Samsung DVD-V 85 Instruction manual

00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 1
DVD-VCR
DVD-V 70
DVD-V 80
DVD-V 85
Instruction Manual
STANDBY/ON
OPEN/CLOSE
EJECT
STANDBY/ON
PROG
DVD
VCR
LINE2
OK
www.samsung.com.au
PAL
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 2
Contents
◆ FOREWORD
■
■
GB
Safety Instructions ................................................................................................................... 5
Disc Type and Characteristics ................................................................................................. 6
◆ DVD-VCR OVERVIEWS
■
■
■
■
■
Front View of the DVD-VCR ....................................................................................................
Rear View of the DVD-VCR .....................................................................................................
Infrared Remote Control ..........................................................................................................
Display Indicators.....................................................................................................................
Accessories..............................................................................................................................
7
8
9
11
11
◆ CONNECTING YOUR DVD-VCR
■
■
■
■
■
■
■
■
■
■
■
Deciding How to Connect DVD-VCR .......................................................................................
Connecting DVD-VCR to the TV using the Coaxial Cable .......................................................
Connecting DVD-VCR to the TV using the RCA Cable ...........................................................
Connecting DVD-VCR to a Satellite Receiber or Other Equipment .........................................
Plug & Auto Set Up ..................................................................................................................
Tuning Your Television for the DVD-VCR................................................................................
Deck Control Keys ...................................................................................................................
Basic TV Tuner Operations......................................................................................................
Inserting Batteries in the Remote Control ................................................................................
Setting the Date and Time .......................................................................................................
Setting the Menu Language .....................................................................................................
12
13
13
14
15
16
17
18
19
19
20
◆ SETTING UP YOUR DVD-VCR
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
2
Presetting the Stations Automatically ......................................................................................
Presetting the Stations Manually .............................................................................................
Clearing a Preset Station .........................................................................................................
Changing the Preset Station Table ..........................................................................................
Selecting the RF OUT Sound Mode (B/G-D/K) (Newzealand Model only)..........................................
Setting the DVD-VCR Output Channel ...................................................................................
Selecting the Colour Mode.......................................................................................................
NICAM (Newzealand Model only) ................................................................................................
Intelligent Picture Control .........................................................................................................
Intelligent Picture Control (Remote Control) ............................................................................
G-CODE Extend ......................................................................................................................
Auto Power off .........................................................................................................................
Screen Message ......................................................................................................................
Selecting the Cassette Type ....................................................................................................
Repeat Play .............................................................................................................................
S-VHS Play ..............................................................................................................................
21
22
23
24
25
25
26
27
28
28
29
29
30
30
31
31
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 3
Contents
◆ RECORDING TELEVISION BROADCASTS
■
■
■
■
■
■
■
■
■
Selecting the Recording Speed.................................................................................................
Protecting a Recorded Cassette ...............................................................................................
Recording a Programme Immediately.......................................................................................
Recording a Programme with Automatic Stop ..........................................................................
Using the G-CODE Feature ......................................................................................................
Modifying G-CODE Programming .............................................................................................
Using the Timer Programming Feature .....................................................................................
Checking a Preset Recording ...................................................................................................
Cancelling a Preset Recording.................................................................................................
32
33
33
34
35
36
37
38
38
◆ PLAYING BACK
■
■
■
■
■
■
■
■
■
■
■
■
Playing a Cassette ....................................................................................................................
Adjusting Picture Alignment Manually .......................................................................................
Selecting the Audio Output Mode .............................................................................................
Playing a Cassette in Slow Motion ............................................................................................
Playing a Sequence Frame by Frame.......................................................................................
Playing a Sequence at Variable Speeds ...................................................................................
Searching for a Specific Sequence ...........................................................................................
Using the Tape Counter ............................................................................................................
Connecting an RCA Audio/Video Input Cable...........................................................................
Using the Assemble Edit Function ............................................................................................
Recording from Another VCR or Camcorder ............................................................................
Using the TV Buttons on the Remote Control ...........................................................................
39
39
40
40
41
41
42
44
45
46
46
47
◆ DVD FUNCTIONS
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Choosing a Connection .............................................................................................................
Setting Up the Language Features.................................................................................................
Setting Up the Audio Options.........................................................................................................
Setting Up the Display Options ......................................................................................................
Setting Up the Parental Control .....................................................................................................
A/V Receiver Connections ............................................................................................................
Special Playback Features ............................................................................................................
Adjusting the Aspect Ratio (EZ View) .............................................................................................
Using the Display Function............................................................................................................
Changing the Camera Angle .........................................................................................................
Selecting the Subtitle Language.....................................................................................................
Repeat Play.................................................................................................................................
Selecting the Audio Language .......................................................................................................
Using the Mark Function ...............................................................................................................
MP3/WMA Play............................................................................................................................
Program Play & Random Play .......................................................................................................
Picture CD Playback.....................................................................................................................
48
49
51
52
53
54
55
56
58
59
59
60
61
62
63
65
66
3
GB
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 4
Contents (cont.)
◆ SOLVING PROBLEMS
■
■
GB
■
Technical Specifications ....................................................................................................... 68
Problems and Solutions (VCR) ............................................................................................. 69
Troubleshooting Guide (DVD) .............................................................................................. 70
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Symbols
1
Press/push
1 = Step number
4
1
Hold down
☛
➢
Important
Note
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 5
Safety Instructions
The following illustrations represent precautions.
GB
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
10%
75%
40°C
H
H
5°C
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
5
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 6
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types
(Logos)
GB
Recording Disc Size
Types
DVD
12 Cm
Audio
+
Video
8 Cm
VIDEO-CD
12 Cm
Audio
+
Video
AUDIO-CD
Max.
Playing
Time
Characteristics
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
74 min.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
Disc Markings
~
• Playback
Region
Number
PAL
• PAL colour system
in Australia,
Newzealand, etc.
NTSC
STEREO
• NTSC broadcast • Dolby
• Stereo
system in USA,
Digital disc
disc
Canada, japan,
South Korea, etc.
