Crestron DM-MD8X8 Specifications

DM-MD8X8-RPS
8x8 DigitalMedia™ Switcher w/Redundant Power Supply
>> Provides lossless HD AV signal routing over twisted-pair wire
or fiber
>> Integrates video, audio, networking, and control over one wire
>> Affords full matrix switching with ultra high 12.5 Gbps backplane
data rate
>> Handles HDMI® with Deep Color, 3D, and high-bitrate
7.1 encoded audio
>> Supports video resolutions up to WUXGA 1920x1200 and
HD 1080p60
>> Allows up to 330 ft (100 m) wire distance via DM 8G+™[1,6]
>> Allows up to 1000 ft (300 m) wire distance via DM 8G® Fiber[2,6]
>> Allows up to 7.5 miles (12 km) wire distance via DM 8G
Single-Mode Fiber[3,6]
>> Also supports all first-generation DM® CAT and DM Fiber
products[4,5,6]
>> Supports up to 8 DM receivers and room controllers with easy
expansion for more outputs
>> Modular inputs support a complete range of digital and analog
signal types
>> QuickSwitch HD® technology manages HDCP keys for reliable,
low-latency switching
>> Detects and displays detailed video and audio input information
>> Performs automatic AV signal format management via EDID
>> Allows independent scaling for every display through select
DM receivers[8]
>> Enables device control via CEC
>> Distributes USB HID mouse and keyboard signals
>> Allows full audio and USB breakaway switching
>> Integrates with analog audio distribution systems
>> Enables simultaneous output of stereo and surround sound
audio
>> Includes integrated Ethernet switch with Gigabit LAN port
>> Includes built-in power distribution for DM transmitters,
repeaters, and room controllers[9]
>> Built-in redundant power supplies with remote status monitoring
>> Provides easy setup and diagnostics tools via front panel
or software
>> 4-space 19-inch rack-mountable
Crestron® DM® Switchers provide the foundation for a complete
DigitalMedia™ system, delivering an advanced, true high-definition multiroom AV signal routing solution that’s extremely flexible and installerfriendly. The DM-MD8X8-RPS affords low-latency switching and pure,
lossless distribution of HDMI® and other signals to support the latest
Blu-ray Disc® players, HDTV receivers, digital media servers, computers,
and all your other AV devices. Integrated Ethernet networking and USB HID
distribution provide a complete connectivity solution. And naturally,
Crestron control is built in for managing the displays and other room
devices without necessitating any additional wiring. The DM-MD8X8-RPS
also features built-in redundant power supplies to ensure continuous
reliable operation for mission critical applications.
crestron.com
| 800.237.2041
The DM-MD8X8-RPS is field-configurable to handle up to 8 AV sources of
virtually any type. The outputs are also field-configurable to provide up to
8 DM room outputs and/or HDMI outputs in a single chassis, with expansion capability possible for up to 40 outputs using multiple chassis. A full
selection of DM switcher input cards, DM transmitters, and DM receivers
provides extensive connectivity throughout a residence or commercial
facility, supporting a complete range of analog and digital signal types —
all through one switcher!
DigitalMedia thoughtfully manages all of your disparate AV signals and
devices to ensure an optimum video image and audio signal at every
location. User-friendly setup and troubleshooting tools are provided
through the DM-MD8X8-RPS front panel, or via Crestron Toolbox™
software, to make setting up a complete multi-room HD system easy.
DigitalMedia 8G™
You can’t talk about AV and home entertainment today without
talking about high-definition, and creating a professional HD AV
distribution system means handling the challenges that come with HDMI.
HDMI is the standard for interfacing high-definition AV equipment, but
despite its many benefits, wasn’t developed with multi-room distribution in
mind. So, as the leader in HDMI and control system technologies, Crestron
developed DigitalMedia (DM) to deliver the first complete HD AV
distribution system to take HDMI to a higher level. DigitalMedia allows
virtually any mix of HDMI and other AV sources to be distributed throughout
a room, building, or campus.
