GE Consumer & Industrial
Power Protection
UPS
Uninterruptible Power Supplies
GE imagination at work
UPS
For more than a century, GE has led the way with
innovative technologies and groundbreaking quality
initiatives – literally helping to power the world. Along
the way, through the development and delivery of
state-of-the-art products and uncompromising service,
GE has also built a legacy as a leading supplier of
critical power solutions.
To bridge the gap between the traditional utility grid
and the needs of today’s business, GE offers a complete
portfolio of critical power products and services, from
desktop Uninterruptible Power Supply (UPS) units
to engineered power systems, and from basic UPS
and battery maintenance to comprehensive service
contracts covering every aspect of your power quality
and delivery system.
At GE, our goal is simple – to never let power quality
stand in the way of our customers’ success. That’s why
GE is committed to continue developing and delivering
UPS technology for the digital world
Uninterruptible Power Supplies
A.2
UPS topologies
A.3
RPA™ Redundant Parallel Architecture™
A.6
IEM™ Intelligent Energy Management™
A.8
Service for mission-critical power
A.10
Overview UPS families
A
Introduction
Order codes
Numerical Index
A.1
UPS
UPS topologies - a brief overview
Passive Standby
The passive standby system channels
the incoming mains power, via a filter,
directly to the load. As soon as the
incoming power is outside tolerance,
the UPS switches to battery operation.
mains
switch
filter
to critical
load
Introduction
GE’s solution: none
battery
Line-Interactive
The line-interactive system channels
the incoming mains power, via an AVR
- Automatic Voltage Regulator, directly
to the load. Compared to off-line,
the system can handle much larger
voltage variations before switching to
battery operation.
A
B
X
mains
filter
AVR
switch
to critical
load
GE’s solutions: ML Series, Match
battery
Double Conversion
Input and output are completely
separated: the output converter (DC
to AC, or = to ~) continuously supplies
the critical load with a completely
new, regulated and clean sine wave
output. No switching takes place
when the incoming mains power gets
outside tolerances. A bypass switch
automatically transfers the load to the
mains when the output converter is
unable to supply the load (e.g. due to
overload or overtemperature).
GE’s solutions:
NetPro, LP Series, SitePro, SG Series
A.2
static
switch
mains
to critical
load
battery
UPS
RPA™ - Redundant Parallel Architecture™
The principle
GE provides a unique technology
called Redundant Parallel Architecture
(RPA) that can parallel Uninterruptible
Power Supply (UPS) modules with true
redundancy.
UPS 1
mains
load
UPS 2
Many other so-called redundant UPS offerings have one critical shortfall, in
that they have critical components that are not redundant. RPA technology
provides complete redundancy of all critical components and there are no
single points of failure. RPA technology allows UPS system expansion not only
to increase capacity but also to improve the reliability of the power provided
to critical loads. For mission critical applications, RPA technology provides true
redundancy for the highest reliability.
RPA
A unique concept
With RPA, there is no need for external
electronics or switches to control the
UPS modules in the parallel system.
One of the UPS modules in the system
arbitrarily takes a leadership role, while
the other UPS modules have access to
all control parameters. If one UPS fails
to operate, the load is automatically
redistributed among the others. If
the lead UPS fails to operate then a
different UPS automatically takes on
the leadership role.
The RPA systems are designed to have
no single points of failure, ensuring the
highest level of power protection for
critical loads.
A
B
X
Characteristics
• RPA Configuration provides complete redundancy of all critical components
and allows paralleling of up to four units for increased load capacity. It
ensures excellent dynamic behaviour based on output voltage load sharing.
This provides the highest reliability and availability for mission-critical
applications.
• Modular design allows for system upgrades to meet future power needs
without any interruption to the critical load or transfer to bypass.
• Easy to install and maintain.
• Scaleable design allows for efficient use of capital.
• Peer-to-Peer architecture where any UPS can be the “logic leader” ensuring
no single points of failure.
A.3
UPS
RPA - a comparative overview
Multiple UPS are configured in a system to support an increase in load capacity and/or to improve reliability. There are several
configurations that include multiple UPS. These configurations all share a common shortfall: they all have critical components that
are not redundant.
Introduction
Parallel system with automatic
transfer switch
utility
The parallel system with an Automatic
Transfer Switch (ATS) consists of one
or more UPS modules with outputs
connected by a switch that senses a
loss in voltage and transfers the load to
a different module or modules.
UPS
#1
communication
link
UPS
#2
ATS
critical load
Characteristics
• If one of the UPS modules fails, another unit is available to provide power to
the load.
• No load sharing.
A
• Additional cost of the ATS.
• The ATS is a single point of failure: if it fails, the load will be interrupted even if
utility power is available.
B
X
Parallel system with paralleling
cabinet
utility
The parallel cabinet configuration
uses an external set of centralised
electronics to distribute the load
between the system’s UPS modules.
communication
link
UPS
#1
UPS
#2
paralleling
cabinet
critical load
Characteristics
• If one of the UPS modules fails, another unit is available to provide power to
the load.
• Motor-operated breakers replace the function of the ATS. While less
expensive than an ATS, they operate much more slowly.
• Failure or malfunction of the shared control electronics will result in a load
interruption, which is possible even if the power is present. The shared
electronics package is a single point of failure.
• Non-redundant communications links.
• System price is increased because of the additional cost of the shared
control electronics and motor-operated breakers.
A.4
UPS
RPA - a comparative overview
Hot standby
utility
bypass line
bypass line
secondary
UPS
The cascade system or isolated
redundant system uses the bypass
static switch of the primary UPS to tie
the output of a secondary (stand-by)
UPS to the load.
primary
UPS
critical load
output
Characteristics
RPA
• Inexpensive, since no additional components are added to the system.
• There are many single points of failure.
• No sharing of the load. If the primary unit fails, the secondary unit must be
able to accept a 100% load increase in 10 milliseconds.
A
• Overload capacity is limited to the rating of the static switch of the primary
module.
B
• System MTBF* is typically lower than the MTBF of a single module.
* Mean Time Between Failures.
X
non-redundant data bus
utility
Parallel system with centralized logic
lead
UPS
#1
UPS
#2
centralised control logic
UPS
#3
UPS
#4
UPS
#5
UPS
#6
critical load
Characteristics
The parallel system with centralized
logic is basically designed the same as
the paralleling cabinet configuration.
The difference is that they utilize the
control electronics of one “lead” UPS
module to control the distribution of
the load between the system’s other
modules.
• No ATS required.
• If the “lead” UPS module fails, the remaining units are uncontrolled. The
system may go to bypass on all units, or may stop operation completely.
• If the communication link between the lead and other units fails, the load
may be interrupted even without a utility power failure.
As stated before, these configurations all share a common shortfall: they all have critical components that are not redundant.
GE´s RPA™ technology provides complete redundancy of all critical components and there are no single points of failure. RPA
technology allows UPS system expansion not only to increase capacity but also to improve the reliability of the power provided
to critical loads. For mission critical applications, RPA technology provides true redundancy for the highest reliability.
A.5
UPS
IEM™ - Intelligent Energy Management
GE offers the award-winning Intelligent Energy Management™ (IEM™)
capability to optimise energy costs while maintaining the highest possible
reliability for parallel redundant UPS systems.
10%
38%
15%
Introduction
37%
A
purchasing
direct operating cost
indirect operating cost
maintenance
Typical life cycle cost of a large UPS
load
X
For parallel UPS installations, secured with RPA™, IEM saves energy by
dynamically utilising the UPS modules as required to supply the load without
compromising on the power reliability.
The set-up of IEM is flexible, giving the end user the freedom of choice to select
redundancy degrees in different time periods. IEM also rotates amongst the
units that are switched off to get operating hours equally distributed over all
units.
80%
B
The life cycle cost of a UPS system is built up from different components. In
general, approximately half of the total cost is operating cost as a result of
energy losses - both direct heat losses in the UPS and indirect energy losses
of the air conditioning system. UPS systems are engineered into applications
taking into account the maximum load that needs to be supplied by the
system. In practice the UPS will only supply a part of that load for most of the
time. Many applications are shut down outside business hours. In addition very
often a safety margin is included (over-dimensioning) for future expansion. As
a result the system is not used at its nominal rating most of the time during
operation. This reduces the efficiency of the system and increases the energy
costs.
Use of IEM resulted in incremental energy savings of up to $33,000 annually
for a system of four 100kVA units secured by RPA™ operating at full load for 50
hours per week and partial load (10%) for the remaining time.
20%
20%
00:00
07:00
18:00
00:00
time
In a typical application the actual load
supplied is generally smaller than the
nominal rating of the system
Benefits
• Reduced energy consumption
• Maintaining of power quality and reliability to the critical load
• Mains power quality monitoring
• User-definable protection levels
• Scheduled activation
• Automatic switch on of additional units in critical situations, increasing
reliability
• Equal operating hours for each UPS in a parallel system
A.6
UPS
IEM - compared to legacy parallel system
load
75%
UPS 2
100 kVA
75%
UPS 3
100 kVA
75%
UPS 4
100 kVA
75%
UPS 1
100 kVA
15%
UPS 2
100 kVA
15%
UPS 3
100 kVA
15%
UPS 4
100 kVA
15%
Legacy Parallel System
Full-Load Condition
load = 100%
time
load 300 kVA
07:00
18:00
In full load condition the efficiency of a
UPS is optimal. However, this condition
only occurs typically 10 hours / day.
efficiency
4 UPS
load %
load
Legacy Parallel System
Partial-Load Condition
load = 20%
load 60 kVA
18:00
time
07:00
In partial load condition (most of the
time) the efficiency of the UPS is lower
causing higher energy costs.
IEM
UPS 1
100 kVA
A
efficiency
4 UPS
B
load %
X
load
UPS 1
100 kVA
load = 20%
UPS 2
100 kVA
load 60 kVA
UPS 3
100 kVA
30%
UPS 4
100 kVA
30%
18:00
time
07:00
efficiency
2 UPS
load
load = 20%
load 60 kVA
UPS 4
100 kVA
18:00
time
60%
IEM
Intelligent Energy Management
Partial non-Critical Load
Condition (Utility Redundancy)
07:00
efficiency
1 UPS
UPS 3
100 kVA
With IEM installed 2 units will be
switched off automatically. In this
way the efficiency is improved, still
maintaining a n+1 redundant system.
load %
UPS 1
100 kVA
UPS 2
100 kVA
IEM
Intelligent Energy Management
Partial Critical Load Condition
(UPS Redundancy)
load %
With IEM installed 3 units can be
switched off. In this way the efficiency
is improved even more. The bypass is
still available and will supply the load in
case of a failure.
A.7
UPS
Service for mission-critical power
Service coverage
Service
GE has local offices in a number of countries around the
globe and also a network of selected business partners,
whose salespeople and service engineers combine
expertise in our solutions with an in-depth knowledge of
local market conditions. GE’s business partners, located
in more than 80 countries around the world, use all that
expertise and knowledge to adapt GE’s products and
services precisely to their customers’ needs.
Whether you are a large corporation with multiple
sites or a small business owner with a single
location, GE will enable you to have a constant
supply of clean and reliable power to keep your
business up and running.
Service portfolio
GE offers a comprehensive portfolio of power quality
services including:
We are at home in all industries, specialized in solutions and
services for your electrical infrastructure, including:
A
Critical power systems
• UPS systems
• stationary battery systems
• static transfer switches (STS)
B
Low voltage equipment
• maintenance & service contracts
• extended warranty
• remote monitoring & diagnostics
X
Industrial controls
• variable speed drives
• soft starters
• PLC
On site & emergency services
• 24*7 emergency hotline
• installation, commissioning, start-up and upgrades
• repair, upgrade, retrofits
• assessment, inspection, testing
• on-line assistance
Contractual services
• maintenance & service contracts
• extended warranty
• remote monitoring & diagnostics
• guaranteed intervention times
• preventive, planned maintenance
• resident technical services
• upgrade management
Parts and repairs
• spare parts supply
• repair services
• replacement / return
• web based parts supply
• equipment rental
Training
• training for operators
• training for maintenance staff
• product training
• web based training
24*7
A.8
UPS
Notes
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
A
B
X
A.9
UPS
Pluggable
1-1 phase
NetPro and NetPro 19 inch
0.6-4 kVA
LP 11
3-1 phase
LP 31T
5-10 kVA
LP 31
8-20 kVA
LP 33 10-30
10-30 kVA
3-3 phase
X
Hard-wired
B
Match and Match 19 inch
0.5-3 kVA
3-10 kVA
On-line double conversion
A
ML Series
0.35-1 kVA
UPS - overview
Line-interactive
UPS families - overview
40-120 kVA
SitePro Series
10-500 kVA
80-200 kVA
A.10
LP 33 40-120
SG Series
Uninterruptible Power Supplies
Introduction
B
Order codes
B.2
ML Series
B.4
Match and Match 19 inch
B.6
NetPro and NetPro 19 inch
B.8
LP Series
B.18
SitePro Series
B.26
SG Series
B.30
STS - Static Transfer Switch
B.32
Connectivity solutions
Numerical Index
B.1
UPS
ML Series - line-interactive UPS
Applications
The line-interactive Digital Energy ML Series UPS is used in a wide range of IT,
networking and telecommunications applications. It will protect servers, hubs,
switches and routers, and may also be installed to protect PCs, workstations,
cash registers, fax machines, modems and ISDN adaptors.
