Delphi SKYFi3 Kit for Bose System User guide

SKYFi3® Kit for Bose® System
VERSION 1.0
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
The SKYFi3 Satellite Radio Receiver incorporates an FM transmitter
and is therefore classified as an intentional transmitter. Changes or
modifications to the unit not expressly approved by Delphi can void
your authority to operate this equipment.
Warning: The FCC and FAA have not certified the Delphi SKYFi3
Satellite Radio Receiver for use in any aircraft (neither portable nor
permanent installation). Therefore, Delphi cannot support this type
of application or installation.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
Need help?
Call us at 1.877.GO.DELPHI
Monday through Friday from 8:00 a.m. - 8:00 p.m. Eastern Time
Saturday and Sunday from 10:00 a.m. - 4 :00 p.m Eastern Time
Note: Extended seasonal hours may be available.
Thank you for purchasing a Delphi SKYFi3® Kit for your Bose® System.
We’ve designed many thoughtful features into this system to ensure that
your level of listening enjoyment is the very best it can be.
In the event that you have questions or trouble getting started with your
new system, please do not return to the store. Call us first! We can help.
Please install the latest software update. You may also refer to the “Software
Update” insert and the “Troubleshooting” section of the enclosed SKYFi3
user guide for more information.
Technical Support is also available at www.shopdelphi.com/skyfi3 support.
All features and functions are subject to change without notice.
To ensure you have the latest features and satellite service compatibility,
please visit http://fwupdt.xmradio.com/ to check for any updates for the
product. Delphi recommends that you check for any updates before using
the SKYFi3. You will need the Radio ID of your SKYFi3. You can find this
number on the bottom of the receiver and on the box.
Go to http://fwupdt.xmradio.ca
Table of Contents
Contents
Welcome.............................................................................................. 3
About Delphi....................................................................................... 4
About XM............................................................................................ 4
Some Important Reminders.............................................................. 5
Controls............................................................................................... 6
Connecting the Parts.......................................................................... 7
When Using Bose Wave Radio/CD................................................. 8
When Using Bose System With Multi-CD Changer...................... 9
Receiving the XM Signal.................................................................. 10
Activating Your SKYFi3.................................................................... 12
Using the Remote Control............................................................... 13
Using the Remote Control to Turn on Your System................... 14
When There’s No Signal on the SKYFi3 Screen......................... 14
To Get Out of XM Mode ............................................................... 15
Bose System Universal Remote Control Buttons....................... 17
Delphi SKYFi3 Universal Remote Control Buttons..................... 18
Other Things to Know About the Remote Control..................... 19
Troubleshooting................................................................................ 20
Care.................................................................................................... 21
Warranty............................................................................................ 22
Welcome
Welcome
Thank you for purchasing the new Delphi SKYFi3® Kit for your
Bose® System. You are just minutes away from adding more than
170 channels of live XM® satellite radio to your existing system.
To transform your Bose System into a satellite radio receiver, just
follow the instructions found in this manual.
About Delphi
Delphi is a world leader in mobile electronics, vehicle components,
and audio technology. Delphi created the first in-dash car radio in
1936 and continues its strong tradition of innovation in the audio
industry. Now Delphi technology has helped make satellite radio a
reality, and Delphi continues to expand its in-vehicle and consumer
electronics technologies. With its exciting line of satellite radio products, Delphi offers a broad portfolio of products to answer a wide
variety of information and entertainment needs—in the vehicle,
home, office, or virtually anywhere.
About XM
XM Satellite Radio is the nation’s leading provider of satellite
radio*. XM broadcasts over 170 digital channels of totally new
music, news, sports, and children’s programming direct to cars
and homes via satellite and its extensive repeater network, which
supplements the satellite signal to ensure seamless transmission. Subscribers pay a monthly fee for the XM service. Exclusive
programming on XM includes Major League Baseball® games for
every team, all season long. XM is broadcast via satellite from
coast to coast, so you can listen to XM continuously as you travel
across the country.
*To receive the XM service, you must subscribe to XM. Available in the continental United States and Canada
only. Satellite radio reception depends on the ability of the antenna to receive a signal. The signal may not be
available in buildings or if obstructed (e.g., by mountains, trees, bridges, etc.).
Some Important Reminders
Some Important Reminders
We know you are eager to begin using your SKYFi3 Kit for Bose
System. Please take a moment to review the following:
Warning: This manual and the SKYFi3
user guide contain important safety and operating information. Please read, understand,
and follow the instructions in these manuals.
