TD 92319GB
User Manual
Ascom i75 VoWiFi Handset
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Contents
1 Introduction............................................................................................................. 1
1.1 Abbreviations and Glossary ................................................................................ 1
1.2 Versions ............................................................................................................. 1
1.3 Functions ........................................................................................................... 2
1.4 Accessories ........................................................................................................ 2
2 Guideline for Safety and Efficiency for the i75 VoWiFi Handsets ....................... 3
2.1 Precautions ........................................................................................................ 3
2.2 Environmental Requirements .............................................................................. 4
2.3 Frequency Range ............................................................................................... 4
2.4 Warranty Notification ......................................................................................... 5
2.5 Potentially Explosive Atmospheres ...................................................................... 5
2.6 Regulatory Compliance Statements (EU/EFTA only) ............................................. 5
2.7 Regulatory Compliance Statements (USA and Canada only) ............................... 5
3 Description of the Handset .................................................................................... 7
3.1 Handset Overview .............................................................................................. 7
3.2 Keys and Buttons ............................................................................................... 8
3.2.1 Navigation key ........................................................................................... 8
3.2.2 Off-hook Key ............................................................................................. 8
3.2.3 Volume Button .......................................................................................... 9
3.2.4 Alarm Button ............................................................................................. 9
3.2.5 Mute Button .............................................................................................. 9
3.2.6 Soft Keys ................................................................................................... 9
3.2.7 On/Off and On-hook Key ......................................................................... 10
3.2.8 Alpha Numeric Keys ................................................................................. 10
3.2.9 Hot Keys .................................................................................................. 11
3.3 Icons and Text in the Display ............................................................................ 11
3.4 Handset Memory ............................................................................................. 13
4 Accessories............................................................................................................. 14
4.1 Belt Clip, Swivel-type ....................................................................................... 14
4.2 Leather Casing ................................................................................................. 14
4.3 Headset ........................................................................................................... 14
4.4 Security String .................................................................................................. 14
4.5 USB Programming Device ................................................................................. 14
5 Chargers................................................................................................................. 15
5.1 Desktop Charger .............................................................................................. 15
5.2 Wall Mounted Charging Racks ......................................................................... 15
6 Navigate the Menu ............................................................................................... 16
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
6.1 Enter/Exit the Menu Mode ............................................................................... 16
7 Menu Tree Structure ............................................................................................. 17
7.1 Contacts .......................................................................................................... 17
7.2 Messages ......................................................................................................... 17
7.3 Call List ............................................................................................................ 17
7.4 Services ............................................................................................................ 17
7.5 Settings ........................................................................................................... 18
7.6 Profiles ............................................................................................................ 19
7.7 Customize the Menu Tree ................................................................................ 19
7.8 In Call Menu .................................................................................................... 20
8 Basic Operation ..................................................................................................... 21
8.1 Switch the Handset On/Off .............................................................................. 21
8.2 Log a Shared Phone On/Off .............................................................................. 21
8.3 Turn Audible Signals On/Off ............................................................................. 21
8.4 Lock/Unlock the Keypad ................................................................................... 21
8.5 Lock/Unlock the Handset ................................................................................. 22
9 Calling .................................................................................................................... 23
9.1 Open the Call List ............................................................................................ 23
9.2 Incoming Call ................................................................................................... 23
9.2.1 Turn Off Alert Signals at an Incoming Call ................................................ 23
9.2.2 End a Call ................................................................................................ 23
9.3 Outgoing Call .................................................................................................. 23
9.3.1 Pre-dial .................................................................................................... 23
9.3.2 Post-dial .................................................................................................. 24
9.3.3 Dial Using a Pre-programmed Hot key or Soft key .................................... 24
9.3.4 Dial a Number from the Call list ............................................................... 24
9.3.5 Dial a Number from a Message ................................................................ 24
9.3.6 Dial a Number from the Local Phonebook ................................................ 24
9.3.7 Dial a Number from the Central Phonebook ............................................. 24
9.4 During a Call .................................................................................................... 24
9.4.1 Start a New Call during Conversation ....................................................... 24
9.4.2 Transfer/Retrieve a Call ............................................................................. 24
9.4.3 “Blind” Transfer ....................................................................................... 24
9.4.4 Put a Call on Hold/Retrieve the Call .......................................................... 25
9.4.5 Turn the Mute Mode On/Off .................................................................... 25
9.4.6 Increase/Decrease the Speaker Volume ..................................................... 25
9.5 Loudspeaking Function .................................................................................... 25
10 Call Diversion....................................................................................................... 26
10.1 Preset the Telephone Numbers ....................................................................... 26
10.2 Divert Calls .................................................................................................... 26
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
11 Push-to-Talk Conference Call.............................................................................. 27
11.1 Send an Invitation to a PTT Group .................................................................. 27
11.2 Accept a PTT Conference Call ........................................................................ 27
11.3 Reject a PTT Conference Call .......................................................................... 27
12 Messaging............................................................................................................ 28
12.1 Message List .................................................................................................. 28
12.1.1 Display and Scroll between Messages ..................................................... 28
12.1.2 Read Stored Messages ........................................................................... 29
12.1.3 Message Queuing and Message Priority ................................................. 30
12.2 Basic Message Handling ................................................................................. 32
12.2.1 Receive a Message ................................................................................. 32
12.2.2 Receive a Message during a Call ............................................................ 32
12.2.3 Receive a Message with Request for Answer .......................................... 32
12.2.4 Delete a Message ................................................................................... 32
12.3 Messaging between Handsets ........................................................................ 33
12.3.1 Send a Message to another Handset ...................................................... 33
12.4 Send a Message to a predefined Destination Address ..................................... 33
12.5 Interactive Messaging .................................................................................... 33
12.5.1 Interactive Messages with Function Keys ................................................ 34
12.5.2 Interactive Messages without Function Keys ........................................... 34
12.5.3 Multilayer Interactive Messaging ............................................................ 34
12.6 Voice Mail ...................................................................................................... 34
12.6.1 Receive a Voice Mail ............................................................................... 34
12.7 Send Data from the Handset .......................................................................... 34
12.7.1 Data Send .............................................................................................. 34
12.7.2 Send Data with a Prefix .......................................................................... 34
13 Presence Management ....................................................................................... 35
13.1 Select Presence Activity .................................................................................. 35
14 Alarm Operation ................................................................................................. 36
14.1 Acoustic Localisation Signal ............................................................................ 36
14.2 Push-button Alarm ......................................................................................... 36
14.3 Test Alarm ...................................................................................................... 36
14.4 No-movement Alarm ..................................................................................... 36
14.5 Man-down Alarm .......................................................................................... 37
14.5.1 Delay Time for No-movement and Man-down Alarms Warning Signal .... 37
14.6 Alarm with Data ............................................................................................ 37
14.7 Automatic Call after an Alarm ........................................................................ 37
14.8 Automatic Alarm after an Emergency Call ...................................................... 38
15 Menu Operation.................................................................................................. 39
15.1 Contacts ........................................................................................................ 39
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
15.1.1 Find an Entry in the Local Phonebook ..................................................... 39
15.1.2 View an Entry in the Local Phonebook ................................................... 39
15.1.3 Add an Entry to the Local Phonebook .................................................... 39
15.1.4 Delete an Entry in the Local Phonebook ................................................. 40
15.1.5 Edit an Entry in the Local Phonebook ..................................................... 40
15.1.6 Find an Entry in the Central Phonebook ................................................. 41
15.1.7 Delete the Central Phonebook Search Result .......................................... 41
15.1.8 Add an Entry from the Search Result to the Local Phonebook ................ 41
15.1.9 Send a Message to an Entry in Contacts ................................................. 41
15.2 Messages ....................................................................................................... 41
15.2.1 Message List .......................................................................................... 42
15.3 Call List .......................................................................................................... 43
15.3.1 Save a Number from the Call List to the Local Phonebook ...................... 43
15.3.2 Delete a Number in the Call List ............................................................. 43
15.3.3 Delete All Numbers in the Call List ......................................................... 43
15.4 Services .......................................................................................................... 43
15.4.1 Activate a Service ................................................................................... 44
15.4.2 Create a new Service ............................................................................. 44
15.4.3 Edit a Service ......................................................................................... 44
15.4.4 Delete a Service ..................................................................................... 45
15.5 Settings ......................................................................................................... 45
15.5.1 Change the Ring Volume ....................................................................... 45
15.5.2 Change the Ring Signal .......................................................................... 46
15.5.3 Change the Speaker, Loudspeaker or Headset Volume ........................... 46
15.5.4 Vibrator On/Off ...................................................................................... 46
15.5.5 Key Beep On/Off .................................................................................... 46
15.5.6 Deactivate/Activate No-movement alarm ................................................ 46
15.5.7 Deactivate/Activate Man-down alarm1 ................................................................. 46
15.5.8 Edit a Soft key ........................................................................................ 47
15.5.9 Edit a Hot key ........................................................................................ 48
15.5.10 Select Language ................................................................................... 48
15.5.11 Change Text Size in Messages .............................................................. 49
15.5.12 Lock the Handset Manually .................................................................. 49
15.5.13 Change the Lock Code1 .......................................................................................... 49
15.5.14 Time and Date Settings ........................................................................ 49
15.5.15 Turn On/Off Automatic Keypad Lock .................................................... 49
15.5.16 Enable/Disable Quick Answer ............................................................... 50
15.5.17 Display New Messages 180º Rotated (upside down) ............................. 50
15.5.18 Set Owner ID ....................................................................................... 50
15.5.19 Change Display Contrast ...................................................................... 50
15.5.20 Select System ....................................................................................... 50
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
15.5.21 System Information .............................................................................. 51
15.6 Profiles ........................................................................................................... 51
15.6.1 Change between the Profiles ................................................................. 52
15.6.2 Change Profile Settings .......................................................................... 52
15.6.3 Set the Profile to Absent On/Off ............................................................. 52
15.6.4 Choose the Profile’s Answering method ................................................. 52
15.6.5 Set the Profile to Divert incoming Calls ................................................... 52
15.6.6 Preset Phone Numbers for the Diversions alternatives ............................. 53
15.6.7 Customizing the Profiles Menu .............................................................. 53
16 System Handling ................................................................................................. 54
16.1 Register a New VoWiFi System ....................................................................... 54
16.2 Field Upgrade ................................................................................................ 54
17 Status text in Display.......................................................................................... 55
17.1 Accessibility and Voice Quality ........................................................................ 55
17.2 Error Codes .................................................................................................... 55
17.3 Environmental Requirements .......................................................................... 56
18 Maintenance........................................................................................................ 57
18.1 Charge the Battery ......................................................................................... 57
18.1.1 Charging Spare Batteries ........................................................................ 57
18.2 Remove the Battery ........................................................................................ 57
18.3 Change the Clip ............................................................................................. 58
19 Related Documents ............................................................................................. 59
20 Document History ................................................................................................ 60
Index ....................................................................................................................... 61
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
1
TD 92319GB
Introduction
The Ascom i75 VoWiFi Handset is part of the Ascom VoWiFi system. With the i75 VoWiFi
handset you can maintain connectivity to traditional telephone services while remaining
mobile around the work environment.
This document describes the features and settings available for the i75 VoWiFi Handset.
All procedures in this document are according to default programmed versions, but
additional functions and factory settings are also included as an attempt to cover all
functionality.
Note: 1) Some functions are PBX and protocol (H.323/SIP) dependent and your system
may not supply all functions described in this document. For more information about your
system please contact the person (or department) responsible for the system in your
organization, or contact your supplier.
2) This document includes important safety information and operating instructions, see
chapter 2 Guideline for Safety and Efficiency for the i75 VoWiFi Handsets on page 3.
Please read this information before using your i75 VoWiFi handset and save this manual
with all instructions for future reference.
1.1
1.2
Abbreviations and Glossary
ESSID
Extended Service Set Identifier: Identifier for the mobile devices
attempting to connect to the VoWiFi system.
IMS/IP
Integrated Message Server for the VoWiFi system.
IP
Internet Protocol: Global standard that specifies the format of
datagrams and the addressing scheme.
PDM
Portable Device Manager: Used for management of portables,
editing of parameters and updating the portables with new
software.
VoIP
Voice over Internet Protocol
VoWiFi
Voice over Wireless Fidelity: Is a wireless version of VoIP and
reefers to IEEE 802.11a, 802.11b or 802.11g network.
WiFi
Wireless Fidelity: Is used generically when referring of any type
of 802.11 network.
Versions
The Ascom i75 VoWiFi Handset is a robust handset designed for people working in tough
environments. It is suitable for users dependent of being reachable and/or having a need
for advanced mobile messaging functions. The handset comes in three versions;
i75 Messenger, i75 Protector and i75 Medic Protector.
