dedicated KVM switch and rackmount screen technology
User Manual
17” / 19” LCD
RKP1617 / RKP1619
1U LCD Console Drawer
Options :
- AV / DVI-D / HDMI / Audio
- Touchscreen
- DC power
751
Designed and manufactured by Austin Hughes
UM-CV-751-RKP1617-Q215V1
www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-751-RKP1617-Q215V1
www.austin-hughes.com
Contents
< Part. 1 > RKP1617 / RKP1619
1.1
1.2
1.3
1.4
Package Content
Structure Diagram & Dimension
Installation
Connection
P.1
P.1 - 2
P.3
P.4
< Part. 2 > Specifications / OSD
2.1
2.2
2.3
Product Specifications
Keyboard / Mouse Specifications
On-screen Display Operation ( OSD )
P.5 - 6
P.7
P.8 - 9
< Part. 3 > Options
3.1
3.2
3.3
HDMI, DVI-D, S-Video + BNC & Audio
17” / 19” Touchscreen : Resistive, Capacitive
DC Power : 12V / 24V / 48V / 110 ~ 125V
UM-CV-751-RKP1617-Q215V1
P.10
P.11
P.12
www.austin-hughes.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
UM-CV-751-RKP1617-Q215V1
www.austin-hughes.com
< Part 1 >
< 1.1 > Package Content
RKP1617 / 1619
RKP1617 or RKP1619 unit X 1
- CE-6 6ft Combo KVM cable X 1
- Power adapter & Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as HDMI, DVI-D, AV, audio, touchscreen
& DC power.
< 1.2 > Structure Diagram
3
1
4
2
3
1
Installation Slide
4
Full “Unix style” keyboard with numerial pad
2
LCD membrane
5
Carry handle to release the 2-pt lock
3
LCD interchangeable module kit
UM-CV-751-RKP1617-Q215V1
P.1
www.austin-hughes.com
< 1.2 > Dimension
Front View
UNIT : mm
Side View
1mm = 0.03937 inch
Top View
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
RKP1617 series
441.6 x 700 x 44 mm
17.4 x 27.6 x 1.73"
595 x 910 x 140 mm
23.4 x 35.8 x 5.5”
12 kg
26 lb
16.5 kg
36 lb
RKP1619 series
441.6 x 700 x 44 mm
17.4 x 27.6 x 1.73"
595 x 910 x 140 mm
23.4 x 35.8 x 5.5”
13 kg
29 lb
17.5 kg
39 lb
The weight is only for the single console models. It varies with accessories & options
such as HDMI, DVI-D, AV, audio, touchscreen & DC power.
UM-CV-751-RKP1617-Q215V1
P.2
www.austin-hughes.com
< 1.3 > Installation - How to install Installation Slides
Step
■
1
Insert the left and right rear mounting brackets into
the LCD console drawer.
Step
■
■
RKP1617 / 1619
2
Measure the depth of the front and rear mounting rails.
Align each rear mounting bracket to a suitable length.
Step
3
Complete the installation
■
Fix the LCD console drawer into the rack.
M6 screw, cage nut & cup washer x 8 are provided.
UM-CV-751-RKP1617-Q215V1
P.3
www.austin-hughes.com
< 1.4 > Connection to
PS/2 or USB Server
LCD console drawer
LCD console drawer
KVM
KVM
CE-6 Combo
KVM cable
CE-6 Combo
KVM cable
PS/2 server
USB server
< 1.4 > Connection to external KVM
LCD console drawer
LCD console drawer
KVM
KVM
CE-6 Combo
KVM cable
CE-6 Combo
KVM cable
PS/2 console KVM
USB console KVM
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
UM-CV-751-RKP1617-Q215V1
P.4
www.austin-hughes.com
< Part 2 >
< 2.1 > Product Specifications
LCD
Panel
RKP1617 / 1619
RKP1617
RKP1619
17-inch TFT color LCD
19-inch TFT color LCD
1280 x 1024
1280 x 1024
250
250
Contrast Ratio ( typ. )
1000:1
1000:1
Color
16.7 M
16.7 M
80/80/80/80
85/85/80/80
5
5
0.264
0.294
337.92H x 270.33V
376.32H x 301.06V
Manufacturer
Panel Size ( diagonal )
Display pixel ( dots x lines )
Brightness ( typ. )
Viewing Angle ( L/R/U/D )
Response Time ( ms )
Dot pitch ( mm )
Display Area ( mm )
Surface treatment
Haze 25%, Hard-coating
Surface hardness
Video
Connectivity
3H
3H
Backlight Type
CCFL
LED
MTBF ( hrs )
50,000
30,000
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
VGA
Analog 0.7Vp-p
Composite ( BNC )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio Input
Connector
3.5mm stereo jack
Impedance / Power level
30kΩ / 750mV
Connector
3.5mm stereo jack
Resistance / Power level
30kΩ / 2.8V
Power
2 x 2W
Analog
Audio
Connectivity
Audio Output