Failure to do so could result in personal injury,
death, and/or damage to your SKYFi3, accessories, and/or property.
Caution: Use your SKYFi3 only with the
enclosed components or approved accessories.
Do not modify wires or other connectors in any
way; you could cause a malfunction, which
could damage your SKYFi3 and will void your
warranty.
Caution: Refrain from using food or
drinks near your SKYFi3. Spilling food or drinks
on the unit can damage it.
This product’s software can be updated and all features and functions are subject to change without notice. Please check for online
updates for your SKYFi3. See page 1 for more information.
SKYFi3 uses a microSD™ card (sold separately) to store digital audio files. Delphi recommends using SanDisk brand microSD cards
for the best performance. SKYFi3 accepts microSD cards up to 2 GB
in capacity.
Please make sure your battery is fully charged (three hours) before
using your SKYFi3 on battery power.
Controls
Controls
See the enclosed SKYFi3 user guide for more information on
how to enjoy all of the features of your SKYFi3.
Earbud
Jack
microSD
Slot
Display
Volume
Arrow Keys
Select menu entries,
change channels, skip
through songs, change
categories, and more...
Play/Pause
Mode/Power
Hold
Slide the switch down
to lock controls.
Press to change modes:
Live XM, My Music, Aux.
Press and hold to power
on and off.
Menu
Display the main
menu of functions:
Record, Favorites,
Bookmarks, Settings, My Music.
Display
Press to change the
display appearance.
Press and hold to
change from vertical
to horizontal
Power
orientation.
USB Connector
Connect SKYFi3 to
your PC.
Main Connector
For connecting SKYFi3 to car, home
cradles, and additional accessories.
Connecting the Parts
Connecting the Parts
Connect the parts for the Delphi SKYFi3 Kit for Bose System as
shown in the picture below.
AUX IN
Bose System setup—
see page 8 & 9 if using a Bose Wave
Radio/CD or Multi-CD changer
Connecting the Parts
When Using Bose Wave Radio/CD
If you are using a Bose Wave Radio/CD, please use the included
RCA adapter to plug in as shown in the figure below.
2
1
AUX IN
When Using Bose System With Multi-CD Changer
If you are using the Bose System with Multi-CD Changer, please
use the included RCA adapter to plug in as shown in the figure
below.
Note: If you are unsure which
Bose System you own, the model
number can be found on the bottom of your Bose System. Also,
be sure to change the switch
inside the battery cover on the
remote control to the Bose/CD
position.
1
2
AUX IN
Receiving the XM Signal
Receiving the XM Signal
1. Plug in the Delphi power adapter and turn on your SKYFi3 by
holding down the Mode/Power button.
2. Turn on your Bose System and listen to the radio or CD at a
volume level that is low enough to be heard, but is very low. We
recommend setting the volume level to 30 while setting up your SKYFi3.
3. With your SKYFi3 on, press the XM button on the included uni-
versal remote. (Be sure to insert the batteries into the remote. If
you are using a Bose Wave Radio/CD, you will also need to move the switch inside the battery cover of the remote control to the Bose/CD position.) Your Bose System will show AUX or AUX 1
on the display.
4. You should be able to hear channel 1, the XM Preview Channel.
If you do not, and the Delphi screen displays “NO SIGNAL,” try rotating your XM antenna or moving it to another location. Make sure
the antenna points south or southwest. See diagram below.
You may need to unwind your antenna and
place it outside in direct view of the South or
Southwest sky. For your convenience, your
XM antenna has been pre-installed on the hub.
10
If the “NO SIGNAL” message persists, you can use SKYFi3’s antenna
aiming feature. Press the Menu button and use the arrow buttons and Play/Pause to select “Settings,” “Setup,” and “Antenna
Aiming.” Slowly turn and tilt the antenna, pausing in between for
approximately five seconds to allow the signal to be received. The
signal bars on the display shown below will change accordingly.
Find the position that shows at least four bars on either “satellite”
or “terrestrial.”
In many areas in the United States, it may be
possible to receive a terrestrial signal indoors
without having the antenna outside or having
to go through a window. If you do not have a
good terrestrial signal, you must aim the unit
to face the sky in a south/southwest direction
to get a signal. The antenna is weatherproof
and may be mounted outside.
If you need more cable length, you can remove the antenna from
its base and unwind the antenna cable from the hub to the desired length. You can also purchase a 50' antenna extension cable
(SA10006) from www.shopdelphi.com.
