Audiovox SRXM-001 Specifications

Integrated High Definition
LCD Television
HIGH-DEFINITION TELEVISION
26HL67
32HL67
32HL67U
37HL67
42HL67
For an overview of steps for setting up your new TV, see page 9.
Note: To display a High Definition picture, the TV must be receiving a
High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High Definition
digital satellite program). For details, please contact your TV antenna
installer, cable provider, or satellite provider.
© 2007 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
YC/M1 VX1A000401A0
Dear Customer,
Thank you for purchasing this Toshiba LCD TV. This manual
will help you use the many exciting features of your new LCD
TV. Before operating your LCD TV, please read this manual
completely, and keep it nearby for future reference.
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
Child Safety
It Makes A Difference
Where Your TV Stands
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
The Issue
a If you are like most consumers, you have a TV in your
home. Many homes, in fact, have more than one TV.
a The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however,
they are not always supported on the proper TV stands.
a Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
Toshiba Cares!
a The consumer electronics
industry is committed to
making home entertainment
enjoyable and safe.
a The Consumer Electronics
Association formed the
Home Entertainment
Support Safety Committee,
comprised of TV and
consumer electronics
furniture manufacturers, to
advocate children’s safety and
educate consumers and their
families about television safety.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions.
See item 20 on page 3.
WARNING: If you decide to wall mount this television,
always use a UL Listed wall bracket appropriate for the size
and weight of this television. The use of any wall bracket
other than a UL Listed wall bracket appropriate for the size
and weight of this television for wall mounting this television
could result in serious bodily injury and/or property damage.
See “Removing the Pedestal Stand” (- page 5).
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s attention
to Article 820-40 of the U.S. NEC, which provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical. For
additional antenna grounding information, see items 27 and 28
on page 4.
Tune Into Safety
a
a
a
a
a
a
a One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your TV
(and other electronic components).
Use appropriate angle braces, straps, and anchors to
secure your furniture to the wall (but never screw
anything directly into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with furniture
and TVs.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of
the home with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES ®
2
Important Safety Instructions
15) CAUTION:
• To reduce the risk of electric shock, do not use the
polarized plug with an extension cord, receptacle, or
other outlet unless the blades can be inserted
completely to prevent blade exposure.
• To prevent electric shock, match wide blade of plug to
wide slot; fully insert.
1)
Read these instructions.
2)
3)
4)
Keep these instructions.
Heed all warnings.
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8)
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Installation, Care, and Service
9)
Do not defeat the safety purpose of Wide blade
the polarized or grounding type
plug. A polarized plug has two blades
with one wider than the other.
A grounding type plug has two blades
and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Follow these recommendations and precautions and heed all
warnings when installing your TV:
10) Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
Additional Safety Precautions
14a) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV does not
operate normally, take the following precautions:
• ALWAYS turn off the TV and unplug the power cord to
avoid possible electric shock or fire.
• NEVER allow your body to come in contact with any
broken glass or liquid from the damaged television. The
LCD panel inside the TV contains glass and a toxic
liquid. If the liquid comes in contact with your mouth or
eyes, or your skin is cut by broken glass, rinse the
affected area thoroughly with water and consult your
doctor.
• ALWAYS contact a service technician to inspect the TV
any time it has been damaged or dropped.
16) WARNING:
To prevent the spread of fire, keep candles or other open
flames away from this product at all times.
Installation
17) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
18)
DANGER: RISK OF
SERIOUS PERSONAL
INJURY, DEATH, OR
EQUIPMENT DAMAGE!
Never place the TV on an unstable cart,
stand, or table. The TV may fall, causing
serious personal injury, death, or serious
damage to the TV.
19) To avoid damage to this product, never place or store the
TV in direct sunlight; hot, humid areas; or areas subject to
excessive dust or vibration.
20) Always place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit. To secure
the TV, use a sturdy tie from the hooks on the rear of the
TV pedestal to a wall, pillar, or other immovable structure.
Make sure the tie is tight, secure, and parallel to the floor.
4"
min.
Clip
TV side
Sturdy tie (as short as possible)
Hooks
Clip
TV top
21) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
22) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains, or
walls; or
• in a confined space such as a
bookcase, built-in cabinet, or
any other place with poor
ventilation.
The slots and openings are provided to protect the TV from
overheating and to help maintain reliable operation of the
TV. Leave a space of at least 4 (four) inches around the TV.
(continued)
3
23) Always place the back of the television at least four (4)
inches away from any vertical surface (such as a wall) to
allow proper ventilation.
24) Never allow anything to rest on or roll over the power cord,
and never place the TV where the power cord is subject to
wear or abuse.
25) Never overload wall outlets and extension cords.
26) Always operate this equipment from a 120 VAC, 60 Hz
power source only.
27) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
Antenna lead-in wire
Ground clamp
Electric service equipment
Ground clamps
28)
Antenna discharge unit
(NEC Section 810-20)
Power service grounding
electrode system (NEC Art 250 Part-H)
• Use extreme care to make sure you are never in a
position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity: a) an antenna system; or b) cables,
wires, or any home theater component connected to an
antenna or phone system.
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
29) If you use the TV in a room whose temperature is 32 ºF
(0 ºC) or below, the picture brightness may vary until the
LCD warms up. This is not a sign of malfunction.
30) Always unplug the TV before
cleaning. Gently wipe the
display panel surface (the TV
screen) using a dry, soft cloth
only (cotton, flannel, etc.). A
hard cloth may damage the
surface of the panel. Avoid
contact with alcohol, thinner, benzene, acidic or alkaline
solvent cleaners, abrasive cleaners, or chemical cloths,
which may damage the surface. Never spray volatile
compounds such as insecticide on the cabinet. Such
products may damage or discolor the cabinet.
WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the TV
cabinet slots.
32) While it is thundering, do not touch the connecting cables
or apparatus.
33) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
34) During normal use, the TV may make occasional snapping
or popping sounds. This is normal, especially when the
unit is being turned on or off. If these sounds become
frequent or continuous, unplug the power cord and contact
a Toshiba Authorized Service Center.
35)
Grounding conductors
(NEC Section 810-21)
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
4
31)
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE!
Never strike the screen with a sharp
or heavy object.
36) • The LCD screen of this product can be damaged by
ultraviolet radiation from the sun. When selecting a
location for the television, avoid locations where the
screen may be exposed to direct sunlight, such as in
front of a window.
• Never touch, press, or place anything on the LCD
screen. These actions will damage the LCD screen. If
you need to clean the LCD screen, follow the
instructions in item 30 on this page.
Service
37)
WARNING:
RISK OF ELECTRIC SHOCK!
Never attempt to service the TV yourself. Opening and
removing the covers may expose you to dangerous
voltage or other hazards. Failure to follow this WARNING
may result in death or serious injury. Refer all servicing not
specified in this manual to a Toshiba Authorized Service
Center.
38) If you have the TV serviced:
• Ask the service technician to use only replacement
parts specified by the manufacturer.
• Upon completion of service, ask the service technician
to perform routine safety checks to determine that the
TV is in safe operating condition.
39) The cold cathode fluorescent lamp in the LCD panel
contains a small amount of mercury.
When the TV reaches the end of its useful life, dispose of
the used TV by the approved method for your area, or ask
a qualified service technician to properly dispose of the
TV.
Note: The lamp(s) inside this product contain
mercury. Disposal may be regulated due to
environmental considerations. For disposal or
recycling information, contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).
Choosing a location for your LCD TV
To Display your LCD TV on the included Pedestal
Stand:
Observe the following safety precautions:
1) Read and Follow the pedestal assembly instructions included
with the pedestal.
CAUTION: Before beginning pedestal assembly, carefully lay
the front of the LCD Panel face down on a flat, cushioned
surface such as a quilt or blanket. Leave the bottom of the unit
protruding over the edge of the surface and assemble the
pedestal as indicated below.
Note: Extreme care should always be used when attaching
the pedestal stand to avoid damage to the LCD panel.
2) Place the TV on a sturdy, level surface that can support the
weight of the TV.
3) Be sure to secure the TV to a wall, pillar, surface, or other
immovable structure. To secure the TV in this manner, use the
included strap located at the rear of pedestal stand. (- item 20,
page 3).
To Display your LCD TV using a Wall Bracket:
If you decide to wall mount your LCD TV, always use a ULlisted wall bracket appropriate for the size and weight of the
LCD TV (- page 2) :
1) CAUTION: Two people are required for installation.
2) Unplug and remove any cables and/or other component
connectors from the rear of the TV.
3) Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s) are
attached to the wall and the back of the TV as described in the
instructions provided with the wall bracket.
4) After attaching the appropriate bracket(s) to the wall and the
back of the TV, remove the pedestal stand from the TV as
described below.
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.
Note: Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel.
2) Remove the jack pack cover on the back of the TV to expose
the pedestal stand screws. The jack pack cover can be removed
without tools.
3) Remove the five screws shown in the diagram below. This will
allow removal of the pedestal stand.
4) Once you have removed all five screws holding the pedestal
stand in place, remove the pedestal stand from the TV by
sliding the pedestal stand away from the TV.
Five screws
5
FCC Declaration of Conformity
Compliance Statement
(Part 15):
The Toshiba 26HL67, 32HL67, 37HL67, 42HL67, and
32HL67U Televisions comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
removing and applying power to the equipment, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution: Changes or modifications to this equipment not
expressly approved by Toshiba could void the user’s authority
to operate this equipment.
6
Important notes about your LCD
TV
The following symptoms are technical limitations of LCD
Display technology and are not an indication of malfunction;
therefore, Toshiba is not responsible for perceived issues
resulting from these symptoms.
1) An afterimage (ghost) may appear on the screen if a fixed, nonmoving image is displayed for a long period of time. The
afterimage is not permanent and will disappear in a short period
of time.
2) The LCD panel contained in this TV is manufactured using an
extremely high level of precision technology; however, there
may be an occasional pixel (dot of light) that does not operate
properly (does not light, remains constantly lit, etc.). This is a
structural property of LCD technology, is not a sign of
malfunction, and is not covered under your warranty. Such
pixels are not visible when the picture is viewed from a normal
viewing distance.
Note: Interactive video games that involve shooting a “gun”
type of joystick at an on-screen target may not work with this
TV.
Trademark Information
• WOW, SRS and l symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Contents
Important Safety Instructions .......................................... 3
Installation, Care, and Service ........................................ 3
Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Welcome to Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Features of your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Overview of steps for installing, setting up, and using
your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TV front and side panel controls and connections . . . . . . . . 10
TV back panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 2: Connecting your TV . . . . . . . . . . . . . . . . . . . . . . .12
Overview of cable types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About the connection illustrations . . . . . . . . . . . . . . . . . . . . 12
Connecting a VCR and antenna or Cable TV
(no Cable box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a VCR with S-video and a cable box . . . . . . . . 14
Connecting a DVD player with ColorStream®
(component video), a VCR, and a satellite receiver. . . . 15
Connecting a camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting an HDMI™ or DVI device to the HDMI
input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting a digital audio system . . . . . . . . . . . . . . . . . . . . 18
Connecting an audio system . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting a personal computer (PC) . . . . . . . . . . . . . . . . . 19
Chapter 3: Using the remote control . . . . . . . . . . . . . . . . . . .20
Preparing the remote control for use. . . . . . . . . . . . . . . . . . . 20
Installing the remote control batteries . . . . . . . . . . . . . . . . . 20
Remote control effective range. . . . . . . . . . . . . . . . . . . . . . . 20
Learning about the remote control . . . . . . . . . . . . . . . . . . . . 21
Using the remote control to control your other devices . . . . 22
Remote Control functional key chart . . . . . . . . . . . . . . . . . . 23
Programming the remote control to control your other
devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 4: Menu layout and navigation . . . . . . . . . . . . . . . . .27
Main menu layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setup/Installation menu layout . . . . . . . . . . . . . . . . . . . . . . . 28
Navigating the menu system. . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 5: Setting up your TV. . . . . . . . . . . . . . . . . . . . . . . .29
Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . 29
Configuring the antenna input source for the ANT
terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Programming channels into the TV’s channel memory . . . . 30
Programming channels automatically . . . . . . . . . . . . . . 30
Manually adding and deleting channels in the channel
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Labeling channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the HDMI™ audio mode . . . . . . . . . . . . . . . . . . . . . . 32
Viewing the digital signal meter . . . . . . . . . . . . . . . . . . . . . . 33
Viewing the system status. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Selecting the Power-On Mode . . . . . . . . . . . . . . . . . . . . . . . 34
Chapter 6: Using the TV’s features . . . . . . . . . . . . . . . . . . . .35
Selecting the video input source to view . . . . . . . . . . . . . . . 35
Labeling the video input sources . . . . . . . . . . . . . . . . . . . . . 35
Tuning channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Tuning channels using the Channel Browser™ . . . . . . . 36
Tuning to the next programmed channel . . . . . . . . . . . . 38
Tuning to a specific channel (programmed or
unprogrammed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Switching between two channels using Channel
Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Switching between two channels using SurfLock™ . . . . 38
Selecting the picture size . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only) . . . . . . . . . . . . . . . . . . . . . . 40
Using the auto aspect ratio feature . . . . . . . . . . . . . . . . . . . . 41
Selecting the cinema mode (480i and 1080i signals) . . . . . . 41
Adjusting the picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Selecting the picture mode . . . . . . . . . . . . . . . . . . . . . . . 42
Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . . 42
Using the closed caption mode . . . . . . . . . . . . . . . . . . . . . . . 43
Base closed captions . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Digital CC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CC Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Adjusting the audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Muting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Using the digital audio selector . . . . . . . . . . . . . . . . . . . 44
Selecting stereo/SAP broadcasts . . . . . . . . . . . . . . . . . . 45
Adjusting the audio quality . . . . . . . . . . . . . . . . . . . . . . 45
Using the StableSound® feature. . . . . . . . . . . . . . . . . . . 46
Selecting the optical audio output format . . . . . . . . . . . 46
Using the Dolby® Digital Dynamic Range
Control feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using the Locks menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Entering the PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . 47
If you cannot remember your PIN code . . . . . . . . . . . . . 47
Changing your PIN code . . . . . . . . . . . . . . . . . . . . . . . . 47
Blocking TV programs and movies by rating
(V-Chip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Downloading an additional rating system for blocking
TV programs and movies . . . . . . . . . . . . . . . . . . . . 48
Blocking channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Unlocking programs temporarily . . . . . . . . . . . . . . . . . . 50
Using the input lock feature . . . . . . . . . . . . . . . . . . . . . . 50
Using the control panel lock feature . . . . . . . . . . . . . . . 51
Using the PC settings feature . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting the PC Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting the sleep timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Displaying TV status information. . . . . . . . . . . . . . . . . . . . . 53
Understanding the auto power off feature . . . . . . . . . . . . . . 53
Understanding the last mode memory feature . . . . . . . . . . . 53
Chapter 7: Using the TV’s advanced features . . . . . . . . . . . . . 54
Using the advanced picture settings features . . . . . . . . . . . . 54
Using dynamic contrast . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using the static gamma feature . . . . . . . . . . . . . . . . . . . 54
Selecting the color temperature . . . . . . . . . . . . . . . . . . . 55
Using CableClear® digital noise reduction . . . . . . . . . . 55
Using MPEG noise reduction. . . . . . . . . . . . . . . . . . . . . 56
Using the Game Mode feature . . . . . . . . . . . . . . . . . . . . 56
Using the advanced audio settings features . . . . . . . . . . . . . 57
Using the SRS WOW™ surround sound feature . . . . . . 57
Chapter 8: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 58
General troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
LED indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Chapter 9: Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Limited United States Warranty
for LCD Televisions 26” and Larger . . . . . . . . . . . . . . . 62
Limited Canada Warranty
for LCD Televisions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
7
Chapter 1: Introduction
Welcome to Toshiba
Features of your new TV
Thank you for purchasing this Toshiba LCD TV, one of the
most innovative LCD TVs on the market. This digital
television is capable of receiving analog basic, digital basic
and digital premium cable television programming by direct
connection to a cable system providing such programming. A
security card provided by your cable operator is required to
view encrypted digital programming. Certain advanced and
interactive digital cable services such as video-on-demand, a
cable operator's enhanced program guide and data-enhanced
television services may require the use of a set-top box. For
more information call your local cable operator.
The following are just a few of the many exciting features of
your new Toshiba widescreen, integrated HD, LCD TV:
• Integrated digital tuning (8VSB ATSC and QAM)
eliminates the need for a separate digital converter set-top
box (in most cases).
• Three HDMI™ digital, high-definition multimedia
interfaces 1080p input support (- page 17).
• Two sets of ColorStream® HD high-resolution component
video inputs (- page 15).
• SRS WOW™ audio technologies (- page 57).
• Digital Audio Out optical audio connection with Dolby®
Digital optical output format (- page 46).
• CableClear® digital picture noise reduction
(- page 55).
• PC IN (Analog RGB) computer terminal (- page 19).
• Channel Labeling allows you to put the Call Letters (e.g.
ABC, HBO, etc.) on the screen along with the station
numbers, so you always know what you’re watching
(- page 31).
8
Chapter 1: Introduction
Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using its many
exciting features.
1
Carefully read the important safety, installation, care, and
service information. Keep this manual for future
reference.
2
Observe the following when choosing a location for the
TV:
• Read “Important notes about your LCD TV”
(- page 6).
• Place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit. Secure
the TV to a wall, pillar, or other immovable structure
(- page 3).
• Place the TV in a location where light does not reflect
on the screen.
• Place the TV far enough from walls and other objects to
allow proper ventilation. Inadequate ventilation may
cause overheating, which will damage the TV. THIS
TYPE OF DAMAGE IS NOT COVERED UNDER
THE TOSHIBA WARRANTY.