DIGITAL
SOUND
• Digital
Audio disc
• DTS disc
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 7
Front View of the DVD-VCR
( DVD -V70 )
STANDBY/ON
BUTTON
DVD DECK
REW /SKIP BACK
BUTTON
OPEN/CLOSE
BUTTON
VCR SELECT BUTTON
VIDEO CASSETTE
COMPARTMENT
EJECT BUTTON
RECORD
BUTTON
DVD SELECT BUTTON
GB
PROG
STANDBY/ON
STOP BUTTON PLAY/STILL F.F / SKIP NEXT EZ VIEW BUTTON
BUTTON
BUTTON
DVD
LINE2
VCR
PROGRAMME
SELECTION BUTTON
LINE2 VIDEO
INPUT JACK
LINE2 AUDIO L, R
INPUT JACK
( DVD -V80 )
STANDBY/ON
BUTTON
DVD DECK
REW /SKIP BACK
BUTTON
OPEN/CLOSE
BUTTON
VCR SELECT BUTTON
VIDEO CASSETTE
COMPARTMENT
EJECT BUTTON
RECORD
BUTTON
DVD SELECT BUTTON
EJECT
PROG
STANDBY/ON
STOP BUTTON PLAY/STILL F.F / SKIP NEXT EZ VIEW BUTTON
BUTTON
BUTTON
DVD
LINE2
VCR
PROGRAMME
SELECTION BUTTON
LINE2 VIDEO
INPUT JACK
LINE2 AUDIO L, R
INPUT JACK
( DVD -V85 )
STANDBY/ON
BUTTON
DVD DECK
REW /SKIP BACK
BUTTON
OPEN/CLOSE
BUTTON
RECORD
BUTTON
STANDBY/ON
STOP BUTTON PLAY/STILL F.F / SKIP NEXT EZ VIEW BUTTON
BUTTON
BUTTON
VCR SELECT BUTTON
VIDEO CASSETTE
COMPARTMENT
EJECT BUTTON
DVD SELECT BUTTON
PROG
DVD
PROGRAMME
SELECTION BUTTON
VCR
LINE2
LINE2 VIDEO
INPUT JACK
LINE2 AUDIO L, R
INPUT JACK
7
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 8
Rear View of the DVD-VCR
( DVD -V70 )
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
GB
LINE IN 1
RF ANTENNA INPUT
COMPONENT
VIDEO OUT
S-VIDEO OUT
JACK
LINE OUT TO TV
(COMPOSITE)
RF OUT TO TV
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
( DVD -V80 / DVD -V85)
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
LINE IN 1
COMPONENT
VIDEO OUT
S-VIDEO OUT JACK
LINE OUT TO TV
(COMPOSITE)
DIGITAL AUDIO OUT
SOCKET (OPTICAL)
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
8
RF ANTENNA INPUT
RF OUT TO TV
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 9
Infrared Remote Control
( DVD -V70 )
STANDBY/ON
OPEN/CLOSE
1
18
1
2
3
4
5
6
7
2
19
20
3
21
4
5
22
6
23
7
24
25
8
9
26
10
11
12
13
14
15
16
17
OK
27
28
29
30
31
32
33
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
GB
STANDBY/ON
SHUTTLE << / >>
CLEAR
DVD, VCR SELECT
AUDIO
TRK TX
REWIND
SKIP BACK
STOP
SUBTITLE
MENU
UP
LEFT
DOWN
SPEED SP/LP
RECORD
TIMER
ANGLE
IPC
OPEN/CLOSE
0-9
TV/VCR
INPUT SEL.
F.ADV/STEP
PROG
FAST-FORWARD
SKIP NEXT
PLAY/STILL
INFO.
RETURN
RIGHT
OK
EZ VIEW
DISC MENU
MARK
SEARCH
MODE
REPEAT
9
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 10
Infrared Remote Control
( DVD -V80 / DVD -V85)
GB
STANDBY/ON
OPEN/CLOSE
1
18
1
2
3
4
5
6
7
2
19
20
3
4
21
5
22
6
23
7
24
25
8
9
13
14
15
16
17
10
18
19
20
21
22
23
26
24
10
11
12
8
9
10
11
12
13
14
15
16
17
OK
27
28
29
30
31
32
33
25
26
27
28
29
30
31
32
33
STANDBY/ON
SHUTTLE << / >>
CLEAR
DVD
TV MUTE. AUDIO
VOLUME +/–
REWIND
SKIP BACK
STOP
SUBTITLE
MENU
UP
LEFT
DOWN
SPEED SP/LP
RECORD
TIMER
ANGLE
IPC
OPEN/CLOSE
0-9
TV/VCR
VCR, TV SELECT
INPUT SEL.
F.ADV/STEP
PROG
TRACKING
FAST-FORWARD
SKIP NEXT
PLAY/STILL
INFO.
RETURN
RIGHT
OK
EZ VIEW
DISC MENU
MARK
SEARCH
MODE
REPEAT
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 11
Display Indicators
1
2
3
4
5
GB
STEREO
6
7
8
1
The DVD Deck is active
6
A DVD with a DTS soundtrack is loaded
2
A DVD, CD, VCD, or SVCD is loaded
7
The Hi-Fi track of a VHS tape is playing
3
The time, counter position, time remaining or
current deck status is displayed
4
VHS tape is inserted
5
The VCR Deck is active
(The current TV show or video is broadcast in
Stereo)
8 A Timer Recording is programmed or in progress.
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
/ON
DBY
STAN
E
/CLOS
OPEN
11
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 12
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
GB
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
Direction
LINE 1
Rear
Audio/Video RCA
Audio output
Rear
Audio RCA
Out
LINE 2
Front
LINE 2
Audio/Video
In
In/Out
Recommended Use
◆ Television
◆ Other VCR
◆ Audio out (DVD only)
◆ Audio in
Video in
COMPONENT Rear
output
RCA
Out
◆ COMPONENT out (DVD only)
S-VIDEO
output
Rear
S-JACK
Out
◆ S-Video out (DVD only)
Digital AUDIO
output
Rear
Optical★(DVD-V80/ DVD-V85) Out
coaxial
◆ Digital Audio out (DVD only)
OUT TO TV
Rear
75 Ω
◆ Television
Out
coaxial
IN FROM ANT. Rear
75 Ω
coaxial
In
◆ Aerial
◆ Cable television network
◆ Satellite receiver
☛
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
12
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 13
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆
◆
◆
◆
☛
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
GB
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
2
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75Ω coaxial socket marked
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the
DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
TV
on the
socket on your
TV
4
3
Connecting DVD-VCR to the TV using the RCA Cable
Aerial
TV
3
2
RF coaxial cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆ Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
13
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 14
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
GB
➢
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
Camcorder
VCR
REAR OF THE DVD-VCR
14
Sound system
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 15
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 13.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The Language Set menu is displayed.
3
Select the required language by pressing the › or ‚ buttons.
4
Press OK to store the language selected.
Result:
A message appears.
5
Press OK button.
6
TV
GB
2
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
◆
➢
Auto preset can be performed by pressing ■ (STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
Auto setup
Please wait
00 %
Clock Set
Time
Date
12 : 00
1/JAN
Year
2003 WED
15
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 16
Tuning Your Television for the DVD-VCR
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
GB
STANDBY/ON
➢
OPEN/CLOSE
To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
2
4
16
1
Switch on the television.
2
Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3
Select a programme position on the television to be reserved for
use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press ŠII button.
5
Start a scan on your television or set the television to UHF
channel 36 (Australia:UHF 38 CH).
6
Fine tune the television until the pictures and sound are obtained
clearly.
7
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 25 and Problems and Solutions on page
69).
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
That programme is now reserved for use with your
Result:
DVD-VCR.
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 17
Deck Control Keys
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1
2
3
4
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
INPUT SEL. BUTTON
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (PR##), Line 1 (rear AV
input), and Line 2 (front AV input).
• Input select is only available when the VCR deck is selected.
➢
GB
STANDBY/ON
STANDBY/ON
1
1
2
3
4
Before using the VCR operation of 21~47 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 48~67 pages, press
the DVD button on the remote control to select and
watch DVD.
17
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 18
Basic TV Tuner Operations
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
GB
1
2
2
3
4
OK
18
1
TV/VCR Button
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
2
PROG
Button
Press to change to the next or previous channel.
3
0-9 Buttons
Press to select channels directly.
4
INFO.
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 19
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1
GB
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AAA, RO3 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆ You purchase the DVD-VCR
☛
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
After pressing the MENU, press the OK or Š .
The Setup menu is displayed.
Result:
2
Press the corresponding
option.
3
Press the OK or Š to select this option.
Result:
The Clock Set menu is displayed.
4
Press ¥ or Š to select the hour, minutes, day, month and year.
Result:
The option selected highlight.