DigitalMedia 8G is the latest generation of DM, providing a true onewire transport for moving high-definition video, audio, and Ethernet over
low-cost twisted-pair or fiber optic cable without any compression or
repeaters. Engineered for ultra high-bandwidth and ultimate scalability, DM
8G® handles uncompressed video beyond high-definition with support for
HDCP, Deep Color, and 3D. Audio capabilities include simultaneous stereo
and multichannel surround sound signals, with support for high-bitrate 7.1
DM-MD8X8-RPS 8x8 DigitalMedia™ Switcher w/Redundant Power Supply
audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as
uncompressed linear PCM. All signals are transported over one
8-conductor twisted-pair wire or one strand of multimode or single-mode
fiber. DM 8G enables wire distances up to 330 feet (100 m) via DM 8G+™
(DM 8G over CAT5e)[1,6], 1000 ft (300 m) via DM 8G Fiber (DM 8G over
multimode fiber)[2,6], or 7.5 miles (12 km) via DM 8G SM Fiber (DM 8G over
single-mode fiber)[3,6].
The DM-MD8X8-RPS provides full support for Crestron DigitalMedia 8G
devices as well as all first-generation DM CAT[4,6] and DM Fiber[5,6] products,
letting you take advantage of the latest Crestron DM technology without
compromising your existing investment.
Modular Architecture
The DM-MD8X8-RPS features a modular architecture with 8 input card
slots, and 2 quad output card slots. Each card slot on the DM-MD8X8-RPS
is field-installable, allowing for easy and flexible system configuration with
the ability to make changes to the system as needs change.
A wide selection of input cards is offered to support a complete range
of digital and analog AV signal types including HDMI, DVI, DisplayPort
Multimode[7], SDI, RGB and analog video, SPDIF and analog audio, and
DigitalMedia.
One or two output cards may be installed to feed up to 8 DM Receivers/
Room Controllers using your choice of DM 8G+, DM 8G Fiber, DM CAT, or
DM Fiber. Output cards may also be used to feed additional switchers in
other rooms or buildings using any form of DM including long-distance DM
8G SM Fiber. HDMI outputs are available as well for direct connection to
centralized audio processors and video monitors.
Output Expansion
An HDMI “pass-thru” output is provided on every input card to allow the
inputs of up to 5 DM switchers to be daisy-chained, enabling the
configuration of very large distribution systems with many DM and HDMI
outputs. Using five DM-MD8X8-RPS switchers, it is possible to support an
incredible 40 separate outputs.
Computer Compatibility
Besides handling every available HD video format supported by HDMI,
DigitalMedia also supports the distribution of DVI, DisplayPort Multimode[7],
and RGB computer sources, and is fully compatible with DVI computer
monitors up to 1920 x 1200 WUXGA.
EDID Format Management
With all of today’s varied AV sources comes a multitude of confusing video
and audio formats to keep track of, and chances are not every device in
your system supports all of the same formats. Such conflicts can wreak
havoc any time you route one source to more than one display or audio
component. For instance, the Blu-ray player that’s feeding your 1080p
projector in the theater may restrict itself to a lower resolution, or even
shut off completely, if someone decides to view the same signal on the
20” TV in the kitchen. And, instead of enjoying your theater’s incredible
7.1 surround sound, you may find yourself limited to 5.1 or even plain
old stereo.
crestron.com
| 800.237.2041
DigitalMedia eliminates such conflicts by managing the EDID (Extended
Display Identification Data) that many devices use to communicate their
capabilities. Via Crestron Toolbox software, the format and resolution
capabilities of each device can be assessed, allowing the installer to
configure EDID signals appropriately for the most desirable and
predictable behavior.
A Scaler for Every Display
Scaling capability can be added to any DM system using select DM
receivers with built in high-definition scalers.[8] Through a distributed scaler
approach, DigitalMedia delivers an incredibly flexible and user-friendly
solution for routing multiple disparate sources to many different display
devices. By placing an independent high-performance scaler at every
display device, DM ensures an optimal image on every screen no matter
what sources are selected. Distributed scaling allows a high-res computer
source to be viewed on any display in the building. It also allows a highdefinition 3D source to be viewed on lower-resolution 2D displays without
compromising the original signal, letting you share your theater’s full HD
1080p 3D image with smaller, lesser displays in the kitchen, bathroom,
and bedrooms.