3
Do not plug in any power cords until AFTER you have
connected all cables and devices to your TV.
4
BEFORE connecting cables or devices to the TV, learn
the functions of the TV’s connections and controls
(- pages 10–11).
5
Connect your other electronic device(s) to the TV
(- pages 12–19).
6
7
Install the batteries in the remote control (- page 20).
8
Program the remote control to operate your other
device(s) (- pages 22–26).
9
AFTER connecting all cables and devices, plug in the
power cords for your TV and other devices. The yellow
LED will blink until the TV goes into standby mode.
When the TV is in standby mode, press POWER on the
TV control panel or remote control to turn on the TV.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn the TV
off or on, press and hold the POWER button for 5
seconds to reset the TV.
10 See “Menu layout and navigation” for a quick overview of
navigating the TV’s menu system (- page 27).
11 Program channels into the TV’s channel memory
(- page 30).
12 For details on using the TV’s features, see Chapters 6
and 7.
13 For help, refer to the Troubleshooting Guide, Chapter 8.
14 For technical specifications and warranty information, see
Chapter 9.
15 Enjoy your new TV!
See “Learning about the remote control” (- page 21) for
an overview of the buttons on the remote control.
9
Chapter 1: Introduction
TV front and side panel controls and connections
Model 42HL67 is used in this manual for illustration purposes.
TV top
Right side panel
TV front
4
8
5
9
6
10
7
Control panel
3
POWER
1
1
Green and Yellow LEDs
Green = Power indicator
Yellow = Power-On Mode indicator (- “Selecting the
Power-On Mode” on page 34)
See “LED indications” on page 60 for additional
information.
2
Remote sensor — Point the remote control toward this
remote sensor (- “Remote control effective range” on
page 20).
3
VIDEO-2 IN — The side panel A/V connections are
referred to as “VIDEO 2” and include standard A/V
connections.
4
POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
5
ARROWS BbC c — When a menu is on-screen, these
buttons function as up/down/left/right menu navigation
buttons.
6
MENU (ENTER) — Press to access the menu system
(- pages 27–28). When a menu is on-screen, the MENU
button on the TV’s control panel functions as the ENTER
button.
7
EXIT — Press to instantly close an on-screen menu.
10
2
8
CHANNEL Bb — When no menu is on-screen, these
buttons change the channel (programmed channels only;
- page 30).
9
VOLUME C c — These buttons adjust the volume level.
10 INPUT — Repeatedly press to change the source you are
viewing (ANT, VIDEO 1, VIDEO 2, ColorStream
HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3,
PC).
Chapter 1: Introduction
TV back panel connections
For an explanation of cable types and connections, see pages 12–19.
1
2
TV back
Power cord
Cable Clamper
3
4
5
1
2
6 7
8
9
ColorStream® HD-1 and ColorStream® HD-2 —
Two sets of ColorStream® high-definition component
video inputs (with standard stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream®.
7
Digital Audio OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
8
HDMI™ IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital
video from an HDMI device or uncompressed digital
video from a DVI device. Also see item 4. HDMI
connection is necessary to receive 1080p signals.
9
Service port — For service use only. Used for updating
the television’s firmware.
VIDEO-1 IN — Standard (composite) video and standard
audio inputs plus optional S-video inputs for connecting
devices with composite video or S-video output.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.
3
Fixed Audio OUT — Analog audio outputs for
connecting an audio amplifier.
4
PC/HDMI-1 (AUDIO) IN — PC audio input terminals
are shared with HDMI-1 analog audio input terminals, and
their use can be configured in the Audio Setup menu
(- page 52).
5
PC IN — For use when connecting a personal computer.
6
ANT — Antenna input that supports analog (NTSC) and
digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
11
Chapter 2: Connecting your TV
Overview of cable types
Cables can be purchased from most stores that sell audio/video
devices. Before purchasing any cables, be sure of connector
types required by your devices and the length of each cable.
Coaxial (F-type) cable
Coaxial (F-type) cable is used for connecting your antenna,
cable TV service, and/or cable converter box to the ANT input
on your TV.
HDMI™ cable (with HDMI Logo “
”)
HDMI (High-Definition Multimedia Interface) cable is for use
with devices with an HDMI output. An HDMI cable delivers
digital audio and video in its native format. This cable carries
both video and audio information; therefore, separate audio
cables are not required for a complete HDMI device
connection (- page 17 and page 19).
Note: HDMI cable provides better picture performance than a
standard (composite) video or S-video cable.
Optical audio cable
Standard A/V cables (red/white/yellow)
Optical audio cable is for connecting receivers with Dolby
Digital or PCM (pulse-code modulation) optical audio input to
the TV’s DIGITAL AUDIO OUT terminal (- page 18).
Standard A/V cables (composite video) usually come in sets of
three, and are for use with video devices with analog audio and
composite video output. These cables (and the related inputs
on your TV) are typically color-coded according to use: yellow
for video, red for stereo right audio, and white for stereo left
(or mono) audio.
Analog RGB (15-pin) computer cable
S-video cable
Analog RGB (15-pin) computer cable is for connecting a PC to
the TV’s PC IN terminal (- page 19).
S-video cable is for use with video devices with S-video
output. Separate audio cables are required for a complete
connection.
Note: An S-video cable provides better picture performance
than a composite video cable. If you connect an S-video cable,
be sure to disconnect the standard (composite) video cable or
the picture performance will be unacceptable.
Component video cables (red/green/blue)
Component video cables come in sets of three and are for use
with video devices with component video output.
(ColorStream® is Toshiba’s brand of component video.) These
cables are typically color-coded red, green, and blue. Separate
audio cables are required for a complete connection.
Note: Component video cables provide better picture
performance than a standard (composite) video or S-video
cable.
12
About the connection illustrations
You can connect different types and brands of devices to your
TV in several different configurations. The connection
illustrations in this manual are representative of typical device
connections only. The input/output terminals on your devices
may differ from those illustrated herein. For details on
connecting and using your specific devices, refer to each
device’s owner’s manual.
Chapter 2: Connecting your TV
Connecting a VCR and antenna or Cable TV (no Cable box)
TV upper back panel
From Cable TV or antenna
Stereo VCR
VIDEO
L
AUDIO
R
IN
CH 3
CH 4
OUT
L
IN from ANT
OUT to TV
R
TV lower back panel
You will need:
To view the antenna or Cable signal:
• coaxial cables
• standard A/V cables
– For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the TV to
your VCR’s audio out terminal using the white audio cable
only.
Select the ANT video input source on the TV.*
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- page 21). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
13
Chapter 2: Connecting your TV
Connecting a VCR with S-video and a cable box
An S-video connection will provide better picture performance than a standard (composite) video cable.
TV upper back panel
From Cable TV
Cable box
IN CH 3
CH 4
OUT
stereo VCR
VIDEO
L
AUDIO
R
IN
CH 3
CH 4
OUT
L
IN from ANT
OUT to TV
R
TV lower back panel
You will need:
To view basic and premium Cable channels:
• coaxial cables
• S-video cable
– Do not connect both types of video cable to VIDEO 1 at
the same time or the picture performance will be
unacceptable.
Turn OFF the VCR. Select the ANT video input source on the
TV.* Tune the TV to channel 3 or 4 (whichever channel the
Cable box output is set to). Use the Cable box controls to
change channels.
• standard audio cables
– If you have a mono VCR, connect L/MONO on the TV to
your VCR’s audio out terminal using the white audio cable
only.
Note: When you use a Cable box, you may not be able to use
the remote control to program or access certain features on the
TV.
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- page 21). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
14
Chapter 2: Connecting your TV
Connecting a DVD player with ColorStream® (component video), a VCR,
and a satellite receiver
Your TV has two sets of ColorStream® (component video) inputs.
TV upper back panel
From antenna
Stereo VCR
AUDIO
OUT
Y
PB
L
PR
COMPONENT VIDEO S-VIDEO VIDEO
OUT
OUT
VIDEO
L
AUDIO
R
IN
R
CH 3
CH 4
OUT
DVD player with component video
L
IN from ANT
OUT to TV
R
From satellite dish
AUDIO
OUT
Y
Satellite
IN
PB
PR
COMPONENT VIDEO S-VIDEO VIDEO
OUT
OUT
L
R
Satellite receiver with component video
TV lower back panel
You will need:
• coaxial cables
• standard A/V cables
– For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the TV to
your VCR’s audio out terminal using the white audio cable
only.
• standard audio cables
• component video cables
– You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to either
set of ColorStream terminals on the TV (HD-1 or HD-2).
The ColorStream HD-1 and HD-2 terminals can be used
with Progressive (480p, 720p) and Interlaced (480i, 1080i)
scan systems. A 1080i signal will provide the best picture
performance (1080p is not supported).
– If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel. If your DVD player has HDMI
video, see page 17.
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the ColorStream HD-2
video input source on the TV.*
To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO 1 video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record.
Select the ColorStream HD-1 video input source on the TV*
to view the DVD.
* To select the video input source, press INPUT on the remote control
(- page 21). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
To view antenna or Cable channels:
Select the ANT video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream HD-1
video input source on the TV.*
15
Chapter 2: Connecting your TV
Connecting a camcorder
You will need:
• standard A/V cables
– For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to VIDEO 1 on the TV back instead of the VIDEO 2 on the
TV right side panel.
Camcorder
VIDEO
AUDIO
OUT
L
R
VIDEO 2 inputs on TV right side panel
To view the camcorder video:
Select the VIDEO 2 video input source on the TV.*
* To select the video input source, press INPUT on the remote control
(- page 21). To program the TV remote control to operate other
devices, see Chapter 3.
16
Chapter 2: Connecting your TV
Connecting an HDMI™ or DVI device
to the HDMI input
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source device, or
uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form
from EIA/CEA-861-D–compliant[1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
The HDMI input can accept and display VGA, 480i (60Hz),
480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/
60Hz) signal formats. For detailed signal specifications, see
page 61.
Supported Audio format: Linear PCM, sampling rate 32/44.1/
48 kHz
To connect a DVI device, you will need:
• one HDMI-to-DVI adapter cable (HDMI type A connector)
per DVI device
– For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
• one pair of standard analog audio cables per DVI device
– An HDMI-to-DVI adapter cable transfers video only.
Separate analog audio cables are required (see
illustration).
– See “Setting the HDMI™ audio mode” (- page 32).
TV upper back panel
TV lower back panel
Note: To connect a PC to the HDMI input, see page 19.
To connect an HDMI device, you will need:
• one HDMI cable (type A connector) per HDMI device
– For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (
).
– To display an 1080p/60Hz signal format, you will need a
Category 2 cable. Conventional HDMI/DVI cable may not
work properly.
– HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration).
– See “Setting the HDMI™ audio mode” (- page 32).
TV lower back panel
HDMI device
VIDEO
L
AUDIO
R
HDMI OUT
IN IN
DVI device
VIDEO
L
DVI/HDCP
OUT
AUDIO
R
IN IN
OUT
L
R
Note: To ensure that the HDMI or DVI device is reset properly,
it is recommended that you follow these procedures:
• When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital content
protection, which is being standardized for reception of highdefinition video signals. Because this is an evolving technology, it
is possible that some devices may not operate properly with the TV.
OUT
L
R
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
To view the HDMI device video:
Select the HDMI 1, HDMI 2, or HDMI 3 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- page 21). To program the TV remote control to operate other
devices, see Chapter 3.
17
Chapter 2: Connecting your TV
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®*
Digital g or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby® Digital
decoder or other external audio system with optical audio
input.
You will need:
• optical audio cable (Use an optical audio cable that has the
larger “TosLink” connector and not the smaller “minioptical” connector.)
Dolby Digital decoder or
other digital audio system
* Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are registered trademarks of Dolby
Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
Optical
Audio IN
LINE IN
L
R
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
You will need:
TV lower back panel
• standard audio cables
Analog audio amplifier
LINE IN
L
R
To control the audio:
1
2
3
Turn on the TV and the digital audio device.
TV upper back panel
Press Y on the TV’s remote control and open the Audio
menu.
Highlight Audio Setup and press T.
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
4
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
(- “Selecting the optical audio output format” on
page 46).
Audio Setup
PC Audio
No
HDMI 1 Audio
Auto
MTS
Stereo
Language
English
Optical Output Format
Dolby Digital
Dolby Digital
Dynamic Range Control
Compressed
Reset
18
Done
To control the audio:
1
2
Turn on the TV and the stereo amplifier.
Minimize the sound volume from the TV’s built-in
speakers and control the volume level using the
amplifier’s remote control.
Chapter 2: Connecting your TV
Connecting a personal computer
(PC)
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• Signal names for mini D-sub 15-pin connector
With either the PC IN or HDMI connection, you can watch
your computer’s display on the TV and hear the sound from the
TV’s speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV, use an
analog RGB (15-pin) computer cable and a PC audio cable.
TV upper back panel
TV lower back panel
Pin No.
1
2
3
4
5
Signal
name
R
G
B
NC *
NC
Pin No.
6
7
8
9
10
Signal
name
Ground
Ground
Ground
NC
Ground
Pin No.
11
12
13
14
15
Signal
name
NC
NC
H-sync
V-sync
NC
*NC=Not connected
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the TV, use
an HDMI-to DVI adapter cable and analog audio cables.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). Separate analog cables are not necessary
(- page 17).
TV upper back panel
TV lower back panel
PC audio
cable
Computer
PC audio
output
PC audio
cable
Conversion adapter
(if necessary)
Computer
• To use a PC, set the monitor output resolution on the PC
before connecting it to the TV. The following signals can be
displayed:
Format
Resolution
V. Frequency
VGA
640 × 480
60Hz
SVGA
800 × 600
60Hz
XGA
1024 × 768
60Hz
Other formats or non-standard signals will not be displayed
correctly.
• To display the optimum picture, use the PC setting feature
(- “Using the PC settings feature” on page 51).
Note:
• The PC audio input terminals on the TV are shared with the
HDMI-1 analog audio input terminals (- page 52).
• Some PC models cannot be connected to this TV.
• An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
PC audio
output
The HDMI input can accept and display VGA, 480i (60Hz),
480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/
60Hz) signal formats. For detailed signal specifications, see
page 61.
Note:
• The edges of the images may be hidden.
• If receiving a 720p, 1080i, or 1080p signal program, Native
mode scales the video to display the entire picture within the
borders of the screen (i.e. no overscanning).
19
Chapter 3: Using the remote control
Preparing the remote control
for use
• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
Your TV remote control can operate your TV and many other
devices such as cable converter boxes, satellite receivers,
VCRs, DVD players, and HTIBs (home theater in a box), even
if they are different brands.
Remote control effective range
If you have a Toshiba device:
For optimum performance, aim the remote control directly at
the TV and make sure there is no obstruction between the
remote control and the TV.
Your TV remote control is preprogrammed to operate most
Toshiba devices (- page 24).
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
Point remote control
toward remote sensor
on front of TV.
You can program the TV remote control so it will operate the
other device (- pages 22–26).
Installing the remote control
batteries
16.4 ft (5m)
1
Remove the battery cover from the back of the remote
control.
Squeeze tab
and lift cover.
2
Install two “AAA” size batteries, making sure to match
the + and – signs on the batteries to the signs on the battery
compartment.
3
Reinsert the battery cover in the remote control until the
tab snaps.
Caution: Never throw batteries into a fire.
Note:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
20
Chapter 3: Using the remote control
Learning about the remote control
The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the
remote control functional key chart (- page 23).
1
POWER turns the TV on and off. When the TV is on, the
green LED indicator on the TV front will be illuminated.
2
PIC MODE selects the picture mode (- page 42).
3
SLEEP accesses the sleep timer (- page 52).
4
PIC SIZE cycles through the picture sizes: Natural,
TheaterWide 1/2/3, Full, 4:3 HD, and Native (page 39).
5
Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
(- page 38) or to edit the Favorites List (- page 36).
6
INPUT selects the video input source (- page 35).
7
CH Bb cycles through programmed channels when no
menu is on-screen (- page 30).
8
VOL + – adjusts the volume level.
9
FAV BROWSER accesses the Favorites List in the
Channel Brower™ (- page 36).
10 RECALL displays TV status information (- page 53).
11 CH RTN returns to the last viewed channel or source
(- page 38).
12 MUTE reduces or turns off the sound (- page 44).
13 INFO displays TV status information as well as program
details, when available (- page 53).
14 3 C / # c While watching TV, these buttons open the
Channel Browser™ and tune to the previous/next channel
in the channel history (- page 37). (Also see “Arrow
buttons.”)
15 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3 C / # c.)
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system (- pages 27
and 28).
18 EXIT closes on-screen menus.
19 MODE SELECT switch switches between TV,
CABLE/SAT, AUX 1, and AUX 2 modes (- page 22).
Set to “TV” to control the TV.
Note: The error message “Not Available” may appear if you
press a key for a function that is not available.
21
Chapter 3: Using the remote control
Using the remote control to control
your other devices
If you have a non-Toshiba device or a Toshiba device that the
remote control is not preprogrammed to operate, you must first
program the remote control to recognize the device (if you
have not already done so) (- pages 24–26).
1
POWER Turns the selected device on and off.
2
Channel Numbers (0-9) Press to directly access
channels (as opposed to < ,).
3
+10 Press to directly access DVD chapters higher than 10.
4
TOP MENU Accesses a DVD’s top menu.
5
CH Bb For channels programmed into the channel
memory (- page 38):
B selects the next higher channel.
b selects the next lower channel.
6
GUIDE Displays the channel guide in the CABLE/SAT
mode.
SET UP Accesses a DVD’s setup menu in the AUX
mode.