Order codes
Characteristics
The line-interactive ML Series UPS normally supplies the load through a bypass
circuit. Filtering capabilities guard against surges, spikes and high frequency
interferences. The utility also keeps the battery fully charged.
Function
A
Providing exceptional cost-critical
protection for electrical equipment
B
Standards / Marking
The input voltage window is extremely wide: as long as the input voltage is
within 140-300 Vac (ML 350-700 VA) or between 160-265 Vac (ML 1000 VA)
the Automatic Voltage Regulation (AVR) guarantees an output voltage that is
between 198-265 Vac and acceptable for every modern ICT device.
In case of a mains failure the UPS switches to battery operation with a transfer
time of 4 milliseconds, sufficiently short for computers which therefore will
continue to operate without interruption.
Safety: EN 50091-1-1; EN 60950;
EMC: EN 50091-2
X
Technical specifications (general)
Input voltage range 350-700 VA models
Input voltage range 1000 VA model
Input frequency
Output voltage
Output frequency
Ambient operating temperature
Relative humidity
Audible noise
Communication interface
Protection degree
140-300 Vac
160-265 Vac
50Hz ± 10%
230Vac +5% / -10% (battery operation)
50Hz
-10 to 40°C
95% non-condensing
< 35 dB(A)
RS232
IP20
Runtime table (minutes)
ML Series model
350
500
700
1000
at typical UPS load (75%)
4
5
7
7
Watts (1) 60
210
300
420
600
25
3
-
40
8
3
-
60
14
7
3
-
85
24
11
7
3
(1) Max. power factor 0.6 (0.7 at 90% load)
B.2
UPS
ML Series - line-interactive UPS
ML Series
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net weight
(kg)
Battery
(V/Ah)
No. of outlets
IEC 320
Ref. No.
350/210
500/300
700/420
1000/600
3
3
3
3
150x110x300
150x110x300
150x110x420
150x110x450
6.5
7.5
11
13
12/5
12/7
24/5
24/7
2
2
2
2
916181
916182
916183
916184
-
-
53x130x204
0.8
-
-
912349
TM
Option
Manual service
bypass
ML - line-interactive
Rating
(VA / W)
A
B
X
B.3
UPS
Match Series - line-interactive UPS
Applications
The line-interactive Digital Energy Match Series UPS is used in a wide range
of IT, networking and telecommunications applications. It will protect servers,
hubs, switches and routers, and may also be installed to protect PCs, workstations, cash registers, fax machines, modems and ISDN adaptors.
Order codes
Characteristics
The line-interactive Match Series UPS normally supplies the load through a
bypass circuit. Filtering capabilities guard against surges, spikes and high
frequency interferences. The utility also keeps the battery fully charged.
Function
A
Providing exceptional cost-critical
protection for electrical equipment
B
Standards / Marking
The input voltage window is extremely wide: as long as the input voltage is
within 165-275 Vac (Match 500-1500 VA) or even between 140-305 Vac (Match
2200-3000 VA) the Automatic Voltage Regulation (AVR) guarantees an output
voltage that is between 190-254 Vac and acceptable for every modern ICT
device.
In case of a mains failure the UPS switches to battery operation with a transfer
time of 4 milliseconds, sufficiently short for computers which therefore will
continue to operate without interruption.
Safety: EN 50091-1-1; EN 60950;
IEC 60950
EMC: EN 50091-2
X
Technical specifications (general)
Input voltage range 500-1500 VA models, 70% load
Input voltage range 2200-3000 VA models, 70% load
Input frequency
Output voltage
Output frequency
Ambient operating temperature
Relative humidity
Audible noise
Communication interface
Protection degree
165-275 Vac
140-305 Vac
50 or 60 Hz ± 5%
230 Vac ± 2% (battery operation)
50 or 60 Hz, autosensing
-10 to 40°C
95% non-condensing
35-45 dB(A)
RS232; Plug and Play; open collector alarm contacts (model dependent)
IP20
Runtime table (minutes)
Match Series model
500
700
700L
1000
1000L
1500
2200
3000
at typical UPS load (75%)
5
11
38
12
25
14
8
8
Watts (1) 60
180
300
420
600
900
1540
2100
35
8
3
-
77
23
11
6
-
185
69
40
27
-
106
38
21
14
8
-
185
69
40
27
18
-
185
69
40
27
18
9
-
237
83
49
33
22
12
5
-
308
112
66
46
31
19
8
5
(1) Max. power factor Match 500-1500: 0.6; Match 2200/3000: 0.7
B.4
UPS
Match Series - line-interactive UPS
Match
1000-3000 VA
500/300
700/420
1000/600
1500/900
2200/1540*
battery pack
3000/2100*
battery pack
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net weight
(kg)
Battery
(V/Ah)
No. of outlets
IEC 320
Ref. No.
4
8
8
10
5
5
144x155x350
144x155x350
225x180x360
225x180x360
225x187x485
225x187x485
225x187x485
225x187x485
7.2
10.0
16.5
20.8
18.0
21.3
20.1
26.5
12/7
24/7
36/7
36/12
36/14
48/14
3
3
4
4
7
7
-
912321
912322
912324
912326
912328
912330
912329
912331
* UPS enclosure without batteries, order separate battery pack
more battery packs can be connected for longer runtimes
Match L
built-in longer
runtime
700/420
1000/600
30
20
225x180x360
225x180x360
20.8
20.8
36/12
36/12
4
4
912323
912325
700/420
1000/600
1500/900
2200/1540
3000/2100
8
8
10
5
5
3HUx19”x440mm
3HUx19”x440mm
3HUx19”x440mm
6HUx19”x440mm
6HUx19”x440mm
19.0
22.0
26.0
50.0
57.0
12/7
24/7
36/7
36/12
48/14
3
3
4
4
7
912439
912440
912441
915571
915572
Match - line-interactive
500-700 VA
Rating
(VA / W)
A
Match 19 inch
B
2200-3000 VA: 6HU
X
Battery pack
for Match 19 inch
for 2200 VA
for 3000 VA
15
15
3HUx19”x440mm
3HUx19”x440mm
26.0
30.0
36/14
48/14
-
912453
912454
to increase runtime
Options
Manual service
bypass
Manual service bypass box, hxwxd = 53x130x204mm
912349
DC cable (1.5m) for 3rd party external battery Match 2200
DC cable (1.5m) for 3rd party external battery Match 3000
914850
914851
B.5
UPS
NetPro Series - double conversion UPS
Applications
The on-line NetPro UPS is designed for mission-critical applications. It is used in
a wide range of IT networking and telecommunications applications: missioncritical servers, telecommunication equipment and local area networks.
Order codes
Characteristics
The NetPro UPS is a true VFI (Voltage & Frequency Independent) on-line double
conversion UPS. This technology allows the NetPro to eliminate any power
reliability problem.
Standards / Marking
A
Safety: EN 50091-1-1; EN 60950;
IEC 60950
EMC: EN 50091-2; EN 50081-1 +
EN 50082-1; IEC 61000-4-5
B
The incoming AC mains power is continuously converted by the input
converter to DC, which is used to charge the batteries and to supply the output
converter. This output converter synthesizes a completely new AC sine wave
output for the connected load. Any mains disturbance is blocked at the input.
The 2000-4000 VA models are equipped with a LCD information panel with
status and alarm settings.
The 3000-4000 VA models have a programmable outlet that can be switched
off for less critical loads, thus maximizing up-time of critical devices.
Function
X
Providing exceptionally reliable protection for electrical equipment
Technical specifications (general)
Input voltage range 600-2000 VA models, 70% load
Input voltage range 3000-4000 VA models, 70% load
Input frequency
Output voltage 600-1500 VA models
Output voltage 2000-4000 VA models
Output frequency
Ambient operating temperature
Relative humidity
Audible noise
Communication interface
Protection degree
120-264 Vac
160-264 Vac
50 or 60 Hz ± 5%
230 Vac ± 2%
220/230/240 Vac ± 1%
50 or 60 Hz, front selectable
-10 to 40°C
95% non-condensing
35-45 dB(A)
USB; RS232; Plug and Play; open collector alarm contacts
IP20
Runtime table (minutes)
B.6
NetPro Series model
600
1000
1500
2000
3000
4000
at typical UPS load (75%)
Watts 60
120
240
360
600
900
1200
1500
1800
2400
14
55
32
16
9
-
13
85
51
27
17
8
-
11
116
71
38
25
13
7
-
14
186
113
61
41
23
14
9
-
14
247
159
91
63
37
24
16
12
9
-
11
276
178
102
70
42
27
19
14
11
7
UPS
NetPro Series - double conversion UPS
NetPro Series
2000-4000 VA
6 mm
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net weight
(kg)
Battery
(V/Ah)
600/360
1000/600
1500/900
2000/1200
3000/1800
4000/2400
9
8
7
9
9
7
225x185x430
225x185x430
225x185x430
293x220x557
293x220x557
293x220x557
13.0
15.5
18.0
29.0
38.0
42.0
24/7
36/7
48/7
72/7
108/7
120/7
2
2
2
2
2+1 (1)
2+1 (1)
no
yes
no
yes
yes
no
912332
912333
912334
912335
912337
912339
2000/1200
3000/1800
9
9
293x220x557
293x220x557
40.0
50.0
72/7
108/7
2
2+1 (1)
yes
yes
912336
912338
Ref. No.
600-1500 VA
NetPro ISO
(1) programme output
galvanic isolation
Battery packs
for NetPro (ISO)
to increase runtime
for NP 1000
for NP 1000
35
-
225x185x430
225x185x430
19.0
4.0
36/14
no batt.
-
yes
yes
912341
912340
for NP 2000
for NP 2000
for NP 2000
for NP 2000
22
36
52
-
293x220x557
293x220x557
293x220x557
293x220x557
19.0
35.0
50.0
4.0
72/7
72/14
72/21
no batt.
-
yes
yes
yes
yes
912342
912343
912345
912344
for NP 3000
for NP 3000
for NP 3000
22
37
-
293x220x557
293x220x557
293x220x557
27.0
50.0
4.0
108/7
108/14
no batt.
-
yes
yes
yes
912346
912348
912347
600/360
1000/600
1500/900
2000/1200
3000/1800
9
8
7
9
9
3HUx19”x440mm
3HUx19”x440mm
3HUx19”x440mm
3HUx19”x440mm
6HUx19”x440mm
19.0
22.0
24.0
29.0
52.0
24/7
36/7
48/7
72/7
108/7
4
4
4
4
4
no
no
yes
yes
yes
912444
912445
912446
912447
915573
for NP 1000
for NP 1000
35
70
3HUx19”x440mm
3HUx19”x440mm
28.0
42.5
36/14
36/28
-
yes
yes
912449
912450
for NP 2000
36
3HUx19”x440mm
42.5
72/14
-
yes
912451
for NP 3000
22
3HUx19”x440mm
35.0
108/7
-
yes
912452
NetPro - double conversion
9 mm
No. of outlets DC connector
(batt. ext.)
IEC 320
Rating
(VA / W)
A
B
X
NetPro 19 inch
600-2000 VA: 3HU
Battery pack
for NetPro 19 inch
to increase runtime
Options
Manual service
bypass
Manual service bypass box, hxwxd = 53x130x204mm
912349
DC cable (1.5m) for 3rd party external battery NetPro 1000
DC cable (1.5m) for 3rd party external battery NetPro 2000
DC cable (1.5m) for 3rd party external battery NetPro 3000
910042
910043
910044
B.7
UPS
LP 11 Series - double conversion UPS
Applications
The on-line LP UPS Series is designed for a range of mission-critical
applications. The LP UPS is easy to install and service, optimised for the
office environment. The robust design allows for more traditional industrial
applications.