QuickSwitch HD® Technology
Handling high-definition digital media means handling HDCP (Highbandwidth Digital Content Protection), the encryption scheme that content
providers use to protect their DVDs, Blu-ray discs, and broadcast signals
against unauthorized copying. Viewing HDCP encrypted content requires a
source device to “authenticate” each display and signal processor in the
system and issue it a “key” before the content can be viewed. Ordinarily
this causes a complete loss of signal for up to 15 seconds each time a new
source or display is selected anywhere in the system. To make matters
worse, every source device has a limited number of keys available, so
connect too many displays and the source will simply stop outputting a
signal without warning.
Not to worry — Crestron QuickSwitch HD manages the keys for every
HDCP-compliant device in the system, maintaining continuous
authentication for each device to ensure fast, reliable routing of any source
to any number of display devices.
Versatile Audio Routing
HDMI is the key to handling all the latest 7.1 surround sound formats like
Dolby TrueHD and DTS-HD Master Audio. Great for your high-end home
theater, but how do you share that same source with other audio zones in
the house?
DigitalMedia provides the answer, allowing for the simultaneous
distribution of multi-channel surround sound and two-channel stereo
signals from the same HDMI source. Using a choice of DSP-based input
cards, the DM-MD8X8-RPS employs onboard digital processing to derive
a stereo down-mix from the original multi-channel signal. Both signals
can be routed separately or simultaneously from any of the switcher’s
DM outputs, allowing either signal to be selected for output at each DM
receiver location.
Back at the switcher, the digital stereo signal is also converted to analog to
enable sharing with every other room in the house via a Sonnex™, Adagio®,
or other multi-room audio distribution system. The DM-MD8X8-RPS also
DM-MD8X8-RPS 8x8 DigitalMedia™ Switcher w/Redundant Power Supply
allows bulky surround sound processors and amplifiers to be located
centrally instead of at the display location via optional local HDMI outputs.
Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can also
extend 10/100 Ethernet out to each display and source device via DM
room controllers and select DM transmitters, providing high-speed
connectivity for any room device that requires a LAN connection.
Ethernet is also utilized internally by the Crestron control bus to manage all
of the DM devices in the system and provide display control in each room.
Through its Gigabit Ethernet port, the DM-MD8X8-RPS provides a singlepoint connection to a corporate LAN or home network, requiring just one IP
address for the complete DM system.
USB HID Switch
DigitalMedia lets you centralize ALL of your HD sources - not just
television receivers and DVD changers, but also media servers and
computers. Built-in USB HID (Human Interface Device) signal routing allows
USB HID compatible keyboards and mice to be connected at a remote
display location, conference table or presentation lectern, extending their
signals through to the centralized equipment via USB HID ports provided on
select switcher input cards.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the
control desired for a seamless user experience. DigitalMedia provides an
alternative to conventional IR and RS-232 device control by harnessing the
CEC (Consumer Electronics Control) signal embedded in HDMI. Through its
connection to the control system, the DM-MD8X8-RPS provides a gateway
for controlling many devices right through their HDMI connections,
potentially eliminating the need for any dedicated control wires or IR
probes. Through proper CEC signal management, DigitalMedia allows you
to take control of each device as you like.
Easy Setup
Via the front panel or using Crestron Toolbox software, every step of the
DM-MD8X8-RPS’s setup process is designed to be quick and easy,
configuring inputs and outputs automatically while letting the installer
make intelligent design decisions along the way. The switcher even tests
and measures the length of each DM cable, automatically making the
appropriate calibrations for optimal signal transmission to every room. With
DigitalMedia, an entire 8x8 system can be commissioned in as little as
15 minutes.