7
INFO Displays TV status information on-screen.
8
BbC c Press to navigate DVD menus (may not work on
some DVD players).
9
ENTER Required by some satellite receivers and DVD
players to activate certain functions.
To use your TV remote control to operate a:
• Cable converter box or satellite receiver, set the MODE
SELECT switch to CABLE/SAT.
• VCR, set the MODE SELECT switch to AUX 1.
• DVD player or HTIB, set the MODE SELECT switch to
AUX 2.
Note: Even after the TV remote control is programmed, it may
not operate certain features on any other devices. If this
happens and you wish to use those features, you will need to
use the device’s original remote control.
Point the remote control
directly at the device.
10 DVD CLEAR Press to reset the title and chapter number.
11 PLAY Begins playback of a tape or DVD.
12 PAUSE Press during play or record mode to pause the
picture; press again to restart.
13 STOP Stops the tape or DVD.
14 SKIP z Skips forward to locate later DVD chapters.
15 FF Fast-forwards the tape or DVD. (Press during play
mode to view the picture moving rapidly forward.)
16 SKIP Z Skips back to beginning of current DVD
chapter, or locates previous chapters.
17 REW Rewinds/reverses the tape or DVD. (Press during
play mode to view the picture moving rapidly backward.)
18 TV/VCR To view one program while recording another,
press to select TV mode.
16
17
18
19
22
SEARCH selects a specific DVD chapter, title or time.
19 REC Starts tape recording.
20 MODE SELECT switch Set to “TV” to control the TV;
“CABLE/SAT” to control a cable converter box or
satellite receiver; “AUX 1” to control a VCR; “AUX 2” to
control a DVD player or HTIB.
Chapter 3: Using the remote control
Remote Control functional key chart
Note:
• “---” = key does not send a signal in that remote control mode.
• “sTV” = key will affect the TV, even though the remote control is in another mode.
• * Not available for your TV.
REMOTE CONTROL KEY
POWER
SLEEP
PIC SIZE
PIC MODE
1-9
0
100/–/+10
INPUT
FAV BROWSER/
TOP MENU
MUTE
SET UP/GUIDE
VOL + –
CABLE
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
--s TV
SAT (satellite)
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
– (sub CH)
s TV
AUX 1 (VCR)
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
100
s TV
AUX 2 (DVD or HTIB)
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
+10
s TV
---
---
---
Top Menu
s TV
--s TV
Channel
up/down
s TV
s TV
SAT Guide
s TV
Channel
up/down
s TV
s TV
--s TV
Channel
up/down
s TV
s TV
Setup
s TV
---
---
---
DVD Return
INFO
ENTER
Toshiba TV
Power
Sleep timer
Picture size
PIC MODE
Digit 1-9
Digit 0
– (sub CH)
TV/Video select
FAV BROWSER
DVD TOP Menu*
Sound mute
Guide*
Volume up/down
Channel
up/down
RECALL
Previous channel
DVD previous menu*
Info
Enter
-----
-----
Display
Enter
Bb
Menu up/down
---
Info
Select, Enter
Menu
up/down
---
Menu up/down
C3
Menu left/
Channel Browser™
Menu right/
Channel Browser™
Menu
Exit
DVD clear*
Pause*
Play*
Stop*
Skip REV*
Skip FWD*
Rewind*
Fast FWD*
---
Menu left
---
Menu left
---
Menu right
---
Menu right
---
Action Menu
---
DVD Menu
---
Exit
---
DVD Clear
---------------
---------------
Pause
Play
Stop
----Rewind
Fast FWD
Pause
Play
Stop
Skip REV
Skip FWD
Rewind
Fast FWD
DVD search*
---
---
TV/VCR
DVD search
REC MENU*
SLOW REW*
SLOW FWD*
Angle*
Sub title*
Audio*
Eject*
---------------
---------------
Record (2 click)
-------------
------DVD Angle
DVD Sub title
DVD Audio
DVD Eject
CHBb
RECALL
CH RTN/DVD RTN
c#
MENU
EXIT/DVD CLEAR
PAUSE/STEP
PLAY
STOP
SKIP Z
SKIP z
REW
FF
TV/VCR/
SEARCH
REC
SLOW –
SLOW +
ANGLE
SUB TITLE
AUDIO
EJECT
--s TV
23
Chapter 3: Using the remote control
Programming the remote control
to control your other devices
Your Toshiba TV remote control is preprogrammed to operate
most Toshiba devices. To program your TV remote control to
operate a non-Toshiba device (or a Toshiba device that it is not
preprogrammed to operate), follow the steps below. For details
on using the remote control to operate the device, see page 22.
1
In the remote control code table (- page 25), find the
code for your device. If more than one code is listed, try
each one separately until you find one that works.
2
Set the MODE SELECT switch to the type of device
you are programming the remote control to operate —
CABLE/SAT (for a cable converter box or satellite
receiver), AUX 1 (for a VCR or TV/VCR combo), or
AUX 2 (for a DVD player or HTIB [home theater in a
box]).
3
While holding down E, press the Channel Number
buttons to enter the 3-digit code for your device.
4
To test the code, turn on the device, point the remote
control at it, and press p. See notes below.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1–4 using
another code.
• If the device does not respond to another code, you will
need to use the remote control that came with the
device.
5
Remember to set the MODE SELECT switch back to
“TV” to control the TV.
6
For future reference, write down the code(s) you used:
DEVICE
CODE
DEVICE
CODE
Note:
• In addition to POWER, confirm that all necessary keys on the
TV remote control operate your device. If some keys are not
operational, repeat the device code setup using another
code (if other codes are listed for your device). If, after trying
all listed codes, the necessary keys do not operate your
device, use the device’s original remote control.
• Every time you change the batteries, you will need to
reprogram the remote control.
• Some newer VCRs respond to either of two codes. These
VCRs have a switch labeled “VCR1/VCR2.” If your VCR has
this kind of switch and does not respond to the codes for
your VCR brand, set the switch to the other position (“VCR1”
or “VCR2”) and reprogram the remote control.
24
Chapter 3: Using the remote control
Remote control codes
In some cases you may not be able to
operate your device with the TV
remote control. Your other device may
use a code that is not recognized by the
TV remote control. If this happens, use
the device’s remote control.
Cable converter box
ABC
Archer
Cableview
Century
Citizen
Contec
Diamond
GE
Gemini
Hamlin
Hitachi
Jasco
Motorola/GI/Jerrold
Magnavox
Memorex
Multi Canal
Novavision
Panasonic
Philco
Philips
Pioneer
Proscan
Radio Shack
RCA
Realistic
Recoton
Samsung
Scientific Atlanta
Sears
Signature
Signature 2000
Sprucer
Starcom
Stargate
Sylvania
TeleView
Texscan
Tocom
U. S. Electronics
United Cable
Universal
Wards
061, 062, 063, 082,
084, 087, 092,
096, 098
065, 092, 097, 099
064, 094
092
090, 092, 097
083, 085, 086, 088,
093, 098
093
061, 062
069, 070, 094
093
062, 095, 096
097
062, 069, 071, 082,
086, 089, 096, 107
072, 096
092, 104
090
101
081, 083, 085
087
066, 067, 068, 070,
072, 073, 074, 075,
092
076, 077
061, 062
092, 097, 099
064, 081
065
102
077, 090
063, 078, 079, 080,
088, 098, 101, 105
095
062
096
081, 085
069, 082, 087, 096,
103, 104
069, 090
095, 100
090
100
071, 084, 085
087, 096, 098
082
065, 092, 097, 099,
102, 103
096
Echostar
Express Vu
Fujitsu
GE
General Instruments
Hitachi
Hughes
Hughes Network
Systems
Intersat
Janeil
JVC
Kenwood
Magnavox
Optimus
Pansat
Primestar
Proscan
Radio Shack
RCA
Realistic
Samsung
Sony
Star Choice
Star Trak
STS
Toshiba
Uniden
Zenith
020, 040, 044, 046,
050, 053
018, 041, 051
057
027
008, 009, 013
010, 011, 012, 022,
023, 031, 049
033
033
019
048
027
017, 057
029
060
058
036, 052
015, 042
008, 009, 013
022, 023, 030
008, 009, 013, 016
030
059
014, 055
057, 106
025, 026, 037, 054
024
000, 001, 002, 003,
004, 005, 006, 007,
020, 031, 056
021, 028, 030, 032,
035, 039, 043, 045,
047, 058
027
TV/VCR Combo
Action
GE
Goldstar
Panasonic
Precision
Quasar
Realistic
Sony
Toshiba
Zenith
Totevision
078
059, 062
065
065
078
065
079
074
057
065
009, 010, 065
DVD/VCR Combo
Go Video
JVC
RCA
Samsung
Sanyo
Zenith
DVD=087,
VCR=081
DVD=088,
VCR=082
DVD=089,
VCR=083
DVD=090,
VCR=084
DVD=091,
VCR=085
DVD=092,
VCR=086
DVD player
Satellite receiver
Alphastar
Chaparral
DISH Network
Drake
038, 059
034
057
Aiwa
Apex
BOSE
Broksonic
006, 015
016, 017
097
018
Clarion
Classic
Daewoo
Denon
Emerson
Fisher
Funai
GE
Go Video
GPX
Hitachi
JVC
Kenwood
Konka
Magnavox
Memorex
Mintek
NAD
Nakamichi
Norcent
Onkyo
Oritron
Panasonic
Philips
Pioneer
Proscan
Qwestar
RCA
Sampo
Samsung
Sansui
Sanyo
Sharp
Sherwood
Sony
Sylvania
Teac
Technics
Techwood
Toshiba
Yamaha
Zenith
019
020
021
022, 023, 024, 025
026, 027
028
027
001, 029, 030
087
031
005, 032, 033, 034,
035
003, 007, 036, 042,
088
037
008, 009
004, 038
039
040
026
041
043
044
058
010, 045, 046, 047,
048, 049, 050
004, 051
052, 053, 054, 055
001, 056
057, 058
001, 002, 059, 089
060
061, 062, 086, 090
073
063, 091
064, 067
074
011, 012, 065, 066,
068, 069, 070
027
071
072
075
000, 013, 076, 077,
078
079, 080, 081
014, 082, 092
Portable DVD player
Aiwa
Audiovox
Panasonic
RCA
093
094, 095
024, 096, 099
098
VCR
Admiral
Aiko
Aiwa
Akai
Audiovox
Bell & Howell
Broksonic
Calix
Carver
CCE
Citizen
Colortyme
049
019
018
003, 004, 037, 038,
039, 058, 069
010
007, 068
008, 017
010
026
019
009, 010, 011, 012,
013, 014, 015, 019,
057, 073
005
(continued)
25
Chapter 3: Using the remote control
Craig
Curtis Mathes
Daewoo
Daytron
Denon
Dimensia
Electrohome
Emerson
Fisher
Fuji
Funai
Garrard
GE
Go Video
Goldstar
Gradiente
Harman Kardon
Hitachi
JBL
JC Penney
Jensen
JVC
Kenwood
Kodak
LG
Lloyds
Logik
LXI
Magnasonic
Magnavox
Marantz
Memorex
MGA
MGN
Minolta
Mitsubishi
Montgomery Ward
Motorola
MTC
Multitech
NEC
Nikko
Noblex
Optimus
Optonica
26
009, 010, 016, 061,
065, 079
001, 005, 009, 012,
014, 040, 048, 053,
056, 057
011, 013, 015, 017,
018, 019, 057, 078
078
063
001, 048
010, 020, 065
003, 008, 010, 011,
017, 018, 020, 028,
039, 054, 057, 062,
065, 068, 072
007, 016, 021, 022,
023, 057, 064, 068,
070, 071, 079
004, 041
018, 073
018
001, 002, 009, 040,
042, 048, 056
056, 059, 061, 081
005, 010, 014, 054,
056, 065, 067
018, 065
005
024, 025, 035, 037,
042, 063, 070, 080
076
005, 006, 007, 008,
009, 010, 023, 024,
025, 026, 035, 056,
061, 063, 065
024, 025, 037, 050
005, 006, 007, 014,
037, 043, 055, 062,
063, 068, 082
005, 006, 007, 012,
014, 037, 043, 050,
053, 068, 071
010
010
053, 073, 079
061
010
061, 065, 078
026, 027, 034, 044,
057, 061, 072
005, 006, 007, 012,
014, 026, 053, 067
007, 009, 010, 016,
018, 034, 049, 063,
065, 066, 068, 075,
079
020, 028, 039
056
024, 025, 035, 063
020, 024, 025, 028,
039, 043, 065
049
049
009, 046, 061
009, 012, 018
005, 006, 007, 012,
014, 037, 043, 053,
054, 067, 070
010
009
010, 049, 065
031
Orion
Panasonic
Pentax
Pentex Research
Philco
Philips
Pioneer
Portland
Proscan
Proton
Quasar
Radio Shack
Radio Shack/Realistic
Radix
RCA
Realistic
Ricoh
Runco
Samsung
Sansui
Sanyo
Scott
Sears
Sharp
Shintom
Signature
Signature 2000
Singer
Sony
STS
Sylvania
Symphonic
Tandy
Tashiko
Tatung
Teac
Technics
Teknika
Toshiba
Totevision
Unitec
Unitech
Vector Research
054, 057, 062, 065,
068, 072
036, 045, 046, 057,
061, 072, 079
012, 024, 025, 035,
042, 053, 063
014
026, 027, 063
026, 031, 044, 057
006, 024, 043, 055
012, 013, 015
001, 002, 048
061
045
010, 031, 065
007, 009, 010, 016,
018, 020, 021, 022,
031, 049
010
001, 002, 003, 009,
024, 025, 029, 035,
040, 042, 045, 048,
055, 056, 063, 071,
083
007, 009, 010, 011,
016, 018, 020, 021,
022, 031, 049, 051,
056, 060, 065, 075,
079
047
034
009, 011, 038, 056,
073, 084
006, 037, 043, 061
007, 009, 016, 054,
064, 068, 071, 075,
079, 085
008, 011, 017, 028,
030, 057, 065, 072
007, 010, 016, 021,
022, 023, 024, 025,
035, 053, 057, 063,
064, 065, 068, 071,
075, 079
013, 020, 031, 049,
051, 060, 066
004, 025, 032, 061
049
075
047, 061
004, 032, 033, 041,
052, 058, 070, 074,
076, 077, 080
035
018, 026, 027, 028,
044, 072
018, 050, 051, 053,
073, 079
007
010
037
018, 029, 037
036
010, 018, 065
000, 011, 021, 023,
024, 028, 030, 039,
057, 074, 078, 079
009, 010, 065
073
009
005, 006, 011, 012,
053
Video Concepts
Wards
White Westinghouse
XR-1000
Yamaha
Zenith
005, 006, 011, 012,
039, 053
009, 010, 011, 016,
018, 020, 024, 025,
031, 035, 049, 051,
056, 057, 060, 065,
066, 079
073
018
005, 006, 007, 014,
037, 053
004, 032, 034, 041,
047, 069, 086
HTIB
Lasonic
Panasonic
Venturer
083
084
085
Chapter 4: Menu layout and navigation
Main menu layout
The tables below and on the next page provide a quick overview of your TV’s menu system.
To open the main menus (illustrated below), press Y on the remote control or TV control panel.
Icon
Video
Audio
Preferences
Locks
Setup
Item
Mode
Picture Settings
Noise Reduction
Game Mode
Theater Settings
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
CC Selector
Base CC Mode
Digital CC Settings
Input Labeling
Channel Labeling
Menu Language
Channel Browser Setup
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Front Panel Lock
New PIN Code
Installation
Sleep Timer
PC Settings
Power-On Mode
Option
S Sports/Standard/Movie/Preference
S [Opens the Picture Settings menu]
S [Opens the Noise Reduction menu]
S On/Off
S [Opens the Theater Settings menu]
S [Launches the temporary Audio Selector]
S [Opens the Audio Settings menu]
S [Opens the Advanced Audio Settings menu]
S [Opens the Audio Setup menu]
S [Launches the temporary CC Selector]
S Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4
S [Opens the Digital CC Setup menu]
S [Opens the Input Labeling menu]
S [Opens the Channel Labeling menu]
S English/French/Spanish
S [Opens the Channel Browser Setup menu]
S Off/On
S [Opens the Edit Rating Limits menu]
S [Opens the Channels block menu]
S Off/Video/Video+
S Off/On
S [Opens the New PIN Code entry screen]
S [Opens the Installation menu (- page 28)]
S [Opens the Sleep Timer menu]
S [Opens the PC Settings menu]
S Power-Saving/Fast
27
Chapter 4: Menu layout and navigation
Setup/Installation menu layout
The Installation menu contains the Terrestrial and System Status menus.
To open the Installation menu (illustrated below), press Y on the remote control or TV control panel, open the Setup menu,
select Installation, and press T.
Icon
Press Y,
Terrestrial
open the
Setup menu,
and then
open the
Installation System Status
sub-menu.
Item
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
Option
S [Opens the Input Configuration menu]
S [Start] S [Scans for new channels on ANT]
S [Opens the Channel Add/Delete menu]
S [Opens the Signal Meter menu]
System Information
S [Opens the System Information screen]
Navigating the menu system
You can use the buttons on the remote control or TV control
panel to access and navigate your TV’s on-screen menu
system.
• Press Y to open the menu system.
• When a menu is open, use the up/down/left/right arrow
buttons (BbC c) on the remote control or TV control panel
to move in the corresponding direction in the menu.
• Press T to save your menu settings or select a highlighted
item. (A highlighted menu item appears in a different color
in the menu.)
• All menus close automatically if you do not make a selection
within 60 seconds, except the signal meter menu, which
closes automatically after about 5 minutes.
• To close a menu instantly, press O.