2008-11-10/ Ver. D
1
User Manual
Ascom i75 VoWiFi Handset
1.3
TD 92319GB
Functions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Local phonebook
Central phonebook
Vibrator
Headset connector
Loudspeaking
Microphone on/off during call
Presence*
Push-To-Talk (PTT)*
Messaging*
Acknowledge*
Interactive messaging*
Group messaging*
Voice mail*
Data send*
Data with prefix*
Personal alarm (Protector versions only)
Alarm with data (Protector versions only)
Location
Ekahau RTLS
Man-down & No-movement alarm (Protector versions only)
Field upgradable software
* System dependent feature
1.4
Accessories
• Headset
- with mic (2 types)
- with hearing protection
• Belt clip
- hinge-type
- swivel-type
• Leather casing
• Security string
• Desktop charger
• Charging rack
• Battery pack charger (each module supports eight batteries)
• Spare battery
• USB programming device
2008-11-10/ Ver. D
2
User Manual
Ascom i75 VoWiFi Handset
2
TD 92319GB
Guideline for Safety and Efficiency for the i75 VoWiFi Handsets
Read this chapter before using the i75 VoWiFi Handset.
For safe and efficient operation of the handset, observe the guidelines given in this
manual and all necessary safety precautions when using the handset. Follow the operating
instructions and adhere to all warnings and safety precautions located on the product, the
Quick Reference Guide and this User Manual.
This product shall only be used with the following batteries:
•
•
•
•
Art.No: 660105 Battery Standard
Art.No: 660106 Battery Extended
Art.No: 660107 Battery Medic Standard
Art.No: 660108 Battery Medic Extended
Desktop chargers shall only be connected with power adapters supplied by the
manufacturer.
Available power adapters are:
Art.No: FW7650 Power supply univ. AC/5V DC/1A
2.1
Precautions
• Save this manual. It includes important safety information and operating instructions.
Save all instructions for future reference.
• Connect AC (power supply) to the desktop battery charger only to designated power
sources as marked on the product.
Danger: Never alter the AC cord or plug. If the plug will not fit into the outlet, have a
proper outlet installed by a qualified electrician. Improper connection increases the risk
of electric shock.
• Position the electrical cord to the AC power supply where it is least likely to be
subjected to damage or stress.
• Remove the electrical cord from an outlet by pulling gently on the AC adapter, not by
pulling the cord.
• Remove the battery before cleaning the telephone to reduce risk of electric shock.
• Unplug the battery charger from a power source before cleaning the handset to reduce
risk of electric shock.
• Do not use auxiliary equipment with the handset which is not exclusively
recommended by the manufacturer, see 1.4 Accessories on page 2. The use of any
auxiliary equipment not recommended by the manufacturer may result in fire, electric
shock, or injury, and will void the warranty.
• Do not expose the handset to open flame.
• Do not expose the handset and the charger to direct sunlight for long periods. Keep
the handset and charger away from excessive heat and moisture.
• Protect your handset from aggressive liquids and vapours.
• Keep the handset away from strong electromagnetic fields.
• Do not allow heavy objects to fall on the handset.
• Do not allow children to play with the product packaging material. Product packaging
material is often small and may present a choking hazard.
• Do not allow children to play with the handset. It is not a toy. Children could hurt
themselves or others. Children could also damage the handset.
• Do not expose to prolong light
2008-11-10/ Ver. D
3
User Manual
Ascom i75 VoWiFi Handset
•
•
•
•
•
•
•
•
2.2
TD 92319GB
Battery
Do not immerse the battery into water. This could short-circuit and damage the
battery.
Do not expose a battery to an open flame. This could cause the battery to explode.
Do not allow the metal contacts on the battery to touch another metal object. This
could short-circuit and damage the battery.
Do not leave a battery where it could be subjected to extremely high temperatures,
such as inside a car on a hot day.
Use the Desktop Charger or the wall mounted Charging Rack for charging. Charge the
battery for at least one hour the first time you use the battery. Note that the wall
mounted charger with a battery pack adapter has to be used if the battery alone is to
be charged.
Do not attempt to take a battery apart.
Do not disconnect the battery unless it needs to be replaced.
Do power the handset off before removing the battery.
Environmental Requirements
Cordless Handset
• Only use the handset in temperatures between 0 oC to +40 oC (32o F to 140o F).
Battery
• Do not charge a battery when the ambient room temperature is above 40 ºC or below
5 ºC (above 104º F or below 41 ºF).
Battery disposal
Defective batteries must be returned to a collection point for chemical waste disposal.
Chemical Resistance
The alpha and numeric characters printed on the exterior of the handset have been tested
and found resistant to chipping, fading or wearing off when the handset is treated with
common cleaners and disinfectants or perspiration. The following chemicals have shown
no harmful effect:
• 3% Hydrochloric Acid
• M-alcohol (70% Methylated Ethanol)
• 60% Chlorhexidin 0.5mg/ml
Acetone can be damaging to the plastic casing of the handset and should not be used.
2.3
Frequency Range
The handset is a radio transmitter and receiver. When it is on, it receives and sends out
radio frequency (RF) energy. The handset operates on different frequency ranges
depending on market and employs commonly used modulation techniques:
EU
2412- 2472 MHz
USA/
Canada 2412- 2462 MHz
2008-11-10/ Ver. D
4
User Manual
Ascom i75 VoWiFi Handset
2.4
TD 92319GB
Warranty Notification
Do not disassemble the handset. Disassembling the handset voids the warranty. The
handset consists of no consumer serviceable components. Service should be performed by
Authorized Service centre only.
2.5
Potentially Explosive Atmospheres
Turn the handset off when in an area with a potentially explosive atmosphere. It is rare,
but the telephone or its accessories could generate sparks. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
They include fuelling areas, (such as gas stations), below deck on boats, fuel or chemical
transfer or storage facilities, and areas where the air contains chemicals or particles (such
as grain, dust, or metal powders).
Do not transport or store flammable gas, liquid, or explosives in any compartment of a
vehicle which also contains the telephone and accessories.
In the U.S., vehicles powered by liquid petroleum gas (such as propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Battery march Park, Quince,
Massachusetts 02269, Attention: Publication Sales Division.
2.6
Regulatory Compliance Statements (EU/EFTA only)
This equipment is intended to be used in the whole EU & EFTA.
This equipment is in compliance with the essential requirements and other relevant
provisions of R&TTE Directive 1999/51/EC. The Declaration of Conformity may be
consulted at:
http://www.ascom.com/ws/products_ws.htm
The handset is marked with the label
2.7
Regulatory Compliance Statements (USA and Canada only)
FCC ID:
BXZKATY
IC:
3724B-KATY
FCC compliance statements
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
2008-11-10/ Ver. D
5
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Privacy of communications may not be ensured when using this handset.
Exposure to Radio Frequency Signals
This equipment complies with FCC radiation exposure limits set forth in CFR47 Section
2.1093 and Industry Canada Rss102 Issue 2 for an uncontrolled environment. This device
complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value measured when used
at the ear is 0.0036 W/kg. The telephone has also been tested when worn on the body
using belt clip, maximum measured SAR value in this configuration is 0.117 W/kg. This
device must not be co-located or operating in conjunction with any other antenna or
transmitter.
The FCC has granted an equipment authorization for the i75 VoWiFi handset with all
reported SAR levels evaluated as in compliance with the FCC RF emissions guidelines. SAR
information for the i75 VoWiFi handset is on file at FCC and can be found under the
Display Grant section of https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/
GenericSearch.cfm after searching on FCC ID BXZKATY.
Use of non-Ascom approved accessories may violate the FCC and IC guidelines for RF
exposure and should be avoided.
Information to user
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
• Do not use in areas where there are explosive hazards.
• Do not use this handset in environments where there is a degree of ignition of
flammable gases.
Modifications
Changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
IC Requirements for Canada
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la Classe B conforme á la
norme NMB-003 du Canada.
2008-11-10/ Ver. D
6
User Manual
Ascom i75 VoWiFi Handset
3
TD 92319GB
Description of the Handset
3.1
Handset Overview
Figure 1.
Keys and buttons
Visual- and audio parts
4
3
8
9
7
2
10
6
4 G HI
7 PQRS
2 AB C
3 DEF
1
5 J KL
6 MNO
4 G HI
8 TUV
9 W X YZ
7 PQRS
5
0
1
2 AB C
3 DE F
5 J KL
6 MNO
8 TUV
9 W X YZ
0
12
001
1
11
Figure 1. The i75 VoWiFi handset
1
Microphone
2
Display
3
LED
4
Loudspeaker
5
Navigation key
6
Off-hook Key
7
Volume Button
8
Alarm Button
9
Mute Button
10 Soft Keys
11 On/Off and On-hook Key
12 Alpha Numeric Keys
Figure 2.
Case
The case is made of durable PC/ABS plastic.
The i75 Handset has the enclosure protection IP40 and it also fulfils IEC 68-2-32 procedure
1, which makes it drop proof from 1.5 meters onto concrete.
Antenna
The antenna is integrated inside the handset.
2008-11-10/ Ver. D
7
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Display
The display is an illuminated 128 x 64 pixels LCD, covered by anti-reflex treated plastic
glass for maximum readability.
Keypad
The keypad is illuminated, which makes it possible to operate the handset in dark
environments. While not in use, the keypad should be locked to prevent pressing a key
accidentally.
Clip, Hinge-type
The clip on the back of the handset helps you fasten the handset to a belt or similar. It is
also possible to change the clip to a swivel-type or, if no clip is needed, to replace it with a
covering plate.
Battery
The battery is a rechargeable Li-lon battery placed on the back of the handset.
3.2
Keys and Buttons
3.2.1
Navigation key
Figure 3.
(message list)
up
down
(call list)
005
right (menu)
(menu) left
The Navigation key controls the movement of the cursor in the display.
In stand-by mode the Navigation key
is used for entering the Call list, the Navigation
key
for entering the Message list, and the Navigation key
for entering the menu.
In menu mode, the Navigation key (all directions) is used for scrolling, in the submenus the
Navigation key
is used for scrolling through the entries.
Note: These are the default settings for the Navigation key. They can be changed using
the Portable Device Manager.
3.2.2
Off-hook Key
036
Figure 4.
The Off-hook key is used for connecting calls.
2008-11-10/ Ver. D
8
User Manual
Ascom i75 VoWiFi Handset
3.2.3
TD 92319GB
Volume Button
Figure 5.
033
increase
decrease
The Volume button is used for increasing/decreasing the volume. The adjusted volume is
saved in the handset.
3.2.4
Alarm Button
034
Figure 6.
The red Alarm button is used for sending alarms and testing the alarm function (test
alarm). If programmed the handset can automatically dial a predefined telephone number
directly after an alarm is sent.
3.2.5
Mute Button
Figure 7.
The Mute button is used for silencing the audible signals in stand-by mode, silencing the
ring signal at an incoming call, and also to turn off/on the microphone during a call.
3.2.6
Soft Keys
Figure 8.
Soft keys
006
Default setting
Optional Soft keys defined by
the user.
Max. seven characters can be
used for naming a Soft key
Figure 2. Navigation key functions in stand-by mode (default).
The three Soft keys are located just beneath the display and the function of each Soft key
is indicated by text in the display just above the keys.
In stand-by mode the Soft keys can be used for specific functions defined by the user of
the handset. The function can be to dial a specific telephone number, sending data, a
short-cut to the Menu, or sending a message.
When navigating in menu mode the Soft keys are used for menu choices.
Note: The Soft key Menu is a default setting but all Soft key settings can be changed by
the user or the system administrator.
2008-11-10/ Ver. D
9
User Manual
Ascom i75 VoWiFi Handset
3.2.7
TD 92319GB
On/Off and On-hook Key
037
Figure 9.
The On/off and On-hook key is used for disconnecting calls and for switching the handset
on and off.
3.2.8
Alpha Numeric Keys
Figure 10.
ABCÅÄÆÀÁÂÃÇ2
.,-?!&@"':;()/\_^1
1
GHIÏÌÎÍ4
PQRSß7
4 GHI
7 PQRS
DEFÈÉÊË3
D EF
2 AB C
3
5 JKL
6 MNO
8 TU V
9 W X YZ
JKL5
MNONÖØÒÓÔÕ6
TUVÜÙÚÛ8
WXYZÝ9
Switch between upper
and lower case.
Add pause “P” in
phone numbers.
Space % $ £ ± + =
¿<># ½µ§°¦ 0
Switch between text
and number input mode.
Hold
007
0
In some applications you have the possibility to write letters as well as numbers, which is
indicated by the ABC icon. Pressing the numerical keys will now give you access to the
alphabet plus some special characters according to the picture.
In Stand-by Mode
In stand-by mode short presses on the keys enter the digits, and the characters * and #.
A long press on a key “0” - “9” activates the programmed Hot key function.
