1016
Stack 9
1009, 1025
Standard
Stem
1009
1068
STS
1024
Sunkai
Sunstar
1026
Suntronk
1026
1008,1029
Sunwood
Superscan
1020
1020, 1068, 1069,
Sylvania
1102,1126
1008, 1069, 1126
Symphonic
Systemax
1016
Tagar Systems 1016
1024
Taisho
Tandberg
1009
Tandy
1065
1026, 1071
Tashiko
1026,1027, 1028
Tatung
lOIS, 1024, 1042
TCM
Realistic
Teac
Tec
Technics
Teknika
Teleavia
Telefunken
Teletech
Tenosal
Tensai
1009, 1069
1008, 1009, 1030
1068
1068, 1069, 1071
1027
1027
1008, 1009
1008, 1029
1008, 1026, 1029,
1031
Tevion
1024
Thomson
1005,1027
Thorn
1027
Tivo
1108, I 110, 1111,
1113,1117,1118,
1119,1122
1070
TMK
1008,1029,1031
Tokai
1029
Tonsai
1004,1016,1027,
Toshiba
1028, 1037, 1049,
1052, 1086, 1087,
1097,1109,1112,
1194
1070, 1071
Totevision
Touch
1016
1008, 1029
Towada
1008,1029
Towika
TVA
1030
1031
Uher
UltimateTV
1019
1009
Ultravox
Unitech
1070
United Quick Star 1009, 1025
1026, 1028, 1031
Universum
Vector Research 1064
Video Concepts 1064
1024
Videon
1070
Videosonic
1016
Viewsonic
1016
Voodoo
1068, 1069, 1070,
Wards
1071
Weltblick
1031
1068, 1069
XR-lOOO
1064, 1065
Yamaha
1008, 1029
Yamishi
1008,1029
Yokan
1008, 1029, 1030,
Yoko
1031
1114
Zenith
1016
ZTGroup
DVD player
4Kus 2051
Accurian
Advent
AEG
Airis
Aiwa
Akai
2142
2155,2251
2362
2364
2322
2145,2177,2179,
2248
2356
Akura
2064,2165,2186,
Alba
2337,2346
2149
Aleo
2361
Alize
2133
Allegro
2362
Amitech
Amphion MediaWorks
2195
2195,2363
AMW
2030, 2124, 2125,
2126,2127,2130,
2131
2241
Apple
2138
Arrgo
Asono
2364
2152,2222
Aspire
2240
Astar
ATACOM
2364
Audiovox
2061,2149
Avious
2367
Awa
2363
Axion
2249
Bang & 01ufsen 2128
Baze
2367
BBK
2364
Bellagio
2363
Best Buy
2359
Blaupunkt
2131
Blue Parade
2157
Boghe
2382
Brainwave
2362
Brandt
2148,2188
2145,2146
Broksonic
2064, 2110, 2170,
Bush
2268, 2290, 2346,
2358,2367,2383
California Audio Labs
2151
Cambridge Audio 2354
2352,2353
CAT
2192
CAYS
Centrum
2353
2354,2362
CGV
2140
Changhong
Cinetec
2363
2133,2237
CineVision
2358,2367
Clatronic
2031,2046,2360
Coby
Conia
2383
Continental Edison
2363
Crown
2362
C-Tech
2355
Curtis Mathes 2139
CVG
2377
2022, 2098, 2138,
CyberHome
2187,2336
Cytron
2244
2363
Daenyx
2001,2133,2276,
Daewoo
2298, 2330, 2362,
2363,2377
Daewoo International
2363
2357
Dalton
2362,2381
Dansai
2184,2195,2363
Daytek
Dayton
2363
2358
DEC
2362
Decca
2059,2151,2193,
Denon
2332
2356, 2358, 2360,
Denver
2370
Denzel
2380
Desay