Note:
• The menu background may sometimes appear black,
depending on the signal the TV is receiving. This is not a
sign of malfunction.
Video
Mode
Sports
Picture Settings
Noise Reduction
Off
Game Mode
Theater Settings
Navigate
CH RTN Back
ENTER Select
• The Video sub-menu appears with a black background,
which looks different from other menus.
Picture Settings
Mode: Sports
Contrast
100
Back Light
100
DynaLight
On
Brightness
50
Color
50
Tint
0
Sharpness
50
Advanced Picture Settings
Reset
28
EXIT Exit
Done
Chapter 5: Setting up your TV
Selecting the menu language
You can choose from three different languages (English,
French and Spanish) for the on-screen display of menus and
messages.
To select the menu language:
1
2
3
Press Y and open the Preferences menu.
Configuring the antenna input
source for the ANT terminal
To configure the ANT input source:
1
2
Press Y and open the Setup menu.
Highlight Installation and press T.
Highlight Menu Language and press c.
Press B or b to select your preferred menu language and
press T.
Setup
Installation
Sleep Timer
PC Settings
Power-On Mode
Preferences
3
CC Selector
Base CC Mode
Off
Digital CC Settings
Input Labeling
Power-Saving
(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Input Configuration, and press T.
Channel Labeling
Menu Language
Channel Browser Setup
English
English
Installation
Français
Terrestrial
Español
4
Input Configuration
Press O to close the Preferences menu.
Channel Program
Channel Add/Delete
Signal Meter
4
Press C or c to select the input source (Cable or
Antenna) for the ANT input on the TV.
Input Configuration
Antenna In
Cable
Cancel
5
Done
To save your new settings, highlight Done and press T.
To revert to your original settings, highlight Cancel and
press T.
29
Chapter 5: Setting up your TV
Programming channels into the
TV’s channel memory
4
When you press < or , on the remote control or TV control
panel, your TV will stop only on the channels you programmed
into the TV’s channel memory.
Follow the steps below to program channels into the TV’s
channel memory.
(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Channel Program to bring up the Start, and press T
again to begin channel programming.
Installation
Terrestrial
Input Configuration
Start
Channel Program
Channel Add/Delete
Signal Meter
Programming channels automatically
ANT
Cable
Scanning channels, please wait ...
Your TV can automatically detect all active channels in your
area and store them in its memory. After the channels are
programmed automatically, you can manually add or erase
individual channels in the channel memory.
Note:
• You must configure the antenna input source before
programming channels (- page 29).
• If the Antenna input signal type is set to Cable, the automatic
channel programming process erases channels that were
previously programmed into the TV’s memory.
• If the Antenna input signal type is set to Antenna, the
automatic channel programming process adds newly found
channels to the existing set of programmed channels (and
does NOT erase channels that were previously
programmed into the TV’s memory.) To remove an Antenna
source channel from the memory, you must manually delete
it.
• To tune the TV to a channel not programmed in the channel
memory, you must use the Channel Number buttons on the
remote control.
• Programming channels when the antenna input is
configured for Cable will take substantially longer than when
the antenna input is configured for Antenna. This is normal;
however, once channel programming is finished, you should
not have to repeat the programming process again unless
your Cable TV service lineup changes significantly.
To program channels automatically:
1
Configure the antenna input source, if you have not
already done so (- page 29).
2
3
Press Y and open the Setup menu.
Highlight Installation and press T.
52%
Number of Channels Found - 73
Scanning Digital Channels
Found Channel - 118
Abort
The TV will automatically cycle through all the antenna
channels, and store all active channels in the channel
memory. While the TV is cycling through the channels,
the message “Scanning channels, please wait” appears (as
shown above).
5
To cancel channel programming, press O on the remote
control (or highlight Abort in the on-screen display and
press T).
When channel programming is finished, press < or , to
view the programmed channels.
Manually adding and deleting channels
in the channel memory
After automatically programming channels into the channel
memory, you can manually add or delete individual channels.
To add or delete channels in the channel memory:
1
2
3
Press Y and open the Setup menu.
Highlight Installation and press T.
(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Channel Add/Delete, and then press T.
Installation
Terrestrial
Input Configuration
Channel Program
Setup
Channel Add/Delete
Installation
Signal Meter
Sleep Timer
PC Settings
Power-On Mode
30
Power-Saving
Chapter 5: Setting up your TV
To add a channel to the channel memory:
Highlight the unchecked box next to the channel number you
want to add, and then press T to check the box.
To manually add digital subchannels on a physical
channel:
Use the Channel Numbers and the Dash (=) on the remote
control to enter the channel number (for example, 56–1).
If the channel is found, the number will be added to the list and
the box will be checked.
If the channel is not found, a message will appear.
To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press T to uncheck the box.
Labeling channels
A list of common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the Channel
Labeling window. If the desired channel label is not provided
in the list, you will be able to manually enter/edit labels using
the software keyboard.
To assign channel labels:
1
2
Press Y and open the Preferences menu.
Highlight Channel Labeling and press T.
The Channel Labeling window opens.
To save your new settings:
Highlight Done and press T.
Preferences
CC Selector
Off
Base CC Mode
To revert to your original settings:
Highlight Cancel and press T before saving.
Off
CC1
Digital CC Settings
CC2
Input Labeling
CC3
Channel Labeling
To remove all channels from the channel memory:
CC4
English
Menu Language
T1
Channel Browser Setup
Highlight Reset and press T, and then highlight Done and
press T.
T2
Channel Labeling
{No Label}
Channel Add/Delete
A&E
ANT
24
A&E
2
Analog
ABC
2-1
Digital
ABCFAM
2-2
Digital
ABCHD
3
Analog
AMAX
4
Analog
AMAXW
Custom
5
Digital
AMC
Clear All
6
Analog
ANIMAL
Done
7
Analog
Reset
7-1
Digital
Cancel
8
Analog
Done
To remove encrypted channels from the channel
memory:
If an encrypted channel is accidentally added to the channel list
by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tunes to an encrypted channel, the
following message will appear.
Press CH UP/DOWN to
change channels.
3
4
Press < or , to select the channel you want to label.
5
6
Repeat steps 3 and 4 for other channels.
Press BbC c to highlight the desired channel label and
press T.
To save your settings, highlight Done and press T.
Channel Labeling
{No Label}
ANT
A&E
24
ABC
A&E
ABCFAM
Press CH UP/DOWN to
change channels.
ABCHD
Digital Channel Is Encrypted - Press 1 on remote to remove channel
AMAX
Press “1” button while the message is on the screen to
remove the unnecessary channel from the channel list.
AMAXW
Custom
AMC
Clear All
ANIMAL
Done
The maximum number of labels that can be stored is 128.
To remove channel labels:
1
2
Open the Channel Labeling window.
Press < or , to select the channel for which you want to
remove the label.
(continued)
31
Chapter 5: Setting up your TV
3
Press BbC c to highlight No Label and press T.
3
Channel Labeling
{No Label}
Channel Labeling
ANT
24
A&E
Highlight Yes from the deletion confirmation window
and press T.
TIMES
ABC
TLC
Press CH UP/DOWN to
change channels.
ABCFAM
TMC
ABCHD
TMCX
AMAX
4
5
Custom
AMC
Clear All
ANIMAL
Done
No
TMCw
Repeat steps 2 and 3 for other channels.
To save your settings, highlight Done and press T.
To create and assign a custom label:
4
TNT
Custom
TNTHD
Clear All
TOCDEFG
Done
Setting the HDMI™ audio mode
To set the HDMI audio mode:
Press < or , to select a channel you want to label.
1
2
3
Press Bb c to highlight Custom and press T.
The software keyboard will appear.
{No Label}
ANT
A&E
24
ABC1 1
A&E
A BCHCRTN
a Cancel
b c 2
2Edit
Send
Exit
E F d
e f 3
3 D EXIT
Press CH UP/DOWN to
4
4 G H I g h ichange
5
ABCFAM
channels. J K L j k l 5
6 MNOmn o 6
7 PQR S p q r s 7
ABCHD
_
100 Backspace
8 T U V t u v 8
0 0
AMAX
9 WX Y Zw x y z 9
Yes
Highlight Done and press T to save changes, and go
back to the Channel Labeling window.
Open the Channel Labeling window.
Channel Labeling
Press Y and open the Audio menu.
Highlight Audio Setup and press T.
Press B or b to select HDMI 1 Audio and then press
C or c to select the HDMI 1 audio mode (Auto, Digital,
or Analog). (Auto is the recommended mode.) See
“Connecting an HDMI or DVI device to the HDMI input”
(- page 17).
INPUT Space
Audio Setup
AMAXW
4
Delete the selected custom label?
Press CH UP/DOWN to
change channels.
TMCXw
AMAXW
If the desired channel label is not available from the list of
presets, you can create a custom label.
1
2
3
ANT
24
AMC
Clear All
ANIMAL
Done
PC Audio
No
HDMI 1 Audio
Auto
MTS
Stereo
Language
English
Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.
Optical Output Format
Dolby Digital
Compressed
5
Dolby Digital
Dynamic Range Control
The highlighted character is entered after you either press
a different key, press c key, or after a two-second pause.
Reset
6
Repeat steps 4 and 5 until you have entered all desired
text.
7
8
When finished, press T.
(New labels will be added to the list in alphabetical order
and marked with an icon to indicate that they are
custom.) Highlight the new custom label and press T to
assign. Assigned channel labels will be displayed in the
banner, Channel Add/Delete window, and Channels
Block window.
To delete the custom label:
1
2
Open the Channel Labeling window.
Highlight the label to be deleted and press =.
32
Done
Note: Because the PC and HDMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the
HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to
“Yes,” the HDMI 1 Audio setting is set to “Digital” and is
grayed out in the menu. (Also see item 4 on page 11 and
“Setting the PC Audio” on page 52.)
Chapter 5: Setting up your TV
Viewing the digital signal meter
Viewing the system status
You can view the digital signal meter in the ANT digital TV
input source only.
To view the system status:
To view the digital signal meter:
1
2
3
Press Y and open the Setup menu.
Highlight Installation and press T.
1
2
3
A new set of Installation menu icons will appear, as shown
below. Open the Terrestrial menu, highlight Signal
Meter, and press T.
Press Y and open the Setup menu.
Highlight Installation and press T.
A new set of Installation menu icons will appear, as shown
below. Open the System Status menu, highlight
System Information, and press T.
Installation
System Status
System Information
Installation
Terrestrial
4
Input Configuration
Channel Program
Press C c to scroll through the menu bar to select the
Software Version and view the related information.
Channel Add/Delete
System Information
Signal Meter
Software Version
4
HL07
3.2.21.0
Nov 17 2006 - 01:52:20
FW: 0B
Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
Signal Meter
To close the screen and return to the Installation
menu:
Highlight Done and press T.
To return to normal viewing:
Signal Locked
0
Peak
Physical Digital Channel
0
Press O.
4
Virtual Digital Channel
Advanced
Done
4-1
Done
Reset Factory Defaults
To close the screen and return to the Terrestrial
menu:
To reset all settings and channels to their factory
default values:
Highlight Done and press T.
1
2
Press Y and open the Setup menu.
3
Open the System Status menu, highlight System
Information, and press T.
4
Press C c to scroll through the menu bar to select
Factory Defaults.
To return to normal viewing:
Press O.
Highlight Installation and press T. A new set of
Installation menu icons will appear.
System Information
Factory Defaults
This window provides the ability to reset the TV
settings.Type in your PIN now (or "0000" if no
PIN has been set) to restore settings to their
factory default values.
Done
5
Enter your PIN code (or 0000 if no PIN code has been set).
(continued)
33
Chapter 5: Setting up your TV
6
Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
No
To cancel the reset:
Highlight No and press T.
Yes
Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
• Power-Saving mode keeps power consumption in standby
mode to below 3W. As a result, it takes a bit longer to turn
on.
• Fast mode increases power consumption in standby mode.
As a result, the TV will turn on quicker. While in Fast
mode, the yellow LED on the TV front will be lit.
To set the Power-On Mode feature:
1
2
3
Press Y, and open the Setup menu.
Highlight Power-On Mode and press c.
Press B or b to select either Power-Saving or Fast.
Setup
Installation
Sleep Timer
PC Settings
Power-On Mode Power-Saving
Power-Saving
Fast
34
Chapter 6: Using the TV’s features
Selecting the video input source
to view
To select the video input source to view:
1
2
Press + on the remote control or TV control panel.
And then either:
a) Press 0–8; or
b) Repeatedly press Bb on the remote control and then
press T to change the input; or
c) Repeatedly press + on the remote control or TV
control panel to change the input.
The current signal source displays in the top right corner
of the Input Selection screen.
Input Selection
0
1
2
3
4
5
6
7
8
ANT
ANT
Video 1
Video 2
ColorStream HD1
ColorStream HD2
HDMI 1
HDMI 2
HDMI 3
PC
0 - 8 / INPUT to Select
Labeling the video input sources
You can label each video input source according to the type of
device you connected to each source, from the following preset
list of labels:
• – – (default label)
• Audio Receiver
• Cable
• Compact Disc
• DTV
• DVD
• Game Console
• HD DVD
• Laser Disk
• Satellite/DSS
• VCR
• Video Recorder
• Hide (to hide an unused input in the Input Selection screen)
Note: If you select PC in the Input Selection screen, you can
choose only “– –” or “Hide” as the label.
To label the video input sources:
Navigate
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- “Labeling the video input sources” at right).
• Sources can be “hidden” (- “Labeling the video input
sources” at right).
• “No Video Signal” will appear randomly on the screen if no
signal is received in video input mode.
1
2
3
Press Y and open the Preferences menu.
Highlight Input Labeling and press T.
Press B or b to highlight the video source you want to
label.
Preferences
CC Selector
Off
Base CC Mode
Off
CC1
Digital CC Settings
CC2
Input Labeling
CC3
Channel Labeling
Menu Language
Channel Browser Setup
CC4
English
T1
T2
Input Labeling
Video 1
VCR
Video 2
Cable
ColorStream HD 1
Video Recorder
ColorStream HD 2
Hide
HDMI 1
DTV
HDMI 2
Satellite/DSS
HDMI 3
DVD
PC
-Reset
Done
(continued)
35
Chapter 6: Using the TV’s features
4
Press C or c to select the desired label for that input
source. If a particular input is not used, you can select
Hide as the label, which will cause that input to be
“grayed out” in the Input Selection screen and skipped
over when you press + on the remote control.
5
To save the new input labels, highlight Done and
press T.
To revert to the factory default labels, highlight Reset
and press T.
Input labeling example:
The screen below left shows the default Input Selection
screen (with none of the inputs labeled as a specific device).
The screen below right is an example of how you could label
the inputs if you connected a VCR to VIDEO 1, Cable TV to
VIDEO 2, a video recorder to ColorStream HD1, a DTV settop box to HDMI 1, a satellite/DSS set-top box to HDMI 2, and
a DVD player to HDMI 3. Also note that the ColorStream HD2
input is labeled “Hidden,” which means that input will be
skipped over when + is pressed.
Input Selection
0
1
2
3
4
5
6
7
8
ANT
Input Selection
0
1
2
3
4
5
6
7
8
ANT
Video 1
Video 2
ColorStream HD1
ColorStream HD2
HDMI 1
HDMI 2
HDMI 3
PC
0 - 8 / INPUT to Select
Input Selection screen with
no inputs labeled.
1
2
3
Press Y and open the Preferences menu.
Highlight Input Labeling and press T.
Highlight Reset and press T.
The Channel Browser™ provides an easy navigation interface
for all your channels and inputs. This feature allows you to:
• Navigate the contents of all of your inputs.
• Keep a list of your favorite channels (see “Favorites
Browser,” below).
• Keep a history of the last 32 channels or inputs viewed.
• Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser™ History List (illustrated on the
next page).
• Surf via Browse mode (to immediately tune channels as you
highlight them in the Channel Browser™) or Select mode (to
surf over channels in the Channel Browser™ before you
select one to tune).
• Quickly change inputs from the Inputs List.
The Favorites Browser allows you to quickly set up a favorite
channels/inputs list that is integrated into the Channel Browser™.
To add a favorite channel/input:
Navigate
Input Selection screen with
all inputs labeled except input 4,
which has been hidden.
To clear the input labels:
Tuning channels using the
Channel Browser™
Favorites Browser
PC
0 - 8 / INPUT to Select
Navigate
ANT
ANT
VCR
Cable
Video Recorder
ColorStream HD2 (Hidden)
DTV
Satellite/DSS
DVD
Tuning channels
1
2
Tune to the channel or input.
Press and hold n for 3 seconds.
Note: Additions are added to the beginning of the Favorites list
on the left side of the Channel Browser™.
To delete a favorite channel/input:
1
2
Press n to open the Favorites browser list.
3
Press and hold = for 3 seconds. The channel/input will
be removed from the Favorites list.
Highlight the channel or input to delete by pressing
3 C or # c.
To set up the Channel Browser™:
1
2
3
Press Y and open the Preferences menu.
Highlight Channel Browser Setup and press T.
Press B to highlight Navigation, and then press C or c
to select either Browse Mode or Select Mode.
Channel Browser Setup
Navigation
Select Mode
History List
Power Off Clear (On)
ANT List
On
Inputs List
On
Favorites List
On
Reset
36
Done
Chapter 6: Using the TV’s features
4
Press b to highlight History List, and then press C or c
to select the setting you prefer: either Power Off Clear
(On), On, or Off.
Note: When History List is set to On and the Power-On
Mode (- page 34) is in Fast mode, the channels and
inputs stored in the list will be saved every power on/off
cycle. When History List is set to Power Off Clear (On),
the channels and inputs stored in the list will be cleared
with every power on/off cycle of the TV.