In Text Input Mode
In text input mode a press on a key displays the first available character on that specific
key. Press the key repeatedly to view the characters following the first. The marked
character is selected after a time out or when another key is pressed. Press the *-key to
switch between upper case and lower case. Press and hold a key to enter a number in text
input mode, or press repeatedly until the number is shown.
Press and hold the #-key in order to switch between text and number input mode.
In Dialling mode
If a pause is required in a phone number, it is added by making a long press on the *-key.
The pause is indicated with a “P” in the number.
2008-11-10/ Ver. D
10
User Manual
Ascom i75 VoWiFi Handset
3.2.9
TD 92319GB
Hot Keys
Any key “0”–“9” can be set to a Hot key. A Hot key can be programmed to give access to
frequently used functions such as dialling a specific handset number, sending data, a
short-cut to the menu, or sending a message. Note that the possibility to define a Hot key
can be locked by the system administrator.
3.3
Icons and Text in the Display
The icons and text in the display indicate functions and settings to which you have access.
The display normally shows date and time, the owner ID and telephone number. The
owner ID can manually be set by the user.
Figure 11.
} Icons
Menu
Assist
10:36am } Time and date
23654 } User identity
Alarm icons and information of
Silent
} current mode, for example “Silent”
Doctor
the function of the Soft keys
} Shows
(user defined in stand-by mode)
004
Apr 30
Elisabeth
Figure 3. Example of a display configuration in stand-by mode.
In stand-by mode the upper row is used for icons. Three rows are used for information.
The first row shows the date and time and the second row is used for user information.
The user information in stand-by mode can be set by the user. The third information row is
used for showing the alarm icons and status of the handset. Examples of status
information are; muted, in charger etc. When there is no status to show the row is empty.
The bottom row (under the line) is the Soft key field. In stand-by mode it shows the user
defined names of the three Soft keys beneath the display. In menu mode where the Soft
keys are used for different choices, it gives you the function of each Soft key. Examples of
functions are; Select, Back, Option, Save etc.
The “Off-hook” icon indicates that your handset is off-hook.
The “Audio signals” off icon is shown when all alert signals,
including ring signal, message tone, key beep etc. are turned off.
High priority messages will however override this setting.
The “Signal strength” icon is always shown in the display in standby mode. The level indicators decreases when the signal strength
becomes weaker.
The “Battery” icon is always shown in the display in stand-by mode.
When the level is low it is time to charge the battery.
The “Loudspeaking on” icon is shown when it is possible to use the
loudspeaking function.
The “Loudspeaking off” icon is shown when the loudspeaker is
activated.
2008-11-10/ Ver. D
11
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
The “New voice mail” icon appears when a new voice mail exists.
The symbol will remain until all voice mails has been listened to and/
or removed. (Note: This is dependent on voice mail system.)
The “Key lock” icon indicates when your keypad is locked.
The “Padlock” icon indicates that the IP handset has been locked,
and has to be unlocked with a code before it can be used.
The “Headset” icon indicates that a headset is connected to the
handset.
The “No-movement” alarm on icon indicates that the nomovement alarm is activated.
The “Man-down alarm on” icon indicates that the man-down alarm
is activated.
“ABC” indicates that you can type upper case letters and numbers
in text input mode.
“abc” indicates that you can type lower case letters and numbers in
text input mode.
“123” indicates that you can type numbers in text input mode.
The “Incoming call” icon is added in front of incoming calls in the
call list.
The “Outgoing call” icon is added in front of outgoing calls in the
call list.
The “Missed call” icon is added in front of unanswered calls in the
call list
The “Diverted” icon is added in front of the number that the calls
are diverted to.
The “Unread message” icon is added in front of not read messages
in the message list.
The “Read message” icon is added in front of read messages in the
message list.
A “Message continue” icon is shown when the message text
continues above or below the current screen.
The “Interactive message” icon is added in front of not read
interactive messages in the message list.
2008-11-10/ Ver. D
12
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
The “Read interactive message” icon is added in front of read
interactive messages in the message list.
The “Action required” icon is added in front of messages where an
action is required.
The “New message” icon appears when a new message is received.
The number on the right side of the icon shows the total number of
unread messages. The symbol will remain until the message is
marked as read.
The “Add contact” icon appears on a Soft key when a phone
number is marked in the call list. It indicates that it is possible to add
the phone number to the local phonebook.
The “Get contact from phonebook” icon is visible when it is
possible to get a phone number from the local phonebook, for
example to add it to a function.
Menu Icons:
Icons displayed in Menu mode
Under the icon “Contacts” in the menu mode, you can find the
local and central phone books. See 15.1 Contacts on page 39.
Under the icon “Messages” in the menu mode, you can find the
message list and the menu entry for sending messages.
See 15.2 Messages on page 41.
Under the icon “Call list” in the menu mode, you can find the call
list. See 15.3 Call List on page 43.
Under the icon “Services” in the menu mode, you can select, add,
delete, or change a service function. See 15.4 Services on page 43.
Under the icon “Settings” in the menu mode, you do your handset
settings. See 15.5 Settings on page 45.
Under the icon “Profiles” in the menu mode, you can select a
profile and edit profiles. See 15.6 Profiles on page 51.
3.4
Handset Memory
The handset memory contains all personal settings such as phonebook, identity, alert
signal and your defined functions of the Soft keys and Hot keys. All personal settings are
downloaded to the memory when the user logs into the WLAN network. In addition, the
memory holds up to two versions of the firmware.
2008-11-10/ Ver. D
13
User Manual
Ascom i75 VoWiFi Handset
4
TD 92319GB
Accessories
4.1
Belt Clip, Swivel-type
The ordinary belt clip can be replaced with a special swivel-type belt clip adapted to firmly
place your handset onto your belt.
4.2
Leather Casing
The leather casing is especially designed for the handset. The casing comes with a swiveltype belt clip and the handset is fully operational while placed in the casing.
4.3
Headset
A headset is recommended if you frequently use the phone, and/or want to have both
hands free. The handset has a special headset connector that is waterproof. The headset
comes in three versions; with microphone integrated in the cable, with microphone on a
boom, and with hearing protection (Peltor). An adapter, that makes it possible to connect
other standard types of Peltor headsets, is also available.
4.4
Security String
The security string is 800 mm long. Fasten one end to the hinge-type belt clip and the
other end to, for example, your pocket.
4.5
USB Programming Device
Similar to the Desktop charger in design, the USB programming device is used to connect
your handset to a computer in order to upgrade the firmware and edit parameters.
2008-11-10/ Ver. D
14
User Manual
Ascom i75 VoWiFi Handset
5
TD 92319GB
Chargers
5.1
Desktop Charger
Figure 12.
1
4G
7P
2 ABC
HI
3 DEF
5 JK
QR
S
L
8 TU
6 MNO
9 W X YZ
002
0
V
Figure 4. i75 in Desktop Charger.
The Desktop Charger is used for charging your handset, for example at your desk. The
tilted design facilitates the use of handsfree operation, for example in loudspeaking mode.
The charger is delivered with a plug-in power supply and is connected into a wall socket.
5.2
Wall Mounted Charging Racks
003
Figure 13.
Figure 5. Example; two charging racks for handsets and one for spare batteries.
Wall mounted charging racks is used for charging handsets and spare batteries. The
charging racks and its power supply are a modular system which enables a number of
installation configurations. Each power supply can support three charging racks with four
positions for handsets, or eight positions for batteries, in each rack (see the Data Sheet for
Charging Rack).
As the handset cannot distinguish between a Desktop Charger and Charging Rack, it is
recommended that the alert signal is silenced when placed in a rack. It can be set in the
“In charger” profile, see 15.6.2 Change Profile Settings on page 52.
2008-11-10/ Ver. D
15
User Manual
Ascom i75 VoWiFi Handset
6
TD 92319GB
Navigate the Menu
The choices in the main menu are displayed graphically with symbols, while the
alternatives in the submenus are displayed as a list.
Figure 14.
Text in the bottom row
of the display explains
the function of each Soft key.
Navigation key
008
Soft keys
Figure 6. The main menu and the keys used for navigating.
6.1
Enter/Exit the Menu Mode
The three Soft keys located just beneath the display are used for choices in the menu.The
bottom row in the display is the Soft key field and the text gives you the function of each
Soft key. Examples of functions are; Select, Back, Exit, Cancel, Save, Delete, Options, Yes,
No etc.
1
Enter the menu by pressing the “Menu” Soft key, or the Navigation key
2
Use the Navigation key to choose icon and press “Select” to open its corresponding
submenu; a heading is shown and the first alternative is marked.
Use
“Select”.
or
.
to step through the alternatives, and select an alternative by pressing
Figure 15.
Contacts
Select
Search
Back
009
Local phonebook
Central phonebook
Figure 7. The Contacts submenu.
When you are in the Menu mode and have entered a submenu, a press on “Back”
takes you back one step.
3
2008-11-10/ Ver. D
Return to stand-by mode by pressing and holding the “Back” Soft key or by a press
on the
button. You can also step back to stand-by mode by short presses on the
“Back/Exit” Soft key.
16
User Manual
Ascom i75 VoWiFi Handset
7
TD 92319GB
Menu Tree Structure
7.1
Contacts
Figure 16.
Details
Entry 1
Entry 2
(Name: ... Number: ...)
Add, Delete, Edit,
Search, Delete all,
Send Msg
Options
Entry 100
• Central phonebook
Details
Entry X
(Name: ... Number: ...)
Search, Add to
phonebook,
Send Msg,
Clear result
Options
7.2
010
• Local phonebook
Messages
Figure 17.
• Message list
Message 1
Message 2
Message (time/date)
Message 20
• Voice mail (Listen)
7.3
Message address: ...... (enter manually, or get it
from the
)
011
• Send message
Message text: ......
Call List
Figure 18.
(Add to phonebook)
Options
• Call 20 (date/time)
7.4
Edit befor call, Add to phonebook,
Call, Send msg, Delete, Delete all
012
• Call 1 (date/time)
• Call 2 (date/time)
Services
Figure 19.
• Service 1
• Service 2
Select
Options
Change
Delete
Add service
Name: .....
Function:
1
1
2008-11-10/ Ver. D
Data send
Data with prefix
Phone call
Send message
Presence
PTT
013
• Service 10
17
User Manual
Ascom i75 VoWiFi Handset
7.5
TD 92319GB
Settings
Figure 20.
Ring Volume:
• Alert signals
Silent......................level 5
Vibrator (on/off)
Key beep (on/off)
• Audio volumes
• Alarm settings
• Soft key
• Hot key
• General
Beep
Low
Medium
High
Mixed
Internal call:
External call:
Callback:
Ring signals
Speaker volume:
Handsfree volume:
Headset volume:
Level 1..........................................10
No-movement (on/off)
Man-down (on/off)
Left:
Middle:
Right:
Name: .....
Function:
0,1,2....9
Data send
Data with prefix
Phone call
Short-cut
Send message
Change profile
Presence *
PTT
Not used
Language
(English, etc)
Text size
Small
Medium
Phone lock
Lock phone
Set lock code
Time & Date
Time format
12/24 hour
Date format
yyyy-mm-dd
yymmdd
dd-mm-yyyy
mm/dd/yyyy
dd/mm/yyyy
dd.mm.yyyy
Month dd
Auto key lock (on/off)
Quick answer (on/off)
New message rotated (on/off)
Owner ID
Display contrast
Local phonebook
Central phonebook
Message list
Absent
No-movement
Man-down
Edit alarm data
Menu
Call list
Services
RSSI
Network statistics
Call diversions
Presence
Level 1..................................................15
• System
• Presence**
Select system
System A, B,.....D
Information
ESSID, IP and MAC addresses,
SW version, Licences
Activity 1
Activity 2
Activity 3
** The option is only visible if a Presence Management system
is connected to the VoWiFi System
2008-11-10/ Ver. D
014
* An activity list is only visible if a Presence Management system
is connected to the VoWiFi System
18
User Manual
Ascom i75 VoWiFi Handset
7.6
TD 92319GB
Profiles
Figure 21.
Select
Name:........
• Normal
Options
• Profile 2
Edit
Delete*
Add new profile
Ring signals
(Silent, level 1,2..5, )
Internal call:
External call:
Callback:
• Profile 3
Beep
Low
Medium
High
Mixed
Vibrator (on/off)
Key beep (on/off)
• Profile 4
Alarm settings
No-movement (on/off)
Man down (on/off)
Absent (on/off)
• Profile 9
Answer
Soft key**
Ordinary
Auto
Loud
Auto loud
Left (Name/Function)
Middle
Right
Call Diversions
All calls
On busy
No answer
Change
Set
Divert
to No.: ....
