t719.book Page 1 Thursday, June 29, 2006 1:44 PM
SGH-t719
P O R T A B L E
Q u a d - B a n d
T E L E P H O N E
User Guide
Please read this guide before operating your
phone, and keep it for future reference.
t719.book Page 2 Thursday, June 29, 2006 1:44 PM
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws,
state laws, and international treaty provisions. Intellectual Property includes, but
is not limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured
by the Intellectual Property. Moreover, you agree that you will not (and will not
attempt to) modify, prepare derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its
suppliers.
Samsung Telecommunications America (STA),
Inc.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2006 Samsung Telecommunications America, Inc. is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Printed in Korea.
GH68-08581A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
2
t719.book Page 3 Thursday, June 29, 2006 1:44 PM
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES
THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE
PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT
PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
3
t719.book Page 4 Thursday, June 29, 2006 1:44 PM
Table of Contents
Section 1: Getting Started ............................................................... 9
Activating Your Phone .................................................................................... 9
Switching the Phone On or Off ..................................................................... 13
Setting Up Your Voice Mail .......................................................................... 13
Section 2: Your Phone ................................................................... 15
Features of Your Phone ................................................................................
View of Your Phone ......................................................................................
Keys ..............................................................................................................
Display Layout ..............................................................................................
15
16
17
20
Section 3: Call Functions ............................................................... 23
Making a Call ...............................................................................................
Adjusting the Call Volume ............................................................................
Answering a Call ..........................................................................................
Accessing Call Records ................................................................................
Switching To Silent Mode ............................................................................
Selecting Functions and Options ..................................................................
23
25
26
27
30
31
Section 4: Menu Navigation .......................................................... 39
Menu Navigation .......................................................................................... 39
Menu Outline ................................................................................................ 41
Section 5: How to Enter Text ......................................................... 43
Changing the Text Input Method .................................................................
Understanding Keypad Functions .................................................................
Using the Multi-tap Input Method ...............................................................
Using the Speedy word Input Method .........................................................
Entering Numbers and Special Characters ..................................................
4
43
45
46
47
48
t719.book Page 5 Thursday, June 29, 2006 1:44 PM
Section 6: Phonebook .................................................................... 49
Storing a Contact ..........................................................................................
Finding a Contact ..........................................................................................
Speed Dialing ................................................................................................
Managing Caller Groups ...............................................................................
Copying all SIM Phonebook Entries ..............................................................
Deleting all of the Phonebook Entries ..........................................................
Creating My Name Card ...............................................................................
Setting My Own Phone Number ...................................................................
Checking the Memory Status ........................................................................
49
52
55
56
57
58
59
59
60
Section 7: Messages ..................................................................... 61
Composing and Sending a BlackBerry Email ................................................
Composing and Sending a Text Message ....................................................
Composing and Sending a Picture Message ................................................
Sending a Voice Note Message ...................................................................
Composing and Sending a PIN message ......................................................
Accessing Messages ....................................................................................
Using Text Templates ...................................................................................
Searching for Messages ...............................................................................
62
63
65
67
68
70
75
76
Section 8: Other Messaging .......................................................... 77
Voice Mail ..................................................................................................... 78
Broadcast Messages (SIM dependent) ......................................................... 78
Instant Messaging ........................................................................................ 79
Section 9: Settings ........................................................................ 83
Changing Settings .........................................................................................
Time & Date Settings ....................................................................................
Phone Settings ..............................................................................................
Display Settings ............................................................................................
Sound Settings ..............................................................................................
Network Service Settings .............................................................................
Table of Contents
83
84
85
87
90
93
5
t719.book Page 6 Thursday, June 29, 2006 1:44 PM
Bluetooth ...................................................................................................... 98
Security Settings ........................................................................................ 100
Voice Recognition Settings ........................................................................ 102
Reset Settings ............................................................................................ 104
Message Settings ...................................................................................... 105
Section 10: Using BlackBerry Email ............................................ 113
Setting Up BlackBerry Internet Email .........................................................
Managing BlackBerry Internet Email .........................................................
Setting Up BlackBerry Enterprise Server ...................................................
Synchronizing Calendar and Contacts ........................................................
Troubleshooting ..........................................................................................
114
117
118
123
126
Section 11: Applications .............................................................. 131
Recording Voice Notes ...............................................................................
Using the Calendar .....................................................................................
Using Alarm ................................................................................................
Using File Manager ....................................................................................
Using Calculator .........................................................................................
Playing Games ............................................................................................
Using Voice Recognition ............................................................................
Viewing World time ...................................................................................
Using a Unit Conversion .............................................................................
Using the Timer ..........................................................................................
Using the Stopwatch ..................................................................................
Setting Up BlackBerry Email Service .........................................................
Accessing Get More Help ..........................................................................
132
134
139
141
148
149
150
154
155
156
157
157
158
Section 12: Camera and Camcorder ........................................... 159
Taking a Photo ............................................................................................ 159
Recording a Video ...................................................................................... 163
Accessing Photos or Videos ....................................................................... 166
6
t719.book Page 7 Thursday, June 29, 2006 1:44 PM
Section 13: t-zones ...................................................................... 171
Accessing the Homepage of t-zones ..........................................................
Using Favorites ............................................................................................
Accessing a Website by Entering a URL address .......................................
Clearing the Cache ......................................................................................
171
174
175
176
Section 14: Health and Safety Information ................................. 177
Exposure to Radio Frequency (RF) Signals ..................................................
Consumer Information on Wireless Phones ...............................................
Road Safety .................................................................................................
Operating Environment ...............................................................................
Using Your Phone Near Other Electronic Devices ......................................
Potentially Explosive Environments ............................................................
Emergency Calls ..........................................................................................
FCC Notice and Cautions ............................................................................
Other Important Safety Information ............................................................
Product Performance ...................................................................................
Availability of Various Features/Ring Tones ..............................................
Battery Standby and Talk Time ...................................................................
Battery Precautions .....................................................................................
Care and Maintenance ................................................................................
178
180
189
191
191
193
193
195
196
197
198
199
199
201
Section 15: Warranty Information ............................................... 203
Standard Limited Warranty ......................................................................... 203
Section 16: RIM Legal Disclaimer and Safety Information ........ 209
Legal Disclaimer .......................................................................................... 209
Safety Information ...................................................................................... 210
Index ............................................................................................ 213
Table of Contents
7
t719.book Page 8 Thursday, June 29, 2006 1:44 PM
8
t719.book Page 9 Thursday, June 29, 2006 1:44 PM
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Switching the Phone On or Off
• Setting Up Your Voice Mail
This section describes how to start using your phone by activating your
service and setting up your Voice Mail and BlackBerry Email service.
Activating Your Phone
When you subscribe to a cellular network, you are provided with a plug-in
SIM card loaded with your subscription details, such as your PIN, any
optional services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged by
scratching or bending, so be careful when handling, inserting, or removing the
card. Keep all SIM cards out of reach of small children.
If necessary, switch off the phone by pressing and holding the
the power-off image displays.
key until
Section 1: Getting Started
9
t719.book Page 10 Thursday, June 29, 2006 1:44 PM
1. Remove the battery.
To do so, press and hold the release button at the bottom of the
battery using your thumb (1) and gently lift it in the direction of the
arrow (2). Remove the battery.
2. Make sure the gold contacts of the card face into the phone, then
slide the SIM card into the socket.
Note: When you need to remove the SIM card, slide it, as shown, and take
it out of the socket.
10
t719.book Page 11 Thursday, June 29, 2006 1:44 PM
Activating Your Phone
3. Replace the battery. Place the three tabs into the three holes
located on the back of the phone (1). Press the battery into place
(2).
Make sure that the battery is properly installed before switching on
the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel adapter
comes with your phone for charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for further details.
You can use the phone while the battery is charging, but this causes the
phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the first time.
A discharged battery recharges fully in approximately 2 hours.
1. With the battery in position in the phone, plug the connector of the
travel adapter into the jack at the bottom of the phone.
Section 1: Getting Started
11
t719.book Page 12 Thursday, June 29, 2006 1:44 PM
2. Plug the travel adapter into a standard AC wall outlet.
Note: For connection to an electrical supply not located in the U.S., you
must use an adapter of the proper configuration for the power outlet. Use of
the wrong adapter could damage your phone and void your warranty.
3. When charging is finished, unplug the travel adapter from the
power outlet and disconnect it from the phone by pressing the
buttons on both sides of the connector (1) and pulling the connector
out (2).
Note: You must unplug the travel adapter before you remove the battery
from the phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a
warning tone sounds and the “Warning low battery” message repeats at
regular intervals on the display. When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone automatically turns off.
12
t719.book Page 13 Thursday, June 29, 2006 1:44 PM
Switching the Phone On or Off
Switching the Phone On or Off
1. Open the phone.
2. Press and hold the
key until the phone switches on.
3. If the phone is locked, enter the phone password and press the OK
soft key or
.
Note: The password is preset to 00000000 at the factory. To change this
password, see "Change password" on page 101.
4. If the phone asks for a PIN, enter the PIN and press the OK soft key
or
. For further details, see "PIN check" on page 100.
The phone searches for your network and after finding it, the Idle
screen appears. Now, you can make or receive calls.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For further details, see "Language" on page
85.
5. To switch off the phone, press and hold the
power-off image displays.
key until the
Setting Up Your Voice Mail
Follow the instructions below to set up Voice Mail:
1. Open your phone to access the keypad.
2. In Idle mode, press and hold
on the keypad.
3. Follow the tutorial to create a password, a greeting, and your
name.
Note: These steps may be different depending on your network.
Section 1: Getting Started
13
t719.book Page 14 Thursday, June 29, 2006 1:44 PM
Accessing Your Voice Mail
You can access your Voice Mail server by pressing and holding
on the
keypad or by going to the menu. To access Voice Mail using the menu:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
.
.
4. Highlight Voice mail and press the Select soft key or
.
5. Highlight Call voice mail and press the OK soft key or
phone dials the specified voice mail number.
. Your
6. When connected, follow the voice prompts from the Voice Mail
server.
Changing the Voice Mail Number
Your SIM card gives you the default service number of the Voice Mail server.
However, if you need to change the number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
.
.
4. Highlight Voice mail and press the Select soft key or
.
5. Highlight Voice server number and press the OK soft key or
6. Highlight Voice Mail and press the OK soft key or
7. Edit the number and press the OK soft key or
be saved.
8. Press the
14
key to return to Idle mode.
.
.
. The number will
t719.book Page 15 Thursday, June 29, 2006 1:44 PM
Section 2: Your Phone
Topics Covered
• Features of Your Phone
• View of Your Phone
• Keys
• Display Layout
This section outlines some key features of your phone. It also describes the
screen and the icons that are displayed when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features.
The following list outlines a few of the features included in your phone.
• BlackBerry Email
• 1.3 Megapixel camera and camcorder
• Bluetooth® Wireless Technology
• Web browser
• Instant Messaging capability
• Voice Recognition capability
• Applications feature provides file manager, games, alarms,
calendar, calculator, world time, unit converter, timer, and
stopwatch.
Section 2: Your Phone
15
t719.book Page 16 Thursday, June 29, 2006 1:44 PM
View of Your Phone
The following illustrations show the main elements of your phone:
14.Earpiece
13. Main display
1. Navigation keys
(Up/Down/Left/Right)
2. Soft key (Left)
3. Headset jack
4. Dial key
12. Web access/Confirm key
2. Soft key (Right)
11. Volume keys
10. Camera/Confirm key
9. Power on/off/Menu exit key
5. Alphanumeric keypad
8. Cancel/Delete key/
Calendar menu key
18 Digital camera/camcorder
17. Camera flash
16. External display
15. Speaker
16
t719.book Page 17 Thursday, June 29, 2006 1:44 PM
Keys
Keys
The following list correlates to the illustrations.
1. Navigation keys: In Menu mode, scrolls through the menus.
In Idle mode:
• Up key: allows you to access the Camera or Camcorder
feature directly.
• Down key: allows you to access the Contacts list menu
directly.
• Left key: allows you to access the Messages menu directly.
• Right key: allows you to launch the Voice Recognition feature
directly.
When entering text, moves the cursor to the left or right, depending
on which key you press.
2. Soft key: Performs the functions indicated by the screen text on
the bottom line of the display.
3. Headset jack: Is used for the hands-free headset.
4. Dial key: Makes or answers a call.
In Idle mode, dials the last number you have dialed, received, or
missed when held down.
5. Alphanumeric keypad: Enters numbers, letters, and some special
characters.
1: In Idle mode, accesses your Voice Mail server when held down.
*: In Idle mode, initiates the Voice recognition feature when held
down. Inserts a pause (P) when held down while entering a phone
number.
0: In Idle mode, inserts an international call prefix when held down.
#: In Idle mode, enters or exits Silent mode when held down.
Section 2: Your Phone
17
t719.book Page 18 Thursday, June 29, 2006 1:44 PM
6. Travel adapter/PC data cable jack: Plug your travel adapter for
charging the battery, or your PC data cable for a connection with a
PC.
7. Microphone: Is used during phone calls and voice note recordings.
8. Cancel/Delete key/Calendar menu key: Deletes characters from
the display.
In Menu mode, it returns you to the previous menu level.
In Idle mode, accesses the Calendar menu.
9. Power on/off/Menu exit key: Switches the phone on or off when
held down. Also ends a call. In Menu mode, cancels your input and
returns the phone to Idle mode.
10. Camera/Confirm key: In Idle mode, turns on the camera when
held down.
In Menu mode, selects the highlighted menu option.
With the phone closed, turns on the external display or flashlight
when held down.
11. Volume keys: During a call, adjusts the earpiece volume.
In Idle mode, with the phone open, adjusts the ring volume. With
the phone closed, turns on the external display when held down.
Also, if the external display is on, one of the Volume keys turns on
or off flashlight when held down.
12. Web access/Confirm key: In Idle mode, launches the WAP
(Wireless Application Protocol) browser.
In Menu mode, selects the highlighted menu option.
When the Left soft key shows Options, it is the short-cut key to
select the first option in the option list.
18
t719.book Page 19 Thursday, June 29, 2006 1:44 PM
Keys
13. Main display: Displays area where text and graphics are
displayed.
14. Earpiece: Is used to listen to audio from your phone.
15. Speaker: Is used for Speakerphone mode.
16. External display: Shows the received signal strength, phone
battery level, date, and time.
17. Camera flash: Is used to take pictures when light is not adequate.
18. Digital camera/camcorder: The built-in digital camera/
camcorder has image/video capture capabilities.
Note: You can quickly scroll the screen up or down by running your fingers over the
three keys on the right side of the phone from the top or bottom.
Section 2: Your Phone
19
t719.book Page 20 Thursday, June 29, 2006 1:44 PM
Display Layout
The display has four areas:
Icons
Time and date
Text and graphics area
Soft key function indicators
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when you set an alarm to ring at a specified time.
For details, see "Using Alarm" on page 139.
Appears when a new text message has been received.
Appears when a new multimedia message has been
received.
Appears when a new voice mail has been received.
Appears when the Call Forwarding feature is active. For
details, see page "Call forwarding" on page 93.
Appears when you set the phone to vibrate when you
receive a call.
20
t719.book Page 21 Thursday, June 29, 2006 1:44 PM
Display Layout
Appears when Silent mode is active (Vibration).
Appears when Silent mode is active (Mute).
Appears when Mute mode is active during a call.
Shows the network connection status of the BlackBerry
service.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Backlight
A backlight illuminates the display and the keypad. When you press any key
or open the phone, the backlight comes on. It goes off when no keys are
pressed within a given period of time, depending on the setting in the
Backlight menu.
To specify your Backlight settings:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Settings and press the Select soft key or
.
3. Highlight Display settings and press the Select soft key or
4. Highlight Backlight and press the Select soft key or
.
.
5. Highlight On. Use the Left or Right Navigation key to select how
long the backlight stays on. You may choose between 15 seconds,
30 seconds, 1 minute, 3 minutes, or 10 minutes.
6. Press the Down Navigation key to take you to Dim. Use the Left or
Right Navigation key to select how long the display stays on after
the backlight turns off. You may choose between Off, 15 seconds,
30 seconds, 1 minute, or 3 minutes.
7. Press the Save soft key to save your settings.
Section 2: Your Phone
21
t719.book Page 22 Thursday, June 29, 2006 1:44 PM
22
t719.book Page 23 Thursday, June 29, 2006 1:44 PM
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Accessing Call Records
• Switching To Silent Mode
• Selecting Functions and Options
This section describes how to make or answer a call. It also includes
information on the features and functionality associated with making or
answering a call.
Making a Call
1. When the idle screen displays, enter the phone number and press
the
key.
2. When you want to finish your call, briefly press the
key.
Note: When you activate the Auto redial option from the Extra settings menu in
Phone settings, the phone will automatically redial up to 10 times when the
person does not answer the call, provided your call is not sent to Voice Mail. See
"Extra settings" on page 85 for further details.
Making an International Call
1. In Idle mode, press and hold
. The + character appears.
2. Enter the country code, area code, and phone number and press the
key.
Section 3: Call Functions
23
t719.book Page 24 Thursday, June 29, 2006 1:44 PM
Correcting the Number
1. To clear the last digit displayed, press
.
2. To clear any other digit in the number, press the Left or Right
Navigation key until the cursor is immediately to the right of the
digit to be cleared. Press
. You can also enter a missing digit.
3. To clear the whole display, press and hold
.
Redialing the Last Number
Your phone stores the numbers of the calls you have dialed, received, or
missed if the caller is identified.
To recall any of these numbers:
1. In Idle mode, press the
key.
2. Use the Left or Right Navigation key to move to another call type.
3. Use the Up or Down Navigation key to scroll through the numbers
and highlight the number you want.
4. To dial the number, press the
key.
Before you dial the number, you may press the Options soft key for
the following options:
• Detail: displays details of the number including name,
number, and dates and times of calls.
• Call back: places a call back to the number.
• Send message: allows you to send a text message, picture
message, or voice note message to the number.
• Save to phonebook: stores the number in the Phonebook.
• Delete: allows you to delete the selected call record or all call
records.
For further details about call records, see "Accessing Call Records" on page
27.
24
t719.book Page 25 Thursday, June 29, 2006 1:44 PM
Adjusting the Call Volume
Making a Call from the Phonebook
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Phonebook.
Once you have stored a number in the Phonebook, you can dial it by pressing
a few keys. You can also assign your most frequently-used numbers to
number keys using the Speed Dial feature.
For further details about the Phonebook feature, see "Section 6: Phonebook"
on page 49.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the Volume keys
on the right side of the phone.
Press the
level.
key to increase the volume level and the
key to decrease the
Note: In Idle mode, you can also use these keys to adjust the ringer volume.
Section 3: Call Functions
25
t719.book Page 26 Thursday, June 29, 2006 1:44 PM
Answering a Call
When somebody calls you, the phone rings and displays an incoming call
image. The caller’s phone number, or name if stored in the Phonebook,
displays.
1. If necessary, open the phone. Press the Accept soft key or the
key to answer the incoming call.
If the Anykey answer option from the Extra settings menu in
Phone settings is activated, you can press any key to answer a
call except for the Reject soft key, the
key, and Volume keys.
If the Open to answer option from the Extra settings menu in
Phone settings is activated, you can simply open the phone to
answer a call.
Notes:
To reject an incoming call, press the Reject soft key or
and hold the Volume keys.
key, or press
To mute the ringer, press the Volume keys.
2. End the call by pressing the
key.
Note: You can answer a call while using the Phonebook or menu features. After
ending the call, the phone returns to the function screen you were using.
26
t719.book Page 27 Thursday, June 29, 2006 1:44 PM
Accessing Call Records
Accessing Call Records
All incoming, outgoing and missed calls are listed in the Call Records. You
can also view call time records.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Call records and press the Select soft key or
.
Note: You can also access the call records of incoming, outgoing, and missed calls
by pressing the
key in Idle mode.
The following Call Record options are available:
All calls
This menu lets you view the 90 most recent calls you have dialed, received,
and missed.
The number and name, if already stored in the Phonebook, display with the
number of occurrences of each number.
Note: At any time while you are in Call Records, you may use the Left or Right
Navigation key to scroll between All calls, Missed calls, Incoming calls, and
Outgoing calls.
Section 3: Call Functions
27
t719.book Page 28 Thursday, June 29, 2006 1:44 PM
Missed calls
This menu lets you view the most recent calls you have received, but did not
answer.
The number and name, if already stored in the Phonebook, display with the
number of occurrences of each number.
Viewing Missed Calls without Using the Menu
When you are unable to answer a call for any reason, you can find out who
is calling you, if this service is available, so that you can call the person back.
The number of the calls you have missed displays on the idle screen
immediately after a call is missed.
To view a missed call immediately:
1. If the phone is closed, flip the phone open.
2. Press the View soft key.
The number corresponding to the most recent missed calls
displays, if available.
3. To scroll through the missed calls, press the Up or Down
Navigation key.
4. Press the Options soft key for the following options:
• Detail: displays details of the number including name,
number, and dates and times of calls.
• Call back: places a call back to the number.
• Send message: allows you to send a text message, picture
message, or voice note message to the number.
• Save to phonebook: stores the number in the Phonebook.
• Delete: allows you to delete the selected call record or all call
records.
5. Press the
28
key to return to Idle mode.
t719.book Page 29 Thursday, June 29, 2006 1:44 PM
Accessing Call Records
Incoming calls
This menu lets you view the most recent calls you have received.
The number and name, if already stored in the Phonebook, display with the
number of occurrences of each number.
Outgoing calls
This menu lets you view the most recent numbers you have dialed.
The number and name, if already stored in the Phonebook, display with the
number of occurrences of each number.
Delete all
This menu allows you to delete all of the records in each call type separately.
You can also delete all of your call records at one time.
1. Highlight the type of calls you want to delete and press
place a check mark.
to
2. Press the Delete soft key.
3. When a confirmation message displays, press the Yes soft key or
to confirm.
Call time
This menu lets you view the time log for calls you have made or received.
Note: The actual time invoiced by your service provider may differ from times
displayed due to network features and service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
Section 3: Call Functions
29
t719.book Page 30 Thursday, June 29, 2006 1:44 PM
• Total incoming: shows the total length of all calls you have
received since the timer was last reset.