For indoor use with low signal, we recommend purchasing the
Delphi Signal Repeater (SA10116-11P1). It allows you to use your
SKYFi3 indoors, regardless of the XM signal strength, just about
anywhere in your house or office.
11
Activating Your SKYFi3
The antenna aiming screen will remain as long as it is needed to
help you position the antenna. When you have found the best position, press the left arrow button repeatedly to exit the “Settings”
menu.
Activating Your SKYFi3
1. Set up your player, home cradle, and antenna as described in
“Connecting the Parts” on page 7.
2. Turn the unit on and press the Mode button until the screen says
“Live XM” mode.
3. Use the arrow buttons to find channel 0, then push the Play/
Pause button to choose it. You should see an 8-character XM
Radio ID on the display (the XM Radio ID should also be on the
bottom of your SKYFi3 and on the package).
4. Write the XM Radio ID here:
Note: Please check your ID code carefully. There is no “I” (eye), “o” (oh), “S” or “F” used.
You may wish to double-check your ID code on the outside of your tuner box.
5. Activate your XM Satellite Radio service by contacting XM at:
http://activate.xmradio.com or call
1.800.XM.RADIO (1.800.967.2346).
12
https://activate.xmradio.ca or call
1.877.GET.XMSR (1.877.438.9677)
Using the Remote Control
You will need your XM Radio ID and a major credit card.
XM will send a signal from the satellites to activate the full channel
lineup. Activation normally takes 10 to 15 minutes, but during busy
periods, you may need to keep your SKYFi3 on for up to an hour to
complete your activation process. When you can access the full
channel lineup on your SKYFi3, you’re done.
Using the Remote Control
We have included a universal remote that controls both your Bose
System as well as your SKYFi3. This remote will duplicate all of
the controls you are used to having with your Bose System, while
seamlessly adding XM features.
For your convenience, the source buttons
Power
(FM/AM, CD, and XM) will Illuminate to the
current remote mode whenever any button
is pressed on the remote.
Mute
FM/AM
CD
Play/Pause Stop/Eject
Presets
On/Off
Wake
to Alarm
Sleep
We have also differentiated the buttons by
color.
Black
buttons
represent Bose functions and gray buttons represent SKYFi3-only
Time - Alarm time
Time +
controls. Many of the buttons, such as volume and power, have
dual controls for both units to enhance your experience while using
the system.
13
Using the Remote Control
A sticker is included only for users
that own the Bose Wave Radio/CD.
Do not attach this sticker unless
you own the shown product.
Using the Remote to Turn on Your System
Power
To get started, press the Power
System.
Power
FM/AM
CD
button to turn on your Bose
FM/AM
CD
Mute
Play/Pause Stop/Eject
To switch to the SKYFi3, press the XM
button. When you press
Wake to Alarm On/Off Sleep
the XM button, the Bose System will automatically switch to AUX
Mute
Play/Pause Stop/Eject
mode while your SKYFi3 is turning
ON
loading
Time
- Alarmthe
time satellite
Time
+ and
signal.
Wake to Alarm On/Off Sleep
Presets
When your SKYFi3 is on
your
System displays AUX or
Time - Bose
Alarm time
Timeand
+
AUX 1 on the screen, it indicates that you are in the XM mode.
Presets
When There’s No Signal on the SKYFi3 Screen
Seek 0
Seek +
If you see “NO SIGNAL” on the SKYFi3
screen,
you
will need to
aim your antenna as described in “Receiving the XM Signal” on
page 10 or call 1.877.GO.DELPHIVol
for
customer support.
Additional
+
Tune/ CH +
Seek 0
Seek +
information can be found
in “Troubleshooting”
on page 19.
14
enter
Tune/ CH +
Vol +
Vol -
Tune/CH -
Using the Remote Control
Note: Your remote control will fill the room with
IR (infared) codes, a beam that helps transmit
data between the devices. For optimum
performance, we recommend that you stand at
least 3' (1m) away and aim the remote between
the Bose System and your SKYFi3.
3' min.
To Get Out of XM Mode
To go back to FM/AM, CD, or other Bose music system commands,
simply press the desired source.
Attn Bose Wave music system Multi-CD Changer Owners: If you
have a 3 disc Wave music system Multi-CD Changer attached to
your Wave Music System, you will need to plug in the included
RCA adapter into the “AUX 1” input on the back of the CD Changer.