* Not applicable for the “Normal” and “In charger” profiles
** See Soft key settings in the “Settings” submenu
7.7
015
• In charger
Ring Volume
Customize the Menu Tree
The menu tree can be customized by hiding some of the available functions. Which
functions that should be hidden are determined by settings in the handset memory. The
following functions can be hidden.
Function
Description
Deletion of messages:
The options delete and delete all are hidden.
Administration of Local phonebook: It is not possible to add new entries, or edit and
delete existing entries.
Editing profiles:
The settings for the profiles cannot be altered.
Changing profiles:
The option select is hidden, i.e. it is not possible to
change profiles from the menu.
Administration of Services:
It is not possible to add new services, or edit and
delete existing services.
Changing Alert Signals:
The Alert Signals alternative in the menu is hidden.
Changing Alarm Settings:
The Alarm Settings alternative in the menu is hidden.
2008-11-10/ Ver. D
19
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Administration of Soft keys:
The Soft key alternative in the menu is hidden.
Administration of Hot keys:
The Hot key alternative in the menu is hidden.
Editing Hot keys:
The option edit is hidden. It is possible to see the
settings for the Hot keys.
Changing General Settings:
The General Settings alternative in the menu is
hidden.
Handling Phone Lock:
The Phone lock alternative in the menu is hidden.
1
Selecting System
View
Information1
Central Phonebook address
1If
The Select system alternative in the menu is hidden.
The Information alternative in the menu is hidden.
When an address to the central phonebook is
specified, the alternative Central Phonebook will
appear in the Phonebook menu and the short-cuts
list. At delivery the address is set to 999999.
all these alternatives are hidden the System alternative in the menu will be hidden.
Each profile in the menu can be hidden individually. This makes it possible to remove
profiles that are not used from the menu. Note that it is still possible to change to the
hidden profiles with help of Soft keys and Hot keys. See 15.5.8 Edit a Soft key on page 47,
and 15.5.9 Edit a Hot key on page 48, for more information.
7.8
In Call Menu
The right soft key can be configured and used when a call is connected, as a short-cut to
different functions. These settings are configured by the system administrator and cannot
be set manually in the handset. Refer to Configuration Manual, Ascom i75 VoWiFi
Handset, TD 92431GB.
2008-11-10/ Ver. D
20
User Manual
Ascom i75 VoWiFi Handset
8
TD 92319GB
Basic Operation
8.1
Switch the Handset On/Off
On: Press and hold
until the handset begins to start-up.
Off: Press and hold
until the Shut down view opens. Mark “Switch off” and press
“Select”. Switch off is displayed until the handset switches off.
8.2
Log a Shared Phone On/Off
The feature shared phone allows more than one user to use a handset. All parameters and
settings that are set in the PDM are loaded to the handset upon logon. Parameters that
are changed in the handset by a logged in user, are stored in the PDM. The message and
call lists are deleted when a new user logs on to the handset.
The handsets are configured to be shared using the PDM. When a handset is configured
to be a shared phone it can be used by any shared phone user in the system. The user
profile must have the “personal phone” parameter disabled. If the user is configured as
personal (i.e. not shared) the handset will become a personal phone upon first log on.
Log on to the handset:
1
Turn on the handset.
2
Enter the user name.
3
Enter the password, navigate using the
4
Press “Log on”.
keys.
Log off the handset:
1
Long press on-hook.
2
Select log off or switch off.
If the handset does not find the WLAN upon start-up, a “No System” screen is shown. If
the handset does not receive an IP address from the system a “No Access” screen is
shown.
8.3
Turn Audible Signals On/Off
In stand-by mode a long press on the Mute button changes between audible signals on/
off and the Audio signal off icon appears/disappears. The icon indicates a completely
silenced handset. Only highest priority messages will override this silent mode.
8.4
Lock/Unlock the Keypad
Press *-key and then press “Lock” to lock the keypad. The Locked keypad icon indicates a
locked keypad. Press *-key and then press ”Unlock” to unlock the keypad.
The keypad can also be locked automatically, see 15.5.15 Turn On/Off Automatic Keypad
Lock on page 49 for more information.
Note: If a phone lock code has been set, the keypad will not be locked; instead the entire
handset will be locked, requiring you to enter the lock code to unlock it. See 8.5 Lock/
Unlock the Handset on page 22.
2008-11-10/ Ver. D
21
User Manual
Ascom i75 VoWiFi Handset
8.5
TD 92319GB
Lock/Unlock the Handset
You can protect your IP handset from being used by others by locking it automatically
when placed in a charger or switched off. The handset can only be unlocked with a 1 to 4
digit code. When the handset is locked, it is still possible to send all types of alarms.
The code is set in the handset’s memory and can be changed from the handset, see
15.5.13 Change the Lock Code1 on page 49. The handset can also be locked manually,
see 15.5.12 Lock the Handset Manually on page 49.
2008-11-10/ Ver. D
22
User Manual
Ascom i75 VoWiFi Handset
9
TD 92319GB
Calling
Note: The headset answering button is active during a call, or when the handset is
ringing. It can also be used to get the line when pre-dialling. Pre-dialling is explained in
section 9.3.1 below.
9.1
Open the Call List
The twenty last received/dialled telephone numbers are stored in a call list.
1
Press
to open the list. The list can be opened from the menu as well, which is
described in 15.3 Call List on page 43.
If the clock and date function is set, you will see the time for the call.
9.2
Incoming Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, give you notice
of a call. Ring signal and vibrator can be disabled. The calling party’s phone number and/or
name is shown. The name will be shown if the calling party’s phone number is stored in
the local or central phonebook. Press
to answer the call. When a headset is connected
to the handset, the answering button on the headset can be used to answer the call.
Other answering methods can also be set in the Profiles settings. The answering methods
are Ordinary, Auto, Loud, and Auto loud. See 15.6 Profiles on page 51 for more
information.
When “Quick Answer” is enabled, an incoming call to a handset placed in the Desktop
Charger will be answered automatically when the handset is lifted out of the charger.
Quick Answer is enabled/disabled in the Settings menu; see 15.5.16 Enable/Disable Quick
Answer on page 50.
9.2.1
Turn Off Alert Signals at an Incoming Call
Press the Mute button before answering the call. All alert signals, including the vibrator,
will become silent for that specific call.
9.2.2
End a Call
Press . When a headset is connected to the handset, the button on the headset can be
used to end the call. All connected calls are ended. The total call time is shown in the
display.
9.3
Outgoing Call
9.3.1
Pre-dial
Enter the number and press
to get the line. The number is shown on the display while
dialling. If needed, you can press “Cancel” to return to the stand-by mode. By using
it is possible to step through a number and add/delete digits.
If a pause is required in the number, it is added by making a long press on the *-key. The
pause is indicated with a “P” in the number.
2008-11-10/ Ver. D
23
User Manual
Ascom i75 VoWiFi Handset
9.3.2
Post-dial1
Press
9.3.3
TD 92319GB
to get the line and enter the number.
Dial Using a Pre-programmed Hot key or Soft key
A Hot key or Soft key can be programmed with a telephone number. Press the preprogrammed Hot key or Soft key. The call will automatically be connected.
9.3.4
Dial a Number from the Call list
Enter the call list with
, or from the menu. Select a number and press
.
The number in the call list can be edited before the call is started. Press “Options”, then
select “Edit before call”, press “Select”, make the changes and press .
9.3.5
Dial a Number from a Message
You can dial a number included in a received message by pressing . The first number
with three or more digits in the message is dialled. If the message is stored in the message
list, open the list by pressing
. Select the message and press .
9.3.6
Dial a Number from the Local Phonebook
Press the “Menu” Soft key and select “Contacts”. Select “Local Phonebook”. A name list
is shown. Select the desired entry. Press
to make the call.
9.3.7
Dial a Number from the Central Phonebook
Press the “Menu” Soft key and mark the Contacts icon. Mark “Central Phonebook” and
press “Search”; Find:_ is shown. Enter the first characters in the name and press “Search”.
A list of matching names will be displayed. You can step to the next name in alphabetic
order by pressing
. Select desired name in the list and press
to make the call.
9.4
During a Call
9.4.1
Start a New Call during Conversation
Press “Options” during the call, and mark “New call”. Dial the number and press .
Switch between the connected calls by pressing “Options” and selecting “switch”.
9.4.2
Transfer/Retrieve a Call
During the call, dial the number to the person you want to transfer the call to, and press
.
In case the person you are trying to transfer the call to is not answering, you can take back
the call by pressing
and then “Options”. Mark “Retrieve:........” and press “Select”.
9.4.3
“Blind” Transfer
Press “Options” during the call, mark “Transfer to new call” and press “Select”. Dial the
number to the person you want to transfer the call to. Press
to transfer the call. In this
case the call cannot be retrieved.
1.Only applicable with the H.323 protocol
2008-11-10/ Ver. D
24
User Manual
Ascom i75 VoWiFi Handset
9.4.4
TD 92319GB
Put a Call on Hold/Retrieve the Call
Put a call on hold: press “Options” during the call, mark “Hold: (No.)” and press “Select”.
The call is put on hold and the text On hold (No.) is shown in the display.
To retrieve the call press “Options” once again and mark “Retrieve”. The call is retrieved
and the text disappears from the display.
9.4.5
Turn the Mute Mode On/Off
A press on the Mute button disconnects/connects the microphone. The text Muted is
shown in the display when the microphone is off during a call.
9.4.6
Increase/Decrease the Speaker Volume
Press the upper part of the Volume button to increase the volume, and press the lower
part of the Volume button to decrease the volume.
9.5
Loudspeaking Function
How to activate the loudspeaking function is dependent of the choice of answering
method. An incoming call can be connected with loudspeaking function active by pressing
the middle Soft key. During a call, a press on the middle Soft key activates the
loudspeaking function. Press the middle Soft key again to turn it off.
You can also activate this function by selecting another answering method, see 15.6.4
Choose the Profile’s Answering method on page 52. For the loudspeaking function you
have three choices in the menu:
• Ordinary/Auto. The loudspeaking function is turned on when the middle Soft key is
pressed.
• Loud. A call is connected with the loudspeaking function turned on when
is
pressed.
• Auto loud. An incoming call is automatically connected after 2 signals with the
loudspeaking function turned on. If the call is answered before two signals have
sounded, the loudspeaking function will not be turned on automatically.
2008-11-10/ Ver. D
25
User Manual
Ascom i75 VoWiFi Handset
10
TD 92319GB
Call Diversion1
Either can a Soft key or Hot key be preprogrammed with a short-cut to the
“Call diversion” function, or a profile be defined and used for the purpose. Refer to
15.5.8 Edit a Soft key on page 47, 15.5.9 Edit a Hot key on page 48, or 15.6.5 Set the
Profile to Divert incoming Calls on page 52.
All calls, calls when busy or calls at no answer can be diverted to other phone numbers.
10.1 Preset the Telephone Numbers
1
Press the preprogrammed Soft/Hot key and press “Set”. Divert to number:.. is
displayed.
2
Enter the phone number you want to divert the calls to and press “Save”.
3
Mark the next diversion alternative. Press “Set” and repeat point 2.
10.2 Divert Calls
From the default profile
1
Press the preprogrammed Soft/Hot key or select the predefined profile in the
Profiles list.
2
Choose All calls, On busy, or No answer and press “Change”. If the phone number
has been preset the handset will return to stand-by mode, else continue with the
next step.
(3)
Divert to number:.. is displayed. Enter the phone number you want to divert the
calls to and press “Save”.
By changing to another preset profile
Changing to another profile is described in section 15.6.1.
1.Only applicable with the H.323 protocol
2008-11-10/ Ver. D
26
User Manual
Ascom i75 VoWiFi Handset
11
TD 92319GB
Push-to-Talk Conference Call
Note: The Push-To-Talk function requires a Multi Point Control Unit (MCU), handsets
programmed with PTT settings (from the PDM) and that groups have been created in the
system.
The push-to-talk (PTT) function can be described as a group/conference call. A PTT session
can be triggered from the system, by an alarm or by a user that sends an invitation to a
PTT group from the handset.
Figure 22.
PTT
Select
Cancel
038
Assembly group 1
Assembly group 2
Guards section A
Figure 8. Example of groups in a PTT list
A PTT invitation can either be accepted or rejected by pressing a soft key. All group
members that have accepted the PTT session, can listen to the conversation which by
default starts in loudspeaking mode. If one of the group members wants to get in contact
with the others, he simply presses and holds the Mute button to open the microphone.
More than one handset can press the Mute button and start transmitting at the same
time.
The function must be assigned to a Soft key, a Hot key or a Service. Refer to 15.5.8 Edit a
Soft key on page 47, 15.5.9 Edit a Hot key on page 48, or 15.4.3 Edit a Service on page
44.
11.1 Send an Invitation to a PTT Group
1
Press the preprogrammed Soft/Hot key or select the Service. The invitation is sent
immediately to the preprogrammed PTT group.
