Audiovox D1708PK Operating instructions

VME9020TS
MULTIMEDIA RECEIVER
MANUAL/WARRANTY CARD
CONTENT
- Preparation
p. 3
- Adjustment of the Touch Screen Monitor
p. 5
- Installation
p. 6
- Controls and Indicators
p. 10
- Front Zone Remote Control
p. 13
- Multi-ZONE Remote Control
p. 18
- Using the TFT Monitor
p. 20
- Operating Instructions
p. 23
- System Setup Menu
p. 27
- Tuner Operation
p. 35
- RDS Information
p. 37
- DVD Player Operation
p. 40
- DVD Setup Menu
p. 50
- CD/MP3/WMA Operation
p. 58
- SD Card Reader Operation
p. 61
- iPod Operation
p. 64
- TV Tuner Operation
p. 67
- Troubleshooting
p. 69
- Specifications
p. 73
- Guarantee conditions, warranty card
p. 76
PREPARATION
Congratulations on your purchase of the Audiovox VME9020TS Mobile Multimedia
AM/FM/DVD/TV Tuner/SD Card/iPod (ready) Receiver.
It’s a good idea to read all of the instructions before beginning the installation. We
recommend having your Audiovox VME9020TS installed by a reputable installation
shop.
Features
• ISO Double-DIN chassis
• Light weight proprietary DVD core mechanism
• Wide screen (16:9) 6.5" TFT touch screen monitor
• 280 watts total system power
• Center channel speaker output - 1 X 22 watts RMS, 40 watts peak
• Multi-Zone media distribution
• AM/FM RDS Tuner
• TV Tuner with diversity antenna's
• Supports NTSC and PAL, auto negotiation
• Full, Wide, Normal and Off (Standby) screen modes
• Motorized TFT panel has 16 precise angle adjustments via remote control or infinitely variable manual adjustment from the front panel
• Auto-activated rear view camera input - Reverse gear over rides the TFT screen to display video from a rear mounted camera
• Over current motor protection for obstructed TFT panel
• Compatible optical / SD Card formats: DVD-R/RW, DVD+R/RW, CD-R/RW, CDDA, MP3, WMA, HDCD, SVCD, VCD, MPEG (MPEG 1), MPEG 4, JPEG, MP3/WMA
files burned onto a DVD+R/RW or DVD-R/RW and Kodak Picture CD
• SD Card slot
• Multi-language, multi-subtitle and multi-angle playback options
• Last position memory for optical disc
• Parental Lock - Uses a password and disc rating set-up to prevent unauthorized user
access from display content
• Audio Mute
• 5-Way joystick navigation
• Two remote controls - a full function front remote control and a limited function KidZone remote control for back seat operation
3
• Over and under voltage protection to insure the unit operates within designed parameters
• Damped DVD mechanism with 16 Mbit flash memory ESP (Electronic Shock
Protection) provide smooth disc playback under the severest road conditions
Tools and Supplies
You will need these tools and supplies to install your VME9020TS:
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 - 18 gauge speaker wire
WARNINGS!
- Only connect the unit to a 12-volt power supply with proper grounding.
- Never install this unit where operation and viewing could interfere with safe driving
conditions.
- To reduce the risk of a traffic accident (except when using for a rear view video camera) never use the video display function while driving the vehicle. This is a violation of
federal law.
- Never disassemble or adjust the unit without the assistance of a professional.
For details, please consult your local car stereo specialty shop.
- To prevent injury from shock or fire, never expose this unit to moisture or water.
- Never use irregular discs.
- To prevent damage to the mechanism inside this unit, avoid impact to the TFT
monitor.
- To prevent damage to the touch screen display, do not use metal, plastic or any other
object to attempt to operate the touch screen functions. The touch screen function was
designed for hand/finger operation only.
- The monitor employs an automatic motorized mechanism. To prevent damage to the
core mechanism, please do not push, pull or swivel the monitor manually.
4
Battery disposal:
At the end of the product´s useful life, please dispose of it at
appropriate collection points provided in your country.
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-)
battery cable prior to installation.
NOTE: If the VME9020TS is to be installed in a car equipped with an on-board drive
or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution
during installation to avoid causing a short circuit.
ADJUSTMENT OF THE TOUCH SCREEN MONITOR
(SCREEN CAL)
To offer the best performance it is necessary to do the following adjustment direct after
the installation into the customers car:
Within the System Setup you will find the Screen Calibration.
Once you select this choice then you will get a green cross at the left upper area at the
screen. Please push the middle of the cross for 1 second and then the green cross appears in the lower right corner. Please push once more for 1 second the middle of the
cross. Once you did this then the unit switch back to the System Setup and the adjustment is finished.
5
INSTALLATION
This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported
cars. The unit has threaded holes in the chassis side panels which may be used with the
original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai,
Honda... vehicles to mount the radio to the dashboard. Please consult with your local
car stereo specialty shop for assistance on this type of installation.
1. Remove the existing factory radio from the dashboard or center console mounting.
Save all hardware and brackets as they will be used to mount the new radio.
2. Remove the factory mounting brackets and hardware from the existing radio and
attach them to the new radio.
CAUTION: Do not exceed M5 X 6 MM screw size. Longer screws may
touch and damage components inside the chassis.
SUBJECT TO TECHNICAL CHANGE
6
3. Place the radio in front of the dashboard opening so the wiring can be brought
through the mounting sleeve. Follow the wiring diagram carefully and make certain all
connections are secure and insulated with wire nuts or electrical tape. After completing
the wiring connections, plug the ISO connectors into the mating sockets on the rear of
the chassis. Turn the unit on to confirm operation (vehicle ignition switch must be “on”).
If the unit does not operate, re-check all wiring until the problem is corrected.
4. Mount the new radio assembly to the dashboard or center console using the reverse procedure in step 1.
CAUTION: For proper operation of the CD player, the chassis must be
mounted within 30° of horizontal. Make sure the unit is mounted within this limitation.
NOTE: It is the end-users responsibility to install and operate this unit
in a manner in accordance with local, state and federal laws. The
PARKING BRAKE wire MUST BE CONNECTED as directed in the manual.
CAUTION: Do not block the cooling fan exit. If blocked, the unit may
overheat and become damaged.
Using the iAUX3 External AV Connector
The iAUX3 allows you to connect a variety of external devices, including a VCR, DVD
player, portable MP3 player, etc., to your VME9020TS without removing the radio.
To install the iAUX3, connect it to the AUX-IN cables on the back of the VME9020TS
(see “Wiring” on page 9), and then install the iAUX3 in a location convenient for plugging in auxiliary devices.
7
Using the Cosmetic Trim Ring
A trim ring is packaged with the VME9020TS for installation flexibility. The
VME9020TS will fit into most import dashes with little or no modification to the dash
board/cavity. Some European and US domestic vehicle dashes will accept a DoubleDIN chassis, but there is usually a small gap between the radio and dash piece after
installation is complete. In this case, use the trim ring to conceal any gaps that may be
present.
Replacing the Fuse
When replacing the fuse, use a new 10A replacement fuse. Using a fuse with an improper rating could damage the unit and cause a fire.
SUBJECT TO TECHNICAL CHANGE
8
WIRING
iPod
SUBJECT TO TECHNICAL CHANGE
9
CONTROLS AND INDICATORS
1. POWER/MUTE
Press the POWER/MUTE button (1) once to turn the unit on. Press again to mute the
volume. Press and hold to turn the unit off.
2. AUDIO/LOC
Press the AUDIO/LOC button (2) to access the audio menu and change and/or confirm audio settings. Press and hold to activate or deactivate the LOCAL (LOC) setting.
3. VOL +
Press to increase the volume.
4. VOL Press to decrease the volume.
5. Joystick/ENTER
Press in on the joystick to perform the “enter” function during various applications. Push
the key up, down, left or right to perform the following tasks:
6. Joystick/
• DVD Mode: Press once for fast forward/fast reverse.
• TUNER Mode: Press to go up one frequency step. Press and hold the button for 2
seconds to activate/deactivate the RDS REG function.
• MENU Mode: Press once to move the cursor up.
• TV Mode: Press once to select a stored TV channel.
7. Joystick/
• DVD Mode: Press once for slow forward/slow reverse.
• TUNER Mode: Press to go down one frequency step. Press and hold the button for 2
seconds to activate/deactivate the RDS TA function.
• MENU Mode: Press once to move the cursor down.
• TV Mode: Press once to select a stored TV channel.
8. Joystick/
DVD Mode: Press once to play back previous chapter/track.
• TUNER Mode: Press once to auto search for the previous available radio station. Press
and hold to increase the tuner frequency step-by-step.
• MENU Mode: Press once to move the cursor to the left.
• TV Mode: Press to go down one frequency step.
10
9. Joystick/
• DVD Mode: Press once to enter the next chapter or track.
• TUNER Mode: Press once to auto-search the next available radio station. Press and
hold to decrease the tuner frequency step-by-step.
• MENU Mode: Press once to move the cursor to the right.
• TV Mode: Press to go up one frequency step.
10. TUNER
Press to access the radio tuner source and then to change between AM and FM bands.
11. MENU/SRC
Press to access the playing source menu.
12. OPEN
Press the OPEN button (12) to activate the automatic mechanical system and move the
TFT down, exposing the disc and SD card slots. Press again to close the TFT.
13. DISP/PIC
Press the DISP/PIC button (13) to adjust the display aspect of the picture to one of
three settings: Wide, Full or Normal. Press and hold to access picture settings.
14. CH+
• Press and hold the CH+ button (14) to adjust the monitor position upright.