Order codes
Characteristics
A
B
The LP 11 UPS is a 1-phase in / 1-phase out, true VFI (Voltage & Frequency
Independent) on-line double conversion, intelligent and heavy duty UPS. The
VFI design concept enables the highest level of protection even under the
toughest conditions.
Standards / Marking
The system power and reliability can be easily expanded by adding units,
creating a redundant system with no single points of failure, utilizing GE’s
unique Redundant Parallel Architecture™ (RPA™) technology.
Safety: EN 50091-1-1; EN 60950;
IEC 60950
EMC: EN 50091-2; IEC 62040-2
Surge capability: IEC 61000-4-5
(6kV 1.2/50μs, 3kA 8/20μs)
Function
Providing exceptionally reliable protection for electrical equipment
X
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Environment
Ambient operating temperature
Relative humidity
Audible noise
Interfacing
Standard features
RPA
Battery extension
Backfeed protection
Software compatibility
172-285 Vac
40-70 Hz
220/230/240 Vac ± 1% (user selectable)
50 or 60 Hz, front selectable
IP 20 (IEC 60529)
-10 to 40°C
95% non-condensing
40-55 dB(A), load and temperature dependent
std: RS232; optional: potential free contacts, SNMP
ECO mode, SBM Superior Battery Management, boost charging
optional
optional for 5-10 kVA models, not available for 3 kVA
optional for 3-6 kVA models, not available for 8-10 kVA
JUMP DataShield™, JUMP Manager™, IRIS
Runtime table (minutes)
LP 11 UPS model
at typical UPS load (75%)
VA/Watts
1000 / 800
2000 / 1600
3000 / 2400
5000 / 4000
6000 / 4800
8000 / 6400
10000 / 8000
B.8
3-11
5-11
6-11
8-11
10-11
16
34
15
8
-
16
62
30
14
9
-
12
62
30
14
9
7
-
18
112
57
37
20
16
10
-
12
112
57
37
20
16
10
7
UPS
LP 11 Series - double conversion UPS
LP 11
with batteries
LP 11
without batteries
Battery
(V/Ah)
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net weight
(kg)
DC connector
(batt. ext.)
Ref. No.
3
5
6
8
10
144/7
240/7
240/7
240/12
240/12
8
9
7
10
7
537x313x590
537x313x590
537x313x590
680x313x720
680x313x720
85
110
115
165
170
no (1)
yes
yes
yes
yes
*
*
*
*
*
3
5
6
8
10
144/7
240/7
240/7
240/12
240/12
8
9
7
10
7
537x313x590
537x313x590
537x313x590
680x313x720
680x313x720
85
110
115
165
170
no (1)
yes
yes
yes
yes
*
*
*
*
*
3
5
6
8
10
-
-
537x313x590
537x313x590
537x313x590
680x313x720
680x313x720
53
58
63
93
98
no (1)
yes
yes
yes
yes
*
*
*
*
*
LP 11 - double conversion
LP 11 parallel
with batteries
Rating
(kVA)
A
B
LP 11 parallel
without batteries
Battery cabinets
with batteries
Battery cabinets
without batteries
Options
for LP 11
3
5
6
8
10
-
-
537x313x590
537x313x590
537x313x590
680x313x720
680x313x720
53
58
63
93
98
no (1)
yes
yes
yes
yes
*
*
*
*
*
for LP 5-11
for LP 5-11
240/7
240/14
24
40
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 6-11
for LP 6-11
240/7
240/14
19
32
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 8-11
for LP 8-11
240/7
240/14
20
29
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 10-11
for LP 10-11
240/7
240/14
15
23
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 5/6/8/10-11
-
-
537x313x590
20
-
*
RPA Redundant Parallel Architecture kit (1 per unit)
Backfeed relay for LP 3/5/6-11
Connector and cable for 3rd party external battery
X
*
*
*
(1) For longer runtimes choose LP 5-11
* For ordering please contact customer service.
B.9
UPS
LP 31T Series - double conversion UPS
Applications
The on-line LP UPS Series is designed for a range of mission-critical
applications. The LP UPS is easy to install and service, optimised for the
office environment. The robust design allows for more traditional industrial
applications.
Order codes
Characteristics
The LP 31T UPS is a 3-phase in / 1-phase out, true VFI (Voltage & Frequency
Independent) on-line double conversion, intelligent and heavy duty UPS. The
VFI design concept enables the highest level of protection even under the
toughest conditions.
Standards / Marking
A
B
Safety: EN 50091-1-1; EN 60950;
IEC 60950
EMC: EN 50091-2; IEC 62040-2
Surge capability: IEC 61000-4-5
(6kV 1.2/50μs, 3kA 8/20μs)
The system power and reliability can be easily expanded by adding units,
creating a redundant system with no single points of failure, utilizing GE’s
unique Redundant Parallel Architecture™ (RPA™) technology.
The LP 31T is a LP 11 UPS equipped with a 3-1 phase conversion input
transformer, galvanically separating the UPS from the incoming 3-phase
mains.
Function
Providing exceptionally reliable protection for electrical equipment
X
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Environment
Ambient operating temperature
Relative humidity
Audible noise
Interfacing
Standard features
RPA
Battery extension
Backfeed protection
Software compatibility
340-470 Vac
40-70 Hz
220/230/240 Vac ± 1% (user selectable)
50 or 60 Hz, front selectable
IP 20 (IEC 60529)
-10 to 40°C
95% non-condensing
40-55 dB(A), load and temperature dependent
std: RS232; optional: potential free contacts, SNMP
ECO mode, SBM Superior Battery Management, boost charging
optional
optional
standard available
JUMP DataShield™, JUMP Manager™, IRIS
Runtime table (minutes)
LP 31T UPS model
at typical UPS load (75%)
VA/Watts
1000 / 800
2000 / 1600
3000 / 2400
5000 / 4000
6000 / 4800
8000 / 6400
10000 / 8000
B.10
5-31T
6-31T
8-31T
10-31T
16
62
30
14
9
-
12
62
30
14
9
7
-
18
112
57
37
20
16
10
-
12
112
57
37
20
16
10
7
UPS
LP 31T Series - double conversion UPS
LP 31T
with batteries
LP 31T
without batteries
Battery
(V/Ah)
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net weight
(kg)
DC connector
(batt. ext.)
Ref. No.
5
6
8
10
240/7
240/7
240/12
240/12
9
7
10
7
855x313x590
855x313x590
995x313x720
995x313x720
180
185
270
275
yes
yes
yes
yes
*
*
*
*
5
6
8
10
240/7
240/7
240/12
240/12
9
7
10
7
855x313x590
855x313x590
995x313x720
995x313x720
180
185
270
275
yes
yes
yes
yes
*
*
*
*
5
6
8
10
-
-
855x313x590
855x313x590
995x313x720
995x313x720
128
133
198
203
yes
yes
yes
yes
*
*
*
*
LP 31T - double conversion
LP 31T parallel
with batteries
Rating
(kVA)
A
B
LP 31T parallel
without batteries
Battery cabinets
with batteries
Battery cabinets
without batteries
Options
for LP 31T
5
6
8
10
-
-
855x313x590
855x313x590
995x313x720
995x313x720
128
133
198
203
yes
yes
yes
yes
*
*
*
*
for LP 5-31T
for LP 5-31T
240/7
240/14
24
40
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 6-31T
for LP 6-31T
240/7
240/14
19
32
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 8-31T
for LP 8-31T
240/7
240/14
20
29
537x313x590
537x313x590
70
120
no
yes
*
*
for LP 10-31T
for LP 10-31T
240/7
240/14
15
23
537x313x590
537x313x590
70
120
no
yes
*
*
for 5-10 kVA
-
-
537x313x590
20
-
*
RPA Redundant Parallel Architecture kit (1 per unit)
Connector and cable for 3rd party external battery
X
*
*
* For ordering please contact customer service.
B.11
UPS
LP 31 Series - double conversion UPS
Applications
The on-line LP UPS Series is designed for a range of mission-critical
applications. The LP UPS is easy to install and service, optimised for the
office environment. The robust design allows for more traditional industrial
applications.
Order codes
Characteristics
The LP 31 UPS is a 3-phase in / 1-phase out, true VFI (Voltage & Frequency
Independent) on-line double conversion, intelligent and heavy duty UPS. The
VFI design concept enables the highest level of protection even under the
toughest conditions.
Function
A
B
X
Providing exceptionally reliable
protection for electrical equipment
The transformerless design provides a high efficiency. In the ECO Mode the
efficiency can be even further increased. The batteries are easy to replace by
acces via the front. Superior Battery Management optimizes the lifespan of the
batteries and keeps you from surprises.
Standards / Marking
Safety: EN 50091-1-1; EN 60950;
IEC 60950
EMC: EN 50091-2; IEC 62040-2
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Environment
Ambient operating temperature
Relative humidity
Audible noise
Interfacing
Standard features
Battery extension
Backfeed protection
Software compatibility
300-470 Vac
45-65 Hz
220/230/240 Vac ± 1% (user selectable)
50 or 60 Hz, front selectable
IP 20 (IEC 60529)
-10 to 40°C
95% non-condensing
40-55 dB(A), load and temperature dependent
std: RS232; optional: potential free contacts, SNMP
ECO mode, SBM Superior Battery Management
optional
standard available
JUMP DataShield™, JUMP Manager™, IRIS
Runtime table (minutes)
LP 31 UPS model
at typical UPS load (75%)
VA/Watts 4000 / 3200
5000 / 4000
8000 / 6400
10000 / 8000
15000 / 12000
20000 / 16000
8-31 (1)
10-31 (1) 15-31 (2) 20-31 (2)
22
35
24
14
(1) 7Ah battery
B.12
16
35
24
14
10
-
23
75
56
28
24
13
(2) 14Ah battery
13
75
56
28
24
13
10
UPS
LP 31 Series - double conversion UPS
LP 8-31
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net weight
(kg)
Ref. No.
LP 8-31 UPS 8 kVA without battery
LP 8-31 UPS with 7Ah battery in UPS cabinet
LP 8-31 UPS with 14Ah battery in UPS cabinet
240/7
240/12
14
36
1190x410x890
1190x410x890
1190x410x890
135
250
355
*
*
*
LP 10-31 UPS 10 kVA without battery
LP 10-31 UPS with 7Ah battery in UPS cabinet
LP 10-31 UPS with 14Ah battery in UPS cabinet
240/7
240/14
10
25
1190x410x890
1190x410x890
1190x410x890
135
250
355
*
*
*
LP 15-31 UPS 15 kVA without battery
LP 15-31 UPS with 14Ah battery in UPS cabinet
240/14
13
1190x410x890
1190x410x890
150
365
*
*
LP 10-31
LP 15-31
LP 31 - double conversion
Battery
capacity
(V/Ah)
A
LP 20-31
LP 20-31 UPS 20 kVA without battery
LP 20-31 UPS with 14Ah battery in UPS cabinet
10
240/14
1190x410x890
1190x410x890
150
365
*
*
B
X
Options
battery cabinets
and -charger
Options
special
Battery cabinet without batteries
Battery cabinet with batteries 2x240V/14Ah
Battery charger 4.2A, necessary for battery capacity over 14Ah
on LP 8-31 and LP 10-31 with capacity > 14Ah
925x410x890
925x410x890
85
300
*
*
-
-
*
Wooden crate (per cabinet) mandatory for sea and air freights
-
-
*
Runtime selection table
1 battery cabinet
2 battery cabinets
Runtimes (minutes) at full load, power factor 0.8
7 Ah battery in UPS
14 Ah battery in UPS
7 Ah battery in UPS
14 Ah battery in UPS
LP 8-31
58
80
101
125
LP 10-31
40
58
78
96
LP 15-31
33
55
LP 20-31
25
41
* For ordering please contact customer service.
B.13
UPS
LP 33 10-30 Series - double conversion UPS
Applications
The on-line LP UPS Series is designed for a range of mission-critical
applications. The LP UPS is easy to install and service, optimised for the
office environment. The robust design allows for more traditional industrial
applications.
Order codes
Characteristics
The LP 33 UPS is a 3-phase in / 3-phase out, true VFI (Voltage & Frequency
Independent) on-line double conversion, intelligent and heavy duty UPS. The
VFI design concept enables the highest level of protection even under the
toughest conditions.
