HP NX7010 - - BUSINESS NOTEBOOK Laptop AC Adapter Specifications

Maintenance and Service
Guide
HP Compaq nx6110/nc6110 and
nx6120/nc6120 Notebook PCs
Document Part Number: 373146-002
September 2005
This guide is a troubleshooting reference used for maintaining
and servicing the computer. It provides comprehensive
information on identifying computer features, components, and
spare parts; troubleshooting computer problems; and performing
computer disassembly procedures.
© Copyright 2005 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation. Intel, Pentium, and Celeron are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and
other countries. Bluetooth is a trademark owned by its proprietor and used
by Hewlett-Packard Company under license. SD Logo is a trademark of its
proprietor.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Maintenance and Service Guide
HP Compaq nx6110/nc6110 and nx6120/nc6120
Notebook PCs
Second Edition September 2005
First Edition February 2005
Document Part Number: 373146-002
Contents
1 Product Description
1.1
1.2
1.3
1.4
1.5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Resetting the Computer. . . . . . . . . . . . . . . . . . . . . . . 1–5
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
External Components . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Design Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–22
2 Troubleshooting
2.1 Computer Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Computer Setup . . . . . . . . . . . . . . . . . . . . . . .
Selecting from the Main Menu . . . . . . . . . . . . . . . . .
Selecting from the Security Menu . . . . . . . . . . . . . .
Selecting from the Advanced Menu . . . . . . . . . . . . .
Selecting from the Tools Menu. . . . . . . . . . . . . . . . .
2.2 Troubleshooting Flowcharts . . . . . . . . . . . . . . . . . . .
2–1
2–1
2–2
2–3
2–4
2–4
2–5
3 Software Updates and Recovery
3.1 Software Updates . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing Computer Information . . . . . . . . . . . . . . .
Obtaining the Support Software CD . . . . . . . . . . . . .
Software Updates and the HP Web Site . . . . . . . . . .
Maintenance and Service Guide
3–1
3–2
3–3
3–3
iii
Contents
3.2 System Recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–8
Safeguarding Your Data . . . . . . . . . . . . . . . . . . . . . . 3–8
Altiris Local Recovery . . . . . . . . . . . . . . . . . . . . . . . 3–8
Using System Restore Points . . . . . . . . . . . . . . . . . . 3–9
Reinstalling Applications . . . . . . . . . . . . . . . . . . . . 3–11
Repairing the Operating System . . . . . . . . . . . . . . . 3–12
Reinstalling the Operating System . . . . . . . . . . . . . 3–14
Reinstalling Device Drivers and Other Software . . 3–16
4 Illustrated Parts Catalog
4.1
4.2
4.3
4.4
4.5
4.6
4.7
Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 4–1
Computer Major Components. . . . . . . . . . . . . . . . . . 4–2
Miscellaneous Plastics Kit . . . . . . . . . . . . . . . . . . . 4–14
Miscellaneous Cable Kit . . . . . . . . . . . . . . . . . . . . . 4–15
Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . 4–16
Miscellaneous (Not Illustrated). . . . . . . . . . . . . . . . 4–18
Sequential Part Number Listing . . . . . . . . . . . . . . . 4–21
5 Removal and Replacement Preliminaries
5.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 Service Considerations . . . . . . . . . . . . . . . . . . . . . . .
Plastic Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . .
5.3 Preventing Damage to Removable Drives . . . . . . . .
5.4 Preventing Electrostatic Damage . . . . . . . . . . . . . . .
5.5 Packaging and Transporting Precautions . . . . . . . . .
5.6 Workstation Precautions . . . . . . . . . . . . . . . . . . . . . .
5.7 Grounding Equipment and Methods . . . . . . . . . . . . .
5–1
5–2
5–2
5–2
5–3
5–4
5–5
5–6
5–7
6 Removal and Replacement Procedures
6.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1
6.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 6–2
6.3 Preparing the Computer for Disassembly . . . . . . . . . 6–4
iv
Maintenance and Service Guide
Contents
6.4 Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–6
6.5 Computer Feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–9
6.6 Bluetooth Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–10
6.7 External Memory Module . . . . . . . . . . . . . . . . . . . . 6–12
6.8 Mini PCI Communications Module . . . . . . . . . . . . 6–14
6.9 Optical Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–16
6.10 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–18
6.11 Switch Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–24
6.12 LED Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–26
6.13 Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–28
6.14 Heat Sink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–29
6.15 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–30
6.16 Modem Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–32
6.17 Internal Memory Module . . . . . . . . . . . . . . . . . . . 6–34
6.18 RTC Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–35
6.19 Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 6–36
6.20 Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–39
6.21 Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–43
6.22 Digital Media Board . . . . . . . . . . . . . . . . . . . . . . . 6–46
6.23 USB/Audio Board . . . . . . . . . . . . . . . . . . . . . . . . . 6–48
6.24 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–50
6.25 Serial Connector Module . . . . . . . . . . . . . . . . . . . 6–55
7 Specifications
Maintenance and Service Guide
v
Contents
A Connector Pin Assignments
B Power Cord Set Requirements
C
Screw Listing
D Display Component Recycling
Index
vi
Maintenance and Service Guide
1
Product Description
The HP Compaq nx6110/nc6110 and nx6120/nc6120
Notebook PCs offer advanced modularity, Intel® Pentium® M
and Celeron® M processors, and extensive multimedia support.
HP Compaq nx6110/nc6110 and nx6120/nc6120
Notebook PCs
Maintenance and Service Guide
1–1
Product Description
1.1 Features
■
The following processors are available, varying by
computer model:
❏ Intel Pentium M 2.13-, 2.00-, 1.86-, 1.73-, 1.60-, or
1.30-GHz processor,
❏ Intel Celeron M 1.5- or 1.4-GHz
■
The following displays are available, varying by
computer model:
❏ 15.0-inch, SXGA+WVA, TFT (1400 × 1050) with over
16.8 million colors
❏ 15.0-inch, XGA, TFT (1280 × 800) with over 16.8 million
colors
❏ 14.1-inch, XGA, TFT (1280 × 800) with over 16.8 million
colors
1–2
■
80-, 60-, 40-, or 30-GB high-capacity hard drive, varying by
computer model
■
256-MB DDR2 synchronous DRAM (SDRAM) at 400 and
533 MHz, expandable to 2.0 GB
■
Microsoft® Windows® XP Home Edition or Windows XP
Professional, varying by computer model
■
Full-size Windows keyboard with embedded numeric keypad
■
TouchPad pointing device, including a dedicated vertical
scroll region and a button that enables/disables TouchPad
operation.
■
TouchPad and pointing stick pointing devices (select
models only)
■
Integrated 10 Base-T/100 Base-TX Ethernet local area
network (LAN) network interface card (NIC) with RJ-45 jack
Maintenance and Service Guide
Product Description
■
Integrated high-speed 56K modem with RJ-11 jack
■
Integrated wireless support for Mini PCI IEEE 802.11b or
802.11b/g WLAN device
■
Support for 1 or 2 Type II PC Card slots, with support
for both 32-bit (CardBus) and 16-bit PC Cards, varying by
computer model
■
External 65-watt AC adapter with 3-wire power cord, varying
by computer model
■
6-cell Li-Ion battery pack
■
Stereo speakers
■
Volume up, volume mute, and volume down buttons
(full-featured models only)
references are made throughout this Maintenance
✎ Numerous
and Service Guide to “full-featured” and “defeatured” units. A
computer model is considered to be full-featured if it has
4 Universal Serial Bus ports, 2 PC Card slots, and the following
components:
■ Volume control buttons
■ Info Center button
■ Infrared port
■ 6-in-1 Digital Media Slot
■ Serial port
■ Parallel port
■ S-Video-out jack
■ Docking connector
A computer model is considered to be defeatured if it has only
2 Universal Serial Bus ports, 1 PC Card slot, and none of the
components in the preceding list.
Maintenance and Service Guide
1–3
Product Description
■
Support for the following optical drives:
❏ DVD±RW and CD-RW Combo Drive
❏ DVD/CD-RW Combo Drive
❏ DVD-ROM drive
❏ CD-ROM drive
■
Connectors:
❏ Audio-out (headphone)
❏ Audio-in (microphone)
❏ Universal Serial Bus (USB) v. 2.0 (4 ports on full-featured
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
1–4
computer models, 2 ports on defeatured computer models)
Power
External monitor
RJ-11 (modem)
RJ-45 (network)
IEEE 1394
Travel battery
Infrared (full-featured models only)
Digital Media Slot (full-featured models only)
Parallel port (full-featured models only)
S-Video-out (full-featured models only)
Docking connector (full-featured models only)
Maintenance and Service Guide
Product Description
1.2 Resetting the Computer
If the computer you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS:
1. Prepare the computer for disassembly (refer to Section 6.3,
“Preparing the Computer for Disassembly,” for more
information).
2. Remove the real-time clock (RTC) battery (refer to
Section 6.18, “RTC Battery,” for more information on
removing and replacing the RTC battery).
3. Wait approximately 5 minutes.
4. Replace the RTC battery and reassemble the computer.
5. Connect AC power to the computer. Do not reinsert any
battery packs at this time.
6. Turn on the computer.
All passwords and all CMOS settings have been cleared.
1.3 Power Management
The computer comes with power management features that
extend battery operating time and conserve power. The
computer supports the following power management features:
■
Standby
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting the level of performance
■
Battery calibration
■
Lid switch standby/resume
■
Power button
■
Advanced Configuration and Power Management (ACPM)
compliance
Maintenance and Service Guide
1–5
Product Description
1.4 External Components
The external components on the front of the computer are shown
below and described in Table 1-1.
Front Components
Table 1-1
Front Components
Item
Component
Function
1
Infrared port
(full-featured models
only)
Provides wireless communication between
the computer and an optional IrDA-compliant
device.
2
Stereo speakers (2)
Produce stereo sound.
3
Display release latch
Opens the computer.
4
Wireless light
On: an integrated wireless device has been
enabled.
1–6
Maintenance and Service Guide
Product Description
Table 1-1
Front Components (Continued)
Item
Component
Function
5
Power light
■ Green: The computer is on.
■ Blinking green: The computer is in
standby.
■ Off: The computer is off or in hibernation.
6
Battery light
■ Amber: A battery pack is charging.
■ Green: A battery pack is close to full
charge capacity.
■ Blinking amber: A battery pack that is the
only available power source has reached
a low-battery condition. When the battery
reaches a critical low-battery condition,
the battery light begins blinking more
quickly.
■ Off: If the computer is connected to an
external power source, the light is turned
off when all batteries in the computer are
fully charged. If the computer is not
connected to an external power source,
the light is turned off until the battery
reaches a low-battery condition.
7
Integrated Drive
Electronics (IDE) drive
light
Blinking: The hard drive or optical drive is
being accessed.
8
6-in-1 Digital Media
Slot (full-featured
models only)
Supports 6 optional digital memory card
formats: SD (Secure Digital) Memory Card,
MultiMediaCard, Memory Stick, Memory
Stick Pro, SmartMedia, and xD-Picture Card.
9
6-in-1 Digital Media
Slot light (full-featured
models only)
On: A digital memory card is being
accessed.
Maintenance and Service Guide
1–7
Product Description
The external components on the right side of the computer are
shown below and described in Table 1-2.
Right-Side Components
1–8
Maintenance and Service Guide
Product Description
Table 1-2
Right-Side Components
Item
Component
Function
1
Audio-out
(headphone) jack
Connect optional headphones or powered
stereo speakers. Also connects the audio
function of an audio/video device such as
a television or VCR.
2
Audio-in
(microphone) jack
Connects an optional monaural microphone.
3
USB ports (2)
(full-featured
models only)
Connect USB 1.1- and 2.0-compliant
devices to the computer using a standard
USB cable, or connect an optional External
MultiBay II to the computer. The MultiBay II
must also be connected to an external power
source.
4
Optical drive
Supports an optical disc. The type of optical
drive varies by model.
5
Serial port (full-featured
models only)
Connects an optional serial device.
Maintenance and Service Guide
1–9
Product Description
The external components on the left side of the computer are
shown below and described in Table 1-3.
Left-Side Components
Table 1-3
Left-Side Components
Item
Component
Function
1
USB ports (2)
Connect USB 1.1- and 2.0-compliant
devices to the computer using a standard
USB cable, or connect an optional External
MultiBay II to the computer. The MultiBay II
must also be connected to an external
power source.
2
External monitor port
Connects an optional VGA external monitor
or projector.
1–10
Maintenance and Service Guide
Product Description
Table 1-3
Left-Side Components (Continued)
Item
Component
Function
3
Exhaust vent
Provides airflow to cool internal
components.
Ä
To prevent overheating, do not obstruct vents. Do not allow a
hard surface, such as a printer, or a soft surface, such as
pillows, thick rugs, or clothing, to block airflow.
4
RJ-11 (modem) jack
Connects the modem cable.
5
RJ-45 (network) jack
Connects an optional network cable.
6
1394 port
Connects an optional 1394a device such
as a scanner, digital camera, or digital
camcorder.
7
PC Card slots (2 slots
on full-featured
models, 1 slot on
defeatured models)
Support an optional Type I, Type II, or
Type III 32-bit (CardBus) or 16-bit PC Card.
8
PC Card eject buttons
(2 buttons on
full-featured models,
1 button on defeatured
models)
Eject an optional PC Card from the
PC Card slot.
Maintenance and Service Guide
1–11
Product Description
The external components on the rear panel of the computer are
shown below and described in Table 1-4.
Rear Panel Components
1–12
Maintenance and Service Guide
Product Description
Table 1-4
Rear Panel Components
Item
Component
Function
1
Security cable slot
Attaches an optional security cable to the
computer.
Ä
Security solutions are designed to act as deterrents. These
deterrents may not prevent a product from being mishandled or
stolen.
2
Battery bay
Holds a battery pack.
3
Power connector
Connects an AC adapter or an optional
automobile or aircraft adapter.
4
Parallel port
(full-featured
models only)
Connects an optional parallel device, such
as an external diskette drive or a printer.
5
S-Video-out jack
(full-featured
models only)
Connects an optional S-Video device,
such as a television, VCR, camcorder,
projector, or video capture card.
Maintenance and Service Guide
1–13
Product Description
The standard keyboard components of the computer are shown
below and described in Table 1-5.
Standard Keyboard Components
1–14
Maintenance and Service Guide
Product Description
Table 1-5
Standard Keyboard Components
Item
Component
Function
1
f1 to f12 keys (12)
Perform system and application tasks.
When combined with the fn key, several
keys and buttons perform additional tasks
as hotkeys.
2
caps lock key
Enables caps lock and turns on the caps
lock light.
3
fn key
Executes frequently used system
functions when pressed in combination
with a function key or the esc key.
4
Windows logo key
In Windows, displays the Windows
Start menu.
5
Windows
applications key
In Windows, displays a shortcut menu
for items beneath the pointer.
6
Arrow keys
Moves the cursor around the screen.
7
Keypad keys (15)
In Windows, can be used like the keys
on an external numeric keypad.
8
num lock key
Enables numeric lock, turns on the
embedded numeric keypad, and turns
on the num lock light.
Maintenance and Service Guide
1–15
Product Description
The computer top components are shown below and described in
Table 1-6.
Top Components, Part 1
Table 1-6
Top Components, Part 1
Item
Component
Function
1
Power light
■ On: The computer is turned on.
■ Blinking: The computer is in standby,
■ Off: The computer is off.
Power button
When the computer is:
■ Off, press to turn on the computer.
■ On, briefly press to initiate hibernation.
■ In standby, briefly press to resume from
standby.
■ In hibernation, briefly press to restore
from hibernation.
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for 5 seconds to turn
off the computer.
1–16
Maintenance and Service Guide
Product Description
Table 1-6
Top Components, Part 1 (Continued)
Item
Component
Function
2
Display lid switch
■ If the computer is closed while on, turns
off the display.
■ If the computer is opened while in
standby, turns on the computer
(resumes from standby).
3
Info Center button
Enables you to view a list of commonly
used software solutions.
Presentation mode
button
Turns on Presentation mode.
Wireless button
Turns the wireless functionality on or off,
but does not create a wireless connection.
4
establish a wireless connection, a wireless network must
✎ To
already be set up.
Wireless light
On: An integrated woreless device has
bee turned on.
5
Caps lock light
On: caps lock is on.
6
Num lock light
On: num lock or the numeric keypad is on.
7
Volume mute button
(full-featured models
only)
Mutes or restores system volume.
8
Volume down button
(full-featured models
only)
Decreases system volume.
9
Volume up button
(full-featured models
only)
Increases system volume.
Maintenance and Service Guide
1–17
Product Description
The computer top components are continued below and described
in Table 1-7.
Top Components, Part 2
1–18
Maintenance and Service Guide
Product Description
Table 1-7
Top Components, Part 2
Item
Component
Function
1
Pointing stick
Moves the pointer and selects or activates
items on the screen.
2
Left/right pointing stick
buttons
Function like the left and right buttons on
an external mouse.
3
TouchPad
Moves the pointer and selects or activates
items on the screen. Can be set to perform
other mouse functions, such as scrolling,
selecting, and double-clicking.
4
Left/right TouchPad
buttons
Function like the left and right buttons on
an external mouse.
5
TouchPad scroll zone
Scrolls up or down.
Maintenance and Service Guide
1–19
Product Description
The external components on the bottom of the computer are
shown below and described in Table 1-8.