• Total outgoing: shows the total length of all calls you have made
since the timer was last reset.
• Life time: shows the total length of time for incoming and outgoing
calls. This information cannot be cleared.
To reset a call timer:
1. Use the Up or Down Navigation key to highlight the timer you want
to reset.
2. Press the Reset soft key.
3. Enter the phone password and press the OK soft key or
.
Note: The password is preset to 00000000 at the factory. To change this
password, see "Change password" on page 101.
Switching To Silent Mode
Silent mode is convenient when you want to stop the phone from making a
noise, in a theater for example.
In Idle mode, press and hold
Silent mode icon display.
until the “Silent mode” message and the
In Silent mode, instead of making sounds, your phone will vibrate.
To exit and reactivate the previous sound settings, press and hold
again
until the “Exit silent mode” message appears. The Silent mode icon no longer
displays.
30
t719.book Page 31 Thursday, June 29, 2006 1:44 PM
Selecting Functions and Options
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize it. These
functions are arranged in menus and sub-menus, accessed using the two
soft keys. Each menu and sub-menu allows you to view and change the
settings of a particular function.
Using Soft Keys
The roles of the soft keys vary depending on the function you are currently
using. The labels on the bottom line of the display just above each key
indicate their current role.
Press the Left soft key to
access Menu mode.
Press the Right soft key to
access the Phonebook menu.
Selecting Options
To view the various functions and options available and to select the one you
want:
1. Press a desired soft key.
2. Use the Navigation keys to highlight a menu.
Section 3: Call Functions
31
t719.book Page 32 Thursday, June 29, 2006 1:44 PM
3. To select the function displayed or the option highlighted, press the
Select soft key or
.
4. To view the next function or highlight the next option on a list,
press the Down Navigation key.
5. To move back to the previous function or option on a list, press the
Up Navigation key.
6. To move back up one level in the menu structure, press the Back
soft key or
.
7. To exit the menu structure without changing the settings, press the
key.
When you access a list of options, your phone highlights the currently active
option. If, however, there are only two options, such as On/Off or Enable/
Disable, your phone highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that you can use during
a call.
Switching off the Microphone (Mute mode)
You can temporarily switch your phone’s microphone off, so that the other
person on the phone cannot hear you.
Example: You want to say something to a person in the room but do not want the
person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key and highlight Mute.
2. Press the Select soft key or
. The other person can no longer
hear you. The Mute mode icon ( ) is displayed.
32
t719.book Page 33 Thursday, June 29, 2006 1:44 PM
Selecting Functions and Options
To switch the microphone back on:
1. Press the Options soft key and highlight Unmute.
2. Press the Select soft key or
again. The Mute mode icon (
. The other person can hear you
) is no longer displayed.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can make
another call while you have a call in progress if your network supports this
service.
To place a call on hold, simply press the Options soft key, highlight Hold call,
then press the Select soft key or . You can reactivate the call whenever
you want by pressing the Resume soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you want to dial or look it up in the
Phonebook.
2. Press the
key to dial the second call. The first call is
automatically put on hold.
You can also do as follows:
1. Press the Options soft key and highlight Hold call.
2. Press the Select soft key or
.
3. Make the second call in the normal way.
Section 3: Call Functions
33
t719.book Page 34 Thursday, June 29, 2006 1:44 PM
Answering a Second Call
You can answer an incoming call while you have a call in progress, if this
service is supported by the network and you have set the Call waiting menu
to Activate. You are notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the Accept soft key or the
key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft key,
highlight Swap and press the Select soft key or
.
3. To end the call on hold, press the Options soft key and select End
held call. Then press the Select soft key or
.
4. To end the current call, press the
key.
Switching Between Two Calls
When you have an active call and a call on hold, you may switch between the
two calls, changing the one on hold to active and placing the other on hold.
To switch between the two calls, simply press the Options soft key and
select Swap.
The current call is placed on hold and the call on hold is reactivated so that
you can continue conversing with that person.
When you want to finish, end each call normally by pressing the
key.
Muting or Sending Key Tones
You can turn the key tones off or on.
1. Press the Options soft key and highlight Mute keys or Send keys.
2. Press the Select soft key or
34
.
t719.book Page 35 Thursday, June 29, 2006 1:44 PM
Selecting Functions and Options
If the Mute keys option is selected, your phone does not transmit
the DTMF (Dual Tone Multi-Frequency) tones of the keys, which
allows you to press keys without hearing annoying key tones during
a call.
To communicate with answering machines or computerized
telephone systems, the Send keys option must be selected.
Making a Multi-party Call
A multi-party call is a network service that allows up to six people to take part
simultaneously in a multi-party or conference call.
For further details about subscribing to this service, contact your service
provider.
To set up a multi-party call:
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is
automatically put on hold.
3. To join the first participant to the multi-party call, press the
Options soft key and highlight Join. Press the Select soft key or
.
4. To add a new person to the multi-party call, call the new person in
the normal way and then press the Options soft key or
.
Highlight Join and press the Select soft key or
.
You can add incoming callers by answering the call and pressing
the Options soft key and selecting Join. Repeat as required.
Section 3: Call Functions
35
t719.book Page 36 Thursday, June 29, 2006 1:44 PM
To have a private conversation with one participant:
1. Press the Options soft key and highlight Select one. Press the
Select soft key or
.
The list of call participants appears.
2. Highlight a person you want to talk privately with by pressing the
Up or Down Navigation key, and press the Options soft key.
3. Highlight Split and press the OK soft key.
Now you can talk only to that person. The other participants can
continue to converse with one another.
4. To return both private participants to the multi-party call, press the
Options soft key or
and highlight Join. Press the Select soft
key or
.
All of the multi-party call participants can now hear one another.
To disconnect one participant:
1. Press the Options soft key and highlight Select one. Press the
Select soft key or
.
The list of call participants appears.
2. Highlight the person you want to keep.
3. Press the Options soft key and highlight Split. Press the OK soft
key.
4. Press the Options soft key or
and highlight End held
multiparty. Press the Select soft key or
.
The call with the participant on hold will end, but you can continue
to talk to the other participants.
5. When you want to end the multi-party call, press the
36
key.
t719.book Page 37 Thursday, June 29, 2006 1:44 PM
Selecting Functions and Options
Searching for a Number in the Phonebook
You can access the Phonebook and search for a number during a call.
1. Press the Options soft key and highlight Phonebook. Then press
the Select soft key or
.
2. Highlight Contacts list and press the Select soft key or
.
3. Enter the name that you want to find in the text box located above
the entries. If you enter the first few letters of the name, the
Phonebook entries are listed starting with the first entry matching
your input.
You can also use the Up or Down Navigation key to highlight the
contact that you desire.
4. To view the highlighted entry, press the Options soft key.
5. Highlight View and press the Select soft key or
information is displayed.
6. Highlight a phone number and press the
. The contact
key to dial the number.
For further details about the Phonebook feature, see "Finding a Contact" on
page 52.
Sending DTMF Tones
You can use the Send DTMF option to send a key string or number during a
phone call. For example, you can send a calling card number by DTMF while
on a call.
1. Press the Options soft key.
2. Highlight Send DTMF and press the Select soft key or
.
3. Enter a number and press the OK soft key. The number is sent.
Section 3: Call Functions
37
t719.book Page 38 Thursday, June 29, 2006 1:44 PM
Sending/Accessing a Message
You can send or access text and picture messages during a call.
1. Press the Options soft key.
2. Highlight Messages and press the Select soft key or
.
For more information about the Messages menu, see "Section 7: Messages"
on page 61.
Accessing Menu Mode
You can access Menu mode and use menu functions during a call.
1. Press the Options soft key.
2. Highlight Menu and press the Select soft key or
.
3. Highlight the menu you want to access and press the Select soft
key or
.
Using the Speakerphone Feature
While on a call, you can activate the Speakerphone feature to listen and
speak to the phone without holding it to your ear:
1. Press the Spkr on soft key to turn the Speakerphone on.
2. To turn the Speakerphone off, press the Spkr off soft key.
38
t719.book Page 39 Thursday, June 29, 2006 1:44 PM
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your phone. It also includes an
outline of all the available menus associated with your phone.
Menu Navigation
You can tailor the phone’s range of functions to your needs using menus and
sub-menus. Menus and sub-menus can be accessed by scrolling using the
Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll using the Navigation keys to reach a main menu, Settings
for example. Press the Select soft key or
to enter the menu.
3. If the menu contains sub-menus, Security for example, you can
access them by pressing the Select soft key or
after the submenu has been highlighted.
If the menu that you have selected contains further options, repeat
this step.
Section 4: Menu Navigation
39
t719.book Page 40 Thursday, June 29, 2006 1:44 PM
4. To scroll through the menus, press the Up or Down Navigation
keys.
5. To confirm the chosen setting, press the Select soft key or
.
6. To return to the previous menu level, press the Back soft key or
.
7. To exit the menu without changing the settings, press the
key.
Using Shortcuts
The menu items, such as menus, sub-menus, and options, are numbered and
can be accessed quickly by using their shortcut numbers. For the main
menus, you can access any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Security menu.
1. Press the Menu soft key.
40
2. Press
for Settings.
3. Press
for Security.
t719.book Page 41 Thursday, June 29, 2006 1:44 PM
Menu Outline
Menu Outline
The following list shows the menu structure and indicates the number
assigned to each option.
6.3.3 Videos
6.3.4 Other files
6.3.5 Memory status
1 Voice notes (See page 132)
2 Call records (See page 27)
2.1
2.2
2.3
2.4
2.5
2.6
All calls
Missed calls
Incoming calls
Outgoing calls
Delete all
Call time
6.4 Calculator
6.5 Games
6.6 Utilities
6.6.1
6.6.2
6.6.3
6.6.4
6.6.5
6.6.6
3 t-zones (See page 171)
3.1
3.2
3.3
3.4
Home
Favorites
Go to URL
Clear cache
4 Instant Messaging
(See page 79)
5 Messages (See page 61)
6 Applications
(See page 131)
6.1 Calendar
6.2 Alarm
6.3 File manager
Voice recognition
World time
Unit conversion
Timer
Stopwatch
Voice mail
6.7 Setup BlackBerry
Internet email account
7 Get More Help
(See page 158)
8 Camera (See page 159)
8.1
8.2
8.3
8.4
8.5
8.6
Take and send
Record video
My photos
My videos
My Album
My Journal
6.3.1 Sounds
6.3.2 Images
Section 4: Menu Navigation
41
t719.book Page 42 Thursday, June 29, 2006 1:44 PM
9 Settings (See page 83)
9.1 Time & Date
9.2 Phone settings
9.2.1 Language
9.2.2 Greeting
message
9.2.3 Extra settings
9.2.4 Side keys
9.3 Display settings
9.3.1
9.3.2
9.3.3
9.3.4
9.3.5
9.3.6
9.3.7
9.3.8
Wallpaper
Info display
Interior display
LCD brightness
control
Front LCD
contrast control
Backlight
Dialing display
Show caller
information
9.4 Sound settings
9.4.1
9.4.2
9.4.3
9.4.4
9.4.5
9.4.6
9.4.7
Incoming call
Keypad tone
Message tone
Power on/off
Folder tone
Silent mode
Extra tones
9.5 Network services
9.5.1
9.5.2
9.5.3
9.5.4
42
Call forwarding
Call barring*
Call waiting
Network
selection
9.5.5 Caller ID
9.6 Bluetooth
9.6.1 Turn Bluetooth
On/Off
9.6.2 My devices
9.6.3 My visibility
9.6.4 My phone name
9.6.5 Security modes
9.6.6 Features
9.7 Security
9.7.1
9.7.2
9.7.3
9.7.4
9.7.5
PIN check
Change PIN
Change password
FDN mode
Change PIN2
9.8 Voice recognition
settings
9.8.1
9.8.2
9.8.3
9.8.4
9.8.5
Choice lists
Sensitivity
Digit dialing
Sound
About
9.9 Reset settings
9.10 Message settings
9.10.1
9.10.2
9.10.3
9.10.4
Email
Text message
Picture message
Broadcast
message
9.10.5 Calendar view
mode
9.10.6 BlackBerry
options
* Shows only if supported by your SIM card.
t719.book Page 43 Thursday, June 29, 2006 1:44 PM
Section 5: How to Enter Text
Topics Covered
• Changing the Text Input Method
• Understanding Keypad Functions
• Using the Multi-tap Input Method
• Using the Speedy word Input Method
• Entering Numbers and Special Characters
This section describes how to select the desired text input method when
entering characters into your phone. This section also describes how to use
the Speedy word Input Method to reduce the number of keystrokes
associated with entering text.
Changing the Text Input Method
When using your phone, you will often need to enter text, such as when
writing a message, storing a name in the Phonebook, creating your personal
greeting or scheduling events on your calendar. You can enter alphanumeric
characters by using your phone’s keypad.
Your phone has the following text input modes:
• Speedy word Input Method: This mode allows you to enter words
with only one keystroke per letter. Each key on the keypad has more
than one letter; for example, pressing
can enter G or H.
However, the Speedy word input method automatically compares
the series of keystrokes you make with an internal linguistic
dictionary to determine the most likely word, thus requiring far
fewer keystrokes than the Multi-tap input method.
Section 5: How to Enter Text
43
t719.book Page 44 Thursday, June 29, 2006 1:44 PM
• Multi-tap Input Method: This method allows you to enter letters
by pressing the key labeled with the letter you want. How many
times you press the key determines which letter appears.
When you are in a field that allows characters to be entered, you will notice
the text input method indicator on the display.
Text input method indicator
1. To change the text input method, press and hold
.
Each time you press and hold
, a different text input method
indicator will be displayed at the upper right corner of your display.
The following options are available:
•
: Multi-tap Input Method
•
: Speedy word Input Method
2. When the text input method indicator that you want is displayed,
enter text in the message box using the selected text input method.
3. To change the case of the text before you type, press
. The text
input method indicator will change to show which case has been
selected as shown below. The following options are available for
both text input methods:
•
: All upper-case letters. For example, SAMSUNG.
•
: All lower-case letters. For example, samsung.
•
: Leading upper-case. For example, Samsung.
44
t719.book Page 45 Thursday, June 29, 2006 1:44 PM
Understanding Keypad Functions
Understanding Keypad Functions
This phone features a QWERTY keypad which is similar to most typewriters
and computer keyboards.
1. Symbol key
7. Backspace/Delete key
6. Enter key
2. Alt key
5. Shift key
3. Symbol/Next key
4. Space key
1. Symbol key: Press this key to access a list of symbols and special
characters after pressing
.
2. Alt key: Press this key before pressing a key to have that character
displayed on the upper half of each alphanumeric key.
3. Symbol/Next key: Press this key to enter special characters. Also
highlight the next word choice in Speedy word mode.
4. Space key: Press this key to insert blank spaces between words.
5. Shift key: This key functions as a Caps Lock.
6. Enter key: This key functions as a Carriage return.
7. Backspace/Delete key: Press this key to delete a character or
backspace.
Section 5: How to Enter Text
45
t719.book Page 46 Thursday, June 29, 2006 1:44 PM
Using the Multi-tap Input Method
To use the Multi-tap input method, use the keypad to enter your text.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When entering
the same letter twice or a different letter on the same key, just wait for a few
seconds for the cursor to move to the right automatically, and then select the next
letter.
Keys
First press is Q or q, second press is W or w.
First press is E or e, second press is R or r.
First press is T or t, second press is Y or y.
First press is U or u, second press is I or i.
First press is O or o, second press is P or p.
First press is A or a, second press is S or s.
First press is D or d, second press is F or f.
First press is G or g, second press is H or h.
First press is J or j, second press is K or k.
First press is L or l. No second press is needed.
46
t719.book Page 47 Thursday, June 29, 2006 1:44 PM
Using the Speedy word Input Method
First press is Z or z, second press is X or x.
First press is C or c, second press is V or v.
First press is B or b, second press is N or n.
First press is M or m. No second press is needed.
You can move the cursor by using the Navigation keys. To delete letters, press
. Press and hold
to clear the whole display.
Using the Speedy word Input Method
The Speedy word Input Method is a predictive text input mode that allows
you to key in any character using single keystrokes. This text input mode is
based on a built-in dictionary.
To enter a word in the Speedy word Input Method:
1. Start entering a word by pressing the numeric keys. Press each key
only once for each letter.
Example: To enter “Hello,” press the following keys:
H
E
L
L
O
The word that you are typing appears on the display. It may change
with each key that you press. The word choices for your key presses
appear on the soft key indicator field. You can select another word
by pressing the Left or Right Navigation key or
.
2. Enter the whole word before editing or deleting the keystrokes.
If the word does not display correctly, a list of alternative words
will appear at the bottom of the display. Use the Navigation keys to
highlight the word you desire.
Section 5: How to Enter Text
47
t719.book Page 48 Thursday, June 29, 2006 1:44 PM
3. Confirm the word by pressing
4. Insert a space by pressing
or the Right soft key.
and start entering the next word.
The Speedy word Input Method applies grammar rules to ensure that correct
punctuation is used.
You can move the cursor by using the Navigation keys. To delete letters, press
. Press and hold
to clear the whole display.
Entering Numbers and Special Characters
In either text input method, to enter numbers, symbols, and special
characters, follow these steps:
• To enter numbers, press
Note: After pressing
, and then the desired number key.
, release it before pressing another key.
• To enter a period, press
• To enter a comma, press
, and then press
, and then press
• To enter an exclamation mark, press
• To enter a question mark, press
.
.
, and then press
, and then press
.
.
• To enter other symbols, press
, and then press
.A
numbered list of symbols and special characters is listed. Enter the
number corresponding to the desired character and press the OK
soft key.
• By pressing
multiple times you can enter the following
characters: . @ , - ? ! : ( ) / _
48
t719.book Page 49 Thursday, June 29, 2006 1:44 PM
Section 6: Phonebook
Topics Covered
• Storing a Contact
• Finding a Contact
• Speed Dialing
• Managing Caller Groups
• Copying all SIM Phonebook Entries
• Deleting all of the Phonebook Entries
• Creating My Name Card
• Setting My Own Phone Number
• Checking the Memory Status
This section describes how to store contacts in your Phonebook and manage
your contacts.
Storing a Contact
You can store phone numbers and their corresponding names on your SIM
card or phone’s memory. They are physically separate but are used as a single
entity, called Phonebook. Also, numbers that have been stored on your SIM
card can be copied to your phone’s memory.
Depending on your particular SIM card, the maximum number of phone
numbers the SIM card can store may differ.
Note: When you copy a phone number from your SIM card to your phone’s memory,
the number will appear twice in your contact list.
Section 6: Phonebook
49
t719.book Page 50 Thursday, June 29, 2006 1:44 PM
Storing a Number in the Phone’s Memory
1. In Idle mode, press the Ph.book soft key.
2. Highlight Add new contact and press the Select soft key or
.
3. Enter a first name in the First name text box. Tab to the next text
box by pressing the Down Navigation key.
For further details about how to enter characters, see "Using the
Multi-tap Input Method" on page 46.
4. Enter a last name in the Last name text box.
5. Highlight a number type by pressing the Up or Down Navigation
key, then enter a number in the text box.
The following types are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the
entry.
• Email: assigns the address to the Email entry.
6. Continue to scroll down using the Down Navigation key to set a
Picture ID, Ringtone, Group, Memo, and PIN if desired.
7. Press the Save soft key or
. The number is saved to your phone’s
memory and the new contact information is displayed.
8. To return to Idle mode, press the
50
key.
t719.book Page 51 Thursday, June 29, 2006 1:44 PM
Storing a Contact
Storing a Number on the SIM Card
The default memory location for saving phone numbers to the Phonebook is
your phone’s memory. To store a number on your SIM card, you need to
change the default saving location to SIM card first. For details, see page 52.
1. In Idle mode, press the Ph.book soft key.
2. Highlight Add new contact and press the Select soft key or
.
3. Enter a name in the Name text box. Tab to the next text box by
pressing the Down Navigation key.
For further details about how to enter characters, see "Using the
Multi-tap Input Method" on page 46.
Note: Contacts stored to your SIM card do not have first and last names as
separate fields. Therefore, you will have to enter first and last name in the
name field if so desired.
4. Enter the phone number you want to store.
Note: To set a Picture ID, Ringtone, or Group, you must save the number in the
phone’s memory.
5. Press the Save soft key or
. The number is saved to your SIM
card and the new contact information is displayed.
6. To return to Idle mode, press the
key.
Section 6: Phonebook
51
t719.book Page 52 Thursday, June 29, 2006 1:44 PM
Changing the Default Saving Location
The default memory location for saving phone numbers to your phonebook
is your phone’s memory. You can change the memory location to save phone
number to your SIM card or you can set your default so that whenever a new
Phonebook entry is created.
To change the default memory location, do as follows:
1. In Idle mode, press the Ph.book soft key.
2. Highlight Management and press the Select soft key or
.
3. Highlight Default saving and press the Select soft key or
.
4. Highlight Phone, SIM card, or Ask on saving and press the
Select soft key or
.
If you select Ask on saving, you will be prompted to choose
between Phone or SIM card each time you try to store a number in
the Phonebook.
5. To return to Idle mode, press the
key.
Finding a Contact
1. In Idle mode, press the Ph.book soft key.
2. Highlight Contacts list and press the Select soft key or
.
Note: Steps 1 to 2 can be bypassed by pressing the Down Navigation key while
in Idle mode.
3. Enter the first few letters of the name you want to find in the text
box.
The Phonebook entries are listed, starting with the first entry
matching your input.
52
t719.book Page 53 Thursday, June 29, 2006 1:44 PM
Finding a Contact
4. If needed, press the Up or Down Navigation key until the entry you
want is highlighted.
5. Once you have found the entry, press the
key to dial a number,
or press the Options soft key to access the following Phonebook
entry options:
• View: shows the details of the Phonebook entry.
• Edit: allows you to edit the contents of your contact.
• Send message: allows you to send a message to the
selected number. You may choose Text message, Picture
message, Voice note, or Email.
• Add new contact: allows you to add a new Phonebook entry.
• Call: places a call to the number.
• Copy to: allows you to copy the contact to your phone’s
memory or SIM card.
• Copy all to phone: allows you to copy all numbers stored on
your SIM card to your phone’s memory.