• Press to play the next preset AM/FM station.
• Press to play the next stored TV channel.
15. CH• Press and hold the CH- button (15) to adjust the monitor position outward.
• Press to play the previous preset AM/FM station.
• Press to play the previous stored TV channel.
16. TV
• Press to access the TV tuner source.
17. TFT Display
18. DVD
• Press to access the DVD player source.
19. SD
• Press to access the SD card source.
20. IR Remote Control Receiver
11
21. Disc Slot
22. Eject Button
• Press once to eject the disc.
• Press and hold to reset the mechanism.
23. Disc Indicator
24. SD Card Slot
25. Reset Button
SUBJECT TO TECHNICAL CHANGE
12
FRONT ZONE REMOTE CONTROL FUNCTIONS
Button Name/Ref #
MENU 1:
DVD: Enters the main menu of the disc
VCD: Turns on PBC when playing VCD
TITLE 2:
DVD: Enters the title menu of the disc
VCD: Plays first ten seconds of each chapter/title
MUTE 3
Toogles on/off audio output
POWER 4:
DVD/VCD/Tuner/CD/MP3: Turns the power on. Press and hold to turn the power off.
AUDIO 5:
Changes the audio language for disc playback
REPT A-B 6:
DVD/VCD: Setup to repeat playback from time frame A to time frame B
REPT 7:
DVD/VCD: Repeats playback of current chapter
CD/MP3: Repeats playback of current track
SCR 8:
DVD/VCD/Tuner/CD/MP3/iPod: Selects front zone playback source
SUBTITLE 9:
DVD: Language selection for subtitle
DISP 10:
DVD/VCD/Tuner/CD/MP3: Displays playing information
13
ANGLE 11:
DVD/VCD/TUNER/CD/MP3: Continuously adjusts front panel tilt angle
ANGLE 12:
DVD/VCD/TUNER/CD/MP3: Continuously adjusts front panel tilt angle
ANGLE 13:
DVD: Plays back disc in different angle for a scene
VCD: Plays back Picture CD with different angle of picture displayed
14:
DVD/VCD/TUNER/CD/MP3: Fast forwards the disc content
VOL- 15:
DVD/VCD/TUNER/CD/MP3: Decreases volume
VOL+ 16:
DVD/VCD/TUNER/CD/MP3: Increases volume
17:
DVD: Selects the previous chapter for playback
VCD: Selects the previous chapter for playback
TUNER: Searches an available radio station by decreasing tuning frequency
CD/MP3: Selects the previous track for playback
/II 18:
DVD: Pauses playback/starts playback
VCD: Pauses playback/starts playback
TUNER: Scans FM/AM radio station; plays/stores radio station; deletes radio station
CD/MP3: Pauses playback/starts playback
19:
DVD: Selects the next chapter for playback
VCD: Selects the next chapter for playback
TUNER: Searches an available radio station by increasing tuning frequency
CD/MP3: Selects the next track for playback
14
/BAND 20:
DVD: Stops playback
VCD: Stops playback
TUNER: Selects FM/AM band
CD/MP3: Stops playback
GOTO 21:
DVD/VCD: Goes to specific time frame and playback
II 22:
DVD/VCD: Slow playback/slow rewind playback
ZOOM 23:
DVD/VCD: Zooms in/out on an image
PIC 24:
DVD/VCD: Displays set-up parameters
OPEN/CLOSE 25:
DVD/VCD/TUNER/CD/MP3: Opens/Closes the TFT monitor
v 26:
v
DVD/VCD/TUNER/CD/MP3: Decreases monitor tilt angle
^
^ 27:
DVD/VCD/TUNER/CD/MP3: Increases monitor tilt angle
WIDE 28:
DVD/VCD/TUNER/CD/MP3: Selects display mode: WIDE, NORMAL, or FULL
0-9 (Numeric Keypad) 29:
DVD: Directly accesses chapter
TUNER: 1-6 selects preset for current band
CD/MP3: Directly accesses track
15
DVD SETUP 30:
DVD/VCD/TUNER/CD/MP3: Access DVD Setup menu
SYS SETUP 31:
DVD/VCD/TUNER/CD/MP3: Access System Setup menu
SEL 32:
Audio adjustment (EQ, Bass, Treble, Fader, Bal, Sur, Loud)
RDM 33:
DVD: Plays all chapters in random order
CD/MP3: Plays all tracks in random order
SCN 34:
CD/MP 3: Plays the first ten seconds of each track
EJECT 35:
DVD/VCD/TUNER/CD/MP3: Ejects disc
16
Note: Your remote control may differ slightly from the one pictured
here. The above diagram is for illustrative purposes only.
SUBJECT TO TECHNICAL CHANGE
17
MULTI-ZONE REMOTE CONTROL FUNCTIONS
Button Name/Ref #
MENU 1:
DVD: Enters the main menu of the disc
VCD: Turns on PBC when playing VCD
TITLE 2:
DVD: Enters the title menu of the disc
VCD: Plays first ten seconds of each chapter/title
MUTE 3:
DVD/VCD: Toggles on/off audio output
AUDIO 5:
DVD: Switches the audio language for disc playback
REPT 7:
DVD/VCD: Setup to repeat playback of each chapter/title/disc
R.SRC 8:
DVD/VCD: Selects playing mode for rear zone
SUBTITLE 9:
DVD: Language selection for subtitle
14:
DVD/VCD: Fast forwards the disc content
17:
DVD/VCD: Selects the previous track/chapter for playback
/II 18:
DVD/VCD: Pauses playback/Starts playback
18
19:
DVD/VCD: Selects the next track/chapter for playback
GOTO 21:
DVD/VCD: Goes to specific time frame and playback
II 22:
DVD/VCD: Slow playback/slow rewind playback
0-9 (Numeric Keypad) 29:
DVD: Directly accesses chapter
Note: Your remote control may differ slightly from the one pictured
here. The above diagram is for illustrative purposes only.
SUBJECT TO TECHNICAL CHANGE
19
USING THE TFT MONITOR
Open/Close TFT Monitor
Press the OPEN button (12) on the front panel or press the () button (25) of the front
zone remote control to open/close the monitor.
TFT Monitor Auto Open
• If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically
moves to the last viewing position.
• If “TFT Auto Open” is ”off” when the unit is turned on, press the OPEN button (12)
or () button (25) on the front zone remote control to move the monitor into the desired viewing position.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to the
viewing angle. The monitor angle can be adjusted for optimum viewing using one of
the following methods:
v
• Press the ( ^
^ ) or ( v ) buttons (3, 4) on the remote control or the CH+ or CH- button
(14, 15) on the front of the unit to adjust the tilt angle of the screen one step at a time
• Press and hold the to adjust the tilt angle of the screen one step at a time.
Rear Camera Mode
When the vehicle is placed in "Reverse", and an optional rear camera is connected to
the VME9020TS, the TFT monitor will automatically switch to the camera input source.
Aspect Ratio
The following sources only have the WIDE and OFF aspect ratio option: AM/FM RDS
Tuner, CD-DA, SD Card, DVD+R/RW, DVD-R/RW and CD-R/RW with music files.
Press the WIDE button (28) on the remote control to adjust the aspect ratio as follows:
20
FULL
The entire screen is extended
horizontally to the aspect ratio of 16 to
9. The extension ratio is the same at
any point.
WIDE
The screen is extended horizontally to
the aspect ratio of 16 to 9. The
extension ratio increases toward the
right and left ends of the screen.
NORMAL
The conventional display image has a
4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
OFF
Image Setting
Video Output Format
Table 3 shows the video output format for each playing source.
Table 3: Video Output Formats
Playing Source Video Output Format
TUNER
RGB Mode
DVD
RGB Mode
AUX IN
CVBS Mode
CAMERA
CVBS Mode
TV
CVBS Mode
*CVBS - Composite Video Baseband Signal
SUBJECT TO TECHNICAL CHANGE
21
Adjustable Parameters
While in DVD or TUNER mode, the only parameter that can be adjusted is brightness
(BRIGHT). To access “PICTURE”, “COLOR”, ”CONTRAST”, and “TINT” you must be in
AUX or CAMERA mode.
NOTE: The default adjustment is “0” in PAL mode. Tint is unavailable for adjustment.
Parameter Adjustment Procedure
1. Enter Picture Quality Setting mode:
Press the PIC button (24) on the remote or press and hold the DISP/PIC button (13)
on the unit.
2. Select Item to Set:
Press the () (II) buttons (14, 22) on the remote or press and hold the () or () buttons (18, 19) on the monitor panel.
3. Set Parameters:
Press () () buttons (17, 19) on the remote or press () () buttons (8, 9) on the
unit.
4. Exit Picture Quality Setting Mode:
Press the PIC button (24) on the remote or press and hold the DISP/PIC button (13)
on the monitor panel.
Parking Brake Inhibit
• When the “PRK SW” cable is connected to the brake switch, the display on the TFT
monitor will display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to CAMERA.
• When the parking brake inhibit is active, the front monitor displays “Parking Is On”,
preventing the driver from watching content while driving. Rear video screens are not
affected.
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the motion will stop automatically to prevent damage to the mechanism or monitor.
Normal operation is resumed by pressing the OPEN button (12) or disconnecting and
reconnecting the power.
22
OPERATING INSTRUCTIONS
Power On / Off
Press the MUTE button (1) to turn the unit on. The buttons on the front of the unit light
up.
Press and hold the MUTE button (1) on the front panel or the POWER button (4) on
the remote to power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The beep tone cannot be disabled.