Bottom Components
Table 1-8
Bottom Components
Item
Component
Function
1
Primary battery bay
Holds the primary battery pack.
2
Primary battery locking
latch
Secures the primary battery pack into
the battery bay.
3
Docking connector
(full-featured models only)
Connects the computer to an optional
docking device.
1–20
Maintenance and Service Guide
Product Description
Table 1-8
Bottom Components (Continued)
Item
Component
Function
4
Memory module
compartment
Contains 2 memory slots that support
replaceable memory modules. The
number of preinstalled memory
modules varies by computer model.
Holds an optional wireless LAN device.
Mini PCI compartment
Ä
To prevent an unresponsive system and the display of a
warning message, install only a Mini PCI device authorized for
use in your computer by the governmental agency that
regulates wireless devices in your country. If you install a
device and then receive a warning message, remove the
device to restore computer functionality. Then contact
Customer Care.
5
Hard drive bay
Holds the primary hard drive.
6
Primary battery release
latch
Releases the primary battery pack from
the battery bay.
7
Travel battery connector
Connects an optional travel battery.
8
Fan
Provides airflow to cool internal
components.
Ä
To prevent overheating, do not obstruct fans. Do not allow a
hard surface, such as a printer, or a soft surface, such as
pillows, thick rugs, or clothing, to block airflow.
Maintenance and Service Guide
1–21
Product Description
1.5 Design Overview
This section presents a design overview of key parts and features
of the computer. Refer to Chapter 4, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 6, “Removal and
Replacement Procedures,” for disassembly steps.
The system board provides the following device connections:
Ä
■
Memory module
■
Mini PCI communications devices
■
Hard drive
■
Display
■
Keyboard and TouchPad
■
Audio
■
Intel Pentium M and Intel Celeron M processors
■
PC Card
CAUTION: To properly ventilate the computer, allow at least a 7.6--cm
(3-inch) clearance on the left and right sides of the computer.
The computer uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to be turned
on automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system
power consumption, power management/battery conservation
configurations, battery fast charging, and software applications.
Exhaust air is displaced through the ventilation grill located on
the left side of the computer.
1–22
Maintenance and Service Guide
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by HP should repair
this equipment. All troubleshooting and repair procedures are detailed
to allow only subassembly-/module-level repair. Because of the
complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or modifications to any printed
wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board
modification may void any warranty or exchange allowances.
2.1 Computer Setup
Computer Setup is a system information and customization utility
that can be used even when the operating system is not working
or will not load. This utility includes settings that are not
available in Windows.
Using Computer Setup
Information and settings in Computer Setup are accessed from
the Main, Security, Advanced, or Tools menus:
1. Turn on or restart the computer. Press f10 while the
F10 = ROM-Based Setup message is displayed in
the lower-left corner of the screen.
❏ To change the language, use the cursor control keys
to navigate to the Advanced menu.
❏ To view navigation information, press f1.
❏ To return to the Computer Setup menu, press esc.
Maintenance and Service Guide
2–1
Troubleshooting
2. Select the Main, Security, Advanced, or Tools menu.
3. To close Computer Setup and restart the computer:
❏ Select Exit > Exit Saving Changes, and then press enter.
– or –
❏ Select Exit > Exit Discarding Changes, and then
press enter.
– or –
❏ Select Exit > Load Setup Defaults, and then press enter.
4. When you are prompted to confirm your action, press f10.
Selecting from the Main Menu
Table 2-1
Main Menu
Select
To Do This
System Information
■ Change the system time and system date.
■ View identification information about the
computer.
■ View specification information about the
processor, memory and cache size, and
system ROM.
2–2
Maintenance and Service Guide
Troubleshooting
Selecting from the Security Menu
Table 2-2
Security Menu
Select
To Do This
Administrator Password
Enter, change, or delete an Administrator
password.
Power-on Password
Enter, change, or delete a power-on password.
DriveLock Passwords
Enable/disable DriveLock; change a DriveLock
user or master password.
Settings are accessible only
✎ DriveLock
when you enter Computer Setup by turning
on (not restarting) the computer.
Password Options
(Password options can
be selected only when
a power-on password
has been set.)
Enable/disable:
■ QuickLock
■ QuickLock on Standby
■ QuickBlank
enable QuickLock on Standby or
✎ To
QuickBlank, you must first enable
QuickLock.
Device Security
Enable/disable:
■ Diskette drive startup*
■ CD-ROM or diskette startup
for a DVD-ROM can be entered
✎ Settings
in the CD-ROM field.
*Not applicable to SuperDisk LS-120 drives.
Maintenance and Service Guide
2–3
Troubleshooting
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
Select
To Do This
Language
Change the Computer Setup language.
Boot Order
Enable/disable MultiBoot, which sets a startup
sequence that can include most bootable devices
and media in the system.
Accessibility Options
Allows electronic and information technology to
be accessible to people with varying ranges of
abilities.
Video Memory
Displays the amount of video memory available
on the computer.
Selecting from the Tools Menu
Table 2-4
Tools Menu
Select
To Do This
Hard Drive Self Test
Run a quick comprehensive self test on hard
drives in the system that support the test features.
2–4
Maintenance and Service Guide
Troubleshooting
2.2 Troubleshooting Flowcharts
Table 2-5
Troubleshooting Flowcharts Overview
Flowchart
Description
2.1
“Flowchart 2.1—Initial Troubleshooting”
2.2
“Flowchart 2.2—No Power, Part 1”
2.3
“Flowchart 2.3—No Power, Part 2”
2.4
“Flowchart 2.4—No Power, Part 3”
2.5
“Flowchart 2.5—No Power, Part 4”
2.6
“Flowchart 2.6—No Video, Part 1”
2.7
“Flowchart 2.7—No Video, Part 2”
2.8
“Flowchart 2.8—Nonfunctioning Docking Device (if applicable)”
2.9
“Flowchart 2.9—No Operating System (OS) Loading”
2.10
“Flowchart 2.10—No OS Loading, Hard Drive, Part 1”
2.11
“Flowchart 2.11—No OS Loading, Hard Drive, Part 2”
2.12
“Flowchart 2.12—No OS Loading, Hard Drive, Part 3”
2.13
“Flowchart 2.13—No OS Loading, Diskette Drive”
Maintenance and Service Guide
2–5
Troubleshooting
Table 2-5
Troubleshooting Flowcharts Overview (Continued)
Flowchart
Description
2.14
“Flowchart 2.14—No OS Loading, Optical Drive”
2.15
“Flowchart 2.15—No Audio, Part 1”
2.16
“Flowchart 2.16—No Audio, Part 2”
2.17
“Flowchart 2.17—Nonfunctioning Device”
2.18
“Flowchart 2.18—Nonfunctioning Keyboard”
2.19
“Flowchart 2.19—Nonfunctioning Pointing Device”
2.20
“Flowchart 2.20—No Network/Modem Connection”
2–6
Maintenance and Service Guide
Troubleshooting
Flowchart 2.1—Initial Troubleshooting
Begin
troubleshooting.
N
Go to
Is there
power?
“Flowchart
2.2—No Power,
Part 1.”
Y
N
Check
LED board,
speaker
connections.
Beeps,
LEDs, or error
messages?
N
Y
Go to
All drives
working?
N
Go to
Is there video?
(no boot)
Y
“Flowchart
2.6—No Video,
Part 1.”
N
Keyboard/
pointing
device
working?
Y
N
Go to
Is the OS
loading?
N
Go to
Is there
sound?
Y
“Flowchart
2.9—No Operating
System (OS)
Loading.”
Y
“Flowchart
2.15—No Audio,
Part 1.”
Y
Maintenance and Service Guide
“Flowchart
2.17—Nonfunctioning Device.”
Go to
“Flowchart
2.18—Nonfunctioning Keyboard”
or “Flowchart
2.19—Nonfunctioning Pointing
Device.”
N
Connecting
to network
or modem?
Y
Go to
“Flowchart
2.20—No
Network/Modem
Connection.”
End
2–7
Troubleshooting
Flowchart 2.2—No Power, Part 1
No power
(power LED
is off).
Remove from
docking device
(if applicable).
N
N
Power up
on battery
power?
Go to
Power up
on battery
power?
Reset
power.*
“Flowchart
2.3—No Power,
Part 2.”
Y
Y
N
N
Power up
on AC
power?
Power up
on AC power?
Reset
power.*
Go to
“Flowchart
2.4—No Power,
Part 3.”
Y
Y
Y
Power up in
docking
device?
Done
*NOTES
N
1. Reset the power cables in the docking device
and at the AC outlet.
2. Ensure the AC power source is active.
3. Ensure that the power strip is working.
Y
Done
2–8
N
Power up
in docking
device?
1. On select models, there is a separate reset
button.
2. On select models, the computer can be reset
using the standby switch and either the lid
switch or the main power switch.
Go to
“Flowchart
2.8—Nonfunctioning Docking Device
(if applicable).”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.3—No Power, Part 2
Continued from
“Flowchart
2.2—No Power,
Part 1.”
Visually check for
debris in battery
socket and clean
if necessary.
Y
Power on?
Done
N
Check battery by
recharging it,
moving it to
another computer,
or replacing it.
N
Replace
power supply
(if applicable).
Power on?
Y
N
Go to
Done
Power on?
“Flowchart
2.4—No Power,
Part 3.”
Y
Done
Maintenance and Service Guide
2–9
Troubleshooting
Flowchart 2.4—No Power, Part 3
Continued from
“Flowchart
2.3—No Power,
Part 2.”
Plug directly
into AC outlet.
Y
Power LED
on?
Done
N
Reseat AC adapter
in computer and
at power source.
Y
Power on?
Done
N
External
N
Try different
outlet.
Power outlet
active?
Y
Internal or
external AC
adapter?
Replace external
AC adapter.
N
Internal
Go to
“Flowchart
2.5—No Power,
Part 4.”
Replace
power cord.
Power on?
Y
Y
Done
Power on?
Done
N
2–10
Maintenance and Service Guide
Troubleshooting
Flowchart 2.5—No Power, Part 4
Continued from
“Flowchart
2.4—No Power,
Part 3.”
Open
computer.
Y
Loose or
damaged
parts?
N
Reseat loose
components and
boards and
replace damaged
items.
Close
computer and
retest.
N
Power on?
Replace the following items (if applicable). Check
computer operation after each replacement:
1. Internal DC-DC converter*
2. Internal AC adapter
3. Processor board*
4. System board*
Y
Done
*NOTE: Replace these items as a set to prevent
shorting out among components.
Maintenance and Service Guide
2–11
Troubleshooting
Flowchart 2.6—No Video, Part 1
No video.
Docking Device
Go to
Stand-alone
or docking
device?
*NOTE: To change from internal to
external display, use the hotkey
combination.
“Flowchart
2.7—No Video,
Part 2.”
Stand-alone
Internal or
external
display*?
Y
Adjust
brightness.
A
Adjust
brightness.
Press lid
switch to ensure
operation.
Y
Video OK?
Done
N
Internal
External
Video OK?
Y
Done
N
Video OK?
Done
N
Replace the following one at a time. Test after each replacement.
1. Cable between computer and computer display (if applicable)
2. Display
3. System board
Check for bent
pins on cable.
N
Video OK?
Y
Internal and
external
video OK?
Replace
system
board.
Y
Done
2–12
N
Try
another
display.
Done
Maintenance and Service Guide
Troubleshooting
Flowchart 2.7—No Video, Part 2
Continued from
“Flowchart
2.6—No Video,
Part 1.”
Remove
computer from
docking device,
if connected.
Adjust
display
brightness.
Check brightness
of external
monitor.
N
Y
Go to “A” in
“Flowchart
2.6—No Video,
Part 1.”
Video OK?
Y
Video OK?
Done
N
Check that computer is properly
seated in docking device, for
bent pins on cable, and for
monitor connection.
Try another
external
monitor.
Y
Video OK?
Y
Internal
and external
video OK?
Done
Done
N
N
Go to
Adjust external
monitor display.
Maintenance and Service Guide
“Flowchart
2.8—Nonfunctioning
Docking Device (if
applicable).”
2–13
Troubleshooting
Flowchart 2.8—Nonfunctioning Docking Device
(if applicable)
Nonfunctioning
docking device.
Reset power cord in
docking device and
power outlet.
Check voltage
setting on docking
device.
Reinstall
computer into
docking device.
Y
Reset monitor
cable connector at
docking device.
Docking
device
operating?
N
Y
Docking
device
operating?
N
Remove
computer, reset
all internal parts,
and replace any
damaged items in
docking device.
2–14
Done
Done
Replace the following docking device
components one at a time. Check computer
operation after each replacement.
1. Power supply
2. I/O board
3. Backplane board
4. Switch box
5. Docking device motor mechanism
Maintenance and Service Guide
Troubleshooting
Flowchart 2.9—No Operating System (OS)
Loading
No OS
loading.*
Reset power
cord in docking
device and
power outlet.
No OS loading from hard drive,
go to “Flowchart 2.10—No OS Loading,
Hard Drive, Part 1.”
No OS loading from diskette drive,
go to “Flowchart 2.13—No OS Loading,
Diskette Drive.”
No OS loading from CD-ROM or DVD-ROM
drive, go to “Flowchart 2.14—No OS
Loading, Optical Drive.”
No OS loading from network,
go to “Flowchart 2.20—No Network/Modem
Connection.”
*NOTE: Before beginning troubleshooting, always
check cable connections, cable ends, and drives
for bent or damaged pins.
Maintenance and Service Guide
2–15
Troubleshooting
Flowchart 2.10—No OS Loading, Hard Drive,
Part 1
OS not
loading from
hard drive.
Y
Nonsystem
disk message?
N
Go to
“Flowchart
2.11—No OS
Loading,
Hard Drive, Part 2.”
Reseat
external
hard drive.
Y
OS loading?
Done
N
N
Boot
from
CD?
N
Y
Boot
from
diskette?
Check the Setup
utility for correct
booting order.
Y
Change boot
priority through
the Setup Utility
and reboot.
N
Boot
from
hard drive?
N
Y
Boot
from
hard drive?
Done
Y
2–16
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.11—No OS Loading, Hard Drive,
Part 2
Continued from
“Flowchart
2.10—No OS
Loading,
Hard Drive, Part 1.”
Reseat
hard drive.
N
1. Replace
hard drive.
2. Replace system
board.
CD or
diskette in
drive?
Y
Hard drive
accessible?
Y
Done
N
Remove
diskette and
reboot.
Run FDISK.
Y
Boot
from
hard drive?
N
Done
N
Hard drive
partitioned?
Y
N
Y
N
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Boot
from diskette
drive?
Create partition,
and then format
hard drive to
bootable
C:\ prompt.
Hard drive
formatted?
Format hard drive
and bring to
a bootable
C:\ prompt.
Computer
booted?
Load OS using
Operating System
disc (if applicable).
Y
N
Y
Hard drive
accessible?
Y
Done
N
Go to
“Flowchart
2.12—No OS
Loading,
Hard Drive, Part 3.”
Maintenance and Service Guide
Go to
“Flowchart
2.12—No OS
Loading,
Hard Drive, Part 3.”
2–17
Troubleshooting
Flowchart 2.12—No OS Loading, Hard Drive,
Part 3
Continued from
“Flowchart
2.11—No OS
Loading,
Hard Drive, Part 2.”
N
System
files on hard
drive?
Install OS
and reboot.
Y
Y
Y
Virus
on
hard drive?
OS
loading from
hard drive?
Clean virus.
N
Done
N
Y
Run SCANDISK and
check for
bad sectors.
Diagnostics
on diskette?
Replace
hard drive.
N
N
Can bad
sectors
be fixed?
Run diagnostics
and follow
recommendations.
Replace
hard drive.
Y
N
Boot from
hard drive?
Fix bad
sectors.
Replace
hard drive.
Y
Done
2–18
Maintenance and Service Guide
Troubleshooting
Flowchart 2.13—No OS Loading, Diskette Drive
Y
OS not loading
from
diskette drive.
Reseat
diskette drive.
OS
loading?
Done
N
Y
N
Bootable
diskette
in drive?
Nonsystem
disk message?
N
Y
N
Check diskette
for system files.
Try different
diskette.
Go to
Boot
from another
device?
“Flowchart
2.17—Nonfunctioning Device.”
Y
Y
N
Diskette
drive enabled
in the Setup
utility?
1. Replace diskette
drive.
2. Replace system
board.
Nonsystem
disk error?
Enable drive
and cold boot
computer.
N
Y
Y
Y
N
Install bootable
diskette and
reboot computer.
Is diskette
drive boot
order
correct?
Change boot
priority using
the Setup Utility.
OS
loading?
Reset the computer.
Refer to
Section 1.2,
“Resetting the
Computer,” for
Done
N
instructions.
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Maintenance and Service Guide
2–19
Troubleshooting
Flowchart 2.14—No OS Loading, Optical Drive
Y
No OS
loading from
CD-ROM or
DVD-ROM drive.
N
Install bootable
disc and
reboot
computer.
Bootable
disc in
drive?
Disc
in drive?
Y
N
Install
bootable disc.
Try another
bootable disc.
Y
Boots from
CD or DVD?
Done
N
Y
Boots from
CD or DVD?
Reseat
drive.
Done
N
N
Booting
from another
device?
Y
Y
Booting
order
correct?