5
Press b to highlight ANT List, and then press C or c to
select On or Off.
6
Press b to highlight Inputs List, and then press C or c
to select On or Off.
7
Press b to highlight Favorites List, then press C or c to
select On or Off.
8
To save your entries, highlight Done and press T.
To return to factory defaults, highlight Reset and
press T.
• If all lists are turned off, pressing 3 C, # c, or n will
not display the Channel Browser™. If Favorites List is
turned off, n will have no effect.
• Pressing n will bring up the Channel Browser™
Favorites list regardless of the last selected list in the
Channel Browser™.
To tune to a channel or input in Browse mode:
1
While watching TV, press 3 C or # c to open the
Channel Browser™ and surf back to a previous item or
surf forward to the next item in the list.
In Browse mode, when you stop on an item in the
Channel Browser™, it will be highlighted and the TV will
automatically tune to the channel or input.
2
Press O to close the Channel Browser™.
To tune to a channel or input in Select mode:
1
While watching TV, press 3 C or # c to open the
Channel Browser™ and surf back to a previous item or
forward to the next item in the list.
In Select mode, when you stop on an item in the Channel
Browser™, it will be highlighted but you must press T to
tune the TV to the highlighted item.
2
3
Press T to tune the TV to the highlighted item.
To open the Channel Browser™:
• Press 3 C or # c on the remote control.
• Press 3 C to surf backward through the previously tuned 32
channels in the History list, the channels in the ANT channel
list, the inputs in the Inputs list, or the favorite channels/
inputs in Favorites list.
• Press # c to surf forward through the channel History, the
ANT channel list, the Inputs list, or the favorite channels/
inputs in Favorites list.
Press O to close the Channel Browser™.
Adding and clearing channels and inputs in the
History List
Elements of the Channel Browser™
Adding channels and inputs to the History List:
1
2
3
4
History
88
10
2
TVLAND
11
ABCHD
5
3
8
WEATHER
6
1
Current list (History, ANT, Inputs, or Favorites)
2
Input type
3
Channel or input currently being viewed
4
Channel or input that is currently highlighted in the
browser
5
Channels stored in the History List
6
Channel labels
As a channel or input is tuned, the Channel Browser™ adds it
to the History List and displays it on the “right side” of the
Channel Browser™. Previously tuned channels/inputs are
“shifted” to the left, eventually moving off the left side. Press
3 C to surf backward through the previously tuned channels/
inputs. Any channel or input that is tuned repeatedly will not
be repeated in the History List, but instead is moved to the end
of the list on the right side of the Channel Browser™.
The Channel Browser™ will store the following channels:
• All channels that are tuned using the numeric buttons on the
remote control.
• All channels that are tuned using < or , on the remote
control.
Note: Whenever an item is selected that cannot be tuned (for
various reasons), the TV will automatically tune to the
previously viewed channel or input.
To toggle among the available lists:
After opening the Channel Browser™, press B or b to toggle
among History, ANT, Inputs, and Favorites.
Note:
• The Channel Browser™ opens in History List by default.
Once another list has been selected, the Channel Browser™
will open in the last selected list.
(continued)
37
Chapter 6: Using the TV’s features
Clearing channels from the History List:
• Reconfiguring the ANT input will clear the History List.
Note: See page 29 for details on configuring the antenna
input.
• Once 32 channels or inputs are stored in the History List, the
oldest item will be removed from the list when a new
channel or input is tuned.
• If History List in the Channel Browser Setup is set to
“Power Off Clear (On),” turning off the TV will clear the
History List.
Tuning to the next programmed channel
To tune to the next programmed channel:
Switching between two channels using
SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel
to the R button, so you can return to that channel quickly
from any other channel by pressing R. To memorize a
channel to the R button:
1
Tune the TV to the channel you want to program into the
R button.
2
Press and hold R for about 2 seconds until the message
“Channel Memorized” appears on-screen. The channel
has been programmed to the R button.
3
You can then change channels repeatedly, and when you
press R, the memorized channel will be tuned.
Press < or , on the remote control or TV control panel.
Note:This feature will not work unless you program channels
into the TV’s channel memory (- page 30).
Tuning to a specific channel (programmed
or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5.
Tuning digital channels:
Press the Channel Number (0–9) on the remote control,
followed by the dash (=) button and then the sub-channel
number. For example, to select digital channel 125-1, press 1,
2, 5, –, 1.
Note: If a digital channel is not programmed—either through
the automatic channel scan (- page 30) or the channel add/
delete function (- page 30)—you will have to tune the RF
channel using the Channel Number and dash (=) on the
remote control.
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
2
Select the first channel you want to view.
3
Press R on the remote control. The previous channel
will display. Each time you press R, the TV will switch
back and forth between the last two channels that were
tuned.
Select a second channel using the Channel Number
buttons (and the dash (=) button if selecting a digital
channel).
Note: If you press R from a non-antenna input, the TV
will return to the last-viewed input.
38
The TV will return to the memorized channel one time only.
Once you press R and then change channels again, the CH
RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last
two channels that are tuned. This feature also works for
external inputs.
Chapter 6: Using the TV’s features
Selecting the picture size
You can view many program formats in a variety of picture
sizes—Natural, TheaterWide 1, TheaterWide 2,
TheaterWide 3, Full, 4:3 HD and Native.
Note: The “picture size” illustrations are examples only. The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.
Note: If you select one of the TheaterWide® picture sizes, the
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only) or try viewing the
program in Full or Natural picture size.
Natural picture size
• The image is displayed close to its originally formatted
proportion. Some program formats will display with
sidebars and/or bars at the top and bottom.
You can save separate picture size preferences for each input
on your TV.
To select the picture size using the remote control:
1
2
Press I on the remote control.
Natural picture size example
While the Picture Size screen is open, you can do one of
the following to select the desired picture size:
• Repeatedly press I.
• Press the corresponding Number button (0–6) while the
Picture Size screen is open.
• Press B or b while the Picture Size screen is open.
TheaterWide 1 picture size (for 4:3 format programs)
• The center of the picture remains close to its original
proportion, but the left and right edges are stretched wider to
fill the screen.
Picture Size
0
1
2
3
4
5
6
Natural
TheaterWide 1
TheaterWide 2
TheaterWide 3
Full
4:3 HD
Native
TheaterWide 1 picture size example
TheaterWide 2 picture size (for letter box programs)
0 - 6 / PIC SIZE to Select
• The picture is stretched wider to fill the width of the screen,
To select the picture size using the menus:
1
2
3
but only slightly stretched taller.
• The top and bottom edges of the picture may be hidden. To
Select Picture Size in the Theater Settings menu.
Press C or c to select the desired picture size setting.
view the hidden areas, see “Scrolling the TheaterWide®
picture” (- page 40).
Highlight Done and press T.
Theater Settings
Mode: Sports
Picture Size
Full
Picture Scroll
--
Cinema Mode
Film
Auto Aspect Ratio
Reset
On
ABCDEFG----------------
TheaterWide 2 picture size example
Done
Note: Some of the picture sizes may not be available
depending on the receiving signal format (those will be
“grayed out” in the Picture Size screen).
Using these functions to change the picture size (i.e.,
changing the height/ width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
(continued)
39
Chapter 6: Using the TV’s features
TheaterWide 3 picture size (for letter box programs
with subtitles)
• The picture is stretched wider to fill the width of the screen,
but only slightly stretched taller.
• The top and bottom edges are hidden. To view the hidden
areas (such as subtitles or captions), see “Scrolling the
TheaterWide® picture.”
ABCDEFG----------------
Note:
• Native picture size is available for 720p, 1080i, and 1080p
signals only. If the signal being received is other than 1080i,
1080p, or 720p, “Native” will be grayed out in the Picture
Size screen.
• This mode is supported only for HDMI and ColorStream
inputs.
• Depending on the input signals, the border of the picture
may be hidden, displayed in black, or noisy.
ABCDEFG--------------------------
TheaterWide 3 picture size example
Native picture size example
Full picture size (for 16:9 [480i, 480p] source
programs only)
• If receiving a squeezed 4:3 format program, the picture is
stretched wider to fill the width of the screen, but not
stretched taller.
• None of the picture is hidden.
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
Full picture size example
1
2
4:3 HD picture size (for 720p, 1080i, and 1080p
program sources only)
Press Y and open the Video menu.
Highlight Theater Settings and press T.
Video
Mode
• Sidebars fill the empty vertical spaces.
• Picture is not distorted from original size.
Sports
Picture Settings
Noise Reduction
Game Mode
Theater Settings
4:3 HD picture size example
3
In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
4
5
Press b to highlight the Picture Scroll field.
Native picture size (for 720p, 1080i, and 1080p signal
programs)
40
Press C or c to scroll the picture up and down as needed,
from –10 to +20.
Theater Settings
Mode: Sports
Picture Size
TheaterWide 2
Picture Scroll
• If receiving a 720p, 1080i, or 1080p signal program, Native
mode scales the video to display the entire picture within the
borders of the screen (i.e. no overscanning).
• This is especially useful for external HD sources such as
HD-DVD, DVHS movies, or PC graphics.
Off
-5
Cinema Mode
Film
Auto Aspect Ratio
Reset
6
On
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Chapter 6: Using the TV’s features
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV will
automatically select the picture size when one of the following
input sources is received:
• A 480i signal from the VIDEO 1, VIDEO 2, ColorStream
HD-1, or ColorStream HD-2 input.
• A 480i, 480p, 720p, 1080i, 1080p, or VGA signal from the
HDMI input.
Aspect ratio of Automatic aspect size (automatically
signal source selected when Auto Aspect is On)
4:3 normal
Natural (with sidebars)
4:3 letter box
TheaterWide 2
16:9 full
Full
Not defined
(no ID-1 data
or HDMI
aspect data)
To set the Cinema Mode to Film:
1
2
3
Press Y and open the Video menu.
Highlight Theater Settings and press T.
In the Cinema Mode field, select Film.
Mode: Sports
Picture Size
The current picture size you set under
“Selecting the picture size” on page 39.
Natural
Picture Scroll
--
Cinema Mode
Film
Auto Aspect Ratio
To turn on the auto aspect ratio feature:
Reset
4
On
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Press Y and open the Video menu.
To set the Cinema Mode to Video:
Highlight Theater Settings and press T.
Select Video in step 3 above.
In the Auto Aspect Ratio field, select On.
Theater Settings
Mode: Sports
Picture Size
Natural
Picture Scroll
--
Cinema Mode
Film
Auto Aspect Ratio
On
Reset
4
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the VIDEO 1, VIDEO 2, ColorStream
HD-1, ColorStream HD-2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.
Theater Settings
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
1
2
3
Selecting the cinema mode
(480i and 1080i signals)
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
41
Chapter 6: Using the TV’s features
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from four different
modes, as described below.
Adjusting the picture quality
You can adjust the picture quality (Contrast, Back Light,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
Selection
Pressing C
Pressing c
Contrast
lower
higher
Mode
Picture Quality
Back Light*
darker
lighter
Sports
Bright and dynamic picture (factory setting)
DynaLight**
On/Off
On/Off
Standard
Standard picture settings (factory setting)
Brightness
darker
lighter
Movie
Lower contrast for darkened room (factory
setting)
Color
paler
deeper
Tint
reddish
greenish
Preference
Your personal preferences
Sharpness
softer
sharper
To select the picture mode:
Press u on the remote control.
The following popup menu appears on-screen.
Sports
Standard
Movie
Preference
Press B or b to select the picture mode you prefer and
press T.
To select the picture mode using the menu system:
1
2
* Back Light
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
**DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
To adjust the picture quality:
1
2
3
Press Y and open the Video menu.
Highlight Mode and press T.
Press Y and open the Video menu.
Highlight Picture Settings and press T.
Press B or b to select the picture quality you want to
adjust (Contrast, Back Light, DynaLight,
Brightness, Color, Tint, or Sharpness), and then
press C or c to adjust the setting, as described in the table
above.
Mode: Sports
Picture Settings
Video
Mode
Picture Settings
Noise Reduction
3
100
Back Light
100
DynaLight
Sports
Off
Game Mode
Theater Settings
Contrast
On
Brightness
50
Color
50
Tint
0
Sharpness
50
Advanced Picture Settings
Picture Settings
Contrast
Sports
Standard
Movie
Preference
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
Done
Reset
Press B or b to select the picture mode you prefer and
press T.
4
Mode: Preference
70
To save the new settings, highlight Done and press T.
You can use any of the picture modes (- “Selecting the
picture mode,” above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight Reset and press T.
The picture qualities you adjusted are automatically saved in
the Preference mode (- “Selecting the picture mode,”
above left) until Reset is selected.
42
Chapter 6: Using the TV’s features
Using the closed caption mode
Base closed captions
The closed caption mode has two options:
• Captions—An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are closed
captioned (usually marked “CC” in program guides).
• Text—An on-screen display of information not related to
the current program, such as weather or stock data (when
provided by individual stations).
To view captions or text:
1
2
3
Press Y and open the Preferences menu.
Highlight Base CC Mode and press c.
Press B or b to select the desired closed caption mode and
press T.
Note: A closed caption signal may not display in the following
situations:
• When a videotape has been dubbed
• When the signal reception is weak
• When the signal reception is non-standard
Digital CC Settings
You can customize the closed caption display characteristics
by changing the background color, opacity, text size, type,
edge, and color.
Note:
• This feature is available for digital channels only.
• You cannot set the Caption Text and Background as the
same color.
To customize the closed captions:
1
2
3
Preferences
CC Selector
Base CC Mode
Off
Press Y and open the Preferences menu.
Highlight Digital CC Settings and press T.
Press B or b to highlight the characteristic you want to
change, and then press C or c to select the format for that
characteristic (see table below).
Off
Digital CC Settings
Digital CC Settings
CC1
Input Labeling
CC2
Caption Size
Auto
Channel Labeling
CC3
Caption Text Type
Auto
Caption Text Edge
Auto
Caption Text Color
Auto
T3
Text Foreground Opacity
Auto
T4
Background Color
Auto
Text Background Opacity
Auto
English
Menu Language
Channel Browser Setup
CC4
T1
T2
• To view captions:
Caption Text Edge Color
Highlight CC1, CC2, CC3, or CC4. (CC1 displays
translation of the primary language in your area.)
Reset
4
Giant pandas eat leaves.
Note: If the program or video you selected is not closed
captioned, no captions will display on-screen.
• To view text:
Highlight T1, T2, T3, or T4.
WORLD WEATHER
LONDON
MOSCOW
PARIS
ROME
TOKYO
Temps
F
C
51
11
57
14
53
12
66
19
65
18
Current
Weather
Clear
Cloudy
Clear
Cloudy
Rain
Note: If text is not available in your area, a black rectangle
may appear on screen. If this happens, set the Base CC
Mode to Off.
• To turn off the closed caption mode:
Select Off in step 3 above.
Auto
ABC123
Preview
window
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Caption Size
Auto, Small, Standard, Large
Caption Text
Type
Auto, Default, Mono w. Serif, Prop. w.
Serif, Mono w/o Serif, Prop. w/o Serif,
Casual, Cursive, Small Capitals
Caption Text
Edge
Auto, None, Raised, Depressed, Uniform,
Left Drop Shadow, Right Drop shadow
Caption Text
Color
Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan
Text Foreground Auto, Transparent, Translucent
Opacity
Flashing, Solid
Background
Color
Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan
Text Background Auto, Transparent, Translucent
Opacity
Flashing, Solid
Caption Text
Edge Color
Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan
43
Chapter 6: Using the TV’s features
CC Selector
You can use the CC Selector to temporarily override the
default analog caption mode (set in Base CC Mode) for a
particular channel. However, once you change to another
analog channel, the closed caption setting will automatically
change back to the current Base CC Mode setting.
You can also use the CC Selector to select digital closed
caption services (if available). When such services are not
available, the CC Selector presents a default list of services.
If the selected service is not available, the next best service will
be used instead.
To select closed captions:
1
2
Press Y and open the Preferences menu.
Highlight CC Selector and press T.
Adjusting the audio
Muting the sound
Press W to partially reduce (1/2 MUTE) or turn off (MUTE)
the sound. Each time you press W, the mute mode will change
in the following order:
1/2 Mute
Mute
Volume
If the closed caption mode is set to Off when you select
“MUTE” mode, the closed caption feature is automatically
activated. To mute the audio without automatically activating
the closed caption feature, use Z to set the volume to 0. See
“Using the closed caption mode” (- page 43) for more
information on closed caption modes.
Using the digital audio selector
Preferences
CC Selector
Base CC Mode
Off
Off
CC1
Digital CC Settings
Input Labeling
CC2
Channel Labeling
CC3
Menu Language
Channel Browser Setup
English
CC4
T1
T2
3
4
Press B or b to select Closed Caption, and then press
C or c to select the desired service.
Closed Caption
CC 1
Audio
None
You can use the Digital Audio Selector to conveniently
switch between audio tracks on a digital channel (for those
channels that have multiple audio tracks). This temporarily
overrides the audio track chosen by the language option under
Audio Setup (- “Selecting stereo/SAP broadcasts” on
page 45).
To use the digital audio selector:
1
2
Press Y and open the Audio menu.
Highlight Digital Audio Selector and press T.
Press O.
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
3
4
44
Press B or b to select Audio, and then press C or c to
select the desired service.
Press O.
Closed Caption
CC 1
Audio
None
Chapter 6: Using the TV’s features
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” appears on-screen when E is pressed.
The MTS feature is not available when the TV is in VIDEO
mode.
To listen to stereo sound:
1
2
Press Y and open the Audio menu.
Highlight Audio Setup and press T.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
To adjust the audio quality:
Audio Setup
3
In the MTS field, select Stereo.