You can still use the Aux 2 input for additional external audio devices such as a TV, VCR, DVD Player, cassette player, or MP3 Player.
You can listen to the AUX 2 device by pressing the XM button (on
the included universal remote) twice from FM/AM or CD mode, or
by pressing the XM button once if you are already in XM mode.
The radio will show AUX2 on the screen.
Note: If you are listening to a device connected in AUX 2, your
Delphi SKYFi3 will remain on. You can turn off your SKYFi3 by
pressing the power button on the SKYFi3 or by pressing the
FM/AM or CD button on your universal remote.
15
Using the Remote Control
You will know that your system is connected to XM if the screen
says either “AUX” or “AUX 1”
If your Bose Wave music system’s display is showing AUX 2 when
you press the XM button on your universal remote, press the XM
button again until AUX 1 shows up on the display.you press the
XM button on your universal remote, press the XM button again
until AUX 1 shows up on the display.
Using the Remote Control Stand
16
* If you own a Bose:
Wave Radio/CD, be
sure to attach the
sticker that is enclosed
in this box. After you’ve
attached the sticker to
your remote, adjust
the switch to position
2 inside the battery
compartment.
Using the Remote Control
Bose System Universal Remote Control Buttons: Bose Controls
Power
Turns power on or off
on the Bose System.
Silences a sounding
alarm.
CD
FM/AM
Turns on Bose System
and switches between
FM and AM.
Play/Pause
Plays a CD. Pauses a
playing CD.
XM
Turns on the CD Player. Press to hear audio
from your SKYFi3. (If
you are using a multiCD changer, press
XM again to switch to
AUX2).
Stop/Eject
Mute
Stops a playing CD.
Ejects a stopped CD.
Press to silence audio.
Press again to restore
audio.
Sleep
Sets unit to shut off
automatically.
Time
Sets clock time. In
Alarm Set mode, sets
alarm time.
Alarm On/Off
Presets [1-6]
Seek/Track
Turns the alarm on
or off.
Recall a stored station;
press and hold to store
a radio station.
Adjusts volume of the
audio.
Play Mode
Selects Shuffle and
Repeat CD play modes.
Turns AM or FM Talk
Radio mode on or off.
enter
Tune/MP3
Volume
Finds the next/previous
strong radio station
or CD track. Press and
hold to rapidly move
through radio stations
or CD tracks.
Tune/MP3
Skips to next/previous
radio frequency or
navigates between MP3
CD folders. Press and
hold to rapidly move
through radio stations,
or scan through a CD
track.
See next page for SKYFi3 commands
17
Using the Remote Control
Bose System Universal Remote Control Buttons:
Delphi SKYFi3 Controls
XM
Press to hear audio
from your SKYFi3. (If
you are using a multiCD changer, press
XM again to switch to
AUX2).
Arrow Keys
Select menu entries,
change channels, skip
through songs, change
categories, and more...
Fav/Dir
Numbers [0-9]
Select between direct
entering a channel
number and selecting
channels by favorites.
Enter channels directly
or select your favorite
channel.
Jump
Display
Record
Records a song you
are listening to.
18
Returns to the previous
channel you were
listening to.
enter
Tune/MP3
Changes the display
appearance. Press and
hold to change the
display from vertical to
horizontal orientation.
Mode
Press to change mode:
Live XM, Aux, and My
Music.
Menu
Displays menu options.
Using the Remote Control
Other Things to Know About the Remote Control
• Please refer to the operational instructions for your Bose Wave music system for a full explanation of Bose button functionality. Please refer to the included Delphi SKYFi3 user guide for detailed information on its functionality.
• The replacement battery for your remote control is AAA.
• If you have a Bose System Radio/CD, change the switch inside the battery cover on the remote control to the Bose/CD position. If you are unsure which Bose System you own, the model number can be found on the bottom of your Bose System.
• If you lose or damage the remote, a replacement remote can be purchased by calling 1.877.GO.DELPHI.
19
Troubleshooting
Troubleshooting
• If you do not hear any audio, make sure your volume is set at 30 for the Bose System. Check to make sure that the Bose system is showing AUX and you have a live signal going into the SKYFi3.
• Your SKYFi3 should provide you with trouble-free performance without needing any servicing. If it does not appear to be working properly, first try to remedy the problem by following these steps:
1. Attach all connections firmly and securely.
2. Check to make sure that your SKYFi3 is showing the
preview channel.