2205
2354,2355
Diamond
DiamondVision 2225, 2232
2010,2028
Disney
DK Digital
2339
2176
Dmtech
Dual
2380
Durabrand
2136
DVX
2355
Apex
Easy Home
2359
2354
Eclipse
2364
E-Dem
2362
Electrohome
2362
Elin
2341,2361,2362
Elta
2129,2137,2150
Emerson
Enterprise
2129
2380
Enzer
2247
Epson
2137
ESA
2354,2362.2367
Finlux
2377
Fintec
2134
Fisher
2137
Funai
2051
Gateway
2029,2131,2156
GE
2351
Gericom
2226
GFM
2382
Giec
Global Solutions2355
Global Sphere 2355
2133,2213
Go Video
2165, 2280, 2291,
Goodmans
2358, 2371, 2376,
2382
2227
GPX
2151
Gradiente
Graetz
2380
2131
Greenhill
Grundig
2349
2362,2366
Grunkel
GVG
2377
2358
H&B
H_her
2364
2354,2355
Haaz
2254
Haier
HannanlKardon 2047, 2135
2359
HiMAX
2062,2090,2115,
Hitachi
2274,2282,2316,
2359,2380
2130
Hiteker
Home Tech Industries
2364
2366
Hyundai
2245
110
2131,2245
Initial
Innovation
2182
2002,2137,2253
Insignia
Integra
2157
2053
Irradio
2246
iSymphony
2135
JBL
2020, 2096, 2097,
lVC
2099,2100,2101,
2102,2103,2106,
2107,2160,2257,
2260, 2262, 2263,
2321, 2324, 2326,
2327,2343,2464,
2465, 2468, 2469,
2471
lwin
2198
Kansai
2360
Kawasaki
2149
2362
Kennex
2041,2151,2348
Kenwood
2362
KeyPlug
Kiiro
2362
2358
Kingavon
2380
Kiss
2131,2149
KLH
2358
Koda
2013,2148,2158
Koss
KXD
Landel
Lasonic
Lawson
Leeson
Lenco
Lenoxx
LG
Life
Lifetec
Limit
Liquid Video
Liteon
Loewe
LogicLab
Magnavox
Magnex
Majestic
Marantz
Marquant
Matsui
McIntosh
Mecotek
Medion
Memorex
MiCO
Micromaxx
Microsoft
Microstar
Minoka
Minowa
Mintek
Mitsubishi
Mizuda
Monyka
Mustek
Mx Onda
Mystral
Naiko
Nesa
Neufunk
Nevir
Next Base
Nexxtech
NU-TEC
Onkyo
Oopla
Oppo
Optim
Optimus
Orava
Orbit
Orion
Oritron
P&B
Pacific
Panasonic
Parasound
2359
2143
2132
2355
2381
2358,2362,2367
2136,2153
2002, 2033, 2038.
2057,2129,2133,
2189,2191,2223,
2238, 2270, 2288,
2335,2373.2375
2182
2182
2355
2158
2043,2051,2142
2320
2355
2025,2050,2137,
2150,2159,2224,
2230, 2358
2367
2360
2328
2362
2148,2378
2199
2362
2182
2028,2145,2234
2354,2382
2182
2156
2182
2362
2367
2131,2245
2003
2358, 2359
2380
2186
2354
2366
2362
2131
2380
2362
2143
2243
2383
2159,2368
2051
2196,2255
2381
2180
2358
2363
2073,2110
2148,2158
2358
2355
2011,2024,2034,
2042, 2058, 2062,
2066,2067,2093,
2116,2117,2118,
2119,2120,2121,
2122,2123,2151,
2159,2164,2166,
2167,2172,2173,
2175,2209,2214,
2275, 2277, 2278,
2281, 2282, 2283,
2301,2374,2470
2197
2364
2008, 2012, 2025,
2044, 2050, 2051.