• Assign speed dial: allows you to assign a speed dial number
to the selected Phonebook entry.
• Delete: allows you to delete the selected name and number
from the Phonebook or delete all Phonebook entries. You are
asked to confirm that you want to delete the name and
number by pressing the Yes soft key. To cancel, press the No
soft key.
• Language select: allows you to select between English,
French, or Spanish.
Section 6: Phonebook
53
t719.book Page 54 Thursday, June 29, 2006 1:44 PM
6. If you select the View option, press the Options soft key after the
contact information is displayed, for these additional options:
• Edit: allows you to edit the name and number fields in the
entry. You can also add email address and notes.
• Send message: allows you to send a message to the
selected number. You may choose Text message, Picture
message, Voice note, or Email.
• Call: places a call to the number.
• Copy to: allows you to copy the number to your phone’s
memory or SIM card.
• Send name card via: allows you to send the selected
Phonebook entry as a digital name card format (VCF) via Text
message, Picture message, or Bluetooth.
• Assign speed dial: allows you to assign a speed dial number
to the selected Phonebook entry.
• Delete: allows you to delete the name and number from the
Phonebook. You are asked to confirm that you want to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
After viewing one Phonebook entry, you can scroll through all
Phonebook entries by pressing the Right or Left Navigation key.
Note: The Corporate Email Address lookup of the contact allows you to search for
names stored at the Exchange Server or Lotus Notes if they are managed by your
work place with BlackBerry Enterprise Server. Enter the email address you want to
find and press the Search soft key. For further information, consult with your
system administrator.
54
t719.book Page 55 Thursday, June 29, 2006 1:44 PM
Speed Dialing
Speed Dialing
Once you have stored phone numbers in the Phonebook, you can set up to 8
speed dial entries and then dial them easily whenever you want, simply by
pressing and holding the associated numeric key.
Setting Up Speed Dial Entries
1. In Idle mode, press the Ph.book soft key.
2. Highlight Speed dial and press the Select soft key or
.
3. Use the Navigation keys to select the number key to which you
want to assign the speed-dialing number. Select one from the 2 to
9 keys, and press the Options soft key.
4. Highlight Add and press the Select soft key or
list will be displayed.
. Your Contact
5. Highlight the entry you want to assign the speed dial to and press
the Select soft key or
.
6. If the entry has more than one number, highlight the one you want
and press the Select key or
.
The number will be assigned to your speed dial entry.
Note: Memory location 1 is reserved for your Voice Mail server number and cannot
be changed.
Dialing a Speed Dial Number
In Idle mode, press and hold the appropriate key to speed dial the numbers
assigned to keys (2 to 9).
Section 6: Phonebook
55
t719.book Page 56 Thursday, June 29, 2006 1:44 PM
Managing Caller Groups
The Phonebook provides you with caller groups to allow you to organize your
contacts by category. You can edit the properties of those caller groups or
create a new caller group.
Editing a Caller Group
1. In Idle mode, press the Ph.book soft key.
2. Highlight Group and press the Select soft key or
.
3. Scroll through the group list by pressing the Up or Down
Navigation key.
4. Highlight the group you want and press the Options soft key.
5. Highlight Edit and press the Select soft key or
.
6. To edit the caller group name, modify the text in the Name text box.
7. To change the image associated with the caller group, press the
Down key to highlight the Picture ID icon. Press
.
The following options are available:
• Take picture: allows you to take a photo with your camera.
• My photos: allows you to choose one of the photos in the My
photos folder.
• My downloads: allows you to choose one of the downloaded
images.
• Icons: allows you to choose one of the embedded icons.
8. To change the ringtone associated with the caller group, press the
Down Navigation key to highlight the RingTone icon. Press
.
The following options are available:
• Default sounds: allows you to choose one of 30 different
melodies.
56
t719.book Page 57 Thursday, June 29, 2006 1:44 PM
Copying all SIM Phonebook Entries
• My sounds: allows you to assign one of the ringtones in the
My sounds folder.
9. When you are finished, press the Save soft key. Your caller group
settings will be saved.
10. Press the
key to return to Idle mode.
Adding a New Group
1. In Idle mode, press the Ph.book soft key.
2. Highlight Group and press the Select soft key or
.
3. Press the Options soft key.
4. Highlight Add new group and press the Select soft key or
.
5. Enter a group name.
6. Set a picture ID and ringtone, and save the group by following from
step 7 in "Editing a Caller Group" on page 56.
Copying all SIM Phonebook Entries
You can copy all SIM entries to the phone’s memory. When you copy entries
to the phone’s memory, duplicate entries are created in the Phonebook.
1. In Idle mode, press the Ph.book soft key.
2. Highlight Management and press the Select soft key or
.
3. Highlight Copy all to phone and press the Select soft key or
.
4. After receiving the Copy all to phone? confirmation message,
press the Yes soft key.
Section 6: Phonebook
57
t719.book Page 58 Thursday, June 29, 2006 1:44 PM
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s memory, your SIM card, or
both.
Important! Once Phonebook entries have been deleted, they cannot be recovered.
1. In Idle mode, press the Ph.book soft key.
2. Highlight Management and press the Select soft key or
3. Highlight Delete all and press the Select soft key or
.
.
4. Press
to place a check mark by the memory location you want
to empty; All, Phone, or SIM card.
You can remove the check mark by pressing
again.
5. Press the Delete soft key.
6. Enter your password and press the OK soft key or
.
Note: The password is preset to 00000000 at the factory. To change this
password, see "Change password" on page 101.
7. When the Delete all? confirmation message appears, press the
Yes soft key or
.
To cancel the deletion, press the No soft key.
8. When you are finished, press the
58
key to return to Idle mode.
t719.book Page 59 Thursday, June 29, 2006 1:44 PM
Creating My Name Card
Creating My Name Card
My name card allows you to create a virtual business card. Once completed,
you can send the card to recipients as a V-card attachment.
1. In Idle mode, press the Ph.book soft key.
2. Highlight My name card and press the Select soft key or
.
The name card screen opens with the First name field highlighted.
3. Enter information in each of the fields as desired. Use the Up or
Down Navigation key to move between fields, then use the keypad
to enter information.
4. When you have finished, press the Options soft key and highlight
Save. Press the Select soft key or
. Your name card will be
saved.
Setting My Own Phone Number
This function is a memory aid, which you can use to check your own phone
number if you need to do so.
You can assign a name to each of your own phone numbers registered on your
SIM card. You can also edit the names and numbers. Any changes made here
do not in any way affect the actual subscriber numbers on your SIM card.
1. In Idle mode, press the Ph.book soft key.
2. Highlight Own number and press the Select soft key or
.
3. Highlight Number 1 and press the Options soft key.
Section 6: Phonebook
59
t719.book Page 60 Thursday, June 29, 2006 1:44 PM
4. Highlight Edit and press the Select soft key or
.
Your phone number is displayed.
5. Edit the name and number, and press the Save soft key or
6. Press the
.
key to return to Idle mode.
Checking the Memory Status
You can check how many names and numbers are stored in the Phonebook
both on the SIM card and in the phone’s memory. You can also see the
capacity of both memories.
1. In Idle mode, press the Ph.book soft key.
2. Highlight Management and press the Select soft key or
3. Highlight Memory status and press the Select soft key or
Memory information in each storage location appears.
4. Press the
60
key to return to Idle mode.
.
.
t719.book Page 61 Thursday, June 29, 2006 1:44 PM
Section 7: Messages
Topics Covered
• Composing and Sending a BlackBerry Email
• Composing and Sending a Text Message
• Composing and Sending a Picture Message
• Sending a Voice Note Message
• Composing and Sending a PIN message
• Accessing Messages
• Using Text Templates
• Searching for Messages
This section describes how to send and receive text, picture, voice note, and
PIN messages. It also includes the features and functionality associated
with the messaging services. You can also send and receive emails on your
phone using the BlackBerry email service.
The following message types are available:
• BlackBerry email
• Text messages
• Picture messages
• Voice note message
• PIN messages
Section 7: Messages
61
t719.book Page 62 Thursday, June 29, 2006 1:44 PM
Composing and Sending a BlackBerry Email
You can send an email via your BlackBerry email service. First, you need to
set up the BlackBerry email service, referring to "Section 10: Using
BlackBerry Email" on page 113.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Press the Compose soft key.
4. Highlight Email and press the Select soft key or
.
5. Highlight [Email address] or [Phonebook] and press the Select
soft key or
.
6. Select the email address to which you want the email to be sent.
The selected address is inserted in the To text box.
7. To enter additional address, press the Options soft key, select Add
address to enter additional to, cc, bcc addresses.
8. Press the Down Navigation key and enter the message subject.
9. Press the Down Navigation key and enter the message text.
10. When you have finished entering the message text, press the
Options soft key.
The following options are available:
• Send: allows you to send the message.
• Add address: allows you to enter additional to, cc, bcc
addresses.
• Save to drafts: saves the message as a draft for sending at a
later time.
• Options: allows you to set the importance level and
sensitivity level of the message.
62
t719.book Page 63 Thursday, June 29, 2006 1:44 PM
Composing and Sending a Text Message
• Language select: allows you to set the language to English,
French, or Spanish.
11. Highlight Send and press the Select soft key or
sends the message.
. Your phone
Composing and Sending a Text Message
Short Message Service (SMS) allows you to send and receive short text
messages to and from other mobile phones. In addition, your phone supports
the Enhanced Messaging Service (EMS), which enables you to include
simple graphics, melodies, and animated images in your messages.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Press the Compose soft key.
4. Highlight Text message and press the Select soft key or
.
5. Enter the message text.
For further details about entering characters, see "Section 5: How
to Enter Text" on page 43.
6. When you have finished entering your message, press the Options
soft key. The following options are available:
• Send: allows you to send the message.
• Insert text via: allows you to insert text templates,
Phonebook entries, or URL addresses in Favorites. The Text
templates option allows you to apply one of the preset
message templates to the text. Select one of the 10 items
stored in the Text messages template menu. Phonebook
allows you to add names and phone numbers to your
message. Favorites allows you to add URL addresses to your
message.
Section 7: Messages
63
t719.book Page 64 Thursday, June 29, 2006 1:44 PM
• Add content: allows you to add a picture, animation, or
melody to your message.
• Attach: allows you to attach a name card to your message.
• Save to Drafts: saves the message as a draft for sending at a
later time.
• Language select: allows you to set the language to English,
French, or Spanish.
• Text style: allows you to format the style of the text. For the
text size, Large, Medium, and Small are available. Text
mode options include Normal, Underline, and
Strikethrough. The options for Bold and Italic are set by
using
to place a check mark.
• Speedy word: allows you to set the Speedy word input
method as a default when creating a message.
7. Highlight Send and press the Select soft key or
.
8. Highlight one of the following options and press the Select soft key
or
:
• Recent log: allows you to select one of the recipients of your
previous messages.
• Phonebook: allows you to select a phone number from the
Phonebook.
• Phone number: allows you to manually enter a phone
number.
9. If you chose Recent log, use
to place check marks next to the
entries you want and press the Add soft key.
64
t719.book Page 65 Thursday, June 29, 2006 1:44 PM
Composing and Sending a Picture Message
If you chose Phonebook, highlight the contact you want and press
the Select soft key or
. If the contact has more than one
number, highlight the number you want and press the Select soft
key or
.
If you chose Phone number, enter a phone number in the To text
box.
10. To add another destination, enter a number in the To text box, or
press Options soft key, select Recent log, Phonebook, or Group,
and select the entries you want.
11. When you have finished entering the destinations, press the
Options soft key, highlight Send message, and press the Select
soft key or
. Your phone sends the message.
Composing and Sending a Picture Message
Picture Messaging is a messaging service that provides delivery of personal
multimedia messages from phone to phone or from phone to email.
In addition to the familiar text content of text messages, picture messages
can contain images, graphics, voice, and audio clips. A picture message is
a multimedia presentation in a single file. It is not a text file with
attachments.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Press the Compose soft key.
4. Highlight Picture message and press the Select soft key or
5. Highlight Subject and press
.
.
Section 7: Messages
65
t719.book Page 66 Thursday, June 29, 2006 1:44 PM
6. Enter the message subject and press
.
For more information about entering characters, see "Section 5:
How to Enter Text" on page 43.
7. To add a picture or video clip, highlight Image & Video and press
.
8. Highlight Add Image or Add video and press the Select soft key
or
.
9. Select an image or video file from the various options.
10. Press the Options soft key. Highlight Add and press the Select
soft key or
to add it to your message.
11. To add a sound, highlight Sound and press
.
Note: If you attached a video clip to your message, you will not be able to add
audio to the message.
12. Highlight Add Sound and press the Select soft key or
.
13. Select a sound file or voice note from the various options.
14. Press the Options soft key. Highlight Add and press the Select soft
key or
to add it to your message.
15. To add the message text, highlight Message and press
16. Enter the text and press
.
.
17. When you have finished creating the message, press the Send soft
key.
18. Highlight one of the following options and press the Select soft key
or :
• Recent log: allows you to select one of the recipients of your
previous messages.
• Phonebook: allows you to select a phone number from the
Phonebook.
66
t719.book Page 67 Thursday, June 29, 2006 1:44 PM
Sending a Voice Note Message
• Phone number: allows you to manually enter a phone
number.
• Email address: allows you to manually enter an email address.
• My Album: allows you to send the message to your online
photo album on t-zones.
• My Journal: allows you to send the message to your online
personal journal site on t-zones.
19. After selecting or entering the destinations, press the Options soft
key. Highlight Send and press the Select soft key or
. Your
phone sends the message.
Sending a Voice Note Message
You can record a voice note and send it as part of a message.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Press the Compose soft key.
4. Highlight Voice note and press the Select soft key or
voice recorder screen appears.
5. Press the Record soft key or
speaking into the microphone.
. The
and record a voice note by
6. When you have finished, press the Stop soft key or the Down
Navigation key.
7. Press the Send soft key.
8. Highlight one of the following options and press the Select soft key
or
:
• Recent log: allows you to select one of the recipients of your
previous messages.
Section 7: Messages
67
t719.book Page 68 Thursday, June 29, 2006 1:44 PM
• Phonebook: allows you to select a phone number from the
Phonebook.
• Phone number: allows you to manually enter a phone
number.
• Email address: allows you to manually enter an email address.
• My Album: allows you to send the message to your online
photo album on t-zones.
• My Journal: allows you to send the message to your online
personal journal site on t-zones.
9. After selecting or entering the destinations, press the Select soft
key or
.
To add another destination, select an empty To field, press the
Options soft key. Repeat from step 7.
Note: When entering multiple destinations, you can also choose Group,
Save to Drafts, Change recipient, and Back options in addition to the
other send options.
10. When you have finished entering the destinations, press the
Options soft key. Highlight Send and press the Select soft key or
. Your phone sends the message.
Composing and Sending a PIN message
A personal identification number (PIN) uniquely identifies each device on the
network. If you know another person’s PIN, which consists of 8 alphanumeric
characters, you can send a PIN message to that person by entering the PIN
as the destination.
Note: A PIN number is obtained when your device is provisioned for the BlackBerry
service.
68
t719.book Page 69 Thursday, June 29, 2006 1:44 PM
Composing and Sending a PIN message
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Press the Compose soft key.
4. Highlight PIN message and press the Select soft key or
.
5. Select the PIN from the PIN number list or highlight PIN address
and press the Select soft key or
. If you select PIN address,
enter the PIN number and press the OK soft key or
.
6. Enter the message subject and press the Down Navigation key.
7. Enter the message text.
8. When you have finished entering your message, press the Options
soft key. The following options are available:
• Send: allows you to send the message.
• Add address: allows you to enter additional to, cc, bcc
addresses.
• Save to drafts: saves the message as a draft for sending at a
later time.
• Options: allows you to set the importance level and
sensitivity level of the message.
• Language select: allows you to set the language to English,
French, or Spanish.
• Speedy word: allows you to set the Speedy word input
method as a default when creating a message.
9. Highlight Send and press the Select soft key or
sends the message.
. Your phone
Section 7: Messages
69
t719.book Page 70 Thursday, June 29, 2006 1:44 PM
Accessing Messages
When you access the Messages menu, a list of all types of messages
appears in the order of the time and date when they were created or received.
You can tell what type of message it is by the icon displayed. If the icon
envelope is open, the message has been read. Otherwise it will appear
closed.
The following icons of messages may appear on the Messages list:
Icon
Message
type
Text
messages
(Sent)
(To be sent)
PIN
messages
(Pending)
(Being sent)
(Sent)
(Failed to be sent)
BlackBerry
emails
(Pending)
(Being sent)
(Sent)
(Failed to be sent)
(To be sent)
Picture
messages
(Retrieved)
(Being retrieved)
(Sent)
(Failed to be sent)
(To be sent)
Voice note
messages
(Retrieved)
(Being retrieved)
(Sent)
(Failed to be sent)
Push
messages
70
Message status
t719.book Page 71 Thursday, June 29, 2006 1:44 PM
Accessing Messages
Note: On the message list, you can resend the selected message by pressing the
Left or Right Navigation key.
Accessing Messages by Category
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Highlight a date bar and press the Options soft key.
4. Highlight View folder and press the Select soft key or
.
5. Highlight BlackBerry email to access incoming or outgoing
BlackBerry emails or highlight SMS/MMS to access incoming or
outgoing text messages and picture messages, and press the
Select soft key or
.
6. Highlight one of the following message folders and press the
Select soft key or
:
• Inbox: stores received messages.
• Sentbox: stores messages successfully sent.
• Outbox: stores messages to be sent or ones that failed to be
sent.
• Drafts: stores messages as drafts for sending at a later time.
7. Highlight a message and press
.
Note: The BlackBerry emails are associated with folders at your Desktop client.
The Desktop client is normally connected to Microsoft Exchange server or IBM
Lotus Notes. When a folder is created at your Desktop client, the folder will be
displayed automatically on the email folder list on your phone. You can only create
the folder at your Desktop client. You can also move BlackBerry emails to one of
the folders by using the File option.
Section 7: Messages
71
t719.book Page 72 Thursday, June 29, 2006 1:44 PM
Viewing an Incoming Message
1. Select a received message from the Messages list or the Inbox list
and press the Options soft key.
The following options will appear. Depending on the type of the
selected message, available options vary:
• Open: allows you to read the message.
• Play: plays the voice note and view message details, if it is a
voice note message.
• Mark opened: switches the message status opened. The
message icon changes to an unopened envelope.
• Reply: allows you to send a reply to the sender by sending a
text or picture message.
• Forward: allows you to forward the message to other
numbers.
• Delete: deletes the selected message or all messages.
• Call back: places a call to the selected number.
2. Highlight Open and press the Select soft key or
message contents.
to read the
3. To scroll through the contents, press the Up or Down Navigation
key.
To scroll to other messages in the same folder, press
or
.
While reading a received message, you may choose the following options by
pressing the Options soft key. Depending on the type of the selected
message, available options vary:
• Reply via: allows you to send a reply to the sender by sending a
text or picture message.
72
t719.book Page 73 Thursday, June 29, 2006 1:44 PM
Accessing Messages
• Reply all via: allows you to send a reply to all recipients by
sending a picture message or voice note, if it is a picture message
or voice note message.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to other numbers.
• Replay: allows you to view the message or listen to the note again,
if it is a picture message or voice note message.
• Delete: allows you to delete the message.
• Move to phone: moves the message from the SIM card to the
phone’s memory. This option is only available for messages stored
on the SIM card.
• Move to SIM card: moves the message from the phone’s memory
to the SIM card. This option is only available for messages stored in
the phone’s memory.
• Go to URL: allows you to go to the website corresponding to the
selected URL address in the message, if it is a push message from
a web server.
• Save address: allows you to extract the sender’s number and URL,
email addresses or phone numbers from the message text, so that
you can save them in your phone’s memory.
• Save media: allows you to save the media file in a message.
• Protection: allows you to lock the message to protect it from being
deleted.
Section 7: Messages
73
t719.book Page 74 Thursday, June 29, 2006 1:44 PM
Viewing a Message When You Receive It
When a new picture message comes in, the display shows a picture message
icon.
1. Press the View soft key to open the message.
Press the Exit soft key if you want to view the message later in the
Inbox.
2. Press the Options soft key or
described above.
to access the various options
3. When you are finished, press the
key.
Accessing an Outgoing Message
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Select a message from the Messages list or the Sentbox or Outbox
list and press the Options soft key.
4. Highlight Open and press the Select soft key or
message contents.
to read the
5. To scroll through the contents, press the Up or Down Navigation
key.
To scroll to other messages in the same folder, press
or
.
While viewing a message, you can choose different options by pressing the
Options soft key.
• Send again: allows you to send the message again.
• Forward: allows you to forward the message to other numbers.
• Delete: allows you to delete the message.
74
t719.book Page 75 Thursday, June 29, 2006 1:44 PM
Using Text Templates
• Save address: allows you to extract the sender’s number and URL,
email addresses or phone numbers from the message text, so that
you can save them in your phone’s memory.
• Protection: allows you to lock the message to protect it from being
deleted.
Using Text Templates
Besides entering message text using the keypad keys, you can speed
message composition by including copies of stored text (Templates) in your
message.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Highlight a message sent, failed to be sent, or waiting to be sent,
press the Options soft key.
4. Highlight Text message templates and press the Select soft key
or
.
5. Highlight the sentence you want.
6. To edit the sentence, press
to save changes.
. Change the sentence and press
To send a new message using the sentence, press the Options soft
key and select Send message, then a message type. The sentence
will be placed on a message display. Continue to write your
message. For more information, see "Composing and Sending a
Text Message" on page 63 or "Composing and Sending a Picture
Message" on page 65.
Section 7: Messages
75
t719.book Page 76 Thursday, June 29, 2006 1:44 PM
Searching for Messages
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or
.
3. Highlight a date bar and press the Options soft key.
4. Highlight Search messages and press the Select soft key or
.
5. Set the following search options:
• Name: allows you to set a sender or recipient’s name.
• In: allows you to specify in which field the phone searches for
the entered name.
• Subject: allows you to set the message subject.
• Message: allows you to set the message text.
• Folder: allows you to specify which folder the phone
searches.
6. Press the Search soft key. The phone begins searching for the
messages matching your input and displays the results.
7. Highlight the message you want and compose a new message or
access options.