Redundant Power Supplies
The DM-MD8X8-RPS model delivers enhanced reliability for mission
critical applications employing extreme long-life, redundant power supplies
to ensure continuous dependable operation throughout the life of the
system. Each of its internal switch-mode power supplies has a
demonstrated MTBF (Mean Time Between Failures) of over 1,000,000
hours, and in the unlikely event of an individual power supply fault, the
DM-MD8X8-RPS will continue to operate unhindered on only one power
supply. Clear indication of such a fault is provided on the unit’s front panel
via a flashing red LED, with individual green LEDs also provided to show
the status of each individual power supply. The power supplies can even
be remotely monitored via Crestron RoomView® software or any control
system touch screen.
crestron.com
| 800.237.2041
To configure a DM switcher complete with input and output cards, cables,
and other peripherals, please use the DigitalMedia™ Switcher
Configuration Tool.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
SPECIFICATIONS
Video
Switcher: 8x8 digital matrix, modular input/output cards, Crestron
QuickSwitch HD®
Input Signal Types: Configurable via modular plug-in cards supporting
HDMI®, DisplayPort Multimode[7], DVI, SDI, RGB, component (YPbPr),
S-Video (Y/C), composite video, DM CAT, DM Fiber, DM 8G+, DM 8G Fiber,
and DM 8G SM Fiber
Output Signal Types: Configurable via modular plug-in cards
supporting DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, DM 8G SM Fiber,
HDMI, and DVI[10] (All input cards also include HDMI pass-thru outputs)
Formats: HDMI w/Deep Color & 3D, DVI, HDCP content protection support,
SD-SDI, HD-SDI, 3G-SDI, computer up to UXGA/WUXGA, HD up to 1080p60,
NTSC or PAL
Input Resolutions, HDMI & DVI, Progressive: 640x480@60Hz,
720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz,
848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz,
1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50),
1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,
1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz,
1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz,
1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz
(1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60),
1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other
resolution allowed by HDMI up to 165MHz pixel clock
Input Resolutions, HDMI & DVI, Interlaced: 720x480@30Hz (480i),
720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz
(1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel
clock
Input Resolutions, RGB: 640x480@60Hz, 720x480@60Hz
(480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz,
1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60),
1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz
Input Resolutions, Component: 480i, 576i, 480p, 576p, 720p50, 720p60,
1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines),
1080p60
Input Resolutions, Composite and S-Video: 480i, 576i
Input Resolutions, SDI: (see DMC-SDI spec sheet)
Output Resolutions: Matched to inputs
Backplane Data Rate: 12.5 Gbps
DM-MD8X8-RPS 8x8 DigitalMedia™ Switcher w/Redundant Power Supply
Audio
Switcher: 8x8 digital multi-channel audio-follow-video matrix switching,
plus independent 8x8 stereo matrix for audio breakaway
Input Signal Types: Configurable via modular plug-in cards supporting
HDMI, DisplayPort Multimode[7], SDI, analog (stereo 2-channel), SPDIF,
DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, and DM 8G SM Fiber
Output Signal Types: Configurable via modular plug-in cards
supporting DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, DM 8G SM Fiber,
HDMI, and analog (stereo 2-channel); (All input cards also include HDMI
pass-thru outputs, and most digital audio input cards also include analog
stereo pass-thru audio outputs)
Formats, HDMI only: Dolby Digital® Plus, Dolby® TrueHD,
DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM
Formats, HDMI and SPDIF: Dolby Digital, Dolby Digital EX, DTS®, DTS-ES,
DTS 96/24, 2ch PCM
Formats, Analog: Stereo 2-Channel
Formats, SDI: (see DMC-SDI spec sheet)
Communications
DigitalMedia: DM Fiber, DM CAT, DMNet®, DM 8G+, DM 8G Fiber,
DM 8G SM Fiber, HDCP management, EDID format management, CEC
Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating,
auto-discovery, full/half duplex, DHCP
USB: Supports USB HID class devices
Ethernet Switch
Provides (1) onboard 10/100/1000Base-T Gigabit Ethernet port, (1) internal
10Base-T/100Base-TX Ethernet port for the switcher, and (16) remote
10Base-T/100Base-TX Ethernet ports via select outboard devices
USB Switch
8x8 matrix
Card Slots
1 – 8: (8) DM switcher input card slots;
Each slot accepts (1) DMC-series input card
DM OUTPUTS (SLOT 1 – 2): (2) DM switcher output card slots;
Each slot accepts (1) DMCO-series output card
Connectors
100-240V~225W 50/60Hz: (1) IEC C14 male chassis plug, main power
input;
Mates with removable power cord, included
G: (1) 6-32 screw, chassis ground lug
COMPUTER (front): (1) USB Type B female;
USB computer console port (6 ft cable included)
LCD Display
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight;
Displays inputs/outputs by name, video & audio signal information,
Ethernet configuration and setup menus
Controls & Indicators
SOFTKEYS: (4) pushbuttons for activation of LCD driven functions
HW-R: (1) recessed miniature pushbutton for hardware reset, reboots the
switcher
ROUTE: (1) pushbutton and red LED, selects ROUTE mode to allow routing
changes
VIEW: (1) pushbutton and red LED, selects VIEW mode for viewing current
routes
INFO: (1) pushbutton and red LED, selects INFO mode for viewing AV and
device info
MENU: (1) pushbutton, steps menu back one level
ENTER: (1) pushbutton, executes highlighted menu or value
AUDIO: (1) pushbutton & red LED, selects audio routing view
VIDEO: (1) pushbutton & red LED, selects video routing view
USB: (1) pushbutton & red LED, selects USB routing view
Quick-Adjust Knob: (1) continuous turn rotary encoder, adjusts menu
parameters
IN 1 – 8: (8) pushbuttons and red LEDs, select input for routing
OUT 1 – 8: (8) pushbuttons and red LEDs, select output for routing
POWER SUPPLIES, 1 – 2: (2) green LEDs, indicate when each
corresponding internal supply is functioning
POWER SUPPLIES, FAULT: (1) red flashing LED, indicates a fault with
either internal supply
LAN (rear): (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
Power Requirements
LAN: (1) 8-wire RJ45 female;
10/100/1000Base-T Ethernet port
24ABG / EIG 1 – 4 (SLOT 1 – 2): (8) sets of (1) 4-pin and (1) 3-pin 3.5mm
detachable terminal blocks;
Comprises (8) DMNet ports with “EIG” power selection ports, each set
associated with a corresponding DM CAT output port on the output card in
either output slot;
Each DMNet port provides power and communications for a DM CAT
device connected via DM cable;
Each EIG port connects to an external power supply[9] to power the DM CAT
device connected to the corresponding DMNet port;
crestron.com
Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) per port, limited to
available DMNet power from external power supply[9]
| 800.237.2041
Main Power: 225 Watts @ 100-240 Volts AC, 50/60 Hz
Available DMNet Power: none
Redundant Power Supplies
Quantity/Type: (2) switch-mode, internal
Demonstrated MTBF: >1,000,000 hours per power supply @ full load and
25°C ambient conditions
Redundancy: Complete unit continues to operate at full capacity on one or
more functioning power supplies
DM-MD8X8-RPS 8x8 DigitalMedia™ Switcher w/Redundant Power Supply
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 750 BTU/Hr
Enclosure
Chassis: Metal with black finish, vented sides, fan-cooled
Faceplate: Extruded aluminum, black finish with polycarbonate label
overlay
Mounting: Freestanding or 4U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