N
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Reset the computer.
Refer to
Go to
Section 1.2,
“Resetting the
Computer,” for
“Flowchart
2.17—Nonfunctioning
Device.”
instructions.
Correct boot
order using
the Setup Utility.
2–20
Maintenance and Service Guide
Troubleshooting
Flowchart 2.15—No Audio, Part 1
Y
Turn up audio
internally or
externally.
No audio.
Audio?
Done
N
Y
Computer in
docking device
(if applicable)?
N
Go to
Internal
audio?
Undock
N
“Flowchart
2.16—No Audio,
Part 2.”
Y
Go to
Replace
the
docking device.
“Flowchart
2.16—No Audio,
Part 2.”
Y
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Audio?
Done
N
Maintenance and Service Guide
2–21
Troubleshooting
Flowchart 2.16—No Audio, Part 2
Continued from
“Flowchart
2.15—No Audio,
Part 1.”
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
N
Audio?
Y
Replace audio
board and
speaker
connections
in computer
(if applicable).
Y
Audio?
Done
N
1. Replace internal speakers.
2. Replace audio board (if applicable).
3. Replace system board.
2–22
Maintenance and Service Guide
Troubleshooting
Flowchart 2.17—Nonfunctioning Device
Nonfunctioning
device.
Reseat
device.
Unplug the nonfunctioning device from the computer
and inspect cables and plugs for bent or broken pins or
other damage.
Y
Clear
CMOS.
Fix or
replace
broken item.
Any physical
device detected?
N
Reattach device.
Close computer,
plug in power,
and reboot.
Go to
“Flowchart
2.9—No
Operating System
(OS) Loading.”
Replace hard drive.
N
Device
boots
properly?
N
Replace NIC.
If integrated NIC,
replace system
board.
Y
Device
boots
properly?
Y
Done
Maintenance and Service Guide
Replace diskette
drive.
Done
2–23
Troubleshooting
Flowchart 2.18—Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect computer
to good external
keyboard.
N
External
device
works?
Replace
system
board.
Y
Reseat internal
keyboard
connector
(if applicable).
N
Replace internal
keyboard or
cable.
OK?
Y
Y
Done
OK?
Done
N
Replace
system
board.
2–24
Maintenance and Service Guide
Troubleshooting
Flowchart 2.19—Nonfunctioning Pointing
Device
Pointing device
not operating
properly.
Connect computer
to good external
pointing device.
N
Replace
system
board.
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
N
Replace internal
pointing device
or cable.
OK?
Y
Y
Done
OK?
Done
N
Replace
system
board.
Maintenance and Service Guide
2–25
Troubleshooting
Flowchart 2.20—No Network/Modem
Connection
No network
or modem
connection.
N
Network
or modem jack
active?
Replace jack
or have jack
activated.
Y
Y
Connect
to nondigital
line.
Digital
line?
N
Y
N
NIC/modem
configured
in OS?
Reload
drivers and
reconfigure.
Done
OK?
N
Y
Disconnect all
power from
the computer
and open.
Replace the
NIC/modem
(if applicable).
Y
Reseat NIC/modem
(if applicable).
OK?
Done
N
Replace
system
board.
2–26
Maintenance and Service Guide
3
Software Updates and
Recovery
3.1 Software Updates
To stay current with the newest technology and maintain optimal
performance, install the latest versions of HP software on your
computer as they become available.
To update HP software:
1. Identify your computer model, product category, and series
or family. Prepare for a system ROM update by identifying
the ROM version currently installed on the computer. For
more information, refer to “Accessing Computer
Information.”
Ä
CAUTION: If your computer is connected to a network, it is
recommended that you consult with your network administrator before
installing any software updates, especially system ROM updates.
computer system ROM stores the BIOS software. The
✎ The
BIOS initializes the operating system, determines how the
computer will interact with the hardware devices, and provides
for data transfer among hardware devices, including the time
and date.
2. Access the updates through the HP Web site
(http://www.hp.com) or the Support Software CD (purchased
separately). For information about obtaining the Support
Software CD, refer to “Obtaining the Support Software CD.”
3. Install the updates.
Maintenance and Service Guide
3–1
Software Updates and Recovery
Accessing Computer Information
Before you access the updates for your computer, collect the
following information:
■
The product category is Notebook.
■
The product family name and series number are printed on
the display bezel.
■
Model information is provided on the serial number label on
the bottom of the computer.
To determine whether available ROM updates contain later ROM
versions than those currently installed on the computer, you need
to know the version of the system ROM currently installed.
ROM version information (also known as ROM date and System
BIOS) can be displayed by pressing fn+esc (if you are already in
Microsoft Windows) or by opening Computer Setup.
To use Computer Setup for displaying ROM information:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner of
the screen.
2. Use the arrow keys to select File > System Information, and
then press enter.
ROM date information is displayed.
3. To exit Computer Setup, use the arrow keys to select File >
Ignore changes and exit. Then follow the instructions on the
screen.
3–2
Maintenance and Service Guide
Software Updates and Recovery
Obtaining the Support Software CD
The Support Software CD provides HP software updates and
installation instructions. The CD includes device drivers, ROM
updates, and utilities.
To purchase the current Support Software CD or a subscription
that provides both the current version and future versions of
the CD, visit the HP Web site at http://www.hp.com.
Software Updates and the HP Web Site
Most software on the HP Web site is packaged in compressed
files called SoftPaqs. Some ROM updates may be packaged in
compressed files called ROMPaqs.
Most download packages contain a file named Readme.txt. A
Readme.txt file contains information regarding installing and
troubleshooting the file. The Readme.txt files included with
ROMPaqs are provided in English only.
Maintenance and Service Guide
3–3
Software Updates and Recovery
Downloading a ROM Update
Ä
CAUTION: To prevent damage to the computer or an unsuccessful
installation, download and install a ROM update only when the computer
is connected to reliable external power using the AC adapter. Do not
download or install a ROM update while the computer is running on
battery power, docked in an optional docking device, or connected to an
optional power source. During the download and installation:
■ Do not disconnect power from the computer by unplugging the
power cord from the AC outlet.
■ Do not shut down the computer or initiate standby or hibernation.
■ Do not insert, remove, connect, or disconnect any device, cable,
or cord.
To download a ROM update:
1. Access the page on the HP Web site that provides software
for your computer:
❏ Select Start > Help and Support, and then click a
software update link.
– or –
❏ Visit the HP Web site at http://www.hp.com/support.
2. Follow the instructions on the screen to identify your
computer and access the ROM update you want to download.
3. At the download area:
a. Identify the ROM update that is later than the ROM
version currently installed on your computer. Make a note
of the date, name, or other identifier. You may need this
information to locate the update later, after it has been
downloaded to your hard drive.
b. Follow the instructions on the screen to download your
selection to the hard drive.
a note of the path to the location on your hard
✎ Make
drive where the ROM package will be downloaded.
You may need to access the ROM package after it has
been downloaded.
3–4
Maintenance and Service Guide
Software Updates and Recovery
Installing a ROM Update
is connected to a network, it is recommended
✎ Ifthatyouryoucomputer
consult with your network administrator before
installing any software updates, especially system ROM
updates.
ROM installation procedures vary. Follow any instructions that
are displayed on the screen after the download is complete. If no
instructions are displayed:
To install a ROM update:
1. Open Windows Explorer by selecting Start > All
Programs > Accessories > Windows Explorer.
2. In the left pane of the Windows Explorer window:
a. Click My Computer and then your hard drive
designation. (The hard drive designation is typically
Local Disk C.)
b. Open the folder on your hard drive that contains the
update.
the path you made a note of before you
✎ Follow
downloaded the update.
3. Double-click the file with an .exe extension (for example,
filename.exe).
The ROM installation begins.
4. Complete the installation by following the instructions on the
screen.
a message on the screen reports a successful installation,
✎ After
you may delete the downloaded file from your hard drive.
Maintenance and Service Guide
3–5
Software Updates and Recovery
Downloading Other Software
To download and install software other than a ROM update:
1. Access the page on the HP Web site that provides software
for your computer:
❏ Select Start > Help and Support, and then click a
software update link.
– or –
❏ Visit the HP Web site at http://www.hp.com/support and click
Download drivers and software to download the
software for your computer model.
2. Follow the instructions on the screen to find the software you
want to update.
3. At the download area, select the software you want and
follow the download instructions on the Web page.
a note of the path to the location on your hard drive
✎ Make
where the ROM package will be downloaded. You may
need to access the ROM package after it has been
downloaded.
4. When the download is complete, open Windows Explorer by
selecting Start > All Programs > Accessories > Windows
Explorer.
3–6
Maintenance and Service Guide
Software Updates and Recovery
5. In the left pane of the Windows Explorer window, click
My Computer and then your hard drive designation. (The
hard drive designation is typically Local Disk C.)
the path you made a note of earlier to the folder on
✎ Follow
your hard drive that contains the update.
6. Open the folder and double-click the file with an .exe
extension (for example, filename.exe).
The installation begins.
7. Complete the installation by following the instructions on the
screen.
a message on the screen reports a successful installation,
✎ After
you may delete the download package from your hard drive.
Maintenance and Service Guide
3–7
Software Updates and Recovery
3.2 System Recovery
The computer system recovery process provides several ways to
recover optimal system functionality. For best results, attempt to
recover optimal computer functionality by using the following
procedures in the order described here.
Safeguarding Your Data
Software or devices added to the computer can cause your system
to become unstable. To safeguard your documents, store personal
files in the My Documents folder and periodically create a
backup copy of the My Documents folder.
Altiris Local Recovery
Altiris Local Recovery is a preloaded application that protects the
files on your computer by storing copies of files, called
snapshots. If files on your computer are accidentally deleted or
corrupted, you can easily restore the files yourself. You can also
restore your complete file system to a previous state.
Altiris Local Recovery provides protection of files by backing up
files to a hidden Altiris recovery partition. When you install the
software, the Recovery Agent Partition Wizard guides you
through the process of creating the recovery partition. After the
partition is created, the computer restarts and creates the first
snapshot. After the snapshot is created, the computer restarts,
making the snapshot available for recovery through Windows.
By default, Local Recovery automatically takes snapshots of your
files on a regular basis. You can change the snapshot schedule.
For more information, refer to the Altiris Local Recovery Help.
To access your snapshots in the Altiris Recovery Agent folder:
1. Right-click the Altiris Recovery Agent icon on your desktop.
2. Click Open.
3–8
Maintenance and Service Guide
Software Updates and Recovery
To restore one of the listed snapshots, drag the snapshot file to the
appropriate location on your hard drive.
For more information on configuring and using Altiris Local
Recovery, visit the HP Web site at http://www.hp.com/go/easydeploy,
or open the software and click Help on the menu bar.
Using System Restore Points
System Restore is an operating system feature that allows you to
reverse undesirable changes to your computer by restoring the
computer to an earlier state, called a restore point. A restore point
is a “snapshot” of your software, drivers, and operating system
files at a particular time. The computer automatically creates
restore points at regular intervals and may create additional
restore points when you change your personal settings or add
software or hardware.
You can manually create additional restore points to provide
increased protection for your system files and settings. It is
recommended that you manually create restore points
■
Before you add or extensively modify software or hardware.
■
Periodically, whenever the system is performing optimally.
Restoring to any restore point does not affect your data files. For
example, restoring your system software to an earlier state will
not affect documents or e-mails that you saved after that time.
you do not like the results of your restoration, you can
✎ Ifreverse
the restoration.
Maintenance and Service Guide
3–9
Software Updates and Recovery
Creating a System Restore Point
To create a system restore point:
1. Select Start > Help and Support.
2. Click System Restore.
The System Restore window opens.
3. Click Create a restore point, and then click Next.
4. Follow the on-screen instructions.
Restoring to a Restore Point
To restore the computer to a previous date and time when it was
functioning optimally:
1. Select Start > Help and Support.
2. Click System Restore.
The System Restore window opens.
3. Click Restore my computer to an earlier time, and then
click Next.
4. Follow the on-screen instructions.
3–10
Maintenance and Service Guide
Software Updates and Recovery
Reinstalling Applications
Applications preinstalled or preloaded on your computer can be
reinstalled by using the Recovery disc or a third-party software
disc.
cases, the applications preloaded on your computer,
✎ Insuchmostas those
available in the Software Setup Utility, can be
reinstalled from your hard drive. To access the Software Setup
Utility, select Start > All Programs > Software Setup.
The application reinstallation process replaces corrupted system
files within the application and reinstalls deleted system files
within the application.
■
In most cases: If the application you are reinstalling is still
installed on your computer, the reinstallation process does
not affect your settings within the application.
■
In all cases: If an application has been deleted from your
computer, the reinstallation process reinstalls the application
or utility to the factory image but cannot restore your
personal settings.
Reinstalling Applications from the Hard Drive
To reinstall a preloaded application or utility from your hard
drive:
1. Select Start > All Programs > Software Setup, and then
follow the instructions on the screen.
2. When you are prompted to select the software you want to
reinstall, select or clear the appropriate check boxes.
Maintenance and Service Guide
3–11
Software Updates and Recovery
Reinstalling Applications from Discs
To reinstall applications from discs:
1. Insert the disc into the optical drive.
❏ If autorun is enabled, an installation wizard opens.
❏ If autorun is disabled, select Start > Run. Enter
x:\setup.exe
where x is your optical drive designation
and then select OK.
2. When the installation wizard opens, follow the installation
instructions on the screen.
3. Restart the computer if prompted.
Repairing the Operating System
To attempt an operating system repair without deleting your
personal data, use the Operating System disc that was shipped
with the computer:
computer does not have an optical drive, you may need
✎ Ifto your
connect to an optional external MultiBay.
1. Connect the computer to external power through the
AC adapter and turn on the computer.
2. Immediately insert the Operating System disc into the
computer.
3. Press and hold the power button for at least 5 seconds to turn
off the computer.
4. Press the power button again to turn on the computer.
5. When prompted, press any key to start from the disc.
3–12
Maintenance and Service Guide
Software Updates and Recovery
After a few minutes, you may need to select your language,
and then the Setup Wizard opens.
On the “Welcome to Setup” page, do not press R (step 8 in
✎ this
procedure) until you have completed steps 6 and 7.
6. Press enter to continue.
A licensing agreement page is displayed.
7. Press f8 to accept the agreement and continue.
The “Setup” page is displayed.
8. Press R to repair the selected Windows installation.
The repair process begins. This process takes 1 to 2 hours to
complete.
The computer restarts in Windows after the process is complete.
Maintenance and Service Guide
3–13
Software Updates and Recovery
Reinstalling the Operating System
Ä
CAUTION: To protect your personal data and the software installed
on the computer, back up your data before reinstalling the operating
system. See the Windows online Help utility to learn more about
backing up your files. Select Start > Help and Support. Then type
“backup” in the Search box.
the reinstallation, you may be prompted for your
✎ During
Product Key. Your Product Key is provided on the Microsoft
Certificate of Authenticity label on the bottom of the computer.
If other recovery efforts do not successfully repair the operating
system, you can reinstall it.
To reinstall the operating system:
computer does not have an optical drive, you may need
✎ Ifto your
connect to an optional external MultiBay.
1. Connect the computer to external power through the
AC adapter and turn on the computer.
2. Immediately insert the Operating System disc into the
computer.
3. Press and hold the power button for at least 5 seconds to turn
off the computer.
3–14
Maintenance and Service Guide
Software Updates and Recovery
4. Press the power button again to turn on the computer.
5. When prompted, press any key to start from the disc.
After a few minutes, you may need to select your language,
and then the Setup Wizard opens.
6. Press enter to continue.
A licensing agreement page is displayed.
7. Press f8 to accept the agreement and continue.
The “Setup” page is displayed.
8. Press esc to continue installing a new copy of the operating
system instead of repairing it.
9. Press enter to set up the operating system.
10. Press C to continue setup using this partition.
11. Select Format the partition using the NTFS file system
(Quick), and then press enter.
Ä Formatting this drive deletes all current files.
12. Press F to format the drive.
The reinstallation process begins. This process takes
1 to 2 hours to complete.
The computer restarts in Windows when the process is complete.
Maintenance and Service Guide
3–15
Software Updates and Recovery
Reinstalling Device Drivers and Other
Software
After the operating system installation process is complete, you
must reinstall drivers.
To reinstall drivers, use the Recovery disc included with the
computer:
1. While running Windows, insert the Recovery disc into the
optical drive.
2. If you do not have autorun enabled:
a. Select Start > Run.
b. Then type D:\SWSETUP\APPINSTL\SETUP.EXE
where D indicates the optical drive.
3. Follow the on-screen instructions for installing the drivers.
After the drivers are reinstalled, you must reinstall any software
you added to the computer. Follow the installation instructions
provided with the software.
3–16
Maintenance and Service Guide
4
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers.
4.1 Serial Number Location
When ordering parts or requesting information, provide the
computer serial number and model number located on the bottom
of the computer.