2053, 2060, 2072,
2108,2111,2147,
2159,2163,2169,
2174,2181,2185,
2230, 2261, 2266,
2267, 2286, 2287,
2289,2295,2300,
2302,2317,2328,
2338, 2342, 2350,
2467
2367
Phonotrend
2016,2017,2018,
Pioneer
2019,2035,2092,
2094,2095,2109,
2157,2180,2190,
2212,2269,2272,
2299,2304,2305,
2306, 2307, 2308,
2309, 2310, 2311,
2344,2345,2347,
2379
2362
Pointer
2125,2215,2235
Polaroid
Portland
2362
Powerpoint
2363
2252
Prima
Proceed
2130
2156
Proscan
2360,2377
Prosonic
Protron
2202
Provision
2358
2144
Pye
Qwestar
2148
Raite
2380
2021,2029,2104,
RCA
2105,2131,2149,
2156,2157,2229
2356,2360,2362
RedStar
Regent
2153
Reoc
2355
2361
Rimax
2133
Rio
2331,2358
Roadstar
Ronin
2363
Rotel
2203
Rowa
2154,2383
2353
Rownsonic
2148,2188
Saba
2355
Sabaki
Saivod
2362
2141
Sampo
Samsung
2000,2045,2077,
2112,2113,2114,
2115,2151,2200,
2216, 2219, 2228,
2264, 2265, 2271,
2279,2294,2303,
2329,2365
2073,2145,2354,
Sansui
2355,2362
2134,2145,2217,
Sanyo
2292
ScanMagic
2186
Schaub Lorenz 2362
2176
Schneider
Scientific Labs 2355
2161,2357
SCOl!
2364
Seeltech
2162,2355,2363,
SEG
2380
peeKTON
Philips
vi
Sharp
Shinsonic
Sigmatek
Silva
Singer
Skymaster
Skyworth
Slim Art
SM Electronic
Sonic Blue
Sontech
Sony
Soundmaster
Soundmax
Spectra
Spectroniq
Standard
Star Cluster
Starmedia
Sungale
Sunkai
Superscan
Supervision
Sylvania
Symphonic
Synn
T.D.E. Systems
Tatung
TCM
Teac
Tee
Technics
Technika
Telefunken
Tensai
Tevion
Theta Digital
Thomson
Tokai
Top Suxess
Toshiba
TRANScontinents
Transonic
Trio
Trutech
TruVision
TSM
Umax
United
Urban Concepts
US Logic
vii
2006, 2040, 2088,
2091,2182,2194,
2220, 2221, 2231,
2236,2293,2340
2245
2359,2364
2356
2354,2355
2325,2355
2356
2362
2355
2133
2366
2004,2005,2007,
2009,2014,2015,
2023,2026,2027,
2052, 2068, 2069,
2070,2071,2074,
2075,2084,2085,
2087,2168,2171,
2208, 2210, 2211,
2258, 2273, 2284,
2285, 2312, 2313,
2314,2315,2318,
2319,2466
2355
2355
2363
2201
2355
2355
2358,2364
2204
2362
2150
2355
2012,2137,2150,
2178, 2230, 2239
2108,2230
2355
2366
2001,2362
2182,2297
2149,2333,2355,
2383
2356
2151
2362,2367
2353
2362
2182,2355,2357
2157
2183,2188,2334,
2372
2356,2380
2364
2032,2036,2037,
2039,2048,2049,
2054, 2055, 2072,
2073, 2076, 2078,
2079,2086,2145,
2159,2218,2233,
2256, 2259, 2296,
2369
2363,2367
2367
2362
2242
2359
2364
2361
2367
2159
2245
Venturer
Viewmaster
Vocopro
VocoStar
Waitec
Welltech
Westinghouse
Wharfedale
Woxter
Xbox
Xlogic
XMS
Xoro
Yamada
Yamaha
Yamakawa
Yukai
Zenith
2149
2364
2206
2207
2364
2382
2063,2250
2354,2355
2361,2364
2156,2183
2355,2362
2362
2382
2051,2361,2363
2056, 2064, 2065,
2080,2081,2082,
2083,2089,2118,
2151,2323
2363,2380
2186
2002,2129,2133,
2159,2223
Blu-ray disc player
LG
Panasonic
Pioneer
Samsung
Sharp
Sony
Yamaha
2033
2011,2209,2214
2212
2045,2113
2194,2220,2221
2075
2064,2474
OVR
Bush
Hitachi