76
t719.book Page 77 Thursday, June 29, 2006 1:44 PM
Section 8: Other Messaging
Topics Covered
• Voice Mail
• Broadcast Messages (SIM dependent)
• Instant Messaging
This section describes how to send or receive different types of messages.
It also includes the features and functionality associated with the
messaging services.
Your phone also provides these message types:
• Voice Mail Messages: If you do not answer a call, the call may be
diverted to Voice Mail so that the caller can leave you a voicemail.
You can connect to the Voice Mail server anytime and check your
voice mail messages.
• Broadcast Messages (SIM dependent): Your phone can receive text
messages on various topics, such as traffic, news, weather
forecast, sports, entertainment from T-Mobile.
• Instant Messaging: You can log onto an online community and have
a chat with your friends or family by sending and receiving instant
messages.
Section 8: Other Messaging
77
t719.book Page 78 Thursday, June 29, 2006 1:44 PM
Voice Mail
This menu provides you with a way of accessing your Voice Mail server, if
provided by your network.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
4. Highlight Voice mail and press the Select soft key or
.
.
.
The following options are available:
• Call voice mail: before using the Voice Mail feature, you must
enter the Voice Mail server number obtained from your service
provider. You can then select this option and press the OK soft key
or
to listen to your voicemail messages. You can also connect
to the Voice Mail server by pressing and holding
in Idle mode.
• Voice server number: allows you to change the Voice Mail server
number.
Note: Voice Mail is a network feature. Please contact your service provider for
further details.
Broadcast Messages (SIM dependent)
This network service allows you to receive text messages on various topics,
such as the weather or traffic.
Please contact your service provider for further details.
78
t719.book Page 79 Thursday, June 29, 2006 1:44 PM
Instant Messaging
Instant Messaging
Instant Messaging (IM) is a way of sending short, simple messages that are
delivered immediately to users online at that moment.
Before using this feature, you need to subscribe to a messenger service. For
further details, contact your service provider.
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Instant Messaging and press the Select soft key or
.
3. Highlight the messenger service to which you subscribed using the
Up or Down Navigation key and press the Select soft key or
.
4. Highlight Sign on, Connect, or Sign in, depending on your
messenger service, and press the Select soft key or
.
5. Enter the required information, such as your ID and password, and
press the OK soft key.
Note: The information required for signing on will vary depending on the
instant messaging provider you are using.
6. Follow the on-screen instructions to read, reply to, compose, send,
and manage your IM account.
7. While on a conversation, press the Options soft key to access the
following options:
• Send IM: allows you to send the instant message you have
typed to the people you are chatting with.
• Insert: allows you to insert information, such as text
templates, emoticons, URL addresses in Favorites, and
Phonebook entries for your convenience.
Section 8: Other Messaging
79
t719.book Page 80 Thursday, June 29, 2006 1:44 PM
• Save conversation: saves your conversation while you are
chatting with people.
• Language select: allows you to change the language for
entering messages.
• End: ends the current conversation.
• Go to Contact list: allows you to access the IM contact list.
• Add contact: allows you to add the current contact to the IM
contact list, if the contact has not been saved before.
• Delete contact: deletes the contact if the current contact
already exists on the IM contact list.
Using the Instant Messenger Options
On the sign-on screen of the messenger, press the Options soft key to access
the following options:
• Sign on/Connect/Sign in: allows you to login to your IM account.
• Saved conversations (convers.): shows permanent records of
your IM conversations.
• Offline conversations (convers.): shows dynamic records of your
last 10 IM conversations.
• Settings/Preferences: allows you to change your default
community and community settings, such as automatic sign-in or
sounds.
• Help: provides various help information depending on the
messenger service you have selected.
80
t719.book Page 81 Thursday, June 29, 2006 1:44 PM
Instant Messaging
Managing IM Contacts
1. In Online mode, press the Options soft key.
2. Highlight Contact list and press the Select soft key or
access a list of your IM contacts.
to
3. Highlight a contact and press the Options soft key to access the
following options.
• Open: opens a new message screen allowing you to compose
and send an instant message to the contact.
• End: ends the conversation, if you are chatting with the
contact.
• Send IM: allows you to send an instant message to the
contact.
• Manage contact: allows you to add or delete contacts.
• Contact info.: displays the contact details.
• Block contact: allows you to block instant messages from
the contact.
• My status: allows you to change your presence status.
• Sign out: allows you to log out of the IM community.
4. When you have finished, press the Back soft key.
Section 8: Other Messaging
81
t719.book Page 82 Thursday, June 29, 2006 1:44 PM
82
t719.book Page 83 Thursday, June 29, 2006 1:44 PM
Section 9: Settings
Topics Covered
• Changing Settings
• Time & Date Settings
• Phone Settings
• Display Settings
• Sound Settings
• Network Service Settings
• Bluetooth
• Security Settings
• Voice Recognition Settings
• Reset Settings
• Message Settings
This section explains the sound and phone settings for your phone. It also
includes display settings, security settings, and extra settings associated
with your phone.
Changing Settings
To change a setting option, do as follows:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Settings and press the Select soft key or
.
3. Highlight a menu, for example, Phone settings, and press the
Select soft key or
.
4. Highlight a submenu, for example, Language, and press the
Select soft key or
.
Section 9: Settings
83
t719.book Page 84 Thursday, June 29, 2006 1:44 PM
5. Highlight the setting option you want, or press the Up or Down
Navigation key to change the setting.
6. Press the Select soft key or
to save changes.
Time & Date Settings
This menu allows you to change the current time and date displayed in the
idle screen.
The following options are available:
• Set time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time is displayed
in 12 hour or 24 hour format.
• Set date: allows you to enter the current month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY,
or YYYY/MM/DD format.
• Auto update: allows you to receive time information from your
service provider’s network.
On: the phone automatically updates the time and date according
to the current time zone using the network service.
Confirm first: the phone asks for a confirmation before the update.
Off: you need to manually set the time and date according to the
current time zone using the Time & Date menu.
Note: Automatic updates of time and date do not change the time you have
set for alarm settings.
84
t719.book Page 85 Thursday, June 29, 2006 1:44 PM
Phone Settings
Phone Settings
You can customize various phone system settings.
Language
This menu allows you to select a display language for Text language and
Input mode. Choose one of English, Français (French), and Español (Spanish).
If you select Automatic, the phone uses the same language as the SIM card.
Greeting message
This menu allows you to set a greeting to be displayed briefly when the phone
is switched on.
For details about entering characters, see "Section 5: How to Enter Text" on
page 43.
Extra settings
You can turn the automatic redialing or answering features on or off.
1. To turn a feature on, highlight the feature and press
mark displays in front of the option.
. A check
2. To turn a feature off, highlight the checked feature and press
The check mark no longer displays.
.
The following options are available:
• Auto redial: when this option is checked, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call. The interval between call attempts varies.
Section 9: Settings
85
t719.book Page 86 Thursday, June 29, 2006 1:44 PM
• Anykey answer: when this option is checked, you can
answer an incoming call by pressing any key, except for the
Reject soft key or the
key. To reject the call, press the
Reject soft key or the
key, or press and hold the Volume
keys. When this option is unchecked, you must press the
Accept soft key or the
key to answer a call.
• Open to answer: when this option is checked, you can simply
open the phone to answer a call. When it is unchecked, you
must open the phone and press a key to answer a call,
depending on the setting of the Anykey answer option.
3. When you have finished changing your settings, press the Save
soft key to save your settings. Otherwise, press the Back soft key.
Side keys
You can specify how the keys on the right side of your phone function in Idle
mode.
The following options are available:
• Selection (Middle): allows you to set
to confirm your selection,
or to function as one of the soft keys in Menu mode.
• Application (Middle): allows you to set
as a shortcut to access
one of your favorite menus when held down in Idle mode.
• Application (Short up): allows you to set the Up Volume key as a
shortcut to access one of your favorite menus in Idle mode.
• Application (Long up): allows you to set the Up Volume key as a
shortcut to access one of your favorite menus when held down in
Idle mode.
• Application (Short down): allows you to set the Down Volume
key as a shortcut to access one of your favorite menus in Idle mode.
86
t719.book Page 87 Thursday, June 29, 2006 1:44 PM
Display Settings
• Application (Long down): allows you to set the Down Volume
key as a shortcut to access one of your favorite menus when held
down in Idle mode.
Display Settings
In this menu, you can change various settings for the display and backlight.
Wallpaper
This menu allows you to change the background image to be displayed in Idle
mode.
The following options are available:
• Get more wallpaper: takes you to t-zones where you can
download wallpapers.
• Default wallpapers: allows you to choose from a list of wallpaper
embedded your phone.
• My downloads: allows you to choose one of the downloaded or
received images.
• My photos: allows you to choose one of the photos you have
captured with your phone.
To change the background image:
1. Highlight a wallpaper category and press the Select soft key or
.
2. Scroll to an image and press the Options soft key.
3. Highlight Select and press the Select soft key or
.
The image will be saved as your wallpaper.
Section 9: Settings
87
t719.book Page 88 Thursday, June 29, 2006 1:44 PM
Info display
This menu allows you to set the style and color of the text to be displayed in
Idle mode. Press the Left or Right Navigation key to change the settings and
press the Save soft key or
.
Interior display
You can change the color for the display components, such as title bars and
highlight bars. There are two different patterns to choose from.
Brightness/Contrast control
You can adjust the brightness of the main display and the external display,
or the contrast of the external display to see them better in different lighting
conditions.
1. Highlight LCD brightness control or Front LCD contrast control
and press the Select soft key or
.
2. Press the Left or Right Navigation key or the Volume keys to adjust
the settings.
3. Press the OK soft key or
to save your settings.
Backlight
In this menu, you can select the length of time that the backlight is on and
how much longer the display is illuminated before going off.
• On: allows you to set how long the backlight stays on. You can
select 15 seconds, 30 seconds, 1 minute, 3 minutes, or 10 minutes.
• Dim: allows you to set how much longer after the keypad backlight
goes off that the display remains lit. You can select Off, 15 seconds,
30 seconds, 1 minute, or 3 minutes.
88
t719.book Page 89 Thursday, June 29, 2006 1:44 PM
Display Settings
For example, if you set On for 30 seconds and Dim for 15 seconds, after 30
seconds the backlight of the display and keypad will turn off and 15 seconds
later the display will turn off.
Press the Left or Right Navigation key to adjust the settings and press the
Save soft key or
to save your settings.
Dialing display
This menu allows you to select the size or color of your dialing font.
To change the font size:
1. Highlight Font size and press the Select soft key or
.
2. Use the Left or Right Navigation key to select either Large,
Medium, or Small.
3. Press the Save soft key or
press the Back soft key.
to save your settings. Otherwise,
To change the color of the font:
1. Highlight Font color and press the Select soft key or
.
2. Use the Left or Right Navigation key to select either Basic (black),
Rainbow, or Monochrome.
3. If you select Rainbow, press the Down Navigation key to change
the color pattern.
If you select Monochrome, press the Down Navigation key and
select the monochrome color.
4. Press the Save soft key or
press the Back soft key.
to save your settings. Otherwise,
Section 9: Settings
89
t719.book Page 90 Thursday, June 29, 2006 1:44 PM
Show Caller Information
By turning this option on, caller information such as a name will be shown
on your display when your missed calls are listed. You can also select With
front LCD to have information displayed on the external display screen.
Sound Settings
You can customize various sound settings for your phone.
Incoming call
You can set up the options for the incoming call ringer.
• Get more MegaTones: allows you to access the website preset by
T-Mobile and download new MegaTones.
• Get more HiFi Ringers: allows you to access the website preset
by T-Mobile and download new HiFi Ringers.
• RingTone: allows you to select a ringtone. Use the Up or Down
Navigation key and select My sounds or Default sounds. Then,
press the Select soft key or
to select the ringtone.
• Volume: allows you to adjust the ringer volume to one of 5 levels.
Use the Right or Left Navigation key to increase or decrease the
volume level.
• Alert type: allows you to specify how you are to be informed of
incoming calls. Use the Right or Left Navigation key to select an
alert type. The following options are available:
90
Melody: the phone rings using the ringer melody selected in the
RingTone menu.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone vibrates 3 times and then starts
ringing.
t719.book Page 91 Thursday, June 29, 2006 1:44 PM
Sound Settings
Keypad tone
This menu allows you to change the sound settings for the keypad.
• On/Off: turn the keypad tone on or off.
• Keytone: select a tone that the phone sounds when you press a
key. Select one of the 5 tones.
• BlackBerry tone: select a different keypad tone for using
BlackBerry.
• Volume: allows you to adjust the keypad tone volume to one of 5
levels. Use the Right or Left Navigation key to increase or
decrease the volume level.
Message tone
This menu allows you to set the message tone for incoming Text, Picture,
Email, and Broadcast messages.
• Tone: allows you to select a ringtone. You can choose one of 10
MSG tones.
• Alert type: This menu allows you to specify how you are to be
informed of incoming messages. Use the Right or Left Navigation
key to select an alert type. The following options are available:
Melody: the phone rings using the ringer melody selected in the
Tone menu.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone vibrates 3 times and then starts
ringing.
Off: the phone neither vibrates nor rings.
Section 9: Settings
91
t719.book Page 92 Thursday, June 29, 2006 1:44 PM
• Repetition: allows you to set the phone to repeat alerting you to an
incoming message. If you do not want the phone to repeat alerting,
select Once. The phone will alert only one time when a message
comes in.
Power on/off
This menu allows you to select the melody that the phone sounds when it is
switched on and off.
To turn off the sound, select Off.
Folder tone
This menu allows you to select the melody that the phone sounds when you
open or close the phone. You may choose between four different tones.
To turn off the sound, select Off.
Silent mode
This menu allows you to select how the phone reacts instead of making
sounds in Silent mode. You may choose between Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
92
1. To turn a given tone on, press
the option.
. A check mark displays in front of
2. To turn a given tone off, press
displays in front of the option.
. The check mark no longer
t719.book Page 93 Thursday, June 29, 2006 1:44 PM
Network Service Settings
The following options are available:
• Minute minder: allows you to set whether or not the phone beeps
every minute during an outgoing call to keep you informed of the
length of your call.
• Connection tone: allows you to set whether or not the phone
beeps when an outgoing call is connected to the system.
• Alerts on call: allows you to set whether or not the phone beeps
when you receive a new message or the time for an alarm comes
during a call.
Network Service Settings
You can set up network services supported by your service provider.
Call forwarding
This network service enables incoming calls to be rerouted to the number
that you specify.
Example: You can forward your business calls to a colleague while you are on
holiday.
To set your call forwarding options:
1. Scroll to a call forwarding option by pressing the Up or Down
Navigation key and then press the Select soft key or
.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when your phone is busy.
Section 9: Settings
93
t719.book Page 94 Thursday, June 29, 2006 1:44 PM
• No reply: calls are forwarded when your phone is not
answered.
• Unreachable: calls are forwarded when you are not in a
service area or when your phone is switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, Voice calls or Data calls, by pressing the
Up or Down Navigation key, and then press the Select soft key or
.
The current status displays. If the option has already been set, the
number to which the calls are forwarded displays.
3. To activate call forwarding, select Activate by using the Left or
Right Navigation key.
To deactivate call forwarding, select Deactivate by using the Left
or Right Navigation key.
4. Enter the number to which the calls are to be forwarded in the
Divert to text box and press the Select soft key or
. To enter an
international code, press and hold
until the + sign displays.
The phone sends your settings to the network and the network’s
acknowledgement displays.
Call barring (SIM dependent)
Call Barring allows you to restrict specific types of incoming and outgoing
calls for your phone. This is useful if you allow someone to use your phone
for a short period of time.
To set your call barring options:
1. Scroll to a call barring option by pressing the Up or Down
Navigation key and then press the Select soft key or
.
94
t719.book Page 95 Thursday, June 29, 2006 1:44 PM
Network Service Settings
The following options are available:
• All outgoing: all outgoing calls are prohibited.
• International: all international calls are prohibited.
• International except home.: only allow calls to numbers
within the current country when you are abroad, and to your
home country.
• All incoming: all incoming calls are prohibited.
• Incoming while abroad: allows you to prohibit incoming
calls when you use your phone outside of your home service
area.
• Cancel all: cancels all call barring settings, allowing calls to
be sent and received normally.
• Change barring password: allows you to change the call
barring password obtained from your service provider.
2. Select the type of calls, Voice calls or Data calls, by pressing the
Up or Down Navigation key, and then press the Select soft key or
.
3. To activate call barring, select Activate by using the Left or Right
Navigation key.
To deactivate call barring, select Deactivate by using the Left or
Right Navigation key.
Call waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data
calls.
Section 9: Settings
95
t719.book Page 96 Thursday, June 29, 2006 1:44 PM
To set your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to which the call
waiting option is to be applied by pressing the Up or Down
Navigation key and then press the Select soft key or
.
The screen informs you whether call waiting is activated or
deactivated.
2. Highlight Activate or Deactivate and press the Select soft key or
.
The phone sends your settings to the network and the network’s
acknowledgement displays.
Note: Select the Cancel all option to deactivate Call waiting on all voice calls and
data calls.
Network selection
The Network Selection feature enables you to manually select the network
used when roaming outside of your home area, or let the phone
automatically select an available one.
Note: You can select a network other than your home network only if there is a
valid roaming agreement between the two.
To change Network Selection mode:
1. Highlight Search now and press the Select soft key or
.
2. Press the Up or Down Navigation key until the network you want
highlights and then press the Select soft key or
.
The phone will scan for that network and you will be connected.
96
t719.book Page 97 Thursday, June 29, 2006 1:44 PM
Network Service Settings
To change the default setting:
1. Highlight Default setup and press the Select soft key or
.
2. Highlight either Automatic or Manual and press the Select soft
key or
.
3. If you select Automatic, you are connected to the first available
network when roaming.
If you select Manual, press the Up or Down Navigation key until
the network you want highlights and then press the Select soft key
or
.
The phone will scan for that network and you will be connected.
Caller ID
You can prevent your phone number from being displayed on the phone of the
person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other person’s
phone.
• Send number: your number is sent each time you make a call.
Section 9: Settings
97
t719.book Page 98 Thursday, June 29, 2006 1:44 PM
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring
a physical connection.
Unlike infrared, you don't need to line up the devices to beam information
with Bluetooth. If the devices are within a range of one another, you can
exchange information between them, even if they are located in different
rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option allows you to turn Bluetooth On or Off. Make a selection and
press the Select soft key or
.
My devices
This option allows you to search for new Bluetooth devices.
1. Highlight Search new device and press the Select soft key or
The phone will search for available devices.
.
2. Highlight the device you want and press the Select soft key or
.
3. Enter a Bluetooth PIN and press the OK soft key or
. When the
owner of the device enters the same PIN, the two devices are
paired and connected.
My visibility
This option allows you to turn your visibility On or Off. Make a selection and
press the Select soft key or
.
98
t719.book Page 99 Thursday, June 29, 2006 1:44 PM
Bluetooth
My phone name
This option shows the name given to your phone for Bluetooth purposes. You
can edit the name if needed. This name will display on other devices when
they search for available Bluetooth devices.
Security modes
This option allows you to set Security mode for Bluetooth to On or Off. Make
a selection and press the Select soft key or
. When Security mode is
enabled, users of other devices, except for authorized ones, must enter the
PIN each time they access your phone.
Features
This option shows the service profiles that you can use on your phone via a
Bluetooth connection.
Actually, the Bluetooth specification is a protocol that describes how the
short-range wireless technology works, whereas individual profiles
describe the services supported by individual devices. Profiles reduce the
chance that different devices will not work together.
The following service profiles are available:
• Headset: the remote Bluetooth headset enables outgoing and
incoming calls.
• Handsfree: the remote Bluetooth car kit enables outgoing and
incoming calls.
• Serial port: the remote Bluetooth device acts as a virtual serial
port.
• Dial up networking: the remote Bluetooth device enables Internet
access through a phone modem.
Section 9: Settings
99
t719.book Page 100 Thursday, June 29, 2006 1:44 PM
• File transfer: the remote Bluetooth device enables users to send
and receive files from their handset to others.
• Object push: the remote Bluetooth device enables the transfer of
personal data (e.g. vCard, vCalendar, etc.) to other devices.
Security Settings
The Security feature enables you to restrict the use of your phone by others
and to restrict the types of calls. Various codes and passwords are used to
protect the features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter your PIN each time
the phone is switched on. Consequently, any person who does not have your
PIN cannot use your phone without your permission.
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN, provided the PIN Check
feature is enabled. You must enter the current PIN before you can specify a
new one.
100
t719.book Page 101 Thursday, June 29, 2006 1:44 PM
Security Settings
Once you have entered a new PIN, you are asked to confirm it by entering it
again.
Change password
This feature allows you to change your current password to a new one. It is
preset to 00000000 at the factory.
1. Enter the default password, 00000000, and press the OK soft key
or
.
2. Enter a new 4- to 8-digit password and press the OK soft key or
.
3. Enter the new password again and press the OK soft key or
.
FDN mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card, allows you
to restrict your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in the Phonebook.
You must enter your PIN2. You can obtain your PIN2 from your
service provider.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a new
one. You must enter the current PIN2 before you can specify a new one. Once
you have entered a new PIN2, you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not
display.
Section 9: Settings
101
t719.book Page 102 Thursday, June 29, 2006 1:44 PM
Voice Recognition Settings
You can adjust the settings and preferences for VoiceSignal by opening the
Voice recognition settings menu.
Note: You can also press the Right Navigation key in Idle mode and press the
Settings soft key to access the Voice Recognition setting options.
The following options are available:
• Choice lists: if VoiceSignal is not absolutely confident that it has
correctly identified a name or number, it can display a choice list of
up to three possibilities, and prompt you to confirm the correct one.
You can control when choice lists appear by changing the Choice
Lists setting to the following:
Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among multiple
alternatives.
Always On: when there are multiple alternatives, VoiceSignal
always displays a choice list.
Always Off: VoiceSignal never displays a choice list. Instead, the
application picks the best from among the possible choices.
• Sensitivity: in VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone frequently
does not recognize names, numbers, or commands, and rejecting
too little, which means it frequently recognizes something even if
nothing was said. When VoiceSignal rejects an utterance, it
displays a message such as “Please repeat…” or “No match
found.”