Serial Number Location
Maintenance and Service Guide
4–1
Illustrated Parts Catalog
4.2 Computer Major Components
Computer Major Components
4–2
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components
Spare Part
Number
Item
Description
1
Display assemblies (include wireless antenna boards and cables)
15.0-inch, SXGA+WVA, TFT
15.0-inch, XGA, TFT
14.1-inch, XGA, TFT
2
378210-001
378209-001
378208-001
Switch covers
For use with full-featured models
For use with defeatured models
378232-001
378242-001
3
LED board (for use only with full-featured models;
includes LED board cable)
378228-001
4
Keyboards
For use with computer models with Dual Stick (Pointing Stick and
TouchPad) pointing devices:
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
Latin America
398609-201
398609-221
398609-081
398609-051
398609-121
398609-041
398609-151
398609-211
398609-DD1
398609-002
398609-BB1
398609-061
398609-291
398609-AD1
398609-161
Maintenance and Service Guide
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
398609-091
398609-131
398609-251
398609-171
398609-231
398609-BA1
398609-071
398609-101
398609-111
398609-AB1
398609-281
398609-141
398609-031
398609-001
4–3
Illustrated Parts Catalog
Computer Major Components
4–4
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Spare Part
Number
Item
Description
4
Keyboards (Continued)
For use with computer models with TouchPad only pointing devices:
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
378248-181
378248-201
378248-221
378248-081
378248-051
378248-121
378248-041
378248-151
378248-211
378248-DD1
378248-002
378248-BB1
378248-061
378248-291
378248-AD1
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
378248-161
378248-091
378248-131
378248-251
378248-171
378248-231
378248-BA1
378248-071
378248-101
378248-111
378248-AB1
378248-281
378248-141
378248-031
378248-001
5
Fan
378233-001
6
Heat sink (includes thermal paste)
379799-001
Maintenance and Service Guide
4–5
Illustrated Parts Catalog
Computer Major Components
4–6
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
7
Processors (include thermal paste)
8
9a
9b
9c
10
Spare Part
Number
Intel Pentium M 2.13-GHz
Intel Pentium M 2.00-GHz
Intel Pentium M 1.86-GHz
Intel Pentium M 1.73-GHz
Intel Pentium M 1.60-GHz
Intel Pentium M 1.30-GHz
378224-001
378223-001
378222-001
378221-001
378220-001
378219-001
Intel Celeron M 1.5-GHz
Intel Celeron M 1.4-GHz
Intel Celeron M 1.3-GHz
378218-001
378217-001
378216-001
Top covers (include TouchPad)
For use with computer models with Dual Stick
(Pointing Stick and TouchPad) pointing devices:
For use with full-featured models
For use with defeatured models
399109-001
Pointing stick board (not illustrated; for use only with
computer models with Dual Stick pointing devices)
399110-001
Miscellaneous Plastics Kit
378236-001
378230-001
378239-001
Includes:
RTC battery
Memory module/Mini PCI compartment cover
(includes 1 captive screw)
Hard drive cover (includes 2 captive screws)
Not illustrated:
Computer feet
PC Card slot space savers (2)
Modem board
Maintenance and Service Guide
325521-001
4–7
Illustrated Parts Catalog
Computer Major Components
4–8
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
11
Memory modules (400-MHz DDR2)
Spare Part
Number
1024 MB
512 MB
256 MB
128 MB
336579-001
336578-001
336577-001
336576-001
12
Speaker
378237-001
13
USB/audio board (for use only with full-featured
models; includes audio board cable, and
USB board cable)
Audio board (for use only with defeatured models;
includes audio board cable)
378226-001
14
378241-001
System boards
For use with full-featured models
For use with defeatured models-GML
For use with defeatured models-GM
378225-001
378238-001
383219-001
15
Digital media board (for use only with full-featured
models; includes digital media board cable)
378229-001
16
Base enclosure
17
For use with full-featured models
For use with defeatured models
378231-001
378240-001
Serial connector module (for use only with
full-featured models; includes serial connector
board cable)
378227-001
Maintenance and Service Guide
4–9
Illustrated Parts Catalog
Computer Major Components
4–10
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Item
Description
18
Mini PCI communications modules
19
Spare Part
Number
802.11b WLAN card, for use in most of the world
802.11b WLAN card, for use in the rest of the world
381580-001
381581-001
802.11b/g WLAN card, for use in most of the world
802.11b/g WLAN card, for use in the the rest of the
world
381582-001
381583-001
802.11b/g combination WLAN card, for use
internationally
802.11b/g combination WLAN card, for use Japan
802.11b/g combination WLAN card, for use in
the United States
373032-002
802.11a/b/g combination WLAN card, for use in
Europe, Middle East, Africa
802.11a/b/g combination WLAN Mini PCI
communications card for use Japan
802.11a/b/g combination WLAN card, for use
internationally
802.11a/b/g combination WLAN card, for use Japan
802.11a/b/g combination WLAN card, for use in most
of the world
802.11a/b/g combination WLAN card, for use in
the United States
802.11a/b/g High Band combination WLAN card
373900-021
373032-291
373032-001
373900-291
373033-002
373033-291
373900-001
373033-001
373901-001
Battery packs
6-cell, 4.8-AHr
6-cell, 4.4-AHr
6-cell, 4.4-AHr
6-cell, 2.2-AHr
Maintenance and Service Guide
367457-001
372772-001
383220-001
364602-001
4–11
Illustrated Parts Catalog
Computer Major Components
4–12
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer Major Components (Continued)
Spare Part
Number
Item
Description
20
Optical drives (include bezel)
24X Max CD-ROM drive
8X Max DVD-ROM drive
8X Max DVD±RW and CD-RW Combo Drive
4X Max DVD±RW and CD-RW Combo Drive
2X Max DVD±RW and CD-RW Combo Drive
DVD/CD-RW Combo Drive
DVD±RW and CD-RW Double Layer Combo Drive
DVD±RW and CD-RW Combo Drive
380768-001
380770-001
380773-001
380771-001
375557-001
380772-001
398608-001
403093-001
21
Broadcomm Bluetooth® wireless board (includes
Bluetooth board cable)
367871-001
22
Hard drives (include frame and connector)
5400-rpm
80-GB
60-GB
40-GB
380108-001
378215-001
380107-001
Maintenance and Service Guide
4200-rpm
80-GB
60-GB
40-GB
30-GB
378214-001
378213-001
378212-001
378211-001
4–13
Illustrated Parts Catalog
4.3 Miscellaneous Plastics Kit
Table 3-2
Miscellaneous Plastics Kit
Spare Part Number Information
Item
Spare Part
Number
Description
Miscellaneous Plastics Kit
Includes:
378236-001
1
Memory module/Mini PCI compartment cover
(includes 1 captive screw)
2
Hard drive cover (includes 2 captive screws)
3
RTC battery
4
Computer feet (4)
5
PC Card slot space savers (2)
4–14
Maintenance and Service Guide
Illustrated Parts Catalog
4.4 Miscellaneous Cable Kit
Table 3-3
Miscellaneous Cable Kit
Spare Part Number Information
Item
Description
Miscellaneous Cable Kit
Includes:
1
Bluetooth board cable
2
LED board cable
3
RJ-11 connector module and cable
4
Audio board cable
5
USB board cable
6
Serial connector module cable
Maintenance and Service Guide
381709-001
4–15
Illustrated Parts Catalog
4.5 Mass Storage Devices
4–16
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-4
Mass Storage Devices
Spare Part Number Information
Spare Part
Number
Item
Description
1
Hard drives (include frame and connector)
5400-rpm
80-GB
60-GB
40-GB
2
380108-001
378215-001
380107-001
4200-rpm
80-GB
60-GB
40-GB
30-GB
378214-001
378213-001
378212-001
378211-001
Optical drives (include bezel)
24X Max CD-ROM drive
8X Max DVD-ROM drive
8X Max DVD±RW and CD-RW Combo Drive
4X Max DVD±RW and CD-RW Combo Drive
2X Max DVD±RW and CD-RW Combo Drive
DVD/CD-RW Combo Drive
DVD±RW and CD-RW Double Layer Combo Drive
DVD±RW and CD-RW Combo Drive
Maintenance and Service Guide
380768-001
380770-001
380773-001
380771-001
375557-001
380772-001
398608-001
403093-001
4–17
Illustrated Parts Catalog
4.6 Miscellaneous (Not Illustrated)
Table 3-5
Miscellaneous (Not Illustrated)
Spare Part Information
Description
Spare Part
Number
65 watt AC adapter
239704-001
HP Advanced Docking Station
374804-001
HP Docking Station
374803-001
Docking Device Miscellaneous Plastics Kit
380089-001
Carrying cases
Nylon top load
Nylon entry-level
325815-001
and
325815-002
325814-001
External MultiBay cradle
366143-001
External MultiBay cradle power cable and stand
366144-001
MultiBay 24X DVD/CD-RW Combo Drive
373315-001
MultiBay 8X DVD-ROM Drive
373314-001
MultiBay hard drive, 80-GB, 5400-rpm
375198-001
8-cell travel battery
367456-001
USB 1.1 diskette drive
359118-001
4–18
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-5
Miscellaneous (Not Illustrated)
Spare Part Information (Continued)
Spare Part
Number
Description
Screw Kit (includes the following screws; refer to
Appendix C, “Screw Listing,” for more information on
specifications and usage
■ Hex socket HM5.0×9.0 screw lock
■ Phillips PM2.5×13.0 spring-loaded
screw
■ Phillips PM2.5×4.0 shoulder screw
■ Phillips PM2.5×4.0 screw
■ Phillips PM2.0×8.0 shoulder screw
■ Phillips PM2.0×7.0 screw
Maintenance and Service Guide
■
■
■
■
■
■
■
378235-001
Phillips PM2.0×4.0 screw
Phillips PM2.0×3.0 screw
Phillips PM1.5×4.0 screw
Phillips PM1.5×3.5 screw
Torx8 T8M2.0×9.0 screw
Torx8 T8M2.0×4.0 screw
Torx8 T8M2.0×2.0 screw
4–19
Illustrated Parts Catalog
Table 3-5
Miscellaneous (Not Illustrated)
Spare Part Information (Continued)
Spare Part
Number
Description
Power cords
For use in:
Australia and New Zealand
246959-011
Belgium, Europe, Finland, France, Germany, Greece,
the Netherlands, Norway, Portugal, Spain, and Sweden
246959-021
Brazil
246959-201
Canada, French Canada, Latin America, Taiwan,
Thailand, and the United States
246959-001
Denmark
246959-081
Hong Kong and the United Kingdom
246959-031
Israel
246959-BB1
Italy
246959-061
Japan
246959-291
Korea
246959-AD1
Sweden
246959-AG1
4–20
Maintenance and Service Guide
Illustrated Parts Catalog
4.7 Sequential Part Number Listing
Table 3-6
Sequential Part Number Listing
Spare Part
Number
Description
239704-001
65-watt AC adapter
246959-001
Power cord for use in Canada, French Canada, Latin America,
Taiwan, Thailand, and the United States
246959-011
Power cord for use in Australia and New Zealand
246959-021
Power cord for use in Belgium, Europe, Finland, France,
Germany, Greece, the Netherlands, Norway, Portugal, Spain,
and Sweden
246959-031
Power cord for use in Hong Kong and the United Kingdom
246959-061
Power cord for use in Italy
246959-081
Power cord for use in Denmark
246959-201
Power cord for use in Brazil
246959-291
Power cord for use in Japan
246959-AD1
Power cord for use in Korea
246959-AG1
Power cord for use in Sweden
246959-BB1
Power cord for use in Israel
325521-001
Modem board
325814-001
Nylon entry-level carrying case
325815-001
Nylon top load carrying case
325815-002
Nylon top load carrying case
336576-001
128-MB memory module, 400-MHz DDR2
336577-001
256-MB memory module, 400-MHz DDR2
336578-001
512-MB memory module, 400-MHz DDR2
Maintenance and Service Guide
4–21
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
336579-001
1024-MB memory module, 400-MHz DDR2
359118-001
USB 1.1 diskette drive
364602-001
6-cell, 2.2-AHr battery pack
366143-001
External MultiBay cradle
366144-001
External MultiBay cradle power cable and stand
367456-001
8-cell travel battery
367457-001
6-cell, 4.8-AHr battery pack
367871-001
Broadcomm Bluetooth wireless board, includes cable
372772-001
6-cell, 4.4-AHr battery pack
373032-001
802.11b/g combination WLAN Mini PCI communications card
for use in the United States
373032-002
802.11b/g combination WLAN Mini PCI communications card
for use internationally
373032-291
802.11b/g combination WLAN Mini PCI communications card
for use Japan
373033-001
802.11a/b/g combination WLAN card Mini PCI
communications card for use in the United States
373033-002
802.11a/b/g combination WLAN Mini PCI communications
card for use internationally
373033-291
802.11a/b/g combination WLAN Mini PCI communications
card for use in Japan
373314-001
MultiBay 8X DVD-ROM Drive
373315-001
MultiBay 24X DVD/CD-RW Combo Drive
373900-001
802.11a/b/g combination WLAN card Mini PCI
communications card for use in most of the world
4–22
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
373900-021
802.11a/b/g combination WLAN Mini PCI communications
card for use Europe, Middle East, and Africa
373900-291
802.11a/b/g combination WLAN Mini PCI communications
card for use Japan
373901-001
802.11a/b/g High Band combination WLAN Mini PCI
communications card
374803-001
HP Docking Station
374804-001
HP Advanced Docking Station
375198-001
MultiBay hard drive, 80-GB, 5400-rpm
375557-001
2X Max DVD±RW and CD-RW Combo Drive, includes bezel
378208-001
14.1-inch, XGA, TFT, display assembly, includes wireless
antenna boards and cables
378209-001
15.0-inch, XGA, TFT, display assembly, includes wireless
antenna boards and cables
378210-001
15.0-inch, SXGA+WVA, TFT display assembly, includes
wireless antenna boards and cables
378211-001
30-GB hard drive, 4200-rpm, includes frame and connector
378212-001
40-GB hard drive, 4200-rpm, includes frame and connector
378213-001
60-GB hard drive, 4200-rpm, includes frame and connector
378214-001
80-GB hard drive, 4200-rpm, includes frame and connector
378215-001
60-GB hard drive, 5400-rpm, includes frame and connector
378216-001
Intel Celeron M 1.3-GHz processor, includes thermal paste
378217-001
Intel Celeron M 1.4-GHz processor, includes thermal paste
378218-001
Intel Celeron M 1.5-GHz processor, includes thermal paste
378219-001
Intel Pentium M 1.30-GHz processor, includes thermal paste
Maintenance and Service Guide
4–23
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
378220-001
Intel Pentium M 1.60-GHz processor, includes thermal paste
378221-001
Intel Pentium M 1.73-GHz processor, includes thermal paste
378222-001
Intel Pentium M 1.86-GHz processor, includes thermal paste
378223-001
Intel Pentium M 2.00-GHz processor, includes thermal paste
378224-001
Intel Pentium M 2.13-GHz processor, includes thermal paste
378225-001
System board, for use only with full-featured models
378226-001
USB/audio board, includes audio board cable and
USB board cable, for use only with full-featured models
378227-001
Serial connector board, includes serial connector board cable
378228-001
LED board, includes LED board cable
378229-001
Digital media board, includes digital media board cable
378230-001
Top cover, includes TouchPad, for use only with full-featured
models
378231-001
Base enclosure, for use only with full-featured models
378232-001
Switch cover, for use only with full-featured models
378233-001
Fan
378235-001
Miscellaneous Screw Kit
378236-001
Miscellaneous Plastics Kit
378237-001
Speaker
378238-001
System board, for use only with defeatured models (GML)
378239-001
Top cover, includes TouchPad, for use only with defeatured
models
378240-001
Base enclosure, for use only with defeatured models
4–24
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
378241-001
Audio board, includes audio cable, for use only with defeatured
models
378242-001
Switch cover, for use only with defeatured models
378248-001
Keyboard for use in United States
378248-002
Keyboard for use internationally
378248-031
Keyboard for use in United Kingdom
378248-041
Keyboard for use in Germany
378248-051
Keyboard for use in France
378248-061
Keyboard for use in Italy
378248-071
Keyboard for use in Spain
378248-081
Keyboard for use in Denmark
378248-091
Keyboard for use in Norway
378248-101
Keyboard for use in Sweden
378248-111
Keyboard for use in Switzerland
378248-121
Keyboard for use in French Canada
378248-131
Keyboard for use in Portugal
378248-141
Keyboard for use in Turkey
378248-151
Keyboard for use in Greece
378248-161
Keyboard for use in Latin America
378248-171
Keyboard for use in Saudi Arabia
378248-181
Keyboard for use in Belgium
378248-201
Keyboard for use in Brazil
378248-211
Keyboard for use in Hungary
Maintenance and Service Guide
4–25
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
378248-221
Keyboard for use in the Czech Republic
378248-231
Keyboard for use in Slovakia
378248-251
Keyboard for use in Russia
378248-281
Keyboard for use in Thailand
378248-291
Keyboard for use in Japan
378248-AB1
Keyboard for use in Taiwan
378248-AD1
Keyboard for use in Korea
378248-BA1
Keyboard for use in Slovenia
378248-BB1
Keyboard for use in Israel
378248-DD1
Keyboard for use in Iceland
379799-001
Heat sink, includes thermal paste
380089-001
Docking Station Miscellaneous Plastics Kit
380108-001
80-GB hard drive, 5400-rpm, includes frame and connector
380768-001
24X Max CD-ROM drive, includes bezel
380770-001
8X Max DVD-ROM drive, includes bezel
380771-001
4X Max DVD±RW and CD-RW Combo Drive, includes bezel
380772-001
DVD/CD-RW Combo Drive, includes bezel
380773-001
8X Max DVD±RW and CD-RW Combo Drive, includes bezel
381580-001
802.11b/g WLAN Mini PCI communications card for use
in most of the world
381581-001
802.11b/g WLAN Mini PCI communications card for use in the
rest of the world
381582-001
802.11b/g WLAN Mini PCI communications card for use
in most of the world
4–26
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
381583-001
802.11b/g WLAN Mini PCI communications card for use in the
rest of the world
381709-001
Miscellaneous Cable Kit
383219-001
System board, for use only with defeatured models (GM)
383220-001
6-cell, 4.0-AHr battery pack
378242-001
Switch cover, for use only with defeatured models
398608-001
DVD±RW and CD-RW Double Layer Combo Drive
398609-001
Keyboard for use in United States
398609-002
Keyboard for use internationally
398609-031
Keyboard for use in United Kingdom
398609-041
Keyboard for use in Germany
398609-051
Keyboard for use in France
398609-061
Keyboard for use in Italy
398609-071
Keyboard for use in Spain
398609-081
Keyboard for use in Denmark
398609-091
Keyboard for use in Norway
398609-101
Keyboard for use in Sweden
398609-111
Keyboard for use in Switzerland
398609-121
Keyboard for use in French Canada
398609-131
Keyboard for use in Portugal
398609-141
Keyboard for use in Turkey
398609-151
Keyboard for use in Greece
398609-161
Keyboard for use in Latin America
Maintenance and Service Guide
4–27
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
398609-171
Keyboard for use in Saudi Arabia
398609-201
Keyboard for use in Brazil
398609-211
Keyboard for use in Hungary
398609-221
Keyboard for use in the Czech Republic
398609-231
Keyboard for use in Slovakia
398609-251
Keyboard for use in Russia
398609-281
Keyboard for use in Thailand
398609-291
Keyboard for use in Japan.