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
2110
2090
2066,2067,2093,
2116,2117,2119,
2120,2122,2123
2108,2111
2016,2017,2018,
2019,2092,2094,
2095,2109
2105
2113,2219
2088,2091
2084,2085,2087
2086
2089,2118
OVO recorder
Aspire
Astar
Broksonic
Go Video
Hitachi
Insignia
Irradio
JVC
LG
Liteon
Panasonic
Philips
Pioneer
Pye
Samsung
Sansui
2222
2240
2146
2213
2062
2002
2053
2100,2101,2106,
2107
2033,2057,2223,
2238
2043
2011,2034,2058,
2062,2116,2117,
2119,2120,2121,
2123
2008, 2044, 2050,
2051,2147
2017,2035
2144
2000,2112,2216
2073
Sanyo
Sony
Sylvania
Toshiba
Yamaha
2217
2004,2005, 2007,
2052,2068,2069,
2074,2208,2210,
2211
2239
2032,2036,2037,
2039,2049,2054,
2055,2076
2056
Cable TV
ABC
3002,3003,3017,
3066, 3067, 3086,
3093,3119,3122
3020
ADB
3081
Adelphia
Alcatel
3016
Americast
3124
3022,3098
Amstrad
Antronix
3065,3070
Archer
3070
Arcon
3098
AT&T
3095
Axis
3098
Bell South
3124
Cable Vision
3092
Cabletenna
3065
3104
Cabletime
Cableview
3087
Clearmaster
3127
3127
ClearMax
Clyde Cablevision 3105
3068
Colour Voice
3084, 3088, 3117
Comcast
Comcrypt
3107
Comtronics
3069
3074
Contec
Coolmax
3127
COX
3084
Cryptovision
3110
Director
3084
Eastern
3075
Everquest
3123
Fidelity
3098
Filmnet
3107
Filmnet Cablecrypt
3111
Filmnet Comcrypt
3111
Finlux
3097
Focus
3126
Foxtel
3022
France Telecom 3100, 310 I
Freebox
3023
GC Electronics 3070
3066,3093
GE
3105
GEC
3072,3123
Gemini
General Instrument
3017,3025,3066,
3084, 3090, 3096,
3117
Goldstar
3120
Gooding
3099
Grundig
3098,3099
Hamlin
3073,3078
Hirschmann
3097
Hitachi
3066
HomeChoice
3106
Humax
3021,3080,3083
ITT Nokia
3097
3123
Jasco
Jerrold
3017,3018,3025,
3066, 3072, 3084,
3090, 3096, 3119,
3123
JVC
3099
Kabel Deutschland
3024,3027,3121
Macab
3101
Magnavox
3079
Maspro
3099
Matsui
3099
MegaCable
3117
3076,3122
Memorex
Minerva
3099
Mnet
3107
3025,3026,3084,
Motorola
3088, 3090, 3095,
3117
Movie Time
3077,3109
MrZapp
3101
Multichoice
3107
Multitech
3127
NEC
3064
NET Brazil
3085
Nokia
3097
3101
Noos
NSC
3077
Oak
3074
3006,3089,3121
Pace
Palladium
3099
3112,3118,3122
Panasonic
Paragon
3122
3068,3071,3079,
Philips
3099,3100,3101,
3103
3001,3006,3094,
Pioneer
3098,3114,3116,
3120
Popular Mechanics
3126
3066,3093
Proscan
Pulsar
3122
PVP Stereo Visual Matrix
3018
Quasar
3122
3123,3127
RadioShack
3030,3031,3087,
RCA
3118
Realistic
3070
Recoton
3126
Regal
3078
3075
Regency
Rembrandt
3066
Runco
3122
3101
Sagem
3069,3089,3114,
Samsung
3120
SAT
3098
Scientific Atlanta 3000,3001,3002,
3003, 3006, 3028,
3029,3081,3086,
3089, 3094, 3095,
3108
3072,3123
Signal
Signature
3066
3092,3125
Sony
Sprucer
3118
Standard Component
3115
3017,3072,3119,
Starcom
3123
3072,3123
Stargate
Starquest
3072,3123
Supercable
3090
3127
Supermax
Tele+1
Telepiu
Thomson
TlMEWARNER
Tocom
Torx
Toshiba
Tristar
Tudi
Tusa
TV86
Unika
United Cable