Height: 6.97 in (177 mm) without feet
Width: 17.28 in (439 mm), 19.00 in (483 mm) with ears
Depth: 15.70 in (399 mm) without cards
Weight
20.0 lb (9.1 kg) without cards
MODELS & ACCESSORIES
Available Models
DM-MD8X8-RPS: 8x8 DigitalMedia™ Switcher w/Redundant Power Supply
Available Accessories
DMC-HD: HDMI® Input Card
DMC-HD-DSP: HDMI® Input Card w/Down-mixing
DMC-DVI: DVI/RGB Input Card
DMC-VID-RCA-A: RCA Analog Video Input Card w/Analog Audio
DMC-VID-RCA-D: RCA Analog Video Input Card w/SPDIF Audio
DMC-VID-BNC: BNC Analog Video Input Card
DMC-VID4: Quad Video Input Card
DMC-SDI: SDI Input Card
DMC-CAT: DigitalMedia™ CAT Input Card
DMC-CAT-DSP: DigitalMedia™ CAT Input Card w/Down-mixing
DMC-F: DigitalMedia™ Fiber Input Card
DMC-F-DSP: DigitalMedia™ Fiber Input Card w/Down-mixing
DMC-C: DigitalMedia 8G+™ Input Card
DMC-C-DSP: DigitalMedia 8G+™ Input Card w/Down-mixing
DMC-S: DigitalMedia 8G™ Fiber Input Card
DMC-S-DSP: DigitalMedia 8G™ Fiber Input Card w/Down-mixing
DMC-S2: DigitalMedia 8G™ Single-Mode Fiber Input Card
DMC-S2-DSP: DigitalMedia 8G™ Single-Mode Fiber Input Card w/Downmixing
DMCO-10: 2 DM Fiber Output Card
DMCO-11: 4 DM Fiber Output Card
DMCO-20: 2 DM CAT w/1 HDMI Output Card
DMCO-22: 4 DM CAT w/2 HDMI Output Card
DMCO-40: 2 DM 8G Fiber w/1 HDMI Output Card
crestron.com
| 800.237.2041
DMCO-44: 4 DM 8G Fiber w/2 HDMI Output Card
DMCO-50: 2 DM 8G+ w/1 HDMI Output Card
DMCO-55: 4 DM 8G+ w/2 HDMI Output Card
DMCO-30: 2 HDMI w/2 Stereo Analog Audio Output Card
DMCO-33: 4 HDMI w/4 Stereo Analog Audio Output Card
DMCO-12: 2 DM Fiber & 2 DM CAT w/1 HDMI Output Card
DMCO-15: 2 DM Fiber & 2 DM 8G+ w/1 HDMI Output Card
DMCO-13: 2 DM Fiber & 2 HDMI w/2 Stereo Analog Audio Output Card
DMCO-23: 2 DM CAT w/1 HDMI & 2 HDMI w/2 Stereo Analog Audio Output
Card
DMCO-45: 2 DM 8G Fiber w/1 HDMI & 2 DM 8G+ w/1 HDMI Output Card
DMCO-43: 2 DM 8G Fiber w/1 HDMI & 2 HDMI w/2 Stereo Analog Audio
Output Card
DMCO-53: 2 DM 8G+ w/1 HDMI & 2 HDMI w/2 Stereo Analog Audio
Output Card
DM-CBL-NP: DigitalMedia™ Cable, non-plenum
DM-CBL-P: DigitalMedia™ Cable, plenum-rated
DM-CBL-D-NP: DigitalMedia™ D Cable, non-plenum
DM-CBL-D-P: DigitalMedia™ D Cable, plenum
DM-CONN-20: DigitalMedia™ Cable Connectors, 20-Pack
DM-DR: DigitalMedia™ Repeater
DM-CBL-8G-NP: DigitalMedia 8G™ Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G™ Cable, plenum
DM-8G-CONN-100: DigitalMedia 8G™ Cable Connector, 100-Pack
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
CRESFIBER8G-NP: CresFiber® 8G Fiber Optic Cable, 50/125 x4 breakout,
non-plenum
CRESFIBER8G-P: CresFiber® 8G Fiber Optic Cable, 50/125 x4 breakout,
plenum
CRESFIBER-CONN-SC50UM-12: CresFiber® Fiber Optic Cable Connector
(AFL Telecommunications™), SC 50µm, 12-Pack
CRESFIBER8G-SM-P: CresFiber® 8G Single-Mode Fiber Optic Cable,
plenum
CRESFIBER8G-SM-CONN-LC-12: CresFiber® 8G Single-Mode Fiber Optic
Cable Connector, LC, 12-Pack
CRESFIBER-TK: CresFiber® Termination Kit (AFL Telecommunications™)
CRESFIBER-DUAL-SC-P: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum
CRESFIBER-DUAL-SC-ARMORED-P: CresFiber® ARMORED Duplex Fiber
Optic Cable Assembly, 50/125, SC, Armored, Plenum
CRESFIBER-SINGLE-SC-P: CresFiber® Simplex Fiber Optic Cable Assembly, 50/125, SC, Plenum
CRESFIBER-SINGLE-SC-ARMORED-P: CresFiber® ARMORED Simplex
Fiber Optic Cable Assembly, 50/125, SC, Armored, Plenum
CRESFIBER-SINGLE-SC-CLEAR-NP: CresFiber® CLEAR Simplex Fiber
Optic Cable Assembly, 50/125, SC, Non-Plenum
DM-MD8X8-RPS 8x8 DigitalMedia™ Switcher w/Redundant Power Supply
Notes:
1. The maximum DigitalMedia 8G+ cable length is 330 ft (100 m) using DM-CBL-8G
DigitalMedia 8G cable, DM-CBL DigitalMedia Cable, DM-CBL-D DigitalMedia D Cable, or
generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to
safeguard against unpredictable environmental electrical noise which may impact performance
at resolutions above 1080p.