5
Press the › or ‚ buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
➢
6
›,‚
buttons to select the Clock
Clock Set
Time
12 : 00
Date
Year
1 / JAN / 2003 WED
You can hold the › or ‚ buttons down to scroll more
quickly through the values.
On completion, press RETURN to exit the menu.
19
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 20
Setting the Menu Language
1
Open “MENU”
After pressing the MENU, press the OK or Š .
GB
1
OK
2
Select “Language”
Use the › or ‚ buttons to highlight
“Language,” then press the OK or Š .
3
Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
Language Set
English
Français
Deutsch
Español
Italiano
Nederlands
20
4
Press the › or ‚ buttons to select language you want.
Place the selection arrow next to your desired Language, then
press the OK button.
5
On completion, press RETURN to exit the menu.
00169N DVD-V70/XSA-GB1
11/14/05
9:51 AM
Page 21
VCR
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 15).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can be
done:
◆ Plug & Auto Set up (see page 15)
◆ Automatically
◆ Manually (see page 22)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding ›, ‚ buttons to select the Install
option.
3
Press the OK or Š to select this option.
Result:
The Install menu is displayed.
4
Press the corresponding › or ‚ buttons, until the Auto Setup
is selected.
And then press the OK or Š to select this option.
A message appears, indicating that any channels
Result:
already preset on your DVD-VCR will be deleted.
5
6
Press OK button.
A message appears, indicating that any channels
Result:
already preset on your VCR will be deleted.
Press OK to start the auto scanning.
Result:
◆ The Please Wait indication highlight on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
7
➢
The number of stations automatically stored by the DVDVCR depends on the number of stations that it has found.
GB
Australia Model
Install
Auto Setup
Manual Setup
VCR Output CH
: CH 38
Newzealand Model
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
:G
: CH 36
Auto Setup
Your date will be lost
Press OK to continue
Menu to exit
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the ones
no longer required (see page 23).
Auto Setup
Please Wait
15%
21
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 22
Presetting the Stations Manually
☛
GB
You do not need to preset the stations manually if you
have already set them automatically.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or Š to select this option.
The Install menu is displayed.
Result:
›,‚
buttons to select the Install
Australia Model
4
Auto Setup
Manual Setup
VCR Output CH
TV STATION TABLE
PR
CH
buttons, until the Manual
Press the › or ‚ buttons to select a programme number as
required.
7
Press the Šbutton to preset the station.
Result:
The MANUAL TUNING menu is displayed.
8
Press the ¥ or Š buttons to start scanning channel.
Result:
The frequency band is scanned and the first station
found is displayed.
9
Press the › or ‚ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10
To change the programme’s name, press the Šbutton.
The first letter of the name flashes.
Result:
11
To...
Then...
Select a character
in the name
Press the › or ‚ button until the
required character is displayed
(letters, numbers or “-” character).
Move to the next or
previous character
Press the Š or ¥ buttons
respectively.
12
If you...
Then...
Wish to store the
station displayed
◆
NAME
1
2
◆
3
4
5
◆
SWAPPING : OK
RETURN
DELETE : CLEAR
Do not wish to
store the station
displayed
◆
◆
MANUAL TUNING
PR
:
CH
: --
MFT
: -
NAME
: ----
◆
MEMORY : OK
RETURN
22
‚
6
Install
:G
: CH 36
or
Press the OK or Š to select a Manual Setup option.
Result:
The TV STATION TABLE menu is displayed.
Newzealand Model
Manual Setup
TV System
VCR Output CH
›
5
: CH 38
Auto Setup
Press the corresponding
Setup option is selected.
Install
Press the › or ‚buttons until the MFT
is selected.
Press the ¥ or Š buttons to adjust the
picture, if necessary.
Press OK to store the station
Press the › or ‚ buttons until the CH
is selected.
Press the ¥ or Š buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 14
13
Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14
On completion, press the RETURN button three times to exit the
menu.
n
y
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 23
VCR
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
GB
you can cancel it.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding ›, ‚ buttons to select the
option.
3
Install
Australia Model
Press the OK or Š to select this option.
Result:
The Install menu is displayed.
Install
Auto Setup
4
Press the corresponding
Setup option is selected.
5
Press the OK or Š to select a Manual Setup option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the corresponding › or ‚ buttons, until the required preset
TV station (PR) is selected.
7
Press the CLEAR button.
8
Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9
›
or
‚
Manual Setup
VCR Output CH
buttons, until the Manual
: CH 38
Newzealand Model
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
On completion, press the RETURN button four times to exit the
menu.
:G
: CH 36
TV STATION TABLE
PR
CH
1
21
NAME
2
3
4
5
DELETE : CLEAR
SWAPPING : OK
RETURN
23
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 24
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
GB
Australia Model
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or Š buttons to select this option.
Result:
The Install menu is displayed.
4
Press the corresponding
Setup option is selected.
5
Press the OK or Š button to select this option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the corresponding › or ‚ buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
8
Press the › or ‚ buttons to select required position.
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
›,‚
buttons to select the Install
Install
Auto Setup
Manual Setup
VCR Output CH
Install
Auto Setup
Manual Setup
TV System
VCR Output CH
:G
: CH 36
TV STATION TABLE
PR
CH
NAME
1
21
----
2
3
4
5
SWAPPING : OK
RETURN
TV STATION TABLE
PR
CH
NAME
21
----
1
2
3
4
5
DELETE : CLEAR
24
or ‚ buttons, until the Manual
: CH 38
Newzealand Model
DELETE : CLEAR
›
SWAPPING : OK
RETURN
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 25
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
VCR
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
GB
2
Press the corresponding
option.
3
Press the OK button to select this option.
Result:
The Install menu is displayed.
4
Press the › or ‚ buttons, until the TV System option is
selected.
›,‚
buttons to select the Install
Install
5
Press the ¥ or Š button to select G or K.
6
On completion, press RETURN to exit the menu.
Auto Setup
Manual Setup
TV System
VCR Output CH
G
:G
: CH 36
K
VCR
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or Š to select this option.
Result:
The Install menu is displayed.
›,‚
buttons to select the Install
Australia Model
Install
Auto Setup
Manual Setup
VCR Output CH
4
Press the › or ‚ buttons, until the VCR Output CH option is
selected.
5
Select the required output channel (CH21~CH69) by pressing the
OK or Š buttons (Australia:CH28 ~ CH69).
CH28
. . CH38
. . CH69
CH:28
:
CH:38
:
CH:69
: CH 38
Newzealand Model
(Australia Model)
Install
CH21
6
. . CH36
. . CH69
Auto Setup
(Newzealand Model)
Manual Setup
TV System
VCR Output CH
CH:21
:
CH:36
:
CH:69
:G
: CH 36
On completion, press RETURN to exit the menu.
Then tune your television again (see page 16).
25
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 26
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
➢
GB
◆
When you playback an NTSC-recorded tape on this DVDVCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
DVD-V80/ DVD-V85
NT4.43 and you can record NT4.43.
Australia Model
User Set
Colour System
: Auto
IPC
G-Code Extend
: On
: Off
Auto
PAL
MESECAM
B/W
Newzealand Model
User Set
Colour System
: Auto
NICAM
IPC
G-Code Extend
: On
: On
: Off
Auto
PAL
MESECAM
B/W
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding ›, ‚ buttons to select the
User Set option.
3
Press the OK or Š to select this option.
Result:
The User Set menu is displayed.
4
Press the corresponding › or
System option is selected.