102
t719.book Page 103 Thursday, June 29, 2006 1:44 PM
Voice Recognition Settings
If you frequently experience these messages, you might be able to
get better recognition by adjusting the Sensitivity setting toward
Reject Less.
If you frequently experience false activations (VoiceSignal detects a
wrong match), you might be able to get better performance by
adjusting the Sensitivity setting toward Reject More.
• Digit dialing: You can adapt digit dialing to your voice.
Adapt digits: lets you adapt digits, which can improve voice
recognition of phone numbers. Adaptation takes about 60 seconds.
Reset digits: erases any digit adaptation you have done and resets
digit recognition to the factory default. If you have not adapted
digits, this option is grayed out.
• Sound: you can customize the VoiceSignal user interface by turning
playback on or off for prompts, names, and numbers. You can also
change the speed and volume of name playback.
Prompts: turns playback on or off for prompts such as “Please say
a command.”
Digits: turns playback on or off for digits, for example, when
confirming a phone number.
Names: turns playback on or off for names.
Name settings: adjusts the speed and volume of name playback.
Speakerphone: turns the Speakerphone feature on when initiating
the Voice recognition feature.
• About: displays information about VoiceSignal including version
number, build number, and device number.
Section 9: Settings
103
t719.book Page 104 Thursday, June 29, 2006 1:44 PM
Reset Settings
In this menu, you can reset your phone’s settings to their default settings.
The following options are available:
• All settings: Phone, Display, and Sound settings will be returned to
default values.
• Phone settings: only phone settings will be returned to default
values.
• Display settings: only display settings will be returned to default
values.
• Sound settings: only sound settings will be returned to default
values.
To reset your settings:
1. Highlight one of the options and press
front of the option.
to place a check mark in
2. Press the Reset soft key.
3. You will be prompted with Reset settings?. Press the Yes soft key.
4. Enter the 4- to 8-digit password and press the OK soft key or
.
Note: The password is preset to 00000000. To change this password, see
"Change password" on page 101.
104
t719.book Page 105 Thursday, June 29, 2006 1:44 PM
Message Settings
Message Settings
You can set up various options for using the messaging services. You can also
select the calendar view and specify options for using BlackBerry.
Email
The following options are available for email settings:
• Email reconciliation: allows you to set up the options for
synchronizing with the email server.
Delete on: deletes an email in the phone’s memory or on the server
after retrieving. If you select Prompt, the phone will ask you to
delete an email.
Wireless reconciliation: allows whether the phone automatically
synchronizes emails with the server when retrieving.
On conflicts: allows you to set the priority of synchronization when
your email data in the phone and on the server is not reconciled.
• Menu setup: allows you to set the length of time an email displays
its details in 3-line view after an email is highlighted on the
Messages list.
Text message
The following options are available for sending text messages.
• Service center: allows you to store or change the number of your
message center, which is required for sending messages. You must
obtain this number from your service provider.
Section 9: Settings
105
t719.book Page 106 Thursday, June 29, 2006 1:44 PM
• Destination address: allows you to enter a number that you
would like to send all messages to. You can still send message to
others, but this number will always appear on the Send list.
• Validity period: allows you to set the length of time your text
messages are stored at the message center while attempts are
made to deliver them.
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network supports
this service.
• Delivery report: when this option is checked, the network informs
you whether or not your message has been delivered.
Picture message
The following options are available for sending and receiving picture
messages.
Send settings
• Delivery report: when this option is enabled, the network informs
you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry date: the expiration date is how long the message receiver
has to retrieve the message.
• Delivery time: you can set a delay time before the phone sends
your messages.
106
t719.book Page 107 Thursday, June 29, 2006 1:44 PM
Message Settings
Receive settings
• Anonymous reject: you can set your phone to automatically reject
anonymous messages.
• Ads allowed: allows you to receive advertisements.
• Report allowed: allows the network to inform the sender when a
message has been delivered to you.
Broadcast message
The following options are available for receiving Broadcast messages.
• Receive: allows you to set whether or not the phone receives
broadcast messages.
• Channel: allows you to select the channels from which you want to
receive broadcast messages. Please contact your service provider
for further details.
• Language: allows you to select the preferred languages in which
broadcast messages display on your phone.
Calendar view mode
Use this option to select the default for your Calendar view. Select between
Month view, Week view, or Day view. After making your selection, press the
Save soft key or
. When you access the Calendar menu, the calendar
appears in the selected view mode.
Section 9: Settings
107
t719.book Page 108 Thursday, June 29, 2006 1:44 PM
BlackBerry Options
Network
You can set options for a network connection.
• BlackBerry connection: refreshes the network connection to the
BlackBerry service.
• Network: allows you to suspend the current network connection,
or resume the connection.
Host routing table
You can register your phone to a BlackBerry infrastructure so that the phone
is properly connected to a cellular network. Please contact your service
provider for further details on the Host routing table (HRT).
Message services
You can select the default email account.
Owner
You can set up BlackBerry owner information.
• Owner name: allows you to set your BlackBerry user name.
• Owner info: allows you to set BlackBerry user information.
Note: You can access the BlackBerry owner information by pressing the Menu soft
key in Idle mode and then pressing
,
,
, and
.
108
t719.book Page 109 Thursday, June 29, 2006 1:44 PM
Message Settings
Security
You can set options for securing BlackBerry.
• Password: allows you to enable or disable the use of the
password. To enable the Privacy feature, you need to enable the
use of the password first.
• Security timeout: allows you to set an interval for the phone to
ask for the password.
• Privacy: allows you to enable or disable Privacy. Once it is enabled,
you need to enter the password each time you access any phone
functions.
Note: If you fail to enter the correct password 10 times, you are prompted to
reset the phone. After resetting the phone, the Privacy feature is disabled
and Email, Calendar, and Corporate Email Address lookup are erased.
• Change password: allows you to set a password or change it.
Service book
Service book determines which BlackBerry services are available on your
phone. In this option, you can view the list of services, such as Mail, Address
lookup, and Calendar that your device is registered for. If the Mail service
book is displayed, then your device is ready to use the BlackBerry email
service (you need to set up your phone along with an email account on page
113). You need to consult with your system administrator at your work place
or simply connect to t-zones for setting up an Internet email account.
GPRS review
You can check GPRS information, such as MCC, MNC, IMEI, IMSI, ICCID,
BlackBerry PIN number, product name, device type, device class, and system
and stack versions.
Section 9: Settings
109
t719.book Page 110 Thursday, June 29, 2006 1:44 PM
IT Policy
You can check the current status of the security settings for your phone.
• IT Policy name: shows the IT policy name.
• Last updated: shows the date when the IT policy has been
updated from the BlackBerry Enterprise Server.
• Set password timeout: shows the expiration time (minute) for the
password input. The phone will ask you to enter the password in
the specified amount of time.
• Max security timeout: shows the maximum security expiration
time (minute). The security will be disabled after the specified
amount of time.
• User can change timeout: shows whether or not you are able to
change the expiration time length.
• Password required: shows whether or not the phone requires a
password.
• Password pattern check: shows the pattern of your password.
• Maximum password age: shows the maximum age of the
password before you are prompted to change it.
• Minimum password length: shows the minimum length of an
acceptable security password.
• Password attempts: shows how many attempts the phone
permits when you enter a wrong password.
• Long-term timout: shows whether the long-term security
expiration time is enabled or disabled on the phone. When it is
enabled, the phone prompts you for your password every hour.
110
t719.book Page 111 Thursday, June 29, 2006 1:44 PM
Message Settings
• User can disable PW: shows whether or not you are able to
disable the password.
• Email reconciliation: shows whether the email reconciliation is
enabled or disabled. When it is enabled, the phone email status is
automatically reconciled with the email status stored at the server.
• Allow Bcc recipients: shows whether your BlackBerry Enterprise
Server allows you to send messages to the Bcc recipients.
Reset BlackBerry data
You can clear all BlackBerry data and reset your BlackBerry settings.
Section 9: Settings
111
t719.book Page 112 Thursday, June 29, 2006 1:44 PM
112
t719.book Page 113 Thursday, June 29, 2006 1:44 PM
Section 10: Using BlackBerry Email
Topics Covered
• Setting Up BlackBerry Internet Email
• Managing BlackBerry Internet Email
• Setting Up BlackBerry Enterprise Server
• Synchronizing Calendar and Contacts
• Troubleshooting
This section describes how to set up and manage BlackBerry email accounts
for sending and receiving emails. T-Mobile offers you the ability to receive
emails on your phone from two sources:
• Via BlackBerry® Internet Email
With BlackBerry Internet Email, you can retrieve emails from your
business or personal email account (such as your Yahoo® account)
on your phone. You can add up to five different accounts. You can
also create a new BlackBerry email address that is specific to your
phone. See “Setting Up BlackBerry Internet Email” for setup
instructions on page 114.
Note: You cannot set up your account to retrieve emails from your Hotmail
account.
• Via your organization’s BlackBerry Enterprise Server™
With BlackBerry Enterprise Server, you can access corporate emails
and calendar from your phone. See "Setting Up BlackBerry
Enterprise Server" for setup instructions on page 118.
Section 10: Using BlackBerry Email
113
t719.book Page 114 Thursday, June 29, 2006 1:44 PM
Note: The recommended method for accessing corporate email is through
the BlackBerry Enterprise Server. You can receive corporate emails using
BlackBerry Internet Email if you do not have access to a BlackBerry
Enterprise Server, and your organization uses Microsoft Exchange® and
supports Outlook Web Access.
Setting Up BlackBerry Internet Email
To send and receive emails from your personal email account (such as your
Yahoo® account) on your phone, you must first set up your phone for
BlackBerry Internet Email. Once you have set up your phone, you can then add
the email account.
Setting Up an Email Service Type
1. Verify that your phone is connected to the wireless network and
that you are in an area of wireless coverage.
2. In Idle mode, press the Menu soft key to access Menu mode.
3. Highlight Messages and press the Select soft key or press
.
4. Press the Compose soft key.
5. Highlight Setup Email and press the Select soft key.
6. Highlight BlackBerry Internet Email and press
.
The phone displays, “BlackBerry initializes” message followed by
“BlackBerry connected” message. When successfully connected,
you will see
on top of the phone screen.
7. Press the
114
key to go back to Idle mode.
t719.book Page 115 Thursday, June 29, 2006 1:44 PM
Setting Up BlackBerry Internet Email
Adding an Email Account
Messages from all accounts will be delivered to the Messages folder on
your phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
.
3. Highlight Setup BlackBerry Internet email account and press
the Select soft key or
.
4. Scroll to your time zone and press
.
5. Carefully read and accept the Terms and Conditions.
6. Scroll to Yes and press
.
7. Type the e-mail address and password.
8. Confirm the password and select Next.
Depending on the e-mail account that you add, you may be
prompted to select an account type. Depending on the account
type, you may be prompted for the following information:
• E-mail Server: Type the e-mail server address for your
Internet Service Provider (ISP) (example, mail.ispname.com).
Contact your ISP if you do not know the e-mail server address.
• User Name: The username you use to log in your e-mail
account.
• Outlook Web Access URL: Type the Web address for your
Microsoft® Outlook account.
• Account Name: Type the mailbox name for your Microsoft®
Outlook account.
Section 10: Using BlackBerry Email
115
t719.book Page 116 Thursday, June 29, 2006 1:44 PM
• Use SSL: Enable the Secure Sockets Layer encryption for
retrieving messages from this account, if it is supported by
your ISP.
Note: If you add a Microsoft® Outlook or IBM® Lotus® Notes® e-mail
account, you may be prompted to install the BlackBerry Mail Connector
application on your computer. Follow instructions on the screen to install
the Mail Connector from a computer connected to your work network.
9. Click Next. If the address was successfully added to your
BlackBerry® Internet E-mail account, you will receive a
confirmation message.
10. Click OK.
Creating a New BlackBerry Internet Email Address
You can create a new BlackBerry email address (xxxx@tmo.blackberry.net)
that is specific to your phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
.
3. Highlight Setup BlackBerry Internet email account and press
the Select soft key or
.
4. Highlight E-mail Accounts if you see this option available and
proceed to Step 5.
5. Highlight Create a BlackBerry e-mail address and press
.
6. In the Username field, type the name that you want before the @
symbol in the xxxxx@tmo.blackberry.net email address.
7. If the user name entered is available, you will receive a message on
your phone letting you know that account creation was successful.
Click OK.
116
t719.book Page 117 Thursday, June 29, 2006 1:44 PM
Managing BlackBerry Internet Email
8. If the user name you wish to use is unavailable, you will be
prompted to enter a different user name.
9. Select Next. If the BlackBerry email address was successfully
created, you will receive a confirmation message.
10. Select OK.
Managing BlackBerry Internet Email
You can manage settings and options of the email accounts that you have
configured directly from your phone or from a computer.
Using Your Phone:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
.
3. Highlight Setup BlackBerry Internet email account and press
the Select soft key or
.
4. Highlight E-mail Accounts and press
.
5. Highlight the email account that you want to manage and press
.
6. Highlight Edit and press
.
Now you can manage existing accounts, create new accounts, or
change your settings.
Section 10: Using BlackBerry Email
117
t719.book Page 118 Thursday, June 29, 2006 1:44 PM
Using Your Computer:
The following requirements must be met to log in and manage account
options using the computer:
• Internet Browser: Microsoft® Internet Explorer version 6.0 (or later)
• Operating System: Windows® 2000 SP4 or Windows® XP SP2
1. On your computer, go to My T-Mobile at http://my.t-mobile.com.
2. Log in to My T-Mobile.
3. Click the BlackBerry Internet E-mail link. Now you can manage
existing accounts, create new accounts, or change your settings.
Setting Up BlackBerry Enterprise Server
Before starting, you must:
1. Set up your phone to receive emails.
2. Install the Samsung PC Studio software on your computer.
3. Install the USB driver on your computer.
4. Install the Desktop Manager for Samsung software on your
computer.
Requirements for installing:
• Active BlackBerry Enterprise Server account (If you are not sure,
contact your system administrator to verify account settings.)
• Windows® XP SP2 or Windows 2000 SP4
• USB 1.0
• CD-ROM drive
118
t719.book Page 119 Thursday, June 29, 2006 1:44 PM
Setting Up BlackBerry Enterprise Server
Setting Up Your Phone to Receive Emails
To send and receive emails on your phone, you must first set up your phone
for BlackBerry Enterprise Server.
1. Verify that your phone is connected to the wireless network and
that you are in an area of wireless coverage.
2. On your phone, in Idle mode, press the Menu soft key to access
Menu mode.
3. Highlight Messages and press the Select soft key or
.
4. Press the Compose soft key.
5. Highlight Setup Email and press the Select soft key or
.
Note: If you do not see Setup Email, see the Troubleshooting BlackBerry
Enterprise Server Email section.
6. Highlight BlackBerry Enterprise Server and press
.
The phone displays the “BlackBerry initializes” message followed
by the “BlackBerry connected” message. When successfully
connected, you will see
on top of the phone screen.
Installing Software and Drivers
Important!: Be sure to install the Samsung PC Studio software first before
installing the USB driver and Desktop Manager for Samsung software.
1. Insert the CD (that came with your phone) into your computer’s CDROM drive. The Select Language screen opens.
Section 10: Using BlackBerry Email
119
t719.book Page 120 Thursday, June 29, 2006 1:44 PM
2. Click English. The main installation screen opens.
Note: Do not exit out of this screen because you will need to go back to this
screen to install the USB driver and the Desktop Manager for Samsung
software.
3. Click Install Samsung PC Studio.
4. Follow the instructions on the screen until you finish.
120
t719.book Page 121 Thursday, June 29, 2006 1:44 PM
Setting Up BlackBerry Enterprise Server
Note: During the installation, the Wizard will instruct you to connect your phone
to your computer using the USB cable. When you have successfully installed
the software, the Samsung PC Studio screen opens.
5. Minimize the Samsung PC Studio screen to go back to the main
installation screen.
6. Click Install USB Driver.
7. Follow the instructions on the screen until you finish installing the
USB driver.
8. Go back to the main installation screen and click Install Desktop
Manager for Samsung.
Section 10: Using BlackBerry Email
121
t719.book Page 122 Thursday, June 29, 2006 1:44 PM
9. Double-click Samsung_BBConnect_Desktop_Setup_2.1.1.6.
10. Follow the instructions on the screen until you finish installing the
BlackBerry Connect™ Desktop software.
11. Open the BlackBerry Connect Desktop for Samsung software on
your computer.
12. Make sure your phone is connected to your computer and you see
on top of the phone screen.
13. Click the Connect button.
14. Configure the options you wish for your BlackBerry service.
15. Close the BlackBerry Connect Desktop software when done.
122
t719.book Page 123 Thursday, June 29, 2006 1:44 PM
Synchronizing Calendar and Contacts
Synchronizing Calendar and Contacts
You can synchronize Calendar and Contacts with your phone.
• If you are using BlackBerry Enterprise Server version 2.1 or higher
Calendar
Wireless synchronization of Calendar events is supported. This
means that any changes you make to your Calendar in your Outlook
or Lotus Notes are synchronized with your phone wirelessly.
Important!: If you are using BlackBerry Enterprise Server, DO NOT use
Samsung PC Studio to synchronize your Calendar or you will disable
wireless calendar synchronization.
Note: Your phone stores a maximum of 256 calendar events. To clear out old
events and store new ones, synchronize your phone with Outlook on your
computer.
Contacts
To synchronize Contacts information, you need to install the
Samsung PC Studio software to your computer. Connect your phone
to your computer with the USB cable. Open the Samsung PC Studio
software and click Synchronize. Click Yes to grant access to your
Microsoft Outlook folders. Select 10 Minutes in the drop-down
menu. This will ensure that your computer has enough time to
synchronize all your contacts.
Note: You can store a maximum of 1,000 contacts on your phone.
Section 10: Using BlackBerry Email
123
t719.book Page 124 Thursday, June 29, 2006 1:44 PM
• If you are not using BlackBerry Enterprise Server
Calendar and Contacts
To synchronize Calendar and Contacts information, you need to
install the Samsung PC Studio software to your computer. Connect
your phone to your computer with the USB cable and use the
Samsung PC Studio software to synchronize.
Installing Software and Driver
Important!: Be sure to install the Samsung PC Studio software first before
installing the USB driver.
1. Insert the CD (that comes with your phone) into your computer’s CDROM drive. The Select Language screen opens.
2. Click English. The main installation screen opens.
Note: Do not exit out of this screen because you will need to go back to this
screen to install the USB driver.
3. Click Install Samsung PC Studio.
4. Follow the instructions on the screen until you finish. When you
have successfully installed the software, the Samsung PC Studio
screen opens.
5. Minimize the Samsung PC Studio screen to go back to the main
installation screen.
6. Click Install USB Driver.
7. Follow the instructions on the screen until you finish installing the
USB driver.
124
t719.book Page 125 Thursday, June 29, 2006 1:44 PM
Synchronizing Calendar and Contacts
Synchronizing with Microsoft Outlook on Your Computer
Note: If you are using BlackBerry Enterprise Server to wirelessly synchronize your
phone’s Calendar with your corporate email system, then DO NOT use this method
to synchronize your phone’s Calendar with Microsoft Outlook on your computer.
1. Connect the phone to the computer using the USB cable.
2. Open the Samsung PC Studio software on your computer.
3. Click Synchronize to start the synchronization process.
4. Verify that Phonebook and Appointment check boxes are
selected to synchronize data between your phone and your Outlook
Contacts and Calendar (on a computer).
Important!: If you are using BlackBerry Enterprise Server to wirelessly
synchronize your Calendar, then DO NOT select Appointment.
5. Click Sync to perform a two-way synchronization between your
phone and your computer.
You will be prompted to allow access to Microsoft Outlook. Click
Yes and change the default time to 10 Minutes to allow enough
time to synchronize the contents of your Calendar and Contacts.
Section 10: Using BlackBerry Email
125
t719.book Page 126 Thursday, June 29, 2006 1:44 PM
Troubleshooting
How do I clear Phonebook settings and start over?
1. In Idle mode, press the Ph.book soft key.
2. Highlight Management and press the Select soft key or
3. Highlight Delete all and press the Select soft key or
.
.
4. Press
to delete all entries stored in both the phone memory and
on the SIM card. You can also select Phone or SIM card
individually.
5. Press the Delete soft key or
.
6. Enter the password.
Note: The password is preset to 00000000. To change this password, see
"Change password" on page 101.
How do I clear my configuration settings and start over?
1. In Idle mode, press the Menu soft key.
2. Highlight Settings and press the Select soft key or
.
3. Highlight Reset Settings and press the Select soft key or
.
4. Press
to delete all settings. You can also select settings
individually.
5. Press the Reset soft key or
.
6. Select Yes to confirm reset settings.
7. Enter the password.
Note: The password is preset to 00000000. To change this password, see
"Change password" on page 101.
126
t719.book Page 127 Thursday, June 29, 2006 1:44 PM
Troubleshooting
Important!: Games, ringtones, and wallpapers you have purchased from T-Mobile
will NOT be deleted.
How do I clear BlackBerry settings and start over?
1. In Idle mode, press the Menu soft key.
2. Highlight Settings and press the Select soft key or
.
3. Highlight Message settings and press the Select soft key or
.
4. Highlight BlackBerry options and press the Select soft key or
.
5. Highlight Reset BlackBerry data and press the Select soft key or
.
6. Press
when you see the message “Resetting BlackBerry will
erase all data & settings and phone will reboot.”
USB synchronization error “Cannot communicate with
device”
Do not run both the Samsung PC Studio and BlackBerry Connect Desktop
software at the same time. Close one application and only run one or the
other at any given time.
COM port error when starting Samsung PC Studio or
BlackBerry Connect Desktop for Samsung
Do not run both the Samsung PC Studio and BlackBerry Connect Desktop for
Samsung at the same time. Close one application and only run one or the
other at any given time.
Section 10: Using BlackBerry Email
127
t719.book Page 128 Thursday, June 29, 2006 1:44 PM
Your phone stopped sending and receiving BlackBerry
Enterprise Server™ Emails
1. Make sure you are in an area with wireless coverage.
2. In Idle mode, press the Menu soft key.
3. Highlight Settings and press the Select soft key or
.