The system power and reliability can be easily expanded by adding units,
creating a redundant system with no single points of failure, utilizing GE’s
unique Redundant Parallel Architecture™ (RPA™) technology.
Function
A
B
X
Providing exceptionally reliable
protection for electrical equipment
Standards / Marking
Safety: EN 50091; IEC 62040
Protection: IEC60529
EMC: EN 50091-2 (Class A)
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Environment
Ambient operating temperature
Relative humidity
Audible noise
Interfacing
Standard features
Battery extension
Backfeed protection
Software compatibility
324-478 Vac
45-65 Hz
380/400/415 Vac ± 1% (user selectable)
50 or 60 Hz, front selectable
IP 20 (IEC 60529)
0 to 40°C
95% non-condensing
40-55 dB(A), load and temperature dependent
std: RS232; potential free contacts, SNMP
SBM Superior Battery Management
optional
standard available
JUMP DataShield™, JUMP Manager™, IRIS
Runtime table (minutes) (1)
LP 33 UPS model
at typical UPS load (75%)
VA/Watts 3000 / 2400
5000 / 4000
8000 / 6400
10000 / 8000
15000 / 12000
20000 / 16000
30000 / 24000
(1) with battery:
B.14
10-33
20-33
30-33
15
48
27
14
10
-
15
90
57
35
27
15
10
-
15
130
80
53
42
28
21
10
7Ah
14Ah
21Ah
UPS
LP 33 10-30 Series - double conversion UPS
LP 20-33
LP 30-33
Options
battery cabinets
and -charger
Battery
capacity
(V/Ah)
Runtime
(minutes)
at 100% load
Dimensions
(hxwxd, mm)
Net
weight
(kg)
Ref. No.
LP 10-33 UPS 10 kVA with 7 Ah battery, single input
LP 10-33 UPS 10 kVA with 14 Ah battery, single input
LP 10-33 UPS 10 kVA with 7 Ah battery, single input + RPA
LP 10-33 UPS 10 kVA with 14 Ah battery, single input + RPA
LP 10-33 UPS 10 kVA with 7 Ah battery, dual input
LP 10-33 UPS 10 kVA with 14 Ah battery, dual input
LP 10-33 UPS 10 kVA with 7 Ah battery, dual input + RPA
LP 10-33 UPS 10 kVA with 14 Ah battery, dual input + RPA
LP 10-33 UPS 10 kVA without battery, single input
LP 10-33 UPS 10 kVA without battery, single input + RPA
LP 10-33 UPS 10 kVA without battery, dual input
LP 10-33 UPS 10 kVA without battery, dual input, + RPA
240/7
240/14
240/7
240/14
240/7
240/14
240/7
240/14
-
10
25
10
25
10
25
10
25
-
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
247
345
247
345
247
345
247
345
113
113
113
113
*
*
*
*
*
*
*
*
*
*
*
*
LP 20-33 UPS 20 kVA with 14 Ah battery, single input
LP 20-33 UPS 20 kVA with 14 Ah battery, single input + RPA
LP 20-33 UPS 20 kVA with 14 Ah battery, dual input
LP 20-33 UPS 20 kVA with 14 Ah battery, dual input + RPA
LP 20-33 UPS 20 kVA without battery, single input
LP 20-33 UPS 20 kVA without battery, single input + RPA
LP 20-33 UPS 20 kVA without battery, dual input
LP 20-33 UPS 20 kVA without battery, dual input, + RPA
240/14
240/14
240/14
240/14
-
10
10
10
10
-
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
1310x500x780
372
372
372
372
140
140
140
140
*
*
*
*
*
*
*
*
LP 30-33 UPS 30 kVA with 21 Ah battery, single input
LP 30-33 UPS 30 kVA with 21 Ah battery, single input + RPA
LP 30-33 UPS 30 kVA with 21 Ah battery, dual input
LP 30-33 UPS 30 kVA with 21 Ah battery, dual input + RPA
LP 30-33 UPS 30 kVA without battery, single input
LP 30-33 UPS 30 kVA without battery, single input + RPA
LP 30-33 UPS 30 kVA without battery, dual input
LP 30-33 UPS 30 kVA without battery, dual input, + RPA
240/21
240/21
240/21
240/21
-
10
10
10
10
-
1310x660x780
1310x660x780
1310x660x780
1310x660x780
1310x660x780
1310x660x780
1310x660x780
1310x660x780
520
520
520
520
140
140
140
140
*
*
*
*
*
*
*
*
LP 33 10-30 - double conversion
LP 10-33
A
B
X
Battery cabinet with 21 Ah batt, including cables (5m) and battery temperature sensor
Battery cabinet with 28 Ah batt, including cables (5m) and battery temperature sensor
Battery cabinet with 35 Ah batt, including cables (5m) and battery temperature sensor
Battery cabinet with 42 Ah batt, including cables (5m) and battery temperature sensor
Battery cabinet without batteries, including cables (5m) and battery temperature sensor
Mounting set for 7 Ah battery in UPS cabinet (40 blocks) without battery
Mounting set for 2x7 Ah battery in UPS cabinet (80 blocks) without battery
Mounting set for 3x7 Ah battery in UPS cabinet (120 blocks) without battery
Mounting set for each 7 Ah battery in battery cabinet (40 blocks) without battery, incl. fuses
Battery fuse box (with fuses) for LP 10-33
Battery fuse box (with fuses) for LP 20-33
Battery fuse box (with fuses) for LP 30-33
Additional battery charger 4.2 A (can be installed in UPS)
1050x760x780
1050x760x780
1050x760x780
1050x760x780
1050x760x780
-
450
570
690
810
90
-
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
Note: UPS and battery cabinets without batteries are also without battery mounting sets.
To mount locally purchased batteries, order the mounting set.
Options
special
Wooden crate (per cabinet) mandatory for sea and air freights, 10-20 kVA
Wooden crate (per cabinet) mandatory for sea and air freights, 30 kVA
Wooden crate (per cabinet) mandatory for sea and air freights, battery cabinets
Runtime selection table
Runtimes (minutes) at full load, power factor 0.8
Battery cabinet with 21 Ah battery
Battery cabinet with 28 Ah battery
Battery cabinet with 35 Ah battery
Battery cabinet with 42 Ah battery
LP 10-33
45
60
80
100
LP 20-33
20
28
37
45
LP 30-33
15
22
28
* For ordering please contact customer service.
B.15
UPS
LP 33 40-120 Series - double conversion UPS
Applications
The GE Digital Energy LP 33 Series is a highly reliable and cost effective three
phase UPS system providing critical power protection for a wide range of
applications.
Order codes
The GE Digital Energy LP 33 40-120 was developed using GE’s Design for
Six Sigma methodology to ensure that the product fully meets customer
requirements and expectations.
Characteristics
Function
A
B
X
The LP 33 UPS is a 3-phase in / 3-phase out, true VFI (Voltage & Frequency
Independent) on-line double conversion, intelligent and heavy duty UPS. The
VFI design concept enables the highest level of protection even under the
toughest conditions.
Providing exceptionally reliable
protection for electrical equipment
The LP 33 40-120 UPS offers reliability at its best. The unit is equipped with a
redundant power supply ensuring the load being transferred in an instant to
the static bypass in the event of a breakdown of the power electronics.
Standards / Marking
To further increase system reliability, 2 or more units can be connected
in parallel. In this way a redundant fault tolerant system is created with
maximum availability and reliability. The decentralized bypass offers maximum
flexibility to the end-user for future expansion of the system.
Safety: EN 62040-1; EN 60950;
IEC 60950
Protection: IEC 60529
EMC: EN 62040-2 (Class A)
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Efficiency
Input power factor
Input current THDi at 20-100% load
Environment
Ambient operating temperature
Relative humidity
Audible noise
Interfacing
Software compatibility
320-460 Vac
50-60 Hz ± 10%
3x380/400/415 Vac (user selectable)
50 or 60 Hz ± 0.1% (user selectable)
93% (on ECO Mode 99%)
0.98
< 10% (< 5% optional)
IP 20 (IEC 60529)
0 to 40°C
95% non-condensing
40 kVA: <60 dB(A), 60-120 kVA: <65 dB(A), load and temperature dependent
std: RS232; 4 alarm contacts, SNMP interface (optional)
JUMP DataShield™, JUMP Manager™, IRIS
Runtime table (100% load, minutes)
LP 33 UPS model
Capacity of battery set (V/Ah)
480/22
480/33
480/50
480/66
B.16
40-33
60-33
80-33
100-33
120-33
8
12
-
9
12
19
10
12
10
9
UPS
LP 33 40-120 Series - double conversion UPS
LP 60-33
LP 80-33
LP 100-33
LP 120-33
Battery
capacity
(V/Ah)
Runtime (min)
at load
100%
Dimensions
(hxwxd, mm)
Net
weight
(kg)
Ref. No.
LP 40-33 UPS 40 kVA without battery, THDi < 10%
LP 40-33 UPS 40 kVA without battery, THDi < 5%
-
-
1400x600x725
1400x600x725
220
220
*
*
LP 60-33 UPS 60 kVA without battery, THDi < 10%
LP 60-33 UPS 60 kVA without battery, THDi < 5%
-
-
1800x600x725
1800x600x725
280
280
*
*
LP 80-33 UPS 80 kVA without battery, THDi < 10%
LP 80-33 UPS 80 kVA without battery, THDi < 5%
-
-
1800x600x725
1800x600x725
290
290
*
*
LP 100-33 UPS 100 kVA without battery, THDi < 10%
LP 100-33 UPS 100 kVA without battery, THDi < 5%
-
-
1800x725x725
1800x725x725
400 (1)
400 (1)
*
*
LP 120-33 UPS 120 kVA without battery, THDi < 10%
LP 120-33 UPS 120 kVA without battery, THDi < 5%
-
-
1800x725x725
1800x725x725
450 (1)
450 (1)
*
*
1400x430x725
1400x430x725
1800x430x725
1800x600x725
1800x600x725
1800x780x725
360
500
520
775
960
1010
*
*
*
*
*
*
1400x430x725
1800x430x725
1800x600x725
1800x780x725
300x150x200
400x200x300
600x200x400
-
95
115
140
160
-
*
*
*
*
*
*
*
*
*
*
*
RPA Redundant Parallel Architecture
Separate bypass input for LP 40-33
Separate bypass input for LP 60-33
Separate bypass input for LP 80-33
Separate bypass input for LP 100/120-33
-
*
*
*
*
*
RPA Redundant Parallel Architecture (field installed)
Extended customer interface card (6 relay contacts)
Bottom Grid for cabinet 430x725 mm
Bottom Grid for cabinet 600x725 mm
Bottom Grid for cabinet 725x725 mm
Bottom Grid for cabinet 780x725 mm
-
*
*
*
*
*
*
Seaworthy packing (also for air freights), LP 40-33
Seaworthy packing (also for air freights), LP 60/80/100/120-33
-
*
*
(1) preliminary
Battery cabinets
with batteries Battery cabinet with 480 V / 22 Ah battery for LP 40-33 with fuses
Battery cabinet with 480 V / 33 Ah battery for LP 40-33 with fuses
Battery cabinet with 480 V / 33 Ah battery for LP 60/80-33 without fuses
Battery cabinet with 480 V / 50 Ah battery for LP 60/80-33 without fuses
Battery cabinet with 480 V / 2x33 Ah battery for LP 60/80-33 without fuses
Battery cabinet with 480 V / 2x33 Ah battery for LP 100/120-33 without fuses
Battery cabinets
without batteries Battery cabinet without battery for LP 40-33 with fuses
Battery cabinet without battery for LP 60/80-33 without fuses
Battery cabinet without battery for LP 60/80-33 without fuses
Battery cabinet without battery for LP 100/120-33 without fuses
Battery fuse box for LP 40-33 with fuses
Battery fuse box for LP 60/80-33 without fuses
Battery fuse box for LP 100/120-33 without fuses
Battery fuse kit for LP 60-33
Battery fuse kit for LP 80-33
Battery fuse kit for LP 100-33
Battery fuse kit for LP 120-33
Options
mounted in
factory
Options
field installable
Options
special
Runtime selection table
LP 33 40-120 - double conversion
LP 40-33
A
B
X
Runtimes (minutes) at full load, power factor 0.8
Battery cabinet with 22 Ah battery for LP 40-33
Battery cabinet with 33 Ah battery for LP 40-33
Battery cabinet with 33 Ah battery for LP 60/80-33
Battery cabinet with 50 Ah battery for LP 60/80-33
Battery cabinet with 2x33 Ah battery for LP 60/80-33
Battery cabinet with 2x33 Ah battery for LP 100/120-33
LP 40-33
8
12
-
LP 60-33
9
12
18
-
LP 80-33
9
12
-
LP 100-33
10
LP 120-33
9
* For ordering please contact customer service.