398609-AB1
Keyboard for use in Taiwan
398609-AD1
Keyboard for use in Korea
398609-BA1
Keyboard for use in Slovenia
398609-BB1
Keyboard for use in Israel
398609-DD1
Keyboard for use in Iceland
399109-001
Top cover, includes TouchPad, for use only with computer
models with Dual Stick (Pointing Stick and TouchPad) pointing
devices
399110-001
Pointing stick board (for use only with computer models with
Dual Stick pointing devices)
403093-001
DVD±RW and CD-RW Combo Drive
4–28
Maintenance and Service Guide
5
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and
safe removal and replacement service.
5.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■ Magnetic screwdriver
■ Phillips P0 screwdriver
■ Torx8 screwdriver
■ 5.0-mm socket for system board locks
■ Flat-bladed screwdriver
■ Tool kit—includes connector removal tool, loopback plugs,
and case utility tool
Maintenance and Service Guide
5–1
Removal and Replacement Preliminaries
5.2 Service Considerations
The following sections include some of the considerations
that you should keep in mind during disassembly and assembly
procedures.
you remove each subassembly from the computer, place
✎ As
the subassembly (and all accompanying screws) away from
the work area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can
damage plastic parts. Use care when handling the plastic parts.
Apply pressure only at the points designated in the maintenance
instructions.
Cables and Connectors
Ä
CAUTION: When servicing the computer, ensure that cables are
placed in their proper locations during the reassembly process.
Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage.
Apply only the tension required to unseat or seat the cables
during removal and insertion. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing cables. Ensure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; these cables
tear easily.
5–2
Maintenance and Service Guide
Removal and Replacement Preliminaries
5.3 Preventing Damage to
Removable Drives
Removable drives are fragile components that must be handled
with care. To prevent damage to the computer, damage to a
removable drive, or loss of information, observe the following
precautions:
■ Before removing or inserting a hard drive, shut down the
computer. If you are unsure whether the computer is off or
in hibernation, turn the computer on, and then shut it down
through the operating system.
■ Before removing a diskette drive or optical drive, ensure that
a diskette or disc is not in the drive and ensure that the optical
drive tray is closed.
■ Before handling a drive, ensure that you are discharged of
static electricity. While handling a drive, avoid touching the
connector.
■ Handle drives on surfaces covered with at least one inch of
shock-proof foam.
■ Avoid dropping drives from any height onto any surface.
■ After removing a hard drive, an optical drive, or a diskette
drive, place it in a static-proof bag.
■ Avoid exposing a hard drive to products that have magnetic
fields, such as monitors or speakers.
■ Avoid exposing a drive to temperature extremes or liquids.
■ If a drive must be mailed, place the drive in a bubble pack
mailer or other suitable form of protective packaging and label
the package “FRAGILE: Handle With Care.”
Maintenance and Service Guide
5–3
Removal and Replacement Preliminaries
5.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic
discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits
provide some protection, but in many cases, the discharge
contains enough power to alter device parameters or melt
silicon junctions.
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge might not
be affected at all and can work perfectly throughout a normal
cycle. Or the device might function normally for a while, then
degrade in the internal layers, reducing its life expectancy.
5–4
Maintenance and Service Guide
Removal and Replacement Preliminaries
5.5 Packaging and Transporting
Precautions
Use the following grounding precautions when packaging and
transporting equipment:
■ To avoid hand contact, transport products in static-safe
containers, such as tubes, bags, or boxes.
■ Protect all electrostatic-sensitive parts and assemblies with
conductive or approved containers or packaging.
■ Keep electrostatic-sensitive parts in their containers until
the parts arrive at static-free workstations.
■ Place items on a grounded surface before removing items
from their containers.
■ Always be properly grounded when touching a sensitive
component or assembly.
■ Store reusable electrostatic-sensitive parts from assemblies
in protective packaging or nonconductive foam.
■ Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
Maintenance and Service Guide
5–5
Removal and Replacement Preliminaries
5.6 Workstation Precautions
Use the following grounding precautions at workstations:
■ Cover the workstation with approved static-shielding material
(refer to Table 4-2, “Static-Shielding Materials”).
■ Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■ Use conductive field service tools, such as cutters,
screwdrivers, and vacuums.
■ When fixtures must directly contact dissipative surfaces, use
fixtures made only of static-safe materials.
■ Keep the work area free of nonconductive materials, such
as ordinary plastic assembly aids and Styrofoam.
■ Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
■ Avoid contact with pins, leads, or circuitry.
■ Turn off power and input signals before inserting or removing
connectors or test equipment.
5–6
Maintenance and Service Guide
Removal and Replacement Preliminaries
5.7 Grounding Equipment and
Methods
Grounding equipment must include either a wrist strap or a
foot strap at a grounded workstation.
■ When seated, wear a wrist strap connected to a grounded
system. Wrist straps are flexible straps with a minimum of
one megohm ±10% resistance in the ground cords. To provide
proper ground, wear a strap snugly against the skin at all times.
On grounded mats with banana-plug connectors, use alligator
clips to connect a wrist strap.
■ When standing, use foot straps and a grounded floor mat.
Foot straps (heel, toe, or boot straps) can be used at standing
workstations and are compatible with most types of shoes
or boots. On conductive floors or dissipative floor mats, use
foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective,
the conductive strips must be worn in contact with the skin.
Other grounding equipment recommended for use in preventing
electrostatic damage includes:
■ Antistatic tape
■ Antistatic smocks, aprons, and sleeve protectors
■ Conductive bins and other assembly or soldering aids
■ Nonconductive foam
■ Conductive tabletop workstations with ground cords of
one megohm resistance
■ Static-dissipative tables or floor mats with hard ties to
the ground
■ Field service kits
■ Static awareness labels
■ Material-handling packages
■ Nonconductive plastic bags, tubes, or boxes
■ Metal tote boxes
■ Electrostatic voltage levels and protective materials
Maintenance and Service Guide
5–7
Removal and Replacement Preliminaries
Table 4-1 shows how humidity affects the electrostatic voltage
levels generated by different activities.
Table 4-1
Typical Electrostatic Voltage Levels
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
✎ A product can be degraded by as little as 700 V.
Table 4-2 lists the shielding protection provided by antistatic
bags and floor mats.
Table 4-2
Static-Shielding Materials
Material
Use
Voltage Protection Level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
5–8
Maintenance and Service Guide
6
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
There are 62 screws and screw locks, in 11 different sizes, that
must be removed, replaced, or loosened when servicing the
computer. Make special note of each screw and screw lock size
and location during removal and replacement.
Refer to Appendix C, “Screw Listing” for detailed information on
screw and screw lock sizes, locations, and usage.
6.1 Serial Number
Report the computer serial number to HP when requesting
information or ordering spare parts. The serial number is
located on the bottom of the computer.
Serial Number Location
Maintenance and Service Guide
6–1
Removal and Replacement Procedures
6.2 Disassembly Sequence Chart
Use the chart below to determine the section number to be
referenced when removing computer components.
Disassembly Sequence Chart
Section
Description
6.3
Preparing the Computer for
Disassembly
Battery pack
# of Screws Removed
0
6.4
Hard Drive
2 loosened to remove the
hard drive cover
1 loosened to remove the
hard drive
6 to disassemble hard drive
6.5
Computer Feet
0
6.6
Bluetooth Board
0
6.7
External Memory Module
1 loosened to remove the
memory module/Mini PCI
compartment cover
6.8
Mini PCI Communications
Module
0
Å
6.9
6–2
To prevent an unresponsive system and the display of a
warning message, install only a Mini PCI device authorized
for use in your computer by the governmental agency that
regulates wireless devices in your country. If you install a
device and then receive a warning message, remove the
device to restore computer functionality. Then contact
Customer Care.
Optical Drive
1
Maintenance and Service Guide
Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section
Description
# of Screws Removed
6.10
Keyboard
2
6.11
Switch Cover
2
6.12
LED Board
4
6.13
Fan
2 loosened
6.14
Heat Sink
4 loosened
6.15
Processor
1 loosened
6.16
Modem Board
2
6.17
Internal Memory Module
0
6.18
RTC Battery
0
6.19
Display Assembly
6
6.20
Top Cover
15
6.21
Speaker
4
6.22
Digital Media Board
0
6.23
USB/Audio Board
1
6.24
System Board
1 screw
4 screw locks on
HP Compaq nc6110 and
nc6120 models
2 screw locks on
HP Compaq nx6110 and
nx6120 models
6.25
Serial Connector Module
2 screw locks
Maintenance and Service Guide
6–3
Removal and Replacement Procedures
6.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
Battery Pack Spare Part Number Information
6-cell, 4.8-AHr
6-cell, 4.4-AHr
6-cell, 4.4-AHr
6-cell, 2.2-AHr
6–4
367457-001
372772-001
383220-001
364602-001
Maintenance and Service Guide
Removal and Replacement Procedures
4. Remove the battery pack by following these steps:
a. Turn the computer upside down with the rear panel
toward you.
b. Slide and hold the battery pack lock latch 1 to the right.
c. Slide the battery pack release latch 2 to the right. (The
battery pack disengages from the computer.)
d. Slide the battery pack 3 straight back and remove it.
Removing the Battery Pack
Reverse the above procedure to install the battery pack.
Maintenance and Service Guide
6–5
Removal and Replacement Procedures
6.4 Hard Drive
Hard Drive Spare Part Number Information
5400-rpm
80-GB
60-GB
40-GB
380108-001
378215-001
380107-001
4200-rpm
80-GB
60-GB
40-GB
30-GB
378214-001
378213-001
378212-001
378211-001
1. Prepare the computer for disassembly (refer to Section 6.3).
2. Loosen the 2 Phillips PM2.0×4.0 screws 1 that secure the
hard drive cover to the computer.
3. Lift the left side of the hard drive cover 2 and swing it to
the right.
4. Remove the hard drive cover.
hard drive cover is included in the Miscellaneous
✎ The
Plastics Kit, spare part number 378236-001.
Removing the Hard Drive Cover
6–6
Maintenance and Service Guide
Removal and Replacement Procedures
5. Loosen the Phillips PM2.5×13.0 spring-loaded hard drive
retention screw 1.
6. Grasp the mylar tab 2 on the left side of the hard drive and
slide the hard drive to the right 3 to disconnect it from the
system board.
7. Remove the hard drive 4 from the hard drive bay.
Removing the Hard Drive
Maintenance and Service Guide
6–7
Removal and Replacement Procedures
8. Remove the 2 Phillips PM2.5×4.0 hard drive frame shoulder
screws 1 from each side of the hard drive.
9. Remove the 2 Phillips PM2.5×4.0 hard drive frame screws 2
from each side of the hard drive.
10. Remove the 2 Phillips PM1.5×3.5 hard drive frame screws 3
from the front of the hard drive.
11. Lift the frame 4 straight up to remove if from the hard drive.
12. Remove the hard drive connector 5 from the hard drive.
Removing the Hard Drive Frame and Connector
Reverse the above procedure to reassemble and install the
hard drive.
6–8
Maintenance and Service Guide
Removal and Replacement Procedures
6.5 Computer Feet
The computer feet are adhesive-backed rubber pads. The feet are
included in the Miscellaneous Plastics Kit, spare part number
378236-001.
Replacing the Computer Feet
Maintenance and Service Guide
6–9
Removal and Replacement Procedures
6.6 Bluetooth Board
Bluetooth Board Spare Part Number Information
Broadcomm Bluetooth wireless board (includes Bluetooth
board cable)
367871-001
1. Prepare the computer for disassembly (refer to Section 6.3).
2. Remove the hard drive (Section 6.4).
6–10
Maintenance and Service Guide
Removal and Replacement Procedures
3. Slide the Bluetooth board 1 out of the clip in the hard drive
compartment.
4. Disconnect the Bluetooth board cable 2 from the board.
Removing the Bluetooth Board
Reverse the above procedure to install a Bluetooth board.
Maintenance and Service Guide
6–11
Removal and Replacement Procedures
6.7 External Memory Module
Memory Module Spare Part Number Information
1024 MB
512 MB
256 MB
128 MB
336579-001
336578-001
336577-001
336576-001
1. Prepare the computer for disassembly (refer to Section 6.3).
2. Position the computer with the front toward you.
3. Loosen the Phillips PM2.0×4.0 screw 1 that secures the
memory module/Mini PCI compartment cover to the
computer.
4. Lift the rear edge of the cover 2 up and swing it toward you.
5. Remove the memory module/Mini PCI compartment cover.
memory module/Mini PCI compartment cover is included in
✎ The
the Miscellaneous Plastics Kit, spare part number 378236-001.
Removing the Memory Module/Mini PCI Compartment Cover
6–12
Maintenance and Service Guide
Removal and Replacement Procedures
6. Spread the retaining tabs 1 on each side of the memory
module socket to release the memory module. (The edge of
the module opposite the socket rises away from
the computer.)
7. Slide the module 2 away from the socket at an angle.
8. Remove the memory module.
modules are designed with notches 3 to prevent
✎ Memory
incorrect installation into the memory module socket.
Removing the Memory Module
Reverse the above procedure to install a memory module.
Maintenance and Service Guide
6–13
Removal and Replacement Procedures
6.8 Mini PCI Communications Module
Mini PCI Communications Module
Spare Part Number Information
802.11b/g WLAN module, for use in most of the world
802.11b/g WLAN module, for use in the rest of the world
381582-001
381583-001
802.11b/g combination WLAN module, for use internationally
802.11b/g combination WLAN module, for use Japan
802.11b/g combination WLAN module, for use in
the United States
373032-002
373032-291
373032-001
802.11a/b/g combination WLAN module, for use in Europe,
Middle East, and Africa
802.11a/b/g combination WLAN Mini PCI communications
module for use Japan
802.11a/b/g combination WLAN module, for use internationally
802.11a/b/g combination WLAN module, for use Japan
802.11a/b/g combination WLAN module, for use in most of the
world
802.11a/b/g combination WLAN module, for use in
the United States
802.11a/b/g High Band combination WLAN module
373900-021
373900-291
373033-002
373033-291
373900-001
373033-001
373901-001
1. Prepare the computer for disassembly (Section 6.3).
2. Remove the memory module/Mini PCI compartment cover
(Section 6.7).
3. Position the computer with the front toward you.
6–14
Maintenance and Service Guide
Removal and Replacement Procedures
4. Disconnect the auxiliary and main antenna cables 1 from the
Mini PCI communications module.
note of which antenna cable is attached to which antenna
✎ Make
clip on the Mini PCI communications module before
disconnecting the cables.
5. Spread the two retaining tabs 2 on each side of the Mini PCI
socket to release the Mini PCI communications module. (The
edge of the module opposite the socket rises away from the
computer.)
6. Remove the Mini PCI communications module 3 by pulling
the card away from the socket at a 45-degree angle.
PCI communications modules are designed with notches 4
✎ Mini
to prevent incorrect installation.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI
communications module.
Maintenance and Service Guide
6–15
Removal and Replacement Procedures
6.9 Optical Drive
Optical Drive Spare Part Number Information
24X Max CD-ROM drive
8X Max DVD-ROM drive
8X Max DVD±RW and CD-RW Combo Drive
4X Max DVD±RW and CD-RW Combo Drive
2X Max DVD±RW and CD-RW Combo Drive
DVD/CD-RW Combo Drive
DVD±RW and CD-RW Double Layer Combo Drive
DVD±RW and CD-RW Combo Drive
380768-001
380770-001
380773-001
380771-001
375557-001
380772-001
398608-001
403093-001
1. Prepare the computer for disassembly (Section 6.3).
2. Remove the memory module/Mini PCI compartment cover
(Section 6.7).