Mute
Press the MUTE button (1) on the front panel or the MUTE button (3) on the remote to
mute the volume from the unit. Press the MUTE button again to restore the volume. The
mute icon flashes on the right side of the screen. Adjusting the volume or using any of
the audio set-up features cancels the mute function.
Playing Source Selection
Press the SRC button (11) on the remote to change between available playing sources
in the following order: TUNER, DVD, AUX IN, iPod or CAMERA (rear view video camera). The playing mode is displayed on the screen.
Press the MENU/SRC button (11) on the unit to access the playing source menu. Use
the direction buttons on the joystick (6, 7, 8, 9) or remote control (14, 17, 18, 19, 22)
to select a playing source, then press the /II button (18) or the joystick enter button
(5) to enter the selected source.
AUX IN Mode
An external peripheral device can be connected to this unit via RCA output and “AUXIN”.
CAMERA Mode
“CAMERA” mode is only available if the camera is connected and during reverse driving. To install a rear view video camera, connect the video input cable to the camera
output cable.
23
Volume Adjustment
To increase or decrease the volume level, turn the ROTARY ENCODER (6) on the
front panel or press the VOL+/VOL- buttons (15, 16) on remote control. When the
volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit
has been reached. The volume ranges from “0” to 40”. The LCD or TFT screen displays
the volume level for 3 seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting regardless of the volume
setting prior to turning the unit off.
To program a specific volume level, push and hold the AUDIO button (2) while the yellow volume bar is displayed on the screen. The unit will beep two times to confirm your
turn-on volume setting.
AUDIO CONTROL MENU
The Audio Control feature allows you to easily adjust your audio system to meet the
acoustical characteristics of your vehicle, which vary depending on the type of vehicle
and its measurements. To get the best possible sound quality from your new system, be
sure to adjust the settings for the speakers as well. Proper setting of the Fader and
Balance boosts the effects of the cabin equalizer.
Accesing the Audio Control Menu
Push the AUDIO/LOC button (2) on the front panel once to display the “AUDIO”
menu.
Selecting an Audio Feature for Adjustment
Press the ()/() buttons (8, 9) on the joystick or the ()/() buttons (17, 19) on the
remote control to select the audio feature to be adjusted.
Adjusting an Audio Feature
Press the ()/(II) buttons (14, 22) on the remote control or the ()/() buttons (6, 7)
on the joystick to adjust the selected feature to the desired setting.
24
Table 4: Audio Adjustments
Audio Function
Adjustable Range
EQ
User
Flat
Jazz
Pop
Classical
Bass
Treble
Rock
Vocal
-14 to +14
-14 to +14
Fade
-9 to +9
Bal
SW
Loud
-9 to +9
- 7 to +7
Off, 1-4
Note: The Bass and Treble levels are only adjustable when EQ is set
to “User” mode.
The Loud function compensates for deficiencies in sound ranges at low levels. Loudness
levels range from 1-4 or “off”. When the Loud function is on, LOUD is displayed on the
screen.
Exiting the Audio Control Menu
Press and hold the AUDIO/LOC button (2) or stop making adjustments for a few
seconds to exit the audio control menu.
25
Six-Channel Audio Control
Note: Before adjusting the volume of any speaker, please refer to “Surround Setup” on
page 55.
Table 5:6-Channel Audio Adjustments
Item
Adjustable Range
Master Volume
Front Left Channel Volume
00 to 40
-10 to +10
Front Right Channel Volume
-10 to +10
Rear Left Channel Volume
-10 to +10
Rear Right Channel Volume
Center Channel Volume
-10 to +10
-10 to +10
Subwoofer Volume
-10 to +10
Rear Zone
If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in the back seat can control the DVD output using the rear zone remote control. See “Multi-Zone Remote Control” on page 18 for instructions.
System Reset
To correct a system halt or other illegal operation, use the tip of a
pen to press the RESET button (25) located on the front bottomleft corner of the unit. After a system reset, the unit restores all
factory default settings.
(RESET) Button
Note: If the unit is reset while a DVD is playing, the DVD resumes play once the reset
is complete.
Line Mute
If the “MUTE” wire is connected, audio output mutes when a telephone call is received
by the car phone. See “Wiring” on page 9.
26
SYSTEM SETUP MENU
In “System Setup” mode, “ASP CONFIG”, “RDS SETUP” and “GENERAL SETUP” are
available for adjustment. Setup can be performed by pressing the dedicated button on
the remote control or by pressing the MENU/SRC button (11) on the front panel.
For system settings, press the SYS SETUP button (31) on the remote control or touch
“SETUP” on the screen to enter the “SETUP” menu. “SYS SETUP” is highlighted in green.
General Setup Menu
Accessing the General Setup Menu
To access the “GENERAL SETUP” Menu, press the direction buttons on the joystick (6,
7, 8, 9) or remote control (14, 17, 18, 19, 22) to highlight “GENERAL SETUP” in green.
Press the/ II button (18) on the remote control to enter the “GENERAL SETUP” menu.
A menu appears with the option for the first item, “Radio”, highlighted in light blue.
SUBJECT TO TECHNICAL CHANGE
27
Selecting a Feature for Adjustment
Press the or IIbuttons (14, 22) on the remote control or the or buttons (6,
7) on the joystick to select the feature to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust by pressing the/ II button
(18) on the remote or by pressing the ENTER (joystick) button (5) on the unit. A submenu appears in a second row with the selected option highlighted in light blue.
2. Select a new value by pressing the or IIbuttons (14, 22) on the remote control
or the or buttons (6, 7) on the joystick.
3. Confirm your selection by pressing the II, , or buttons (14, 17, 19) on the
remote control, or the or button (8, 9) on the joystick. The new value is highlighted
in light blue and setup is complete.
SUBJECT TO TECHNICAL CHANGE
28
Table 6: General Setup Menu Features
Setting
Options
Function
Radio
USA1
Select the appropriate setting
based on the country in which you
reside.
S. Amer 1
Arabia
China
S. Amer 2
Europe
Korea
Clock Mode
Screen Saver
12H
Clock displays 12 hour time using AM and PM.
24H
Clock displays 24 hour time up to 23:59.
On
Turn screen saver on/off.
Off
TV System
Auto
NTSC
TFT Auto Open
The color signal output is switched automatically
based on the current disc.
The color signals are output in the standard NTSC
format.
PAL
The color signals are output in the standard PAL
format.
On
The TFT panel automatically opens when the unit is
turned on.
Off
You must press the OPEN button (12) to open the
TFT panel.
OSD Language English
German
Italian
The menus are displayed in English, German and
Italian
Clock
See “Adjusting the clock” to learn how to set the
clock.
BACK
(HH:MM)
Return to previous menu.
29
Adjusting the Clock
1. Access the “Clock” setting under the General Setup menu.
2. Press the or II buttons (14, 22) on the remote control or the or buttons (6,
7) on the joystick to move the cursor to the “Hour” or “Min” position.
3. Press the or buttons (17, 19) on the remote control or the or buttons (8,
9) on the joystick to adjust the hour or minutes.
4. Press the II button (14) on the remote control to confirm setup.
Returning to the System Setup Menu
To return to the System Setup menu, move to BACK, then press the /II button (18) on
the remote control.
ASP (Audio Sound Processing) Config Menu
The ASP Config Menu allows you to make fine audio adjustments.
Accessing the ASP Config Menu
To access the “ASP CONFIG” Menu from the “SYSTEM SETUP” menu, press the direction buttons on the joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to
highlight “ASP CONFIG” in green. Press the /II button (18) on the remote control to
enter the “ASP CONFIG” menu. A menu appears with the option for the first item, “Bass
Center Freq”, highlighted in light blue.
30
Adjusting a Feature
1. Enter the option field for the feature you want to adjust by pressing the /II button
(18) on the remote or by pressing the ENTER (joystick) button (5) on the unit.
A submenu appears in a second row with the selected option highlighted in light blue.
2. Select a new value by pressing the or IIbuttons (14, 22) on the remote control
or the or buttons (6, 7) on the joystick.
3. Confirm your selection by pressing the II, or buttons (14, 17, 19) on the remote control, or the or button (8, 9) on the joystick. The new value is highlighted in
light blue and setup is complete.
SUBJECT TO TECHNICAL CHANGE
31
Table 7: ASP Config Menu Features
Setting
Options Function
Bass Center
Freq
60Hz
80 Hz
According to the audio source, select the Bass Center
Frequency to achieve the best Bass effect.
100Hz
130Hz
150Hz
200Hz
According to the audio source, select the Bass Center
Treble Center 10KHz
Freq
12.5KHz Frequency to achieve the best Treble effect.
15KHz
17KHz
Sub.W Filter
80Hz
120Hz
160Hz
Sub.W Phase OD
180D
Selecting a crossover frequency sets a cut-off frequency
of the subwoofer´s LPF (low-pass filter) and the “SMALL”
speakers`HPF (high-pass filter). The Crossover frequency
setting has no effect if the subwoofer is set to “OFF” and
any other speaker is set to “LARGE”.
Subwoofer output IN phase
Subwoofer output OUT OF phase
Note: Depending on your installation, reversing the subwoofer phase may increase Bass output.
Bass Q-Factor 1.0
1.25
1.5
When the Bass Center Frequency is selected, adjusting
the Bass Q-Factor alters the sharpness of the Bass output.
2.0
BACK
Return to previous menu.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the SYS SETUP button (31) on
the remote control or the DISP button (13) on the front panel.
32
MULTI-ZONE OPERATION
Independent sources can be played simultaneously on the VME9020TS. For example,
a video game console can be seen on the front screen while DVD video is available to
rear passengers.