4. Highlight Message settings and press the Select soft key or
.
5. Highlight BlackBerry options and press the Select soft key or
.
6. Highlight Host routing table and press the Select soft key or
.
7. Highlight BlackBerry Enterprise Server and press the Options
soft key.
8. Select Register now.
9. Use the Samsung BlackBerry Connect Desktop software on your
computer to synchronize your phone with your BlackBerry
Enterprise Server. This will restore wireless calendar and email
synchronization.
Your phone stopped sending and receiving BlackBerry
Internet Emails
• Did you change your hardware?
Each t719 has a unique BlackBerry PIN. Follow the steps in
"Managing BlackBerry Internet Email" to change your PIN online on
page 117.
• If you do not see
on top of the phone screen:
1. In Idle mode, press the Menu soft key.
2. Highlight Settings and press the Select soft key or
128
.
t719.book Page 129 Thursday, June 29, 2006 1:44 PM
Troubleshooting
3. Highlight Message settings and press the Select soft key or
.
4. Highlight BlackBerry options and press the Select soft key or
.
5. Highlight Host routing table and press the Select soft key or
.
6. Highlight BlackBerry Internet Email and press the Options soft
key.
7. Select Register now.
• Only five separate BlackBerry Internet Email accounts can be
set up on the phone.
I do not see
on top of the phone screen
1. Make sure you are in an area with wireless coverage.
2. In Idle mode, press the Menu soft key.
3. Highlight Settings and press the Select soft key or
.
4. Highlight Message settings and press the Select soft key or
.
5. Highlight BlackBerry options and press the Select soft key or
.
6. Highlight Host routing table and press the Select soft key or .
• If you are using BlackBerry Internet Email, press the Options
soft key, then select Register now. Use the Samsung PC
Studio to synchronize your calendar and contacts.
• If you are using a BlackBerry Enterprise Server, press the
Options soft key, then select Register now. Use the
BlackBerry Connect Desktop software to synchronize your
phone with your BlackBerry Enterprise Server. This will restore
wireless calendar and email synchronization.
Section 10: Using BlackBerry Email
129
t719.book Page 130 Thursday, June 29, 2006 1:44 PM
Calendar is not up-to-date
A maximum of 256 calendar events can be stored on your phone. If your
calendar is full, synchronize your phone with Microsoft Outlook again. Old
entries are automatically deleted.
• If you are using BlackBerry Internet Email, use the Samsung PC
Studio to synchronize your calendar and contacts.
• If you are using BlackBerry Enterprise Server, use the BlackBerry
Connect Desktop software to synchronize your phone with your
BlackBerry Enterprise Server. This will restore wireless calendar
and email synchronization.
Contacts do not appear in Phonebook
• A maximum of 1,000 contacts can be stored on the phone.
• If you are using BlackBerry Internet Email, use the Samsung PC
Studio to synchronize your calendar and contacts.
• If you are using BlackBerry Enterprise Server, use the Samsung PC
Studio software to synchronize your phone with your contacts.
Note: Contacts do not synchronize wirelessly.
130
t719.book Page 131 Thursday, June 29, 2006 1:44 PM
Section 11: Applications
Topics Covered
• Recording Voice Notes
• Using the Calendar
• Using Alarm
• Using File Manager
• Using Calculator
• Playing Games
• Using Voice Recognition
• Viewing World time
• Using a Unit Conversion
• Using the Timer
• Using the Stopwatch
• Setting Up BlackBerry Email Service
• Accessing Get More Help
This section outlines the various applications available on your phone.
Your phone provides you with applications for your convenience and
entertainment, such as a voice recorder, calendar, alarm clock, calculator,
games, converter, and file manager.
Section 11: Applications
131
t719.book Page 132 Thursday, June 29, 2006 1:44 PM
Recording Voice Notes
In this menu, you can record a voice note of up to one minute long. You can
also send the voice note by Picture message.
Recording and Saving a Voice Note
When you access this menu, a voice recorder appears on the screen.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Voice notes and press the Select soft key or
3. Press the Record soft key or
.
to start recording.
4. Record a voice note by speaking into the microphone.
The voice recorder shows the elapsed time on the left of the
progress bar and the maximum recording time on the right.
5. When you are finished, press the Stop soft key or the Down
Navigation key.
The voice note is saved to your Voice list.
6. Press the Options soft key to access the following options:
• Send: allows you to send the voice note.
• Play: plays back the voice note.
• Re-record: discards the Voice note and enables you to record
another one.
• Set default destination: allows you to set the default
destination. Once a destination is set as a default, the phone
will ask you if you want to send the voice note to the
destination when you stop recording.
• Save: saves the voice note and continues to the Send option.
7. Highlight Save and press the Select soft key or
132
.
t719.book Page 133 Thursday, June 29, 2006 1:44 PM
Recording Voice Notes
Sending a Voice Note
You can send a voice note immediately after recording it.
1. After recording a voice note, press the Send soft key.
2. Highlight one of the following options and press the Select soft key
or
:
• Recent log: allows you to select one of the recipients of your
previous messages.
• Phonebook: allows you to select the phone number you want
from your Phonebook.
• Phone number: allows you to enter a phone number.
• Email address: allows you to enter an email address.
• My Album: allows you to send the voice note to your online
photo album on t-zones.
• My Journal: allows you to send the voice note to your online
personal journal on t-zones.
3. Enter or select the destination for your voice note, and it will
appear in a To field.
To add another destination, select an empty To field and press the
Options soft key. Repeat from step 2.
Note: When entering multiple destinations, you can also choose Group,
Save to Drafts, Change recipient, and Back options in addition to the
other send options.
4. When you have finished entering the destinations, press the
Options soft key, highlight Send and press the Select soft key or
.
Section 11: Applications
133
t719.book Page 134 Thursday, June 29, 2006 1:44 PM
Using the Calendar
With the Calendar feature, you can view the calendar by month, week, or day
and create appointments.
Accessing the Calendar
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Calendar and press the Select soft key or
.
.
When you select the Calendar menu, the month view will appear showing
the current month.
At the bottom of the calendar, the scheduled items icon
along with the number of entries for the selected day.
is displayed
Press the Options soft key to access the following options:
• View mode: allows you to select between Day view or Week view
of the selected day.
• Create appointment: allows you to create an appointment.
• Go to: allows you to see the Month view with today’s date
highlighted or a specified date.
Changing the View Mode
1. From the calendar, press the Options soft key.
2. Highlight the View mode option and press the Select soft key or
.
134
t719.book Page 135 Thursday, June 29, 2006 1:44 PM
Using the Calendar
3. Highlight a view mode and press the Select soft key or
.
Depending on which calendar view you are in, the options for the
other two views will be displayed. For example, if you are presently
in Month view, the available options will be Day view or Week
view.
Creating an Appointment
This option allows you to create an appointment.
1. From Month, Week, or Day View, press the Options soft key.
2. Highlight the Create appointment option and press the Select
soft key or
.
3. Enter the subject in the Subject text box and press the Down
Navigation key.
For more information about entering characters, see "Section 5:
How to Enter Text" on page 43.
4. Enter details of the appointment and press the Down Navigation
key.
5. The Show time as box will be highlighted. Use the Left or Right
Navigation key to select one of Busy, Out of Office, Free, or
Tentative.
6. Press the Down Navigation key and select the All day option using
if you want to mark the whole day as busy.
7. Press the Down Navigation key to highlight the Start date and
Start time options and enter the starting date and time.
8. Press the Down Navigation key and select AM or PM by using the
Left or Right Navigation key.
Section 11: Applications
135
t719.book Page 136 Thursday, June 29, 2006 1:44 PM
9. Press the Down Navigation key to highlight the End date and End
time options and enter the ending date and time.
10. Press the Down Navigation key and select AM or PM by using the
Left or Right Navigation key.
11. Press the Down Navigation key to highlight Location and enter the
appointment location.
12. Press the Down Navigation key and select Alarm by pressing
.
Set how long before the appointment the alarm is to alert you in
the Before box and the time unit.
13. Press the Down Navigation key and select Alarm tone by pressing
.
14. Select an alarm tone and press the Down Navigation key.
15. The Timezone box will be highlighted. Use the Left or Right
Navigation key to select your time zone.
16. Press the Down Navigation key and select Recurrence by pressing
. Set the following recurrence options:
• Recurrence pattern: allows you to set a recurrence pattern.
• Every: allows you to set how often you are alerted to an
appointment. For example, when you have set the recurrence
pattern to Weekly and set the Every option to “3,” you will be
alerted to the appointment every 3 weeks until the ending
date.
• Until date: allows you to set the ending date for the recurring
appointment.
• Relative week day: (only for Weekly) allows you to select the
days of the week on which the appointment recurs.
136
t719.book Page 137 Thursday, June 29, 2006 1:44 PM
Using the Calendar
• Relative day: (only for Monthly or Yearly) If this option is
selected, the starting date is fixed for the relative day and you
will be alerted to an appointment on the fixed day every
month or every year. For example, when you have scheduled
an appointment on the 27th March 2006, or the third
wednesday of March, and set the recurrence pattern to Yearly,
you will be alerted to the appointment on the third wednesday
of March next year.
17. When you are finished, press the Options soft key. Highlight Save
and press the Select soft key or
. Your appointment is saved.
Creating meeting requests
You can use Calendar to set up meetings with users of Outlook or Pocket
Outlook. The meeting request will be sent automatically either when you
synchronize Inbox or when you connect to your BlackBerry email server.
1. From Month, Week, or Day View, press the Options soft key.
2. Highlight the Create appointment option and press the Select
soft key or
.
3. Press the Options soft key and press the Select soft key or
4. Highlight Add invitee and press the Select soft key or
.
.
5. Repeat from step 3 in "Creating an Appointment" on page 135 to
schedule a meeting.
6. When you have finished, press the Send soft key.
Section 11: Applications
137
t719.book Page 138 Thursday, June 29, 2006 1:44 PM
Editing an Appointment
After you have created an appointment, you can make changes to it.
1. Go to the Day view of an appointment you would like to edit.
2. Highlight the appointment and press
. Details of the
appointment will appear in the View mode.
3. Press the Options soft key, highlight Edit and press the Select soft
key or
.
4. Using the Up or Down Navigation key, select and edit the fields
you want.
5. When you are finished, press the Options soft key and select the
Save option.
Deleting an Appointment
After you have created an appointment, you can delete it.
1. Go to the Day view of an appointment you would like to delete.
2. Highlight the appointment and press
. Details of the
appointment will appear in the View mode.
3. Press the Options soft key, highlight Delete and press the Select
soft key or
.
4. At the Delete? prompt, press the Yes soft key to delete the
appointment, or press the No soft key to cancel.
138
t719.book Page 139 Thursday, June 29, 2006 1:44 PM
Using Alarm
Using Alarm
The Alarm application allows you to:
• set up to three alarms to sound at specified times.
• set the phone to switch on automatically and sound the alarm even
if the phone is switched off.
The following options are available:
• Wake up call: the alarm sounds to wake you up in the morning.
• Alarm1/Alarm 2: the alarm sounds at the specified time and date.
You can set the day, time, and tone for this alarm.
• Auto power: alarms sound at the specified time even if the phone
is turned off. If the option is set to Off and the phone is switched
off at the specified time, the alarm does not sound.
Setting an Alarm
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Alarm and press the Select soft key or
.
.
4. Highlight the type of alarm and press the Select soft key or
.
5. Highlight the Alarm option and press the Left or Right Navigation
key to set to On.
6. Press the Down Navigation key to highlight the Alarm time option.
Enter the time for the alarm to sound.
Note: Your phone is preset to a 12-hour format. To change the time format,
see "Time & Date Settings" on page 84.
Section 11: Applications
139
t719.book Page 140 Thursday, June 29, 2006 1:44 PM
7. Press the Down Navigation key to highlight AM/PM. Press the Left
or Right Navigation key to set to AM or PM.
8. Press the Down Navigation key to highlight Repeat. Press the Left
or Right Navigation key to select a repeat option.
9. Press the Down key to highlight Alarm tone. Press
a list of alarm tone locations.
to bring up
10. Press the Up or Down Navigation key to highlight My sounds or
Default sounds. Press the Select soft key or
.
11. Press the Up or Down Navigation key to select an alarm tone.
Press the Select soft key or
.
12. Press the Save soft key.
Stopping an Alarm
When the time for an alarm comes and the alarm sounds:
• To stop an alarm when it rings, press any key.
For a wake-up alarm, press the Confirm soft key or
.
Press the Snooze soft key or any key, except the Confirm soft key
and
, to cause it to sound again after 5 minutes. You can do this
a maximum of 5 times.
• To deactivate an alarm setting, access it from the Alarm list and
select Off in the Alarm option.
140
t719.book Page 141 Thursday, June 29, 2006 1:44 PM
Using File Manager
Using File Manager
The File manager menu allows you to manage your sounds, images, videos,
and other files in one convenient location.
To access File manager:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
.
3. Highlight File manager and press the Select soft key or
4. Highlight a file type and press the Select soft key or
.
.
5. Highlight a folder or download option and press the Select soft key
or
.
Sounds
The Sounds menu stores sounds you have recorded, downloaded from the
web server, or received in messages. You can set a downloaded sound as the
current ringtone.
The following options are available:
Get more MegaTones
Using the Get more MegaTones option on the sounds list, you can access
the website preset by T-Mobile and download new MegaTones.
Get more HiFi Ringers
Using the Get more HiFi Ringers option on the sounds list, you can access
the website preset by T-Mobile and download new HiFi Ringers.
Section 11: Applications
141
t719.book Page 142 Thursday, June 29, 2006 1:44 PM
My sounds
Highlight an item in the My sounds menu and press the Options soft key.
The following options are available:
• Download new: takes you to t-zones where you can download
new sounds.
• Play: plays back the sound.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Set as: allows you to set the sound as your ringtone, a caller
ringtone, or an alarm tone.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to lock the sound to protect it from being
deleted.
• Properties: displays the sound name, date, format, size, and
protection.
Voice list
The Voice list stores voice notes you have recorded. Highlight an item in the
Voice list menu and press the Options soft key. The following options are
available:
• Play: plays back the voice note.
• Send via: allows you to send the file via Picture message or
Bluetooth.
142
t719.book Page 143 Thursday, June 29, 2006 1:44 PM
Using File Manager
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to lock the file to protect it from being
deleted.
• Properties: displays the file name, date, format, length, size, and
protection status.
Images
The Images menu stores images you have taken, downloaded from the web
server, or received in messages. You can set a downloaded image as your
wallpaper.
The following options are available:
Get more wallpapers
Using the Get more wallpapers option, you can access the website preset
by T-Mobile and download new wallpapers.
My Album
This folder provides the ability for you to view the photos you have stored in
your online photo album on t-zones. Use the following procedures to access
My Album.
1. In your t-zones browser, select the My Albums Menu link and
press the Select soft key or
.
2. Photos sent to this folder are stored in the Inbox Album. Press the
Select soft key to view the photos.
3. Press the
key to exit t-zones and return to the idle screen.
Section 11: Applications
143
t719.book Page 144 Thursday, June 29, 2006 1:44 PM
My Journal
This folder provides the ability for you to store your photos in your online
personal journal on t-zones.
My downloads
This folder allows you to access your downloaded images.
Highlight an image and press the Options soft key. The following options are
available:
• Download new: takes you to t-zones where you can download
new images.
• View: displays the image.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Set as: allows you to set the image as a caller ID or as your
wallpaper.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Display mode: allows you to display your images in Line view or in
Thumbnail view.
• Slide show: allows you to see all files in a slide show
presentation.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to lock the file to protect it from being
deleted.
144
t719.book Page 145 Thursday, June 29, 2006 1:44 PM
Using File Manager
• Properties: displays the file name, date, format, size, resolution,
and protection status.
My photos
In this folder, you can review photos you have taken. Highlight a photo and
press the Options soft key to access the following options:
• View: displays the photo.
• Send to My Album: allows you to send the photo to My Album.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Default destination: allows you to remove or replace the default
destination.
• Set as: allows you to set the image as a caller ID or as your
wallpaper.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Display mode: allows you to display your images in Line view or in
Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to lock the file to protect it from being
deleted.
• Properties: displays the file name, date, format, size, resolution,
quality, and protection status.
Section 11: Applications
145
t719.book Page 146 Thursday, June 29, 2006 1:44 PM
Videos
The Videos menu stores videos you have recorded, downloaded from the
web server, or received in messages. The following options are available:
Downloaded videos
This folder allows you to access your downloaded video clips.
Highlight a video and press the Options soft key. The following options are
available:
• Play: plays the video clip.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Display mode: allows you to display your videos in a Line view or
in Thumbnail view.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to lock the file to protect it from being
deleted.
• Properties: displays the file name, date, format, size, and
protection status.
146
t719.book Page 147 Thursday, June 29, 2006 1:44 PM
Using File Manager
My videos
In this folder, you can review videos you have recorded.
Highlight a video and press the Options soft key to access the following
options:
• Play: plays back the video clip.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Display mode: allows you to display your videos in Line view or in
Thumbnail view.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to lock the file to protect it from being
deleted.
• Properties: displays the file name, date, format, size, resolution,
quality, and protection status.
Other files
This menu allows you to view other types of files that you have stored on your
phone. This includes Excel spreadsheets, text files, WMF files, PowerPoint
presentations, PDFs, MHTML, and Word documents. You can send these
files by picture message or Bluetooth.
Section 11: Applications
147
t719.book Page 148 Thursday, June 29, 2006 1:44 PM
Memory status
You can check the amount of memory in use and memory remaining for
sounds, images, videos, and other files. Select an option and press the Left
or Right Navigation key to toggle between size and count.
Using Calculator
With this feature, you can use the phone as a calculator. The calculator
provides the basic arithmetic functions; addition, subtraction,
multiplication, and division.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Calculator and press the Select soft key or
.
.
4. Enter the first number using the number keys.
5. Enter the operation for your calculation by pressing the Navigation
keys:
• Left: subtraction (-)
• Right: addition (+)
• Up: multiplication (x)
• Down: division (÷)
6. If necessary, press the Left soft key to insert a decimal point or
brackets.
7. Enter the second number.
8. Press
to view the result.
9. Repeat from step 5 to continue the calculation.
148
t719.book Page 149 Thursday, June 29, 2006 1:44 PM
Playing Games
Playing Games
You can download MIDlets (Java applications that run on mobile phones)
from various sources using t-zones and store them in your phone.
Note: Java services may not be available, depending on your service provider.
Playing a Game
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Games and press the Select soft key or
.
.
4. Highlight My games and press
.
The list of the embedded games appears. Once you have
downloaded games, they are added to the My games list.
5. Scroll to the MIDlet you want and press
. The startup screen of
the MIDlet will be displayed along with game options.
6. Press
or any key to access the option list, if necessary.
7. Use the Navigation keys to scroll between options. Press
make a selection.
to
Note: MIDlet game options will differ depending on the MIDlet you select.
Downloading a Game
To download more games from the website preset by T-Mobile, highlight Get
more games from the Games list and press
. After connecting to the
game website, download games by following the instructions on the screen.
Section 11: Applications
149
t719.book Page 150 Thursday, June 29, 2006 1:44 PM
Using Voice Recognition
VoiceSignal is an advanced speech recognition software that can be used to
activate a wide-variety of functions on your phone. VoiceSignal software
automatically voice activates all contacts for voice dialing and searching, no
pre-recording or training needed. Speak phone numbers naturally to dial, and
use voice commands to launch applications and navigate phone menus.
VoiceSignal Options
The following is a list of functions that you can perform using VoiceSignal
speech recognition on your phone.
• Call <Name or #>: dials by saying either a name or a number in
the Contacts list.
• Send text <Name>: sends a text message to a number or to
someone in your Contacts List.
• Lookup <Name>: opens the contact record for any name in the
Contacts list.
• Go to <App>: opens any application installed on your device.
• Check <Item>: provides the details of your network coverage,
signal strength, and battery power level.
Digit Dialing
Digit Dial allows you to dial any phone number by simply speaking the digits
into the phone. No training is necessary, and Digit Dial is programmed to
understand natural speech.
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
150
t719.book Page 151 Thursday, June 29, 2006 1:44 PM
Using Voice Recognition
2. After a brief pause, a list of optional commands appears on the
display and the audio prompt “Say a command” plays through the
earpiece.
3. Say “Call” and the area code and number that you want to dial at a
distance of 3-12 inches from the phone in a natural voice.
4. If VoiceSignal is not sure of the number that you said, a list of
possible matches appears on the display. You are asked to confirm
the correct number as VoiceSignal displays the results. Say “Yes”
or “No” to confirm or reject the number when prompted.
The number that you said is repeated through the earpiece then
your phone will dial the number.
Name Dialing
To use Name Dial, you’ll need to have entries stored in your Phonebook. See
‘Section 6: Phonebook” on page 49 for information on creating Phonebook
entries.
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
2. After a brief pause, a list of optional commands appears on the
display and the audio prompt “Say a command” plays through the
earpiece.
3. Say “Call” and the name of the contact that you want to dial.
The name that you said is repeated through the earpiece and your
phone dials the number.
Section 11: Applications
151
t719.book Page 152 Thursday, June 29, 2006 1:44 PM
4. If VoiceSignal is not sure of the name that you said, a list of
possible matches appears on the display. You are asked to confirm
the correct number as VoiceSignal displays the results. Say “Yes”
or “No” to confirm or reject the number when prompted.
The number that you said is repeated through the earpiece then
your phone will dial the number.
Sending a Text Message
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
2. A list of commands appears on the display and the audio prompt
“Say a command” plays through the earpiece.
3. Say “Send Text” at a distance of 3-12 inches from the microphone.
“Say the Name or Number” plays through the earpiece.
4. After you say a name or number, you might be prompted, “Did you
say?” To confirm a name or number, wait for the beep and then say
“Yes.”
You can also choose the correct name or number from the choice
list using the Navigation keys.
5. When a new text message screen is launched, compose and send a
text message. For further information, see "Composing and Sending
a Text Message" on page 63.
Looking Up a Name
To perform a name lookup, you’ll need to have some entries in the Contacts
list.
152
t719.book Page 153 Thursday, June 29, 2006 1:44 PM
Using Voice Recognition
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
2. A list of commands appears on the display and the audio prompt
“Say a command” plays through the earpiece.