5
Press the OK or Š button to select Auto ➝ PAL➝ MESECAM
➝ B/W.
B/W
6
DVD-70
Australia Model
User Set
Colour System
: Auto
IPC
: On
Newzealand Model
User Set
26
Colour System
: Auto
NICAM
IPC
: On
: On
‚
buttons, until the Colour
Black and White
On completion, press RETURN three time to exit the menu.
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 27
VCR
NICAM (Newzealand Model only)
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
GB
Please refer to page 40.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or Š to select this option.
Result:
The User Set menu is displayed.
›,‚
buttons to select the User Set
User Set
4
Press the corresponding › or
is selected.
5
To...
Press OK or Š, until...
Mono mode
Off is displayed.
‚
buttons, until the NICAM option
Colour System
NICAM
IPC
G-Code Extend
: Auto
On
Off
: On
: On
: Off
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode
6
On is displayed.
On: Normally set at this position.
On completion, press RETURN three times to exit the menu.
27
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 28
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
GB
Australia Model
1
During playback, press the MENU button on the remote control.
The Setup menu is displayed.
Result:
2
Press the OK or Š .
Result:
The Setup menu is displayed.
3
Press the corresponding ›, ‚buttons to select the
User Set option.
4
Press the OK or Šbuttons to select this option.
Result:
The User Set menu is displayed.
5
Press the corresponding › or ‚ buttons, until the IPC option is
selected.
6
Press the OK or Šbuttons to select the IPC (intelligent picture
control) option.
➢ When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the ‚ button to turn the
IPC mode OFF.
8
Press the ¥ or Š buttons until the picture is displayed according to
your preferences.
User Set
Colour System
: Auto
IPC
G-Code Extend
: On
: Off
On
Off
Newzealand Model
➢
User Set
Colour System
: Auto
NICAM
IPC
G-Code Extend
: On
: On
: Off
VCR
On
Off
9
On completion, press the RETURN button again.
Intelligent Picture Control ( Remote Control )
1
During playback, press the IPC button.
The PICTURE menu is displayed.
Result:
2
Press the ‚ button to turn the IPC (Intelligent Picture Control)
option ON and OFF.
OK
➢
1
When Intelligent Picture Control mode is ON, the sharpness
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF.
◆ The horizontal picture adjusting appears.
4
Press the ¥ or Š buttons until the picture is displayed according to
your preferences.
➢
5
28
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the IPC button again.
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 29
G-CODE Extend ★(DVD-V80/DVD-V85 Only)
VCR
To prevent delays or over-runs the VCR has a function called GCODE EXTEND allowing you to extend the recording time by up to
60 minutes.
1
After pressing the MENU, press the OK or Š .
2
Press the corresponding ›, ‚ buttons to select the User Set
option.
3
Press the OK or Šbuttons to select this option.
Result:
The User Set menu is displayed.
4
GB
Australia Model
Press the corresponding › or ‚ buttons, until the
G-Code Extend option is selected.
User Set
Colour System
5
Press the OK or Š buttons to set the G-Code Extend time by
increments of 10 minutes.
6
To turn off, press OK or Š buttons repeatedly until Off shows.
IPC
G-Code Extend
: Auto
Off
10
20
30
40
50
60
: On
: Off
Newzealand Model
User Set
Colour System
NICAM
IPC
G-Code Extend
: Auto
: On
: On
: Off
Off
10
20
30
40
50
60
VCR
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding › or ‚ buttons, until the Auto Power
Off option is selected.
3
Press the OK or Šbuttons, until you select the time of Auto Power
Off interval.
Off
4
1Hour
2Hour
3Hour
On completion, press RETURN twice to exit the menu.
Language
: English
Install
User Set
Auto Power Off
Screen Messages
Off
1Hour
2Hour
3Hour
: Off
: On
29
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Screen Messages
Language
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the SEARCH, Programming MENU and
Timer functions, which cannot be hidden).
: English
Install
GB
Page 30
User Set
Auto Power Off
Screen Messages
: Off
: On
On
Off
1
After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2
Press the corresponding › or ‚ buttons, until the Screen
Messages option is selected.
3
To...
4
VCR
Press OK or Š, until...
Display on-screen information
On is displayed.
Hide on-screen information
Off is displayed.
On completion, press RETURN twice to exit the menu.
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
VCR Setup
Tape Select
: E180
Repeat Play
S-VHS
: Off
: Off
E180
E240
E260
E300
1
After pressing the MENU press the corresponding
to select the VCR option.
2
Press the OK or Š buttons to select this option.
Result:
The VCR Setup menu is displayed.
3
Press the corresponding
Select option is selected.
4
Press the OK or Š buttons as many times as required, until the
correct cassette length is displayed.
E180
E 300
5
30
›
or
‚
E240
E260
Press RETURN twice to exit the menu.
›,‚
buttons
buttons, until the Tape
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 31
VCR
Repeat Play
You can set repeat play to repeat the tape continuously from
beginning to end.
1
After pressing the MENU, press the corresponding
to select the VCR option.
2
Press the OK or Šbuttons to select this option.
Result:
The VCR Setup menu is displayed.
3
Press the corresponding
Play option is selected.
4
To...
5
›
or
‚
›,‚
buttons
GB
buttons, until the Repeat
Press OK or Š, until...
Repeat play
On is displayed.
Do not wish to repeat play
Off is displayed.
VCR Setup
Tape Select
: E180
Repeat Play
S-VHS
: Off
: Off
Off
On
On completion, press RETURN twice to exit the menu.
VCR
S-VHS Play
The DVD-VCR allows you to playback high quality S-VHS tapes.
1
During S-VHS play mode after pressing the MENU press the
corresponding ›, ‚ buttons to select the VCR option.
2
Press the OK or Š button to select this option.
Result:
The VCR Setup menu is displayed.
3
Press the corresponding › or ‚ buttons, until the S-VHS option
is selected.
4
To...
Press OK or Š, until...
S-VHS play
On is displayed.
Tape Select
: E180
Do not wish to S-VHS play
Off is displayed.
Repeat Play
S-VHS
: Off
: Off
VCR Setup
5
Off
On
On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to On in the VCR
Setup.
31
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 32
Selecting the Recording Speed
You can record a cassette at two different speeds:
GB
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
OK
32
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SP is displayed.
LP is displayed.
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 33
VCR
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
2
If you wish to protect a cassette, break off the tab using a small
screwdriver.
GB
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
1
VCR
Recording a Programme Immediately
Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 21 and 22.
4
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG ( or ) buttons
or
4
OK
6
◆
The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source
The station number is displayed and the programme
Result:
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 32).
6
Hold REC ( ●) down for a while to start recording.
The record indicator appears on the television and
Result:
DVD-VCR display. An index is recorded on the tape
(see page 42).
7
➢
To stop recording, press ■ once.
5
7
OK
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
33
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 34
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
GB
EJECT
PROG
STANDBY/ON
DVD
LINE2
VCR
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG ( or ) buttons
or
3
4
4
◆
The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source
The channel number is displayed and the programme
Result:
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 32).
6
Hold the REC button (●) down for a while to start recording.
The record indicator appears on the television screen
Result:
and DVD-VCR display. An index is recorded on the
tape (see page 42).
7
Press the REC button ( ●) several times to increase the
recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours
The length is displayed on the television displays. The
Result:
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically and power off.
8
If you wish to cancel the recording before the end, press
STANDBY/ON.