11.2 Accept a PTT Conference Call
1
Press “Accept” to be connected to the PTT session. Default the handset will start in
inverted mute and loud-speaking mode, but it can be configured differently in the
received PTT message.
2
Press and hold the Mute button to open the microphone for transmitting. The
microphone is muted again when the Mute button is released.
11.3 Reject a PTT Conference Call
1
2008-11-10/ Ver. D
Press “Decline” to reject the PTT session. The handset will return to the previously
shown screen and the PTT message will be stored in the message list.
27
User Manual
Ascom i75 VoWiFi Handset
12
TD 92319GB
Messaging
12.1 Message List
The twenty last received messages are stored in a message list, if the total number of data
characters does not exceed 20 000.
12.1.1 Display and Scroll between Messages
All received messages are saved in the message list. Open the message list by pressing
,
or from the menu, see page 41. Navigate in the list with
. The selected message is
marked. Only one row per message is displayed.
Figure 23.
Message list
Open
Options
Back
025
Section meeting
Visitor
Room 102
Figure 9. Unread and read ordinary messages
Figure 24.
Message list
Open
Options
Back
029
Section meeting
Visitor
Room 1024 “bed”
Figure 10. Message waiting for an answer
Figure 25.
Message list
Open
Options
Back
028
M4 low level
M5 high level
M1 low level
Figure 11. Unread and read interactive messages
Message indications:
The message is unread
The message is read
The message requires an action
The interactive message is unread
The interactive message is read
2008-11-10/ Ver. D
28
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
12.1.2 Read Stored Messages
1
Open the message as described in 12.1.1. Navigate in the list with
selected message is marked.
. The
2
Press “Open” to see the whole message. The identity of the sending handset and
time and date when the message was received, is shown.
Figure 26.
Section meeting
Reply
Delete
Close
026
>9341
2007-04-26 2:05pm
Figure 12. Opened message
A message that has been sent with a request for answer is indicated and viewed the same
way as other messages, except for messages that have not been acknowledged.
Non-acknowledged message
Figure 27.
Room 1024 “bed”
Accept
Reject
031
>9001
2007-03-22 1:24pm
-Action required
Figure 13. Opened non-acknowledged message
A non-acknowledged messages is indicated with an exclamation point in the list and
when opened the text “Action required” is added to the message. Use the Soft keys to do
a positive or negative acknowledgement.
Acknowledged message
Figure 28.
Delete
Close
027
Room 1024 “bed”
>9001
2007-03-22 1:24pm
-Rejected
2007-03-22 1:26pm
Figure 14. Opened acknowledged message
An acknowledged message is indicated by the text Accepted or Rejected and the time it
was acknowledged.
2008-11-10/ Ver. D
29
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Interactive message
Figure 29.
Confernce this evening!
Will you be there?
“Fred Smith” <Fred.Smith
@company.com
2007-04-20 5:44pm
Options
Delete
Close
Options
Select
Back
032
Reply
Figure 15. Example of an interactive message
An interactive message has one ore more options. A very simple interactive message can
look like the one in figure 15. The options depends on the configuration in the client
application, see 12.5 Interactive Messaging on page 33.
12.1.3 Message Queuing and Message Priority
If several messages are received during a short period of time it is possible to specify at
which rate the messages will be shown on the display. If a minimum time for messages to
be displayed is set, each message will be shown without being interrupted by another
message, except if the new message is of higher priority. Messages that are not shown yet
are placed in a queue and the priority and time of reception determine the position in the
queue. There are 9 levels of the priority. 1 is highest priority and 9 is lowest priority. If
several of the messages have the same priority the message that was received first is
shown first. If no minimum time is set (the parameter is set to 0) the priority order is
disabled. Refer to the Configuration Manual i75 VoWiFi Handset. The total number of
messages in the queue and the message list can not exceed the total number of characters
stored, see 12.1 Message List on page 28.
If a new message with a higher priority is received while another message is read the new
message will replace the old message in the display. The old message will be placed in the
2008-11-10/ Ver. D
30
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
queue. If a new message with equal or lower priority is received while another message is
read the new message will be placed in the queue.
Figure 30.
New messages
Prio 7
14:04 Prio 4
14:03
Prio 1
14:02 Prio 9
14:01
Prio 9
14:01
Prio 8
13:59
Me
ss
Prio 7
14:04 Prio 4
14:03
Prio 2
13:59
Current Mess
ag
Prio 2
13:59
Current Mess
ue
Prio 1
14:02
042
eq
ue
Prio 4
13:58
Figure 16. Figure of how the queue and priority works
Messages in the queue will be shown automatically when the minimum time has passed
for the previous displayed message or the message is closed or deleted. Queued messages
will always be shown instead of the idle-screen until the queue is empty.
Unread message indication while displaying a message
An envelope icon, see 3.3 Icons and Text in the Display on page 11, will be flashing in the
display if there are unread messages in the queue.
2008-11-10/ Ver. D
31
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
12.2 Basic Message Handling
12.2.1 Receive a Message
A flashing LED, accompanied by a message tone and/or a vibrating handset, gives you
notice of a message. The message tone can be silenced by a press on the Mute button. If
the handset is set in silent mode, the message tone will break trough only if the message
is urgent.
The message will be displayed for a preset period of time. If “Close” is pressed, or if a
“Reply” is sent, the message will be marked as read.
The text size can be changed, see 15.5.11 Change Text Size in Messages on page 49, and
the message can also be displayed upside down, see 15.5.17 Display New Messages 180º
Rotated (upside down) on page 50.
12.2.2 Receive a Message during a Call
During a connected call a new message is indicated by a beep. The characteristics of the
beep is the same as the message tone.
The new message is displayed without disconnecting the call.
12.2.3 Receive a Message with Request for Answer
A message with request for answer is indicated and viewed the same way as other
messages, see 12.2.1 Receive a Message. Use the Soft keys to do a positive or negative
acknowledgement.
Accept/Reject the message
Figure 31.
Room 1024 “bed”
Accept
Reject
027
>9001
2007-03-22 1:24pm
Figure 17. Message with request for answer
1
Press “Accept” or “Reject”.
Note: The option “Delete” is not available for a message with request for answer; a
message that has not been acknowledged can only be deleted from within the message
list.
12.2.4 Delete a Message
Delete a received Message
Press the “Delete” when the message is displayed or marked in the Message list. The
question Delete message? is shown; press “Yes”.
2008-11-10/ Ver. D
32
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Delete a Message stored in the Message list
Open the message list by pressing
, or from the menu, see 15.2 Messages on page 41.
Navigate in the list with
. The selected message is marked. Press “Delete”. The
question Delete message? is shown; press “Yes”.
12.3 Messaging between Handsets
Messaging between handsets is a system dependent function.
Messages from one handset to another is done from the menu entry “Messages”. It is also
possible to assign a Soft/Hot key or Service to the “Send message” function.
A Soft/Hot key or a Service can be programmed to send messages either to a predefined
address or to any address in the system. If not predefined, the handset will ask for the
destination address.
An incoming message is immediately displayed and the identity of the sending handset is
shown on a separate row.
12.3.1 Send a Message to another Handset
Press the Menu Soft key, mark the Messages icon and press “Select”. Mark “Send
message” and press “Select”. Enter the destination address or fetch it from the Local
phonebook by pressing the Soft key with the Contacts icon; press “Select”. If the address
is not entered, an error message will be displayed. Enter text and press “Send”. Sending
will be displayed as a confirmation of the transfer.
12.4 Send a Message to a predefined Destination Address
Refer to 15.5.9 Edit a Hot key on page 48, 15.5.8 Edit a Soft key on page 47, or 15.4.2
Create a new Service on page 44, how to predefine the destination addresses.
Press the Soft key, or press and hold the Hot key, or select the Service. Enter text and press
“Send”. Sending will be displayed as a confirmation of the transfer.
12.5 Interactive Messaging
Interactive Messaging (IM) is a function that extends basic messaging. It makes it possible
for a user to access information from a client application in the system, from the handset.
An example can be a customized application that can be accessed from the handset. Data
sent from the handset can be used to initiate the application to send the interactive
message, see 12.7 Send Data from the Handset on page 34. A list of actions can be
included in the message sent from the application to the handset. The user can then select
one action from the list. The action can be sending a message back to the application,
and/or dialling a specific number etc.
An IM is indicated and viewed the same way as an ordinary message, see 12.2.1, but the
Interactive message icon is added in front of the message. It is saved along with other
messages in the message list.
Interactive Messaging is a system dependent function.
2008-11-10/ Ver. D
33
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
12.5.1 Interactive Messages with Function Keys
If there are function keys specified in an Interactive Message, they will be mapped to the
Soft keys and the alphanumeric keys. Function Key ID (A) will be mapped to the left Soft
key, Function Key ID (B) will be mapped to the middle Soft key, and Function Key ID (C) will
be mapped to the right Soft key. Function key IDs (0)–(9) will be mapped to the
corresponding alphanumeric keys.
12.5.2 Interactive Messages without Function Keys
Open an Interactive Message (IM) the same way as an ordinary message. If the IM gives
you several options, mark the one you want and press “Select”. If the selected option
requests input, enter the information needed and press “Select”.
A long press on the “#- key” will change to digit input mode to facilitate entering
numbers.
12.5.3 Multilayer Interactive Messaging
Interactive messages can have multiple layers. A multilayer message have different options
defined for the soft keys. When a soft key is pressed and an option is selected new options
are defined for the soft keys depending on the previous selection.
It is the soft key options that are changed, the text message is unchanged.
12.6 Voice Mail
12.6.1 Receive a Voice Mail
A ring signal and the New voice mail icon in the display indicate that a new voice mail has
arrived. You can listen to voice mail by selecting the “Voice mail” entry in the “Messages”
menu.
12.7 Send Data from the Handset
12.7.1 Data Send
It is possible to send user entered data from the handset by pressing a pre-programmed
Hot key or Soft key, or selecting a Service. “Data send” can be used for opening a door,
starting/stopping a machine etc. The data can either be predefined, or entered after the
Hot key/Soft key is pressed or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see 15.5.8
Edit a Soft key on page 47 or 15.4.3 Edit a Service on page 44.
12.7.2 Send Data with a Prefix
Data with a prefix is sent from the handset by pressing a pre-programmed Hot key or Soft
key or selecting a Service. Data with prefix can be used to send information to an
application in the system. The prefix is predefined by the user when programming the Hot/
Soft key or Service, see 15.5.8 Edit a Soft key on page 47 or 15.4.3 Edit a Service on page
44. The data is entered after the Hot key/Soft key is pressed or Service is selected.
2008-11-10/ Ver. D
34
User Manual
Ascom i75 VoWiFi Handset
13
TD 92319GB
Presence Management
Note: The presence option is only available when the handset has logged into and
received an activity list from a Presence Management system, and received time and date
from an NTP server.
The activity list and the names of the activities depends on the configuration in the
Presence Management system.
The function “Presence” is added to Settings when the above criteria are fulfilled, but it
can also be assigned to a Soft key/Hot key or a Service. Refer to 15.5.8 Edit a Soft key on
page 47, 15.5.9 Edit a Hot key on page 48, or 15.4.3 Edit a Service on page 44.
13.1 Select Presence Activity
1
Press the “Menu” Soft key, mark the Settings icon and select “Presence”, or press
the preprogrammed Soft/Hot key or select the Service.
2
Mark the cause for not being present in the Presence list by using the Navigation
key and press “Select”.
Figure 32.
Presence
Select
Cancel
039
Meeting
On holiday
Busy
Figure 18. Example of an activity list
(3)
Enter the time or the date the selected activity will end.
Figure 33.
Meeting
Ok
Clear
Cancel
040
Return Time
Hour:
Minutes:
Figure 19. Settings when the activity will end the same day
Figure 34.
On Holiday
Ok
Clear
Cancel
041
Return date
Month:
Day:
Figure 20. Settings when the activity will end another day
4
2008-11-10/ Ver. D
Press “Ok”
35
User Manual
Ascom i75 VoWiFi Handset
14
TD 92319GB
Alarm Operation
14.1 Acoustic Localisation Signal
A parameter in the handset determines whether or not an Acoustic Localisation Signal
(ALS) should sound after an alarm. The ALS is silenced by pressing the Mute button.
14.2 Push-button Alarm
Press the red alarm button twice within two seconds to activate the alarm. An information
text, by default Personal Alarm1, is displayed. The alarm is sent to the alarm central that
distributes it further. After that the handset returns to stand-by mode. Note that you can
always trigger the alarm when you are speaking, editing your settings, or while the phone
is locked.
14.3 Test Alarm
Press and hold the red alarm button until the information text is displayed, default Test
Alarm1.