Speaker Output
*When the audio output is connected, speaker output is OFF
Power
Regulatory
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
25W or less
Power saving mode
4W or less
Power button OFF
1W or less
Safety
FCC & CE certified
Environmental
RoHS2 & REACH compliant
UM-CV-751-RKP1617-Q215V1
P.5
www.austin-hughes.com
Environmental
Conditions
Operating
Storage
Physical
Specification
Temperature
0 to 55°C degree
Humidity
20~90%, non-condensing
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Product ( W x D x H )
Packing ( W x D x H )
Net Weight
Gross Weight
Applicable
Format
VGA Input
RKP1617
RKP1619
441.6 x 700 x 44 mm
441.6 x 700 x 44 mm
17.4 x 27.6 x 1.73 inch
17.4 x 27.6 x 1.73 inch
595 x 910 x 140 mm
595 x 910 x 140 mm
23.4 x 35.8 x 5.5 inch
23.4 x 35.8 x 5.5 inch
12 kgs / 26 lbs
13 kgs / 29 lbs
16.5 kgs / 36 lbs
17.5 kgs / 39 lbs
PC Signal
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
UM-CV-751-RKP1617-Q215V1
P.6
www.austin-hughes.com
RKP1617 / 1619
< 2.2 > Keyboard / Mouse Specifications
t
Compact keyboard integrated with touchpad
d
Compact keyboard integrated with trackball
Key force
90 ± 7g
Travelling distance
4.0mm
Switch life
> 3 million life cycle time
Software support
MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac
Supporting layouts
America
United States
UM-CV-751-RKP1617-Q215V1
P.7
www.austin-hughes.com
< 2.3 > On-screen Display Operation ( OSD )
Membrane Switch
Function
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed control
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power
touch button will flash continuously when there is no signal input.
1
All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power
2
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power
UM-CV-751-RKP1617-Q215V1
P.8
).
).
www.austin-hughes.com
RKP1617 / 1619
< 2.3 > On-screen Display Operation ( OSD )
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
UM-CV-751-RKP1617-Q215V1
P.9
www.austin-hughes.com
< Part 3 >
< 3.1 > Options :
- HDMI
- DVI-D
- AV
- Audio
( HDMI 1.1, CEA-861-D )
( DVI-D TMDS single link )
( S-Video + Composite, BNC )
( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
Either HDMI or DVI-D can be selected.
Audio
S-Video BNC
Power
HDMI
DVI-D
KVM
in - in - out
PC Video
UM-CV-751-RKP1617-Q215V1
P.10
www.austin-hughes.com
RKP1617 / 1619
< 3.2 > Options : Touchscreen & driver
17” / 19" USB Touchscreen Specification
17’
Model
19”
17”
e-Resistive
TRB
19”
TCB
e-Capacitive
Technology
5-Wire Resistive
Capacitive
Touch Point
Single
Single
Stylus or Finger
Finger
≤ 50g / Stylus=R0.8
≤ 50g
35 million touches
300 million touches
15 ms
20 ms
80% ± 3%
93% ±2%
3H
9H
8% ± 3%
7%
Method
Activation Force
Durability
Response Time
Optical Transmittance
Surface Hardness
Haze
Glass
1.4 ±0.2 mm
Connector
Compatibility
■
■
■
3.2 ±0.2 mm
2.8 mm ±10%
2.8 mm ±10%
USB Type A
USB Type A
Windows 7 / XP / Vista, Linux
Windows 7 / XP / Vista, Linux
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
Power
KVM
Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below :
http://www.austin-hughes.com/downloads/KBDDL/software.html
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration
after the first setup
UM-CV-751-RKP1617-Q215V1
P.11
www.austin-hughes.com
< 3.3 > Options : DC Power
Model
12V
24V
48V
110 ~ 125V
Input voltage:
12-Volt
24-Volt
48-Volt
110-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
66 ~ 160V
- No load
50 mA
50 mA
50 mA
40 mA
- Full load
4950 mA
2450 mA
1220 mA
993 mA
Output voltage:
12-Volt
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
8.4A
Efficiency
84%
85%
85%
92%
Input rating
Input current
Output rating
DC power
KVM
***
Option excludes 1 x power cord and 1 x AC power adapter
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved.
UM-CV-751-RKP1617-Q215V1
P.12
www.austin-hughes.com