NOTE: If DVD is selected as the front source and SD Card is selected
for the rear source, then both sources will switch to SD Card. If SD
Card is selected as the front source and DVD is selected for the rear
source, then both sources will switch to the DVD source. Since the multimedia processor is shared between optical and SD Card media, one
of the other can be selected but not both simultaneously.
Selecting a Source for the Front Zone
To access the FRONT ZONE SOURCE MENU, touch the TFT screen in the top left corner of the screen.
This menu allows you to select a source for the front zone.
SUBJECT TO TECHNICAL CHANGE
33
Selecting a Source for the Rear Zone
To access the rear zone SOURCE MENU, touch the top right corner of the screen, near
the Multi-ZONE icon.
Select the source to be directed to the rear Multi-ZONE RCA outputs.
NOTE: Optical media and an SD Card cannot be selected from the
Multi-ZONE Source Menu simultaneously.
NOTE: The AM/FM tuner graphics will change to a "blue screen" background when any optical or SD Card media is selected from the MultiZONE menu. In addition, only the top left (Front Zone Source Menu)
and right (Multi-ZONE Source Menu) quadrants of the touch screen
are active during this mode of operation.
SUBJECT TO TECHNICAL CHANGE
34
TUNER OPERATION
Tuner TFT Display
1. Current Radio Band Indicator
2. Radio Frequency Indicator
3. Clock
4. Stereo Broadcasting Indicator
5. Strong Local Signal Broadcasting Indicator: Touch and hold to activate/deactivate
Local function
6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a station
7. Front Zone Playing Mode
8. Rear Zone Playing Mode
9. User Defined Equalizer Level
10. Loud Setting Indicator
11. Current Preset Station Indicator
12. : Touch to seek backward
13. : Touch to seek forward
14. : Touch to tune backward one step
15. : Touch to tune forward one step
16. BAND: Touch to change between AM/FM bands
17. AS: Touch to automatically store stations
18. Touch this area to return to the MAIN MENU
SUBJECT TO TECHNICAL CHANGE
35
Switch to Radio Tuner source
Press the TUNER button (10) on the front panel or the SRC button on the remote control (8) to switch to the TUNER source.
Select FM/AM Band
Touch the BAND button (16) on the screen, or press the TUNER button (10) on the
unit or the BAND button on the remote control (20) to change between the following
bands: FM1, FM2, FM3, AM1 and AM2.
Auto Tuning
Press and hold the button (19) on remote control or screen, or thebutton on the
joystick (9) to seek the next available radio station by increasing the tuning frequency.
Press the button again to stop searching.
Press and hold the button (17) on the remote control or screen, or the button on
the joystick (8) to seek the next available radio station by decreasing the tuning frequency. Press the button again to stop searching.
Manual Tuning
Press the or II buttons (14, 22) on the remote control or screen, or the or buttons (6, 7) on the joystick to increase or decrease the tuning frequency one step.
Press and hold the buttons to continuously tune until you release them.
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button (6) for three seconds. The preset number
appears at the top of the display.
36
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.
Auto Store (AS)
Automatic Storing of Preset Stations
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Touch AS (17) for 2 seconds to activate the Auto Store function.
The new stations replace stations already stored in that band.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a strong radio signal are played. To activate the Local function in AM/FM tuner mode, press and hold the
AUDIO/LOC again to turn Local off.
When the Local function is active, “LOC” appears on the screen and a green indicator
is illuminated.
RDS INFORMATION
Within the RDS Setup Menu (OSD) you will find the following setup possibilities.
OVERVIEW OF THE RDS FUNCTION
A) Notes:
- RDS is only available for FM receiption
- The PS function allows station names to be displayed in clear letters.
SUBJECT TO TECHNICAL CHANGE
37
- Network Tracking receiption uses the PI and AF codes. The PI code identifies the country, area and broadcast system. AF lists up which reception frequencies at the area are
broadcasting the same program and automatically changes to the best reception quality offering frequency without the need to interrupt the program by a seek function.
- Traffic programmes and announcements can be automatically received using the TA
features.
- The station name is displayed automatically when a RDS station is received.
B) AF (Alternative Frequencies / REG (Regional):
RDS AF Function
There are the following possible modes available:
- AF off: The network tracking is deactivated. Only station name will be displayed.
- AF on: Network tracking is activated. AF function changes between stations belonging
to the broadcast network being received.
(Can be adjusted within the RDS Setup menu)
Note: When this unit is set to this mode (REG OFF), a station broadcasting a different
regional program in the same network may be received at certain times. This can happen only in case of listening to regionalized programs; no malfunction!
- AF on / REG ON: Network tracking is activated. Regional mode is engaged (AF
function changes between stations broadcasting the same program at all times).
Regional mode shall be selected only in case of driving in certain local areas.
(Can be adjusted within the RDS Setup menu)
- RDS may not operate correctly in areas where no alternative station can be received.
- In reception borderland of a program chain normally no alternative stations can be
found. In this case also a high advanced RDS function cannot help anymore, another
program- of the driving area- must be selected.
- Especially in regional mode such reception borderland can be often reached. Because
of possible reduced reception quality, the regional function shall be used only for driving short distances.
38
- If the RDS station does not suport AF data list or if the tuner cannot read AF data from
receiption, no network tracking is possible. Switching to alternative frequencies does
not work.
After turning the RDS feature on, AF can be set to become “ON” or “OFF” using the
OSD menue.
- AF “OFF”: When the AF switching mode is set to OFF and RDS is set to “ON”, a maximum number of 6 RDS and non-RDS channels will be stored together.
- AF “ON”: When the AF switching mode is set to ON the RDS station information will
only be displayed.
- Illuminated AF Segment: When the AF switching mode is “ON”, the radio continually checks the AF signal strength. The interval of checking time of each AF depends on
the signal strength of current station which can be anywhere from a few seconds for
strong station to a few minutes for weak station. Every time a new AF is stronger than
a current station, the AF will switch over to the stronger station quickly.
- REG mode “ON”: When the Region mode is set to ON the AF switching is implemented to the station that has all PI codes that are same as the current station. “REG ON”
should be shown on screen. (Can be adjusted within the RDS Setup menu)
- REG mode “OFF”: When the regional mode is “OFF” the radio may switch from a
national program station to a local variant of that program, or from a local station in
an area to a local station in another area. This may cause customers to listen to a wrong
program. To avoid this feature set the Region mode to “ON”, and then the radio will
only switch to an AF that broadcasts Region mode to the same program. To switch the
REG function “ON”/”OFF” please push the right joystick for 2 seconds up (see page
10 button 6).
TA (Traffic Announcement) / TP (Traffic Program)
TP mode will automatically switch between “ON” and “OFF” depending upon the
broadcast. In order to access the TA mode. To switch the TA function “ON”/”OFF” please push the right joystick for 2 seconds down (see page 10 button 7). When the TA
mode is “ON” and a traffic announcement is received the following may occur:
1. The unit will switch from the different sources temporarily to radio mode.
2. The volume level will be raised to the threshold point.
3. When a TP station is received, the OSD will display “TA ON”.
TA Volume (traffic announcement volume increasement)
In the RDS Setup you can adjust between 0-7.
PTY
Within the PTY field will be displayed additional broadcaster information.
39
DVD PLAYER OPERATION
NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen
unless the parking brake is applied. If you attempt to play a DVD while the vehicle is
moving, the TFT screen displays “PARKING” with a blue background. Rear video
screens, if applicable, will operate normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the OPEN (2) button. The unit beeps and then
open.
Note: The unit includes security closing of the monitor after 30
seconds after ejecting a CD/DVD and no new CD/DVD is inserted!
Closing the TFT Screen
Press the OPEN (12) button again to close the TFT screen. If the screen is in the “IN”
position, it moves out before closing.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered disc play begins. If the screen is closed, the DVD indicator appears lit on the LCD screen.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized (see “RATING (Parental Lock) Menu” on page 57).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will not play unless the recording session is closed.
Ejecting a Disc
Press the button (22) on the unit or remote control (25) to eject the disc. The unit
automatically reverts to Tuner mode. You may eject a disc with the power off and the
unit remains off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs, press
and hold the button (22) on the unit or remote control (25) to reset the loading
mechanism. Normal operation resumes.
40
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the DVD button (18) on
the front panel or press the SRC button (8) on the remote control until DVD appears at
the bottom of the screen.
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
A – Return to MAIN MENU
B – DISP key: Displays playing information
C – Select previous chapter
D – Select next chapter
E – Display the following on-screen controls: Menu, /II, , , , , .
Controlling Playback
Stopping Playback
Touch the stop button () on the screen or press the /BAND button (20) on the
remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (/II) on the screen or press the/II button on the remote control (18) to suspend or resume disc play.
Slow Motion Playback
Press the IIbutton (22) on the remote control or the button (7) on the joystick to play
the current title in slow motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press /II
(18) to resume normal play. Continue pressing the II or button to slow reverse.
SUBJECT TO TECHNICAL CHANGE
41
Repeat Playback
Press the REPT button (7) on the remote control to alter repeat mode according to the
following:
• DVD: Repeat Title, Repeat Chapter, Repeat Off
• VCD (PBC Off): Repeat Single, Repeat Off
• MP3: Repeat Single, Repeat Folder, Repeat Off
NOTE: For VCD play, the repeat function is not available if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Press the REPT A-B button (6) on the remote control to set the start point (A) of the
repeated section.
• Press the REPT A-B button again once you reach the desired end point (B) of the
repeated section. The selected portion of the DVD will now repeat continuously.