14.4 No-movement Alarm
Note: The No-movement alarm requires that the licence option is made available in the
handset. For information on how to add a licence, refer to Configuration Manual, Ascom
i75 VoWiFi Handset TD 92431GB.
You can activate/deactivate the alarm function in the menu, see 15.5.6 Deactivate/
Activate No-movement alarm on page 46, or by programming a Soft/Hot key as a shortcut to the function, see 15.5.8 Edit a Soft key on page 47. The Soft/Hot key changes the
state of the alarm, i.e. if it is deactivated it will be activated and vice verse. Press the Soft
key, or press and hold the Hot key, to put the alarm in or out of operation, respectively.
The No-movement alarm on icon on your display is an indication that the No-movement
alarm is in operation.
Send No-movement alarm
The No-movement alarm will go off when you have not moved within a preset period of
time (default 30 seconds). Before the alarm is activated a warning signal sounds and the
No-movement on icon starts to flash. If you do not cancel the alarm by pressing a key, the
alarm is sent and No-movement alarm1 is shown in the display.
Activate No-movement alarm after sending
When a No-movement alarm has been sent, it is made active again by pressing a key or by
moving the handset.
1. The information text can be changed using a parameter in the handset
2008-11-10/ Ver. D
36
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
14.5 Man-down Alarm
Note: The No-movement alarm requires that the licence option is made available in the
handset. For information on how to add a licence, refer to Configuration Manual, Ascom
i75 VoWiFi Handset TD 92431GB.
You can activate/deactivate the alarm function in the menu, see 15.5.7 Deactivate/
Activate Man-down alarm1 on page 46, or by programming a Soft/Hot key as a short-cut
to the function, see 15.5.8 Edit a Soft key on page 47. The Soft/Hot key changes the state
of the alarm, i.e. if it is deactivated it will be activated and vice verse. Press the Soft key, or
press and hold the Hot key, to put the alarm in or out of operation, respectively.
The Man-down alarm on icon on your display is an indication that the Man-down alarm is
in operation.
Send Man-down alarm
The Man-down alarm will go off when the handset is tilted more than 45º for a preset
period of time (default 30 seconds), for example if you fall. Before the alarm is activated a
warning signal sounds and the Man-down alarm on icon starts to flash. If you do not
cancel the alarm by pressing a key, it is sent and Man-down alarm1 is shown in the display.
Activate Man-down alarm after sending
When the man-down alarm has been sent, it is made active again by moving the handset
to upright position or pressing a key.
14.5.1 Delay Time for No-movement and Man-down Alarms Warning Signal
By setting a parameter, the time before the warning for no-movement and man-down
alarms can be delayed for ten minutes, i.e. no-movement and man-down will not be
detected during the time period. When the warning signal sounds, press the Mute button
to delay the time to next warning for up to ten minutes.
14.6 Alarm with Data
Additional data for example a location code, can be sent along with an alarm. The data
must manually be defined and stored by the user via the menu. This is a system dependent
function.
14.7 Automatic Call after an Alarm
The handset can be programmed to call a predefined telephone number directly after an
alarm. Each alarm type in the handset must be programmed with the specific telephone
number. It can be any external or internal telephone number but also a pre-defined group
of handsets.
This is a system dependent function that also require a parameter setting in the IP handset.
Note: An ongoing call will be disconnected, unless it is an alarm call, and an incoming call
will be rejected when the alarm is transmitted. Then the telephone number associated
with the alarm will be dialled.
1.The information text can be changed using a parameter in the handset
2008-11-10/ Ver. D
37
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
14.8 Automatic Alarm after an Emergency Call
By enabling a parameter in the handset an automatic emergency alarm can be triggered
after a call to the emergency number.
Note: The emergency number is a specific number that can be set in the handset, usually
a countrie´s single emergency telephone number that allows a caller to contact the
emergency services for assistance.
The number set as emergency number can be dialled even if the handset is locked.
2008-11-10/ Ver. D
38
User Manual
Ascom i75 VoWiFi Handset
15
TD 92319GB
Menu Operation
Changes made from the menu are by default saved, but a handset parameter determines
if changes are to be saved or not. If this parameter is set to not save, then all changes will
be discarded when the handset is restarted.
15.1 Contacts
1
Enter the menu by pressing the “Menu” Soft key, or the Navigation key
the Contacts icon is marked.
or
2
Press “Select”. The alternatives in Contacts are Local phonebook and Central
phonebook.
;
018
Figure 35.
Figure 21. The Contacts icon is marked.
15.1.1 Find an Entry in the Local Phonebook
1
Mark the Contacts icon and press “Select”; Local phonebook is marked.
2
Press “Search”; Find: will appear.
3
Enter the first letter in the name or the whole name. Press “Search”. The first name
corresponding to your search will appear.
4
Use
to scroll through the entries. Note that the entries sorting order might
change depending on the selected handset language.
Note: The search function is not accessible if the Local phonebook is empty.
15.1.2 View an Entry in the Local Phonebook
1
Mark the Contacts icon and press “Select”.
2
Mark “Local phonebook” and press “Select”. The first entry is marked.
3
Use
4
Press “Details” to view the entry; the name and number will appear.
5
Use
to view the next entry in the list. Press “Back” to step back. Note that
the entries sorting order might change depending on the selected handset
language.
to scroll through the list.
15.1.3 Add an Entry to the Local Phonebook
1
Mark the Contacts icon and press “Select”.
2
Mark “Local phonebook” and press “Select”.
3
Press “Add”; Name:_ and Number:_ will appear. The handset is in text input mode
and the name can now be added.
2008-11-10/ Ver. D
39
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Note: If one or more contacts already have been added, you will have to press “Options”
first, then mark “Add” and press “Select”.
4
Enter the name.
Change between upper and lower case characters by pressing the *- key on the
keypad. Change between character and digit input mode by pressing and holding
the #-key. You can delete the character/digit to the left of the cursor by pressing
“Clear”. Press and hold “Clear” to delete several characters one at a time.
5
Press
and enter the number.
A pause can be added to the number by making a long press on the *-key. The
pause is indicated with a “P” in the number.
By using
and
it is possible to step back and forth in a name/number and add/
delete a character/digit in the middle of it.
6
Press “Save”; Entry saved is shown. The handset will automatically return to the
local phonebook.
15.1.4 Delete an Entry in the Local Phonebook
1
Mark the Contacts icon and press “Select”.
2
Mark the “Local phonebook” and press “Select”. The first entry is marked.
3
Scroll through the list and mark the name you want to delete. Press “Options”; Add
is marked.
4
Scroll through the list and mark “Delete:”. Press “Select”; the question Delete
entry? will appear. Press “Yes” (“No” will take you back to the local phonebook);
Entry deleted is shown. The handset will automatically return to the local
phonebook.
Delete when Viewing or after Searching the Entry
1
View or search for an entry by using the instructions in 15.1.2 View an Entry in the
Local Phonebook on page 39 or 15.1.1 Find an Entry in the Local Phonebook on
page 39.
2
Press “Options” and mark “Delete:”.
3
Press “Select”; the question Delete entry? will appear. Press “Yes” (“No” will take
you back to the local phonebook); Entry deleted is shown. The handset will
automatically return to the local phonebook.
15.1.5 Edit an Entry in the Local Phonebook
1
Find or view the entry using the instructions in 15.1.2 View an Entry in the Local
Phonebook or 15.1.1 Find an Entry in the Local Phonebook.
2
Press “Options”; Add is marked.
3
Scroll through the list and mark “Edit:”. Press “Select”
4
First edit the name. Change between upper and lower case characters by pressing
the *-key on the keypad. Change between character and digit input mode by
pressing and holding the #-key. The middle Soft key is used as a Clear (C) button.
5
Press
6
Press “Ok”; Entry saved is shown. The handset will automatically return to the local
phonebook and the saved entry is marked.
2008-11-10/ Ver. D
to edit the number. It is possible to step through a name/number using
and add/delete a character/digit in the middle of it.
40
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
15.1.6 Find an Entry in the Central Phonebook
1
Mark the Contacts icon and press “Select”.
2
Mark “Central phonebook”. Press “Search”; Find:_ will appear.
3
Enter a name or number.
4
Press “Search”. For more information about how to search in the Central phone
book, see Installation and Operation Manual Phonebook Service, TD 92360GB.
The search result is presented. The handset will remember the search result until it is
overwritten by a new search result or manually cleared from the handset. This
means that the next time the Central phonebook is selected, the latest search result
is opened.
15.1.7 Delete the Central Phonebook Search Result
1
Mark the Contacts icon and press “Select”. The search result is presented.
2
Press “Options”.
3
Mark “Clear result” and press “Select”
4
Press “Yes”. Search result cleared is shown.
15.1.8 Add an Entry from the Search Result to the Local Phonebook
1
Mark the Contacts icon and press “Select”.
2
Mark “Central phonebook” and press “Select”.
3
Search for the entry If no search result exists, see 15.1.6 Find an Entry in the Central
Phonebook.
4
Mark desired entry.
5
Either press “Options”, mark “Add to phonebook: ..” and press “Select”,
or press “Details” and “
6
.”.
Press “Save”. Entry saved is shown.
15.1.9 Send a Message to an Entry in Contacts
1
Select Local phonebook or Central phonebook, see 15.1.1 Find an Entry in the
Local Phonebook or 15.1.6 Find an Entry in the Central Phonebook.
2
Mark desired entry and press “Options”.
3
Mark “Send msg” and press “Select”.
4
Enter message text and press “Send”. Sending.. is shown.
15.2 Messages
1
2008-11-10/ Ver. D
Enter the menu by pressing the Menu Soft key, or the Navigation key
or
.
41
User Manual
Ascom i75 VoWiFi Handset
2
TD 92319GB
Select the Messages icon and press the Soft key “Select” to enter the Messages
submenu.
016
Figure 36.
Figure 22. The Messages icon is marked.
15.2.1 Message List
1
Mark the “Message list” and press “Select”.
Figure 37.
Messages
Select
Back
017
Message list
Send message
Figure 23. Messages is selected and the Message list in the submenu is marked.
All received messages in the Message list are shown. The messages are either
marked as read or unread.
2
Mark the desired message.
3
Press “Open” to view the whole message. The date and time it was received is
shown.
4
Press “Close” to return to the message list.
Send a reply on the message
1
Open the desired message, see 15.2.1 Message List on page 42, and press “Reply”.
2
Enter text and press “Send”.
Delete the message
1
Open the desired message, see 15.2.1 Message List on page 42, and press
“Delete”; the question Delete message? will appear.
2
Press “Yes”. The handset will automatically return to the message list.
Delete all Messages
1
Mark the desired message in the list, see 15.2.1 Message List on page 42, and press
“Options”.
2
Mark “Delete all” and press “Select”; the question Delete all messages? will
appear.
2008-11-10/ Ver. D
42
User Manual
Ascom i75 VoWiFi Handset
3
TD 92319GB
Press “Yes” (“No” will take you back to the Message list); All messages deleted is
shown and after one second you will automatically be back in stand-by mode.
15.3 Call List
1
Enter the menu by pressing the “Menu” Soft key, or the Navigation key
or
.
2
Mark the Call list icon and press “select” (this is the same call list that is reached by
pressing
in stand-by mode).
019
Figure 38.
Figure 24. The Call list icon is marked.
3
In the call list, toggle between name and number by pressing
or
.
15.3.1 Save a Number from the Call List to the Local Phonebook
1
Mark the Call list icon and press “Select”. The first number in the list is marked.
2
Press the Soft key with the “
” icon. The number is added and you only
have to enter the name. Change between upper case and lower case characters by
pressing the *-key on the keypad. Change between character and digit input mode
by pressing and holding the #-key. The middle Soft key is used as a Clear button.
3
Press “Save”; “Entry saved” is shown. The handset will automatically return to the
Call list.
15.3.2 Delete a Number in the Call List
1
Mark the Call list icon and press “Select” (this is the same Call list that is reached by
pressing
in stand-by mode). The first number in the list is marked.
2
Mark the number you want to delete. Press “Options”; Edit before call is marked.
Scroll down to “Delete”; Press “Select”. The handset will automatically return to
the Call list.
15.3.3 Delete All Numbers in the Call List
1
Mark the Call list icon and press “Select” to enter Call list (this is the same Call list
that is reached by pressing
in stand-by mode). The first number in the list is
marked.
2
Press “Options”; Edit before call is marked. Mark “Delete all”. Press “Select”; the
question Delete all numbers? is shown.
3
Press “Yes” (“No” will take you back one step); “All numbers deleted” is shown.
The handset will automatically return to stand-by mode.
15.4 Services
1
2008-11-10/ Ver. D
Enter the menu by pressing the Menu Soft key, or the Navigation key
or
.