3. Check to see that your Bose System shows AUX.
4. Make sure your audio plug is in the AUX input, not the
headphone output on the back of your Bose System.
If you are still having problems, see the “Troubleshooting” section
of the enclosed Delphi SKYFi3 user guide for more detailed troubleshooting information, or call us at 1.877.GO.DELPHI.
20
Care
Care
You should be able to use your SKYFi3 during most of your daily
activities. However, you should remember:
• If your SKYFi3 does get dirty, wipe the case with a soft cloth (lightly moistened with water if necessary), then wipe dry with another cloth. Avoid chemicals such as paint thinner, alcohol, or abrasive cleansers.
• It is best to keep your SKYFi3 out of direct sunlight or other sources of extreme heat.
Caution: Refrain from using food or drinks near your SKYFi3. Spilling food or drinks
on the unit can damage it.
21
Warranty
Warranty
Delphi Limited Consumer Warranty - United States of America
Delphi Product & Service Solutions (“Delphi”) warrants all XM
Satellite Radio Products sold by Delphi (each “Product”) to be free
of defects in material and workmanship, subject to the following
conditions:
Subject to express limitations with respect to the battery and ear
bud components of any Product, the duration of Delphi’s warranty
with respect to each Product is limited to one (1) year from the date
of sale to the original consumer purchaser. The duration of Delphi’s
warranty with respect to the battery and ear bud components of
any Product is limited to thirty (30) days from the date of sale to the
original consumer purchaser.
NO OTHER EXPRESS WARRANTIES ARE MADE WITH RESPECT TO ANY
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. THIS
WARRANTY IS NOT TRANSFERABLE AND APPLIES ONLY TO THE
ORIGINAL CONSUMER PURCHASER OF THE PRODUCT.
22
Warranty
Delphi will, as its sole obligation under this warranty, replace or
repair, at its option, any Product that does not conform to this
warranty. Products may be repaired or replaced with new or with
refurbished items. This limited warranty does not cover defects in
appearance, cosmetic, or decorative items, including any non-operative parts. Under no circumstances will Delphi be liable for any
incidental or consequential damages under this warranty or any
implied warranties.
These remedies are the customer’s exclusive remedies for breach
of warranty. This limited warranty only extends to customers who
purchase the Products in the United States.
Delphi will not be responsible for damage resulting from any:
• (i) deviation of Delphi’s operating instructions as printed in Delphi’s catalog or on any packaging, labels, or other literature provided with a Product,
• (ii) installation of a Product in a manner which is inconsistent with Delphi’s written instructions,
• (iii) alteration or modification of a Product,
23
Warranty
• (iv) misuse,
• (v) neglect,
• (vi) abuse,
• (vii) accident,
• (viii) normal wear and tear,
• (ix) commercial use,
• (x) improper storage,
• (xi) environmental conditions, including excessive temperature or humidity,
• (xii) service by anyone other than a Delphi authorized repair
facility,
• (xiii) use of the Product in conjunction with any non-Delphi branded accessory,
• (xiv) other improper application, installation, or operation of this Product, or
• (xv) defects or malfunctions of which Delphi is not advised within ten (10) days of the expiration of the limited warranty period.
24
Warranty
How You (the Customer) Can Get Service
To obtain warranty service during the first thirty (30) days after the
date of purchase, you must return the defective Product with the
original receipt to the original place of purchase. To obtain warranty service during the first thirty (30) days for Products purchased
specifically from www.shopdelphi.com, you must contact the E-Store
directly at the number provided on your invoice. For all Products
for the remainder of the limited warranty period, you must contact
Delphi by phone at 1.877.GO.DELPHI (1.877.463.3574). If further
clarification or additional information is required from Delphi, you
may call Delphi at 1.877.GO.DELPHI (1.877.463.3574).
If warranty service is needed at any time during the warranty period, the purchaser will be required to furnish a sales receipt/proof of
purchase indicating the date of purchase, amount paid, and place
of purchase. Customers who fail to provide such proof of purchase
will have the Product returned to them or will be charged for the
repair/replacement of any Product. The customer is responsible for
shipping the Product to an authorized Delphi Warranty Facility.
25
Warranty
Note: You must remove the “Memory Card” from your SKYFi3
before returning the Product.
How State Law Relates to the Warranty
Some states do not allow limitations on the duration of implied
warranties, or the exclusion or the limitation of incidental or consequential damages. So the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights.
You may also have other rights that may vary from state to state.
NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO
THIS LIMITED WARRANTY.