• Press the REPT A-B button again to cancel the A-B section setting and stop repeat
play.
Random Playback
With a DVD, VCD, or CD playing, press the RDM button (33) on the remote control to
activate random playback and play all chapters/tracks in random order. “On” appears on the screen.
Press the button (19) on the remote control or the button on the joystick (9) to
play the next random track. Press the RDM button again to turn random play off.
NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off.
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the main DVD menu. Use
the directional (arrow) buttons (,, & ) on the joystick (16, 17, 18, 19) to select
a title from the menu.
Press the TITLE button (2) on the remote control to select a different title for playback.
42
Press the /II button (18) on the remote control or the ENTER (joystick) button (20) to
confirm your selection and begin playback.
Moving Through Chapters
Press the button (19) on the remote control or the button on the joystick (17) to
advance to the next chapter on the DVD.
Press the button (17) on the remote control or the button on the joystick (16) to
move to the previous chapter.
Fast Forward/Fast Reverse
Press the button (14) on the remote control or the button (6) on the joystick to fast
forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”,
“8X”, and “20X”. Continue pressing the or button to fast reverse.
Scanning
Press the SCN button (34) on the remote control to play the first ten seconds of each
chapter. Press SCN again to stop the scan function and play the current chapter.
Selecting 2-Channel and 6-Channel Audio Playback
2-Channel Audio (Down Mix) Support for CD, iPod, SD Card and DVD
Linear pulse code modulation (LPCM) and pulse code modulation (PCM) support is
available for CD, SD Card and DVD discs when 2-channel audio is selected.
6- Channel Audio Support for CD, SD Card and DVD
Surround I is available for decoding analog or digital 2-channel down mixed sources.
Surround II is available for decoding digital bit-stream sources.
NOTE: 2-Channel audio support is available for AM / FM tuner, TV
tuner and Auxiliary input only.
43
Table 8: Speaker Output options
Speaker Setup
Front
Spkr
Rear
Spkr
Center
Spkr
Subwoofer
2CH mode
Play 2CH audio in 6CH mode
with Surround “Off”
Play 2-channel (down mix)
audio in 6-channel mode with
Surround I “ON”
Play 6-channel audio in 6channel mode with surround
II “ON”
Goto Search
During DVD or VCD playback, perform the following steps to use the GOTO feature to
access a specific location on a disc:
1. Press the GOTO button (21) on remote control to enter “GO TO” mode.
2. Press the or II buttons (14, 22) on the remote control or the or buttons (8,
9) on the joystick to select a category (highlighted in blue).
• For DVD mode, you can choose Time or Title/Chapter search.
DVD Search
Time – Go to specific time in current title
Title/Chapter – Go to specific time in a chapter
• For VCD mode, press the GOTO button to choose between Track Search, Disc Search
and Exit.
SUBJECT TO TECHNICAL CHANGE
44
VCD Track Search
Time – Go to specific time in the current track
Track – Go to specific track
VCD Disc Search
Time – Go to specific time on disc
Track – Go to specific track
3. Enter a time into the field using the numeric keypad (29) on the remote control.
4. Press the /II button (18) on the remote control or the ENTER (joystick) button (5)
to go to the specified location on the disc.
5. Press the GOTO button again to exit.
Direct Chapter / Track Selection
During DVD, VCD and CD playback, you can use the numeric keypad on the remote
control (29) to access a track directly.
SUBJECT TO TECHNICAL CHANGE
45
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different angles.
For discs recorded with multiple angles, press the ANGLE button (13) on the remote
control to toggle available angles of the on-screen image.
Zooming
Press the ZOOM button (23) on the remote control to enlarge and pan through the
video image using the following options: “Q1”, “Q2”, “Q3”, and “OFF”.
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages, press the AUDIO button (5)
on the remote control to choose a language.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like
the subtitles to appear.
NOTE: During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo.
PBC (Play back Control) (VCD Only)
For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback. Press the MENU button (1) on the remote control to toggle the
PBC function “On”/”Off”. Once PBC is on, playback starts from track one of the play
list.
NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are
not available.
When PBC is activated, selecting random, scan, or search playback automatically
deactivates PBC.
46
Playback Information
During DVD and VCD playback, press the DISP button (10) on the remote control to
display playback information on the screen, including the media playing and current
playback time.
DVD Playback Information
The following information is displayed at the bottom of the screen during DVD playback:
• T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is currently playing.
• C : 2/16 – “2 / 16" indicates that the second of 16 titles on the DVD is currently
playing.
• 00:41:28 – “00:41:28” indicates the playback time of the current title.
•
2 / 6 Eng – The language display information indicates the second language out
of 6 (English) is currently being used.
The following information appears at the bottom of the screen during DVD playback:
• Front: DVD is the current playback source for the front zone.
• Rear: AUX IN is the current playback source for the rear zone.
"Surround II" is the selected playback audio encoding process.
"DSP" indicates Digital Signal Processing.
SUBJECT TO TECHNICAL CHANGE
47
VCD Playback Information
The following information is displayed on the screen during VCD playback:
• VCD2.0 – Format of current disc.
• T: 6/18 – “6/18” indicates the sixth of 18 tracks on the VCD is currently playing.
• 00:02:18 – “00:02:18” indicates the playback time of the current track.
The following information appears on the screen during VCD playback in 6-Channel
mode:
• Front: DVD – “DVD” is the current playing source for the front zone.
• Rear: AUX IN – “AUX IN” is the current playing source for the rear zone.
“MPEG” is the decoding method in use.
"Movie" indicates that movie effects are being applied to the audio sound track from
the VCD.
The following information appears on the screen during VCD playback in 2-Channel
mode:
•
•
•
•
Front: DVD – “DVD” is the current playing source for the front zone.
Rear: AUX IN – “AUX IN” is the current playing source for the rear zone.
EQ: FLAT – The equalizer setting is FLAT.
Loud: Level 1 – The Loud option is set to Level 1 loudness.
SUBJECT TO TECHNICAL CHANGE
48
General Disc Information
Table 9: Disc Properties
Symbol
12cm Disc Properties
Max Play Time
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (VCD)
(MPEG 1 Method)
74 minutes
Single side single layer
74 minutes
Tabel 10: Disc Symbols
Symbol
Meaning
Number of voice languages recorded. The number inside the
icon indicates the number languages on the disc (maximum of
8).
Number of subtitle languages available on the disc (maximum
of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box and “PS”
stands for Pan/Scan. In the example on the left, the 16:9
video can be converted to Letter Box video.
49
Tabel 10: Disc Symbols
Symbol
Meaning
Indicates the region code where the disc can be played.
• Region 1: USA, Canada, East Pacific Ocean Islands
• Region 2: Japan, Western Europe, Northern Europe, Egypt,
South Africa, Middle East
• Region 3: Taiwan, Hong Kong, South Korea, Thailand,
Indonesia, South-East Asia
• Region 4: Australia, New Zealand, Middle and South America,
South Pacific Ocean Islands/Oceania
• Region 5: Russia, Mongolia, India, Middle Asia, Eastern
Europe, North Korea, North Africa, North-West Asia
• Region 6: Mainland China
• ALL: All regions
Regional Coding:
Both the DVD-Player and discs are coded by region. These region
codes must match in order for the disc to play. If the codes do not
match, the disc won’t play. This unit’s code is 2. DVD’s with other
region codes cannot be played in this unit.
DVD SETUP MENU
In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO” “SURR SETUP”, “SURROUND FX”, and “RATING” (parental lock) are available for setup. This operation can
be performed using the remote control or joystick controls.
Accessing the DVD Setup Screen
Setup can be performed by pressing the dedicated button on the remote control or by
pressing the MENU/SRC button (11) on the front panel.
For system settings, press the DVD SETUP button (30) on the remote control or touch
“SETUP” on the screen to enter the “SETUP” menu. “SYS SETUP” is highlighted in green.
To access the “DVD SETUP” Menu, press the button (7) on the remote control to choose the “DVD SETUP” option, then press the /II button (18), or just touch “DVD SETUP”
on the screen. “LANGUAGE” is highlighted in green.
50
Note: Once the DVD setup is complete, the settings are memorized. To
return to the factory default settings, press the RESET button (25) on
the front panel.
Accessing a Menu
To access a menu (LANGUAGE, VIDEO, AUDIO, SURR SETUP, SURROUND FX, or
RATING), press the direction buttons on the joystick (6, 7, 8, 9) or remote control (14,
17, 18, 19, 22) to highlight the desired menu in green. You can also touch the onscreen menu selection to access that menu.
SUBJECT TO TECHNICAL CHANGE
51
Selecting a Feature for Adjustment
Once inside a menu, press the or IIbuttons (14, 22) on the remote control or the
or buttons (6, 7) on the joystick to select the feature to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust by pressing the /II button
(18) on the remote or by pressing the ENTER (joystick) button (5) on the unit. A submenu appears in a second row with the selected option highlighted in light blue.
2. Select a new value by pressing the or IIbuttons (14, 22) on the remote control
or the or buttons (6, 7) on the joystick.
3. Confirm your selection by pressing the II, , or buttons (14, 17, 19) on the
remote control, or the or button (8, 9) on the joystick. The new value is highlighted
in light blue and setup is complete.
LANGUAGE Menu
If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the
DVD, then the default language is used. During playback, press the SUBTITLE (9) or
AUDIO (5) button on the remote control to change the language directly. This will not
affect the DVD menu settings.
LANGUAGE Menu Features
Subtitle
English, Auto, Off: Select the default language in which you would like subtitles (if
applicable) to be displayed.