Audio Setup
PC Audio
No
HDMI 1 Audio
Auto
MTS
Stereo
Language
English
Optical Output Format
Dolby Digital
Dynamic Range Control
Reset
4
1
2
3
Press Y and open the Audio menu.
Highlight Audio Settings and press T.
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
Audio Settings
Dolby Digital
Compressed
Bass
100
Treble
100
Balance
0
StableSound
Done
Off
Reset
To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Note:
• You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to an alternate language on an ATSC digital
station (if available):
4
Done
Press C or c to adjust the level.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5
To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Highlight the Language field in step 3 above, and then press
C or c to select the language you prefer.
45
Chapter 6: Using the TV’s features
Using the StableSound® feature
3
The StableSound® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
Audio Setup
PC Audio
In the StableSound field, select On.
100
Treble
100
Balance
0
StableSound
On
Reset
4
Stereo
Language
English
Optical Output Format
Dolby Digital
Dolby Digital
Dynamic Range Control
Compressed
Reset
4
Audio Settings
Bass
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . .
Treble . . . . . . .
Balance . . . . . .
StableSound . .
center (50)
center (50)
center (0)
Off
Auto
MTS
Press Y and open the Audio menu.
Highlight Audio Settings and press T.
No
HDMI 1 Audio
To turn on the StableSound® feature:
1
2
3
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Using the Dolby® Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
ATSC to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1
2
3
To turn off the StableSound feature:
Press Y and open the Audio menu.
Highlight Audio Setup and press T.
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected, the
audio is output with minimal compression.
Audio Setup
Select Off in step 3 above.
PC Audio
No
HDMI 1 Audio
Auto
Selecting the optical audio output format
MTS
Stereo
Language
English
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on
the TV (see “Connecting a digital audio system” on page 18).
Optical Output Format
Dolby Digital
Dolby Digital
Dynamic Range Control
Compressed
To select the optical audio output format:
1
2
Press Y and open the Audio menu.
Highlight Audio Setup and press T.
46
Reset
4
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• This item will be grayed out for NTSC signals, Video,
ColorStream, and PC inputs.
• The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
Chapter 6: Using the TV’s features
When the correct PIN code is entered, the Locks menu opens.
Using the Locks menu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Front (control)
Panel Lock, and New PIN Code features. You can use these
features after entering the correct PIN code.
Locks
Enable Rating Blocking
On
Input Lock
Off
Front Panel Lock
Off
New PIN Code
Press Y and highlight the Locks menu icon.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press E
four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
Locks
Enable Rating Blocking
Off
Channels Block
Entering the PIN code
1
Off
Edit Rating Limits
Off
Edit Rating Limits
Channels Block
Input Lock
Off
Front Panel Lock
Off
Changing your PIN code
New PIN Code
2
Press b, which displays the PIN code entry screen.
• The Lock System screen (below) appears if a PIN
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press T.
1
2
3
4
Lock System
Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T.
Press b to highlight New PIN Code and press T.
Locks
Enable Rating Blocking
Please enter a 4 digit PIN code
Off
Edit Rating Limits
Off
On
Channels Block
Confirm PIN code
Input Lock
Off
Front Panel Lock
Off
New PIN Code
Cancel
Done
• The Locks/Active screen (below) appears if the PIN
code is already stored. Use the Number buttons to enter
your four-digit code and press T.
5
Press the Number buttons to enter a new four-digit code.
Reenter the PIN code to confirm it.
6
Press T. The new PIN code is now active.
New PIN Code
Locks
Active
Please enter a 4 digit PIN code
Please enter the 4 digit PIN code
* * * *
* * * *
Confirm PIN code
* * * *
Cancel
Done
If the wrong PIN code is entered, the message “Incorrect PIN
code, please try again!” appears. Highlight Retry and press
T. Enter the code again and press T.
Cancel
Done
47
Chapter 6: Using the TV’s features
Blocking TV programs and movies
by rating (V-Chip)
Downloading an additional rating system
for blocking TV programs and movies
Some TV programs and movies include signals that classify
the content of the program (violence, sex, dialog, language).
The V-Chip feature in this TV detects the signals and blocks
the programs according to the ratings you select. (For rating
descriptions, see the tables on the next page.)
In the future, an additional rating system may become
available for use in selectively blocking programs.
Note: Rating blocking is a function of the V-Chip feature in this
TV, which supports the U.S. V-Chip system only.
To download the additional rating system
(if available):
To block and unblock TV programs and movies:
1
2
3
4
5
6
Press Y and highlight the Locks menu icon.
7
Highlight Alt RS and press T. The Edit Alternate
Ratings screen will appear.
1
2
3
4
5
Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T.
Press b to highlight Enable Rating Blocking.
Press c and b to select On, and then press T.
Note: The currently tuned station must be receiving a digital
signal before an additional rating system can be downloaded.
Locks
Enable Rating Blocking
Off
Off
Edit Rating Limits
Off
Front Panel Lock
Off
Enter your four-digit PIN code and press T.
Press b to highlight Enable Rating Blocking.
Press c and b to select On, and press T.
Press b to highlight Edit Rating Limits and press T.
The Edit Rating Limits screen appears.
Note:
• The Alt RS button will only be available if an additional
rating system is currently available.
• It may take several minutes for the TV to download the
additional rating system.
• The information displayed in the Alternate Ratings
screen will depend on the configuration of the
additional rating system available at the time of
download.
On
Channels Block
Input Lock
Press b to display the PIN code entering screen.
New PIN Code
6
Press b to highlight Edit Rating Limits and press T.
The Edit Rating Limits screen (below) appears.
7
Press BbC c and then press T to select the level of
blocking you prefer. A box with an “5” is a rating that will
be blocked. As you highlight a rating, a definition for the
rating appears at the bottom of the screen.
8
When done selecting the ratings you want to block,
highlight Done and press T.
Press B b C c and then press T to select the level of
blocking you prefer. A box with an “5” is a rating that will
be blocked.
9
When you are finished selecting the ratings you want to
block, highlight Done and press T.
8
Edit Rating Limits
TV (V-CHIP) FV D L
TV-Y
V
Movies
G
Children
TV-Y7
PG
TV-G
PG-13
TV-PG
R
TV-14
NC-17
Alt RS
TV-MA
X
Cancel
"None" Rated
48
S
Youth
Done
10 In the Edit Rating Limits screen, highlight Done and
press T.
Note:
• The additional rating system can only be downloaded one
time. You will not be able to download any updates to the
rating system should such updates become available.
• The additional rating system is not designed, transmitted, or
controlled by the TV or Toshiba, nor is the availability of an
additional rating system determined or controlled by
Toshiba. Similarly, the rating of programs in an additional
rating system is not determined, transmitted, or controlled
by the TV or Toshiba.
• The additional rating system is an evolving technology;
therefore, availability, content, and format may vary.
Chapter 6: Using the TV’s features
Independent rating system for broadcasters
Ratings
Description and Content themes
TV-MA
TV-14
Mature Audience Only (This program is specifically
designed to be viewed by adults and therefore may
be unsuitable for children under 17.)
L) Crude or indecent language S) Explicit sexual
activity V) Graphic violence
Parents Strongly Cautioned (This program contains
some material that many parents would find
unsuitable for children under 14 years of age.)
D) Intensely suggestive dialog L) Strong, coarse
language S) Intense sexual situations V) Intense
violence
TV-PG
Parental Guidance Suggested (This program
contains material parents may find unsuitable for
younger children.)
D) Some suggestive dialog L) Infrequent coarse
language S) Some sexual situations V) Moderate
Blocking channels
With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.
To block channels:
1
2
3
Press Y and highlight the Locks menu icon.
4
Press b to highlight Channels Block and then press T.
A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T
(- page 47).
violence
TV-G
General Audience (Most parents would find this
program suitable for all ages.)
TV-Y7,
TV-Y7FV
Directed to Older Children (This program is designed
for children age 7 and above. Note: Programs in
which fantasy violence may be more intense or more
combative than other programs in this category are
designated TV-Y7FV.)
All Children (This program is designed to be
appropriate for all children.)
TV-Y
Locks
Enable Rating Blocking
Off
Edit Rating Limits
Off
On
Channels Block
Input Lock
Off
Front Panel Lock
Off
New PIN Code
5
Independent rating system for movies
Ratings
Description and Content themes
X-rated (For adults only)
X
Not intended for anyone 17 and under
NC-17
Press Bb to highlight the channel you want to block and
press T, which puts an “5” in the box next to that
channel.
Channels Block
1
2
3
4
R
Restricted (Under 17 requires accompanying parent
or adult)
PG-13
Parents Strongly Cautioned (Some material may be
inappropriate for children under 13)
7
Allow All
8
Block All
Parental Guidance Suggested (Some material may
not be suitable for children)
9
Cancel
PG
10
Done
G
General Audience (Appropriate for all ages)
Note:
• If you place an “5” in the box next to “ ‘None’ Rated,”
programs rated “None” will be blocked; however, programs
that do not provide any rating information will not be
blocked.
• To display the rating of the program you are watching, press
E on the remote control. If it is rated “None,” the word
“NONE” appears in the RECALL screen (as shown below
right). If rating information is not provided, no rating will
appear in the RECALL screen.
TV - PG L V
5
6
6
7
Repeat step 5 for other channels you want to block.
Highlight Done and press T.
To unblock individual channels:
In step 5 above, press Bb to highlight the channel you want to
unblock, press T to remove the “5” from the box, highlight
Done and press T.
NONE
(continued)
49
Chapter 6: Using the TV’s features
Using the input lock feature
To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press T.
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Done and press T.
You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream
HD-2, HDMI 1, HDMI 2, HDMI 3 and PC) and channels 3 and
4. You will not be able to view the input sources or channels
until you unlock the inputs.
To lock/unlock the video inputs:
Channels Block
1
2
3
4
5
6
7
Allow All
8
Block All
9
Cancel
10
Done
1
2
3
4
5
Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
This program exceeds the rating limit you set.
Push 'mute' to enter PIN.
You can either temporarily unlock the program or select an
unlocked program to watch.
Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T.
Press b to highlight Input Lock and press c.
Press B or b to select the level of video input locking you
prefer, as described below.
Video: Locks VIDEO 1, VIDEO 2, ColorStream HD1/
HD2, HDMI 1, HDMI 2, HDMI 3, and PC.
Video+: Locks VIDEO 1, VIDEO 2, ColorStream HD1/
HD2, HDMI 1, HDMI 2, HDMI 3, PC and channels 3 and
4.
• Select Video+ if you play video tapes via an ANT
input.
Locks
Enable Rating Blocking
Off
Edit Rating Limits
Channels Block
To temporarily unlock the program:
1
2
Press W.
Off
Off
Front Panel Lock
Off
Video
New PIN Code
Enter your four-digit PIN code and press T. If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Locks
Active
Enter PIN code to temporarily unblock.
* * * *
Cancel
50
Input Lock
Done
Video +
Off: Unlocks all video inputs and channels 3 and 4.
6
Press T.
Chapter 6: Using the TV’s features
Using the control panel lock feature
You can lock the control panel to prevent your settings from
being changed accidentally (by children, for example). When
the control panel lock is On, none of the controls on the TV
control panel will operate except POWER.
To lock the control panel:
1
2
3
4
5
Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Using the PC settings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut off, readjust the Horizontal
Position and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.
Enter your four-digit PIN code and press T.
To adjust the PC settings:
Press b to highlight Front Panel Lock.
1
Repeatedly press + to select PC input mode
(- “Selecting the video input source to view” page 35).
2
3
Press Y and open the Setup menu.
Press c and C or c to highlight On and press T. When
the control panel is locked and any button on the control
panel (except POWER) is pressed, the message “Not
Available” appears.
Locks
Enable Rating Blocking
Highlight PC Settings and press T.
Setup
Off
Installation
Edit Rating Limits
Sleep Timer
Channels Block
PC Settings
Input Lock
Off
Front Panel Lock
Off
New PIN Code
Power-On Mode
Power-Saving
Off
On
To unlock the control panel:
Highlight Off in step 5 above, or press and hold the
VOLUME – button on the TV control panel for about 10
seconds until the volume icon appears.
Note: If a PC is not connected or there is no pc input
signal, this feature will be grayed out in the Setup menu.
4
5
Press B or b to highlight the item you want to adjust.
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position
0
Vertical Position
0
Clock Phase
0
Sampling Clock
Reset
0
Done
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
• Horizontal Position:
Moves the picture left/right.
The adjustment range is within ±10 from center.*
• Vertical Position:
Moves the picture up/down.
The adjustment range is within ±10 from center.*
• Clock Phase:
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±4 from center.*
• Sampling Clock:
Helps to reduce noise and minimize periodic vertical stripes
on the screen.
The adjustment range is within ±5 from center.*
* The default settings may vary depending on the input signal format.
51
Chapter 6: Using the TV’s features
Setting the PC Audio
Setting the sleep timer
This function allows you to output the sound from your PC (if
connected) or mute the sound from your PC and output the
sound from your HDMI (DVI) connection. (- page 19)
You can set the sleep timer to turn off the TV after a set length
of time (maximum of 180 minutes).
To set the sleep timer using the remote control:
To set the PC Audio:
1
2
3
Press Y and open the Audio menu.
Highlight Audio Setup and press T.
Press B or b to select PC Audio and then press C or c
to select No or Yes.
Yes: Outputs the sound from your PC.
No: Mutes the sound from your PC, and outputs the
sound from the HDMI-1 connection.
Press [ on the remote control to set the length of time until
the TV turns off. Repeatedly press [ to increase the time in
10-minute increments, or press B or b to increase or decrease
the time in 10-minute increments, to a maximum of 180
minutes.
To set the sleep timer using the on-screen menus:
1
2
Press Y and open the Setup menu.
Highlight Sleep Timer and press T.
Audio Setup
PC Audio
No
HDMI 1 Audio
Auto
MTS
Stereo
Language
English
Optical Output Format
Dolby Digital
Dolby Digital
Dynamic Range Control
Compressed
Reset
Done
Note: Because the PC and HDMI-1 inputs share the same
set of analog audio inputs, the PC Audio menu setting
influences the HDMI 1 Audio menu setting. If PC Audio is
set to “No,” the HDMI 1 Audio setting changes to “Auto.”
If PC Audio is set to “Yes,” the HDMI 1 Audio setting is
set to “Digital” and is grayed out in the menu. (Also see
item 4 on page 11 and “Setting the HDMI™ Audio mode”
on page 32.)
Setup
Installation
Sleep Timer
PC Settings
Power-On Mode
3
Power-Saving
Press the Number buttons to enter the length of time in
10-minute increments.
Sleep Timer
Enter total minutes until the TV
turns off automatically (Maximum
180 minutes)
1 2 0
Cancel
4
Done
Highlight Done and press T.
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep time:
Press [.
Sleep Timer
120 minutes
Note: A message will display on-screen when there is one
minute remaining on the sleep timer.
To cancel the sleep timer:
Repeatedly press [ until it is set to 0 minute.
52
Chapter 6: Using the TV’s features
Displaying TV status information
Understanding the auto power off
feature
To display TV status information using RECALL:
Press E on the remote control.
The following information will display (if applicable):
• Current input (ANT, VIDEO 1, etc.)
• If ANT is the current input, either “CABLE” (for cable TV)
or “ANT” (for over-the-air broadcasts).
• Channel number (if in ANT mode)
• Channel label (if set)
• Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signal only)
• Stereo, Mono or SAP audio status (when HDMI input mode,
Dolby Digital or PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status
ANT
123-456
Stereo SAP
1080i
16:9
The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the TV
when the power is resupplied.
Note: You should unplug the TV’s power cord if it is possible
that you will be away from the TV for an extended period of time
after the power is restored.
TV-PG L V
9:00pm .
ABCHD
To close the RECALL screen:
Press E again.
To display TV status information using INFO:
Press Q on the remote control.
The following additional information will display for off air
digital channels (if applicable):
• Title
• Duration
• Detailed description
ANT
123-456
ABCHD
Stereo SAP
,
MLB Young s XXX...
,
1080i
16:9
TV-PG L V
East 9:00pm - 11:00pm
Today s Major League Baseball.
Note: The location of the banner can be moved to the top or
bottom of the screen by pressing B or b while the RECALL or
INFO display is on-screen. (The last position will be stored to
memory.)
53
Chapter 7: Using the TV’s advanced features
Using the advanced picture settings
features
Using the static gamma feature
The static gamma feature allows you to adjust the levels of
black in the picture.
To adjust the static gamma settings:
Using dynamic contrast
When dynamic contrast is set to Low, Middle, or High, the
TV will detect changes in the picture quality that affect the
appearance of your contrast settings and then automatically
adjust the video.
1
2
Press Y and open the Video menu.
Highlight Picture Settings and press T.
Video
To select dynamic contrast preferences:
Mode
1
2
Game Mode
Theater Settings
Sports
Picture Settings
Noise Reduction
Press Y and open the Video menu.
Highlight Picture Settings and press T.
3
Off
Highlight Advanced Picture Settings and press T.
Picture Settings
Video
Mode
Sports
Picture Settings
100
Back Light
100
DynaLight
Noise Reduction
Off
Game Mode
Theater Settings
3
On
Brightness
50
Color
50
Tint
0
Sharpness
50
Advanced Picture Settings
Highlight Advanced Picture Settings and press T.
Contrast
100
Back Light
100
DynaLight
4
On
Brightness
50
Color
50
Tint
0
Sharpness
50
Dynamic Contrast
Static Gamma
Reset
In the Dynamic Contrast field, select either Off, Low,
Middle or High.
Dynamic Contrast
Static Gamma
Reset
Off
Cool
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the
dynamic contrast setting, the picture mode automatically
changes to Preference.