2. The maximum DigitalMedia 8G Fiber cable length is 1000 ft (300 m) using CRESFIBER8G fiber
optic cable, or 500 ft (150 m) using standard CRESFIBER, CRESFIBER-SINGLE-SC, or generic
OM3 simplex multimode fiber optic cable.
3. The maximum DigitalMedia 8G Single-Mode Fiber cable length is 7.5 miles (12 km) using
CRESFIBER8G-SM or generic G.652.D (or better) single-mode fiber optic cable.
4. The maximum DigitalMedia CAT cable length is 450 ft (137 m) using DM-CBL DigitalMedia
Cable. Actual cable length depends upon multiple factors. Up to two DM Repeaters (Model
DM-DR) may be required.
5. The maximum DigitalMedia Fiber cable length is 1000 ft (300 m) using CRESFIBER,
CRESFIBER8G, CRESFIBER-DUAL-SC, or generic OM2/OM3 duplex multimode fiber optic
cable.
6. Refer to the DigitalMedia Infrastructure Guide, Doc. #4556 for complete wiring guidelines, and
the Crestron DigitalMedia Design Guide, Doc. #4789 for complete system design guidelines.
All cable sold separately.
7. DisplayPort Multimode connectivity is supported via an HDMI or DVI input port using a suitable
adapter or interface cable.
8. DM receivers with built-in scaling include the DM-RMC-SCALER-C, DM-RMC-SCALER-S,
DM-RMC-200-C, and DM-RMC-200-S. All DM receivers sold separately.
9. External power supply required, sold separately. For external DMNet power, use a Crestron
CNPWS-75, C2N-SPWS300, or other Cresnet power supply as required. Do not interconnect
DMNet with Cresnet.
10. DVI output is supported via an HDMI output port using a suitable adapter or interface cable.
CBL-HD-DVI interface cable available separately.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in
typography or photography.
The specific patents that cover Crestron products are listed at www.crestronpatents.com.
Adagio, CresFiber, Crestron, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia
8G+, DM, DM 8G, DM 8G+, DMNet, QuickSwitch HD, Sonnex, and the Crestron logo are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. Blu-ray Disc is either a trademark or registered trademark of the Blu-ray Disc
Association in the United States and/or other countries. Dolby, Dolby Digital, and the double-D
symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States
and/or other countries. DTS, DTS-HD Master Audio, and the DTS logos and Symbol are either
trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries.
HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC
in the United States and/or other countries. Other trademarks and trade names may be used
in this document to refer to either the entities claiming the marks and names or their products.
Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron
Electronics, Inc.
crestron.com
| 800.237.2041
DM-MD8X8-RPS |
8x8 DigitalMedia™ Switcher w/Redundant Power Supply
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
| Fax: 201.767.1903
All Crestron products are proudly manufactured in the United States.
All brand names, product names and trademarks are the property of their respective owners.
©2012 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 01/26/12