Audio
English: Select the default language in which you would like audio (when optional) to
be played.
DVD Menu
English: Select the default language in which you would like the DVD menu (if applicable) to be displayed.
BACK: Return to previous menu.
52
VIDEO Menu Features
TV Shape (Aspect Ratio)
4:3 PS: With 16:9 display, the left and right sides are cut off.
4:3 LB: With 16:9 display, the top and bottom are cut off.
16:9: Image is presented in wide view with a 16:9 aspect ratio.
Angle Mark
On: Angle indicator (if applicable) is shown.
Off: Angle indicator is not shown.
View Mode
Fill
Original
H Fit
W Fit
Fit to Scrn
Pan Scan
BACK: Return to previous menu.
NOTE: For standard discs not formatted for “widescreen”, use of the
16:9 aspect ratio will result in image distortion.
AUDIO Menu
The VME9020TS has a built-in Pink Noise generator to help set the relative speaker
levels for multi-channel audio playback.
AUDIO Menu Features
Pink Noise
Off: Stop output of pink noise
Left: Left channel pink noise
Center: Center channel pink noise
Right: Right channel pink noise
Left Surr: Left surround channel pink noise
53
Right Surr: Right surround channel pink noise
Subwoofer: Subwoofer pink noise
DRC
Off/On: Employ the Dynamic Range Control for better playback for low volumes.
CNTR CTRL
5ms/4ms/3ms/2ms/1ms/0ms: Adjust the time difference between the center
and front speakers to create a time delay between 1 and 5 milliseconds, producing a
more accurate audio effect.
REAR CTRL
15ms/12ms/9ms/6ms/3ms/0ms: Adjust the time difference between the rear
and front speakers to create a time delay between 3 and 15 milliseconds, producing a
more accurate audio effect.
Down Sampling
Off: Normal Output
On: Audio signal output at 48kHz
BACK: Return to previous menu.
NOTE: When Down Sampling is ON, the audio output signal will be
converted to 48kHz. When Down Sampling is OFF, the original sampling frequency is preserved.
54
SURR SETUP Menu
To change speaker settings for 2-channel mode, use the or II buttons (14, 22) on
the remote control or the or buttons (6, 7) on the joystick to select “DownMix”.
To change speaker settings for 6-channel mode, select “Full 6CH”. After selecting 2 or
6-channel mode, use the button (19) on remote control or thebutton on the joystick (17) to move to the speaker settings on the right.
Speaker Selection
Selecting LARGE for the multi-channel speaker option will give a full range output.
Selecting SMALL for the multichannel speaker option will activate a high pass filter
whose crossover is dependent upon the sub-woofer low pass filter frequency. For example, if the subwoofer low pass filter is set to 80Hz, then the high pass SMALL speaker
crossover will be 90Hz.
Low pass
80Hz
120Hz
160Hz
High pass
90Hz
135Hz
180Hz
Refer to page 56 when selecting speaker options for each mode.
SUBJECT TO TECHNICAL CHANGE
55
SURR SETUP Menu Features
FL (Front Left) / FR (Front Right)
Large: Use when front speakers have good bass output.
Small: Use when speakers do not have good bass output.
LR (Left Rear) / RR (Right Rear)
Large: Use when rear speakers have good bass output.
Small: Use when rear speakers do not have good bass output.
None: Use when rear speakers are not present.
SUB (Subwoofer)
Present: Use when subwoofer is present.
None: Use when subwoofer is not present
CTR (Center)
Large: Use when center speaker has good bass output.
Small: Use when center speaker does not have good bass output.
None: Use when center speaker is not present.
BACK: Return to previous menu.
SURROUND FX Menu Features
Decode Mode
Off: Play original audio format.
Surround I: Use Surround I decoding method.
Surround I Matrix: Play mono output with surround effect.
Surround I Movie: Enhance movie surround effects.
Surround I Music: Play surround music effects.
Panorama (Only available when Surround I Music Mode is activated.)
On: Extend the video from the front to the rear to achieve a better surround effect.
Off: Panorama is turned off.
56
Dimension Ctrl
0-6: Shift audio output between front and rear speakers.
Center Width Ctrl
0-6: Shift audio output between front and center channel speakers.
BACK: Return to previous menu.
NOTE: Surround I is recommended when the playback source is LPCM
(Linear Pulse Code Modulation) or 2-channel down mixed digital bitstream.
NOTE: When Surround I Music mode is selected, Dimension Control
and Center Width are available for fine tuning to achieve a more realistic surround sound processing.
RATING (Parental Lock) Menu
The DVD system has a built-in parental lock feature to prevent unauthorized persons
from viewing restricted disc content. By default, the rating system is unlocked. Once
setup, the parental lock is released only by entering the correct password. Once the
password is entered, rating is available for setup.
RATING Menu Features
Password: Enter a 4-digit password to activate the “Rating” feature. The default
password is 0000.
Rating
1. Kid Safe
2. G
3. PG
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult
Select the appropriate rating level for the intended audience.
You may override higher ratings by using your password.
57
Load Factory
Reset: Select “Reset” to restore the factory default settings for the Rating system only.
BACK: Return to previous menu.
To reset the password, access the “RATING” menu and enter the current password.
Once the correct password is entered, you can access the “Password” field and enter
a new one.
NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or
documentation. If the rating is not available on the disc, the parental
lock feature is unavailable. Some discs restrict only portions of the
disc and the appropriate content will play. For details, please refer to
the disc description.
CD/MP3/WMA OPERATION
Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast
Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3
operation.
Please see the DVD Player Operation section for information about these topics.
NOTE: CD-R and CD-RW will not play unless the recording session is
closed.
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3 characters
• ISO 9660 – file name: 31 characters, file extension: 3 characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file system standards, it may
not be displayed or played back correctly.
58
CD Player User Interface
The on-screen indicators and touch key areas for CD playback are outlined below.
1. Current track and total number of tracks on disc
2. Elapsed playing time
3. Touch to activate/deactivate Repeat play mode
4. Touch to activate/deactivate Scan mode
5. Touch to activate/deactivate Random mode
6. Current time
7. Disc Title
8. Track Title
9. Touch to return to MAIN MENU
10. /II: Touch to play/pause disc playback
11. : Touch to stop disc playback
12. : Touch to move to previous track
13. : Touch to move to next track
14. : Touch to rewind current track
15. : Touch to fast forward current track
16. Front Zone Playing Mode
17. Rear Zone Playing Mode
18. Encoding method of media being played
19. "Surround Music" effect selected
SUBJECT TO TECHNICAL CHANGE
59
MP3/WMA Discs
This player allows you to playback MP3 files recorded on CD-ROM, CD-R, and CDRW. For CD-RW discs, please make sure it is formatted using the full method and not
the quick method to prevent illegal disc operation.
Use the following settings when compressing audio data for your MP3 disc:
• Transfer Bit Rate: 320kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity, disable additional writing. For
recording on an empty disc up to maximum disc capacity, use the "Disc at once" setting.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory.
Use the numeric keypad (29) on the remote control to access files directly.
Selecting a Playback Mode
1. Press the /BAND button (20) on the remote control to stop disc play.
2. Press the button (19) on the remote control or the button on the joystick (9) to
enter playback mode (PLAY MOD).
3. Press the /II, , or buttons (18, 17, 19) on the remote control, or the or button (8, 9) on the joystick to choose from the following playback options:
60
MP3/WMA Playback Modes
Play Mode
Playback Details
Disc Normal
Playback all files on the disc and stop at the end.
Disc Repeat
Repeat playback of all files on the disc.
Random
Randomly play all files and stop at the end.
Single Track
Play a specific file and stop.
Repeat Track
Repeat playback of a specific file.
Folder Normal Play all files in a folder and stop at the end.
Folder Repeat
Repeat playback of all files in a folder/directory.
4. Press the button (14) on the remote control to confirm the playback mode then
press the /II button (18) to begin playback.
SD CARD READER OPERATION
Accessing SD Card Mode
To switch to SD card mode, press the SD button (19) on the front panel.
Using the Touch-Screen Controls
The touch keys for SD card playback are described below.
61
•
•
•
•
•
•
/: Play/Pause playback
: Stop playback
PAGE -: View previous page
PAGE +: View next page
DIR -: View previous directory
DIR +: View next directory
Controlling Playback
Stopping Playback
Touch the stop button () on the screen or press the /BAND button (20) on the
remote control to stop playback.
Pausing Playback
Touch the play/pause button (/II) on the screen, press the /II button on the remote control (18), or press the joystick button (5) on the front panel to suspend or resume
playback.
Repeat Playback
Press the REPT button (7) on the remote control or touch “Repeat” on the screen to alter
repeat mode according to the following: Repeat Single, Repeat Folder, Repeat Off
Random Playback
Press the RDM button (33) on the remote control or touch “Random” on the screen to
activate random playback and play all tracks in random order.
SUBJECT TO TECHNICAL CHANGE
62
Moving Through Chapters
Press the button (19) on the remote control or the button on the joystick (17) to
advance to the next chapter.
Press the button (17) on the remote control or the button on the joystick (16) to
move to the previous chapter.
Change Directory
Touch the ( [DIR+] / [DIR-] ) key on the screen to navigate through the Directories /
Folders
Previous/Next Page
Touch the ( [PAGE+] / [PAGE-] ) key on the screen to navigate through Pages / Files.
Direct Chapter / Track Selection
During DVD, VCD and CD playback, you can
use the numeric keypad on the remote control (29)
to access a track directly.