Universal
Universum
V2
Videoway
View Star
Viewmaster
Vision
Visiopass
Vortex View
Wittenberg
Zenith
Zentek
3107,3111
3107
3082,3091
3084
3067
3017
3122
3127
3102
3072,3123
3077
3065,3070
3018,3119
3065,3070
3097,3099
3127
3019
3074,3077,3079
3127
3127
3097,3100,3101
3127
3098
3113,3122,3124
3126
Satellite TV
AB Sat
AccessHD
ADB
AGS
Akai
Alba
AIdes
AIlsat
All sonic
Alltech
Alpha
Alpha Digital
Alphastar
Amitronica
Amstrad
Anglo
Ankaro
Anttron
Apollo
Armstrong
Artec
Asat
ASLF
Astacom
Astra
Astro
AudioTon
Aurora
Austar
Axiel
Axis
Best
Blaupunkt
Blue Sky
Boca
Boston
Brain Wave
Broadcast
Broco
4216,4217
4104
4220
4216
4053,4055
4001,4004,4006,
4007,4062,4217
4005,4007,4010
4048,4053,4055
4005,4008,4024
4217
4053
4104
4077
4217
4011,4035,4217,
4218
4217
4005,4008,4024,
4217
4001,4004
4001
4011,4053
4100
4053,4055
4217
4216
4009,4011,4054,
4217,4219
4004, 4008, 40 I0,
4015,4024,4213,
4218,4219
4004,4048
4222
4222
4216
4008,4009,4024,
4050
4008,4024
4015
4217
4011,4054,4059,
4217
4216
4013
4012
4217
4035,4041
4216
4217
4006,4045
4218
4213
4213
4099
4007, 4110
4075
4216
4212,4217
4006,4215,4219
4013
4010
4080, 4081, 4082,
4083,4086
4005
Commlink
4050
Comtech
4008,4024,4219
Condor
4014,4024
Connexions
4024,4215,4218,
Conrad
4219
Conrad Electronic 4217,4219
4050
Contec
4096
Cooisat
4048
Cosat
4109
Coship
4011
Crown
4014
Daeryung
4057,4217
Daewoo
4007
DDC
4007
Delega
Dew
4050
4051
Diamond
4219
Digiality
Digital Stream 4105
4056,4064,4067,
DIRECTV
4068,4070,4071,
4074,4107,4116,
4119,4121,4122,
4123,4127,4192,
4193,4194,4195,
4196,4197,4198,
4199,4200,4201,
4202, 4203, 4206,
4207,4221
Discoverer
4212
Discovery
4216
4216
Diseqc
Dish Network 4018,4065,4089,
4092, 4094, 4095,
4117
4018,4117
Dishpro
Distrisat
4053
4048
Ditristrad
4014,4053,4055
DNT
4072
Drake
DStv
4222
4024
Dune
4014,4018,4065,
Echostar
4089,4117,4217
4001,4005,4011,
Einhell
4217,4218
4216,4217
Elap
4010
Elekta
4217
Elsat
400 I, 4008, 4024,
Ella
4048,4053,4055
4001
Emanon
4008,4024
Emme Esse
Engel
4217
4006
Ep Sat
4031
EURIEULT
4052
Eurodec
BSkyB
BT
Bubu Sat
Bush
Cambridge
Canal Satellite
Canal+
CaptiveWorks
Channel Master
Chaparral
CHEROKEE
Chess
CityCom
Clatronic
CNT
Comag
4053,4218,4219
4219
4011
4024,4011,4008,
4215,4218,4219
4011,4215,4219
Eurostar
4217
Eutelsat
4001,4004
Exator
Expressvu
4117
4024,4212,4217
Fenner
4006,4052,4214
Ferguson
4218
Fidelity
4006
Finlandia
4006
Finlux
4050,4052
FinnSat
4217
Flair Mate
4222
Foxtel
4001,4049,4218
Freecom
FTEmaximal
4024,4217
4024,4001,4008,
Fuba
4014,4015,4055,
4215
4024,4005,4008,
Galaxis
4009, 4050, 4048,
4215,4222
4093,4066,4111,
GE
4197
Generallnstrument
4073,4019
4011
GMI
4117
GOI
4213
Goldbox
GoldStar
4049
4029,4002,4006
Goodmans
4111
Goodmind
4031
Grandin
4001,4049
Grothusen
4006,4004,4015,
Grundig
4035,4211,4218,
4222
Hansel & Gretel4219