3. Position the computer with right side toward you.
6–16
Maintenance and Service Guide
Removal and Replacement Procedures
4. Remove the Torx8 T8M2.0×9.0 screw 1 that secures the
optical drive to the computer.
5. Insert a thin tool, such as an unbent paper clip 2, into the
media tray release hole and release the media tray.
6. Use the media tray to slide the optical drive 3 to the left and
out of the computer.
7. Remove the optical drive.
Removing the Optical Drive
Reverse the above procedure to install an optical drive.
Maintenance and Service Guide
6–17
Removal and Replacement Procedures
6.10 Keyboard
Keyboard Spare Part Number Information
For use with computer models with Dual Stick (Pointing Stick and TouchPad)
pointing devices:
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
Latin America
6–18
398609-201
398609-221
398609-081
398609-051
398609-121
398609-041
398609-151
398609-211
398609-DD1
398609-002
398609-BB1
398609-061
398609-291
398609-AD1
398609-161
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
398609-091
398609-131
398609-251
398609-171
398609-231
398609-BA1
398609-071
398609-101
398609-111
398609-AB1
398609-281
398609-141
398609-031
398609-001
Maintenance and Service Guide
Removal and Replacement Procedures
Keyboard Spare Part Number Information (Continued)
For use with computer models with TouchPad only pointing devices:
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
378248-181
378248-201
378248-221
378248-081
378248-051
378248-121
378248-041
378248-151
378248-211
378248-DD1
378248-002
378248-BB1
378248-061
378248-291
378248-AD1
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
378248-161
378248-091
378248-131
378248-251
378248-171
378248-231
378248-BA1
378248-071
378248-101
378248-111
378248-AB1
378248-281
378248-141
378248-031
378248-001
1. Prepare the computer for disassembly (Section 6.3).
2. Remove the memory module/Mini PCI compartment cover
(Section 6.7).
Maintenance and Service Guide
6–19
Removal and Replacement Procedures
3. Remove the 2 Torx8 T8M2.0×9.0 screws that secure the
keyboard to the computer.
Removing the Keyboard Screws
6–20
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the computer display-side up with the front toward you.
5. Open the computer as far as possible.
6. Slide the 4 keyboard retaining latches toward you.
Releasing the Keyboard Latches
Maintenance and Service Guide
6–21
Removal and Replacement Procedures
7. Lift the rear edge of the keyboard up and swing it toward you
until it rests on the palm rest.
Releasing the Keyboard
6–22
Maintenance and Service Guide
Removal and Replacement Procedures
8. Release the zero insertion force (ZIF) connector 1 to which
the keyboard cable is attached and disconnect the keyboard
cable 2.
9 applies only to computer models equipped with a pointing
✎ Step
stick.
9. Release the ZIF connector 3 to which the pointing stick
cable is attached and disconnect the pointing stick cable 4.
Disconnecting the Keyboard and Pointing Stick Cables
10. Remove the keyboard.
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
6–23
Removal and Replacement Procedures
6.11 Switch Cover
Switch Cover Spare Part Number Information
Switch covers
For use with full-featured models
For use with defeatured models
378232-001
378242-001
1. Prepare the computer for disassembly (Section 6.3).
2. Remove the keyboard (Section 6.10).
3. Turn the computer upside down with the rear panel
toward you.
4. Remove the 2 Torx8 T8M2.0×2.0 screws that secure the
switch cover to the computer.
Removing the Switch Cover Screws
6–24
Maintenance and Service Guide
Removal and Replacement Procedures
5.
6.
7.
8.
Turn the computer display-side up with front toward you.
Open the computer as far as possible.
Disconnect the LED board cable 1 from the system board.
Insert a flat-bladed screwdriver into the four notches 2 on the
front edge of the switch cover 3 and lift up until the cover
disengages from the computer.
9. Remove the switch cover.
Removing the Switch Cover
Reverse the above procedure to install the switch cover.
Maintenance and Service Guide
6–25
Removal and Replacement Procedures
6.12 LED Board
✎ This section applies only to full-featured models.
LED Board Spare Part Number Information
LED board (includes LED board cable)
378228-001
1.
2.
3.
4.
Prepare the computer for disassembly (Section 6.3).
Remove the keyboard (Section 6.10).
Remove the switch cover (Section 6.11).
Turn the computer upside down with the rear panel
toward you.
5. Turn the switch cover upside down.
6–26
Maintenance and Service Guide
Removal and Replacement Procedures
6. Remove the 4 Phillips PM1.5×4.0 screws 1 that secure the
LED board to the switch cover.
7. Remove the LED board 2.
Removing the LED Board
Reverse the above procedure to install the LED board.
Maintenance and Service Guide
6–27
Removal and Replacement Procedures
6.13 Fan
Fan Spare Part Number Information
Fan
378233-001
1. Prepare the computer for disassembly (Section 6.3).
2. Release the keyboard (Section 6.10).
3. Disconnect the fan cable 1 from the system board.
4. Loosen the 2 Phillips PM2.0×7.0 screws 2 that secure the fan
to the computer.
5. Remove the fan 3.
Removing the Fan
Reverse the above procedure to install the fan.
6–28
Maintenance and Service Guide
Removal and Replacement Procedures
6.14 Heat Sink
Heat Sink Spare Part Number Information
Heat sink (includes thermal paste)
379799-001
1. Prepare the computer for disassembly (Section 6.3).
2. Release the keyboard (Section 6.10).
3. Remove the fan (Section 6.13).
4. Loosen the 4 Phillips PM2.0×8.0 shoulder screws 1 that
secure the heat sink to the computer.
5. Lift the right side of the heat sink 2 to disengage it from the
processor.
6. Slide the heat sink 3 up and to the right to remove it.
to the adhesive quality of the thermal paste located between
✎ Due
the heat sink and processor, it may be necessary to move the heat
sink from side to side to detach the heat sink from the processor.
Removing the Heat Sink
Reverse the above procedure to install the heat sink.
Maintenance and Service Guide
6–29
Removal and Replacement Procedures
6.15 Processor
Processor Spare Part Number Information
Intel Pentium M 2.13-GHz
Intel Pentium M 2.00-GHz
Intel Pentium M 1.86-GHz
Intel Pentium M 1.73-GHz
Intel Pentium M 1.60-GHz
Intel Pentium M 1.30-GHz
378224-001
378223-001
378222-001
378221-001
378220-001
378219-001
Intel Celeron M 1.5-GHz
Intel Celeron M 1.4-GHz
Intel Celeron M 1.3-GHz
378218-001
378217-001
378216-001
1. Prepare the computer for disassembly (Section 6.3).
2. Release the keyboard (Section 6.10).
3. Remove the fan (Section 6.13).
4. Remove the heat sink (Section 6.14).
6–30
Maintenance and Service Guide
Removal and Replacement Procedures
5. Use a flat-bladed screwdriver to turn the processor locking
screw 1 one-quarter turn counterclockwise until you hear a
click.
6. Lift the processor 2 straight up and remove it.
gold triangle 3 on the processor should be aligned in the
✎ The
front right corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.
Maintenance and Service Guide
6–31
Removal and Replacement Procedures
6.16 Modem Board
Modem Board Spare Part Number Information
Modem board
325521-001
1. Prepare the computer for disassembly (Section 6.3).
2. Release the keyboard (Section 6.10).
6–32
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the 2 Phillips PM2.0×3.0 screws 1 that secure the
modem board to the computer.
4. Lift the right side of the modem board 2 to disconnect it
from the system board.
5. Disconnect the modem cable 3 from the modem board.
6. Remove the modem board.
Removing the Modem Board
Reverse the above procedure to install the modem board.
Maintenance and Service Guide
6–33
Removal and Replacement Procedures
6.17 Internal Memory Module
Memory Module Spare Part Number Information
1024 MB
512 MB
256 MB
336579-001
336578-001
366577-001
1. Prepare the computer for disassembly (Section 6.3).
2. Release the keyboard (Section 6.10).
3. Spread the retaining tabs 1 on each side of the memory
module socket to release the memory module. (The edge of
the module opposite the socket rises away from the computer.)
4. Slide the module 2 away from the socket at an angle .
5. Remove the memory module.
modules are designed with notches 3 to prevent
✎ Memory
incorrect installation into the memory module socket.
Removing the Memory Module
Reverse the above procedure to install a memory module.
6–34
Maintenance and Service Guide
Removal and Replacement Procedures
6.18 RTC Battery
RTC battery is included in the Miscellaneous Plastics Kit,
✎ The
spare part number 378236-001.
1. Prepare the computer for disassembly (Section 6.3).
2. Release the keyboard (Section 6.10).
3. Disconnect the RTC battery cable 1 from the system board.
4. Remove the RTC battery 2 from the clip in the top cover.
Removing the RTC Battery
Reverse the above procedure to install an RTC battery.
Maintenance and Service Guide
6–35
Removal and Replacement Procedures
6.19 Display Assembly
Display Assembly Spare Part Number Information
15.0-inch, SXGA+WVA, TFT
15.0-inch, XGA, TFT
14.1-inch, XGA, TFT
378210-001
378209-001
378208-001
1. Prepare the computer for disassembly (Section 6.3).
2. Remove the Memory module/Mini PCI compartment cover
(Section 6.7) and disconnect the wireless antenna cables from
the Mini PCI communications module (Section 6.8).
3. Remove the keyboard (Section 6.10).
4. Remove the switch cover (Section 6.11)
6–36
Maintenance and Service Guide
Removal and Replacement Procedures
5. Disconnect the display cable 1 from the system board.
6. Remove the wireless antenna cables 2 from the Mini PCI
compartment and the top cover clips.
7. Remove the 2 Torx8 T8M2.0×9.0 screws 3 that secure the
display assembly to the computer.
Disconnecting the Display Cable and Removing the Display Screws
Maintenance and Service Guide
6–37
Removal and Replacement Procedures
8. Swing the display assembly into a partially closed position.
9. Position the computer with the rear panel toward you.
Ä
CAUTION: Support the display assembly when removing the following
screws. Failure to support the display assembly can result in damage to
the display assembly and other computer components.
10. Remove the 4 Torx8 T8M2.0×9.0 screws 1 that secure the
display assembly to the computer.
11. Lift the display assembly 2 straight up and remove it.
Removing the Display Assembly
Reverse the above procedure to install the display assembly.
6–38
Maintenance and Service Guide
Removal and Replacement Procedures
6.20 Top Cover
Top Cover Spare Part Number Information
Top cover (include TouchPad)
For use with computer models with Dual Stick (Pointing Stick
and TouchPad) pointing devices:
For use with full-featured models
For use with defeatured models
399109-001
Pointing stick board (for use only with computer models with
Dual Stick pointing devices)
399110-001
378230-001
378239-001
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Memory module/Mini PCI compartment cover
(Section 6.7)
c. Optical drive (Section 6.9)
d. Keyboard (Section 6.10)
e. Switch cover (Section 6.11)
f. Display assembly (Section 6.19)
Maintenance and Service Guide
6–39
Removal and Replacement Procedures
2. Turn the computer upside down with the rear panel
toward you.
3. Remove the 13 Torx8 T8M2.0×9.0 screws that secure the top
cover to the computer.
Removing the Top Cover Screws, Part 1
6–40
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the computer right-side up with the front toward you.
5. Disconnect the RTC battery cable from the system board.
Disconnecting the RTC Battery Cable
6. Remove the 2 Torx8 T8M2.0×9.0 screws 1 that secure the
top cover to the computer.
7. Disconnect the TouchPad cable 2 from the system board.
Removing the Top Cover Screws, Part 2
Maintenance and Service Guide
6–41
Removal and Replacement Procedures
8. Lift up the rear edge of the top cover 1 until it disengages
from the base enclosure.
9. Swing the top cover 2 toward you until the left and right
sides of the top cover disengage from the base enclosure.
10. Lift up on the left 3 and right sides 4 of the top cover until
the top cover disengages from the base enclosure.
Releasing the Top Cover
11. Lift the top cover straight up until the front edge of the top
cover disengages from the base enclosure and remove the
top cover.
Reverse the above procedure to install the top cover.
6–42
Maintenance and Service Guide
Removal and Replacement Procedures
6.21 Speaker
Speaker Spare Part Number Information
Speaker
378237-001
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Memory module/Mini PCI compartment cover
(Section 6.7)
c. Optical drive (Section 6.9)
d. Keyboard (Section 6.10)
e. Switch cover (Section 6.11)
f. Display assembly (Section 6.19)
g. Top cover (Section 6.20)
Maintenance and Service Guide
6–43
Removal and Replacement Procedures
2. Disconnect the speaker cable from the system board.
Disconnecting the Speaker Cable
6–44
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the 4 Torx8 T8M2.0×4.0 screws 1 that secure the
speaker to the computer.
4. Lift the speaker 2 until it clears the system board.
5. Slide the speaker 3 toward you and remove it.
Removing the Speaker
Reverse the above procedure to install the speaker.
Maintenance and Service Guide
6–45
Removal and Replacement Procedures
6.22 Digital Media Board
✎ This section applies only to full-featured models.
Digital Media Board Spare Part Number Information
Digital media board (includes digital media board cable)
378229-001
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Memory module/Mini PCI compartment cover
(Section 6.7)
c. Optical drive (Section 6.9)
d. Keyboard (Section 6.10)
e. Switch cover (Section 6.11)
f. Display assembly (Section 6.19)
g. Top cover (Section 6.20)
h. Speaker (Section 6.21)
6–46
Maintenance and Service Guide
Removal and Replacement Procedures
2. Release the ZIF connector to which the digital media board
cable is attached and disconnect the digital media board
cable 1 from the system board.
3. Remove the digital media board 2.
Removing the Digital Media Board
Reverse the above procedure to install the digital media board.
Maintenance and Service Guide
6–47
Removal and Replacement Procedures
6.23 USB/Audio Board
models are equipped with a USB/audio board.
✎ Full-featured
Defeatured models are equipped with an audio board. The
removal procedures are identical for both boards.
USB/Audio Board Spare Part Number Information
USB/audio board (for use only with full-featured models;
includes audio board cable and USB board cable)
Audio board (for use only with defeatured models; includes
audio board cable)
378226-001
378241-001
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Memory module/Mini PCI compartment cover
(Section 6.7)
c. Optical drive (Section 6.9)
d. Keyboard (Section 6.10)
e. Switch cover (Section 6.11)
f. Display assembly (Section 6.19)
g. Top cover (Section 6.20)
6–48
Maintenance and Service Guide
Removal and Replacement Procedures
2. Position the computer with the rear panel toward you.
3. Disconnect the USB cable 1 and audio cable 2 from the
system board.
USB cable is present only on full-featured models.
✎ The4. Remove
the Phillips PM1.5×3.0 screw 3 that secures the
USB/audio board and shield to the base enclosure.
5. Remove the cables from the clips 4 in the base enclosure.
6. Remove the USB/audio board 5.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.
Maintenance and Service Guide
6–49
Removal and Replacement Procedures
6.24 System Board
System Board Spare Part Number Information
For use with full-featured models
For use with defeatured models-GML
For use with defeatured models-GML
378225-001
378238-001
383219-001
replacing the system board, ensure that the following
✎ When
components are removed from the defective system board and
installed on the replacement system board:
■ Memory modules (Section 6.7 and Section 6.17)
■ Mini PCI communications card (Section 6.8)
■ Processor (Section 6.15)
■ Modem board (Section 6.16)
6–50
Maintenance and Service Guide
Removal and Replacement Procedures
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Bluetooth board (Section 6.6)
c.
d.
e.
f.
g.
h.
Optical drive (Section 6.9)
Keyboard (Section 6.10)
Switch cover (Section 6.11)
Fan (Section 6.13)
Heat sink (Section 6.14)
RTC battery (Section 6.18)
i. Display assembly (Section 6.19)
j. Top cover (Section 6.20)
k. Speaker (Section 6.21)
l. Digital media board (Section 6.22)
m. USB/audio board (Section 6.23)
Maintenance and Service Guide
6–51
Removal and Replacement Procedures
2. Disconnect the serial connector cable 1 and the Bluetooth
cable 2 from the system board.
3. Remove the Torx8 T8M2.0×4.0 screw 3 that secures the
system board to the base enclosure next to the RJ-11
connector.
4 applies only to full-featured models.
✎ Step
4. Remove the 2 HM5.0×9.0 screw locks 4 on each side of the
parallel connector.
5. Remove the 2 HM5.0×9.0 screw locks 5 on each side of
the external monitor connectors.
Removing the System Board Screws and Screw Locks
6–52
Maintenance and Service Guide
Removal and Replacement Procedures
6. If necessary, disconnect the RJ-11 connector module cable
from the system board and remove the RJ-11 connector
module and cable.
Removing the RJ-11 Connector Module and Cable
Maintenance and Service Guide
6–53
Removal and Replacement Procedures
7. Use the optical drive connector to lift the system board 1
until the power connector 2 is clear of the base enclosure.
8. Slide the system board 3 to the left at an angle and remove it.
Removing the System Board
Reverse the above procedures to install the system board.
6–54
Maintenance and Service Guide
Removal and Replacement Procedures
6.25 Serial Connector Module
✎ This section applies only to full-featured models.