3. Say “Lookup” at a distance of 3-12 inches from the microphone.
“Say the name” plays through the earpiece.
4. Say the name exactly as it is displayed in your Contacts list, first
name followed by last name.
The contact name appears on the display with other information
that you’ve entered for that contact.
Opening Applications
You can open an application or access a menu on your phone using
VoiceSignal.
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
2. A list of commands appears on the display and the audio prompt
“Say a command” plays through the earpiece.
3. Say “Go To” at a distance of 3-12 inches from the microphone. A
list of options appears and the audio prompt “Please choose” plays
through the earpiece. If the option you desire is not listed, say
“Next Menu” to scroll to the next page.
The menu option spoken opens.
Section 11: Applications
153
t719.book Page 154 Thursday, June 29, 2006 1:44 PM
Checking Phone Status
Use the Check command to see and hear status information from your phone,
including its phone number, status, current signal strength, network
coverage, and battery level.
To check phone status:
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
2. A list of commands appears on the display and the audio prompt
“Say a command” plays through the earpiece.
3. Say “Check” at a distance of 3-12 inches from the microphone. A
list of options appears and the audio prompt “Please choose” plays
through the earpiece.
The phone status menu option spoken is displayed.
Viewing World time
You can find out the current time in another part of the world.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
.
.
4. Highlight World time and press the Select soft key or
.
5. Scroll through time zones by pressing the Left and Right
Navigation keys.
As the time line moves, the time and date of the given zone display.
154
t719.book Page 155 Thursday, June 29, 2006 1:44 PM
Using a Unit Conversion
6. Press the Options soft key to access the following options:
• Save: saves your world time settings.
• Set daylight saving time: use
to place a check mark
next to the cities that you want to set daylight saving time.
Each city listed represents a time zone.
Using a Unit Conversion
The Unit conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert any of the above categories, do the following:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
.
.
4. Highlight Unit conversion and press the Select soft key or
.
5. Scroll to the conversion feature you wish to use and press the
Select soft key or
. Then press the Down Navigation key.
6. Press the Left or Right Navigation key to select the original unit in
the From field.
Section 11: Applications
155
t719.book Page 156 Thursday, June 29, 2006 1:44 PM
7. Enter the quantity to be converted in the text box and press the
Down Navigation key.
Note: To include a decimal point, press
. To change the temperature to
above zero (+) or below zero (-) in the Temperature converter, press
8. Press the Left or Right Navigation key to select the unit to which
you want to convert.
The converted number will be displayed.
Note: For the currency converter, you can view and set currency rates by
pressing <Option>.
Using the Timer
You can set a timer to alert you when a specified period of time passes. Note
that running a timer drains the battery power faster.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
4. Highlight Timer and press the Select soft key or
.
.
.
5. Press the Set soft key and enter the length of time. Press the OK
soft key or
.
6. Press
to start the timer. You can use other functions, while the
timer is running in the background.
7. Press
156
or the Exit soft key to stop the timer when it rings.
t719.book Page 157 Thursday, June 29, 2006 1:44 PM
Using the Stopwatch
Using the Stopwatch
You can use a stopwatch to check the elapsed time.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
3. Highlight Utilities and press the Select soft key or
.
.
4. Highlight Stopwatch and press the Select soft key or
5. Press
to start the stopwatch.
6. Press
for the lap time. You can have up to 4 lap times.
.
7. Press the Reset soft key to erase all stopwatch times recorded.
Setting Up BlackBerry Email Service
There are two kinds of BlackBerry email services: BlackBerry Enterprise
Server and BlackBerry Internet Email Service. You can set up your email
accounts for BlackBerry.
Note: This menu may be labeled differently, depending on your network. For
example, Setup T-Mobile Prosumer BlackBerry Service.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Applications and press the Select soft key or
.
3. Highlight Setup BlackBerry Internet email account and press
the Select soft key or
.
4. Press the Setup soft key or
.
5. Follow the further screen instructions. These instructions may vary
depending on the type of services or operators you are using.
Section 11: Applications
157
t719.book Page 158 Thursday, June 29, 2006 1:44 PM
Accessing Get More Help
Get More Help is designed to show you some of the features of your phone
using t-zones. You can search help files on the fly while traveling, at home
or anywhere, using help.wap.t-mobile.com.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Get More Help and press the Select soft key or
.
3. You will enter t-zones and the Get More Help menu will be
displayed.
The following options are available:
• Browse Help Topics: this option gives you a list of different
topics that you can select.
• Enter a Search: this option allows you to enter a keyword to
search on.
• About: this option offers general information about Get More
Help including concept and site design, copyright information,
and contact email address.
158
t719.book Page 159 Thursday, June 29, 2006 1:44 PM
Section 12: Camera and Camcorder
Topics Covered
• Taking a Photo
• Recording a Video
• Accessing Photos or Videos
This section explains how to use the camera and camcorder on your phone.
You can take photos and record video clips using the built-in camera and
camcorder.
Using the camera-camcorder module in your phone, you can take photos or
record video clips of people or events while on the move. Additionally, you
can send photos and video clips to other people in a Picture message or set
them as a wallpaper or caller ID image.
Notes:
Do not take photos or record videos of people without their permission.
Do not take photos or record videos in places where cameras are not allowed.
Do not take photos or record videos in places where you may interfere with
another person’s privacy.
Taking a Photo
You can take a photo in various modes. Your camera produces photos in JPEG
format.
Note: When you take a photo in direct sunlight or in bright conditions, shadows
may appear on the photo.
Section 12: Camera and Camcorder
159
t719.book Page 160 Thursday, June 29, 2006 1:44 PM
1. In Idle mode, press the Up Navigation key to turn on the camera
and switch the phone to Camera mode.
You can also press the Menu soft key to access Menu mode,
highlight Camera, and press the Select soft key or
to enter the
menu. Highlight Take and send and press the Select soft key or
.
2. Make any desired adjustments.
• Press the Left soft key to access camera options. For details,
see “Using Camera Options” on page 161.
• You can also use the keypad to quickly change the camera
options. For details, see “Camera shortcuts” on page 162.
3. Press
or press and hold
Album? is displayed.
to take a photo. Send to My
4. Press the Yes soft key or
if you want to send the photo to My
Album, an online photo album provided by T-Mobile. The phone’s
default destination is set to My Album. The photo is automatically
saved in My photos in the phone.
Note: To change the default destination for your pictures, press the Options
soft key when Send to My Album? appears on the display. Highlight the
Default destination option and press the Select soft key or
. You can
then remove your default destination or change it to a phone number, email
address, Recent log, Phonebook, My Album, or My Journal.
To use the photo options, press the Options soft key.
160
To return to Capture mode, press
.
To return to Idle mode, press the
key.
t719.book Page 161 Thursday, June 29, 2006 1:44 PM
Taking a Photo
Using Camera Options
In Camera mode, you can use various options for the camera by pressing the
Left soft key.
The following options are available:
• Record video: switches from Camera mode to Camcorder mode.
• Shooting mode: allows you to take a photo in various modes.
Once you change the mode, the corresponding indicator appears at
the top left of the display. The following modes are available:
Single shot: allows you to take a photo in the normal mode. Select
whether or not the camera automatically saves a photo.
Multi shot: allows you to take a series of action stills. Select the
shooting speed and the number of photos the camera will take.
When you press
, the camera takes photos successively.
Mosaic shot: allows you to take several photos to combine in a
mosaic.Select the image layout and set whether or not the photos
will be taken automatically.
• Effects: allows you to change the color tone or apply special
effects to the photo.
• Frames: allows you to select a decorative frame. Select a frame
using the Navigation keys and press
to save your setting.
• Flash: allows you to set the flash option to Off, Shooting only, or
Permanent. To use the flash for taking photos, select Shooting
only. By setting the option to Permanent, you can use your phone
as a flashlight if needed.
• Timer: allows you to set a time delay before the camera takes the
photo. Select the length of delay you want. When you press
or
press and hold , the camera takes a photo after the specified
time has elapsed.
Section 12: Camera and Camcorder
161
t719.book Page 162 Thursday, June 29, 2006 1:44 PM
• Go to My photos: takes you to the My photos folder.
• Settings: allows you to change the camera settings.
Size: allows you to set the image size.
Viewfinder: allows you to set the viewfinder to Full screen view or
Standard ratio.
Shutter sound: allows you to select a tone for the shutter sound.
Choose between 4 tones.
Zoom sound: allows you to turn zoom sound on or off.
Brightness sound: allows you to turn brightness sound on or off.
Default name: allows you to change the default prefix assigned to
your photos.
• Camera shortcuts: shows you how to change options using your
keypad in Capture mode. The following shortcuts are available:
Right and Left Navigation keys zoom in and out.
Up and Down Navigation keys adjust the brightness.
Up Volume key flips the image vertically.
Down Volume key shows the mirror image.
switches between Camera mode and Camcorder mode.
changes the image size.
changes the camera shot mode.
changes the color tone or applies a special effect to a photo.
selects a decorative frame.
sets a time delay.
162
t719.book Page 163 Thursday, June 29, 2006 1:44 PM
Recording a Video
takes you to the My photos folder.
changes the preview screen.
determines the use of the flash.
Recording a Video
Your camcorder produces videos in 3GP format.
1. In Idle mode, press the Up Navigation key to turn on the camera
and press
to switch to Camcorder mode.
You can also press the Menu soft key to access Menu mode,
highlight Camera, and press the Select soft key or to enter the
menu. Highlight Record video and press the Select soft key or
.
2. Make any desired adjustments.
• Press the Left soft key to access camcorder options. For
details, see “Using Camcorder Options” on page 164.
• You can also use the keypad to quickly change the camcorder
options. For details, see “Camcorder shortcuts” on page 165.
3. Press
or press and hold
to start recording.
4. When you have finished, press
, the Right soft key, or to stop
recording. The video clip is automatically saved in the My videos
folder.
5. To play back the video, press
.
To access video options, press the Options soft key.
To return to Camcorder mode, press
To return to Idle mode, press the
or the Preview soft key.
key.
Section 12: Camera and Camcorder
163
t719.book Page 164 Thursday, June 29, 2006 1:44 PM
Using Camcorder Options
In Camcorder mode, you can use various options for the camcorder by
pressing the Left soft key.
The following options are available:
• Take picture: switches from Camcorder mode to Camera mode.
• Effects: allows you to change the color tone or apply special
effects.
• Flash: allows you to set the flash option to Off, Shooting only, or
Permanent. To use the flash for recording videos, select Shooting
only. By setting the option to Permanent, you can use your phone
as a flashlight if needed.
• Timer: allows you to set a time delay before the camcorder records
the video clip. Select the length of delay you want. When you press
, or press and hold , the camcorder records the video after
the specified time has elapsed.
• Go to My videos: takes you to the My videos folder.
• Settings: allows you to change the recording settings.
Recording mode: allows you to change the recording mode. The
maximum recording time is determined by this setting. Select Limit
for message to record a video for sending it in a message.
Size: allows you to set the image size to either QCIF(176x144), or
Sub-QCIF(128x96). The selected image size displays on the capture
screen.
Viewfinder: allows you to set the viewfinder to Full screen view or
Standard ratio.
164
t719.book Page 165 Thursday, June 29, 2006 1:44 PM
Recording a Video
Audio record: allows you to be able to record audio with your
video. Set to On or Off.
Default name: allows you to change the default prefix assigned to
your videos.
• Camcorder shortcuts: shows you how to change options using
your keypad in Capture mode. The following shortcuts are
available:
Right and Left Navigation keys zoom in and out.
Up and Down Navigation keys adjust the image brightness.
Up volume key flips the image vertically.
Down volume key shows a mirror image.
switches between Camera mode and Camcorder mode.
changes the image size.
changes the recording mode.
changes the color tone or applies a special effect.
turns audio on or off.
sets a time delay.
takes you to the My videos folder.
changes the preview screen.
determines the use of the flash.
Section 12: Camera and Camcorder
165
t719.book Page 166 Thursday, June 29, 2006 1:44 PM
Accessing Photos or Videos
Your phone provides you with the following folders for storing your photos
and videos, where you can access and manage the photos and videos.
My Photos
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Camera. Press the Select soft
key or
to enter the menu.
3. Highlight My photos and press the Select soft key or
.
When you access this menu, your phone displays the photos in
Thumbnail mode, which shows them as small images. Use the Up
or Down Navigation key to scroll through the photos.
4. To view the photos on a full screen, press
. To go back to
Thumbnail mode, press the Back soft key or
.
5. Press the Left and Right Navigation keys to scroll through your
photos.
Using My Photos Options
From the My photos folder, press the Options soft key to access the
following options:
• View: displays the photo.
• Send to My Album: allows you to send the file to My Album, an
online photo album on t-zones.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Default destination: allows you to remove or replace the default
destination.
166
t719.book Page 167 Thursday, June 29, 2006 1:44 PM
Accessing Photos or Videos
• Set as: allows you to set the photo as your wallpaper or as a caller
ID.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Display mode: allows you to display your photos in Line view or in
Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to protect the file from being deleted.
• Properties: shows the properties of the photo, such as the file
name, file date, file format, file size, image resolution, image
quality, and protection status.
Deleting a Photo
You can delete photos one by one or all at once.
1. From the My photos folder, select the photo you want to delete
and press the Options soft key.
2. Highlight Delete and press the Select soft key or
3. Highlight Selected and press the Select soft key or
.
.
Highlight Multiple to delete multiple photos and press the Select
soft key or .
4. Press the Yes soft key to confirm the deletion.
Section 12: Camera and Camcorder
167
t719.book Page 168 Thursday, June 29, 2006 1:44 PM
My Videos
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Camera. Press the Select soft
key or
to enter the menu.
3. Highlight My videos and press the Select soft key or
.
When you access this menu, your phone displays the video clips in
Thumbnail mode, which shows them as small images. Use the Up
or Down Navigation key to scroll through the video clips.
4. To view the video clips, press
.
Using My Videos Options
From the My videos folder, press the Options soft key to access the
following options:
• Play: plays back the video.
• Send via: allows you to send the file via Picture message or
Bluetooth.
• Delete: allows you to delete the selected file or multiple files.
• Rename: allows you to change the file name.
• Display mode: allows you to display your videos in Line view or in
Thumbnail view.
• Share for Bluetooth: allows the selected file or the files you want
to be shared or released for the use of another Bluetooth device.
• Protection: allows you to protect the file from being deleted.
• Properties: shows the properties of the file, such as the file name,
file date, file format, file size, image resolution, image quality, and
protection status.
168
t719.book Page 169 Thursday, June 29, 2006 1:44 PM
Accessing Photos or Videos
Deleting a Video Clip
You can delete video clips one by one or all at one time.
1. From the My videos menu, highlight the video you want to delete
and press the Options soft key.
2. Highlight Delete and press the Select soft key or
3. Highlight Selected and press the Select soft key or
.
.
Highlight Multiple to delete multiple videos and press the Select
soft key or
.
4. Press the Yes soft key to confirm the deletion.
My Album
This menu provides the ability for you to view the photos you have stored on
your online photo album on t-zones.
My Journal
This menu provides the ability for you to view the photos you have stored on
your online personal journal on t-zones.
Section 12: Camera and Camcorder
169
t719.book Page 170 Thursday, June 29, 2006 1:44 PM
170
t719.book Page 171 Thursday, June 29, 2006 1:44 PM
Section 13: t-zones
Topics Covered
• Accessing the Homepage of t-zones
• Using Favorites
• Accessing a Website by Entering a URL address
• Clearing the Cache
This section outlines the t-zones service, a web-based service provided by
T-Mobile. For more information about the service, contact T-Mobile.
You can access t-zones by using a WAP (Wireless Application Protocol)
browser equipped on your phone to allow you to access and navigate the
wireless web.
Accessing the Homepage of t-zones
To access t-zones, proceed with the following:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, highlight t-zones. Press the Select soft
key or
to enter the menu.
Section 13: t-zones
171
t719.book Page 172 Thursday, June 29, 2006 1:44 PM
3. Highlight Home and press the Select soft key or
.
Note: You can access t-zones without going through the t-zones menu by
simply pressing
while in Idle mode.
The phone launches the web browser, connects to the network and
loads the homepage of t-zones.
The content of the t-zones startup homepage depends on your
Wireless Web service provider. To scroll through the screen, use
the Up and Down Navigation keys.
To go to the startup homepage from any other screen in the t-zones,
use the Home option. For more information on the t-zones menus,
see "Selecting and Using Menu Options" on page 173.
Exiting the t-zones
To exit the browser at any time, simply press the
key.
Navigating the t-zones
• To scroll through browser items, press the Up or Down Navigation
key.
• To select browser items, press
. You can also press the Options
soft key, highlight Select, and press the OK soft key.
• To return to the previous page, press
. You can also press the
Options soft key, highlight Back, and press the OK soft key.
• To return to the startup homepage, press the Menu soft key.
Highlight Home and press the Select soft key.
172
t719.book Page 173 Thursday, June 29, 2006 1:44 PM
Accessing the Homepage of t-zones
Entering Text in t-zones
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. The following modes are available:
• Upper-case character mode (A): allows you to enter upper-case
English characters.
• Lower-case character mode (a): allows you to enter lower-case
English characters.
Note: You can switch between upper-case or lower-case character mode by
pressing
.
• Number mode (1): allows you to enter numbers.
Note: To enter numbers, press
, and then the desired number key.
• Symbol mode: allows you to enter symbols.
Note: To enter symbols, press
and then
.
Selecting and Using Menu Options
Various menus are available when you are navigating the wireless web.
To access the browser options menu, press the Menu soft key.
Note: The menu options may vary, depending on your version of t-zones.
The following options are available:
• Favorites: shows the bookmark lists. You can bookmark the current
web page or access previously bookmarked pages.
Section 13: t-zones
173
t719.book Page 174 Thursday, June 29, 2006 1:44 PM
• Reload: reloads the current page.
• Home: takes you back at any time to the homepage of the Wireless
Web service provider.
• Go to URL: allows you to manually enter a URL address of a web
page. After entering an address, press
to access directly.
• Show URL: displays the URL address of the web page to which you
are currently connected. It also enables you to set the current site
as a startup homepage.
• Clear cache: allows you to clear information stored in the phone’s
temporary memory which stores the most recently accessed web
pages.
• Inbox: takes you to your message Inbox.
• Show images: allows you to view images on the web page.
• Certificates: allows you to view Internet certificates.
• Text Message: allows you to create a text message.
Using Favorites
This menu stores up to 15 URL addresses in order to quickly access the
corresponding websites.
To store a URL address:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, highlight t-zones. Press the Select soft
key or
to enter the menu.
3. Highlight Favorites and press the Select soft key or
174
.
t719.book Page 175 Thursday, June 29, 2006 1:44 PM
Accessing a Website by Entering a URL address
4. Scroll to an empty location and press the Select soft key or
.
5. Enter a name for the favorite item in the name text box and press
the Down Navigation key.
6. Enter the address in the URL text box and press the Save soft key.
Note: For further details about how to enter characters, see "Section 5: How to
Enter Text" on page 43.
After saving a favorite item, press the Options soft key to access the
following options:
• Go to URL: takes you to the bookmarked web page.
• Edit: allows you to edit the name and address of the bookmark.
• Delete: allows you to delete the selected bookmark or all
bookmarks.
Otherwise, you can directly access a website by selecting a favorite item
from the list.
Accessing a Website by Entering a URL address
You can manually enter the URL address of a website that you want to
access.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight t-zones and press the Select soft key or
3. Highlight Go to URL and press the Select soft key or
.
.
4. Enter the URL address you want and press the Enter soft key to
access the corresponding website.
Section 13: t-zones
175
t719.book Page 176 Thursday, June 29, 2006 1:44 PM
Clearing the Cache
You can clear information stored in the cache. The cache is a temporary
memory site that stores recently accessed web pages.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight t-zones and press the Select soft key or
.
3. Highlight Clear cache and press the Select soft key or
.
4. At the Clear cache? prompt, press the Yes soft key to confirm the
deletion. Otherwise, press the No soft key.
176
t719.book Page 177 Thursday, June 29, 2006 1:44 PM
Section 14: Health and Safety Information
Topics Covered
• Exposure to Radio Frequency (RF) Signals
• Consumer Information on Wireless Phones
• Road Safety
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your
phone. These safety precautions should be followed to safely use your
phone.
Section 14: Health and Safety Information
177
t719.book Page 178 Thursday, June 29, 2006 1:44 PM
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF)
energy set by the Federal Communications Commission (FCC) of the U.S.
government. These FCC exposure limits are derived from the
recommendations of two expert organizations, the National Counsel on
Radiation Protection and Measurement (NCRP) and the Institute of Electrical
and Electronics Engineers (IEEE). In both cases, the recommendations were
developed by scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate (SAR). The SAR is
a measure of the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/kg). The FCC requires wireless
phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any variations in
measurements.
SAR tests are conducted using standard operating positions accepted by the
FCC with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station
antenna, the lower the power output.
178
t719.book Page 179 Thursday, June 29, 2006 1:44 PM
Exposure to Radio Frequency (RF) Signals
Before a new model phone is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the exposure limit established
by the FCC. Tests for each model phone are performed in positions and
locations (e.g. at the ear and worn on the body) as required by the FCC. For
body worn operation, this phone has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no metal and that
positions the handset a minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with
all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the
FCC are:
• Head: 1.44 W/Kg.
• Body-worn: 1.44 W/Kg.
SAR information on this and other model phones can be viewed on-line at
www.fcc.gov/oet/fccid. To find information that pertains to a particular
model phone, this site uses the phone FCC ID number which is usually printed
somewhere on the case of the phone. Sometimes it may be necessary to
remove the battery pack to find the number. Once you have the FCC ID number
(A3LSGHT719) for a particular phone, follow the instructions on the website
and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Section 14: Health and Safety Information
179
t719.book Page 180 Thursday, June 29, 2006 1:44 PM
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of
Questions and Answers for consumers relating to radio frequency (RF)
exposure from wireless phones. The FDA publication includes the following
information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with
built-in antennas, often called "cell," "mobile," or "PCS" phones. These types
of wireless phones can expose the user to measurable radio frequency
energy (RF) because of the short distance between the phone and the user's
head. These RF exposures are limited by Federal Communications
Commission safety guidelines that were developed with the advice of FDA
and other federal health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with increasing distance
from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower
power levels, and thus produce RF exposures well within the FCC's
compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while being used. They
also emit very low levels of RF when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue), exposure to low
180
t719.book Page 181 Thursday, June 29, 2006 1:44 PM
Consumer Information on Wireless Phones
level RF that does not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures have not found any
biological effects. Some studies have suggested that some biological
effects may occur, but such findings have not been confirmed by additional
research. In some cases, other researchers have had difficulty in reproducing
those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it
does with new drugs or medical devices. However, the agency has authority
to take action if wireless phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the health hazard
and to repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions,
FDA has urged the wireless phone industry to take a number of steps,
including the following:
• Support needed research into possible biological effects of RF of
the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use on
human health.