43
User Manual
Ascom i75 VoWiFi Handset
2
TD 92319GB
Mark the Services icon. Press “Select”; a list with all created Services is shown.
021
Figure 39.
Figure 25. The Services icon is marked.
15.4.1 Activate a Service
1
Mark the Services icon and press “Select”.
2
Mark the Service you want to activate. Press “Select”; the service will be activated.
• If predefined data is sent, the text Sending... is shown. The handset will
automatically return to the list and the selected service is marked.
• If data with prefix is to be sent; enter the data and press “Send”. The text
Sending... is shown and the handset will automatically return to menu mode.
• If a phone call is to be made the phone number will be dialled.
• If a message is to be sent; enter the message address (may be predefined), press
“Ok”, enter message text and press “Send”. The text Sending... is shown and
the handset will automatically return to menu mode.
15.4.2 Create a new Service
1
Mark the Services icon and press “Select”.
2
Press “Add”; Name:_ will appear. The handset is in text input mode and the name
can now be added.
Note: If services already have been created, you will have to press “Options” first, then
select “Add service” and press “Select”.
3
Enter a name that describes the service you want to add, for example, if you want
this service to open a door, then name it Open door.
4
Press “Save”; the new name is marked and added to the list.
5
Select “Function:Not used”.
6
Press “Select” to enter functions. The functions available are; Data send, Data with
prefix, Phone call, and Send message.
7
Choose the function you want the service to have and press “Select”.
8
Dependant on the function you have chosen, enter data, prefix, phone number, or
message address (if you want a predefined address), and press “Select” to save the
setting. The handset will automatically return to the service and the function is
marked.
15.4.3 Edit a Service
1
Mark the Services icon and press “Select”. A list with all Services is shown.
2
Mark the one you want to edit. Press “Options” and select “Change:”.
3
Press “Select”.
4
Mark “Name:” and press “Edit”. Change the name and press “Save”.
2008-11-10/ Ver. D
44
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
5
Mark Function:” and press “Select”.
6
Choose a function and press “Select”. Enter data, prefix, phone number, or text
message address and text; press “Save”. The handset will automatically return to
the Service and the function is marked.
15.4.4 Delete a Service
1
Mark the Services icon and press “Select”. A list with all Services is shown.
2
Mark the one you want to delete. Press “Options”.
3
Mark “Delete:”; the question “Delete service?” is shown. Press “Yes”; “Service
deleted” is shown for 1 second. The handset will automatically return to the list and
the next Service is marked.
15.5 Settings
1
Enter the menu by pressing the “Menu” Soft key, or the Navigation key
2
Mark the Settings icon and press “Select”.
or
.
022
Figure 40.
Figure 26. The Settings icon is marked.
The alternatives in Settings are; Alert signals, Audio volumes, Alarm settings, Soft key,
Hot key, General, and System.
• In Alert signals you can change your settings for all audible signals and the vibrator.
• In Audio volumes you can change your settings for the speaker volume, the
loudspeaker volume and the headset volume.
• In Alarm settings you can turn No-movement and Man-down alarm on and off.
• In Soft key and Hot key you can assign the Soft/Hot key a function.
• In General you can change the following settings: Language, Text size, Phone lock,
Time & date, Auto key lock, Quick answer, New message rotated, and Owner ID.
• In System you can select system and get information about the handset.
15.5.1 Change the Ring Volume
1
Mark the Settings icon and press “Select”.
2
Mark “Alert signals” and press “Select”.
3
Mark “Ring volume:” and press “Select”. Mark the desired volume level by using
the Navigation key or . You have six available alternatives; Level 1 to 5, or
Silent.
If you want to hear the volume level during the changing, press “Play”. Press
“Stop” to stop the sound.
4
2008-11-10/ Ver. D
Activate your choice by pressing “Select”; the selected volume is shown. The
handset will automatically return to the Alert signals list and the volume is marked.
45
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
15.5.2 Change the Ring Signal
1
Mark the Settings icon and press “Select”.
2
Mark “Alert signals” and press “Select”.
3
Mark “Ring signals” and press “Select”. You can change the ring signal for
Internal call, External call, or Callback.
4
Mark the desired ring signal; press “Change”.
5
Choose the desired signal. Available alternatives are Beep, Low, Medium, High, and
Mixed.
If you want to hear the new signal, press “Play”. Press “Stop” to stop the sound.
6
Activate your choice by pressing “Select”; the selected Ring signal is shown. The
handset will automatically return to the Ring signals list and the changed Ring
signal is marked.
15.5.3 Change the Speaker, Loudspeaker or Headset Volume
1
Mark the Settings icon and press “Select”.
2
Mark “Audio volumes” and press “Select”.
3
Mark “Speaker volume”, “Loudspeaker volume”, or “Headset volume” and press
“Select”.
1
Mark the desired volume level by using the Navigation key
available alternatives; Level 1 to 10.
2
Activate your choice by pressing “Select”; the selected volume is shown.
or
. You have ten
15.5.4 Vibrator On/Off
1
Mark the Settings icon and press “Select”.
2
Mark “Alert signals” and press “Select”.
3
Mark “Vibrator” and press “Change”; the Vibrator checkbox is selected/cleared.
15.5.5 Key Beep On/Off
1
Mark the Settings icon and press “Select”.
2
Mark “Alert signals” and press “Select”.
3
Mark “Key beep” and press “Change”; the Key beep checkbox is selected/cleared.
15.5.6 Deactivate/Activate No-movement alarm1
1
Mark the Settings icon and press “Select”.
2
Mark “Alarm setting” and press “Select”.
3
Mark “No-movement” and press “Change”; the No-movement checkbox is
selected/cleared.
15.5.7 Deactivate/Activate Man-down alarm1
1
Mark the Settings icon and press “Select”.
1.Requires an Alarm License and an i75 Handset equipped with the alarm option. For
information on how to add a licence, and how to activate the alarms in the PDM, refer to
Configuration Manual, Ascom i75 VoWiFi Handset TD 92431GB.
2008-11-10/ Ver. D
46
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
2
Mark “Alarm setting” and press “Select”.
3
Mark “Man-down” and press “Change”; the Man-down checkbox is selected/
cleared.
15.5.8 Edit a Soft key
Figure 41.
Soft key
Change
Back
023
Left:Menu
Middle: Message
Right: Not used
1
Mark the Settings icon and press “Select”.
2
Mark “Soft key” and press “Select”.
3
Mark the Soft key you want to edit and press “Change”. Name: is marked.
4
Press “Edit”.
5
Enter a name of maximum seven characters. Press “Ok”. Changes saved is shown
and the handset automatically returns to the soft key.
6
Mark “Function:”.
7
Press “Change” to enter functions.
2008-11-10/ Ver. D
47
User Manual
Ascom i75 VoWiFi Handset
8
TD 92319GB
Choose the desired function for the Soft key. See table below.
Soft key/Hot key functions:
Data send:
Press “Select”. Enter data if you want it to be predefined, or
leave it out if you want to enter data after pressing the Soft
key, press “Save”.
Data with prefix:
Press “Select”. Enter prefix and press “Save”.
Phone call:
Press “Select”. Enter phone number and press “Save”.
Alternatively, press the Phonebook Soft key and choose a
contact from the Local phonebook and then press “Save”.
Tone sender on will be indicated with a “T” in the number, and
off with “-”. A pause can be added by making a long press on
the *-key. The pause is indicated with a “P” in the number.
Short-cut:
Press “Select”. Assign the short-cut; Local phonebook, Central
phonebook, Message list, Absent, No-movement, Man-down,
Edit alarm data, Menu, Call list, Services, RSSI, Network
statistics, Call diversionsa or Presence. Press “Select”.
Send message:
Press “Select”. When Message address is shown you can leave
it blank, or you can predefine a destination address; press
“Select”.
Change profile:
Press “Select”. Mark the desired profile and press “Select”.
Presence
b
Press “Select”.
PTTc
If needed a specific PTT group can be assigned. Press “Select”.
Not used:
Press “Select”. Not used will be indicated in the Soft key list.
a. Only applicable with the H.323 protocol
b.Requires that the handset has logged into a Presence management System.
c.Requires a Multi Point Control Unit (MCU) and that groups have been created in the system.
The name of the selected function is shown. The handset will automatically return
to the soft key.
15.5.9 Edit a Hot key
1
Mark the Settings icon and press “Select”.
2
Mark “Hot key” and press “Select”.
3
Mark the one you want to edit (0, 1, 2,......9) and press “Change”.
4
Name: is marked; press “Edit”.
5
Enter a name of maximum sixteen characters. Press “Ok”. Changes saved is shown
and the handset automatically returns to the hot key.
6
Mark “Function”. Press “Change” to enter functions.
7
Choose the function you want the Hot key to have. The functions for a Hot key are
the same as for a Soft key, see table under 15.5.8 Edit a Soft key on page 47.
Note: This function can be disabled by your system administrator.
15.5.10 Select Language
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Language” and press “Select”.
2008-11-10/ Ver. D
48
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Note: There is a “*” symbol in front of Language, making it easy to find if you have
changed language by mistake.
4
Mark the desired language. Press “Select”. The language is shown. The handset
will automatically return to the list of general settings.
15.5.11 Change Text Size in Messages
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Text size” and press “Select”.
4
Choose between Small and Medium. Press “Select”. The chosen text size is shown
and the handset automatically returns to the list of general settings.
15.5.12 Lock the Handset Manually1
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Phone lock”. Press “Select” and mark “Lock phone”. Press “Select”; the
handset is locked.
15.5.13 Change the Lock Code1
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Phone lock” and Press “Select”.
4
Mark “Set lock code” and Press “Select”.
5
Enter the new lock code and press “Ok”.
15.5.14 Time and Date Settings
Set Time and Date Format
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Time & date” and Press “Select”.
4
Mark “Time format” and press “Select”.
5
Mark the desired time format (12 hour or 24 hour) and press “Select”. The handset
will automatically return to the list.
6
Mark “Date format” and press “Select”.
7
Mark the desired date format and press “Select”.
15.5.15 Turn On/Off Automatic Keypad Lock
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
1.The i75 Handset cannot be locked with an “empty” lock code.
2008-11-10/ Ver. D
49
User Manual
Ascom i75 VoWiFi Handset
3
TD 92319GB
Mark “Auto key lock” and press “Change”. The Auto key lock checkbox is
selected/cleared. In stand-by mode a locked keypad is indicated by the
Locked keypad icon.
15.5.16 Enable/Disable Quick Answer
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Quick answer” and press “Change”. The Quick answer check box is
selected/cleared.
15.5.17 Display New Messages 180º Rotated (upside down)
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “New message rotated” and press “Change”. The New message rotated
checkbox is selected/cleared.
Note: When this parameter is set, the call information for incoming calls is also displayed
upside down.
15.5.18 Set Owner ID
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Owner ID” and press “Edit”.
4
Enter a name. Change between upper and lower case by pressing the *-key on the
keypad. Press “Save”. The new ID is shown. The handset will automatically return
to the list of general settings.
15.5.19 Change Display Contrast
1
Mark the Settings icon and press “Select”.
2
Mark “General” and press “Select”.
3
Mark “Display contrast” and press “Select”. Mark the desired contrast level by
using the Navigation key or . You have fifteen available alternatives; level 1 to
15.
4
Activate your choice by pressing “Select”; the selected contrast level is shown. The
handset will automatically return to stand-by mode.
15.5.20 Select System
1
Mark the Settings icon and press “Select”.
2
Mark “System” and press “Select”.
3
Mark “Select system” and press “Select”.
4
Mark the desired system and press “Select”. System selected is shown. The handset
will automatically return to the system menu.
2008-11-10/ Ver. D
50
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Select System Set as a Hot key
If you are often moving between systems, it might be convenient to change system
quickly, therefore you can set this function as a Soft key or Hot key.
To change systems: just press the pre-programmed Soft/Hot key to connect to the next
available VoWiFi system (A, B, C or D).
15.5.21 System Information
It is possible to obtain general information about the handset by doing the following:
1
Mark the Settings icon in the menu. Press “Select”.
2
Mark “System” and press “Select”.
3
Mark “Information”. Press “Select” to view information about:
• ESSID: The ID of the system to which the handset is connected.
• IP: The IP address of the handset assigned by the system.
• MAC: The MAC (hardware) address of the handset. This is stored in the handset
and will always be the same.
• SW version: Here you can see which version of the handset software you have.
• Alarm license: If the handset is equipped with a license or not.
Tip: There is a quick access code you can use to enter the information mode directly
without using the menu. The quick access code is *#46#.
15.6 Profiles
1
Enter the menu by pressing the Menu Soft key, or the Navigation key
2
Mark the Profiles icon and press “Select”.
or
.
020
Figure 42.