Serial Connector Module Spare Part Number Information
Serial connector module (includes serial connector
module cable)
378227-001
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Bluetooth board (Section 6.6)
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
Optical drive (Section 6.9)
Keyboard (Section 6.10)
Switch cover (Section 6.11)
Fan (Section 6.13)
Heat sink (Section 6.14)
RTC battery (Section 6.18)
Display assembly (Section 6.19)
Top cover (Section 6.20)
Speaker (Section 6.21)
Digital media board (Section 6.22)
m. USB/audio board (Section 6.23)
Maintenance and Service Guide
6–55
Removal and Replacement Procedures
2. Remove the 2 HM5.0×9.0 screw locks 1 on each side of the
serial connector.
3. Lift the serial connector module and cable 2 out of the base
enclosure.
4. Disconnect the serial connector module cable 3 from the
system board.
Removing the Serial Connector Module
6–56
Maintenance and Service Guide
7
Specifications
This chapter provides physical and performance specifications.
Table 7-1
Computer
Dimensions
Height
Width
Depth
Weight
Full-featured model with
15.0-inch display, optical drive,
and 6-cell battery pack
Defeatured model with 14.1-inch
display, optical drive, and 6-cell
battery pack
Metric
U.S.
32.8 cm
26.7 cm
3.1 cm
12.91
10.51
1.22
2.86 kg
6.31 lbs
2.72 kg
5.99 lbs
Input Power
Operating voltage
Operating current
18.5 V dc @ 3.5 A - 65 W
3.5 A
Temperature
Operating (not writing to
optical disc)
Operating (writing to optical disc)
Nonoperating
Maintenance and Service Guide
0°C to 35°C
32°F to 95°F
5°C to 35°C
-20°C to 60°C
41°F to 95°F
-4°F to 140°F
7–1
Specifications
Table 7-1
Computer (Continued)
Relative humidity (noncondensing)
Operating
Nonoperating
10% to 90%
5% to 95%
10% to 90%
5% to 95%
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating
Nonoperating
0.75 g zero-to-peak, 10 Hz to 500 Hz,
0.25 oct/min sweep rate
1.50 g zero-to-peak, 10 Hz to 500 Hz,
0.5 oct/min sweep rate
product safety standards specify thermal limits for plastic
✎ Applicable
surfaces. The computer operates well within this range of temperatures.
7–2
Maintenance and Service Guide
Specifications
Table 7-2
15.0-inch, SXGA+WVA, TFT Display
Dimensions
Height
Width
Diagonal
30.0 cm
22.9 cm
38.1 cm
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Brightness
150 nits typical
11.8 in
9.0 in
15.0 in
Pixel resolution
Pitch
Format
Configuration
0.264 × 0.264 mm
1400 × 1050
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
5.5 W
Viewing angle
+/-35° horizontal, +15/-35° vertical
typical
Maintenance and Service Guide
7–3
Specifications
Table 7-3
15.0-inch, XGA, TFT Display
Dimensions
Height
Width
Diagonal
30.0 cm
22.9 cm
38.1 cm
11.8 in
9.0 in
15.0 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Brightness
150 nits typical
Pixel resolution
Pitch
Format
Configuration
0.264 × 0.264 mm
1024 × 768
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
5.5 W
Viewing angle
+/-35° horizontal, +15/-35° vertical
typical
7–4
Maintenance and Service Guide
Specifications
Table 7-4
14.1-inch, XGA, TFT Display
Dimensions
Height
Width
Diagonal
28.5 cm
21.3 cm
35.8 cm
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Brightness
180 nits typical
11.2 in
8.4 in
14.1 in
Pixel resolution
Pitch
Format
Configuration
0.279 × 0.279 mm
1024 × 768
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4.0 W
Viewing angle
+/-40° horizontal, +20/-40° vertical
typical
Maintenance and Service Guide
7–5
Specifications
Table 7-5
Hard Drives
80-GB*
60-GB*
60-GB*
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
102 g
ATA-5
ATA-5
ATA-5
100 MB/sec
ATA security
100 MB/sec
ATA security
100 MB/sec
ATA security
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
3 ms
13 ms
24 ms
Logical blocks†
156,301,488 156,301,488 117,210,240
Disc rotational speed
4200 rpm
Operating temperature
✎
4200 rpm
5400 rpm
5°C to 55°C (41°F to 131°F)
Certain restrictions and exclusions apply. Consult Customer Care
for details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual
accessible capacity is less.
†
Actual drive specifications may differ slightly.
7–6
Maintenance and Service Guide
Specifications
Table 7-5
Hard Drives (Continued)
60-GB*
40-GB*
30-GB*
9.5 mm
70 mm
102 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
ATA-5
100 MB/sec
ATA
security
100 MB/sec
ATA
security
100 MB/sec
ATA security
3 ms
13 ms
24 ms
2.5 ms
12 ms
23 ms
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
3 ms
13 ms
24 ms
Logical blocks†
117,210,240 78,140,160
58,605,120
Disc rotational speed
4200 rpm
4200 rpm
Operating temperature
✎
4200 rpm
5°C to 55°C (41°F to 131°F)
Certain restrictions and exclusions apply. Consult Customer Care
for details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual
accessible capacity is less.
†Actual drive specifications may differ slightly.
Maintenance and Service Guide
7–7
Specifications
Table 7-6
Primary 6-cell, Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
2.00 cm
9.40 cm
13.40 cm
0.34 kg
0.79 in
3.70 in
5.28 in
0.75 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
11.1 V
4.4 Ah
48 Wh
Temperature
Operating
Nonoperating
7–8
5°C to 45°C
0°C to 60°C
41°F to 113°F
32°F to 140°F
Maintenance and Service Guide
Specifications
Table 7-7
DVD-ROM Drive
Applicable disc
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18)
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R
CD-RW
Photo CD (single and multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
12 cm (4.72 in)
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
< 100 ms
< 175 ms
< 125 ms
< 225 ms
Random
Full stroke
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 10 seconds
Stop time
< 3 seconds
Maintenance and Service Guide
7–9
Specifications
Table 7-8
DVD/CD-RW Combo Drive
Applicable disc
Read:
Write:
DVD-R, DVD-RW,
CD-R and CD-RW
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2,
Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single and
multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
7–10
12 cm (4.72 in)
8 cm (3.15 in)
Maintenance and Service Guide
Specifications
Table 7-8
DVD/CD-RW Combo Drive (Continued)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD media
DVD media
< 110 ms
< 210 ms
< 130 ms
< 225 ms
Random
Full stroke
Audio output level
Line-out, 0.7 V rms
Cache buffer
2 MB
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
7–11
Specifications
Table 7-9
DVD±RW and CD-RW Combo Drive
Applicable disc
Read:
DVD-R, DVD-RW,
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1
and 2)
CD Digital Audio
CD-XA ready (Mode
2, Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single
and multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Write:
CD-R and CD-RW
DVD-R and
DVD-RW
Disc diameter
Standard disc
Mini disc
7–12
12 cm (4.72 in)
8 cm (3.15 in)
Maintenance and Service Guide
Specifications
Table 7-9
DVD±RW and CD-RW Combo Drive (Continued)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
< 175 ms
< 285 ms
< 230 ms
< 335 ms
Random
Full stroke
Audio output level
Audio-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
CD-R (16X)
CD-RW (8X)
CD-ROM (24X)
DVD (8X)
DVD-R (4X)
DVD-RW (2X)
Multiword DMA mode 2
2,400 KB/s (150 KB/s at 1X CD rate)
1,200 KB/s (150 KB/s at 1X CD rate)
3,600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
5,400 KB/s (1,352 KB/s at 1X DVD rate)
2,700 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
7–13
Specifications
Table 7-10
CD-ROM Drive
Applicable disc
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R
CD-RW
Photo CD (single and multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
Disc thickness
7–14
12 cm (4.72 in)
8 cm (3.15 in)
1.2 mm (0.047 in)
Maintenance and Service Guide
Specifications
Table 7-10
CD-ROM Drive (Continued)
Track pitch
1.6 µm
Access time
CD media
DVD media
< 110 ms
< 220 ms
< 125 ms
< 225 ms
Random
Full stroke
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
CD-R (24X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
16.6 MB/s
Startup time
< 8 seconds
Stop time
< 4 seconds
Maintenance and Service Guide
7–15
Specifications
Table 7-11
System DMA
Hardware DMA
System Function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
7–16
Maintenance and Service Guide
Specifications
Table 7-12
System Interrupts
Hardware IRQ
System Function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft Natural Keyboard
IRQ2
Cascaded
IRQ3
Intel 82801DB/DBM USB2 Enhanced Host
Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio
Intel 82801DB/DBM SMBus Controller—24C3
Data Fax Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI fast Ethernet Controller
Maintenance and Service Guide
7–17
Specifications
Table 7-12
System Interrupts (Continued)
IRQ11
Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9,
IRQ10, or none.
Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or
✎ PC
IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4.
7–18
Maintenance and Service Guide
Specifications
Table 7-13
System I/O Addresses
I/O Address (hex)
System Function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/RTC
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
Maintenance and Service Guide
7–19
Specifications
Table 7-13
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
Joystick (decoded in ESS1688)
202 - 21F
Unused
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
7–20
Maintenance and Service Guide
Specifications
Table 7-13
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
Maintenance and Service Guide
7–21
Specifications
Table 7-14
System Memory Map
Size
Memory Address
System Function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
01000000-047FFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
7–22
Maintenance and Service Guide
A
Connector Pin Assignments
Table A-1
Audio-Out (Headphone)
Pin
Signal
Pin
Signal
1
Audio out, left channel
3
Ground
2
Audio out, right channel
Maintenance and Service Guide
A–1
Connector Pin Assignments
Table A-2
Audio-In (Microphone)
Pin
Signal
Pin
Signal
1
Audio signal in
3
Ground
2
Audio signal in
Table A-3
Universal Serial Bus
Pin
Signal
Pin
Signal
1
+5 VDC
3
Data +
2
Data –
4
Ground
A–2
Maintenance and Service Guide
Connector Pin Assignments
Table A-4
Serial
Pin
Signal
Pin
Signal
1
Carrier detect
6
Data set ready
2
Receive data
7
Ready to send
3
Transmit data
8
Clear to send
4
Data terminal ready
9
Ring indicator
5
Ground
Maintenance and Service Guide
A–3
Connector Pin Assignments
Table A-5
Parallel Port
Pin
Signal
Pin
Signal
1
Strobe
14
Auto linefeed
2
Data bit 0
15
Error
3
Data bit 1
16
Initialize printer
4
Data bit 2
17
Select in
5
Data bit 3
18
Ground
6
Data bit 4
19
Ground
7
Data bit 5
20
Ground
8
Data bit 6
21
Ground
9
Data bit 7
22
Ground
10
Acknowledge
23
Ground
11
Busy
24
Ground
12
Paper end
25
Ground
13
Select
A–4
Ground
Maintenance and Service Guide
Connector Pin Assignments
Table A-6
S-Video-Out
1
2
3
4 56
7
Pin
Signal
Pin
Signal
1
S-VHS color (C) signal
5
TV-CD
2
Composite video signal
6
S-VHS intensity ground
3
S-VHS intensity (Y) signal
7
Composite video ground
4
S-VHS color ground
Maintenance and Service Guide
A–5
Connector Pin Assignments
Table A-7
External Monitor
Pin
Signal
Pin
Signal
1
Red analog
9
+5 VDC
2
Green analog
10
Ground
3
Blue analog
11
Monitor detect
4
Not connected
12
DDC 2B data
5
Ground
13
Horizontal sync
6
Ground analog
14
Vertical sync
7
Ground analog
15
DDC 2B clock
8
Ground analog
A–6
Maintenance and Service Guide
Connector Pin Assignments
Table A-8
RJ-11 (Modem)
Pin
Signal
Pin
Signal
1
Unused
4
Unused
2
Tip
5
Unused
3
Ring
6
Unused
Maintenance and Service Guide
A–7
Connector Pin Assignments
Table A-9
RJ-45 (Network)
Pin
Signal
Pin
Signal
1
Transmit +
5
Unused
2
Transmit –
6
Receive –
3
Receive +
7
Unused
4
Unused
8
Unused
A–8
Maintenance and Service Guide
B
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the computer permits it to operate
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set included with the computer meets the
requirements for use in the country where the equipment is
purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the computer is used.
Maintenance and Service Guide
B–1
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries.
B–2
■
The length of the power cord set must be at least 1.5 m
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the
country where the power cord set will be used.
■
The power cord sets must have a minimum current capacity
of 10 amps and a nominal voltage rating of 125 or 250 V AC,
as required by each country’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the computer.
Maintenance and Service Guide
Power Cord Set Requirements
Country-Specific Requirements
3-Conductor Power Cord Set Requirements
Country/Region
Accredited Agency
Applicable Note Number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
✎ NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
B–3
Power Cord Set Requirements
3-Conductor Power Cord Set Requirements (Continued)
Country/Region
Accredited Agency
Applicable Note Number
Korea
EK
4
The Netherlands
KE A
1
Norway
NEMKO
1
People’s Republic
of China
CCC
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
United Kingdom
BSI
1
United States
UL
2
✎ NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75 mm² conductor
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country
where it will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75 mm² conductor
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country
where it will be used.
B–4
Maintenance and Service Guide
C
Screw Listing
This appendix provides specification and reference information
for the screws and screw locks used in the computer. All screws
and screw locks listed in this appendix are available in the
Screw Kit, spare part number 378235-001.
Maintenance and Service Guide
C–1
Screw Listing
Table C-1
Phillips PM2.0×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
3
4.0 mm
2.0 mm
4.0 mm
Where used:
1 Two screws that secure the hard drive cover to the computer (screws are
captured on the cover by C clips; documented in Section 6.4)
2 One screw that secures the memory module/Mini PCI compartment cover
to the computer (screw is captured on the cover by a C clip; documented in
Section 6.7)
Phillips PM2.0×4.0 Screw Locations
C–2
Maintenance and Service Guide
Screw Listing
Table C-2
Phillips PM2.5×13.0 Spring-loaded Hard Drive Retention Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
1
13.0 mm
2.5 mm
5.5 mm
Where used:
One screw that secures the hard drive to the computer (screw is captured on the
hard drive frame by a C clip; documented in Section 6.4)
Phillips PM2.5×13.0 Screw Location
Maintenance and Service Guide
C–3
Screw Listing
Table C-3
Phillips PM2.5×4.0 Shoulder Screw, Phillips PM2.5×4.0 Screw,
and Phillips PM1.5×3.5 Screw
mm
mm
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
4.0 mm
2.5 mm
4.0 mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
4.0 mm
2.5 mm
4.5 mm
Color
Qty.
Length
Thread
Head
Width
Black
2
3.5 mm
1.5 mm
4.5 mm
Where used:
1 Two screws that secure the hard drive frame to the hard drive (documented
in Section 6.4)
2 Two screws that secure the hard drive frame to the hard drive (documented
in Section 6.4)
3 Two screws that secure the hard drive frame to the hard drive (documented
in Section 6.4)
Phillips PM2.5×4.0 Shoulder Screw, Phillips PM2.5×4.0 Screw,
and Phillips PM1.5×3.5 Screw Locations
C–4
Maintenance and Service Guide
Screw Listing
Table C-4
Torx8 T8M2.0×9.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
24
9.0 mm
2.0 mm
4.0 mm
Where used:
One screw that secures the optical drive to the computer (documented in
Section 6.9)
Torx8 T8M2.0×9.0 Screw Location
Maintenance and Service Guide
C–5
Screw Listing
Table C-4
Torx8 T8M2.0×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
24
9.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the keyboard to the computer (documented in
Section 6.10)
Torx8 T8M2.0×9.0 Screw Locations
C–6
Maintenance and Service Guide
Screw Listing
Table C-4
Torx8 T8M2.0×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
24
9.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the display assembly to the computer (documented in
Section 6.19)
Torx8 T8M2.0×9.0 Screw Locations
Maintenance and Service Guide
C–7
Screw Listing
Table C-4
Torx8 T8M2.0×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
24
9.0 mm
2.0 mm
4.0 mm
Where used:
4 screws that secure the display assembly to the computer (documented in
Section 6.19)
Torx8 T8M2.0×9.0 Screw Locations
C–8
Maintenance and Service Guide
Screw Listing
Table C-4
Torx8 T8M2.0×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
24
9.0 mm
2.0 mm
4.0 mm
Where used:
13 screws that secure the top cover to the computer (documented in
Section 6.20)
Torx8 T8M2.0×9.0 Screw Locations
Maintenance and Service Guide
C–9
Screw Listing
Table C-4
Torx8 T8M2.0×9.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
24
9.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the top cover to the computer (documented in
Section 6.20)
Torx8 T8M2.0×9.0 Screw Locations
C–10
Maintenance and Service Guide
Screw Listing
Table C-5
Torx8 T8M2.0×2.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
2.0 mm
2.0 mm
6.0 mm
Where used:
2 screws that secure the switch cover to the computer (documented in
Section 6.11)
Torx8 T8M2.0×2.0 Screw Locations
Maintenance and Service Guide
C–11
Screw Listing
Table C-6
Phillips PM1.5×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
4.0 mm
1.5 mm
4.0 mm
Where used:
4 screws that secure the LED board to the switch cover (documented in
Section 6.12)
Phillips PM1.5×4.0 Screw Locations
C–12
Maintenance and Service Guide
Screw Listing
Table C-7
Phillips PM2.0×7.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
7.0 mm
2.0 mm
4.5 mm
Where used:
2 screws that secure the fan to the computer (screws are captured on the fan
assembly by an O clip; documented in Section 6.13)
Phillips PM2.0×7.0 Screw Locations
Maintenance and Service Guide
C–13
Screw Listing
Table C-8
Phillips PM2.0×8.0 Shoulder Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
8.0 mm
2.0 mm
5.0 mm
Where used:
4 screws that secure the heat sink to the computer (screws are captured on the
heat sink by C clips; documented in Section 6.14)
Phillips PM2.0×8.0 Shoulder Screw Locations
C–14
Maintenance and Service Guide
Screw Listing
Table C-9
Phillips PM2.0×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
3.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the modem board to the computer (documented in
Section 6.16)
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide
C–15
Screw Listing
Table C-10
Torx8 T8M2.0×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
6
4.0 mm
2.0 mm
4.0 mm
Where used:
4 screws that secure the speaker to the computer (documented in Section 6.21)
Torx8 T8M2.0×4.0 Screw Locations
C–16
Maintenance and Service Guide
Screw Listing
Table C-10
Torx8 T8M2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
6
4.0 mm
2.0 mm
4.0 mm
Where used:
One screw that secures the USB/audio board the computer (documented in
Section 6.23)
Torx8 T8M2.0×4.0 Screw Location
Maintenance and Service Guide
C–17
Screw Listing
Table C-10
Torx8 T8M2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
6
4.0 mm
2.0 mm
4.0 mm
Where used:
One screw that secures the system board the computer (documented in
Section 6.24)
Torx8 T8M2.0×4.0 Screw Location
C–18
Maintenance and Service Guide
Screw Listing
Table C-11
Hex Socket HM5.0×9.0 Screw Lock
mm
Color
Qty.