NOTE: Media (SD Card / CD-R / DVD) with a ROOT directory containing only music, movie or JPEG files may cause the RANDOM / REPEAT function to work incorrectly. To ensure the proper playback of
music, movie, and JPEG files, place all media files inside folders on
the data storage media.
SUBJECT TO TECHNICAL CHANGE
63
iPod OPERATION
Accessing iPod Mode
The unit will automatically switch to iPod mode when an iPod is plugged into the media
module. To return to the iPod menu from any other source menu, press the SRC button
(15 ) on the front panel or remote control (8) until the iPod menu appears on the screen.
picture 1
Controlling your iPod by touch screen
The left upper corner brings you back to the source selection menu. If you touch the corresponding areas at the touch screen you gain access to the corresponding functions.
(see picture 1)
Controlling your iPod
The following remote control buttons are used to access the iPod menus:
TITLE = Music
MENU = Photos
AUDIO = Videos
Use the joystick on the unit or the directional keys on the remote control to navigate the
iPod menus.
SUBJECT TO TECHNICAL CHANGE
64
Music Playback
Press the button (19) on remote control, or the button on the joystick (9) to move
to the next item on the menu.
Press the button (17) on the remote control, or the button on the joystick (8) to
move to the previous item on the menu.
Press the /II button (18) on the remote control or the joystick ENTER button (20) on
the head unit to select the highlighted menu option.
Press the button (14) on the remote control or the button (6) on the joystick to
return to the previous menu.
Video Playback
While iPod video can be viewed on the screen, you must use the iPod to control video
playback options.
Press the AUDIO button (5) on the remote control to access the iPod VIDEO mode. The
Moniceiver will release control back to the iPod so you can select video media to be
displayed on the TFT monitor. To exit VIDEO mode, press the button (14) on the
remote control or MENU button on the iPod.
NOTE: To transmit the video from your iPod to the screen, you must
set the following options through the iPod video settings menu: TV
Out = On, TV Signal = PAL, and Widescreen = On
Photo Playback
While iPod photos can be viewed on the screen, you must use the iPod to control photo
playback options.
Press the MENU button (1) on the remote control to access the iPod PHOTO mode. The
Moniceiver will release control back to the iPod so you can select video media to be
displayed on the TFT monitor. To exit PHOTO mode, press the button (14) on the
remote control or MENU button on the iPod.
NOTE: After disconnecting your iPod, the Moniceiver will always
return to last mode accessed when your iPod is plugged back into the
unit.
65
Fast Forward/Fast Reverse
To fast forward or fast reverse, press and hold the or buttons (17, 19) for 1
second and continue to hold. Release to resume normal play.
Search Playlist/Artist/Album/Song
To search through Playlists, Artists, Albums and Songs, press the 1 button (29) on the
remote control while in one of the following directories: Playlist, Artist, Album or Song.
The selected directory will be accessed with the number of pages and files in that directory displayed at the top of the page. To access the page or file, enter the page or file
number directly from the remote control keypad. Press the or button (17, 19) on
the remote control or the or button (8, 9) on the joystick to select the desired song
or track.
66
TV TUNER OPERATION
Accessing TV Mode
To switch to TV mode, press the TV button (16) on the front panel or press the SRC button (8) on the remote control until TV appears at the bottom of the screen.
NOTE: Touch the top left corner to access the MAIN MENU Multi-ZONE
SETUP menu and the top right corner to access the Multi-ZONE menu
(rear zone setup).
Auto Tuning
Press the button (19) on remote control, or the button on the joystick (9) to seek
the next available TV station by increasing the tuning frequency.
Press the button (17) on the remote control, or the button on the joystick (8) to
seek the next available TV station by decreasing the tuning frequency.
Press the /BAND, , , or button to stop searching.
Once a TV station is searched, the auto seeking stops and the TV station is played. If
no station is searched, the tuning stops at the first channel after performing a round
search.
Manual Tuning
Press and hold the or buttons (8, 9) on the joystick to increase or decrease the TV
frequency one step.
Storing Stations (AS)
Automatic Preset Memory
To select the strong stations in the current TV frequency range, press and hold the joystick button (5) to activate the Auto Store function. The new stations replace stations
already stored. Press the joystick button again or press the /BAND button (20) on
the remote control to stop searching.
67
Using Preset Scan
To scan stored stations:
1. Press the joystick button (5) to scan all stored TV stations. The unit pauses for 10
seconds at each station.
2. Press the joystick button again or press the /BAND button (20) on the remote control to stop scanning and play the current station.
Selecting a TV Station
To browse through stored stations:
• Press the button (15) on the remote control or the button (6) on the joystick or
to tune the previous stored station.
• Press the IIbutton (22) on the remote control, or the button (7) on the joystick
to tune the next stored station.
Direct Channel Selection
Use the numeric keypad on the remote control (29) to enter a
specific TV station.
Display Current Channel
Press the DISP button (10) on the remote control to display
information regarding the current TV station.
SUBJECT TO TECHNICAL CHANGE
68
TROUBLESHOOTING
GENERAL
Problem
Cause
Corrective Action
Unit will not power
on
- Radio Fuse blown
- Car battery fuse blown
- Illegal operation
- Install new fuse with correct rating
- Install new fuse with correct rating
- Press the RESET button located in the
bottom right corner of the front panel
Remote control does
not function
- Battery depleted
- Battery installed incorrectly
- Replace battery with new one
- Remove battery and install correctly
No/low audio output - Improver audio output
- Check wiring and correct
connection
- Volume set too low
- Increase volume level
- Improver “MUTE” connection - Review wiring diagram and check
“MUTE” connection
- Speakers damaged
- Replace speakers
- Heavily biased volume balan- - Adjust the channel balance to the
ce
center position
- Speaker wirings is in contact - Insulate all speaker wiring connectiwith metal part of car
ons
Poor sound quality or - Pirated disc in use
distortion
- Speaker power rating not
compatible with unit
- Speaker is shorted
- Use original copy
- Connect proper speakers
Tel-Mute malfunction
- Check that “MUTE” connection is not
grounded and that it´s properly insulated
- “MUTE” wire is grounded
- Check speaker contact
Unit resets itself when - Incorrect connection between - Check wiring and correct
engine is off
ACC and positive battery wire
69
TFT MONITOR
Monitor does not open
automatically
- TFT Auto Open is turned off
- Turn TFT Auto Open on
No image
- Incorrect connection to par- - Check wiring and correct
king brake wire
- PRK SW is activated and
- Stop vehicle in safe place
parking brake is not engaged and apply parking brake
Flashing image or inter- - DVD is not compatible with
ference appears on
current TV system settings
screen
- Improper video signal connections
- Change setup to accommodate disc
- Check wiring and correct
Prolonged image or
improper height/width
ratio display
- Improper aspect ratio setup
- Use correct aspect ratio setting
Monitor stops at incorrect position
- Moving path is blocked
- Press OPEN key to restart
monitor movement
TUNER
Weak station searching - Auto antenna is not fully
extended
- Auto antenna is not properly
connected
- LOCAL function is activated
- Connect the auto antenna
control cable property
- Connect the auto antenna
control cable property
- Turn LOCAL function off
Cannot insert disc
- Eject current disc and insert
new one
- Disc already inside unit
70
Problem
Cause
Corrective Action
Disc does not play back - Disc is warped or scratched
- Disc is dirty or wet
- Laser pickup is dirty
- Use disc in good condition
- Clean disc with soft cloth
- Clean laser pickup with
cleaning disc
- Incompatible disc is used
- Use compatible disc
- Disc rating exceeds Parental
- Change Parental Lock settings
Lock rating limit
to lower restriction
- Disc region code is not compati- - Use disc with proper region
ble with unit
code
- Disc is inserted upside down
- Insert disc with label side up
Image blurred, distorted, or dark
- Disc is illegally copied
PBC cannot be used
during VCD playback
- PCB is not available on the disc
No repeat or searching - PCB is on
while playing VCD
- Use original disc
- Turn PCB off
MP3
Interruption occurred
during playback
- Disc is dirty or scratched
- File is damaged/bad recording
Incorrect playback mes- - Message is longer than LCD can
sage displayed
display
71
- Clean disc or replace
- Recreate disc with good files
Error Message
Message
Displayed
Cause
Corrective Action
Loading
- Disc is being read
No Disc
- Disc is dirty
- Disc is upside down
- Disc not present in loading
compartment
- Clean disc with soft cloth
- Insert disc with label side up
- Insert disc
Bad Disc
- Disc is dirty
- Disc is upside down
- Clean disc with soft cloth
- Insert disc with label side up
Unknown disc
- Disc format is not compatible
with this unit
Region Error
- DVD is not compatible with
region code of unit
Error
- illegal mechanism operation
- Press EJECT key for 5 seconds to
reset loading mechanism
Care and Maintenance
1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching
or discoloration.
2. Do not get water or cleaning fluids on the unit.
3. If the temperature inside the player gets too hot, a protective circuit automatically
stops play of the disc. If this occurs, allow the unit to cool before operating the player
again.
4. Never insert anything other than a 5” (12 cm) compact disc into the player as the
mechanism can be damaged by foreign objects.
5. Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without
an adaptor, as damage to the player and/or disc may occur. Such damage is not
covered by the Warranty on this product.
6. The CD player may not operate properly in extreme hot or cold. If such conditions
occur, allow the interior of the vehicle to reach a normal temperature before using player.
72
7. When the vehicle warms up during cold weather or under damp conditions, condensation may
appear on the LCD panel. Should this occur, the screen will not operate properly until the moisture has evaporated.
8. We suggest you use a cleaning disc in this unit more frequently than in the unit in your home
due to the environmental conditions of the vehicle.