OK
6
5
LENGTH 2:30
SET LENGTH :
PRESS REC ●
☛
☛
34
If the end of the tape is reached while recording:
◆ The recording stops and power off.
This function is not available in DVD recording
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Using the G-CODE Feature
Page 35
★ (DVD-V80/
VCR
DVD-V85 Only)
OK
Before presetting your DVD-VCR:
◆ Switch on both the television and your DVD-VCR
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
GB
1
Up to six programmes can be preset.
1
Timer Method
Press the TIMER button.
The TIMER METHOD is displayed.
Result:
2
Press the corresponding › or ‚ buttons, until the G-Code option
is selected.
3
Press the Šbutton to select G-Code.
A message is displayed to allow you to enter the
Result:
G-Code code.
☛
4
G-Code
★ (DVD-V70)
Timer Method
Press the numeric buttons to enter the code opposite the pro
gramme that you wish to record in your television magazine.
➢
5
If all six programmes have been set, the message Timer
is Full is displayed. Refer to page 38 if you wish to
cancel a preset recording.
Standard
If you want to set
the timer program,
press the
key.
If you wish to correct the G-Code code that you are
entering:
◆ Press the ¥ button until the digit to be corrected is
cleared
◆ Enter the correct digit
Press the OK button.
The information concerning the programme is displayed.
Result:
☛
When using the G-Code function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the › or ‚ buttons. Refer to the following page if:
◆ The programme number or times flash
◆ You wish to modify the programme
6
If the programme and times are correct, press the RETURN button.
7
Press the STANDBY/ON button to activate the timer.
8
Refer to page 38 if you wish to:
◆ Check that your VCR has been programmed correctly
◆ Cancel a preset recording
☛
G-Code
The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
Code
Code
Correct
STANDBY/ON
: 0-9
:
OPEN/CLOSE
7
35
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 36
Modifying G-CODE Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
GB
If you wish to...
Then...
Select an input source other
than the tuner (LINE IN 1 or LINE IN 2)
◆ Press the ¥ or Š buttons, until the PR selection flashes.
◆ Press the INPUT SEL. button one or more times to change the
input source selection.
The programme number is replaced by:
Result:
• The LINE IN 1 or LINE IN 2 source using the
➢
Record a programme every day
(Monday to Sunday) at the same time
INPUT SEL. button for a satellite tuner or
external video source
The input source must be selected before changing any
other value.
◆ Press the ¥ or Š buttons, until the DAY selection flashes.
◆ Press the › or ‚ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week
on the same day and at the same time
◆ Press the ¥ or Š buttons, until the DAY selection flashes.
◆ Press the › or ‚ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time
◆ Press the ¥ or Š buttons, until the STOP selection flashes.
◆ Press the › or ‚ buttons to increase or decrease the stop
time.
Select the recording speed
◆ Press the ¥ or Š buttons, until the recording speed selection
flashes.
◆ Press the › or ‚ buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 37
• SP (Standard Play)
• LP (Long Play)
36
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 37
VCR
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Timer Method
Standard
G-Code
GB
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
The TIMER PROGRAMMING menu is displayed.
Result:
2
Press Što select the input source.
3
Select the required station by pressing the ›, ‚ buttons or
INPUT SEL. to select the LINE1, LINE2 input sources.
4
Press Š to select the recording day.
5
Select the required day by pressing the › or ‚ buttons.
6
Press Š to select the recording start time.
7
Select the required hour value by pressing the › or ‚ buttons.
8
Press Š to select the minutes.
9
Select the required minute value by pressing the › or ‚ buttons.
10
Press Š to select the recording stop time.
11
Select the required recording stop time by pressing the › or ‚
buttons, following the same procedure as when selecting the
recording start time.
12
Press Š to select the recording speed.
13
Press the › or ‚ buttons to select the SP (Standard Play), LP
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
14
15
When you have finished, press the RETURN button.
STANDBY/ON
OPEN/CLOSE
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
37
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 38
Checking a Preset Recording
You can check your preset recordings:
◆ When you have finished presetting the DVD-VCR
◆ If you have forgotten which programmes will be
recorded
GB
VCR
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the OK button to select Standard option.
Result:
The TIMER PROGRAMMING menu is displayed.
3
Press the › or ‚ buttons to select the required programme.
4
Press the ¥ or Š buttons to select and change any values as
required. For more details, refer to the previous page.
5
On completion, press RETURN twice.
Cancelling a Preset Recording
You can cancel any programmes that are:
◆ Incorrect
◆ No longer required
4
38
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the OK button to select Standard option.
Result:
The TIMER PROGRAMMING menu is displayed.
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the CLEAR button to cancel the selected programme.
All the recording information is deleted and the broadResult:
cast will not be recorded.
5
On completion, press RETURN twice.
›
or ‚
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 39
VCR
Playing a Cassette
This function allows you to play back any pre-recorded cassette.
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press Šll.
Otherwise, the cassette is played automatically.
➢
3
GB
2
3
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
To...
Then press...
Stop the playback
■ (STOP).
O
EJECT
Eject the cassette
(EJECT).
Adjusting Picture Alignment Manually
3
LINE2
VCR
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK ( or ) buttons until the picture is clear
and stable.
Result:
◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
39
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 40
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
GB
Option
L
LR
R
MIX
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO
Used to listen to the sound on the normal mono channel.
LR
Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
MONO
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
VCR
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
➢
1
Press:
◆
1
1
◆
◆
2
2
Šll to start playing the cassette
Šll button one more time to make still mode.
◆
ŠŠ to start SLOW mode.
ŠŠ or ¥¥ button as many times as required to decrease or
◆
increase the speed respectively
To return to the normal speed, press the Šll button twice.
When playing back in slow motion, picture interference may occur.
Press the TRK ( or ) buttons to minimize this effect.
☛
2
No sound is heard when playing back a cassette in slow
motion.
When you have been using the Slow Motion function for
more than about two minutes, the DVD-VCR will
automatically play to protect the:
◆ Cassette
◆ Video heads
40
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 41
VCR
Playing a Sequence Frame by Frame
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
➢
1
GB
No sound is heard when playing back frame by frame.
Press:
◆
Šll to start playing the cassette
Šll button one more time to make still mode.
◆
F.ADV/STEP (
◆
1
) to advance frame by frame
To return to normal playback, press Šll.
2
➢
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
(
,
) buttons to minimize this effect.
VCR
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
You wish to analyze a sportsperson’s technique,
Example:
movement by movement.
The Shuttle function is available on the Remote control
➢
1
Press:
◆
◆
◆
2
No sound is heard when playing a sequence at variable
speeds.
Šll during playback
1
1
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE
PLAY
PLAY
PLAY
X9
X5
X3
STILL
SLOW
MOTION
X1/10
SLOW
MOTION
X1/5
PLAY
PLAY
X3
PLAY
X5
PLAY
X9
41
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 42
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
OK
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
GB
➞
1
etc.
Prev
Seq. being
Next
Seq.
played
Seq.
2
➢
1
1
etc.
2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding › or
buttons, until the Go To (0:00:00) option is selected.
2
Press the OK or Š.
‚
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
42
1
After pressing the SEARCH, press the corresponding
buttons, until the End Search option is selected.
2
Press the OK or Š.
›
or
‚
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 43
VCR
Searching for a Specific Sequence
Intro Scan
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
›
or ‚
GB
2
Press the OK or Š.
3
Press the ¥¥ or ŠŠ buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
5
If you want to watch the tape from a particular Index, simply press
ŠII.