Length
Thread
Head
Width
Silver
6
9.0 mm
2.5 mm
5.0 mm
Where used:
1 Two screw locks that secure the system board to the computer only
on HP Compaq nc6110 and nc6120 computer models
(documented in Section 6.24)
2 Two screw locks that secure the system board to the computer
(documented in Section 6.24)
Hex Socket HM5.0×9.0 Screw Lock Locations
Maintenance and Service Guide
C–19
Screw Listing
Table C-11
Hex Socket HM5.0×9.0 Screw Lock (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
6
9.0 mm
2.5 mm
5.0 mm
Where used:
2 screw locks that secure the serial connector board to the system board
(documented in Section 6.25)
Hex Socket HM5.0×9.0 Screw Lock Locations
C–20
Maintenance and Service Guide
D
Display Component Recycling
Å
WARNING: The backlight contains mercury. Caution should be
exercised when removing and handling the backlight to avoid
damaging this component and causing exposure to the mercury.
Ä
CAUTION: The procedures in this appendix can result in damage to
display components. The only components intended for recycling
purposes are the liquid crystal display (LCD) panel and the backlight.
Careful handling should be exercised when removing these
components.
Disposal
✎ Materials
This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life.
Disposal of mercury may be regulated because of environmental
considerations. For disposal or recycling information, contact
your local authorities or the Electronic Industries Alliance (EIA)
at http://www.eiae.org.
Maintenance and Service Guide
D–1
Display Component Recycling
This appendix provides disassembly instructions for the display
assembly. The display assembly must be disassembled to gain
access to the backlight 1 and the liquid crystal display (LCD)
panel 2.
procedures differ from one display assembly to
✎ Disassembly
another. The procedures provided in this appendix are general
disassembly instructions. Specific details, such as screw sizes,
quantities, and locations, and component shapes and sizes, can
vary from one computer model to another.
D–2
Maintenance and Service Guide
Display Component Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the
display bezel to the display assembly.
Removing the Display Bezel Screw Covers and Screws
Maintenance and Service Guide
D–3
Display Component Recycling
2. Lift up and out on the left and right inside edges 1 and the
top and bottom inside edges 2 of the display bezel until
the bezel disengages from the display assembly.
3. Remove the display bezel 3.
Removing the Display Bezel
D–4
Maintenance and Service Guide
Display Component Recycling
4. Disconnect all display panel cables 1 from the display
inverter and remove the inverter 2.
Removing the Display Inverter
Maintenance and Service Guide
D–5
Display Component Recycling
5. Remove all screws 1 that secure the display panel assembly
to the display enclosure.
6. Remove the display panel assembly 2 from the display
enclosure.
Removing the Display Panel Assembly
7. Turn the display panel assembly upside down.
8. Remove all screws that secure the display panel frame to the
display panel.
Removing the Display Panel Frame Screws
D–6
Maintenance and Service Guide
Display Component Recycling
9. Use a sharp-edged tool to cut the tape 1 that secures the sides
of the display panel to the display panel frame.
10. Remove the display panel frame 2 from the display panel.
Removing the Display Frame
Maintenance and Service Guide
D–7
Display Component Recycling
11. Remove the screws 1 that secure the backlight cover to the
display panel.
12. Lift the top edge of the backlight cover 2 and swing it
forward.
13. Remove the backlight cover.
Removing the Backlight Cover
D–8
Maintenance and Service Guide
Display Component Recycling
14. Turn the display panel right-side up.
15. Remove the backlight cables 1 from the clip 2 in the
display panel.
Releasing the Backlight Cables
Maintenance and Service Guide
D–9
Display Component Recycling
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
Removing the Backlight Frame
D–10
Maintenance and Service Guide
Display Component Recycling
Å
WARNING: The backlight contains mercury. Caution should be
exercised when removing and handling the backlight to avoid
damaging this component and causing exposure to the mercury.
18. Slide the backlight out of the backlight frame.
Removing the Backlight
Maintenance and Service Guide
D–11
Display Component Recycling
19. Disconnect the display cable 1 from the LCD panel.
20. Remove the screws 2 that secure the LCD panel to the
display rear panel.
21. Release the LCD panel 3 from the display rear panel.
22. Release the tape 4 that secures the LCD panel to the display
rear panel.
Releasing the LCD Panel
D–12
Maintenance and Service Guide
Display Component Recycling
23. Remove the LCD panel.
Removing the LCD Panel
Maintenance and Service Guide
D–13
Index
1394 port 1–11
6-in-1 Digital Media Slot 1–7
6-in-1 Digital Media Slot light
1–7
A
AC adapter, spare part
numbers 4–18, 4–21
Altiris Local Recovery 3–8
Application and Driver Recovery disc 3–8, 3–16
applications, reinstalling or
repairing 3–12, 3–14, 3–16
arrow keys 1–15
audio board
removal 6–48
spare part number 4–9,
4–25, 6–48
audio board cable 4–15
audio troubleshooting 2–21
audio-in jack
location 1–9
pin assignments A–2
audio-out jack
location 1–9
pin assignments A–1
Maintenance and Service Guide
B
base enclosure, spare part
numbers 4–9, 4–24
battery bay 1–13, 1–20
battery light 1–7
battery locking latch 1–20
battery pack
removal 6–5
spare part numbers 4–11,
4–22, 4–27
specifications 7–8
battery release latch 1–21
BIOS information, displaying
3–1
Bluetooth board
removal 6–10
spare part number 4–13,
4–22, 6–10
Bluetooth board cable 4–15
bottom components 1–20
C
cables, service considerations
5–2
caps lock key 1–15
caps lock light 1–17
Index–1
Index
carrying cases, spare part
numbers 4–18, 4–21
category, identifying computer
3–2
CD-ROM drive
OS loading problems 2–20
precautions 5–3
removal 6–16
spare part number 4–13,
4–17, 4–26, 6–16
specifications 7–14
components
bottom 1–20
front 1–6
keyboard 1–12, 1–14
left-side 1–10
rear 1–10
right-side 1–8
top 1–16, 1–18
computer feet
illustrated 4–14
locations 6–9
computer model, family, type,
and serial number 3–2
Computer Setup
Advanced Menu 2–4
Main Menu 2–2
overview 2–1
Security Menu 2–3
Tools Menu 2–4
computer specifications 7–1
connector pin assignments
audio-in A–2
audio-out A–1
external monitor A–6
Index–2
headphone A–1
microphone A–2
modem A–7
monitor A–6
network A–8
parallel A–4
RJ-11 A–7
RJ-45 A–8
serial A–3
S-Video-out A–5
Universal Serial Bus (USB)
A–2
connectors, service
considerations 5–2
D
data, safeguarding 3–8
design overview 1–22
digital media board
removal 6–46
spare part number 4–9,
4–24, 6–46
disassembly sequence chart
6–2
diskette drive
OS loading problems 2–19
precautions 5–3
display assembly
removal 6–36
spare part numbers 4–3,
4–23, 6–36
specifications 7–3, 7–4,
7–5
display component recycling
D–1
display lid switch 1–17
Maintenance and Service Guide
Index
display release button 1–6
docking connector 1–20
docking device
spare part number 4–18,
4–23
troubleshooting 2–14
downloading software 3–3
drivers, reinstalling or
repairing 3–16
drives, preventing damage 5–3
DVD/CD-RW Combo Drive
OS loading problems 2–20
precautions 5–3
removal 6–16
spare part number 4–13,
4–17, 4–22, 4–26, 6–16
specifications 7–10
DVD±RW and CD-RW
Combo Drive
OS loading problems 2–20
precautions 5–3
removal 6–16
spare part number 4–13,
4–17, 4–23, 4–26, 4–27,
4–28, 6–16
specifications 7–12
DVD-ROM drive
OS loading problems 2–20
precautions 5–3
removal 6–16
spare part number 4–13,
4–17, 4–22, 4–26, 6–16
specifications 7–9
Maintenance and Service Guide
E
electrostatic discharge 5–4,
5–8
exhaust vents 1–11
external monitor port
location 1–10
pin assignments A–6
External MultiBay cradle,
spare part number 4–18,
4–22
F
f1 to f12 keys 1–15
family, identifying computer
3–2
fan
location 1–21
removal 6–28
spare part number 4–5,
4–24, 6–28
features 1–2
feet
illustrated 4–14
locations 6–9
flowcharts, troubleshooting
no audio 2–21, 2–22
no network/modem
connection 2–26
no OS loading 2–15
no OS loading from
diskette drive 2–19
no OS loading from hard
drive 2–16, 2–17, 2–18
no OS loading from optical
drive 2–20
no power 2–8, 2–10, 2–11
Index–3
Index
no video 2–12, 2–13
nonfunctioning device 2–23
nonfunctioning docking
device 2–14
nonfunctioning keyboard
2–24
nonfunctioning pointing
device 2–25
fn key 1–15
front components 1–6
G
grounding equipment and
methods 5–7
H
hard drive
OS loading problems 2–16
precautions 5–3
removal 6–6
spare part numbers 4–13,
4–17, 4–18, 4–23, 4–26,
6–6
specifications 7–6
hard drive bay 1–21
hard drive cover
illustrated 4–14
removal 6–6
hard drive light 1–7
headphone jack
location 1–9
pin assignments A–1
heat sink
removal 6–29
spare part number 4–5,
4–26, 6–29
HP Web site 3–3
Index–4
I
I/O address specifications
7–19
infrared port 1–6
interrupt specifications 7–17
K
keyboard
removal 6–18
spare part numbers 4–3,
4–5, 4–25, 4–26, 4–27,
4–28, 6–18
troubleshooting 2–24
keyboard components 1–12,
1–14
keypad keys 1–15
L
LED board
removal 6–26
spare part number 4–3,
4–24, 6–26
LED board cable 4–15
left-side components 1–10
M
mass storage devices, spare
part numbers 4–16
memory map specifications
7–22
memory module
removal 6–12, 6–34
spare part numbers 4–9,
4–21, 4–22, 6–12, 6–34
memory module compartment
1–21
Maintenance and Service Guide
Index
memory module/Mini PCI
compartment cover
illustrated 4–14
removal 6–12
microphone jack
location 1–9
pin assignments A–2
Mini PCI communications
module
removal 6–14
spare part numbers 4–11,
4–22, 4–23, 4–26, 4–27,
6–14
Mini PCI compartment 1–21
Miscellaneous Cable Kit
components 4–15
spare part number 4–15,
4–27
Miscellaneous Plastics Kit
components 4–7, 4–14
spare part number 4–7,
4–14, 4–24
Miscellaneous Plastics Kit (for
use with docking device),
spare part number 4–18,
4–26
model, identifying computer
3–2
modem board
removal 6–32
spare part number 4–7,
4–21, 6–32
modem cable
illustrated 4–15
removal 6–53
Maintenance and Service Guide
modem jack
location 1–11
pin assignments A–7
modem, troubleshooting 2–26
monitor port
location 1–10
pin assignments A–6
MultiBay DVD/CD-RW
Combo Drive, spare part
number 4–18
MultiBay DVD-ROM Drive,
spare part number 4–18
N
network jack
location 1–11
pin assignments A–8
network, troubleshooting 2–26
nonfunctioning device,
troubleshooting 2–14, 2–23
num lock key 1–15
num lock light 1–17
O
operating system
System Recovery 3–8
Windows reinstalling or
repairing 3–16
Operating System disc 3–8,
3–12, 3–14
optical drive
location 1–9
OS loading problems 2–20
precautions 5–3
removal 6–16
Index–5
Index
spare part numbers 4–13,
4–18, 4–22, 4–23, 4–26
specifications 7–9, 7–10,
7–12, 7–14
P
packing precautions 5–5
parallel port
location 1–13
pin assignments A–4
PC Card eject buttons 1–11
PC Card slot space saver 4–14
PC Card slots 1–11
plastic parts 5–2
pointing device,
troubleshooting 2–25
pointing stick 1–19
pointing stick board, spare part
number 4–28, 6–39
pointing stick buttons 1–19
power button 1–16
power connector 1–13
power cord
set requirements B–2
spare part numbers 4–20,
4–21
power light 1–7, 1–16
power management features
1–5
power, troubleshooting 2–8
processor
removal 6–30
spare part numbers 4–7,
4–23, 4–24, 6–30
product name and number,
computer 3–2
Index–6
R
rear components 1–10
reinstalling or repairing
software 3–12, 3–14, 3–16
See also System Restore
removal/replacement
preliminaries 5–1
procedures 6–1
restore points 3–9
right-side components 1–8
RJ-11 connector module and
cable
illustrated 4–15
removal 6–53
RJ-11 jack
location 1–11
pin assignments A–7
RJ-45 jack
location 1–11
pin assignments A–8
ROM
downloading and installing
3–4
finding version information
3–1
obtaining updates 3–1
ROMPaq 3–3
RTC battery
illustrated 4–14
removal 6–35
S
Screw Kit
contents C–1
spare part number 4–19,
C–1
Maintenance and Service Guide
Index
screw listing C–1
security cable slot 1–13
serial connector module
removal 6–55
spare part number 4–9,
4–24, 6–55
serial connector module cable
4–15
serial number 3–2, 4–1, 6–1
serial port
location 1–9
pin assignments A–3
service considerations 5–2
snapshot 3–8
SoftPaq 3–3
software
reinstalling or repairing
3–12, 3–14, 3–16
ROMPaq 3–3
SoftPaq 3–3
support CD 3–3
System Restore 3–9
updates 3–3
updating 3–1
speaker
location 1–6
removal 6–43
spare part number 4–9,
4–24, 6–43
specifications
battery pack 7–8
CD-ROM drive 7–14
computer 7–1
display 7–3, 7–4, 7–5
DVD/CD-RW Combo
Drive 7–10
Maintenance and Service Guide
DVD±RW and CD-RW
Combo Drive 7–12
DVD-ROM drive 7–9
hard drive 7–6
I/O addresses 7–19
interrupts 7–17
memory map 7–22
optical drive 7–9, 7–10,
7–12, 7–14
system DMA 7–16
static shielding materials 5–8
S-Video-out jack
location 1–13
pin assignments A–5
switch cover
removal 6–24
spare part numbers 4–3,
4–24, 4–25, 4–27, 6–24
system board
removal 6–50
spare part numbers 4–9,
4–24, 4–27, 6–50
system DMA 7–16
system memory map 7–22
system recovery 3–8
System Restore 3–9
system ROM, downloading
and installing 3–4
T
tools required 5–1
top components 1–16, 1–18
top cover
removal 6–39
spare part numbers 4–7,
4–24, 4–28, 6–39
Index–7
Index
TouchPad 1–19
TouchPad left/right buttons
1–19
TouchPad scroll zone 1–19
transporting precautions 5–5
travel battery connector 1–21
travel battery, spare part
number 4–18, 4–22
troubleshooting
audio 2–21
Computer Setup 2–1
docking device 2–14
flowcharts 2–5
keyboard 2–24
modem 2–26
network 2–26
nonfunctioning device
2–14, 2–23
OS loading 2–15
overview 2–1
pointing device 2–25
power 2–8
video 2–12
USB/audio board
removal 6–48
spare part number 4–9,
4–24, 6–48
V
video troubleshooting 2–12
volume buttons 1–17
W
Windows applications key
1–15
Windows logo key 1–15
wireless button 1–17
wireless light 1–6, 1–17
workstation precautions 5–6
U
Universal Serial Bus (USB)
board cable 4–15
Universal Serial Bus (USB)
diskette drive, spare part
number 4–18, 4–22
Universal Serial Bus (USB)
port
location 1–9, 1–10
pin assignments A–2
Index–8
Maintenance and Service Guide