Figure 27. The Profiles icon is marked
The handset is equipped with ten Profiles. Two profiles are preset at delivery (Normal and
In charger) and the remaining eight profiles are left for the user to define.
Normal Profile
The Normal profile is the default profile.
In charger Profile
The In Charger profile is activated when the handset is placed in the charger and
deactivated when removed. Your last selected profile is automatically chosen when the
handset is removed from the charger.
2008-11-10/ Ver. D
51
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
User defined Profiles
Eight profiles can be defined and saved by the user. The profiles can, for example, be used
to create a special headset profile with different ring signal volume and automatic answer
of incoming calls. Another example is when several users are sharing the same handset.
Each user can then define his own settings, for example; type of ring signal, volume,
answering method, Soft key settings etc. Note that one has to change to the user defined
profiles manually.
15.6.1 Change between the Profiles
1
Mark the Profiles icon and press “Select”. A list with all profiles is shown.
2
Mark the Profile you want to change to and press “Select”; the name of the
marked Profile is shown. The handset will automatically return to the list.
A Soft/Hot key can be programmed to change profiles, see 15.5.8 Edit a Soft key on page
47 for more information.
15.6.2 Change Profile Settings
1
Mark the Profiles icon and press “Select”. A list with all profiles is shown.
2
Mark the Profile in which you want to change the settings and press “Options”.
3
Mark “Edit:” and press “Select”. The handling is then according to the ordinary
settings, see 15.5 Settings on page 45, but you also have the possibility to set
Absent On/Off, choose answering method, give the profile a new name and to
divert incoming calls.
15.6.3 Set the Profile to Absent On/Off
Follow the instructions described in 15.6.2 Change Profile Settings, and view the profile’s
settings. Mark “Absent” and press “Change”; the Absent checkbox is selected/cleared.
15.6.4 Choose the Profile’s Answering method
1
Follow the instructions described in 15.6.2 Change Profile Settings, and view the
profile’s settings. Mark “Answer:” and press “Select”.
2
Choose the answering method you want. Select between; Ordinary, Auto, Loud, or
Auto loud.
•
•
•
•
3
Ordinary; press
or the middle Soft key for loudspeaking function.
Auto; the call is automatically connected.
Loud; press
and the call is connected with loudspeaking function turned on.
Auto loud; the call is automatically connected with loudspeaking function
turned on.
When you have chosen type of answering method, press “Select”; the name of the
selected method is shown. The handset will automatically return to the list and the
new answering method is marked.
15.6.5 Set the Profile to Divert incoming Calls1
1
Mark the Profiles icon and press “Select”. A list with all profiles is shown.
2
Mark the Profile in which you want to change the settings and press “Options”.
3
Mark “Edit:” and press “Select”.
1.Only applicable with the H.323 protocol
2008-11-10/ Ver. D
52
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
4
Mark “Call diversions” and press “Select”.
5
You can choose; All calls, On busy, or No answer. Press “Change”. Divert to
number:.. is displayed.
6
Enter the telephone number you want to divert to and press “Save”.
15.6.6 Preset Phone Numbers for the Diversions alternatives1
1
Mark the Profiles icon and press “Select”. A list with all profiles is shown.
2
Mark the Profile you wish to have as diversion profile and press “Options”.
3
Mark “Edit:” and press “Select”.
4
Mark “Call diversions” and press “Select”. The diversions alternatives are displayed.
5
Mark the first alternative, “All calls”, and press “Set”. Divert to number:.. is
displayed.
6
Enter the telephone number you want to divert your calls to, and press “Save”. The
handset returns to the diversions alternatives.
7
Mark the next diversion alternative. Press “Set” and repeat point 6.
15.6.7 Customizing the Profiles Menu
A profile can be prevented from being shown in the list. This is an easy way to hide profiles
that are not used. A setting in the flash memory determines whether the profile should be
in the list or not.
1.Only applicable with the H.323 protocol
2008-11-10/ Ver. D
53
User Manual
Ascom i75 VoWiFi Handset
16
TD 92319GB
System Handling
16.1 Register a New VoWiFi System
You can register up to four different VoWiFi systems on your handset.
When you have registered more than one system, you can manually select which system
to connect to, see 15.5.20 Select System on page 50.
16.2 Field Upgrade
Software and parameters in the i75 VoWiFi Handset can be upgraded by using the
Portable Device Manager (PDM). The PDM exists in two versions, Windows version and
System version.
Refer to the Configuration Manual, Ascom i75 VoWiFi Handset TD 92431GB for more
information.
2008-11-10/ Ver. D
54
User Manual
Ascom i75 VoWiFi Handset
17
TD 92319GB
Status text in Display
17.1 Accessibility and Voice Quality
The base network is not always available. If you do not get in contact with your system,
contact your system administrator.
For various reasons, some functionality in the system may be inaccessible, causing various
status texts to appear.
No System
When you leave the system's coverage area the text “No System” will appear in the
display. Additionally, a parameter can be set to enable a short beep to sound when the
message is shown.
Note: When re-entering the coverage area it can take a couple of minutes before the
handset automatically has registered into the system.
It is also possible to get an out of coverage warning signal by setting a flash memory
parameter.
No Access
If the handset has found the system but for some reason cannot connect to it, the text
“No Access” is shown.
Voice Only
If the handset is unable to connect to the IMS, messaging will not be available and the text
“Voice Only” will be shown.
Messaging Only
If the handset is unable to connect to the gateway, voice calling will not be available and
the text “Messaging Only” will be shown.
17.2 Error Codes
When the base network is available a call may sometimes still fail. In such cases, the error
code shown indicates the reason for the failed call.
No response
The called portable is unavailable “not registered”. The error code can also appear the first
two minutes a called handset is out of coverage or if the battery is removed without
turning the handset off.
No Channel Available
The connection fails because no appropriate channel is available to take the call. For
example when a handset is designed for two simultaneous calls and a user tries to make a
third call. Another cause can be that the handset has lost contact with the VoIP Gateway.
2008-11-10/ Ver. D
55
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
Call Failed
Unable to contact the called handset.
User Busy
The person being called is already engaged in another call, or has declined your call.
Invalid Number
The called number does not exist in the system, or the connection between the VoIP
Gateway and the PBX is lost.
17.3 Environmental Requirements
i75 VoWiFi Handset
• Only use the handset in temperatures between 0 o C to +40 oC.
• Avoid exposing in direct sunlight or close to other heat sources.
• Protect your handset from aggressive liquids and vapours.
• Keep the handset away from strong electromagnetic fields.
Battery
• Do not immerse the battery into water or throw into fire.
• Use the desktop charger or the wall mounted charging rack for charging. Charge the
battery for at least one hour the first time you use the battery. Note that the wall
mounted charger with a battery pack adapter has to be used if the battery alone is to
be charged.
2008-11-10/ Ver. D
56
User Manual
Ascom i75 VoWiFi Handset
18
TD 92319GB
Maintenance
18.1 Charge the Battery
The battery requires charging when the handset is not in use or when the Battery icon in
the display shows a low charge.
Place the handset in the charger. A beep indicates connection with the charger. The
charging status is shown by the battery icon in the handset display. After approximately 2–
6 hours the handset is fully charged, indicated by a filled battery icon. If the handset is
switched off when placed in the charger, the charging indicator will be shown. The
charging indicator will show a full battery if the battery is fully charged.
18.1.1 Charging Spare Batteries
Spare batteries can be charged in the wall-mounted Charging Rack equipped with the
Battery Pack Charger.
Figure 43.
LED
Extended battery
024
Battery
Figure 28. Inserting a battery in the battery charger.
Place the battery in the charging slot. The LED on the adapter shows an orange light.
When the battery is fully charged, the LED will show a green light.
If an error occurs during charging, the LED will show a red light.
If the LED does not start to flash when the battery is placed in the charging slot, the
battery is not in contact. Remove the battery and put it into the charging slot again.
Note: It is not possible to charge spare batteries in the Desktop Charger.
18.2 Remove the Battery
The battery is fastened by two hooks. To remove the battery, press firmly on the two
release buttons on the sides of the handset.
2008-11-10/ Ver. D
57
User Manual
Ascom i75 VoWiFi Handset
TD 92319GB
18.3 Change the Clip
A hinge-type belt clip is mounted on the i75 VoWiFi Handset at delivery. The clip can be
replaced with a covering plate also included in the delivery, or a swivel-type belt clip that
can be ordered separately.
Tools required:
• Pozidriv Point size 1
2008-11-10/ Ver. D
58
User Manual
Ascom i75 VoWiFi Handset
19
TD 92319GB
Related Documents
Data Sheet, Ascom i75 VoWiFi Handset
TD 92318GB
Quick Reference Guide Ascom i75 VoWiFi Handset
M0274030
Configuration Manual, Ascom i75 VoWiFi Handset
TD 92431GB
Installation and Operation Manual Phonebook Service
TD 92360GB
Installation and Operation Manual,
Portable Device Manager (PDM), Windows version
TD 92325GB
Installation and Operation Manual,
Portable Device Manager (PDM), System version
TD 92378GB
2008-11-10/ Ver. D
59
User Manual
Ascom i75 VoWiFi Handset
20
TD 92319GB
Document History
For details in the latest version, see change bars in the document.
Version
A
Date
Description
First Released version
B
2006-09-22 Updated for iteration R2, including SIP.
C
2007-09-25 • The appendices; Programming the Handset, Upgrade the
Firmware, and Add a New i75 VoWiFi Handset to the Site,
have been removed and added to the Configuration Manual,
Ascom i75 VoWiFi Handset TD 92431GB.
• Following chapters have been added:
– 7.8 In Call Menu on page 20
– 10 Call Diversion on page 26
– 11 Push-to-Talk Conference Call on page 27
– 12.1.3 Message Queuing and Message Priority on page 30
– 13 Presence Management on page 35
– 15.6.5 Set the Profile to Divert incoming Calls on page 52
– 15.6.6 Preset Phone Numbers for the Diversions alternatives
on page 53
– 15.5.19 Change Display Contrast on page 50
• Illustrations added to 12.1 Message List on page 28
• Services and Settings menu tree have been updated (see
chapters 7.4 and 7.5).
D
2008-11-10/ Ver. D
2008-11-10 • i75 VoWiFi Messenger version added
• Safety Instruction chapter modified
60
User Manual
Ascom i75 VoWiFi Handset
Index
TD 92319GB
Battery ...................................................... 8, 56
Belt clip
hinge-type ................................................. 2
swivel-type................................................. 2
Profiles .................................................... 13
Read interactive message................... 13, 28
Read message ................................... 12, 28
Services ................................................... 13
Settings ................................................... 13
Signal strength ........................................ 11
Unread message................................ 12, 28
Invalid Number ............................................. 56
IP.................................................................. 51
C
K
Call Failed ..................................................... 56
Case
covering plate .......................................... 58
materials .................................................... 7
Chemical resistance......................................... 4
Clip
covering plate ............................................ 8
swivel-type................................................. 8
Keypad ........................................................... 8
A
Antenna.......................................................... 7
B
M
MAC address................................................ 51
message list .................................................. 13
Messaging Only ............................................ 55
N
Display ............................................................ 8
No Access.....................................................
No Channel Available ...................................
No response .................................................
No System ....................................................
E
O
ESSID ........................................................ 1, 51
Owner ID...................................................... 11
H
P
Headset
with hearing protection.............................. 2
with mic..................................................... 2
Pause in a phone number ........... 10, 23, 40, 48
PDM ............................................................... 1
Potentially explosive atmospheres ................... 5
Precautions..................................................... 3
D
I
i75 Medic Protector......................................... 1
i75 Messenger................................................. 1
i75 Protector ................................................... 1
Icon
123.......................................................... 12
ABC ......................................................... 12
abc .......................................................... 12
Action required .................................. 13, 28
Add contact ............................................. 13
Audio signals ........................................... 11
Battery ..................................................... 11
Call list..................................................... 13
Contacts .................................................. 13
Get contact from phonebook................... 13
Headset ................................................... 12
Incoming call............................................ 12
Interactive message............................ 12, 28
Key lock ................................................... 12
Loudspeaking off ..................................... 11
Loudspeaking on...................................... 11
Man-down alarm on ................................ 12
Message continue .................................... 12
Messages ................................................. 13
Missed call ............................................... 12
New message........................................... 13
New voice mail......................................... 12
No-movement.......................................... 12
Off-hook.................................................. 11
Outgoing call ........................................... 12
Padlock .................................................... 12
2008-11-10/ Ver. D
55
55
55
55
S
Software version........................................... 51
Stand-by mode ............................................. 11
Status information ........................................ 11
U
User Busy ..................................................... 56
V
Voice Only .................................................... 55
VoIP ............................................................... 1
VoWiFi ........................................................... 1
W
Warranty notification...................................... 5
WiFi................................................................ 1
Write letters ................................................. 10
61