B.17
UPS
SitePro Series - double conversion UPS
Applications
Order codes
The on-line SitePro UPS is an extremely reliable UPS providing critical power
protection for a wide range of demanding mission-critical applications such
as computer and data centers, medical facilities, broadcasting and satellite
transmission systems, manufacturing and process control units, security
systems, financial institutions, transportation infrastructure etc. etc.
Characteristics
Function
A
B
X
B.18
Providing exceptionally reliable
protection for electrical equipment
Standards / Marking
Safety: EN 50091; 62040-1-2
EMC: EN 50091-2; EN 62040-2
The SitePro family of 3-phase in / 3-phase out high-performance UPS systems
operates in a double conversion mode (providing true on-line operation), thus
providing the highest levels of power reliability. Each UPS is fully compliant with
international standards regarding Voltage and Frequency Independent (VFI)
operation. True VFI makes the GE SitePro an extremely reliable UPS for data
security and other demanding critical applications, even under the toughest
conditions.
The SitePro UPS is available in models from 10 kVA up to 500 kVA. For highpower redundant applications, the GE SitePro can be installed with up to eight
units in parallel achieving power protection up to 4 MVA. The systems are
controlled in a true peer-to-peer configuration with redundancy in all critical
elements and functions, utilizing GE’s unique Redundant Parallel Architecture™
(RPA™) technology. This advanced technology provides the highest possible
system reliability for mission critical applications with no single points of failure.
UPS
Technical specifications
Technical specifications (model dependent)
Output power rating
(kW)
kg
dB(A)
10
15
20
30
40
60
150
200
1
10
A
240
48
1
15
A
290
50
1
20
A
290
50
1
30
A
320
55
1
40
A
350
60
0.9
54
B
475
60
0.9
135
C
930
65
0.9
0.9
0.9
0.9
0.9
180 225 270 360 450
C
D
D
E
E
1000 1450 1550 2725 2950
65
68
68
70
70
250
300
400
Dimensions (hxwxd, mm):
A = 1450x680x800
B = 1450x750x800
C = 1800x1100x800
D = 1800x1550x800
E = 1800x2600x800
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Output distortion at linear load
Output distortion at non-linear load
Crest factor
Overload capability on inverter
Output voltage regulation - static
Output voltage regulation - dynamic
Overall efficiency at 100% load (double conversion mode)
Environment
Ambient operating temperature
Relative humidity
Interfacing
Battery extension
Backfeed protection
Software compatibility
320-460 Vac
45-66 Hz
3x380/400/415 Vac + N ± 1% (user selectable)
50 or 60 Hz (user selectable)
< 2%
< 3%
> 3:1
125% 10 min., 150% 1 min. (400-500 kVA 30 sec.)
± 1%
± 3%
up to 94.5%
IP 20 (IEC 60529)
0 to 40°C
95% non-condensing
std: RS232; potential free contacts, programmable relays
optional
standard available
JUMP DataShield™, JUMP Manager™, IRIS
500
SitePro - double conversion
Output power factor
Output power rating
Dimensions
Weight (without batteries)
Noise level (DIN 45630)
(kVA)
A
B
X
Runtime table 80-120 kVA (1) (100% load, minutes)
LP 33 UPS model
Capacity of battery set (V/Ah)
360 / 10
360 / 17
360 / 24
360 / 33
360 / 38
360 / 65
360 / 76
10 kVA
15 kVA
20 kVA
30 kVA
40 kVA
60 kVA
8
15
30
43
50
100
120
10
15
24
30
60
70
6
10
16
20
40
50
6
10
12
25
30
6
7
17
20
10
12
(1) For the full SitePro range (10-500 kVA) runtimes are possible from 5 minutes up to 4 hours.
Contact your dealer for customised battery solutions not mentioned in this catalogue.
B.19
UPS
SitePro Series - double conversion UPS
Order codes
SitePro 10
Battery
capacity
(V/Ah)
Runtime
(min)
at 100% load
Dimensions
(hxwxd, mm)
Net
weight
(kg)
Ref. No.
SitePro 10 kVA without battery, with 6 pulse rectifier
RPA kit installed in factory
10 Ah battery in UPS cabinet
17 Ah battery in UPS cabinet
24 Ah battery in UPS cabinet
33 Ah battery in UPS cabinet
10 Ah battery mounted in separate cabinet
17 Ah battery mounted in separate cabinet
24 Ah battery mounted in separate cabinet
38 Ah battery mounted in separate cabinet
65 Ah battery mounted in separate cabinet
2x38 Ah battery mounted in separate cabinet
Battery fuses for cabinet
Battery fuse box (with fuses)
Battery contactor mounted in UPS cabinet
Input isolation transformer mounted in UPS cabinet batt. cavity
Input filter for 5th harmonic with power factor correction,
mounted inside the batt. cavity for 50Hz
Output cabinet 4x
360/10
360/17
360/24
360/33
360/10
360/17
360/24
360/38
360/65
360/76
-
8
15
30
43
8
15
30
50
100
120
-
1450x680x800
1450x500x800
1450x500x800
1450x500x800
1450x500x800
1450x750x800
1450x1100x800
300x200x150
-
240
140
230
290
400
230
290
370
530
790
1030
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
1450x500x800
-
*
*
SitePro 15 kVA without battery, with 6 pulse rectifier
RPA kit installed in factory
17 Ah battery in UPS cabinet
24 Ah battery in UPS cabinet
33 Ah battery in UPS cabinet
17 Ah battery mounted in separate cabinet
24 Ah battery mounted in separate cabinet
38 Ah battery mounted in separate cabinet
65 Ah battery mounted in separate cabinet
2x38 Ah battery mounted in separate cabinet
Battery fuses for cabinet
Battery fuse box (with fuses)
Battery contactor mounted in UPS cabinet
Input isolation transformer mounted in UPS cabinet batt. cavity
Input filter for 5th harmonic with power factor correction,
mounted inside the batt. cavity for 50Hz
Output cabinet 4x
360/17
360/24
360/33
360/17
360/24
360/38
360/65
360/76
-
10
15
24
10
15
30
60
70
-
1450x680x800
1450x500x800
1450x500x800
1450x500x800
1450x750x800
1450x1100x800
300x200x150
-
290
230
290
400
290
370
530
790
1030
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
1450x500x800
-
*
*
SitePro 20 kVA without battery, with 6 pulse rectifier
RPA kit installed in factory
17 Ah battery in UPS cabinet
24 Ah battery in UPS cabinet
33 Ah battery in UPS cabinet
17 Ah battery mounted in separate cabinet
24 Ah battery mounted in separate cabinet
38 Ah battery mounted in separate cabinet
65 Ah battery mounted in separate cabinet
2x38 Ah battery mounted in separate cabinet
Battery fuses for cabinet
Battery fuse box (with fuses)
Battery contactor mounted in UPS cabinet
Input isolation transformer mounted in UPS cabinet batt. cavity
Input filter for 5th harmonic with power factor correction,
mounted inside the batt. cavity for 50Hz
Output cabinet 4x
360/17
360/24
360/33
360/17
360/24
360/38
360/65
360/76
-
6
10
16
6
10
20
40
50
-
1450x680x800
1450x500x800
1450x500x800
1450x500x800
1450x750x800
1450x1100x800
300x200x150
-
290
230
290
400
290
370
530
790
1030
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
1450x500x800
-
*
*
SitePro 15
A
B
X
SitePro 20
* For ordering please contact customer service.
B.20
UPS
SitePro Series - double conversion UPS
SitePro 30
Runtime
(min)
at 100% load
Dimensions
(hxwxd, mm)
Net
weight
(kg)
Ref. No.
SitePro 30 kVA without battery, with 6 pulse rectifier
RPA kit installed in factory
24 Ah battery in UPS cabinet
33 Ah battery in UPS cabinet
24 Ah battery mounted in separate cabinet
38 Ah battery mounted in separate cabinet
65 Ah battery mounted in separate cabinet
2x38 Ah battery mounted in separate cabinet
Battery fuses for cabinet
Battery fuse box (with fuses)
Battery contactor mounted in UPS cabinet
Input isolation transformer mounted in UPS cabinet batt. cavity
Input filter for 5th harmonic with power factor correction,
mounted inside the batt. cavity for 50Hz
Output cabinet 4x
360/24
360/33
360/24
360/38
360/65
360/76
-
6
10
6
12
25
30
-
1450x680x800
1450x500x800
1450x500x800
1450x750x800
1450x1100x800
300x200x150
-
320
290
400
370
530
790
1030
-
*
*
*
*
*
*
*
*
*
*
*
*
-
-
1450x500x800
-
*
*
SitePro 40kVA without battery, with 6 pulse rectifier
SitePro 40kVA without battery, prepared for 12 pulse rectifier
RPA kit installed in factory
33 Ah battery in UPS cabinet
38 Ah battery mounted in separate cabinet
65 Ah battery mounted in separate cabinet
2x38 Ah battery mounted in separate cabinet
Battery fuses for cabinet
Battery fuse box (with fuses)
Battery contactor mounted in UPS cabinet
Input isolation transformer mounted in UPS cabinet batt. cavity
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Input isolation transformer in separate cabinet
Input filter for 5th harmonic with power factor correction,
mounted inside the batt. cavity for 50Hz
Output cabinet 4x
360/33
360/38
360/65
360/76
-
6
7
17
20
-
1450x680x800
1450x680x800
1450x500x800
1450x750x800
1450x1100x800
300x200x150
1450x500x800
1450x500x800
1450x500x800
350
350
400
530
790
1030
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
1450x500x800
-
*
*
SitePro 60kVA without battery, with 6 pulse rectifier
SitePro 60kVA without battery, prepared for 12 pulse rectifier
RPA kit installed in factory
65 Ah battery mounted in separate cabinet
2x38 Ah battery mounted in separate cabinet
Battery fuses for cabinet
Battery fuse box (with fuses)
Input isolation transformer in separate cabinet
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Input filter for 5th harmonic with power factor correction,
mounted inside the batt. cavity for 50Hz
Output cabinet 4x
360/65
360/76
-
10
12
-
1450x750x800
1450x750x800
1450x750x800
1450x1100x800
400x300x200
1450x500x800
1450x500x800
1450x500x800
475
475
790
1030
-
*
*
*
*
*
*
*
*
*
*
-
-
1450x500x800
1450x1100x800
-
*
*
SitePro - double conversion
Battery
capacity
(V/Ah)
SitePro 40
A
B
X
SitePro 60
* For ordering please contact customer service.
B.21
UPS
SitePro Series - double conversion UPS
Order codes
SitePro 150
Dimensions
(hxwxd, mm)
Net
weight
(kg)
Ref. No.
SitePro 150 kVA without battery, with 6 pulse rectifier
SitePro 150 kVA without battery, prepared for 12 pulse rectifier with galv. separation
SitePro 150 kVA without battery, prepared for 12 pulse rectifier without galv. separation
RPA kit installed in factory
Input isolation transformer in separate cabinet
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Battery fuse box (with fuses)
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz
Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz
Cables for common mains (1)
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1800x1100x800
1800x1100x800
1800x1100x800
1800x680x800
1800x680x800
1800x680x800
600x400x200
925
925
925
-
*
*
*
*
*
*
*
*
1800x680x800
1800x680x800
1800x680x800
1800x680x800
1800x1100x800
1800x1100x800
1800x1550x800
-
*
*
*
*
*
*
*
*
SitePro 200 kVA without battery, with 6 pulse rectifier
SitePro 200 kVA without battery, prepared for 12 pulse rectifier with galv. separation
SitePro 200 kVA without battery, prepared for 12 pulse rectifier without galv. separation
RPA kit installed in factory
Input isolation transformer in separate cabinet
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Battery fuse box (with fuses)
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz
Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz
Cables for common mains (1)
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1800x1100x800
1800x1100x800
1800x1100x800
1800x680x800
1800x680x800
1800x680x800
600x400x200
995
995
995
-
1800x680x800
1800x680x800
1800x680x800
1800x680x800
1800x1100x800
1800x1100x800
1800x1550x800
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SitePro 250 kVA without battery, with 6 pulse rectifier
SitePro 250 kVA without battery, prepared for 12 pulse rectifier with galv. separation
SitePro 250 kVA without battery, prepared for 12 pulse rectifier without galv. separation
RPA kit installed in factory
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Battery fuse box (with fuses)
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier without galv. separation
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier with galv. separation
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz
Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz
Cables for common mains (1)
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1800x1550x800
1800x1550x800
1800x1550x800
1800x680x800
1800x1100x800
600x400x200
1450
1450
1450
-
*
*
*
*
*
*
*
1800x680x800
-
*
1800x680x800
1800x680x800
1800x680x800
1800x680x800
1800x1100x800
1800x1550x800
1800x1780x800
-
*
*
*
*
*
*
*
*
SitePro 200
A
B
X
*
*
SitePro 250
(1) In case of common mains and DCU or filter (input to UPS and bypass) order also the cables
* For ordering please contact customer service.