INTRO SCAN:
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2
Press the OK or Š.
3
Press the ¥¥ or ŠŠ buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press ŠŠ) or
backwards: (press ¥¥ ). (¥¥ -20
0
+20 ŠŠ
●
5
●
●
›
INDEX SEARCH :
¥¥ŠŠ
¥¥
- 6
or ‚
●
To cancel an Index search simply press the ŠII or ■ button.
2
2
43
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 44
Using the Tape Counter
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
GB
◆ Allows you to find the beginning of a sequence easily
☛
0:00:00
2
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press INFO. twice to display the counter
◆ Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press ¥¥ or ŠŠ.
➢
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 30).
Press INFO.:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
44
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 45
VCR
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: ◆ You wish to copy a video cassette with the help of a
second VCR.
◆ You wish to play back and/or copy pictures taken
with a camcorder .
☛
GB
DVD
1
◆ Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the DVD-VCR.
DVD
LINE2
VCR
3
➢
4
LINE2
VCR
3
Take care to respect the colour coding of the left and right
channels.
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
45
00169N DVD-V70/XSA-GB2
VCR
11/14/05
10:11 AM
Page 46
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
GB
4
2
1
Insert the cassette to be edited in your DVD-VCR.
2
Press the Šll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the Šll button.
4
Press the F.ADV/STEP (
) button again as often as
necessary to advance frame by frame, until the exact recording
position is located.
5
While the DVD-VCR is in still mode, hold the REC button (●)
down for a while to activate the Assemble Edit function.
6
Select the source from which you wish to record by pressing:
◆ The PROG ( or ) buttons for television channels
◆ The INPUT SEL. button for the LINE input sources
7
Press the Šll button to start recording.
8
When you have finished recording, press ■ .
OK
5
VCR
Recoding from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
EJECT
PROG
STANDBY/ON
DVD
VCR
LINE2
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 14.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input.
5
Start playing back the cassette to be copied.
6
Hold REC (●) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press ■ on both VCR and
DVD-VCR.
2
7
OK
6
46
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
➢
If you wish to view the cassette being copied:
◆ Your DVD-VCR must be connected as usual to the
television (see page 13 for further details)
00169N DVD-V70/XSA-GB2
11/14/05
10:11 AM
Page 47
Using the TV Buttons on the Remote Control ★ (DVD-V80/ DVD-V85 Only)
Your DVD-VCR remote control will work with Samsung televisions
and compatible brands.
STANDBY/ON
OPEN/CLOSE
To determine whether your television is compatible, follow the instructions
below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
Codes
SAMSUNG
AKAI
GRUNDIG
LOEWE
PANASONIC
01 to 06
09, 23
09, 17, 21
02
08, 23 to 27
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
☛
GB
2
Codes
➢
1
2
Brand
Result:
VCR
4
3
4
If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
5
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
5
You can then control the television using the following buttons.
Button
Function
STANDBY/ON ➀
Used to switch the television and DVD-VCR on and off.
TV or VCR ➁
Used to switch between the TV and VCR modes.
INPUT SEL. ➂
Used to select an external source.
6
VOL + or –
➃
Used to adjust the volume of the television.
PROG/TRK
( or )
➄
Used to select the required programme.
TV MUTE
➢
➅
Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
47
00169N DVD-V70/XSA-GB2
DVD
11/14/05
10:11 AM
Page 48
Choosing a Connection
The following show examples of connections commonly used to connect the DVD -VCR player with
a TV and other components. It is only available for DVD. The VCR out can not watch by this
connection.
GB
Connection to an Audio System
Connection to an Television
Television
Dolby Digital Decoder
Digital Audio Input Jack
COAXIAL
OPTICAL
or
DVD-VCR
★ (DVD-V 80/ DVD-V 85)
Digital Audio out
Jack
48
S-Video
Jack
00169N DVD-V70/XSA-GB 3
11/14/05
9:57 AM
Page 49
DVD
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language
in advance, they will come up automatically every time you watch a
movie.
Setup
Setup
Display Setup
Setup :
Using the Disc Menu Language
GB
This function changes the text language only on the disc menu
screens.
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using ›, ‚ buttons, then OK or Š button
3
Select Language Setup using ›, ‚ buttons, then press the
OK or Š button.
4
Select Disc Menu using ›, ‚ buttons, then press the OK or Š
button.
5
Use the ›, ‚ buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
6
Press the OK button.
- English is selected and the screen returns to DVD menu.
Language Setup
Disc Menu
Audio
Subtitle
: English
: English
: Automatic
Disc Menu Language
Disc Menu
49
00169N DVD-V70/XSA-GB 3
DVD
11/14/05
9:57 AM
Page 50
Setting Up the Language Features
Using the Audio Language
Language Setup
GB
Disc Menu
Audio
Subtitle
: English
: English
: Automatic
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using ›, ‚ buttons, then OK or Š button.
3
Select Language Setup using ›, ‚ buttons, then press the OK or
Š button.
4
Select Audio using ›, ‚ buttons, then press the OK or Š button.
5
Press the ›, ‚ buttons to select ‘English’ .
- Select “Original” if you want the default soundtrack language to be
the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
6
Press the OK button.
- English is selected and the screen returns to DVD menu.
Using the Subtitle Language
Setup
Setup
Display Setup
Setup :
Language Setup
Disc Menu
Audio
Subtitle
: English
: English
: Automatic
Subtitle Language
Automatic
Subtitle
50
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using ›, ‚ buttons, then OK or Š button.
3
Select Language Setup using ›, ‚ buttons, then press the OK or
Š button.
4
Select Subtitle using ›, ‚ buttons, then press the OK or Š
button.
5
Use the ›, ‚ buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you
select as your initial language; in that case the disc will use its
original language setting.
6
Press the OK button.
- English is selected and the screen returns to DVD menu.
00169N DVD-V70/XSA-GB 3
11/14/05
9:57 AM
Page 51
DVD
Setting Up the Audio Options
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using ›, ‚ buttons, then OK or Š button.
3
Select Audio Setup using › , ‚ buttons, then press the OK or Š
button.
4
Use the › , ‚ buttons to select the desired item. Then press the
OK or Š button.
GB
Setup
Setup
Display Setup
Setup :
• Dolby Digital Out
1. PCM:
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
➢
•Be sure to select the correct Digital Output or no audio will be
heard.
• MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio.
Dolby Digital Out
MPEG-2 Digital Out
DTS
PCM Down Sampling
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or
7.1CH).Select Bitstream when using the Digital Audio Output.
• DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
• Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
• PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not
96KHz compatible.
In this case, the 96KHz signals will be down converted to
48KHZ.
2. Off : Select this when the amplifier connected to the player is
96KHz compatible.
In this case, all signals will be output without any changes.
➢
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or ¥ button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
51
00169N DVD-V70/XSA-GB 3
DVD
11/14/05
9:57 AM
Page 52
Setting Up the Display Options
1
Setup
Setup
Display Setup
Setup :
GB
Display Setup
TV Aspect
Black Level
NTSC Disc Output
DVD Out
: 4:3 L-Box
: PAL 60 Hz
: Component
With the unit in Stop mode, press the MENU button.
2
Select DVD using ›, ‚ buttons, then OK or Š button.
3
Select Display Setup using ›, ‚ buttons, then press the OK or Š
button.
4
Use the › , ‚ buttons to select the desired item. Then press the
OK or Š button.
• TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and right side of movie picture
will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
• Black Level
Adjusts the brightness of the screen.(On/Off)
• NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave “ PAL 60Hz” as is.
• DVD Output
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Video : Sends COMPOSITE VIDEO signal to the Scart JACK.
52
00169N DVD-V70/XSA-GB 3
11/14/05
9:57 AM
Page 53
DVD
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that
have been assigned a rating - which helps you control the types of
DVDs that your family watches.
There are up to 8 rating levels on a disc.
Setup
Setup
Display Setup
Setup :
GB
.
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using ›, ‚ buttons, then OK or Š button.
3
Select Parental Setup using ›, ‚ buttons, then press the OK or
Š button.
4
Use OK or Š to select Yes if you want to use a password.
The Enter Password screen appears.
5
Enter your password. The Re-Enter Password
screen appears to confirm the password.
Ok your password again. The Parental Control screen appears.
.
Parental Setup
Use Password
No
Yes
: No
• About the Rating Level ;
The Rating Level will work only when Use Password is set to
Yes. To unlock the player, use ›, ‚ to select No. Use Š or OK
to select Rating Level. Press OK.
- Use ›, ‚ to select the level(e.g. Level 6) and press OK. Discs
that contain Level 7 will now not play.
- To cancel the rating level, use Š or OK to select No in Use
Password.
• About the Change Password ;
- Use ›, ‚ to select Change Password.
Press OK. The Change Password screen appears.
- OK your new password. Re-ok the new password again.
➢
~
Yes
• How to make the SETUP menu disappear or return to menu
screen during set up; Press RETURN or ¥ button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
53
00169N DVD-V70/XSA-GB 3
DVD
11/14/05
9:57 AM
Page 54
A/V Receiver Connections
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
GB
Before You Begin...
OR
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
1
Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical ★ (DVD-V80/ DVD-V85)
• Coaxial
• Use whichever connection is available on your A/V Receiver.
54
00169N DVD-V70/XSA-GB 3
11/14/05
9:57 AM
Page 55
DVD
Special Playback Features
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the Šll
(Play/Still) button.
2
GB
1
Still
Press the Šll (Play/Still) button on the remote control during
playback.
1
• The picture will still and the audio will mute.
• To resume playback, press the Šll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
2
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP button on the
remote control to advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press Šll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3
Skip Forward/Back
3
3
OK
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (ŠŠl / l¥¥) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
5
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
(ŠŠ /¥¥) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press Šll (Play/Still) button to resume normal speed.
4
Slow Motion
During playback, press the Šll (Play/Still) button to Still the image.
Then use the Search Forward (ŠŠ ) to play in slow motion at
variable speeds.
• Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
• Audio is muted during slow motion playback.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the Šll
(Play/Still) button.
• Press the ■ (Stop) button twice to completely stop playback.
The next time you press Šll (Play/Still), the disc will start over
from the beginning.
55
00169N DVD-V70/XSA-GB 4
DVD
11/14/05
9:58 AM
Page 56
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
GB
1
Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen setting in the initial DVD menu.
• To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the
initial setup (See page 52).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look
vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
56
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 57
Adjusting the Aspect Ratio (EZ View)
DVD
If you are using a 4:3 TV
GB
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
➢
• This function may behave differently depending on the type of disc.
57
00169N DVD-V70/XSA-GB 4
DVD
11/14/05
9:58 AM
Page 58
Using the Display Function
When Playing a DVD/VCD/CD
1
GB
1
During play, press the INFO. button on the remote.
2
Use the ›, ‚ buttons to select the desired item.
3
Use the ¥, Š buttons to make the desired setup.
• You may use the number buttons of the remote control to directly
access a title, chapter or to start the playback from the desired
time.
4
To make the screen disappear, press the INFO. button again.
OK
➢
• What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar to
tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be considered a
title.
ENG 5.1CH
ENG
TITLE
Off
CHAPTER
TIME
ENG 5.1CH
AUDIO
To access the desired title when there is more than one in the
disc. For example, if there is more than one movie on a DVD,
each movie will be identified.
Most of DVD discs are recorded in chapters so that you can
quickly find a specific passage.
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
Refers to the language of the film soundtrack. In the example,
the soundtrack is played in English 5.1CH. A DVD disc can
have up to eight different soundtracks.
ENG
Off
Refers to the subtitle languages available in the disc.
SUBTITLE You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
A surround sound effect is generated using only two front
3D SOUND speakers.
* When in VCD 2.0 mode (MENU ON mode), this function does not work.
ENG 5.1CH
ENG
Off
~
58
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 59
DVD
Changing the Camera Angle
Using the ANGLE button
OK
When a DVD contains multiple angles of a particular scene, you
can select the Angle function.
GB
2
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper Right hand corner of the
screen.
1
When an ANGLE mark is shown, press the ANGLE button, then an
ANGLE select icon will appear at the upper left hand corner of the
screen.
2
Use the ¥, Š buttons to select the desired screen angle.
3
To turn off the display, press the ANGLE button again.
DVD
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the subtitle
button.
Using the SUBTITLE button
1
1
Press the SUBTITLE button.
2
Use the ¥, Š buttons to select the desired subtitle language.
3
Use the ›, ‚ buttons to determine whether or not the subtitle will
be displayed.
OK
ENG
On
ENG
Off
• Initially, the subtitling will not appear on screen.
• The subtitle languages are represented by abbreviations.
➢
• This function depends on what languages are encoded on
the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
wheneveryou play a DVD; Refer to “Setting Up the
Language Features” on page 50.
59
00169N DVD-V70/XSA-GB 4
DVD
11/14/05
9:58 AM
Page 60
Repeat Play
OK
Repeat the current track, chapter, title, a chosen section (A-B), or all
of the disc.
GB
When playing a DVD
1
1
Press the REPEAT button on the remote.
Repeat screen appears.
2
Select Chapter, Title or A-B using the ¥, Š buttons.
DVD
Off
Of
• Press the REPEAT button. Select A-B on screen with the ¥, Š
buttons.
Chapter Title A - B
• Press OK at the point where you want the repeat play to start
(A). The B is automatically highlighted.
• Press OK at the point where you want the repeat play to stop
(B).
• To terminate the function, press the 'CLEAR' button.
• A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
3
Press OK.
4
To return to normal play, press REPEAT again, then press the ¥, Š
buttons to select Off and press OK.
• It is available to press CLEAR button on the remote controller in
order to stop REPEAT play.
VCD / CD
Off
Of
Track Disc A - B
➢
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
60
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 61
DVD
Selecting the Audio Language
You can select a desired language quickly and easily with the
AUDIO button.
DVD
GB
Using the AUDIO button
1
Press the AUDIO button.
2
Use the ¥, Š buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
3
Use the ¥, Š buttons to select Stereo, ¥ or Š (On VCD/CD)
➢
VCD/ CD
• This function depends on what languages are encoded on the disc
and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play
a DVD ; Refer to “Setting Up the Language Features” on page 50.
61
00169N DVD-V70/XSA-GB 4
DVD
11/14/05
9:58 AM
Page 62
Using the Mark Function
This feature lets you mark sections of a DVD or VCD (MENU OFF
mode) so you can quickly find them at a later time.
OK
GB
Using the Mark Function (DVD/VCD)
1
1
During play, press the MARK button on the remote. The Mark
icons will be displayed.
2
Use the ¥, Š buttons to move to the desired Mark icon.