54
Cool
Done
of black colors will be decreased.
• If the setting is moved in the plus direction, the detail of
black colors will be increased.
Mode: Preference
0
Color Temperature
High
• If the setting is moved in the minus direction, the detail
\
Advanced Picture Settings
Mode: Preference
0
Color Temperature
Done
Reset
In the Static Gamma field, press C or c to adjust the
static gamma.
The adjustment range is within ±5 from center.
Advanced Picture Settings
Advanced Picture Settings
5
Done
Reset
Mode: Sports
Picture Settings
4
Mode: Sports
Contrast
5
To save the new settings, highlight Done and press T.
To revert the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.
Chapter 7: Using the TV’s advanced features
Selecting the color temperature
Using CableClear® digital noise reduction
You can change the quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm), as
described below.
The CableClear® digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
Mode
Picture Quality
Cool
blueish
Medium
neutral
Warm
reddish
To change the CableClear settings:
To select the color temperature:
1
2
3
4
1
2
Press Y and open the Video menu.
Highlight Noise Reduction and press T.
Press Y and open the Video menu.
Video
Highlight Picture Settings and press T.
Mode
Highlight Advanced Picture Settings and press T.
Noise Reduction
Game Mode
Theater Settings
Highlight Color Temperature and press T.
Advanced Picture Settings
Dynamic Contrast
Static Gamma
Mode: Preference
High
Sports
Picture Settings
3
In the CableClear field, select your desired setting.
0
Noise Reduction
Cool
Color Temperature
Reset
CableClear
Done
In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
Color Temperature
B Drive
Cool
0
Done
Reset
Press B or b to select either B Drive or G Drive, and
then press C or c to adjust the settings.
B Drive
1
G Drive
1
• B Drive: c makes the picture blueish.
• G Drive: c makes the picture greenish.
Note: The B Drive and G Drive settings are connected to
the Color Temperature settings and will change based
on which setting is selected in step 5 above.
7
Low
Done
Note:
• If the current input is ANT, VIDEO 1, or VIDEO 2, the
menu will display the text “CableClear.” The available
selections are Off, Auto, Low, Middle, and High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2, or HDMI 3 the menu will display
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
0
G Drive
6
Reset
Mode: Preference
Color Temperature
ANT
Auto
MPEG Noise Reduction
5
Off
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference.
55
Chapter 7: Using the TV’s advanced features
Using MPEG noise reduction
Using the Game Mode feature
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
(“grayed out”).
You can use the Game Mode feature for shorter frame delays
when playing a video game requiring split-second timing
between the on-screen display and input from the controller
(such as music creation and high-action games).
This feature is more effective for 480i and 1080i input signals.
To select the MPEG noise reduction level:
Note: To use the Game Mode feature, the current video input
must be Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, or HDMI 3. The Game
Mode cannot be turned on when any other video input is
selected.
1
2
3
Press Y and open the Video menu.
Highlight Noise Reduction and press T.
Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
Noise Reduction
CableClear
Auto
MPEG Noise Reduction
Low
Reset
4
ANT
To turn on Game Mode:
1
2
Press Y and open the Video menu.
Press B or b to highlight the Game Mode field, and then
press C or c to select On.
Done
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Video
Mode
Sports
Picture Settings
Noise Reduction
Game Mode
Theater Settings
Off
Off
On
To turn off Game Mode:
Select Off in step 2 above, change the video input, or turn the
TV off and then on again.
Note: You can change the video input by pressing + on the
remote control (- page 35).
56
Chapter 7: Using the TV’s advanced features
Using the advanced audio settings
features
Using the SRS WOW™ surround sound
feature
SRS WOW™ is a special combination of SRS Labs audio
technologies (SRS 3D, SRS Focus, and SRS TruBass) that
creates a thrilling surround sound experience with deep, rich
bass from stereo sound sources. Your TV’s audio will sound
fuller, richer, and wider.
To adjust the WOW™ settings:
1
Put the TV in STEREO mode (- “Selecting stereo/SAP
broadcasts” on page 45).
2
3
4
Press Y and open the Audio menu.
Highlight Advanced Audio Settings and press T.
Press b or B to highlight the WOW feature you want to
adjust, and then press C or c to adjust the item.
Advanced Audio Settings
WOW: SRS 3D
Off
WOW: SRS Focus
Off
WOW: SRS TruBass
Low
Reset
Done
• WOW: SRS 3D — To turn the surround sound effect
On or Off.
Note: If the broadcast is monaural, the SRS 3D effect
will not work.
• WOW: SRS Focus — To turn the vocal emphasis effect
On or Off.
• WOW: SRS TruBass — To select the desired bass
expansion level (Off, Low, or High).
5
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
WOW, SRS and l symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
57
Chapter 8: Troubleshooting
General troubleshooting
Before calling a service technician, please check this chapter
for a possible cause of the problem and some solutions you can
try.
Black box on-screen
• The closed caption feature is set to one of the Text modes
(T1, T2, T3, or T4). Set the closed caption feature to Off
(- page 43).
TV stops responding to controls
• If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
Other problems
• If your TV’s problem is not addressed in this
Troubleshooting section or the recommended solution
has not worked, use the Restore Factory Defaults
procedure (- page 33).
TV will not turn on
• Make sure the power cord is plugged in, and then press
p.
• The remote control batteries may be dead. Replace the
batteries or try the control panel buttons.
Picture problems
General picture problems
• Check the antenna/cable connections (- Chapter 2).
• Press + on the remote control or TV and select a valid
video input source (- page 35). If no device is
connected to a particular input on the TV, no picture will
display when you select that particular input source. For
device connection details, see Chapter 2.
• Antenna reception may be poor. Use a highly directional
outdoor antenna (if applicable).
• The station may have broadcast difficulties. Try another
channel.
• Adjust the picture qualities (- page 42).
• If you are using a VCR, make sure l on the remote
control is set correctly (- page 22).
• Do not connect both a standard video cable and an
S-video cable to the VIDEO 1 input at the same time
(- page 14).
Noisy picture
• If you are watching an analog channel (off-air broadcast
or Cable TV), you can set the CableClear®/DNR
feature to AUTO to reduce visible interference in the TV
picture (- page 55).
Video Input Selection problems
• If the Input Selection window does not appear when
you press + on the remote control or TV, press + a
second time, which will change to the next video input
source and display the Input Selection window.
58
Cannot view external signals or channel 3 or 4
• If you cannot view signals from external devices
connected to VIDEO 1, VIDEO 2, ColorStream®
HDMI 1, HDMI 2, HDMI 3, PC, or from channels 3 or 4,
make sure the Input Lock is set to Off (- page 50).
Poor color or no color
• The station may have broadcast difficulties. Try another
channel.
• Adjust the Tint and/or Color (- page 42).
Poor composite or S-video picture
• If the TV is connected to an external A/V device (e.g.,
DVD player, video game system, set-top box, etc.) try
using a ColorStream or HDMI video connection
instead.
Picture and sound are out of sync
• As with all products that contain a digital display, in rare
instances, when viewing certain content (e.g.. television
broadcasts, video games, DVDs), you may notice that the
sound and picture are slightly out of sync. This
phenomenon can be caused by various factors including,
without limitation, video processing within the TV, video
processing in an attached gaming system, and video
processing or different compression rates used by
broadcasters in their programming. You may want to try
one or more of the following suggestions, which may
help to reduce the effect of this phenomenon:
– If the TV is connected to an A/V receiver that has a
programmable audio delay feature, use this feature to
help synchronize the sound to the picture.
– If you notice this phenomenon only on certain TV
channels, please contact your local broadcast, cable, or
satellite provider to inform them of this issue.
LED indications while in reboot from standby
• When you plug the power cord in, the yellow LED will
blink until the TV enters standby mode, (plugged in but
not powered on). This is normal and is not a sign of
malfunction.
Sound problems
• Check the antenna/cable connections (- Chapter 2).
• The station may have broadcast difficulties. Try another
channel.
• The sound may be muted. Press VOLUME.
• If you hear no sound, try setting the MTS feature to
Stereo mode (- page 45).
• If you are not receiving a second audio program from a
known SAP source, make sure the MTS feature is set to
SAP mode (- page 45).
• If you hear audio that seems “incorrect” for the program
you are watching (such as music or a foreign language),
the SAP mode may be on. Set the MTS feature to Stereo
mode (- page 45).
Remote control problems
• Make sure the remote control is set to the correct device
mode (- page 21).
• Remove all obstructions between the remote control and
the TV.
• The remote control batteries may be dead. Replace the
batteries (- page 20).
Chapter 8: Troubleshooting
• Your TV remote control may not operate certain features
on your external device. Refer to the owner’s manual for
your other device to determine its available features. If
your TV remote control does not operate a specific
feature on another device, use the remote control that
came with the device (- pages 22–26).
• If the TV still does not act as expected, use the Reset
Factory Defaults procedure (- page 33).
Channel tuning problems
• Make sure the remote control is set to the correct device
mode (- page 21).
• The channel may have been erased from the channel
memory by the Channel Add/Delete feature. Add the
channel to the channel memory (- page 30).
• The channel may be blocked by the Channels Block
feature. Unblock the channel (- page 49).
• If you are unable to tune digital channels, check the
antenna configuration (- page 29). If you are still
unable to tune digital channels, clear all channels from
the channel list (- page 31) and reprogram channels
into the channel memory (- page 30). If you are still
unable to tune digital channels, use the Reset Factory
Defaults procedure (- page 33). Also see “TV stops
responding to controls” and “Other problems”
(- page 58).
Closed caption problems
• If the program or video you selected is not closedcaptioned, no captions will display (- page 43).
• If text is not available, a black rectangle may appear.
If this happens, turn off the closed caption feature (page 43).
• A closed-caption signal may not display correctly in the
following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard (- page 43).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN code entering
screen is displayed, press E four times within 5
seconds. The PIN code you previously stored will be
cleared (- page 47).
• The V-Chip feature is available for the U.S. V-Chip
system only (- page 48).
59
Chapter 8: Troubleshooting
LED indications
The green and yellow LED lights on the TV front indicate the TV’s status, as described below.
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
TV front
POWER
Yellow LED
LED Indication
Green LED
Condition
Solution
1) Green is ON (solid).
The TV is operating properly.
–
2) Yellow is ON (solid).
Standby with Power-On Mode set to Fast.
See “Selecting the Power-On Mode”
(- page 34).
3) Yellow blinks three
times.
TV is powering up.
Wait several seconds until the yellow LED stops
blinking.
4) Green blinks slowly.
Abnormal operation of BUS line.
5) Green blinks
quickly.
Power protect detection.
Turn OFF the TV and unplug the power cord.
Plug the power cord in again and turn ON the TV.
If, after trying the solutions, the problem still exists:
• In the U.S., call TACP Consumer Solutions at 1-800-575-5469.
• In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
“Home Entertainment,” and then click “Support.”
60
Chapter 9: Appendix
Specifications
Note:
• This model complies with the specifications listed
below.
• Designs and specifications are subject to change
without notice.
• This model may not be compatible with features and/or
specifications that may be added in the future.
Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear,
unencrypted)
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Power Source: 120 V AC, 60 Hz
Power Consumption
26HL67: 74 W (average)
0.5 W in standby mode
32HL67/32HL67U:
101 W (average)
0.5 W in standby mode
37HL67: 116 W (average)
0.5 W in standby mode
42HL67: 161 W (average)
0.6 W in standby mode
Audio Power: 10 W + 10 W
Speaker Type: Two 2-3/8 × 4-3/4 inches (6 × 12 cm)
Video/Audio Terminals
S-VIDEO INPUT:
Y: 1 V(p-p), 75 ohm, negative sync.
C: 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k
ohm or greater)
ColorStream® (component video) HD INPUT:
VIDEO:Y: 1V(p-p), 75 ohm
PR: 0.7 V(p-p), 75 ohm
PB: 0.7 V(p-p), 75 ohm
Suggested formats: 1080i, 720p, 480p, 480i
AUDIO: 150 mV(rms), 22 k ohm or greater
HDMI™ INPUT:
HDMI compliant (type A connector)
HDCP compliant
Audio Lip Sync supported
Suggested formats: See table below.
HDMI Audio: 2-channel Linear-PCM; 32/44.1/48 kHz
sampling frequency; 16/20/24 bits per sample
FIXED AUDIO OUTPUT:
150 mv (rms) (30% modulation equivalent, 2.2 k ohm
or less)
DIGITAL AUDIO OUTPUT:
Optical type
PC INPUT:
15-Pin D-sub Analog RGB
Dimensions
26HL67:
Width: 26-1/4 inches (666 mm)
Height: 20-1/4 inches (514 mm)
Depth: 9-1/2 inches (241 mm)
32HL67/32HL67U:
Width: 31-1/2 inches (800 mm)
Height: 23-3/8 inches (592 mm)
Depth: 11-1/4 inches (285 mm)
37HL67: Width: 36-1/4 inches (920 mm)
Height: 26-1/8 inches (661 mm)
Depth: 11-1/4 inches (285 mm)
42HL67: Width: 40-1/2 inches (1,027mm)
Height: 28-5/8 inches (724 mm)
Depth: 13-1/4 inches (335 mm)
Weight
26HL67: 28.7 lbs (13.0 kg)
32HL67: 38.6 lbs (17.5 kg)
32HL67U: 38.6 lbs (17.5 kg)
37HL67: 46.3 lbs (21.0 kg)
42HL67: 59.5 lbs (27.0 kg)
Operating conditions
Temperature: 32ºF - 95ºF (0ºC - 35ºC)
Humidity: 20 - 80% (no moisture condensation)
Supplied Accessories
• Remote control with two size “AAA” batteries
• Owner’s manual (this book)
• Lead clip
Use this clip to attach the TV to a wall, pillar, or other
immovable structure. See item 20 on page 3.
HDMI input supports the following signal formats:
Format
VGA
480i
480p
720p
1080i
1080p
1080p
Resolution
640 x 480p
720 x 480i
720 x 480p
720 x 480p
1920 × 1080i
1920 × 1080p
1920 × 1080p
V. Frequency
59.940/60Hz
59.940/60Hz
59.940/60Hz
59.940/60Hz
59.940/60Hs
23.976/24Hz
59.940/60Hz
H. Frequency
31.469/31.500kHz
15.734/15.750kHz
31.469/31.500kHz
44.955/45.000kHz
33.716/33.750kHz
26.973/27.000kHz
67.433/67.500kHz
Pixel Clock Frequency
25.175/25.200MHz
27.000/27.027MHz
27.000/27.027MHz
74.176/74.250MHz
74.176/74.250MHz
74.176/74.250MHz
148.352/148.500MHz
61
Chapter 9: Appendix
Limited United States Warranty
for LCD Televisions 26” and Larger
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
following limited warranties to original consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
LCD TELEVISIONS PURCHASED IN THE U.S.A. AND USED
ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE
WARRANTIES.
LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF THE
U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO,
AND USED IN THE U.S.A., ARE NOT COVERED BY THESE
WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor
TACP warrants this LCD Television and its parts against defects in
materials or workmanship for a period of one (1) year after the date of
original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP’S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR
LABOR. During this period, TACP Authorized Service Station personnel
will come to your home when warranty service is required. Depending on
the type of repair required, the service will either be performed in your
home or the LCD Television will be taken to a TACP Authorized Service
Station for repair and returned to your home at no cost to you.
Rental Units
The warranty for LCD Television rental units begins on the date of the first
rental or thirty (30) days after the date of shipment to the rental firm,
whichever comes first.
Limited Warranty for Commercial Units
TACP warrants LCD Televisions that are sold and used for commercial
purposes as follows: all parts are warranted against defects in materials
or workmanship for a period of ninety (90) days after the date of original
retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP’S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART WITHOUT CHARGE TO YOU.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this LCD
Television.
Complete and mail the enclosed product registration card or register your
LCD Television online at www.tacp.toshiba.com/service as soon as
possible. By registering your LCD Television you will enable TACP to bring
you new products specifically designed to meet your needs and help us
to contact you in the unlikely event a safety notification is required under
the U.S. Consumer Product Safety Act. Failure to complete and
return the product registration card does not diminish your
warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must retain your original bill of sale or provide other proof of
purchase.
(2) All warranty servicing of this LCD Television must be performed by an
Authorized TACP Service Station.
(3) The warranties from TACP are effective only if this LCD Television is
purchased and operated in the Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems are
not covered by this warranty. Reception problems caused by
inadequate antenna systems, misaligned satellite dishes, cable
62
television distribution, VCRs, DVD players/recorders, personal
computer level IEEE-1394 devices, and any other connected signal
source device are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any LCD Television or parts that
have been lost or discarded by you or to damage to the LCD
Television or parts caused by fires, misuse, accident, Acts of God
(such as lightning or fluctuations in electric power), improper
installation, improper maintenance, or use in violation of instructions
furnished by TACP; use or malfunction through simultaneous use of
this LCD Television and connected equipment; or to units that have
been modified or had the serial number removed, altered, defaced,
or rendered illegible.
How to Obtain Warranty Service
If, after following all of the operating instructions in this manual and
reviewing the section entitled “Troubleshooting,” you find that service is
needed:
(1) To find the nearest TACP Authorized Service Station, visit TACP’s
website at www.tacp.toshiba.com/service or contact TACP’s
Consumer Solution Center toll free at 1-800-575-5469.
(2) You must present your original bill of sale or other proof of purchase
to the TACP Authorized Service Station.
For additional information, visit TACP’s website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE
U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED
WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY
WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A.
AS HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES,
AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST
PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR
ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR
INABILITY TO USE THIS LCD TELEVISION).
No person, agent, distributor, dealer, or company is authorized to change,
modify, or extend the terms of these warranties in any manner whatsoever.