B.22
UPS
SitePro Series - double conversion UPS
SitePro 300
Net
weight
(kg)
Ref. No.
SitePro 300 kVA without battery, with 6 pulse rectifier
SitePro 300 kVA without battery, prepared for 12 pulse rectifier with galv. separation
SitePro 300 kVA without battery, prepared for 12 pulse rectifier without galv. separation
RPA kit installed in factory
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Battery fuse box (with fuses)
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier without galv. separation
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier with galv. separation
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz
Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz
Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz
Cables for common mains (1)
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1800x1550x800
1800x1550x800
1800x1550x800
1800x680x800
1800x1100x800
600x400x200
1550
1550
1550
-
*
*
*
*
*
*
*
1800x680x800
-
*
1800x680x800
1800x680x800
1800x680x800
1800x680x800
1800x1100x800
1800x1550x800
1800x1780x800
-
*
*
*
*
*
*
*
*
SitePro 400 kVA without battery, with 12 pulse rectifier without galv. separation
SitePro 400 kVA without battery, prepared for 12 pulse rectifier with galv. separation
RPA kit installed in factory
12 pulse rectifier with galv. separation in separate cabinet
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier without galv. separation
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier with galv. separation
Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz
Battery fuse box (with fuses)
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1800x2600x800
1800x2600x800
1800x680x800
2700
2700
-
*
*
*
*
1800x680x800
-
*
1800x680x800
1800x1100x800
1000x600x260
1800x1550x800
1800x1780x800
1800x1780x800
-
*
*
*
*
*
*
SitePro 500 kVA without battery, with 12 pulse rectifier without galv. separation
SitePro 500 kVA without battery, prepared for 12 pulse rectifier with galv. separation
RPA kit installed in factory
12 pulse rectifier with galv. separation in separate cabinet
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier without galv. separation
Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse
rectifier with galv. separation
Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz
Battery fuse box (with fuses)
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1800x2600x800
1800x2600x800
1800x1100x800
2900
2900
-
*
*
*
*
1800x680x800
-
*
1800x680x800
1800x1100x800
1000x600x260
1800x1550x800
1800x2200x800
1800x2200x800
-
*
*
*
*
*
*
SitePro - double conversion
Dimensions
(hxwxd, mm)
SitePro 400
A
B
X
SitePro 500
(1) In case of common mains and DCU or filter (input to UPS and bypass) order also the cables
* For ordering please contact customer service.
B.23
UPS
SitePro Series - double conversion UPS
Order codes
Options
miscellaneous
A
Options
battery cabinets
B
X
Dimensions
(hxwxd, mm)
Ref. No.
Kit to convert Single to RPA operation for SitePro S6 (in case of ISM please order kit “version E” below)
RPA kit factory installed, version E, required in combination with ISM
Kit to convert Single UPS to RPA operation, version E, required in combination with ISM
ISM Intelligent Synchronization Module (compatible with RPA version E)
Data cable for RPA system between unit 6 meters
Data cable for RPA system between unit 12 meters
Data cable for RPA system between unit 30 meters
Data cable for RPA system between unit 85 meters
Maxium distance between the first and the last UPS in one system is 85 meters
-
*
*
*
*
*
*
*
Additional Customer Interface card (10-500 kVA)
Remote signalling panel (incl. 24 Vdc Power Supply)
Remote monitoring system
Kit to mount Chinese Display for SitePro S6
Auxiliary Power Supply 24VDC, factory mounted only
-
Top cable entry box (10-60 kVA only)
2 bottom side grids + 1 x side panel for cabinet with factory installed batteries (10-60 kVA)
Mounting set for battery 10/17/24 AH in 10-30 kVA UPS cabinet
Mounting set for 33 Ah battery in 10-40 kVA UPS cabinet
Note: UPS without batteries are also without battery mounting sets.
To mount locally purchased batteries, order the mounting set.
-
*
*
*
*
*
Battery cabinet 500mm with 4 shelves (with 2 side panels and 2 bottom side grids) 10-40 kVA
Battery cabinet 750mm with 4 shelves (with 2 side panels and 2 bottom side grids) 10-60 kVA
Battery cabinet 1100mm with 4 shelves (with 2 side panels and 2 bottom side grids) 10-60 kVA
Note: Battery cabinets are normally mounted next to the UPS.
For remote placement, order bottom grids and side panel.
1450x500x800
1450x750x800
1450x1100x800
*
*
*
Battery cabinet 680mm with 4 shelves (3 mobile) c/w 1 x sides (150-500 kVA)
Battery cabinet 1100mm with 4 shelves (3 mobile) c/w 1 x sides (150-500 kVA)
Battery cabinet 1550mm with 4 shelves (3 mobile) c/w 1 x sides (150-500 kVA)
2 bottom side grids + 1 x side panel for cabinet (150-500 kVA)
Note: For all batteries installed on racks, it is recommended that a battery fuse box also be installed.
Note: For battery cabinets that are placed more than 3 meters from the UPS, it is recommended that a
battery fuse box (wall-mounted) or battery fuse+holder (inside battery cabinet) also be installed.
1800x680x800
1800x1100x800
1800x1550x800
-
*
*
*
*
-
*
*
*
*
Empty cabinet 500mm c/w 2 x sides and 2 x bottom grills (10-60 kVA)
Empty cabinet 750mm c/w 2 x sides and 2 x bottom grills (10-60 kVA)
Empty cabinet 1100mm c/w 2 x sides and 2 x bottom grills (10-60 kVA)
Empty cabinet 680mm c/w 2 x sides and 2 x bottom grills (150-500 kVA)
Empty cabinet 1100mm c/w 2 x sides and 2 x bottom grills (150-500 kVA)
Empty cabinet 1550mm c/w 2 x sides and 2 x bottom grills (150-500 kVA)
Note: empty cabinets are battery cabinets without battery shelves
1450x500x800
1450x750x800
1450x1100x800
1800x680x800
1800x1100x800
1800x1550x800
*
*
*
*
*
*
Active Filter 45A, 3-wire
Active Filter 45A, 3-wire with EMI Filter IEC62040-2 Class A
Active Filter 115A, 3-wire
Active Filter 115A, 3-wire with EMI Filter IEC62040-2 Class A
800x800x300
800x800x300
1820x680x800
1820x680x800
*
*
*
*
Non standard colour (per cabinet) (10-40 kVA)
Non standard colour (per cabinet) (60 kVA)
Non standard colour (per cabinet) (150-500 kVA)
-
*
*
*
Wooden crate (per cabinet) mandatory for sea and air freights (10-60 kVA)
Wooden crate (per cabinet) mandatory for sea and air freights (150-500 kVA)
Reception test in our factory (per system per day) (10-40 kVA)
Reception test in our factory (per system per day) (60-500 kVA)
-
*
*
*
*
Battery temperature sensor 5 meter
Battery temperature sensor 15 meter
Battery temperature sensor 20 meter
Battery temperature sensor 30 meter (shielded)
Options
active filter
Options
colour
Options
packing &
tests
* For ordering please contact customer service.
B.24
*
*
*
*
*
UPS
Notes
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SitePro - double conversion
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
A
B
X
B.25
UPS
SG Series - double conversion UPS
Applications
Order codes
The on-line SG series UPS is an extremely reliable UPS providing critical power
protection for a wide range of demanding mission-critical applications such
as computer and data centers, medical facilities, broadcasting and satellite
transmission systems, manufacturing and process control units, security
systems, financial institutions, transportation infrastructure etc. etc.
Characteristics
Function
A
B
X
B.26
Providing exceptionally reliable
protection for electrical equipment
Standards / Marking
Safety: EN 62040-1-1; IEC 62040-1-1
EMC: EN 62040-2
The GE Digital Energy 3-phase in / 3-phase out high-performance SG Series
is one of the best performing and most reliable three-phase UPS systems
providing critical power protection for a wide range of applications. Every SG
Series system operates in VFI mode (Voltage Frequency Independent) yielding
the maximum levels of power reliability for all mission-critical processes.
The Digital Energy SG Series was developed using GE’s Design for Six Sigma
methodology to ensure that the product fully meets customer requirements
and expectations.
With proven technology the SG Series UPS provides top class reliability and
performance. With backfeed protection and compliance to EMC standards the
SG Series complies to current and future standards. Reliability can be further
increased by paralleling up to eight UPS units utilising GE’s unique RPA™
technology (Redundant Parallel Architecture). With RPA every UPS is controlled
in a true peer-to-peer configuration with redundancy in all critical elements
and functions, eliminating all single points of failure. The decentralised bypass
offers great flexibility to up or down grade the system in case future needs
might change.
UPS
Technical specifications
Technical specifications (model dependent)
Output power rating (kW)
Dimensions
Weight (without batteries), kg
Input current THD (optional)
80
100
120
72
A
605
< 6%
90
B
830
< 6%
108
B
830
< 6%
160
144
C
1100*
< 5%
* preliminary
Dimensions, hxwxd (mm):
A = 1820x800x800
B = 1820x1200x800
C = 1820x1650x800
Technical specifications (general)
Input voltage range
Input frequency range
Output voltage
Output frequency
Output power factor
Output voltage THD at linear load
Output voltage THD at non-linear load
Overload capability on inverter
Output voltage regulation - static
Output voltage regulation - dynamic (100% step load)
System efficiency
Protection degree
Ambient operating temperature
Relative humidity
Interfacing
Battery extension
Backfeed protection
Software compatibility
320-460 Vac
45-65 Hz
3x380/400/415 Vac (user selectable)
50 or 60 Hz ± 0.01% (user selectable)
0.9
< 1%
< 3%
125% 10 min., 150% 1 min.
< ± 1%
< ± 2% (recovery time < 20 ms)
98% on super ECO mode
IP 20
0 to 40°C
95% non-condensing
std: RS232; potential free contacts, programmable relays
optional
standard available
JUMP DataShield™, JUMP Manager™, IRIS
200
180
C
1300*
< 5%
SG Series - double conversion
Output power rating (kVA)
A
B
X
Runtime table 80-120 kVA (1) (100% load, minutes)
SG Series model
Capacity of battery set (V/Ah)
360 / 1x75
360 / 1x82
360 / 2x92
360 / 1x130
360 / 2x130
360 / 3x110
360 / 3x130
80 kVA
100 kVA 120 kVA
6
11
33
(2)
(2)
8
5
(2)
(2)
(2)
15
47
63
(2)
10
30
(2)
48
61
(2)
46
(1) For the full SG Series range (80-200 kVA) runtimes are possible from 5 minutes up to 3-4 hours.
Contact your dealer for customised battery solutions not mentioned in this catalogue.
(2) This combination of battery set / UPS model is not available.
B.27
UPS
SG Series - double conversion UPS
SG 80
Order codes
SG 80 kVA without battery, with 6 pulse rectifier
SG 80 kVA without battery, with 6 pulse rectifier, with Class A EMI filter
SG 80 kVA without battery, prepared for 12 pulse rectifier
SG 80 kVA without battery, prepared for 12 pulse rectifier, with Class A EMI filter
RPA kit installed in factory
5th harmonic filter in UPS cabinet for THDi < 8%
5th and 11th harmonic filter in UPS cabinet for THDi < 6%
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Input isolation transformer in separate cabinet
Battery fuse box (without fuses)
Battery fuses for SG 80 kVA
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
A
Battery solutions, 10 year lifetime, matching cabinets (1)
Battery 1x75 Ah, runtime 6 minutes
Battery 1x82 Ah, runtime 11 minutes
Battery 2x92 Ah, runtime 33 minutes
Battery 2x130 Ah, runtime 47 minutes
Battery 3x110 Ah, runtime 63 minutes
Dimensions
(hxwxd, mm)
Net
weight
(kg)
Ref. No.