Warranty
Delphi Limited Consumer Warranty - Canada
Delphi Product & Service Solutions (“Delphi”) warrants all XM
Satellite Radio Products sold by Delphi (each “Product”) to be free
of defects in material and workmanship, subject to the following
conditions:
26
Warranty
Subject to express limitations with respect to the battery and ear
bud components of any Product, the duration of Delphi’s warranty
with respect to each Product is limited to one (1) year from the date
of sale to the original consumer purchaser. The duration of Delphi’s
warranty with respect to the battery and ear bud components of
any Product is limited to thirty (30) days from the date of sale to the
original consumer purchaser.
DELPHI MAKES NO EXPRESS WARRANTIES WITH RESPECT TO ANY
PRODUCT EXCEPT AS SET FORTH HEREIN. ALL IMPLIED CONDITIONS
AND WARRANTIES, INCLUDING THE IMPLIED CONDITIONS AND
WARRANTIES OR MERCHANTABLE QUALITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET
FORTH ABOVE. THIS WARRANTY IS NOT TRANSFERABLE AND APPLIES
ONLY TO THE ORIGINAL CONSUMER PURCHASER OF THE PRODUCT.
Delphi will, as its sole obligation under this warranty, replace or
repair, at its option, any Product that does not conform to this
warranty. Products may be repaired or replaced with new or with
refurbished items. This limited warranty does not cover defects
in appearance, cosmetic, or decorative items, including any loss
27
Warranty
of revenue, loss of profits, or failure to realize expected savings
(collectively, “Economic Loss”) under this warranty or any implied
conditions or warranties. These remedies are the customer’s exclusive remedies for breach of warranty. This limited warranty only
extends to customers who purchase the Products in Canada.
Delphi will not be responsible for damage resulting from any:
• (i) deviation of Delphi’s operating instructions as printed in Delphi’s catalog or on any packaging, labels, or other literature provided with a Product,
• (ii) installation of a Product in a manner which is inconsistent with Delphi’s written instructions,
• (iii) alteration or modification of a Product,
• (iv) misuse,
• (v) neglect,
• (vi) abuse,
• (vii) accident,
• (viii) normal wear and tear,
• (ix) commercial use,
• (x) improper storage,
• (xi) environmental conditions, including excessive temperature
28
Warranty
or humidity,
• (xii) service by anyone other than a Delphi authorized repair
facility,
• (xiii) use of the Product in conjunction with any non-Delphi branded accessory,
• (xiv) other improper application, installation, or operation of this Product, or
• (xv) defects or malfunctions of which Delphi is not advised within ten (10) days of the expiration of the limited warranty period.
How You (the Customer) Can Get Service
To obtain warranty service during the first thirty (30) days after the
date of purchase, you must return the defective Product with the
original receipt to the original place of purchase. To obtain warranty service for all Products for the remainder of the limited warranty
period, you must contact Delphi by phone at 1.877.GO.DELPHI
(1.877.463.3574). If further clarification or additional information
is required from Delphi, you may call Delphi at 1.877.GO.DELPHI
(1.877.463.3574).
29
Warranty
If warranty service is needed at any time during the warranty
period, the purchaser will be required to furnish a sales receipt/
proof of purchase indicating the date of purchase, amount paid,
and place of purchase. Customers who fail to provide such proof of
purchase will have the Product returned to them or will be charged
for the repair/replacement of any Product. The customer is responsible for shipping the Product to an authorized Delphi Warranty
Facility.
Note: You must remove the “Memory Card” from your SKYFi3
before returning the Product.
How Provincial Law Relates to the Warranty
Some provinces do not allow limitations on the duration of implied
conditions or warranties, or the exclusion of the limitation of Economic Loss. So the above limitations or exclusions may not apply
to you. This warranty gives you specific legal rights. You may also
have other rights that may vary from province to province.
NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO
THIS LIMITED WARRANTY.
30
Notes
31
Notes
32
Notes
33
Delphi Corporation
1441 West Long Lake Road
Troy, Michigan 48098-5090
U.S.A.
Customer Service: 1.877.GO.DELPHI
www.delphi.com
SKYFi3, the XM name, and related logos are trademarks
of XM Satellite Radio Inc.
Wave, Lifestyle, and the Bose name are registered
trademarks of Bose Corporation.
microSD is a trademark of SanDisk Corporation.
©2006 Delphi Corporation. All rights reserved
DPSS-06-E-121
Part No. 25214978