SPECIFICATIONS
CEA Power Ratings
Main Amplifier
Power Output: 18 watts RMS X 4 channels into 4-ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms)
Dynamic Power: 88 watts into 4-ohms, all channels driven
Frequency Response: 20Hz to 20kHz, -3dB. Aux input used as source reference
Reference Supply Voltage: 14.4VDC
Center Amplifier
Power Output: 22 watts RMS X 1 channels into 4-ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms)
Dynamic Power: 25 watts into 4-ohms, all channels driven
Frequency Response: 20Hz to 20kHz, -3dB
Reference Supply Voltage: 14.4VDC
DVD/CD Player
Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA,
MP3, WMA, HDCD, SVCD, VCD, MPEG, JPEG, MP3/WMA files burned onto a
DVD+R/W or DVD-R/W and Kodak Picture CD
Signal to Noise Ratio: 95dBA
Dynamic Range: >95dB
Frequency Response: 20Hz to 20kHz, -3dB
Channel Separation: > 60dB @ 1kHz
SUBJECT TO TECHNICAL CHANGE
73
D/A Converter(s): 6-channel high performance 24-bit, 192kHz, multi-bit Sigma Delta
modulation. DAC supports sample rates from 8~192kHz.
Electronic Skip Protection (ESP): 16Mbit high-speed flash memory
DVD: 2-3 sec, CD-DA: 10 sec, MP3: 100 sec, WMA: 200 sec (ESP time is approximate)
Video
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM RDS Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1kHz: 58dB
Image Rejection: 80dB
Stereo Separation @ 1kHz: 30dB
Frequency Response: 30Hz - 15kHz, -3dB
AM Tuner
Tuning Range: 530kHz - 1710kHz
Sensitivity (-20dB): 30uV
Signal to Noise Ratio @ 1kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2kHz, -3dB
SUBJECT TO TECHNICAL CHANGE
74
Monitor
Screen Size: • 6.5" (Measured diagonally), 16:9 Widescreen
• 6.1" (155 mm) W X 3.51" (89.2 mm) H
Screen Type: TFT Liquid Crystal Display (LCD), active matrix
Brightness: 400 cd/m2
Contrast Ratio: 350
Response Time: 15mSec rise time, 50mSec fall time
Resolution:
• 280,800 sub pixels, 1200 (W) X 234 (H)
Viewing angle:
• 65 degrees left or right
• 40 degrees up
• 65 degrees down
Anti-glare screen
General
Auxiliary Input impedance: 10k
Power Supply: 11 to 16VDC, negative ground
Fuse: 10-amp, mini ATM type
Double-DIN chassis dimensions: 7" X 7" X 4" (178mm x 178mm x 100mm)
SUBJECT TO TECHNICAL CHANGE
75
D
Wir gratulieren Ihnen! Durch Ihre kluge Wahl sind Sie Besitzer eines Audiovox Mobile Video-Produktes geworden. Audiovox Mobile Video-Produkte erfreuen sich aufgrund der hohen Qualität eines ausgezeichneten Rufes weltweit. Dieser hohe Qualitätsstandard ermöglicht es für Audiovox Mobile Video-Produkte 2 Jahre Garantie zu gewähren.
Die Produkte werden während des gesamten Fertigungsvorganges laufend kontrolliert und geprüft. Im Servicefall beachten Sie bitte folgendes:
1. Die 2-jährige Garantiezeit beginnt mit dem Kauf des Produktes und gilt nur für den Erstbesitzer.
2. Während der Garantiezeit beseitigen wir etwaige Mängel, die nachweislich auf Material- oder Fabrikationsfehler beruhen, nach
unserer Wahl durch Austausch oder Nachbesserung der defekten Teile. Weitergehende Ansprüche, insbesondere auf Minderung,
Wandlung, Schadenersatz oder Folgeschäden sind ausgeschlossen. Die Garantiezeit wird von einer Garantieleistung durch uns nicht berührt.
3. Am Produkt dürfen keine unsachgemäßen Eingriffe vorgenommen worden sein.
4. Bei Inanspruchnahme der Garantie wenden Sie sich bitte zunächst an Ihren Fachhändler. Sollte es sich als notwendig erweisen,
das Produkt an uns einzuschicken, so sorgen Sie bitte dafür, daß • das Produkt in einwandfreier Originalverpackung verschickt wird,
• die Kontrollkarte ausgefüllt dem Produkt beiliegt, • die Kaufquittung beigefügt ist.
5. Von der Garantie ausgenommen sind: • Leuchtmittel • Verschleißteile • Transportschäden, sichtbar oder unsichtbar (Reklamationen für solche Schäden müssen umgehend bei der Transportfirma, Bahn oder Post eingereicht werden.) • Kratzer in Metallteilen, Frontabdeckungen u.s.w.
(Diese Defekte müssen innerhalb von 5 Tagen nach Kauf direkt bei Ihrem Händler reklamiert werden.) • Fehler, die durch fehlerhafte Aufstellung, falschen Anschluß, unsachgemäße Bedienung (siehe Bedienungsanleitung), Beanspruchung oder äußere gewaltsame Einwirkung entstanden sind. • Unsachgemäß reparierte oder geänderte Geräte, die von anderer Seite als von uns geöffnet wurden. • Folgeschäden an fremden
Geräten • Kostenerstattung bei Schadensbehebung durch Dritte ohne unser vorheriges Einverständnis • Batterien und Akkus.
GB
Congratulations! You have made a wise selection in becoming the owner of a Audiovox Mobile Video equipment. Due to high
quality Audiovox products have earned an excellent reputation through the western world. And this high quality standard enables us to grant
a 2-years warranty for Audiovox Mobile Video products.
The equipments are checked and tested continously during the entire production process. In case you have problems with your
Audiovox Mobile Video equipment, kindly observe the following:
1. The 2-years guarantee period commences with the purchase of the component and is applicable only to the original owner.
2. During the guarantee period we will rectify any defects due to faulty material or workmanship by replacing or repairing the defective part at
our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or
subsequential damages, are excluded. The guarantee period is not altered by the fact that we have carried out guarantee work.
3. Unauthorized tampering with the equipment will invalidate this guarantee.
4. Consult your authorized dealer first, if guarantee service is needed. Should it prove necessary to return the component to the factory, please insure that • the component is packed in original factory packing in good condition • the quality control card has been filled out and enclosed with the component, • your enclose your receipt as proof of purchase.
5. Excluded from the guarantee are: • Illuminates • Wear parts • Shipping damages, either readily apparent or concealed (claims for such damages must be lodged immediately with forwarding agent, the railway express office or post office). • Scratches in cases, metal components,
front panels, etc. (You must notify your dealer directly of such defects within three days of purchase.) • Defects caused by incorrect installation or connection, by operation errors (see operating instructions), by overloading or by external force. • Equipments which have beenrepaired
incorrectly or modified or where the case has been opened by persons other than us. • Consoquential damages to other equipments. • Reimbursement of cools, without our prior consent, when repairing damages by third parties • batteries and battery packs.
F
Toutes nos félicitations! Vouz avez bien choisi et êtes le propriétaire heureux d’un produit Audiovox. Les produits Audiovox ont
une excellente réputation pour leur bonne qualité. Pour cette raison, nous accordons 2 ans de garantie sur tous les produits Audiovox.
Les appareils sont soumis pendant toutes les opérations de fabrications à des contrôles et vérifications constants. Si, pourtant, vous
rencontrez des difficulés avec votre appareil Audiovox veuillez tenir compte de ce qui suit:
1. La garantie débute avec l’achat de l’appareil et est valable uniquement pour le premier propriétaire.
2. Pendant la période de garantie nous réparons les dommages provenant des défauts de matériel ou de fabrication et nous procédons, à
notre guise, à l’échange ou à la réparation des pièces défectueuses.
3. Aucune réparation impropre ne doit avoir été effectuée à l’appareil.
4. Lors d’une demande de garantie, veuillez vous adresser en premier lieu à votre distributeur. Si ce dernier décide que l’appareil doit nous être
retourné, veuillez tenir compte que: • l’appareil soit expédié dans son ermballage d’origine, • la carte de contrôle dûment remplie soit jointe, •
le bon d’achat soit joint.
5. Ne sont pas compris dans la garantie: • Matériel d’éclairage • Pièces d’usure • Avaries de transport, visibles ou non (de telles réclamations doivent être faites immédiatement auprès du transporteur, du chermin de fer ou de la poste). • Des rayures sur le boîtier, pièces métalliques, couvercles etc. (ces dommages doivent être signalés directement à votre distributeur dans les trois jours suivant l’achat). • Dommages
résultant d’un raccordement incorrect, maniement incorrect (voir instructions de service), surcharge ou application de force extérieure. • Appareils réparés non conformément ou modifiés et qui ont été ouverts par une personne autre que nous. • Dommages ultérieurs à d’autres appareils. • Remboursement des frais à des tiers ayant effectué les réparations sans notre accord préalable • Accus et batteries.
G ARANTIEKARTE
WARRANTY C ARD
Typ/ Type
Serien-Nr./Serial-No.
Name und Anschrift des Händlers /Stempel
Name and address of the dealer/stamp
Käufer/Customer
Name/Name
Straße/Street
PLZ, Ort /City
Land /Country
Kaufdatum / buying date
Nur gültig in Verbindung mit Ihrer Kaufquittung!
No warranty without receipt!
Audiovox Audio Produkte GmbH
Lise-Meitner-Str. 9 · 50259 Pulheim
Tel.: +49 2234/807-0 · Fax: + 49 2234/807-399
www.audiovox-germany.de