1820x800x800
1820x800x800
1820x800x800
1820x800x800
1820x500x800
1820x500x800
1820x500x800
600x400x200
1820x800x800
1820x800x800
1820x800x800
605
605
605
605
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
1x 1820x1200x800
1x 1820x1200x800
2x 1820x1200x800
2x 1820x1650x800
3x 1820x1200x800
990
1170
2460
3360
4230
*
*
*
*
*
1820x1200x800
1820x1200x800
1820x1200x800
1820x1200x800
1820x500x800
1820x500x800
1820x500x800
600x400x200
1820x800x800
1820x800x800
1820x800x800
830
830
830
830
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
1x 1820x1200x800
1x 1820x1650x800
2x 1820x1200x800
3x 1820x1200x800
3x 1820x1650x800
1170
1680
2820
4230
5040
*
*
*
*
*
1820x1200x800
1820x1200x800
1820x1200x800
1820x1200x800
1820x500x800
1820x500x800
1820x500x800
600x400x200
1820x800x800
1820x800x800
1820x800x800
830
830
830
830
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
1x 1820x1200x800
1x 1820x1650x800
2x 1820x1650x800
3x 1820x1650x800
4x 1820x1650x800
1170
1680
3360
5040
6720
*
*
*
*
*
SG 100
SG 100 kVA without battery, with 6 pulse rectifier
SG 100 kVA without battery, with 6 pulse rectifier, with Class A EMI filter
SG 100 kVA without battery, prepared for 12 pulse rectifier
SG 100 kVA without battery, prepared for 12 pulse rectifier, with Class A EMI filter
RPA kit installed in factory
5th harmonic filter in UPS cabinet for THDi < 8%
5th and 11th harmonic filter in UPS cabinet for THDi < 6%
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Input isolation transformer in separate cabinet
Battery fuse box (without fuses)
Battery fuses for SG 100 kVA
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
B
X
Battery solutions, 10 year lifetime, matching cabinets (1)
Battery 1x82 Ah, runtime 8 minutes
Battery 1x130 Ah, runtime 15 minutes
Battery 2x110 Ah, runtime 31 minutes
Battery 3x110 Ah, runtime 48 minutes
Battery 3x130 Ah, runtime 61 minutes
SG 120
SG 120 kVA without battery, with 6 pulse rectifier
SG 120 kVA without battery, with 6 pulse rectifier, with Class A EMI filter
SG 120 kVA without battery, prepared for 12 pulse rectifier
SG 120 kVA without battery, prepared for 12 pulse rectifier, with Class A EMI filter
RPA kit installed in factory
5th harmonic filter in UPS cabinet for THDi < 8%
5th and 11th harmonic filter in UPS cabinet for THDi < 6%
12 pulse rectifier without galv. separation in separate cabinet
12 pulse rectifier with galv. separation in separate cabinet
Input isolation transformer in separate cabinet
Battery fuse box (without fuses)
Battery fuses for SG 120 kVA
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
Battery solutions, 10 year lifetime, matching cabinets (1)
Battery 1x82 Ah, runtime 5 minutes
Battery 1x130 Ah, runtime 10 minutes
Battery 2x130 Ah, runtime 30 minutes
Battery 3x130 Ah, runtime 46 minutes
Battery 4x130 Ah, runtime 66 minutes
(1) All runtimes based on nominal load, PF 0.8
* For ordering please contact customer service.
B.28
UPS
SG Series - double conversion UPS
SG 160
Net
weight
(kg)
SG 160 kVA without battery, with 6 pulse rectifier
SG 160 kVA without battery, with 6 pulse rectifier, with Class A EMI filter
RPA kit installed in factory
5th harmonic filter in UPS cabinet for THDi < 8%
5th and 11th harmonic filter in UPS cabinet for THDi < 6%
Input isolation transformer in separate cabinet
Battery fuse box (without fuses)
Battery fuses for SG 160 kVA
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1820x1650x800
1820x1650x800
1820x680x800
600x400x200
1820x800x800
1820x800x800
1820x800x800
1100
1100
-
SG 200 kVA without battery, with 6 pulse rectifier
SG 200 kVA without battery, with 6 pulse rectifier, with Class A EMI filter
RPA kit installed in factory
5th harmonic filter in UPS cabinet for THDi < 8%
5th and 11th harmonic filter in UPS cabinet for THDi < 6%
Input isolation transformer in separate cabinet
Battery fuse box (without fuses)
Battery fuses for SG 200 kVA
Output cabinet 2x
Output cabinet 3x
Output cabinet 4x
1820x1650x800
1820x1650x800
1820x680x800
600x400x200
1820x800x800
1820x800x800
1820x800x800
1300
1300
-
Ref. No.
*
*
*
*
*
*
*
*
*
*
*
SG 200
*
*
*
*
*
*
*
*
*
*
*
Options
miscellaneous
Options
battery cabinets
Options
colour
Options
packing &
tests
A
B
RPA kit factory installed, version E, required in combination with ISM
Kit to convert Single UPS to RPA operation, version E, required in combination with ISM
ISM Intelligent Synchronization Module (compatible with RPA version E)
Data cable for RPA system between unit 6 meters
Data cable for RPA system between unit 12 meters
Data cable for RPA system between unit 30 meters
Data cable for RPA system between unit 85 meters
Maxium distance between the first and the last UPS in one system is 85 meters
-
*
*
*
*
*
*
*
Additional Customer Interface card
Remote signalling panel (incl. 24 Vdc Power Supply)
Remote monitoring system
Auxiliary Power Supply 24VDC, factory mounted only
-
*
*
*
*
1820x800x800
1820x1200x800
820x1650x800
-
*
*
*
*
*
*
*
*
*
*
800x800x300
800x800x300
1820x680x800
1820x680x800
*
*
*
*
Non standard colour 80-120 kVA (per cabinet)
Non standard colour 160-200 kVA (per cabinet)
-
*
*
Wooden crate (per cabinet) mandatory for sea and air freights 80-120 kVA
Wooden crate (per cabinet) mandatory for sea and air freights 160-200 kVA
Reception test in our factory (per system per day)
-
*
*
*
Empty battery cabinet 800mm
Empty battery cabinet 1200mm
Empty battery cabinet 1650mm
Battery fuse holder and bracket (to be mounted in batt. cabinet in case of no batt, fuse box)
Battery temperature sensor 5 meter
Battery temperature sensor 15 meter
Battery temperature sensor 20 meter
Battery temperature sensor 30 meter (shielded)
Battery temperature sensor 60 meter (shielded)
Options
active filter
SG Series - double conversion
Dimensions
(hxwxd, mm)
Active Filter 45A, 3-wire
Active Filter 45A, 3-wire with EMI Filter IEC62040-2 Class A
Active Filter 115A, 3-wire
Active Filter 115A, 3-wire with EMI Filter IEC62040-2 Class A
X
* For ordering please contact customer service.
B.29
UPS
STS - Static Transfer Switch
Applications
Order codes
Static Transfer Switches (STS) are designed to transfer the supply between
two independent AC power sources. Unlike traditional automatic transfer
switches (ATS), a static transfer switch provides a fast load transfer (typically
1/4 of a cycle), which ensures uninterrupted operation of sensitive electronic
equipment. Load retransfer to the preferred input source is virtually
instantaneous (typically 0.1 ms). The basic applications of STS are in automatic
systems in the power industry, power supply systems for petrochemical
industry, computer and telecommunication centres, automatic and security
systems of ‘intelligent’ buildings as well as other equipment which is sensitive
to interruptions in the supply.
Characteristics
Function
A
B
X
Providing exceptionally reliable
protection for electrical equipment
Standards / Marking
Safety: EN 60950
EMC: EN 50022 level B,
EN 60555-2-3
The excellent overload capability and transfer algorithm enables fast fuse
clearance in the event of a short-circuit. As a consequence the voltage
immediately returns to normal to supply the other loads. The built-in transient
voltage surge suppression system for SCR switches provides additional
protection against damage to the supplied equipment.
The static transfer switch consists of two bidirectional thyristor switches for
each phase equipped with a control and protection system. The 2 or 4 pole
types have an additional neutral line switch. After failure of the preferred
source, the STS checks the state of the alternate power source and transfers
the load to whichever source provides power within selectable limits. This
transfer can be triggered by disturbance in the preferred source voltage,
overcurrent in the source or manual or remote change of the preferred
source. With both sources in limits and synchronised (phase error within the
acceptable range), manual or remote transfer is performed in less than 200 μs.
Transfers initiated by fault conditions in the preferred source depend on the
status of the alternate source. For synchronised power sources with phase
error within the limits, transfer to an alternate source is made within 6ms delay.
Lack of synchronisation causes delay before transfer. It is possible to set the
delay with dipswitches.
Technical specifications (general)
Nominal input voltage
Input voltage window
Nominal input frequency
Input frequency range
Efficiency
Crest factor acceptance
Power factor (max. cos phi)
Ambient operating temperature
Relative humidity
Altitude
Cooling
Audible noise
EMC
Protection
B.30
400 Vac ph-ph / 230 Vac ph-N
nominal -25% +20%
50 Hz
nominal -9% + 6%
> 99% at cos phi 0.8
3.5
0.5 - 1.0 (leading/lgging)
0 to 40°C
95% non-condensing
1000 m (above 1000 m 5% derating per 500 m; max. 3000 m)
redundant cooling fans
<55 dB(A)
EN 50022 level B, EN 60555-2-3
IP20 (floorstanding), IP 00 (rackmount models)
UPS
STS - Static Transfer Switch
1-phase, 1-pole
stand alone
1-phase, 2-pole
stand alone
1-phase, 2-pole
19“ rackmount
3-phase, 3-pole
floorstanding
3-phase, 3-pole
19“ rackmount
3-phase, 4-pole
floorstanding
3-phase, 4-pole
19“ rackmount
Current
Dimensions
(hxwxd, mm)
Ref. No.
Static Transfer Switch STS-230-25-1P
Static Transfer Switch STS-230-40-1P
Static Transfer Switch STS-230-63-1P
Static Transfer Switch STS-230-100-1P
Static Transfer Switch STS-230-150-1P
Static Transfer Switch STS-230-250-1P
Static Transfer Switch STS-230-400-1P
230
230
230
230
230
230
230
25
40
63
100
150
250
400
340x507x440
340x507x440
340x507x440
1100x800x400
1100x800x400
1900x800x500
1900x800x500
*
*
*
*
*
*
*
Static Transfer Switch STS-230-25-1P-RM
Static Transfer Switch STS-230-40-1P-RM
Static Transfer Switch STS-230-63-1P-RM
Manual Bypass for STS-230-25-1P-RM
Manual Bypass for STS-230-40/63-1P-RM
230
230
230
230
230
25
40
63
25
63
133.5x483x415
133.5x483x415
133.5x483x415
133.5x483x197
133.5x483x197
*
*
*
*
*
Static Transfer Switch STS-230-25-2P
Static Transfer Switch STS-230-40-2P
Static Transfer Switch STS-230-63-2P
Static Transfer Switch STS-230-100-2P
Static Transfer Switch STS-230-150-2P
Static Transfer Switch STS-230-250-2P
Static Transfer Switch STS-230-400-2P
230
230
230
230
230
230
230
25
40
63
100
150
250
400
340x507x440
340x507x440
340x507x440
1100x800x400
1100x800x400
1900x800x500
1900x800x500
*
*
*
*
*
*
*
Static Transfer Switch STS-230-25-2P-RM
Static Transfer Switch STS-230-40-2P-RM
Static Transfer Switch STS-230-63-2P-RM
Manual Bypass for STS-230-25-2P-RM
Manual Bypass for STS-230-40/63-2P-RM
230
230
230
230
230
25
40
63
25
63
133.5x483x415
133.5x483x415
133.5x483x415
133.5x483x197
133.5x483x197
*
*
*
*
*
Static Transfer Switch STS-400-25-3P
Static Transfer Switch STS-400-40-3P
Static Transfer Switch STS-400-63-3P
Static Transfer Switch STS-400-100-3P
Static Transfer Switch STS-400-150-3P
Static Transfer Switch STS-400-250-3P
Static Transfer Switch STS-400-400-3P
Static Transfer Switch STS-400-630-3P
Static Transfer Switch STS-400-800-3P
Static Transfer Switch STS-400-1000-3P
400
400
400
400
400
400
400
400
400
400
25
40
63
100
150
250
400
630
800
1000
1100x800x400
1100x800x400
1100x800x400
1100x800x400
1900x800x500
1900x800x500
1900x1200x500
2100x1200x600
2300x1600x800
2300x1600x800
*
*
*
*
*
*
*
*
*
*
Static Transfer Switch STS-400-25-3P-RM
Static Transfer Switch STS-400-40-3P-RM
Static Transfer Switch STS-400-63-3P-RM
Static Transfer Switch STS-400-100-3P-RM
400
400
400
400
25
40
63
100
710x483x465
710x483x465
710x483x465
710x483x465
*
*
*
*
Static Transfer Switch STS-400-25-4P
Static Transfer Switch STS-400-40-4P
Static Transfer Switch STS-400-63-4P
Static Transfer Switch STS-400-100-4P
Static Transfer Switch STS-400-150-4P
Static Transfer Switch STS-400-250-4P
Static Transfer Switch STS-400-400-4P
Static Transfer Switch STS-400-630-4P
Static Transfer Switch STS-400-800-4P
Static Transfer Switch STS-400-1000-4P
400
400
400
400
400
400
400
400
400
400
25
40
63
100
150
250
400
630
800
1000
1100x800x400
1100x800x400
1100x800x400
1900x800x500
1900x1200x500
1900x1200x500
2100x1200x600
2300x1200x600
2300x1600x800
2300x1600x800
*
*
*
*
*
*
*
*
*
*
Static Transfer Switch STS-400-25-4P-RM
Static Transfer Switch STS-400-40-4P-RM
Static Transfer Switch STS-400-63-4P-RM
400
400
400
25
40
63
710x483x465
710x483x465
710x483x465
*
*
*
STS - Static Transfer Switch
1-phase, 1-pole
19“ rackmount
Voltage
A
B
X
Options
MODBUS RS485 interface
Seaworthy packing (also for air freights) 25-100A
Seaworthy packing (also for air freights) 150-250A
Seaworthy packing (also for air freights) 400-630A
*
*
*
*
* For ordering please contact customer service.