The time within which an action must be commenced to enforce any
obligation of TACP arising under the warranty or under any statute or law
of the United States or any state thereof is hereby limited to ninety (90)
days from the date you discover, or should have discovered, the defect.
This limitation does not apply to implied warranties arising under the law
of any state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED
WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT APPLY
TO YOU UNDER SUCH CIRCUMSTANCES.
[0305]
Chapter 9: Appendix
Limited Canada Warranty
for LCD Televisions
Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers
in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND FLAT PANEL
TELEVISION (the “TELEVISION(S)” or “Television(s)”) AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
TELEVISIONS PURCHASED IN CANADA, AND USED ANYWHERE OUTSIDE OF CANADA
INCLUDING, WITHOUT LIMITATION, THE UNITED STATES AND MEXICO, ARE NOT
COVERED BY THESE WARRANTIES.
TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT
LIMITATION, THE UNITED STATES AND MEXICO, AND USED IN CANADA, ARE NOT
COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
Subject to the more limited warranty if the Television is used for any commercial or business
purposes as set out below, TCL warrants the Television and its parts against material defects in
materials or workmanship that result in the Television failing for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR
OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOUR.
a) FOR TELEVISIONS 32 INCHES OR LESS:
YOU MUST DELIVER THE ENTIRE TELEVISION TO A TCL TELEVISION AUTHORIZED
SERVICE PROVIDER (“ASP”). YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP.
b) FOR TELEVISIONS OVER 32 INCHES:
During this period, ASP personnel will come to your home when warranty service is
required. Depending on the type of repair required, the service will either be performed in
your home or the Television will be taken to an ASP for repair and returned to your home at
no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN
ASP. IF YOU ARE NOT WITHIN 100 KILOMETERS OF AN ASP, YOU MUST DELIVER
THE ENTIRE TELEVISION TO AN ASP. YOU MUST PAY FOR ALL TRANSPORTATION
AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP.
Limited Warranty for Commercial Units
TCL warrants Televisions that are used for any commercial or business purposes as follows: all
parts are warranted against material defects in materials or workmanship that result in the
Television failing for a period of ninety (90) days after the date of original retail purchase. DURING
THIS PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE THE DEFECTIVE PART WITH
A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU.
c) FOR TELEVISIONS 32 INCHES OR LESS:
YOU MUST DELIVER THE ENTIRE TELEVISION TO AN ASP. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND
FROM THE ASP.
d) FOR TELEVISIONS OVER OVER 32 INCHES:
During this period, ASP personnel will come on-site when warranty service is required.
Depending on the type of repair required, the service will either be performed on-site or the
Television will be taken to an ASP for repair and returned at no cost to you. ON-SITE
SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN ASP. IF YOU ARE NOT
WITHIN 100 KILOMETERS OF AN ASP, YOU MUST DELIVER THE ENTIRE
TELEVISION TO AN ASP. YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE ASP.
Rental Units
The warranty for Television rental units begins with the date of first rental or thirty (30) days from
the date of shipment to the rental firm, whichever comes first.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this Television must be performed by an ASP.
(3) The warranties from TCL are effective only if the Television is (i) purchased as new and
unopened from TCL or from TCL’s authorized distributors, dealers or resellers (“ADR’s”)
and (ii) located/operated in Canada.
(4) Labour charges for set installation, setup, adjustment of customer controls, and installation
or repair of antenna systems are not covered by these warranties. Reception problems
caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to material defects in materials or workmanship as limited above,
and do not extend to:
a. Service, repairs or replacement made necessary by accident, misuse, abuse, moisture,
liquids, dust, dirt, neglect, accident, damage, 24/7 applications, improper installation,
improper operation, improper cleaning, improper maintenance, normal wear and tear,
screen burn or image retention caused by prolonged display of static images and/or
phosphor aging, or any other external cause or event, act or omission outside the
control of TCL, including fire, theft, acts of God, alteration, power failures, power surges
or power shortages, lightning, other electrical faults, or repairs, modifications or
replacements by persons other than those authorized by TCL to service the Television;
b. Replacement of missing, discarded or lost parts, the provision of retrofits, or preventive
maintenance;
c. Repair of damage that is cosmetic only or does not affect the Television functionality,
such as wear and tear, scratches and dents;
d. Service on Toshiba-branded accessory items (such accessory items may be covered
by their own warranty);
e. Service on third party products or service made necessary by use of incompatible third
party products;
f. Service made necessary by the simultaneous use of this Television and connected
equipment;
g. Modifications to the Television not approved in writing by TCL, and service made
necessary by the use or installation of non-Toshiba modifications to the Television;
h. Service of a Television on which the TOSHIBA label or logo, rating label or serial number
have been defaced or removed;
i. On-site service and repair of the Television; and
j. Damage to the Television caused by failure to follow the specifications, User manuals or
guides as to usage and/or storage.
Disclaimer and Limitation of Remedy
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS AND IMPLIED
WARRANTIES, CONDITIONS AND REPRESENTATIONS FOR THIS TELEVISION,
INCLUDING THE IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED AND EXCLUDED. IF THE APPLICABLE LAW, STATUTORY OR OTHERWISE,
PRECLUDES THE EXCLUSION OF ANY IMPLIED WARRANTIES, CONDITIONS AND
REPRESENTATIONS THEN SUCH IMPLIED WARRANTIES, CONDITIONS AND
REPRESENTATIONS ARE OTHERWISE LIMITED IN DURATION TO THE TERM OF THIS
EXPRESS WRITTEN LIMITED WARRANTY. TO THE EXTENT NOT PRECLUDED BY LAW,
STATUTORY OR OTHERWISE, THIS WRITTEN WARRANTY SUPERCEDES AND
SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY, CONDITION OR REPRESENTATION
NOT STATED IN THIS WARRANTY, WHETHER MADE BY TCL, TOSHIBA CORPORATION,
THEIR AFFILIATES, ADRs AND ASPs AND WHETHER MADE ORALLY OR IN WRITING
(INCLUDING ANY STATEMENT IN ANY BROCHURE, PRESS RELEASE, ANNOUNCEMENT,
ADVERTISEMENT, POINT OF SALE DISPLAY, ETC.).
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE INSTRUCTIONS IN THE
APPLICABLE USER GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION
MAY NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE. THIS WARRANTY WILL
NOT COVER ANY SERVICE THAT IS REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF ANY
FAILURE TO FOLLOW THE SET-UP AND USAGE INSTRUCTIONS. THIS WARRANTY DOES
NOT APPLY AND SHALL BE VOID AND UNENFORCEABLE IF THE TELEVISION IS OPENED,
SERVICED, OR REPAIRED BY PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO
SERVICE OR REPAIR THE TELEVISION.
IF THE TELEVISION FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE
REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN NO EVENT WILL
TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE “RELATED
PARTIES”) BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES, MONEY,
REIMBURSEMENT, COSTS OR EXPENSES. THIS LIMITATION APPLIES TO DAMAGES,
MONEY, REIMBURSEMENT, COSTS OR EXPENSES OF ANY KIND WHATSOEVER INCLUDING
ANY DIRECT OR INDIRECT DAMAGES, DAMAGE TO PROPERTY OR PERSON, LOST PROFITS,
LOST SAVINGS, INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR
CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH OF WARRANTY, BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), UNDER A STATUTE OR UNDER ANY OTHER
LAW OR FORM OR ACTION, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO
USE THE TELEVISION, EVEN IF ANY OF THE RELATED PARTIES HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the
terms of these warranties in any manner whatsoever.
Arbitration and Dispute Resolution
To the extent not precluded by law, any claim, dispute, controversy or disagreement (whether for
breach of warranty, breach of contract, tort (including negligence), under a statute or under any
other law or form of action) against any of the Related Parties arising out of, or otherwise relating
to: (i) this warranty; (ii) the Television; (iii) any oral or written representations, statements,
brochures, press releases, advertising, announcement, point of sale display, or promotional
material relating to the Television; (iv) the relationships that result from this warranty, (the
foregoing claims, disputes controversies and disagreements are collectively referred to as the
“Dispute”), shall be referred to and resolved by final and binding arbitration (to the exclusion of
the courts). To the extent not precluded by law, you agree to waive any right that you may have
to commence or participate in any representative or class proceeding against the Related Parties
relating to any Dispute. If and where applicable and to the extent not precluded by law, you
further agree to opt out of any such representative or class proceedings. Arbitration of any
Dispute will be conducted in the forum and in the manner as agreed to between you and TCL.
Failing such agreement, the arbitration will be conducted by one arbitrator pursuant to the laws
and rules relating to arbitration generally in force in the jurisdiction in which you reside at the time
that the Dispute arises. To the extent not precluded by law, no claim, dispute, controversy or
disagreement of any other person may be joined or combined with any Dispute by you, without
the prior written consent of TCL.
Critical Applications
The Television you have purchased is not designed for any “critical applications.” “Critical
applications” means life support systems, medical applications, connections to implanted
medical devices, commercial transportation, nuclear facilities or systems or any other
applications where Television failure could lead to injury to persons or loss of life or catastrophic
property damage.
IF THE CUSTOMER USES THE TELEVISION IN ANY CRITICAL APPLICATION, THE CUSTOMER
- AND NOT TCL, ITS AFFILIATES, ADRs OR ASPs - ASSUME SOLE AND FULL RESPONSIBILITY
FOR SUCH USE. TCL RESERVES THE RIGHT TO REFUSE TO SERVICE ANY TELEVISION USED
IN A CRITICAL APPLICATION. TCL, ITS AFFILIATES, ADRs AND ASPs HEREBY DISCLAIM ANY
AND ALL LIABILITY, DAMAGES AND CONSEQUENCES ARISING OUT OF THE SERVICE OR
REFUSAL TO SERVICE SUCH TELEVISION AND FURTHER DISCLAIM ANY AND ALL LIABILITY,
CONSEQUENCES AND DAMAGES THAT MAY ARISE OR RESULT FROM THE USE OF THE
TELEVISION IN ANY CRITICAL APPLICATIONS.
General Provisions
If and to the extent that any provision of this limited warranty should generally be found to be
unenforceable, the unenforceable provision shall be severed from the warranty and deemed not
to form part of the warranty. The remaining provisions of this warranty shall be and remain valid
and enforceable. If and to the extent that any provision of this limited warranty as it relates to any
of the Related Parties is found to be invalid or unenforceable in respect of that party (the
“Excluded Party”), the Excluded Party shall be deemed to be severed or excluded from the
provision, and the provision shall remain valid, enforceable and applicable in respect of the other
or remaining Related Parties.
To the extent permitted by law, this limited warranty shall be governed and construed in
accordance with the laws of Ontario.
If there is any inconsistency between this limited warranty, on the one hand, and any statement
in the packaging of the Television or in any other document enclosed with, or used in the context
of the promotion or sale of, the Television, on the other hand, the provisions of this limited
warranty shall prevail.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and checking the
“Troubleshooting” section, you find that service is needed:
(1) To find the nearest ASP, visit TCL's web site at www.toshiba.ca, or call toll free 1 800 2683404
(2) Present your bill of sale or other proof of purchase to the ASP.
For additional information, visit TCL's website at www.toshiba.ca
63
Chapter 9: Appendix
A copy of the GPL source code in this product may be obtained by
contacting Toshiba Consumer Solutions at (800)631-3811. There will be
a charge to cover the costs of providing the source code.
A copy of the LGPL source code in this product may be obtained by
contacting Toshiba Consumer Solutions at (800)631-3811. There will be
a charge to cover the costs of providing the source code.
USB Protocol Copyright © 2005 The NetBSD Foundation, Inc. All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
(1) Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
(2) Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
(3) Neither the name of The NetBSD Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specified prior written permission.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC.
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
This product includes software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org).
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
OpenSSL 0.9.7d Copyright © 1998-2000 the OpenSSL Project. All Rights
reserved. Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions
are met:
(1) Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
(2) Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
(3) All advertising materials mentioning features or use of this software
must display the following acknowledgement: This product includes
software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://openssl.org).
(4) The names “OpenSSL Toolkit” and “Open SSL Project” must not be
used to endorse or promote products derived from this software
without prior written permission. For written permission, please
contact openssl-core@openssl.org.
(5) Products derived from this software may not be called “OpenSSL” nor
may “Open SSL” appear in their names without prior written
permission of the OpenSSL Project.
(6) Redistributions of any form whatsoever must retain the following
acknowledgement: “This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit (http://
www.openssl.org).”
64
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS”
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product
includes cryptographic software written by Eric Young
(eay@cryptsoft.com). This product includes software written by Tim
Hudson (tjh@cryptsoft.com).
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com). All Rights
reserved. This package is an SSL implementation written by Eric Young
(eay@cryptsoft.com). The implementation was written so as to conform
with Netscapes SSL. This library is free for commercial and noncommercial use so long as the following conditions are adhered to. The
following conditions apply to all code found in this distribution, be it the
RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in
the code are not to be removed. If this package is used in a product, Eric
Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup
or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
(1) Redistributions of source code must retain the copyright notice, this
list of conditions and the following disclaimer.
(2) Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
(3) All advertising materials mentioning features or use of this software
must display the following acknowledgement: “This product includes
cryptographic software written by Eric Young (eay@cryptsoft.com).”
The word ‘cryptographic’ can be left out if the routines from the library
being used are not cryptographic related.
(4) If you include any Windows specific code (or derivative thereof) from
the apps directory (application code) you must include an
acknowledgement: “This product includes software written by Tim
Hudson (tjh@cryptosoft.com).”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. The license and distribution terms for any publicly available
version or derivative of this code cannot be changed, i.e. this code cannot
simply be copied and put under another distribution license (including the
GNU Public License).
Index
A
H
R
Antenna cable ................................ 12
Antenna input configuration ............ 29
Audio quality adjustments ............... 45
Audio system connection ................ 18
Auto aspect .................................... 41
Auto power off ................................ 53
HDMI audio mode ........................... 32
HDMI cable .................................... 12
HDMI™ connection .......................... 17
RECALL button ...............................53
Remote control
Battery installation ....................20
Device code table.....................25
Effective range .........................20
Functional key chart .................23
Learning about the buttons .......21
Programming ...........................24
B
Back of the TV................................ 11
Base closed captions ...................... 43
Blocking channels .......................... 49
C
Cable box connection ..................... 14
CableClear® ..................................... 55
Camcorder connection .................... 16
CH Bb buttons ........................ 21, 38
CH RTN button ......................... 21, 38
Channel Browser Setup .................. 36
Channel Browser™ ........................... 36
Channel labeling ............................ 31
Channel Number buttons .......... 21, 38
Channel programming
Automatic programming ........... 30
Manually adding and deleting ... 30
Cinema mode ................................. 41
Closed captions .............................. 43
Color temperature .......................... 55
ColorStream® ................................... 15
Component video ........................... 15
Component video cables ................ 12
Connecting Cables ......................... 12
I
INFO button.................................... 53
INPUT button.................................. 35
Installation, care, and service ............ 3
Installation, setup .............................. 9
Integrated digital tuning ..................... 8
L
Labeling video input ........................ 35
Language selection ......................... 29
Last mode memory feature ............. 53
LED indications.........................10, 60
LOCKS menu
Channels, blocking................... 49
Enable rating blocking .............. 48
New PIN code.......................... 47
Panel lock ................................ 51
Unlocking programs
temporarily ................. 50
Video inputs, locking ................ 50
Locks menu .................................... 47
M
MPEG noise reduction .................... 56
MTS feature ................................... 45
MUTE button .................................. 44
O
Optical audio cable ......................... 12
Optical audio output format ............. 46
D
P
Digital Audio Out ............................ 18
Digital audio selector ...................... 44
Digital CC Settings ......................... 43
Digital signal meter ......................... 33
Dolby Digital ................................... 18
Dolby Digital Dynamic Range
Control....................................... 46
DVD player connection ................... 15
DVI connection ............................... 17
DynaLight™ ................................... 42
Dynamic contrast............................ 54
PC Audio ........................................ 52
PC connection ................................ 19
PC settings ..................................... 51
Picture adjustment .......................... 42
Picture mode .................................. 42
Picture quality ................................. 42
Picture scroll ................................... 40
Picture size selection ...................... 39
POWER button .........................10, 21
Power-On Mode ............................. 34
Reset Factory Defaults ....................33
S
Safety ...............................................2
SAP sound .....................................45
Satellite receiver connection ............15
Scroll settings .................................40
Selecting Menu Language ...............29
Service .............................................4
Side panel control ...........................10
Sleep timer .....................................52
Specifications .................................61
StableSound®................................... 46
Stereo sound ..................................45
SurfLock™ ........................................ 38
S-video cable ..................................12
System status .................................33
T
TheaterWide® picture size ...............39
Troubleshooting ..............................58
TV status information ......................53
V
V-Chip blocking (Locks menu) .........47
VCR connection ................. 13, 14, 15
Video cables ...................................12
Video input label .............................35
Video input lock ..............................50
W
Warranty
Canada ....................................63
U.S. .........................................62
WOW:SRS 3D ................................57
WOW:SRS Focus ...........................57
WOW:SRS TruBass ........................57
F
Features, TV .................................... 8
Front of the TV ............................... 10
G
Game Mode feature ........................ 56
65
Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470- 5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA – TEL: (514) 390-7766
VANCOUVER: 13551 COMMERCE PARKWAY, SUITE 110, RICHMOND, B.C., V6V 2L1, CANADA – TEL: (604) 303-2500
MANUFACTURED BY
CableClear, ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C.
Channel Browser, SurfLock, and DynaLight are trademarks of Toshiba America Consumer Products, L.L.C.
REGZA is a trademark of Toshiba Corporation.
PRINTED IN USA
(07-05)