3
When you reach the scene you want to mark, press the OK
button. The icon will change to a number (1, 2, or 3).
4
Press the MARK button to turn off the display.
Recalling a Marked Scene
CLEAR
1
During play, press the MARK button on the remote.
2
Use the ¥, Š buttons to select a marked scene.
3
Press the PLAY/STILL (Šll ) buttons to skip to the marked scene.
Clearing a Mark
1
During play, press the MARK button on the remote.
2
Use the ¥, Š buttons to select the mark number you want to
delete.
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
➢ • Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
• Depending on the disc, the mark function may not work.
62
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 63
DVD
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first
song file of the first folder plays.
• If more than two file extensions are present, select the media of your
choice.
• To change the currently playing media, press the STOP ( ■ ) button
twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
GB
MP3/WMA Play Function
1
When the first song file is playing, the music folder menu will
appear on the right side of the screen.
Up to 8 music folders can be displayed at a time. If you have more
than 8 folders on a disc, press the ¥, Š buttons to bring them up
on the screen.
2
Use the ›, ‚ buttons to select the desired music folder, then
press OK.
Use the ›, ‚ buttons again to select a song file. Press OK to
begin playback of the song file.
PROGRAM
RANDOM
Program/Random playback
1.
➢
Press the MODE button in STOP mode to switch between the
RANDOM and PROGRAM modes.
• Press the REPEAT button in PLAY mode to hear only music
continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
63
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 64
MP3/WMA Play
CD-R MP3/WMA discs
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
GB
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and
with Apple's Mac. These two formats are the most widely used.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use 8
characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of
the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered
trade mark of The SDMI Foundation). You cannot copy such files.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play
MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
64
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 65
Program Play & Random Play
Program Play (CD/MP3/WMA)
PROGRAM
1.
Press the MODE button.
2.
Use the ¥, Š buttons to select PROGRAM. Press the OK button.
3.
Use the ›, ‚/ ¥, Š buttons to select the first track to add to the
program.
Press the OK button. The selection numbers appear in the
Program Order box.
4.
Press the PLAY/STILL ( ŠII ) button.
The disc will be played in programmed order.
RANDOM
GB
PROGRAM 01
Program order
Track
01
05
09
13
02
06
10
14
03
07
11
15
04
08
12
16
Random Play (CD/MP3/WMA)
------
------
------
------
CLEAR
1.
Press the MODE button.
2.
Use the ¥, Š buttons to select RANDOM. Press the OK button.
The disc will be played in random order.
➢
• Depending on the disc, the Program and Random Play
functions may not work.
PROGRAM
RANDOM
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
65
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 66
Picture CD Playback
• Select JPEG in the menu to view a Photo CD.
• To change the currently playing media, press the STOP ( ■ ) button
twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
GB
Album
Photo : 1 /215
1.
Open the disc tray.
2.
Load the disc on the tray.
Load the disc with the labeled side up.
3.
Close the tray.
- The tray closes and you should get a screen that looks like the
one below.
• Use the ›, ‚ or ¥, Š buttons on the remote controller to select the
picture you want to view and then press the OK button. (Press the
PLAY/STILL (ŠII) button if you want to play it in the Slide Show mode.)
• To see the next 6 pictures, press the ŠŠl button.
• To see the previous 6 pictures, press the l¥¥ button.
•
: Return to the Album Screen.
•
: Each time the OK button is pressed, the picture rotates 90
degrees clockwise.
•
: Each time the OK button is pressed, the picture is enlarged up to
2X. (Normal ➝ 2X ➝ Normal)
•
: The unit enters slide show mode.
Photo : 1 /215
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
Timer :
•
: When this icon is selected and OK is pressed, the pictures
change automatically with about an 6 second interval.
•
: The pictures change automatically with about an 12 second
interval.
•
: The pictures change automatically with about an 18 second
interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
➢
• When the banner is being appeared, press the RETURN button to return to the album screen.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the ›, ‚ or ¥ , Š buttons on the remote controller to display the menu again.
66
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 67
Picture CD Playback
DVD
CD-R JPEG Discs
GB
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special
characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
67
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 68
Technical Specifications
GB
General
Rated voltage
220 - 240V~, 50Hz
Power consumption
23 Watts
Weight
4.5 Kg
Size
430mm X 265mm X 94mm
Operating ambient temperature
+5°C ~ +35°C
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
Input
Video input (Rear)
RCA jack : 1.0Vp-p (unbalanced) 75Ω
Audio input (Rear)
RCA jack : -8dBm, 47Kohm unbalanced
RF out
UHF 21-69 (Initial CH36) : Newzealand model
UHF 28-69 (Initial CH38) : Australia model
Output
Audio (DVD, VCR)
RCA jack
Audio (DVD only)
Digital audio out (OPTICAL, COAXIAL)
Video (DVD, VCR)
RCA jack
Video (DVD only)
S-Video out
COMPONENT out : RCA jack
Tape format
VHS type video tape,
S-VHS type video tape (Playback only)
VCR
DVD
68
Color system
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
Tuning system
B/G, D/K : Newzealand model
B/B : Australia model
Video S/N
Above 43dB (standard recording)
Resolution
Above 240 lines (standard recording)
Audio S/N
Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics
20Hz - 20KHz (Hi-Fi)
Disc
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
Audio S/N
95dB
Audio dynamic range
105dB
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 69
Problems and Solutions (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
Problem
Explanation/Solution
No power
◆
◆
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded
◆
◆
◆
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆
◆
◆
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
No playback picture or the picture
is distorted
◆
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
◆
◆
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
◆
Press the TRK (
◆
A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK ( or ) buttons
during SLOW motion to minimize this effect.
Video Head Cleaning
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the DVD-VCR
TV does not find the Screen
or the pattern when found suffers
from interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVDVCR” (see page 16).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 25), move the channel number
several channels down from the original setting.
(example: from 36 to 39).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 16).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
Noise bars or streaks on playback
When the ŠII button is pressed
during playback, the still picture
has severe “noise bars” streaks
or
GB
) buttons to minimize this effect.
If you are unable to solve the problem after reading the above instructions, note:
◆ The model and serial number on the rear of your DVD-VCR
◆ The warranty information
◆ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
69
00169N DVD-V70/XSA-GB 4
11/14/05
10:57 AM
Page 70
Troubleshooting Guide (DVD)
Before requesting service (troubleshooting)
GB
Problem
Disc does not play.
5.1 channel sound is not
being reproduced.
Action
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
VIDEO-CD or a CD.
P6
◆
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
Check if your audio system is connected and working properly.
◆
◆
◆
The
icon appears on
screen.
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Playback mode differs from
the Setup Menu selection.
◆
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
◆
The Screen Ratio is fixed on your DVDs.
No audio.
◆
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
◆
Press power on from a cold start with no disc in the unit. Press the
ŠŠ and ¥¥ buttons simultaneously on the front panel for five
seconds. Press the MENU button on the remote control to select the
Parental Mode. The Parental Mode is now unlocked as indicated on
the display. Press the DOWN button to select Parental. Press OK
and the Create Password display will appear. You can now set your
rating level and change your password to a new number.
◆
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
Forgot password
If you experience other
problems.
70
◆
P51
P55-67
P49-53
P52
P51
00169N DVD-V70/XSA-GB 4
11/14/05
9:58 AM
Page 71
THIS APPLIANCE IS DISTRIBUTED BY
ELECTRONICS
www.samsung.com.au
AK68-00169N