B.31
UPS
Connectivity solutions
Applications
Order codes
In today’s business environment, a power failure causes loss of crucial data,
expensive down time and damaged computers or industrial equipment.
With the use of appropriate monitoring and management software, the
UPS becomes a comprehensive power quality solution. The software is an
indispensable and fully integrated element, increasing system availability and
process protection.
IRIS
Characteristics
During a power failure, the software takes a number of actions: users
are alerted, processes are managed into defined statuses, open files and
communication links are closed and unattended systems are shut down in a
controlled way. When the mains power returns, the system is automatically
started up and begins operating.
Function
A
B
Turning the UPS in to a comprehesive
power quality solution, thus providing
increased system availability and
process protection.
X
Protection software
The main function of the GE protection software is data and operating system
protection. JUMP DataShield™ diminishes the risk of lost data or system
crashes. The software provides events handling and computer shutdown for
all major operating systems, protecting the security of precious data. Multivendor and multi-platform environments as well as client-server structures are
managed, using SNMP-based network communication protocols.
Management software
JUMP DataShield
JUMP Manager
B.32
The GE UPS management software provides direct access to remote UPS and
active management of each UPS in multi-unit configurations to ensure efficient
and predictable power quality. A network manager or facilities engineer can
use JUMP Manager™ to monitor and control the local or remote UPS, and the
equipment and processes it protects. Typically, an SNMP connection, direct
serial link or modem connection is used for this purpose. The UPS can also be
monitored on the Internet using the GE IRIS system.
UPS
Connectivity solutions
Code reference
table
Related cable
UPS interface / functionality
cs
cp
i
IMV-C or VIC-25
contact shutdown adapter
IMV-I or VIC-23
contact / power failure, battery low & shutdown
contact / power failure, battery low & shutdown
intelligent / features depend on UPS type
This free software (on CD-ROM) and an intelligent communication cable are shipped with each UPS (except SitePro/SG Series UPS)
Additional copies of this software can be ordered, all software is without cabling.
Medium
Operating system
CD-ROM
Microsoft Windows (all)
Novell Netware
IBM OS/2
Linux
AT&T Intel
COMPAQ Tru64 Unix
DEC UNIX AXP Alpha
DEC Ultrix RISC
DEC OpenVMS VAX/AXP
HP-UX 700/800
IBM AIX RISC/60x
UNIXWARE INTEL
SCO INTEL
Siemens SINIX RM
SUN OS SPARC
All OS supporting JAVA 1.2 +
Code
Ref. No.
cp,i
cs,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
cp,i
i
909227
A
B
The CD-ROM contains UPS Protection and Management Program, incl.
SNMP Agent and Client.
For detailed information on compatibility for the various versions please
refer to detailed specifications.
Service
software
JUMP
manager
Windows all (Intel)
PowerFLAG SerVICe on CD-ROM
Product
Connectivity Solutions
Network
protection
software
Code
X
i
912473
code
Ref. No.
i
909227
911162
911163
911164
912316
Free to use with max. 2 single UPS or 2 complete parallel configurations,
no limitation of managed power
JUMP Manager on CD-ROM
License for more than 2 UPS systems and max. 100 kVA managed power
License for more than 2 UPS systems and max. 1000 kVA managed power
License for more than 2 UPS systems and unlimited managed power
SSL security internet communication module
ARGUS
management
software for
SitePro UPS
Product
Free to use with max. 1 single UPS. Compatible with Windows 9.x
ARGUS Software Package 30 days full featured license
License for 2 to 10 single UPSs
License for more than 10 single UPSs
License for more than 1 parallel UPS system
License for unlimited number of single & parallel UPS system
Intelligent Energy Management (IEM), only for parallel units (order also 911382)
911382
911003
915655
911004
915656
911005
B.33
UPS
Connectivity solutions
Code reference
table
Order codes
IRIS
software
Accessories
hardware
interfaces
A
B
X
Code
Related cable
UPS interface / functionality
cs
cp
i
IMV-C or VIC-25
contact shutdown adapter
IMV-I or VIC-23
contact / power failure, battery low & shutdown
contact / power failure, battery low & shutdown
intelligent / features depend on UPS type
Product
Ref. No.
Starter Kit (incl. 1st year fee and InterLinc box)
IRIS starter kit, per system, incl. messaging and refresh
911176
After 1st year (excl. InterLinc box)
IRIS yearly fee after 1st year, incl. messaging and refresh
911167
Contact UPS Relay-Box
Contact UPS Splitter-Box 2-way
Contact UPS Splitter-Box 4-way
Contact UPS Alarm-Box
Contact UPS Shutdown Adapter
UPS Service Box (1)
SNMP/Web Interface Card UTP for Match (19”) (2), NetPro (19”), LP-11/31T/31
Advanced SNMP/Web Interface card UTP/BNC for LP-33, SitePro Series 6 and SG Series
SNMP/Web Interface Box Ethernet UTP/BNC (1)
for Match (19”), NetPro (19”), LP-11/31(T); With Linc-box also valid for SitePro Series 5
Relay card for Match 700L-1500 (3) and Match 19” 1000-1500 (3)
Relay card for Match (19”) 2200-3000, NetPro (19”) and LP-11/31(T)
Multi Serial Board (8 x RS232) (1)
Analogue modem for IRIS (1) (Only valid for European market)
Converter RS232-RS485 kit (1) (4)
USB2Serial adaptor pack
(1)
(2)
(3)
(4)
Accessories
hardware
interfaces for
SitePro
code
c
cs
cs
c
cs
cs,i
i
i
912466
912467
909226
912214
912460
912468
909224
911701
cs,i
i
i
i
909223
912459
912458
901145
917641
911227
901240
i
i
i
911249
911483
916276
916275
These products are delivered including cable(s).
Not for Match 500-700 and Match 19” 700; alternative: SNMP Box, Art.no. 909223
Not for Match 500-700 and Match 19” 700; alternative: Relay Box, Art.no. 912466
Not needed if ESI is installed. Only if distance is more than 15m
External Signal Interface (ESI)
Linc Box: CP4 Protocol Converter*
Modbus RTU Interface RS 232 * (Match-NetPro-LP-SitePro-SG Series)
Modbus RTU Interface RS 485 * (Match-NetPro-LP-SitePro-SG Series)
* These products are delivered including cable(s).
Accessories
cable kits
adapters
ML Series Connectivity Cable (1.5m)
AC Cable 10A IEC320 male / female, 1.5 m
IMV-I Cable Intelligent UPS (2m) for LP and SitePro
VIC-23 Cable Intelligent UPS (2m) for Match and NetPro
IMV-C Cable Kit Contact UPS (2m)
VIC-32 Cable UPS to modem (2m) for Match and NetPro
IMV-M Cable UPS to modem (2m) for LP and SitePro Series 6
Adapter 9p male -> 25p female subd
IBM AS400 Cable Kit for built-in UPS driver (2m)
Note: length of all cables is 2 meters
B.34
i
i
i
cs
i
i
c,cs,i
c
914341
915170
912469
909231
912470
912471
912472
909225
909230
Uninterruptible Power Supplies
Introduction
Order codes
X
Numerical Index
X.1
UPS
A
B
X
X.2
Ref. No.
Page
Ref. No.
Page
901145
B.34
912444
B.7
901240
B.34
912445
B.7
909223
B.34
912446
B.7
909224
B.34
912447
B.7
909225
B.34
912449
B.7
909226
B.34
912450
B.7
909227
B.33
912451
B.7
909227
B.33
912452
B.7
909230
B.34
912453
B.5
909231
B.34
912454
B.5
910042
B.7
912458
B.34
910043
B.7
912459
B.34
910044
B.7
912460
B.34
911003
B.33
912466
B.34
911004
B.33
912467
B.34
911005
B.33
912468
B.34
911162
B.33
912469
B.34
911163
B.33
912470
B.34
911164
B.33
912471
B.34
911167
B.34
912472
B.34
911176
B.34
912473
B.33
911227
B.34
914341
B.34
911249
B.34
914850
B.5
911382
B.33
914851
B.5
911483
B.34
915170
B.34
911701
B.34
915571
B.5
912214
B.34
915572
B.5
912316
B.33
915573
B.7
912321
B.5
915655
B.33
912322
B.5
915656
B.33
912323
B.5
916181
B.3
912324
B.5
916182
B.3
912325
B.5
916183
B.3
912326
B.5
916184
B.3
912328
B.5
916275
B.34
912329
B.5
916276
B.34
912330
B.5
917641
B.34
912331
B.5
912332
B.7
912333
B.7
912334
B.7
912335
B.7
912336
B.7
912337
B.7
912338
B.7
912339
B.7
912340
B.7
912341
B.7
912342
B.7
912343
B.7
912344
B.7
912345
B.7
912346
B.7
912347
B.7
912348
B.7
912349
B.3
912349
B.5
912349
B.7
912439
B.5
912440
B.5
912441
B.5
The policy of GE Consumer &
Industrial is one of continuous
improvement.
The right is reserved to alter the
design or any structural details of
the products at any time without
giving notice.
September 2005
GE Consumer & Industrial
UPS
Notes
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
A
B
X
X.3
UPS
Notes
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
A
B
X
X.4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
35777
GE Consumer & Industrial
Power Protection
Power Protection (formerly GE Power Controls),
a division of GE Consumer & Industrial,
is a first class European supplier of
low-voltage products including wiring
devices, residential and industrial electrical
distribution components, automation
products, enclosures and switchboards.
Demand for the company’s products
comes from wholesalers, installers,
panel-board builders, contractors, OEMs
and utilities worldwide
www.gepowercontrols.com
GE POWER CONTROLS
International Sales
Nieuwevaart 51
B-9000 Gent - Belgium
Tel.
+32/9 265 21 11
Fax
+32/9 265 28 90
E-mail: gepcbel@gepc.ge.com
GE POWER CONTROLS
Hornhouse Lane
Knowsley Industrial Park
Liverpool L33 7YQ
United Kingdom
Tel.
0800/587 1251
Fax
0800/587 1239
E-mail: gepcuk@gepc.ge.com
GE imagination at work
680863
Ref. I/3184/E/EX 5.0 Ed. 09/05
© Copyright GE Consumer & Industrial 2005
All specifications subject to change without prior notice