Section 14: Health and Safety Information
181
t719.book Page 182 Thursday, June 29, 2006 1:44 PM
FDA belongs to an interagency working group of the federal agencies that
have responsibility for different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies belong to this working
group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working
group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United
States must comply with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety questions about wireless
phones.
FCC also regulates the base stations that the wireless phone networks rely
upon. While these base stations operate at higher power than do the
wireless phones themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than those they can get
from wireless phones. Base stations are thus not the primary subject of the
safety questions discussed in this document.
182
t719.book Page 183 Thursday, June 29, 2006 1:44 PM
Consumer Information on Wireless Phones
What are the results of the research done already?
The research done thus far has produced conflicting results, and many
studies have suffered from flaws in their research methods. Animal
experiments investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded conflicting results
that often cannot be repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of the studies
that showed increased tumor development used animals that had been
genetically engineered or treated with cancer-causing chemicals so as to be
pre-disposed to develop cancer in absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless phones, so we
don't know with certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published since December
2000. Between them, the studies investigated any possible association
between the use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies demonstrated the existence
of any harmful health effects from wireless phones RF exposures. However,
none of the studies can answer questions about long-term exposures, since
the average period of phone use in these studies was around three years.
Section 14: Health and Safety Information
183
t719.book Page 184 Thursday, June 29, 2006 1:44 PM
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people
actually using wireless phones would provide some of the data that are
needed. Lifetime animal exposure studies could be completed in a few years.
However, very large numbers of animals would be needed to provide reliable
proof of a cancer promoting effect if one exists. Epidemiological studies can
provide data that is directly applicable to human populations, but ten or more
years' follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the time of
exposure to a cancer-causing agent and the time tumors develop - if they do
- may be many, many years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF exposure during day-to-day
use of wireless phones. Many factors affect this measurement, such as the
angle at which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups
of investigators around the world to ensure that high priority animal studies
are conducted to address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization
international Electromagnetic Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a
detailed agenda of research needs that has driven the establishment of new
research programs around the world. The Project has also helped develop a
series of public information documents on EMF issues.
184
t719.book Page 185 Thursday, June 29, 2006 1:44 PM
Consumer Information on Wireless Phones
FDA and Cellular Telecommunications & Internet Association (CTIA) have a
formal Cooperative Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the scientific oversight,
obtaining input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both laboratory
studies and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the latest
research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that
there is - it is probably very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a key factor in how
much exposure a person receives, reducing the amount of time spent using
a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body and
the source of the RF, since the exposure level drops off dramatically
with distance. For example, you could use a headset and carry the
wireless phone away from your body or use a wireless phone
connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these products,
you can use measures like those described above to reduce your RF exposure
from wireless phone use.
Section 14: Health and Safety Information
185
t719.book Page 186 Thursday, June 29, 2006 1:44 PM
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measures described above would apply
to children and teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance between the user and the RF
source will reduce RF exposure.
Some groups sponsored by other national governments have advised that
children be discouraged from using wireless phones at all. For example, the
government in the United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no evidence exists that
using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks.
Hands-free kits can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF energy in the head
because the phone, which is the source of the RF emissions, will not be
placed against the head. On the other hand, if the phone is mounted against
the waist or other part of the body during use, then that part of the body will
absorb more RF energy. Wireless phones marketed in the U.S. are required
to meet safety requirements regardless of whether they are used against the
head or against the body. Either configuration should result in compliance
with the safety limit.
186
t719.book Page 187 Thursday, June 29, 2006 1:44 PM
Consumer Information on Wireless Phones
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the
head from those emissions reduce risks. Some products that claim to shield
the user from RF absorption use special phone cases, while others involve
nothing more than a metallic accessory attached to the phone. Studies have
shown that these products generally do not work as advertised. Unlike
"hands-free" kits, these so-called "shields" may interfere with proper
operation of the phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In February 2002, the
Federal trade Commission (FTC) charged two companies that sold devices
that claimed to protect wireless phone users from radiation with making
false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact with some
electronic devices. For this reason, FDA helped develop a detailed test
method to measure electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This test method is
now part of a standard sponsored by the Association for the Advancement
of Medical instrumentation (AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other groups, was completed in
late 2000. This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI. FDA has
tested wireless phones and helped develop a voluntary standard sponsored
by the Institute of Electrical and Electronic Engineers (IEEE). This standard
Section 14: Health and Safety Information
187
t719.book Page 188 Thursday, June 29, 2006 1:44 PM
specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a
compatible phone and a compatible hearing aid at the same time. This
standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference be
found to occur, FDA will conduct testing to assess the interference and work
to resolve the problem.
Additional information on the safety of RF exposures from various sources
can be obtained from the following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
188
t719.book Page 189 Thursday, June 29, 2006 1:44 PM
Road Safety
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice,
almost anywhere, anytime. But an important responsibility accompanies the
benefits of wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your
wireless phone behind the wheel of a car, practice good common sense and
remember the following tips:
1. Get to know your wireless phone and its features, such as speed
dial and redial. If available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If possible, add an
additional layer of convenience and safety to your wireless phone
with one of the many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access
your wireless phone without removing your eyes from the road. If
you get an incoming call at an inconvenient time, let your voice mail
answer it for you.
4. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice and even heavy traffic can be
hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting
down a "to do" list or flipping through your address book takes
attention away from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your mirrors,
then continue.
Section 14: Health and Safety Information
189
t719.book Page 190 Thursday, June 29, 2006 1:44 PM
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving
and suspend conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see
an auto accident, crime in progress or other serious emergency
where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special nonemergency number.
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com
Provided by the Cellular Telecommunications & Internet Association.
190
t719.book Page 191 Thursday, June 29, 2006 1:44 PM
Operating Environment
Operating Environment
Remember to follow any special regulations in force in any area and always
switch your phone off whenever it is forbidden to use it, or when it may cause
interference or danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that
for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the equipment should
only be used in the normal operating position (held to your ear with the
antenna pointing over your shoulder if you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the manufacturer to discuss
alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of 15 cm (6
inches) be maintained between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the independent research and
recommendations of Wireless Technology Research.
Section 14: Health and Safety Information
191
t719.book Page 192 Thursday, June 29, 2006 1:44 PM
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize potential
interference.
If you have any reason to suspect that interference is taking place, switch
your phone off immediately.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of
your device to determine if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information. Switch
your phone off in health care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do
so.
192
t719.book Page 193 Thursday, June 29, 2006 1:44 PM
Potentially Explosive Environments
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service
station). Users are reminded of the need to observe restrictions on the use
of radio equipment in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum gas (such as propane
or butane), areas where the air contains chemicals or particles, such as grain,
dust or metal powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless
and landline networks as well as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you should never rely
solely on any wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and
in a service area with adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when certain network services
and/or phone features are in use. Check with local service providers.
Section 14: Health and Safety Information
193
t719.book Page 194 Thursday, June 29, 2006 1:44 PM
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number). Emergency
numbers vary by location.
3. Press
.
If certain features are in use (call barring, for example), you may first need
to deactivate those features before you can make an emergency call. Consult
this document and your local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your phone may be the
only means of communication at the scene of an accident; do not cut off the
call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because
they could hurt themselves and others, damage the phone or make calls that
increase your phone bill.
194
t719.book Page 195 Thursday, June 29, 2006 1:44 PM
FCC Notice and Cautions
FCC Notice and Cautions
FCC Notice
Notes:
The device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The phone may cause TV or radio interference if used in close proximity to
receiving equipment. The FCC can require you to stop using the phone if such
interference cannot be eliminated.
Section 14: Health and Safety Information
195
t719.book Page 196 Thursday, June 29, 2006 1:44 PM
Vehicles using liquefied petroleum gas (such as propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a copy of
this standard, contact the National Fire Protection Association, One Battery
march Park, Quincy, MA 02269, Attn: Publication Sales Division.
Cautions
Changes or modifications made in the radio phone, not expressly approved
by Samsung, will void the user’s authority to operate the equipment.
Only use approved batteries, antennas and chargers. The use of any
unauthorized accessories may be dangerous and void the phone warranty if
said accessories cause damage or a defect to the phone. Although your
phone is quite sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury could
result.
196
t719.book Page 197 Thursday, June 29, 2006 1:44 PM
Product Performance
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to the
aircraft's operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength
in your area. Your phone informs you of the current signal strength by
displaying a number of bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
If you're inside a building, being near a window may give you better
reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the
screen. When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on,
it receives and transmits radio frequency (RF) signals. When you use your
phone, the system handling your call controls the power level. This power
can range from 0.006 watts to 0.2 watts in digital mode.
Section 14: Health and Safety Information
197
t719.book Page 198 Thursday, June 29, 2006 1:44 PM
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service
your phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and
remove the battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require
additional subscription and/or usage charges. Not all features are available
for purchase or use in all areas. Downloadable Ring Tones may be available
at an additional cost. Other conditions and restrictions may apply. See your
service provider for additional information.
198
t719.book Page 199 Thursday, June 29, 2006 1:44 PM
Battery Standby and Talk Time
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and
conditions. Battery power consumption depends on factors such as network
configuration, signal strength, operating temperature, features selected,
frequency of calls, and voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If
you suspect damage to the phone or battery, take it to a service
center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged
and discharged hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby time) is noticeably
shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
Section 14: Health and Safety Information
199
t719.book Page 200 Thursday, June 29, 2006 1:44 PM
• Use only Samsung-approved batteries and recharge your battery
only with Samsung-approved chargers. When a charger is not in
use, disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging
may shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some
website and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily
not work, even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
200
t719.book Page 201 Thursday, June 29, 2006 1:44 PM
Care and Maintenance
• Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare battery in
a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations. In
some areas, the disposal of batteries in household or business
trash may be prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung authorized service center.
Always recycle. Do not dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
Section 14: Health and Safety Information
201
t719.book Page 202 Thursday, June 29, 2006 1:44 PM
• Do not use or store the phone in dusty, dirty areas, as its moving
parts may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the phone warms up to
its normal operating temperature, moisture can form inside the
phone, which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents
to clean the phone. Wipe it with a soft cloth slightly dampened in a
mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving parts
and prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when
overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
202
t719.book Page 203 Thursday, June 29, 2006 1:44 PM
Section 15: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”) warrants to the
original purchaser (“Purchaser”) that SAMSUNG's Phones and accessories
(“Products”) are free from defects in material and workmanship under
normal use and service for the period commencing upon the date of purchase
and continuing for the following specified period of time after that date:
Phone
Batteries
Leather Case/ Pouch
Holster
Other Phone Accessories
1 Year
1 Year
90 Days
90 Days
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper
use of Product by Purchaser. This Limited Warranty does not cover: (a)
defects or damage resulting from accident, misuse, abuse, neglect, unusual
physical, electrical or electromechanical stress, or modification of any part
of Product, including antenna, or cosmetic damage; (b) equipment that has
the serial number removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to normal use;
(d) malfunctions resulting from the use of Product in conjunction with
Section 15: Warranty Information
203
t719.book Page 204 Thursday, June 29, 2006 1:44 PM
accessories, products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation,
maintenance, and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited Warranty covers batteries
only if battery capacity falls below 80% of rated capacity or the battery leaks,
and this Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by SAMSUNG
for charging the battery, (ii) any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used in equipment other
than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole option,
without charge to Purchaser, any defective component part of Product. To
obtain service under this Limited Warranty, Purchaser must return Product
to an authorized phone service facility in an adequate container for shipping,
accompanied by Purchaser's sales receipt or comparable substitute proof of
sale showing the date of purchase, the serial number of Product and the
sellers' name and address. To obtain assistance on where to deliver the
Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective Product. SAMSUNG
may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches
and holsters will be warranted for a period of ninety (90) days. All other
repaired/replaced Product will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or for 90
days, whichever is longer. All replaced parts, components, boards and
equipment shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or
return of such Product.
204
t719.book Page 205 Thursday, June 29, 2006 1:44 PM
Standard Limited Warranty
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
• “THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• “WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• “DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• “THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• “COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND
Section 15: Warranty Information
205
t719.book Page 206 Thursday, June 29, 2006 1:44 PM
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO
USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS
WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR
FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW
PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT
IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
206
t719.book Page 207 Thursday, June 29, 2006 1:44 PM
Standard Limited Warranty
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser
and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of
risk and the limitations of liability contained in this Limited Warranty. The
agents, employees, distributors, and dealers of SAMSUNG are not
authorized to make modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether oral or
written, do not constitute warranties by SAMSUNG and should not be relied
upon.
Samsung Telecommunications America, L.P.
1000 Klein Street
Plano, Texas 75074
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006 Samsung Telecommunications America, L.P. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
Printed in Korea.
Section 15: Warranty Information
207
t719.book Page 208 Thursday, June 29, 2006 1:44 PM
208
t719.book Page 209 Thursday, June 29, 2006 1:44 PM
Section 16: RIM Legal Disclaimer and
Safety Information
Topics Covered
• Legal Disclaimer
• Safety Information
Legal Disclaimer
The BlackBerry and RIM families of related marks, images and symbols are
the exclusive properties and trademarks of Research In Motion Limited. RIM,
Research In Motion, 'Always On, Always Connected', BlackBerry, and
BlackBerry Enterprise Server are registered with the U.S. Patent and
Trademark Office and may be pending or registered in other countries.
The BlackBerry device and/or associated software are protected by
copyright, international treaties, and various patents, including one or more
of the following U.S. patents: 6,278,442; 6,271,605; 6,219,694; 6,075,470;
6,073,318; D445,428; D433,460; D416,256. Other patents are registered or
pending in various countries around the world. Visit www.rim.com/
patents.shtml for a list of RIM [as hereinafter defined] patents.
Section 16: RIM Legal Disclaimer and Safety Information
209
t719.book Page 210 Thursday, June 29, 2006 1:44 PM
Safety Information
Driving
Check the laws and regulations on the use of wireless devices in the areas
where you drive. Always obey them. Also, if using SGH-t719 in your car,
please use the following minimum guidelines:
• Give your full attention to driving; driving safely is your first
responsibility.
• Use hands-free operation, if it is available.email
• Pull off the road and park before using SGH-t719.
Avoid using BlackBerry Connect on SGH-t719 in any environment requiring
your full attention, such as when driving a vehicle. If you need to use
BlackBerry Connect while driving, have a passenger in the vehicle use the
program for you, or find a safe location to stop your vehicle before using the
program.
Liquids and other foreign objects
Do not use BlackBerry Connect on SGH-t719 when you are near water (for
example, near a bathtub or a sink, in a wet basement, or near a swimming
pool).
High heat
Do not use BlackBerry Connect on SGH-t719 when you are near any heat
sources, such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
210
t719.book Page 211 Thursday, June 29, 2006 1:44 PM
Safety Information
Aircraft safety
On an airplane, do not use SGH-t719 with the wireless radio or Bluetooth®
radio turned on. Federal Aviation Administration (FAA) and Federal
Communications Commission (FCC) regulations prohibit using the wireless
radio of SGH-t719 while in the air. Switch SGH-t719’s wireless radio and
Bluetooth radio off before boarding the aircraft. The effect of the use of SGHt719’s wireless radio or Bluetooth radio in an aircraft is unknown. Such use
might affect aircraft instrumentation, communication, and performance;
might disrupt the network; might otherwise be dangerous to the operation
of the aircraft; and might be illegal.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, electronic equipment might not be shielded against the RF
signals from your wireless device.
Pacemakers
Consult a physician or the manufacturer of your pacemaker if you have any
questions regarding the effect of RF signals on your pacemaker. If you have
a pacemaker, verify that you are using SGH-t719 in accordance with the
safety requirements associated with your particular pacemaker, which
might include the following:
• Always keep SGH-t719 more than 20 cm (7 inches) from the
pacemaker when SGH-t719’s wireless radio is turned on.
• Do not carry SGH-t719 in a breast pocket.
• If you have any reason to suspect that interference is taking place,
turn SGH-t719’s wireless radio and the Bluetooth radio off
immediately.
Section 16: RIM Legal Disclaimer and Safety Information
211
t719.book Page 212 Thursday, June 29, 2006 1:44 PM
Hearing aids
Some digital wireless devices might interfere with some hearing aids. In the
event of such interferences, consult your service provider or contact the
manufacturer of your hearing aid to discuss alternatives.
Other medical devices
If you use any other personal medical device, consult the manufacturer of
SGH-t719 to determine if it is adequately shielded from external RF energy.
Your physician might be able to assist you in obtaining this information.
Turn SGH-t719’s wireless radio and Bluetooth radio off in health care
facilities when any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities might be using equipment that could be
sensitive to external RF energy.
Posted facilities
Turn SGH-t719 wireless radio and Bluetooth radio off in any facility where
posted notices so require.
212
t719.book Page 213 Thursday, June 29, 2006 1:44 PM
Index
A
Accessing a menu function 39
Alarms 139
Anykey answer 86
Applications 131
Auto redial 85
B
Backlight
Description 21
Settings 88
Battery
Charging 11
Low indicator 12
BlackBerry email account, setup 113
Bluetooth
Features 99
Phone name 99
Searching for devices 98
Security modes 99
Turning Bluetooth on and
off 98
Visibility 98
Broadcast messages 78
C
Calculator 148
Calendar 134
Call barring 94
Call functions
Adjusting the call volume
25
Answering a call 26
Call records 27
Correcting the number 24
Making a call 23
Making a call from Phonebook 25
Redialing last number 24
Call records
All calls 27
Call time 29
Delete all 29
Incoming calls 29
Missed calls 28
Outgoing calls 29
Call time 29
Call waiting 95
Caller group 56
Caller ID 97
Camcorder
Recording a video 163
Viewing a video 168
Camera
Taking a photo 159
Viewing a photo 166
Change password 101
Charging battery 11
Connection tone 93
Creating appointments 135
D
Date, set 84
Index
213
t719.book Page 214 Thursday, June 29, 2006 1:44 PM
Dialing display 89
Display
Backlight 21
Icons 20
DTMF tones, send 35
E
Entering text
Changing the text entry
method 43
Numbers and special dharacters 48
Using Multi-tap input method 46
Using Speedy word input
method 47
tones 34
Putting a call on hold 33
Sending a message 38
Speakerphone feature 38
Switching on/off microphone 32
Incoming calls 29
Instant messaging 79
International call 23
Internet 171
K
Key tones
Selecting a tone 91
Switching on/off 91
L
F
Low battery indicator 12
FDN (Fixed Dialing Number) mode
101
File manager 141
Functions and options 31
M
G
Games 149
Get More Help 158
Getting started
Activating your phone 9
Setting up voice mail 13
H
Health and safety information 177
HiFi Ringers 90, 141
I
Icons, description 20
In-call options
Accessing Menu mode 38
Muting/Unmuting key
214
Making a call
International call 23
Last number 24
Phonebook 25
MegaTones 90, 141
Menu Navigation
Accessing a menu function
39
Menu outline 41
Message tone 91
Messages
BlackBerry email 62
Broadcast message 78
Instant messaging 79
Picture message 65
PIN message 68
Text message 63
t719.book Page 215 Thursday, June 29, 2006 1:44 PM
Voice mail 78
Voice note message 67
Missed calls 28
Multi-party call
Private conversation 36
Setting up 35
Multi-tap method 46
Mute, microphone 32
My Album 143, 169
My Journal 144, 169
My name card 59
My photos
Deleting photos 167
Using options 166
Viewing photos 166
My videos
Deleting videos 169
Using options 168
Viewing videos 168
N
Network selection 96
Network services
Call barring 94
Call forwarding 93
Call waiting 95
Caller ID 97
Network selection 96
O
Outgoing calls 29
Own number 59
P
Phone
Icons 20
Switching on/off 13
Phone settings 85
Phonebook
Caller group 56
Copying 57
Deleting 58
Finding a contact 52
Storing a contact 49
Picture messages 65
PIN
Changing a PIN 100
PIN check 100
R
Received messages 70
Reset settings 104
Ring volume 90
S
Security settings 100
Sent messages 70
Settings 83
Bluetooth 98
Display 87
Network services 93
Phone 85
Reset 104
Security 100
Sound 90
Time & Date 84
Voice recognition 102
Shortcuts 40
Silent mode 30, 92
SIM card, installing 9
Soft keys 31
Speakerphone 38
Speed dial
Dialing speed dial numbers
55
Index
215
t719.book Page 216 Thursday, June 29, 2006 1:44 PM
Setting up entries 55
Standard limited warranty 203
Stopwatch 157
Storing a number
Phone’s memory 50
SIM card 51
Switching on/off
Key tones 34
Microphone 32
Phone 13
Speaker 38
T
Templates 75
Text entry
Multi-tap input method 44
Speedy word input method
43
Text input method, change 43
Text messages 63
Time, set 84
Timer 156
Travel adapter 11
t-zones 171
U
Understanding your phone
Features of your phone 15
View of your phone 16
Understanding your phonebook
Checking memory status 60
Finding a contact 52
Storing a contact 50, 51
Unit conversion 155
Utilities
Converter 155
Stopwatch 157
216
Timer 156
World time 154
V
Voice mail
Accessing the server 14
Changing the server number 14
Voice note message 67
Voice notes
Recording a voice note 132
Sending a voice note 133
Voice recognition 150
VoiceSignal
Checking phone status 154
Digit dial 150
Features 150
Name dial 151
Name lookup 152
Open applications 153
Send text messages 152
Settings 102
W
Warranty information 203