4001,4013
Hamor
4010
Hanuri
Hauppauge
4044
4219
Heliocom
4219
Helium
4007
Hinari
4024,4015,4210,
Hirschmann
4218,4219,4216
Hisawa
4013
4016
Hisense
4114, 4006, 4199,
Hitachi
4203
4087,4084,4085
Homecast
4048
Houston
4117
HTS
4064,4068,4194,
Hughes
4192,4196,4202
Hughes Network Systems
4071
4097,4025,4030,
Humax
4060
4005,4011,4012,
Huth
4013,4050,4048,
4219,4223
4031
Hypson
4016
110
4031
Imex
Innovation
4008
4107
Insignia
4011
Intertronic
4048,4219
Intervision
4006
ITT Nokia
4019
Jerrold
4013
Johansson
Europa
Europhon
Eurosat
Eurosky
10K
4216
4048
4089,4065,4117,
4029
4217
Kamm
4015,4055,4053,
Kathrein
4063,4034,4042,
4215,4216,4217
Kathrein Eurostar 4215
4216
Klap
4219
Konig
4049
Kosmos
4004
KR
Kreiselmeyer 4015
4217
K-SAT
4001
Kyostar
L&S Electronic 4024
4024,4010,4008,
Lasat
4054,4215,4212,
4219
4108
Lasonic
4024,4001,4049,
Lenco
4215,4219,4217
4013
Leng
4048
Lennox
4218
Lenson
4053
Lexus
4103,4107,4049
LG
4024,4008,4212,
Lifesat
4217
4008
Lifetec
4219
Lorenzen
4049
Lorraine
4024,4008
Lupus
4218
Luxor
4052
Lyonnaise
4052
Macab
4127,4101
Magnavox
4031,4216,4217
Manata
4006, 40 I0, 4048,
Manhattan
4216
4055
Marantz
4010
Mascom
4006,4217
Maspro
4216
Matsui
4219
Max
4213
Mediabox
4011
Mediamarkt
4009,4213,4218
Mediasat
4024,4008,4217
Medion
4217
Medison
4055,4053
Mega
4127
Memorex
4031,4028,4001,
Metronic
4004,4005,4010,
4217
4015
Metz
4218,4219,4217
Micro electronic
Micro Technology 4217
4106
MicroGem
4024,4008
Micromaxx
4008
Microstar
4217
Microtec
4015
Minerva
4006,4015,4202
Mitsubishi
4054
Mitsumi
40 II, 4054, 4055,
Morgan's
4053,4217
4090,4091,4088,
Motorola
4019
4222
Multichoice
4212
Multitec
4049
Muratto
4217
Mysat
4013
Navex
JSR
JVC
viii
Neuhaus
Neusat
Next Level
NextWave
Nikko
Nokia
Nordmende
Nova
Novis
Oceanic
Octagon
Okano
Optex
Optus
Orbitech
OSat
Otto Versand
Pace
Pacific
Packsat
Palcom
Palladium
Pa1sat
Panasat
Panasonic
Panda
Pansat
Patriot
Paysat
PCT
Philco
Philips
Phoenix
Phonotrend
Pioneer
Polsat
Predki
Premiere
Priesner
Primestar
Profile
Promax
Prosat
Proscan
Protek
Proton
Provision
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA
Realistic
Redpoint
Redstar
RFr
Roadstar
ix
4009,4048,4218,
4219,4217
4217
4019
4223
4011,4217
4006,4040
4001,4006,4007,
4010,4052
4222
4013
4051
4001,4004,4050
4011
4048
4213,4222,4223
4001,4212,4213,
4218
4004
4015
4006,4015,4035,
4043,4047,4216
4051
4216
4007
4011,4218
4212,4218
4222
4121,4126,4124,
4006,4035,4036,
4221,4198
4006,4219
4125
4216
4127
4110
4101
4071,4068,4127,
4006, 4055, 4053,
4061,4033,4213,
4216,4196,4202,
4203,4201,4206
4050
4006,4005,4048
4046,4213
4052
4013
4048,4213
4011
4076
4216
4006
4007,4005
4093,4066,4122,
4197
4051
4016
4010
4024,4007,4005,
4008,4216
4015,4215,4219
4052
4019
4055,4053
4014,4037
4004
4093,4066,4112,
4113,4118,4119,
4116,4122,4197,
4207
4078
4009
4024,4008
4005,4055,4053
4217
Roch
Rover
Saba
4031
4024,4217
4010,4215,4219,
4216
Sabre
4006
Sagem
4023,4052
4050
Sakura
4064, 4071, 4069,
Samsung
4123,4120,4003,
4000,4001,4032,
4196,4200
4007,4218
SAT
Sat Cruiser
4223
4001,4004,4010,
Sat Partner
4013,4049,4218
Sat Team
4217
Satcom
4012,4219
Satec
4217
4024
Satelco
Satford
4012
Satmaster
4012
Satplus
4212
Schneider
4008,4212,4216
4051,4212,4219
Schwaiger
4215
SCS
4011,4009,4014
Seemann
4024,4001,4008,
SEG
4013
4048
Seleco
Servi Sat
4031,4217
Siemens
4015
Silva
4049
Skantin
4217
Skardin
4009
Skinsat
4218
SKR
4217
4017,4022,4005,
Skymaster
4212,4217
4055,4053
Skymax
4212,4218,4219,
SkySat
4217
Skyvision
4048
SM Electronic 4212,4217
4215,4217
Smart
4067,4070,4213
Sony
4011,4054
SR
4019
Star Choice
Starland
4217
Starring
4013
4001
Start Trak
4024,4001,4004,
Strong
4008,4049,4222
4115
STS
STVI
4031
Sumida
4011
Sunny Sound 4024
4217
Sunsat
4024, 4011, 4054
Sunstar
Supermax
4223
Tandberg
4052
Tandy
4004
Tantec
4006
4008
TCM
Techniland
4012
4021,4026,4027,
TechniSat
4014,4053,4038,
4039,4212,4213,
4218
4222
Technology
4223
Technosat
Technowelt
4219
4011,4054
Teco
Telanor
4007
4215,4219
Telasat
4217
Telecom
Telefunken
Te1eka
Telemaster
Te1esat
Te1estar
Televes
Telewire
Tempo
Tevion
Thomson
Thorens
Thorn
Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
Variosat
Vega
Ventana
Viewsat
Visiosat
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac
4017,4001,4216
4004,4011,4014,
4218,4219
4010
4219
4212,4213,4218
4006,4218
4048
4223
4008,4217
4020,4006,4052,
4058,4208,4215,
4213,4219,4216,
4217
4051
4006
4104
4196
4053
4006, 4012, 4048,
4218,4217
4194,4202,4203
4049
4218
4015,4215,4218,
4217
4217
4214
4031,4217
4222
4212
4070
4079,4127
4011,4050,4053
4013
4015,4215,4219
4016
4015
4024
4055,4053
4098
4013,4048,4216,
4217
4019
4001
4212
4212,4218
4006
4006
4013
4006,4014,4015,
4218,4219
4010
4216
4024
4217
4024,4010,4008,
4209,4215
4102,4107,4195
4004
CD player
Yamaha
5082,5095
CD recorder
Yamaha
5083
MD recorder
Yamaha
5080,5081,5086
Tape deck
Yamaha
5084,5087
LD player
Yamaha
2080
eYAMAHA
YAMAHA CORPORATION
© 2010 Yamaha Corporation
Printed in Malaysia
~
WV17360
·YAMAHA
Registering Your New Yamaha
. Product is Fast and Easy
Thank you for purchasing a new product from Yamaha Electronics.We'd like to
continue providing you with high quality products and better service. So, we've made
it simple to register your new product purchase online. Please take a few minutes to
visit our website at www.yamaha.comIYEC/registration/ and complete the
information and questions included there.We appreciate your business and we look
forward to hearing from you.
Failure to complete the registration form does not diminish your warranty rights in any way.
Product registration applies to USA customers only.
WF15740
.YAMAHA
LIMITED WARRANTY ON
HOME AUDIO PRODUCTS
Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha
Electronics Corporation, USA ("YAMAHA") is proud of the experience and craftsmanship that goes into each and every YAMAHA product. YAMAHA sells its
products through a network of reputable, specially authorized dealers and is pleased to offer you, the Original Owner, the following Limited Warranty, which
applies only to products that have been (1) directly purchased from YAMAHA's authorized dealers in the USA, including Puerto Rico (the "Warranted Area")
and (2) used exclusively in the Warranted Area. YAMAHA suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized
YAMAHA dealer or YAMAHA Customer Service if you have any questions.
THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR
WORKMANSHIP FOR THE NUMBER OF YEARS IDENTIFIED BELOW.
Warranty Term
Duration of Warranty from Date of
Purchase by or for the Original Owner
Type of Product
AN and Stereo Receivers, Processor and Integrated Amplifiers,
Separate Amplifiers and Preamplifiers, Tuners, CD Players and
Changers, HDD Players and Recorders, Network Players, Powered
Loudspeakers, Media Controllers and Speaker Systems purchased
individually, as a pair, or as part of an Integrated or Packaged System.
.....................2 years
Cassette Decks, Blu-ray Disc Players, DVD Players and Changers,
Integrated Systems (Receiver or Amplifier combined or on same
chassis with CD, DVD or Blu-ray Disc Player), Desktop Audio Systems
(i.e. TSX and PDX Series), Multimedia Speakers and Accessories.
.....................1 year
Coverage: YAMAHA will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to
conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials. Repairs may be
performed using new or refurbished parts that meet or exceed YAMAHA specifications for new parts. If YAMAHA elects to replace the product, the
replacement may be a reconditioned unit. You will be responsible for any installation or removal charges and for any initial shipping charges if the
product(s) must be shipped for warranty service. However, YAMAHA will pay the return shipping charges to any destination within the USA if the repairs
are covered by the warranty. This warranty does not cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse,
improper installation or operation or failure to follow instructions according to the Owner's Manual for this product; any shipment of the product (claims
must be presented to the carrier); repair or attempted repair by anyone other than YAMAHA or an authorized YAMAHA Service Center; (b) any unit which
has been altered or on which the serial number has been defaced, modified or removed; (c) normal wear, battery or battery replacement and any periodic
maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e)
damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; (f) RFI/EMI (Interference/noise) caused by
improper grounding or the improper use of either certified or uncertified equipment, if applicable; or (g) interference arising from the use of wireless
communication devices (e.g. 2.4 gHz cordless telephones), or other radio frequency emitting products such as microwave ovens, whether such
interference impairs the operation of the product or vice-versa. Consult the Owner's Manual for guidance on set-up procedures for minimizing the risks of
interference. Any evidence of alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This warranty covers only
the Original Owner and is not transferable.
In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted Area. Contact your
local authorized YAMAHA dealer who will advise you of the procedures to be followed. If this is not successful, contact YAMAHA at the address,
telephone number or website shown below. YAMAHA may request that you send the defective product to a local authorized YAMAHA Servicer or
authorize return of the defective product to YAMAHA for repair. For products requiring in-home service, contact your local authorized Yamaha dealer to
arrange for service. If you are uncertain as to whether a dealer has been authorized by YAMAHA, please contact YAMAHA's Service Department at the
number shown below, or check Yamaha's website at www.yamaha.com/yec. Product(s) shipped for service should be packed securely and must be
accompanied by a detailed explanation of the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other
dated, proof-of-purchase document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be
found ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon receipt of
payment or acceptable arrangement for payment.
Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE APPLICABLE PERIOD OF TIME SET
FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON
INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF
PERFORMANCES OR ANY CONSEQUENCES. YAMAHA'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT
OF THE PRODUCT, AT YAMAHA'S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only express
warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to assume for it any other express warranty.
If you have any questions about service received or if you need assistance in locating an authorized YAMAHA Servicer, please contact:
.YAMAHA
CUSTOMER SERVICE
Yamaha Electronics Corporation, USA
6600 Orangethorpe Avenue, Buena Park, California 90620-1373
Telephone: 800-292-2982
www.yamaha.com/yec
Do not return any product to the above address without a written Return Authorization issued by YAMAHA.
©2010 Yamaha Electronics Corporation, USA.
Effective: 04/01/10
WV34020